ASoC: add DAI platform ssi driver for MXC

This adds support for DAI platform for the SSI present in MXC platforms.

It currently does not support i.MX3, the only thing necessary to do
this is to export DMA data for i.MX3 interface which I haven't done
because I don't have a i.MX3 based board available.

It has been tested on i.MX27 board.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/imx/Kconfig

@@ -6,6 +6,8 @@ config SND_MX1_MX2_SOC
 	  Say Y or M if you want to add support for codecs attached to
 	  the MX1 or MX2 SSI interface.
 
+config SND_MXC_SOC_SSI
+	tristate
 
 
 

sound/soc/imx/Makefile

@@ -1,4 +1,6 @@
 # i.MX Platform Support
 snd-soc-mx1_mx2-objs := mx1_mx2-pcm.o
+snd-soc-mxc-ssi-objs := mxc-ssi.o
 
 obj-$(CONFIG_SND_MX1_MX2_SOC) += snd-soc-mx1_mx2.o
+obj-$(CONFIG_SND_MXC_SOC_SSI) += snd-soc-mxc-ssi.o

sound/soc/imx/mxc-ssi.c

@@ -0,0 +1,868 @@
+/*
+ * mxc-ssi.c  --  SSI driver for Freescale IMX
+ *
+ * Copyright 2006 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood
+ *         liam.girdwood@wolfsonmicro.com or linux@wolfsonmicro.com
+ *
+ *  Based on mxc-alsa-mc13783 (C) 2006 Freescale.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * TODO:
+ *   Need to rework SSI register defs when new defs go into mainline.
+ *   Add support for TDM and FIFO 1.
+ *   Add support for i.mx3x DMA interface.
+ *
+ */
+
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <mach/dma-mx1-mx2.h>
+#include <asm/mach-types.h>
+
+#include "mxc-ssi.h"
+#include "mx1_mx2-pcm.h"
+
+#define SSI1_PORT	0
+#define SSI2_PORT	1
+
+static int ssi_active[2] = {0, 0};
+
+/* DMA information for mx1_mx2 platforms */
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out0 = {
+	.name			= "SSI1 PCM Stereo out 0",
+	.transfer_type = DMA_MODE_WRITE,
+	.per_address = SSI1_BASE_ADDR + STX0,
+	.event_id = DMA_REQ_SSI1_TX0,
+	.watermark_level = TXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_out1 = {
+	.name			= "SSI1 PCM Stereo out 1",
+	.transfer_type = DMA_MODE_WRITE,
+	.per_address = SSI1_BASE_ADDR + STX1,
+	.event_id = DMA_REQ_SSI1_TX1,
+	.watermark_level = TXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in0 = {
+	.name			= "SSI1 PCM Stereo in 0",
+	.transfer_type = DMA_MODE_READ,
+	.per_address = SSI1_BASE_ADDR + SRX0,
+	.event_id = DMA_REQ_SSI1_RX0,
+	.watermark_level = RXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi1_pcm_stereo_in1 = {
+	.name			= "SSI1 PCM Stereo in 1",
+	.transfer_type = DMA_MODE_READ,
+	.per_address = SSI1_BASE_ADDR + SRX1,
+	.event_id = DMA_REQ_SSI1_RX1,
+	.watermark_level = RXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out0 = {
+	.name			= "SSI2 PCM Stereo out 0",
+	.transfer_type = DMA_MODE_WRITE,
+	.per_address = SSI2_BASE_ADDR + STX0,
+	.event_id = DMA_REQ_SSI2_TX0,
+	.watermark_level = TXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_out1 = {
+	.name			= "SSI2 PCM Stereo out 1",
+	.transfer_type = DMA_MODE_WRITE,
+	.per_address = SSI2_BASE_ADDR + STX1,
+	.event_id = DMA_REQ_SSI2_TX1,
+	.watermark_level = TXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in0 = {
+	.name			= "SSI2 PCM Stereo in 0",
+	.transfer_type = DMA_MODE_READ,
+	.per_address = SSI2_BASE_ADDR + SRX0,
+	.event_id = DMA_REQ_SSI2_RX0,
+	.watermark_level = RXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct mx1_mx2_pcm_dma_params imx_ssi2_pcm_stereo_in1 = {
+	.name			= "SSI2 PCM Stereo in 1",
+	.transfer_type = DMA_MODE_READ,
+	.per_address = SSI2_BASE_ADDR + SRX1,
+	.event_id = DMA_REQ_SSI2_RX1,
+	.watermark_level = RXFIFO_WATERMARK,
+	.per_config = IMX_DMA_MEMSIZE_16 | IMX_DMA_TYPE_FIFO,
+	.mem_config = IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR,
+};
+
+static struct clk *ssi_clk0, *ssi_clk1;
+
+int get_ssi_clk(int ssi, struct device *dev)
+{
+	switch (ssi) {
+	case 0:
+		ssi_clk0 = clk_get(dev, "ssi1");
+		if (IS_ERR(ssi_clk0))
+			return PTR_ERR(ssi_clk0);
+		return 0;
+	case 1:
+		ssi_clk1 = clk_get(dev, "ssi2");
+		if (IS_ERR(ssi_clk1))
+			return PTR_ERR(ssi_clk1);
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+EXPORT_SYMBOL(get_ssi_clk);
+
+void put_ssi_clk(int ssi)
+{
+	switch (ssi) {
+	case 0:
+		clk_put(ssi_clk0);
+		ssi_clk0 = NULL;
+		break;
+	case 1:
+		clk_put(ssi_clk1);
+		ssi_clk1 = NULL;
+		break;
+	}
+}
+EXPORT_SYMBOL(put_ssi_clk);
+
+/*
+ * SSI system clock configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
+	int clk_id, unsigned int freq, int dir)
+{
+	u32 scr;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		scr = SSI1_SCR;
+		pr_debug("%s: SCR for SSI1 is %x\n", __func__, scr);
+	} else {
+		scr = SSI2_SCR;
+		pr_debug("%s: SCR for SSI2 is %x\n", __func__, scr);
+	}
+
+	if (scr & SSI_SCR_SSIEN) {
+		printk(KERN_WARNING "Warning ssi already enabled\n");
+		return 0;
+	}
+
+	switch (clk_id) {
+	case IMX_SSP_SYS_CLK:
+		if (dir == SND_SOC_CLOCK_OUT) {
+			scr |= SSI_SCR_SYS_CLK_EN;
+			pr_debug("%s: clk of is output\n", __func__);
+		} else {
+			scr &= ~SSI_SCR_SYS_CLK_EN;
+			pr_debug("%s: clk of is input\n", __func__);
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		pr_debug("%s: writeback of SSI1_SCR\n", __func__);
+		SSI1_SCR = scr;
+	} else {
+		pr_debug("%s: writeback of SSI2_SCR\n", __func__);
+		SSI2_SCR = scr;
+	}
+
+	return 0;
+}
+
+/*
+ * SSI Clock dividers
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+	int div_id, int div)
+{
+	u32 stccr, srccr;
+
+	pr_debug("%s\n", __func__);
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		if (SSI1_SCR & SSI_SCR_SSIEN)
+			return 0;
+		srccr = SSI1_STCCR;
+		stccr = SSI1_STCCR;
+	} else {
+		if (SSI2_SCR & SSI_SCR_SSIEN)
+			return 0;
+		srccr = SSI2_STCCR;
+		stccr = SSI2_STCCR;
+	}
+
+	switch (div_id) {
+	case IMX_SSI_TX_DIV_2:
+		stccr &= ~SSI_STCCR_DIV2;
+		stccr |= div;
+		break;
+	case IMX_SSI_TX_DIV_PSR:
+		stccr &= ~SSI_STCCR_PSR;
+		stccr |= div;
+		break;
+	case IMX_SSI_TX_DIV_PM:
+		stccr &= ~0xff;
+		stccr |= SSI_STCCR_PM(div);
+		break;
+	case IMX_SSI_RX_DIV_2:
+		stccr &= ~SSI_STCCR_DIV2;
+		stccr |= div;
+		break;
+	case IMX_SSI_RX_DIV_PSR:
+		stccr &= ~SSI_STCCR_PSR;
+		stccr |= div;
+		break;
+	case IMX_SSI_RX_DIV_PM:
+		stccr &= ~0xff;
+		stccr |= SSI_STCCR_PM(div);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		SSI1_STCCR = stccr;
+		SSI1_SRCCR = srccr;
+	} else {
+		SSI2_STCCR = stccr;
+		SSI2_SRCCR = srccr;
+	}
+	return 0;
+}
+
+/*
+ * SSI Network Mode or TDM slots configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ */
+static int imx_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
+	unsigned int mask, int slots)
+{
+	u32 stmsk, srmsk, stccr;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		if (SSI1_SCR & SSI_SCR_SSIEN) {
+			printk(KERN_WARNING "Warning ssi already enabled\n");
+			return 0;
+		}
+		stccr = SSI1_STCCR;
+	} else {
+		if (SSI2_SCR & SSI_SCR_SSIEN) {
+			printk(KERN_WARNING "Warning ssi already enabled\n");
+			return 0;
+		}
+		stccr = SSI2_STCCR;
+	}
+
+	stmsk = srmsk = mask;
+	stccr &= ~SSI_STCCR_DC_MASK;
+	stccr |= SSI_STCCR_DC(slots - 1);
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		SSI1_STMSK = stmsk;
+		SSI1_SRMSK = srmsk;
+		SSI1_SRCCR = SSI1_STCCR = stccr;
+	} else {
+		SSI2_STMSK = stmsk;
+		SSI2_SRMSK = srmsk;
+		SSI2_SRCCR = SSI2_STCCR = stccr;
+	}
+
+	return 0;
+}
+
+/*
+ * SSI DAI format configuration.
+ * Should only be called when port is inactive (i.e. SSIEN = 0).
+ * Note: We don't use the I2S modes but instead manually configure the
+ * SSI for I2S.
+ */
+static int imx_ssi_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	u32 stcr = 0, srcr = 0, scr;
+
+	/*
+	 * This is done to avoid this function to modify
+	 * previous set values in stcr
+	 */
+	stcr = SSI1_STCR;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+		scr = SSI1_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+	else
+		scr = SSI2_SCR & ~(SSI_SCR_SYN | SSI_SCR_NET);
+
+	if (scr & SSI_SCR_SSIEN) {
+		printk(KERN_WARNING "Warning ssi already enabled\n");
+		return 0;
+	}
+
+	/* DAI mode */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		/* data on rising edge of bclk, frame low 1clk before data */
+		stcr |= SSI_STCR_TFSI | SSI_STCR_TEFS | SSI_STCR_TXBIT0;
+		srcr |= SSI_SRCR_RFSI | SSI_SRCR_REFS | SSI_SRCR_RXBIT0;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		/* data on rising edge of bclk, frame high with data */
+		stcr |= SSI_STCR_TXBIT0;
+		srcr |= SSI_SRCR_RXBIT0;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		/* data on rising edge of bclk, frame high with data */
+		stcr |= SSI_STCR_TFSL;
+		srcr |= SSI_SRCR_RFSL;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		/* data on rising edge of bclk, frame high 1clk before data */
+		stcr |= SSI_STCR_TFSL | SSI_STCR_TEFS;
+		srcr |= SSI_SRCR_RFSL | SSI_SRCR_REFS;
+		break;
+	}
+
+	/* DAI clock inversion */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_IB_IF:
+		stcr |= SSI_STCR_TFSI;
+		stcr &= ~SSI_STCR_TSCKP;
+		srcr |= SSI_SRCR_RFSI;
+		srcr &= ~SSI_SRCR_RSCKP;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		stcr &= ~(SSI_STCR_TSCKP | SSI_STCR_TFSI);
+		srcr &= ~(SSI_SRCR_RSCKP | SSI_SRCR_RFSI);
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		stcr |= SSI_STCR_TFSI | SSI_STCR_TSCKP;
+		srcr |= SSI_SRCR_RFSI | SSI_SRCR_RSCKP;
+		break;
+	case SND_SOC_DAIFMT_NB_NF:
+		stcr &= ~SSI_STCR_TFSI;
+		stcr |= SSI_STCR_TSCKP;
+		srcr &= ~SSI_SRCR_RFSI;
+		srcr |= SSI_SRCR_RSCKP;
+		break;
+	}
+
+	/* DAI clock master masks */
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		stcr |= SSI_STCR_TFDIR | SSI_STCR_TXDIR;
+		srcr |= SSI_SRCR_RFDIR | SSI_SRCR_RXDIR;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFS:
+		stcr |= SSI_STCR_TFDIR;
+		srcr |= SSI_SRCR_RFDIR;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+		stcr |= SSI_STCR_TXDIR;
+		srcr |= SSI_SRCR_RXDIR;
+		break;
+	}
+
+	/* sync */
+	if (!(fmt & SND_SOC_DAIFMT_ASYNC))
+		scr |= SSI_SCR_SYN;
+
+	/* tdm - only for stereo atm */
+	if (fmt & SND_SOC_DAIFMT_TDM)
+		scr |= SSI_SCR_NET;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		SSI1_STCR = stcr;
+		SSI1_SRCR = srcr;
+		SSI1_SCR = scr;
+	} else {
+		SSI2_STCR = stcr;
+		SSI2_SRCR = srcr;
+		SSI2_SCR = scr;
+	}
+
+	return 0;
+}
+
+static int imx_ssi_startup(struct snd_pcm_substream *substream,
+			struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		/* set up TX DMA params */
+		switch (cpu_dai->id) {
+		case IMX_DAI_SSI0:
+			cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out0;
+			break;
+		case IMX_DAI_SSI1:
+			cpu_dai->dma_data = &imx_ssi1_pcm_stereo_out1;
+			break;
+		case IMX_DAI_SSI2:
+			cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out0;
+			break;
+		case IMX_DAI_SSI3:
+			cpu_dai->dma_data = &imx_ssi2_pcm_stereo_out1;
+		}
+		pr_debug("%s: (playback)\n", __func__);
+	} else {
+		/* set up RX DMA params */
+		switch (cpu_dai->id) {
+		case IMX_DAI_SSI0:
+			cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in0;
+			break;
+		case IMX_DAI_SSI1:
+			cpu_dai->dma_data = &imx_ssi1_pcm_stereo_in1;
+			break;
+		case IMX_DAI_SSI2:
+			cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in0;
+			break;
+		case IMX_DAI_SSI3:
+			cpu_dai->dma_data = &imx_ssi2_pcm_stereo_in1;
+		}
+		pr_debug("%s: (capture)\n", __func__);
+	}
+
+	/*
+	 * we cant really change any SSI values after SSI is enabled
+	 * need to fix in software for max flexibility - lrg
+	 */
+	if (cpu_dai->active) {
+		printk(KERN_WARNING "Warning ssi already enabled\n");
+		return 0;
+	}
+
+	/* reset the SSI port - Sect 45.4.4 */
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+
+		if (!ssi_clk0)
+			return -EINVAL;
+
+		if (ssi_active[SSI1_PORT]++) {
+			pr_debug("%s: exit before reset\n", __func__);
+			return 0;
+		}
+
+		/* SSI1 Reset */
+		SSI1_SCR = 0;
+
+		SSI1_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+			SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+			SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+			SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+	} else {
+
+		if (!ssi_clk1)
+			return -EINVAL;
+
+		if (ssi_active[SSI2_PORT]++) {
+			pr_debug("%s: exit before reset\n", __func__);
+			return 0;
+		}
+
+		/* SSI2 Reset */
+		SSI2_SCR = 0;
+
+		SSI2_SFCSR = SSI_SFCSR_RFWM1(RXFIFO_WATERMARK) |
+			SSI_SFCSR_RFWM0(RXFIFO_WATERMARK) |
+			SSI_SFCSR_TFWM1(TXFIFO_WATERMARK) |
+			SSI_SFCSR_TFWM0(TXFIFO_WATERMARK);
+	}
+
+	return 0;
+}
+
+int imx_ssi_hw_tx_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	u32 stccr, stcr, sier;
+
+	pr_debug("%s\n", __func__);
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		stccr = SSI1_STCCR & ~SSI_STCCR_WL_MASK;
+		stcr = SSI1_STCR;
+		sier = SSI1_SIER;
+	} else {
+		stccr = SSI2_STCCR & ~SSI_STCCR_WL_MASK;
+		stcr = SSI2_STCR;
+		sier = SSI2_SIER;
+	}
+
+	/* DAI data (word) size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		stccr |= SSI_STCCR_WL(16);
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		stccr |= SSI_STCCR_WL(20);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		stccr |= SSI_STCCR_WL(24);
+		break;
+	}
+
+	/* enable interrupts */
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+		stcr |= SSI_STCR_TFEN0;
+	else
+		stcr |= SSI_STCR_TFEN1;
+	sier |= SSI_SIER_TDMAE;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		SSI1_STCR = stcr;
+		SSI1_STCCR = stccr;
+		SSI1_SIER = sier;
+	} else {
+		SSI2_STCR = stcr;
+		SSI2_STCCR = stccr;
+		SSI2_SIER = sier;
+	}
+
+	return 0;
+}
+
+int imx_ssi_hw_rx_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	u32 srccr, srcr, sier;
+
+	pr_debug("%s\n", __func__);
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		srccr = SSI1_SRCCR & ~SSI_SRCCR_WL_MASK;
+		srcr = SSI1_SRCR;
+		sier = SSI1_SIER;
+	} else {
+		srccr = SSI2_SRCCR & ~SSI_SRCCR_WL_MASK;
+		srcr = SSI2_SRCR;
+		sier = SSI2_SIER;
+	}
+
+	/* DAI data (word) size */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S16_LE:
+		srccr |= SSI_SRCCR_WL(16);
+		break;
+	case SNDRV_PCM_FORMAT_S20_3LE:
+		srccr |= SSI_SRCCR_WL(20);
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		srccr |= SSI_SRCCR_WL(24);
+		break;
+	}
+
+	/* enable interrupts */
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+		srcr |= SSI_SRCR_RFEN0;
+	else
+		srcr |= SSI_SRCR_RFEN1;
+	sier |= SSI_SIER_RDMAE;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		SSI1_SRCR = srcr;
+		SSI1_SRCCR = srccr;
+		SSI1_SIER = sier;
+	} else {
+		SSI2_SRCR = srcr;
+		SSI2_SRCCR = srccr;
+		SSI2_SIER = sier;
+	}
+
+	return 0;
+}
+
+/*
+ * Should only be called when port is inactive (i.e. SSIEN = 0),
+ * although can be called multiple times by upper layers.
+ */
+int imx_ssi_hw_params(struct snd_pcm_substream *substream,
+				struct snd_pcm_hw_params *params,
+				struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+	int ret;
+
+	/* cant change any parameters when SSI is running */
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		if (SSI1_SCR & SSI_SCR_SSIEN) {
+			printk(KERN_WARNING "Warning ssi already enabled\n");
+			return 0;
+		}
+	} else {
+		if (SSI2_SCR & SSI_SCR_SSIEN) {
+			printk(KERN_WARNING "Warning ssi already enabled\n");
+			return 0;
+		}
+	}
+
+	/*
+	 * Configure both tx and rx params with the same settings. This is
+	 * really a harware restriction because SSI must be disabled until
+	 * we can change those values. If there is an active audio stream in
+	 * one direction, enabling the other direction with different
+	 * settings would mean disturbing the running one.
+	 */
+	ret = imx_ssi_hw_tx_params(substream, params);
+	if (ret < 0)
+		return ret;
+	return imx_ssi_hw_rx_params(substream, params);
+}
+
+int imx_ssi_prepare(struct snd_pcm_substream *substream,
+			struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	int ret;
+
+	pr_debug("%s\n", __func__);
+
+	/* Enable clks here to follow SSI recommended init sequence */
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
+		ret = clk_enable(ssi_clk0);
+		if (ret < 0)
+			printk(KERN_ERR "Unable to enable ssi_clk0\n");
+	} else {
+		ret = clk_enable(ssi_clk1);
+		if (ret < 0)
+			printk(KERN_ERR "Unable to enable ssi_clk1\n");
+	}
+
+	return 0;
+}
+
+static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
+			struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+	u32 scr;
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+		scr = SSI1_SCR;
+	else
+		scr = SSI2_SCR;
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			scr |= SSI_SCR_TE | SSI_SCR_SSIEN;
+		else
+			scr |= SSI_SCR_RE | SSI_SCR_SSIEN;
+		break;
+	case SNDRV_PCM_TRIGGER_SUSPEND:
+	case SNDRV_PCM_TRIGGER_STOP:
+	case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
+		if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+			scr &= ~SSI_SCR_TE;
+		else
+			scr &= ~SSI_SCR_RE;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2)
+		SSI1_SCR = scr;
+	else
+		SSI2_SCR = scr;
+
+	return 0;
+}
+
+static void imx_ssi_shutdown(struct snd_pcm_substream *substream,
+			struct snd_soc_dai *dai)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+
+	/* shutdown SSI if neither Tx or Rx is active */
+	if (!cpu_dai->active) {
+
+		if (cpu_dai->id == IMX_DAI_SSI0 ||
+			cpu_dai->id == IMX_DAI_SSI2) {
+
+			if (--ssi_active[SSI1_PORT] > 1)
+				return;
+
+			SSI1_SCR = 0;
+			clk_disable(ssi_clk0);
+		} else {
+			if (--ssi_active[SSI2_PORT])
+				return;
+			SSI2_SCR = 0;
+			clk_disable(ssi_clk1);
+		}
+	}
+}
+
+#ifdef CONFIG_PM
+static int imx_ssi_suspend(struct platform_device *dev,
+	struct snd_soc_dai *dai)
+{
+	return 0;
+}
+
+static int imx_ssi_resume(struct platform_device *pdev,
+	struct snd_soc_dai *dai)
+{
+	return 0;
+}
+
+#else
+#define imx_ssi_suspend	NULL
+#define imx_ssi_resume	NULL
+#endif
+
+#define IMX_SSI_RATES \
+	(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | \
+	SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
+	SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
+	SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | \
+	SNDRV_PCM_RATE_96000)
+
+#define IMX_SSI_BITS \
+	(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
+	SNDRV_PCM_FMTBIT_S24_LE)
+
+static struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
+	.startup = imx_ssi_startup,
+	.shutdown = imx_ssi_shutdown,
+	.trigger = imx_ssi_trigger,
+	.prepare = imx_ssi_prepare,
+	.hw_params = imx_ssi_hw_params,
+	.set_sysclk = imx_ssi_set_dai_sysclk,
+	.set_clkdiv = imx_ssi_set_dai_clkdiv,
+	.set_fmt = imx_ssi_set_dai_fmt,
+	.set_tdm_slot = imx_ssi_set_dai_tdm_slot,
+};
+
+struct snd_soc_dai imx_ssi_pcm_dai[] = {
+{
+	.name = "imx-i2s-1-0",
+	.id = IMX_DAI_SSI0,
+	.suspend = imx_ssi_suspend,
+	.resume = imx_ssi_resume,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.ops = &imx_ssi_pcm_dai_ops,
+},
+{
+	.name = "imx-i2s-2-0",
+	.id = IMX_DAI_SSI1,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.ops = &imx_ssi_pcm_dai_ops,
+},
+{
+	.name = "imx-i2s-1-1",
+	.id = IMX_DAI_SSI2,
+	.suspend = imx_ssi_suspend,
+	.resume = imx_ssi_resume,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.ops = &imx_ssi_pcm_dai_ops,
+},
+{
+	.name = "imx-i2s-2-1",
+	.id = IMX_DAI_SSI3,
+	.playback = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.capture = {
+		.channels_min = 1,
+		.channels_max = 2,
+		.formats = IMX_SSI_BITS,
+		.rates = IMX_SSI_RATES,},
+	.ops = &imx_ssi_pcm_dai_ops,
+},
+};
+EXPORT_SYMBOL_GPL(imx_ssi_pcm_dai);
+
+static int __init imx_ssi_init(void)
+{
+	return snd_soc_register_dais(imx_ssi_pcm_dai,
+				ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+static void __exit imx_ssi_exit(void)
+{
+	snd_soc_unregister_dais(imx_ssi_pcm_dai,
+				ARRAY_SIZE(imx_ssi_pcm_dai));
+}
+
+module_init(imx_ssi_init);
+module_exit(imx_ssi_exit);
+MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com");
+MODULE_DESCRIPTION("i.MX ASoC I2S driver");
+MODULE_LICENSE("GPL");

sound/soc/imx/mxc-ssi.h

@@ -0,0 +1,238 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IMX_SSI_H
+#define _IMX_SSI_H
+
+#include <mach/hardware.h>
+
+/* SSI regs definition - MOVE to /arch/arm/plat-mxc/include/mach/ when stable */
+#define SSI1_IO_BASE_ADDR	IO_ADDRESS(SSI1_BASE_ADDR)
+#define SSI2_IO_BASE_ADDR	IO_ADDRESS(SSI2_BASE_ADDR)
+
+#define STX0   0x00
+#define STX1   0x04
+#define SRX0   0x08
+#define SRX1   0x0c
+#define SCR    0x10
+#define SISR   0x14
+#define SIER   0x18
+#define STCR   0x1c
+#define SRCR   0x20
+#define STCCR  0x24
+#define SRCCR  0x28
+#define SFCSR  0x2c
+#define STR    0x30
+#define SOR    0x34
+#define SACNT  0x38
+#define SACADD 0x3c
+#define SACDAT 0x40
+#define SATAG  0x44
+#define STMSK  0x48
+#define SRMSK  0x4c
+
+#define SSI1_STX0	(*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX0)))
+#define SSI1_STX1   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STX1)))
+#define SSI1_SRX0   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX0)))
+#define SSI1_SRX1   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRX1)))
+#define SSI1_SCR    (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SCR)))
+#define SSI1_SISR   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SISR)))
+#define SSI1_SIER   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SIER)))
+#define SSI1_STCR   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCR)))
+#define SSI1_SRCR   (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCR)))
+#define SSI1_STCCR  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STCCR)))
+#define SSI1_SRCCR  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRCCR)))
+#define SSI1_SFCSR  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SFCSR)))
+#define SSI1_STR    (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STR)))
+#define SSI1_SOR    (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SOR)))
+#define SSI1_SACNT  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACNT)))
+#define SSI1_SACADD (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACADD)))
+#define SSI1_SACDAT (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SACDAT)))
+#define SSI1_SATAG  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SATAG)))
+#define SSI1_STMSK  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + STMSK)))
+#define SSI1_SRMSK  (*((volatile u32 *)(SSI1_IO_BASE_ADDR + SRMSK)))
+
+
+#define SSI2_STX0	(*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX0)))
+#define SSI2_STX1   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STX1)))
+#define SSI2_SRX0   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX0)))
+#define SSI2_SRX1   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRX1)))
+#define SSI2_SCR    (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SCR)))
+#define SSI2_SISR   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SISR)))
+#define SSI2_SIER   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SIER)))
+#define SSI2_STCR   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCR)))
+#define SSI2_SRCR   (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCR)))
+#define SSI2_STCCR  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STCCR)))
+#define SSI2_SRCCR  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRCCR)))
+#define SSI2_SFCSR  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SFCSR)))
+#define SSI2_STR    (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STR)))
+#define SSI2_SOR    (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SOR)))
+#define SSI2_SACNT  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACNT)))
+#define SSI2_SACADD (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACADD)))
+#define SSI2_SACDAT (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SACDAT)))
+#define SSI2_SATAG  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SATAG)))
+#define SSI2_STMSK  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + STMSK)))
+#define SSI2_SRMSK  (*((volatile u32 *)(SSI2_IO_BASE_ADDR + SRMSK)))
+
+#define SSI_SCR_CLK_IST        (1 << 9)
+#define SSI_SCR_TCH_EN         (1 << 8)
+#define SSI_SCR_SYS_CLK_EN     (1 << 7)
+#define SSI_SCR_I2S_MODE_NORM  (0 << 5)
+#define SSI_SCR_I2S_MODE_MSTR  (1 << 5)
+#define SSI_SCR_I2S_MODE_SLAVE (2 << 5)
+#define SSI_SCR_SYN            (1 << 4)
+#define SSI_SCR_NET            (1 << 3)
+#define SSI_SCR_RE             (1 << 2)
+#define SSI_SCR_TE             (1 << 1)
+#define SSI_SCR_SSIEN          (1 << 0)
+
+#define SSI_SISR_CMDAU         (1 << 18)
+#define SSI_SISR_CMDDU         (1 << 17)
+#define SSI_SISR_RXT           (1 << 16)
+#define SSI_SISR_RDR1          (1 << 15)
+#define SSI_SISR_RDR0          (1 << 14)
+#define SSI_SISR_TDE1          (1 << 13)
+#define SSI_SISR_TDE0          (1 << 12)
+#define SSI_SISR_ROE1          (1 << 11)
+#define SSI_SISR_ROE0          (1 << 10)
+#define SSI_SISR_TUE1          (1 << 9)
+#define SSI_SISR_TUE0          (1 << 8)
+#define SSI_SISR_TFS           (1 << 7)
+#define SSI_SISR_RFS           (1 << 6)
+#define SSI_SISR_TLS           (1 << 5)
+#define SSI_SISR_RLS           (1 << 4)
+#define SSI_SISR_RFF1          (1 << 3)
+#define SSI_SISR_RFF0          (1 << 2)
+#define SSI_SISR_TFE1          (1 << 1)
+#define SSI_SISR_TFE0          (1 << 0)
+
+#define SSI_SIER_RDMAE         (1 << 22)
+#define SSI_SIER_RIE           (1 << 21)
+#define SSI_SIER_TDMAE         (1 << 20)
+#define SSI_SIER_TIE           (1 << 19)
+#define SSI_SIER_CMDAU_EN      (1 << 18)
+#define SSI_SIER_CMDDU_EN      (1 << 17)
+#define SSI_SIER_RXT_EN        (1 << 16)
+#define SSI_SIER_RDR1_EN       (1 << 15)
+#define SSI_SIER_RDR0_EN       (1 << 14)
+#define SSI_SIER_TDE1_EN       (1 << 13)
+#define SSI_SIER_TDE0_EN       (1 << 12)
+#define SSI_SIER_ROE1_EN       (1 << 11)
+#define SSI_SIER_ROE0_EN       (1 << 10)
+#define SSI_SIER_TUE1_EN       (1 << 9)
+#define SSI_SIER_TUE0_EN       (1 << 8)
+#define SSI_SIER_TFS_EN        (1 << 7)
+#define SSI_SIER_RFS_EN        (1 << 6)
+#define SSI_SIER_TLS_EN        (1 << 5)
+#define SSI_SIER_RLS_EN        (1 << 4)
+#define SSI_SIER_RFF1_EN       (1 << 3)
+#define SSI_SIER_RFF0_EN       (1 << 2)
+#define SSI_SIER_TFE1_EN       (1 << 1)
+#define SSI_SIER_TFE0_EN       (1 << 0)
+
+#define SSI_STCR_TXBIT0        (1 << 9)
+#define SSI_STCR_TFEN1         (1 << 8)
+#define SSI_STCR_TFEN0         (1 << 7)
+#define SSI_STCR_TFDIR         (1 << 6)
+#define SSI_STCR_TXDIR         (1 << 5)
+#define SSI_STCR_TSHFD         (1 << 4)
+#define SSI_STCR_TSCKP         (1 << 3)
+#define SSI_STCR_TFSI          (1 << 2)
+#define SSI_STCR_TFSL          (1 << 1)
+#define SSI_STCR_TEFS          (1 << 0)
+
+#define SSI_SRCR_RXBIT0        (1 << 9)
+#define SSI_SRCR_RFEN1         (1 << 8)
+#define SSI_SRCR_RFEN0         (1 << 7)
+#define SSI_SRCR_RFDIR         (1 << 6)
+#define SSI_SRCR_RXDIR         (1 << 5)
+#define SSI_SRCR_RSHFD         (1 << 4)
+#define SSI_SRCR_RSCKP         (1 << 3)
+#define SSI_SRCR_RFSI          (1 << 2)
+#define SSI_SRCR_RFSL          (1 << 1)
+#define SSI_SRCR_REFS          (1 << 0)
+
+#define SSI_STCCR_DIV2         (1 << 18)
+#define SSI_STCCR_PSR          (1 << 15)
+#define SSI_STCCR_WL(x)        ((((x) - 2) >> 1) << 13)
+#define SSI_STCCR_DC(x)        (((x) & 0x1f) << 8)
+#define SSI_STCCR_PM(x)        (((x) & 0xff) << 0)
+#define SSI_STCCR_WL_MASK        (0xf << 13)
+#define SSI_STCCR_DC_MASK        (0x1f << 8)
+#define SSI_STCCR_PM_MASK        (0xff << 0)
+
+#define SSI_SRCCR_DIV2         (1 << 18)
+#define SSI_SRCCR_PSR          (1 << 15)
+#define SSI_SRCCR_WL(x)        ((((x) - 2) >> 1) << 13)
+#define SSI_SRCCR_DC(x)        (((x) & 0x1f) << 8)
+#define SSI_SRCCR_PM(x)        (((x) & 0xff) << 0)
+#define SSI_SRCCR_WL_MASK        (0xf << 13)
+#define SSI_SRCCR_DC_MASK        (0x1f << 8)
+#define SSI_SRCCR_PM_MASK        (0xff << 0)
+
+
+#define SSI_SFCSR_RFCNT1(x)   (((x) & 0xf) << 28)
+#define SSI_SFCSR_TFCNT1(x)   (((x) & 0xf) << 24)
+#define SSI_SFCSR_RFWM1(x)    (((x) & 0xf) << 20)
+#define SSI_SFCSR_TFWM1(x)    (((x) & 0xf) << 16)
+#define SSI_SFCSR_RFCNT0(x)   (((x) & 0xf) << 12)
+#define SSI_SFCSR_TFCNT0(x)   (((x) & 0xf) <<  8)
+#define SSI_SFCSR_RFWM0(x)    (((x) & 0xf) <<  4)
+#define SSI_SFCSR_TFWM0(x)    (((x) & 0xf) <<  0)
+
+#define SSI_STR_TEST          (1 << 15)
+#define SSI_STR_RCK2TCK       (1 << 14)
+#define SSI_STR_RFS2TFS       (1 << 13)
+#define SSI_STR_RXSTATE(x)    (((x) & 0xf) << 8)
+#define SSI_STR_TXD2RXD       (1 <<  7)
+#define SSI_STR_TCK2RCK       (1 <<  6)
+#define SSI_STR_TFS2RFS       (1 <<  5)
+#define SSI_STR_TXSTATE(x)    (((x) & 0xf) << 0)
+
+#define SSI_SOR_CLKOFF        (1 << 6)
+#define SSI_SOR_RX_CLR        (1 << 5)
+#define SSI_SOR_TX_CLR        (1 << 4)
+#define SSI_SOR_INIT          (1 << 3)
+#define SSI_SOR_WAIT(x)       (((x) & 0x3) << 1)
+#define SSI_SOR_SYNRST        (1 << 0)
+
+#define SSI_SACNT_FRDIV(x)    (((x) & 0x3f) << 5)
+#define SSI_SACNT_WR          (x << 4)
+#define SSI_SACNT_RD          (x << 3)
+#define SSI_SACNT_TIF         (x << 2)
+#define SSI_SACNT_FV          (x << 1)
+#define SSI_SACNT_AC97EN      (x << 0)
+
+/* Watermarks for FIFO's */
+#define TXFIFO_WATERMARK				0x4
+#define RXFIFO_WATERMARK				0x4
+
+/* i.MX DAI SSP ID's */
+#define IMX_DAI_SSI0			0 /* SSI1 FIFO 0 */
+#define IMX_DAI_SSI1			1 /* SSI1 FIFO 1 */
+#define IMX_DAI_SSI2			2 /* SSI2 FIFO 0 */
+#define IMX_DAI_SSI3			3 /* SSI2 FIFO 1 */
+
+/* SSI clock sources */
+#define IMX_SSP_SYS_CLK		0
+
+/* SSI audio dividers */
+#define IMX_SSI_TX_DIV_2			0
+#define IMX_SSI_TX_DIV_PSR			1
+#define IMX_SSI_TX_DIV_PM			2
+#define IMX_SSI_RX_DIV_2			3
+#define IMX_SSI_RX_DIV_PSR			4
+#define IMX_SSI_RX_DIV_PM			5
+
+
+/* SSI Div 2 */
+#define IMX_SSI_DIV_2_OFF		(~SSI_STCCR_DIV2)
+#define IMX_SSI_DIV_2_ON		SSI_STCCR_DIV2
+
+extern struct snd_soc_dai imx_ssi_pcm_dai[4];
+extern int get_ssi_clk(int ssi, struct device *dev);
+extern void put_ssi_clk(int ssi);
+#endif