Merge branch 'at91' into devel

Documentation/filesystems/Locking

@@ -144,8 +144,8 @@ prototypes:
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
-get_sb		yes		yes
-kill_sb		yes		yes
+get_sb		yes		no
+kill_sb		yes		no
 
 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
@@ -409,12 +409,12 @@ ioctl:			yes	(see below)
 unlocked_ioctl:		no	(see below)
 compat_ioctl:		no
 mmap:			no
-open:			maybe	(see below)
+open:			no
 flush:			no
 release:		no
 fsync:			no	(see below)
 aio_fsync:		no
-fasync:			yes	(see below)
+fasync:			no
 lock:			yes
 readv:			no
 writev:			no
@@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode
 semaphore.  Note some filesystems (i.e. remote ones) provide no
 protection for i_size so you will need to use the BKL.
 
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
 Note: ext2_release() was *the* source of contention on fs-intensive
 loads and dropping BKL on ->release() helps to get rid of that (we still
 grab BKL for cases when we close a file that had been opened r/w, but that

Documentation/laptops/thinkpad-acpi.txt

@@ -44,7 +44,7 @@ detailed description):
 	- LCD brightness control
 	- Volume control
 	- Fan control and monitoring: fan speed, fan enable/disable
-	- Experimental: WAN enable and disable
+	- WAN enable and disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
 would be the safest choice, though).
 
 
-EXPERIMENTAL: WAN
------------------
+WAN
+---
 
 procfs: /proc/acpi/ibm/wan
 sysfs device attribute: wwan_enable (deprecated)
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
 This feature shows the presence and current state of a W-WAN (Sierra
 Wireless EV-DO) device.
 

Documentation/video4linux/CARDLIST.au0828

@@ -3,3 +3,4 @@
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
   4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
+  5 -> Hauppauge Woodbury                       (au0828)        [2040:8200]

Documentation/video4linux/gspca.txt

@@ -88,14 +88,14 @@ zc3xx		0471:0325	Philips SPC 200 NC
 zc3xx		0471:0326	Philips SPC 300 NC
 sonixj		0471:0327	Philips SPC 600 NC
 sonixj		0471:0328	Philips SPC 700 NC
-zc3xx		0471:032d	Philips spc210nc
-zc3xx		0471:032e	Philips spc315nc
-sonixj		0471:0330	Philips SPC 710NC
+zc3xx		0471:032d	Philips SPC 210 NC
+zc3xx		0471:032e	Philips SPC 315 NC
+sonixj		0471:0330	Philips SPC 710 NC
 spca501		0497:c001	Smile International
 sunplus		04a5:3003	Benq DC 1300
 sunplus		04a5:3008	Benq DC 1500
-sunplus		04a5:300a	Benq DC3410
-spca500		04a5:300c	Benq DC1016
+sunplus		04a5:300a	Benq DC 3410
+spca500		04a5:300c	Benq DC 1016
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
 sunplus		04fc:500c	Sunplus CA500C
@@ -175,19 +175,21 @@ sunplus		08ca:2060	Aiptek PocketDV5300
 tv8532		0923:010f	ICM532 cams
 mars		093a:050f	Mars-Semi Pc-Camera
 pac207		093a:2460	PAC207 Qtec Webcam 100
-pac207		093a:2463	Philips spc200nc pac207
+pac207		093a:2463	Philips SPC 220 NC
 pac207		093a:2464	Labtec Webcam 1200
 pac207		093a:2468	PAC207
 pac207		093a:2470	Genius GF112
-pac207		093a:2471	PAC207 Genius VideoCam ge111
-pac207		093a:2472	PAC207 Genius VideoCam ge110
+pac207		093a:2471	Genius VideoCam ge111
+pac207		093a:2472	Genius VideoCam ge110
 pac7311		093a:2600	PAC7311 Typhoon
-pac7311		093a:2601	PAC7311 Phillips SPC610NC
+pac7311		093a:2601	Philips SPC 610 NC
 pac7311		093a:2603	PAC7312
-pac7311		093a:2608	PAC7311 Trust WB-3300p
-pac7311		093a:260e	PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311		093a:260f	PAC7311 SnakeCam
+pac7311		093a:2608	Trust WB-3300p
+pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
+pac7311		093a:2624	PAC7302
+pac7311		093a:2626	Labtec 2200
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
@@ -220,6 +222,7 @@ sonixj		0c45:60c0	Sangha Sn535
 sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
+sonixj		0c45:6128	Microdia/Sonix SNP325
 sonixj		0c45:612a	Avant Camera
 sonixj		0c45:612c	Typhoon Rasy Cam 1.3MPix
 sonixj		0c45:6130	Sonix Pccam
@@ -234,7 +237,7 @@ zc3xx		10fd:0128	Typhoon Webshot II USB 300k 0x0128
 spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 spca501		1776:501c	Arowana 300K CMOS Camera
-t613		17a1:0128	T613/TAS5130A
+t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
 vc032x		17ef:4802	Lenovo Vc0323+MI1310_SOC
 pac207		2001:f115	D-Link DSB-C120
 spca500		2899:012c	Toptro Industrial

MAINTAINERS

@@ -222,8 +222,7 @@ W:	http://code.google.com/p/aceracpi
 S:	Maintained
 
 ACPI
-P:	Andi Kleen
-M:	ak@linux.intel.com
+P:	Len Brown
 M:	lenb@kernel.org
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
@@ -467,6 +466,12 @@ M:	kernel@wantstofly.org
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
+ARM/AFEB9260 MACHINE SUPPORT
+P:	Sergey Lapin
+M:	slapin@ossfans.org
+L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+S:	Maintained
+
 ARM/AJECO 1ARM MACHINE SUPPORT
 P:	Lennert Buytenhek
 M:	kernel@wantstofly.org
@@ -751,11 +756,13 @@ P:	Ville Syrjala
 M:	syrjala@sci.fi
 S:	Maintained
 
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
 P:	Jay Cliburn
 M:	jcliburn@gmail.com
 P:	Chris Snook
 M:	csnook@redhat.com
+P:	Jie Yang
+M:	jie.yang@atheros.com
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1594,7 +1601,7 @@ S:	Supported
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
-P	David Woodhouse
+P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
 S:	Maintained

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*

arch/arm/configs/afeb9260_defconfig

@@ -0,0 +1,1259 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc2
+# Tue Aug 12 22:30:16 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Atmel AT91 System-on-Chip
+#
+# CONFIG_ARCH_AT91RM9200 is not set
+CONFIG_ARCH_AT91SAM9260=y
+# CONFIG_ARCH_AT91SAM9261 is not set
+# CONFIG_ARCH_AT91SAM9263 is not set
+# CONFIG_ARCH_AT91SAM9RL is not set
+# CONFIG_ARCH_AT91SAM9G20 is not set
+# CONFIG_ARCH_AT91CAP9 is not set
+# CONFIG_ARCH_AT91X40 is not set
+CONFIG_AT91_PMC_UNIT=y
+
+#
+# AT91SAM9260 Variants
+#
+# CONFIG_ARCH_AT91SAM9260_SAM9XE is not set
+
+#
+# AT91SAM9260 / AT91SAM9XE Board Type
+#
+# CONFIG_MACH_AT91SAM9260EK is not set
+# CONFIG_MACH_CAM60 is not set
+# CONFIG_MACH_SAM9_L9260 is not set
+CONFIG_MACH_AFEB9260=y
+# CONFIG_MACH_USB_A9260 is not set
+# CONFIG_MACH_QIL_A9260 is not set
+
+#
+# AT91 Board Options
+#
+
+#
+# AT91 Feature Selections
+#
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+CONFIG_AT91_EARLY_DBGU=y
+# CONFIG_AT91_EARLY_USART0 is not set
+# CONFIG_AT91_EARLY_USART1 is not set
+# CONFIG_AT91_EARLY_USART2 is not set
+# CONFIG_AT91_EARLY_USART3 is not set
+# CONFIG_AT91_EARLY_USART4 is not set
+# CONFIG_AT91_EARLY_USART5 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_DATAFLASH=y
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_ATMEL_SSC=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=y
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_AT91=y
+CONFIG_USB_AT91=y
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ETH is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+CONFIG_RTC_DEBUG=y
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_AT91SAM9 is not set
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y

arch/arm/configs/at91sam9rlek_defconfig

@@ -496,6 +496,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_ATMEL_TSADCC=y
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_INPUT_MISC is not set

arch/arm/include/asm/byteorder.h

@@ -18,15 +18,7 @@
 #include <linux/compiler.h>
 #include <asm/types.h>
 
-#ifdef __ARMEB__
-# define __BIG_ENDIAN
-#else
-# define __LITTLE_ENDIAN
-#endif
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 {
 	__u32 t;
 
@@ -48,8 +40,19 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 
 	return x;
 }
-#define __arch_swab32 __arch_swab32
 
-#include <linux/byteorder.h>
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
 
 #endif
+

arch/arm/mach-at91/Kconfig

@@ -175,6 +175,15 @@ config MACH_SAM9_L9260
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
+config MACH_AFEB9260
+	bool "Custom afeb9260 board v1"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using custom afeb9260 board based on
+	  open hardware design. Select this for revision 1 of the board.
+	  <svn://194.85.238.22/home/users/george/svn/arm9eb>
+	  <http://groups.google.com/group/arm9fpga-evolution-board>
+
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
 	depends on ARCH_AT91SAM9260
@@ -314,6 +323,19 @@ config AT91_PROGRAMMABLE_CLOCKS
 	  Select this if you need to program one or more of the PCK0..PCK3
 	  programmable clock outputs.
 
+config AT91_SLOW_CLOCK
+	bool "Suspend-to-RAM disables main oscillator"
+	depends on SUSPEND
+	help
+	  Select this if you want Suspend-to-RAM to save the most power
+	  possible (without powering off the CPU) by disabling the PLLs
+	  and main oscillator so that only the 32 KiHz clock is available.
+
+	  When only that slow-clock is available, some peripherals lose
+	  functionality.  Many can't issue wakeup events unless faster
+	  clocks are available.  Some lose their operating state and
+	  need to be completely re-initialized.
+
 config AT91_TIMER_HZ
        int "Kernel HZ (jiffies per second)"
        range 32 1024

arch/arm/mach-at91/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
 obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
+obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
@@ -64,6 +65,7 @@ obj-y				+= leds.o
 
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG

arch/arm/mach-at91/at91cap9.c

@@ -141,8 +141,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -207,7 +207,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&ssc1_clk,
 	&ac97_clk,
 	&tcb_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&macb_clk,
 	&aestdes_clk,
 	&adc_clk,

arch/arm/mach-at91/at91cap9_devices.c

@@ -718,6 +718,60 @@ static void __init at91_add_device_watchdog(void) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91CAP9_BASE_PWMC,
+		.end	= AT91CAP9_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91CAP9_ID_PWMC,
+		.end	= AT91CAP9_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91cap9_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_A_periph(AT91_PIN_PB19, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PA11, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91cap9_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
+
 /* --------------------------------------------------------------------
  *  AC97
  * -------------------------------------------------------------------- */

arch/arm/mach-at91/at91sam9263.c

@@ -129,8 +129,8 @@ static struct clk tcb_clk = {
 	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91SAM9263_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -187,7 +187,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&ssc1_clk,
 	&ac97_clk,
 	&tcb_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&macb_clk,
 	&twodge_clk,
 	&udc_clk,

arch/arm/mach-at91/at91sam9263_devices.c

@@ -885,6 +885,59 @@ static void __init at91_add_device_watchdog(void) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9263_BASE_PWMC,
+		.end	= AT91SAM9263_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9263_ID_PWMC,
+		.end	= AT91SAM9263_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9263_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PB7, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PB29, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9263_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  SSC -- Synchronous Serial Controller
  * -------------------------------------------------------------------- */

arch/arm/mach-at91/at91sam9rl.c

@@ -131,8 +131,8 @@ static struct clk tc2_clk = {
 	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk pwmc_clk = {
-	.name		= "pwmc_clk",
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
 	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -180,7 +180,7 @@ static struct clk *periph_clocks[] __initdata = {
 	&tc0_clk,
 	&tc1_clk,
 	&tc2_clk,
-	&pwmc_clk,
+	&pwm_clk,
 	&tsc_clk,
 	&dma_clk,
 	&udphs_clk,

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -526,6 +526,51 @@ static void __init at91_add_device_tc(void) { }
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_TSC,
+		.end	= AT91SAM9RL_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_TSC,
+		.end	= AT91SAM9RL_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9rl_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(void)
+{
+	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
+	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
+	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
+	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
+
+	platform_device_register(&at91sam9rl_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(void) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  RTC
  * -------------------------------------------------------------------- */
@@ -591,6 +636,59 @@ static void __init at91_add_device_watchdog(void) {}
 #endif
 
 
+/* --------------------------------------------------------------------
+ *  PWM
+ * --------------------------------------------------------------------*/
+
+#if defined(CONFIG_ATMEL_PWM)
+static u32 pwm_mask;
+
+static struct resource pwm_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_PWMC,
+		.end	= AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_PWMC,
+		.end	= AT91SAM9RL_ID_PWMC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_pwm0_device = {
+	.name	= "atmel_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data		= &pwm_mask,
+	},
+	.resource	= pwm_resources,
+	.num_resources	= ARRAY_SIZE(pwm_resources),
+};
+
+void __init at91_add_device_pwm(u32 mask)
+{
+	if (mask & (1 << AT91_PWM0))
+		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM0 */
+
+	if (mask & (1 << AT91_PWM1))
+		at91_set_B_periph(AT91_PIN_PB9, 1);	/* enable PWM1 */
+
+	if (mask & (1 << AT91_PWM2))
+		at91_set_B_periph(AT91_PIN_PD5, 1);	/* enable PWM2 */
+
+	if (mask & (1 << AT91_PWM3))
+		at91_set_B_periph(AT91_PIN_PD8, 1);	/* enable PWM3 */
+
+	pwm_mask = mask;
+
+	platform_device_register(&at91sam9rl_pwm0_device);
+}
+#else
+void __init at91_add_device_pwm(u32 mask) {}
+#endif
+
+
 /* --------------------------------------------------------------------
  *  SSC -- Synchronous Serial Controller
  * -------------------------------------------------------------------- */

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -0,0 +1,210 @@
+/*
+ * linux/arch/arm/mach-at91/board-afeb-9260v1.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2006 Atmel
+ *  Copyright (C) 2008 Sergey Lapin
+ *
+ * A custom board designed as open hardware; PCBs and various information
+ * is available at http://groups.google.com/group/arm9fpga-evolution-board/
+ * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+#include "generic.h"
+
+
+static void __init afeb9260_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			     ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR
+			   | ATMEL_UART_DCD | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init afeb9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata afeb9260_usbh_data = {
+	.ports		= 1,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata afeb9260_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info afeb9260_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata afeb9260_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PA9,
+	.is_rmii	= 0,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata afeb9260_nand_partition[] = {
+	{
+		.name	= "bootloader",
+		.offset	= 0,
+		.size	= (640 * SZ_1K),
+	},
+	{
+		.name	= "kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_2M,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(afeb9260_nand_partition);
+	return afeb9260_nand_partition;
+}
+
+static struct atmel_nand_data __initdata afeb9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+	.bus_width_16	= 0,
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+	.slot_b		= 1,
+	.wire4		= 1,
+};
+
+
+
+static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("fm3130", 0x68),
+		I2C_BOARD_INFO("24c64", 0x50),
+	},
+};
+
+static void __init afeb9260_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&afeb9260_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&afeb9260_udc_data);
+	/* SPI */
+	at91_add_device_spi(afeb9260_spi_devices,
+			ARRAY_SIZE(afeb9260_spi_devices));
+	/* NAND */
+	at91_add_device_nand(&afeb9260_nand_data);
+	/* Ethernet */
+	at91_add_device_eth(&afeb9260_macb_data);
+
+	/* Standard function's pin assignments are not
+	 * appropriate for us and generic code provide
+	 * no API to configure these pins any other way */
+	at91_set_B_periph(AT91_PIN_PA10, 0);	/* ETX2 */
+	at91_set_B_periph(AT91_PIN_PA11, 0);	/* ETX3 */
+	/* MMC */
+	at91_add_device_mmc(0, &afeb9260_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(afeb9260_i2c_devices,
+			ARRAY_SIZE(afeb9260_i2c_devices));
+}
+
+MACHINE_START(AFEB9260, "Custom afeb9260 board")
+	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= afeb9260_map_io,
+	.init_irq	= afeb9260_init_irq,
+	.init_machine	= afeb9260_board_init,
+MACHINE_END
+

arch/arm/mach-at91/board-cap9adk.c

@@ -214,7 +214,7 @@ static struct physmap_flash_data cap9adk_nor_data = {
 };
 
 #define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	0x800000
+#define NOR_SIZE	SZ_8M
 
 static struct resource nor_flash_resources[] = {
 	{

arch/arm/mach-at91/board-carmeva.c

@@ -25,7 +25,6 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,6 +114,30 @@ static struct spi_board_info carmeva_spi_devices[] = {
 	},
 };
 
+static struct gpio_led carmeva_leds[] = {
+	{ /* "user led 1", LED9 */
+		.name			= "led9",
+		.gpio			= AT91_PIN_PA21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	},
+	{ /* "user led 2", LED10 */
+		.name			= "led10",
+		.gpio			= AT91_PIN_PA25,
+		.active_low		= 1,
+	},
+	{ /* "user led 3", LED11 */
+		.name			= "led11",
+		.gpio			= AT91_PIN_PA26,
+		.active_low		= 1,
+	},
+	{ /* "user led 4", LED12 */
+		.name			= "led12",
+		.gpio			= AT91_PIN_PA18,
+		.active_low		= 1,
+	}
+};
+
 static void __init carmeva_board_init(void)
 {
 	/* Serial */
@@ -132,6 +156,8 @@ static void __init carmeva_board_init(void)
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
 	at91_add_device_mmc(0, &carmeva_mmc_data);
+	/* LEDs */
+	at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
 }
 
 MACHINE_START(CARMEVA, "Carmeva")

arch/arm/mach-at91/board-csb337.c

@@ -28,7 +28,6 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +36,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -114,7 +114,7 @@ static struct spi_board_info csb337_spi_devices[] = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x800000
+#define CSB_FLASH_SIZE	SZ_8M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{
@@ -193,11 +193,11 @@ static struct platform_device csb300_button_device = {
 
 static void __init csb300_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PB29, 0);	/* sw0 */
+	at91_set_gpio_input(AT91_PIN_PB29, 1);	/* sw0 */
 	at91_set_deglitch(AT91_PIN_PB29, 1);
-	at91_set_gpio_input(AT91_PIN_PB28, 0);	/* sw1 */
+	at91_set_gpio_input(AT91_PIN_PB28, 1);	/* sw1 */
 	at91_set_deglitch(AT91_PIN_PB28, 1);
-	at91_set_gpio_input(AT91_PIN_PA21, 0);	/* sw2 */
+	at91_set_gpio_input(AT91_PIN_PA21, 1);	/* sw2 */
 	at91_set_deglitch(AT91_PIN_PA21, 1);
 
 	platform_device_register(&csb300_button_device);
@@ -224,7 +224,7 @@ static struct gpio_led csb_leds[] = {
 		.gpio			= AT91_PIN_PB0,
 		.active_low		= 1,
 		.default_trigger	= "ide-disk",
-	},
+	}
 };
 
 

arch/arm/mach-at91/board-csb637.c

@@ -25,7 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,6 +33,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -72,7 +72,7 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 };
 
 #define CSB_FLASH_BASE	AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE	0x1000000
+#define CSB_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition csb_flash_partitions[] = {
 	{

arch/arm/mach-at91/board-dk.c

@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -157,7 +157,7 @@ static struct atmel_nand_data __initdata dk_nand_data = {
 };
 
 #define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	0x200000
+#define DK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data dk_flash_data = {
 	.width		= 2,

arch/arm/mach-at91/board-ecbat91.c

@@ -86,7 +86,7 @@ static struct mtd_partition __initdata my_flash0_partitions[] =
 	{	/* 0x8400 */
 		.name	= "Darrell-loader",
 		.offset	= 0,
-		.size	= 12* 1056,
+		.size	= 12 * 1056,
 	},
 	{
 		.name	= "U-boot",

arch/arm/mach-at91/board-ek.c

@@ -29,7 +29,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -116,7 +116,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	0x200000
+#define EK_FLASH_SIZE	SZ_2M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,

arch/arm/mach-at91/board-picotux200.c

@@ -105,7 +105,7 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = {
 // };
 
 #define PICOTUX200_FLASH_BASE	AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE	0x400000
+#define PICOTUX200_FLASH_SIZE	SZ_4M
 
 static struct physmap_flash_data picotux200_flash_data = {
 	.width	= 2,

arch/arm/mach-at91/board-qil-a9260.c

@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -119,18 +119,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 };
 

arch/arm/mach-at91/board-sam9-l9260.c

@@ -126,11 +126,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Bootloader Area",
 		.offset	= 0,
-		.size	= 10 * 1024 * 1024,
+		.size	= 10 * SZ_1M,
 	},
 	{
 		.name	= "User Area",
-		.offset	= 10 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };

arch/arm/mach-at91/board-sam9260ek.c

@@ -27,8 +27,10 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/i2c/at24.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,6 +39,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -163,11 +166,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -222,6 +225,73 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{
+		.gpio		= AT91_PIN_PA30,
+		.code		= BTN_3,
+		.desc		= "Button 3",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+	{
+		.gpio		= AT91_PIN_PA31,
+		.code		= BTN_4,
+		.desc		= "Button 4",
+		.active_low	= 1,
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_gpio_input(AT91_PIN_PA30, 1);	/* btn3 */
+	at91_set_deglitch(AT91_PIN_PA30, 1);
+	at91_set_gpio_input(AT91_PIN_PA31, 1);	/* btn4 */
+	at91_set_deglitch(AT91_PIN_PA31, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+
 static void __init ek_board_init(void)
 {
 	/* Serial */
@@ -239,12 +309,14 @@ static void __init ek_board_init(void)
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* SSC (to AT73C213) */
 	at73c213_set_clk(&at73c213_data);
 	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* Push Buttons */
+	ek_add_device_buttons();
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")

arch/arm/mach-at91/board-sam9261ek.c

@@ -35,7 +35,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,6 +43,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -168,11 +168,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -435,24 +435,28 @@ static struct gpio_keys_button ek_buttons[] = {
 		.code		= BTN_0,
 		.desc		= "Button 0",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA26,
 		.code		= BTN_1,
 		.desc		= "Button 1",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA25,
 		.code		= BTN_2,
 		.desc		= "Button 2",
 		.active_low	= 1,
+		.wakeup		= 1,
 	},
 	{
 		.gpio		= AT91_PIN_PA24,
 		.code		= BTN_3,
 		.desc		= "Button 3",
 		.active_low	= 1,
+		.wakeup		= 1,
 	}
 };
 
@@ -472,13 +476,13 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_gpio_input(AT91_PIN_PA27, 0);	/* btn0 */
+	at91_set_gpio_input(AT91_PIN_PA27, 1);	/* btn0 */
 	at91_set_deglitch(AT91_PIN_PA27, 1);
-	at91_set_gpio_input(AT91_PIN_PA26, 0);	/* btn1 */
+	at91_set_gpio_input(AT91_PIN_PA26, 1);	/* btn1 */
 	at91_set_deglitch(AT91_PIN_PA26, 1);
-	at91_set_gpio_input(AT91_PIN_PA25, 0);	/* btn2 */
+	at91_set_gpio_input(AT91_PIN_PA25, 1);	/* btn2 */
 	at91_set_deglitch(AT91_PIN_PA25, 1);
-	at91_set_gpio_input(AT91_PIN_PA24, 0);	/* btn3 */
+	at91_set_gpio_input(AT91_PIN_PA24, 1);	/* btn3 */
 	at91_set_deglitch(AT91_PIN_PA24, 1);
 
 	platform_device_register(&ek_button_device);

arch/arm/mach-at91/board-sam9263ek.c

@@ -26,13 +26,14 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/i2c/at24.h>
 #include <linux/fb.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/leds.h>
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,6 +42,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -172,11 +174,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 64 * 1024 * 1024,
+		.size	= SZ_64M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -202,13 +204,31 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 };
 
 
+/*
+ * I2C devices
+ */
+static struct at24_platform_data at24c512 = {
+	.byte_len	= SZ_512K / 8,
+	.page_size	= 128,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+		.platform_data = &at24c512,
+	},
+	/* more devices can be added using expansion connectors */
+};
+
 /*
  * LCD Controller
  */
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
 static struct fb_videomode at91_tft_vga_modes[] = {
 	{
-	        .name           = "TX09D50VM1CCA @ 60",
+		.name		= "TX09D50VM1CCA @ 60",
 		.refresh	= 60,
 		.xres		= 240,		.yres		= 320,
 		.pixclock	= KHZ2PICOS(4965),
@@ -224,7 +244,7 @@ static struct fb_videomode at91_tft_vga_modes[] = {
 
 static struct fb_monspecs at91fb_default_monspecs = {
 	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
+	.monitor	= "TX09D70VM1CCA",
 
 	.modedb		= at91_tft_vga_modes,
 	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
@@ -235,7 +255,7 @@ static struct fb_monspecs at91fb_default_monspecs = {
 };
 
 #define AT91SAM9263_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
+					| ATMEL_LCDC_DISTYPE_TFT \
 					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
 
 static void at91_lcdc_power_control(int on)
@@ -277,7 +297,7 @@ static struct gpio_keys_button ek_buttons[] = {
 		.active_low	= 1,
 		.desc		= "right_click",
 		.wakeup		= 1,
-	},
+	}
 };
 
 static struct gpio_keys_platform_data ek_button_data = {
@@ -296,9 +316,9 @@ static struct platform_device ek_button_device = {
 
 static void __init ek_add_device_buttons(void)
 {
-	at91_set_GPIO_periph(AT91_PIN_PC5, 0);	/* left button */
+	at91_set_GPIO_periph(AT91_PIN_PC5, 1);	/* left button */
 	at91_set_deglitch(AT91_PIN_PC5, 1);
-	at91_set_GPIO_periph(AT91_PIN_PC4, 0);	/* right button */
+	at91_set_GPIO_periph(AT91_PIN_PC4, 1);	/* right button */
 	at91_set_deglitch(AT91_PIN_PC4, 1);
 
 	platform_device_register(&ek_button_device);
@@ -320,25 +340,32 @@ static struct atmel_ac97_data ek_ac97_data = {
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
 static struct gpio_led ek_leds[] = {
-	{	/* "left" led, green, userled1, pwm1 */
-		.name			= "ds1",
-		.gpio			= AT91_PIN_PB8,
-		.active_low		= 1,
-		.default_trigger	= "mmc0",
-	},
-	{	/* "right" led, green, userled2, pwm2 */
+	{	/* "right" led, green, userled2 (could be driven by pwm2) */
 		.name			= "ds2",
 		.gpio			= AT91_PIN_PC29,
 		.active_low		= 1,
 		.default_trigger	= "nand-disk",
 	},
-	{	/* "power" led, yellow, pwm0 */
+	{	/* "power" led, yellow (could be driven by pwm0) */
 		.name			= "ds3",
 		.gpio			= AT91_PIN_PB7,
 		.default_trigger	= "heartbeat",
 	}
 };
 
+/*
+ * PWM Leds
+ */
+static struct gpio_led ek_pwm_led[] = {
+	/* For now only DS1 is PWM-driven (by pwm1) */
+	{
+		.name			= "ds1",
+		.gpio			= 1,	/* is PWM channel number */
+		.active_low		= 1,
+		.default_trigger	= "none",
+	}
+};
+
 
 static void __init ek_board_init(void)
 {
@@ -360,7 +387,7 @@ static void __init ek_board_init(void)
 	/* NAND */
 	at91_add_device_nand(&ek_nand_data);
 	/* I2C */
-	at91_add_device_i2c(NULL, 0);
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
@@ -369,6 +396,7 @@ static void __init ek_board_init(void)
 	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
 }
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")

arch/arm/mach-at91/board-sam9g20ek.c

@@ -122,16 +122,16 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name   = "Bootstrap",
 		.offset = 0,
-		.size   = 4 * 1024 * 1024,
+		.size   = 4 * SZ_1M,
 	},
 	{
 		.name	= "Partition 1",
-		.offset	= 4 * 1024 * 1024,
-		.size	= 60 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 64 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };

arch/arm/mach-at91/board-sam9rlek.c

@@ -18,7 +18,6 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,6 +26,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
@@ -81,11 +81,11 @@ static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Partition 1",
 		.offset	= 0,
-		.size	= 256 * 1024,
+		.size	= SZ_256K,
 	},
 	{
 		.name	= "Partition 2",
-		.offset	= 256 * 1024 ,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	},
 };
@@ -195,6 +195,8 @@ static void __init ek_board_init(void)
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen Controller */
+	at91_add_device_tsadcc();
 }
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")

arch/arm/mach-at91/board-usb-a9260.c

@@ -30,7 +30,6 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,6 +38,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -93,18 +93,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Uboot & Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 

arch/arm/mach-at91/board-usb-a9263.c

@@ -29,7 +29,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,6 +37,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91_shdwc.h>
@@ -106,18 +106,18 @@ static struct at91_eth_data __initdata ek_macb_data = {
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "Linux Kernel",
-		.offset	= 0x00000000,
-		.size	= 16 * 1024 * 1024,
+		.offset	= 0,
+		.size	= SZ_16M,
 	},
 	{
 		.name	= "Root FS",
-		.offset	= 0x01000000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	},
 	{
 		.name	= "FS",
-		.offset	= 0x08800000,
-		.size	= 120 * 1024 * 1024,
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
 	}
 };
 

arch/arm/mach-at91/board-yl-9200.c

@@ -33,7 +33,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,6 +41,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
@@ -150,27 +150,27 @@ static struct mtd_partition __initdata yl9200_nand_partition[] = {
 	{
 		.name	= "AT91 NAND partition 1, boot",
 		.offset	= 0,
-		.size	= 1 * SZ_256K
+		.size	= SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 2, kernel",
-		.offset	= 1 * SZ_256K,
-		.size	= 2 * SZ_1M - 1 * SZ_256K
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name	= "AT91 NAND partition 3, filesystem",
-		.offset	= 2 * SZ_1M,
+		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 14 * SZ_1M
 	},
 	{
 		.name	= "AT91 NAND partition 4, storage",
-		.offset	= 16 * SZ_1M,
-		.size	= 16 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_16M
 	},
 	{
 		.name	= "AT91 NAND partition 5, ext-fs",
-		.offset	= 32 * SZ_1M,
-		.size	= 32 * SZ_1M
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_32M
 	}
 };
 
@@ -193,24 +193,24 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
  * NOR Flash
  */
 #define YL9200_FLASH_BASE	AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE	0x1000000
+#define YL9200_FLASH_SIZE	SZ_16M
 
 static struct mtd_partition yl9200_flash_partitions[] = {
 	{
 		.name		= "Bootloader",
-		.size		= 0x00040000,
 		.offset		= 0,
+		.size		= SZ_256K,
 		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
 	},
 	{
 		.name		= "Kernel",
-		.size		= 0x001C0000,
-		.offset		= 0x00040000,
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= (2 * SZ_1M) - SZ_256K
 	},
 	{
 		.name		= "Filesystem",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00200000
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL
 	}
 };
 
@@ -390,10 +390,6 @@ static struct spi_board_info yl9200_spi_devices[] = {
 #if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 #include <video/s1d13xxxfb.h>
 
-#define AT91_FB_REG_BASE	0x80000000L
-#define AT91_FB_REG_SIZE	0x200
-#define AT91_FB_VMEM_BASE	0x80200000L
-#define AT91_FB_VMEM_SIZE	0x200000L
 
 static void __init yl9200_init_video(void)
 {
@@ -516,29 +512,33 @@ static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 	{S1DREG_COM_DISP_MODE,		0x01},	/* Display Mode Register, LCD only*/
 };
 
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
 static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
 	.initregs		= yl9200_s1dfb_initregs,
 	.initregssize		= ARRAY_SIZE(yl9200_s1dfb_initregs),
 	.platform_init_video	= yl9200_init_video,
 };
 
+#define YL9200_FB_REG_BASE	AT91_CHIPSELECT_7
+#define YL9200_FB_VMEM_BASE	YL9200_FB_REG_BASE + SZ_2M
+#define YL9200_FB_VMEM_SIZE	SZ_2M
+
 static struct resource yl9200_s1dfb_resource[] = {
 	[0] = {	/* video mem */
 		.name	= "s1d13xxxfb memory",
-		.start	= AT91_FB_VMEM_BASE,
-		.end	= AT91_FB_VMEM_BASE + AT91_FB_VMEM_SIZE -1,
+		.start	= YL9200_FB_VMEM_BASE,
+		.end	= YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {	/* video registers */
 		.name	= "s1d13xxxfb registers",
-		.start	= AT91_FB_REG_BASE,
-		.end	= AT91_FB_REG_BASE + AT91_FB_REG_SIZE -1,
+		.start	= YL9200_FB_REG_BASE,
+		.end	= YL9200_FB_REG_BASE + SZ_512 -1,
 		.flags	= IORESOURCE_MEM,
 	},
 };
 
+static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
+
 static struct platform_device yl9200_s1dfb_device = {
 	.name		= "s1d13806fb",
 	.id		= -1,

arch/arm/mach-at91/include/mach/at91_pit.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_pit.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Periodic Interval Timer (PIT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91_rstc.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_rstc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Reset Controller (RSTC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91_rtt.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_rtt.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Real-time Timer (RTT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91_shdwc.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_shdwc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Shutdown Controller (SHDWC) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91_wdt.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91_wdt.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Watchdog Timer (WDT) - System peripherals regsters.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h

@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
  *
+ *  (C) 2008 Andrew Victor
+ *
  * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
  * Based on AT91CAP9 datasheet revision B.
  *

arch/arm/mach-at91/include/mach/at91sam9260_matrix.h

@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
  *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9260 datasheet revision B.
  *

arch/arm/mach-at91/include/mach/at91sam9261_matrix.h

@@ -1,6 +1,8 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
  *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
  * Memory Controllers (MATRIX, EBI) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91sam9_sdramc.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * SDRAM Controllers (SDRAMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/at91sam9_smc.h

@@ -1,6 +1,9 @@
 /*
  * arch/arm/mach-at91/include/mach/at91sam9_smc.h
  *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
  * Static Memory Controllers (SMC) - System peripherals registers.
  * Based on AT91SAM9261 datasheet revision D.
  *

arch/arm/mach-at91/include/mach/board.h

@@ -132,6 +132,16 @@ struct atmel_uart_data {
 };
 extern void __init at91_add_device_serial(void);
 
+/*
+ * PWM
+ */
+#define AT91_PWM0	0
+#define AT91_PWM1	1
+#define AT91_PWM2	2
+#define AT91_PWM3	3
+
+extern void __init at91_add_device_pwm(u32 mask);
+
 /*
  * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
  * platform devices.  Their SSC ID is part of their configuration data,
@@ -162,9 +172,13 @@ extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
  /* ISI */
 extern void __init at91_add_device_isi(void);
 
+ /* Touchscreen Controller */
+extern void __init at91_add_device_tsadcc(void);
+
  /* LEDs */
 extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);

arch/arm/mach-at91/leds.c

@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 
 #include <mach/board.h>
 #include <mach/gpio.h>
@@ -21,15 +22,13 @@
 
 #if defined(CONFIG_NEW_LEDS)
 
-#include <linux/platform_device.h>
-
 /*
  * New cross-platform LED support.
  */
 
 static struct gpio_led_platform_data led_data;
 
-static struct platform_device at91_leds = {
+static struct platform_device at91_gpio_leds_device = {
 	.name			= "leds-gpio",
 	.id			= -1,
 	.dev.platform_data	= &led_data,
@@ -47,7 +46,7 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr)
 
 	led_data.leds = leds;
 	led_data.num_leds = nr;
-	platform_device_register(&at91_leds);
+	platform_device_register(&at91_gpio_leds_device);
 }
 
 #else
@@ -55,6 +54,44 @@ void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
 #endif
 
 
+/* ------------------------------------------------------------------------- */
+
+#if defined (CONFIG_LEDS_ATMEL_PWM)
+
+/*
+ * PWM Leds
+ */
+
+static struct gpio_led_platform_data pwm_led_data;
+
+static struct platform_device at91_pwm_leds_device = {
+	.name			= "leds-atmel-pwm",
+	.id			= -1,
+	.dev.platform_data	= &pwm_led_data,
+};
+
+void __init at91_pwm_leds(struct gpio_led *leds, int nr)
+{
+	int i;
+	u32 pwm_mask = 0;
+
+	if (!nr)
+		return;
+
+	for (i = 0; i < nr; i++)
+		pwm_mask |= (1 << leds[i].gpio);
+
+	pwm_led_data.leds = leds;
+	pwm_led_data.num_leds = nr;
+
+	at91_add_device_pwm(pwm_mask);
+	platform_device_register(&at91_pwm_leds_device);
+}
+#else
+void __init at91_pwm_leds(struct gpio_led *leds, int nr){}
+#endif
+
+
 /* ------------------------------------------------------------------------- */
 
 #if defined(CONFIG_LEDS)

arch/arm/mach-at91/pm_slowclock.S

@@ -0,0 +1,283 @@
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+#else
+#include <mach/at91sam9_sdramc.h>
+#endif
+
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+/*
+ * When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
+ * clock during suspend by adjusting its prescalar and divisor.
+ * NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
+ *       are errata regarding adjusting the prescalar and divisor.
+ */
+#undef SLOWDOWN_MASTER_CLOCK
+
+#define MCKRDY_TIMEOUT		1000
+#define MOSCRDY_TIMEOUT 	1000
+#define PLLALOCK_TIMEOUT	1000
+#define PLLBLOCK_TIMEOUT	1000
+
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ */
+	.macro wait_mckrdy
+	mov	r4, #MCKRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MCKRDY
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ */
+	.macro wait_moscrdy
+	mov	r4, #MOSCRDY_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_MOSCS
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLA has locked.
+ */
+	.macro wait_pllalock
+	mov	r4, #PLLALOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKA
+	beq	1b
+2:
+	.endm
+
+/*
+ * Wait until PLLB has locked.
+ */
+	.macro wait_pllblock
+	mov	r4, #PLLBLOCK_TIMEOUT
+1:	sub	r4, r4, #1
+	cmp	r4, #0
+	beq	2f
+	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
+	tst	r3, #AT91_PMC_LOCKB
+	beq	1b
+2:
+	.endm
+
+	.text
+
+ENTRY(at91_slow_clock)
+	/* Save registers on stack */
+	stmfd	sp!, {r0 - r12, lr}
+
+	/*
+	 * Register usage:
+	 *  R1 = Base address of AT91_PMC
+	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R3 = temporary register
+	 *  R4 = temporary register
+	 */
+	ldr	r1, .at91_va_base_pmc
+	ldr	r2, .at91_va_base_sdramc
+
+	/* Drain write buffer */
+	mcr	p15, 0, r0, c7, c10, 4
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Put SDRAM in self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91_SDRAMC_SRR]
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Enable SDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, .saved_sam9_lpr
+
+	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Save Master clock setting */
+	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	str	r3, .saved_mckr
+
+	/*
+	 * Set the Master clock source to slow clock
+	 */
+	bic	r3, r3, #AT91_PMC_CSS
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * Set the Master Clock PRES and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	mov	r3, #0
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/* Save PLLA setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	str	r3, .saved_pllar
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+	/* Save PLLB setting and disable it */
+	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	str	r3, .saved_pllbr
+
+	mov	r3, #AT91_PMC_PLLCOUNT
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Turn off the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	bic	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	/* Wait for interrupt */
+	mcr	p15, 0, r0, c7, c0, 4
+
+	/* Turn on the main oscillator */
+	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	orr	r3, r3, #AT91_PMC_MOSCEN
+	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+
+	wait_moscrdy
+
+	/* Restore PLLB setting */
+	ldr	r3, .saved_pllbr
+	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+
+	wait_pllblock
+
+	/* Restore PLLA setting */
+	ldr	r3, .saved_pllar
+	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+
+	wait_pllalock
+
+#ifdef SLOWDOWN_MASTER_CLOCK
+	/*
+	 * First set PRES if it was not 0,
+	 * than set CSS and MDIV fields.
+	 *
+	 * See AT91RM9200 errata #27 and #28 for details.
+	 */
+	ldr	r3, .saved_mckr
+	tst	r3, #AT91_PMC_PRES
+	beq	2f
+	and	r3, r3, #AT91_PMC_PRES
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+#endif
+
+	/*
+	 * Restore master clock setting
+	 */
+2:	ldr	r3, .saved_mckr
+	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+
+	wait_mckrdy
+
+#ifdef CONFIG_ARCH_AT91RM9200
+	/* Do nothing - self-refresh is automatically disabled. */
+#elif defined(CONFIG_ARCH_AT91CAP9)
+	/* Restore LPR on AT91CAP9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+#else
+	/* Restore LPR on AT91SAM9 */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+#endif
+
+	/* Restore registers, and return */
+	ldmfd	sp!, {r0 - r12, pc}
+
+
+.saved_mckr:
+	.word 0
+
+.saved_pllar:
+	.word 0
+
+.saved_pllbr:
+	.word 0
+
+.saved_sam9_lpr:
+	.word 0
+
+.at91_va_base_pmc:
+	.word AT91_VA_BASE_SYS + AT91_PMC
+
+#ifdef CONFIG_ARCH_AT91RM9200
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS
+#elif defined(CONFIG_ARCH_AT91CAP9)
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+#else
+.at91_va_base_sdramc:
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+#endif
+
+ENTRY(at91_slow_clock_sz)
+	.word .-at91_slow_clock

arch/avr32/kernel/asm-offsets.c

@@ -4,6 +4,8 @@
  * to extract and format the required data.
  */
 
+#include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
 
@@ -17,4 +19,8 @@ void foo(void)
 	OFFSET(TI_rar_saved, thread_info, rar_saved);
 	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
+	BLANK();
+	OFFSET(TSK_active_mm, task_struct, active_mm);
+	BLANK();
+	OFFSET(MM_pgd, mm_struct, pgd);
 }

arch/avr32/kernel/entry-avr32b.S

@@ -334,9 +334,64 @@ save_full_context_ex:
 
 	/* Low-level exception handlers */
 handle_critical:
+	/*
+	 * AT32AP700x errata:
+	 *
+	 * After a Java stack overflow or underflow trap, any CPU
+	 * memory access may cause erratic behavior. This will happen
+	 * when the four least significant bits of the JOSP system
+	 * register contains any value between 9 and 15 (inclusive).
+	 *
+	 * Possible workarounds:
+	 *   - Don't use the Java Extension Module
+	 *   - Ensure that the stack overflow and underflow trap
+	 *     handlers do not do any memory access or trigger any
+	 *     exceptions before the overflow/underflow condition is
+	 *     cleared (by incrementing or decrementing the JOSP)
+	 *   - Make sure that JOSP does not contain any problematic
+	 *     value before doing any exception or interrupt
+	 *     processing.
+	 *   - Set up a critical exception handler which writes a
+	 *     known-to-be-safe value, e.g. 4, to JOSP before doing
+	 *     any further processing.
+	 *
+	 * We'll use the last workaround for now since we cannot
+	 * guarantee that user space processes don't use Java mode.
+	 * Non-well-behaving userland will be terminated with extreme
+	 * prejudice.
+	 */
+#ifdef CONFIG_CPU_AT32AP700X
+	/*
+	 * There's a chance we can't touch memory, so temporarily
+	 * borrow PTBR to save the stack pointer while we fix things
+	 * up...
+	 */
+	mtsr	SYSREG_PTBR, sp
+	mov	sp, 4
+	mtsr	SYSREG_JOSP, sp
+	mfsr	sp, SYSREG_PTBR
+	sub	pc, -2
+
+	/* Push most of pt_regs on stack. We'll do the rest later */
 	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	pushm	r0-r12
+
+	/* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+	get_thread_info r0
+	ld.w	r1, r0[TI_task]
+	ld.w	r2, r1[TSK_active_mm]
+	ld.w	r3, r2[MM_pgd]
+	mtsr	SYSREG_PTBR, r3
+#else
+	sub	sp, 4
+	pushm	r0-r12
+#endif
+	sub	r0, sp, -(14 * 4)
+	mov	r1, lr
+	mfsr	r2, SYSREG_RAR_EX
+	mfsr	r3, SYSREG_RSR_EX
+	pushm	r0-r3
+
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
 	rcall	do_critical_exception

arch/avr32/mach-at32ap/pm-at32ap700x.S

@@ -134,7 +134,7 @@ pm_standby:
 	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
 	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
 	sync	0			/* flush write buffer */
-	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
 	ld.w	r11, r12[SDRAMC_LPR]
 	unmask_interrupts
 	sleep	CPU_SLEEP_FROZEN

arch/ia64/include/asm/sections.h

@@ -21,5 +21,8 @@ extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_b
 extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];
 
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
 #endif /* _ASM_IA64_SECTIONS_H */
 

arch/ia64/kernel/module.c

@@ -31,9 +31,11 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/string.h>
+#include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 
 #include <asm/patch.h>
+#include <asm/sections.h>
 #include <asm/unaligned.h>
 
 #define ARCH_MODULE_DEBUG 0
@@ -941,3 +943,13 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
+
+void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}

arch/mips/Kconfig

@@ -1886,6 +1886,15 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/mips/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA

arch/mips/kernel/setup.c

@@ -160,30 +160,33 @@ early_param("rd_size", rd_size_early);
 static unsigned long __init init_initrd(void)
 {
 	unsigned long end;
-	u32 *initrd_header;
 
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (initrd_start && initrd_end > initrd_start)
-		goto sanitize;
+	if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+		u32 *initrd_header;
 
-	/*
-	 * See if initrd has been added to the kernel image by
-	 * arch/mips/boot/addinitrd.c. In that case a header is
-	 * prepended to initrd and is made up by 8 bytes. The fisrt
-	 * word is a magic number and the second one is the size of
-	 * initrd.  Initrd start must be page aligned in any cases.
-	 */
-	initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-	if (initrd_header[0] != 0x494E5244)
+		/*
+		 * See if initrd has been added to the kernel image by
+		 * arch/mips/boot/addinitrd.c. In that case a header is
+		 * prepended to initrd and is made up by 8 bytes. The first
+		 * word is a magic number and the second one is the size of
+		 * initrd.  Initrd start must be page aligned in any cases.
+		 */
+		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+		if (initrd_header[0] != 0x494E5244)
+			goto disable;
+		initrd_start = (unsigned long)(initrd_header + 2);
+		initrd_end = initrd_start + initrd_header[1];
+#else
 		goto disable;
-	initrd_start = (unsigned long)(initrd_header + 2);
-	initrd_end = initrd_start + initrd_header[1];
+#endif
+	}
 
-sanitize:
 	if (initrd_start & ~PAGE_MASK) {
 		pr_err("initrd start must be page aligned\n");
 		goto disable;

arch/mips/kernel/traps.c

@@ -373,8 +373,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 	do_exit(SIGSEGV);
 }
 
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
 
 __asm__(
 "	.section	__dbe_table, \"a\"\n"
@@ -1200,7 +1200,7 @@ void *set_except_vector(int n, void *addr)
 	if (n == 0 && cpu_has_divec) {
 		*(u32 *)(ebase + 0x200) = 0x08000000 |
 					  (0x03ffffff & (handler >> 2));
-		flush_icache_range(ebase + 0x200, ebase + 0x204);
+		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
@@ -1283,7 +1283,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
 		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
-		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
 	}
 	else {
 		/*
@@ -1295,7 +1296,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		w = (u32 *)b;
 		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
 		*w = 0;
-		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
 	}
 
 	return (void *)old_handler;
@@ -1515,7 +1517,7 @@ void __cpuinit per_cpu_trap_init(void)
 void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
-	flush_icache_range(ebase + offset, ebase + offset + size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
 static char panic_null_cerr[] __cpuinitdata =
@@ -1680,6 +1682,8 @@ void __init trap_init(void)
 	signal32_init();
 #endif
 
-	flush_icache_range(ebase, ebase + 0x400);
+	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
 }

arch/mips/mm/c-r3k.c

@@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void)
 	flush_cache_range = r3k_flush_cache_range;
 	flush_cache_page = r3k_flush_cache_page;
 	flush_icache_range = r3k_flush_icache_range;
+	local_flush_icache_range = r3k_flush_icache_range;
 
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;

arch/mips/mm/c-r4k.c

@@ -543,12 +543,8 @@ struct flush_icache_range_args {
 	unsigned long end;
 };
 
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
-	struct flush_icache_range_args *fir_args = args;
-	unsigned long start = fir_args->start;
-	unsigned long end = fir_args->end;
-
 	if (!cpu_has_ic_fills_f_dc) {
 		if (end - start >= dcache_size) {
 			r4k_blast_dcache();
@@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args)
 		protected_blast_icache_range(start, end);
 }
 
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+	struct flush_icache_range_args *fir_args = args;
+	unsigned long start = fir_args->start;
+	unsigned long end = fir_args->end;
+
+	local_r4k_flush_icache_range(start, end);
+}
+
 static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
 	struct flush_icache_range_args args;
@@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
 	instruction_hazard();
 }
 
@@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void)
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
+	local_flush_icache_range	= local_r4k_flush_icache_range;
 
 #if defined(CONFIG_DMA_NONCOHERENT)
 	if (coherentio) {

arch/mips/mm/c-tx39.c

@@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range	= (void *) tx39h_flush_icache_all;
 		flush_cache_page	= (void *) tx39h_flush_icache_all;
 		flush_icache_range	= (void *) tx39h_flush_icache_all;
+		local_flush_icache_range = (void *) tx39h_flush_icache_all;
 
 		flush_cache_sigtramp	= (void *) tx39h_flush_icache_all;
 		local_flush_data_cache_page	= (void *) tx39h_flush_icache_all;
@@ -390,6 +391,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range = tx39_flush_cache_range;
 		flush_cache_page = tx39_flush_cache_page;
 		flush_icache_range = tx39_flush_icache_range;
+		local_flush_icache_range = tx39_flush_icache_range;
 
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;

arch/mips/mm/cache.c

@@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);

arch/mips/mm/tlbex.c

@@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void)
 
 void __cpuinit flush_tlb_handlers(void)
 {
-	flush_icache_range((unsigned long)handle_tlbl,
+	local_flush_icache_range((unsigned long)handle_tlbl,
 			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
-	flush_icache_range((unsigned long)handle_tlbs,
+	local_flush_icache_range((unsigned long)handle_tlbs,
 			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
-	flush_icache_range((unsigned long)handle_tlbm,
+	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
 }

arch/mips/sgi-ip22/ip22-platform.c

@@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void)
 		return res;
 
 	/* Second HPC is missing? */
-	if (!ip22_is_fullhouse() ||
+	if (ip22_is_fullhouse() ||
 	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 

arch/mips/txx9/generic/setup.c

@@ -53,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
 		txx9_ce_res[i].name = txx9_ce_res_name[i];
 	}
 
+	txx9_pcode = pcode;
 	sprintf(txx9_pcode_str, "TX%x", pcode);
 	if (base) {
 		txx9_reg_res.start = base & 0xfffffffffULL;

arch/parisc/kernel/module.c

@@ -47,7 +47,9 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 
+#include <asm/sections.h>
 #include <asm/unwind.h>
 
 #if 0
@@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod)
 	deregister_unwind_table(mod);
 	module_bug_cleanup(mod);
 }
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+	Elf64_Fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->addr, p))
+		ptr = p;
+	return ptr;
+}
+#endif

arch/powerpc/Makefile

@@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y)
 KBUILD_CFLAGS		+= -mcpu=powerpc
 endif
 
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS		+= -mno-sched-epilog
+endif
+
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec

arch/powerpc/boot/Makefile

@@ -49,7 +49,7 @@ zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c

arch/powerpc/include/asm/pgtable-ppc64.h

@@ -153,12 +153,10 @@
 #define __S110	PAGE_SHARED_X
 #define __S111	PAGE_SHARED_X
 
-#ifdef CONFIG_HUGETLB_PAGE
-
+#ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
+#endif /* CONFIG_PPC_MM_SLICES */
 
 #ifndef __ASSEMBLY__
 

arch/powerpc/include/asm/sections.h

@@ -16,6 +16,9 @@ static inline int in_kernel_text(unsigned long addr)
 	return 0;
 }
 
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
 #endif
 
 #endif /* __KERNEL__ */

arch/powerpc/kernel/Makefile

@@ -14,12 +14,13 @@ endif
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
 
 ifdef CONFIG_DYNAMIC_FTRACE
 # dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
 endif
 
 endif

arch/powerpc/kernel/align.c

@@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 		       unsigned int flags, unsigned int length)
 {
 	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int ret;
+	int ret = 0;
 
 	flush_vsx_to_thread(current);
 

arch/powerpc/kernel/idle_6xx.S

@@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r11,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else

arch/powerpc/kernel/idle_e500.S

@@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r1,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
 #endif
+
 	b	transfer_to_handler_cont

arch/powerpc/kernel/module_64.c

@@ -21,8 +21,9 @@
 #include <linux/err.h>
 #include <linux/vmalloc.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 #include <asm/module.h>
-#include <asm/uaccess.h>
+#include <asm/sections.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
@@ -451,3 +452,13 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
+
+void *dereference_function_descriptor(void *ptr)
+{
+	struct ppc64_opd_entry *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->funcaddr, p))
+		ptr = p;
+	return ptr;
+}

arch/powerpc/kernel/vmlinux.lds.S

@@ -66,11 +66,12 @@ SECTIONS
 		__got2_end = .;
 #endif /* CONFIG_PPC32 */
 
-		. = ALIGN(PAGE_SIZE);
-		_etext = .;
-		PROVIDE32 (etext = .);
 	} :kernel
 
+	. = ALIGN(PAGE_SIZE);
+	_etext = .;
+	PROVIDE32 (etext = .);
+
 	/* Read-only data */
 	RODATA
 

arch/powerpc/mm/hash_utils_64.c

@@ -191,12 +191,17 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
 		unsigned long va = hpt_va(vaddr, vsid, ssize);
+		unsigned long tprot = prot;
+
+		/* Make kernel text executable */
+		if (in_kernel_text(vaddr))
+			tprot &= ~HPTE_R_N;
 
 		hash = hpt_hash(va, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr, prot,
+		ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
 					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
@@ -584,7 +589,7 @@ void __init htab_initialize(void)
 {
 	unsigned long table;
 	unsigned long pteg_count;
-	unsigned long prot, tprot;
+	unsigned long prot;
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
@@ -660,10 +665,9 @@ void __init htab_initialize(void)
 	for (i=0; i < lmb.memory.cnt; i++) {
 		base = (unsigned long)__va(lmb.memory.region[i].base);
 		size = lmb.memory.region[i].size;
-		tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0);
 
 		DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
-		    base, size, tprot);
+		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
@@ -680,21 +684,21 @@ void __init htab_initialize(void)
 			unsigned long dart_table_end = dart_tablebase + 16 * MB;
 			if (base != dart_tablebase)
 				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
-							__pa(base), tprot,
+							__pa(base), prot,
 							mmu_linear_psize,
 							mmu_kernel_ssize));
 			if ((base + size) > dart_table_end)
 				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
 							base + size,
 							__pa(dart_table_end),
-							 tprot,
+							 prot,
 							 mmu_linear_psize,
 							 mmu_kernel_ssize));
 			continue;
 		}
 #endif /* CONFIG_U3_DART */
 		BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
-				tprot, mmu_linear_psize, mmu_kernel_ssize));
+				prot, mmu_linear_psize, mmu_kernel_ssize));
        }
 
 	/*

arch/powerpc/platforms/cell/spufs/sched.c

@@ -643,9 +643,10 @@ static struct spu *find_victim(struct spu_context *ctx)
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
 			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
-				get_spu_context(victim);
 			}
 		}
+		if (victim)
+			get_spu_context(victim);
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
 		if (victim) {
@@ -727,17 +728,33 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	/* not a candidate for interruptible because it's called either
 	   from the scheduler thread or from spu_deactivate */
 	mutex_lock(&ctx->state_mutex);
-	__spu_schedule(spu, ctx);
+	if (ctx->state == SPU_STATE_SAVED)
+		__spu_schedule(spu, ctx);
 	spu_release(ctx);
 }
 
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu:	The SPU to unschedule from
+ * @ctx:	The context currently scheduled on the SPU
+ * @free_spu	Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+		int free_spu)
 {
 	int node = spu->node;
 
 	mutex_lock(&cbe_spu_info[node].list_mutex);
 	cbe_spu_info[node].nr_active--;
-	spu->alloc_state = SPU_FREE;
+	if (free_spu)
+		spu->alloc_state = SPU_FREE;
 	spu_unbind_context(spu, ctx);
 	ctx->stats.invol_ctx_switch++;
 	spu->stats.invol_ctx_switch++;
@@ -837,7 +854,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
 	if (spu) {
 		new = grab_runnable_context(max_prio, spu->node);
 		if (new || force) {
-			spu_unschedule(spu, ctx);
+			spu_unschedule(spu, ctx, new == NULL);
 			if (new) {
 				if (new->flags & SPU_CREATE_NOSCHED)
 					wake_up(&new->stop_wq);
@@ -910,7 +927,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
-		spu_unschedule(spu, ctx);
+		spu_unschedule(spu, ctx, 0);
 		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {

arch/powerpc/platforms/powermac/Makefile

@@ -2,7 +2,7 @@ CFLAGS_bootx_init.o  		+= -fPIC
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
 endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \

arch/s390/kernel/compat_ptrace.h

@@ -42,6 +42,7 @@ struct user_regs_struct32
 	u32 gprs[NUM_GPRS];
 	u32 acrs[NUM_ACRS];
 	u32 orig_gpr2;
+	/* nb: there's a 4-byte hole here */
 	s390_fp_regs fp_regs;
 	/*
 	 * These per registers are in here so that gdb can modify them

arch/s390/kernel/ptrace.c

@@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 */
 		tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/* 
 		 * floating point regs. are stored in the thread structure
@@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		task_pt_regs(child)->orig_gpr2 = data;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent writes of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure
@@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		 */
 		tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
@@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child,
 		 */
 		*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent writess of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 

arch/sh/configs/ap325rxa_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:18:59 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -20,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -58,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -89,6 +88,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -261,9 +261,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -289,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -647,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -690,7 +688,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -854,6 +855,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set

arch/sh/configs/migor_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:44:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -270,6 +271,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -294,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -649,6 +647,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
@@ -709,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -755,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -842,7 +844,10 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems

arch/sh/include/asm/uaccess_64.h

@@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
+extern long __strnlen_user(const char *__s, long __n);
+
 #endif /* __ASM_SH_UACCESS_64_H */

arch/sh/kernel/cpu/sh5/entry.S

@@ -2,7 +2,7 @@
  * arch/sh/kernel/cpu/sh5/entry.S
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2007  Paul Mundt
+ * Copyright (C) 2004 - 2008  Paul Mundt
  * Copyright (C) 2003, 2004  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -923,6 +923,8 @@ ret_from_exception:
 	blink   tr0, ZERO
 
 resume_kernel:
+	CLI()
+
 	pta	restore_all, tr0
 
 	getcon	KCR0, r6
@@ -939,19 +941,11 @@ need_resched:
 	andi	r7, 0xf0, r7
 	bne	r7, ZERO, tr0
 
-	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
-	shori	(PREEMPT_ACTIVE & 65535), r8
-	st.l	r6, TI_PRE_COUNT, r8
-
-	STI()
-	movi	schedule, r7
+	movi	preempt_schedule_irq, r7
 	ori	r7, 1, r7
 	ptabs	r7, tr1
 	blink	tr1, LINK
 
-	st.l	r6, TI_PRE_COUNT, ZERO
-	CLI()
-
 	pta	need_resched, tr1
 	blink	tr1, ZERO
 #endif

arch/sh/kernel/entry-common.S

@@ -92,6 +92,7 @@ ENTRY(ret_from_irq)
 	bra	resume_userspace
 	 nop
 ENTRY(resume_kernel)
+	cli
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -105,28 +106,9 @@ need_resched:
 	and	#0xf0, r0		! interrupts off (exception path)?
 	cmp/eq	#0xf0, r0
 	bt	noresched
-
-	mov.l	1f, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
 	mov.l	3f, r0
-	jsr	@r0
-	 nop
-#endif
-	sti
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-	mov	#0, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
+	jsr	@r0			! call preempt_schedule_irq
 	 nop
-#endif
-
 	bra	need_resched
 	 nop
 
@@ -137,10 +119,7 @@ noresched:
 	.align 2
 1:	.long	PREEMPT_ACTIVE
 2:	.long	schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3:	.long	trace_hardirqs_on
-4:	.long	trace_hardirqs_off
-#endif
+3:	.long	preempt_schedule_irq
 #endif
 
 ENTRY(resume_userspace)

arch/sh/kernel/machine_kexec.c

@@ -102,7 +102,7 @@ void machine_kexec(struct kimage *image)
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
 }
 
 void arch_crash_save_vmcoreinfo(void)

arch/sh/kernel/ptrace_64.c

@@ -131,6 +131,8 @@ void user_enable_single_step(struct task_struct *child)
 
 void user_disable_single_step(struct task_struct *child)
 {
+	struct pt_regs *regs = child->thread.uregs;
+
 	regs->sr &= ~SR_SSTEP;
 }
 

arch/sh/kernel/setup.c

@@ -171,6 +171,7 @@ static void __init reserve_crashkernel(void)
 				(unsigned long)(free_mem >> 20));
 		crashk_res.start = crash_base;
 		crashk_res.end   = crash_base + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_res);
 	}
 }
 #else
@@ -204,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
 
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end)
-		request_resource(res, &crashk_res);
-#endif
-
 	add_active_range(nid, start_pfn, end_pfn);
 }
 

arch/sh/kernel/sys_sh.c

@@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
-	if (call <= SEMCTL)
+	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
 			return sys_semtimedop(first,

arch/sh/mm/consistent.c

@@ -101,7 +101,7 @@ static int __init memchunk_setup(char *str)
 }
 __setup("memchunk.", memchunk_setup);
 
-static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
 {
 	char *p = boot_command_line;
 	int k = strlen(name);
@@ -118,8 +118,8 @@ static void memchunk_cmdline_override(char *name, unsigned long *sizep)
 	}
 }
 
-int platform_resource_setup_memory(struct platform_device *pdev,
-				   char *name, unsigned long memsize)
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+					  char *name, unsigned long memsize)
 {
 	struct resource *r;
 	dma_addr_t dma_handle;

arch/sparc64/kernel/irq.c

@@ -792,6 +792,8 @@ void fixup_irqs(void)
 		}
 		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
 	}
+
+	tick_ops->disable_irq();
 }
 #endif
 

arch/sparc64/kernel/smp.c

@@ -80,8 +80,6 @@ void smp_bogo(struct seq_file *m)
 			   i, cpu_data(i).clock_tick);
 }
 
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
 extern void setup_sparc64_timer(void);
 
 static volatile unsigned long callin_flag = 0;
@@ -120,9 +118,9 @@ void __cpuinit smp_callin(void)
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpuid, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
@@ -1305,10 +1303,6 @@ int __cpu_disable(void)
 	c->core_id = 0;
 	c->proc_id = -1;
 
-	spin_lock(&call_lock);
-	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
 	smp_wmb();
 
 	/* Make sure no interrupts point to this cpu.  */
@@ -1318,6 +1312,10 @@ int __cpu_disable(void)
 	mdelay(1);
 	local_irq_disable();
 
+	ipi_call_lock();
+	cpu_clear(cpu, cpu_online_map);
+	ipi_call_unlock();
+
 	return 0;
 }
 

arch/x86/Kconfig.cpu

@@ -382,14 +382,17 @@ config X86_OOSTORE
 # P6_NOPs are a relatively minor optimization that require a family >=
 # 6 processor, except that it is broken on certain VIA chips.
 # Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs).  As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs).  In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
 #
 config X86_P6_NOP
 	def_bool y
-	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+	depends on X86_64
+	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
 config X86_TSC
 	def_bool y

arch/x86/boot/cpucheck.c

@@ -38,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
 {
 	REQUIRED_MASK0,
 	REQUIRED_MASK1,
-	REQUIRED_MASK2,
-	REQUIRED_MASK3,
+	0, /* REQUIRED_MASK2 not implemented in this file */
+	0, /* REQUIRED_MASK3 not implemented in this file */
 	REQUIRED_MASK4,
-	REQUIRED_MASK5,
+	0, /* REQUIRED_MASK5 not implemented in this file */
 	REQUIRED_MASK6,
-	REQUIRED_MASK7,
+	0, /* REQUIRED_MASK7 not implemented in this file */
 };
 
 #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))

arch/x86/kernel/alternative.c

@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 extern char __vsyscall_0;
 const unsigned char *const *find_nop_table(void)
 {
-	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
-	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return k8_nops;
 }
 
 #else /* CONFIG_X86_64 */
 
-static const struct nop {
-	int cpuid;
-	const unsigned char *const *noptable;
-} noptypes[] = {
-	{ X86_FEATURE_K8, k8_nops },
-	{ X86_FEATURE_K7, k7_nops },
-	{ X86_FEATURE_P4, p6_nops },
-	{ X86_FEATURE_P3, p6_nops },
-	{ -1, NULL }
-};
-
 const unsigned char *const *find_nop_table(void)
 {
-	const unsigned char *const *noptable = intel_nops;
-	int i;
-
-	for (i = 0; noptypes[i].cpuid >= 0; i++) {
-		if (boot_cpu_has(noptypes[i].cpuid)) {
-			noptable = noptypes[i].noptable;
-			break;
-		}
-	}
-	return noptable;
+	if (boot_cpu_has(X86_FEATURE_K8))
+		return k8_nops;
+	else if (boot_cpu_has(X86_FEATURE_K7))
+		return k7_nops;
+	else if (boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return intel_nops;
 }
 
 #endif /* CONFIG_X86_64 */

arch/x86/kernel/cpu/amd.c

@@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 		if (c->x86_power & (1<<8))
 			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
+
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86_model == 13 || c->x86_model == 9 ||
+	   (c->x86_model == 8 && c->x86_mask >= 8))
+		set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 						mbytes);
 				}
 
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 				break;
 			}
 

arch/x86/kernel/cpu/centaur.c

@@ -314,6 +314,16 @@ enum {
 		EAMD3D		= 1<<20,
 };
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 5:
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		break;
+	}
+}
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 
@@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
 };

arch/x86/kernel/cpu/common.c

@@ -13,6 +13,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
@@ -334,11 +335,40 @@ static void __init early_cpu_detect(void)
 
 	get_cpu_vendor(c, 1);
 
+	early_get_cap(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
+}
 
-	early_get_cap(c);
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
 }
 
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
@@ -395,8 +425,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		}
 
 		init_scattered_cpuid_features(c);
+		detect_nopl(c);
 	}
-
 }
 
 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)

arch/x86/kernel/cpu/common_64.c

@@ -18,6 +18,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
@@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void)
 	}
 }
 
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
+}
+
 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
 
 void __init early_cpu_init(void)
@@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
+	detect_nopl(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
@@ -493,17 +529,20 @@ void pda_init(int cpu)
 		/* others are initialized in smpboot.c */
 		pda->pcurrent = &init_task;
 		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
 	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu);
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
 
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
@@ -601,19 +640,22 @@ void __cpuinit cpu_init(void)
 	/*
 	 * set up and load the per-CPU TSS
 	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+	if (!orig_ist->ist[0]) {
 		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
 		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu);
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
 		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
 	}
 
 	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);

arch/x86/kernel/cpu/cyrix.c

@@ -15,13 +15,11 @@
 /*
  * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
  */
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
-	unsigned long flags;
 
 	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, ccr3 ^ 0x80);
 	getCx86(0xc0);   /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 		*dir0 = getCx86(CX86_DIR0);
 		*dir1 = getCx86(CX86_DIR1);
 	}
-	local_irq_restore(flags);
 }
 
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__do_cyrix_devid(dir0, dir1);
+	local_irq_restore(flags);
+}
 /*
  * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
  * order to identify the Cyrix CPU model after we're out of setup.c
@@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void)
 	local_irq_restore(flags);
 }
 
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir1 = 0;
+
+	__do_cyrix_devid(&dir0, &dir1);
+	dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+
+	switch (dir0_msn) {
+	case 3: /* 6x86/6x86L */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	case 5: /* 6x86MX/M II */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	}
+}
 
 static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
@@ -416,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
 	.c_ident	= { "CyrixInstead" },
+	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
 };