[ARM] pxa: remove the now unused IMPMCR/IMPMSR register definitions

There two are internal registers that are used to control the power
management of the Internal Memory (i.e. Internal SRAM). They are
referenced nowhere and removed here to simplify pxa-regs.h a bit.

Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/mach-pxa/include/mach/pxa-regs.h

@@ -553,60 +553,6 @@
  * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
  */
 
-#ifdef CONFIG_PXA27x
-
-#define SRAM_SIZE		0x40000 /* 4x64K  */
-
-#define SRAM_MEM_PHYS		0x5C000000
-
-#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
-#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
-
-#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
-#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
-#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
-#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
-
-#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
-#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
-#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
-#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
-
-#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
-#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
-#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
-#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
-
-#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
-#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
-#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
-#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
-
-#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
-#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
-#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
-#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
-
-#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
-
-#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
-#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
-#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
-
-#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
-#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
-#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
-
-#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
-#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
-#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
-
-#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
-#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
-#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
-
-#endif
-
 /* PWRMODE register M field values */
 
 #define PWRMODE_IDLE		0x1