Merge tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging fixes from Greg KH:
 "Here are a number of small staging tree and iio driver fixes.  Nothing
  major, just lots of little things"

* tag 'staging-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (34 commits)
  iio:buffer_cb: Add missing iio_buffer_init()
  iio: Prevent race between IIO chardev opening and IIO device free
  iio: fix: Keep a reference to the IIO device for open file descriptors
  iio: Stop sampling when the device is removed
  iio: Fix crash when scan_bytes is computed with active_scan_mask == NULL
  iio: Fix mcp4725 dev-to-indio_dev conversion in suspend/resume
  iio: Fix bma180 dev-to-indio_dev conversion in suspend/resume
  iio: Fix tmp006 dev-to-indio_dev conversion in suspend/resume
  iio: iio_device_add_event_sysfs() bugfix
  staging: iio: ade7854-spi: Fix return value
  staging:iio:hmc5843: Fix measurement conversion
  iio: isl29018: Fix uninitialized value
  staging:iio:dummy fix kfifo_buf kconfig dependency issue if kfifo modular and buffer enabled for built in dummy driver.
  iio: at91: fix adc_clk overflow
  staging: line6: add bounds check in snd_toneport_source_put()
  Staging: comedi: Fix dependencies for drivers misclassified as PCI
  staging: r8188eu: Adjust RX gain
  staging: r8188eu: Fix smatch warning in core/rtw_ieee80211.
  staging: r8188eu: Fix smatch error in core/rtw_mlme_ext.c
  staging: r8188eu: Fix Smatch off-by-one warning in hal/rtl8188e_hal_init.c
  ...

drivers/iio/accel/bma180.c

@@ -620,7 +620,7 @@ static int bma180_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int bma180_suspend(struct device *dev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct bma180_data *data = iio_priv(indio_dev);
 	int ret;
 
@@ -633,7 +633,7 @@ static int bma180_suspend(struct device *dev)
 
 static int bma180_resume(struct device *dev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct bma180_data *data = iio_priv(indio_dev);
 	int ret;
 

drivers/iio/adc/at91_adc.c

@@ -556,7 +556,7 @@ static const struct iio_info at91_adc_info = {
 
 static int at91_adc_probe(struct platform_device *pdev)
 {
-	unsigned int prsc, mstrclk, ticks, adc_clk, shtim;
+	unsigned int prsc, mstrclk, ticks, adc_clk, adc_clk_khz, shtim;
 	int ret;
 	struct iio_dev *idev;
 	struct at91_adc_state *st;
@@ -649,6 +649,7 @@ static int at91_adc_probe(struct platform_device *pdev)
 	 */
 	mstrclk = clk_get_rate(st->clk);
 	adc_clk = clk_get_rate(st->adc_clk);
+	adc_clk_khz = adc_clk / 1000;
 	prsc = (mstrclk / (2 * adc_clk)) - 1;
 
 	if (!st->startup_time) {
@@ -662,15 +663,15 @@ static int at91_adc_probe(struct platform_device *pdev)
 	 * defined in the electrical characteristics of the board, divided by 8.
 	 * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock
 	 */
-	ticks = round_up((st->startup_time * adc_clk /
-			  1000000) - 1, 8) / 8;
+	ticks = round_up((st->startup_time * adc_clk_khz /
+			  1000) - 1, 8) / 8;
 	/*
 	 * a minimal Sample and Hold Time is necessary for the ADC to guarantee
 	 * the best converted final value between two channels selection
 	 * The formula thus is : Sample and Hold Time = (shtim + 1) / ADCClock
 	 */
-	shtim = round_up((st->sample_hold_time * adc_clk /
-			  1000000) - 1, 1);
+	shtim = round_up((st->sample_hold_time * adc_clk_khz /
+			  1000) - 1, 1);
 
 	reg = AT91_ADC_PRESCAL_(prsc) & st->registers->mr_prescal_mask;
 	reg |= AT91_ADC_STARTUP_(ticks) & st->registers->mr_startup_mask;

drivers/iio/buffer_cb.c

@@ -41,6 +41,8 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 		goto error_ret;
 	}
 
+	iio_buffer_init(&cb_buff->buffer);
+
 	cb_buff->private = private;
 	cb_buff->cb = cb;
 	cb_buff->buffer.access = &iio_cb_access;

drivers/iio/dac/mcp4725.c

@@ -37,21 +37,21 @@ struct mcp4725_data {
 
 static int mcp4725_suspend(struct device *dev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct mcp4725_data *data = iio_priv(indio_dev);
+	struct mcp4725_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
 	u8 outbuf[2];
 
 	outbuf[0] = (data->powerdown_mode + 1) << 4;
 	outbuf[1] = 0;
 	data->powerdown = true;
 
-	return i2c_master_send(to_i2c_client(dev), outbuf, 2);
+	return i2c_master_send(data->client, outbuf, 2);
 }
 
 static int mcp4725_resume(struct device *dev)
 {
-	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-	struct mcp4725_data *data = iio_priv(indio_dev);
+	struct mcp4725_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
 	u8 outbuf[2];
 
 	/* restore previous DAC value */
@@ -59,7 +59,7 @@ static int mcp4725_resume(struct device *dev)
 	outbuf[1] = data->dac_value & 0xff;
 	data->powerdown = false;
 
-	return i2c_master_send(to_i2c_client(dev), outbuf, 2);
+	return i2c_master_send(data->client, outbuf, 2);
 }
 
 #ifdef CONFIG_PM_SLEEP

drivers/iio/iio_core.h

@@ -49,11 +49,15 @@ ssize_t iio_buffer_read_first_n_outer(struct file *filp, char __user *buf,
 #define iio_buffer_poll_addr (&iio_buffer_poll)
 #define iio_buffer_read_first_n_outer_addr (&iio_buffer_read_first_n_outer)
 
+void iio_disable_all_buffers(struct iio_dev *indio_dev);
+
 #else
 
 #define iio_buffer_poll_addr NULL
 #define iio_buffer_read_first_n_outer_addr NULL
 
+static inline void iio_disable_all_buffers(struct iio_dev *indio_dev) {}
+
 #endif
 
 int iio_device_register_eventset(struct iio_dev *indio_dev);

drivers/iio/industrialio-buffer.c

@@ -460,6 +460,25 @@ static int iio_compute_scan_bytes(struct iio_dev *indio_dev, const long *mask,
 	return bytes;
 }
 
+void iio_disable_all_buffers(struct iio_dev *indio_dev)
+{
+	struct iio_buffer *buffer, *_buffer;
+
+	if (list_empty(&indio_dev->buffer_list))
+		return;
+
+	if (indio_dev->setup_ops->predisable)
+		indio_dev->setup_ops->predisable(indio_dev);
+
+	list_for_each_entry_safe(buffer, _buffer,
+			&indio_dev->buffer_list, buffer_list)
+		list_del_init(&buffer->buffer_list);
+
+	indio_dev->currentmode = INDIO_DIRECT_MODE;
+	if (indio_dev->setup_ops->postdisable)
+		indio_dev->setup_ops->postdisable(indio_dev);
+}
+
 int iio_update_buffers(struct iio_dev *indio_dev,
 		       struct iio_buffer *insert_buffer,
 		       struct iio_buffer *remove_buffer)
@@ -528,8 +547,15 @@ int iio_update_buffers(struct iio_dev *indio_dev,
 			 * Note can only occur when adding a buffer.
 			 */
 			list_del(&insert_buffer->buffer_list);
-			indio_dev->active_scan_mask = old_mask;
-			success = -EINVAL;
+			if (old_mask) {
+				indio_dev->active_scan_mask = old_mask;
+				success = -EINVAL;
+			}
+			else {
+				kfree(compound_mask);
+				ret = -EINVAL;
+				goto error_ret;
+			}
 		}
 	} else {
 		indio_dev->active_scan_mask = compound_mask;

drivers/iio/industrialio-core.c

@@ -848,8 +848,6 @@ static void iio_device_unregister_sysfs(struct iio_dev *indio_dev)
 static void iio_dev_release(struct device *device)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(device);
-	if (indio_dev->chrdev.dev)
-		cdev_del(&indio_dev->chrdev);
 	if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
 		iio_device_unregister_trigger_consumer(indio_dev);
 	iio_device_unregister_eventset(indio_dev);
@@ -970,6 +968,8 @@ static int iio_chrdev_open(struct inode *inode, struct file *filp)
 	if (test_and_set_bit(IIO_BUSY_BIT_POS, &indio_dev->flags))
 		return -EBUSY;
 
+	iio_device_get(indio_dev);
+
 	filp->private_data = indio_dev;
 
 	return 0;
@@ -983,6 +983,8 @@ static int iio_chrdev_release(struct inode *inode, struct file *filp)
 	struct iio_dev *indio_dev = container_of(inode->i_cdev,
 						struct iio_dev, chrdev);
 	clear_bit(IIO_BUSY_BIT_POS, &indio_dev->flags);
+	iio_device_put(indio_dev);
+
 	return 0;
 }
 
@@ -1052,18 +1054,20 @@ int iio_device_register(struct iio_dev *indio_dev)
 		indio_dev->setup_ops == NULL)
 		indio_dev->setup_ops = &noop_ring_setup_ops;
 
-	ret = device_add(&indio_dev->dev);
-	if (ret < 0)
-		goto error_unreg_eventset;
 	cdev_init(&indio_dev->chrdev, &iio_buffer_fileops);
 	indio_dev->chrdev.owner = indio_dev->info->driver_module;
+	indio_dev->chrdev.kobj.parent = &indio_dev->dev.kobj;
 	ret = cdev_add(&indio_dev->chrdev, indio_dev->dev.devt, 1);
 	if (ret < 0)
-		goto error_del_device;
-	return 0;
+		goto error_unreg_eventset;
 
-error_del_device:
-	device_del(&indio_dev->dev);
+	ret = device_add(&indio_dev->dev);
+	if (ret < 0)
+		goto error_cdev_del;
+
+	return 0;
+error_cdev_del:
+	cdev_del(&indio_dev->chrdev);
 error_unreg_eventset:
 	iio_device_unregister_eventset(indio_dev);
 error_free_sysfs:
@@ -1078,9 +1082,16 @@ EXPORT_SYMBOL(iio_device_register);
 void iio_device_unregister(struct iio_dev *indio_dev)
 {
 	mutex_lock(&indio_dev->info_exist_lock);
+
+	device_del(&indio_dev->dev);
+
+	if (indio_dev->chrdev.dev)
+		cdev_del(&indio_dev->chrdev);
+
+	iio_disable_all_buffers(indio_dev);
+
 	indio_dev->info = NULL;
 	mutex_unlock(&indio_dev->info_exist_lock);
-	device_del(&indio_dev->dev);
 }
 EXPORT_SYMBOL(iio_device_unregister);
 subsys_initcall(iio_init);

drivers/iio/industrialio-event.c

@@ -72,7 +72,8 @@ EXPORT_SYMBOL(iio_push_event);
 static unsigned int iio_event_poll(struct file *filep,
 			     struct poll_table_struct *wait)
 {
-	struct iio_event_interface *ev_int = filep->private_data;
+	struct iio_dev *indio_dev = filep->private_data;
+	struct iio_event_interface *ev_int = indio_dev->event_interface;
 	unsigned int events = 0;
 
 	poll_wait(filep, &ev_int->wait, wait);
@@ -90,7 +91,8 @@ static ssize_t iio_event_chrdev_read(struct file *filep,
 				     size_t count,
 				     loff_t *f_ps)
 {
-	struct iio_event_interface *ev_int = filep->private_data;
+	struct iio_dev *indio_dev = filep->private_data;
+	struct iio_event_interface *ev_int = indio_dev->event_interface;
 	unsigned int copied;
 	int ret;
 
@@ -121,7 +123,8 @@ error_unlock:
 
 static int iio_event_chrdev_release(struct inode *inode, struct file *filep)
 {
-	struct iio_event_interface *ev_int = filep->private_data;
+	struct iio_dev *indio_dev = filep->private_data;
+	struct iio_event_interface *ev_int = indio_dev->event_interface;
 
 	spin_lock_irq(&ev_int->wait.lock);
 	__clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags);
@@ -133,6 +136,8 @@ static int iio_event_chrdev_release(struct inode *inode, struct file *filep)
 	kfifo_reset_out(&ev_int->det_events);
 	spin_unlock_irq(&ev_int->wait.lock);
 
+	iio_device_put(indio_dev);
+
 	return 0;
 }
 
@@ -158,12 +163,15 @@ int iio_event_getfd(struct iio_dev *indio_dev)
 		return -EBUSY;
 	}
 	spin_unlock_irq(&ev_int->wait.lock);
-	fd = anon_inode_getfd("iio:event",
-				&iio_event_chrdev_fileops, ev_int, O_RDONLY);
+	iio_device_get(indio_dev);
+
+	fd = anon_inode_getfd("iio:event", &iio_event_chrdev_fileops,
+				indio_dev, O_RDONLY);
 	if (fd < 0) {
 		spin_lock_irq(&ev_int->wait.lock);
 		__clear_bit(IIO_BUSY_BIT_POS, &ev_int->flags);
 		spin_unlock_irq(&ev_int->wait.lock);
+		iio_device_put(indio_dev);
 	}
 	return fd;
 }
@@ -276,7 +284,7 @@ static int iio_device_add_event_sysfs(struct iio_dev *indio_dev,
 			goto error_ret;
 		}
 		if (chan->modified)
-			mask = IIO_MOD_EVENT_CODE(chan->type, 0, chan->channel,
+			mask = IIO_MOD_EVENT_CODE(chan->type, 0, chan->channel2,
 						  i/IIO_EV_DIR_MAX,
 						  i%IIO_EV_DIR_MAX);
 		else if (chan->differential)

drivers/iio/temperature/tmp006.c

@@ -255,12 +255,14 @@ static int tmp006_remove(struct i2c_client *client)
 #ifdef CONFIG_PM_SLEEP
 static int tmp006_suspend(struct device *dev)
 {
-	return tmp006_powerdown(iio_priv(dev_to_iio_dev(dev)));
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	return tmp006_powerdown(iio_priv(indio_dev));
 }
 
 static int tmp006_resume(struct device *dev)
 {
-	struct tmp006_data *data = iio_priv(dev_to_iio_dev(dev));
+	struct tmp006_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
 	return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
 		data->config | TMP006_CONFIG_MOD_MASK);
 }

drivers/staging/comedi/Kconfig

@@ -96,6 +96,15 @@ config COMEDI_SKEL
 	  To compile this driver as a module, choose M here: the module will be
 	  called skel.
 
+config COMEDI_SSV_DNP
+	tristate "SSV Embedded Systems DIL/Net-PC support"
+	depends on X86_32 || COMPILE_TEST
+	---help---
+	  Enable support for SSV Embedded Systems DIL/Net-PC
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called ssv_dnp.
+
 endif # COMEDI_MISC_DRIVERS
 
 menuconfig COMEDI_ISA_DRIVERS
@@ -386,6 +395,14 @@ config COMEDI_DMM32AT
 	  To compile this driver as a module, choose M here: the module will be
 	  called dmm32at.
 
+config COMEDI_UNIOXX5
+	tristate "Fastwel UNIOxx-5 analog and digital io board support"
+	---help---
+	  Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called unioxx5.
+
 config COMEDI_FL512
 	tristate "FL512 ISA card support"
 	---help---
@@ -855,14 +872,6 @@ config COMEDI_DYNA_PCI10XX
 	  To compile this driver as a module, choose M here: the module will be
 	  called dyna_pci10xx.
 
-config COMEDI_UNIOXX5
-	tristate "Fastwel UNIOxx-5 analog and digital io board support"
-	---help---
-	  Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called unioxx5.
-
 config COMEDI_GSC_HPDI
 	tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
 	select COMEDI_FC
@@ -1085,14 +1094,6 @@ config COMEDI_S626
 	  To compile this driver as a module, choose M here: the module will be
 	  called s626.
 
-config COMEDI_SSV_DNP
-	tristate "SSV Embedded Systems DIL/Net-PC support"
-	---help---
-	  Enable support for SSV Embedded Systems DIL/Net-PC
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called ssv_dnp.
-
 config COMEDI_MITE
 	depends on HAS_DMA
 	tristate

drivers/staging/dgap/dgap_driver.c

@@ -474,7 +474,7 @@ static void dgap_cleanup_board(struct board_t *brd)
 
                 DGAP_LOCK(dgap_global_lock, flags);
                 brd->msgbuf = NULL;
-                printk(brd->msgbuf_head);
+                printk("%s", brd->msgbuf_head);
                 kfree(brd->msgbuf_head);
                 brd->msgbuf_head = NULL;
                 DGAP_UNLOCK(dgap_global_lock, flags);
@@ -628,7 +628,7 @@ static int dgap_found_board(struct pci_dev *pdev, int id)
 	DPR_INIT(("dgap_scan(%d) - printing out the msgbuf\n", i));
 	DGAP_LOCK(dgap_global_lock, flags);
 	brd->msgbuf = NULL;
-	printk(brd->msgbuf_head);
+	printk("%s", brd->msgbuf_head);
 	kfree(brd->msgbuf_head);
 	brd->msgbuf_head = NULL;
 	DGAP_UNLOCK(dgap_global_lock, flags);
@@ -955,25 +955,28 @@ static void dgap_mbuf(struct board_t *brd, const char *fmt, ...) {
 	char		buf[1024];
 	int		i;
 	unsigned long	flags;
+	size_t		length;
 
 	DGAP_LOCK(dgap_global_lock, flags);
 
 	/* Format buf using fmt and arguments contained in ap. */
 	va_start(ap, fmt);
-	i = vsprintf(buf, fmt,  ap);
+	i = vsnprintf(buf, sizeof(buf), fmt,  ap);
 	va_end(ap);
 
 	DPR((buf));
 
 	if (!brd || !brd->msgbuf) {
-		printk(buf);
+		printk("%s", buf);
 		DGAP_UNLOCK(dgap_global_lock, flags);
 		return;
 	}
 
-	memcpy(brd->msgbuf, buf, strlen(buf));
-	brd->msgbuf += strlen(buf);
-	*brd->msgbuf = 0;
+	length = strlen(buf) + 1;
+	if (brd->msgbuf - brd->msgbuf_head < length)
+		length = brd->msgbuf - brd->msgbuf_head;
+	memcpy(brd->msgbuf, buf, length);
+	brd->msgbuf += length;
 
 	DGAP_UNLOCK(dgap_global_lock, flags);
 }

drivers/staging/dgnc/dgnc_driver.c

@@ -454,7 +454,7 @@ static void dgnc_cleanup_board(struct board_t *brd)
 
 		DGNC_LOCK(dgnc_global_lock, flags);
 		brd->msgbuf = NULL;
-		printk(brd->msgbuf_head);
+		printk("%s", brd->msgbuf_head);
 		kfree(brd->msgbuf_head);
 		brd->msgbuf_head = NULL;
 		DGNC_UNLOCK(dgnc_global_lock, flags);
@@ -710,7 +710,7 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 	DPR_INIT(("dgnc_scan(%d) - printing out the msgbuf\n", i));
 	DGNC_LOCK(dgnc_global_lock, flags);
 	brd->msgbuf = NULL;
-	printk(brd->msgbuf_head);
+	printk("%s", brd->msgbuf_head);
 	kfree(brd->msgbuf_head);
 	brd->msgbuf_head = NULL;
 	DGNC_UNLOCK(dgnc_global_lock, flags);

drivers/staging/iio/Kconfig

@@ -37,7 +37,7 @@ config IIO_SIMPLE_DUMMY_EVENTS
 
 config IIO_SIMPLE_DUMMY_BUFFER
        boolean "Buffered capture support"
-       depends on IIO_KFIFO_BUF
+       select IIO_KFIFO_BUF
        help
          Add buffered data capture to the simple dummy driver.
 

drivers/staging/iio/light/isl29018.c

@@ -563,6 +563,7 @@ static int isl29018_probe(struct i2c_client *client,
 	mutex_init(&chip->lock);
 
 	chip->lux_scale = 1;
+	chip->lux_uscale = 0;
 	chip->range = 1000;
 	chip->adc_bit = 16;
 	chip->suspended = false;

drivers/staging/iio/magnetometer/hmc5843.c

@@ -229,7 +229,7 @@ static int hmc5843_read_measurement(struct iio_dev *indio_dev,
 	if (result < 0)
 		return -EINVAL;
 
-	*val = result;
+	*val = sign_extend32(result, 15);
 	return IIO_VAL_INT;
 }
 

drivers/staging/iio/meter/ade7854-spi.c

@@ -299,7 +299,7 @@ static int ade7854_spi_probe(struct spi_device *spi)
 	if (ret)
 		iio_device_free(indio_dev);
 
-	return 0;
+	return ret;
 }
 
 static int ade7854_spi_remove(struct spi_device *spi)

drivers/staging/line6/toneport.c

@@ -244,13 +244,17 @@ static int snd_toneport_source_put(struct snd_kcontrol *kcontrol,
 	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
 	struct usb_line6_toneport *toneport =
 	    (struct usb_line6_toneport *)line6pcm->line6;
+	unsigned int source;
 
-	if (ucontrol->value.enumerated.item[0] == toneport->source)
+	source = ucontrol->value.enumerated.item[0];
+	if (source >= ARRAY_SIZE(toneport_source_info))
+		return -EINVAL;
+	if (source == toneport->source)
 		return 0;
 
-	toneport->source = ucontrol->value.enumerated.item[0];
+	toneport->source = source;
 	toneport_send_cmd(toneport->line6.usbdev,
-			  toneport_source_info[toneport->source].code, 0x0000);
+			  toneport_source_info[source].code, 0x0000);
 	return 1;
 }
 

drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c

@@ -1802,7 +1802,7 @@ kiblnd_recv (lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg, int delayed,
 int
 kiblnd_thread_start(int (*fn)(void *arg), void *arg, char *name)
 {
-	struct task_struct *task = kthread_run(fn, arg, name);
+	struct task_struct *task = kthread_run(fn, arg, "%s", name);
 
 	if (IS_ERR(task))
 		return PTR_ERR(task);

drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c

@@ -1005,7 +1005,7 @@ ksocknal_send(lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg)
 int
 ksocknal_thread_start(int (*fn)(void *arg), void *arg, char *name)
 {
-	struct task_struct *task = kthread_run(fn, arg, name);
+	struct task_struct *task = kthread_run(fn, arg, "%s", name);
 
 	if (IS_ERR(task))
 		return PTR_ERR(task);

drivers/staging/lustre/lustre/Kconfig

@@ -1,6 +1,6 @@
 config LUSTRE_FS
 	tristate "Lustre file system client support"
-	depends on INET && m
+	depends on INET && m && !MIPS && !XTENSA && !SUPERH
 	select LNET
 	select CRYPTO
 	select CRYPTO_CRC32
@@ -52,7 +52,7 @@ config LUSTRE_DEBUG_EXPENSIVE_CHECK
 config LUSTRE_TRANSLATE_ERRNOS
 	bool
 	depends on LUSTRE_FS && !X86
-	default true
+	default y
 
 config LUSTRE_LLITE_LLOOP
 	bool "Lustre virtual block device"

drivers/staging/lustre/lustre/ldlm/ldlm_lockd.c

@@ -800,9 +800,9 @@ static int ldlm_bl_thread_start(struct ldlm_bl_pool *blp)
 
 	init_completion(&bltd.bltd_comp);
 	bltd.bltd_num = atomic_read(&blp->blp_num_threads);
-	snprintf(bltd.bltd_name, sizeof(bltd.bltd_name) - 1,
+	snprintf(bltd.bltd_name, sizeof(bltd.bltd_name),
 		"ldlm_bl_%02d", bltd.bltd_num);
-	task = kthread_run(ldlm_bl_thread_main, &bltd, bltd.bltd_name);
+	task = kthread_run(ldlm_bl_thread_main, &bltd, "%s", bltd.bltd_name);
 	if (IS_ERR(task)) {
 		CERROR("cannot start LDLM thread ldlm_bl_%02d: rc %ld\n",
 		       atomic_read(&blp->blp_num_threads), PTR_ERR(task));

drivers/staging/lustre/lustre/libcfs/workitem.c

@@ -397,7 +397,7 @@ cfs_wi_sched_create(char *name, struct cfs_cpt_table *cptab,
 				 sched->ws_name, sched->ws_nthreads);
 		}
 
-		task = kthread_run(cfs_wi_scheduler, sched, name);
+		task = kthread_run(cfs_wi_scheduler, sched, "%s", name);
 		if (!IS_ERR(task)) {
 			nthrs--;
 			continue;

drivers/staging/lustre/lustre/ptlrpc/pinger.c

@@ -383,8 +383,8 @@ int ptlrpc_start_pinger(void)
 
 	/* CLONE_VM and CLONE_FILES just avoid a needless copy, because we
 	 * just drop the VM and FILES in cfs_daemonize_ctxt() right away. */
-	rc = PTR_ERR(kthread_run(ptlrpc_pinger_main,
-				 &pinger_thread, pinger_thread.t_name));
+	rc = PTR_ERR(kthread_run(ptlrpc_pinger_main, &pinger_thread,
+				 "%s", pinger_thread.t_name));
 	if (IS_ERR_VALUE(rc)) {
 		CERROR("cannot start thread: %d\n", rc);
 		return rc;

drivers/staging/lustre/lustre/ptlrpc/ptlrpcd.c

@@ -615,7 +615,7 @@ int ptlrpcd_start(int index, int max, const char *name, struct ptlrpcd_ctl *pc)
 	init_completion(&pc->pc_starting);
 	init_completion(&pc->pc_finishing);
 	spin_lock_init(&pc->pc_lock);
-	strncpy(pc->pc_name, name, sizeof(pc->pc_name) - 1);
+	strlcpy(pc->pc_name, name, sizeof(pc->pc_name));
 	pc->pc_set = ptlrpc_prep_set();
 	if (pc->pc_set == NULL)
 		GOTO(out, rc = -ENOMEM);
@@ -638,7 +638,7 @@ int ptlrpcd_start(int index, int max, const char *name, struct ptlrpcd_ctl *pc)
 				GOTO(out, rc);
 		}
 
-		task = kthread_run(ptlrpcd, pc, pc->pc_name);
+		task = kthread_run(ptlrpcd, pc, "%s", pc->pc_name);
 		if (IS_ERR(task))
 			GOTO(out, rc = PTR_ERR(task));
 
@@ -745,7 +745,7 @@ static int ptlrpcd_init(void)
 	if (ptlrpcds == NULL)
 		GOTO(out, rc = -ENOMEM);
 
-	snprintf(name, 15, "ptlrpcd_rcv");
+	snprintf(name, sizeof(name), "ptlrpcd_rcv");
 	set_bit(LIOD_RECOVERY, &ptlrpcds->pd_thread_rcv.pc_flags);
 	rc = ptlrpcd_start(-1, nthreads, name, &ptlrpcds->pd_thread_rcv);
 	if (rc < 0)
@@ -764,7 +764,7 @@ static int ptlrpcd_init(void)
 	 *      unnecessary dependency. But how to distribute async RPCs load
 	 *      among all the ptlrpc daemons becomes another trouble. */
 	for (i = 0; i < nthreads; i++) {
-		snprintf(name, 15, "ptlrpcd_%d", i);
+		snprintf(name, sizeof(name), "ptlrpcd_%d", i);
 		rc = ptlrpcd_start(i, nthreads, name, &ptlrpcds->pd_threads[i]);
 		if (rc < 0)
 			GOTO(out, rc);

drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c

@@ -59,8 +59,8 @@
  ****************************************/
 
 
-#define PTRS_PER_PAGE   (PAGE_CACHE_SIZE / sizeof(void *))
-#define PAGES_PER_POOL  (PTRS_PER_PAGE)
+#define POINTERS_PER_PAGE	(PAGE_CACHE_SIZE / sizeof(void *))
+#define PAGES_PER_POOL		(POINTERS_PER_PAGE)
 
 #define IDLE_IDX_MAX	    (100)
 #define IDLE_IDX_WEIGHT	 (3)

drivers/staging/lustre/lustre/ptlrpc/service.c

@@ -2718,15 +2718,15 @@ int ptlrpc_start_thread(struct ptlrpc_service_part *svcpt, int wait)
 	spin_unlock(&svcpt->scp_lock);
 
 	if (svcpt->scp_cpt >= 0) {
-		snprintf(thread->t_name, PTLRPC_THR_NAME_LEN, "%s%02d_%03d",
+		snprintf(thread->t_name, sizeof(thread->t_name), "%s%02d_%03d",
 			 svc->srv_thread_name, svcpt->scp_cpt, thread->t_id);
 	} else {
-		snprintf(thread->t_name, PTLRPC_THR_NAME_LEN, "%s_%04d",
+		snprintf(thread->t_name, sizeof(thread->t_name), "%s_%04d",
 			 svc->srv_thread_name, thread->t_id);
 	}
 
 	CDEBUG(D_RPCTRACE, "starting thread '%s'\n", thread->t_name);
-	rc = PTR_ERR(kthread_run(ptlrpc_main, thread, thread->t_name));
+	rc = PTR_ERR(kthread_run(ptlrpc_main, thread, "%s", thread->t_name));
 	if (IS_ERR_VALUE(rc)) {
 		CERROR("cannot start thread '%s': rc %d\n",
 		       thread->t_name, rc);

drivers/staging/rtl8188eu/core/rtw_ieee80211.c

@@ -157,8 +157,8 @@ _func_enter_;
 
 	*frlen = *frlen + (len + 2);
 
-	return pbuf + len + 2;
 _func_exit_;
+	return pbuf + len + 2;
 }
 
 inline u8 *rtw_set_ie_ch_switch (u8 *buf, u32 *buf_len, u8 ch_switch_mode,

drivers/staging/rtl8188eu/core/rtw_mlme_ext.c

@@ -1827,13 +1827,13 @@ unsigned int OnAction_back(struct adapter *padapter, union recv_frame *precv_fra
 
 #ifdef CONFIG_88EU_P2P
 
-static int get_reg_classes_full_count(struct p2p_channels channel_list)
+static int get_reg_classes_full_count(struct p2p_channels *channel_list)
 {
 	int cnt = 0;
 	int i;
 
-	for (i = 0; i < channel_list.reg_classes; i++) {
-		cnt += channel_list.reg_class[i].channels;
+	for (i = 0; i < channel_list->reg_classes; i++) {
+		cnt += channel_list->reg_class[i].channels;
 	}
 
 	return cnt;
@@ -2065,7 +2065,7 @@ void issue_p2p_GO_request(struct adapter *padapter, u8 *raddr)
 	/*  + number of channels in all classes */
 	len_channellist_attr = 3
 	   + (1 + 1) * (u16)(pmlmeext->channel_list.reg_classes)
-	   + get_reg_classes_full_count(pmlmeext->channel_list);
+	   + get_reg_classes_full_count(&pmlmeext->channel_list);
 
 	*(__le16 *)(p2pie + p2pielen) = cpu_to_le16(len_channellist_attr);
 	p2pielen += 2;
@@ -2437,7 +2437,7 @@ static void issue_p2p_GO_response(struct adapter *padapter, u8 *raddr, u8 *frame
 	/*  + number of channels in all classes */
 	len_channellist_attr = 3
 	   + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes
-	   + get_reg_classes_full_count(pmlmeext->channel_list);
+	   + get_reg_classes_full_count(&pmlmeext->channel_list);
 
 	*(__le16 *)(p2pie + p2pielen) = cpu_to_le16(len_channellist_attr);
 
@@ -2859,7 +2859,7 @@ void issue_p2p_invitation_request(struct adapter *padapter, u8 *raddr)
 	/*  + number of channels in all classes */
 	len_channellist_attr = 3
 	   + (1 + 1) * (u16)pmlmeext->channel_list.reg_classes
-	   + get_reg_classes_full_count(pmlmeext->channel_list);
+	   + get_reg_classes_full_count(&pmlmeext->channel_list);
 
 	*(__le16 *)(p2pie + p2pielen) = cpu_to_le16(len_channellist_attr);
 
@@ -3120,7 +3120,7 @@ void issue_p2p_invitation_response(struct adapter *padapter, u8 *raddr, u8 dialo
 		/*  + number of channels in all classes */
 		len_channellist_attr = 3
 			+ (1 + 1) * (u16)pmlmeext->channel_list.reg_classes
-			+ get_reg_classes_full_count(pmlmeext->channel_list);
+			+ get_reg_classes_full_count(&pmlmeext->channel_list);
 
 		*(__le16 *)(p2pie + p2pielen) = cpu_to_le16(len_channellist_attr);
 		p2pielen += 2;

drivers/staging/rtl8188eu/core/rtw_wlan_util.c

@@ -631,7 +631,7 @@ void WMMOnAssocRsp(struct adapter *padapter)
 	inx[0] = 0; inx[1] = 1; inx[2] = 2; inx[3] = 3;
 
 	if (pregpriv->wifi_spec == 1) {
-		u32	j, tmp, change_inx;
+		u32	j, tmp, change_inx = false;
 
 		/* entry indx: 0->vo, 1->vi, 2->be, 3->bk. */
 		for (i = 0; i < 4; i++) {

drivers/staging/rtl8188eu/include/odm.h

@@ -1010,7 +1010,7 @@ enum dm_dig_op {
 #define		DM_false_ALARM_THRESH_LOW	400
 #define		DM_false_ALARM_THRESH_HIGH	1000
 
-#define		DM_DIG_MAX_NIC			0x3e
+#define		DM_DIG_MAX_NIC			0x4e
 #define		DM_DIG_MIN_NIC			0x1e /* 0x22/0x1c */
 
 #define		DM_DIG_MAX_AP			0x32

drivers/staging/rtl8188eu/include/rtl8188e_hal.h

@@ -188,7 +188,7 @@ enum ChannelPlan {
 
 struct txpowerinfo24g {
 	u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
-	u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G-1];
+	u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
 	/* If only one tx, only BW20 and OFDM are used. */
 	s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT];
 	s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT];

drivers/staging/rtl8188eu/include/rtw_mlme_ext.h

@@ -870,6 +870,7 @@ static struct fwevent wlanevents[] = {
 	{0, NULL},
 	{0, NULL},
 	{0, &rtw_cpwm_event_callback},
+	{0, NULL},
 };
 
 #endif/* _RTL_MLME_EXT_C_ */

drivers/staging/vt6656/card.c

@@ -172,8 +172,8 @@ static u16 swGetOFDMControlRate(struct vnt_private *pDevice, u16 wRateIdx)
 	if (!CARDbIsOFDMinBasicRate(pDevice)) {
 		DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO
 			"swGetOFDMControlRate:(NO OFDM) %d\n", wRateIdx);
-	if (wRateIdx > RATE_24M)
-		wRateIdx = RATE_24M;
+		if (wRateIdx > RATE_24M)
+			wRateIdx = RATE_24M;
 		return wRateIdx;
 	}
 

drivers/staging/xillybus/xillybus_core.c

@@ -2054,7 +2054,7 @@ static int xillybus_init_chrdev(struct xilly_endpoint *endpoint,
 				       NULL,
 				       MKDEV(major, i),
 				       NULL,
-				       devname);
+				       "%s", devname);
 
 		if (IS_ERR(device)) {
 			pr_warn("xillybus: Failed to create %s "

drivers/staging/zram/zram_drv.c

@@ -981,4 +981,3 @@ MODULE_PARM_DESC(num_devices, "Number of zram devices");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Nitin Gupta <ngupta@vflare.org>");
 MODULE_DESCRIPTION("Compressed RAM Block Device");
-MODULE_ALIAS("devname:zram");