[SCSI] qla2xxx: T10 DIF - ISP83xx changes.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/qla2xxx/qla_attr.c

@@ -1812,7 +1812,7 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 
 	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
-			int prot = 0;
+			int prot = 0, guard;
 			vha->flags.difdix_supported = 1;
 			ql_dbg(ql_dbg_user, vha, 0x7082,
 			    "Registered for DIF/DIX type 1 and 3 protection.\n");
@@ -1825,7 +1825,14 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable)
 			    | SHOST_DIX_TYPE1_PROTECTION
 			    | SHOST_DIX_TYPE2_PROTECTION
 			    | SHOST_DIX_TYPE3_PROTECTION);
-			scsi_host_set_guard(vha->host, SHOST_DIX_GUARD_CRC);
+
+			guard = SHOST_DIX_GUARD_CRC;
+
+			if (IS_PI_IPGUARD_CAPABLE(ha) &&
+			    (ql2xenabledif > 1 || IS_PI_DIFB_DIX0_CAPABLE(ha)))
+				guard |= SHOST_DIX_GUARD_IP;
+
+			scsi_host_set_guard(vha->host, guard);
 		} else
 			vha->flags.difdix_supported = 0;
 	}

drivers/scsi/qla2xxx/qla_dbg.c

@@ -17,7 +17,8 @@
  * |                              |                    | 0x113a         |
  * | Device Discovery             |       0x2087       | 0x2020-0x2022, |
  * |                              |                    | 0x2016         |
- * | Queue Command and IO tracing |       0x3030       | 0x3006,0x3008  |
+ * | Queue Command and IO tracing |       0x3030       | 0x3006-0x300b  |
+ * |                              |                    | 0x3027-0x3028  |
  * |                              |                    | 0x302d-0x302e  |
  * | DPC Thread                   |       0x401d       | 0x4002,0x4013  |
  * | Async Events                 |       0x5071       | 0x502b-0x502f  |

drivers/scsi/qla2xxx/qla_def.h

@@ -1468,9 +1468,10 @@ typedef struct {
 } cont_a64_entry_t;
 
 #define PO_MODE_DIF_INSERT	0
-#define PO_MODE_DIF_REMOVE	BIT_0
-#define PO_MODE_DIF_PASS	BIT_1
-#define PO_MODE_DIF_REPLACE	(BIT_0 + BIT_1)
+#define PO_MODE_DIF_REMOVE	1
+#define PO_MODE_DIF_PASS	2
+#define PO_MODE_DIF_REPLACE	3
+#define PO_MODE_DIF_TCP_CKSUM	6
 #define PO_ENABLE_DIF_BUNDLING	BIT_8
 #define PO_ENABLE_INCR_GUARD_SEED	BIT_3
 #define PO_DISABLE_INCR_REF_TAG	BIT_5
@@ -2781,6 +2782,12 @@ struct qla_hw_data {
 /* Bit 21 of fw_attributes decides the MCTP capabilities */
 #define IS_MCTP_CAPABLE(ha)	(IS_QLA2031(ha) && \
 				((ha)->fw_attributes_ext[0] & BIT_0))
+#define IS_PI_UNINIT_CAPABLE(ha)	(IS_QLA83XX(ha))
+#define IS_PI_IPGUARD_CAPABLE(ha)	(IS_QLA83XX(ha))
+#define IS_PI_DIFB_DIX0_CAPABLE(ha)	(0)
+#define IS_PI_SPLIT_DET_CAPABLE_HBA(ha)	(IS_QLA83XX(ha))
+#define IS_PI_SPLIT_DET_CAPABLE(ha)	(IS_PI_SPLIT_DET_CAPABLE_HBA(ha) && \
+    (((ha)->fw_attributes_h << 16 | (ha)->fw_attributes) & BIT_22))
 
 	/* HBA serial number */
 	uint8_t		serial0;

drivers/scsi/qla2xxx/qla_init.c

@@ -5498,6 +5498,9 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		rval = 1;
 	}
 
+	if (IS_T10_PI_CAPABLE(ha))
+		nv->frame_payload_size &= ~7;
+
 	/* Reset Initialization control block */
 	memset(icb, 0, ha->init_cb_size);
 

drivers/scsi/qla2xxx/qla_iocb.c

@@ -147,13 +147,6 @@ qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts)
 	struct scsi_cmnd *cmd = GET_CMD_SP(sp);
 	uint8_t	guard = scsi_host_get_guard(cmd->device->host);
 
-	/* We only support T10 DIF right now */
-	if (guard != SHOST_DIX_GUARD_CRC) {
-		ql_dbg(ql_dbg_io, sp->fcport->vha, 0x3007,
-		    "Unsupported guard: %d for cmd=%p.\n", guard, cmd);
-		return 0;
-	}
-
 	/* We always use DIFF Bundling for best performance */
 	*fw_prot_opts = 0;
 
@@ -172,10 +165,11 @@ qla24xx_configure_prot_mode(srb_t *sp, uint16_t *fw_prot_opts)
 		*fw_prot_opts |= PO_MODE_DIF_REMOVE;
 		break;
 	case SCSI_PROT_READ_PASS:
-		*fw_prot_opts |= PO_MODE_DIF_PASS;
-		break;
 	case SCSI_PROT_WRITE_PASS:
-		*fw_prot_opts |= PO_MODE_DIF_PASS;
+		if (guard & SHOST_DIX_GUARD_IP)
+			*fw_prot_opts |= PO_MODE_DIF_TCP_CKSUM;
+		else
+			*fw_prot_opts |= PO_MODE_DIF_PASS;
 		break;
 	default:	/* Normal Request */
 		*fw_prot_opts |= PO_MODE_DIF_PASS;
@@ -821,7 +815,6 @@ qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
     unsigned int protcnt)
 {
 	struct scsi_cmnd *cmd = GET_CMD_SP(sp);
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 
 	switch (scsi_get_prot_type(cmd)) {
 	case SCSI_PROT_DIF_TYPE0:
@@ -891,12 +884,6 @@ qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
 		pkt->ref_tag_mask[3] = 0xff;
 		break;
 	}
-
-	ql_dbg(ql_dbg_io, vha, 0x3009,
-	    "Setting protection Tags: (BIG) ref tag = 0x%x, app tag = 0x%x, "
-	    "prot SG count %d, cmd lba 0x%x, prot_type=%u cmd=%p.\n",
-	    pkt->ref_tag, pkt->app_tag, protcnt, (int)scsi_get_lba(cmd),
-	    scsi_get_prot_type(cmd), cmd);
 }
 
 struct qla2_sgx {
@@ -1068,9 +1055,6 @@ qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
 	int	i;
 	uint16_t	used_dsds = tot_dsds;
 	struct scsi_cmnd *cmd = GET_CMD_SP(sp);
-	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-
-	uint8_t		*cp;
 
 	scsi_for_each_sg(cmd, sg, tot_dsds, i) {
 		dma_addr_t	sle_dma;
@@ -1113,19 +1097,12 @@ qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
 			cur_dsd = (uint32_t *)next_dsd;
 		}
 		sle_dma = sg_dma_address(sg);
-		ql_dbg(ql_dbg_io, vha, 0x300a,
-		    "sg entry %d - addr=0x%x 0x%x, " "len=%d for cmd=%p.\n",
-		    i, LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg), cmd);
+
 		*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
 		*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
 		*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
 		avail_dsds--;
 
-		if (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_PASS) {
-			cp = page_address(sg_page(sg)) + sg->offset;
-			ql_dbg(ql_dbg_io, vha, 0x300b,
-			    "User data buffer=%p for cmd=%p.\n", cp, cmd);
-		}
 	}
 	/* Null termination */
 	*cur_dsd++ = 0;
@@ -1148,8 +1125,6 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp,
 	struct scsi_cmnd *cmd;
 	uint32_t *cur_dsd = dsd;
 	uint16_t	used_dsds = tot_dsds;
-	scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
-	uint8_t		*cp;
 
 	cmd = GET_CMD_SP(sp);
 	scsi_for_each_prot_sg(cmd, sg, tot_dsds, i) {
@@ -1193,23 +1168,11 @@ qla24xx_walk_and_build_prot_sglist(struct qla_hw_data *ha, srb_t *sp,
 			cur_dsd = (uint32_t *)next_dsd;
 		}
 		sle_dma = sg_dma_address(sg);
-		if (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_PASS) {
-			ql_dbg(ql_dbg_io, vha, 0x3027,
-			    "%s(): %p, sg_entry %d - "
-			    "addr=0x%x0x%x, len=%d.\n",
-			    __func__, cur_dsd, i,
-			    LSD(sle_dma), MSD(sle_dma), sg_dma_len(sg));
-		}
+
 		*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
 		*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
 		*cur_dsd++ = cpu_to_le32(sg_dma_len(sg));
 
-		if (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_PASS) {
-			cp = page_address(sg_page(sg)) + sg->offset;
-			ql_dbg(ql_dbg_io, vha, 0x3028,
-			    "%s(): Protection Data buffer = %p.\n", __func__,
-			    cp);
-		}
 		avail_dsds--;
 	}
 	/* Null termination */
@@ -1386,6 +1349,16 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 
 	if (!qla2x00_hba_err_chk_enabled(sp))
 		fw_prot_opts |= 0x10; /* Disable Guard tag checking */
+	/* HBA error checking enabled */
+	else if (IS_PI_UNINIT_CAPABLE(ha)) {
+		if ((scsi_get_prot_type(GET_CMD_SP(sp)) == SCSI_PROT_DIF_TYPE1)
+		    || (scsi_get_prot_type(GET_CMD_SP(sp)) ==
+			SCSI_PROT_DIF_TYPE2))
+			fw_prot_opts |= BIT_10;
+		else if (scsi_get_prot_type(GET_CMD_SP(sp)) ==
+		    SCSI_PROT_DIF_TYPE3)
+			fw_prot_opts |= BIT_11;
+	}
 
 	if (!bundling) {
 		cur_dsd = (uint32_t *) &crc_ctx_pkt->u.nobundling.data_address;

drivers/scsi/qla2xxx/qla_isr.c

@@ -2163,6 +2163,19 @@ check_scsi_status:
 	case CS_DIF_ERROR:
 		logit = qla2x00_handle_dif_error(sp, sts24);
 		break;
+
+	case CS_TRANSPORT:
+		res = DID_ERROR << 16;
+
+		if (!IS_PI_SPLIT_DET_CAPABLE(ha))
+			break;
+
+		if (state_flags & BIT_4)
+			scmd_printk(KERN_WARNING, cp,
+			    "Unsupported device '%s' found.\n",
+			    cp->device->vendor);
+		break;
+
 	default:
 		res = DID_ERROR << 16;
 		break;

drivers/scsi/qla2xxx/qla_os.c

@@ -116,9 +116,8 @@ MODULE_PARM_DESC(ql2xmaxqdepth,
 		"Maximum queue depth to set for each LUN. "
 		"Default is 32.");
 
-/* Do not change the value of this after module load */
-int ql2xenabledif = 0;
-module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
+int ql2xenabledif = 2;
+module_param(ql2xenabledif, int, S_IRUGO);
 MODULE_PARM_DESC(ql2xenabledif,
 		" Enable T10-CRC-DIF "
 		" Default is 0 - No DIF Support. 1 - Enable it"
@@ -1358,6 +1357,9 @@ qla2xxx_slave_configure(struct scsi_device *sdev)
 	scsi_qla_host_t *vha = shost_priv(sdev->host);
 	struct req_que *req = vha->req;
 
+	if (IS_T10_PI_CAPABLE(vha->hw))
+		blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
+
 	if (sdev->tagged_supported)
 		scsi_activate_tcq(sdev, req->max_q_depth);
 	else
@@ -2574,7 +2576,7 @@ skip_dpc:
 
 	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
-			int prot = 0;
+			int prot = 0, guard;
 			base_vha->flags.difdix_supported = 1;
 			ql_dbg(ql_dbg_init, base_vha, 0x00f1,
 			    "Registering for DIF/DIX type 1 and 3 protection.\n");
@@ -2587,7 +2589,14 @@ skip_dpc:
 			    | SHOST_DIX_TYPE1_PROTECTION
 			    | SHOST_DIX_TYPE2_PROTECTION
 			    | SHOST_DIX_TYPE3_PROTECTION);
-			scsi_host_set_guard(host, SHOST_DIX_GUARD_CRC);
+
+			guard = SHOST_DIX_GUARD_CRC;
+
+			if (IS_PI_IPGUARD_CAPABLE(ha) &&
+			    (ql2xenabledif > 1 || IS_PI_DIFB_DIX0_CAPABLE(ha)))
+				guard |= SHOST_DIX_GUARD_IP;
+
+			scsi_host_set_guard(host, guard);
 		} else
 			base_vha->flags.difdix_supported = 0;
 	}