|
|
@@ -1,248 +0,0 @@
|
|
|
-/*
|
|
|
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
|
|
|
- Philip Edelbrock <phil@netroedge.com>,
|
|
|
- Ralph Metzler <rjkm@thp.uni-koeln.de>, and
|
|
|
- Mark D. Studebaker <mdsxyz123@yahoo.com>
|
|
|
-
|
|
|
- Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
|
|
|
- Simon Vogl
|
|
|
-
|
|
|
- This program is free software; you can redistribute it and/or modify
|
|
|
- it under the terms of the GNU General Public License as published by
|
|
|
- the Free Software Foundation; either version 2 of the License, or
|
|
|
- (at your option) any later version.
|
|
|
-
|
|
|
- This program is distributed in the hope that it will be useful,
|
|
|
- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
- GNU General Public License for more details.
|
|
|
-
|
|
|
- You should have received a copy of the GNU General Public License
|
|
|
- along with this program; if not, write to the Free Software
|
|
|
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
-*/
|
|
|
-
|
|
|
-/* This interfaces to the I2C bus of the Voodoo3 to gain access to
|
|
|
- the BT869 and possibly other I2C devices. */
|
|
|
-
|
|
|
-#include <linux/kernel.h>
|
|
|
-#include <linux/module.h>
|
|
|
-#include <linux/init.h>
|
|
|
-#include <linux/pci.h>
|
|
|
-#include <linux/i2c.h>
|
|
|
-#include <linux/i2c-algo-bit.h>
|
|
|
-#include <asm/io.h>
|
|
|
-
|
|
|
-/* the only registers we use */
|
|
|
-#define REG 0x78
|
|
|
-#define REG2 0x70
|
|
|
-
|
|
|
-/* bit locations in the register */
|
|
|
-#define DDC_ENAB 0x00040000
|
|
|
-#define DDC_SCL_OUT 0x00080000
|
|
|
-#define DDC_SDA_OUT 0x00100000
|
|
|
-#define DDC_SCL_IN 0x00200000
|
|
|
-#define DDC_SDA_IN 0x00400000
|
|
|
-#define I2C_ENAB 0x00800000
|
|
|
-#define I2C_SCL_OUT 0x01000000
|
|
|
-#define I2C_SDA_OUT 0x02000000
|
|
|
-#define I2C_SCL_IN 0x04000000
|
|
|
-#define I2C_SDA_IN 0x08000000
|
|
|
-
|
|
|
-/* initialization states */
|
|
|
-#define INIT2 0x2
|
|
|
-#define INIT3 0x4
|
|
|
-
|
|
|
-/* delays */
|
|
|
-#define CYCLE_DELAY 10
|
|
|
-#define TIMEOUT (HZ / 2)
|
|
|
-
|
|
|
-
|
|
|
-static void __iomem *ioaddr;
|
|
|
-
|
|
|
-/* The voo GPIO registers don't have individual masks for each bit
|
|
|
- so we always have to read before writing. */
|
|
|
-
|
|
|
-static void bit_vooi2c_setscl(void *data, int val)
|
|
|
-{
|
|
|
- unsigned int r;
|
|
|
- r = readl(ioaddr + REG);
|
|
|
- if (val)
|
|
|
- r |= I2C_SCL_OUT;
|
|
|
- else
|
|
|
- r &= ~I2C_SCL_OUT;
|
|
|
- writel(r, ioaddr + REG);
|
|
|
- readl(ioaddr + REG); /* flush posted write */
|
|
|
-}
|
|
|
-
|
|
|
-static void bit_vooi2c_setsda(void *data, int val)
|
|
|
-{
|
|
|
- unsigned int r;
|
|
|
- r = readl(ioaddr + REG);
|
|
|
- if (val)
|
|
|
- r |= I2C_SDA_OUT;
|
|
|
- else
|
|
|
- r &= ~I2C_SDA_OUT;
|
|
|
- writel(r, ioaddr + REG);
|
|
|
- readl(ioaddr + REG); /* flush posted write */
|
|
|
-}
|
|
|
-
|
|
|
-/* The GPIO pins are open drain, so the pins always remain outputs.
|
|
|
- We rely on the i2c-algo-bit routines to set the pins high before
|
|
|
- reading the input from other chips. */
|
|
|
-
|
|
|
-static int bit_vooi2c_getscl(void *data)
|
|
|
-{
|
|
|
- return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
|
|
|
-}
|
|
|
-
|
|
|
-static int bit_vooi2c_getsda(void *data)
|
|
|
-{
|
|
|
- return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
|
|
|
-}
|
|
|
-
|
|
|
-static void bit_vooddc_setscl(void *data, int val)
|
|
|
-{
|
|
|
- unsigned int r;
|
|
|
- r = readl(ioaddr + REG);
|
|
|
- if (val)
|
|
|
- r |= DDC_SCL_OUT;
|
|
|
- else
|
|
|
- r &= ~DDC_SCL_OUT;
|
|
|
- writel(r, ioaddr + REG);
|
|
|
- readl(ioaddr + REG); /* flush posted write */
|
|
|
-}
|
|
|
-
|
|
|
-static void bit_vooddc_setsda(void *data, int val)
|
|
|
-{
|
|
|
- unsigned int r;
|
|
|
- r = readl(ioaddr + REG);
|
|
|
- if (val)
|
|
|
- r |= DDC_SDA_OUT;
|
|
|
- else
|
|
|
- r &= ~DDC_SDA_OUT;
|
|
|
- writel(r, ioaddr + REG);
|
|
|
- readl(ioaddr + REG); /* flush posted write */
|
|
|
-}
|
|
|
-
|
|
|
-static int bit_vooddc_getscl(void *data)
|
|
|
-{
|
|
|
- return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
|
|
|
-}
|
|
|
-
|
|
|
-static int bit_vooddc_getsda(void *data)
|
|
|
-{
|
|
|
- return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
|
|
|
-}
|
|
|
-
|
|
|
-static int config_v3(struct pci_dev *dev)
|
|
|
-{
|
|
|
- unsigned long cadr;
|
|
|
-
|
|
|
- /* map Voodoo3 memory */
|
|
|
- cadr = dev->resource[0].start;
|
|
|
- cadr &= PCI_BASE_ADDRESS_MEM_MASK;
|
|
|
- ioaddr = ioremap_nocache(cadr, 0x1000);
|
|
|
- if (ioaddr) {
|
|
|
- writel(0x8160, ioaddr + REG2);
|
|
|
- writel(0xcffc0020, ioaddr + REG);
|
|
|
- dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
|
|
|
- return 0;
|
|
|
- }
|
|
|
- return -ENODEV;
|
|
|
-}
|
|
|
-
|
|
|
-static struct i2c_algo_bit_data voo_i2c_bit_data = {
|
|
|
- .setsda = bit_vooi2c_setsda,
|
|
|
- .setscl = bit_vooi2c_setscl,
|
|
|
- .getsda = bit_vooi2c_getsda,
|
|
|
- .getscl = bit_vooi2c_getscl,
|
|
|
- .udelay = CYCLE_DELAY,
|
|
|
- .timeout = TIMEOUT
|
|
|
-};
|
|
|
-
|
|
|
-static struct i2c_adapter voodoo3_i2c_adapter = {
|
|
|
- .owner = THIS_MODULE,
|
|
|
- .name = "I2C Voodoo3/Banshee adapter",
|
|
|
- .algo_data = &voo_i2c_bit_data,
|
|
|
-};
|
|
|
-
|
|
|
-static struct i2c_algo_bit_data voo_ddc_bit_data = {
|
|
|
- .setsda = bit_vooddc_setsda,
|
|
|
- .setscl = bit_vooddc_setscl,
|
|
|
- .getsda = bit_vooddc_getsda,
|
|
|
- .getscl = bit_vooddc_getscl,
|
|
|
- .udelay = CYCLE_DELAY,
|
|
|
- .timeout = TIMEOUT
|
|
|
-};
|
|
|
-
|
|
|
-static struct i2c_adapter voodoo3_ddc_adapter = {
|
|
|
- .owner = THIS_MODULE,
|
|
|
- .class = I2C_CLASS_DDC,
|
|
|
- .name = "DDC Voodoo3/Banshee adapter",
|
|
|
- .algo_data = &voo_ddc_bit_data,
|
|
|
-};
|
|
|
-
|
|
|
-static struct pci_device_id voodoo3_ids[] __devinitdata = {
|
|
|
- { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
|
|
|
- { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
|
|
|
- { 0, }
|
|
|
-};
|
|
|
-
|
|
|
-MODULE_DEVICE_TABLE (pci, voodoo3_ids);
|
|
|
-
|
|
|
-static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
|
-{
|
|
|
- int retval;
|
|
|
-
|
|
|
- retval = config_v3(dev);
|
|
|
- if (retval)
|
|
|
- return retval;
|
|
|
-
|
|
|
- /* set up the sysfs linkage to our parent device */
|
|
|
- voodoo3_i2c_adapter.dev.parent = &dev->dev;
|
|
|
- voodoo3_ddc_adapter.dev.parent = &dev->dev;
|
|
|
-
|
|
|
- retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
|
|
|
- if (retval)
|
|
|
- return retval;
|
|
|
- retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
|
|
|
- if (retval)
|
|
|
- i2c_del_adapter(&voodoo3_i2c_adapter);
|
|
|
- return retval;
|
|
|
-}
|
|
|
-
|
|
|
-static void __devexit voodoo3_remove(struct pci_dev *dev)
|
|
|
-{
|
|
|
- i2c_del_adapter(&voodoo3_i2c_adapter);
|
|
|
- i2c_del_adapter(&voodoo3_ddc_adapter);
|
|
|
- iounmap(ioaddr);
|
|
|
-}
|
|
|
-
|
|
|
-static struct pci_driver voodoo3_driver = {
|
|
|
- .name = "voodoo3_smbus",
|
|
|
- .id_table = voodoo3_ids,
|
|
|
- .probe = voodoo3_probe,
|
|
|
- .remove = __devexit_p(voodoo3_remove),
|
|
|
-};
|
|
|
-
|
|
|
-static int __init i2c_voodoo3_init(void)
|
|
|
-{
|
|
|
- return pci_register_driver(&voodoo3_driver);
|
|
|
-}
|
|
|
-
|
|
|
-static void __exit i2c_voodoo3_exit(void)
|
|
|
-{
|
|
|
- pci_unregister_driver(&voodoo3_driver);
|
|
|
-}
|
|
|
-
|
|
|
-
|
|
|
-MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
|
|
|
- "Philip Edelbrock <phil@netroedge.com>, "
|
|
|
- "Ralph Metzler <rjkm@thp.uni-koeln.de>, "
|
|
|
- "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
|
|
|
-MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
|
|
|
-MODULE_LICENSE("GPL");
|
|
|
-
|
|
|
-module_init(i2c_voodoo3_init);
|
|
|
-module_exit(i2c_voodoo3_exit);
|
Jean Delvare