Merge branch 'acpi-video' into release

Documentation/kernel-parameters.txt

@@ -199,11 +199,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			unusable.  The "log_buf_len" parameter may be useful
 			if you need to capture more output.
 
-	acpi_display_output=	[HW,ACPI]
-			acpi_display_output=vendor
-			acpi_display_output=video
-			See above.
-
 	acpi_irq_balance [HW,ACPI]
 			ACPI will balance active IRQs
 			default in APIC mode

drivers/acpi/video.c

@@ -33,7 +33,6 @@
 #include <linux/input.h>
 #include <linux/backlight.h>
 #include <linux/thermal.h>
-#include <linux/video_output.h>
 #include <linux/sort.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
@@ -172,9 +171,6 @@ struct acpi_video_device_cap {
 	u8 _BQC:1;		/* Get current brightness level */
 	u8 _BCQ:1;		/* Some buggy BIOS uses _BCQ instead of _BQC */
 	u8 _DDC:1;		/*Return the EDID for this device */
-	u8 _DCS:1;		/*Return status of output device */
-	u8 _DGS:1;		/*Query graphics state */
-	u8 _DSS:1;		/*Device state set */
 };
 
 struct acpi_video_brightness_flags {
@@ -202,7 +198,6 @@ struct acpi_video_device {
 	struct acpi_video_device_brightness *brightness;
 	struct backlight_device *backlight;
 	struct thermal_cooling_device *cooling_dev;
-	struct output_device *output_dev;
 };
 
 static const char device_decode[][30] = {
@@ -226,10 +221,6 @@ static int acpi_video_get_next_level(struct acpi_video_device *device,
 				     u32 level_current, u32 event);
 static int acpi_video_switch_brightness(struct acpi_video_device *device,
 					 int event);
-static int acpi_video_device_get_state(struct acpi_video_device *device,
-			    unsigned long long *state);
-static int acpi_video_output_get(struct output_device *od);
-static int acpi_video_device_set_state(struct acpi_video_device *device, int state);
 
 /*backlight device sysfs support*/
 static int acpi_video_get_brightness(struct backlight_device *bd)
@@ -265,30 +256,6 @@ static struct backlight_ops acpi_backlight_ops = {
 	.update_status  = acpi_video_set_brightness,
 };
 
-/*video output device sysfs support*/
-static int acpi_video_output_get(struct output_device *od)
-{
-	unsigned long long state;
-	struct acpi_video_device *vd =
-		(struct acpi_video_device *)dev_get_drvdata(&od->dev);
-	acpi_video_device_get_state(vd, &state);
-	return (int)state;
-}
-
-static int acpi_video_output_set(struct output_device *od)
-{
-	unsigned long state = od->request_state;
-	struct acpi_video_device *vd=
-		(struct acpi_video_device *)dev_get_drvdata(&od->dev);
-	return acpi_video_device_set_state(vd, state);
-}
-
-static struct output_properties acpi_output_properties = {
-	.set_state = acpi_video_output_set,
-	.get_status = acpi_video_output_get,
-};
-
-
 /* thermal cooling device callbacks */
 static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned
 			       long *state)
@@ -344,34 +311,6 @@ static struct thermal_cooling_device_ops video_cooling_ops = {
                                Video Management
    -------------------------------------------------------------------------- */
 
-/* device */
-
-static int
-acpi_video_device_get_state(struct acpi_video_device *device,
-			    unsigned long long *state)
-{
-	int status;
-
-	status = acpi_evaluate_integer(device->dev->handle, "_DCS", NULL, state);
-
-	return status;
-}
-
-static int
-acpi_video_device_set_state(struct acpi_video_device *device, int state)
-{
-	int status;
-	union acpi_object arg0 = { ACPI_TYPE_INTEGER };
-	struct acpi_object_list args = { 1, &arg0 };
-	unsigned long long ret;
-
-
-	arg0.integer.value = state;
-	status = acpi_evaluate_integer(device->dev->handle, "_DSS", &args, &ret);
-
-	return status;
-}
-
 static int
 acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
 				   union acpi_object **levels)
@@ -831,15 +770,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) {
 		device->cap._DDC = 1;
 	}
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DCS", &h_dummy1))) {
-		device->cap._DCS = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DGS", &h_dummy1))) {
-		device->cap._DGS = 1;
-	}
-	if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DSS", &h_dummy1))) {
-		device->cap._DSS = 1;
-	}
 
 	if (acpi_video_backlight_support()) {
 		struct backlight_properties props;
@@ -904,21 +834,6 @@ static void acpi_video_device_find_cap(struct acpi_video_device *device)
 			printk(KERN_ERR PREFIX "Create sysfs link\n");
 
 	}
-
-	if (acpi_video_display_switch_support()) {
-
-		if (device->cap._DCS && device->cap._DSS) {
-			static int count;
-			char *name;
-			name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
-			if (!name)
-				return;
-			count++;
-			device->output_dev = video_output_register(name,
-					NULL, device, &acpi_output_properties);
-			kfree(name);
-		}
-	}
 }
 
 /*
@@ -1360,6 +1275,9 @@ int acpi_video_get_edid(struct acpi_device *device, int type, int device_id,
 		if (!video_device)
 			continue;
 
+		if (!video_device->cap._DDC)
+			continue;
+
 		if (type) {
 			switch (type) {
 			case ACPI_VIDEO_DISPLAY_CRT:
@@ -1452,7 +1370,6 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
 		thermal_cooling_device_unregister(device->cooling_dev);
 		device->cooling_dev = NULL;
 	}
-	video_output_unregister(device->output_dev);
 
 	return 0;
 }

drivers/acpi/video_detect.c

@@ -17,15 +17,14 @@
  * capabilities the graphics cards plugged in support. The check for general
  * video capabilities will be triggered by the first caller of
  * acpi_video_get_capabilities(NULL); which will happen when the first
- * backlight (or display output) switching supporting driver calls:
+ * backlight switching supporting driver calls:
  * acpi_video_backlight_support();
  *
  * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
  * are available, video.ko should be used to handle the device.
  *
  * Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
- * sony_acpi,... can take care about backlight brightness and display output
- * switching.
+ * sony_acpi,... can take care about backlight brightness.
  *
  * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
  * this file will not be compiled, acpi_video_get_capabilities() and
@@ -83,11 +82,6 @@ long acpi_is_video_device(struct acpi_device *device)
 	if (!device)
 		return 0;
 
-	/* Is this device able to support video switching ? */
-	if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
-	    ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
-		video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
-
 	/* Is this device able to retrieve a video ROM ? */
 	if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
 		video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
@@ -161,8 +155,6 @@ long acpi_video_get_capabilities(acpi_handle graphics_handle)
 		 *
 		 *   if (dmi_name_in_vendors("XY")) {
 		 *	acpi_video_support |=
-		 *		ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR;
-		 *	acpi_video_support |=
 		 *		ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
 		 *}
 		 */
@@ -212,33 +204,8 @@ int acpi_video_backlight_support(void)
 EXPORT_SYMBOL(acpi_video_backlight_support);
 
 /*
- * Returns true if video.ko can do display output switching.
- * This does not work well/at all with binary graphics drivers
- * which disable system io ranges and do it on their own.
- */
-int acpi_video_display_switch_support(void)
-{
-	if (!acpi_video_caps_checked)
-		acpi_video_get_capabilities(NULL);
-
-	if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR)
-		return 0;
-	else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO)
-		return 1;
-
-	if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR)
-		return 0;
-	else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO)
-		return 1;
-
-	return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING;
-}
-EXPORT_SYMBOL(acpi_video_display_switch_support);
-
-/*
- * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video
- * To force that backlight or display output switching is processed by vendor
- * specific acpi drivers or video.ko driver.
+ * Use acpi_backlight=vendor/video to force that backlight switching
+ * is processed by vendor specific acpi drivers or video.ko driver.
  */
 static int __init acpi_backlight(char *str)
 {
@@ -255,19 +222,3 @@ static int __init acpi_backlight(char *str)
 	return 1;
 }
 __setup("acpi_backlight=", acpi_backlight);
-
-static int __init acpi_display_output(char *str)
-{
-	if (str == NULL || *str == '\0')
-		return 1;
-	else {
-		if (!strcmp("vendor", str))
-			acpi_video_support |=
-				ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR;
-		if (!strcmp("video", str))
-			acpi_video_support |=
-				ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
-	}
-	return 1;
-}
-__setup("acpi_display_output=", acpi_display_output);

drivers/gpu/drm/Kconfig

@@ -107,7 +107,6 @@ config DRM_I915
 	select FB_CFB_IMAGEBLIT
 	# i915 depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
-	select VIDEO_OUTPUT_CONTROL if ACPI
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI

drivers/gpu/stub/Kconfig

@@ -3,7 +3,6 @@ config STUB_POULSBO
 	depends on PCI
 	# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
 	# but for select to work, need to select ACPI_VIDEO's dependencies, ick
-	select VIDEO_OUTPUT_CONTROL if ACPI
 	select BACKLIGHT_CLASS_DEVICE if ACPI
 	select INPUT if ACPI
 	select ACPI_VIDEO if ACPI