ARM: OMAP3: igep0020: Adapt to ehci-omap changes

Use usbhs_init_phys() to register the PHY's RESET regulators
and the NOP PHY devices.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/board-igep0020.c

@@ -527,26 +527,28 @@ static void __init igep_i2c_init(void)
 	omap3_pmic_init("twl4030", &igep_twldata);
 }
 
+static struct usbhs_phy_data igep2_phy_data[] __initdata = {
+	{
+		.port = 1,
+		.reset_gpio = IGEP2_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
+static struct usbhs_phy_data igep3_phy_data[] __initdata = {
+	{
+		.port = 2,
+		.reset_gpio = IGEP3_GPIO_USBH_NRESET,
+		.vcc_gpio = -EINVAL,
+	},
+};
+
 static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
-	.reset_gpio_port[1] = -EINVAL,
-	.reset_gpio_port[2] = -EINVAL,
 };
 
 static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = {
-	.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
-
-	.phy_reset = true,
-	.reset_gpio_port[0] = -EINVAL,
-	.reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET,
-	.reset_gpio_port[2] = -EINVAL,
 };
 
 #ifdef CONFIG_OMAP_MUX
@@ -642,8 +644,10 @@ static void __init igep_init(void)
 	if (machine_is_igep0020()) {
 		omap_display_init(&igep2_dss_data);
 		igep2_init_smsc911x();
+		usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data));
 		usbhs_init(&igep2_usbhs_bdata);
 	} else {
+		usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data));
 		usbhs_init(&igep3_usbhs_bdata);
 	}
 }