Merge branch 'tegra/dt' into next/dt

* tegra/dt:
  arm/tegra: Seaboard: Add GPIO key device tree nodes
  arm/dt: Add ADT7461 to Seaboard
  arm/dt: tegra: Use new compatible value for DVC I2C controller
  arm/tegra: initial device tree for tegra30
  arm/tegra: convert tegra20 to GIC devicetree binding
  arm/dt: tegra: Fix SDHCI nodes to match board files
  arm/dt: tegra: Fix serial nodes to match board files
  arm/dt: tegra: Fix I2C nodes to match board files
  arm/dt: tegra: Remove /chosen node
  arm/dt: tegra: Remove /memreserve/ from device-tree files
  arm/tegra: board-dt: Enable audio-related clocks
  arm/tegra: board-dt: Fix AUXDATA typo
  arm/dt: tegra: add dts file for paz00
  arm/tegra: Add device-tree support for TrimSlice board
  arm/dt: tegra: Clean up I2S and DAS nodes
  USB: ehci-tegra: add probing through device tree
  arm/dt: add basic usb nodes to tegra device trees
  arm/tegra: fix variable formatting in makefile

Conflicts:
	arch/arm/mach-tegra/Makefile

Documentation/devicetree/bindings/arm/tegra.txt

@@ -0,0 +1,14 @@
+NVIDIA Tegra device tree bindings
+-------------------------------------------
+
+Boards with the tegra20 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "nvidia,tegra20";
+
+Boards with the tegra30 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "nvidia,tegra30";

Documentation/devicetree/bindings/usb/tegra-usb.txt

@@ -0,0 +1,13 @@
+Tegra SOC USB controllers
+
+The device node for a USB controller that is part of a Tegra
+SOC is as described in the document "Open Firmware Recommended
+Practice : Universal Serial Bus" with the following modifications
+and additions :
+
+Required properties :
+ - compatible : Should be "nvidia,tegra20-ehci" for USB controllers
+   used in host mode.
+ - phy_type : Should be one of "ulpi" or "utmi".
+ - nvidia,vbus-gpio : If present, specifies a gpio that needs to be
+   activated for the bus to be powered.

arch/arm/boot/dts/tegra-harmony.dts

@@ -1,16 +1,11 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra2 Harmony evaluation board";
 	compatible = "nvidia,harmony", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait";
-	};
-
 	memory@0 {
 		reg = < 0x00000000 0x40000000 >;
 	};
@@ -52,16 +47,40 @@
 		ext-mic-en-gpios = <&gpio 185 0>;
 	};
 
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
 	sdhci@c8000200 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
 		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
 	sdhci@c8000600 {
 		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
 		wp-gpios = <&gpio 59 0>; /* gpio PH3 */

arch/arm/boot/dts/tegra-paz00.dts

@@ -0,0 +1,77 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Toshiba AC100 / Dynabook AZ";
+	compatible = "compal,paz00", "nvidia,tegra20";
+
+	memory@0 {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		status = "disable";
+	};
+
+	nvec@7000c500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,nvec";
+		reg = <0x7000C500 0x100>;
+		interrupts = <0 92 0x04>;
+		clock-frequency = <80000>;
+		request-gpios = <&gpio 170 0>;
+		slave-addr = <138>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+	};
+
+	serial@70006000 {
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
+	serial@70006300 {
+		clock-frequency = <216000000>;
+	};
+
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
+		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		support-8bit;
+	};
+};

arch/arm/boot/dts/tegra-seaboard.dts

@@ -1,25 +1,65 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Seaboard";
 	compatible = "nvidia,seaboard", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
-	};
-
 	memory {
 		device_type = "memory";
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+
+		adt7461@4c {
+			compatible = "adt7461";
+			reg = <0x4c>;
+		};
+	};
+
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
@@ -29,4 +69,28 @@
 	sdhci@c8000600 {
 		support-8bit;
 	};
+
+	usb@c5000000 {
+		nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpio 170 1>; /* gpio PV2, active low */
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+
+		lid {
+			label = "Lid";
+			gpios = <&gpio 23 0>; /* gpio PC7 */
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
 };

arch/arm/boot/dts/tegra-trimslice.dts

@@ -0,0 +1,65 @@
+/dts-v1/;
+
+/include/ "tegra20.dtsi"
+
+/ {
+	model = "Compulab TrimSlice board";
+	compatible = "compulab,trimslice", "nvidia,tegra20";
+
+	memory@0 {
+		reg = < 0x00000000 0x40000000 >;
+	};
+
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "disable";
+	};
+
+	serial@70006000 {
+		clock-frequency = < 216000000 >;
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
+	serial@70006300 {
+		status = "disable";
+	};
+
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
+	sdhci@c8000400 {
+		status = "disable";
+	};
+
+	sdhci@c8000600 {
+		cd-gpios = <&gpio 121 0>;
+		wp-gpios = <&gpio 122 0>;
+	};
+};

arch/arm/boot/dts/tegra-ventana.dts

@@ -1,24 +1,59 @@
 /dts-v1/;
 
-/memreserve/ 0x1c000000 0x04000000;
 /include/ "tegra20.dtsi"
 
 / {
 	model = "NVIDIA Tegra2 Ventana evaluation board";
 	compatible = "nvidia,ventana", "nvidia,tegra20";
 
-	chosen {
-		bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/ram rdinit=/sbin/init";
-	};
-
 	memory {
 		reg = < 0x00000000 0x40000000 >;
 	};
 
+	i2c@7000c000 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c400 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000c500 {
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		clock-frequency = <400000>;
+	};
+
+	serial@70006000 {
+		status = "disable";
+	};
+
+	serial@70006040 {
+		status = "disable";
+	};
+
+	serial@70006200 {
+		status = "disable";
+	};
+
 	serial@70006300 {
 		clock-frequency = < 216000000 >;
 	};
 
+	serial@70006400 {
+		status = "disable";
+	};
+
+	sdhci@c8000000 {
+		status = "disable";
+	};
+
+	sdhci@c8000200 {
+		status = "disable";
+	};
+
 	sdhci@c8000400 {
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
 		wp-gpios = <&gpio 57 0>; /* gpio PH1 */

arch/arm/boot/dts/tegra20.dtsi

@@ -5,9 +5,9 @@
 	interrupt-parent = <&intc>;
 
 	intc: interrupt-controller@50041000 {
-		compatible = "nvidia,tegra20-gic";
+		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x50041000 0x1000 >,
 		      < 0x50040100 0x0100 >;
 	};
@@ -17,7 +17,7 @@
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000C000 0x100>;
-		interrupts = < 70 >;
+		interrupts = < 0 38 0x04 >;
 	};
 
 	i2c@7000c400 {
@@ -25,7 +25,7 @@
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000C400 0x100>;
-		interrupts = < 116 >;
+		interrupts = < 0 84 0x04 >;
 	};
 
 	i2c@7000c500 {
@@ -33,38 +33,32 @@
 		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000C500 0x100>;
-		interrupts = < 124 >;
+		interrupts = < 0 92 0x04 >;
 	};
 
 	i2c@7000d000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		compatible = "nvidia,tegra20-i2c";
+		compatible = "nvidia,tegra20-i2c-dvc";
 		reg = <0x7000D000 0x200>;
-		interrupts = < 85 >;
+		interrupts = < 0 53 0x04 >;
 	};
 
 	i2s@70002800 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002800 0x200>;
-		interrupts = < 45 >;
+		interrupts = < 0 13 0x04 >;
 		dma-channel = < 2 >;
 	};
 
 	i2s@70002a00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nvidia,tegra20-i2s";
 		reg = <0x70002a00 0x200>;
-		interrupts = < 35 >;
+		interrupts = < 0 3 0x04 >;
 		dma-channel = < 1 >;
 	};
 
 	das@70000c00 {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
 	};
@@ -72,7 +66,13 @@
 	gpio: gpio@6000d000 {
 		compatible = "nvidia,tegra20-gpio";
 		reg = < 0x6000d000 0x1000 >;
-		interrupts = < 64 65 66 67 87 119 121 >;
+		interrupts = < 0 32 0x04
+			       0 33 0x04
+			       0 34 0x04
+			       0 35 0x04
+			       0 55 0x04
+			       0 87 0x04
+			       0 89 0x04 >;
 		#gpio-cells = <2>;
 		gpio-controller;
 	};
@@ -89,59 +89,80 @@
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006000 0x40>;
 		reg-shift = <2>;
-		interrupts = < 68 >;
+		interrupts = < 0 36 0x04 >;
 	};
 
 	serial@70006040 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006040 0x40>;
 		reg-shift = <2>;
-		interrupts = < 69 >;
+		interrupts = < 0 37 0x04 >;
 	};
 
 	serial@70006200 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006200 0x100>;
 		reg-shift = <2>;
-		interrupts = < 78 >;
+		interrupts = < 0 46 0x04 >;
 	};
 
 	serial@70006300 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006300 0x100>;
 		reg-shift = <2>;
-		interrupts = < 122 >;
+		interrupts = < 0 90 0x04 >;
 	};
 
 	serial@70006400 {
 		compatible = "nvidia,tegra20-uart";
 		reg = <0x70006400 0x100>;
 		reg-shift = <2>;
-		interrupts = < 123 >;
+		interrupts = < 0 91 0x04 >;
 	};
 
 	sdhci@c8000000 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000000 0x200>;
-		interrupts = < 46 >;
+		interrupts = < 0 14 0x04 >;
 	};
 
 	sdhci@c8000200 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000200 0x200>;
-		interrupts = < 47 >;
+		interrupts = < 0 15 0x04 >;
 	};
 
 	sdhci@c8000400 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000400 0x200>;
-		interrupts = < 51 >;
+		interrupts = < 0 19 0x04 >;
 	};
 
 	sdhci@c8000600 {
 		compatible = "nvidia,tegra20-sdhci";
 		reg = <0xc8000600 0x200>;
-		interrupts = < 63 >;
+		interrupts = < 0 31 0x04 >;
+	};
+
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5000000 0x4000>;
+		interrupts = < 0 20 0x04 >;
+		phy_type = "utmi";
+	};
+
+	usb@c5004000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5004000 0x4000>;
+		interrupts = < 0 21 0x04 >;
+		phy_type = "ulpi";
+	};
+
+	usb@c5008000 {
+		compatible = "nvidia,tegra20-ehci", "usb-ehci";
+		reg = <0xc5008000 0x4000>;
+		interrupts = < 0 97 0x04 >;
+		phy_type = "utmi";
 	};
 };
 

arch/arm/boot/dts/tegra30.dtsi

@@ -0,0 +1,127 @@
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "nvidia,tegra30";
+	interrupt-parent = <&intc>;
+
+	intc: interrupt-controller@50041000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = < 0x50041000 0x1000 >,
+		      < 0x50040100 0x0100 >;
+	};
+
+	i2c@7000c000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible =  "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000C000 0x100>;
+		interrupts = < 0 38 0x04 >;
+	};
+
+	i2c@7000c400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000C400 0x100>;
+		interrupts = < 0 84 0x04 >;
+	};
+
+	i2c@7000c500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000C500 0x100>;
+		interrupts = < 0 92 0x04 >;
+	};
+
+	i2c@7000c700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000c700 0x100>;
+		interrupts = < 0 120 0x04 >;
+	};
+
+	i2c@7000d000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c";
+		reg = <0x7000D000 0x100>;
+		interrupts = < 0 53 0x04 >;
+	};
+
+	gpio: gpio@6000d000 {
+		compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
+		reg = < 0x6000d000 0x1000 >;
+		interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	serial@70006000 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006000 0x40>;
+		reg-shift = <2>;
+		interrupts = < 0 36 0x04 >;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006040 0x40>;
+		reg-shift = <2>;
+		interrupts = < 0 37 0x04 >;
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006200 0x100>;
+		reg-shift = <2>;
+		interrupts = < 0 46 0x04 >;
+	};
+
+	serial@70006300 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006300 0x100>;
+		reg-shift = <2>;
+		interrupts = < 0 90 0x04 >;
+	};
+
+	serial@70006400 {
+		compatible = "nvidia,tegra30-uart", "nvidia,tegra20-uart";
+		reg = <0x70006400 0x100>;
+		reg-shift = <2>;
+		interrupts = < 0 91 0x04 >;
+	};
+
+	sdhci@78000000 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000000 0x200>;
+		interrupts = < 0 14 0x04 >;
+	};
+
+	sdhci@78000200 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000200 0x200>;
+		interrupts = < 0 15 0x04 >;
+	};
+
+	sdhci@78000400 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000400 0x200>;
+		interrupts = < 0 19 0x04 >;
+	};
+
+	sdhci@78000600 {
+		compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci";
+		reg = <0x78000600 0x200>;
+		interrupts = < 0 31 0x04 >;
+	};
+
+	pinmux: pinmux@70000000 {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = < 0x70000868 0xd0     /* Pad control registers */
+			0x70003000 0x3e0 >; /* Mux registers */
+	};
+};

arch/arm/mach-tegra/Makefile

@@ -32,6 +32,8 @@ obj-$(CONFIG_MACH_SEABOARD)             += board-seaboard-pinmux.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-dt.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-harmony-pinmux.o
 obj-$(CONFIG_MACH_TEGRA_DT)             += board-seaboard-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-paz00-pinmux.o
+obj-$(CONFIG_MACH_TEGRA_DT)             += board-trimslice-pinmux.o
 
 obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice.o
 obj-$(CONFIG_MACH_TRIMSLICE)            += board-trimslice-pinmux.o

arch/arm/mach-tegra/Makefile.boot

@@ -3,5 +3,7 @@ params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00000100
 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC)	:= 0x00800000
 
 dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb
+dtb-$(CONFIG_MACH_PAZ00) += tegra-paz00.dtb
 dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb
+dtb-$(CONFIG_MACH_TRIMSLICE) += tegra-trimslice.dtb
 dtb-$(CONFIG_MACH_VENTANA) += tegra-ventana.dtb

arch/arm/mach-tegra/board-dt.c

@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/setup.h>
+#include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
 #include <mach/irqs.h>
@@ -46,9 +47,22 @@
 #include "devices.h"
 
 void harmony_pinmux_init(void);
+void paz00_pinmux_init(void);
 void seaboard_pinmux_init(void);
+void trimslice_pinmux_init(void);
 void ventana_pinmux_init(void);
 
+static const struct of_device_id tegra_dt_irq_match[] __initconst = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
+	{ }
+};
+
+void __init tegra_dt_init_irq(void)
+{
+	tegra_init_irq();
+	of_irq_init(tegra_dt_irq_match);
+}
+
 struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
@@ -57,16 +71,30 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2c-dvc", TEGRA_DVC_BASE, "tegra-i2c.3", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL),
-	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S2_BASE, "tegra-i2s.1", NULL),
 	OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL),
+	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB_BASE, "tegra-ehci.0",
+		       &tegra_ehci1_device.dev.platform_data),
+	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB2_BASE, "tegra-ehci.1",
+		       &tegra_ehci2_device.dev.platform_data),
+	OF_DEV_AUXDATA("nvidia,tegra20-ehci", TEGRA_USB3_BASE, "tegra-ehci.2",
+		       &tegra_ehci3_device.dev.platform_data),
 	{}
 };
 
 static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
 	/* name		parent		rate		enabled */
 	{ "uartd",	"pll_p",	216000000,	true },
+	{ "usbd",	"clk_m",	12000000,	false },
+	{ "usb2",	"clk_m",	12000000,	false },
+	{ "usb3",	"clk_m",	12000000,	false },
+	{ "pll_a",      "pll_p_out1",   56448000,       true },
+	{ "pll_a_out0", "pll_a",        11289600,       true },
+	{ "cdev1",      NULL,           0,              true },
+	{ "i2s1",       "pll_a_out0",   11289600,       false},
+	{ "i2s2",       "pll_a_out0",   11289600,       false},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -75,30 +103,21 @@ static struct of_device_id tegra_dt_match_table[] __initdata = {
 	{}
 };
 
-static struct of_device_id tegra_dt_gic_match[] __initdata = {
-	{ .compatible = "nvidia,tegra20-gic", },
-	{}
-};
-
 static struct {
 	char *machine;
 	void (*init)(void);
 } pinmux_configs[] = {
+	{ "compulab,trimslice", trimslice_pinmux_init },
 	{ "nvidia,harmony", harmony_pinmux_init },
+	{ "compal,paz00", paz00_pinmux_init },
 	{ "nvidia,seaboard", seaboard_pinmux_init },
 	{ "nvidia,ventana", ventana_pinmux_init },
 };
 
 static void __init tegra_dt_init(void)
 {
-	struct device_node *node;
 	int i;
 
-	node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match,
-						TEGRA_ARM_INT_DIST_BASE);
-	if (node)
-		irq_domain_add_simple(node, INT_GIC_BASE);
-
 	tegra_clk_init_from_table(tegra_dt_clk_init_table);
 
 	/*
@@ -120,7 +139,9 @@ static void __init tegra_dt_init(void)
 }
 
 static const char * tegra_dt_board_compat[] = {
+	"compulab,trimslice",
 	"nvidia,harmony",
+	"compal,paz00",
 	"nvidia,seaboard",
 	"nvidia,ventana",
 	NULL
@@ -129,7 +150,7 @@ static const char * tegra_dt_board_compat[] = {
 DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)")
 	.map_io		= tegra_map_common_io,
 	.init_early	= tegra_init_early,
-	.init_irq	= tegra_init_irq,
+	.init_irq	= tegra_dt_init_irq,
 	.timer		= &tegra_timer,
 	.init_machine	= tegra_dt_init,
 	.dt_compat	= tegra_dt_board_compat,

arch/arm/mach-tegra/irq.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/of.h>
 
 #include <asm/hardware/gic.h>
 
@@ -125,6 +126,11 @@ void __init tegra_init_irq(void)
 	gic_arch_extn.irq_unmask = tegra_unmask;
 	gic_arch_extn.irq_retrigger = tegra_retrigger;
 
-	gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
-		 IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
+	/*
+	 * Check if there is a devicetree present, since the GIC will be
+	 * initialized elsewhere under DT.
+	 */
+	if (!of_have_populated_dt())
+		gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
+			IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
 }

drivers/usb/host/ehci-tegra.c

@@ -21,7 +21,12 @@
 #include <linux/platform_data/tegra_usb.h>
 #include <linux/irq.h>
 #include <linux/usb/otg.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
 #include <mach/usb_phy.h>
+#include <mach/iomap.h>
 
 #define TEGRA_USB_DMA_ALIGN 32
 
@@ -574,6 +579,35 @@ static const struct hc_driver tegra_ehci_hc_driver = {
 	.port_handed_over	= ehci_port_handed_over,
 };
 
+static int setup_vbus_gpio(struct platform_device *pdev)
+{
+	int err = 0;
+	int gpio;
+
+	if (!pdev->dev.of_node)
+		return 0;
+
+	gpio = of_get_named_gpio(pdev->dev.of_node, "nvidia,vbus-gpio", 0);
+	if (!gpio_is_valid(gpio))
+		return 0;
+
+	err = gpio_request(gpio, "vbus_gpio");
+	if (err) {
+		dev_err(&pdev->dev, "can't request vbus gpio %d", gpio);
+		return err;
+	}
+	err = gpio_direction_output(gpio, 1);
+	if (err) {
+		dev_err(&pdev->dev, "can't enable vbus\n");
+		return err;
+	}
+	gpio_set_value(gpio, 1);
+
+	return err;
+}
+
+static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
+
 static int tegra_ehci_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -590,6 +624,15 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	/* Right now device-tree probed devices don't get dma_mask set.
+	 * Since shared usb code relies on it, set it here for now.
+	 * Once we have dma capability bindings this can go away.
+	 */
+	if (!pdev->dev.dma_mask)
+		pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+
+	setup_vbus_gpio(pdev);
+
 	tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL);
 	if (!tegra)
 		return -ENOMEM;
@@ -640,6 +683,28 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 		goto fail_io;
 	}
 
+	/* This is pretty ugly and needs to be fixed when we do only
+	 * device-tree probing. Old code relies on the platform_device
+	 * numbering that we lack for device-tree-instantiated devices.
+	 */
+	if (instance < 0) {
+		switch (res->start) {
+		case TEGRA_USB_BASE:
+			instance = 0;
+			break;
+		case TEGRA_USB2_BASE:
+			instance = 1;
+			break;
+		case TEGRA_USB3_BASE:
+			instance = 2;
+			break;
+		default:
+			err = -ENODEV;
+			dev_err(&pdev->dev, "unknown usb instance\n");
+			goto fail_phy;
+		}
+	}
+
 	tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config,
 						TEGRA_USB_PHY_MODE_HOST);
 	if (IS_ERR(tegra->phy)) {
@@ -773,6 +838,11 @@ static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
 		hcd->driver->shutdown(hcd);
 }
 
+static struct of_device_id tegra_ehci_of_match[] __devinitdata = {
+	{ .compatible = "nvidia,tegra20-ehci", },
+	{ },
+};
+
 static struct platform_driver tegra_ehci_driver = {
 	.probe		= tegra_ehci_probe,
 	.remove		= tegra_ehci_remove,
@@ -783,5 +853,6 @@ static struct platform_driver tegra_ehci_driver = {
 	.shutdown	= tegra_ehci_hcd_shutdown,
 	.driver		= {
 		.name	= "tegra-ehci",
+		.of_match_table = tegra_ehci_of_match,
 	}
 };