mmc: Add MMC_PROGRESS_*

This is my second attempt to make this enum generally available.
The first attempt added MMCIF_PROGRESS_* to include/linux/mmc/sh_mmcif.h.
However this is not sufficiently generic as the enum will be
used by SDHI boot code.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/arm/boot/compressed/mmcif-sh7372.c

@@ -10,6 +10,7 @@
  */
 
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/boot.h>
 #include <mach/mmc.h>
 
 #define MMCIF_BASE      (void __iomem *)0xe6bd0000
@@ -42,7 +43,7 @@
 asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
 {
 	mmc_init_progress();
-	mmc_update_progress(MMCIF_PROGRESS_ENTER);
+	mmc_update_progress(MMC_PROGRESS_ENTER);
 
 	/* Initialise MMC
 	 * registers: PORT84CR-PORT92CR
@@ -68,12 +69,12 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
 	/* Enable clock to MMC hardware block */
 	__raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 12), SMSTPCR3);
 
-	mmc_update_progress(MMCIF_PROGRESS_INIT);
+	mmc_update_progress(MMC_PROGRESS_INIT);
 
 	/* setup MMCIF hardware */
 	sh_mmcif_boot_init(MMCIF_BASE);
 
-	mmc_update_progress(MMCIF_PROGRESS_LOAD);
+	mmc_update_progress(MMC_PROGRESS_LOAD);
 
 	/* load kernel via MMCIF interface */
 	sh_mmcif_boot_do_read(MMCIF_BASE, 2, /* Kernel is at block 2 */
@@ -83,5 +84,5 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
 	/* Disable clock to MMC hardware block */
 	__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
 
-	mmc_update_progress(MMCIF_PROGRESS_DONE);
+	mmc_update_progress(MMC_PROGRESS_DONE);
 }

arch/sh/boot/romimage/mmcif-sh7724.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/boot.h>
 #include <mach/romimage.h>
 
 #define MMCIF_BASE      (void __iomem *)0xa4ca0000
@@ -29,7 +30,7 @@
  */
 asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
 {
-	mmcif_update_progress(MMCIF_PROGRESS_ENTER);
+	mmcif_update_progress(MMC_PROGRESS_ENTER);
 
 	/* enable clock to the MMCIF hardware block */
 	__raw_writel(__raw_readl(MSTPCR2) & ~0x20000000, MSTPCR2);
@@ -52,12 +53,12 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
 	/* high drive capability for MMC pins */
 	__raw_writew(__raw_readw(DRVCRA) | 0x3000, DRVCRA);
 
-	mmcif_update_progress(MMCIF_PROGRESS_INIT);
+	mmcif_update_progress(MMC_PROGRESS_INIT);
 
 	/* setup MMCIF hardware */
 	sh_mmcif_boot_init(MMCIF_BASE);
 
-	mmcif_update_progress(MMCIF_PROGRESS_LOAD);
+	mmcif_update_progress(MMC_PROGRESS_LOAD);
 
 	/* load kernel via MMCIF interface */
 	sh_mmcif_boot_do_read(MMCIF_BASE, 512,
@@ -67,5 +68,5 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long no_bytes)
 	/* disable clock to the MMCIF hardware block */
 	__raw_writel(__raw_readl(MSTPCR2) | 0x20000000, MSTPCR2);
 
-	mmcif_update_progress(MMCIF_PROGRESS_DONE);
+	mmcif_update_progress(MMC_PROGRESS_DONE);
 }

include/linux/mmc/boot.h

@@ -0,0 +1,7 @@
+#ifndef MMC_BOOT_H
+#define MMC_BOOT_H
+
+enum { MMC_PROGRESS_ENTER, MMC_PROGRESS_INIT,
+       MMC_PROGRESS_LOAD, MMC_PROGRESS_DONE };
+
+#endif

include/linux/mmc/sh_mmcif.h

@@ -104,9 +104,6 @@ static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val)
 
 #define SH_MMCIF_BBS 512 /* boot block size */
 
-enum { MMCIF_PROGRESS_ENTER, MMCIF_PROGRESS_INIT,
-       MMCIF_PROGRESS_LOAD, MMCIF_PROGRESS_DONE };
-
 static inline void sh_mmcif_boot_cmd_send(void __iomem *base,
 					  unsigned long cmd, unsigned long arg)
 {