sparc32: More memory probing consolidation.

The PROM library function prom_meminit() builds a table,
prom_phys_avail[], just so that probe_memory() in
arch/sparc/mm/fault.c can copy it into sp_banks[].

Just have prom_meminit() fill in the sp_banks[] array directly, and
remove duplicated sort() function.

Signed-off-by: David S. Miller <davem@davemloft.net>

arch/sparc/kernel/setup.c

@@ -180,11 +180,9 @@ static void __init boot_flags_init(char *commands)
 
 /* This routine will in the future do all the nasty prom stuff
  * to probe for the mmu type and its parameters, etc. This will
- * also be where SMP things happen plus the Sparc specific memory
- * physical memory probe as on the alpha.
+ * also be where SMP things happen.
  */
 
-extern int prom_probe_memory(void);
 extern void sun4c_probe_vac(void);
 extern char cputypval;
 extern unsigned long start, end;
@@ -268,7 +266,6 @@ void __init setup_arch(char **cmdline_p)
 	if (ARCH_SUN4C_SUN4)
 		sun4c_probe_vac();
 	load_mmu();
-	(void) prom_probe_memory();
 
 	phys_base = 0xffffffffUL;
 	highest_paddr = 0UL;

arch/sparc/mm/fault.c

@@ -47,64 +47,15 @@ int vac_size, vac_linesize, vac_do_hw_vac_flushes;
 int vac_entries_per_context, vac_entries_per_segment;
 int vac_entries_per_page;
 
-/* Nice, simple, prom library does all the sweating for us. ;) */
-int prom_probe_memory (void)
+/* Return how much physical memory we have.  */
+unsigned long probe_memory(void)
 {
-	register struct linux_mlist_v0 *mlist;
-	register unsigned long bytes, base_paddr, tally;
-	register int i;
-
-	i = 0;
-	mlist= prom_meminfo();
-	bytes = tally = mlist->num_bytes;
-	base_paddr = (unsigned long) mlist->start_adr;
-  
-	sp_banks[0].base_addr = base_paddr;
-	sp_banks[0].num_bytes = bytes;
-
-	while (mlist->theres_more != (void *) 0){
-		i++;
-		mlist = mlist->theres_more;
-		bytes = mlist->num_bytes;
-		tally += bytes;
-		if (i > SPARC_PHYS_BANKS-1) {
-			printk ("The machine has more banks than "
-				"this kernel can support\n"
-				"Increase the SPARC_PHYS_BANKS "
-				"setting (currently %d)\n",
-				SPARC_PHYS_BANKS);
-			i = SPARC_PHYS_BANKS-1;
-			break;
-		}
-    
-		sp_banks[i].base_addr = (unsigned long) mlist->start_adr;
-		sp_banks[i].num_bytes = mlist->num_bytes;
-	}
-
-	i++;
-	sp_banks[i].base_addr = 0xdeadbeef;
-	sp_banks[i].num_bytes = 0;
-
-	/* Now mask all bank sizes on a page boundary, it is all we can
-	 * use anyways.
-	 */
-	for(i=0; sp_banks[i].num_bytes != 0; i++)
-		sp_banks[i].num_bytes &= PAGE_MASK;
-
-	return tally;
-}
-
-/* Traverse the memory lists in the prom to see how much physical we
- * have.
- */
-unsigned long
-probe_memory(void)
-{
-	int total;
+	unsigned long total = 0;
+	int i;
 
-	total = prom_probe_memory();
+	for (i = 0; sp_banks[i].num_bytes; i++)
+		total += sp_banks[i].num_bytes;
 
-	/* Oh man, much nicer, keep the dirt in promlib. */
 	return total;
 }
 

arch/sparc/prom/memory.c

@@ -1,120 +1,100 @@
 /* memory.c: Prom routine for acquiring various bits of information
  *           about RAM on the machine, both virtual and physical.
  *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997 Michael A. Griffith (grif@acm.org)
  */
 
 #include <linux/kernel.h>
+#include <linux/sort.h>
 #include <linux/init.h>
 
 #include <asm/openprom.h>
 #include <asm/sun4prom.h>
 #include <asm/oplib.h>
+#include <asm/page.h>
 
-/* This routine, for consistency, returns the ram parameters in the
- * V0 prom memory descriptor format.  I choose this format because I
- * think it was the easiest to work with.  I feel the religious
- * arguments now... ;)  Also, I return the linked lists sorted to
- * prevent paging_init() upset stomach as I have not yet written
- * the pepto-bismol kernel module yet.
- */
+static int __init prom_meminit_v0(void)
+{
+	struct linux_mlist_v0 *p;
+	int index;
 
-struct linux_prom_registers prom_reg_memlist[64];
+	index = 0;
+	for (p = *(romvec->pv_v0mem.v0_available); p; p = p->theres_more) {
+		sp_banks[index].base_addr = (unsigned long) p->start_adr;
+		sp_banks[index].num_bytes = p->num_bytes;
+		index++;
+	}
 
-struct linux_mlist_v0 prom_phys_avail[64];
+	return index;
+}
 
-/* Internal Prom library routine to sort a linux_mlist_v0 memory
- * list.  Used below in initialization.
- */
-static void __init
-prom_sortmemlist(struct linux_mlist_v0 *thislist)
+static int __init prom_meminit_v2(void)
 {
-	int swapi = 0;
-	int i, mitr, tmpsize;
-	char *tmpaddr;
-	char *lowest;
-
-	for(i=0; thislist[i].theres_more; i++) {
-		lowest = thislist[i].start_adr;
-		for(mitr = i+1; thislist[mitr-1].theres_more; mitr++)
-			if(thislist[mitr].start_adr < lowest) {
-				lowest = thislist[mitr].start_adr;
-				swapi = mitr;
-			}
-		if(lowest == thislist[i].start_adr) continue;
-		tmpaddr = thislist[swapi].start_adr;
-		tmpsize = thislist[swapi].num_bytes;
-		for(mitr = swapi; mitr > i; mitr--) {
-			thislist[mitr].start_adr = thislist[mitr-1].start_adr;
-			thislist[mitr].num_bytes = thislist[mitr-1].num_bytes;
-		}
-		thislist[i].start_adr = tmpaddr;
-		thislist[i].num_bytes = tmpsize;
+	struct linux_prom_registers reg[64];
+	int node, size, num_ents, i;
+
+	node = prom_searchsiblings(prom_getchild(prom_root_node), "memory");
+	size = prom_getproperty(node, "available", (char *) reg, sizeof(reg));
+	num_ents = size / sizeof(struct linux_prom_registers);
+
+	for (i = 0; i < num_ents; i++) {
+		sp_banks[i].base_addr = reg[i].phys_addr;
+		sp_banks[i].num_bytes = reg[i].reg_size;
 	}
 
-	return;
+	return num_ents;
+}
+
+static int __init prom_meminit_sun4(void)
+{
+#ifdef CONFIG_SUN4
+	sp_banks[0].base_addr = 0;
+	sp_banks[0].num_bytes = *(sun4_romvec->memoryavail);
+#endif
+	return 1;
+}
+
+static int sp_banks_cmp(const void *a, const void *b)
+{
+	const struct sparc_phys_banks *x = a, *y = b;
+
+	if (x->base_addr > y->base_addr)
+		return 1;
+	if (x->base_addr < y->base_addr)
+		return -1;
+	return 0;
 }
 
 /* Initialize the memory lists based upon the prom version. */
 void __init prom_meminit(void)
 {
-	int node = 0;
-	unsigned int iter, num_regs;
-	struct linux_mlist_v0 *mptr;  /* ptr for traversal */
+	int i, num_ents = 0;
 
-	switch(prom_vers) {
+	switch (prom_vers) {
 	case PROM_V0:
-		/* Nice, kind of easier to do in this case. */
-		for(mptr = (*(romvec->pv_v0mem.v0_available)), iter=0;
-		    mptr; mptr=mptr->theres_more, iter++) {
-			prom_phys_avail[iter].start_adr = mptr->start_adr;
-			prom_phys_avail[iter].num_bytes = mptr->num_bytes;
-			prom_phys_avail[iter].theres_more = &prom_phys_avail[iter+1];
-		}
-		prom_phys_avail[iter-1].theres_more = NULL;
-		prom_sortmemlist(prom_phys_avail);
+		num_ents = prom_meminit_v0();
 		break;
+
 	case PROM_V2:
 	case PROM_V3:
-		/* Grrr, have to traverse the prom device tree ;( */
-		node = prom_getchild(prom_root_node);
-		node = prom_searchsiblings(node, "memory");
-		num_regs = prom_getproperty(node, "available",
-					    (char *) prom_reg_memlist,
-					    sizeof(prom_reg_memlist));
-		num_regs = (num_regs/sizeof(struct linux_prom_registers));
-		for(iter=0; iter<num_regs; iter++) {
-			prom_phys_avail[iter].start_adr =
-				(char *) prom_reg_memlist[iter].phys_addr;
-			prom_phys_avail[iter].num_bytes =
-				(unsigned long) prom_reg_memlist[iter].reg_size;
-			prom_phys_avail[iter].theres_more =
-				&prom_phys_avail[iter+1];
-		}
-		prom_phys_avail[iter-1].theres_more = NULL;
-		prom_sortmemlist(prom_phys_avail);
+		num_ents = prom_meminit_v2();
 		break;
 
 	case PROM_SUN4:
-#ifdef CONFIG_SUN4	
-		/* how simple :) */
-		prom_phys_avail[0].start_adr = NULL;
-		prom_phys_avail[0].num_bytes = *(sun4_romvec->memoryavail);
-		prom_phys_avail[0].theres_more = NULL;
-#endif
+		num_ents = prom_meminit_sun4();
 		break;
 
 	default:
 		break;
-	};
-}
+	}
+	sort(sp_banks, num_ents, sizeof(struct sparc_phys_banks),
+	     sp_banks_cmp, NULL);
 
-/* This returns a pointer to our libraries internal v0 format
- * available memory list.
- */
-struct linux_mlist_v0 *
-prom_meminfo(void)
-{
-	return prom_phys_avail;
+	/* Sentinel.  */
+	sp_banks[num_ents].base_addr = 0xdeadbeef;
+	sp_banks[num_ents].num_bytes = 0;
+
+	for (i = 0; i < num_ents; i++)
+		sp_banks[i].num_bytes &= PAGE_MASK;
 }

include/asm-sparc/oplib.h

@@ -84,13 +84,6 @@ extern int prom_devclose(int device_handle);
 extern void prom_seek(int device_handle, unsigned int seek_hival,
 		      unsigned int seek_lowval);
 
-/* Machine memory configuration routine. */
-
-/* This function returns a V0 format available memory descriptor entry.
- * This list is pre-sorted,
- */
-extern struct linux_mlist_v0 *prom_meminfo(void);
-
 /* Miscellaneous routines, don't really fit in any category per se. */
 
 /* Reboot the machine with the command line passed. */

include/asm-sparc/page.h

@@ -38,12 +38,11 @@
 
 /* The following structure is used to hold the physical
  * memory configuration of the machine.  This is filled in
- * probe_memory() and is later used by mem_init() to set up
- * mem_map[].  We statically allocate SPARC_PHYS_BANKS of
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
  * these structs, this is arbitrary.  The entry after the
  * last valid one has num_bytes==0.
  */
-
 struct sparc_phys_banks {
   unsigned long base_addr;
   unsigned long num_bytes;