isci: kill smp_discover_response_protocols in favor of domain_device.dev_type

This is step 1 of removing the contortions to:
1/ unparse expander phy data into a smp discover frame
2/ open-code-parse the smp discover fram into a domain_device.dev_type equivalent

libsas has already spent cycles determining the dev_type, so now that
scic_sds_remote_device is unified with isci_remote_device we can
directly reference dev_type.

This might also change multi-level expander detection as we previously only
looked at dev_type == EDGE_DEV and we did not consider the FANOUT_DEV case.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/core/scic_sds_controller.h

@@ -74,9 +74,9 @@
 #include "scic_sds_port.h"
 #include "scic_sds_phy.h"
 #include "remote_node_table.h"
+#include "remote_device.h"
 #include "scu_registers.h"
 #include "scu_constants.h"
-#include "scu_remote_node_context.h"
 #include "scu_task_context.h"
 #include "scu_unsolicited_frame.h"
 #include "scic_sds_unsolicited_frame_control.h"
@@ -498,14 +498,16 @@ enum scic_sds_controller_states {
 #define scic_sds_io_sequence_increment(value) \
 	((value) = (((value) + 1) & 0x000F))
 
-#define scic_sds_remote_device_node_count(device) \
-	(\
-		(\
-			(device)->target_protocols.u.bits.attached_stp_target \
-			&& ((device)->is_direct_attached != true) \
-		) \
-		? SCU_STP_REMOTE_NODE_COUNT : SCU_SSP_REMOTE_NODE_COUNT	\
-	)
+/* expander attached sata devices require 3 rnc slots */
+static inline int scic_sds_remote_device_node_count(struct scic_sds_remote_device *sci_dev)
+{
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
+
+	if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+	    !sci_dev->is_direct_attached)
+		return SCU_STP_REMOTE_NODE_COUNT;
+	return SCU_SSP_REMOTE_NODE_COUNT;
+}
 
 /**
  * scic_sds_controller_set_invalid_phy() -

drivers/scsi/isci/core/scic_sds_port.c

@@ -434,7 +434,7 @@ void scic_sds_port_get_attached_sas_address(
  *    multi-protocol support.
  *
  */
-void scic_sds_port_get_attached_protocols(
+static void scic_sds_port_get_attached_protocols(
 	struct scic_sds_port *sci_port,
 	struct sci_sas_identify_address_frame_protocols *protocols)
 {

drivers/scsi/isci/core/scic_sds_port.h

@@ -447,8 +447,4 @@ void scic_sds_port_get_attached_sas_address(
 	struct scic_sds_port *sci_port,
 	struct sci_sas_address *sas_address);
 
-void scic_sds_port_get_attached_protocols(
-	struct scic_sds_port *sci_port,
-	struct sci_sas_identify_address_frame_protocols *protocols);
-
 #endif /* _SCIC_SDS_PORT_H_ */

drivers/scsi/isci/core/scic_sds_request.c

@@ -1758,8 +1758,8 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic,
 					  struct scic_sds_request *sci_req,
 					  struct scic_sds_request **new_scic_io_request_handle)
 {
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
 	enum sci_status status = SCI_SUCCESS;
-	struct smp_discover_response_protocols device_protocol;
 
 	/* Build the common part of the request */
 	scic_sds_general_request_construct(scic, sci_dev, io_tag,
@@ -1768,19 +1768,16 @@ enum sci_status scic_io_request_construct(struct scic_sds_controller *scic,
 	if (sci_dev->rnc.remote_node_index == SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX)
 		return SCI_FAILURE_INVALID_REMOTE_DEVICE;
 
-	scic_remote_device_get_protocols(sci_dev, &device_protocol);
-
-	if (device_protocol.u.bits.attached_ssp_target) {
+	if (dev->dev_type == SAS_END_DEV) {
 		scic_sds_ssp_io_request_assign_buffers(sci_req);
-	} else if (device_protocol.u.bits.attached_stp_target) {
+	} else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
 		scic_sds_stp_request_assign_buffers(sci_req);
 		memset(sci_req->command_buffer, 0, sizeof(struct sata_fis_reg_h2d));
-	} else if (device_protocol.u.bits.attached_smp_target) {
+	} else if (dev_is_expander(dev)) {
 		scic_sds_smp_request_assign_buffers(sci_req);
 		memset(sci_req->command_buffer, 0, sizeof(struct smp_request));
-	} else {
+	} else
 		status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
-	}
 
 	if (status == SCI_SUCCESS) {
 		memset(sci_req->task_context_buffer, 0,
@@ -1798,17 +1795,15 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic,
 					    struct scic_sds_request *sci_req,
 					    struct scic_sds_request **new_sci_req)
 {
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
 	enum sci_status status = SCI_SUCCESS;
-	struct smp_discover_response_protocols device_protocol;
 
 	/* Build the common part of the request */
 	scic_sds_general_request_construct(scic, sci_dev, io_tag,
 					   user_io_request_object,
 					   sci_req);
 
-	scic_remote_device_get_protocols(sci_dev, &device_protocol);
-
-	if (device_protocol.u.bits.attached_ssp_target) {
+	if (dev->dev_type == SAS_END_DEV) {
 		scic_sds_ssp_task_request_assign_buffers(sci_req);
 
 		sci_req->has_started_substate_machine = true;
@@ -1820,11 +1815,10 @@ enum sci_status scic_task_request_construct(struct scic_sds_controller *scic,
 			scic_sds_io_request_started_task_mgmt_substate_table,
 			SCIC_SDS_IO_REQUEST_STARTED_TASK_MGMT_SUBSTATE_AWAIT_TC_COMPLETION
 			);
-	} else if (device_protocol.u.bits.attached_stp_target) {
+	} else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))
 		scic_sds_stp_request_assign_buffers(sci_req);
-	} else {
+	else
 		status = SCI_FAILURE_UNSUPPORTED_PROTOCOL;
-	}
 
 	if (status == SCI_SUCCESS) {
 		sci_req->is_task_management_request = true;

drivers/scsi/isci/remote_device.c

@@ -100,13 +100,6 @@ enum sas_linkrate scic_remote_device_get_connection_rate(
 }
 
 
-void scic_remote_device_get_protocols(
-	struct scic_sds_remote_device *sci_dev,
-	struct smp_discover_response_protocols *pr)
-{
-	pr->u.all = sci_dev->target_protocols.u.all;
-}
-
 #if !defined(DISABLE_ATAPI)
 bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev)
 {
@@ -1490,7 +1483,7 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci
 {
 	enum sci_status status;
 	u16 remote_node_index;
-	struct sci_sas_identify_address_frame_protocols protocols;
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
 
 	scic_remote_device_construct(sci_port, sci_dev);
 
@@ -1498,53 +1491,46 @@ static enum sci_status scic_remote_device_da_construct(struct scic_sds_port *sci
 	 * This information is request to determine how many remote node context
 	 * entries will be needed to store the remote node.
 	 */
-	scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols);
-	sci_dev->target_protocols.u.all = protocols.u.all;
 	sci_dev->is_direct_attached = true;
-#if !defined(DISABLE_ATAPI)
-	sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev);
-#endif
+	status = scic_sds_controller_allocate_remote_node_context(sci_port->owning_controller,
+								  sci_dev,
+								  &remote_node_index);
 
-	status = scic_sds_controller_allocate_remote_node_context(
-		sci_dev->owning_port->owning_controller,
-		sci_dev,
-		&remote_node_index);
+	if (status != SCI_SUCCESS)
+		return status;
 
-	if (status == SCI_SUCCESS) {
-		sci_dev->rnc.remote_node_index = remote_node_index;
+	sci_dev->rnc.remote_node_index = remote_node_index;
 
-		scic_sds_port_get_attached_sas_address(
-			sci_dev->owning_port, &sci_dev->device_address);
+	scic_sds_port_get_attached_sas_address(sci_port, &sci_dev->device_address);
 
-		if (sci_dev->target_protocols.u.bits.attached_ssp_target) {
-			sci_dev->has_ready_substate_machine = false;
-		} else if (sci_dev->target_protocols.u.bits.attached_stp_target) {
-			sci_dev->has_ready_substate_machine = true;
+	if (dev->dev_type == SAS_END_DEV)
+		sci_dev->has_ready_substate_machine = false;
+	else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+		sci_dev->has_ready_substate_machine = true;
 
-			sci_base_state_machine_construct(
+		sci_base_state_machine_construct(
 				&sci_dev->ready_substate_machine,
 				&sci_dev->parent,
 				scic_sds_stp_remote_device_ready_substate_table,
 				SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-		} else if (sci_dev->target_protocols.u.bits.attached_smp_target) {
-			sci_dev->has_ready_substate_machine = true;
+	} else if (dev_is_expander(dev)) {
+		sci_dev->has_ready_substate_machine = true;
 
-			/* add the SMP ready substate machine construction here */
-			sci_base_state_machine_construct(
+		/* add the SMP ready substate machine construction here */
+		sci_base_state_machine_construct(
 				&sci_dev->ready_substate_machine,
 				&sci_dev->parent,
 				scic_sds_smp_remote_device_ready_substate_table,
 				SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-		}
+	} else
+		return SCI_FAILURE_UNSUPPORTED_PROTOCOL;
 
-		sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(
-			sci_dev->owning_port);
+	sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed(sci_port);
 
-		/* / @todo Should I assign the port width by reading all of the phys on the port? */
-		sci_dev->device_port_width = 1;
-	}
+	/* / @todo Should I assign the port width by reading all of the phys on the port? */
+	sci_dev->device_port_width = 1;
 
-	return status;
+	return SCI_SUCCESS;
 }
 
 static void scic_sds_remote_device_get_info_from_smp_discover_response(
@@ -1557,8 +1543,6 @@ static void scic_sds_remote_device_get_info_from_smp_discover_response(
 
 	sci_dev->device_address.low =
 		discover_response->attached_sas_address.low;
-
-	sci_dev->target_protocols.u.all = discover_response->protocols.u.all;
 }
 
 /**
@@ -1579,6 +1563,7 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci
 						       struct smp_response_discover *discover_response)
 {
 	struct scic_sds_controller *scic = sci_port->owning_controller;
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
 	enum sci_status status;
 
 	scic_remote_device_construct(sci_port, sci_dev);
@@ -1588,43 +1573,42 @@ static enum sci_status scic_remote_device_ea_construct(struct scic_sds_port *sci
 
 	status = scic_sds_controller_allocate_remote_node_context(
 		scic, sci_dev, &sci_dev->rnc.remote_node_index);
+	if (status != SCI_SUCCESS)
+		return status;
 
-	if (status == SCI_SUCCESS) {
-		if (sci_dev->target_protocols.u.bits.attached_ssp_target) {
-			sci_dev->has_ready_substate_machine = false;
-		} else if (sci_dev->target_protocols.u.bits.attached_smp_target) {
-			sci_dev->has_ready_substate_machine = true;
+	if (dev->dev_type == SAS_END_DEV)
+		sci_dev->has_ready_substate_machine = false;
+	else if (dev_is_expander(dev)) {
+		sci_dev->has_ready_substate_machine = true;
 
-			/* add the SMP ready substate machine construction here */
-			sci_base_state_machine_construct(
+		/* add the SMP ready substate machine construction here */
+		sci_base_state_machine_construct(
 				&sci_dev->ready_substate_machine,
 				&sci_dev->parent,
 				scic_sds_smp_remote_device_ready_substate_table,
 				SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-		} else if (sci_dev->target_protocols.u.bits.attached_stp_target) {
-			sci_dev->has_ready_substate_machine = true;
+	} else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+		sci_dev->has_ready_substate_machine = true;
 
-			sci_base_state_machine_construct(
+		sci_base_state_machine_construct(
 				&sci_dev->ready_substate_machine,
 				&sci_dev->parent,
 				scic_sds_stp_remote_device_ready_substate_table,
 				SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE);
-		}
+	}
 
-		/*
-		 * For SAS-2 the physical link rate is actually a logical link
-		 * rate that incorporates multiplexing.  The SCU doesn't
-		 * incorporate multiplexing and for the purposes of the
-		 * connection the logical link rate is that same as the
-		 * physical.  Furthermore, the SAS-2 and SAS-1.1 fields overlay
-		 * one another, so this code works for both situations. */
-		sci_dev->connection_rate = min_t(u16,
-			scic_sds_port_get_max_allowed_speed(sci_port),
+	/*
+	 * For SAS-2 the physical link rate is actually a logical link
+	 * rate that incorporates multiplexing.  The SCU doesn't
+	 * incorporate multiplexing and for the purposes of the
+	 * connection the logical link rate is that same as the
+	 * physical.  Furthermore, the SAS-2 and SAS-1.1 fields overlay
+	 * one another, so this code works for both situations. */
+	sci_dev->connection_rate = min_t(u16, scic_sds_port_get_max_allowed_speed(sci_port),
 			discover_response->u2.sas1_1.negotiated_physical_link_rate);
 
-		/* / @todo Should I assign the port width by reading all of the phys on the port? */
-		sci_dev->device_port_width = 1;
-	}
+	/* / @todo Should I assign the port width by reading all of the phys on the port? */
+	sci_dev->device_port_width = 1;
 
 	return status;
 }
@@ -1665,7 +1649,7 @@ static enum sci_status isci_remote_device_construct(
 	enum sci_status status = SCI_SUCCESS;
 
 	if (isci_device->domain_dev->parent &&
-	    (isci_device->domain_dev->parent->dev_type == EDGE_DEV)) {
+	    dev_is_expander(isci_device->domain_dev->parent)) {
 		int i;
 
 		/* struct smp_response_discover discover_response; */

drivers/scsi/isci/remote_device.h

@@ -99,11 +99,6 @@ struct scic_sds_remote_device {
 	 */
 	enum sas_linkrate connection_rate;
 
-	/**
-	 * This field contains the allowed target protocols for this remote device.
-	 */
-	struct smp_discover_response_protocols target_protocols;
-
 	/**
 	 * This field contains the device SAS address.
 	 */
@@ -264,23 +259,6 @@ enum sci_status scic_remote_device_reset_complete(
 enum sas_linkrate scic_remote_device_get_connection_rate(
 	struct scic_sds_remote_device *remote_device);
 
-/**
- * scic_remote_device_get_protocols() - This method will indicate which
- *    protocols are supported by this remote device.
- * @remote_device: This parameter specifies the device for which to return the
- *    protocol.
- * @protocols: This parameter specifies the output values, from the remote
- *    device object, which indicate the protocols supported by the supplied
- *    remote_device.
- *
- * The type of protocols supported by this device.  The values are returned as
- * part of a bit mask in order to allow for multi-protocol support.
- */
-void scic_remote_device_get_protocols(
-	struct scic_sds_remote_device *remote_device,
-	struct smp_discover_response_protocols *protocols);
-
-
 #if !defined(DISABLE_ATAPI)
 /**
  * scic_remote_device_is_atapi() -
@@ -477,6 +455,18 @@ static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_n
 	return sci_dev;
 }
 
+static inline struct domain_device *sci_dev_to_domain(struct scic_sds_remote_device *sci_dev)
+{
+	struct isci_remote_device *idev = container_of(sci_dev, typeof(*idev), sci);
+
+	return idev->domain_dev;
+}
+
+static inline bool dev_is_expander(struct domain_device *dev)
+{
+	return dev->dev_type == EDGE_DEV || dev->dev_type == FANOUT_DEV;
+}
+
 typedef enum sci_status (*scic_sds_remote_device_request_handler_t)(
 	struct scic_sds_remote_device *device,
 	struct scic_sds_request *request);

drivers/scsi/isci/remote_node_context.c

@@ -106,8 +106,9 @@ bool scic_sds_remote_node_context_is_ready(
 static void scic_sds_remote_node_context_construct_buffer(
 	struct scic_sds_remote_node_context *sci_rnc)
 {
-	union scu_remote_node_context *rnc;
 	struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc);
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
+	union scu_remote_node_context *rnc;
 	struct scic_sds_controller *scic;
 
 	scic = scic_sds_remote_device_get_controller(sci_dev);
@@ -134,11 +135,7 @@ static void scic_sds_remote_node_context_construct_buffer(
 
 	rnc->ssp.arbitration_wait_time = 0;
 
-
-	if (
-		sci_dev->target_protocols.u.bits.attached_sata_device
-		|| sci_dev->target_protocols.u.bits.attached_stp_target
-		) {
+	if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
 		rnc->ssp.connection_occupancy_timeout =
 			scic->user_parameters.sds1.stp_max_occupancy_timeout;
 		rnc->ssp.connection_inactivity_timeout =
@@ -639,45 +636,30 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha
 	scics_sds_remote_node_context_callback callback,
 	void *callback_parameter)
 {
-	enum sci_status status;
-	struct smp_discover_response_protocols protocols;
+	struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc);
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
+	enum sci_status status = SCI_SUCCESS;
 
-	scic_sds_remote_node_context_setup_to_resume(
-		sci_rnc, callback, callback_parameter
-		);
+	scic_sds_remote_node_context_setup_to_resume(sci_rnc, callback,
+						     callback_parameter);
 
 	/* TODO: consider adding a resume action of NONE, INVALIDATE, WRITE_TLCR */
-
-	scic_remote_device_get_protocols(rnc_to_dev(sci_rnc), &protocols);
-
-	if (
-		(protocols.u.bits.attached_ssp_target == 1)
-		|| (protocols.u.bits.attached_smp_target == 1)
-		) {
-		sci_base_state_machine_change_state(
-			&sci_rnc->state_machine,
-			SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE
-			);
-
-		status = SCI_SUCCESS;
-	} else if (protocols.u.bits.attached_stp_target == 1) {
-		if (rnc_to_dev(sci_rnc)->is_direct_attached) {
+	if (dev->dev_type == SAS_END_DEV || dev_is_expander(dev))
+		sci_base_state_machine_change_state(&sci_rnc->state_machine,
+						    SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE);
+	else if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
+		if (sci_dev->is_direct_attached) {
 			/* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */
 			sci_base_state_machine_change_state(
 				&sci_rnc->state_machine,
-				SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE
-				);
+				SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE);
 		} else {
 			sci_base_state_machine_change_state(
 				&sci_rnc->state_machine,
-				SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE
-				);
+				SCIC_SDS_REMOTE_NODE_CONTEXT_INVALIDATING_STATE);
 		}
-
-		status = SCI_SUCCESS;
-	} else {
+	} else
 		status = SCI_FAILURE;
-	}
 
 	return status;
 }
@@ -932,6 +914,7 @@ static void scic_sds_remote_node_context_validate_context_buffer(
 	struct scic_sds_remote_node_context *sci_rnc)
 {
 	struct scic_sds_remote_device *sci_dev = rnc_to_dev(sci_rnc);
+	struct domain_device *dev = sci_dev_to_domain(sci_dev);
 	union scu_remote_node_context *rnc_buffer;
 
 	rnc_buffer = scic_sds_controller_get_remote_node_context_buffer(
@@ -942,7 +925,7 @@ static void scic_sds_remote_node_context_validate_context_buffer(
 	rnc_buffer->ssp.is_valid = true;
 
 	if (!sci_dev->is_direct_attached &&
-	    sci_dev->target_protocols.u.bits.attached_stp_target) {
+	    (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP))) {
 		scic_sds_remote_device_post_request(sci_dev,
 						    SCU_CONTEXT_COMMAND_POST_RNC_96);
 	} else {
@@ -1063,11 +1046,12 @@ static void scic_sds_remote_node_context_resuming_state_enter(
 	struct sci_base_object *object)
 {
 	struct scic_sds_remote_node_context *rnc;
-	struct smp_discover_response_protocols protocols;
 	struct scic_sds_remote_device *sci_dev;
+	struct domain_device *dev;
 
 	rnc = (struct scic_sds_remote_node_context *)object;
 	sci_dev = rnc_to_dev(rnc);
+	dev = sci_dev_to_domain(sci_dev);
 
 	SET_STATE_HANDLER(
 		rnc,
@@ -1081,13 +1065,10 @@ static void scic_sds_remote_node_context_resuming_state_enter(
 	 * resume because of a target reset we also need to update
 	 * the STPTLDARNI register with the RNi of the device
 	 */
-	scic_remote_device_get_protocols(sci_dev, &protocols);
-
-	if (protocols.u.bits.attached_stp_target == 1 &&
-	    sci_dev->is_direct_attached) {
+	if ((dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) &&
+	    sci_dev->is_direct_attached)
 		scic_sds_port_setup_transports(sci_dev->owning_port,
 					       rnc->remote_node_index);
-	}
 
 	scic_sds_remote_device_post_request(sci_dev, SCU_CONTEXT_COMMAND_POST_RNC_RESUME);
 }

drivers/scsi/isci/request.c

@@ -175,7 +175,6 @@ static enum sci_status isci_io_request_build(
 	struct isci_request *request,
 	struct isci_remote_device *isci_device)
 {
-	struct smp_discover_response_protocols dev_protocols;
 	enum sci_status status = SCI_SUCCESS;
 	struct sas_task *task = isci_request_access_task(request);
 	struct scic_sds_remote_device *sci_device = &isci_device->sci;
@@ -228,15 +227,19 @@ static enum sci_status isci_io_request_build(
 
 	sci_object_set_association(request->sci_request_handle, request);
 
-	/* Determine protocol and call the appropriate basic constructor */
-	scic_remote_device_get_protocols(sci_device, &dev_protocols);
-	if (dev_protocols.u.bits.attached_ssp_target)
+	switch (task->task_proto) {
+	case SAS_PROTOCOL_SMP:
+		status = isci_smp_request_build(request);
+		break;
+	case SAS_PROTOCOL_SSP:
 		status = isci_request_ssp_request_construct(request);
-	else if (dev_protocols.u.bits.attached_stp_target)
+		break;
+	case SAS_PROTOCOL_SATA:
+	case SAS_PROTOCOL_STP:
+	case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
 		status = isci_request_stp_request_construct(request);
-	else if (dev_protocols.u.bits.attached_smp_target)
-		status = isci_smp_request_build(request);
-	else {
+		break;
+	default:
 		dev_warn(&isci_host->pdev->dev,
 			 "%s: unknown protocol\n", __func__);
 		return SCI_FAILURE;

drivers/scsi/isci/task.c

@@ -273,15 +273,14 @@ static enum sci_status isci_task_request_build(
 	enum sci_status status = SCI_FAILURE;
 	struct isci_request *request = NULL;
 	struct isci_remote_device *isci_device;
-/*	struct sci_sas_identify_address_frame_protocols dev_protocols; */
-	struct smp_discover_response_protocols dev_protocols;
-
+	struct domain_device *dev;
 
 	dev_dbg(&isci_host->pdev->dev,
 		"%s: isci_tmf = %p\n", __func__, isci_tmf);
 
 	isci_device = isci_tmf->device;
 	sci_device = &isci_device->sci;
+	dev = isci_device->domain_dev;
 
 	/* do common allocation and init of request object. */
 	status = isci_request_alloc_tmf(
@@ -319,16 +318,8 @@ static enum sci_status isci_task_request_build(
 		request
 		);
 
-	scic_remote_device_get_protocols(
-		sci_device,
-		&dev_protocols
-		);
-
-	/* let the core do it's protocol
-	 * specific construction.
-	 */
-	if (dev_protocols.u.bits.attached_ssp_target) {
-
+	/* XXX convert to get this from task->tproto like other drivers */
+	if (dev->dev_type == SAS_END_DEV) {
 		isci_tmf->proto = SAS_PROTOCOL_SSP;
 		status = scic_task_request_construct_ssp(
 			request->sci_request_handle
@@ -337,8 +328,7 @@ static enum sci_status isci_task_request_build(
 			goto errout;
 	}
 
-	if (dev_protocols.u.bits.attached_stp_target) {
-
+	if (dev->dev_type == SATA_DEV || (dev->tproto & SAS_PROTOCOL_STP)) {
 		isci_tmf->proto = SAS_PROTOCOL_SATA;
 		status = isci_sata_management_task_request_build(request);