Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:

	drivers/net/wireless/p54/p54common.c

.mailmap

@@ -80,6 +80,8 @@ Nguyen Anh Quynh <aquynh@gmail.com>
 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
 Peter A Jonsson <pj@ludd.ltu.se>
+Peter Oruba <peter@oruba.de>
+Peter Oruba <peter.oruba@amd.com>
 Praveen BP <praveenbp@ti.com>
 Rajesh Shah <rajesh.shah@intel.com>
 Ralf Baechle <ralf@linux-mips.org>

Documentation/00-INDEX

@@ -172,7 +172,7 @@ i2c/
 	- directory with info about the I2C bus/protocol (2 wire, kHz speed).
 i2o/
 	- directory with info about the Linux I2O subsystem.
-i386/
+x86/i386/
 	- directory with info about Linux on Intel 32 bit architecture.
 ia64/
 	- directory with info about Linux on Intel 64 bit architecture.
@@ -382,7 +382,7 @@ w1/
 	- directory with documents regarding the 1-wire (w1) subsystem.
 watchdog/
 	- how to auto-reboot Linux if it has "fallen and can't get up". ;-)
-x86_64/
+x86/x86_64/
 	- directory with info on Linux support for AMD x86-64 (Hammer) machines.
 zorro.txt
 	- info on writing drivers for Zorro bus devices found on Amigas.

Documentation/DocBook/Makefile

@@ -136,7 +136,7 @@ quiet_cmd_db2ps = PS      $@
 %.ps : %.xml
 	$(call cmd,db2ps)
 
-quiet_cmd_db2pdf = PDF      $@
+quiet_cmd_db2pdf = PDF     $@
       cmd_db2pdf = $(subst TYPE,pdf, $($(PDF_METHOD)template))
 %.pdf : %.xml
 	$(call cmd,db2pdf)
@@ -148,7 +148,7 @@ build_main_index = rm -rf $(main_idx) && \
 		   echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
 		   cat $(HTML) >> $(main_idx)
 
-quiet_cmd_db2html = HTML   $@
+quiet_cmd_db2html = HTML    $@
       cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
 		echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
         $(patsubst %.html,%,$(notdir $@))</a><p>' > $@

Documentation/DocBook/deviceiobook.tmpl

@@ -24,7 +24,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/DocBook/mcabook.tmpl

@@ -12,7 +12,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/DocBook/wanbook.tmpl

@@ -12,7 +12,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/DocBook/z8530book.tmpl

@@ -12,7 +12,7 @@
     <surname>Cox</surname>
     <affiliation>
      <address>
-      <email>alan@redhat.com</email>
+      <email>alan@lxorguk.ukuu.org.uk</email>
      </address>
     </affiliation>
    </author>

Documentation/ManagementStyle

@@ -17,7 +17,7 @@ companies.  If you sign purchase orders or you have any clue about the
 budget of your group, you're almost certainly not a kernel manager. 
 These suggestions may or may not apply to you. 
 
-First off, I'd suggest buying "Seven Habits of Highly Successful
+First off, I'd suggest buying "Seven Habits of Highly Effective
 People", and NOT read it.  Burn it, it's a great symbolic gesture. 
 
 (*) This document does so not so much by answering the question, but by

Documentation/accounting/.gitignore

@@ -0,0 +1 @@
+getdelays

Documentation/arm/empeg/README

@@ -1,13 +0,0 @@
-Empeg, Ltd's Empeg MP3 Car Audio Player
-
-The initial design is to go in your car, but you can use it at home, on a
-boat... almost anywhere. The principle is to store CD-quality music using
-MPEG technology onto a hard disk in the unit, and use the power of the
-embedded computer to serve up the music you want.
-
-For more details, see:
-
-	http://www.empeg.com
-
-
-

Documentation/arm/empeg/ir.txt

@@ -1,49 +0,0 @@
-Infra-red driver documentation.
-
-Mike Crowe <mac@empeg.com>
-(C) Empeg Ltd 1999
-
-Not a lot here yet :-)
-
-The Kenwood KCA-R6A remote control generates a sequence like the following:
-
-Go low for approx 16T (Around 9000us)
-Go high for approx 8T (Around 4000us)
-Go low for less than 2T (Around 750us)
-
-For each of the 32 bits
-  Go high for more than 2T (Around 1500us) == 1
-  Go high for less than T (Around 400us) == 0
-  Go low for less than 2T (Around 750us)
-
-Rather than repeat a signal when the button is held down certain buttons
-generate the following code to indicate repetition.
-
-Go low for approx 16T
-Go high for approx 4T
-Go low for less than 2T
-
-(By removing the <2T from the start of the sequence and placing at the end
- it can be considered a stop bit but I found it easier to deal with it at
- the start).
-
-The 32 bits are encoded as XxYy where x and y are the actual data values
-while X and Y are the logical inverses of the associated data values. Using 
-LSB first yields sensible codes for the numbers.
-
-All codes are of the form b9xx
-
-The numeric keys generate the code 0x where x is the number pressed.
-
-Tuner		1c
-Tape		1d
-CD		1e
-CD-MD-CH	1f
-Track-		0a
-Track+		0b
-Rewind		0c
-FF		0d
-DNPP		5e
-Play/Pause	0e
-Vol+		14
-Vol-		15

Documentation/arm/empeg/mkdevs

@@ -1,11 +0,0 @@
-#!/bin/sh
-mknod /dev/display c 244 0
-mknod /dev/ir c 242 0
-mknod /dev/usb0 c 243 0
-mknod /dev/audio c 245 4
-mknod /dev/dsp c 245 3
-mknod /dev/mixer c 245 0
-mknod /dev/empeg_state c 246 0
-mknod /dev/radio0 c 81 64
-ln -sf radio0 radio
-ln -sf usb0 usb

Documentation/auxdisplay/.gitignore

@@ -0,0 +1 @@
+cfag12864b-example

Documentation/connector/.gitignore

@@ -0,0 +1 @@
+ucon

Documentation/filesystems/Locking

@@ -161,8 +161,12 @@ prototypes:
 	int (*set_page_dirty)(struct page *page);
 	int (*readpages)(struct file *filp, struct address_space *mapping,
 			struct list_head *pages, unsigned nr_pages);
-	int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
-	int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
+	int (*write_begin)(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned flags,
+				struct page **pagep, void **fsdata);
+	int (*write_end)(struct file *, struct address_space *mapping,
+				loff_t pos, unsigned len, unsigned copied,
+				struct page *page, void *fsdata);
 	sector_t (*bmap)(struct address_space *, sector_t);
 	int (*invalidatepage) (struct page *, unsigned long);
 	int (*releasepage) (struct page *, int);
@@ -180,8 +184,6 @@ sync_page:		no	maybe
 writepages:		no
 set_page_dirty		no	no
 readpages:		no
-prepare_write:		no	yes			yes
-commit_write:		no	yes			yes
 write_begin:		no	locks the page		yes
 write_end:		no	yes, unlocks		yes
 perform_write:		no	n/a			yes
@@ -191,7 +193,7 @@ releasepage:		no	yes
 direct_IO:		no
 launder_page:		no	yes
 
-	->prepare_write(), ->commit_write(), ->sync_page() and ->readpage()
+	->write_begin(), ->write_end(), ->sync_page() and ->readpage()
 may be called from the request handler (/dev/loop).
 
 	->readpage() unlocks the page, either synchronously or via I/O

Documentation/filesystems/vfs.txt

@@ -492,7 +492,7 @@ written-back to storage typically in whole pages, however the
 address_space has finer control of write sizes.
 
 The read process essentially only requires 'readpage'.  The write
-process is more complicated and uses prepare_write/commit_write or
+process is more complicated and uses write_begin/write_end or
 set_page_dirty to write data into the address_space, and writepage,
 sync_page, and writepages to writeback data to storage.
 
@@ -521,8 +521,6 @@ struct address_space_operations {
 	int (*set_page_dirty)(struct page *page);
 	int (*readpages)(struct file *filp, struct address_space *mapping,
 			struct list_head *pages, unsigned nr_pages);
-	int (*prepare_write)(struct file *, struct page *, unsigned, unsigned);
-	int (*commit_write)(struct file *, struct page *, unsigned, unsigned);
 	int (*write_begin)(struct file *, struct address_space *mapping,
 				loff_t pos, unsigned len, unsigned flags,
 				struct page **pagep, void **fsdata);
@@ -598,37 +596,7 @@ struct address_space_operations {
 	readpages is only used for read-ahead, so read errors are
   	ignored.  If anything goes wrong, feel free to give up.
 
-  prepare_write: called by the generic write path in VM to set up a write
-  	request for a page.  This indicates to the address space that
-  	the given range of bytes is about to be written.  The
-  	address_space should check that the write will be able to
-  	complete, by allocating space if necessary and doing any other
-  	internal housekeeping.  If the write will update parts of
-  	any basic-blocks on storage, then those blocks should be
-  	pre-read (if they haven't been read already) so that the
-  	updated blocks can be written out properly.
-	The page will be locked.
-
-	Note: the page _must not_ be marked uptodate in this function
-	(or anywhere else) unless it actually is uptodate right now. As
-	soon as a page is marked uptodate, it is possible for a concurrent
-	read(2) to copy it to userspace.
-
-  commit_write: If prepare_write succeeds, new data will be copied
-        into the page and then commit_write will be called.  It will
-        typically update the size of the file (if appropriate) and
-        mark the inode as dirty, and do any other related housekeeping
-        operations.  It should avoid returning an error if possible -
-        errors should have been handled by prepare_write.
-
-  write_begin: This is intended as a replacement for prepare_write. The
-	key differences being that:
-		- it returns a locked page (in *pagep) rather than being
-		  given a pre locked page;
-		- it must be able to cope with short writes (where the
-		  length passed to write_begin is greater than the number
-		  of bytes copied into the page).
-
+  write_begin:
 	Called by the generic buffered write code to ask the filesystem to
 	prepare to write len bytes at the given offset in the file. The
 	address_space should check that the write will be able to complete,
@@ -640,6 +608,9 @@ struct address_space_operations {
         The filesystem must return the locked pagecache page for the specified
 	offset, in *pagep, for the caller to write into.
 
+	It must be able to cope with short writes (where the length passed to
+	write_begin is greater than the number of bytes copied into the page).
+
 	flags is a field for AOP_FLAG_xxx flags, described in
 	include/linux/fs.h.
 

Documentation/ftrace.txt

@@ -291,6 +291,9 @@ explains which is which.
   CPU#: The CPU which the process was running on.
 
   irqs-off: 'd' interrupts are disabled. '.' otherwise.
+	    Note: If the architecture does not support a way to
+		  read the irq flags variable, an 'X' will always
+		  be printed here.
 
   need-resched: 'N' task need_resched is set, '.' otherwise.
 

Documentation/i2c/busses/i2c-sis96x

@@ -42,7 +42,7 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+via the linux-i2c mailing list: <linux-i2c@vger.kernel.org>.  Please send bug
 reports and/or success stories as well.
 
 

Documentation/ia64/.gitignore

@@ -0,0 +1 @@
+aliasing-test

Documentation/isdn/CREDITS

@@ -5,7 +5,7 @@ I want to thank all who contributed to this project and especially to:
 Thomas Bogendörfer (tsbogend@bigbug.franken.de)
   Tester, lots of bugfixes and hints.
 
-Alan Cox (alan@redhat.com)
+Alan Cox (alan@lxorguk.ukuu.org.uk)
   For help getting into standard-kernel.
 
 Henner Eisen (eis@baty.hanse.de)

Documentation/ja_JP/HOWTO

@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2008/08/21
+Last Updated: 2008/10/24
 ==================================
 これは、
-linux-2.6.27/Documentation/HOWTO
+linux-2.6.28/Documentation/HOWTO
 の和訳です。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2008/8/5
+翻訳日： 2008/10/24
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -110,8 +110,8 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを
 新しいドキュメントファイルも追加することを勧めます。
 カーネルの変更が、カーネルがユーザ空間に公開しているインターフェイスの
 変更を引き起こす場合、その変更を説明するマニュアルページのパッチや情報
-をマニュアルページのメンテナ mtk.manpages@gmail.com に送ることを勧めま
-す。
+をマニュアルページのメンテナ mtk.manpages@gmail.com に送り、CC を
+linux-api@ver.kernel.org に送ることを勧めます。
 
 以下はカーネルソースツリーに含まれている読んでおくべきファイルの一覧で
 す-
@@ -149,7 +149,7 @@ Linux カーネルソースツリーは幅広い範囲のドキュメントを
      この他にパッチを作る方法についてのよくできた記述は-
 
 	"The Perfect Patch"
-		http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+		http://userweb.kernel.org/~akpm/stuff/tpp.txt
 	"Linux kernel patch submission format"
 		http://linux.yyz.us/patch-format.html
 
@@ -664,7 +664,7 @@ Linux カーネルコミュニティは、一度に大量のコードの塊を
 これについて全てがどのようにあるべきかについての詳細は、以下のドキュメ
 ントの ChangeLog セクションを見てください-
   "The Perfect Patch"
-      http://www.zip.com.au/~akpm/linux/patches/stuff/tpp.txt
+      http://userweb.kernel.org/~akpm/stuff/tpp.txt
 
 これらのどれもが、時にはとても困難です。これらの慣例を完璧に実施するに
 は数年かかるかもしれません。これは継続的な改善のプロセスであり、そのた

Documentation/kernel-parameters.txt

@@ -100,7 +100,7 @@ parameter is applicable:
 	X86-32	X86-32, aka i386 architecture is enabled.
 	X86-64	X86-64 architecture is enabled.
 			More X86-64 boot options can be found in
-			Documentation/x86_64/boot-options.txt .
+			Documentation/x86/x86_64/boot-options.txt .
 	X86	Either 32bit or 64bit x86 (same as X86-32+X86-64)
 
 In addition, the following text indicates that the option:
@@ -112,10 +112,10 @@ In addition, the following text indicates that the option:
 Parameters denoted with BOOT are actually interpreted by the boot
 loader, and have no meaning to the kernel directly.
 Do not modify the syntax of boot loader parameters without extreme
-need or coordination with <Documentation/i386/boot.txt>.
+need or coordination with <Documentation/x86/i386/boot.txt>.
 
 There are also arch-specific kernel-parameters not documented here.
-See for example <Documentation/x86_64/boot-options.txt>.
+See for example <Documentation/x86/x86_64/boot-options.txt>.
 
 Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
 a trailing = on the name of any parameter states that that parameter will
@@ -1222,7 +1222,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	mce		[X86-32] Machine Check Exception
 
-	mce=option	[X86-64] See Documentation/x86_64/boot-options.txt
+	mce=option	[X86-64] See Documentation/x86/x86_64/boot-options.txt
 
 	md=		[HW] RAID subsystems devices and level
 			See Documentation/md.txt.
@@ -1728,7 +1728,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/paride.txt.
 
 	pirq=		[SMP,APIC] Manual mp-table setup
-			See Documentation/i386/IO-APIC.txt.
+			See Documentation/x86/i386/IO-APIC.txt.
 
 	plip=		[PPT,NET] Parallel port network link
 			Format: { parport<nr> | timid | 0 }
@@ -2343,7 +2343,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			See Documentation/fb/modedb.txt.
 
 	vga=		[BOOT,X86-32] Select a particular video mode
-			See Documentation/i386/boot.txt and
+			See Documentation/x86/i386/boot.txt and
 			Documentation/svga.txt.
 			Use vga=ask for menu.
 			This is actually a boot loader parameter; the value is

Documentation/lguest/Makefile

@@ -1,5 +1,5 @@
 # This creates the demonstration utility "lguest" which runs a Linux guest.
-CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include
+CFLAGS:=-Wall -Wmissing-declarations -Wmissing-prototypes -O3 -I../../include -I../../arch/x86/include
 LDLIBS:=-lz
 
 all: lguest

Documentation/lguest/lguest.c

@@ -44,7 +44,7 @@
 #include "linux/virtio_console.h"
 #include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
-#include "asm-x86/bootparam.h"
+#include "asm/bootparam.h"
 /*L:110 We can ignore the 39 include files we need for this program, but I do
  * want to draw attention to the use of kernel-style types.
  *
@@ -402,7 +402,7 @@ static unsigned long load_bzimage(int fd)
 	void *p = from_guest_phys(0x100000);
 
 	/* Go back to the start of the file and read the header.  It should be
-	 * a Linux boot header (see Documentation/i386/boot.txt) */
+	 * a Linux boot header (see Documentation/x86/i386/boot.txt) */
 	lseek(fd, 0, SEEK_SET);
 	read(fd, &boot, sizeof(boot));
 

Documentation/networking/.gitignore

@@ -0,0 +1 @@
+ifenslave

Documentation/networking/dmfe.txt

@@ -60,6 +60,6 @@ Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
 Contributors:
 
 Marcelo Tosatti <marcelo@conectiva.com.br>
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
 Jeff Garzik <jgarzik@pobox.com>
 Vojtech Pavlik <vojtech@suse.cz>

Documentation/pcmcia/.gitignore

@@ -0,0 +1 @@
+crc32hash

Documentation/scheduler/00-INDEX

@@ -4,8 +4,6 @@ sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
 sched-coding.txt
 	- reference for various scheduler-related methods in the O(1) scheduler.
-sched-design.txt
-	- goals, design and implementation of the Linux O(1) scheduler.
 sched-design-CFS.txt
 	- goals, design and implementation of the Complete Fair Scheduler.
 sched-domains.txt

Documentation/scheduler/sched-design-CFS.txt

@@ -92,7 +92,7 @@ other HZ detail.  Thus the CFS scheduler has no notion of "timeslices" in the
 way the previous scheduler had, and has no heuristics whatsoever.  There is
 only one central tunable (you have to switch on CONFIG_SCHED_DEBUG):
 
-   /proc/sys/kernel/sched_granularity_ns
+   /proc/sys/kernel/sched_min_granularity_ns
 
 which can be used to tune the scheduler from "desktop" (i.e., low latencies) to
 "server" (i.e., good batching) workloads.  It defaults to a setting suitable

Documentation/scsi/aacraid.txt

@@ -128,7 +128,7 @@ Supported Cards/Chipsets
 
 People
 -------------------------
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
 Christoph Hellwig <hch@infradead.org>	(updates for new-style PCI probing and SCSI host registration,
 					 small cleanups/fixes)
 Matt Domsch <matt_domsch@dell.com>	(revision ioctl, adapter messages)

Documentation/spi/.gitignore

@@ -0,0 +1,2 @@
+spidev_fdx
+spidev_test

Documentation/stable_kernel_rules.txt

@@ -12,6 +12,7 @@ Rules on what kind of patches are accepted, and which ones are not, into the
    marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
    security issue, or some "oh, that's not good" issue.  In short, something
    critical.
+ - New device IDs and quirks are also accepted.
  - No "theoretical race condition" issues, unless an explanation of how the
    race can be exploited is also provided.
  - It cannot contain any "trivial" fixes in it (spelling changes,

Documentation/sysctl/kernel.txt

@@ -363,11 +363,21 @@ tainted:
 Non-zero if the kernel has been tainted.  Numeric values, which
 can be ORed together:
 
-  1 - A module with a non-GPL license has been loaded, this
-      includes modules with no license.
-      Set by modutils >= 2.4.9 and module-init-tools.
-  2 - A module was force loaded by insmod -f.
-      Set by modutils >= 2.4.9 and module-init-tools.
-  4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
- 64 - A module from drivers/staging was loaded.
+   1 - A module with a non-GPL license has been loaded, this
+       includes modules with no license.
+       Set by modutils >= 2.4.9 and module-init-tools.
+   2 - A module was force loaded by insmod -f.
+       Set by modutils >= 2.4.9 and module-init-tools.
+   4 - Unsafe SMP processors: SMP with CPUs not designed for SMP.
+   8 - A module was forcibly unloaded from the system by rmmod -f.
+  16 - A hardware machine check error occurred on the system.
+  32 - A bad page was discovered on the system.
+  64 - The user has asked that the system be marked "tainted".  This
+       could be because they are running software that directly modifies
+       the hardware, or for other reasons.
+ 128 - The system has died.
+ 256 - The ACPI DSDT has been overridden with one supplied by the user
+        instead of using the one provided by the hardware.
+ 512 - A kernel warning has occurred.
+1024 - A module from drivers/staging was loaded.
 

Documentation/video4linux/.gitignore

@@ -0,0 +1 @@
+v4lgrab

Documentation/video4linux/bttv/CONTRIBUTORS

@@ -3,7 +3,7 @@ Contributors to bttv:
 Michael Chu <mmchu@pobox.com>
   AverMedia fix and more flexible card recognition
 
-Alan Cox <alan@redhat.com>
+Alan Cox <alan@lxorguk.ukuu.org.uk>
   Video4Linux interface and 2.1.x kernel adaptation
 
 Chris Kleitsch

Documentation/vm/.gitignore

@@ -0,0 +1 @@
+slabinfo

Documentation/watchdog/src/.gitignore

@@ -0,0 +1,2 @@
+watchdog-simple
+watchdog-test

Documentation/x86/x86_64/boot-options.txt

@@ -35,7 +35,7 @@ APICs
 
    nolapic	 Don't use the local APIC (alias for i386 compatibility)
 
-   pirq=...	 See Documentation/i386/IO-APIC.txt
+   pirq=...	 See Documentation/x86/i386/IO-APIC.txt
 
    noapictimer	 Don't set up the APIC timer
 
@@ -139,7 +139,7 @@ Non Executable Mappings
 SMP
 
   additional_cpus=NUM Allow NUM more CPUs for hotplug
-		 (defaults are specified by the BIOS, see Documentation/x86_64/cpu-hotplug-spec)
+		 (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec)
 
 NUMA
 

Documentation/x86/x86_64/fake-numa-for-cpusets

@@ -10,7 +10,7 @@ amount of system memory that are available to a certain class of tasks.
 For more information on the features of cpusets, see Documentation/cpusets.txt.
 There are a number of different configurations you can use for your needs.  For
 more information on the numa=fake command line option and its various ways of
-configuring fake nodes, see Documentation/x86_64/boot-options.txt.
+configuring fake nodes, see Documentation/x86/x86_64/boot-options.txt.
 
 For the purposes of this introduction, we'll assume a very primitive NUMA
 emulation setup of "numa=fake=4*512,".  This will split our system memory into

MAINTAINERS

@@ -347,7 +347,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:	Rudolf Marek
 M:	r.marek@assembler.cz
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 ALPHA PORT
@@ -610,6 +610,11 @@ P:	Philipp Zabel
 M:	philipp.zabel@gmail.com
 S:	Maintained
 
+ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
+P:	Michael Petchkovsky
+M:	mkpetch@internode.on.net
+S:	Maintained
+
 ARM/TOSA MACHINE SUPPORT
 P:	Dmitry Baryshkov
 M:	dbaryshkov@gmail.com
@@ -738,6 +743,8 @@ P:	Nick Kossifidis
 M:	mickflemm@gmail.com
 P:	Luis R. Rodriguez
 M:	mcgrof@gmail.com
+P:	Bob Copeland
+M:	me@bobcopeland.com
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
@@ -1744,7 +1751,7 @@ FREESCALE I2C CPM DRIVER
 P:	Jochen Friedrich
 M:	jochen@scram.de
 L:	linuxppc-dev@ozlabs.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 FREESCALE SOC FS_ENET DRIVER
@@ -2017,7 +2024,7 @@ S:	Maintained
 I2C/SMBUS STUB DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 I2C SUBSYSTEM
@@ -2025,14 +2032,14 @@ P:	Jean Delvare (PC drivers, core)
 M:	khali@linux-fr.org
 P:	Ben Dooks (embedded platforms)
 M:	ben-linux@fluff.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 T:	quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
 S:	Maintained
 
 I2C-TINY-USB DRIVER
 P:	Till Harbaum
 M:	till@harbaum.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 T:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
 
@@ -2696,6 +2703,16 @@ M:	matthew@wil.cx
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+LTP (Linux Test Project)
+P:	Subrata Modak
+M:	subrata@linux.vnet.ibm.com
+P:	Mike Frysinger
+M:	vapier@gentoo.org
+L:	ltp-list@lists.sourceforge.net (subscribers-only)
+W:	http://ltp.sourceforge.net/
+T:	git kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
+S:	Maintained
+
 M32R ARCHITECTURE
 P:	Hirokazu Takata
 M:	takata@linux-m32r.org
@@ -3138,7 +3155,7 @@ S:	Maintained
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 OPROFILE
@@ -3185,7 +3202,7 @@ S:	Maintained
 PA SEMI SMBUS DRIVER
 P:	Olof Johansson
 M:	olof@lixom.net
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
@@ -3330,7 +3347,7 @@ S:	Maintained
 PNXxxxx I2C DRIVER
 P:	Vitaly Wool
 M:	vitalywool@gmail.com
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
@@ -3794,7 +3811,7 @@ S:	Maintained
 SIS 96X I2C/SMBUS DRIVER
 P:	Mark M. Hoffman
 M:	mhoffman@lightlink.com
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 SIS FRAMEBUFFER DRIVER
@@ -4541,7 +4558,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	i2c@lm-sensors.org
+L:	linux-i2c@vger.kernel.org
 S:	Maintained
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER

Makefile

@@ -536,7 +536,7 @@ KBUILD_CFLAGS	+= -g
 KBUILD_AFLAGS	+= -gdwarf-2
 endif
 
-ifdef CONFIG_FTRACE
+ifdef CONFIG_FUNCTION_TRACER
 KBUILD_CFLAGS	+= -pg
 endif
 
@@ -961,6 +961,7 @@ export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
 # The asm symlink changes when $(ARCH) changes.
 # Detect this and ask user to run make mrproper
+# If asm is a stale symlink (point to dir that does not exist) remove it
 define check-symlink
 	set -e;                                                            \
 	if [ -L include/asm ]; then                                        \
@@ -970,6 +971,10 @@ define check-symlink
 			echo "       set ARCH or save .config and run 'make mrproper' to fix it";             \
 			exit 1;                                            \
 		fi;                                                        \
+		test -e $$asmlink || rm include/asm;                       \
+	elif [ -d include/asm ]; then                                      \
+		echo "ERROR: $@ is a directory but a symlink was expected";\
+		exit 1;                                                    \
 	fi
 endef
 
@@ -1431,7 +1436,8 @@ ALLSOURCE_ARCHS := $(SRCARCH)
 define find-sources
         ( for arch in $(ALLSOURCE_ARCHS) ; do \
 	       find $(__srctree)arch/$${arch} $(RCS_FIND_IGNORE) \
-	            -name $1 -print; \
+		    -wholename $(__srctree)arch/$${arch}/include/asm -type d -prune \
+	            -o -name $1 -print; \
 	  done ; \
 	  find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
 	       -name $1 -print; \

arch/arm/Kconfig

@@ -16,8 +16,7 @@ config ARM
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_FTRACE if (!XIP_KERNEL)
-	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs

arch/arm/boot/compressed/Makefile

@@ -70,7 +70,7 @@ SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
 		 head.o misc.o $(OBJS)
 
-ifeq ($(CONFIG_FTRACE),y)
+ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif

arch/arm/common/sharpsl_pm.c

@@ -54,11 +54,13 @@
 /*
  * Prototypes
  */
+#ifdef CONFIG_PM
 static int sharpsl_off_charge_battery(void);
-static int sharpsl_check_battery_temp(void);
 static int sharpsl_check_battery_voltage(void);
-static int sharpsl_ac_check(void);
 static int sharpsl_fatal_check(void);
+#endif
+static int sharpsl_check_battery_temp(void);
+static int sharpsl_ac_check(void);
 static int sharpsl_average_value(int ad);
 static void sharpsl_average_clear(void);
 static void sharpsl_charge_toggle(struct work_struct *private_);
@@ -424,6 +426,7 @@ static int sharpsl_check_battery_temp(void)
 	return 0;
 }
 
+#ifdef CONFIG_PM
 static int sharpsl_check_battery_voltage(void)
 {
 	int val, i, buff[5];
@@ -455,6 +458,7 @@ static int sharpsl_check_battery_voltage(void)
 
 	return 0;
 }
+#endif
 
 static int sharpsl_ac_check(void)
 {
@@ -586,8 +590,6 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
 
 	return 0;
 }
-#endif
-
 
 /*
  * Check for fatal battery errors
@@ -738,7 +740,10 @@ static int sharpsl_off_charge_battery(void)
 		}
 	}
 }
-
+#else
+#define sharpsl_pm_suspend	NULL
+#define sharpsl_pm_resume	NULL
+#endif
 
 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -768,10 +773,12 @@ static void sharpsl_apm_get_power_status(struct apm_power_info *info)
 	info->battery_life = sharpsl_pm.battstat.mainbat_percent;
 }
 
+#ifdef CONFIG_PM
 static struct platform_suspend_ops sharpsl_pm_ops = {
 	.enter		= corgi_pxa_pm_enter,
 	.valid		= suspend_valid_only_mem,
 };
+#endif
 
 static int __init sharpsl_pm_probe(struct platform_device *pdev)
 {
@@ -802,7 +809,9 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
 
 	apm_get_power_status = sharpsl_apm_get_power_status;
 
+#ifdef CONFIG_PM
 	suspend_set_ops(&sharpsl_pm_ops);
+#endif
 
 	mod_timer(&sharpsl_pm.ac_timer, jiffies + msecs_to_jiffies(250));
 

arch/arm/include/asm/ftrace.h

@@ -1,7 +1,7 @@
 #ifndef _ASM_ARM_FTRACE
 #define _ASM_ARM_FTRACE
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 #define MCOUNT_ADDR		((long)(mcount))
 #define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
 

arch/arm/kernel/armksyms.c

@@ -183,6 +183,6 @@ EXPORT_SYMBOL(_find_next_bit_be);
 
 EXPORT_SYMBOL(copy_page);
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 EXPORT_SYMBOL(mcount);
 #endif

arch/arm/kernel/entry-common.S

@@ -101,7 +101,7 @@ ENDPROC(ret_from_fork)
 #undef CALL
 #define CALL(x) .long x
 
-#ifdef CONFIG_FTRACE
+#ifdef CONFIG_FUNCTION_TRACER
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
@@ -149,7 +149,7 @@ trace:
 ftrace_stub:
 	mov pc, lr
 
-#endif /* CONFIG_FTRACE */
+#endif /* CONFIG_FUNCTION_TRACER */
 
 /*=============================================================================
  * SWI handler

arch/arm/kernel/ftrace.c

@@ -95,19 +95,6 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ret;
 }
 
-int ftrace_mcount_set(unsigned long *data)
-{
-	unsigned long pc, old;
-	unsigned long *addr = data;
-	unsigned char *new;
-
-	pc = (unsigned long)&mcount_call;
-	memcpy(&old, &mcount_call, MCOUNT_INSN_SIZE);
-	new = ftrace_call_replace(pc, *addr);
-	*addr = ftrace_modify_code(pc, (unsigned char *)&old, new);
-	return 0;
-}
-
 /* run from kstop_machine */
 int __init ftrace_dyn_arch_init(void *data)
 {

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -165,6 +165,7 @@ static struct at91_mmc_data __initdata afeb9260_mmc_data = {
 static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("fm3130", 0x68),
+	}, {
 		I2C_BOARD_INFO("24c64", 0x50),
 	},
 };

arch/arm/mach-at91/include/mach/gpio.h

@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_AT91RM9200_GPIO_H
 #define __ASM_ARCH_AT91RM9200_GPIO_H
 
+#include <linux/kernel.h>
 #include <asm/irq.h>
 
 #define PIN_BASE		NR_AIC_IRQS
@@ -220,6 +221,7 @@ static inline int gpio_request(unsigned gpio, const char *label)
 
 static inline void gpio_free(unsigned gpio)
 {
+	might_sleep();
 }
 
 extern int gpio_direction_input(unsigned gpio);

arch/arm/mach-ep93xx/core.c

@@ -26,6 +26,7 @@
 #include <linux/serial_core.h>
 #include <linux/device.h>
 #include <linux/mm.h>
+#include <linux/dma-mapping.h>
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/delay.h>
@@ -449,12 +450,13 @@ static struct resource ep93xx_ohci_resources[] = {
 	},
 };
 
+
 static struct platform_device ep93xx_ohci_device = {
 	.name		= "ep93xx-ohci",
 	.id		= -1,
 	.dev		= {
-		.dma_mask		= (void *)0xffffffff,
-		.coherent_dma_mask	= 0xffffffff,
+		.dma_mask		= &ep93xx_ohci_device.dev.coherent_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 	.num_resources	= ARRAY_SIZE(ep93xx_ohci_resources),
 	.resource	= ep93xx_ohci_resources,

arch/arm/mach-imx/include/mach/gpio.h

@@ -1,5 +1,6 @@
 #ifndef _IMX_GPIO_H
 
+#include <linux/kernel.h>
 #include <mach/imx-regs.h>
 
 #define IMX_GPIO_ALLOC_MODE_NORMAL	0
@@ -63,6 +64,8 @@ static inline int gpio_request(unsigned gpio, const char *label)
 
 static inline void gpio_free(unsigned gpio)
 {
+	might_sleep();
+
 	imx_gpio_free(gpio);
 }
 

arch/arm/mach-ixp4xx/include/mach/gpio.h

@@ -25,6 +25,7 @@
 #ifndef __ASM_ARCH_IXP4XX_GPIO_H
 #define __ASM_ARCH_IXP4XX_GPIO_H
 
+#include <linux/kernel.h>
 #include <mach/hardware.h>
 
 static inline int gpio_request(unsigned gpio, const char *label)
@@ -34,6 +35,8 @@ static inline int gpio_request(unsigned gpio, const char *label)
 
 static inline void gpio_free(unsigned gpio)
 {
+	might_sleep();
+
 	return;
 }
 

arch/arm/mach-ks8695/include/mach/gpio.h

@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_GPIO_H_
 #define __ASM_ARCH_GPIO_H_
 
+#include <linux/kernel.h>
+
 #define KS8695_GPIO_0		0
 #define KS8695_GPIO_1		1
 #define KS8695_GPIO_2		2
@@ -74,6 +76,7 @@ static inline int gpio_request(unsigned int pin, const char *label)
 
 static inline void gpio_free(unsigned int pin)
 {
+	might_sleep();
 }
 
 #endif

arch/arm/mach-mx3/mx31ads.c

@@ -35,6 +35,8 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 
+#include "devices.h"
+
 /*!
  * @file mx31ads.c
  *

arch/arm/mach-mx3/pcm037.c

@@ -91,12 +91,12 @@ static struct map_desc pcm037_io_desc[] __initdata = {
 		.virtual	= AIPS1_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
 		.length		= AIPS1_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_DEVICE_NONSHARED
 	}, {
 		.virtual	= AIPS2_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
-		.type		= MT_DEVICE
+		.type		= MT_DEVICE_NONSHARED
 	},
 };
 

arch/arm/mach-ns9xxx/gpio.c

@@ -8,6 +8,7 @@
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
+#include <linux/kernel.h>
 #include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
@@ -63,6 +64,7 @@ EXPORT_SYMBOL(gpio_request);
 
 void gpio_free(unsigned gpio)
 {
+	might_sleep();
 	clear_bit(gpio, gpiores);
 	return;
 }

arch/arm/mach-orion5x/gpio.c

@@ -165,6 +165,8 @@ EXPORT_SYMBOL(gpio_request);
 
 void gpio_free(unsigned pin)
 {
+	might_sleep();
+
 	if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid)) {
 		pr_debug("%s: invalid GPIO %d\n", __func__, pin);
 		return;

arch/arm/mach-pxa/corgi_pm.c

@@ -204,7 +204,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.read_devdata    = corgipm_read_devdata,
 	.charger_wakeup  = corgi_charger_wakeup,
 	.should_wakeup   = corgi_should_wakeup,
-#ifdef CONFIG_BACKLIGHT_CORGI
+#if defined(CONFIG_LCD_CORGI)
+	.backlight_limit = corgi_lcd_limit_intensity,
+#elif defined(CONFIG_BACKLIGHT_CORGI)
 	.backlight_limit = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,

arch/arm/mach-pxa/include/mach/sharpsl.h

@@ -26,6 +26,7 @@ struct corgits_machinfo {
  * SharpSL Backlight
  */
 extern void corgibl_limit_intensity(int limit);
+extern void corgi_lcd_limit_intensity(int limit);
 
 
 /*

arch/arm/mach-pxa/spitz.c

@@ -385,6 +385,16 @@ static void __init spitz_init_spi(void)
 	if (err)
 		goto err_free_2;
 
+	err = gpio_direction_output(SPITZ_GPIO_ADS7846_CS, 1);
+	if (err)
+		goto err_free_3;
+	err = gpio_direction_output(SPITZ_GPIO_LCDCON_CS, 1);
+	if (err)
+		goto err_free_3;
+	err = gpio_direction_output(SPITZ_GPIO_MAX1111_CS, 1);
+	if (err)
+		goto err_free_3;
+
 	if (machine_is_akita()) {
 		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
 		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
@@ -394,6 +404,8 @@ static void __init spitz_init_spi(void)
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 	return;
 
+err_free_3:
+	gpio_free(SPITZ_GPIO_MAX1111_CS);
 err_free_2:
 	gpio_free(SPITZ_GPIO_LCDCON_CS);
 err_free_1:

arch/arm/mach-pxa/spitz_pm.c

@@ -198,7 +198,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.read_devdata     = spitzpm_read_devdata,
 	.charger_wakeup   = spitz_charger_wakeup,
 	.should_wakeup    = spitz_should_wakeup,
-#ifdef CONFIG_BACKLIGHT_CORGI
+#if defined(CONFIG_LCD_CORGI)
+	.backlight_limit = corgi_lcd_limit_intensity,
+#elif defined(CONFIG_BACKLIGHT_CORGI)
         .backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,

arch/arm/mm/proc-xsc3.S

@@ -349,7 +349,7 @@ ENTRY(cpu_xsc3_switch_mm)
 cpu_xsc3_mt_table:
 	.long	0x00						@ L_PTE_MT_UNCACHED
 	.long	PTE_EXT_TEX(1)					@ L_PTE_MT_BUFFERABLE
-	.long	PTE_CACHEABLE					@ L_PTE_MT_WRITETHROUGH
+	.long	PTE_EXT_TEX(5) | PTE_CACHEABLE			@ L_PTE_MT_WRITETHROUGH
 	.long	PTE_CACHEABLE | PTE_BUFFERABLE			@ L_PTE_MT_WRITEBACK
 	.long	PTE_EXT_TEX(1) | PTE_BUFFERABLE			@ L_PTE_MT_DEV_SHARED
 	.long	0x00						@ unused

arch/arm/plat-mxc/gpio.c

@@ -188,7 +188,7 @@ static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset)
 	struct mxc_gpio_port *port =
 		container_of(chip, struct mxc_gpio_port, chip);
 
-	return (__raw_readl(port->base + GPIO_DR) >> offset) & 1;
+	return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1;
 }
 
 static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset)

arch/arm/plat-mxc/include/mach/io.h

@@ -14,6 +14,26 @@
 /* Allow IO space to be anywhere in the memory */
 #define IO_SPACE_LIMIT 0xffffffff
 
+#ifdef CONFIG_ARCH_MX3
+#define __arch_ioremap __mx3_ioremap
+#define __arch_iounmap __iounmap
+
+static inline void __iomem *
+__mx3_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
+{
+	if (mtype == MT_DEVICE) {
+		/* Access all peripherals below 0x80000000 as nonshared device
+		 * but leave l2cc alone.
+		 */
+		if ((phys_addr < 0x80000000) && ((phys_addr < L2CC_BASE_ADDR) ||
+			(phys_addr >= L2CC_BASE_ADDR + L2CC_SIZE)))
+			mtype = MT_DEVICE_NONSHARED;
+	}
+
+	return __arm_ioremap(phys_addr, size, mtype);
+}
+#endif
+
 /* io address mapping macro */
 #define __io(a)			((void __iomem *)(a))
 

arch/ia64/include/asm/iommu.h

@@ -11,6 +11,5 @@ extern int force_iommu, no_iommu;
 extern int iommu_detected;
 extern void iommu_dma_init(void);
 extern void machvec_init(const char *name);
-extern int forbid_dac;
 
 #endif

arch/ia64/include/asm/kvm_host.h

@@ -365,7 +365,8 @@ struct kvm_vcpu_arch {
 	long itc_offset;
 	unsigned long itc_check;
 	unsigned long timer_check;
-	unsigned long timer_pending;
+	unsigned int timer_pending;
+	unsigned int timer_fired;
 
 	unsigned long vrr[8];
 	unsigned long ibr[8];
@@ -417,6 +418,9 @@ struct kvm_arch {
 	struct list_head assigned_dev_head;
 	struct dmar_domain *intel_iommu_domain;
 	struct hlist_head irq_ack_notifier_list;
+
+	unsigned long irq_sources_bitmap;
+	unsigned long irq_states[KVM_IOAPIC_NUM_PINS];
 };
 
 union cpuid3_t {

arch/ia64/kernel/pci-dma.c

@@ -89,13 +89,6 @@ int iommu_dma_supported(struct device *dev, u64 mask)
 {
 	struct dma_mapping_ops *ops = get_dma_ops(dev);
 
-#ifdef CONFIG_PCI
-	if (mask > 0xffffffff && forbid_dac > 0) {
-		dev_info(dev, "Disallowing DAC for device\n");
-		return 0;
-	}
-#endif
-
 	if (ops->dma_supported_op)
 		return ops->dma_supported_op(dev, mask);
 

arch/ia64/kvm/Makefile

@@ -29,13 +29,18 @@ define cmd_offsets
 	 echo ""; \
 	 echo "#endif" ) > $@
 endef
+
 # We use internal rules to avoid the "is up to date" message from make
-arch/ia64/kvm/asm-offsets.s: arch/ia64/kvm/asm-offsets.c
+arch/ia64/kvm/asm-offsets.s: arch/ia64/kvm/asm-offsets.c \
+			$(wildcard $(srctree)/arch/ia64/include/asm/*.h)\
+			$(wildcard $(srctree)/include/linux/*.h)
 	$(call if_changed_dep,cc_s_c)
 
 $(obj)/$(offsets-file): arch/ia64/kvm/asm-offsets.s
 	$(call cmd,offsets)
 
+FORCE : $(obj)/$(offsets-file)
+
 #
 # Makefile for Kernel-based Virtual Machine module
 #
@@ -53,7 +58,6 @@ endif
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
 
-FORCE : $(obj)/$(offsets-file)
 EXTRA_CFLAGS_vcpu.o += -mfixed-range=f2-f5,f12-f127
 kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
 	vtlb.o process.o

arch/ia64/kvm/kvm-ia64.c

@@ -385,6 +385,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	struct kvm *kvm = vcpu->kvm;
 	struct call_data call_data;
 	int i;
+
 	call_data.ptc_g_data = p->u.ptc_g_data;
 
 	for (i = 0; i < KVM_MAX_VCPUS; i++) {
@@ -418,33 +419,41 @@ int kvm_emulate_halt(struct kvm_vcpu *vcpu)
 	ktime_t kt;
 	long itc_diff;
 	unsigned long vcpu_now_itc;
-
 	unsigned long expires;
 	struct hrtimer *p_ht = &vcpu->arch.hlt_timer;
 	unsigned long cyc_per_usec = local_cpu_data->cyc_per_usec;
 	struct vpd *vpd = to_host(vcpu->kvm, vcpu->arch.vpd);
 
-	vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset;
+	if (irqchip_in_kernel(vcpu->kvm)) {
 
-	if (time_after(vcpu_now_itc, vpd->itm)) {
-		vcpu->arch.timer_check = 1;
-		return 1;
-	}
-	itc_diff = vpd->itm - vcpu_now_itc;
-	if (itc_diff < 0)
-		itc_diff = -itc_diff;
+		vcpu_now_itc = ia64_getreg(_IA64_REG_AR_ITC) + vcpu->arch.itc_offset;
 
-	expires = div64_u64(itc_diff, cyc_per_usec);
-	kt = ktime_set(0, 1000 * expires);
-	vcpu->arch.ht_active = 1;
-	hrtimer_start(p_ht, kt, HRTIMER_MODE_ABS);
+		if (time_after(vcpu_now_itc, vpd->itm)) {
+			vcpu->arch.timer_check = 1;
+			return 1;
+		}
+		itc_diff = vpd->itm - vcpu_now_itc;
+		if (itc_diff < 0)
+			itc_diff = -itc_diff;
+
+		expires = div64_u64(itc_diff, cyc_per_usec);
+		kt = ktime_set(0, 1000 * expires);
+
+		down_read(&vcpu->kvm->slots_lock);
+		vcpu->arch.ht_active = 1;
+		hrtimer_start(p_ht, kt, HRTIMER_MODE_ABS);
 
-	if (irqchip_in_kernel(vcpu->kvm)) {
 		vcpu->arch.mp_state = KVM_MP_STATE_HALTED;
 		kvm_vcpu_block(vcpu);
 		hrtimer_cancel(p_ht);
 		vcpu->arch.ht_active = 0;
 
+		if (test_and_clear_bit(KVM_REQ_UNHALT, &vcpu->requests))
+			if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED)
+				vcpu->arch.mp_state =
+					KVM_MP_STATE_RUNNABLE;
+		up_read(&vcpu->kvm->slots_lock);
+
 		if (vcpu->arch.mp_state != KVM_MP_STATE_RUNNABLE)
 			return -EINTR;
 		return 1;
@@ -484,10 +493,6 @@ static int (*kvm_vti_exit_handlers[])(struct kvm_vcpu *vcpu,
 static const int kvm_vti_max_exit_handlers =
 		sizeof(kvm_vti_exit_handlers)/sizeof(*kvm_vti_exit_handlers);
 
-static void kvm_prepare_guest_switch(struct kvm_vcpu *vcpu)
-{
-}
-
 static uint32_t kvm_get_exit_reason(struct kvm_vcpu *vcpu)
 {
 	struct exit_ctl_data *p_exit_data;
@@ -600,8 +605,6 @@ static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 again:
 	preempt_disable();
-
-	kvm_prepare_guest_switch(vcpu);
 	local_irq_disable();
 
 	if (signal_pending(current)) {
@@ -614,7 +617,7 @@ again:
 
 	vcpu->guest_mode = 1;
 	kvm_guest_enter();
-
+	down_read(&vcpu->kvm->slots_lock);
 	r = vti_vcpu_run(vcpu, kvm_run);
 	if (r < 0) {
 		local_irq_enable();
@@ -634,9 +637,8 @@ again:
 	 * But we need to prevent reordering, hence this barrier():
 	 */
 	barrier();
-
 	kvm_guest_exit();
-
+	up_read(&vcpu->kvm->slots_lock);
 	preempt_enable();
 
 	r = kvm_handle_exit(kvm_run, vcpu);
@@ -673,6 +675,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		kvm_vcpu_block(vcpu);
+		clear_bit(KVM_REQ_UNHALT, &vcpu->requests);
 		vcpu_put(vcpu);
 		return -EAGAIN;
 	}
@@ -778,6 +781,9 @@ static void kvm_init_vm(struct kvm *kvm)
 	kvm_build_io_pmt(kvm);
 
 	INIT_LIST_HEAD(&kvm->arch.assigned_dev_head);
+
+	/* Reserve bit 0 of irq_sources_bitmap for userspace irq source */
+	set_bit(KVM_USERSPACE_IRQ_SOURCE_ID, &kvm->arch.irq_sources_bitmap);
 }
 
 struct  kvm *kvm_arch_create_vm(void)
@@ -941,9 +947,8 @@ long kvm_arch_vm_ioctl(struct file *filp,
 			goto out;
 		if (irqchip_in_kernel(kvm)) {
 			mutex_lock(&kvm->lock);
-			kvm_ioapic_set_irq(kvm->arch.vioapic,
-						irq_event.irq,
-						irq_event.level);
+			kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID,
+				    irq_event.irq, irq_event.level);
 			mutex_unlock(&kvm->lock);
 			r = 0;
 		}
@@ -1123,15 +1128,16 @@ static enum hrtimer_restart hlt_timer_fn(struct hrtimer *data)
 	wait_queue_head_t *q;
 
 	vcpu  = container_of(data, struct kvm_vcpu, arch.hlt_timer);
+	q = &vcpu->wq;
+
 	if (vcpu->arch.mp_state != KVM_MP_STATE_HALTED)
 		goto out;
 
-	q = &vcpu->wq;
-	if (waitqueue_active(q)) {
-		vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+	if (waitqueue_active(q))
 		wake_up_interruptible(q);
-	}
+
 out:
+	vcpu->arch.timer_fired = 1;
 	vcpu->arch.timer_check = 1;
 	return HRTIMER_NORESTART;
 }
@@ -1700,12 +1706,14 @@ static void vcpu_kick_intr(void *info)
 void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 {
 	int ipi_pcpu = vcpu->cpu;
+	int cpu = get_cpu();
 
 	if (waitqueue_active(&vcpu->wq))
 		wake_up_interruptible(&vcpu->wq);
 
-	if (vcpu->guest_mode)
+	if (vcpu->guest_mode && cpu != ipi_pcpu)
 		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
+	put_cpu();
 }
 
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
@@ -1715,13 +1723,7 @@ int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
 
 	if (!test_and_set_bit(vec, &vpd->irr[0])) {
 		vcpu->arch.irq_new_pending = 1;
-		 if (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE)
-			kvm_vcpu_kick(vcpu);
-		else if (vcpu->arch.mp_state == KVM_MP_STATE_HALTED) {
-			vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-			if (waitqueue_active(&vcpu->wq))
-				wake_up_interruptible(&vcpu->wq);
-		}
+		kvm_vcpu_kick(vcpu);
 		return 1;
 	}
 	return 0;
@@ -1791,7 +1793,7 @@ int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 
 int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu)
 {
-	return 0;
+	return vcpu->arch.timer_fired;
 }
 
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)

arch/ia64/kvm/kvm_fw.c

@@ -286,6 +286,12 @@ static  u64 kvm_get_pal_call_index(struct kvm_vcpu *vcpu)
 	return index;
 }
 
+static void prepare_for_halt(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.timer_pending = 1;
+	vcpu->arch.timer_fired = 0;
+}
+
 int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 {
 
@@ -304,11 +310,10 @@ int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		break;
 	case PAL_HALT_LIGHT:
 	{
-		vcpu->arch.timer_pending = 1;
 		INIT_PAL_STATUS_SUCCESS(result);
+		prepare_for_halt(vcpu);
 		if (kvm_highest_pending_irq(vcpu) == -1)
 			ret = kvm_emulate_halt(vcpu);
-
 	}
 		break;
 

arch/ia64/kvm/process.c

@@ -713,7 +713,7 @@ void leave_hypervisor_tail(void)
 				if (!(VCPU(v, itv) & (1 << 16))) {
 					vcpu_pend_interrupt(v, VCPU(v, itv)
 							& 0xff);
-				VMX(v, itc_check) = 0;
+					VMX(v, itc_check) = 0;
 				} else {
 					v->arch.timer_pending = 1;
 				}

arch/mips/Kconfig

@@ -238,21 +238,8 @@ config MIPS_SIM
 	  This option enables support for MIPS Technologies MIPSsim software
 	  emulator.
 
-config MARKEINS
-	bool "NEC EMMA2RH Mark-eins"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select SWAP_IO_SPACE
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_HAS_CPU_R5000
-	help
-	  This enables support for the R5432-based NEC Mark-eins
-	  boards with R5500 CPU.
+config MACH_EMMA
+	bool "NEC EMMA series based machines"
 
 config MACH_VR41XX
 	bool "NEC VR4100 series based machines"
@@ -261,6 +248,19 @@ config MACH_VR41XX
 	select SYS_HAS_CPU_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
+config NXP_STB220
+	bool "NXP STB220 board"
+	select SOC_PNX833X
+	help
+	 Support for NXP Semiconductors STB220 Development Board.
+
+config NXP_STB225
+	bool "NXP 225 board"
+	select SOC_PNX833X
+	select SOC_PNX8335
+	help
+	 Support for NXP Semiconductors STB225 Development Board.
+
 config PNX8550_JBS
 	bool "NXP PNX8550 based JBS board"
 	select PNX8550
@@ -327,7 +327,6 @@ config SGI_IP22
 	select IP22_CPU_SCACHE
 	select IRQ_CPU
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
-	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
 	select SGI_HAS_HAL2
@@ -382,7 +381,6 @@ config SGI_IP28
 	select HW_HAS_EISA
 	select I8253
 	select I8259
-	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
 	select SGI_HAS_HAL2
@@ -601,6 +599,7 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/basler/excite/Kconfig"
+source "arch/mips/emma/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -849,6 +848,24 @@ config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
 
+config SOC_PNX833X
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select DMA_NONCOHERENT
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_GPIO
+	select CPU_MIPSR2_IRQ_VI
+
+config SOC_PNX8335
+	bool
+	select SOC_PNX833X
+
 config PNX8550
 	bool
 	select SOC_PNX8550
@@ -874,9 +891,6 @@ config EMMA2RH
 config SERIAL_RM9000
 	bool
 
-config SGI_HAS_DS1286
-	bool
-
 config SGI_HAS_INDYDOG
 	bool
 
@@ -1092,6 +1106,16 @@ config CPU_R5432
 	select CPU_SUPPORTS_32BIT_KERNEL
 	select CPU_SUPPORTS_64BIT_KERNEL
 
+config CPU_R5500
+	bool "R5500"
+	depends on SYS_HAS_CPU_R5500
+	select CPU_HAS_LLSC
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	help
+	  NEC VR5500 and VR5500A series processors implement 64-bit MIPS IV
+	  instruction set.
+
 config CPU_R6000
 	bool "R6000"
 	depends on EXPERIMENTAL
@@ -1202,6 +1226,9 @@ config SYS_HAS_CPU_R5000
 config SYS_HAS_CPU_R5432
 	bool
 
+config SYS_HAS_CPU_R5500
+	bool
+
 config SYS_HAS_CPU_R6000
 	bool
 

arch/mips/Makefile

@@ -131,6 +131,8 @@ cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
 cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \
 			-Wa,--trap
+cflags-$(CONFIG_CPU_R5500)	+= $(call cc-option,-march=r5500,-march=r5000) \
+			-Wa,--trap
 cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
@@ -381,6 +383,14 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 #
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
+# NXP STB225
+core-$(CONFIG_SOC_PNX833X)		+= arch/mips/nxp/pnx833x/common/
+cflags-$(CONFIG_SOC_PNX833X)	+= -Iarch/mips/include/asm/mach-pnx833x
+libs-$(CONFIG_NXP_STB220)		+= arch/mips/nxp/pnx833x/stb22x/
+load-$(CONFIG_NXP_STB220)		+= 0xffffffff80001000
+libs-$(CONFIG_NXP_STB225)		+= arch/mips/nxp/pnx833x/stb22x/
+load-$(CONFIG_NXP_STB225)		+= 0xffffffff80001000
+
 #
 # Common NXP PNX8550
 #
@@ -399,14 +409,17 @@ load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
 libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/nxp/pnx8550/stb810/
 load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 
-# NEC EMMA2RH boards
 #
-core-$(CONFIG_EMMA2RH)          += arch/mips/emma2rh/common/
-cflags-$(CONFIG_EMMA2RH)        += -I$(srctree)/arch/mips/include/asm/mach-emma2rh
+# Common NEC EMMAXXX
+#
+core-$(CONFIG_SOC_EMMA)		+= arch/mips/emma/common/
+cflags-$(CONFIG_SOC_EMMA2RH)	+= -I$(srctree)/arch/mips/include/asm/mach-emma2rh
 
+#
 # NEC EMMA2RH Mark-eins
-core-$(CONFIG_MARKEINS)         += arch/mips/emma2rh/markeins/
-load-$(CONFIG_MARKEINS)         += 0xffffffff88100000
+#
+core-$(CONFIG_NEC_MARKEINS)	+= arch/mips/emma/markeins/
+load-$(CONFIG_NEC_MARKEINS)	+= 0xffffffff88100000
 
 #
 # SGI IP22 (Indy/Indigo2)

arch/mips/alchemy/common/platform.c

@@ -17,6 +17,8 @@
 #include <linux/init.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
 
 #define PORT(_base, _irq)				\
 	{						\
@@ -163,24 +165,6 @@ static struct resource au1xxx_usb_gdt_resources[] = {
 	},
 };
 
-static struct resource au1xxx_mmc_resources[] = {
-	[0] = {
-		.start          = SD0_PHYS_ADDR,
-		.end            = SD0_PHYS_ADDR + 0x7ffff,
-		.flags          = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SD1_PHYS_ADDR,
-		.end 		= SD1_PHYS_ADDR + 0x7ffff,
-		.flags		= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start          = AU1200_SD_INT,
-		.end            = AU1200_SD_INT,
-		.flags          = IORESOURCE_IRQ,
-	}
-};
-
 static u64 udc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_gdt_device = {
@@ -249,16 +233,79 @@ static struct platform_device au1200_lcd_device = {
 
 static u64 au1xxx_mmc_dmamask =  DMA_32BIT_MASK;
 
-static struct platform_device au1xxx_mmc_device = {
+extern struct au1xmmc_platform_data au1xmmc_platdata[2];
+
+static struct resource au1200_mmc0_resources[] = {
+	[0] = {
+		.start          = SD0_PHYS_ADDR,
+		.end            = SD0_PHYS_ADDR + 0x7ffff,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_SD_INT,
+		.end		= AU1200_SD_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= DSCR_CMD0_SDMS_TX0,
+		.end		= DSCR_CMD0_SDMS_TX0,
+		.flags		= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start          = DSCR_CMD0_SDMS_RX0,
+		.end		= DSCR_CMD0_SDMS_RX0,
+		.flags          = IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device au1200_mmc0_device = {
 	.name = "au1xxx-mmc",
 	.id = 0,
 	.dev = {
-		.dma_mask               = &au1xxx_mmc_dmamask,
-		.coherent_dma_mask      = DMA_32BIT_MASK,
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &au1xmmc_platdata[0],
 	},
-	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
-	.resource       = au1xxx_mmc_resources,
+	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
+	.resource	= au1200_mmc0_resources,
 };
+
+#ifndef CONFIG_MIPS_DB1200
+static struct resource au1200_mmc1_resources[] = {
+	[0] = {
+		.start          = SD1_PHYS_ADDR,
+		.end            = SD1_PHYS_ADDR + 0x7ffff,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_SD_INT,
+		.end		= AU1200_SD_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start		= DSCR_CMD0_SDMS_TX1,
+		.end		= DSCR_CMD0_SDMS_TX1,
+		.flags		= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start          = DSCR_CMD0_SDMS_RX1,
+		.end		= DSCR_CMD0_SDMS_RX1,
+		.flags          = IORESOURCE_DMA,
+	}
+};
+
+static struct platform_device au1200_mmc1_device = {
+	.name = "au1xxx-mmc",
+	.id = 1,
+	.dev = {
+		.dma_mask		= &au1xxx_mmc_dmamask,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
+		.platform_data		= &au1xmmc_platdata[1],
+	},
+	.num_resources	= ARRAY_SIZE(au1200_mmc1_resources),
+	.resource	= au1200_mmc1_resources,
+};
+#endif /* #ifndef CONFIG_MIPS_DB1200 */
 #endif /* #ifdef CONFIG_SOC_AU1200 */
 
 static struct platform_device au1x00_pcmcia_device = {
@@ -296,7 +343,10 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_gdt_device,
 	&au1xxx_usb_otg_device,
 	&au1200_lcd_device,
-	&au1xxx_mmc_device,
+	&au1200_mmc0_device,
+#ifndef CONFIG_MIPS_DB1200
+	&au1200_mmc1_device,
+#endif
 #endif
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,

arch/mips/alchemy/pb1200/platform.c

@@ -20,9 +20,90 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/init.h>
+#include <linux/leds.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-au1x00/au1100_mmc.h>
+
+static int mmc_activity;
+
+static void pb1200mmc0_set_power(void *mmc_host, int state)
+{
+	if (state)
+		bcsr->board |= BCSR_BOARD_SD0PWR;
+	else
+		bcsr->board &= ~BCSR_BOARD_SD0PWR;
+
+	au_sync_delay(1);
+}
+
+static int pb1200mmc0_card_readonly(void *mmc_host)
+{
+	return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0;
+}
+
+static int pb1200mmc0_card_inserted(void *mmc_host)
+{
+	return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0;
+}
+
+static void pb1200_mmcled_set(struct led_classdev *led,
+			enum led_brightness brightness)
+{
+	if (brightness != LED_OFF) {
+		if (++mmc_activity == 1)
+			bcsr->disk_leds &= ~(1 << 8);
+	} else {
+		if (--mmc_activity == 0)
+			bcsr->disk_leds |= (1 << 8);
+	}
+}
+
+static struct led_classdev pb1200mmc_led = {
+	.brightness_set	= pb1200_mmcled_set,
+};
+
+#ifndef CONFIG_MIPS_DB1200
+static void pb1200mmc1_set_power(void *mmc_host, int state)
+{
+	if (state)
+		bcsr->board |= BCSR_BOARD_SD1PWR;
+	else
+		bcsr->board &= ~BCSR_BOARD_SD1PWR;
+
+	au_sync_delay(1);
+}
+
+static int pb1200mmc1_card_readonly(void *mmc_host)
+{
+	return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0;
+}
+
+static int pb1200mmc1_card_inserted(void *mmc_host)
+{
+	return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0;
+}
+#endif
+
+const struct au1xmmc_platform_data au1xmmc_platdata[2] = {
+	[0] = {
+		.set_power	= pb1200mmc0_set_power,
+		.card_inserted	= pb1200mmc0_card_inserted,
+		.card_readonly	= pb1200mmc0_card_readonly,
+		.cd_setup	= NULL,		/* use poll-timer in driver */
+		.led		= &pb1200mmc_led,
+	},
+#ifndef CONFIG_MIPS_DB1200
+	[1] = {
+		.set_power	= pb1200mmc1_set_power,
+		.card_inserted	= pb1200mmc1_card_inserted,
+		.card_readonly	= pb1200mmc1_card_readonly,
+		.cd_setup	= NULL,		/* use poll-timer in driver */
+		.led		= &pb1200mmc_led,
+	},
+#endif
+};
 
 static struct resource ide_resources[] = {
 	[0] = {

arch/mips/configs/ip22_defconfig

@@ -771,7 +771,6 @@ CONFIG_WATCHDOG=y
 CONFIG_INDYDOG=m
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-CONFIG_SGI_DS1286=m
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256

arch/mips/configs/ip27_defconfig

@@ -701,7 +701,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_RTC is not set
-CONFIG_SGI_IP27_RTC=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_DRM is not set

arch/mips/configs/ip28_defconfig

@@ -70,7 +70,6 @@ CONFIG_CPU_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_IRQ_CPU=y
 CONFIG_SWAP_IO_SPACE=y
-CONFIG_SGI_HAS_DS1286=y
 CONFIG_SGI_HAS_INDYDOG=y
 CONFIG_SGI_HAS_SEEQ=y
 CONFIG_SGI_HAS_WD93=y
@@ -585,7 +584,6 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_RTC is not set
-CONFIG_SGI_DS1286=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set

arch/mips/configs/pnx8335-stb225_defconfig

@@ -0,0 +1,1149 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Sat Jul 26 09:02:59 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+CONFIG_NXP_STB225=y
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SOC_PNX833X=y
+CONFIG_SOC_PNX8335=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+CONFIG_CPU_MIPS32_R2=y
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R2=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_MIPSR2_IRQ_VI=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_128=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=128
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=y
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x18000000
+CONFIG_MTD_PHYSMAP_LEN=0x04000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PNX8XXX=y
+CONFIG_SERIAL_PNX8XXX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=y
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
+# CONFIG_DVB_L64781 is not set
+CONFIG_DVB_TDA1004X=y
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_MIPS=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=m
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_KERNEL_TESTS is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_PRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/mips/emma/Kconfig

@@ -0,0 +1,29 @@
+choice
+	prompt "Machine type"
+	depends on MACH_EMMA
+	default NEC_MARKEINS
+
+config NEC_MARKEINS
+	bool "NEC EMMA2RH Mark-eins board"
+	select SOC_EMMA2RH
+	select HW_HAS_PCI
+	help
+	  This enables support for the NEC Electronics Mark-eins boards.
+
+endchoice
+
+config SOC_EMMA2RH
+	bool
+	select SOC_EMMA
+	select SYS_HAS_CPU_R5500
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config SOC_EMMA
+	bool
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select SWAP_IO_SPACE
+	select SYS_SUPPORTS_BIG_ENDIAN

arch/mips/emma2rh/common/Makefile → arch/mips/emma/common/Makefile

@@ -10,4 +10,4 @@
 #  (at your option) any later version.
 #
 
-obj-$(CONFIG_MARKEINS)	+= irq.o irq_emma2rh.o prom.o
+obj-$(CONFIG_NEC_MARKEINS)	+= prom.o

arch/mips/emma2rh/common/prom.c → arch/mips/emma/common/prom.c

@@ -29,11 +29,11 @@
 
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 const char *get_system_type(void)
 {
-#if defined(CONFIG_MARKEINS)
+#ifdef CONFIG_NEC_MARKEINS
 	return "NEC EMMA2RH Mark-eins";
 #else
 #error  Unknown NEC board
@@ -60,7 +60,7 @@ void __init prom_init(void)
 		strcat(arcs_cmdline, " ");
 	}
 
-#if defined(CONFIG_MARKEINS)
+#ifdef CONFIG_NEC_MARKEINS
 	add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
 #else
 #error  Unknown NEC board

arch/mips/emma2rh/markeins/Makefile → arch/mips/emma/markeins/Makefile

@@ -10,4 +10,4 @@
 #  (at your option) any later version.
 #
 
-obj-$(CONFIG_MARKEINS) += irq.o irq_markeins.o setup.o led.o platform.o
+obj-$(CONFIG_NEC_MARKEINS) += irq.o setup.o led.o platform.o

arch/mips/emma/markeins/irq.c

@@ -0,0 +1,331 @@
+/*
+ *  arch/mips/emma2rh/markeins/irq.c
+ *      This file defines the irq handler for EMMA2RH.
+ *
+ *  Copyright (C) NEC Electronics Corporation 2004-2006
+ *
+ *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
+ *
+ *	Copyright 2001 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/delay.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/system.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+
+#include <asm/emma/emma2rh.h>
+
+static void emma2rh_irq_enable(unsigned int irq)
+{
+	u32 reg_value;
+	u32 reg_bitmask;
+	u32 reg_index;
+
+	irq -= EMMA2RH_IRQ_BASE;
+
+	reg_index = EMMA2RH_BHIF_INT_EN_0 +
+		    (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
+	reg_value = emma2rh_in32(reg_index);
+	reg_bitmask = 0x1 << (irq % 32);
+	emma2rh_out32(reg_index, reg_value | reg_bitmask);
+}
+
+static void emma2rh_irq_disable(unsigned int irq)
+{
+	u32 reg_value;
+	u32 reg_bitmask;
+	u32 reg_index;
+
+	irq -= EMMA2RH_IRQ_BASE;
+
+	reg_index = EMMA2RH_BHIF_INT_EN_0 +
+		    (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0) * (irq / 32);
+	reg_value = emma2rh_in32(reg_index);
+	reg_bitmask = 0x1 << (irq % 32);
+	emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
+}
+
+struct irq_chip emma2rh_irq_controller = {
+	.name = "emma2rh_irq",
+	.ack = emma2rh_irq_disable,
+	.mask = emma2rh_irq_disable,
+	.mask_ack = emma2rh_irq_disable,
+	.unmask = emma2rh_irq_enable,
+};
+
+void emma2rh_irq_init(void)
+{
+	u32 i;
+
+	for (i = 0; i < NUM_EMMA2RH_IRQ; i++)
+		set_irq_chip_and_handler(EMMA2RH_IRQ_BASE + i,
+					 &emma2rh_irq_controller,
+					 handle_level_irq);
+}
+
+static void emma2rh_sw_irq_enable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_SW_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
+	reg |= 1 << irq;
+	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
+}
+
+static void emma2rh_sw_irq_disable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_SW_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
+	reg &= ~(1 << irq);
+	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
+}
+
+struct irq_chip emma2rh_sw_irq_controller = {
+	.name = "emma2rh_sw_irq",
+	.ack = emma2rh_sw_irq_disable,
+	.mask = emma2rh_sw_irq_disable,
+	.mask_ack = emma2rh_sw_irq_disable,
+	.unmask = emma2rh_sw_irq_enable,
+};
+
+void emma2rh_sw_irq_init(void)
+{
+	u32 i;
+
+	for (i = 0; i < NUM_EMMA2RH_IRQ_SW; i++)
+		set_irq_chip_and_handler(EMMA2RH_SW_IRQ_BASE + i,
+					 &emma2rh_sw_irq_controller,
+					 handle_level_irq);
+}
+
+static void emma2rh_gpio_irq_enable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_GPIO_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	reg |= 1 << irq;
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+}
+
+static void emma2rh_gpio_irq_disable(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_GPIO_IRQ_BASE;
+
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	reg &= ~(1 << irq);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+}
+
+static void emma2rh_gpio_irq_ack(unsigned int irq)
+{
+	u32 reg;
+
+	irq -= EMMA2RH_GPIO_IRQ_BASE;
+	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
+
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	reg &= ~(1 << irq);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+}
+
+static void emma2rh_gpio_irq_end(unsigned int irq)
+{
+	u32 reg;
+
+	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
+
+		irq -= EMMA2RH_GPIO_IRQ_BASE;
+
+		reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+		reg |= 1 << irq;
+		emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
+	}
+}
+
+struct irq_chip emma2rh_gpio_irq_controller = {
+	.name = "emma2rh_gpio_irq",
+	.ack = emma2rh_gpio_irq_ack,
+	.mask = emma2rh_gpio_irq_disable,
+	.mask_ack = emma2rh_gpio_irq_ack,
+	.unmask = emma2rh_gpio_irq_enable,
+	.end = emma2rh_gpio_irq_end,
+};
+
+void emma2rh_gpio_irq_init(void)
+{
+	u32 i;
+
+	for (i = 0; i < NUM_EMMA2RH_IRQ_GPIO; i++)
+		set_irq_chip(EMMA2RH_GPIO_IRQ_BASE + i,
+			     &emma2rh_gpio_irq_controller);
+}
+
+static struct irqaction irq_cascade = {
+	   .handler = no_action,
+	   .flags = 0,
+	   .mask = CPU_MASK_NONE,
+	   .name = "cascade",
+	   .dev_id = NULL,
+	   .next = NULL,
+};
+
+/*
+ * the first level int-handler will jump here if it is a emma2rh irq
+ */
+void emma2rh_irq_dispatch(void)
+{
+	u32 intStatus;
+	u32 bitmask;
+	u32 i;
+
+	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0) &
+		    emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
+
+#ifdef EMMA2RH_SW_CASCADE
+	if (intStatus &
+	    (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
+		u32 swIntStatus;
+		swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
+		    & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
+		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
+			if (swIntStatus & bitmask) {
+				do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
+				return;
+			}
+		}
+	}
+#endif
+
+	for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
+		if (intStatus & bitmask) {
+			do_IRQ(EMMA2RH_IRQ_BASE + i);
+			return;
+		}
+	}
+
+	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1) &
+		    emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
+
+#ifdef EMMA2RH_GPIO_CASCADE
+	if (intStatus &
+	    (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
+		u32 gpioIntStatus;
+		gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
+		    & emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
+			if (gpioIntStatus & bitmask) {
+				do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
+				return;
+			}
+		}
+	}
+#endif
+
+	for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
+		if (intStatus & bitmask) {
+			do_IRQ(EMMA2RH_IRQ_BASE + i);
+			return;
+		}
+	}
+
+	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2) &
+		    emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
+
+	for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
+		if (intStatus & bitmask) {
+			do_IRQ(EMMA2RH_IRQ_BASE + i);
+			return;
+		}
+	}
+}
+
+void __init arch_init_irq(void)
+{
+	u32 reg;
+
+	/* by default, interrupts are disabled. */
+	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
+	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
+	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
+
+	clear_c0_status(0xff00);
+	set_c0_status(0x0400);
+
+#define GPIO_PCI (0xf<<15)
+	/* setup GPIO interrupt for PCI interface */
+	/* direction input */
+	reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
+	emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
+	/* disable interrupt */
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
+	/* level triggerd */
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
+	emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
+	reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
+	emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
+	/* interrupt clear */
+	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
+
+	/* init all controllers */
+	emma2rh_irq_init();
+	emma2rh_sw_irq_init();
+	emma2rh_gpio_irq_init();
+	mips_cpu_irq_init();
+
+	/* setup cascade interrupts */
+	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
+	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
+	setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(CPU_IRQ_BASE + 7);
+	else if (pending & STATUSF_IP2)
+		emma2rh_irq_dispatch();
+	else if (pending & STATUSF_IP1)
+		do_IRQ(CPU_IRQ_BASE + 1);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(CPU_IRQ_BASE + 0);
+	else
+		spurious_interrupt();
+}

arch/mips/emma2rh/markeins/led.c → arch/mips/emma/markeins/led.c

@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/string.h>
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 const unsigned long clear = 0x20202020;
 

arch/mips/emma2rh/markeins/platform.c → arch/mips/emma/markeins/platform.c

@@ -36,7 +36,7 @@
 #include <asm/reboot.h>
 #include <asm/traps.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 
 #define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */

arch/mips/emma2rh/markeins/setup.c → arch/mips/emma/markeins/setup.c

@@ -29,7 +29,7 @@
 #include <asm/time.h>
 #include <asm/reboot.h>
 
-#include <asm/emma2rh/emma2rh.h>
+#include <asm/emma/emma2rh.h>
 
 #define	USE_CPU_COUNTER_TIMER	/* whether we use cpu counter */
 

arch/mips/emma2rh/common/irq.c

@@ -1,105 +0,0 @@
-/*
- *  arch/mips/emma2rh/common/irq.c
- *      This file is common irq dispatcher.
- *
- *  Copyright (C) NEC Electronics Corporation 2005-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/emma2rh/emma2rh.h>
-
-/*
- * the first level int-handler will jump here if it is a emma2rh irq
- */
-void emma2rh_irq_dispatch(void)
-{
-	u32 intStatus;
-	u32 bitmask;
-	u32 i;
-
-	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_0)
-	    & emma2rh_in32(EMMA2RH_BHIF_INT_EN_0);
-
-#ifdef EMMA2RH_SW_CASCADE
-	if (intStatus &
-	    (1 << ((EMMA2RH_SW_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
-		u32 swIntStatus;
-		swIntStatus = emma2rh_in32(EMMA2RH_BHIF_SW_INT)
-		    & emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
-		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
-			if (swIntStatus & bitmask) {
-				do_IRQ(EMMA2RH_SW_IRQ_BASE + i);
-				return;
-			}
-		}
-	}
-#endif
-
-	for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
-		if (intStatus & bitmask) {
-			do_IRQ(EMMA2RH_IRQ_BASE + i);
-			return;
-		}
-	}
-
-	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_1)
-	    & emma2rh_in32(EMMA2RH_BHIF_INT_EN_1);
-
-#ifdef EMMA2RH_GPIO_CASCADE
-	if (intStatus &
-	    (1 << ((EMMA2RH_GPIO_CASCADE - EMMA2RH_IRQ_INT0) & (32 - 1)))) {
-		u32 gpioIntStatus;
-		gpioIntStatus = emma2rh_in32(EMMA2RH_GPIO_INT_ST)
-		    & emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-		for (i = 0, bitmask = 1; i < 32; i++, bitmask <<= 1) {
-			if (gpioIntStatus & bitmask) {
-				do_IRQ(EMMA2RH_GPIO_IRQ_BASE + i);
-				return;
-			}
-		}
-	}
-#endif
-
-	for (i = 32, bitmask = 1; i < 64; i++, bitmask <<= 1) {
-		if (intStatus & bitmask) {
-			do_IRQ(EMMA2RH_IRQ_BASE + i);
-			return;
-		}
-	}
-
-	intStatus = emma2rh_in32(EMMA2RH_BHIF_INT_ST_2)
-	    & emma2rh_in32(EMMA2RH_BHIF_INT_EN_2);
-
-	for (i = 64, bitmask = 1; i < 96; i++, bitmask <<= 1) {
-		if (intStatus & bitmask) {
-			do_IRQ(EMMA2RH_IRQ_BASE + i);
-			return;
-		}
-	}
-}

arch/mips/emma2rh/common/irq_emma2rh.c

@@ -1,106 +0,0 @@
-/*
- *  arch/mips/emma2rh/common/irq_emma2rh.c
- *      This file defines the irq handler for EMMA2RH.
- *
- *  Copyright (C) NEC Electronics Corporation 2005-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * EMMA2RH defines 64 IRQs.
- *
- * This file exports one function:
- *	emma2rh_irq_init(u32 irq_base);
- */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/debug.h>
-
-#include <asm/emma2rh/emma2rh.h>
-
-/* number of total irqs supported by EMMA2RH */
-#define	NUM_EMMA2RH_IRQ		96
-
-static int emma2rh_irq_base = -1;
-
-void ll_emma2rh_irq_enable(int);
-void ll_emma2rh_irq_disable(int);
-
-static void emma2rh_irq_enable(unsigned int irq)
-{
-	ll_emma2rh_irq_enable(irq - emma2rh_irq_base);
-}
-
-static void emma2rh_irq_disable(unsigned int irq)
-{
-	ll_emma2rh_irq_disable(irq - emma2rh_irq_base);
-}
-
-struct irq_chip emma2rh_irq_controller = {
-	.name = "emma2rh_irq",
-	.ack = emma2rh_irq_disable,
-	.mask = emma2rh_irq_disable,
-	.mask_ack = emma2rh_irq_disable,
-	.unmask = emma2rh_irq_enable,
-};
-
-void emma2rh_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ; i++)
-		set_irq_chip_and_handler(i, &emma2rh_irq_controller,
-					 handle_level_irq);
-
-	emma2rh_irq_base = irq_base;
-}
-
-void ll_emma2rh_irq_enable(int emma2rh_irq)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	reg_index = EMMA2RH_BHIF_INT_EN_0
-	    + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
-	    * (emma2rh_irq / 32);
-	reg_value = emma2rh_in32(reg_index);
-	reg_bitmask = 0x1 << (emma2rh_irq % 32);
-	db_assert((reg_value & reg_bitmask) == 0);
-	emma2rh_out32(reg_index, reg_value | reg_bitmask);
-}
-
-void ll_emma2rh_irq_disable(int emma2rh_irq)
-{
-	u32 reg_value;
-	u32 reg_bitmask;
-	u32 reg_index;
-
-	reg_index = EMMA2RH_BHIF_INT_EN_0
-	    + (EMMA2RH_BHIF_INT_EN_1 - EMMA2RH_BHIF_INT_EN_0)
-	    * (emma2rh_irq / 32);
-	reg_value = emma2rh_in32(reg_index);
-	reg_bitmask = 0x1 << (emma2rh_irq % 32);
-	db_assert((reg_value & reg_bitmask) != 0);
-	emma2rh_out32(reg_index, reg_value & ~reg_bitmask);
-}

arch/mips/emma2rh/markeins/irq.c

@@ -1,132 +0,0 @@
-/*
- *  arch/mips/emma2rh/markeins/irq.c
- *      This file defines the irq handler for EMMA2RH.
- *
- *  Copyright (C) NEC Electronics Corporation 2004-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/delay.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/system.h>
-#include <asm/mipsregs.h>
-#include <asm/debug.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-
-#include <asm/emma2rh/emma2rh.h>
-
-/*
- * IRQ mapping
- *
- *  0-7: 8 CPU interrupts
- *	0 -	software interrupt 0
- *	1 - 	software interrupt 1
- *	2 - 	most Vrc5477 interrupts are routed to this pin
- *	3 - 	(optional) some other interrupts routed to this pin for debugg
- *	4 - 	not used
- *	5 - 	not used
- *	6 - 	not used
- *	7 - 	cpu timer (used by default)
- *
- */
-
-extern void emma2rh_sw_irq_init(u32 base);
-extern void emma2rh_gpio_irq_init(u32 base);
-extern void emma2rh_irq_init(u32 base);
-extern void emma2rh_irq_dispatch(void);
-
-static struct irqaction irq_cascade = {
-	   .handler = no_action,
-	   .flags = 0,
-	   .mask = CPU_MASK_NONE,
-	   .name = "cascade",
-	   .dev_id = NULL,
-	   .next = NULL,
-};
-
-void __init arch_init_irq(void)
-{
-	u32 reg;
-
-	db_run(printk("markeins_irq_setup invoked.\n"));
-
-	/* by default, interrupts are disabled. */
-	emma2rh_out32(EMMA2RH_BHIF_INT_EN_0, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT_EN_1, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT_EN_2, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_0, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_1, 0);
-	emma2rh_out32(EMMA2RH_BHIF_INT1_EN_2, 0);
-	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, 0);
-
-	clear_c0_status(0xff00);
-	set_c0_status(0x0400);
-
-#define GPIO_PCI (0xf<<15)
-	/* setup GPIO interrupt for PCI interface */
-	/* direction input */
-	reg = emma2rh_in32(EMMA2RH_GPIO_DIR);
-	emma2rh_out32(EMMA2RH_GPIO_DIR, reg & ~GPIO_PCI);
-	/* disable interrupt */
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg & ~GPIO_PCI);
-	/* level triggerd */
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MODE);
-	emma2rh_out32(EMMA2RH_GPIO_INT_MODE, reg | GPIO_PCI);
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_CND_A);
-	emma2rh_out32(EMMA2RH_GPIO_INT_CND_A, reg & (~GPIO_PCI));
-	/* interrupt clear */
-	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~GPIO_PCI);
-
-	/* init all controllers */
-	emma2rh_irq_init(EMMA2RH_IRQ_BASE);
-	emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
-	emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
-	mips_cpu_irq_init();
-
-	/* setup cascade interrupts */
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
-	setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_GPIO_CASCADE, &irq_cascade);
-	setup_irq(CPU_IRQ_BASE + CPU_EMMA2RH_CASCADE, &irq_cascade);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-        unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(CPU_IRQ_BASE + 7);
-	else if (pending & STATUSF_IP2)
-		emma2rh_irq_dispatch();
-	else if (pending & STATUSF_IP1)
-		do_IRQ(CPU_IRQ_BASE + 1);
-	else if (pending & STATUSF_IP0)
-		do_IRQ(CPU_IRQ_BASE + 0);
-	else
-		spurious_interrupt();
-}
-
-

arch/mips/emma2rh/markeins/irq_markeins.c

@@ -1,158 +0,0 @@
-/*
- *  arch/mips/emma2rh/markeins/irq_markeins.c
- *      This file defines the irq handler for Mark-eins.
- *
- *  Copyright (C) NEC Electronics Corporation 2004-2006
- *
- *  This file is based on the arch/mips/ddb5xxx/ddb5477/irq_5477.c
- *
- *	Copyright 2001 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-
-#include <asm/debug.h>
-#include <asm/emma2rh/emma2rh.h>
-
-static int emma2rh_sw_irq_base = -1;
-static int emma2rh_gpio_irq_base = -1;
-
-void ll_emma2rh_sw_irq_enable(int reg);
-void ll_emma2rh_sw_irq_disable(int reg);
-void ll_emma2rh_gpio_irq_enable(int reg);
-void ll_emma2rh_gpio_irq_disable(int reg);
-
-static void emma2rh_sw_irq_enable(unsigned int irq)
-{
-	ll_emma2rh_sw_irq_enable(irq - emma2rh_sw_irq_base);
-}
-
-static void emma2rh_sw_irq_disable(unsigned int irq)
-{
-	ll_emma2rh_sw_irq_disable(irq - emma2rh_sw_irq_base);
-}
-
-struct irq_chip emma2rh_sw_irq_controller = {
-	.name = "emma2rh_sw_irq",
-	.ack = emma2rh_sw_irq_disable,
-	.mask = emma2rh_sw_irq_disable,
-	.mask_ack = emma2rh_sw_irq_disable,
-	.unmask = emma2rh_sw_irq_enable,
-};
-
-void emma2rh_sw_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_SW; i++)
-		set_irq_chip_and_handler(i, &emma2rh_sw_irq_controller,
-					 handle_level_irq);
-
-	emma2rh_sw_irq_base = irq_base;
-}
-
-void ll_emma2rh_sw_irq_enable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_SW);
-
-	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
-	reg |= 1 << irq;
-	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
-}
-
-void ll_emma2rh_sw_irq_disable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < 32);
-
-	reg = emma2rh_in32(EMMA2RH_BHIF_SW_INT_EN);
-	reg &= ~(1 << irq);
-	emma2rh_out32(EMMA2RH_BHIF_SW_INT_EN, reg);
-}
-
-static void emma2rh_gpio_irq_enable(unsigned int irq)
-{
-	ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
-}
-
-static void emma2rh_gpio_irq_disable(unsigned int irq)
-{
-	ll_emma2rh_gpio_irq_disable(irq - emma2rh_gpio_irq_base);
-}
-
-static void emma2rh_gpio_irq_ack(unsigned int irq)
-{
-	irq -= emma2rh_gpio_irq_base;
-	emma2rh_out32(EMMA2RH_GPIO_INT_ST, ~(1 << irq));
-	ll_emma2rh_gpio_irq_disable(irq);
-}
-
-static void emma2rh_gpio_irq_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		ll_emma2rh_gpio_irq_enable(irq - emma2rh_gpio_irq_base);
-}
-
-struct irq_chip emma2rh_gpio_irq_controller = {
-	.name = "emma2rh_gpio_irq",
-	.ack = emma2rh_gpio_irq_ack,
-	.mask = emma2rh_gpio_irq_disable,
-	.mask_ack = emma2rh_gpio_irq_ack,
-	.unmask = emma2rh_gpio_irq_enable,
-	.end = emma2rh_gpio_irq_end,
-};
-
-void emma2rh_gpio_irq_init(u32 irq_base)
-{
-	u32 i;
-
-	for (i = irq_base; i < irq_base + NUM_EMMA2RH_IRQ_GPIO; i++)
-		set_irq_chip(i, &emma2rh_gpio_irq_controller);
-
-	emma2rh_gpio_irq_base = irq_base;
-}
-
-void ll_emma2rh_gpio_irq_enable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
-
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-	reg |= 1 << irq;
-	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}
-
-void ll_emma2rh_gpio_irq_disable(int irq)
-{
-	u32 reg;
-
-	db_assert(irq >= 0);
-	db_assert(irq < NUM_EMMA2RH_IRQ_GPIO);
-
-	reg = emma2rh_in32(EMMA2RH_GPIO_INT_MASK);
-	reg &= ~(1 << irq);
-	emma2rh_out32(EMMA2RH_GPIO_INT_MASK, reg);
-}

arch/mips/include/asm/bitops.h

@@ -558,39 +558,67 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *
 	__clear_bit(nr, addr);
 }
 
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-
 /*
  * Return the bit position (0..63) of the most significant 1 bit in a word
  * Returns -1 if no 1 bit exists
  */
-static inline unsigned long __fls(unsigned long x)
+static inline unsigned long __fls(unsigned long word)
 {
-	int lz;
+	int num;
 
-	if (sizeof(x) == 4) {
+	if (BITS_PER_LONG == 32 &&
+	    __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
 		__asm__(
 		"	.set	push					\n"
 		"	.set	mips32					\n"
 		"	clz	%0, %1					\n"
 		"	.set	pop					\n"
-		: "=r" (lz)
-		: "r" (x));
+		: "=r" (num)
+		: "r" (word));
 
-		return 31 - lz;
+		return 31 - num;
 	}
 
-	BUG_ON(sizeof(x) != 8);
+	if (BITS_PER_LONG == 64 &&
+	    __builtin_constant_p(cpu_has_mips64) && cpu_has_mips64) {
+		__asm__(
+		"	.set	push					\n"
+		"	.set	mips64					\n"
+		"	dclz	%0, %1					\n"
+		"	.set	pop					\n"
+		: "=r" (num)
+		: "r" (word));
 
-	__asm__(
-	"	.set	push						\n"
-	"	.set	mips64						\n"
-	"	dclz	%0, %1						\n"
-	"	.set	pop						\n"
-	: "=r" (lz)
-	: "r" (x));
+		return 63 - num;
+	}
+
+	num = BITS_PER_LONG - 1;
 
-	return 63 - lz;
+#if BITS_PER_LONG == 64
+	if (!(word & (~0ul << 32))) {
+		num -= 32;
+		word <<= 32;
+	}
+#endif
+	if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
+		num -= 16;
+		word <<= 16;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
+		num -= 8;
+		word <<= 8;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
+		num -= 4;
+		word <<= 4;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
+		num -= 2;
+		word <<= 2;
+	}
+	if (!(word & (~0ul << (BITS_PER_LONG-1))))
+		num -= 1;
+	return num;
 }
 
 /*
@@ -612,23 +640,43 @@ static inline unsigned long __ffs(unsigned long word)
  * This is defined the same way as ffs.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int fls(int word)
+static inline int fls(int x)
 {
-	__asm__("clz %0, %1" : "=r" (word) : "r" (word));
+	int r;
 
-	return 32 - word;
-}
+	if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+		__asm__("clz %0, %1" : "=r" (x) : "r" (x));
 
-#if defined(CONFIG_64BIT) && defined(CONFIG_CPU_MIPS64)
-static inline int fls64(__u64 word)
-{
-	__asm__("dclz %0, %1" : "=r" (word) : "r" (word));
+		return 32 - x;
+	}
 
-	return 64 - word;
+	r = 32;
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
 }
-#else
+
 #include <asm-generic/bitops/fls64.h>
-#endif
 
 /*
  * ffs - find first bit set.
@@ -646,16 +694,6 @@ static inline int ffs(int word)
 	return fls(word & -word);
 }
 
-#else
-
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/__fls.h>
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-
-#endif /*defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) */
-
 #include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/find.h>
 

arch/mips/include/asm/break.h

@@ -29,6 +29,7 @@
 #define _BRK_THREADBP	11	/* For threads, user bp (used by debuggers) */
 #define BRK_BUG		512	/* Used by BUG() */
 #define BRK_KDB		513	/* Used in KDB_ENTER() */
+#define BRK_MEMU	514	/* Used by FPU emulator */
 #define BRK_MULOVF	1023	/* Multiply overflow */
 
 #endif /* __ASM_BREAK_H */

arch/mips/include/asm/byteorder.h

@@ -11,11 +11,19 @@
 #include <linux/compiler.h>
 #include <asm/types.h>
 
-#ifdef __GNUC__
+#if defined(__MIPSEB__)
+# define __BIG_ENDIAN
+#elif defined(__MIPSEL__)
+# define __LITTLE_ENDIAN
+#else
+# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
+#endif
+
+#define __SWAB_64_THRU_32__
 
 #ifdef CONFIG_CPU_MIPSR2
 
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
 	__asm__(
 	"	wsbh	%0, %1			\n"
@@ -24,9 +32,9 @@ static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 x)
 
 	return x;
 }
-#define __arch__swab16(x)	___arch__swab16(x)
+#define __arch_swab16 __arch_swab16
 
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__asm__(
 	"	wsbh	%0, %1			\n"
@@ -36,11 +44,10 @@ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 x)
 
 	return x;
 }
-#define __arch__swab32(x)	___arch__swab32(x)
+#define __arch_swab32 __arch_swab32
 
 #ifdef CONFIG_CPU_MIPS64_R2
-
-static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
+static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
 {
 	__asm__(
 	"	dsbh	%0, %1			\n"
@@ -51,26 +58,11 @@ static __inline__ __attribute_const__ __u64 ___arch__swab64(__u64 x)
 
 	return x;
 }
-
-#define __arch__swab64(x)	___arch__swab64(x)
-
+#define __arch_swab64 __arch_swab64
 #endif /* CONFIG_CPU_MIPS64_R2 */
 
 #endif /* CONFIG_CPU_MIPSR2 */
 
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#if defined(__MIPSEB__)
-#  include <linux/byteorder/big_endian.h>
-#elif defined(__MIPSEL__)
-#  include <linux/byteorder/little_endian.h>
-#else
-#  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
-#endif
+#include <linux/byteorder.h>
 
 #endif /* _ASM_BYTEORDER_H */

arch/mips/include/asm/cpu-features.h

@@ -141,6 +141,8 @@
 #define cpu_has_mips64	(cpu_has_mips64r1 | cpu_has_mips64r2)
 #define cpu_has_mips_r1	(cpu_has_mips32r1 | cpu_has_mips64r1)
 #define cpu_has_mips_r2	(cpu_has_mips32r2 | cpu_has_mips64r2)
+#define cpu_has_mips_r	(cpu_has_mips32r1 | cpu_has_mips32r2 | \
+			 cpu_has_mips64r1 | cpu_has_mips64r2)
 
 #ifndef cpu_has_dsp
 #define cpu_has_dsp		(cpu_data[0].ases & MIPS_ASE_DSP)

arch/mips/include/asm/ds1286.h

@@ -1,15 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Machine dependent access functions for RTC registers.
- *
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef _ASM_DS1286_H
-#define _ASM_DS1286_H
-
-#include <ds1286.h>
-
-#endif /* _ASM_DS1286_H */

arch/mips/include/asm/emma2rh/emma2rh.h → arch/mips/include/asm/emma/emma2rh.h

@@ -1,5 +1,5 @@
 /*
- *  include/asm-mips/emma2rh/emma2rh.h
+ *  arch/mips/include/asm/emma/emma2rh.h
  *      This file is EMMA2RH common header.
  *
  *  Copyright (C) NEC Electronics Corporation 2005-2006
@@ -21,8 +21,8 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-#ifndef __ASM_EMMA2RH_EMMA2RH_H
-#define __ASM_EMMA2RH_EMMA2RH_H
+#ifndef __ASM_EMMA_EMMA2RH_H
+#define __ASM_EMMA_EMMA2RH_H
 
 #include <irq.h>
 
@@ -206,7 +206,6 @@ static inline void emma2rh_out32(u32 offset, u32 val)
 static inline u32 emma2rh_in32(u32 offset)
 {
 	u32 val = *(volatile u32 *)(EMMA2RH_BASE | offset);
-	emma2rh_sync();
 	return val;
 }
 
@@ -219,7 +218,6 @@ static inline void emma2rh_out16(u32 offset, u16 val)
 static inline u16 emma2rh_in16(u32 offset)
 {
 	u16 val = *(volatile u16 *)(EMMA2RH_BASE | offset);
-	emma2rh_sync();
 	return val;
 }
 
@@ -232,7 +230,6 @@ static inline void emma2rh_out8(u32 offset, u8 val)
 static inline u8 emma2rh_in8(u32 offset)
 {
 	u8 val = *(volatile u8 *)(EMMA2RH_BASE | offset);
-	emma2rh_sync();
 	return val;
 }
 
@@ -324,10 +321,10 @@ static inline u8 emma2rh_in8(u32 offset)
 /*
  * include the board dependent part
  */
-#if defined(CONFIG_MARKEINS)
-#include <asm/emma2rh/markeins.h>
+#ifdef CONFIG_NEC_MARKEINS
+#include <asm/emma/markeins.h>
 #else
 #error "Unknown EMMA2RH board!"
 #endif
 
-#endif /* __ASM_EMMA2RH_EMMA2RH_H */
+#endif /* __ASM_EMMA_EMMA2RH_H */

arch/mips/include/asm/fpu_emulator.h

@@ -23,6 +23,9 @@
 #ifndef _ASM_FPU_EMULATOR_H
 #define _ASM_FPU_EMULATOR_H
 
+#include <asm/break.h>
+#include <asm/inst.h>
+
 struct mips_fpu_emulator_stats {
 	unsigned int emulated;
 	unsigned int loads;
@@ -34,4 +37,18 @@ struct mips_fpu_emulator_stats {
 
 extern struct mips_fpu_emulator_stats fpuemustats;
 
+extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
+	unsigned long cpc);
+extern int do_dsemulret(struct pt_regs *xcp);
+
+/*
+ * Instruction inserted following the badinst to further tag the sequence
+ */
+#define BD_COOKIE 0x0000bd36	/* tne $0, $0 with baggage */
+
+/*
+ * Break instruction with special math emu break code set
+ */
+#define BREAK_MATH (0x0000000d | (BRK_MEMU << 16))
+
 #endif /* _ASM_FPU_EMULATOR_H */