Merge branch 'next-samsung-asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into for-2.6.38

Documentation/ABI/obsolete/proc-pid-oom_adj

@@ -0,0 +1,22 @@
+What:	/proc/<pid>/oom_adj
+When:	August 2012
+Why:	/proc/<pid>/oom_adj allows userspace to influence the oom killer's
+	badness heuristic used to determine which task to kill when the kernel
+	is out of memory.
+
+	The badness heuristic has since been rewritten since the introduction of
+	this tunable such that its meaning is deprecated.  The value was
+	implemented as a bitshift on a score generated by the badness()
+	function that did not have any precise units of measure.  With the
+	rewrite, the score is given as a proportion of available memory to the
+	task allocating pages, so using a bitshift which grows the score
+	exponentially is, thus, impossible to tune with fine granularity.
+
+	A much more powerful interface, /proc/<pid>/oom_score_adj, was
+	introduced with the oom killer rewrite that allows users to increase or
+	decrease the badness() score linearly.  This interface will replace
+	/proc/<pid>/oom_adj.
+
+	A warning will be emitted to the kernel log if an application uses this
+	deprecated interface.  After it is printed once, future warnings will be
+	suppressed until the kernel is rebooted.

Documentation/arm/OMAP/DSS

@@ -255,9 +255,10 @@ framebuffer parameters.
 Kernel boot arguments
 ---------------------
 
-vram=<size>
-	- Amount of total VRAM to preallocate. For example, "10M". omapfb
-	  allocates memory for framebuffers from VRAM.
+vram=<size>[,<physaddr>]
+	- Amount of total VRAM to preallocate and optionally a physical start
+	  memory address. For example, "10M". omapfb allocates memory for
+	  framebuffers from VRAM.
 
 omapfb.mode=<display>:<mode>[,...]
 	- Default video mode for specified displays. For example,

Documentation/block/switching-sched.txt

@@ -16,7 +16,7 @@ you can do so by typing:
 As of the Linux 2.6.10 kernel, it is now possible to change the
 IO scheduler for a given block device on the fly (thus making it possible,
 for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the anticipatory or noop schedulers - which
+set a specific device to use the deadline or noop schedulers - which
 can improve that device's throughput).
 
 To set a specific scheduler, simply do this:
@@ -31,7 +31,7 @@ a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
 # cat /sys/block/hda/queue/scheduler
-noop anticipatory deadline [cfq]
-# echo anticipatory > /sys/block/hda/queue/scheduler
+noop deadline [cfq]
+# echo deadline > /sys/block/hda/queue/scheduler
 # cat /sys/block/hda/queue/scheduler
-noop [anticipatory] deadline cfq
+noop [deadline] cfq

Documentation/feature-removal-schedule.txt

@@ -554,3 +554,13 @@ Why:    This is a legacy interface which have been replaced by a more
 Who:    NeilBrown <neilb@suse.de>
 
 ----------------------------
+
+What:	i2c_adapter.id
+When:	June 2011
+Why:	This field is deprecated. I2C device drivers shouldn't change their
+	behavior based on the underlying I2C adapter. Instead, the I2C
+	adapter driver should instantiate the I2C devices and provide the
+	needed platform-specific information.
+Who:	Jean Delvare <khali@linux-fr.org>
+
+----------------------------

Documentation/filesystems/xfs-delayed-logging-design.txt

@@ -794,17 +794,6 @@ designed.
 
 Roadmap:
 
-2.6.37 Remove experimental tag from mount option
-	=> should be roughly 6 months after initial merge
-	=> enough time to:
-		=> gain confidence and fix problems reported by early
-		   adopters (a.k.a. guinea pigs)
-		=> address worst performance regressions and undesired
-		   behaviours
-		=> start tuning/optimising code for parallelism
-		=> start tuning/optimising algorithms consuming
-		   excessive CPU time
-
 2.6.39 Switch default mount option to use delayed logging
 	=> should be roughly 12 months after initial merge
 	=> enough time to shake out remaining problems before next round of

Documentation/kernel-parameters.txt

@@ -706,7 +706,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			arch/x86/kernel/cpu/cpufreq/elanfreq.c.
 
 	elevator=	[IOSCHED]
-			Format: {"anticipatory" | "cfq" | "deadline" | "noop"}
+			Format: {"cfq" | "deadline" | "noop"}
 			See Documentation/block/as-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 

Documentation/leds-class.txt

@@ -60,15 +60,18 @@ Hardware accelerated blink of LEDs
 
 Some LEDs can be programmed to blink without any CPU interaction. To
 support this feature, a LED driver can optionally implement the
-blink_set() function (see <linux/leds.h>). If implemented, triggers can
-attempt to use it before falling back to software timers. The blink_set()
-function should return 0 if the blink setting is supported, or -EINVAL
-otherwise, which means that LED blinking will be handled by software.
-
-The blink_set() function should choose a user friendly blinking
-value if it is called with *delay_on==0 && *delay_off==0 parameters. In
-this case the driver should give back the chosen value through delay_on
-and delay_off parameters to the leds subsystem.
+blink_set() function (see <linux/leds.h>). To set an LED to blinking,
+however, it is better to use use the API function led_blink_set(),
+as it will check and implement software fallback if necessary.
+
+To turn off blinking again, use the API function led_brightness_set()
+as that will not just set the LED brightness but also stop any software
+timers that may have been required for blinking.
+
+The blink_set() function should choose a user friendly blinking value
+if it is called with *delay_on==0 && *delay_off==0 parameters. In this
+case the driver should give back the chosen value through delay_on and
+delay_off parameters to the leds subsystem.
 
 Setting the brightness to zero with brightness_set() callback function
 should completely turn off the LED and cancel the previously programmed

Documentation/leds/leds-lp5521.txt

@@ -0,0 +1,88 @@
+Kernel driver for lp5521
+========================
+
+* National Semiconductor LP5521 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5521.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+
+LP5521 can drive up to 3 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5521:channelx, where x is 0 .. 2
+
+All three channels can be also controlled using the engine micro programs.
+More details of the instructions can be found from the public data sheet.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : store program (visible only in engine load mode)
+
+Example (start to blink the channel 2 led):
+cd   /sys/class/leds/lp5521:channel2/device
+echo "load" > engine3_mode
+echo "037f4d0003ff6000" > engine3_load
+echo "run" > engine3_mode
+
+stop the engine:
+echo "disabled" > engine3_mode
+
+sysfs contains a selftest entry.
+The test communicates with the chip and checks that
+the clock mode is automatically set to the requested one.
+
+Each channel has its own led current settings.
+/sys/class/leds/lp5521:channel0/led_current - RW
+/sys/class/leds/lp5521:channel0/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+example platform data:
+
+Note: chan_nr can have values between 0 and 2.
+
+static struct lp5521_led_config lp5521_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 1,
+                .led_current    = 0,
+		.max_current    = 130,
+        }, {
+                .chan_nr        = 2,
+                .led_current    = 0,
+		.max_current    = 130,
+        }
+};
+
+static int lp5521_setup(void)
+{
+	/* setup HW resources */
+}
+
+static void lp5521_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5521_enable(bool state)
+{
+	/* Control of chip enable signal */
+}
+
+static struct lp5521_platform_data lp5521_platform_data = {
+        .led_config     = lp5521_led_config,
+        .num_channels   = ARRAY_SIZE(lp5521_led_config),
+        .clock_mode     = LP5521_CLOCK_EXT,
+        .setup_resources   = lp5521_setup,
+        .release_resources = lp5521_release,
+        .enable            = lp5521_enable,
+};
+
+If the current is set to 0 in the platform data, that channel is
+disabled and it is not visible in the sysfs.

Documentation/leds/leds-lp5523.txt

@@ -0,0 +1,83 @@
+Kernel driver for lp5523
+========================
+
+* National Semiconductor LP5523 led driver chip
+* Datasheet: http://www.national.com/pf/LP/LP5523.html
+
+Authors: Mathias Nyman, Yuri Zaporozhets, Samu Onkalo
+Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com)
+
+Description
+-----------
+LP5523 can drive up to 9 channels. Leds can be controlled directly via
+the led class control interface. Channels have generic names:
+lp5523:channelx where x is 0...8
+
+The chip provides 3 engines. Each engine can control channels without
+interaction from the main CPU. Details of the micro engine code can be found
+from the public data sheet. Leds can be muxed to different channels.
+
+Control interface for the engines:
+x is 1 .. 3
+enginex_mode : disabled, load, run
+enginex_load : microcode load (visible only in load mode)
+enginex_leds : led mux control (visible only in load mode)
+
+cd /sys/class/leds/lp5523:channel2/device
+echo "load" > engine3_mode
+echo "9d80400004ff05ff437f0000" > engine3_load
+echo "111111111" > engine3_leds
+echo "run" > engine3_mode
+
+sysfs contains a selftest entry. It measures each channel
+voltage level and checks if it looks reasonable. If the level is too high,
+the led is missing; if the level is too low, there is a short circuit.
+
+Selftest uses always the current from the platform data.
+
+Each channel contains led current settings.
+/sys/class/leds/lp5523:channel2/led_current - RW
+/sys/class/leds/lp5523:channel2/max_current - RO
+Format: 10x mA i.e 10 means 1.0 mA
+
+Example platform data:
+
+Note - chan_nr can have values between 0 and 8.
+
+static struct lp5523_led_config lp5523_led_config[] = {
+        {
+                .chan_nr        = 0,
+                .led_current    = 50,
+		.max_current    = 130,
+        },
+...
+        }, {
+                .chan_nr        = 8,
+                .led_current    = 50,
+		.max_current    = 130,
+        }
+};
+
+static int lp5523_setup(void)
+{
+	/* Setup HW resources */
+}
+
+static void lp5523_release(void)
+{
+	/* Release HW resources */
+}
+
+static void lp5523_enable(bool state)
+{
+	/* Control chip enable signal */
+}
+
+static struct lp5523_platform_data lp5523_platform_data = {
+        .led_config     = lp5523_led_config,
+        .num_channels   = ARRAY_SIZE(lp5523_led_config),
+        .clock_mode     = LP5523_CLOCK_EXT,
+        .setup_resources   = lp5523_setup,
+        .release_resources = lp5523_release,
+        .enable            = lp5523_enable,
+};

Documentation/networking/ip-sysctl.txt

@@ -20,6 +20,15 @@ ip_no_pmtu_disc - BOOLEAN
 min_pmtu - INTEGER
 	default 562 - minimum discovered Path MTU
 
+route/max_size - INTEGER
+	Maximum number of routes allowed in the kernel.  Increase
+	this when using large numbers of interfaces and/or routes.
+
+neigh/default/gc_thresh3 - INTEGER
+	Maximum number of neighbor entries allowed.  Increase this
+	when using large numbers of interfaces and when communicating
+	with large numbers of directly-connected peers.
+
 mtu_expires - INTEGER
 	Time, in seconds, that cached PMTU information is kept.
 

Documentation/rbtree.txt

@@ -21,8 +21,8 @@ three rotations, respectively, to balance the tree), with slightly slower
 To quote Linux Weekly News:
 
     There are a number of red-black trees in use in the kernel.
-    The anticipatory, deadline, and CFQ I/O schedulers all employ
-    rbtrees to track requests; the packet CD/DVD driver does the same.
+    The deadline and CFQ I/O schedulers employ rbtrees to
+    track requests; the packet CD/DVD driver does the same.
     The high-resolution timer code uses an rbtree to organize outstanding
     timer requests.  The ext3 filesystem tracks directory entries in a
     red-black tree.  Virtual memory areas (VMAs) are tracked with red-black

Documentation/sysctl/kernel.txt

@@ -28,6 +28,7 @@ show up in /proc/sys/kernel:
 - core_uses_pid
 - ctrl-alt-del
 - dentry-state
+- dmesg_restrict
 - domainname
 - hostname
 - hotplug
@@ -213,6 +214,19 @@ to decide what to do with it.
 
 ==============================================================
 
+dmesg_restrict:
+
+This toggle indicates whether unprivileged users are prevented from using
+dmesg(8) to view messages from the kernel's log buffer.  When
+dmesg_restrict is set to (0) there are no restrictions.  When
+dmesg_restrict is set set to (1), users must have CAP_SYS_ADMIN to use
+dmesg(8).
+
+The kernel config option CONFIG_SECURITY_DMESG_RESTRICT sets the default
+value of dmesg_restrict.
+
+==============================================================
+
 domainname & hostname:
 
 These files can be used to set the NIS/YP domainname and the

MAINTAINERS

@@ -161,7 +161,7 @@ M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
@@ -945,7 +945,7 @@ M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-sh@vger.kernel.org
 W:	http://oss.renesas.com
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/genesis-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git rmobile-latest
 S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
@@ -2435,6 +2435,7 @@ F:	drivers/net/wan/sdla.c
 FRAMEBUFFER LAYER
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
 S:	Orphan
 F:	Documentation/fb/
 F:	drivers/video/fb*
@@ -5676,7 +5677,7 @@ S:	Maintained
 
 STAGING SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6.git
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
@@ -5705,7 +5706,7 @@ M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 Q:	http://patchwork.kernel.org/project/linux-sh/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git sh-latest
 S:	Supported
 F:	Documentation/sh/
 F:	arch/sh/
@@ -5910,7 +5911,7 @@ S:	Maintained
 TTY LAYER
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h
@@ -6233,7 +6234,7 @@ USB SUBSYSTEM
 M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
-T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
 S:	Supported
 F:	Documentation/usb/
 F:	drivers/net/usb/
@@ -6598,14 +6599,14 @@ F:	drivers/platform/x86
 
 XEN PCI SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/pci/*xen*
 F:	drivers/pci/*xen*
 
 XEN SWIOTLB SUBSYSTEM
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
@@ -6613,7 +6614,7 @@ F:	drivers/xen/*swiotlb*
 XEN HYPERVISOR INTERFACE
 M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xen.org
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	arch/x86/xen/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 37
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -6,7 +6,7 @@ config ARM
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
-	select GENERIC_ATOMIC64 if (!CPU_32v6K)
+	select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
 	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
@@ -646,7 +646,7 @@ config ARCH_S3C2410
 	select ARCH_HAS_CPUFREQ
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_I2C if I2C
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -676,8 +676,8 @@ config ARCH_S3C64XX
 	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
 	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S3C64XX series based systems
 
@@ -686,10 +686,10 @@ config ARCH_S5P64X0
 	select CPU_V6
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -700,7 +700,7 @@ config ARCH_S5P6442
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5P6442 CPU based systems
 
@@ -711,9 +711,9 @@ config ARCH_S5PC100
 	select CPU_V7
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PC100 series based systems
 
@@ -726,9 +726,9 @@ config ARCH_S5PV210
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -739,9 +739,9 @@ config ARCH_S5PV310
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC
-	select HAVE_S3C2410_I2C
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	help
 	  Samsung S5PV310 series based systems
 

arch/arm/common/gic.c

@@ -251,15 +251,16 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 		writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
 	/*
-	 * Set priority on all interrupts.
+	 * Set priority on all global interrupts.
 	 */
-	for (i = 0; i < max_irq; i += 4)
+	for (i = 32; i < max_irq; i += 4)
 		writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
 
 	/*
-	 * Disable all interrupts.
+	 * Disable all interrupts.  Leave the PPI and SGIs alone
+	 * as these enables are banked registers.
 	 */
-	for (i = 0; i < max_irq; i += 32)
+	for (i = 32; i < max_irq; i += 32)
 		writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
 
 	/*
@@ -277,11 +278,30 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
 
 void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
+	void __iomem *dist_base;
+	int i;
+
 	if (gic_nr >= MAX_GIC_NR)
 		BUG();
 
+	dist_base = gic_data[gic_nr].dist_base;
+	BUG_ON(!dist_base);
+
 	gic_data[gic_nr].cpu_base = base;
 
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }

arch/arm/include/asm/hardware/it8152.h

@@ -75,7 +75,7 @@ extern unsigned long it8152_base_address;
   IT8152_PD_IRQ(1)  USB (USBR)
   IT8152_PD_IRQ(0)  Audio controller (ACR)
  */
-#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+#define IT8152_IRQ(x)   (IRQ_BOARD_START + (x))
 
 /* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
 #define IT8152_LD_IRQ_COUNT     9

arch/arm/kernel/hw_breakpoint.c

@@ -748,8 +748,7 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
 		breakpoint_handler(addr, regs);
 		break;
 	case ARM_ENTRY_ASYNC_WATCHPOINT:
-		WARN_ON("Asynchronous watchpoint exception taken. "
-			"Debugging results may be unreliable");
+		WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
 	case ARM_ENTRY_SYNC_WATCHPOINT:
 		watchpoint_handler(addr, regs);
 		break;

arch/arm/kernel/perf_event.c

@@ -1749,7 +1749,7 @@ static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
 static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
 					enum armv7_counters counter)
 {
-	int ret;
+	int ret = 0;
 
 	if (counter == ARMV7_CYCLE_COUNTER)
 		ret = pmnc & ARMV7_FLAG_C;

arch/arm/kernel/stacktrace.c

@@ -28,7 +28,7 @@ int notrace unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	/* check current frame pointer is within bounds */
 	if (fp < (low + 12) || fp + 4 >= high)

arch/arm/kernel/traps.c

@@ -53,10 +53,7 @@ static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
-	sprint_symbol(sym1, where);
-	sprint_symbol(sym2, from);
-	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
+	printk("[<%08lx>] (%pS) from [<%08lx>] (%pS)\n", where, (void *)where, from, (void *)from);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif

arch/arm/kernel/unwind.c

@@ -279,7 +279,7 @@ int unwind_frame(struct stackframe *frame)
 
 	/* only go to a higher address on the stack */
 	low = frame->sp;
-	high = ALIGN(low, THREAD_SIZE) + THREAD_SIZE;
+	high = ALIGN(low, THREAD_SIZE);
 
 	pr_debug("%s(pc = %08lx lr = %08lx sp = %08lx)\n", __func__,
 		 frame->pc, frame->lr, frame->sp);

arch/arm/mach-ep93xx/include/mach/dma.h

@@ -1,5 +1,13 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/dma.h
+/**
+ * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine
+ *
+ * The EP93xx DMA M2P subsystem handles DMA transfers between memory and
+ * peripherals. DMA M2P channels are available for audio, UARTs and IrDA.
+ * See chapter 10 of the EP93xx users guide for full details on the DMA M2P
+ * engine.
+ *
+ * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code.
+ *
  */
 
 #ifndef __ASM_ARCH_DMA_H
@@ -8,12 +16,34 @@
 #include <linux/list.h>
 #include <linux/types.h>
 
+/**
+ * struct ep93xx_dma_buffer - Information about a buffer to be transferred
+ * using the DMA M2P engine
+ *
+ * @list: Entry in DMA buffer list
+ * @bus_addr: Physical address of the buffer
+ * @size: Size of the buffer in bytes
+ */
 struct ep93xx_dma_buffer {
 	struct list_head	list;
 	u32			bus_addr;
 	u16			size;
 };
 
+/**
+ * struct ep93xx_dma_m2p_client - Information about a DMA M2P client
+ *
+ * @name: Unique name for this client
+ * @flags: Client flags
+ * @cookie: User data to pass to callback functions
+ * @buffer_started: Non NULL function to call when a transfer is started.
+ * 			The arguments are the user data cookie and the DMA
+ *			buffer which is starting.
+ * @buffer_finished: Non NULL function to call when a transfer is completed.
+ *			The arguments are the user data cookie, the DMA buffer
+ *			which has completed, and a boolean flag indicating if
+ *			the transfer had an error.
+ */
 struct ep93xx_dma_m2p_client {
 	char			*name;
 	u8			flags;
@@ -24,10 +54,11 @@ struct ep93xx_dma_m2p_client {
 					struct ep93xx_dma_buffer *buf,
 					int bytes, int error);
 
-	/* Internal to the DMA code.  */
+	/* private: Internal use only */
 	void			*channel;
 };
 
+/* DMA M2P ports */
 #define EP93XX_DMA_M2P_PORT_I2S1	0x00
 #define EP93XX_DMA_M2P_PORT_I2S2	0x01
 #define EP93XX_DMA_M2P_PORT_AAC1	0x02
@@ -39,18 +70,80 @@ struct ep93xx_dma_m2p_client {
 #define EP93XX_DMA_M2P_PORT_UART3	0x08
 #define EP93XX_DMA_M2P_PORT_IRDA	0x09
 #define EP93XX_DMA_M2P_PORT_MASK	0x0f
-#define EP93XX_DMA_M2P_TX		0x00
-#define EP93XX_DMA_M2P_RX		0x10
-#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20
-#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40
-#define EP93XX_DMA_M2P_ERROR_MASK	0x60
 
-int  ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+/* DMA M2P client flags */
+#define EP93XX_DMA_M2P_TX		0x00	/* Memory to peripheral */
+#define EP93XX_DMA_M2P_RX		0x10	/* Peripheral to memory */
+
+/*
+ * DMA M2P client error handling flags. See the EP93xx users guide
+ * documentation on the DMA M2P CONTROL register for more details
+ */
+#define EP93XX_DMA_M2P_ABORT_ON_ERROR	0x20	/* Abort on peripheral error */
+#define EP93XX_DMA_M2P_IGNORE_ERROR	0x40	/* Ignore peripheral errors */
+#define EP93XX_DMA_M2P_ERROR_MASK	0x60	/* Mask of error bits */
+
+/**
+ * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client information to register
+ * returns 0 on success
+ *
+ * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA
+ * client
+ */
+int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P
+ * subsystem
+ *
+ * @m2p: Client to unregister
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ */
 void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p);
+
+/**
+ * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * If the current or next transfer positions are free on the M2P client then
+ * the transfer is started immediately. If not, the transfer is added to the
+ * list of pending transfers. This function must not be called from the
+ * buffer_finished callback for an M2P channel.
+ *
+ */
 void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p,
 			   struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list
+ * for an M2P channel
+ *
+ * @m2p: DMA Client to submit the transfer on
+ * @buf: DMA Buffer to submit
+ *
+ * This function must only be called from the buffer_finished callback for an
+ * M2P channel. It is commonly used to add the next transfer in a chained list
+ * of DMA transfers.
+ */
 void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p,
 				     struct ep93xx_dma_buffer *buf);
+
+/**
+ * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client
+ *
+ * @m2p: DMA client to flush transfers on
+ *
+ * Any transfers currently in progress will be completed in hardware, but
+ * ignored in software.
+ *
+ */
 void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p);
 
 #endif /* __ASM_ARCH_DMA_H */

arch/arm/mach-kirkwood/common.c

@@ -854,10 +854,9 @@ int __init kirkwood_find_tclk(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
-					rev == MV88F6281_REV_A1)) ||
-	    (dev == MV88F6282_DEV_ID))
-		return 200000000;
+	if (dev == MV88F6281_DEV_ID || dev == MV88F6282_DEV_ID)
+		if (((readl(SAMPLE_AT_RESET) >> 21) & 1) == 0)
+			return 200000000;
 
 	return 166666667;
 }

arch/arm/mach-kirkwood/d2net_v2-setup.c

@@ -225,5 +225,5 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
 	.init_machine	= d2net_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END

arch/arm/mach-kirkwood/lacie_v2-common.c

@@ -111,17 +111,3 @@ void __init lacie_v2_hdd_power_init(int hdd_num)
 			pr_err("Failed to power up HDD%d\n", i + 1);
 	}
 }
-
-/*****************************************************************************
- * Timer
- ****************************************************************************/
-
-static void lacie_v2_timer_init(void)
-{
-	kirkwood_tclk = 166666667;
-	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
-}
-
-struct sys_timer lacie_v2_timer = {
-	.init = lacie_v2_timer_init,
-};

arch/arm/mach-kirkwood/lacie_v2-common.h

@@ -13,6 +13,4 @@ void lacie_v2_register_flash(void);
 void lacie_v2_register_i2c_devices(void);
 void lacie_v2_hdd_power_init(int hdd_num);
 
-extern struct sys_timer lacie_v2_timer;
-
 #endif

arch/arm/mach-kirkwood/mpp.c

@@ -59,7 +59,7 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -88,8 +88,6 @@ void __init kirkwood_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");

arch/arm/mach-kirkwood/netspace_v2-setup.c

@@ -262,7 +262,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -272,7 +272,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -282,6 +282,6 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
 	.init_machine	= netspace_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif

arch/arm/mach-kirkwood/netxbig_v2-setup.c

@@ -403,7 +403,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif
 
@@ -413,6 +413,6 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
 	.init_machine	= netxbig_v2_init,
 	.map_io		= kirkwood_map_io,
 	.init_irq	= kirkwood_init_irq,
-	.timer		= &lacie_v2_timer,
+	.timer		= &kirkwood_timer,
 MACHINE_END
 #endif

arch/arm/mach-kirkwood/ts41x-setup.c

@@ -27,6 +27,10 @@
 #include "mpp.h"
 #include "tsx1x-common.h"
 
+/* for the PCIe reset workaround */
+#include <plat/pcie.h>
+
+
 #define QNAP_TS41X_JUMPER_JP1	45
 
 static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
@@ -140,8 +144,16 @@ static void __init qnap_ts41x_init(void)
 
 static int __init ts41x_pci_init(void)
 {
-	if (machine_is_ts41x())
+	if (machine_is_ts41x()) {
+		/*
+		 * Without this explicit reset, the PCIe SATA controller
+		 * (Marvell 88sx7042/sata_mv) is known to stop working
+		 * after a few minutes.
+		 */
+		orion_pcie_reset((void __iomem *)PCIE_VIRT_BASE);
+
 		kirkwood_pcie_init(KW_PCIE0);
+	}
 
    return 0;
 }

arch/arm/mach-mmp/include/mach/cputype.h

@@ -46,7 +46,8 @@ static inline int cpu_is_pxa910(void)
 #ifdef CONFIG_CPU_MMP2
 static inline int cpu_is_mmp2(void)
 {
-	return (((cpu_readid_id() >> 8) & 0xff) == 0x58);
+	return (((read_cpuid_id() >> 8) & 0xff) == 0x58);
+}
 #else
 #define cpu_is_mmp2()	(0)
 #endif

arch/arm/mach-mv78xx0/mpp.c

@@ -54,7 +54,7 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 	}
 	printk("\n");
 
-	while (*mpp_list) {
+	for ( ; *mpp_list; mpp_list++) {
 		unsigned int num = MPP_NUM(*mpp_list);
 		unsigned int sel = MPP_SEL(*mpp_list);
 		int shift, gpio_mode;
@@ -83,8 +83,6 @@ void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
 		if (sel != 0)
 			gpio_mode = 0;
 		orion_gpio_set_valid(num, gpio_mode);
-
-		mpp_list++;
 	}
 
 	printk(KERN_DEBUG "  final MPP regs:");

arch/arm/mach-omap1/devices.c

@@ -321,10 +321,9 @@ static struct platform_device omap_wdt_device = {
 static int __init omap_init_wdt(void)
 {
 	if (!cpu_is_omap16xx())
-		return;
+		return -ENODEV;
 
-	platform_device_register(&omap_wdt_device);
-	return 0;
+	return platform_device_register(&omap_wdt_device);
 }
 subsys_initcall(omap_init_wdt);
 #endif

arch/arm/mach-omap1/include/mach/camera.h

@@ -1,6 +1,8 @@
 #ifndef __ASM_ARCH_CAMERA_H_
 #define __ASM_ARCH_CAMERA_H_
 
+#include <media/omap1_camera.h>
+
 void omap1_camera_init(void *);
 
 static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)

arch/arm/mach-omap2/board-devkit8000.c

@@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 	mmc[0].gpio_cd = gpio + 0;
 	omap2_hsmmc_init(mmc);
 
-	/* link regulators to MMC adapters */
-	devkit8000_vmmc1_supply.dev = mmc[0].dev;
-
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
 

arch/arm/mach-orion5x/mpp.c

@@ -127,7 +127,7 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 	/* Initialize gpiolib. */
 	orion_gpio_init();
 
-	while (mode->mpp >= 0) {
+	for ( ; mode->mpp >= 0; mode++) {
 		u32 *reg;
 		int num_type;
 		int shift;
@@ -160,8 +160,6 @@ void __init orion5x_mpp_conf(struct orion5x_mpp_mode *mode)
 			orion_gpio_set_unused(mode->mpp);
 
 		orion_gpio_set_valid(mode->mpp, !!(mode->type == MPP_GPIO));
-
-		mode++;
 	}
 
 	writel(mpp_0_7_ctrl, MPP_0_7_CTRL);

arch/arm/mach-orion5x/ts78xx-setup.c

@@ -239,7 +239,7 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 static struct resource ts78xx_ts_nand_resources = {
 	.start		= TS_NAND_DATA,
 	.end		= TS_NAND_DATA + 4,
-	.flags		= IORESOURCE_IO,
+	.flags		= IORESOURCE_MEM,
 };
 
 static struct platform_device ts78xx_ts_nand_device = {

arch/arm/mach-pxa/cm-x2xx.c

@@ -476,8 +476,6 @@ static void __init cmx2xx_init(void)
 
 static void __init cmx2xx_init_irq(void)
 {
-	pxa27x_init_irq();
-
 	if (cpu_is_pxa25x()) {
 		pxa25x_init_irq();
 		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);

arch/arm/mach-pxa/saar.c

@@ -116,7 +116,7 @@ static struct platform_device smc91x_device = {
 	},
 };
 
-#if defined(CONFIG_FB_PXA) || (CONFIG_FB_PXA_MODULE)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static uint16_t lcd_power_on[] = {
 	/* single frame */
 	SMART_CMD_NOOP,

arch/arm/mach-s3c64xx/Kconfig

@@ -143,7 +143,7 @@ config MACH_SMDK6410
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select SAMSUNG_DEV_KEYPAD
-	select HAVE_S3C2410_WATCHDOG
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_IDE

arch/arm/mach-s3c64xx/clock.c

@@ -695,7 +695,7 @@ static struct clksrc_clk clksrcs[] = {
 	}, {
 		.clk	= {
 			.name		= "audio-bus",
-			.id		= -1,  /* There's only one IISv4 port */
+			.id		= 2,
 			.ctrlbit        = S3C6410_CLKCON_SCLK_AUDIO2,
 			.enable		= s3c64xx_sclk_ctrl,
 		},

arch/arm/mach-s3c64xx/dev-audio.c

@@ -22,7 +22,12 @@
 #include <plat/audio.h>
 #include <plat/gpio-cfg.h>
 
-static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "audio-bus",
+};
+
+static int s3c64xx_i2s_cfg_gpio(struct platform_device *pdev)
 {
 	unsigned int base;
 
@@ -33,6 +38,12 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 	case 1:
 		base = S3C64XX_GPE(0);
 		break;
+	case 2:
+		s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
+		return 0;
 	default:
 		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
 			pdev->id);
@@ -44,16 +55,6 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 	return 0;
 }
 
-static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
-	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
-	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
-	s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
-
-	return 0;
-}
-
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = {
 		.start = S3C64XX_PA_IIS0,
@@ -72,17 +73,22 @@ static struct resource s3c64xx_iis0_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2s0_pdata = {
-	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 struct platform_device s3c64xx_device_iis0 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 0,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis0_resource),
 	.resource	  = s3c64xx_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s0_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis0);
@@ -105,17 +111,13 @@ static struct resource s3c64xx_iis1_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2s1_pdata = {
-	.cfg_gpio = s3c64xx_i2sv3_cfg_gpio,
-};
-
 struct platform_device s3c64xx_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iis1_resource),
 	.resource	  = s3c64xx_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s1_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iis1);
@@ -138,17 +140,23 @@ static struct resource s3c64xx_iisv4_resource[] = {
 	},
 };
 
-static struct s3c_audio_pdata s3c_i2sv4_pdata = {
-	.cfg_gpio = s3c64xx_i2sv4_cfg_gpio,
+static struct s3c_audio_pdata i2sv4_pdata = {
+	.cfg_gpio = s3c64xx_i2s_cfg_gpio,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 struct platform_device s3c64xx_device_iisv4 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 2,
 	.num_resources	  = ARRAY_SIZE(s3c64xx_iisv4_resource),
 	.resource	  = s3c64xx_iisv4_resource,
 	.dev = {
-		.platform_data = &s3c_i2sv4_pdata,
+		.platform_data = &i2sv4_pdata,
 	},
 };
 EXPORT_SYMBOL(s3c64xx_device_iisv4);

arch/arm/mach-s5p6442/dev-audio.c

@@ -29,7 +29,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 		base = S5P6442_GPC1(0);
 		break;
 
-	case -1:
+	case 0:
 		base = S5P6442_GPC0(0);
 		break;
 
@@ -42,8 +42,19 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v35[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
+static struct s3c_audio_pdata i2sv35_pdata = {
 	.cfg_gpio = s5p6442_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v35,
+		},
+	},
 };
 
 static struct resource s5p6442_iis0_resource[] = {
@@ -62,15 +73,34 @@ static struct resource s5p6442_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5p6442_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 0,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis0_resource),
 	.resource	  = s5p6442_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv35_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5p6442_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -93,12 +123,12 @@ static struct resource s5p6442_iis1_resource[] = {
 };
 
 struct platform_device s5p6442_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5p6442_iis1_resource),
 	.resource	  = s5p6442_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 

arch/arm/mach-s5p64x0/clock-s5p6440.c

@@ -261,7 +261,7 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 25),
 	}, {
-		.name		= "i2s_v40",
+		.name		= "iis",
 		.id		= 0,
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,

arch/arm/mach-s5p64x0/clock-s5p6450.c

@@ -256,7 +256,7 @@ static struct clk init_clocks_disable[] = {
 		.ctrlbit	= (1 << 22),
 	}, {
 		.name		= "iis",
-		.id		= -1,
+		.id		= 0,
 		.parent		= &clk_pclk_low.clk,
 		.enable		= s5p64x0_pclk_ctrl,
 		.ctrlbit	= (1 << 26),

arch/arm/mach-s5p64x0/dev-audio.c

@@ -19,15 +19,19 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
-static int s5p6440_cfg_i2s(struct platform_device *pdev)
+static const char *rclksrc[] = {
+	[0] = "iis",
+	[1] = "sclk_audio2",
+};
+
+static int s5p64x0_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
-	case -1:
+	case 0:
 		s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
 		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
 		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -36,31 +40,14 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static int s5p6450_cfg_i2s(struct platform_device *pdev)
-{
-	/* configure GPIO for i2s port */
-	switch (pdev->id) {
-	case -1:
-		s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
-
-		break;
-
-	default:
-		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static struct s3c_audio_pdata s5p6440_i2s_pdata = {
-	.cfg_gpio = s5p6440_cfg_i2s,
-};
-
-static struct s3c_audio_pdata s5p6450_i2s_pdata = {
-	.cfg_gpio = s5p6450_cfg_i2s,
+static struct s3c_audio_pdata s5p64x0_i2s_pdata = {
+	.cfg_gpio = s5p64x0_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 static struct resource s5p64x0_iis0_resource[] = {
@@ -82,22 +69,22 @@ static struct resource s5p64x0_iis0_resource[] = {
 };
 
 struct platform_device s5p6440_device_iis = {
-	.name		= "s3c64xx-iis-v4",
-	.id		= -1,
+	.name		= "samsung-i2s",
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
 	.resource	= s5p64x0_iis0_resource,
 	.dev = {
-		.platform_data = &s5p6440_i2s_pdata,
+		.platform_data = &s5p64x0_i2s_pdata,
 	},
 };
 
 struct platform_device s5p6450_device_iis0 = {
-	.name		= "s3c64xx-iis-v4",
-	.id		= -1,
+	.name		= "samsung-i2s",
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5p64x0_iis0_resource),
 	.resource	= s5p64x0_iis0_resource,
 	.dev = {
-		.platform_data = &s5p6450_i2s_pdata,
+		.platform_data = &s5p64x0_i2s_pdata,
 	},
 };
 

arch/arm/mach-s5pc100/dev-audio.c

@@ -23,17 +23,14 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
+	case 0: /* Dedicated pins */
+		break;
 	case 1:
 		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
 		break;
-
 	case 2:
 		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
 		break;
-
-	case -1: /* Dedicated pins */
-		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -42,8 +39,20 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static const char *rclksrc_v5[] = {
+	[0] = "iis",
+	[1] = "i2sclkd2",
+};
+
+static struct s3c_audio_pdata i2sv5_pdata = {
 	.cfg_gpio = s5pc100_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc_v5,
+		},
+	},
 };
 
 static struct resource s5pc100_iis0_resource[] = {
@@ -62,15 +71,34 @@ static struct resource s5pc100_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5pc100_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 0,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis0_resource),
 	.resource	  = s5pc100_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "sclk_audio",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pc100_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -93,12 +121,12 @@ static struct resource s5pc100_iis1_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis1_resource),
 	.resource	  = s5pc100_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
@@ -121,12 +149,12 @@ static struct resource s5pc100_iis2_resource[] = {
 };
 
 struct platform_device s5pc100_device_iis2 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s5pc100_iis2_resource),
 	.resource	  = s5pc100_iis2_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 

arch/arm/mach-s5pv210/clock.c

@@ -467,20 +467,20 @@ static struct clk init_clocks_disable[] = {
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<21),
 	}, {
-		.name		= "i2s_v50",
+		.name		= "iis",
 		.id		= 0,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1<<4),
 	}, {
-		.name		= "i2s_v32",
-		.id		= 0,
+		.name		= "iis",
+		.id		= 1,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
-		.name		= "i2s_v32",
-		.id		= 1,
+		.name		= "iis",
+		.id		= 2,
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 6),

arch/arm/mach-s5pv210/dev-audio.c

@@ -19,22 +19,24 @@
 #include <mach/dma.h>
 #include <mach/irqs.h>
 
+static const char *rclksrc[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
 static int s5pv210_cfg_i2s(struct platform_device *pdev)
 {
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
+		break;
 	case 1:
 		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
 		break;
-
 	case 2:
 		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
 		break;
-
-	case -1:
-		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
-		break;
-
 	default:
 		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
 		return -EINVAL;
@@ -43,8 +45,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 	return 0;
 }
 
-static struct s3c_audio_pdata s3c_i2s_pdata = {
+static struct s3c_audio_pdata i2sv5_pdata = {
 	.cfg_gpio = s5pv210_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc,
+		},
+	},
 };
 
 static struct resource s5pv210_iis0_resource[] = {
@@ -63,15 +72,34 @@ static struct resource s5pv210_iis0_resource[] = {
 		.end   = DMACH_I2S0_RX,
 		.flags = IORESOURCE_DMA,
 	},
+	[3] = {
+		.start = DMACH_I2S0S_TX,
+		.end = DMACH_I2S0S_TX,
+		.flags = IORESOURCE_DMA,
+	},
 };
 
 struct platform_device s5pv210_device_iis0 = {
-	.name		  = "s3c64xx-iis-v4",
-	.id		  = -1,
+	.name = "samsung-i2s",
+	.id = 0,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis0_resource),
 	.resource	  = s5pv210_iis0_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "iis",
+	[1] = "audio-bus",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pv210_cfg_i2s,
+	.type = {
+		.i2s = {
+			.src_clk = rclksrc_v3,
+		},
 	},
 };
 
@@ -94,12 +122,12 @@ static struct resource s5pv210_iis1_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis1 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 1,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis1_resource),
 	.resource	  = s5pv210_iis1_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 
@@ -122,12 +150,12 @@ static struct resource s5pv210_iis2_resource[] = {
 };
 
 struct platform_device s5pv210_device_iis2 = {
-	.name		  = "s3c64xx-iis",
+	.name		  = "samsung-i2s",
 	.id		  = 2,
 	.num_resources	  = ARRAY_SIZE(s5pv210_iis2_resource),
 	.resource	  = s5pv210_iis2_resource,
 	.dev = {
-		.platform_data = &s3c_i2s_pdata,
+		.platform_data = &i2sv3_pdata,
 	},
 };
 

arch/arm/mach-s5pv310/Kconfig

@@ -11,6 +11,7 @@ if ARCH_S5PV310
 
 config CPU_S5PV310
 	bool
+	select S3C_PL330_DMA
 	help
 	  Enable S5PV310 CPU support
 

arch/arm/mach-s5pv310/Makefile

@@ -13,7 +13,7 @@ obj-				:=
 # Core support for S5PV310 system
 
 obj-$(CONFIG_CPU_S5PV310)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o irq-eint.o
+obj-$(CONFIG_CPU_S5PV310)	+= setup-i2c0.o time.o gpiolib.o irq-eint.o dma.o
 
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 obj-$(CONFIG_LOCAL_TIMERS)	+= localtimer.o
@@ -27,6 +27,7 @@ obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 
 # device support
 
+obj-y += dev-audio.o
 obj-$(CONFIG_S5PV310_SETUP_I2C1)	+= setup-i2c1.o
 obj-$(CONFIG_S5PV310_SETUP_I2C2)	+= setup-i2c2.o
 obj-$(CONFIG_S5PV310_SETUP_I2C3)	+= setup-i2c3.o

arch/arm/mach-s5pv310/dev-audio.c

@@ -0,0 +1,364 @@
+/* linux/arch/arm/mach-s5pv310/dev-audio.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co. Ltd
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/audio.h>
+
+#include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+static const char *rclksrc[] = {
+	[0] = "busclk",
+	[1] = "i2sclk",
+};
+
+static int s5pv310_cfg_i2s(struct platform_device *pdev)
+{
+	/* configure GPIO for i2s port */
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2));
+		break;
+	case 1:
+		s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2));
+		break;
+	case 2:
+		s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4));
+		break;
+	default:
+		printk(KERN_ERR "Invalid Device %d\n", pdev->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata i2sv5_pdata = {
+	.cfg_gpio = s5pv310_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
+					 | QUIRK_NEED_RSTCLR,
+			.src_clk = rclksrc,
+		},
+	},
+};
+
+static struct resource s5pv310_i2s0_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_I2S0,
+		.end	= S5PV310_PA_I2S0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S0_TX,
+		.end	= DMACH_I2S0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S0_RX,
+		.end	= DMACH_I2S0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMACH_I2S0S_TX,
+		.end	= DMACH_I2S0S_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_i2s0 = {
+	.name = "samsung-i2s",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(s5pv310_i2s0_resource),
+	.resource = s5pv310_i2s0_resource,
+	.dev = {
+		.platform_data = &i2sv5_pdata,
+	},
+};
+
+static const char *rclksrc_v3[] = {
+	[0] = "sclk_i2s",
+	[1] = "no_such_clock",
+};
+
+static struct s3c_audio_pdata i2sv3_pdata = {
+	.cfg_gpio = s5pv310_cfg_i2s,
+	.type = {
+		.i2s = {
+			.quirks = QUIRK_NO_MUXPSR,
+			.src_clk = rclksrc_v3,
+		},
+	},
+};
+
+static struct resource s5pv310_i2s1_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_I2S1,
+		.end	= S5PV310_PA_I2S1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S1_TX,
+		.end	= DMACH_I2S1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S1_RX,
+		.end	= DMACH_I2S1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_i2s1 = {
+	.name = "samsung-i2s",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(s5pv310_i2s1_resource),
+	.resource = s5pv310_i2s1_resource,
+	.dev = {
+		.platform_data = &i2sv3_pdata,
+	},
+};
+
+static struct resource s5pv310_i2s2_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_I2S2,
+		.end	= S5PV310_PA_I2S2 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_I2S2_TX,
+		.end	= DMACH_I2S2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_I2S2_RX,
+		.end	= DMACH_I2S2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_i2s2 = {
+	.name = "samsung-i2s",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(s5pv310_i2s2_resource),
+	.resource = s5pv310_i2s2_resource,
+	.dev = {
+		.platform_data = &i2sv3_pdata,
+	},
+};
+
+/* PCM Controller platform_devices */
+
+static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3));
+		break;
+	case 1:
+		s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3));
+		break;
+	case 2:
+		s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3));
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct s3c_audio_pdata s3c_pcm_pdata = {
+	.cfg_gpio = s5pv310_pcm_cfg_gpio,
+};
+
+static struct resource s5pv310_pcm0_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PCM0,
+		.end	= S5PV310_PA_PCM0 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM0_TX,
+		.end	= DMACH_PCM0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM0_RX,
+		.end	= DMACH_PCM0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm0 = {
+	.name = "samsung-pcm",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(s5pv310_pcm0_resource),
+	.resource = s5pv310_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv310_pcm1_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PCM1,
+		.end	= S5PV310_PA_PCM1 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM1_TX,
+		.end	= DMACH_PCM1_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM1_RX,
+		.end	= DMACH_PCM1_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm1 = {
+	.name = "samsung-pcm",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(s5pv310_pcm1_resource),
+	.resource = s5pv310_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+static struct resource s5pv310_pcm2_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PCM2,
+		.end	= S5PV310_PA_PCM2 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_PCM2_TX,
+		.end	= DMACH_PCM2_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_PCM2_RX,
+		.end	= DMACH_PCM2_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device s5pv310_device_pcm2 = {
+	.name = "samsung-pcm",
+	.id = 2,
+	.num_resources = ARRAY_SIZE(s5pv310_pcm2_resource),
+	.resource = s5pv310_pcm2_resource,
+	.dev = {
+		.platform_data = &s3c_pcm_pdata,
+	},
+};
+
+/* AC97 Controller platform devices */
+
+static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
+{
+	return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4));
+}
+
+static struct resource s5pv310_ac97_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_AC97,
+		.end	= S5PV310_PA_AC97 + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_AC97_PCMOUT,
+		.end	= DMACH_AC97_PCMOUT,
+		.flags	= IORESOURCE_DMA,
+	},
+	[2] = {
+		.start	= DMACH_AC97_PCMIN,
+		.end	= DMACH_AC97_PCMIN,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		.start	= DMACH_AC97_MICIN,
+		.end	= DMACH_AC97_MICIN,
+		.flags	= IORESOURCE_DMA,
+	},
+	[4] = {
+		.start	= IRQ_AC97,
+		.end	= IRQ_AC97,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_audio_pdata s3c_ac97_pdata = {
+	.cfg_gpio = s5pv310_ac97_cfg_gpio,
+};
+
+static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_ac97 = {
+	.name = "samsung-ac97",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(s5pv310_ac97_resource),
+	.resource = s5pv310_ac97_resource,
+	.dev = {
+		.platform_data = &s3c_ac97_pdata,
+		.dma_mask = &s5pv310_ac97_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s5pv310_spdif_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_SPDIF,
+		.end	= S5PV310_PA_SPDIF + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPDIF,
+		.end	= DMACH_SPDIF,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+	.cfg_gpio = s5pv310_spdif_cfg_gpio,
+};
+
+static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv310_device_spdif = {
+	.name = "samsung-spdif",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(s5pv310_spdif_resource),
+	.resource = s5pv310_spdif_resource,
+	.dev = {
+		.platform_data = &samsung_spdif_pdata,
+		.dma_mask = &s5pv310_spdif_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};

arch/arm/mach-s5pv310/dma.c

@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+
+#include <plat/devs.h>
+#include <plat/irqs.h>
+
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/s3c-pl330-pdata.h>
+
+static u64 dma_dmamask = DMA_BIT_MASK(32);
+
+static struct resource s5pv310_pdma0_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PDMA0,
+		.end	= S5PV310_PA_PDMA0 + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA0,
+		.end	= IRQ_PDMA0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv310_pdma0_pdata = {
+	.peri = {
+		[0] = DMACH_PCM0_RX,
+		[1] = DMACH_PCM0_TX,
+		[2] = DMACH_PCM2_RX,
+		[3] = DMACH_PCM2_TX,
+		[4] = DMACH_MSM_REQ0,
+		[5] = DMACH_MSM_REQ2,
+		[6] = DMACH_SPI0_RX,
+		[7] = DMACH_SPI0_TX,
+		[8] = DMACH_SPI2_RX,
+		[9] = DMACH_SPI2_TX,
+		[10] = DMACH_I2S0S_TX,
+		[11] = DMACH_I2S0_RX,
+		[12] = DMACH_I2S0_TX,
+		[13] = DMACH_I2S2_RX,
+		[14] = DMACH_I2S2_TX,
+		[15] = DMACH_UART0_RX,
+		[16] = DMACH_UART0_TX,
+		[17] = DMACH_UART2_RX,
+		[18] = DMACH_UART2_TX,
+		[19] = DMACH_UART4_RX,
+		[20] = DMACH_UART4_TX,
+		[21] = DMACH_SLIMBUS0_RX,
+		[22] = DMACH_SLIMBUS0_TX,
+		[23] = DMACH_SLIMBUS2_RX,
+		[24] = DMACH_SLIMBUS2_TX,
+		[25] = DMACH_SLIMBUS4_RX,
+		[26] = DMACH_SLIMBUS4_TX,
+		[27] = DMACH_AC97_MICIN,
+		[28] = DMACH_AC97_PCMIN,
+		[29] = DMACH_AC97_PCMOUT,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv310_device_pdma0 = {
+	.name		= "s3c-pl330",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s5pv310_pdma0_resource),
+	.resource	= s5pv310_pdma0_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv310_pdma0_pdata,
+	},
+};
+
+static struct resource s5pv310_pdma1_resource[] = {
+	[0] = {
+		.start	= S5PV310_PA_PDMA1,
+		.end	= S5PV310_PA_PDMA1 + SZ_4K,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PDMA1,
+		.end	= IRQ_PDMA1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct s3c_pl330_platdata s5pv310_pdma1_pdata = {
+	.peri = {
+		[0] = DMACH_PCM0_RX,
+		[1] = DMACH_PCM0_TX,
+		[2] = DMACH_PCM1_RX,
+		[3] = DMACH_PCM1_TX,
+		[4] = DMACH_MSM_REQ1,
+		[5] = DMACH_MSM_REQ3,
+		[6] = DMACH_SPI1_RX,
+		[7] = DMACH_SPI1_TX,
+		[8] = DMACH_I2S0S_TX,
+		[9] = DMACH_I2S0_RX,
+		[10] = DMACH_I2S0_TX,
+		[11] = DMACH_I2S1_RX,
+		[12] = DMACH_I2S1_TX,
+		[13] = DMACH_UART0_RX,
+		[14] = DMACH_UART0_TX,
+		[15] = DMACH_UART1_RX,
+		[16] = DMACH_UART1_TX,
+		[17] = DMACH_UART3_RX,
+		[18] = DMACH_UART3_TX,
+		[19] = DMACH_SLIMBUS1_RX,
+		[20] = DMACH_SLIMBUS1_TX,
+		[21] = DMACH_SLIMBUS3_RX,
+		[22] = DMACH_SLIMBUS3_TX,
+		[23] = DMACH_SLIMBUS5_RX,
+		[24] = DMACH_SLIMBUS5_TX,
+		[25] = DMACH_SLIMBUS0AUX_RX,
+		[26] = DMACH_SLIMBUS0AUX_TX,
+		[27] = DMACH_SPDIF,
+		[28] = DMACH_MAX,
+		[29] = DMACH_MAX,
+		[30] = DMACH_MAX,
+		[31] = DMACH_MAX,
+	},
+};
+
+static struct platform_device s5pv310_device_pdma1 = {
+	.name		= "s3c-pl330",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(s5pv310_pdma1_resource),
+	.resource	= s5pv310_pdma1_resource,
+	.dev		= {
+		.dma_mask = &dma_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+		.platform_data = &s5pv310_pdma1_pdata,
+	},
+};
+
+static struct platform_device *s5pv310_dmacs[] __initdata = {
+	&s5pv310_device_pdma0,
+	&s5pv310_device_pdma1,
+};
+
+static int __init s5pv310_dma_init(void)
+{
+	platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs));
+
+	return 0;
+}
+arch_initcall(s5pv310_dma_init);

arch/arm/mach-s5pv310/include/mach/dma.h

@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2010 Samsung Electronics Co. Ltd.
+ *	Jaswinder Singh <jassi.brar@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MACH_DMA_H
+#define __MACH_DMA_H
+
+/* This platform uses the common S3C DMA API driver for PL330 */
+#include <plat/s3c-dma-pl330.h>
+
+#endif /* __MACH_DMA_H */

arch/arm/mach-s5pv310/include/mach/irqs.h

@@ -54,6 +54,9 @@
 #define COMBINER_GROUP(x)	((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64))
 #define COMBINER_IRQ(x, y)	(COMBINER_GROUP(x) + y)
 
+#define IRQ_PDMA0		COMBINER_IRQ(21, 0)
+#define IRQ_PDMA1		COMBINER_IRQ(21, 1)
+
 #define IRQ_TIMER0_VIC		COMBINER_IRQ(22, 0)
 #define IRQ_TIMER1_VIC		COMBINER_IRQ(22, 1)
 #define IRQ_TIMER2_VIC		COMBINER_IRQ(22, 2)

arch/arm/mach-s5pv310/include/mach/map.h

@@ -52,6 +52,11 @@
 #define S5PV310_PA_GIC_DIST		(0x10501000)
 #define S5PV310_PA_L2CC			(0x10502000)
 
+/* DMA */
+#define S5PV310_PA_MDMA		0x10810000
+#define S5PV310_PA_PDMA0	0x12680000
+#define S5PV310_PA_PDMA1	0x12690000
+
 #define S5PV310_PA_GPIO1		(0x11400000)
 #define S5PV310_PA_GPIO2		(0x11000000)
 #define S5PV310_PA_GPIO3		(0x03860000)
@@ -60,6 +65,22 @@
 
 #define S5PV310_PA_SROMC		(0x12570000)
 
+/* S/PDIF */
+#define S5PV310_PA_SPDIF	0xE1100000
+
+/* I2S */
+#define S5PV310_PA_I2S0		0x03830000
+#define S5PV310_PA_I2S1		0xE3100000
+#define S5PV310_PA_I2S2		0xE2A00000
+
+/* PCM */
+#define S5PV310_PA_PCM0		0x03840000
+#define S5PV310_PA_PCM1		0x13980000
+#define S5PV310_PA_PCM2		0x13990000
+
+/* AC97 */
+#define S5PV310_PA_AC97		0x139A0000
+
 #define S5PV310_PA_UART			(0x13800000)
 
 #define S5P_PA_UART(x)			(S5PV310_PA_UART + ((x) * S3C_UART_OFFSET))

arch/arm/mach-shmobile/Kconfig

@@ -116,4 +116,6 @@ endmenu
 config SH_CLK_CPG
 	bool
 
+source "drivers/sh/Kconfig"
+
 endif

arch/arm/mach-shmobile/board-ap4evb.c

@@ -163,11 +163,13 @@ static struct mtd_partition nor_flash_partitions[] = {
 		.name		= "loader",
 		.offset		= 0x00000000,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "bootenv",
 		.offset		= MTDPART_OFS_APPEND,
 		.size		= 512 * 1024,
+		.mask_flags	= MTD_WRITEABLE,
 	},
 	{
 		.name		= "kernel_ro",
@@ -565,12 +567,54 @@ static struct platform_device *qhd_devices[] __initdata = {
 
 /* FSI */
 #define IRQ_FSI		evt2irq(0x1840)
+
+static int fsi_set_rate(int is_porta, int rate)
+{
+	struct clk *fsib_clk;
+	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	int ret;
+
+	/* set_rate is not needed if port A */
+	if (is_porta)
+		return 0;
+
+	fsib_clk = clk_get(NULL, "fsib_clk");
+	if (IS_ERR(fsib_clk))
+		return -EINVAL;
+
+	switch (rate) {
+	case 44100:
+		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 11283000));
+		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	case 48000:
+		clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000));
+		clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000));
+		ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64;
+		break;
+	default:
+		pr_err("unsupported rate in FSI2 port B\n");
+		ret = -EINVAL;
+		break;
+	}
+
+	clk_put(fsib_clk);
+
+	return ret;
+}
+
 static struct sh_fsi_platform_info fsi_info = {
 	.porta_flags = SH_FSI_BRS_INV |
 		       SH_FSI_OUT_SLAVE_MODE |
 		       SH_FSI_IN_SLAVE_MODE |
 		       SH_FSI_OFMT(PCM) |
 		       SH_FSI_IFMT(PCM),
+
+	.portb_flags = SH_FSI_BRS_INV |
+		       SH_FSI_BRM_INV |
+		       SH_FSI_LRS_INV |
+		       SH_FSI_OFMT(SPDIF),
+	.set_rate = fsi_set_rate,
 };
 
 static struct resource fsi_resources[] = {
@@ -634,6 +678,7 @@ static struct platform_device lcdc1_device = {
 static struct sh_mobile_hdmi_info hdmi_info = {
 	.lcd_chan = &sh_mobile_lcdc1_info.ch[0],
 	.lcd_dev = &lcdc1_device.dev,
+	.flags = HDMI_SND_SRC_SPDIF,
 };
 
 static struct resource hdmi_resources[] = {
@@ -992,6 +1037,7 @@ static void __init ap4evb_map_io(void)
 
 #define GPIO_PORT9CR	0xE6051009
 #define GPIO_PORT10CR	0xE605100A
+#define USCCR1		0xE6058144
 static void __init ap4evb_init(void)
 {
 	u32 srcr4;
@@ -1062,7 +1108,7 @@ static void __init ap4evb_init(void)
 	/* setup USB phy */
 	__raw_writew(0x8a0a, 0xE6058130);	/* USBCR2 */
 
-	/* enable FSI2 */
+	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
 	gpio_request(GPIO_FN_FSIAISLD,	NULL);
@@ -1079,6 +1125,10 @@ static void __init ap4evb_init(void)
 	gpio_request(GPIO_PORT41, NULL);
 	gpio_direction_input(GPIO_PORT41);
 
+	/* setup FSI2 port B (HDMI) */
+	gpio_request(GPIO_FN_FSIBCK, NULL);
+	__raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */
+
 	/* set SPU2 clock to 119.6 MHz */
 	clk = clk_get(NULL, "spu_clk");
 	if (!IS_ERR(clk)) {

arch/arm/mach-shmobile/clock-sh7372.c

@@ -50,6 +50,9 @@
 #define SMSTPCR3	0xe615013c
 #define SMSTPCR4	0xe6150140
 
+#define FSIDIVA		0xFE1F8000
+#define FSIDIVB		0xFE1F8008
+
 /* Platforms must set frequency on their DV_CLKI pin */
 struct clk sh7372_dv_clki_clk = {
 };
@@ -288,6 +291,7 @@ struct clk sh7372_pllc2_clk = {
 	.ops		= &pllc2_clk_ops,
 	.parent		= &extal1_div2_clk,
 	.freq_table	= pllc2_freq_table,
+	.nr_freqs	= ARRAY_SIZE(pllc2_freq_table) - 1,
 	.parent_table	= pllc2_parent,
 	.parent_num	= ARRAY_SIZE(pllc2_parent),
 };
@@ -417,6 +421,101 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 				      fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2),
 };
 
+/* FSI DIV */
+static unsigned long fsidiv_recalc(struct clk *clk)
+{
+	unsigned long value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	if ((value & 0x3) != 0x3)
+		return 0;
+
+	value >>= 16;
+	if (value < 2)
+		return 0;
+
+	return clk->parent->rate / value;
+}
+
+static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_div_range_round(clk, 2, 0xffff, rate);
+}
+
+static void fsidiv_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->mapping->base);
+}
+
+static int fsidiv_enable(struct clk *clk)
+{
+	unsigned long value;
+
+	value  = __raw_readl(clk->mapping->base) >> 16;
+	if (value < 2) {
+		fsidiv_disable(clk);
+		return -ENOENT;
+	}
+
+	__raw_writel((value << 16) | 0x3, clk->mapping->base);
+
+	return 0;
+}
+
+static int fsidiv_set_rate(struct clk *clk,
+			   unsigned long rate, int algo_id)
+{
+	int idx;
+
+	if (clk->parent->rate == rate) {
+		fsidiv_disable(clk);
+		return 0;
+	}
+
+	idx = (clk->parent->rate / rate) & 0xffff;
+	if (idx < 2)
+		return -ENOENT;
+
+	__raw_writel(idx << 16, clk->mapping->base);
+	return fsidiv_enable(clk);
+}
+
+static struct clk_ops fsidiv_clk_ops = {
+	.recalc		= fsidiv_recalc,
+	.round_rate	= fsidiv_round_rate,
+	.set_rate	= fsidiv_set_rate,
+	.enable		= fsidiv_enable,
+	.disable	= fsidiv_disable,
+};
+
+static struct clk_mapping sh7372_fsidiva_clk_mapping = {
+	.phys	= FSIDIVA,
+	.len	= 8,
+};
+
+struct clk sh7372_fsidiva_clk = {
+	.ops		= &fsidiv_clk_ops,
+	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
+	.mapping	= &sh7372_fsidiva_clk_mapping,
+};
+
+static struct clk_mapping sh7372_fsidivb_clk_mapping = {
+	.phys	= FSIDIVB,
+	.len	= 8,
+};
+
+struct clk sh7372_fsidivb_clk = {
+	.ops		= &fsidiv_clk_ops,
+	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
+	.mapping	= &sh7372_fsidivb_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&sh7372_fsidiva_clk,
+	&sh7372_fsidivb_clk,
+};
+
 enum { MSTP001,
        MSTP131, MSTP130,
        MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
@@ -585,6 +684,9 @@ void __init sh7372_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)

arch/arm/mach-shmobile/include/mach/gpio.h

@@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	return -ENOSYS;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned int irq)
 {
-	return -EINVAL;
+	return -ENOSYS;
 }
 
 #endif /* CONFIG_GPIOLIB */

arch/arm/mach-shmobile/include/mach/sh7372.h

@@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk;
 extern struct clk sh7372_pllc2_clk;
 extern struct clk sh7372_fsiack_clk;
 extern struct clk sh7372_fsibck_clk;
+extern struct clk sh7372_fsidiva_clk;
+extern struct clk sh7372_fsidivb_clk;
 
 #endif /* __ASM_SH7372_H__ */

arch/arm/mach-shmobile/intc-sh7372.c

@@ -98,7 +98,7 @@ static struct intc_vect intca_vectors[] __initdata = {
 	INTC_VECT(IRQ14A, 0x03c0), INTC_VECT(IRQ15A, 0x03e0),
 	INTC_VECT(IRQ16A, 0x3200), INTC_VECT(IRQ17A, 0x3220),
 	INTC_VECT(IRQ18A, 0x3240), INTC_VECT(IRQ19A, 0x3260),
-	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ31A, 0x32a0),
+	INTC_VECT(IRQ20A, 0x3280), INTC_VECT(IRQ21A, 0x32a0),
 	INTC_VECT(IRQ22A, 0x32c0), INTC_VECT(IRQ23A, 0x32e0),
 	INTC_VECT(IRQ24A, 0x3300), INTC_VECT(IRQ25A, 0x3320),
 	INTC_VECT(IRQ26A, 0x3340), INTC_VECT(IRQ27A, 0x3360),

arch/arm/mach-vexpress/ct-ca9x4.c

@@ -54,7 +54,9 @@ static struct map_desc ct_ca9x4_io_desc[] __initdata = {
 
 static void __init ct_ca9x4_map_io(void)
 {
+#ifdef CONFIG_LOCAL_TIMERS
 	twd_base = MMIO_P2V(A9_MPCORE_TWD);
+#endif
 	v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
 }
 

arch/arm/mm/dma-mapping.c

@@ -198,7 +198,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
 	 * fragmentation of the DMA space, and also prevents allocations
 	 * smaller than a section from crossing a section boundary.
 	 */
-	bit = fls(size - 1) + 1;
+	bit = fls(size - 1);
 	if (bit > SECTION_SHIFT)
 		bit = SECTION_SHIFT;
 	align = 1 << bit;

arch/arm/plat-omap/devices.c

@@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	paddr = memblock_alloc(size, SZ_1M);
 	if (!paddr) {
 		pr_err("%s: failed to reserve %x bytes\n",
 				__func__, size);
 		return;
 	}
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
 
 	omap_dsp_phys_mempool_base = paddr;
 }

arch/arm/plat-omap/dma.c

@@ -1983,6 +1983,8 @@ static int omap2_dma_handle_ch(int ch)
 
 	dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(ch));
 	dma_write(1 << ch, IRQSTATUS_L0);
+	/* read back the register to flush the write */
+	dma_read(IRQSTATUS_L0);
 
 	/* If the ch is not chained then chain_id will be -1 */
 	if (dma_chan[ch].chain_id != -1) {

arch/arm/plat-orion/include/plat/pcie.h

@@ -11,12 +11,15 @@
 #ifndef __PLAT_PCIE_H
 #define __PLAT_PCIE_H
 
+struct pci_bus;
+
 u32 orion_pcie_dev_id(void __iomem *base);
 u32 orion_pcie_rev(void __iomem *base);
 int orion_pcie_link_up(void __iomem *base);
 int orion_pcie_x4_mode(void __iomem *base);
 int orion_pcie_get_local_bus_nr(void __iomem *base);
 void orion_pcie_set_local_bus_nr(void __iomem *base, int nr);
+void orion_pcie_reset(void __iomem *base);
 void orion_pcie_setup(void __iomem *base,
 		      struct mbus_dram_target_info *dram);
 int orion_pcie_rd_conf(void __iomem *base, struct pci_bus *bus,

arch/arm/plat-orion/pcie.c

@@ -181,11 +181,6 @@ void __init orion_pcie_setup(void __iomem *base,
 	u16 cmd;
 	u32 mask;
 
-	/*
-	 * soft reset PCIe unit
-	 */
-	orion_pcie_reset(base);
-
 	/*
 	 * Point PCIe unit MBUS decode windows to DRAM space.
 	 */

arch/arm/plat-samsung/include/plat/audio.h

@@ -25,10 +25,34 @@ extern void s3c64xx_ac97_setup_gpio(int);
 #define S5PC100_SPDIF_GPG3 1
 extern void s5pc100_spdif_setup_gpio(int);
 
+struct samsung_i2s {
+/* If the Primary DAI has 5.1 Channels */
+#define QUIRK_PRI_6CHAN		(1 << 0)
+/* If the I2S block has a Stereo Overlay Channel */
+#define QUIRK_SEC_DAI		(1 << 1)
+/*
+ * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit)
+ * The Machine driver must provide suitably set clock to the I2S block.
+ */
+#define QUIRK_NO_MUXPSR		(1 << 2)
+#define QUIRK_NEED_RSTCLR	(1 << 3)
+	/* Quirks of the I2S controller */
+	u32 quirks;
+
+	/*
+	 * Array of clock names that can be used to generate I2S signals.
+	 * Also corresponds to clocks of I2SMOD[10]
+	 */
+	const char **src_clk;
+};
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
  */
 struct s3c_audio_pdata {
 	int (*cfg_gpio)(struct platform_device *);
+	union {
+		struct samsung_i2s i2s;
+	} type;
 };

arch/arm/plat-samsung/include/plat/devs.h

@@ -96,6 +96,15 @@ extern struct platform_device s5pv210_device_iis1;
 extern struct platform_device s5pv210_device_iis2;
 extern struct platform_device s5pv210_device_spdif;
 
+extern struct platform_device s5pv310_device_ac97;
+extern struct platform_device s5pv310_device_pcm0;
+extern struct platform_device s5pv310_device_pcm1;
+extern struct platform_device s5pv310_device_pcm2;
+extern struct platform_device s5pv310_device_i2s0;
+extern struct platform_device s5pv310_device_i2s1;
+extern struct platform_device s5pv310_device_i2s2;
+extern struct platform_device s5pv310_device_spdif;
+
 extern struct platform_device s5p6442_device_pcm0;
 extern struct platform_device s5p6442_device_pcm1;
 extern struct platform_device s5p6442_device_iis0;

arch/m68k/include/asm/irqflags.h

@@ -2,7 +2,9 @@
 #define _M68K_IRQFLAGS_H
 
 #include <linux/types.h>
+#ifdef CONFIG_MMU
 #include <linux/hardirq.h>
+#endif
 #include <linux/preempt.h>
 #include <asm/thread_info.h>
 #include <asm/entry.h>

arch/m68k/include/asm/machdep.h

@@ -40,5 +40,6 @@ extern unsigned long hw_timer_offset(void);
 extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
 
 extern void config_BSP(char *command, int len);
+extern void do_IRQ(int irq, struct pt_regs *fp);
 
 #endif /* _M68K_MACHDEP_H */

arch/powerpc/kernel/kvm.c

@@ -127,7 +127,7 @@ static void kvm_patch_ins_nop(u32 *inst)
 
 static void kvm_patch_ins_b(u32 *inst, int addr)
 {
-#ifdef CONFIG_RELOCATABLE
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC_BOOK3S)
 	/* On relocatable kernels interrupts handlers and our code
 	   can be in different regions, so we don't patch them */
 

arch/powerpc/kvm/booke_interrupts.S

@@ -416,7 +416,7 @@ lightweight_exit:
 	lwz	r3, VCPU_PC(r4)
 	mtsrr0	r3
 	lwz	r3, VCPU_SHARED(r4)
-	lwz	r3, VCPU_SHARED_MSR(r3)
+	lwz	r3, (VCPU_SHARED_MSR + 4)(r3)
 	oris	r3, r3, KVMPPC_MSR_MASK@h
 	ori	r3, r3, KVMPPC_MSR_MASK@l
 	mtsrr1	r3

arch/powerpc/kvm/e500.c

@@ -138,8 +138,8 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu)
 	struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
 
 	free_page((unsigned long)vcpu->arch.shared);
-	kvmppc_e500_tlb_uninit(vcpu_e500);
 	kvm_vcpu_uninit(vcpu);
+	kvmppc_e500_tlb_uninit(vcpu_e500);
 	kmem_cache_free(kvm_vcpu_cache, vcpu_e500);
 }
 

arch/powerpc/kvm/powerpc.c

@@ -617,6 +617,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
 	switch (ioctl) {
 	case KVM_PPC_GET_PVINFO: {
 		struct kvm_ppc_pvinfo pvinfo;
+		memset(&pvinfo, 0, sizeof(pvinfo));
 		r = kvm_vm_ioctl_get_pvinfo(&pvinfo);
 		if (copy_to_user(argp, &pvinfo, sizeof(pvinfo))) {
 			r = -EFAULT;

arch/powerpc/kvm/timing.c

@@ -35,7 +35,6 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu)
 	int i;
 
 	/* pause guest execution to avoid concurrent updates */
-	local_irq_disable();
 	mutex_lock(&vcpu->mutex);
 
 	vcpu->arch.last_exit_type = 0xDEAD;
@@ -51,7 +50,6 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu)
 	vcpu->arch.timing_last_enter.tv64 = 0;
 
 	mutex_unlock(&vcpu->mutex);
-	local_irq_enable();
 }
 
 static void add_exit_timing(struct kvm_vcpu *vcpu, u64 duration, int type)

arch/sh/Kconfig

@@ -193,6 +193,7 @@ config CPU_SH2
 config CPU_SH2A
 	bool
 	select CPU_SH2
+	select UNCACHED_MAPPING
 
 config CPU_SH3
 	bool

arch/sh/Makefile

@@ -133,10 +133,7 @@ machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
 machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
 machdir-$(CONFIG_SH_SH03)			+= mach-sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
 machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
-machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
 machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
 machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
 machdir-$(CONFIG_SH_AP325RXA)			+= mach-ap325rxa

arch/sh/boards/Kconfig

@@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE
 	  Select 7343 SolutionEngine if configuring for a Hitachi
 	  SH7343 (SH-Mobile 3AS) evaluation board.
 
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
 config SH_HP6XX
 	bool "HP6XX"
 	select SYS_SUPPORTS_APM_EMULATION

arch/sh/boards/Makefile

@@ -2,10 +2,12 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SECUREEDGE5410)	+= board-secureedge5410.o
 obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7705)	+= board-edosk7705.o
 obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o

arch/sh/boards/board-edosk7705.c

@@ -0,0 +1,78 @@
+/*
+ * arch/sh/boards/renesas/edosk7705/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for edosk7705 development
+ * board by S. Dunn, 2003.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/sizes.h>
+
+#define SMC_IOBASE	0xA2000000
+#define SMC_IO_OFFSET	0x300
+#define SMC_IOADDR	(SMC_IOBASE + SMC_IO_OFFSET)
+
+#define ETHERNET_IRQ	0x09
+
+static void __init sh_edosk7705_init_irq(void)
+{
+	make_imask_irq(ETHERNET_IRQ);
+}
+
+/* eth initialization functions */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static struct resource smc91x_res[] = {
+	[0] = {
+		.start	= SMC_IOADDR,
+		.end	= SMC_IOADDR + SZ_32 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= ETHERNET_IRQ,
+		.end	= ETHERNET_IRQ,
+		.flags	= IORESOURCE_IRQ ,
+	}
+};
+
+static struct platform_device smc91x_dev = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_res),
+	.resource	= smc91x_res,
+
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* platform init code */
+static struct platform_device *edosk7705_devices[] __initdata = {
+	&smc91x_dev,
+};
+
+static int __init init_edosk7705_devices(void)
+{
+	return platform_add_devices(edosk7705_devices,
+				    ARRAY_SIZE(edosk7705_devices));
+}
+__initcall(init_edosk7705_devices);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_edosk7705 __initmv = {
+	.mv_name		= "EDOSK7705",
+	.mv_nr_irqs		= 80,
+	.mv_init_irq		= sh_edosk7705_init_irq,
+};

arch/sh/boards/mach-snapgear/setup.c → arch/sh/boards/board-secureedge5410.c

@@ -1,6 +1,4 @@
 /*
- * linux/arch/sh/boards/snapgear/setup.c
- *
  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
  * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
  *
@@ -19,18 +17,19 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <asm/machvec.h>
-#include <mach/snapgear.h>
+#include <mach/secureedge5410.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <cpu/timer.h>
 
+unsigned short secureedge5410_ioport;
+
 /*
  * EraseConfig handling functions
  */
-
 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 {
-	(void)__raw_readb(0xb8000000);	/* dummy read */
+	ctrl_delay();	/* dummy read */
 
 	printk("SnapGear: erase switch interrupt!\n");
 
@@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
 
 static int __init eraseconfig_init(void)
 {
+	unsigned int irq = evt2irq(0x240);
+
 	printk("SnapGear: EraseConfig init\n");
+
 	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+	if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED,
 				"Erase Config", NULL))
 		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
+				irq);
 	else
 		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
+				irq);
+	return 0;
 }
-
 module_init(eraseconfig_init);
 
-/****************************************************************************/
 /*
  * Initialize IRQ setting
  *
@@ -62,7 +62,6 @@ module_init(eraseconfig_init);
  * IRL2 = eth1
  * IRL3 = crypto
  */
-
 static void __init init_snapgear_IRQ(void)
 {
 	printk("Setup SnapGear IRQ/IPR ...\n");
@@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void)
 static struct sh_machine_vector mv_snapgear __initmv = {
 	.mv_name		= "SnapGear SecureEdge5410",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
 	.mv_init_irq		= init_snapgear_IRQ,
 };

arch/sh/boards/mach-edosk7705/Makefile

@@ -1,5 +0,0 @@
-#
-# Makefile for the EDOSK7705 specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o

arch/sh/boards/mach-edosk7705/io.c

@@ -1,71 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/io.c
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routines for Hitachi EDOSK7705 board.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <mach/edosk7705.h>
-#include <asm/addrspace.h>
-
-#define SMC_IOADDR	0xA2000000
-
-/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */
-static unsigned long sh_edosk7705_isa_port2addr(unsigned long port)
-{
-	/*
-	 * SMC91C96 registers are 4 byte aligned rather than the
-	 * usual 2 byte!
-	 */
-	if (port >= 0x300 && port < 0x320)
-		return SMC_IOADDR + ((port - 0x300) * 2);
-
-	maybebadio(port);
-	return port;
-}
-
-/* Trying to read / write bytes on odd-byte boundaries to the Ethernet
- * registers causes problems. So we bit-shift the value and read / write
- * in 2 byte chunks. Setting the low byte to 0 does not cause problems
- * now as odd byte writes are only made on the bit mask / interrupt
- * register. This may not be the case in future Mar-2003 SJD
- */
-unsigned char sh_edosk7705_inb(unsigned long port)
-{
-	if (port >= 0x300 && port < 0x320 && port & 0x01)
-		return __raw_readw(port - 1) >> 8;
-
-	return __raw_readb(sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_outb(unsigned char value, unsigned long port)
-{
-	if (port >= 0x300 && port < 0x320 && port & 0x01) {
-		__raw_writew(((unsigned short)value << 8), port - 1);
-		return;
-	}
-
-	__raw_writeb(value, sh_edosk7705_isa_port2addr(port));
-}
-
-void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *p = addr;
-
-	while (count--)
-		*p++ = sh_edosk7705_inb(port);
-}
-
-void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *p = (unsigned char *)addr;
-
-	while (count--)
-		sh_edosk7705_outb(*p++, port);
-}

arch/sh/boards/mach-edosk7705/setup.c

@@ -1,36 +0,0 @@
-/*
- * arch/sh/boards/renesas/edosk7705/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for edosk7705 development
- * board by S. Dunn, 2003.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <mach/edosk7705.h>
-
-static void __init sh_edosk7705_init_irq(void)
-{
-	/* This is the Ethernet interrupt */
-	make_imask_irq(0x09);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_edosk7705 __initmv = {
-	.mv_name		= "EDOSK7705",
-	.mv_nr_irqs		= 80,
-
-	.mv_inb			= sh_edosk7705_inb,
-	.mv_outb		= sh_edosk7705_outb,
-
-	.mv_insb		= sh_edosk7705_insb,
-	.mv_outsb		= sh_edosk7705_outsb,
-
-	.mv_init_irq		= sh_edosk7705_init_irq,
-};

arch/sh/boards/mach-microdev/io.c

@@ -54,7 +54,7 @@
 /*
  * map I/O ports to memory-mapped addresses
  */
-static unsigned long microdev_isa_port2addr(unsigned long offset)
+void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len)
 {
 	unsigned long result;
 
@@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 			 *	Configuration Registers
 			 */
 		result = IO_SUPERIO_PHYS + (offset << 1);
-#if 0
-	} else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG ||
-		   offset == KBD_STATUS_REG) {
-			/*
-			 *	SMSC FDC37C93xAPM SuperIO chip
-			 *
-			 *	PS/2 Keyboard + Mouse (ports 0x60 and 0x64).
-			 */
-	        result = IO_SUPERIO_PHYS + (offset << 1);
-#endif
 	} else if (((offset >= IO_IDE1_BASE) &&
 		    (offset <  IO_IDE1_BASE + IO_IDE_EXTENT)) ||
 		    (offset == IO_IDE1_MISC)) {
@@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset)
 		result = PVR;
 	}
 
-	return result;
-}
-
-#define PORT2ADDR(x) (microdev_isa_port2addr(x))
-
-static inline void delay(void)
-{
-#if defined(CONFIG_PCI)
-	/* System board present, just make a dummy SRAM access.  (CS0 will be
-	   mapped to PCI memory, probably good to avoid it.) */
-	__raw_readw(0xa6800000);
-#else
-	/* CS0 will be mapped to flash, ROM etc so safe to access it. */
-	__raw_readw(0xa0000000);
-#endif
-}
-
-unsigned char microdev_inb(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inb(port);
-#endif
-	return *(volatile unsigned char*)PORT2ADDR(port);
-}
-
-unsigned short microdev_inw(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inw(port);
-#endif
-	return *(volatile unsigned short*)PORT2ADDR(port);
-}
-
-unsigned int microdev_inl(unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO)
-		return microdev_pci_inl(port);
-#endif
-	return *(volatile unsigned int*)PORT2ADDR(port);
-}
-
-void microdev_outw(unsigned short b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outw(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned short*)PORT2ADDR(port) = b;
-}
-
-void microdev_outb(unsigned char b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outb(b, port);
-		return;
-	}
-#endif
-
-	/*
-	 *	There is a board feature with the current SH4-202 MicroDev in
-	 *	that the 2 byte enables (nBE0 and nBE1) are tied together (and
-	 *	to the Chip Select Line (Ethernet_CS)). Due to this connectivity,
-	 *	it is not possible to safely perform 8-bit writes to the
-	 *	Ethernet registers, as 16-bits will be consumed from the Data
-	 *	lines (corrupting the other byte).  Hence, this function is
-	 *	written to implement 16-bit read/modify/write for all byte-wide
-	 *	accesses.
-	 *
-	 *	Note: there is no problem with byte READS (even or odd).
-	 *
-	 *			Sean McGoogan - 16th June 2003.
-	 */
-	if ((port >= IO_LAN91C111_BASE) &&
-	    (port <  IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) {
-			/*
-			 * Then are trying to perform a byte-write to the
-			 * LAN91C111.  This needs special care.
-			 */
-		if (port % 2 == 1) {	/* is the port odd ? */
-			/* unset bit-0, i.e. make even */
-			const unsigned long evenPort = port-1;
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving even byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(evenPort);
-			word = (word & 0xffu) | (b << 8);
-			microdev_outw(word, evenPort);
-		} else {
-			/* else, we are trying to do an even byte write */
-			unsigned short word;
-
-			/*
-			 * do a 16-bit read/write to write to 'port',
-			 * preserving odd byte.
-			 *
-			 *	Even addresses are bits 0-7
-			 *	Odd  addresses are bits 8-15
-			 */
-			word = microdev_inw(port);
-			word = (word & 0xff00u) | (b);
-			microdev_outw(word, port);
-		}
-	} else {
-		*(volatile unsigned char*)PORT2ADDR(port) = b;
-	}
-}
-
-void microdev_outl(unsigned int b, unsigned long port)
-{
-#ifdef CONFIG_PCI
-	if (port >= PCIBIOS_MIN_IO) {
-		microdev_pci_outl(b, port);
-		return;
-	}
-#endif
-	*(volatile unsigned int*)PORT2ADDR(port) = b;
-}
-
-unsigned char microdev_inb_p(unsigned long port)
-{
-	unsigned char v = microdev_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short microdev_inw_p(unsigned long port)
-{
-	unsigned short v = microdev_inw(port);
-	delay();
-	return v;
-}
-
-unsigned int microdev_inl_p(unsigned long port)
-{
-	unsigned int v = microdev_inl(port);
-	delay();
-	return v;
-}
-
-void microdev_outb_p(unsigned char b, unsigned long port)
-{
-	microdev_outb(b, port);
-	delay();
-}
-
-void microdev_outw_p(unsigned short b, unsigned long port)
-{
-	microdev_outw(b, port);
-	delay();
-}
-
-void microdev_outl_p(unsigned int b, unsigned long port)
-{
-	microdev_outl(b, port);
-	delay();
-}
-
-void microdev_insb(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insw(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_insl(unsigned long port, void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*buf++ = *port_addr;
-}
-
-void microdev_outsb(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned char *port_addr;
-	const unsigned char *buf = buffer;
-
-	port_addr = (volatile unsigned char *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsw(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned short *port_addr;
-	const unsigned short *buf = buffer;
-
-	port_addr = (volatile unsigned short *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
-}
-
-void microdev_outsl(unsigned long port, const void *buffer, unsigned long count)
-{
-	volatile unsigned long *port_addr;
-	const unsigned int *buf = buffer;
-
-	port_addr = (volatile unsigned long *)PORT2ADDR(port);
-
-	while (count--)
-		*port_addr = *buf++;
+	return (void __iomem *)result;
 }

arch/sh/boards/mach-microdev/setup.c

@@ -195,27 +195,6 @@ device_initcall(microdev_devices_setup);
 static struct sh_machine_vector mv_sh4202_microdev __initmv = {
 	.mv_name		= "SH4-202 MicroDev",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= microdev_inb,
-	.mv_inw			= microdev_inw,
-	.mv_inl			= microdev_inl,
-	.mv_outb		= microdev_outb,
-	.mv_outw		= microdev_outw,
-	.mv_outl		= microdev_outl,
-
-	.mv_inb_p		= microdev_inb_p,
-	.mv_inw_p		= microdev_inw_p,
-	.mv_inl_p		= microdev_inl_p,
-	.mv_outb_p		= microdev_outb_p,
-	.mv_outw_p		= microdev_outw_p,
-	.mv_outl_p		= microdev_outl_p,
-
-	.mv_insb		= microdev_insb,
-	.mv_insw		= microdev_insw,
-	.mv_insl		= microdev_insl,
-	.mv_outsb		= microdev_outsb,
-	.mv_outsw		= microdev_outsw,
-	.mv_outsl		= microdev_outsl,
-
+	.mv_ioport_map		= microdev_ioport_map,
 	.mv_init_irq		= init_microdev_irq,
 };

arch/sh/boards/mach-se/7206/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the 7206 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o

arch/sh/boards/mach-se/7206/io.c

@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7206.h>
-
-
-static inline void delay(void)
-{
-	__raw_readw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000 && port < 0x2020)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 && port < 0x310)
-		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-	return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-	return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	v = (*port2adr(port)) & 0xff;
-	delay();
-	return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-	return *port2adr(port);
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-	delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-	*port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}

arch/sh/boards/mach-se/7206/irq.c

@@ -139,11 +139,13 @@ void __init init_se7206_IRQ(void)
 	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
 	make_se7206_irq(IRQ1_IRQ); /* ATA */
 	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	__raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */
 
 	/* FPGA System register setup*/
 	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
 	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
 	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
 	__raw_writew(0x0001,INTSEL);
 }

arch/sh/boards/mach-se/7206/setup.c

@@ -86,20 +86,5 @@ __initcall(se7206_devices_setup);
 static struct sh_machine_vector mv_se __initmv = {
 	.mv_name		= "SolutionEngine",
 	.mv_nr_irqs		= 256,
-	.mv_inb			= se7206_inb,
-	.mv_inw			= se7206_inw,
-	.mv_outb		= se7206_outb,
-	.mv_outw		= se7206_outw,
-
-	.mv_inb_p		= se7206_inb_p,
-	.mv_inw_p		= se7206_inw,
-	.mv_outb_p		= se7206_outb_p,
-	.mv_outw_p		= se7206_outw,
-
-	.mv_insb		= se7206_insb,
-	.mv_insw		= se7206_insw,
-	.mv_outsb		= se7206_outsb,
-	.mv_outsw		= se7206_outsw,
-
 	.mv_init_irq		= init_se7206_IRQ,
 };

arch/sh/boards/mach-se/770x/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the 770x SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o

arch/sh/boards/mach-se/770x/io.c

@@ -1,156 +0,0 @@
-/*
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <mach-se/mach/se.h>
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port & 0xff000000)
-		return ( volatile __u16 *) port;
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x1000)
-		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-	if (shifted_port(port))
-		return (*port2adr(port) >> 8);
-	else
-		return (*port2adr(port))&0xff;
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	if (shifted_port(port))
-		v = (*port2adr(port) >> 8);
-	else
-		v = (*port2adr(port))&0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-	if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-	if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-	if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-	if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	if (shifted_port(port)) {
-		while (count--)
-			*ap++ = *p >> 8;
-	} else {
-		while (count--)
-			*ap++ = *p;
-	}
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	if (shifted_port(port)) {
-		while (count--)
-			*p = *ap++ << 8;
-	} else {
-		while (count--)
-			*p = *ap++;
-	}
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}

arch/sh/boards/mach-se/770x/setup.c

@@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = {
 #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 	.mv_nr_irqs             = 104,
 #endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
 	.mv_init_irq		= init_se_IRQ,
 };

arch/sh/boards/mach-se/7751/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the 7751 SolutionEngine specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
+obj-y	 := setup.o irq.o

arch/sh/boards/mach-se/7751/io.c

@@ -1,119 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <mach-se/mach/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else
-		v = (*port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}

arch/sh/boards/mach-se/7751/setup.c

@@ -56,23 +56,5 @@ __initcall(se7751_devices_setup);
 static struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
 	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
 	.mv_init_irq		= init_7751se_IRQ,
 };

arch/sh/boards/mach-snapgear/Makefile

@@ -1,5 +0,0 @@
-#
-# Makefile for the SnapGear specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o