Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6

drivers/acpi/Kconfig

@@ -260,6 +260,9 @@ config ACPI_ASUS
 config ACPI_TOSHIBA
 	tristate "Toshiba Laptop Extras"
 	depends on X86
+	select INPUT_POLLDEV
+	select NET
+	select RFKILL
 	select BACKLIGHT_CLASS_DEVICE
 	---help---
 	  This driver adds support for access to certain system settings

drivers/acpi/toshiba_acpi.c

@@ -3,6 +3,7 @@
  *
  *
  *  Copyright (C) 2002-2004 John Belmonte
+ *  Copyright (C) 2008 Philip Langdale
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -33,7 +34,7 @@
  *
  */
 
-#define TOSHIBA_ACPI_VERSION	"0.18"
+#define TOSHIBA_ACPI_VERSION	"0.19"
 #define PROC_INTERFACE_VERSION	1
 
 #include <linux/kernel.h>
@@ -42,6 +43,9 @@
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/backlight.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/input-polldev.h>
 
 #include <asm/uaccess.h>
 
@@ -90,6 +94,7 @@ MODULE_LICENSE("GPL");
 #define HCI_VIDEO_OUT			0x001c
 #define HCI_HOTKEY_EVENT		0x001e
 #define HCI_LCD_BRIGHTNESS		0x002a
+#define HCI_WIRELESS			0x0056
 
 /* field definitions */
 #define HCI_LCD_BRIGHTNESS_BITS		3
@@ -98,9 +103,14 @@ MODULE_LICENSE("GPL");
 #define HCI_VIDEO_OUT_LCD		0x1
 #define HCI_VIDEO_OUT_CRT		0x2
 #define HCI_VIDEO_OUT_TV		0x4
+#define HCI_WIRELESS_KILL_SWITCH	0x01
+#define HCI_WIRELESS_BT_PRESENT		0x0f
+#define HCI_WIRELESS_BT_ATTACH		0x40
+#define HCI_WIRELESS_BT_POWER		0x80
 
 static const struct acpi_device_id toshiba_device_ids[] = {
 	{"TOS6200", 0},
+	{"TOS6208", 0},
 	{"TOS1900", 0},
 	{"", 0},
 };
@@ -193,7 +203,7 @@ static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS])
 	return status;
 }
 
-/* common hci tasks (get or set one value)
+/* common hci tasks (get or set one or two value)
  *
  * In addition to the ACPI status, the HCI system returns a result which
  * may be useful (such as "not supported").
@@ -218,6 +228,152 @@ static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result)
 	return status;
 }
 
+static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32 *result)
+{
+	u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status = hci_raw(in, out);
+	*result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+	return status;
+}
+
+static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result)
+{
+	u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
+	u32 out[HCI_WORDS];
+	acpi_status status = hci_raw(in, out);
+	*out1 = out[2];
+	*out2 = out[3];
+	*result = (status == AE_OK) ? out[0] : HCI_FAILURE;
+	return status;
+}
+
+struct toshiba_acpi_dev {
+	struct platform_device *p_dev;
+	struct rfkill *rfk_dev;
+	struct input_polled_dev *poll_dev;
+
+	const char *bt_name;
+	const char *rfk_name;
+
+	bool last_rfk_state;
+
+	struct mutex mutex;
+};
+
+static struct toshiba_acpi_dev toshiba_acpi = {
+	.bt_name = "Toshiba Bluetooth",
+	.rfk_name = "Toshiba RFKill Switch",
+	.last_rfk_state = false,
+};
+
+/* Bluetooth rfkill handlers */
+
+static u32 hci_get_bt_present(bool *present)
+{
+	u32 hci_result;
+	u32 value, value2;
+
+	value = 0;
+	value2 = 0;
+	hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+	if (hci_result == HCI_SUCCESS)
+		*present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
+
+	return hci_result;
+}
+
+static u32 hci_get_bt_on(bool *on)
+{
+	u32 hci_result;
+	u32 value, value2;
+
+	value = 0;
+	value2 = 0x0001;
+	hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+	if (hci_result == HCI_SUCCESS)
+		*on = (value & HCI_WIRELESS_BT_POWER) &&
+		      (value & HCI_WIRELESS_BT_ATTACH);
+
+	return hci_result;
+}
+
+static u32 hci_get_radio_state(bool *radio_state)
+{
+	u32 hci_result;
+	u32 value, value2;
+
+	value = 0;
+	value2 = 0x0001;
+	hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
+
+	*radio_state = value & HCI_WIRELESS_KILL_SWITCH;
+	return hci_result;
+}
+
+static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
+{
+	u32 result1, result2;
+	u32 value;
+	bool radio_state;
+	struct toshiba_acpi_dev *dev = data;
+
+	value = (state == RFKILL_STATE_UNBLOCKED);
+
+	if (hci_get_radio_state(&radio_state) != HCI_SUCCESS)
+		return -EFAULT;
+
+	switch (state) {
+	case RFKILL_STATE_UNBLOCKED:
+		if (!radio_state)
+			return -EPERM;
+		break;
+	case RFKILL_STATE_SOFT_BLOCKED:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->mutex);
+	hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
+	hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
+	mutex_unlock(&dev->mutex);
+
+	if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS)
+		return -EFAULT;
+
+	return 0;
+}
+
+static void bt_poll_rfkill(struct input_polled_dev *poll_dev)
+{
+	bool state_changed;
+	bool new_rfk_state;
+	bool value;
+	u32 hci_result;
+	struct toshiba_acpi_dev *dev = poll_dev->private;
+
+	hci_result = hci_get_radio_state(&value);
+	if (hci_result != HCI_SUCCESS)
+		return; /* Can't do anything useful */
+
+	new_rfk_state = value;
+
+	mutex_lock(&dev->mutex);
+	state_changed = new_rfk_state != dev->last_rfk_state;
+	dev->last_rfk_state = new_rfk_state;
+	mutex_unlock(&dev->mutex);
+
+	if (unlikely(state_changed)) {
+		rfkill_force_state(dev->rfk_dev,
+				   new_rfk_state ?
+				   RFKILL_STATE_SOFT_BLOCKED :
+				   RFKILL_STATE_HARD_BLOCKED);
+		input_report_switch(poll_dev->input, SW_RFKILL_ALL,
+				    new_rfk_state);
+	}
+}
+
 static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
 static struct backlight_device *toshiba_backlight_device;
 static int force_fan;
@@ -547,6 +703,14 @@ static struct backlight_ops toshiba_backlight_data = {
 
 static void toshiba_acpi_exit(void)
 {
+	if (toshiba_acpi.poll_dev) {
+		input_unregister_polled_device(toshiba_acpi.poll_dev);
+		input_free_polled_device(toshiba_acpi.poll_dev);
+	}
+
+	if (toshiba_acpi.rfk_dev)
+		rfkill_unregister(toshiba_acpi.rfk_dev);
+
 	if (toshiba_backlight_device)
 		backlight_device_unregister(toshiba_backlight_device);
 
@@ -555,6 +719,8 @@ static void toshiba_acpi_exit(void)
 	if (toshiba_proc_dir)
 		remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
 
+	platform_device_unregister(toshiba_acpi.p_dev);
+
 	return;
 }
 
@@ -562,6 +728,10 @@ static int __init toshiba_acpi_init(void)
 {
 	acpi_status status = AE_OK;
 	u32 hci_result;
+	bool bt_present;
+	bool bt_on;
+	bool radio_on;
+	int ret = 0;
 
 	if (acpi_disabled)
 		return -ENODEV;
@@ -578,6 +748,18 @@ static int __init toshiba_acpi_init(void)
 	       TOSHIBA_ACPI_VERSION);
 	printk(MY_INFO "    HCI method: %s\n", method_hci);
 
+	mutex_init(&toshiba_acpi.mutex);
+
+	toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi",
+							      -1, NULL, 0);
+	if (IS_ERR(toshiba_acpi.p_dev)) {
+		ret = PTR_ERR(toshiba_acpi.p_dev);
+		printk(MY_ERR "unable to register platform device\n");
+		toshiba_acpi.p_dev = NULL;
+		toshiba_acpi_exit();
+		return ret;
+	}
+
 	force_fan = 0;
 	key_event_valid = 0;
 
@@ -586,19 +768,23 @@ static int __init toshiba_acpi_init(void)
 
 	toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir);
 	if (!toshiba_proc_dir) {
-		status = AE_ERROR;
+		toshiba_acpi_exit();
+		return -ENODEV;
 	} else {
 		toshiba_proc_dir->owner = THIS_MODULE;
 		status = add_device();
-		if (ACPI_FAILURE(status))
-			remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
+		if (ACPI_FAILURE(status)) {
+			toshiba_acpi_exit();
+			return -ENODEV;
+		}
 	}
 
-	toshiba_backlight_device = backlight_device_register("toshiba",NULL,
+	toshiba_backlight_device = backlight_device_register("toshiba",
+						&toshiba_acpi.p_dev->dev,
 						NULL,
 						&toshiba_backlight_data);
         if (IS_ERR(toshiba_backlight_device)) {
-		int ret = PTR_ERR(toshiba_backlight_device);
+		ret = PTR_ERR(toshiba_backlight_device);
 
 		printk(KERN_ERR "Could not register toshiba backlight device\n");
 		toshiba_backlight_device = NULL;
@@ -607,7 +793,66 @@ static int __init toshiba_acpi_init(void)
 	}
         toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
 
-	return (ACPI_SUCCESS(status)) ? 0 : -ENODEV;
+	/* Register rfkill switch for Bluetooth */
+	if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
+		toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev,
+							RFKILL_TYPE_BLUETOOTH);
+		if (!toshiba_acpi.rfk_dev) {
+			printk(MY_ERR "unable to allocate rfkill device\n");
+			toshiba_acpi_exit();
+			return -ENOMEM;
+		}
+
+		toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name;
+		toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio;
+		toshiba_acpi.rfk_dev->user_claim_unsupported = 1;
+		toshiba_acpi.rfk_dev->data = &toshiba_acpi;
+
+		if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) {
+			toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED;
+		} else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS &&
+			   radio_on) {
+			toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED;
+		} else {
+			toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED;
+		}
+
+		ret = rfkill_register(toshiba_acpi.rfk_dev);
+		if (ret) {
+			printk(MY_ERR "unable to register rfkill device\n");
+			toshiba_acpi_exit();
+			return -ENOMEM;
+		}
+	}
+
+	/* Register input device for kill switch */
+	toshiba_acpi.poll_dev = input_allocate_polled_device();
+	if (!toshiba_acpi.poll_dev) {
+		printk(MY_ERR "unable to allocate kill-switch input device\n");
+		toshiba_acpi_exit();
+		return -ENOMEM;
+	}
+	toshiba_acpi.poll_dev->private = &toshiba_acpi;
+	toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
+	toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
+
+	toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
+	toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
+	toshiba_acpi.poll_dev->input->id.vendor = 0x0930; /* Toshiba USB ID */
+	set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
+	set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
+	input_report_switch(toshiba_acpi.poll_dev->input, SW_RFKILL_ALL, TRUE);
+
+	ret = input_register_polled_device(toshiba_acpi.poll_dev);
+	if (ret) {
+		printk(MY_ERR "unable to register kill-switch input device\n");
+		rfkill_free(toshiba_acpi.rfk_dev);
+		toshiba_acpi.rfk_dev = NULL;
+		toshiba_acpi_exit();
+		return ret;
+	}
+
+	return 0;
 }
 
 module_init(toshiba_acpi_init);

drivers/net/wireless/adm8211.c

@@ -1884,6 +1884,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
 	dev->extra_tx_headroom = sizeof(struct adm8211_tx_hdr);
 	/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS in promisc mode */
 	dev->flags = IEEE80211_HW_SIGNAL_UNSPEC;
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
 	dev->channel_change_time = 1000;
 	dev->max_signal = 100;    /* FIXME: find better value */

drivers/net/wireless/ath5k/Makefile

@@ -1,6 +1,14 @@
-ath5k-y				+= base.o
-ath5k-y				+= hw.o
+ath5k-y				+= caps.o
 ath5k-y				+= initvals.o
+ath5k-y				+= eeprom.o
+ath5k-y				+= gpio.o
+ath5k-y				+= desc.o
+ath5k-y				+= dma.o
+ath5k-y				+= qcu.o
+ath5k-y				+= pcu.o
 ath5k-y				+= phy.o
+ath5k-y				+= reset.o
+ath5k-y				+= attach.o
+ath5k-y				+= base.o
 ath5k-$(CONFIG_ATH5K_DEBUG)	+= debug.o
 obj-$(CONFIG_ATH5K)		+= ath5k.o

drivers/net/wireless/ath5k/ath5k.h

@@ -18,18 +18,23 @@
 #ifndef _ATH5K_H
 #define _ATH5K_H
 
-/* Set this to 1 to disable regulatory domain restrictions for channel tests.
- * WARNING: This is for debuging only and has side effects (eg. scan takes too
- * long and results timeouts). It's also illegal to tune to some of the
- * supported frequencies in some countries, so use this at your own risk,
- * you've been warned. */
+/* TODO: Clean up channel debuging -doesn't work anyway- and start
+ * working on reg. control code using all available eeprom information
+ * -rev. engineering needed- */
 #define CHAN_DEBUG	0
 
 #include <linux/io.h>
 #include <linux/types.h>
 #include <net/mac80211.h>
 
-#include "hw.h"
+/* RX/TX descriptor hw structs
+ * TODO: Driver part should only see sw structs */
+#include "desc.h"
+
+/* EEPROM structs/offsets
+ * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
+ * and clean up common bits, then introduce set/get functions in eeprom.c */
+#include "eeprom.h"
 
 /* PCI IDs */
 #define PCI_DEVICE_ID_ATHEROS_AR5210 		0x0007 /* AR5210 */
@@ -86,8 +91,93 @@
 #define ATH5K_ERR(_sc, _fmt, ...) \
 	ATH5K_PRINTK_LIMIT(_sc, KERN_ERR, _fmt, ##__VA_ARGS__)
 
+/*
+ * AR5K REGISTER ACCESS
+ */
+
+/* Some macros to read/write fields */
+
+/* First shift, then mask */
+#define AR5K_REG_SM(_val, _flags)					\
+	(((_val) << _flags##_S) & (_flags))
+
+/* First mask, then shift */
+#define AR5K_REG_MS(_val, _flags)					\
+	(((_val) & (_flags)) >> _flags##_S)
+
+/* Some registers can hold multiple values of interest. For this
+ * reason when we want to write to these registers we must first
+ * retrieve the values which we do not want to clear (lets call this
+ * old_data) and then set the register with this and our new_value:
+ * ( old_data | new_value) */
+#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)			\
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
+	    (((_val) << _flags##_S) & (_flags)), _reg)
+
+#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)			\
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &		\
+			(_mask)) | (_flags), _reg)
+
+#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)				\
+	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
+
+#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)			\
+	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
+
+/* Access to PHY registers */
+#define AR5K_PHY_READ(ah, _reg)					\
+	ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
+
+#define AR5K_PHY_WRITE(ah, _reg, _val)					\
+	ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
+
+/* Access QCU registers per queue */
+#define AR5K_REG_READ_Q(ah, _reg, _queue)				\
+	(ath5k_hw_reg_read(ah, _reg) & (1 << _queue))			\
+
+#define AR5K_REG_WRITE_Q(ah, _reg, _queue)				\
+	ath5k_hw_reg_write(ah, (1 << _queue), _reg)
+
+#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {				\
+	_reg |= 1 << _queue;						\
+} while (0)
+
+#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {				\
+	_reg &= ~(1 << _queue);						\
+} while (0)
+
+/* Used while writing initvals */
+#define AR5K_REG_WAIT(_i) do {						\
+	if (_i % 64)							\
+		udelay(1);						\
+} while (0)
+
+/* Register dumps are done per operation mode */
+#define AR5K_INI_RFGAIN_5GHZ		0
+#define AR5K_INI_RFGAIN_2GHZ		1
+
+/* TODO: Clean this up */
+#define AR5K_INI_VAL_11A		0
+#define AR5K_INI_VAL_11A_TURBO		1
+#define AR5K_INI_VAL_11B		2
+#define AR5K_INI_VAL_11G		3
+#define AR5K_INI_VAL_11G_TURBO		4
+#define AR5K_INI_VAL_XR			0
+#define AR5K_INI_VAL_MAX		5
+
+#define AR5K_RF5111_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
+#define AR5K_RF5112_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
+
+/* Used for BSSID etc manipulation */
+#define AR5K_LOW_ID(_a)(				\
+(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24	\
+)
+
+#define AR5K_HIGH_ID(_a)	((_a)[4] | (_a)[5] << 8)
+
 /*
  * Some tuneable values (these should be changeable by the user)
+ * TODO: Make use of them and add more options OR use debug/configfs
  */
 #define AR5K_TUNE_DMA_BEACON_RESP		2
 #define AR5K_TUNE_SW_BEACON_RESP		10
@@ -98,13 +188,13 @@
 #define AR5K_TUNE_REGISTER_TIMEOUT		20000
 /* Register for RSSI threshold has a mask of 0xff, so 255 seems to
  * be the max value. */
-#define AR5K_TUNE_RSSI_THRES                   129
+#define AR5K_TUNE_RSSI_THRES			129
 /* This must be set when setting the RSSI threshold otherwise it can
  * prevent a reset. If AR5K_RSSI_THR is read after writing to it
  * the BMISS_THRES will be seen as 0, seems harware doesn't keep
  * track of it. Max value depends on harware. For AR5210 this is just 7.
  * For AR5211+ this seems to be up to 255. */
-#define AR5K_TUNE_BMISS_THRES                  7
+#define AR5K_TUNE_BMISS_THRES			7
 #define AR5K_TUNE_REGISTER_DWELL_TIME		20000
 #define AR5K_TUNE_BEACON_INTERVAL		100
 #define AR5K_TUNE_AIFS				2
@@ -123,6 +213,55 @@
 #define AR5K_TUNE_ANT_DIVERSITY			true
 #define AR5K_TUNE_HWTXTRIES			4
 
+#define AR5K_INIT_CARR_SENSE_EN			1
+
+/*Swap RX/TX Descriptor for big endian archs*/
+#if defined(__BIG_ENDIAN)
+#define AR5K_INIT_CFG	(		\
+	AR5K_CFG_SWTD | AR5K_CFG_SWRD	\
+)
+#else
+#define AR5K_INIT_CFG	0x00000000
+#endif
+
+/* Initial values */
+#define AR5K_INIT_TX_LATENCY			502
+#define AR5K_INIT_USEC				39
+#define AR5K_INIT_USEC_TURBO			79
+#define AR5K_INIT_USEC_32			31
+#define AR5K_INIT_SLOT_TIME			396
+#define AR5K_INIT_SLOT_TIME_TURBO		480
+#define AR5K_INIT_ACK_CTS_TIMEOUT		1024
+#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO		0x08000800
+#define AR5K_INIT_PROG_IFS			920
+#define AR5K_INIT_PROG_IFS_TURBO		960
+#define AR5K_INIT_EIFS				3440
+#define AR5K_INIT_EIFS_TURBO			6880
+#define AR5K_INIT_SIFS				560
+#define AR5K_INIT_SIFS_TURBO			480
+#define AR5K_INIT_SH_RETRY			10
+#define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
+#define AR5K_INIT_SSH_RETRY			32
+#define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
+#define AR5K_INIT_TX_RETRY			10
+
+#define AR5K_INIT_TRANSMIT_LATENCY		(			\
+	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
+	(AR5K_INIT_USEC)						\
+)
+#define AR5K_INIT_TRANSMIT_LATENCY_TURBO	(			\
+	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
+	(AR5K_INIT_USEC_TURBO)						\
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL		(			\
+	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |	\
+	(AR5K_INIT_PROG_IFS)						\
+)
+#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO	(			\
+	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
+	(AR5K_INIT_PROG_IFS_TURBO)					\
+)
+
 /* token to use for aifs, cwmin, cwmax in MadWiFi */
 #define	AR5K_TXQ_USEDEFAULT	((u32) -1)
 
@@ -196,7 +335,6 @@ struct ath5k_srev_name {
 #define AR5K_SREV_RAD_5133	0xc0	/* MIMO found on 5418 */
 
 /* IEEE defs */
-
 #define IEEE80211_MAX_LEN       2500
 
 /* TODO add support to mac80211 for vendor-specific rates and modes */
@@ -268,16 +406,13 @@ enum ath5k_driver_mode {
 	AR5K_MODE_MAX		=	5
 };
 
-/* adding this flag to rate_code enables short preamble, see ar5212_reg.h */
-#define AR5K_SET_SHORT_PREAMBLE 0x04
-
 
 /****************\
   TX DEFINITIONS
 \****************/
 
 /*
- * TX Status
+ * TX Status descriptor
  */
 struct ath5k_tx_status {
 	u16	ts_seqnum;
@@ -349,7 +484,6 @@ enum ath5k_tx_queue_id {
 	AR5K_TX_QUEUE_ID_XR_DATA	= 9,
 };
 
-
 /*
  * Flags to set hw queue's parameters...
  */
@@ -382,7 +516,8 @@ struct ath5k_txq_info {
 
 /*
  * Transmit packet types.
- * These are not fully used inside OpenHAL yet
+ * used on tx control descriptor
+ * TODO: Use them inside base.c corectly
  */
 enum ath5k_pkt_type {
 	AR5K_PKT_TYPE_NORMAL		= 0,
@@ -425,7 +560,7 @@ enum ath5k_dmasize {
 \****************/
 
 /*
- * RX Status
+ * RX Status descriptor
  */
 struct ath5k_rx_status {
 	u16	rs_datalen;
@@ -489,34 +624,59 @@ struct ath5k_beacon_state {
 #define TSF_TO_TU(_tsf) (u32)((_tsf) >> 10)
 
 
+/*******************************\
+  GAIN OPTIMIZATION DEFINITIONS
+\*******************************/
+
+enum ath5k_rfgain {
+	AR5K_RFGAIN_INACTIVE = 0,
+	AR5K_RFGAIN_READ_REQUESTED,
+	AR5K_RFGAIN_NEED_CHANGE,
+};
+
+#define AR5K_GAIN_CRN_FIX_BITS_5111		4
+#define AR5K_GAIN_CRN_FIX_BITS_5112		7
+#define AR5K_GAIN_CRN_MAX_FIX_BITS		AR5K_GAIN_CRN_FIX_BITS_5112
+#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN		15
+#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN		20
+#define AR5K_GAIN_CCK_PROBE_CORR		5
+#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA		15
+#define AR5K_GAIN_STEP_COUNT			10
+#define AR5K_GAIN_PARAM_TX_CLIP			0
+#define AR5K_GAIN_PARAM_PD_90			1
+#define AR5K_GAIN_PARAM_PD_84			2
+#define AR5K_GAIN_PARAM_GAIN_SEL		3
+#define AR5K_GAIN_PARAM_MIX_ORN			0
+#define AR5K_GAIN_PARAM_PD_138			1
+#define AR5K_GAIN_PARAM_PD_137			2
+#define AR5K_GAIN_PARAM_PD_136			3
+#define AR5K_GAIN_PARAM_PD_132			4
+#define AR5K_GAIN_PARAM_PD_131			5
+#define AR5K_GAIN_PARAM_PD_130			6
+#define AR5K_GAIN_CHECK_ADJUST(_g) 		\
+	((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
+
+struct ath5k_gain_opt_step {
+	s16				gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
+	s32				gos_gain;
+};
+
+struct ath5k_gain {
+	u32			g_step_idx;
+	u32			g_current;
+	u32			g_target;
+	u32			g_low;
+	u32			g_high;
+	u32			g_f_corr;
+	u32			g_active;
+	const struct ath5k_gain_opt_step	*g_step;
+};
+
+
 /********************\
   COMMON DEFINITIONS
 \********************/
 
-/*
- * Atheros hardware descriptor
- * This is read and written to by the hardware
- */
-struct ath5k_desc {
-	u32	ds_link;	/* physical address of the next descriptor */
-	u32	ds_data;	/* physical address of data buffer (skb) */
-
-	union {
-		struct ath5k_hw_5210_tx_desc	ds_tx5210;
-		struct ath5k_hw_5212_tx_desc	ds_tx5212;
-		struct ath5k_hw_all_rx_desc	ds_rx;
-	} ud;
-} __packed;
-
-#define AR5K_RXDESC_INTREQ	0x0020
-
-#define AR5K_TXDESC_CLRDMASK	0x0001
-#define AR5K_TXDESC_NOACK	0x0002	/*[5211+]*/
-#define AR5K_TXDESC_RTSENA	0x0004
-#define AR5K_TXDESC_CTSENA	0x0008
-#define AR5K_TXDESC_INTREQ	0x0010
-#define AR5K_TXDESC_VEOL	0x0020	/*[5211+]*/
-
 #define AR5K_SLOT_TIME_9	396
 #define AR5K_SLOT_TIME_20	880
 #define AR5K_SLOT_TIME_MAX	0xffff
@@ -548,15 +708,16 @@ struct ath5k_desc {
 #define CHANNEL_MODES		CHANNEL_ALL
 
 /*
- * Used internaly in OpenHAL (ar5211.c/ar5212.c
- * for reset_tx_queue). Also see struct struct ieee80211_channel.
+ * Used internaly for reset_tx_queue).
+ * Also see struct struct ieee80211_channel.
  */
 #define IS_CHAN_XR(_c)	((_c.hw_value & CHANNEL_XR) != 0)
 #define IS_CHAN_B(_c)	((_c.hw_value & CHANNEL_B) != 0)
 
 /*
- * The following structure will be used to map 2GHz channels to
+ * The following structure is used to map 2GHz channels to
  * 5GHz Atheros channels.
+ * TODO: Clean up
  */
 struct ath5k_athchan_2ghz {
 	u32	a2_flags;
@@ -564,9 +725,9 @@ struct ath5k_athchan_2ghz {
 };
 
 
-/*
- * Rate definitions
- */
+/******************\
+  RATE DEFINITIONS
+\******************/
 
 /**
  * Seems the ar5xxx harware supports up to 32 rates, indexed by 1-32.
@@ -618,6 +779,8 @@ struct ath5k_athchan_2ghz {
 #define ATH5K_RATE_CODE_XR_2M	0x06
 #define ATH5K_RATE_CODE_XR_3M	0x01
 
+/* adding this flag to rate_code enables short preamble */
+#define AR5K_SET_SHORT_PREAMBLE 0x04
 
 /*
  * Crypto definitions
@@ -639,7 +802,6 @@ struct ath5k_athchan_2ghz {
 		return (false);			\
 } while (0)
 
-
 enum ath5k_ant_setting {
 	AR5K_ANT_VARIABLE	= 0,	/* variable by programming */
 	AR5K_ANT_FIXED_A	= 1,	/* fixed to 11a frequencies */
@@ -750,7 +912,8 @@ enum ath5k_power_mode {
 
 /*
  * These match net80211 definitions (not used in
- * d80211).
+ * mac80211).
+ * TODO: Clean this up
  */
 #define AR5K_LED_INIT	0 /*IEEE80211_S_INIT*/
 #define AR5K_LED_SCAN	1 /*IEEE80211_S_SCAN*/
@@ -766,7 +929,8 @@ enum ath5k_power_mode {
 /*
  * Chipset capabilities -see ath5k_hw_get_capability-
  * get_capability function is not yet fully implemented
- * in OpenHAL so most of these don't work yet...
+ * in ath5k so most of these don't work yet...
+ * TODO: Implement these & merge with _TUNE_ stuff above
  */
 enum ath5k_capability_type {
 	AR5K_CAP_REG_DMN		= 0,	/* Used to get current reg. domain id */
@@ -835,6 +999,7 @@ struct ath5k_capabilities {
 #define AR5K_MAX_GPIO		10
 #define AR5K_MAX_RF_BANKS	8
 
+/* TODO: Clean up and merge with ath5k_softc */
 struct ath5k_hw {
 	u32			ah_magic;
 
@@ -927,11 +1092,13 @@ struct ath5k_hw {
 	/*
 	 * Function pointers
 	 */
+	int (*ah_setup_rx_desc)(struct ath5k_hw *ah, struct ath5k_desc *desc,
+				u32 size, unsigned int flags);
 	int (*ah_setup_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
 		unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
 		unsigned int, unsigned int, unsigned int, unsigned int,
 		unsigned int, unsigned int, unsigned int);
-	int (*ah_setup_xtx_desc)(struct ath5k_hw *, struct ath5k_desc *,
+	int (*ah_setup_mrr_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
 		unsigned int, unsigned int, unsigned int, unsigned int,
 		unsigned int, unsigned int);
 	int (*ah_proc_tx_desc)(struct ath5k_hw *, struct ath5k_desc *,
@@ -944,33 +1111,38 @@ struct ath5k_hw {
  * Prototypes
  */
 
-/* General Functions */
-extern int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val, bool is_set);
 /* Attach/Detach Functions */
 extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version);
-extern const struct ath5k_rate_table *ath5k_hw_get_rate_table(struct ath5k_hw *ah, unsigned int mode);
 extern void ath5k_hw_detach(struct ath5k_hw *ah);
+
 /* Reset Functions */
+extern int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial);
 extern int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode, struct ieee80211_channel *channel, bool change_channel);
 /* Power management functions */
 extern int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode, bool set_chip, u16 sleep_duration);
+
 /* DMA Related Functions */
-extern void ath5k_hw_start_rx(struct ath5k_hw *ah);
+extern void ath5k_hw_start_rx_dma(struct ath5k_hw *ah);
 extern int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah);
-extern u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah);
-extern void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr);
-extern int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue);
+extern u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah);
+extern void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr);
+extern int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue);
 extern int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue);
-extern u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue);
-extern int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr);
+extern u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue);
+extern int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue,
+				u32 phys_addr);
 extern int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase);
 /* Interrupt handling */
 extern bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah);
 extern int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask);
-extern enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask);
+extern enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum
+ath5k_int new_mask);
 extern void ath5k_hw_update_mib_counters(struct ath5k_hw *ah, struct ieee80211_low_level_stats *stats);
+
 /* EEPROM access functions */
-extern int ath5k_hw_set_regdomain(struct ath5k_hw *ah, u16 regdomain);
+extern int ath5k_eeprom_init(struct ath5k_hw *ah);
+extern int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac);
+
 /* Protocol Control Unit Functions */
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
 /* BSSID Functions */
@@ -980,14 +1152,14 @@ extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc
 extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
 /* Receive start/stop functions */
 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
-extern void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah);
+extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
 /* RX Filter functions */
 extern void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1);
-extern int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index);
+extern int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
 extern int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index);
 extern u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah);
 extern void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter);
-/* Beacon related functions */
+/* Beacon control functions */
 extern u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah);
 extern u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah);
 extern void ath5k_hw_reset_tsf(struct ath5k_hw *ah);
@@ -1009,61 +1181,129 @@ extern int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry);
 extern int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry);
 extern int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry, const struct ieee80211_key_conf *key, const u8 *mac);
 extern int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac);
+
 /* Queue Control Unit, DFS Control Unit Functions */
-extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type, struct ath5k_txq_info *queue_info);
-extern int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue, const struct ath5k_txq_info *queue_info);
 extern int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue, struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+				const struct ath5k_txq_info *queue_info);
+extern int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah,
+				enum ath5k_tx_queue queue_type,
+				struct ath5k_txq_info *queue_info);
+extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
 extern void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue);
 extern int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue);
-extern u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue);
-extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
 extern unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah);
+extern int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time);
+
 /* Hardware Descriptor Functions */
-extern int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc, u32 size, unsigned int flags);
+extern int ath5k_hw_init_desc_functions(struct ath5k_hw *ah);
+
 /* GPIO Functions */
 extern void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state);
-extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
 extern int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio);
+extern int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio);
 extern u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio);
 extern int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val);
 extern void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio, u32 interrupt_level);
+
 /* Misc functions */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah);
 extern int ath5k_hw_get_capability(struct ath5k_hw *ah, enum ath5k_capability_type cap_type, u32 capability, u32 *result);
-
+extern int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid, u16 assoc_id);
+extern int ath5k_hw_disable_pspoll(struct ath5k_hw *ah);
 
 /* Initial register settings functions */
 extern int ath5k_hw_write_initvals(struct ath5k_hw *ah, u8 mode, bool change_channel);
+
 /* Initialize RF */
 extern int ath5k_hw_rfregs(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int mode);
 extern int ath5k_hw_rfgain(struct ath5k_hw *ah, unsigned int freq);
 extern enum ath5k_rfgain ath5k_hw_get_rf_gain(struct ath5k_hw *ah);
 extern int ath5k_hw_set_rfgain_opt(struct ath5k_hw *ah);
-
-
 /* PHY/RF channel functions */
 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 /* PHY calibration */
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
-extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
+extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
 /* Misc PHY functions */
 extern u16 ath5k_hw_radio_revision(struct ath5k_hw *ah, unsigned int chan);
 extern void ath5k_hw_set_def_antenna(struct ath5k_hw *ah, unsigned int ant);
 extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
-extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
 /* TX power setup */
 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, unsigned int txpower);
 extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power);
 
+/*
+ * Functions used internaly
+ */
+
+/*
+ * Translate usec to hw clock units
+ */
+static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
+{
+	return turbo ? (usec * 80) : (usec * 40);
+}
 
+/*
+ * Translate hw clock units to usec
+ */
+static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
+{
+	return turbo ? (clock / 80) : (clock / 40);
+}
+
+/*
+ * Read from a register
+ */
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->ah_iobase + reg);
 }
 
+/*
+ * Write to a register
+ */
 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 {
 	iowrite32(val, ah->ah_iobase + reg);
 }
 
+#if defined(_ATH5K_RESET) || defined(_ATH5K_PHY)
+/*
+ * Check if a register write has been completed
+ */
+static int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag,
+		u32 val, bool is_set)
+{
+	int i;
+	u32 data;
+
+	for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
+		data = ath5k_hw_reg_read(ah, reg);
+		if (is_set && (data & flag))
+			break;
+		else if ((data & flag) == val)
+			break;
+		udelay(15);
+	}
+
+	return (i <= 0) ? -EAGAIN : 0;
+}
+#endif
+
+static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
+{
+	u32 retval = 0, bit, i;
+
+	for (i = 0; i < bits; i++) {
+		bit = (val >> i) & 1;
+		retval = (retval << 1) | bit;
+	}
+
+	return retval;
+}
+
 #endif

drivers/net/wireless/ath5k/attach.c

@@ -0,0 +1,315 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* Attach/Detach Functions and helpers *
+\*************************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/**
+ * ath5k_hw_post - Power On Self Test helper function
+ *
+ * @ah: The &struct ath5k_hw
+ */
+static int ath5k_hw_post(struct ath5k_hw *ah)
+{
+
+	int i, c;
+	u16 cur_reg;
+	u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
+	u32 var_pattern;
+	u32 static_pattern[4] = {
+		0x55555555,	0xaaaaaaaa,
+		0x66666666,	0x99999999
+	};
+	u32 init_val;
+	u32 cur_val;
+
+	for (c = 0; c < 2; c++) {
+
+		cur_reg = regs[c];
+
+		/* Save previous value */
+		init_val = ath5k_hw_reg_read(ah, cur_reg);
+
+		for (i = 0; i < 256; i++) {
+			var_pattern = i << 16 | i;
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+			cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+			if (cur_val != var_pattern) {
+				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+				return -EAGAIN;
+			}
+
+			/* Found on ndiswrapper dumps */
+			var_pattern = 0x0039080f;
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+		}
+
+		for (i = 0; i < 4; i++) {
+			var_pattern = static_pattern[i];
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+			cur_val = ath5k_hw_reg_read(ah, cur_reg);
+
+			if (cur_val != var_pattern) {
+				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
+				return -EAGAIN;
+			}
+
+			/* Found on ndiswrapper dumps */
+			var_pattern = 0x003b080f;
+			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
+		}
+
+		/* Restore previous value */
+		ath5k_hw_reg_write(ah, init_val, cur_reg);
+
+	}
+
+	return 0;
+
+}
+
+/**
+ * ath5k_hw_attach - Check if hw is supported and init the needed structs
+ *
+ * @sc: The &struct ath5k_softc we got from the driver's attach function
+ * @mac_version: The mac version id (check out ath5k.h) based on pci id
+ *
+ * Check if the device is supported, perform a POST and initialize the needed
+ * structs. Returns -ENOMEM if we don't have memory for the needed structs,
+ * -ENODEV if the device is not supported or prints an error msg if something
+ * else went wrong.
+ */
+struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
+{
+	struct ath5k_hw *ah;
+	struct pci_dev *pdev = sc->pdev;
+	u8 mac[ETH_ALEN];
+	int ret;
+	u32 srev;
+
+	/*If we passed the test malloc a ath5k_hw struct*/
+	ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+	if (ah == NULL) {
+		ret = -ENOMEM;
+		ATH5K_ERR(sc, "out of memory\n");
+		goto err;
+	}
+
+	ah->ah_sc = sc;
+	ah->ah_iobase = sc->iobase;
+
+	/*
+	 * HW information
+	 */
+	ah->ah_op_mode = IEEE80211_IF_TYPE_STA;
+	ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
+	ah->ah_turbo = false;
+	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
+	ah->ah_imr = 0;
+	ah->ah_atim_window = 0;
+	ah->ah_aifs = AR5K_TUNE_AIFS;
+	ah->ah_cw_min = AR5K_TUNE_CWMIN;
+	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
+	ah->ah_software_retry = false;
+	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
+
+	/*
+	 * Set the mac revision based on the pci id
+	 */
+	ah->ah_version = mac_version;
+
+	/*Fill the ath5k_hw struct with the needed functions*/
+	ret = ath5k_hw_init_desc_functions(ah);
+	if (ret)
+		goto err_free;
+
+	/* Bring device out of sleep and reset it's units */
+	ret = ath5k_hw_nic_wakeup(ah, CHANNEL_B, true);
+	if (ret)
+		goto err_free;
+
+	/* Get MAC, PHY and RADIO revisions */
+	srev = ath5k_hw_reg_read(ah, AR5K_SREV);
+	ah->ah_mac_srev = srev;
+	ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
+	ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
+	ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
+			0xffffffff;
+	ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
+			CHANNEL_5GHZ);
+
+	if (ah->ah_version == AR5K_AR5210)
+		ah->ah_radio_2ghz_revision = 0;
+	else
+		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
+				CHANNEL_2GHZ);
+
+	/* Return on unsuported chips (unsupported eeprom etc) */
+	if ((srev >= AR5K_SREV_VER_AR5416) &&
+	(srev < AR5K_SREV_VER_AR2425)) {
+		ATH5K_ERR(sc, "Device not yet supported.\n");
+		ret = -ENODEV;
+		goto err_free;
+	} else if (srev == AR5K_SREV_VER_AR2425) {
+		ATH5K_WARN(sc, "Support for RF2425 is under development.\n");
+	}
+
+	/* Identify single chip solutions */
+	if (((srev <= AR5K_SREV_VER_AR5414) &&
+	(srev >= AR5K_SREV_VER_AR2413)) ||
+	(srev == AR5K_SREV_VER_AR2425)) {
+		ah->ah_single_chip = true;
+	} else {
+		ah->ah_single_chip = false;
+	}
+
+	/* Single chip radio */
+	if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
+		ah->ah_radio_2ghz_revision = 0;
+
+	/* Identify the radio chip*/
+	if (ah->ah_version == AR5K_AR5210) {
+		ah->ah_radio = AR5K_RF5110;
+	/*
+	 * Register returns 0x0/0x04 for radio revision
+	 * so ath5k_hw_radio_revision doesn't parse the value
+	 * correctly. For now we are based on mac's srev to
+	 * identify RF2425 radio.
+	 */
+	} else if (srev == AR5K_SREV_VER_AR2425) {
+		ah->ah_radio = AR5K_RF2425;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
+	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
+		ah->ah_radio = AR5K_RF5111;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
+	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
+		ah->ah_radio = AR5K_RF5112;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
+	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
+		ah->ah_radio = AR5K_RF2413;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
+		ah->ah_radio = AR5K_RF5413;
+		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
+		/* AR5424 */
+		if (srev >= AR5K_SREV_VER_AR5424) {
+			ah->ah_radio = AR5K_RF5413;
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
+		/* AR2424 */
+		} else {
+			ah->ah_radio = AR5K_RF2413; /* For testing */
+			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
+		}
+	}
+	ah->ah_phy = AR5K_PHY(0);
+
+	/*
+	 * Write PCI-E power save settings
+	 */
+	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
+		ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
+		ath5k_hw_reg_write(ah, 0x24924924, 0x4080);
+		ath5k_hw_reg_write(ah, 0x28000039, 0x4080);
+		ath5k_hw_reg_write(ah, 0x53160824, 0x4080);
+		ath5k_hw_reg_write(ah, 0xe5980579, 0x4080);
+		ath5k_hw_reg_write(ah, 0x001defff, 0x4080);
+		ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080);
+		ath5k_hw_reg_write(ah, 0xbe105554, 0x4080);
+		ath5k_hw_reg_write(ah, 0x000e3007, 0x4080);
+		ath5k_hw_reg_write(ah, 0x00000000, 0x4084);
+	}
+
+	/*
+	 * POST
+	 */
+	ret = ath5k_hw_post(ah);
+	if (ret)
+		goto err_free;
+
+	/* Write AR5K_PCICFG_UNK on 2112B and later chips */
+	if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
+	srev > AR5K_SREV_VER_AR2413) {
+		ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
+	}
+
+	/*
+	 * Get card capabilities, values, ...
+	 */
+	ret = ath5k_eeprom_init(ah);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to init EEPROM\n");
+		goto err_free;
+	}
+
+	/* Get misc capabilities */
+	ret = ath5k_hw_set_capabilities(ah);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
+			sc->pdev->device);
+		goto err_free;
+	}
+
+	/* Get MAC address */
+	ret = ath5k_eeprom_read_mac(ah, mac);
+	if (ret) {
+		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
+			sc->pdev->device);
+		goto err_free;
+	}
+
+	ath5k_hw_set_lladdr(ah, mac);
+	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
+	memset(ah->ah_bssid, 0xff, ETH_ALEN);
+	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+	ath5k_hw_set_opmode(ah);
+
+	ath5k_hw_set_rfgain_opt(ah);
+
+	return ah;
+err_free:
+	kfree(ah);
+err:
+	return ERR_PTR(ret);
+}
+
+/**
+ * ath5k_hw_detach - Free the ath5k_hw struct
+ *
+ * @ah: The &struct ath5k_hw
+ */
+void ath5k_hw_detach(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	__set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
+
+	if (ah->ah_rf_banks != NULL)
+		kfree(ah->ah_rf_banks);
+
+	/* assume interrupts are down */
+	kfree(ah);
+}

drivers/net/wireless/ath5k/base.c

@@ -485,6 +485,12 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
+
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC) |
+		BIT(NL80211_IFTYPE_MESH_POINT);
+
 	hw->extra_tx_headroom = 2;
 	hw->channel_change_time = 5000;
 	sc = hw->priv;
@@ -707,7 +713,7 @@ ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
 	 * return false w/o doing anything.  MAC's that do
 	 * support it will return true w/o doing anything.
 	 */
-	ret = ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
+	ret = ah->ah_setup_mrr_tx_desc(ah, NULL, 0, 0, 0, 0, 0, 0);
 	if (ret < 0)
 		goto err;
 	if (ret > 0)
@@ -1137,7 +1143,7 @@ ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	ds = bf->desc;
 	ds->ds_link = bf->daddr;	/* link to self */
 	ds->ds_data = bf->skbaddr;
-	ath5k_hw_setup_rx_desc(ah, ds,
+	ah->ah_setup_rx_desc(ah, ds,
 		skb_tailroom(skb),	/* buffer size */
 		0);
 
@@ -1188,12 +1194,12 @@ ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
 	list_add_tail(&bf->list, &txq->q);
 	sc->tx_stats[txq->qnum].len++;
 	if (txq->link == NULL) /* is this first packet? */
-		ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr);
+		ath5k_hw_set_txdp(ah, txq->qnum, bf->daddr);
 	else /* no, so only link it */
 		*txq->link = bf->daddr;
 
 	txq->link = &ds->ds_link;
-	ath5k_hw_tx_start(ah, txq->qnum);
+	ath5k_hw_start_tx_dma(ah, txq->qnum);
 	mmiowb();
 	spin_unlock_bh(&txq->lock);
 
@@ -1393,7 +1399,7 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
 		"beacon queueprops tqi_aifs:%d tqi_cw_min:%d tqi_cw_max:%d\n",
 		qi.tqi_aifs, qi.tqi_cw_min, qi.tqi_cw_max);
 
-	ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
+	ret = ath5k_hw_set_tx_queueprops(ah, sc->bhalq, &qi);
 	if (ret) {
 		ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
 			"hardware queue!\n", __func__);
@@ -1442,14 +1448,14 @@ ath5k_txq_cleanup(struct ath5k_softc *sc)
 		/* don't touch the hardware if marked invalid */
 		ath5k_hw_stop_tx_dma(ah, sc->bhalq);
 		ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
-			ath5k_hw_get_tx_buf(ah, sc->bhalq));
+			ath5k_hw_get_txdp(ah, sc->bhalq));
 		for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
 			if (sc->txqs[i].setup) {
 				ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
 				ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
 					"link %p\n",
 					sc->txqs[i].qnum,
-					ath5k_hw_get_tx_buf(ah,
+					ath5k_hw_get_txdp(ah,
 							sc->txqs[i].qnum),
 					sc->txqs[i].link);
 			}
@@ -1509,8 +1515,8 @@ ath5k_rx_start(struct ath5k_softc *sc)
 	bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
 	spin_unlock_bh(&sc->rxbuflock);
 
-	ath5k_hw_put_rx_buf(ah, bf->daddr);
-	ath5k_hw_start_rx(ah);		/* enable recv descriptors */
+	ath5k_hw_set_rxdp(ah, bf->daddr);
+	ath5k_hw_start_rx_dma(ah);	/* enable recv descriptors */
 	ath5k_mode_setup(sc);		/* set filters, etc. */
 	ath5k_hw_start_rx_pcu(ah);	/* re-enable PCU/DMA engine */
 
@@ -1527,7 +1533,7 @@ ath5k_rx_stop(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 
-	ath5k_hw_stop_pcu_recv(ah);	/* disable PCU */
+	ath5k_hw_stop_rx_pcu(ah);	/* disable PCU */
 	ath5k_hw_set_rx_filter(ah, 0);	/* clear recv filter */
 	ath5k_hw_stop_rx_dma(ah);	/* disable DMA engine */
 
@@ -1976,8 +1982,8 @@ ath5k_beacon_send(struct ath5k_softc *sc)
 		/* NB: hw still stops DMA, so proceed */
 	}
 
-	ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
-	ath5k_hw_tx_start(ah, sc->bhalq);
+	ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
+	ath5k_hw_start_tx_dma(ah, sc->bhalq);
 	ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "TXDP[%u] = %llx (%p)\n",
 		sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
 
@@ -2106,7 +2112,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
 
-	ath5k_hw_set_intr(ah, 0);
+	ath5k_hw_set_imr(ah, 0);
 	sc->bmisscount = 0;
 	sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
 
@@ -2132,7 +2138,7 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 	}
 	/* TODO else AP */
 
-	ath5k_hw_set_intr(ah, sc->imask);
+	ath5k_hw_set_imr(ah, sc->imask);
 }
 
 
@@ -2211,7 +2217,7 @@ ath5k_stop_locked(struct ath5k_softc *sc)
 
 	if (!test_bit(ATH_STAT_INVALID, sc->status)) {
 		ath5k_led_off(sc);
-		ath5k_hw_set_intr(ah, 0);
+		ath5k_hw_set_imr(ah, 0);
 		synchronize_irq(sc->pdev->irq);
 	}
 	ath5k_txq_cleanup(sc);
@@ -2604,7 +2610,7 @@ ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
 
 	if (stop) {
-		ath5k_hw_set_intr(ah, 0);
+		ath5k_hw_set_imr(ah, 0);
 		ath5k_txq_cleanup(sc);
 		ath5k_rx_stop(sc);
 	}

drivers/net/wireless/ath5k/caps.c

@@ -0,0 +1,193 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/**************\
+* Capabilities *
+\**************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Fill the capabilities struct
+ * TODO: Merge this with EEPROM code when we are done with it
+ */
+int ath5k_hw_set_capabilities(struct ath5k_hw *ah)
+{
+	u16 ee_header;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/* Capabilities stored in the EEPROM */
+	ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		/*
+		 * Set radio capabilities
+		 * (The AR5110 only supports the middle 5GHz band)
+		 */
+		ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
+		ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
+		ah->ah_capabilities.cap_range.range_2ghz_min = 0;
+		ah->ah_capabilities.cap_range.range_2ghz_max = 0;
+
+		/* Set supported modes */
+		__set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
+		__set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
+	} else {
+		/*
+		 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
+		 * XXX and from 2312 to 2732GHz. There are problems with the
+		 * XXX current ieee80211 implementation because the IEEE
+		 * XXX channel mapping does not support negative channel
+		 * XXX numbers (2312MHz is channel -19). Of course, this
+		 * XXX doesn't matter because these channels are out of range
+		 * XXX but some regulation domains like MKK (Japan) will
+		 * XXX support frequencies somewhere around 4.8GHz.
+		 */
+
+		/*
+		 * Set radio capabilities
+		 */
+
+		if (AR5K_EEPROM_HDR_11A(ee_header)) {
+			/* 4920 */
+			ah->ah_capabilities.cap_range.range_5ghz_min = 5005;
+			ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
+
+			/* Set supported modes */
+			__set_bit(AR5K_MODE_11A,
+					ah->ah_capabilities.cap_mode);
+			__set_bit(AR5K_MODE_11A_TURBO,
+					ah->ah_capabilities.cap_mode);
+			if (ah->ah_version == AR5K_AR5212)
+				__set_bit(AR5K_MODE_11G_TURBO,
+						ah->ah_capabilities.cap_mode);
+		}
+
+		/* Enable  802.11b if a 2GHz capable radio (2111/5112) is
+		 * connected */
+		if (AR5K_EEPROM_HDR_11B(ee_header) ||
+				AR5K_EEPROM_HDR_11G(ee_header)) {
+			/* 2312 */
+			ah->ah_capabilities.cap_range.range_2ghz_min = 2412;
+			ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
+
+			if (AR5K_EEPROM_HDR_11B(ee_header))
+				__set_bit(AR5K_MODE_11B,
+						ah->ah_capabilities.cap_mode);
+
+			if (AR5K_EEPROM_HDR_11G(ee_header))
+				__set_bit(AR5K_MODE_11G,
+						ah->ah_capabilities.cap_mode);
+		}
+	}
+
+	/* GPIO */
+	ah->ah_gpio_npins = AR5K_NUM_GPIO;
+
+	/* Set number of supported TX queues */
+	if (ah->ah_version == AR5K_AR5210)
+		ah->ah_capabilities.cap_queues.q_tx_num =
+			AR5K_NUM_TX_QUEUES_NOQCU;
+	else
+		ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
+
+	return 0;
+}
+
+/* Main function used by the driver part to check caps */
+int ath5k_hw_get_capability(struct ath5k_hw *ah,
+		enum ath5k_capability_type cap_type,
+		u32 capability, u32 *result)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	switch (cap_type) {
+	case AR5K_CAP_NUM_TXQUEUES:
+		if (result) {
+			if (ah->ah_version == AR5K_AR5210)
+				*result = AR5K_NUM_TX_QUEUES_NOQCU;
+			else
+				*result = AR5K_NUM_TX_QUEUES;
+			goto yes;
+		}
+	case AR5K_CAP_VEOL:
+		goto yes;
+	case AR5K_CAP_COMPRESSION:
+		if (ah->ah_version == AR5K_AR5212)
+			goto yes;
+		else
+			goto no;
+	case AR5K_CAP_BURST:
+		goto yes;
+	case AR5K_CAP_TPC:
+		goto yes;
+	case AR5K_CAP_BSSIDMASK:
+		if (ah->ah_version == AR5K_AR5212)
+			goto yes;
+		else
+			goto no;
+	case AR5K_CAP_XR:
+		if (ah->ah_version == AR5K_AR5212)
+			goto yes;
+		else
+			goto no;
+	default:
+		goto no;
+	}
+
+no:
+	return -EINVAL;
+yes:
+	return 0;
+}
+
+/*
+ * TODO: Following functions should be part of a new function
+ * set_capability
+ */
+
+int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
+		u16 assoc_id)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+		return 0;
+	}
+
+	return -EIO;
+}
+
+int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
+		return 0;
+	}
+
+	return -EIO;
+}

drivers/net/wireless/ath5k/debug.c

@@ -58,8 +58,8 @@
  * THE POSSIBILITY OF SUCH DAMAGES.
  */
 
-#include "debug.h"
 #include "base.h"
+#include "debug.h"
 
 static unsigned int ath5k_debug;
 module_param_named(debug, ath5k_debug, uint, 0);
@@ -525,7 +525,7 @@ ath5k_debug_printrxbuffs(struct ath5k_softc *sc, struct ath5k_hw *ah)
 		return;
 
 	printk(KERN_DEBUG "rx queue %x, link %p\n",
-		ath5k_hw_get_rx_buf(ah), sc->rxlink);
+		ath5k_hw_get_rxdp(ah), sc->rxlink);
 
 	spin_lock_bh(&sc->rxbuflock);
 	list_for_each_entry(bf, &sc->rxbuf, list) {

drivers/net/wireless/ath5k/desc.c

@@ -0,0 +1,667 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/******************************\
+ Hardware Descriptor Functions
+\******************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * TX Descriptors
+ */
+
+/*
+ * Initialize the 2-word tx control descriptor on 5210/5211
+ */
+static int
+ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+	unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
+	unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
+	unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
+	unsigned int rtscts_rate, unsigned int rtscts_duration)
+{
+	u32 frame_type;
+	struct ath5k_hw_2w_tx_ctl *tx_ctl;
+	unsigned int frame_len;
+
+	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+
+	/*
+	 * Validate input
+	 * - Zero retries don't make sense.
+	 * - A zero rate will put the HW into a mode where it continously sends
+	 *   noise on the channel, so it is important to avoid this.
+	 */
+	if (unlikely(tx_tries0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero retries\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	if (unlikely(tx_rate0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero rate\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	/* Clear descriptor */
+	memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
+
+	/* Setup control descriptor */
+
+	/* Verify and set frame length */
+
+	/* remove padding we might have added before */
+	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+	if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
+
+	/* Verify and set buffer length */
+
+	/* NB: beacon's BufLen must be a multiple of 4 bytes */
+	if (type == AR5K_PKT_TYPE_BEACON)
+		pkt_len = roundup(pkt_len, 4);
+
+	if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
+
+	/*
+	 * Verify and set header length
+	 * XXX: I only found that on 5210 code, does it work on 5211 ?
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
+			return -EINVAL;
+		tx_ctl->tx_control_0 |=
+			AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
+	}
+
+	/*Diferences between 5210-5211*/
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (type) {
+		case AR5K_PKT_TYPE_BEACON:
+		case AR5K_PKT_TYPE_PROBE_RESP:
+			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
+		case AR5K_PKT_TYPE_PIFS:
+			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
+		default:
+			frame_type = type /*<< 2 ?*/;
+		}
+
+		tx_ctl->tx_control_0 |=
+		AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
+		AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+	} else {
+		tx_ctl->tx_control_0 |=
+			AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
+			AR5K_REG_SM(antenna_mode,
+				AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
+		tx_ctl->tx_control_1 |=
+			AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
+	}
+#define _TX_FLAGS(_c, _flag)					\
+	if (flags & AR5K_TXDESC_##_flag) {			\
+		tx_ctl->tx_control_##_c |=			\
+			AR5K_2W_TX_DESC_CTL##_c##_##_flag;	\
+	}
+
+	_TX_FLAGS(0, CLRDMASK);
+	_TX_FLAGS(0, VEOL);
+	_TX_FLAGS(0, INTREQ);
+	_TX_FLAGS(0, RTSENA);
+	_TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+	/*
+	 * WEP crap
+	 */
+	if (key_index != AR5K_TXKEYIX_INVALID) {
+		tx_ctl->tx_control_0 |=
+			AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+		tx_ctl->tx_control_1 |=
+			AR5K_REG_SM(key_index,
+			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+	}
+
+	/*
+	 * RTS/CTS Duration [5210 ?]
+	 */
+	if ((ah->ah_version == AR5K_AR5210) &&
+			(flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
+		tx_ctl->tx_control_1 |= rtscts_duration &
+				AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
+
+	return 0;
+}
+
+/*
+ * Initialize the 4-word tx control descriptor on 5212
+ */
+static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
+	struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
+	enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
+	unsigned int tx_tries0, unsigned int key_index,
+	unsigned int antenna_mode, unsigned int flags,
+	unsigned int rtscts_rate,
+	unsigned int rtscts_duration)
+{
+	struct ath5k_hw_4w_tx_ctl *tx_ctl;
+	unsigned int frame_len;
+
+	ATH5K_TRACE(ah->ah_sc);
+	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+	/*
+	 * Validate input
+	 * - Zero retries don't make sense.
+	 * - A zero rate will put the HW into a mode where it continously sends
+	 *   noise on the channel, so it is important to avoid this.
+	 */
+	if (unlikely(tx_tries0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero retries\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+	if (unlikely(tx_rate0 == 0)) {
+		ATH5K_ERR(ah->ah_sc, "zero rate\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	/* Clear descriptor */
+	memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
+
+	/* Setup control descriptor */
+
+	/* Verify and set frame length */
+
+	/* remove padding we might have added before */
+	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
+
+	if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
+
+	/* Verify and set buffer length */
+
+	/* NB: beacon's BufLen must be a multiple of 4 bytes */
+	if (type == AR5K_PKT_TYPE_BEACON)
+		pkt_len = roundup(pkt_len, 4);
+
+	if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
+		return -EINVAL;
+
+	tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
+
+	tx_ctl->tx_control_0 |=
+		AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
+		AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
+	tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
+					AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
+	tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
+					AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
+	tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+
+#define _TX_FLAGS(_c, _flag)					\
+	if (flags & AR5K_TXDESC_##_flag) {			\
+		tx_ctl->tx_control_##_c |=			\
+			AR5K_4W_TX_DESC_CTL##_c##_##_flag;	\
+	}
+
+	_TX_FLAGS(0, CLRDMASK);
+	_TX_FLAGS(0, VEOL);
+	_TX_FLAGS(0, INTREQ);
+	_TX_FLAGS(0, RTSENA);
+	_TX_FLAGS(0, CTSENA);
+	_TX_FLAGS(1, NOACK);
+
+#undef _TX_FLAGS
+
+	/*
+	 * WEP crap
+	 */
+	if (key_index != AR5K_TXKEYIX_INVALID) {
+		tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
+		tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
+				AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
+	}
+
+	/*
+	 * RTS/CTS
+	 */
+	if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
+		if ((flags & AR5K_TXDESC_RTSENA) &&
+				(flags & AR5K_TXDESC_CTSENA))
+			return -EINVAL;
+		tx_ctl->tx_control_2 |= rtscts_duration &
+				AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
+		tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
+				AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
+	}
+
+	return 0;
+}
+
+/*
+ * Initialize a 4-word multi rate retry tx control descriptor on 5212
+ */
+static int
+ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2,
+	u_int tx_tries2, unsigned int tx_rate3, u_int tx_tries3)
+{
+	struct ath5k_hw_4w_tx_ctl *tx_ctl;
+
+	/*
+	 * Rates can be 0 as long as the retry count is 0 too.
+	 * A zero rate and nonzero retry count will put the HW into a mode where
+	 * it continously sends noise on the channel, so it is important to
+	 * avoid this.
+	 */
+	if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
+		     (tx_rate2 == 0 && tx_tries2 != 0) ||
+		     (tx_rate3 == 0 && tx_tries3 != 0))) {
+		ATH5K_ERR(ah->ah_sc, "zero rate\n");
+		WARN_ON(1);
+		return -EINVAL;
+	}
+
+	if (ah->ah_version == AR5K_AR5212) {
+		tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+
+#define _XTX_TRIES(_n)							\
+	if (tx_tries##_n) {						\
+		tx_ctl->tx_control_2 |=					\
+		    AR5K_REG_SM(tx_tries##_n,				\
+		    AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n);		\
+		tx_ctl->tx_control_3 |=					\
+		    AR5K_REG_SM(tx_rate##_n,				\
+		    AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n);		\
+	}
+
+		_XTX_TRIES(1);
+		_XTX_TRIES(2);
+		_XTX_TRIES(3);
+
+#undef _XTX_TRIES
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Proccess the tx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+	struct ath5k_hw_2w_tx_ctl *tx_ctl;
+	struct ath5k_hw_tx_status *tx_status;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
+	tx_status = &desc->ud.ds_tx5210.tx_stat;
+
+	/* No frame has been send or error */
+	if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
+		return -EINPROGRESS;
+
+	/*
+	 * Get descriptor status
+	 */
+	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+	/*TODO: ts->ts_virtcol + test*/
+	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_SEQ_NUM);
+	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+	ts->ts_antenna = 1;
+	ts->ts_status = 0;
+	ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0,
+		AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
+
+	if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+		if (tx_status->tx_status_0 &
+				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+			ts->ts_status |= AR5K_TXERR_XRETRY;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+			ts->ts_status |= AR5K_TXERR_FIFO;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+			ts->ts_status |= AR5K_TXERR_FILT;
+	}
+
+	return 0;
+}
+
+/*
+ * Proccess a tx status descriptor on 5212
+ */
+static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
+{
+	struct ath5k_hw_4w_tx_ctl *tx_ctl;
+	struct ath5k_hw_tx_status *tx_status;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
+	tx_status = &desc->ud.ds_tx5212.tx_stat;
+
+	/* No frame has been send or error */
+	if (unlikely(!(tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE)))
+		return -EINPROGRESS;
+
+	/*
+	 * Get descriptor status
+	 */
+	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
+	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
+	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
+		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
+	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_SEQ_NUM);
+	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
+		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
+	ts->ts_antenna = (tx_status->tx_status_1 &
+		AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
+	ts->ts_status = 0;
+
+	switch (AR5K_REG_MS(tx_status->tx_status_1,
+			AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) {
+	case 0:
+		ts->ts_rate = tx_ctl->tx_control_3 &
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
+		break;
+	case 1:
+		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
+		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
+			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
+		break;
+	case 2:
+		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
+		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
+			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
+		break;
+	case 3:
+		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
+			AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
+		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
+			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3);
+		break;
+	}
+
+	/* TX error */
+	if (!(tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK)) {
+		if (tx_status->tx_status_0 &
+				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
+			ts->ts_status |= AR5K_TXERR_XRETRY;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
+			ts->ts_status |= AR5K_TXERR_FIFO;
+
+		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
+			ts->ts_status |= AR5K_TXERR_FILT;
+	}
+
+	return 0;
+}
+
+/*
+ * RX Descriptors
+ */
+
+/*
+ * Initialize an rx control descriptor
+ */
+static int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
+			u32 size, unsigned int flags)
+{
+	struct ath5k_hw_rx_ctl *rx_ctl;
+
+	ATH5K_TRACE(ah->ah_sc);
+	rx_ctl = &desc->ud.ds_rx.rx_ctl;
+
+	/*
+	 * Clear the descriptor
+	 * If we don't clean the status descriptor,
+	 * while scanning we get too many results,
+	 * most of them virtual, after some secs
+	 * of scanning system hangs. M.F.
+	*/
+	memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
+
+	/* Setup descriptor */
+	rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
+	if (unlikely(rx_ctl->rx_control_1 != size))
+		return -EINVAL;
+
+	if (flags & AR5K_RXDESC_INTREQ)
+		rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
+
+	return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5210/5211
+ */
+static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+	struct ath5k_hw_rx_status *rx_status;
+
+	rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+	/* No frame received / not ready */
+	if (unlikely(!(rx_status->rx_status_1 &
+	AR5K_5210_RX_DESC_STATUS1_DONE)))
+		return -EINPROGRESS;
+
+	/*
+	 * Frame receive status
+	 */
+	rs->rs_datalen = rx_status->rx_status_0 &
+		AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
+	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
+	rs->rs_antenna = rx_status->rx_status_0 &
+		AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+	rs->rs_more = rx_status->rx_status_0 &
+		AR5K_5210_RX_DESC_STATUS0_MORE;
+	/* TODO: this timestamp is 13 bit, later on we assume 15 bit */
+	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+		AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+	rs->rs_status = 0;
+	rs->rs_phyerr = 0;
+
+	/*
+	 * Key table status
+	 */
+	if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
+		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+			AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
+	else
+		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+	/*
+	 * Receive/descriptor errors
+	 */
+	if (!(rx_status->rx_status_1 &
+	AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_CRC;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
+			rs->rs_status |= AR5K_RXERR_FIFO;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
+			rs->rs_status |= AR5K_RXERR_PHY;
+			rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
+				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
+		}
+
+		if (rx_status->rx_status_1 &
+				AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_DECRYPT;
+	}
+
+	return 0;
+}
+
+/*
+ * Proccess the rx status descriptor on 5212
+ */
+static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
+		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
+{
+	struct ath5k_hw_rx_status *rx_status;
+	struct ath5k_hw_rx_error *rx_err;
+
+	ATH5K_TRACE(ah->ah_sc);
+	rx_status = &desc->ud.ds_rx.u.rx_stat;
+
+	/* Overlay on error */
+	rx_err = &desc->ud.ds_rx.u.rx_err;
+
+	/* No frame received / not ready */
+	if (unlikely(!(rx_status->rx_status_1 &
+	AR5K_5212_RX_DESC_STATUS1_DONE)))
+		return -EINPROGRESS;
+
+	/*
+	 * Frame receive status
+	 */
+	rs->rs_datalen = rx_status->rx_status_0 &
+		AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
+	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
+	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
+		AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
+	rs->rs_antenna = rx_status->rx_status_0 &
+		AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
+	rs->rs_more = rx_status->rx_status_0 &
+		AR5K_5212_RX_DESC_STATUS0_MORE;
+	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
+		AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
+	rs->rs_status = 0;
+	rs->rs_phyerr = 0;
+
+	/*
+	 * Key table status
+	 */
+	if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
+		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
+				AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
+	else
+		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
+
+	/*
+	 * Receive/descriptor errors
+	 */
+	if (!(rx_status->rx_status_1 &
+	AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK)) {
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_CRC;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
+			rs->rs_status |= AR5K_RXERR_PHY;
+			rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
+					   AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
+		}
+
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
+			rs->rs_status |= AR5K_RXERR_DECRYPT;
+
+		if (rx_status->rx_status_1 &
+				AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
+			rs->rs_status |= AR5K_RXERR_MIC;
+	}
+
+	return 0;
+}
+
+/*
+ * Init function pointers inside ath5k_hw struct
+ */
+int ath5k_hw_init_desc_functions(struct ath5k_hw *ah)
+{
+
+	if (ah->ah_version != AR5K_AR5210 &&
+		ah->ah_version != AR5K_AR5211 &&
+		ah->ah_version != AR5K_AR5212)
+			return -ENOTSUPP;
+
+	/* XXX: What is this magic value and where is it used ? */
+	if (ah->ah_version == AR5K_AR5212)
+		ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
+	else if (ah->ah_version == AR5K_AR5211)
+		ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
+
+	if (ah->ah_version == AR5K_AR5212) {
+		ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+		ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
+		ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc;
+		ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
+	} else {
+		ah->ah_setup_rx_desc = ath5k_hw_setup_rx_desc;
+		ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
+		ah->ah_setup_mrr_tx_desc = ath5k_hw_setup_mrr_tx_desc;
+		ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
+	}
+
+	if (ah->ah_version == AR5K_AR5212)
+		ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
+	else if (ah->ah_version <= AR5K_AR5211)
+		ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
+
+	return 0;
+}
+

drivers/net/wireless/ath5k/hw.h → drivers/net/wireless/ath5k/desc.h

@@ -1,8 +1,6 @@
 /*
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Matthew W. S. Bell  <mentor@madwifi.org>
- * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -15,159 +13,9 @@
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
  */
 
-#include <linux/delay.h>
-
-/*
- * Gain settings
- */
-
-enum ath5k_rfgain {
-	AR5K_RFGAIN_INACTIVE = 0,
-	AR5K_RFGAIN_READ_REQUESTED,
-	AR5K_RFGAIN_NEED_CHANGE,
-};
-
-#define AR5K_GAIN_CRN_FIX_BITS_5111		4
-#define AR5K_GAIN_CRN_FIX_BITS_5112		7
-#define AR5K_GAIN_CRN_MAX_FIX_BITS		AR5K_GAIN_CRN_FIX_BITS_5112
-#define AR5K_GAIN_DYN_ADJUST_HI_MARGIN		15
-#define AR5K_GAIN_DYN_ADJUST_LO_MARGIN		20
-#define AR5K_GAIN_CCK_PROBE_CORR		5
-#define AR5K_GAIN_CCK_OFDM_GAIN_DELTA		15
-#define AR5K_GAIN_STEP_COUNT			10
-#define AR5K_GAIN_PARAM_TX_CLIP			0
-#define AR5K_GAIN_PARAM_PD_90			1
-#define AR5K_GAIN_PARAM_PD_84			2
-#define AR5K_GAIN_PARAM_GAIN_SEL		3
-#define AR5K_GAIN_PARAM_MIX_ORN			0
-#define AR5K_GAIN_PARAM_PD_138			1
-#define AR5K_GAIN_PARAM_PD_137			2
-#define AR5K_GAIN_PARAM_PD_136			3
-#define AR5K_GAIN_PARAM_PD_132			4
-#define AR5K_GAIN_PARAM_PD_131			5
-#define AR5K_GAIN_PARAM_PD_130			6
-#define AR5K_GAIN_CHECK_ADJUST(_g) 		\
-	((_g)->g_current <= (_g)->g_low || (_g)->g_current >= (_g)->g_high)
-
-struct ath5k_gain_opt_step {
-	s16				gos_param[AR5K_GAIN_CRN_MAX_FIX_BITS];
-	s32				gos_gain;
-};
-
-struct ath5k_gain {
-	u32			g_step_idx;
-	u32			g_current;
-	u32			g_target;
-	u32			g_low;
-	u32			g_high;
-	u32			g_f_corr;
-	u32			g_active;
-	const struct ath5k_gain_opt_step	*g_step;
-};
-
-
-/*
- * HW SPECIFIC STRUCTS
- */
-
-/* Some EEPROM defines */
-#define AR5K_EEPROM_EEP_SCALE		100
-#define AR5K_EEPROM_EEP_DELTA		10
-#define AR5K_EEPROM_N_MODES		3
-#define AR5K_EEPROM_N_5GHZ_CHAN		10
-#define AR5K_EEPROM_N_2GHZ_CHAN		3
-#define AR5K_EEPROM_MAX_CHAN		10
-#define AR5K_EEPROM_N_PCDAC		11
-#define AR5K_EEPROM_N_TEST_FREQ		8
-#define AR5K_EEPROM_N_EDGES		8
-#define AR5K_EEPROM_N_INTERCEPTS	11
-#define AR5K_EEPROM_FREQ_M(_v)		AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
-#define AR5K_EEPROM_PCDAC_M		0x3f
-#define AR5K_EEPROM_PCDAC_START		1
-#define AR5K_EEPROM_PCDAC_STOP		63
-#define AR5K_EEPROM_PCDAC_STEP		1
-#define AR5K_EEPROM_NON_EDGE_M		0x40
-#define AR5K_EEPROM_CHANNEL_POWER	8
-#define AR5K_EEPROM_N_OBDB		4
-#define AR5K_EEPROM_OBDB_DIS		0xffff
-#define AR5K_EEPROM_CHANNEL_DIS		0xff
-#define AR5K_EEPROM_SCALE_OC_DELTA(_x)	(((_x) * 2) / 10)
-#define AR5K_EEPROM_N_CTLS(_v)		AR5K_EEPROM_OFF(_v, 16, 32)
-#define AR5K_EEPROM_MAX_CTLS		32
-#define AR5K_EEPROM_N_XPD_PER_CHANNEL	4
-#define AR5K_EEPROM_N_XPD0_POINTS	4
-#define AR5K_EEPROM_N_XPD3_POINTS	3
-#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ	35
-#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ	55
-#define AR5K_EEPROM_POWER_M		0x3f
-#define AR5K_EEPROM_POWER_MIN		0
-#define AR5K_EEPROM_POWER_MAX		3150
-#define AR5K_EEPROM_POWER_STEP		50
-#define AR5K_EEPROM_POWER_TABLE_SIZE	64
-#define AR5K_EEPROM_N_POWER_LOC_11B	4
-#define AR5K_EEPROM_N_POWER_LOC_11G	6
-#define AR5K_EEPROM_I_GAIN		10
-#define AR5K_EEPROM_CCK_OFDM_DELTA	15
-#define AR5K_EEPROM_N_IQ_CAL		2
-
-/* Struct to hold EEPROM calibration data */
-struct ath5k_eeprom_info {
-	u16	ee_magic;
-	u16	ee_protect;
-	u16	ee_regdomain;
-	u16	ee_version;
-	u16	ee_header;
-	u16	ee_ant_gain;
-	u16	ee_misc0;
-	u16	ee_misc1;
-	u16	ee_cck_ofdm_gain_delta;
-	u16	ee_cck_ofdm_power_delta;
-	u16	ee_scaled_cck_delta;
-
-	/* Used for tx thermal adjustment (eeprom_init, rfregs) */
-	u16	ee_tx_clip;
-	u16	ee_pwd_84;
-	u16	ee_pwd_90;
-	u16	ee_gain_select;
-
-	/* RF Calibration settings (reset, rfregs) */
-	u16	ee_i_cal[AR5K_EEPROM_N_MODES];
-	u16	ee_q_cal[AR5K_EEPROM_N_MODES];
-	u16	ee_fixed_bias[AR5K_EEPROM_N_MODES];
-	u16	ee_turbo_max_power[AR5K_EEPROM_N_MODES];
-	u16	ee_xr_power[AR5K_EEPROM_N_MODES];
-	u16	ee_switch_settling[AR5K_EEPROM_N_MODES];
-	u16	ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
-	u16	ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
-	u16	ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
-	u16	ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
-	u16	ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
-	u16	ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
-	u16	ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
-	u16	ee_thr_62[AR5K_EEPROM_N_MODES];
-	u16	ee_xlna_gain[AR5K_EEPROM_N_MODES];
-	u16	ee_xpd[AR5K_EEPROM_N_MODES];
-	u16	ee_x_gain[AR5K_EEPROM_N_MODES];
-	u16	ee_i_gain[AR5K_EEPROM_N_MODES];
-	u16	ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
-
-	/* Unused */
-	u16	ee_false_detect[AR5K_EEPROM_N_MODES];
-	u16	ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
-	u16	ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
-
-	/* Conformance test limits (Unused) */
-	u16	ee_ctls;
-	u16	ee_ctl[AR5K_EEPROM_MAX_CTLS];
-
-	/* Noise Floor Calibration settings */
-	s16	ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
-	s8	ee_adc_desired_size[AR5K_EEPROM_N_MODES];
-	s8	ee_pga_desired_size[AR5K_EEPROM_N_MODES];
-};
-
 /*
  * Internal RX/TX descriptor structures
  * (rX: reserved fields possibily used by future versions of the ar5k chipset)
@@ -178,14 +26,15 @@ struct ath5k_eeprom_info {
  */
 struct ath5k_hw_rx_ctl {
 	u32	rx_control_0; /* RX control word 0 */
+	u32	rx_control_1; /* RX control word 1 */
+} __packed;
 
+/* RX control word 0 field/sflags */
 #define AR5K_DESC_RX_CTL0			0x00000000
 
-	u32	rx_control_1; /* RX control word 1 */
-
+/* RX control word 1 fields/flags */
 #define AR5K_DESC_RX_CTL1_BUF_LEN		0x00000fff
 #define AR5K_DESC_RX_CTL1_INTREQ		0x00002000
-} __packed;
 
 /*
  * common hardware RX status descriptor
@@ -197,6 +46,7 @@ struct ath5k_hw_rx_status {
 } __packed;
 
 /* 5210/5211 */
+/* RX status word 0 fields/flags */
 #define AR5K_5210_RX_DESC_STATUS0_DATA_LEN		0x00000fff
 #define AR5K_5210_RX_DESC_STATUS0_MORE			0x00001000
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE		0x00078000
@@ -205,6 +55,8 @@ struct ath5k_hw_rx_status {
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL_S	19
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA	0x38000000
 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA_S	27
+
+/* RX status word 1 fields/flags */
 #define AR5K_5210_RX_DESC_STATUS1_DONE			0x00000001
 #define AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK	0x00000002
 #define AR5K_5210_RX_DESC_STATUS1_CRC_ERROR		0x00000004
@@ -220,6 +72,7 @@ struct ath5k_hw_rx_status {
 #define AR5K_5210_RX_DESC_STATUS1_KEY_CACHE_MISS	0x10000000
 
 /* 5212 */
+/* RX status word 0 fields/flags */
 #define AR5K_5212_RX_DESC_STATUS0_DATA_LEN		0x00000fff
 #define AR5K_5212_RX_DESC_STATUS0_MORE			0x00001000
 #define AR5K_5212_RX_DESC_STATUS0_DECOMP_CRC_ERROR	0x00002000
@@ -229,6 +82,8 @@ struct ath5k_hw_rx_status {
 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL_S	20
 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA	0xf0000000
 #define AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA_S	28
+
+/* RX status word 1 fields/flags */
 #define AR5K_5212_RX_DESC_STATUS1_DONE			0x00000001
 #define AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK	0x00000002
 #define AR5K_5212_RX_DESC_STATUS1_CRC_ERROR		0x00000004
@@ -246,16 +101,18 @@ struct ath5k_hw_rx_status {
  * common hardware RX error descriptor
  */
 struct ath5k_hw_rx_error {
-	u32	rx_error_0; /* RX error word 0 */
+	u32	rx_error_0; /* RX status word 0 */
+	u32	rx_error_1; /* RX status word 1 */
+} __packed;
 
+/* RX error word 0 fields/flags */
 #define AR5K_RX_DESC_ERROR0			0x00000000
 
-	u32	rx_error_1; /* RX error word 1 */
-
+/* RX error word 1 fields/flags */
 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE	0x0000ff00
 #define AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE_S	8
-} __packed;
 
+/* PHY Error codes */
 #define AR5K_DESC_RX_PHY_ERROR_NONE		0x00
 #define AR5K_DESC_RX_PHY_ERROR_TIMING		0x20
 #define AR5K_DESC_RX_PHY_ERROR_PARITY		0x40
@@ -270,7 +127,10 @@ struct ath5k_hw_rx_error {
  */
 struct ath5k_hw_2w_tx_ctl {
 	u32	tx_control_0; /* TX control word 0 */
+	u32	tx_control_1; /* TX control word 1 */
+} __packed;
 
+/* TX control word 0 fields/flags */
 #define AR5K_2W_TX_DESC_CTL0_FRAME_LEN		0x00000fff
 #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN		0x0003f000 /*[5210 ?]*/
 #define AR5K_2W_TX_DESC_CTL0_HEADER_LEN_S	12
@@ -284,29 +144,34 @@ struct ath5k_hw_2w_tx_ctl {
 #define AR5K_2W_TX_DESC_CTL0_FRAME_TYPE_S	26
 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210	0x02000000
 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211	0x1e000000
-#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT	(ah->ah_version == AR5K_AR5210 ? \
-						AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 : \
-						AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
+#define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT			\
+		(ah->ah_version == AR5K_AR5210 ?		\
+		AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5210 :	\
+		AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_5211)
+
 #define AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT_S	25
 #define AR5K_2W_TX_DESC_CTL0_INTREQ		0x20000000
 #define AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID	0x40000000
 
-	u32	tx_control_1; /* TX control word 1 */
-
+/* TX control word 1 fields/flags */
 #define AR5K_2W_TX_DESC_CTL1_BUF_LEN		0x00000fff
 #define AR5K_2W_TX_DESC_CTL1_MORE		0x00001000
 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210	0x0007e000
 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211	0x000fe000
-#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX	(ah->ah_version == AR5K_AR5210 ? \
-						AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 : \
-						AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
+#define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX				\
+			(ah->ah_version == AR5K_AR5210 ?		\
+			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5210 :	\
+			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_5211)
+
 #define AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX_S	13
 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE		0x00700000 /*[5211]*/
 #define AR5K_2W_TX_DESC_CTL1_FRAME_TYPE_S	20
 #define AR5K_2W_TX_DESC_CTL1_NOACK		0x00800000 /*[5211]*/
 #define AR5K_2W_TX_DESC_CTL1_RTS_DURATION	0xfff80000 /*[5210 ?]*/
-} __packed;
 
+/* Frame types */
 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_NORMAL   0x00
 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_ATIM     0x04
 #define AR5K_AR5210_TX_DESC_FRAME_TYPE_PSPOLL   0x08
@@ -378,7 +243,10 @@ struct ath5k_hw_4w_tx_ctl {
  */
 struct ath5k_hw_tx_status {
 	u32	tx_status_0; /* TX status word 0 */
+	u32	tx_status_1; /* TX status word 1 */
+} __packed;
 
+/* TX status word 0 fields/flags */
 #define AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK	0x00000001
 #define AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES	0x00000002
 #define AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN	0x00000004
@@ -400,8 +268,7 @@ struct ath5k_hw_tx_status {
 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP	0xffff0000
 #define AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP_S	16
 
-	u32	tx_status_1; /* TX status word 1 */
-
+/* TX status word 1 fields/flags */
 #define AR5K_DESC_TX_STATUS1_DONE		0x00000001
 #define AR5K_DESC_TX_STATUS1_SEQ_NUM		0x00001ffe
 #define AR5K_DESC_TX_STATUS1_SEQ_NUM_S		1
@@ -411,8 +278,6 @@ struct ath5k_hw_tx_status {
 #define AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX_S	21
 #define AR5K_DESC_TX_STATUS1_COMP_SUCCESS	0x00800000
 #define AR5K_DESC_TX_STATUS1_XMIT_ANTENNA	0x01000000
-} __packed;
-
 
 /*
  * 5210/5211 hardware TX descriptor
@@ -441,176 +306,27 @@ struct ath5k_hw_all_rx_desc {
 	} u;
 } __packed;
 
-
 /*
- * AR5K REGISTER ACCESS
+ * Atheros hardware descriptor
+ * This is read and written to by the hardware
  */
+struct ath5k_desc {
+	u32	ds_link;	/* physical address of the next descriptor */
+	u32	ds_data;	/* physical address of data buffer (skb) */
 
-/*Swap RX/TX Descriptor for big endian archs*/
-#if defined(__BIG_ENDIAN)
-#define AR5K_INIT_CFG	(		\
-	AR5K_CFG_SWTD | AR5K_CFG_SWRD	\
-)
-#else
-#define AR5K_INIT_CFG	0x00000000
-#endif
-
-/*#define AR5K_REG_READ(_reg)	ath5k_hw_reg_read(ah, _reg)
-
-#define AR5K_REG_WRITE(_reg, _val)	ath5k_hw_reg_write(ah, _val, _reg)*/
-
-#define AR5K_REG_SM(_val, _flags)					\
-	(((_val) << _flags##_S) & (_flags))
-
-#define AR5K_REG_MS(_val, _flags)					\
-	(((_val) & (_flags)) >> _flags##_S)
-
-/* Some registers can hold multiple values of interest. For this
- * reason when we want to write to these registers we must first
- * retrieve the values which we do not want to clear (lets call this
- * old_data) and then set the register with this and our new_value:
- * ( old_data | new_value) */
-#define AR5K_REG_WRITE_BITS(ah, _reg, _flags, _val)			\
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) & ~(_flags)) | \
-	    (((_val) << _flags##_S) & (_flags)), _reg)
-
-#define AR5K_REG_MASKED_BITS(ah, _reg, _flags, _mask)			\
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, _reg) &		\
-			(_mask)) | (_flags), _reg)
-
-#define AR5K_REG_ENABLE_BITS(ah, _reg, _flags)				\
-	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) | (_flags), _reg)
-
-#define AR5K_REG_DISABLE_BITS(ah, _reg, _flags)			\
-	ath5k_hw_reg_write(ah, ath5k_hw_reg_read(ah, _reg) & ~(_flags), _reg)
-
-#define AR5K_PHY_WRITE(ah, _reg, _val)					\
-	ath5k_hw_reg_write(ah, _val, (ah)->ah_phy + ((_reg) << 2))
-
-#define AR5K_PHY_READ(ah, _reg)					\
-	ath5k_hw_reg_read(ah, (ah)->ah_phy + ((_reg) << 2))
-
-#define AR5K_REG_WAIT(_i) do {						\
-	if (_i % 64)							\
-		udelay(1);						\
-} while (0)
-
-#define AR5K_EEPROM_READ(_o, _v) do {					\
-	if ((ret = ath5k_hw_eeprom_read(ah, (_o), &(_v))) != 0)	\
-		return (ret);						\
-} while (0)
-
-#define AR5K_EEPROM_READ_HDR(_o, _v)					\
-	AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);	\
-
-/* Read status of selected queue */
-#define AR5K_REG_READ_Q(ah, _reg, _queue)				\
-	(ath5k_hw_reg_read(ah, _reg) & (1 << _queue))			\
-
-#define AR5K_REG_WRITE_Q(ah, _reg, _queue)				\
-	ath5k_hw_reg_write(ah, (1 << _queue), _reg)
-
-#define AR5K_Q_ENABLE_BITS(_reg, _queue) do {				\
-	_reg |= 1 << _queue;						\
-} while (0)
-
-#define AR5K_Q_DISABLE_BITS(_reg, _queue) do {				\
-	_reg &= ~(1 << _queue);						\
-} while (0)
-
-#define AR5K_LOW_ID(_a)(				\
-(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24	\
-)
-
-#define AR5K_HIGH_ID(_a)	((_a)[4] | (_a)[5] << 8)
-
-/*
- * Initial register values
- */
-
-/*
- * Common initial register values
- */
-#define AR5K_INIT_MODE				CHANNEL_B
-
-#define AR5K_INIT_TX_LATENCY			502
-#define AR5K_INIT_USEC				39
-#define AR5K_INIT_USEC_TURBO			79
-#define AR5K_INIT_USEC_32			31
-#define AR5K_INIT_CARR_SENSE_EN			1
-#define AR5K_INIT_PROG_IFS			920
-#define AR5K_INIT_PROG_IFS_TURBO		960
-#define AR5K_INIT_EIFS				3440
-#define AR5K_INIT_EIFS_TURBO			6880
-#define AR5K_INIT_SLOT_TIME			396
-#define AR5K_INIT_SLOT_TIME_TURBO		480
-#define AR5K_INIT_ACK_CTS_TIMEOUT		1024
-#define AR5K_INIT_ACK_CTS_TIMEOUT_TURBO		0x08000800
-#define AR5K_INIT_SIFS				560
-#define AR5K_INIT_SIFS_TURBO			480
-#define AR5K_INIT_SH_RETRY			10
-#define AR5K_INIT_LG_RETRY			AR5K_INIT_SH_RETRY
-#define AR5K_INIT_SSH_RETRY			32
-#define AR5K_INIT_SLG_RETRY			AR5K_INIT_SSH_RETRY
-#define AR5K_INIT_TX_RETRY			10
-#define AR5K_INIT_TOPS				8
-#define AR5K_INIT_RXNOFRM			8
-#define AR5K_INIT_RPGTO				0
-#define AR5K_INIT_TXNOFRM			0
-#define AR5K_INIT_BEACON_PERIOD			65535
-#define AR5K_INIT_TIM_OFFSET			0
-#define AR5K_INIT_BEACON_EN			0
-#define AR5K_INIT_RESET_TSF			0
-
-#define AR5K_INIT_TRANSMIT_LATENCY		(			\
-	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
-	(AR5K_INIT_USEC)						\
-)
-#define AR5K_INIT_TRANSMIT_LATENCY_TURBO	(			\
-	(AR5K_INIT_TX_LATENCY << 14) | (AR5K_INIT_USEC_32 << 7) |	\
-	(AR5K_INIT_USEC_TURBO)						\
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL		(			\
-	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS << 12) |	\
-	(AR5K_INIT_PROG_IFS)						\
-)
-#define AR5K_INIT_PROTO_TIME_CNTRL_TURBO	(			\
-	(AR5K_INIT_CARR_SENSE_EN << 26) | (AR5K_INIT_EIFS_TURBO << 12) | \
-	(AR5K_INIT_PROG_IFS_TURBO)					\
-)
-#define AR5K_INIT_BEACON_CONTROL		(			\
-	(AR5K_INIT_RESET_TSF << 24) | (AR5K_INIT_BEACON_EN << 23) |	\
-	(AR5K_INIT_TIM_OFFSET << 16) | (AR5K_INIT_BEACON_PERIOD)	\
-)
-
-/*
- * Non-common initial register values which have to be loaded into the
- * card at boot time and after each reset.
- */
-
-/* Register dumps are done per operation mode */
-#define AR5K_INI_RFGAIN_5GHZ		0
-#define AR5K_INI_RFGAIN_2GHZ		1
-
-#define AR5K_INI_VAL_11A		0
-#define AR5K_INI_VAL_11A_TURBO		1
-#define AR5K_INI_VAL_11B		2
-#define AR5K_INI_VAL_11G		3
-#define AR5K_INI_VAL_11G_TURBO		4
-#define AR5K_INI_VAL_XR			0
-#define AR5K_INI_VAL_MAX		5
-
-#define AR5K_RF5111_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
-#define AR5K_RF5112_INI_RF_MAX_BANKS	AR5K_MAX_RF_BANKS
+	union {
+		struct ath5k_hw_5210_tx_desc	ds_tx5210;
+		struct ath5k_hw_5212_tx_desc	ds_tx5212;
+		struct ath5k_hw_all_rx_desc	ds_rx;
+	} ud;
+} __packed;
 
-static inline u32 ath5k_hw_bitswap(u32 val, unsigned int bits)
-{
-	u32 retval = 0, bit, i;
+#define AR5K_RXDESC_INTREQ	0x0020
 
-	for (i = 0; i < bits; i++) {
-		bit = (val >> i) & 1;
-		retval = (retval << 1) | bit;
-	}
+#define AR5K_TXDESC_CLRDMASK	0x0001
+#define AR5K_TXDESC_NOACK	0x0002	/*[5211+]*/
+#define AR5K_TXDESC_RTSENA	0x0004
+#define AR5K_TXDESC_CTSENA	0x0008
+#define AR5K_TXDESC_INTREQ	0x0010
+#define AR5K_TXDESC_VEOL	0x0020	/*[5211+]*/
 
-	return retval;
-}

drivers/net/wireless/ath5k/dma.c

@@ -0,0 +1,566 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* DMA and interrupt masking functions *
+\*************************************/
+
+/*
+ * dma.c - DMA and interrupt masking functions
+ *
+ * Here we setup descriptor pointers (rxdp/txdp) start/stop dma engine and
+ * handle queue setup for 5210 chipset (rest are handled on qcu.c).
+ * Also we setup interrupt mask register (IMR) and read the various iterrupt
+ * status registers (ISR).
+ *
+ * TODO: Handle SISR on 5211+ and introduce a function to return the queue
+ * number that resulted the interrupt.
+ */
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*********\
+* Receive *
+\*********/
+
+/**
+ * ath5k_hw_start_rx_dma - Start DMA receive
+ *
+ * @ah:	The &struct ath5k_hw
+ */
+void ath5k_hw_start_rx_dma(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
+	ath5k_hw_reg_read(ah, AR5K_CR);
+}
+
+/**
+ * ath5k_hw_stop_rx_dma - Stop DMA receive
+ *
+ * @ah:	The &struct ath5k_hw
+ */
+int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
+{
+	unsigned int i;
+
+	ATH5K_TRACE(ah->ah_sc);
+	ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
+
+	/*
+	 * It may take some time to disable the DMA receive unit
+	 */
+	for (i = 2000; i > 0 &&
+			(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
+			i--)
+		udelay(10);
+
+	return i ? 0 : -EBUSY;
+}
+
+/**
+ * ath5k_hw_get_rxdp - Get RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * XXX: Is RXDP read and clear ?
+ */
+u32 ath5k_hw_get_rxdp(struct ath5k_hw *ah)
+{
+	return ath5k_hw_reg_read(ah, AR5K_RXDP);
+}
+
+/**
+ * ath5k_hw_set_rxdp - Set RX Descriptor's address
+ *
+ * @ah: The &struct ath5k_hw
+ * @phys_addr: RX descriptor address
+ *
+ * XXX: Should we check if rx is enabled before setting rxdp ?
+ */
+void ath5k_hw_set_rxdp(struct ath5k_hw *ah, u32 phys_addr)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
+}
+
+
+/**********\
+* Transmit *
+\**********/
+
+/**
+ * ath5k_hw_start_tx_dma - Start DMA transmit for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Start DMA transmit for a specific queue and since 5210 doesn't have
+ * QCU/DCU, set up queue parameters for 5210 here based on queue type (one
+ * queue for normal data and one queue for beacons). For queue setup
+ * on newer chips check out qcu.c. Returns -EINVAL if queue number is out
+ * of range or if queue is already disabled.
+ *
+ * NOTE: Must be called after setting up tx control descriptor for that
+ * queue (see below).
+ */
+int ath5k_hw_start_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+	u32 tx_queue;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return -EIO;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+		/*
+		 * Set the queue by type on 5210
+		 */
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+					AR5K_BSR);
+			break;
+		case AR5K_TX_QUEUE_CAB:
+			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
+			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
+				AR5K_BCR_BDMAE, AR5K_BSR);
+			break;
+		default:
+			return -EINVAL;
+		}
+		/* Start queue */
+		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
+	} else {
+		/* Return if queue is disabled */
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
+			return -EIO;
+
+		/* Start queue */
+		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
+	}
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_stop_tx_dma - Stop DMA transmit on a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Stop DMA transmit on a specific hw queue and drain queue so we don't
+ * have any pending frames. Returns -EBUSY if we still have pending frames,
+ * -EINVAL if queue number is out of range.
+ *
+ * TODO: Test queue drain code
+ */
+int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
+{
+	unsigned int i = 100;
+	u32 tx_queue, pending;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return -EIO;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
+
+		/*
+		 * Set by queue type
+		 */
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			/* XXX Fix me... */
+			tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
+			ath5k_hw_reg_write(ah, 0, AR5K_BSR);
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* Stop queue */
+		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
+		ath5k_hw_reg_read(ah, AR5K_CR);
+	} else {
+		/*
+		 * Schedule TX disable and wait until queue is empty
+		 */
+		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
+
+		/*Check for pending frames*/
+		do {
+			pending = ath5k_hw_reg_read(ah,
+				AR5K_QUEUE_STATUS(queue)) &
+				AR5K_QCU_STS_FRMPENDCNT;
+			udelay(100);
+		} while (--i && pending);
+
+		/* Clear register */
+		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
+		if (pending)
+			return -EBUSY;
+	}
+
+	/* TODO: Check for success else return error */
+	return 0;
+}
+
+/**
+ * ath5k_hw_get_txdp - Get TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Get TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and use tx queue type since we only have 2 queues.
+ * We use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just read the corresponding TXDP register.
+ *
+ * XXX: Is TXDP read and clear ?
+ */
+u32 ath5k_hw_get_txdp(struct ath5k_hw *ah, unsigned int queue)
+{
+	u16 tx_reg;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/*
+	 * Get the transmit queue descriptor pointer from the selected queue
+	 */
+	/*5210 doesn't have QCU*/
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_reg = AR5K_NOQCU_TXDP0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			tx_reg = AR5K_NOQCU_TXDP1;
+			break;
+		default:
+			return 0xffffffff;
+		}
+	} else {
+		tx_reg = AR5K_QUEUE_TXDP(queue);
+	}
+
+	return ath5k_hw_reg_read(ah, tx_reg);
+}
+
+/**
+ * ath5k_hw_set_txdp - Set TX Descriptor's address for a specific queue
+ *
+ * @ah: The &struct ath5k_hw
+ * @queue: The hw queue number
+ *
+ * Set TX descriptor's address for a specific queue. For 5210 we ignore
+ * the queue number and we use tx queue type since we only have 2 queues
+ * so as above we use TXDP0 for normal data queue and TXDP1 for beacon queue.
+ * For newer chips with QCU/DCU we just set the corresponding TXDP register.
+ * Returns -EINVAL if queue type is invalid for 5210 and -EIO if queue is still
+ * active.
+ */
+int ath5k_hw_set_txdp(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
+{
+	u16 tx_reg;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/*
+	 * Set the transmit queue descriptor pointer register by type
+	 * on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (ah->ah_txq[queue].tqi_type) {
+		case AR5K_TX_QUEUE_DATA:
+			tx_reg = AR5K_NOQCU_TXDP0;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			tx_reg = AR5K_NOQCU_TXDP1;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		/*
+		 * Set the transmit queue descriptor pointer for
+		 * the selected queue on QCU for 5211+
+		 * (this won't work if the queue is still active)
+		 */
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
+			return -EIO;
+
+		tx_reg = AR5K_QUEUE_TXDP(queue);
+	}
+
+	/* Set descriptor pointer */
+	ath5k_hw_reg_write(ah, phys_addr, tx_reg);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_update_tx_triglevel - Update tx trigger level
+ *
+ * @ah: The &struct ath5k_hw
+ * @increase: Flag to force increase of trigger level
+ *
+ * This function increases/decreases the tx trigger level for the tx fifo
+ * buffer (aka FIFO threshold) that is used to indicate when PCU flushes
+ * the buffer and transmits it's data. Lowering this results sending small
+ * frames more quickly but can lead to tx underruns, raising it a lot can
+ * result other problems (i think bmiss is related). Right now we start with
+ * the lowest possible (64Bytes) and if we get tx underrun we increase it using
+ * the increase flag. Returns -EIO if we have have reached maximum/minimum.
+ *
+ * XXX: Link this with tx DMA size ?
+ * XXX: Use it to save interrupts ?
+ * TODO: Needs testing, i think it's related to bmiss...
+ */
+int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
+{
+	u32 trigger_level, imr;
+	int ret = -EIO;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*
+	 * Disable interrupts by setting the mask
+	 */
+	imr = ath5k_hw_set_imr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
+
+	trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
+			AR5K_TXCFG_TXFULL);
+
+	if (!increase) {
+		if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
+			goto done;
+	} else
+		trigger_level +=
+			((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
+
+	/*
+	 * Update trigger level on success
+	 */
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
+	else
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+				AR5K_TXCFG_TXFULL, trigger_level);
+
+	ret = 0;
+
+done:
+	/*
+	 * Restore interrupt mask
+	 */
+	ath5k_hw_set_imr(ah, imr);
+
+	return ret;
+}
+
+/*******************\
+* Interrupt masking *
+\*******************/
+
+/**
+ * ath5k_hw_is_intr_pending - Check if we have pending interrupts
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Check if we have pending interrupts to process. Returns 1 if we
+ * have pending interrupts and 0 if we haven't.
+ */
+bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	return ath5k_hw_reg_read(ah, AR5K_INTPEND);
+}
+
+/**
+ * ath5k_hw_get_isr - Get interrupt status
+ *
+ * @ah: The @struct ath5k_hw
+ * @interrupt_mask: Driver's interrupt mask used to filter out
+ * interrupts in sw.
+ *
+ * This function is used inside our interrupt handler to determine the reason
+ * for the interrupt by reading Primary Interrupt Status Register. Returns an
+ * abstract interrupt status mask which is mostly ISR with some uncommon bits
+ * being mapped on some standard non hw-specific positions
+ * (check out &ath5k_int).
+ *
+ * NOTE: We use read-and-clear register, so after this function is called ISR
+ * is zeroed.
+ *
+ * XXX: Why filter interrupts in sw with interrupt_mask ? No benefit at all
+ * plus it can be misleading (one might thing that we save interrupts this way)
+ */
+int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
+{
+	u32 data;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*
+	 * Read interrupt status from the Interrupt Status register
+	 * on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		data = ath5k_hw_reg_read(ah, AR5K_ISR);
+		if (unlikely(data == AR5K_INT_NOCARD)) {
+			*interrupt_mask = data;
+			return -ENODEV;
+		}
+	} else {
+		/*
+		 * Read interrupt status from the Read-And-Clear
+		 * shadow register.
+		 * Note: PISR/SISR Not available on 5210
+		 */
+		data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
+	}
+
+	/*
+	 * Get abstract interrupt mask (driver-compatible)
+	 */
+	*interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
+
+	if (unlikely(data == AR5K_INT_NOCARD))
+		return -ENODEV;
+
+	if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
+		*interrupt_mask |= AR5K_INT_RX;
+
+	if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
+		| AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
+		*interrupt_mask |= AR5K_INT_TX;
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/*HIU = Host Interface Unit (PCI etc)*/
+		if (unlikely(data & (AR5K_ISR_HIUERR)))
+			*interrupt_mask |= AR5K_INT_FATAL;
+
+		/*Beacon Not Ready*/
+		if (unlikely(data & (AR5K_ISR_BNR)))
+			*interrupt_mask |= AR5K_INT_BNR;
+	}
+
+	/*
+	 * XXX: BMISS interrupts may occur after association.
+	 * I found this on 5210 code but it needs testing. If this is
+	 * true we should disable them before assoc and re-enable them
+	 * after a successfull assoc + some jiffies.
+	 */
+#if 0
+	interrupt_mask &= ~AR5K_INT_BMISS;
+#endif
+
+	/*
+	 * In case we didn't handle anything,
+	 * print the register value.
+	 */
+	if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
+		ATH5K_PRINTF("0x%08x\n", data);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_set_imr - Set interrupt mask
+ *
+ * @ah: The &struct ath5k_hw
+ * @new_mask: The new interrupt mask to be set
+ *
+ * Set the interrupt mask in hw to save interrupts. We do that by mapping
+ * ath5k_int bits to hw-specific bits to remove abstraction and writing
+ * Interrupt Mask Register.
+ */
+enum ath5k_int ath5k_hw_set_imr(struct ath5k_hw *ah, enum ath5k_int new_mask)
+{
+	enum ath5k_int old_mask, int_mask;
+
+	/*
+	 * Disable card interrupts to prevent any race conditions
+	 * (they will be re-enabled afterwards).
+	 */
+	ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
+
+	old_mask = ah->ah_imr;
+
+	/*
+	 * Add additional, chipset-dependent interrupt mask flags
+	 * and write them to the IMR (interrupt mask register).
+	 */
+	int_mask = new_mask & AR5K_INT_COMMON;
+
+	if (new_mask & AR5K_INT_RX)
+		int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
+			AR5K_IMR_RXDESC;
+
+	if (new_mask & AR5K_INT_TX)
+		int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
+			AR5K_IMR_TXURN;
+
+	if (ah->ah_version != AR5K_AR5210) {
+		if (new_mask & AR5K_INT_FATAL) {
+			int_mask |= AR5K_IMR_HIUERR;
+			AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
+					AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
+		}
+	}
+
+	ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
+
+	/* Store new interrupt mask */
+	ah->ah_imr = new_mask;
+
+	/* ..re-enable interrupts */
+	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
+	ath5k_hw_reg_read(ah, AR5K_IER);
+
+	return old_mask;
+}
+

drivers/net/wireless/ath5k/eeprom.c

@@ -0,0 +1,466 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*************************************\
+* EEPROM access functions and helpers *
+\*************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Read from eeprom
+ */
+static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
+{
+	u32 status, timeout;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/*
+	 * Initialize EEPROM access
+	 */
+	if (ah->ah_version == AR5K_AR5210) {
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
+		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
+	} else {
+		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
+				AR5K_EEPROM_CMD_READ);
+	}
+
+	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
+		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
+		if (status & AR5K_EEPROM_STAT_RDDONE) {
+			if (status & AR5K_EEPROM_STAT_RDERR)
+				return -EIO;
+			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
+					0xffff);
+			return 0;
+		}
+		udelay(15);
+	}
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin,
+				unsigned int mode)
+{
+	u16 val;
+
+	if (bin == AR5K_EEPROM_CHANNEL_DIS)
+		return bin;
+
+	if (mode == AR5K_EEPROM_MODE_11A) {
+		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = (5 * bin) + 4800;
+		else
+			val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+				(bin * 10) + 5100;
+	} else {
+		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = bin + 2300;
+		else
+			val = bin + 2400;
+	}
+
+	return val;
+}
+
+/*
+ * Read antenna infos from eeprom
+ */
+static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
+		unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 o = *offset;
+	u16 val;
+	int ret, i = 0;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_switch_settling[mode]	= (val >> 8) & 0x7f;
+	ee->ee_ant_tx_rx[mode]		= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	= (val >> 10) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 4) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 2) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 14) & 0x3;
+	ee->ee_ant_control[mode][i++]	= (val >> 8) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	/* Get antenna modes */
+	ah->ah_antenna[mode][0] =
+	    (ee->ee_ant_control[mode][0] << 4) | 0x1;
+	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
+	     ee->ee_ant_control[mode][1] 	|
+	    (ee->ee_ant_control[mode][2] << 6) 	|
+	    (ee->ee_ant_control[mode][3] << 12) |
+	    (ee->ee_ant_control[mode][4] << 18) |
+	    (ee->ee_ant_control[mode][5] << 24);
+	ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
+	     ee->ee_ant_control[mode][6] 	|
+	    (ee->ee_ant_control[mode][7] << 6) 	|
+	    (ee->ee_ant_control[mode][8] << 12) |
+	    (ee->ee_ant_control[mode][9] << 18) |
+	    (ee->ee_ant_control[mode][10] << 24);
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Read supported modes from eeprom
+ */
+static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
+		unsigned int mode)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 o = *offset;
+	u16 val;
+	int ret;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xlna_enable[mode]	= (val >> 8) & 0xff;
+	ee->ee_thr_62[mode]		= val & 0xff;
+
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xpa_disable[mode]	= (val >> 8) & 0xff;
+	ee->ee_tx_frm2xpa_enable[mode]	= val & 0xff;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_pga_desired_size[mode]	= (val >> 8) & 0xff;
+
+	if ((val & 0xff) & 0x80)
+		ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+	else
+		ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_noise_floor_thr[mode] =
+		    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_xlna_gain[mode]		= (val >> 5) & 0xff;
+	ee->ee_x_gain[mode]		= (val >> 1) & 0xf;
+	ee->ee_xpd[mode]		= val & 0x1;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
+		ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+		if (mode == AR5K_EEPROM_MODE_11A)
+			ee->ee_xr_power[mode] = val & 0x3f;
+		else {
+			ee->ee_ob[mode][0] = val & 0x7;
+			ee->ee_db[mode][0] = (val >> 3) & 0x7;
+		}
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
+		ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+		ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+	} else {
+		ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+		if (mode == AR5K_EEPROM_MODE_11G)
+			ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+			mode == AR5K_EEPROM_MODE_11A) {
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
+	    mode == AR5K_EEPROM_MODE_11G)
+		ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Initialize eeprom & capabilities structs
+ */
+int ath5k_eeprom_init(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	unsigned int mode, i;
+	int ret;
+	u32 offset;
+	u16 val;
+
+	/* Initial TX thermal adjustment values */
+	ee->ee_tx_clip = 4;
+	ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
+	ee->ee_gain_select = 1;
+
+	/*
+	 * Read values from EEPROM and store them in the capability structure
+	 */
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
+
+	/* Return if we have an old EEPROM */
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
+		return 0;
+
+#ifdef notyet
+	/*
+	 * Validate the checksum of the EEPROM date. There are some
+	 * devices with invalid EEPROMs.
+	 */
+	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+		cksum ^= val;
+	}
+	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+		return -EIO;
+	}
+#endif
+
+	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
+	    ee_ant_gain);
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
+		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
+	}
+
+	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+	}
+
+	/*
+	 * Get conformance test limit values
+	 */
+	offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
+	ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
+
+	for (i = 0; i < ee->ee_ctls; i++) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_ctl[i] = (val >> 8) & 0xff;
+		ee->ee_ctl[i + 1] = val & 0xff;
+	}
+
+	/*
+	 * Get values for 802.11a (5GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11A;
+
+	ee->ee_turbo_max_power[mode] =
+			AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+	offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
+
+	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	ee->ee_ob[mode][3]		= (val >> 5) & 0x7;
+	ee->ee_db[mode][3]		= (val >> 2) & 0x7;
+	ee->ee_ob[mode][2]		= (val << 1) & 0x7;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_ob[mode][2]		|= (val >> 15) & 0x1;
+	ee->ee_db[mode][2]		= (val >> 12) & 0x7;
+	ee->ee_ob[mode][1]		= (val >> 9) & 0x7;
+	ee->ee_db[mode][1]		= (val >> 6) & 0x7;
+	ee->ee_ob[mode][0]		= (val >> 3) & 0x7;
+	ee->ee_db[mode][0]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_margin_tx_rx[mode] = val & 0x3f;
+	}
+
+	/*
+	 * Get values for 802.11b (2.4GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11B;
+	offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
+
+	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
+	ee->ee_db[mode][1]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][0] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+		ee->ee_cal_pier[mode][1] =
+			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][2] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+	}
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+		ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+	/*
+	 * Get values for 802.11g (2.4GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11G;
+	offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
+
+	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
+	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
+	ee->ee_db[mode][1]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][0] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+		ee->ee_cal_pier[mode][1] =
+			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_turbo_max_power[mode] = val & 0x7f;
+		ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_cal_pier[mode][2] =
+			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
+			AR5K_EEPROM_READ(offset++, val);
+			ee->ee_cck_ofdm_gain_delta = val & 0xff;
+		}
+	}
+
+	/*
+	 * Read 5GHz EEPROM channels
+	 */
+
+	return 0;
+}
+
+/*
+ * Read the MAC address from eeprom
+ */
+int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
+{
+	u8 mac_d[ETH_ALEN];
+	u32 total, offset;
+	u16 data;
+	int octet, ret;
+
+	memset(mac, 0, ETH_ALEN);
+	memset(mac_d, 0, ETH_ALEN);
+
+	ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
+	if (ret)
+		return ret;
+
+	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
+		ret = ath5k_hw_eeprom_read(ah, offset, &data);
+		if (ret)
+			return ret;
+
+		total += data;
+		mac_d[octet + 1] = data & 0xff;
+		mac_d[octet] = data >> 8;
+		octet += 2;
+	}
+
+	memcpy(mac, mac_d, ETH_ALEN);
+
+	if (!total || total == 3 * 0xffff)
+		return -EINVAL;
+
+	return 0;
+}
+

drivers/net/wireless/ath5k/eeprom.h

@@ -0,0 +1,215 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*
+ * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_MAGIC		0x003d	/* EEPROM Magic number */
+#define AR5K_EEPROM_MAGIC_VALUE		0x5aa5	/* Default - found on EEPROM */
+#define AR5K_EEPROM_MAGIC_5212		0x0000145c /* 5212 */
+#define AR5K_EEPROM_MAGIC_5211		0x0000145b /* 5211 */
+#define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
+
+#define AR5K_EEPROM_PROTECT		0x003f	/* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31	0x0001	/* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31	0x0002	/* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63	0x0004	/* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63	0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127	0x0010	/* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127	0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191	0x0040	/* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191	0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207	0x0100	/* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207	0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223	0x0400	/* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223	0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239	0x1000	/* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239	0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255	0x4000	/* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255	0x8000
+#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
+#define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM		0xffff
+#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)	/* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0		0x3000	/* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1		0x3001	/* ob/db values for 2Ghz (ar5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2		0x3002	/* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3		0x3003	/* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4		0x3004	/* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0		0x4000	/* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1		0x4001	/* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2		0x4002	/* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3		0x4003
+#define AR5K_EEPROM_VERSION_4_4		0x4004
+#define AR5K_EEPROM_VERSION_4_5		0x4005
+#define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7		0x4007
+
+#define AR5K_EEPROM_MODE_11A		0
+#define AR5K_EEPROM_MODE_11B		1
+#define AR5K_EEPROM_MODE_11G		2
+
+#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2Ghz (?) */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
+#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz (?) */
+#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
+
+#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
+#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S	1
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v)	AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)	((int8_t)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)	((int8_t)((_v) & 0xff))
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v)	AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v)	AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v)	AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v)		AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)	/* Conformance test limits */
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ		0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ		0x00ed
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0		0x00c4
+#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
+#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
+#define AR5K_EEPROM_MISC1		0x00c5
+#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
+
+
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE		100
+#define AR5K_EEPROM_EEP_DELTA		10
+#define AR5K_EEPROM_N_MODES		3
+#define AR5K_EEPROM_N_5GHZ_CHAN		10
+#define AR5K_EEPROM_N_2GHZ_CHAN		3
+#define AR5K_EEPROM_MAX_CHAN		10
+#define AR5K_EEPROM_N_PCDAC		11
+#define AR5K_EEPROM_N_TEST_FREQ		8
+#define AR5K_EEPROM_N_EDGES		8
+#define AR5K_EEPROM_N_INTERCEPTS	11
+#define AR5K_EEPROM_FREQ_M(_v)		AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M		0x3f
+#define AR5K_EEPROM_PCDAC_START		1
+#define AR5K_EEPROM_PCDAC_STOP		63
+#define AR5K_EEPROM_PCDAC_STEP		1
+#define AR5K_EEPROM_NON_EDGE_M		0x40
+#define AR5K_EEPROM_CHANNEL_POWER	8
+#define AR5K_EEPROM_N_OBDB		4
+#define AR5K_EEPROM_OBDB_DIS		0xffff
+#define AR5K_EEPROM_CHANNEL_DIS		0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x)	(((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v)		AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS		32
+#define AR5K_EEPROM_N_XPD_PER_CHANNEL	4
+#define AR5K_EEPROM_N_XPD0_POINTS	4
+#define AR5K_EEPROM_N_XPD3_POINTS	3
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ	35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ	55
+#define AR5K_EEPROM_POWER_M		0x3f
+#define AR5K_EEPROM_POWER_MIN		0
+#define AR5K_EEPROM_POWER_MAX		3150
+#define AR5K_EEPROM_POWER_STEP		50
+#define AR5K_EEPROM_POWER_TABLE_SIZE	64
+#define AR5K_EEPROM_N_POWER_LOC_11B	4
+#define AR5K_EEPROM_N_POWER_LOC_11G	6
+#define AR5K_EEPROM_I_GAIN		10
+#define AR5K_EEPROM_CCK_OFDM_DELTA	15
+#define AR5K_EEPROM_N_IQ_CAL		2
+
+#define AR5K_EEPROM_READ(_o, _v) do {			\
+	ret = ath5k_hw_eeprom_read(ah, (_o), &(_v));	\
+	if (ret)					\
+		return ret;				\
+} while (0)
+
+#define AR5K_EEPROM_READ_HDR(_o, _v)					\
+	AR5K_EEPROM_READ(_o, ah->ah_capabilities.cap_eeprom._v);	\
+
+/* Struct to hold EEPROM calibration data */
+struct ath5k_eeprom_info {
+	u16	ee_magic;
+	u16	ee_protect;
+	u16	ee_regdomain;
+	u16	ee_version;
+	u16	ee_header;
+	u16	ee_ant_gain;
+	u16	ee_misc0;
+	u16	ee_misc1;
+	u16	ee_cck_ofdm_gain_delta;
+	u16	ee_cck_ofdm_power_delta;
+	u16	ee_scaled_cck_delta;
+
+	/* Used for tx thermal adjustment (eeprom_init, rfregs) */
+	u16	ee_tx_clip;
+	u16	ee_pwd_84;
+	u16	ee_pwd_90;
+	u16	ee_gain_select;
+
+	/* RF Calibration settings (reset, rfregs) */
+	u16	ee_i_cal[AR5K_EEPROM_N_MODES];
+	u16	ee_q_cal[AR5K_EEPROM_N_MODES];
+	u16	ee_fixed_bias[AR5K_EEPROM_N_MODES];
+	u16	ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+	u16	ee_xr_power[AR5K_EEPROM_N_MODES];
+	u16	ee_switch_settling[AR5K_EEPROM_N_MODES];
+	u16	ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
+	u16	ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+	u16	ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+	u16	ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+	u16	ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+	u16	ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+	u16	ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+	u16	ee_thr_62[AR5K_EEPROM_N_MODES];
+	u16	ee_xlna_gain[AR5K_EEPROM_N_MODES];
+	u16	ee_xpd[AR5K_EEPROM_N_MODES];
+	u16	ee_x_gain[AR5K_EEPROM_N_MODES];
+	u16	ee_i_gain[AR5K_EEPROM_N_MODES];
+	u16	ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+
+	/* Unused */
+	u16	ee_false_detect[AR5K_EEPROM_N_MODES];
+	u16	ee_cal_pier[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_2GHZ_CHAN];
+	u16	ee_channel[AR5K_EEPROM_N_MODES][AR5K_EEPROM_MAX_CHAN]; /*empty*/
+
+	/* Conformance test limits (Unused) */
+	u16	ee_ctls;
+	u16	ee_ctl[AR5K_EEPROM_MAX_CTLS];
+
+	/* Noise Floor Calibration settings */
+	s16	ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+	s8	ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+	s8	ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+};

drivers/net/wireless/ath5k/gpio.c

@@ -0,0 +1,176 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/****************\
+  GPIO Functions
+\****************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Set led state
+ */
+void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
+{
+	u32 led;
+	/*5210 has different led mode handling*/
+	u32 led_5210;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*Reset led status*/
+	if (ah->ah_version != AR5K_AR5210)
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
+			AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
+	else
+		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
+
+	/*
+	 * Some blinking values, define at your wish
+	 */
+	switch (state) {
+	case AR5K_LED_SCAN:
+	case AR5K_LED_AUTH:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
+		led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
+		break;
+
+	case AR5K_LED_INIT:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
+		led_5210 = AR5K_PCICFG_LED_PEND;
+		break;
+
+	case AR5K_LED_ASSOC:
+	case AR5K_LED_RUN:
+		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
+		led_5210 = AR5K_PCICFG_LED_ASSOC;
+		break;
+
+	default:
+		led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
+		led_5210 = AR5K_PCICFG_LED_PEND;
+		break;
+	}
+
+	/*Write new status to the register*/
+	if (ah->ah_version != AR5K_AR5210)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
+	else
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
+}
+
+/*
+ * Set GPIO inputs
+ */
+int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return -EINVAL;
+
+	ath5k_hw_reg_write(ah,
+		(ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+		| AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
+
+	return 0;
+}
+
+/*
+ * Set GPIO outputs
+ */
+int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return -EINVAL;
+
+	ath5k_hw_reg_write(ah,
+		(ath5k_hw_reg_read(ah, AR5K_GPIOCR) & ~AR5K_GPIOCR_OUT(gpio))
+		| AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
+
+	return 0;
+}
+
+/*
+ * Get GPIO state
+ */
+u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return 0xffffffff;
+
+	/* GPIO input magic */
+	return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
+		0x1;
+}
+
+/*
+ * Set GPIO state
+ */
+int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
+{
+	u32 data;
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (gpio > AR5K_NUM_GPIO)
+		return -EINVAL;
+
+	/* GPIO output magic */
+	data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+	data &= ~(1 << gpio);
+	data |= (val & 1) << gpio;
+
+	ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
+
+	return 0;
+}
+
+/*
+ * Initialize the GPIO interrupt (RFKill switch)
+ */
+void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
+		u32 interrupt_level)
+{
+	u32 data;
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (gpio > AR5K_NUM_GPIO)
+		return;
+
+	/*
+	 * Set the GPIO interrupt
+	 */
+	data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
+		~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
+		AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
+		(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
+
+	ath5k_hw_reg_write(ah, interrupt_level ? data :
+		(data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
+
+	ah->ah_imr |= AR5K_IMR_GPIO;
+
+	/* Enable GPIO interrupts */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
+}
+

drivers/net/wireless/ath5k/hw.c

@@ -1,4492 +0,0 @@
-/*
- * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Matthew W. S. Bell  <mentor@madwifi.org>
- * Copyright (c) 2007 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
- * Copyright (c) 2007 Pavel Roskin <proski@gnu.org>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
- *
- * Permission to use, copy, modify, and distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-/*
- * HW related functions for Atheros Wireless LAN devices.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "reg.h"
-#include "base.h"
-#include "debug.h"
-
-/* Prototypes */
-static int ath5k_hw_nic_reset(struct ath5k_hw *, u32);
-static int ath5k_hw_nic_wakeup(struct ath5k_hw *, int, bool);
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
-	unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
-	unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
-	unsigned int, unsigned int);
-static int ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
-	unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
-	unsigned int);
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *, struct ath5k_desc *,
-					 struct ath5k_tx_status *);
-static int ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *, struct ath5k_desc *,
-	unsigned int, unsigned int, enum ath5k_pkt_type, unsigned int,
-	unsigned int, unsigned int, unsigned int, unsigned int, unsigned int,
-	unsigned int, unsigned int);
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *, struct ath5k_desc *,
-					 struct ath5k_tx_status *);
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *, struct ath5k_desc *,
-					struct ath5k_rx_status *);
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *, struct ath5k_desc *,
-					struct ath5k_rx_status *);
-static int ath5k_hw_get_capabilities(struct ath5k_hw *);
-
-static int ath5k_eeprom_init(struct ath5k_hw *);
-static int ath5k_eeprom_read_mac(struct ath5k_hw *, u8 *);
-
-static int ath5k_hw_enable_pspoll(struct ath5k_hw *, u8 *, u16);
-static int ath5k_hw_disable_pspoll(struct ath5k_hw *);
-
-/*
- * Enable to overwrite the country code (use "00" for debug)
- */
-#if 0
-#define COUNTRYCODE "00"
-#endif
-
-/*******************\
-  General Functions
-\*******************/
-
-/*
- * Functions used internaly
- */
-
-static inline unsigned int ath5k_hw_htoclock(unsigned int usec, bool turbo)
-{
-	return turbo ? (usec * 80) : (usec * 40);
-}
-
-static inline unsigned int ath5k_hw_clocktoh(unsigned int clock, bool turbo)
-{
-	return turbo ? (clock / 80) : (clock / 40);
-}
-
-/*
- * Check if a register write has been completed
- */
-int ath5k_hw_register_timeout(struct ath5k_hw *ah, u32 reg, u32 flag, u32 val,
-		bool is_set)
-{
-	int i;
-	u32 data;
-
-	for (i = AR5K_TUNE_REGISTER_TIMEOUT; i > 0; i--) {
-		data = ath5k_hw_reg_read(ah, reg);
-		if (is_set && (data & flag))
-			break;
-		else if ((data & flag) == val)
-			break;
-		udelay(15);
-	}
-
-	return (i <= 0) ? -EAGAIN : 0;
-}
-
-
-/***************************************\
-	Attach/Detach Functions
-\***************************************/
-
-/*
- * Power On Self Test helper function
- */
-static int ath5k_hw_post(struct ath5k_hw *ah)
-{
-
-	int i, c;
-	u16 cur_reg;
-	u16 regs[2] = {AR5K_STA_ID0, AR5K_PHY(8)};
-	u32 var_pattern;
-	u32 static_pattern[4] = {
-		0x55555555,	0xaaaaaaaa,
-		0x66666666,	0x99999999
-	};
-	u32 init_val;
-	u32 cur_val;
-
-	for (c = 0; c < 2; c++) {
-
-		cur_reg = regs[c];
-
-		/* Save previous value */
-		init_val = ath5k_hw_reg_read(ah, cur_reg);
-
-		for (i = 0; i < 256; i++) {
-			var_pattern = i << 16 | i;
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-			cur_val = ath5k_hw_reg_read(ah, cur_reg);
-
-			if (cur_val != var_pattern) {
-				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
-				return -EAGAIN;
-			}
-
-			/* Found on ndiswrapper dumps */
-			var_pattern = 0x0039080f;
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-		}
-
-		for (i = 0; i < 4; i++) {
-			var_pattern = static_pattern[i];
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-			cur_val = ath5k_hw_reg_read(ah, cur_reg);
-
-			if (cur_val != var_pattern) {
-				ATH5K_ERR(ah->ah_sc, "POST Failed !!!\n");
-				return -EAGAIN;
-			}
-
-			/* Found on ndiswrapper dumps */
-			var_pattern = 0x003b080f;
-			ath5k_hw_reg_write(ah, var_pattern, cur_reg);
-		}
-
-		/* Restore previous value */
-		ath5k_hw_reg_write(ah, init_val, cur_reg);
-
-	}
-
-	return 0;
-
-}
-
-/*
- * Check if the device is supported and initialize the needed structs
- */
-struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc, u8 mac_version)
-{
-	struct ath5k_hw *ah;
-	struct pci_dev *pdev = sc->pdev;
-	u8 mac[ETH_ALEN];
-	int ret;
-	u32 srev;
-
-	/*If we passed the test malloc a ath5k_hw struct*/
-	ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
-	if (ah == NULL) {
-		ret = -ENOMEM;
-		ATH5K_ERR(sc, "out of memory\n");
-		goto err;
-	}
-
-	ah->ah_sc = sc;
-	ah->ah_iobase = sc->iobase;
-
-	/*
-	 * HW information
-	 */
-
-	ah->ah_op_mode = IEEE80211_IF_TYPE_STA;
-	ah->ah_radar.r_enabled = AR5K_TUNE_RADAR_ALERT;
-	ah->ah_turbo = false;
-	ah->ah_txpower.txp_tpc = AR5K_TUNE_TPC_TXPOWER;
-	ah->ah_imr = 0;
-	ah->ah_atim_window = 0;
-	ah->ah_aifs = AR5K_TUNE_AIFS;
-	ah->ah_cw_min = AR5K_TUNE_CWMIN;
-	ah->ah_limit_tx_retries = AR5K_INIT_TX_RETRY;
-	ah->ah_software_retry = false;
-	ah->ah_ant_diversity = AR5K_TUNE_ANT_DIVERSITY;
-
-	/*
-	 * Set the mac revision based on the pci id
-	 */
-	ah->ah_version = mac_version;
-
-	/*Fill the ath5k_hw struct with the needed functions*/
-	if (ah->ah_version == AR5K_AR5212)
-		ah->ah_magic = AR5K_EEPROM_MAGIC_5212;
-	else if (ah->ah_version == AR5K_AR5211)
-		ah->ah_magic = AR5K_EEPROM_MAGIC_5211;
-
-	if (ah->ah_version == AR5K_AR5212) {
-		ah->ah_setup_tx_desc = ath5k_hw_setup_4word_tx_desc;
-		ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
-		ah->ah_proc_tx_desc = ath5k_hw_proc_4word_tx_status;
-	} else {
-		ah->ah_setup_tx_desc = ath5k_hw_setup_2word_tx_desc;
-		ah->ah_setup_xtx_desc = ath5k_hw_setup_xr_tx_desc;
-		ah->ah_proc_tx_desc = ath5k_hw_proc_2word_tx_status;
-	}
-
-	if (ah->ah_version == AR5K_AR5212)
-		ah->ah_proc_rx_desc = ath5k_hw_proc_5212_rx_status;
-	else if (ah->ah_version <= AR5K_AR5211)
-		ah->ah_proc_rx_desc = ath5k_hw_proc_5210_rx_status;
-
-	/* Bring device out of sleep and reset it's units */
-	ret = ath5k_hw_nic_wakeup(ah, AR5K_INIT_MODE, true);
-	if (ret)
-		goto err_free;
-
-	/* Get MAC, PHY and RADIO revisions */
-	srev = ath5k_hw_reg_read(ah, AR5K_SREV);
-	ah->ah_mac_srev = srev;
-	ah->ah_mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER);
-	ah->ah_mac_revision = AR5K_REG_MS(srev, AR5K_SREV_REV);
-	ah->ah_phy_revision = ath5k_hw_reg_read(ah, AR5K_PHY_CHIP_ID) &
-			0xffffffff;
-	ah->ah_radio_5ghz_revision = ath5k_hw_radio_revision(ah,
-			CHANNEL_5GHZ);
-
-	if (ah->ah_version == AR5K_AR5210)
-		ah->ah_radio_2ghz_revision = 0;
-	else
-		ah->ah_radio_2ghz_revision = ath5k_hw_radio_revision(ah,
-				CHANNEL_2GHZ);
-
-	/* Return on unsuported chips (unsupported eeprom etc) */
-	if ((srev >= AR5K_SREV_VER_AR5416) &&
-	(srev < AR5K_SREV_VER_AR2425)) {
-		ATH5K_ERR(sc, "Device not yet supported.\n");
-		ret = -ENODEV;
-		goto err_free;
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ATH5K_WARN(sc, "Support for RF2425 is under development.\n");
-	}
-
-	/* Identify single chip solutions */
-	if (((srev <= AR5K_SREV_VER_AR5414) &&
-	(srev >= AR5K_SREV_VER_AR2413)) ||
-	(srev == AR5K_SREV_VER_AR2425)) {
-		ah->ah_single_chip = true;
-	} else {
-		ah->ah_single_chip = false;
-	}
-
-	/* Single chip radio */
-	if (ah->ah_radio_2ghz_revision == ah->ah_radio_5ghz_revision)
-		ah->ah_radio_2ghz_revision = 0;
-
-	/* Identify the radio chip*/
-	if (ah->ah_version == AR5K_AR5210) {
-		ah->ah_radio = AR5K_RF5110;
-	/*
-	 * Register returns 0x0/0x04 for radio revision
-	 * so ath5k_hw_radio_revision doesn't parse the value
-	 * correctly. For now we are based on mac's srev to
-	 * identify RF2425 radio.
-	 */
-	} else if (srev == AR5K_SREV_VER_AR2425) {
-		ah->ah_radio = AR5K_RF2425;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2425;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5112) {
-		ah->ah_radio = AR5K_RF5111;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5111;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC0) {
-		ah->ah_radio = AR5K_RF5112;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5112;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC1) {
-		ah->ah_radio = AR5K_RF2413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_SC2) {
-		ah->ah_radio = AR5K_RF5413;
-		ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
-	} else if (ah->ah_radio_5ghz_revision < AR5K_SREV_RAD_5133) {
-		/* AR5424 */
-		if (srev >= AR5K_SREV_VER_AR5424) {
-			ah->ah_radio = AR5K_RF5413;
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF5413;
-		/* AR2424 */
-		} else {
-			ah->ah_radio = AR5K_RF2413; /* For testing */
-			ah->ah_phy_spending = AR5K_PHY_SPENDING_RF2413;
-		}
-	}
-	ah->ah_phy = AR5K_PHY(0);
-
-	/*
-	 * Write PCI-E power save settings
-	 */
-	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
-		ath5k_hw_reg_write(ah, 0x9248fc00, 0x4080);
-		ath5k_hw_reg_write(ah, 0x24924924, 0x4080);
-		ath5k_hw_reg_write(ah, 0x28000039, 0x4080);
-		ath5k_hw_reg_write(ah, 0x53160824, 0x4080);
-		ath5k_hw_reg_write(ah, 0xe5980579, 0x4080);
-		ath5k_hw_reg_write(ah, 0x001defff, 0x4080);
-		ath5k_hw_reg_write(ah, 0x1aaabe40, 0x4080);
-		ath5k_hw_reg_write(ah, 0xbe105554, 0x4080);
-		ath5k_hw_reg_write(ah, 0x000e3007, 0x4080);
-		ath5k_hw_reg_write(ah, 0x00000000, 0x4084);
-	}
-
-	/*
-	 * POST
-	 */
-	ret = ath5k_hw_post(ah);
-	if (ret)
-		goto err_free;
-
-	/* Write AR5K_PCICFG_UNK on 2112B and later chips */
-	if (ah->ah_radio_5ghz_revision > AR5K_SREV_RAD_2112B ||
-	srev > AR5K_SREV_VER_AR2413) {
-		ath5k_hw_reg_write(ah, AR5K_PCICFG_UNK, AR5K_PCICFG);
-	}
-
-	/*
-	 * Get card capabilities, values, ...
-	 */
-	ret = ath5k_eeprom_init(ah);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to init EEPROM\n");
-		goto err_free;
-	}
-
-	/* Get misc capabilities */
-	ret = ath5k_hw_get_capabilities(ah);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to get device capabilities: 0x%04x\n",
-			sc->pdev->device);
-		goto err_free;
-	}
-
-	/* Get MAC address */
-	ret = ath5k_eeprom_read_mac(ah, mac);
-	if (ret) {
-		ATH5K_ERR(sc, "unable to read address from EEPROM: 0x%04x\n",
-			sc->pdev->device);
-		goto err_free;
-	}
-
-	ath5k_hw_set_lladdr(ah, mac);
-	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
-	memset(ah->ah_bssid, 0xff, ETH_ALEN);
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-	ath5k_hw_set_opmode(ah);
-
-	ath5k_hw_set_rfgain_opt(ah);
-
-	return ah;
-err_free:
-	kfree(ah);
-err:
-	return ERR_PTR(ret);
-}
-
-/*
- * Bring up MAC + PHY Chips
- */
-static int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
-{
-	struct pci_dev *pdev = ah->ah_sc->pdev;
-	u32 turbo, mode, clock, bus_flags;
-	int ret;
-
-	turbo = 0;
-	mode = 0;
-	clock = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Wakeup the device */
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
-		return ret;
-	}
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/*
-		 * Get channel mode flags
-		 */
-
-		if (ah->ah_radio >= AR5K_RF5112) {
-			mode = AR5K_PHY_MODE_RAD_RF5112;
-			clock = AR5K_PHY_PLL_RF5112;
-		} else {
-			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
-			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
-		}
-
-		if (flags & CHANNEL_2GHZ) {
-			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
-			clock |= AR5K_PHY_PLL_44MHZ;
-
-			if (flags & CHANNEL_CCK) {
-				mode |= AR5K_PHY_MODE_MOD_CCK;
-			} else if (flags & CHANNEL_OFDM) {
-				/* XXX Dynamic OFDM/CCK is not supported by the
-				 * AR5211 so we set MOD_OFDM for plain g (no
-				 * CCK headers) operation. We need to test
-				 * this, 5211 might support ofdm-only g after
-				 * all, there are also initial register values
-				 * in the code for g mode (see initvals.c). */
-				if (ah->ah_version == AR5K_AR5211)
-					mode |= AR5K_PHY_MODE_MOD_OFDM;
-				else
-					mode |= AR5K_PHY_MODE_MOD_DYN;
-			} else {
-				ATH5K_ERR(ah->ah_sc,
-					"invalid radio modulation mode\n");
-				return -EINVAL;
-			}
-		} else if (flags & CHANNEL_5GHZ) {
-			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
-			clock |= AR5K_PHY_PLL_40MHZ;
-
-			if (flags & CHANNEL_OFDM)
-				mode |= AR5K_PHY_MODE_MOD_OFDM;
-			else {
-				ATH5K_ERR(ah->ah_sc,
-					"invalid radio modulation mode\n");
-				return -EINVAL;
-			}
-		} else {
-			ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
-			return -EINVAL;
-		}
-
-		if (flags & CHANNEL_TURBO)
-			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
-	} else { /* Reset the device */
-
-		/* ...enable Atheros turbo mode if requested */
-		if (flags & CHANNEL_TURBO)
-			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
-					AR5K_PHY_TURBO);
-	}
-
-	/* reseting PCI on PCI-E cards results card to hang
-	 * and always return 0xffff... so we ingore that flag
-	 * for PCI-E cards */
-	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
-
-	/* Reset chipset */
-	ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
-		AR5K_RESET_CTL_BASEBAND | bus_flags);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	if (ah->ah_version == AR5K_AR5210)
-		udelay(2300);
-
-	/* ...wakeup again!*/
-	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
-		return ret;
-	}
-
-	/* ...final warm reset */
-	if (ath5k_hw_nic_reset(ah, 0)) {
-		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
-		return -EIO;
-	}
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/* ...set the PHY operating mode */
-		ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
-		udelay(300);
-
-		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
-		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
-	}
-
-	return 0;
-}
-
-/*
- * Free the ath5k_hw struct
- */
-void ath5k_hw_detach(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	__set_bit(ATH_STAT_INVALID, ah->ah_sc->status);
-
-	if (ah->ah_rf_banks != NULL)
-		kfree(ah->ah_rf_banks);
-
-	/* assume interrupts are down */
-	kfree(ah);
-}
-
-/****************************\
-  Reset function and helpers
-\****************************/
-
-/**
- * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
- *
- * @ah: the &struct ath5k_hw
- * @channel: the currently set channel upon reset
- *
- * Write the OFDM timings for the AR5212 upon reset. This is a helper for
- * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
- * depending on the bandwidth of the channel.
- *
- */
-static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
-	struct ieee80211_channel *channel)
-{
-	/* Get exponent and mantissa and set it */
-	u32 coef_scaled, coef_exp, coef_man,
-		ds_coef_exp, ds_coef_man, clock;
-
-	if (!(ah->ah_version == AR5K_AR5212) ||
-		!(channel->hw_value & CHANNEL_OFDM))
-		BUG();
-
-	/* Seems there are two PLLs, one for baseband sampling and one
-	 * for tuning. Tuning basebands are 40 MHz or 80MHz when in
-	 * turbo. */
-	clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
-	coef_scaled = ((5 * (clock << 24)) / 2) /
-	channel->center_freq;
-
-	for (coef_exp = 31; coef_exp > 0; coef_exp--)
-		if ((coef_scaled >> coef_exp) & 0x1)
-			break;
-
-	if (!coef_exp)
-		return -EINVAL;
-
-	coef_exp = 14 - (coef_exp - 24);
-	coef_man = coef_scaled +
-		(1 << (24 - coef_exp - 1));
-	ds_coef_man = coef_man >> (24 - coef_exp);
-	ds_coef_exp = coef_exp - 16;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
-	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
-		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
-
-	return 0;
-}
-
-
-/*
- * index into rates for control rates, we can set it up like this because
- * this is only used for AR5212 and we know it supports G mode
- */
-static int control_rates[] =
-	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
-
-/**
- * ath5k_hw_write_rate_duration - set rate duration during hw resets
- *
- * @ah: the &struct ath5k_hw
- * @mode: one of enum ath5k_driver_mode
- *
- * Write the rate duration table upon hw reset. This is a helper for
- * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
- * the hardware for the current mode for each rate. The rates which are capable
- * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
- * register for the short preamble ACK timeout calculation.
- */
-static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
-       unsigned int mode)
-{
-	struct ath5k_softc *sc = ah->ah_sc;
-	struct ieee80211_rate *rate;
-	unsigned int i;
-
-	/* Write rate duration table */
-	for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
-		u32 reg;
-		u16 tx_time;
-
-		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
-
-		/* Set ACK timeout */
-		reg = AR5K_RATE_DUR(rate->hw_value);
-
-		/* An ACK frame consists of 10 bytes. If you add the FCS,
-		 * which ieee80211_generic_frame_duration() adds,
-		 * its 14 bytes. Note we use the control rate and not the
-		 * actual rate for this rate. See mac80211 tx.c
-		 * ieee80211_duration() for a brief description of
-		 * what rate we should choose to TX ACKs. */
-		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
-							sc->vif, 10, rate));
-
-		ath5k_hw_reg_write(ah, tx_time, reg);
-
-		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
-			continue;
-
-		/*
-		 * We're not distinguishing short preamble here,
-		 * This is true, all we'll get is a longer value here
-		 * which is not necessarilly bad. We could use
-		 * export ieee80211_frame_duration() but that needs to be
-		 * fixed first to be properly used by mac802111 drivers:
-		 *
-		 *  - remove erp stuff and let the routine figure ofdm
-		 *    erp rates
-		 *  - remove passing argument ieee80211_local as
-		 *    drivers don't have access to it
-		 *  - move drivers using ieee80211_generic_frame_duration()
-		 *    to this
-		 */
-		ath5k_hw_reg_write(ah, tx_time,
-			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
-	}
-}
-
-/*
- * Main reset function
- */
-int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
-	struct ieee80211_channel *channel, bool change_channel)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	struct pci_dev *pdev = ah->ah_sc->pdev;
-	u32 data, s_seq, s_ant, s_led[3], dma_size;
-	unsigned int i, mode, freq, ee_mode, ant[2];
-	int ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	s_seq = 0;
-	s_ant = 0;
-	ee_mode = 0;
-	freq = 0;
-	mode = 0;
-
-	/*
-	 * Save some registers before a reset
-	 */
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-		if (change_channel) {
-			/* Seq number for queue 0 -do this for all queues ? */
-			s_seq = ath5k_hw_reg_read(ah,
-					AR5K_QUEUE_DFS_SEQNUM(0));
-			/*Default antenna*/
-			s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
-		}
-	}
-
-	/*GPIOs*/
-	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
-	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
-	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
-	if (change_channel && ah->ah_rf_banks != NULL)
-		ath5k_hw_get_rf_gain(ah);
-
-
-	/*Wakeup the device*/
-	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
-	if (ret)
-		return ret;
-
-	/*
-	 * Initialize operating mode
-	 */
-	ah->ah_op_mode = op_mode;
-
-	/*
-	 * 5111/5112 Settings
-	 * 5210 only comes with RF5110
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		if (ah->ah_radio != AR5K_RF5111 &&
-			ah->ah_radio != AR5K_RF5112 &&
-			ah->ah_radio != AR5K_RF5413 &&
-			ah->ah_radio != AR5K_RF2413 &&
-			ah->ah_radio != AR5K_RF2425) {
-			ATH5K_ERR(ah->ah_sc,
-				"invalid phy radio: %u\n", ah->ah_radio);
-			return -EINVAL;
-		}
-
-		switch (channel->hw_value & CHANNEL_MODES) {
-		case CHANNEL_A:
-			mode = AR5K_MODE_11A;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		case CHANNEL_G:
-			mode = AR5K_MODE_11G;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_B:
-			mode = AR5K_MODE_11B;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11B;
-			break;
-		case CHANNEL_T:
-			mode = AR5K_MODE_11A_TURBO;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		/*Is this ok on 5211 too ?*/
-		case CHANNEL_TG:
-			mode = AR5K_MODE_11G_TURBO;
-			freq = AR5K_INI_RFGAIN_2GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11G;
-			break;
-		case CHANNEL_XR:
-			if (ah->ah_version == AR5K_AR5211) {
-				ATH5K_ERR(ah->ah_sc,
-					"XR mode not available on 5211");
-				return -EINVAL;
-			}
-			mode = AR5K_MODE_XR;
-			freq = AR5K_INI_RFGAIN_5GHZ;
-			ee_mode = AR5K_EEPROM_MODE_11A;
-			break;
-		default:
-			ATH5K_ERR(ah->ah_sc,
-				"invalid channel: %d\n", channel->center_freq);
-			return -EINVAL;
-		}
-
-		/* PHY access enable */
-		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
-
-	}
-
-	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
-	if (ret)
-		return ret;
-
-	/*
-	 * 5211/5212 Specific
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		/*
-		 * Write initial RF gain settings
-		 * This should work for both 5111/5112
-		 */
-		ret = ath5k_hw_rfgain(ah, freq);
-		if (ret)
-			return ret;
-
-		mdelay(1);
-
-		/*
-		 * Write some more initial register settings
-		 */
-		if (ah->ah_version == AR5K_AR5212) {
-			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
-
-			if (channel->hw_value == CHANNEL_G)
-				if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
-					ath5k_hw_reg_write(ah, 0x00f80d80,
-								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
-					ath5k_hw_reg_write(ah, 0x00380140,
-								0x994c);
-				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
-					ath5k_hw_reg_write(ah, 0x00fc0ec0,
-								0x994c);
-				else /* 2425 */
-					ath5k_hw_reg_write(ah, 0x00fc0fc0,
-								0x994c);
-			else
-				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
-
-			/* Some bits are disabled here, we know nothing about
-			 * register 0xa228 yet, most of the times this ends up
-			 * with a value 0x9b5 -haven't seen any dump with
-			 * a different value- */
-			/* Got this from decompiling binary HAL */
-			data = ath5k_hw_reg_read(ah, 0xa228);
-			data &= 0xfffffdff;
-			ath5k_hw_reg_write(ah, data, 0xa228);
-
-			data = ath5k_hw_reg_read(ah, 0xa228);
-			data &= 0xfffe03ff;
-			ath5k_hw_reg_write(ah, data, 0xa228);
-			data = 0;
-
-			/* Just write 0x9b5 ? */
-			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
-			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
-			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
-			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
-		}
-
-		/* Fix for first revision of the RF5112 RF chipset */
-		if (ah->ah_radio >= AR5K_RF5112 &&
-				ah->ah_radio_5ghz_revision <
-				AR5K_SREV_RAD_5112A) {
-			ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
-					AR5K_PHY_CCKTXCTL);
-			if (channel->hw_value & CHANNEL_5GHZ)
-				data = 0xffb81020;
-			else
-				data = 0xffb80d20;
-			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
-			data = 0;
-		}
-
-		/*
-		 * Set TX power (FIXME)
-		 */
-		ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
-		if (ret)
-			return ret;
-
-		/* Write rate duration table only on AR5212 and if
-		 * virtual interface has already been brought up
-		 * XXX: rethink this after new mode changes to
-		 * mac80211 are integrated */
-		if (ah->ah_version == AR5K_AR5212 &&
-			ah->ah_sc->vif != NULL)
-			ath5k_hw_write_rate_duration(ah, mode);
-
-		/*
-		 * Write RF registers
-		 */
-		ret = ath5k_hw_rfregs(ah, channel, mode);
-		if (ret)
-			return ret;
-
-		/*
-		 * Configure additional registers
-		 */
-
-		/* Write OFDM timings on 5212*/
-		if (ah->ah_version == AR5K_AR5212 &&
-			channel->hw_value & CHANNEL_OFDM) {
-			ret = ath5k_hw_write_ofdm_timings(ah, channel);
-			if (ret)
-				return ret;
-		}
-
-		/*Enable/disable 802.11b mode on 5111
-		(enable 2111 frequency converter + CCK)*/
-		if (ah->ah_radio == AR5K_RF5111) {
-			if (mode == AR5K_MODE_11B)
-				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-			else
-				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
-				    AR5K_TXCFG_B_MODE);
-		}
-
-		/*
-		 * Set channel and calibrate the PHY
-		 */
-		ret = ath5k_hw_channel(ah, channel);
-		if (ret)
-			return ret;
-
-		/* Set antenna mode */
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
-			ah->ah_antenna[ee_mode][0], 0xfffffc06);
-
-		/*
-		 * In case a fixed antenna was set as default
-		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
-		 * registers.
-		 */
-		if (s_ant != 0){
-			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
-			else	/* 2 - Aux */
-				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
-		} else {
-			ant[0] = AR5K_ANT_FIXED_A;
-			ant[1] = AR5K_ANT_FIXED_B;
-		}
-
-		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
-			AR5K_PHY_ANT_SWITCH_TABLE_0);
-		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
-			AR5K_PHY_ANT_SWITCH_TABLE_1);
-
-		/* Commit values from EEPROM */
-		if (ah->ah_radio == AR5K_RF5111)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
-			    AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
-
-		ath5k_hw_reg_write(ah,
-			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
-			AR5K_PHY_NFTHRES);
-
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
-			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
-			0xffffc07f);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
-			(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
-			0xfffc0fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
-			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
-			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
-			0xffff0000);
-
-		ath5k_hw_reg_write(ah,
-			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
-			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
-			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
-
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
-			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
-			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
-		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
-
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-		    AR5K_PHY_IQ_CORR_ENABLE |
-		    (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
-		    ee->ee_q_cal[ee_mode]);
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
-				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
-				ee->ee_margin_tx_rx[ee_mode]);
-
-	} else {
-		mdelay(1);
-		/* Disable phy and wait */
-		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
-		mdelay(1);
-	}
-
-	/*
-	 * Restore saved values
-	 */
-	/*DCU/Antenna selection not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
-		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
-	}
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
-	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
-	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
-
-	/*
-	 * Misc
-	 */
-	/* XXX: add ah->aid once mac80211 gives this to us */
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
-
-	ath5k_hw_set_opmode(ah);
-	/*PISR/SISR Not available on 5210*/
-	if (ah->ah_version != AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
-		/* If we later allow tuning for this, store into sc structure */
-		data = AR5K_TUNE_RSSI_THRES |
-			AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
-		ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
-	}
-
-	/*
-	 * Set Rx/Tx DMA Configuration
-	 *
-	 * Set maximum DMA size (512) except for PCI-E cards since
-	 * it causes rx overruns and tx errors (tested on 5424 but since
-	 * rx overruns also occur on 5416/5418 with madwifi we set 128
-	 * for all PCI-E cards to be safe).
-	 *
-	 * In dumps this is 128 for allchips.
-	 *
-	 * XXX: need to check 5210 for this
-	 * TODO: Check out tx triger level, it's always 64 on dumps but I
-	 * guess we can tweak it and see how it goes ;-)
-	 */
-	dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
-	if (ah->ah_version != AR5K_AR5210) {
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-			AR5K_TXCFG_SDMAMR, dma_size);
-		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
-			AR5K_RXCFG_SDMAMW, dma_size);
-	}
-
-	/*
-	 * Enable the PHY and wait until completion
-	 */
-	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
-
-	/*
-	 * On 5211+ read activation -> rx delay
-	 * and use it.
-	 */
-	if (ah->ah_version != AR5K_AR5210) {
-		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
-			AR5K_PHY_RX_DELAY_M;
-		data = (channel->hw_value & CHANNEL_CCK) ?
-			((data << 2) / 22) : (data / 10);
-
-		udelay(100 + (2 * data));
-		data = 0;
-	} else {
-		mdelay(1);
-	}
-
-	/*
-	 * Perform ADC test (?)
-	 */
-	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
-	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
-	for (i = 0; i <= 20; i++) {
-		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
-			break;
-		udelay(200);
-	}
-	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
-	data = 0;
-
-	/*
-	 * Start automatic gain calibration
-	 *
-	 * During AGC calibration RX path is re-routed to
-	 * a signal detector so we don't receive anything.
-	 *
-	 * This method is used to calibrate some static offsets
-	 * used together with on-the fly I/Q calibration (the
-	 * one performed via ath5k_hw_phy_calibrate), that doesn't
-	 * interrupt rx path.
-	 *
-	 * If we are in a noisy environment AGC calibration may time
-	 * out.
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL);
-
-	/* At the same time start I/Q calibration for QAM constellation
-	 * -no need for CCK- */
-	ah->ah_calibration = false;
-	if (!(mode == AR5K_MODE_11B)) {
-		ah->ah_calibration = true;
-		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
-				AR5K_PHY_IQ_RUN);
-	}
-
-	/* Wait for gain calibration to finish (we check for I/Q calibration
-	 * during ath5k_phy_calibrate) */
-	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_CAL, 0, false)) {
-		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
-			channel->center_freq);
-		return -EAGAIN;
-	}
-
-	/*
-	 * Start noise floor calibration
-	 *
-	 * If we run NF calibration before AGC, it always times out.
-	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. I believe that's wrong because
-	 * during NF calibration, rx path is also routed to a detector, so if
-	 * it doesn't finish we won't have RX.
-	 *
-	 * XXX: Find an interval that's OK for all cards...
-	 */
-	ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
-	if (ret)
-		return ret;
-
-	/*
-	 * Reset queues and start beacon timers at the end of the reset routine
-	 */
-	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
-		/*No QCU on 5210*/
-		if (ah->ah_version != AR5K_AR5210)
-			AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
-
-		ret = ath5k_hw_reset_tx_queue(ah, i);
-		if (ret) {
-			ATH5K_ERR(ah->ah_sc,
-				"failed to reset TX queue #%d\n", i);
-			return ret;
-		}
-	}
-
-	/* Pre-enable interrupts on 5211/5212*/
-	if (ah->ah_version != AR5K_AR5210)
-		ath5k_hw_set_intr(ah, AR5K_INT_RX | AR5K_INT_TX |
-				AR5K_INT_FATAL);
-
-	/*
-	 * Set RF kill flags if supported by the device (read from the EEPROM)
-	 * Disable gpio_intr for now since it results system hang.
-	 * TODO: Handle this in ath5k_intr
-	 */
-#if 0
-	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
-		ath5k_hw_set_gpio_input(ah, 0);
-		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
-		if (ah->ah_gpio[0] == 0)
-			ath5k_hw_set_gpio_intr(ah, 0, 1);
-		else
-			ath5k_hw_set_gpio_intr(ah, 0, 0);
-	}
-#endif
-
-	/*
-	 * Set the 32MHz reference clock on 5212 phy clock sleep register
-	 *
-	 * TODO: Find out how to switch to external 32Khz clock to save power
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
-		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
-		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
-
-		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
-		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
-						0x00000f80 : 0x00001380 ;
-		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
-		data = 0;
-	}
-
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
-		ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
-		ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
-		if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413)
-			ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
-	}
-
-	/*
-	 * Disable beacons and reset the register
-	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
-			AR5K_BEACON_RESET_TSF);
-
-	return 0;
-}
-
-/*
- * Reset chipset
- */
-static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
-{
-	int ret;
-	u32 mask = val ? val : ~0U;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Read-and-clear RX Descriptor Pointer*/
-	ath5k_hw_reg_read(ah, AR5K_RXDP);
-
-	/*
-	 * Reset the device and wait until success
-	 */
-	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
-
-	/* Wait at least 128 PCI clocks */
-	udelay(15);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		val &= AR5K_RESET_CTL_CHIP;
-		mask &= AR5K_RESET_CTL_CHIP;
-	} else {
-		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
-		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
-	}
-
-	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
-
-	/*
-	 * Reset configuration register (for hw byte-swap). Note that this
-	 * is only set for big endian. We do the necessary magic in
-	 * AR5K_INIT_CFG.
-	 */
-	if ((val & AR5K_RESET_CTL_PCU) == 0)
-		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
-
-	return ret;
-}
-
-/*
- * Power management functions
- */
-
-/*
- * Sleep control
- */
-int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
-		bool set_chip, u16 sleep_duration)
-{
-	unsigned int i;
-	u32 staid, data;
-
-	ATH5K_TRACE(ah->ah_sc);
-	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
-
-	switch (mode) {
-	case AR5K_PM_AUTO:
-		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
-		/* fallthrough */
-	case AR5K_PM_NETWORK_SLEEP:
-		if (set_chip)
-			ath5k_hw_reg_write(ah,
-				AR5K_SLEEP_CTL_SLE_ALLOW |
-				sleep_duration,
-				AR5K_SLEEP_CTL);
-
-		staid |= AR5K_STA_ID1_PWR_SV;
-		break;
-
-	case AR5K_PM_FULL_SLEEP:
-		if (set_chip)
-			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
-				AR5K_SLEEP_CTL);
-
-		staid |= AR5K_STA_ID1_PWR_SV;
-		break;
-
-	case AR5K_PM_AWAKE:
-
-		staid &= ~AR5K_STA_ID1_PWR_SV;
-
-		if (!set_chip)
-			goto commit;
-
-		/* Preserve sleep duration */
-		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
-		if( data & 0xffc00000 ){
-			data = 0;
-		} else {
-			data = data & 0xfffcffff;
-		}
-
-		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
-		udelay(15);
-
-		for (i = 50; i > 0; i--) {
-			/* Check if the chip did wake up */
-			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
-					AR5K_PCICFG_SPWR_DN) == 0)
-				break;
-
-			/* Wait a bit and retry */
-			udelay(200);
-			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
-		}
-
-		/* Fail if the chip didn't wake up */
-		if (i <= 0)
-			return -EIO;
-
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-commit:
-	ah->ah_power_mode = mode;
-	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
-
-	return 0;
-}
-
-/***********************\
-  DMA Related Functions
-\***********************/
-
-/*
- * Receive functions
- */
-
-/*
- * Start DMA receive
- */
-void ath5k_hw_start_rx(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	ath5k_hw_reg_write(ah, AR5K_CR_RXE, AR5K_CR);
-	ath5k_hw_reg_read(ah, AR5K_CR);
-}
-
-/*
- * Stop DMA receive
- */
-int ath5k_hw_stop_rx_dma(struct ath5k_hw *ah)
-{
-	unsigned int i;
-
-	ATH5K_TRACE(ah->ah_sc);
-	ath5k_hw_reg_write(ah, AR5K_CR_RXD, AR5K_CR);
-
-	/*
-	 * It may take some time to disable the DMA receive unit
-	 */
-	for (i = 2000; i > 0 &&
-			(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_CR_RXE) != 0;
-			i--)
-		udelay(10);
-
-	return i ? 0 : -EBUSY;
-}
-
-/*
- * Get the address of the RX Descriptor
- */
-u32 ath5k_hw_get_rx_buf(struct ath5k_hw *ah)
-{
-	return ath5k_hw_reg_read(ah, AR5K_RXDP);
-}
-
-/*
- * Set the address of the RX Descriptor
- */
-void ath5k_hw_put_rx_buf(struct ath5k_hw *ah, u32 phys_addr)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*TODO:Shouldn't we check if RX is enabled first ?*/
-	ath5k_hw_reg_write(ah, phys_addr, AR5K_RXDP);
-}
-
-/*
- * Transmit functions
- */
-
-/*
- * Start DMA transmit for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_tx_start(struct ath5k_hw *ah, unsigned int queue)
-{
-	u32 tx_queue;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
-
-		/*
-		 * Set the queue by type on 5210
-		 */
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_queue |= AR5K_CR_TXE0 & ~AR5K_CR_TXD0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
-			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
-					AR5K_BSR);
-			break;
-		case AR5K_TX_QUEUE_CAB:
-			tx_queue |= AR5K_CR_TXE1 & ~AR5K_CR_TXD1;
-			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1FV | AR5K_BCR_TQ1V |
-				AR5K_BCR_BDMAE, AR5K_BSR);
-			break;
-		default:
-			return -EINVAL;
-		}
-		/* Start queue */
-		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
-		ath5k_hw_reg_read(ah, AR5K_CR);
-	} else {
-		/* Return if queue is disabled */
-		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXD, queue))
-			return -EIO;
-
-		/* Start queue */
-		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXE, queue);
-	}
-
-	return 0;
-}
-
-/*
- * Stop DMA transmit for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_stop_tx_dma(struct ath5k_hw *ah, unsigned int queue)
-{
-	unsigned int i = 100;
-	u32 tx_queue, pending;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		tx_queue = ath5k_hw_reg_read(ah, AR5K_CR);
-
-		/*
-		 * Set by queue type
-		 */
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_queue |= AR5K_CR_TXD0 & ~AR5K_CR_TXE0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			/* XXX Fix me... */
-			tx_queue |= AR5K_CR_TXD1 & ~AR5K_CR_TXD1;
-			ath5k_hw_reg_write(ah, 0, AR5K_BSR);
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		/* Stop queue */
-		ath5k_hw_reg_write(ah, tx_queue, AR5K_CR);
-		ath5k_hw_reg_read(ah, AR5K_CR);
-	} else {
-		/*
-		 * Schedule TX disable and wait until queue is empty
-		 */
-		AR5K_REG_WRITE_Q(ah, AR5K_QCU_TXD, queue);
-
-		/*Check for pending frames*/
-		do {
-			pending = ath5k_hw_reg_read(ah,
-				AR5K_QUEUE_STATUS(queue)) &
-				AR5K_QCU_STS_FRMPENDCNT;
-			udelay(100);
-		} while (--i && pending);
-
-		/* Clear register */
-		ath5k_hw_reg_write(ah, 0, AR5K_QCU_TXD);
-		if (pending)
-			return -EBUSY;
-	}
-
-	/* TODO: Check for success else return error */
-	return 0;
-}
-
-/*
- * Get the address of the TX Descriptor for a specific queue
- * (see also QCU/DCU functions)
- */
-u32 ath5k_hw_get_tx_buf(struct ath5k_hw *ah, unsigned int queue)
-{
-	u16 tx_reg;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/*
-	 * Get the transmit queue descriptor pointer from the selected queue
-	 */
-	/*5210 doesn't have QCU*/
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_reg = AR5K_NOQCU_TXDP0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			tx_reg = AR5K_NOQCU_TXDP1;
-			break;
-		default:
-			return 0xffffffff;
-		}
-	} else {
-		tx_reg = AR5K_QUEUE_TXDP(queue);
-	}
-
-	return ath5k_hw_reg_read(ah, tx_reg);
-}
-
-/*
- * Set the address of the TX Descriptor for a specific queue
- * (see also QCU/DCU functions)
- */
-int ath5k_hw_put_tx_buf(struct ath5k_hw *ah, unsigned int queue, u32 phys_addr)
-{
-	u16 tx_reg;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/*
-	 * Set the transmit queue descriptor pointer register by type
-	 * on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (ah->ah_txq[queue].tqi_type) {
-		case AR5K_TX_QUEUE_DATA:
-			tx_reg = AR5K_NOQCU_TXDP0;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			tx_reg = AR5K_NOQCU_TXDP1;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		/*
-		 * Set the transmit queue descriptor pointer for
-		 * the selected queue on QCU for 5211+
-		 * (this won't work if the queue is still active)
-		 */
-		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, queue))
-			return -EIO;
-
-		tx_reg = AR5K_QUEUE_TXDP(queue);
-	}
-
-	/* Set descriptor pointer */
-	ath5k_hw_reg_write(ah, phys_addr, tx_reg);
-
-	return 0;
-}
-
-/*
- * Update tx trigger level
- */
-int ath5k_hw_update_tx_triglevel(struct ath5k_hw *ah, bool increase)
-{
-	u32 trigger_level, imr;
-	int ret = -EIO;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Disable interrupts by setting the mask
-	 */
-	imr = ath5k_hw_set_intr(ah, ah->ah_imr & ~AR5K_INT_GLOBAL);
-
-	/*TODO: Boundary check on trigger_level*/
-	trigger_level = AR5K_REG_MS(ath5k_hw_reg_read(ah, AR5K_TXCFG),
-			AR5K_TXCFG_TXFULL);
-
-	if (!increase) {
-		if (--trigger_level < AR5K_TUNE_MIN_TX_FIFO_THRES)
-			goto done;
-	} else
-		trigger_level +=
-			((AR5K_TUNE_MAX_TX_FIFO_THRES - trigger_level) / 2);
-
-	/*
-	 * Update trigger level on success
-	 */
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, trigger_level, AR5K_TRIG_LVL);
-	else
-		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
-				AR5K_TXCFG_TXFULL, trigger_level);
-
-	ret = 0;
-
-done:
-	/*
-	 * Restore interrupt mask
-	 */
-	ath5k_hw_set_intr(ah, imr);
-
-	return ret;
-}
-
-/*
- * Interrupt handling
- */
-
-/*
- * Check if we have pending interrupts
- */
-bool ath5k_hw_is_intr_pending(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_reg_read(ah, AR5K_INTPEND);
-}
-
-/*
- * Get interrupt mask (ISR)
- */
-int ath5k_hw_get_isr(struct ath5k_hw *ah, enum ath5k_int *interrupt_mask)
-{
-	u32 data;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Read interrupt status from the Interrupt Status register
-	 * on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		data = ath5k_hw_reg_read(ah, AR5K_ISR);
-		if (unlikely(data == AR5K_INT_NOCARD)) {
-			*interrupt_mask = data;
-			return -ENODEV;
-		}
-	} else {
-		/*
-		 * Read interrupt status from the Read-And-Clear shadow register
-		 * Note: PISR/SISR Not available on 5210
-		 */
-		data = ath5k_hw_reg_read(ah, AR5K_RAC_PISR);
-	}
-
-	/*
-	 * Get abstract interrupt mask (driver-compatible)
-	 */
-	*interrupt_mask = (data & AR5K_INT_COMMON) & ah->ah_imr;
-
-	if (unlikely(data == AR5K_INT_NOCARD))
-		return -ENODEV;
-
-	if (data & (AR5K_ISR_RXOK | AR5K_ISR_RXERR))
-		*interrupt_mask |= AR5K_INT_RX;
-
-	if (data & (AR5K_ISR_TXOK | AR5K_ISR_TXERR
-		| AR5K_ISR_TXDESC | AR5K_ISR_TXEOL))
-		*interrupt_mask |= AR5K_INT_TX;
-
-	if (ah->ah_version != AR5K_AR5210) {
-		/*HIU = Host Interface Unit (PCI etc)*/
-		if (unlikely(data & (AR5K_ISR_HIUERR)))
-			*interrupt_mask |= AR5K_INT_FATAL;
-
-		/*Beacon Not Ready*/
-		if (unlikely(data & (AR5K_ISR_BNR)))
-			*interrupt_mask |= AR5K_INT_BNR;
-	}
-
-	/*
-	 * XXX: BMISS interrupts may occur after association.
-	 * I found this on 5210 code but it needs testing. If this is
-	 * true we should disable them before assoc and re-enable them
-	 * after a successfull assoc + some jiffies.
-	 */
-#if 0
-	interrupt_mask &= ~AR5K_INT_BMISS;
-#endif
-
-	/*
-	 * In case we didn't handle anything,
-	 * print the register value.
-	 */
-	if (unlikely(*interrupt_mask == 0 && net_ratelimit()))
-		ATH5K_PRINTF("0x%08x\n", data);
-
-	return 0;
-}
-
-/*
- * Set interrupt mask
- */
-enum ath5k_int ath5k_hw_set_intr(struct ath5k_hw *ah, enum ath5k_int new_mask)
-{
-	enum ath5k_int old_mask, int_mask;
-
-	/*
-	 * Disable card interrupts to prevent any race conditions
-	 * (they will be re-enabled afterwards).
-	 */
-	ath5k_hw_reg_write(ah, AR5K_IER_DISABLE, AR5K_IER);
-	ath5k_hw_reg_read(ah, AR5K_IER);
-
-	old_mask = ah->ah_imr;
-
-	/*
-	 * Add additional, chipset-dependent interrupt mask flags
-	 * and write them to the IMR (interrupt mask register).
-	 */
-	int_mask = new_mask & AR5K_INT_COMMON;
-
-	if (new_mask & AR5K_INT_RX)
-		int_mask |= AR5K_IMR_RXOK | AR5K_IMR_RXERR | AR5K_IMR_RXORN |
-			AR5K_IMR_RXDESC;
-
-	if (new_mask & AR5K_INT_TX)
-		int_mask |= AR5K_IMR_TXOK | AR5K_IMR_TXERR | AR5K_IMR_TXDESC |
-			AR5K_IMR_TXURN;
-
-	if (ah->ah_version != AR5K_AR5210) {
-		if (new_mask & AR5K_INT_FATAL) {
-			int_mask |= AR5K_IMR_HIUERR;
-			AR5K_REG_ENABLE_BITS(ah, AR5K_SIMR2, AR5K_SIMR2_MCABT |
-					AR5K_SIMR2_SSERR | AR5K_SIMR2_DPERR);
-		}
-	}
-
-	ath5k_hw_reg_write(ah, int_mask, AR5K_PIMR);
-
-	/* Store new interrupt mask */
-	ah->ah_imr = new_mask;
-
-	/* ..re-enable interrupts */
-	ath5k_hw_reg_write(ah, AR5K_IER_ENABLE, AR5K_IER);
-	ath5k_hw_reg_read(ah, AR5K_IER);
-
-	return old_mask;
-}
-
-
-/*************************\
-  EEPROM access functions
-\*************************/
-
-/*
- * Read from eeprom
- */
-static int ath5k_hw_eeprom_read(struct ath5k_hw *ah, u32 offset, u16 *data)
-{
-	u32 status, timeout;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/*
-	 * Initialize EEPROM access
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
-		(void)ath5k_hw_reg_read(ah, AR5K_EEPROM_BASE + (4 * offset));
-	} else {
-		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_READ);
-	}
-
-	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
-		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
-		if (status & AR5K_EEPROM_STAT_RDDONE) {
-			if (status & AR5K_EEPROM_STAT_RDERR)
-				return -EIO;
-			*data = (u16)(ath5k_hw_reg_read(ah, AR5K_EEPROM_DATA) &
-					0xffff);
-			return 0;
-		}
-		udelay(15);
-	}
-
-	return -ETIMEDOUT;
-}
-
-/*
- * Write to eeprom - currently disabled, use at your own risk
- */
-#if 0
-static int ath5k_hw_eeprom_write(struct ath5k_hw *ah, u32 offset, u16 data)
-{
-
-	u32 status, timeout;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Initialize eeprom access
-	 */
-
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_EEAE);
-	} else {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_RESET);
-	}
-
-	/*
-	 * Write data to data register
-	 */
-
-	if (ah->ah_version == AR5K_AR5210) {
-		ath5k_hw_reg_write(ah, data, AR5K_EEPROM_BASE + (4 * offset));
-	} else {
-		ath5k_hw_reg_write(ah, offset, AR5K_EEPROM_BASE);
-		ath5k_hw_reg_write(ah, data, AR5K_EEPROM_DATA);
-		AR5K_REG_ENABLE_BITS(ah, AR5K_EEPROM_CMD,
-				AR5K_EEPROM_CMD_WRITE);
-	}
-
-	/*
-	 * Check status
-	 */
-
-	for (timeout = AR5K_TUNE_REGISTER_TIMEOUT; timeout > 0; timeout--) {
-		status = ath5k_hw_reg_read(ah, AR5K_EEPROM_STATUS);
-		if (status & AR5K_EEPROM_STAT_WRDONE) {
-			if (status & AR5K_EEPROM_STAT_WRERR)
-				return EIO;
-			return 0;
-		}
-		udelay(15);
-	}
-
-	ATH5K_ERR(ah->ah_sc, "EEPROM Write is disabled!");
-	return -EIO;
-}
-#endif
-
-/*
- * Translate binary channel representation in EEPROM to frequency
- */
-static u16 ath5k_eeprom_bin2freq(struct ath5k_hw *ah, u16 bin, unsigned int mode)
-{
-	u16 val;
-
-	if (bin == AR5K_EEPROM_CHANNEL_DIS)
-		return bin;
-
-	if (mode == AR5K_EEPROM_MODE_11A) {
-		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
-			val = (5 * bin) + 4800;
-		else
-			val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
-				(bin * 10) + 5100;
-	} else {
-		if (ah->ah_ee_version > AR5K_EEPROM_VERSION_3_2)
-			val = bin + 2300;
-		else
-			val = bin + 2400;
-	}
-
-	return val;
-}
-
-/*
- * Read antenna infos from eeprom
- */
-static int ath5k_eeprom_read_ants(struct ath5k_hw *ah, u32 *offset,
-		unsigned int mode)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	u32 o = *offset;
-	u16 val;
-	int ret, i = 0;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_switch_settling[mode]	= (val >> 8) & 0x7f;
-	ee->ee_ant_tx_rx[mode]		= (val >> 2) & 0x3f;
-	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
-	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= val & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	= (val >> 10) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= (val >> 4) & 0x3f;
-	ee->ee_ant_control[mode][i]	= (val << 2) & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	|= (val >> 14) & 0x3;
-	ee->ee_ant_control[mode][i++]	= (val >> 8) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= (val >> 2) & 0x3f;
-	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
-	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
-	ee->ee_ant_control[mode][i++]	= val & 0x3f;
-
-	/* Get antenna modes */
-	ah->ah_antenna[mode][0] =
-	    (ee->ee_ant_control[mode][0] << 4) | 0x1;
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_A] =
-	     ee->ee_ant_control[mode][1] 	|
-	    (ee->ee_ant_control[mode][2] << 6) 	|
-	    (ee->ee_ant_control[mode][3] << 12) |
-	    (ee->ee_ant_control[mode][4] << 18) |
-	    (ee->ee_ant_control[mode][5] << 24);
-	ah->ah_antenna[mode][AR5K_ANT_FIXED_B] =
-	     ee->ee_ant_control[mode][6] 	|
-	    (ee->ee_ant_control[mode][7] << 6) 	|
-	    (ee->ee_ant_control[mode][8] << 12) |
-	    (ee->ee_ant_control[mode][9] << 18) |
-	    (ee->ee_ant_control[mode][10] << 24);
-
-	/* return new offset */
-	*offset = o;
-
-	return 0;
-}
-
-/*
- * Read supported modes from eeprom
- */
-static int ath5k_eeprom_read_modes(struct ath5k_hw *ah, u32 *offset,
-		unsigned int mode)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	u32 o = *offset;
-	u16 val;
-	int ret;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_tx_end2xlna_enable[mode]	= (val >> 8) & 0xff;
-	ee->ee_thr_62[mode]		= val & 0xff;
-
-	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
-		ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_tx_end2xpa_disable[mode]	= (val >> 8) & 0xff;
-	ee->ee_tx_frm2xpa_enable[mode]	= val & 0xff;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_pga_desired_size[mode]	= (val >> 8) & 0xff;
-
-	if ((val & 0xff) & 0x80)
-		ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
-	else
-		ee->ee_noise_floor_thr[mode] = val & 0xff;
-
-	if (ah->ah_ee_version <= AR5K_EEPROM_VERSION_3_2)
-		ee->ee_noise_floor_thr[mode] =
-		    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
-
-	AR5K_EEPROM_READ(o++, val);
-	ee->ee_xlna_gain[mode]		= (val >> 5) & 0xff;
-	ee->ee_x_gain[mode]		= (val >> 1) & 0xf;
-	ee->ee_xpd[mode]		= val & 0x1;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0)
-		ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_3_3) {
-		AR5K_EEPROM_READ(o++, val);
-		ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
-
-		if (mode == AR5K_EEPROM_MODE_11A)
-			ee->ee_xr_power[mode] = val & 0x3f;
-		else {
-			ee->ee_ob[mode][0] = val & 0x7;
-			ee->ee_db[mode][0] = (val >> 3) & 0x7;
-		}
-	}
-
-	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_4) {
-		ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
-		ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
-	} else {
-		ee->ee_i_gain[mode] = (val >> 13) & 0x7;
-
-		AR5K_EEPROM_READ(o++, val);
-		ee->ee_i_gain[mode] |= (val << 3) & 0x38;
-
-		if (mode == AR5K_EEPROM_MODE_11G)
-			ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
-	}
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0 &&
-			mode == AR5K_EEPROM_MODE_11A) {
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-	}
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_6 &&
-	    mode == AR5K_EEPROM_MODE_11G)
-		ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
-
-	/* return new offset */
-	*offset = o;
-
-	return 0;
-}
-
-/*
- * Initialize eeprom & capabilities structs
- */
-static int ath5k_eeprom_init(struct ath5k_hw *ah)
-{
-	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-	unsigned int mode, i;
-	int ret;
-	u32 offset;
-	u16 val;
-
-	/* Initial TX thermal adjustment values */
-	ee->ee_tx_clip = 4;
-	ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
-	ee->ee_gain_select = 1;
-
-	/*
-	 * Read values from EEPROM and store them in the capability structure
-	 */
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MAGIC, ee_magic);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_PROTECT, ee_protect);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_REG_DOMAIN, ee_regdomain);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_VERSION, ee_version);
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_HDR, ee_header);
-
-	/* Return if we have an old EEPROM */
-	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_0)
-		return 0;
-
-#ifdef notyet
-	/*
-	 * Validate the checksum of the EEPROM date. There are some
-	 * devices with invalid EEPROMs.
-	 */
-	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
-		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
-		cksum ^= val;
-	}
-	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
-		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
-		return -EIO;
-	}
-#endif
-
-	AR5K_EEPROM_READ_HDR(AR5K_EEPROM_ANT_GAIN(ah->ah_ee_version),
-	    ee_ant_gain);
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
-		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC0, ee_misc0);
-		AR5K_EEPROM_READ_HDR(AR5K_EEPROM_MISC1, ee_misc1);
-	}
-
-	if (ah->ah_ee_version < AR5K_EEPROM_VERSION_3_3) {
-		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
-		ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
-		ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
-
-		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
-		ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
-		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
-	}
-
-	/*
-	 * Get conformance test limit values
-	 */
-	offset = AR5K_EEPROM_CTL(ah->ah_ee_version);
-	ee->ee_ctls = AR5K_EEPROM_N_CTLS(ah->ah_ee_version);
-
-	for (i = 0; i < ee->ee_ctls; i++) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_ctl[i] = (val >> 8) & 0xff;
-		ee->ee_ctl[i + 1] = val & 0xff;
-	}
-
-	/*
-	 * Get values for 802.11a (5GHz)
-	 */
-	mode = AR5K_EEPROM_MODE_11A;
-
-	ee->ee_turbo_max_power[mode] =
-			AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
-
-	offset = AR5K_EEPROM_MODES_11A(ah->ah_ee_version);
-
-	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
-	ee->ee_ob[mode][3]		= (val >> 5) & 0x7;
-	ee->ee_db[mode][3]		= (val >> 2) & 0x7;
-	ee->ee_ob[mode][2]		= (val << 1) & 0x7;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_ob[mode][2]		|= (val >> 15) & 0x1;
-	ee->ee_db[mode][2]		= (val >> 12) & 0x7;
-	ee->ee_ob[mode][1]		= (val >> 9) & 0x7;
-	ee->ee_db[mode][1]		= (val >> 6) & 0x7;
-	ee->ee_ob[mode][0]		= (val >> 3) & 0x7;
-	ee->ee_db[mode][0]		= val & 0x7;
-
-	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_margin_tx_rx[mode] = val & 0x3f;
-	}
-
-	/*
-	 * Get values for 802.11b (2.4GHz)
-	 */
-	mode = AR5K_EEPROM_MODE_11B;
-	offset = AR5K_EEPROM_MODES_11B(ah->ah_ee_version);
-
-	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
-	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
-	ee->ee_db[mode][1]		= val & 0x7;
-
-	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][0] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-		ee->ee_cal_pier[mode][1] =
-			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][2] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-	}
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-		ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-
-	/*
-	 * Get values for 802.11g (2.4GHz)
-	 */
-	mode = AR5K_EEPROM_MODE_11G;
-	offset = AR5K_EEPROM_MODES_11G(ah->ah_ee_version);
-
-	ret = ath5k_eeprom_read_ants(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	AR5K_EEPROM_READ(offset++, val);
-	ee->ee_adc_desired_size[mode]	= (s8)((val >> 8) & 0xff);
-	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
-	ee->ee_db[mode][1]		= val & 0x7;
-
-	ret = ath5k_eeprom_read_modes(ah, &offset, mode);
-	if (ret)
-		return ret;
-
-	if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_0) {
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][0] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-		ee->ee_cal_pier[mode][1] =
-			ath5k_eeprom_bin2freq(ah, (val >> 8) & 0xff, mode);
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_turbo_max_power[mode] = val & 0x7f;
-		ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_cal_pier[mode][2] =
-			ath5k_eeprom_bin2freq(ah, val & 0xff, mode);
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
-			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
-
-		AR5K_EEPROM_READ(offset++, val);
-		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
-		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
-
-		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_2) {
-			AR5K_EEPROM_READ(offset++, val);
-			ee->ee_cck_ofdm_gain_delta = val & 0xff;
-		}
-	}
-
-	/*
-	 * Read 5GHz EEPROM channels
-	 */
-
-	return 0;
-}
-
-/*
- * Read the MAC address from eeprom
- */
-static int ath5k_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac)
-{
-	u8 mac_d[ETH_ALEN];
-	u32 total, offset;
-	u16 data;
-	int octet, ret;
-
-	memset(mac, 0, ETH_ALEN);
-	memset(mac_d, 0, ETH_ALEN);
-
-	ret = ath5k_hw_eeprom_read(ah, 0x20, &data);
-	if (ret)
-		return ret;
-
-	for (offset = 0x1f, octet = 0, total = 0; offset >= 0x1d; offset--) {
-		ret = ath5k_hw_eeprom_read(ah, offset, &data);
-		if (ret)
-			return ret;
-
-		total += data;
-		mac_d[octet + 1] = data & 0xff;
-		mac_d[octet] = data >> 8;
-		octet += 2;
-	}
-
-	memcpy(mac, mac_d, ETH_ALEN);
-
-	if (!total || total == 3 * 0xffff)
-		return -EINVAL;
-
-	return 0;
-}
-
-/*
- * Fill the capabilities struct
- */
-static int ath5k_hw_get_capabilities(struct ath5k_hw *ah)
-{
-	u16 ee_header;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/* Capabilities stored in the EEPROM */
-	ee_header = ah->ah_capabilities.cap_eeprom.ee_header;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		/*
-		 * Set radio capabilities
-		 * (The AR5110 only supports the middle 5GHz band)
-		 */
-		ah->ah_capabilities.cap_range.range_5ghz_min = 5120;
-		ah->ah_capabilities.cap_range.range_5ghz_max = 5430;
-		ah->ah_capabilities.cap_range.range_2ghz_min = 0;
-		ah->ah_capabilities.cap_range.range_2ghz_max = 0;
-
-		/* Set supported modes */
-		__set_bit(AR5K_MODE_11A, ah->ah_capabilities.cap_mode);
-		__set_bit(AR5K_MODE_11A_TURBO, ah->ah_capabilities.cap_mode);
-	} else {
-		/*
-		 * XXX The tranceiver supports frequencies from 4920 to 6100GHz
-		 * XXX and from 2312 to 2732GHz. There are problems with the
-		 * XXX current ieee80211 implementation because the IEEE
-		 * XXX channel mapping does not support negative channel
-		 * XXX numbers (2312MHz is channel -19). Of course, this
-		 * XXX doesn't matter because these channels are out of range
-		 * XXX but some regulation domains like MKK (Japan) will
-		 * XXX support frequencies somewhere around 4.8GHz.
-		 */
-
-		/*
-		 * Set radio capabilities
-		 */
-
-		if (AR5K_EEPROM_HDR_11A(ee_header)) {
-			ah->ah_capabilities.cap_range.range_5ghz_min = 5005; /* 4920 */
-			ah->ah_capabilities.cap_range.range_5ghz_max = 6100;
-
-			/* Set supported modes */
-			__set_bit(AR5K_MODE_11A,
-					ah->ah_capabilities.cap_mode);
-			__set_bit(AR5K_MODE_11A_TURBO,
-					ah->ah_capabilities.cap_mode);
-			if (ah->ah_version == AR5K_AR5212)
-				__set_bit(AR5K_MODE_11G_TURBO,
-						ah->ah_capabilities.cap_mode);
-		}
-
-		/* Enable  802.11b if a 2GHz capable radio (2111/5112) is
-		 * connected */
-		if (AR5K_EEPROM_HDR_11B(ee_header) ||
-				AR5K_EEPROM_HDR_11G(ee_header)) {
-			ah->ah_capabilities.cap_range.range_2ghz_min = 2412; /* 2312 */
-			ah->ah_capabilities.cap_range.range_2ghz_max = 2732;
-
-			if (AR5K_EEPROM_HDR_11B(ee_header))
-				__set_bit(AR5K_MODE_11B,
-						ah->ah_capabilities.cap_mode);
-
-			if (AR5K_EEPROM_HDR_11G(ee_header))
-				__set_bit(AR5K_MODE_11G,
-						ah->ah_capabilities.cap_mode);
-		}
-	}
-
-	/* GPIO */
-	ah->ah_gpio_npins = AR5K_NUM_GPIO;
-
-	/* Set number of supported TX queues */
-	if (ah->ah_version == AR5K_AR5210)
-		ah->ah_capabilities.cap_queues.q_tx_num =
-			AR5K_NUM_TX_QUEUES_NOQCU;
-	else
-		ah->ah_capabilities.cap_queues.q_tx_num = AR5K_NUM_TX_QUEUES;
-
-	return 0;
-}
-
-/*********************************\
-  Protocol Control Unit Functions
-\*********************************/
-
-/*
- * Set Operation mode
- */
-int ath5k_hw_set_opmode(struct ath5k_hw *ah)
-{
-	u32 pcu_reg, beacon_reg, low_id, high_id;
-
-	pcu_reg = 0;
-	beacon_reg = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	switch (ah->ah_op_mode) {
-	case IEEE80211_IF_TYPE_IBSS:
-		pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		beacon_reg |= AR5K_BCR_ADHOC;
-		break;
-
-	case IEEE80211_IF_TYPE_AP:
-	case IEEE80211_IF_TYPE_MESH_POINT:
-		pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		beacon_reg |= AR5K_BCR_AP;
-		break;
-
-	case IEEE80211_IF_TYPE_STA:
-		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_PWR_SV : 0);
-	case IEEE80211_IF_TYPE_MNTR:
-		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
-			(ah->ah_version == AR5K_AR5210 ?
-				AR5K_STA_ID1_NO_PSPOLL : 0);
-		break;
-
-	default:
-		return -EINVAL;
-	}
-
-	/*
-	 * Set PCU registers
-	 */
-	low_id = AR5K_LOW_ID(ah->ah_sta_id);
-	high_id = AR5K_HIGH_ID(ah->ah_sta_id);
-	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
-
-	/*
-	 * Set Beacon Control Register on 5210
-	 */
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
-
-	return 0;
-}
-
-/*
- * BSSID Functions
- */
-
-/*
- * Get station id
- */
-void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	memcpy(mac, ah->ah_sta_id, ETH_ALEN);
-}
-
-/*
- * Set station id
- */
-int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
-{
-	u32 low_id, high_id;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/* Set new station ID */
-	memcpy(ah->ah_sta_id, mac, ETH_ALEN);
-
-	low_id = AR5K_LOW_ID(mac);
-	high_id = AR5K_HIGH_ID(mac);
-
-	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
-
-	return 0;
-}
-
-/*
- * Set BSSID
- */
-void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
-{
-	u32 low_id, high_id;
-	u16 tim_offset = 0;
-
-	/*
-	 * Set simple BSSID mask on 5212
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
-	}
-
-	/*
-	 * Set BSSID which triggers the "SME Join" operation
-	 */
-	low_id = AR5K_LOW_ID(bssid);
-	high_id = AR5K_HIGH_ID(bssid);
-	ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
-	ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
-				AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
-
-	if (assoc_id == 0) {
-		ath5k_hw_disable_pspoll(ah);
-		return;
-	}
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
-			tim_offset ? tim_offset + 4 : 0);
-
-	ath5k_hw_enable_pspoll(ah, NULL, 0);
-}
-/**
- * ath5k_hw_set_bssid_mask - set common bits we should listen to
- *
- * The bssid_mask is a utility used by AR5212 hardware to inform the hardware
- * which bits of the interface's MAC address should be looked at when trying
- * to decide which packets to ACK. In station mode every bit matters. In AP
- * mode with a single BSS every bit matters as well. In AP mode with
- * multiple BSSes not every bit matters.
- *
- * @ah: the &struct ath5k_hw
- * @mask: the bssid_mask, a u8 array of size ETH_ALEN
- *
- * Note that this is a simple filter and *does* not filter out all
- * relevant frames. Some non-relevant frames will get through, probability
- * jocks are welcomed to compute.
- *
- * When handling multiple BSSes (or VAPs) you can get the BSSID mask by
- * computing the set of:
- *
- *     ~ ( MAC XOR BSSID )
- *
- * When you do this you are essentially computing the common bits. Later it
- * is assumed the harware will "and" (&) the BSSID mask with the MAC address
- * to obtain the relevant bits which should match on the destination frame.
- *
- * Simple example: on your card you have have two BSSes you have created with
- * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
- * There is another BSSID-03 but you are not part of it. For simplicity's sake,
- * assuming only 4 bits for a mac address and for BSSIDs you can then have:
- *
- *                  \
- * MAC:                0001 |
- * BSSID-01:   0100 | --> Belongs to us
- * BSSID-02:   1001 |
- *                  /
- * -------------------
- * BSSID-03:   0110  | --> External
- * -------------------
- *
- * Our bssid_mask would then be:
- *
- *             On loop iteration for BSSID-01:
- *             ~(0001 ^ 0100)  -> ~(0101)
- *                             ->   1010
- *             bssid_mask      =    1010
- *
- *             On loop iteration for BSSID-02:
- *             bssid_mask &= ~(0001   ^   1001)
- *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
- *             bssid_mask =   (1010)  & ~(1001)
- *             bssid_mask =   (1010)  &  (0110)
- *             bssid_mask =   0010
- *
- * A bssid_mask of 0010 means "only pay attention to the second least
- * significant bit". This is because its the only bit common
- * amongst the MAC and all BSSIDs we support. To findout what the real
- * common bit is we can simply "&" the bssid_mask now with any BSSID we have
- * or our MAC address (we assume the hardware uses the MAC address).
- *
- * Now, suppose there's an incoming frame for BSSID-03:
- *
- * IFRAME-01:  0110
- *
- * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
- * hardware to only look at the second least significant bit and the
- * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
- * as 1, which does not match 0.
- *
- * So with IFRAME-01 we *assume* the hardware will do:
- *
- *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
- *  --> allow = (0010) == 0000 ? 1 : 0;
- *  --> allow = 0
- *
- *  Lets now test a frame that should work:
- *
- * IFRAME-02:  0001 (we should allow)
- *
- *     allow = (0001 & 1010) == 1010
- *
- *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
- *  --> allow = (0010) == (0010)
- *  --> allow = 1
- *
- * Other examples:
- *
- * IFRAME-03:  0100 --> allowed
- * IFRAME-04:  1001 --> allowed
- * IFRAME-05:  1101 --> allowed but its not for us!!!
- *
- */
-int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
-{
-	u32 low_id, high_id;
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (ah->ah_version == AR5K_AR5212) {
-		low_id = AR5K_LOW_ID(mask);
-		high_id = AR5K_HIGH_ID(mask);
-
-		ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
-
-		return 0;
-	}
-
-	return -EIO;
-}
-
-/*
- * Receive start/stop functions
- */
-
-/*
- * Start receive on PCU
- */
-void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-
-	/* TODO: ANI Support */
-}
-
-/*
- * Stop receive on PCU
- */
-void ath5k_hw_stop_pcu_recv(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
-
-	/* TODO: ANI Support */
-}
-
-/*
- * RX Filter functions
- */
-
-/*
- * Set multicast filter
- */
-void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	/* Set the multicat filter */
-	ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
-	ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
-}
-
-/*
- * Set multicast filter by index
- */
-int ath5k_hw_set_mcast_filterindex(struct ath5k_hw *ah, u32 index)
-{
-
-	ATH5K_TRACE(ah->ah_sc);
-	if (index >= 64)
-		return -EINVAL;
-	else if (index >= 32)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
-				(1 << (index - 32)));
-	else
-		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
-
-	return 0;
-}
-
-/*
- * Clear Multicast filter by index
- */
-int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
-{
-
-	ATH5K_TRACE(ah->ah_sc);
-	if (index >= 64)
-		return -EINVAL;
-	else if (index >= 32)
-		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
-				(1 << (index - 32)));
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
-
-	return 0;
-}
-
-/*
- * Get current rx filter
- */
-u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
-{
-	u32 data, filter = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-	filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
-
-	/*Radar detection for 5212*/
-	if (ah->ah_version == AR5K_AR5212) {
-		data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
-
-		if (data & AR5K_PHY_ERR_FIL_RADAR)
-			filter |= AR5K_RX_FILTER_RADARERR;
-		if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
-			filter |= AR5K_RX_FILTER_PHYERR;
-	}
-
-	return filter;
-}
-
-/*
- * Set rx filter
- */
-void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
-{
-	u32 data = 0;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Set PHY error filter register on 5212*/
-	if (ah->ah_version == AR5K_AR5212) {
-		if (filter & AR5K_RX_FILTER_RADARERR)
-			data |= AR5K_PHY_ERR_FIL_RADAR;
-		if (filter & AR5K_RX_FILTER_PHYERR)
-			data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
-	}
-
-	/*
-	 * The AR5210 uses promiscous mode to detect radar activity
-	 */
-	if (ah->ah_version == AR5K_AR5210 &&
-			(filter & AR5K_RX_FILTER_RADARERR)) {
-		filter &= ~AR5K_RX_FILTER_RADARERR;
-		filter |= AR5K_RX_FILTER_PROM;
-	}
-
-	/*Zero length DMA*/
-	if (data)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
-
-	/*Write RX Filter register*/
-	ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
-
-	/*Write PHY error filter register on 5212*/
-	if (ah->ah_version == AR5K_AR5212)
-		ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
-
-}
-
-/*
- * Beacon related functions
- */
-
-/*
- * Get a 32bit TSF
- */
-u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
-}
-
-/*
- * Get the full 64bit TSF
- */
-u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
-{
-	u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
-	ATH5K_TRACE(ah->ah_sc);
-
-	return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
-}
-
-/*
- * Force a TSF reset
- */
-void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
-}
-
-/*
- * Initialize beacon timers
- */
-void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
-{
-	u32 timer1, timer2, timer3;
-
-	ATH5K_TRACE(ah->ah_sc);
-	/*
-	 * Set the additional timers by mode
-	 */
-	switch (ah->ah_op_mode) {
-	case IEEE80211_IF_TYPE_STA:
-		if (ah->ah_version == AR5K_AR5210) {
-			timer1 = 0xffffffff;
-			timer2 = 0xffffffff;
-		} else {
-			timer1 = 0x0000ffff;
-			timer2 = 0x0007ffff;
-		}
-		break;
-
-	default:
-		timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
-		timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
-	}
-
-	timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
-
-	/*
-	 * Set the beacon register and enable all timers.
-	 * (next beacon, DMA beacon, software beacon, ATIM window time)
-	 */
-	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
-	ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
-	ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
-	ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
-
-	ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
-			AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
-		AR5K_BEACON);
-}
-
-#if 0
-/*
- * Set beacon timers
- */
-int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
-		const struct ath5k_beacon_state *state)
-{
-	u32 cfp_period, next_cfp, dtim, interval, next_beacon;
-
-	/*
-	 * TODO: should be changed through *state
-	 * review struct ath5k_beacon_state struct
-	 *
-	 * XXX: These are used for cfp period bellow, are they
-	 * ok ? Is it O.K. for tsf here to be 0 or should we use
-	 * get_tsf ?
-	 */
-	u32 dtim_count = 0; /* XXX */
-	u32 cfp_count = 0; /* XXX */
-	u32 tsf = 0; /* XXX */
-
-	ATH5K_TRACE(ah->ah_sc);
-	/* Return on an invalid beacon state */
-	if (state->bs_interval < 1)
-		return -EINVAL;
-
-	interval = state->bs_interval;
-	dtim = state->bs_dtim_period;
-
-	/*
-	 * PCF support?
-	 */
-	if (state->bs_cfp_period > 0) {
-		/*
-		 * Enable PCF mode and set the CFP
-		 * (Contention Free Period) and timer registers
-		 */
-		cfp_period = state->bs_cfp_period * state->bs_dtim_period *
-			state->bs_interval;
-		next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
-			state->bs_interval;
-
-		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
-				AR5K_STA_ID1_DEFAULT_ANTENNA |
-				AR5K_STA_ID1_PCF);
-		ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
-		ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
-				AR5K_CFP_DUR);
-		ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
-						next_cfp)) << 3, AR5K_TIMER2);
-	} else {
-		/* Disable PCF mode */
-		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
-				AR5K_STA_ID1_DEFAULT_ANTENNA |
-				AR5K_STA_ID1_PCF);
-	}
-
-	/*
-	 * Enable the beacon timer register
-	 */
-	ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
-
-	/*
-	 * Start the beacon timers
-	 */
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &~
-		(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
-		AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
-		AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
-		AR5K_BEACON_PERIOD), AR5K_BEACON);
-
-	/*
-	 * Write new beacon miss threshold, if it appears to be valid
-	 * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
-	 * and return if its not in range. We can test this by reading value and
-	 * setting value to a largest value and seeing which values register.
-	 */
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
-			state->bs_bmiss_threshold);
-
-	/*
-	 * Set sleep control register
-	 * XXX: Didn't find this in 5210 code but since this register
-	 * exists also in ar5k's 5210 headers i leave it as common code.
-	 */
-	AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
-			(state->bs_sleep_duration - 3) << 3);
-
-	/*
-	 * Set enhanced sleep registers on 5212
-	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		if (state->bs_sleep_duration > state->bs_interval &&
-				roundup(state->bs_sleep_duration, interval) ==
-				state->bs_sleep_duration)
-			interval = state->bs_sleep_duration;
-
-		if (state->bs_sleep_duration > dtim && (dtim == 0 ||
-				roundup(state->bs_sleep_duration, dtim) ==
-				state->bs_sleep_duration))
-			dtim = state->bs_sleep_duration;
-
-		if (interval > dtim)
-			return -EINVAL;
-
-		next_beacon = interval == dtim ? state->bs_next_dtim :
-			state->bs_next_beacon;
-
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
-			AR5K_SLEEP0_NEXT_DTIM) |
-			AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
-			AR5K_SLEEP0_ENH_SLEEP_EN |
-			AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
-
-		ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
-			AR5K_SLEEP1_NEXT_TIM) |
-			AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
-
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
-			AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
-	}
-
-	return 0;
-}
-
-/*
- * Reset beacon timers
- */
-void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	/*
-	 * Disable beacon timer
-	 */
-	ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
-
-	/*
-	 * Disable some beacon register values
-	 */
-	AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
-			AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
-	ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
-}
-
-/*
- * Wait for beacon queue to finish
- */
-int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
-{
-	unsigned int i;
-	int ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* 5210 doesn't have QCU*/
-	if (ah->ah_version == AR5K_AR5210) {
-		/*
-		 * Wait for beaconn queue to finish by checking
-		 * Control Register and Beacon Status Register.
-		 */
-		for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
-			if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
-					||
-			    !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
-				break;
-			udelay(10);
-		}
-
-		/* Timeout... */
-		if (i <= 0) {
-			/*
-			 * Re-schedule the beacon queue
-			 */
-			ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
-			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
-					AR5K_BCR);
-
-			return -EIO;
-		}
-		ret = 0;
-	} else {
-	/*5211/5212*/
-		ret = ath5k_hw_register_timeout(ah,
-			AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
-			AR5K_QCU_STS_FRMPENDCNT, 0, false);
-
-		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
-			return -EIO;
-	}
-
-	return ret;
-}
-#endif
-
-/*
- * Update mib counters (statistics)
- */
-void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
-		struct ieee80211_low_level_stats  *stats)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* Read-And-Clear */
-	stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
-	stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
-	stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
-	stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
-
-	/* XXX: Should we use this to track beacon count ?
-	 * -we read it anyway to clear the register */
-	ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
-
-	/* Reset profile count registers on 5212*/
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
-		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
-	}
-}
-
-/** ath5k_hw_set_ack_bitrate - set bitrate for ACKs
- *
- * @ah: the &struct ath5k_hw
- * @high: determines if to use low bit rate or now
- */
-void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
-{
-	if (ah->ah_version != AR5K_AR5212)
-		return;
-	else {
-		u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
-		if (high)
-			AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
-		else
-			AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
-	}
-}
-
-
-/*
- * ACK/CTS Timeouts
- */
-
-/*
- * Set ACK timeout on PCU
- */
-int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
-			ah->ah_turbo) <= timeout)
-		return -EINVAL;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
-		ath5k_hw_htoclock(timeout, ah->ah_turbo));
-
-	return 0;
-}
-
-/*
- * Read the ACK timeout from PCU
- */
-unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
-			AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
-}
-
-/*
- * Set CTS timeout on PCU
- */
-int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
-			ah->ah_turbo) <= timeout)
-		return -EINVAL;
-
-	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
-			ath5k_hw_htoclock(timeout, ah->ah_turbo));
-
-	return 0;
-}
-
-/*
- * Read CTS timeout from PCU
- */
-unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
-			AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
-}
-
-/*
- * Key table (WEP) functions
- */
-
-int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
-{
-	unsigned int i;
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
-	for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
-		ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
-
-	/*
-	 * Set NULL encryption on AR5212+
-	 *
-	 * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
-	 *       AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
-	 *
-	 * Note2: Windows driver (ndiswrapper) sets this to
-	 *        0x00000714 instead of 0x00000007
-	 */
-	if (ah->ah_version > AR5K_AR5211)
-		ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
-				AR5K_KEYTABLE_TYPE(entry));
-
-	return 0;
-}
-
-int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
-	/* Check the validation flag at the end of the entry */
-	return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
-		AR5K_KEYTABLE_VALID;
-}
-
-int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
-		const struct ieee80211_key_conf *key, const u8 *mac)
-{
-	unsigned int i;
-	__le32 key_v[5] = {};
-	u32 keytype;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/* key->keylen comes in from mac80211 in bytes */
-
-	if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
-		return -EOPNOTSUPP;
-
-	switch (key->keylen) {
-	/* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit */
-	case 40 / 8:
-		memcpy(&key_v[0], key->key, 5);
-		keytype = AR5K_KEYTABLE_TYPE_40;
-		break;
-
-	/* WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit */
-	case 104 / 8:
-		memcpy(&key_v[0], &key->key[0], 6);
-		memcpy(&key_v[2], &key->key[6], 6);
-		memcpy(&key_v[4], &key->key[12], 1);
-		keytype = AR5K_KEYTABLE_TYPE_104;
-		break;
-	/* WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit */
-	case 128 / 8:
-		memcpy(&key_v[0], &key->key[0], 6);
-		memcpy(&key_v[2], &key->key[6], 6);
-		memcpy(&key_v[4], &key->key[12], 4);
-		keytype = AR5K_KEYTABLE_TYPE_128;
-		break;
-
-	default:
-		return -EINVAL; /* shouldn't happen */
-	}
-
-	for (i = 0; i < ARRAY_SIZE(key_v); i++)
-		ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
-				AR5K_KEYTABLE_OFF(entry, i));
-
-	ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
-
-	return ath5k_hw_set_key_lladdr(ah, entry, mac);
-}
-
-int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
-{
-	u32 low_id, high_id;
-
-	ATH5K_TRACE(ah->ah_sc);
-	 /* Invalid entry (key table overflow) */
-	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
-
-	/* MAC may be NULL if it's a broadcast key. In this case no need to
-	 * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
-	if (unlikely(mac == NULL)) {
-		low_id = 0xffffffff;
-		high_id = 0xffff | AR5K_KEYTABLE_VALID;
-	} else {
-		low_id = AR5K_LOW_ID(mac);
-		high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
-	}
-
-	ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
-	ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
-
-	return 0;
-}
-
-
-/********************************************\
-Queue Control Unit, DFS Control Unit Functions
-\********************************************/
-
-/*
- * Initialize a transmit queue
- */
-int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
-		struct ath5k_txq_info *queue_info)
-{
-	unsigned int queue;
-	int ret;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*
-	 * Get queue by type
-	 */
-	/*5210 only has 2 queues*/
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (queue_type) {
-		case AR5K_TX_QUEUE_DATA:
-			queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-		case AR5K_TX_QUEUE_CAB:
-			queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
-			break;
-		default:
-			return -EINVAL;
-		}
-	} else {
-		switch (queue_type) {
-		case AR5K_TX_QUEUE_DATA:
-			for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
-				ah->ah_txq[queue].tqi_type !=
-				AR5K_TX_QUEUE_INACTIVE; queue++) {
-
-				if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
-					return -EINVAL;
-			}
-			break;
-		case AR5K_TX_QUEUE_UAPSD:
-			queue = AR5K_TX_QUEUE_ID_UAPSD;
-			break;
-		case AR5K_TX_QUEUE_BEACON:
-			queue = AR5K_TX_QUEUE_ID_BEACON;
-			break;
-		case AR5K_TX_QUEUE_CAB:
-			queue = AR5K_TX_QUEUE_ID_CAB;
-			break;
-		case AR5K_TX_QUEUE_XR_DATA:
-			if (ah->ah_version != AR5K_AR5212)
-				ATH5K_ERR(ah->ah_sc,
-					"XR data queues only supported in"
-					" 5212!\n");
-			queue = AR5K_TX_QUEUE_ID_XR_DATA;
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
-
-	/*
-	 * Setup internal queue structure
-	 */
-	memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
-	ah->ah_txq[queue].tqi_type = queue_type;
-
-	if (queue_info != NULL) {
-		queue_info->tqi_type = queue_type;
-		ret = ath5k_hw_setup_tx_queueprops(ah, queue, queue_info);
-		if (ret)
-			return ret;
-	}
-	/*
-	 * We use ah_txq_status to hold a temp value for
-	 * the Secondary interrupt mask registers on 5211+
-	 * check out ath5k_hw_reset_tx_queue
-	 */
-	AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
-
-	return queue;
-}
-
-/*
- * Setup a transmit queue
- */
-int ath5k_hw_setup_tx_queueprops(struct ath5k_hw *ah, int queue,
-				const struct ath5k_txq_info *queue_info)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return -EIO;
-
-	memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
-
-	/*XXX: Is this supported on 5210 ?*/
-	if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
-			((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
-			(queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
-			queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
-		ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
-
-	return 0;
-}
-
-/*
- * Get properties for a specific transmit queue
- */
-int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
-		struct ath5k_txq_info *queue_info)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
-	return 0;
-}
-
-/*
- * Set a transmit queue inactive
- */
-void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
-		return;
-
-	/* This queue will be skipped in further operations */
-	ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
-	/*For SIMR setup*/
-	AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
-}
-
-/*
- * Set DFS params for a transmit queue
- */
-int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
-{
-	u32 cw_min, cw_max, retry_lg, retry_sh;
-	struct ath5k_txq_info *tq = &ah->ah_txq[queue];
-
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	tq = &ah->ah_txq[queue];
-
-	if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return 0;
-
-	if (ah->ah_version == AR5K_AR5210) {
-		/* Only handle data queues, others will be ignored */
-		if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
-			return 0;
-
-		/* Set Slot time */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
-			AR5K_SLOT_TIME);
-		/* Set ACK_CTS timeout */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
-			AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
-		/* Set Transmit Latency */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_TRANSMIT_LATENCY_TURBO :
-			AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
-		/* Set IFS0 */
-		if (ah->ah_turbo)
-			 ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
-				(ah->ah_aifs + tq->tqi_aifs) *
-				AR5K_INIT_SLOT_TIME_TURBO) <<
-				AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
-				AR5K_IFS0);
-		else
-			ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
-				(ah->ah_aifs + tq->tqi_aifs) *
-				AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
-				AR5K_INIT_SIFS, AR5K_IFS0);
-
-		/* Set IFS1 */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
-			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
-		/* Set AR5K_PHY_SETTLING */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-			| 0x38 :
-			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
-			| 0x1C,
-			AR5K_PHY_SETTLING);
-		/* Set Frame Control Register */
-		ath5k_hw_reg_write(ah, ah->ah_turbo ?
-			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
-			AR5K_PHY_TURBO_SHORT | 0x2020) :
-			(AR5K_PHY_FRAME_CTL_INI | 0x1020),
-			AR5K_PHY_FRAME_CTL_5210);
-	}
-
-	/*
-	 * Calculate cwmin/max by channel mode
-	 */
-	cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
-	cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
-	ah->ah_aifs = AR5K_TUNE_AIFS;
-	/*XR is only supported on 5212*/
-	if (IS_CHAN_XR(ah->ah_current_channel) &&
-			ah->ah_version == AR5K_AR5212) {
-		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
-		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
-		ah->ah_aifs = AR5K_TUNE_AIFS_XR;
-	/*B mode is not supported on 5210*/
-	} else if (IS_CHAN_B(ah->ah_current_channel) &&
-			ah->ah_version != AR5K_AR5210) {
-		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
-		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
-		ah->ah_aifs = AR5K_TUNE_AIFS_11B;
-	}
-
-	cw_min = 1;
-	while (cw_min < ah->ah_cw_min)
-		cw_min = (cw_min << 1) | 1;
-
-	cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
-		((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
-	cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
-		((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
-
-	/*
-	 * Calculate and set retry limits
-	 */
-	if (ah->ah_software_retry) {
-		/* XXX Need to test this */
-		retry_lg = ah->ah_limit_tx_retries;
-		retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
-			AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
-	} else {
-		retry_lg = AR5K_INIT_LG_RETRY;
-		retry_sh = AR5K_INIT_SH_RETRY;
-	}
-
-	/*No QCU/DCU [5210]*/
-	if (ah->ah_version == AR5K_AR5210) {
-		ath5k_hw_reg_write(ah,
-			(cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
-			| AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
-				AR5K_NODCU_RETRY_LMT_SLG_RETRY)
-			| AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
-				AR5K_NODCU_RETRY_LMT_SSH_RETRY)
-			| AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
-			| AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
-			AR5K_NODCU_RETRY_LMT);
-	} else {
-		/*QCU/DCU [5211+]*/
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
-				AR5K_DCU_RETRY_LMT_SLG_RETRY) |
-			AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
-				AR5K_DCU_RETRY_LMT_SSH_RETRY) |
-			AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
-			AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
-			AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
-
-	/*===Rest is also for QCU/DCU only [5211+]===*/
-
-		/*
-		 * Set initial content window (cw_min/cw_max)
-		 * and arbitrated interframe space (aifs)...
-		 */
-		ath5k_hw_reg_write(ah,
-			AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
-			AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
-			AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
-				AR5K_DCU_LCL_IFS_AIFS),
-			AR5K_QUEUE_DFS_LOCAL_IFS(queue));
-
-		/*
-		 * Set misc registers
-		 */
-		ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
-			AR5K_QUEUE_MISC(queue));
-
-		if (tq->tqi_cbr_period) {
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
-				AR5K_QCU_CBRCFG_INTVAL) |
-				AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
-				AR5K_QCU_CBRCFG_ORN_THRES),
-				AR5K_QUEUE_CBRCFG(queue));
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_CBR);
-			if (tq->tqi_cbr_overflow_limit)
-				AR5K_REG_ENABLE_BITS(ah,
-					AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_CBR_THRES_ENABLE);
-		}
-
-		if (tq->tqi_ready_time)
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
-				AR5K_QCU_RDYTIMECFG_INTVAL) |
-				AR5K_QCU_RDYTIMECFG_ENABLE,
-				AR5K_QUEUE_RDYTIMECFG(queue));
-
-		if (tq->tqi_burst_time) {
-			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
-				AR5K_DCU_CHAN_TIME_DUR) |
-				AR5K_DCU_CHAN_TIME_ENABLE,
-				AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
-
-			if (tq->tqi_flags & AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
-				AR5K_REG_ENABLE_BITS(ah,
-					AR5K_QUEUE_MISC(queue),
-					AR5K_QCU_MISC_RDY_VEOL_POLICY);
-		}
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
-			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
-				AR5K_QUEUE_DFS_MISC(queue));
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
-			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
-				AR5K_QUEUE_DFS_MISC(queue));
-
-		/*
-		 * Set registers by queue type
-		 */
-		switch (tq->tqi_type) {
-		case AR5K_TX_QUEUE_BEACON:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP_BCN |
-				AR5K_QCU_MISC_BCN_ENABLE);
-
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
-				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
-				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
-				AR5K_DCU_MISC_BCN_ENABLE);
-
-			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
-				(AR5K_TUNE_SW_BEACON_RESP -
-				AR5K_TUNE_DMA_BEACON_RESP) -
-				AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
-				AR5K_QCU_RDYTIMECFG_ENABLE,
-				AR5K_QUEUE_RDYTIMECFG(queue));
-			break;
-
-		case AR5K_TX_QUEUE_CAB:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_FRSHED_DBA_GT |
-				AR5K_QCU_MISC_CBREXP |
-				AR5K_QCU_MISC_CBREXP_BCN);
-
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
-				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
-				AR5K_DCU_MISC_ARBLOCK_CTL_S));
-			break;
-
-		case AR5K_TX_QUEUE_UAPSD:
-			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
-				AR5K_QCU_MISC_CBREXP);
-			break;
-
-		case AR5K_TX_QUEUE_DATA:
-		default:
-			break;
-		}
-
-		/*
-		 * Enable interrupts for this tx queue
-		 * in the secondary interrupt mask registers
-		 */
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
-
-		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
-			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
-
-
-		/* Update secondary interrupt mask registers */
-		ah->ah_txq_imr_txok &= ah->ah_txq_status;
-		ah->ah_txq_imr_txerr &= ah->ah_txq_status;
-		ah->ah_txq_imr_txurn &= ah->ah_txq_status;
-		ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
-		ah->ah_txq_imr_txeol &= ah->ah_txq_status;
-
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
-			AR5K_SIMR0_QCU_TXOK) |
-			AR5K_REG_SM(ah->ah_txq_imr_txdesc,
-			AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
-			AR5K_SIMR1_QCU_TXERR) |
-			AR5K_REG_SM(ah->ah_txq_imr_txeol,
-			AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
-		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
-			AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
-	}
-
-	return 0;
-}
-
-/*
- * Get number of pending frames
- * for a specific queue [5211+]
- */
-u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue) {
-	ATH5K_TRACE(ah->ah_sc);
-	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
-
-	/* Return if queue is declared inactive */
-	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
-		return false;
-
-	/* XXX: How about AR5K_CFG_TXCNT ? */
-	if (ah->ah_version == AR5K_AR5210)
-		return false;
-
-	return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
-}
-
-/*
- * Set slot time
- */
-int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
-		return -EINVAL;
-
-	if (ah->ah_version == AR5K_AR5210)
-		ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
-				ah->ah_turbo), AR5K_SLOT_TIME);
-	else
-		ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
-
-	return 0;
-}
-
-/*
- * Get slot time
- */
-unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (ah->ah_version == AR5K_AR5210)
-		return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
-				AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
-	else
-		return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
-}
-
-
-/******************************\
- Hardware Descriptor Functions
-\******************************/
-
-/*
- * TX Descriptor
- */
-
-/*
- * Initialize the 2-word tx descriptor on 5210/5211
- */
-static int
-ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
-	unsigned int pkt_len, unsigned int hdr_len, enum ath5k_pkt_type type,
-	unsigned int tx_power, unsigned int tx_rate0, unsigned int tx_tries0,
-	unsigned int key_index, unsigned int antenna_mode, unsigned int flags,
-	unsigned int rtscts_rate, unsigned int rtscts_duration)
-{
-	u32 frame_type;
-	struct ath5k_hw_2w_tx_ctl *tx_ctl;
-	unsigned int frame_len;
-
-	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
-
-	/*
-	 * Validate input
-	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
-	 *   noise on the channel, so it is important to avoid this.
-	 */
-	if (unlikely(tx_tries0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero retries\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-	if (unlikely(tx_rate0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero rate\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	/* Clear descriptor */
-	memset(&desc->ud.ds_tx5210, 0, sizeof(struct ath5k_hw_5210_tx_desc));
-
-	/* Setup control descriptor */
-
-	/* Verify and set frame length */
-
-	/* remove padding we might have added before */
-	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
-
-	if (frame_len & ~AR5K_2W_TX_DESC_CTL0_FRAME_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_0 = frame_len & AR5K_2W_TX_DESC_CTL0_FRAME_LEN;
-
-	/* Verify and set buffer length */
-
-	/* NB: beacon's BufLen must be a multiple of 4 bytes */
-	if(type == AR5K_PKT_TYPE_BEACON)
-		pkt_len = roundup(pkt_len, 4);
-
-	if (pkt_len & ~AR5K_2W_TX_DESC_CTL1_BUF_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_1 = pkt_len & AR5K_2W_TX_DESC_CTL1_BUF_LEN;
-
-	/*
-	 * Verify and set header length
-	 * XXX: I only found that on 5210 code, does it work on 5211 ?
-	 */
-	if (ah->ah_version == AR5K_AR5210) {
-		if (hdr_len & ~AR5K_2W_TX_DESC_CTL0_HEADER_LEN)
-			return -EINVAL;
-		tx_ctl->tx_control_0 |=
-			AR5K_REG_SM(hdr_len, AR5K_2W_TX_DESC_CTL0_HEADER_LEN);
-	}
-
-	/*Diferences between 5210-5211*/
-	if (ah->ah_version == AR5K_AR5210) {
-		switch (type) {
-		case AR5K_PKT_TYPE_BEACON:
-		case AR5K_PKT_TYPE_PROBE_RESP:
-			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_NO_DELAY;
-		case AR5K_PKT_TYPE_PIFS:
-			frame_type = AR5K_AR5210_TX_DESC_FRAME_TYPE_PIFS;
-		default:
-			frame_type = type /*<< 2 ?*/;
-		}
-
-		tx_ctl->tx_control_0 |=
-			AR5K_REG_SM(frame_type, AR5K_2W_TX_DESC_CTL0_FRAME_TYPE) |
-			AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
-	} else {
-		tx_ctl->tx_control_0 |=
-			AR5K_REG_SM(tx_rate0, AR5K_2W_TX_DESC_CTL0_XMIT_RATE) |
-			AR5K_REG_SM(antenna_mode, AR5K_2W_TX_DESC_CTL0_ANT_MODE_XMIT);
-		tx_ctl->tx_control_1 |=
-			AR5K_REG_SM(type, AR5K_2W_TX_DESC_CTL1_FRAME_TYPE);
-	}
-#define _TX_FLAGS(_c, _flag)						\
-	if (flags & AR5K_TXDESC_##_flag)				\
-		tx_ctl->tx_control_##_c |=				\
-			AR5K_2W_TX_DESC_CTL##_c##_##_flag
-
-	_TX_FLAGS(0, CLRDMASK);
-	_TX_FLAGS(0, VEOL);
-	_TX_FLAGS(0, INTREQ);
-	_TX_FLAGS(0, RTSENA);
-	_TX_FLAGS(1, NOACK);
-
-#undef _TX_FLAGS
-
-	/*
-	 * WEP crap
-	 */
-	if (key_index != AR5K_TXKEYIX_INVALID) {
-		tx_ctl->tx_control_0 |=
-			AR5K_2W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
-		tx_ctl->tx_control_1 |=
-			AR5K_REG_SM(key_index,
-			AR5K_2W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
-	}
-
-	/*
-	 * RTS/CTS Duration [5210 ?]
-	 */
-	if ((ah->ah_version == AR5K_AR5210) &&
-			(flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)))
-		tx_ctl->tx_control_1 |= rtscts_duration &
-				AR5K_2W_TX_DESC_CTL1_RTS_DURATION;
-
-	return 0;
-}
-
-/*
- * Initialize the 4-word tx descriptor on 5212
- */
-static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
-	struct ath5k_desc *desc, unsigned int pkt_len, unsigned int hdr_len,
-	enum ath5k_pkt_type type, unsigned int tx_power, unsigned int tx_rate0,
-	unsigned int tx_tries0, unsigned int key_index,
-	unsigned int antenna_mode, unsigned int flags, unsigned int rtscts_rate,
-	unsigned int rtscts_duration)
-{
-	struct ath5k_hw_4w_tx_ctl *tx_ctl;
-	unsigned int frame_len;
-
-	ATH5K_TRACE(ah->ah_sc);
-	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-
-	/*
-	 * Validate input
-	 * - Zero retries don't make sense.
-	 * - A zero rate will put the HW into a mode where it continously sends
-	 *   noise on the channel, so it is important to avoid this.
-	 */
-	if (unlikely(tx_tries0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero retries\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-	if (unlikely(tx_rate0 == 0)) {
-		ATH5K_ERR(ah->ah_sc, "zero rate\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	/* Clear descriptor */
-	memset(&desc->ud.ds_tx5212, 0, sizeof(struct ath5k_hw_5212_tx_desc));
-
-	/* Setup control descriptor */
-
-	/* Verify and set frame length */
-
-	/* remove padding we might have added before */
-	frame_len = pkt_len - (hdr_len & 3) + FCS_LEN;
-
-	if (frame_len & ~AR5K_4W_TX_DESC_CTL0_FRAME_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_0 = frame_len & AR5K_4W_TX_DESC_CTL0_FRAME_LEN;
-
-	/* Verify and set buffer length */
-
-	/* NB: beacon's BufLen must be a multiple of 4 bytes */
-	if(type == AR5K_PKT_TYPE_BEACON)
-		pkt_len = roundup(pkt_len, 4);
-
-	if (pkt_len & ~AR5K_4W_TX_DESC_CTL1_BUF_LEN)
-		return -EINVAL;
-
-	tx_ctl->tx_control_1 = pkt_len & AR5K_4W_TX_DESC_CTL1_BUF_LEN;
-
-	tx_ctl->tx_control_0 |=
-		AR5K_REG_SM(tx_power, AR5K_4W_TX_DESC_CTL0_XMIT_POWER) |
-		AR5K_REG_SM(antenna_mode, AR5K_4W_TX_DESC_CTL0_ANT_MODE_XMIT);
-	tx_ctl->tx_control_1 |= AR5K_REG_SM(type,
-					AR5K_4W_TX_DESC_CTL1_FRAME_TYPE);
-	tx_ctl->tx_control_2 = AR5K_REG_SM(tx_tries0 + AR5K_TUNE_HWTXTRIES,
-					AR5K_4W_TX_DESC_CTL2_XMIT_TRIES0);
-	tx_ctl->tx_control_3 = tx_rate0 & AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
-
-#define _TX_FLAGS(_c, _flag)			\
-	if (flags & AR5K_TXDESC_##_flag)	\
-		tx_ctl->tx_control_##_c |=	\
-			AR5K_4W_TX_DESC_CTL##_c##_##_flag
-
-	_TX_FLAGS(0, CLRDMASK);
-	_TX_FLAGS(0, VEOL);
-	_TX_FLAGS(0, INTREQ);
-	_TX_FLAGS(0, RTSENA);
-	_TX_FLAGS(0, CTSENA);
-	_TX_FLAGS(1, NOACK);
-
-#undef _TX_FLAGS
-
-	/*
-	 * WEP crap
-	 */
-	if (key_index != AR5K_TXKEYIX_INVALID) {
-		tx_ctl->tx_control_0 |= AR5K_4W_TX_DESC_CTL0_ENCRYPT_KEY_VALID;
-		tx_ctl->tx_control_1 |= AR5K_REG_SM(key_index,
-				AR5K_4W_TX_DESC_CTL1_ENCRYPT_KEY_INDEX);
-	}
-
-	/*
-	 * RTS/CTS
-	 */
-	if (flags & (AR5K_TXDESC_RTSENA | AR5K_TXDESC_CTSENA)) {
-		if ((flags & AR5K_TXDESC_RTSENA) &&
-				(flags & AR5K_TXDESC_CTSENA))
-			return -EINVAL;
-		tx_ctl->tx_control_2 |= rtscts_duration &
-				AR5K_4W_TX_DESC_CTL2_RTS_DURATION;
-		tx_ctl->tx_control_3 |= AR5K_REG_SM(rtscts_rate,
-				AR5K_4W_TX_DESC_CTL3_RTS_CTS_RATE);
-	}
-
-	return 0;
-}
-
-/*
- * Initialize a 4-word multirate tx descriptor on 5212
- */
-static int
-ath5k_hw_setup_xr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
-	unsigned int tx_rate1, u_int tx_tries1, u_int tx_rate2, u_int tx_tries2,
-	unsigned int tx_rate3, u_int tx_tries3)
-{
-	struct ath5k_hw_4w_tx_ctl *tx_ctl;
-
-	/*
-	 * Rates can be 0 as long as the retry count is 0 too.
-	 * A zero rate and nonzero retry count will put the HW into a mode where
-	 * it continously sends noise on the channel, so it is important to
-	 * avoid this.
-	 */
-	if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
-		     (tx_rate2 == 0 && tx_tries2 != 0) ||
-		     (tx_rate3 == 0 && tx_tries3 != 0))) {
-		ATH5K_ERR(ah->ah_sc, "zero rate\n");
-		WARN_ON(1);
-		return -EINVAL;
-	}
-
-	if (ah->ah_version == AR5K_AR5212) {
-		tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-
-#define _XTX_TRIES(_n)							\
-	if (tx_tries##_n) {						\
-		tx_ctl->tx_control_2 |=				\
-		    AR5K_REG_SM(tx_tries##_n,				\
-		    AR5K_4W_TX_DESC_CTL2_XMIT_TRIES##_n);		\
-		tx_ctl->tx_control_3 |=				\
-		    AR5K_REG_SM(tx_rate##_n,				\
-		    AR5K_4W_TX_DESC_CTL3_XMIT_RATE##_n);		\
-	}
-
-		_XTX_TRIES(1);
-		_XTX_TRIES(2);
-		_XTX_TRIES(3);
-
-#undef _XTX_TRIES
-
-		return 1;
-	}
-
-	return 0;
-}
-
-/*
- * Proccess the tx status descriptor on 5210/5211
- */
-static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
-{
-	struct ath5k_hw_2w_tx_ctl *tx_ctl;
-	struct ath5k_hw_tx_status *tx_status;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	tx_ctl = &desc->ud.ds_tx5210.tx_ctl;
-	tx_status = &desc->ud.ds_tx5210.tx_stat;
-
-	/* No frame has been send or error */
-	if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Get descriptor status
-	 */
-	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
-	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
-	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
-	/*TODO: ts->ts_virtcol + test*/
-	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_SEQ_NUM);
-	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
-	ts->ts_antenna = 1;
-	ts->ts_status = 0;
-	ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_0,
-		AR5K_2W_TX_DESC_CTL0_XMIT_RATE);
-
-	if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
-		if (tx_status->tx_status_0 &
-				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
-			ts->ts_status |= AR5K_TXERR_XRETRY;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
-			ts->ts_status |= AR5K_TXERR_FIFO;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
-			ts->ts_status |= AR5K_TXERR_FILT;
-	}
-
-	return 0;
-}
-
-/*
- * Proccess a tx descriptor on 5212
- */
-static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_tx_status *ts)
-{
-	struct ath5k_hw_4w_tx_ctl *tx_ctl;
-	struct ath5k_hw_tx_status *tx_status;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	tx_ctl = &desc->ud.ds_tx5212.tx_ctl;
-	tx_status = &desc->ud.ds_tx5212.tx_stat;
-
-	/* No frame has been send or error */
-	if (unlikely((tx_status->tx_status_1 & AR5K_DESC_TX_STATUS1_DONE) == 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Get descriptor status
-	 */
-	ts->ts_tstamp = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SEND_TIMESTAMP);
-	ts->ts_shortretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_SHORT_RETRY_COUNT);
-	ts->ts_longretry = AR5K_REG_MS(tx_status->tx_status_0,
-		AR5K_DESC_TX_STATUS0_LONG_RETRY_COUNT);
-	ts->ts_seqnum = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_SEQ_NUM);
-	ts->ts_rssi = AR5K_REG_MS(tx_status->tx_status_1,
-		AR5K_DESC_TX_STATUS1_ACK_SIG_STRENGTH);
-	ts->ts_antenna = (tx_status->tx_status_1 &
-		AR5K_DESC_TX_STATUS1_XMIT_ANTENNA) ? 2 : 1;
-	ts->ts_status = 0;
-
-	switch (AR5K_REG_MS(tx_status->tx_status_1,
-			AR5K_DESC_TX_STATUS1_FINAL_TS_INDEX)) {
-	case 0:
-		ts->ts_rate = tx_ctl->tx_control_3 &
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE0;
-		break;
-	case 1:
-		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE1);
-		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
-			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES1);
-		break;
-	case 2:
-		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE2);
-		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
-			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES2);
-		break;
-	case 3:
-		ts->ts_rate = AR5K_REG_MS(tx_ctl->tx_control_3,
-			AR5K_4W_TX_DESC_CTL3_XMIT_RATE3);
-		ts->ts_longretry += AR5K_REG_MS(tx_ctl->tx_control_2,
-			AR5K_4W_TX_DESC_CTL2_XMIT_TRIES3);
-		break;
-	}
-
-	if ((tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FRAME_XMIT_OK) == 0){
-		if (tx_status->tx_status_0 &
-				AR5K_DESC_TX_STATUS0_EXCESSIVE_RETRIES)
-			ts->ts_status |= AR5K_TXERR_XRETRY;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FIFO_UNDERRUN)
-			ts->ts_status |= AR5K_TXERR_FIFO;
-
-		if (tx_status->tx_status_0 & AR5K_DESC_TX_STATUS0_FILTERED)
-			ts->ts_status |= AR5K_TXERR_FILT;
-	}
-
-	return 0;
-}
-
-/*
- * RX Descriptor
- */
-
-/*
- * Initialize an rx descriptor
- */
-int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
-			u32 size, unsigned int flags)
-{
-	struct ath5k_hw_rx_ctl *rx_ctl;
-
-	ATH5K_TRACE(ah->ah_sc);
-	rx_ctl = &desc->ud.ds_rx.rx_ctl;
-
-	/*
-	 * Clear the descriptor
-	 * If we don't clean the status descriptor,
-	 * while scanning we get too many results,
-	 * most of them virtual, after some secs
-	 * of scanning system hangs. M.F.
-	*/
-	memset(&desc->ud.ds_rx, 0, sizeof(struct ath5k_hw_all_rx_desc));
-
-	/* Setup descriptor */
-	rx_ctl->rx_control_1 = size & AR5K_DESC_RX_CTL1_BUF_LEN;
-	if (unlikely(rx_ctl->rx_control_1 != size))
-		return -EINVAL;
-
-	if (flags & AR5K_RXDESC_INTREQ)
-		rx_ctl->rx_control_1 |= AR5K_DESC_RX_CTL1_INTREQ;
-
-	return 0;
-}
-
-/*
- * Proccess the rx status descriptor on 5210/5211
- */
-static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
-{
-	struct ath5k_hw_rx_status *rx_status;
-
-	rx_status = &desc->ud.ds_rx.u.rx_stat;
-
-	/* No frame received / not ready */
-	if (unlikely((rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_DONE)
-				== 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Frame receive status
-	 */
-	rs->rs_datalen = rx_status->rx_status_0 &
-		AR5K_5210_RX_DESC_STATUS0_DATA_LEN;
-	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL);
-	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE);
-	rs->rs_antenna = rx_status->rx_status_0 &
-		AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANTENNA;
-	rs->rs_more = rx_status->rx_status_0 &
-		AR5K_5210_RX_DESC_STATUS0_MORE;
-	/* TODO: this timestamp is 13 bit, later on we assume 15 bit */
-	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
-		AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
-	rs->rs_status = 0;
-	rs->rs_phyerr = 0;
-
-	/*
-	 * Key table status
-	 */
-	if (rx_status->rx_status_1 & AR5K_5210_RX_DESC_STATUS1_KEY_INDEX_VALID)
-		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
-			AR5K_5210_RX_DESC_STATUS1_KEY_INDEX);
-	else
-		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
-
-	/*
-	 * Receive/descriptor errors
-	 */
-	if ((rx_status->rx_status_1 &
-			AR5K_5210_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_CRC;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_FIFO_OVERRUN)
-			rs->rs_status |= AR5K_RXERR_FIFO;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
-			rs->rs_status |= AR5K_RXERR_PHY;
-			rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
-					   AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
-		}
-
-		if (rx_status->rx_status_1 &
-				AR5K_5210_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_DECRYPT;
-	}
-
-	return 0;
-}
-
-/*
- * Proccess the rx status descriptor on 5212
- */
-static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
-		struct ath5k_desc *desc, struct ath5k_rx_status *rs)
-{
-	struct ath5k_hw_rx_status *rx_status;
-	struct ath5k_hw_rx_error *rx_err;
-
-	ATH5K_TRACE(ah->ah_sc);
-	rx_status = &desc->ud.ds_rx.u.rx_stat;
-
-	/* Overlay on error */
-	rx_err = &desc->ud.ds_rx.u.rx_err;
-
-	/* No frame received / not ready */
-	if (unlikely((rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_DONE)
-				== 0))
-		return -EINPROGRESS;
-
-	/*
-	 * Frame receive status
-	 */
-	rs->rs_datalen = rx_status->rx_status_0 &
-		AR5K_5212_RX_DESC_STATUS0_DATA_LEN;
-	rs->rs_rssi = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5212_RX_DESC_STATUS0_RECEIVE_SIGNAL);
-	rs->rs_rate = AR5K_REG_MS(rx_status->rx_status_0,
-		AR5K_5212_RX_DESC_STATUS0_RECEIVE_RATE);
-	rs->rs_antenna = rx_status->rx_status_0 &
-		AR5K_5212_RX_DESC_STATUS0_RECEIVE_ANTENNA;
-	rs->rs_more = rx_status->rx_status_0 &
-		AR5K_5212_RX_DESC_STATUS0_MORE;
-	rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
-		AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
-	rs->rs_status = 0;
-	rs->rs_phyerr = 0;
-
-	/*
-	 * Key table status
-	 */
-	if (rx_status->rx_status_1 & AR5K_5212_RX_DESC_STATUS1_KEY_INDEX_VALID)
-		rs->rs_keyix = AR5K_REG_MS(rx_status->rx_status_1,
-				AR5K_5212_RX_DESC_STATUS1_KEY_INDEX);
-	else
-		rs->rs_keyix = AR5K_RXKEYIX_INVALID;
-
-	/*
-	 * Receive/descriptor errors
-	 */
-	if ((rx_status->rx_status_1 &
-			AR5K_5212_RX_DESC_STATUS1_FRAME_RECEIVE_OK) == 0) {
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_CRC;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
-			rs->rs_status |= AR5K_RXERR_PHY;
-			rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
-					   AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
-		}
-
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_DECRYPT_CRC_ERROR)
-			rs->rs_status |= AR5K_RXERR_DECRYPT;
-
-		if (rx_status->rx_status_1 &
-				AR5K_5212_RX_DESC_STATUS1_MIC_ERROR)
-			rs->rs_status |= AR5K_RXERR_MIC;
-	}
-
-	return 0;
-}
-
-
-/****************\
-  GPIO Functions
-\****************/
-
-/*
- * Set led state
- */
-void ath5k_hw_set_ledstate(struct ath5k_hw *ah, unsigned int state)
-{
-	u32 led;
-	/*5210 has different led mode handling*/
-	u32 led_5210;
-
-	ATH5K_TRACE(ah->ah_sc);
-
-	/*Reset led status*/
-	if (ah->ah_version != AR5K_AR5210)
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG,
-			AR5K_PCICFG_LEDMODE |  AR5K_PCICFG_LED);
-	else
-		AR5K_REG_DISABLE_BITS(ah, AR5K_PCICFG, AR5K_PCICFG_LED);
-
-	/*
-	 * Some blinking values, define at your wish
-	 */
-	switch (state) {
-	case AR5K_LED_SCAN:
-	case AR5K_LED_AUTH:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_PEND;
-		led_5210 = AR5K_PCICFG_LED_PEND | AR5K_PCICFG_LED_BCTL;
-		break;
-
-	case AR5K_LED_INIT:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_NONE;
-		led_5210 = AR5K_PCICFG_LED_PEND;
-		break;
-
-	case AR5K_LED_ASSOC:
-	case AR5K_LED_RUN:
-		led = AR5K_PCICFG_LEDMODE_PROP | AR5K_PCICFG_LED_ASSOC;
-		led_5210 = AR5K_PCICFG_LED_ASSOC;
-		break;
-
-	default:
-		led = AR5K_PCICFG_LEDMODE_PROM | AR5K_PCICFG_LED_NONE;
-		led_5210 = AR5K_PCICFG_LED_PEND;
-		break;
-	}
-
-	/*Write new status to the register*/
-	if (ah->ah_version != AR5K_AR5210)
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led);
-	else
-		AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, led_5210);
-}
-
-/*
- * Set GPIO outputs
- */
-int ath5k_hw_set_gpio_output(struct ath5k_hw *ah, u32 gpio)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return -EINVAL;
-
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
-		AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_OUT(gpio), AR5K_GPIOCR);
-
-	return 0;
-}
-
-/*
- * Set GPIO inputs
- */
-int ath5k_hw_set_gpio_input(struct ath5k_hw *ah, u32 gpio)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return -EINVAL;
-
-	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &~
-		AR5K_GPIOCR_OUT(gpio)) | AR5K_GPIOCR_IN(gpio), AR5K_GPIOCR);
-
-	return 0;
-}
-
-/*
- * Get GPIO state
- */
-u32 ath5k_hw_get_gpio(struct ath5k_hw *ah, u32 gpio)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return 0xffffffff;
-
-	/* GPIO input magic */
-	return ((ath5k_hw_reg_read(ah, AR5K_GPIODI) & AR5K_GPIODI_M) >> gpio) &
-		0x1;
-}
-
-/*
- * Set GPIO state
- */
-int ath5k_hw_set_gpio(struct ath5k_hw *ah, u32 gpio, u32 val)
-{
-	u32 data;
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (gpio > AR5K_NUM_GPIO)
-		return -EINVAL;
-
-	/* GPIO output magic */
-	data = ath5k_hw_reg_read(ah, AR5K_GPIODO);
-
-	data &= ~(1 << gpio);
-	data |= (val & 1) << gpio;
-
-	ath5k_hw_reg_write(ah, data, AR5K_GPIODO);
-
-	return 0;
-}
-
-/*
- * Initialize the GPIO interrupt (RFKill switch)
- */
-void ath5k_hw_set_gpio_intr(struct ath5k_hw *ah, unsigned int gpio,
-		u32 interrupt_level)
-{
-	u32 data;
-
-	ATH5K_TRACE(ah->ah_sc);
-	if (gpio > AR5K_NUM_GPIO)
-		return;
-
-	/*
-	 * Set the GPIO interrupt
-	 */
-	data = (ath5k_hw_reg_read(ah, AR5K_GPIOCR) &
-		~(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_SELH |
-		AR5K_GPIOCR_INT_ENA | AR5K_GPIOCR_OUT(gpio))) |
-		(AR5K_GPIOCR_INT_SEL(gpio) | AR5K_GPIOCR_INT_ENA);
-
-	ath5k_hw_reg_write(ah, interrupt_level ? data :
-		(data | AR5K_GPIOCR_INT_SELH), AR5K_GPIOCR);
-
-	ah->ah_imr |= AR5K_IMR_GPIO;
-
-	/* Enable GPIO interrupts */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PIMR, AR5K_IMR_GPIO);
-}
-
-
-
-
-/****************\
-  Misc functions
-\****************/
-
-int ath5k_hw_get_capability(struct ath5k_hw *ah,
-		enum ath5k_capability_type cap_type,
-		u32 capability, u32 *result)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	switch (cap_type) {
-	case AR5K_CAP_NUM_TXQUEUES:
-		if (result) {
-			if (ah->ah_version == AR5K_AR5210)
-				*result = AR5K_NUM_TX_QUEUES_NOQCU;
-			else
-				*result = AR5K_NUM_TX_QUEUES;
-			goto yes;
-		}
-	case AR5K_CAP_VEOL:
-		goto yes;
-	case AR5K_CAP_COMPRESSION:
-		if (ah->ah_version == AR5K_AR5212)
-			goto yes;
-		else
-			goto no;
-	case AR5K_CAP_BURST:
-		goto yes;
-	case AR5K_CAP_TPC:
-		goto yes;
-	case AR5K_CAP_BSSIDMASK:
-		if (ah->ah_version == AR5K_AR5212)
-			goto yes;
-		else
-			goto no;
-	case AR5K_CAP_XR:
-		if (ah->ah_version == AR5K_AR5212)
-			goto yes;
-		else
-			goto no;
-	default:
-		goto no;
-	}
-
-no:
-	return -EINVAL;
-yes:
-	return 0;
-}
-
-static int ath5k_hw_enable_pspoll(struct ath5k_hw *ah, u8 *bssid,
-		u16 assoc_id)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
-			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
-		return 0;
-	}
-
-	return -EIO;
-}
-
-static int ath5k_hw_disable_pspoll(struct ath5k_hw *ah)
-{
-	ATH5K_TRACE(ah->ah_sc);
-
-	if (ah->ah_version == AR5K_AR5210) {
-		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
-			AR5K_STA_ID1_NO_PSPOLL | AR5K_STA_ID1_DEFAULT_ANTENNA);
-		return 0;
-	}
-
-	return -EIO;
-}

drivers/net/wireless/ath5k/initvals.c

@@ -1,9 +1,9 @@
 /*
  * Initial register settings functions
  *
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -20,13 +20,9 @@
  */
 
 #include "ath5k.h"
-#include "base.h"
 #include "reg.h"
-
-/*
- * MAC/PHY REGISTERS
- */
-
+#include "debug.h"
+#include "base.h"
 
 /*
  * Mode-independent initial register writes
@@ -65,10 +61,10 @@ static const struct ath5k_ini ar5210_ini[] = {
 	{ AR5K_TXCFG,		AR5K_DMASIZE_128B },
 	{ AR5K_RXCFG,		AR5K_DMASIZE_128B },
 	{ AR5K_CFG,		AR5K_INIT_CFG },
-	{ AR5K_TOPS,		AR5K_INIT_TOPS },
-	{ AR5K_RXNOFRM,		AR5K_INIT_RXNOFRM },
-	{ AR5K_RPGTO,		AR5K_INIT_RPGTO },
-	{ AR5K_TXNOFRM,		AR5K_INIT_TXNOFRM },
+	{ AR5K_TOPS,		8 },
+	{ AR5K_RXNOFRM,		8 },
+	{ AR5K_RPGTO,		0 },
+	{ AR5K_TXNOFRM,		0 },
 	{ AR5K_SFR,		0 },
 	{ AR5K_MIBC,		0 },
 	{ AR5K_MISC,		0 },

drivers/net/wireless/ath5k/pcu.c

@@ -0,0 +1,1002 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Matthew W. S. Bell  <mentor@madwifi.org>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/*********************************\
+* Protocol Control Unit Functions *
+\*********************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*******************\
+* Generic functions *
+\*******************/
+
+/**
+ * ath5k_hw_set_opmode - Set PCU operating mode
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Initialize PCU for the various operating modes (AP/STA etc)
+ *
+ * NOTE: ah->ah_op_mode must be set before calling this.
+ */
+int ath5k_hw_set_opmode(struct ath5k_hw *ah)
+{
+	u32 pcu_reg, beacon_reg, low_id, high_id;
+
+	pcu_reg = 0;
+	beacon_reg = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	switch (ah->ah_op_mode) {
+	case IEEE80211_IF_TYPE_IBSS:
+		pcu_reg |= AR5K_STA_ID1_ADHOC | AR5K_STA_ID1_DESC_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		beacon_reg |= AR5K_BCR_ADHOC;
+		break;
+
+	case IEEE80211_IF_TYPE_AP:
+	case IEEE80211_IF_TYPE_MESH_POINT:
+		pcu_reg |= AR5K_STA_ID1_AP | AR5K_STA_ID1_RTS_DEF_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		beacon_reg |= AR5K_BCR_AP;
+		break;
+
+	case IEEE80211_IF_TYPE_STA:
+		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_PWR_SV : 0);
+	case IEEE80211_IF_TYPE_MNTR:
+		pcu_reg |= AR5K_STA_ID1_DEFAULT_ANTENNA |
+			(ah->ah_version == AR5K_AR5210 ?
+				AR5K_STA_ID1_NO_PSPOLL : 0);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Set PCU registers
+	 */
+	low_id = AR5K_LOW_ID(ah->ah_sta_id);
+	high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
+
+	/*
+	 * Set Beacon Control Register on 5210
+	 */
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, beacon_reg, AR5K_BCR);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_update - Update mib counters (mac layer statistics)
+ *
+ * @ah: The &struct ath5k_hw
+ * @stats: The &struct ieee80211_low_level_stats we use to track
+ * statistics on the driver
+ *
+ * Reads MIB counters from PCU and updates sw statistics. Must be
+ * called after a MIB interrupt.
+ */
+void ath5k_hw_update_mib_counters(struct ath5k_hw *ah,
+		struct ieee80211_low_level_stats  *stats)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Read-And-Clear */
+	stats->dot11ACKFailureCount += ath5k_hw_reg_read(ah, AR5K_ACK_FAIL);
+	stats->dot11RTSFailureCount += ath5k_hw_reg_read(ah, AR5K_RTS_FAIL);
+	stats->dot11RTSSuccessCount += ath5k_hw_reg_read(ah, AR5K_RTS_OK);
+	stats->dot11FCSErrorCount += ath5k_hw_reg_read(ah, AR5K_FCS_FAIL);
+
+	/* XXX: Should we use this to track beacon count ?
+	 * -we read it anyway to clear the register */
+	ath5k_hw_reg_read(ah, AR5K_BEACON_CNT);
+
+	/* Reset profile count registers on 5212*/
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_TX);
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RX);
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_RXCLR);
+		ath5k_hw_reg_write(ah, 0, AR5K_PROFCNT_CYCLE);
+	}
+}
+
+/**
+ * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
+ *
+ * @ah: The &struct ath5k_hw
+ * @high: Flag to determine if we want to use high transmition rate
+ * for ACKs or not
+ *
+ * If high flag is set, we tell hw to use a set of control rates based on
+ * the current transmition rate (check out control_rates array inside reset.c).
+ * If not hw just uses the lowest rate available for the current modulation
+ * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
+ */
+void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high)
+{
+	if (ah->ah_version != AR5K_AR5212)
+		return;
+	else {
+		u32 val = AR5K_STA_ID1_BASE_RATE_11B | AR5K_STA_ID1_ACKCTS_6MB;
+		if (high)
+			AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, val);
+		else
+			AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, val);
+	}
+}
+
+
+/******************\
+* ACK/CTS Timeouts *
+\******************/
+
+/**
+ * ath5k_hw_het_ack_timeout - Get ACK timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_ack_timeout(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+
+	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+			AR5K_TIME_OUT), AR5K_TIME_OUT_ACK), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_ack_timeout - Set ACK timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_ack_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_ACK),
+			ah->ah_turbo) <= timeout)
+		return -EINVAL;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_ACK,
+		ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_get_cts_timeout - Get CTS timeout from PCU in usec
+ *
+ * @ah: The &struct ath5k_hw
+ */
+unsigned int ath5k_hw_get_cts_timeout(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	return ath5k_hw_clocktoh(AR5K_REG_MS(ath5k_hw_reg_read(ah,
+			AR5K_TIME_OUT), AR5K_TIME_OUT_CTS), ah->ah_turbo);
+}
+
+/**
+ * ath5k_hw_set_cts_timeout - Set CTS timeout on PCU
+ *
+ * @ah: The &struct ath5k_hw
+ * @timeout: Timeout in usec
+ */
+int ath5k_hw_set_cts_timeout(struct ath5k_hw *ah, unsigned int timeout)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (ath5k_hw_clocktoh(AR5K_REG_MS(0xffffffff, AR5K_TIME_OUT_CTS),
+			ah->ah_turbo) <= timeout)
+		return -EINVAL;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_TIME_OUT, AR5K_TIME_OUT_CTS,
+			ath5k_hw_htoclock(timeout, ah->ah_turbo));
+
+	return 0;
+}
+
+
+/****************\
+* BSSID handling *
+\****************/
+
+/**
+ * ath5k_hw_get_lladdr - Get station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Initialize ah->ah_sta_id using the mac address provided
+ * (just a memcpy).
+ *
+ * TODO: Remove it once we merge ath5k_softc and ath5k_hw
+ */
+void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	memcpy(mac, ah->ah_sta_id, ETH_ALEN);
+}
+
+/**
+ * ath5k_hw_set_lladdr - Set station id
+ *
+ * @ah: The &struct ath5k_hw
+ * @mac: The card's mac address
+ *
+ * Set station id on hw using the provided mac address
+ */
+int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
+{
+	u32 low_id, high_id;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/* Set new station ID */
+	memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+
+	low_id = AR5K_LOW_ID(mac);
+	high_id = AR5K_HIGH_ID(mac);
+
+	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah, high_id, AR5K_STA_ID1);
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_set_associd - Set BSSID for association
+ *
+ * @ah: The &struct ath5k_hw
+ * @bssid: BSSID
+ * @assoc_id: Assoc id
+ *
+ * Sets the BSSID which trigers the "SME Join" operation
+ */
+void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+{
+	u32 low_id, high_id;
+	u16 tim_offset = 0;
+
+	/*
+	 * Set simple BSSID mask on 5212
+	 */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM0);
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_BSS_IDM1);
+	}
+
+	/*
+	 * Set BSSID which triggers the "SME Join" operation
+	 */
+	low_id = AR5K_LOW_ID(bssid);
+	high_id = AR5K_HIGH_ID(bssid);
+	ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
+	ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
+				AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+
+	if (assoc_id == 0) {
+		ath5k_hw_disable_pspoll(ah);
+		return;
+	}
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
+			tim_offset ? tim_offset + 4 : 0);
+
+	ath5k_hw_enable_pspoll(ah, NULL, 0);
+}
+
+/**
+ * ath5k_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @ah: the &struct ath5k_hw
+ * @mask: the bssid_mask, a u8 array of size ETH_ALEN
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of  ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ */
+/*
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ *                  \
+ * MAC:                0001 |
+ * BSSID-01:   0100 | --> Belongs to us
+ * BSSID-02:   1001 |
+ *                  /
+ * -------------------
+ * BSSID-03:   0110  | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ *             On loop iteration for BSSID-01:
+ *             ~(0001 ^ 0100)  -> ~(0101)
+ *                             ->   1010
+ *             bssid_mask      =    1010
+ *
+ *             On loop iteration for BSSID-02:
+ *             bssid_mask &= ~(0001   ^   1001)
+ *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
+ *             bssid_mask =   (1010)  & ~(1001)
+ *             bssid_mask =   (1010)  &  (0110)
+ *             bssid_mask =   0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01:  0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ *  --> allow = (0010) == 0000 ? 1 : 0;
+ *  --> allow = 0
+ *
+ *  Lets now test a frame that should work:
+ *
+ * IFRAME-02:  0001 (we should allow)
+ *
+ *     allow = (0001 & 1010) == 1010
+ *
+ *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
+ *  --> allow = (0010) == (0010)
+ *  --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03:  0100 --> allowed
+ * IFRAME-04:  1001 --> allowed
+ * IFRAME-05:  1101 --> allowed but its not for us!!!
+ *
+ */
+int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+{
+	u32 low_id, high_id;
+	ATH5K_TRACE(ah->ah_sc);
+
+	if (ah->ah_version == AR5K_AR5212) {
+		low_id = AR5K_LOW_ID(mask);
+		high_id = AR5K_HIGH_ID(mask);
+
+		ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
+		ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
+
+		return 0;
+	}
+
+	return -EIO;
+}
+
+
+/************\
+* RX Control *
+\************/
+
+/**
+ * ath5k_hw_start_rx_pcu - Start RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Starts RX engine on PCU so that hw can process RXed frames
+ * (ACK etc).
+ *
+ * NOTE: RX DMA should be already enabled using ath5k_hw_start_rx_dma
+ * TODO: Init ANI here
+ */
+void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_REG_DISABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/**
+ * at5k_hw_stop_rx_pcu - Stop RX engine
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Stops RX engine on PCU
+ *
+ * TODO: Detach ANI here
+ */
+void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_DIAG_SW, AR5K_DIAG_SW_DIS_RX);
+}
+
+/*
+ * Set multicast filter
+ */
+void ath5k_hw_set_mcast_filter(struct ath5k_hw *ah, u32 filter0, u32 filter1)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	/* Set the multicat filter */
+	ath5k_hw_reg_write(ah, filter0, AR5K_MCAST_FILTER0);
+	ath5k_hw_reg_write(ah, filter1, AR5K_MCAST_FILTER1);
+}
+
+/*
+ * Set multicast filter by index
+ */
+int ath5k_hw_set_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (index >= 64)
+		return -EINVAL;
+	else if (index >= 32)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER1,
+				(1 << (index - 32)));
+	else
+		AR5K_REG_ENABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+	return 0;
+}
+
+/*
+ * Clear Multicast filter by index
+ */
+int ath5k_hw_clear_mcast_filter_idx(struct ath5k_hw *ah, u32 index)
+{
+
+	ATH5K_TRACE(ah->ah_sc);
+	if (index >= 64)
+		return -EINVAL;
+	else if (index >= 32)
+		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER1,
+				(1 << (index - 32)));
+	else
+		AR5K_REG_DISABLE_BITS(ah, AR5K_MCAST_FILTER0, (1 << index));
+
+	return 0;
+}
+
+/**
+ * ath5k_hw_get_rx_filter - Get current rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the RX filter by reading rx filter and
+ * phy error filter registers. RX filter is used
+ * to set the allowed frame types that PCU will accept
+ * and pass to the driver. For a list of frame types
+ * check out reg.h.
+ */
+u32 ath5k_hw_get_rx_filter(struct ath5k_hw *ah)
+{
+	u32 data, filter = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+	filter = ath5k_hw_reg_read(ah, AR5K_RX_FILTER);
+
+	/*Radar detection for 5212*/
+	if (ah->ah_version == AR5K_AR5212) {
+		data = ath5k_hw_reg_read(ah, AR5K_PHY_ERR_FIL);
+
+		if (data & AR5K_PHY_ERR_FIL_RADAR)
+			filter |= AR5K_RX_FILTER_RADARERR;
+		if (data & (AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK))
+			filter |= AR5K_RX_FILTER_PHYERR;
+	}
+
+	return filter;
+}
+
+/**
+ * ath5k_hw_set_rx_filter - Set rx filter
+ *
+ * @ah: The &struct ath5k_hw
+ * @filter: RX filter mask (see reg.h)
+ *
+ * Sets RX filter register and also handles PHY error filter
+ * register on 5212 and newer chips so that we have proper PHY
+ * error reporting.
+ */
+void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
+{
+	u32 data = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Set PHY error filter register on 5212*/
+	if (ah->ah_version == AR5K_AR5212) {
+		if (filter & AR5K_RX_FILTER_RADARERR)
+			data |= AR5K_PHY_ERR_FIL_RADAR;
+		if (filter & AR5K_RX_FILTER_PHYERR)
+			data |= AR5K_PHY_ERR_FIL_OFDM | AR5K_PHY_ERR_FIL_CCK;
+	}
+
+	/*
+	 * The AR5210 uses promiscous mode to detect radar activity
+	 */
+	if (ah->ah_version == AR5K_AR5210 &&
+			(filter & AR5K_RX_FILTER_RADARERR)) {
+		filter &= ~AR5K_RX_FILTER_RADARERR;
+		filter |= AR5K_RX_FILTER_PROM;
+	}
+
+	/*Zero length DMA*/
+	if (data)
+		AR5K_REG_ENABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+	else
+		AR5K_REG_DISABLE_BITS(ah, AR5K_RXCFG, AR5K_RXCFG_ZLFDMA);
+
+	/*Write RX Filter register*/
+	ath5k_hw_reg_write(ah, filter & 0xff, AR5K_RX_FILTER);
+
+	/*Write PHY error filter register on 5212*/
+	if (ah->ah_version == AR5K_AR5212)
+		ath5k_hw_reg_write(ah, data, AR5K_PHY_ERR_FIL);
+
+}
+
+
+/****************\
+* Beacon control *
+\****************/
+
+/**
+ * ath5k_hw_get_tsf32 - Get a 32bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns lower 32 bits of current TSF
+ */
+u32 ath5k_hw_get_tsf32(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	return ath5k_hw_reg_read(ah, AR5K_TSF_L32);
+}
+
+/**
+ * ath5k_hw_get_tsf64 - Get the full 64bit TSF
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Returns the current TSF
+ */
+u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah)
+{
+	u64 tsf = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+	ATH5K_TRACE(ah->ah_sc);
+
+	return ath5k_hw_reg_read(ah, AR5K_TSF_L32) | (tsf << 32);
+}
+
+/**
+ * ath5k_hw_reset_tsf - Force a TSF reset
+ *
+ * @ah: The &struct ath5k_hw
+ *
+ * Forces a TSF reset on PCU
+ */
+void ath5k_hw_reset_tsf(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_RESET_TSF);
+}
+
+/*
+ * Initialize beacon timers
+ */
+void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval)
+{
+	u32 timer1, timer2, timer3;
+
+	ATH5K_TRACE(ah->ah_sc);
+	/*
+	 * Set the additional timers by mode
+	 */
+	switch (ah->ah_op_mode) {
+	case IEEE80211_IF_TYPE_STA:
+		if (ah->ah_version == AR5K_AR5210) {
+			timer1 = 0xffffffff;
+			timer2 = 0xffffffff;
+		} else {
+			timer1 = 0x0000ffff;
+			timer2 = 0x0007ffff;
+		}
+		break;
+
+	default:
+		timer1 = (next_beacon - AR5K_TUNE_DMA_BEACON_RESP) << 3;
+		timer2 = (next_beacon - AR5K_TUNE_SW_BEACON_RESP) << 3;
+	}
+
+	timer3 = next_beacon + (ah->ah_atim_window ? ah->ah_atim_window : 1);
+
+	/*
+	 * Set the beacon register and enable all timers.
+	 * (next beacon, DMA beacon, software beacon, ATIM window time)
+	 */
+	ath5k_hw_reg_write(ah, next_beacon, AR5K_TIMER0);
+	ath5k_hw_reg_write(ah, timer1, AR5K_TIMER1);
+	ath5k_hw_reg_write(ah, timer2, AR5K_TIMER2);
+	ath5k_hw_reg_write(ah, timer3, AR5K_TIMER3);
+
+	ath5k_hw_reg_write(ah, interval & (AR5K_BEACON_PERIOD |
+			AR5K_BEACON_RESET_TSF | AR5K_BEACON_ENABLE),
+		AR5K_BEACON);
+}
+
+#if 0
+/*
+ * Set beacon timers
+ */
+int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah,
+		const struct ath5k_beacon_state *state)
+{
+	u32 cfp_period, next_cfp, dtim, interval, next_beacon;
+
+	/*
+	 * TODO: should be changed through *state
+	 * review struct ath5k_beacon_state struct
+	 *
+	 * XXX: These are used for cfp period bellow, are they
+	 * ok ? Is it O.K. for tsf here to be 0 or should we use
+	 * get_tsf ?
+	 */
+	u32 dtim_count = 0; /* XXX */
+	u32 cfp_count = 0; /* XXX */
+	u32 tsf = 0; /* XXX */
+
+	ATH5K_TRACE(ah->ah_sc);
+	/* Return on an invalid beacon state */
+	if (state->bs_interval < 1)
+		return -EINVAL;
+
+	interval = state->bs_interval;
+	dtim = state->bs_dtim_period;
+
+	/*
+	 * PCF support?
+	 */
+	if (state->bs_cfp_period > 0) {
+		/*
+		 * Enable PCF mode and set the CFP
+		 * (Contention Free Period) and timer registers
+		 */
+		cfp_period = state->bs_cfp_period * state->bs_dtim_period *
+			state->bs_interval;
+		next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) *
+			state->bs_interval;
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1,
+				AR5K_STA_ID1_DEFAULT_ANTENNA |
+				AR5K_STA_ID1_PCF);
+		ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD);
+		ath5k_hw_reg_write(ah, state->bs_cfp_max_duration,
+				AR5K_CFP_DUR);
+		ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period :
+						next_cfp)) << 3, AR5K_TIMER2);
+	} else {
+		/* Disable PCF mode */
+		AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+				AR5K_STA_ID1_DEFAULT_ANTENNA |
+				AR5K_STA_ID1_PCF);
+	}
+
+	/*
+	 * Enable the beacon timer register
+	 */
+	ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0);
+
+	/*
+	 * Start the beacon timers
+	 */
+	ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) &
+		~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) |
+		AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0,
+		AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval,
+		AR5K_BEACON_PERIOD), AR5K_BEACON);
+
+	/*
+	 * Write new beacon miss threshold, if it appears to be valid
+	 * XXX: Figure out right values for min <= bs_bmiss_threshold <= max
+	 * and return if its not in range. We can test this by reading value and
+	 * setting value to a largest value and seeing which values register.
+	 */
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS,
+			state->bs_bmiss_threshold);
+
+	/*
+	 * Set sleep control register
+	 * XXX: Didn't find this in 5210 code but since this register
+	 * exists also in ar5k's 5210 headers i leave it as common code.
+	 */
+	AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR,
+			(state->bs_sleep_duration - 3) << 3);
+
+	/*
+	 * Set enhanced sleep registers on 5212
+	 */
+	if (ah->ah_version == AR5K_AR5212) {
+		if (state->bs_sleep_duration > state->bs_interval &&
+				roundup(state->bs_sleep_duration, interval) ==
+				state->bs_sleep_duration)
+			interval = state->bs_sleep_duration;
+
+		if (state->bs_sleep_duration > dtim && (dtim == 0 ||
+				roundup(state->bs_sleep_duration, dtim) ==
+				state->bs_sleep_duration))
+			dtim = state->bs_sleep_duration;
+
+		if (interval > dtim)
+			return -EINVAL;
+
+		next_beacon = interval == dtim ? state->bs_next_dtim :
+			state->bs_next_beacon;
+
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM((state->bs_next_dtim - 3) << 3,
+			AR5K_SLEEP0_NEXT_DTIM) |
+			AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) |
+			AR5K_SLEEP0_ENH_SLEEP_EN |
+			AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0);
+
+		ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3,
+			AR5K_SLEEP1_NEXT_TIM) |
+			AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1);
+
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) |
+			AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2);
+	}
+
+	return 0;
+}
+
+/*
+ * Reset beacon timers
+ */
+void ath5k_hw_reset_beacon(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	/*
+	 * Disable beacon timer
+	 */
+	ath5k_hw_reg_write(ah, 0, AR5K_TIMER0);
+
+	/*
+	 * Disable some beacon register values
+	 */
+	AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1,
+			AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF);
+	ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON);
+}
+
+/*
+ * Wait for beacon queue to finish
+ */
+int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr)
+{
+	unsigned int i;
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* 5210 doesn't have QCU*/
+	if (ah->ah_version == AR5K_AR5210) {
+		/*
+		 * Wait for beaconn queue to finish by checking
+		 * Control Register and Beacon Status Register.
+		 */
+		for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) {
+			if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F)
+					||
+			    !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F))
+				break;
+			udelay(10);
+		}
+
+		/* Timeout... */
+		if (i <= 0) {
+			/*
+			 * Re-schedule the beacon queue
+			 */
+			ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1);
+			ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE,
+					AR5K_BCR);
+
+			return -EIO;
+		}
+		ret = 0;
+	} else {
+	/*5211/5212*/
+		ret = ath5k_hw_register_timeout(ah,
+			AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON),
+			AR5K_QCU_STS_FRMPENDCNT, 0, false);
+
+		if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON))
+			return -EIO;
+	}
+
+	return ret;
+}
+#endif
+
+
+/*********************\
+* Key table functions *
+\*********************/
+
+/*
+ * Reset a key entry on the table
+ */
+int ath5k_hw_reset_key(struct ath5k_hw *ah, u16 entry)
+{
+	unsigned int i;
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+	for (i = 0; i < AR5K_KEYCACHE_SIZE; i++)
+		ath5k_hw_reg_write(ah, 0, AR5K_KEYTABLE_OFF(entry, i));
+
+	/*
+	 * Set NULL encryption on AR5212+
+	 *
+	 * Note: AR5K_KEYTABLE_TYPE -> AR5K_KEYTABLE_OFF(entry, 5)
+	 *       AR5K_KEYTABLE_TYPE_NULL -> 0x00000007
+	 *
+	 * Note2: Windows driver (ndiswrapper) sets this to
+	 *        0x00000714 instead of 0x00000007
+	 */
+	if (ah->ah_version > AR5K_AR5211)
+		ath5k_hw_reg_write(ah, AR5K_KEYTABLE_TYPE_NULL,
+				AR5K_KEYTABLE_TYPE(entry));
+
+	return 0;
+}
+
+/*
+ * Check if a table entry is valid
+ */
+int ath5k_hw_is_key_valid(struct ath5k_hw *ah, u16 entry)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+	/* Check the validation flag at the end of the entry */
+	return ath5k_hw_reg_read(ah, AR5K_KEYTABLE_MAC1(entry)) &
+		AR5K_KEYTABLE_VALID;
+}
+
+/*
+ * Set a key entry on the table
+ */
+int ath5k_hw_set_key(struct ath5k_hw *ah, u16 entry,
+		const struct ieee80211_key_conf *key, const u8 *mac)
+{
+	unsigned int i;
+	__le32 key_v[5] = {};
+	u32 keytype;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* key->keylen comes in from mac80211 in bytes */
+
+	if (key->keylen > AR5K_KEYTABLE_SIZE / 8)
+		return -EOPNOTSUPP;
+
+	switch (key->keylen) {
+	/* WEP 40-bit   = 40-bit  entered key + 24 bit IV = 64-bit */
+	case 40 / 8:
+		memcpy(&key_v[0], key->key, 5);
+		keytype = AR5K_KEYTABLE_TYPE_40;
+		break;
+
+	/* WEP 104-bit  = 104-bit entered key + 24-bit IV = 128-bit */
+	case 104 / 8:
+		memcpy(&key_v[0], &key->key[0], 6);
+		memcpy(&key_v[2], &key->key[6], 6);
+		memcpy(&key_v[4], &key->key[12], 1);
+		keytype = AR5K_KEYTABLE_TYPE_104;
+		break;
+	/* WEP 128-bit  = 128-bit entered key + 24 bit IV = 152-bit */
+	case 128 / 8:
+		memcpy(&key_v[0], &key->key[0], 6);
+		memcpy(&key_v[2], &key->key[6], 6);
+		memcpy(&key_v[4], &key->key[12], 4);
+		keytype = AR5K_KEYTABLE_TYPE_128;
+		break;
+
+	default:
+		return -EINVAL; /* shouldn't happen */
+	}
+
+	for (i = 0; i < ARRAY_SIZE(key_v); i++)
+		ath5k_hw_reg_write(ah, le32_to_cpu(key_v[i]),
+				AR5K_KEYTABLE_OFF(entry, i));
+
+	ath5k_hw_reg_write(ah, keytype, AR5K_KEYTABLE_TYPE(entry));
+
+	return ath5k_hw_set_key_lladdr(ah, entry, mac);
+}
+
+int ath5k_hw_set_key_lladdr(struct ath5k_hw *ah, u16 entry, const u8 *mac)
+{
+	u32 low_id, high_id;
+
+	ATH5K_TRACE(ah->ah_sc);
+	 /* Invalid entry (key table overflow) */
+	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
+
+	/* MAC may be NULL if it's a broadcast key. In this case no need to
+	 * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+	if (unlikely(mac == NULL)) {
+		low_id = 0xffffffff;
+		high_id = 0xffff | AR5K_KEYTABLE_VALID;
+	} else {
+		low_id = AR5K_LOW_ID(mac);
+		high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+	}
+
+	ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
+	ath5k_hw_reg_write(ah, high_id, AR5K_KEYTABLE_MAC1(entry));
+
+	return 0;
+}
+

drivers/net/wireless/ath5k/phy.c

@@ -1,9 +1,9 @@
 /*
  * PHY functions
  *
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2006, 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
+ * Copyright (c) 2004-2007 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2007 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -19,6 +19,8 @@
  *
  */
 
+#define _ATH5K_PHY
+
 #include <linux/delay.h>
 
 #include "ath5k.h"
@@ -2501,3 +2503,5 @@ int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, unsigned int power)
 
 	return ath5k_hw_txpower(ah, channel, power);
 }
+
+#undef _ATH5K_PHY

drivers/net/wireless/ath5k/qcu.c

@@ -0,0 +1,488 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+/********************************************\
+Queue Control Unit, DFS Control Unit Functions
+\********************************************/
+
+#include "ath5k.h"
+#include "reg.h"
+#include "debug.h"
+#include "base.h"
+
+/*
+ * Get properties for a transmit queue
+ */
+int ath5k_hw_get_tx_queueprops(struct ath5k_hw *ah, int queue,
+		struct ath5k_txq_info *queue_info)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	memcpy(queue_info, &ah->ah_txq[queue], sizeof(struct ath5k_txq_info));
+	return 0;
+}
+
+/*
+ * Set properties for a transmit queue
+ */
+int ath5k_hw_set_tx_queueprops(struct ath5k_hw *ah, int queue,
+				const struct ath5k_txq_info *queue_info)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return -EIO;
+
+	memcpy(&ah->ah_txq[queue], queue_info, sizeof(struct ath5k_txq_info));
+
+	/*XXX: Is this supported on 5210 ?*/
+	if ((queue_info->tqi_type == AR5K_TX_QUEUE_DATA &&
+			((queue_info->tqi_subtype == AR5K_WME_AC_VI) ||
+			(queue_info->tqi_subtype == AR5K_WME_AC_VO))) ||
+			queue_info->tqi_type == AR5K_TX_QUEUE_UAPSD)
+		ah->ah_txq[queue].tqi_flags |= AR5K_TXQ_FLAG_POST_FR_BKOFF_DIS;
+
+	return 0;
+}
+
+/*
+ * Initialize a transmit queue
+ */
+int ath5k_hw_setup_tx_queue(struct ath5k_hw *ah, enum ath5k_tx_queue queue_type,
+		struct ath5k_txq_info *queue_info)
+{
+	unsigned int queue;
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/*
+	 * Get queue by type
+	 */
+	/*5210 only has 2 queues*/
+	if (ah->ah_version == AR5K_AR5210) {
+		switch (queue_type) {
+		case AR5K_TX_QUEUE_DATA:
+			queue = AR5K_TX_QUEUE_ID_NOQCU_DATA;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+		case AR5K_TX_QUEUE_CAB:
+			queue = AR5K_TX_QUEUE_ID_NOQCU_BEACON;
+			break;
+		default:
+			return -EINVAL;
+		}
+	} else {
+		switch (queue_type) {
+		case AR5K_TX_QUEUE_DATA:
+			for (queue = AR5K_TX_QUEUE_ID_DATA_MIN;
+				ah->ah_txq[queue].tqi_type !=
+				AR5K_TX_QUEUE_INACTIVE; queue++) {
+
+				if (queue > AR5K_TX_QUEUE_ID_DATA_MAX)
+					return -EINVAL;
+			}
+			break;
+		case AR5K_TX_QUEUE_UAPSD:
+			queue = AR5K_TX_QUEUE_ID_UAPSD;
+			break;
+		case AR5K_TX_QUEUE_BEACON:
+			queue = AR5K_TX_QUEUE_ID_BEACON;
+			break;
+		case AR5K_TX_QUEUE_CAB:
+			queue = AR5K_TX_QUEUE_ID_CAB;
+			break;
+		case AR5K_TX_QUEUE_XR_DATA:
+			if (ah->ah_version != AR5K_AR5212)
+				ATH5K_ERR(ah->ah_sc,
+					"XR data queues only supported in"
+					" 5212!\n");
+			queue = AR5K_TX_QUEUE_ID_XR_DATA;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	/*
+	 * Setup internal queue structure
+	 */
+	memset(&ah->ah_txq[queue], 0, sizeof(struct ath5k_txq_info));
+	ah->ah_txq[queue].tqi_type = queue_type;
+
+	if (queue_info != NULL) {
+		queue_info->tqi_type = queue_type;
+		ret = ath5k_hw_set_tx_queueprops(ah, queue, queue_info);
+		if (ret)
+			return ret;
+	}
+
+	/*
+	 * We use ah_txq_status to hold a temp value for
+	 * the Secondary interrupt mask registers on 5211+
+	 * check out ath5k_hw_reset_tx_queue
+	 */
+	AR5K_Q_ENABLE_BITS(ah->ah_txq_status, queue);
+
+	return queue;
+}
+
+/*
+ * Get number of pending frames
+ * for a specific queue [5211+]
+ */
+u32 ath5k_hw_num_tx_pending(struct ath5k_hw *ah, unsigned int queue)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	/* Return if queue is declared inactive */
+	if (ah->ah_txq[queue].tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return false;
+
+	/* XXX: How about AR5K_CFG_TXCNT ? */
+	if (ah->ah_version == AR5K_AR5210)
+		return false;
+
+	return AR5K_QUEUE_STATUS(queue) & AR5K_QCU_STS_FRMPENDCNT;
+}
+
+/*
+ * Set a transmit queue inactive
+ */
+void ath5k_hw_release_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (WARN_ON(queue >= ah->ah_capabilities.cap_queues.q_tx_num))
+		return;
+
+	/* This queue will be skipped in further operations */
+	ah->ah_txq[queue].tqi_type = AR5K_TX_QUEUE_INACTIVE;
+	/*For SIMR setup*/
+	AR5K_Q_DISABLE_BITS(ah->ah_txq_status, queue);
+}
+
+/*
+ * Set DFS properties for a transmit queue on DCU
+ */
+int ath5k_hw_reset_tx_queue(struct ath5k_hw *ah, unsigned int queue)
+{
+	u32 cw_min, cw_max, retry_lg, retry_sh;
+	struct ath5k_txq_info *tq = &ah->ah_txq[queue];
+
+	ATH5K_TRACE(ah->ah_sc);
+	AR5K_ASSERT_ENTRY(queue, ah->ah_capabilities.cap_queues.q_tx_num);
+
+	tq = &ah->ah_txq[queue];
+
+	if (tq->tqi_type == AR5K_TX_QUEUE_INACTIVE)
+		return 0;
+
+	if (ah->ah_version == AR5K_AR5210) {
+		/* Only handle data queues, others will be ignored */
+		if (tq->tqi_type != AR5K_TX_QUEUE_DATA)
+			return 0;
+
+		/* Set Slot time */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_SLOT_TIME_TURBO : AR5K_INIT_SLOT_TIME,
+			AR5K_SLOT_TIME);
+		/* Set ACK_CTS timeout */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_ACK_CTS_TIMEOUT_TURBO :
+			AR5K_INIT_ACK_CTS_TIMEOUT, AR5K_SLOT_TIME);
+		/* Set Transmit Latency */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_TRANSMIT_LATENCY_TURBO :
+			AR5K_INIT_TRANSMIT_LATENCY, AR5K_USEC_5210);
+
+		/* Set IFS0 */
+		if (ah->ah_turbo) {
+			 ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS_TURBO +
+				(ah->ah_aifs + tq->tqi_aifs) *
+				AR5K_INIT_SLOT_TIME_TURBO) <<
+				AR5K_IFS0_DIFS_S) | AR5K_INIT_SIFS_TURBO,
+				AR5K_IFS0);
+		} else {
+			ath5k_hw_reg_write(ah, ((AR5K_INIT_SIFS +
+				(ah->ah_aifs + tq->tqi_aifs) *
+				AR5K_INIT_SLOT_TIME) << AR5K_IFS0_DIFS_S) |
+				AR5K_INIT_SIFS, AR5K_IFS0);
+		}
+
+		/* Set IFS1 */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			AR5K_INIT_PROTO_TIME_CNTRL_TURBO :
+			AR5K_INIT_PROTO_TIME_CNTRL, AR5K_IFS1);
+		/* Set AR5K_PHY_SETTLING */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x38 :
+			(ath5k_hw_reg_read(ah, AR5K_PHY_SETTLING) & ~0x7F)
+			| 0x1C,
+			AR5K_PHY_SETTLING);
+		/* Set Frame Control Register */
+		ath5k_hw_reg_write(ah, ah->ah_turbo ?
+			(AR5K_PHY_FRAME_CTL_INI | AR5K_PHY_TURBO_MODE |
+			AR5K_PHY_TURBO_SHORT | 0x2020) :
+			(AR5K_PHY_FRAME_CTL_INI | 0x1020),
+			AR5K_PHY_FRAME_CTL_5210);
+	}
+
+	/*
+	 * Calculate cwmin/max by channel mode
+	 */
+	cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN;
+	cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX;
+	ah->ah_aifs = AR5K_TUNE_AIFS;
+	/*XR is only supported on 5212*/
+	if (IS_CHAN_XR(ah->ah_current_channel) &&
+			ah->ah_version == AR5K_AR5212) {
+		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_XR;
+		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_XR;
+		ah->ah_aifs = AR5K_TUNE_AIFS_XR;
+	/*B mode is not supported on 5210*/
+	} else if (IS_CHAN_B(ah->ah_current_channel) &&
+			ah->ah_version != AR5K_AR5210) {
+		cw_min = ah->ah_cw_min = AR5K_TUNE_CWMIN_11B;
+		cw_max = ah->ah_cw_max = AR5K_TUNE_CWMAX_11B;
+		ah->ah_aifs = AR5K_TUNE_AIFS_11B;
+	}
+
+	cw_min = 1;
+	while (cw_min < ah->ah_cw_min)
+		cw_min = (cw_min << 1) | 1;
+
+	cw_min = tq->tqi_cw_min < 0 ? (cw_min >> (-tq->tqi_cw_min)) :
+		((cw_min << tq->tqi_cw_min) + (1 << tq->tqi_cw_min) - 1);
+	cw_max = tq->tqi_cw_max < 0 ? (cw_max >> (-tq->tqi_cw_max)) :
+		((cw_max << tq->tqi_cw_max) + (1 << tq->tqi_cw_max) - 1);
+
+	/*
+	 * Calculate and set retry limits
+	 */
+	if (ah->ah_software_retry) {
+		/* XXX Need to test this */
+		retry_lg = ah->ah_limit_tx_retries;
+		retry_sh = retry_lg = retry_lg > AR5K_DCU_RETRY_LMT_SH_RETRY ?
+			AR5K_DCU_RETRY_LMT_SH_RETRY : retry_lg;
+	} else {
+		retry_lg = AR5K_INIT_LG_RETRY;
+		retry_sh = AR5K_INIT_SH_RETRY;
+	}
+
+	/*No QCU/DCU [5210]*/
+	if (ah->ah_version == AR5K_AR5210) {
+		ath5k_hw_reg_write(ah,
+			(cw_min << AR5K_NODCU_RETRY_LMT_CW_MIN_S)
+			| AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+				AR5K_NODCU_RETRY_LMT_SLG_RETRY)
+			| AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+				AR5K_NODCU_RETRY_LMT_SSH_RETRY)
+			| AR5K_REG_SM(retry_lg, AR5K_NODCU_RETRY_LMT_LG_RETRY)
+			| AR5K_REG_SM(retry_sh, AR5K_NODCU_RETRY_LMT_SH_RETRY),
+			AR5K_NODCU_RETRY_LMT);
+	} else {
+		/*QCU/DCU [5211+]*/
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(AR5K_INIT_SLG_RETRY,
+				AR5K_DCU_RETRY_LMT_SLG_RETRY) |
+			AR5K_REG_SM(AR5K_INIT_SSH_RETRY,
+				AR5K_DCU_RETRY_LMT_SSH_RETRY) |
+			AR5K_REG_SM(retry_lg, AR5K_DCU_RETRY_LMT_LG_RETRY) |
+			AR5K_REG_SM(retry_sh, AR5K_DCU_RETRY_LMT_SH_RETRY),
+			AR5K_QUEUE_DFS_RETRY_LIMIT(queue));
+
+	/*===Rest is also for QCU/DCU only [5211+]===*/
+
+		/*
+		 * Set initial content window (cw_min/cw_max)
+		 * and arbitrated interframe space (aifs)...
+		 */
+		ath5k_hw_reg_write(ah,
+			AR5K_REG_SM(cw_min, AR5K_DCU_LCL_IFS_CW_MIN) |
+			AR5K_REG_SM(cw_max, AR5K_DCU_LCL_IFS_CW_MAX) |
+			AR5K_REG_SM(ah->ah_aifs + tq->tqi_aifs,
+				AR5K_DCU_LCL_IFS_AIFS),
+			AR5K_QUEUE_DFS_LOCAL_IFS(queue));
+
+		/*
+		 * Set misc registers
+		 */
+		ath5k_hw_reg_write(ah, AR5K_QCU_MISC_DCU_EARLY,
+			AR5K_QUEUE_MISC(queue));
+
+		if (tq->tqi_cbr_period) {
+			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_cbr_period,
+				AR5K_QCU_CBRCFG_INTVAL) |
+				AR5K_REG_SM(tq->tqi_cbr_overflow_limit,
+				AR5K_QCU_CBRCFG_ORN_THRES),
+				AR5K_QUEUE_CBRCFG(queue));
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_FRSHED_CBR);
+			if (tq->tqi_cbr_overflow_limit)
+				AR5K_REG_ENABLE_BITS(ah,
+					AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_CBR_THRES_ENABLE);
+		}
+
+		if (tq->tqi_ready_time)
+			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_ready_time,
+				AR5K_QCU_RDYTIMECFG_INTVAL) |
+				AR5K_QCU_RDYTIMECFG_ENABLE,
+				AR5K_QUEUE_RDYTIMECFG(queue));
+
+		if (tq->tqi_burst_time) {
+			ath5k_hw_reg_write(ah, AR5K_REG_SM(tq->tqi_burst_time,
+				AR5K_DCU_CHAN_TIME_DUR) |
+				AR5K_DCU_CHAN_TIME_ENABLE,
+				AR5K_QUEUE_DFS_CHANNEL_TIME(queue));
+
+			if (tq->tqi_flags
+			& AR5K_TXQ_FLAG_RDYTIME_EXP_POLICY_ENABLE)
+				AR5K_REG_ENABLE_BITS(ah,
+					AR5K_QUEUE_MISC(queue),
+					AR5K_QCU_MISC_RDY_VEOL_POLICY);
+		}
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_BACKOFF_DISABLE)
+			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_POST_FR_BKOFF_DIS,
+				AR5K_QUEUE_DFS_MISC(queue));
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_FRAG_BURST_BACKOFF_ENABLE)
+			ath5k_hw_reg_write(ah, AR5K_DCU_MISC_BACKOFF_FRAG,
+				AR5K_QUEUE_DFS_MISC(queue));
+
+		/*
+		 * Set registers by queue type
+		 */
+		switch (tq->tqi_type) {
+		case AR5K_TX_QUEUE_BEACON:
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_FRSHED_DBA_GT |
+				AR5K_QCU_MISC_CBREXP_BCN |
+				AR5K_QCU_MISC_BCN_ENABLE);
+
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+				AR5K_DCU_MISC_ARBLOCK_CTL_S) |
+				AR5K_DCU_MISC_POST_FR_BKOFF_DIS |
+				AR5K_DCU_MISC_BCN_ENABLE);
+
+			ath5k_hw_reg_write(ah, ((AR5K_TUNE_BEACON_INTERVAL -
+				(AR5K_TUNE_SW_BEACON_RESP -
+				AR5K_TUNE_DMA_BEACON_RESP) -
+				AR5K_TUNE_ADDITIONAL_SWBA_BACKOFF) * 1024) |
+				AR5K_QCU_RDYTIMECFG_ENABLE,
+				AR5K_QUEUE_RDYTIMECFG(queue));
+			break;
+
+		case AR5K_TX_QUEUE_CAB:
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_FRSHED_DBA_GT |
+				AR5K_QCU_MISC_CBREXP |
+				AR5K_QCU_MISC_CBREXP_BCN);
+
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_DFS_MISC(queue),
+				(AR5K_DCU_MISC_ARBLOCK_CTL_GLOBAL <<
+				AR5K_DCU_MISC_ARBLOCK_CTL_S));
+			break;
+
+		case AR5K_TX_QUEUE_UAPSD:
+			AR5K_REG_ENABLE_BITS(ah, AR5K_QUEUE_MISC(queue),
+				AR5K_QCU_MISC_CBREXP);
+			break;
+
+		case AR5K_TX_QUEUE_DATA:
+		default:
+			break;
+		}
+
+		/*
+		 * Enable interrupts for this tx queue
+		 * in the secondary interrupt mask registers
+		 */
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXOKINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txok, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXERRINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txerr, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXURNINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txurn, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXDESCINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txdesc, queue);
+
+		if (tq->tqi_flags & AR5K_TXQ_FLAG_TXEOLINT_ENABLE)
+			AR5K_Q_ENABLE_BITS(ah->ah_txq_imr_txeol, queue);
+
+
+		/* Update secondary interrupt mask registers */
+		ah->ah_txq_imr_txok &= ah->ah_txq_status;
+		ah->ah_txq_imr_txerr &= ah->ah_txq_status;
+		ah->ah_txq_imr_txurn &= ah->ah_txq_status;
+		ah->ah_txq_imr_txdesc &= ah->ah_txq_status;
+		ah->ah_txq_imr_txeol &= ah->ah_txq_status;
+
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txok,
+			AR5K_SIMR0_QCU_TXOK) |
+			AR5K_REG_SM(ah->ah_txq_imr_txdesc,
+			AR5K_SIMR0_QCU_TXDESC), AR5K_SIMR0);
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txerr,
+			AR5K_SIMR1_QCU_TXERR) |
+			AR5K_REG_SM(ah->ah_txq_imr_txeol,
+			AR5K_SIMR1_QCU_TXEOL), AR5K_SIMR1);
+		ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txq_imr_txurn,
+			AR5K_SIMR2_QCU_TXURN), AR5K_SIMR2);
+	}
+
+	return 0;
+}
+
+/*
+ * Get slot time from DCU
+ */
+unsigned int ath5k_hw_get_slot_time(struct ath5k_hw *ah)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (ah->ah_version == AR5K_AR5210)
+		return ath5k_hw_clocktoh(ath5k_hw_reg_read(ah,
+				AR5K_SLOT_TIME) & 0xffff, ah->ah_turbo);
+	else
+		return ath5k_hw_reg_read(ah, AR5K_DCU_GBL_IFS_SLOT) & 0xffff;
+}
+
+/*
+ * Set slot time on DCU
+ */
+int ath5k_hw_set_slot_time(struct ath5k_hw *ah, unsigned int slot_time)
+{
+	ATH5K_TRACE(ah->ah_sc);
+	if (slot_time < AR5K_SLOT_TIME_9 || slot_time > AR5K_SLOT_TIME_MAX)
+		return -EINVAL;
+
+	if (ah->ah_version == AR5K_AR5210)
+		ath5k_hw_reg_write(ah, ath5k_hw_htoclock(slot_time,
+				ah->ah_turbo), AR5K_SLOT_TIME);
+	else
+		ath5k_hw_reg_write(ah, slot_time, AR5K_DCU_GBL_IFS_SLOT);
+
+	return 0;
+}
+

drivers/net/wireless/ath5k/reg.h

@@ -1,7 +1,7 @@
 /*
- * Copyright (c) 2007 Nick Kossifidis <mickflemm@gmail.com>
- * Copyright (c) 2004, 2005, 2006, 2007 Reyk Floeter <reyk@openbsd.org>
- * Copyright (c) 2007 Michael Taylor <mike.taylor@apprion.com>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2007-2008 Michael Taylor <mike.taylor@apprion.com>
  *
  * Permission to use, copy, modify, and distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -976,98 +976,6 @@
  */
 #define AR5K_EEPROM_BASE	0x6000
 
-/*
- * Common ar5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
- */
-#define AR5K_EEPROM_MAGIC		0x003d	/* EEPROM Magic number */
-#define AR5K_EEPROM_MAGIC_VALUE		0x5aa5	/* Default - found on EEPROM */
-#define AR5K_EEPROM_MAGIC_5212		0x0000145c /* 5212 */
-#define AR5K_EEPROM_MAGIC_5211		0x0000145b /* 5211 */
-#define AR5K_EEPROM_MAGIC_5210		0x0000145a /* 5210 */
-
-#define AR5K_EEPROM_PROTECT		0x003f	/* EEPROM protect status */
-#define AR5K_EEPROM_PROTECT_RD_0_31	0x0001	/* Read protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_WR_0_31	0x0002	/* Write protection bit for offsets 0x0 - 0x1f */
-#define AR5K_EEPROM_PROTECT_RD_32_63	0x0004	/* 0x20 - 0x3f */
-#define AR5K_EEPROM_PROTECT_WR_32_63	0x0008
-#define AR5K_EEPROM_PROTECT_RD_64_127	0x0010	/* 0x40 - 0x7f */
-#define AR5K_EEPROM_PROTECT_WR_64_127	0x0020
-#define AR5K_EEPROM_PROTECT_RD_128_191	0x0040	/* 0x80 - 0xbf (regdom) */
-#define AR5K_EEPROM_PROTECT_WR_128_191	0x0080
-#define AR5K_EEPROM_PROTECT_RD_192_207	0x0100	/* 0xc0 - 0xcf */
-#define AR5K_EEPROM_PROTECT_WR_192_207	0x0200
-#define AR5K_EEPROM_PROTECT_RD_208_223	0x0400	/* 0xd0 - 0xdf */
-#define AR5K_EEPROM_PROTECT_WR_208_223	0x0800
-#define AR5K_EEPROM_PROTECT_RD_224_239	0x1000	/* 0xe0 - 0xef */
-#define AR5K_EEPROM_PROTECT_WR_224_239	0x2000
-#define AR5K_EEPROM_PROTECT_RD_240_255	0x4000	/* 0xf0 - 0xff */
-#define AR5K_EEPROM_PROTECT_WR_240_255	0x8000
-#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
-#define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
-#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
-#define AR5K_EEPROM_INFO_CKSUM		0xffff
-#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
-
-#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)	/* EEPROM Version */
-#define AR5K_EEPROM_VERSION_3_0		0x3000	/* No idea what's going on before this version */
-#define AR5K_EEPROM_VERSION_3_1		0x3001	/* ob/db values for 2Ghz (ar5211_rfregs) */
-#define AR5K_EEPROM_VERSION_3_2		0x3002	/* different frequency representation (eeprom_bin2freq) */
-#define AR5K_EEPROM_VERSION_3_3		0x3003	/* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_3_4		0x3004	/* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
-#define AR5K_EEPROM_VERSION_4_0		0x4000	/* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_1		0x4001	/* has ee_margin_tx_rx (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_2		0x4002	/* has ee_cck_ofdm_gain_delta (eeprom_init) */
-#define AR5K_EEPROM_VERSION_4_3		0x4003
-#define AR5K_EEPROM_VERSION_4_4		0x4004
-#define AR5K_EEPROM_VERSION_4_5		0x4005
-#define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
-#define AR5K_EEPROM_VERSION_4_7		0x4007
-
-#define AR5K_EEPROM_MODE_11A		0
-#define AR5K_EEPROM_MODE_11B		1
-#define AR5K_EEPROM_MODE_11G		2
-
-#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
-#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
-#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
-#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2Ghz (?) */
-#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
-#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz (?) */
-#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
-
-#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
-#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
-#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
-#define AR5K_EEPROM_RFKILL_POLARITY_S	1
-
-/* Newer EEPROMs are using a different offset */
-#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
-	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
-
-#define AR5K_EEPROM_ANT_GAIN(_v)	AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
-#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)	((int8_t)(((_v) >> 8) & 0xff))
-#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)	((int8_t)((_v) & 0xff))
-
-/* calibration settings */
-#define AR5K_EEPROM_MODES_11A(_v)	AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
-#define AR5K_EEPROM_MODES_11B(_v)	AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
-#define AR5K_EEPROM_MODES_11G(_v)	AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
-#define AR5K_EEPROM_CTL(_v)		AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)	/* Conformance test limits */
-
-/* [3.1 - 3.3] */
-#define AR5K_EEPROM_OBDB0_2GHZ		0x00ec
-#define AR5K_EEPROM_OBDB1_2GHZ		0x00ed
-
-/* Misc values available since EEPROM 4.0 */
-#define AR5K_EEPROM_MISC0		0x00c4
-#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
-#define AR5K_EEPROM_MISC1		0x00c5
-#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
-
 /*
  * EEPROM data register
  */
@@ -1950,13 +1858,13 @@
 #define	AR5K_PHY_GAIN_OFFSET_RXTX_FLAG	0x00020000	/* RX-TX flag (?) */
 
 /*
- * Desired size register
+ * Desired ADC/PGA size register
  * (for more infos read ANI patent)
  */
 #define AR5K_PHY_DESIRED_SIZE		0x9850			/* Register Address */
 #define	AR5K_PHY_DESIRED_SIZE_ADC	0x000000ff	/* Mask for ADC desired size */
 #define	AR5K_PHY_DESIRED_SIZE_PGA	0x0000ff00	/* Mask for PGA desired size */
-#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size (?) */
+#define	AR5K_PHY_DESIRED_SIZE_TOT	0x0ff00000	/* Mask for Total desired size */
 
 /*
  * PHY signal register

drivers/net/wireless/ath5k/reset.c

@@ -0,0 +1,925 @@
+/*
+ * Copyright (c) 2004-2008 Reyk Floeter <reyk@openbsd.org>
+ * Copyright (c) 2006-2008 Nick Kossifidis <mickflemm@gmail.com>
+ * Copyright (c) 2007-2008 Luis Rodriguez <mcgrof@winlab.rutgers.edu>
+ * Copyright (c) 2007-2008 Pavel Roskin <proski@gnu.org>
+ * Copyright (c) 2007-2008 Jiri Slaby <jirislaby@gmail.com>
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#define _ATH5K_RESET
+
+/*****************************\
+  Reset functions and helpers
+\*****************************/
+
+#include <linux/pci.h>
+#include "ath5k.h"
+#include "reg.h"
+#include "base.h"
+#include "debug.h"
+
+/**
+ * ath5k_hw_write_ofdm_timings - set OFDM timings on AR5212
+ *
+ * @ah: the &struct ath5k_hw
+ * @channel: the currently set channel upon reset
+ *
+ * Write the OFDM timings for the AR5212 upon reset. This is a helper for
+ * ath5k_hw_reset(). This seems to tune the PLL a specified frequency
+ * depending on the bandwidth of the channel.
+ *
+ */
+static inline int ath5k_hw_write_ofdm_timings(struct ath5k_hw *ah,
+	struct ieee80211_channel *channel)
+{
+	/* Get exponent and mantissa and set it */
+	u32 coef_scaled, coef_exp, coef_man,
+		ds_coef_exp, ds_coef_man, clock;
+
+	if (!(ah->ah_version == AR5K_AR5212) ||
+		!(channel->hw_value & CHANNEL_OFDM))
+		BUG();
+
+	/* Seems there are two PLLs, one for baseband sampling and one
+	 * for tuning. Tuning basebands are 40 MHz or 80MHz when in
+	 * turbo. */
+	clock = channel->hw_value & CHANNEL_TURBO ? 80 : 40;
+	coef_scaled = ((5 * (clock << 24)) / 2) /
+	channel->center_freq;
+
+	for (coef_exp = 31; coef_exp > 0; coef_exp--)
+		if ((coef_scaled >> coef_exp) & 0x1)
+			break;
+
+	if (!coef_exp)
+		return -EINVAL;
+
+	coef_exp = 14 - (coef_exp - 24);
+	coef_man = coef_scaled +
+		(1 << (24 - coef_exp - 1));
+	ds_coef_man = coef_man >> (24 - coef_exp);
+	ds_coef_exp = coef_exp - 16;
+
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_MAN, ds_coef_man);
+	AR5K_REG_WRITE_BITS(ah, AR5K_PHY_TIMING_3,
+		AR5K_PHY_TIMING_3_DSC_EXP, ds_coef_exp);
+
+	return 0;
+}
+
+
+/*
+ * index into rates for control rates, we can set it up like this because
+ * this is only used for AR5212 and we know it supports G mode
+ */
+static int control_rates[] =
+	{ 0, 1, 1, 1, 4, 4, 6, 6, 8, 8, 8, 8 };
+
+/**
+ * ath5k_hw_write_rate_duration - set rate duration during hw resets
+ *
+ * @ah: the &struct ath5k_hw
+ * @mode: one of enum ath5k_driver_mode
+ *
+ * Write the rate duration table upon hw reset. This is a helper for
+ * ath5k_hw_reset(). It seems all this is doing is setting an ACK timeout for
+ * the hardware for the current mode for each rate. The rates which are capable
+ * of short preamble (802.11b rates 2Mbps, 5.5Mbps, and 11Mbps) have another
+ * register for the short preamble ACK timeout calculation.
+ */
+static inline void ath5k_hw_write_rate_duration(struct ath5k_hw *ah,
+       unsigned int mode)
+{
+	struct ath5k_softc *sc = ah->ah_sc;
+	struct ieee80211_rate *rate;
+	unsigned int i;
+
+	/* Write rate duration table */
+	for (i = 0; i < sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates; i++) {
+		u32 reg;
+		u16 tx_time;
+
+		rate = &sc->sbands[IEEE80211_BAND_2GHZ].bitrates[control_rates[i]];
+
+		/* Set ACK timeout */
+		reg = AR5K_RATE_DUR(rate->hw_value);
+
+		/* An ACK frame consists of 10 bytes. If you add the FCS,
+		 * which ieee80211_generic_frame_duration() adds,
+		 * its 14 bytes. Note we use the control rate and not the
+		 * actual rate for this rate. See mac80211 tx.c
+		 * ieee80211_duration() for a brief description of
+		 * what rate we should choose to TX ACKs. */
+		tx_time = le16_to_cpu(ieee80211_generic_frame_duration(sc->hw,
+							sc->vif, 10, rate));
+
+		ath5k_hw_reg_write(ah, tx_time, reg);
+
+		if (!(rate->flags & IEEE80211_RATE_SHORT_PREAMBLE))
+			continue;
+
+		/*
+		 * We're not distinguishing short preamble here,
+		 * This is true, all we'll get is a longer value here
+		 * which is not necessarilly bad. We could use
+		 * export ieee80211_frame_duration() but that needs to be
+		 * fixed first to be properly used by mac802111 drivers:
+		 *
+		 *  - remove erp stuff and let the routine figure ofdm
+		 *    erp rates
+		 *  - remove passing argument ieee80211_local as
+		 *    drivers don't have access to it
+		 *  - move drivers using ieee80211_generic_frame_duration()
+		 *    to this
+		 */
+		ath5k_hw_reg_write(ah, tx_time,
+			reg + (AR5K_SET_SHORT_PREAMBLE << 2));
+	}
+}
+
+/*
+ * Reset chipset
+ */
+static int ath5k_hw_nic_reset(struct ath5k_hw *ah, u32 val)
+{
+	int ret;
+	u32 mask = val ? val : ~0U;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Read-and-clear RX Descriptor Pointer*/
+	ath5k_hw_reg_read(ah, AR5K_RXDP);
+
+	/*
+	 * Reset the device and wait until success
+	 */
+	ath5k_hw_reg_write(ah, val, AR5K_RESET_CTL);
+
+	/* Wait at least 128 PCI clocks */
+	udelay(15);
+
+	if (ah->ah_version == AR5K_AR5210) {
+		val &= AR5K_RESET_CTL_CHIP;
+		mask &= AR5K_RESET_CTL_CHIP;
+	} else {
+		val &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+		mask &= AR5K_RESET_CTL_PCU | AR5K_RESET_CTL_BASEBAND;
+	}
+
+	ret = ath5k_hw_register_timeout(ah, AR5K_RESET_CTL, mask, val, false);
+
+	/*
+	 * Reset configuration register (for hw byte-swap). Note that this
+	 * is only set for big endian. We do the necessary magic in
+	 * AR5K_INIT_CFG.
+	 */
+	if ((val & AR5K_RESET_CTL_PCU) == 0)
+		ath5k_hw_reg_write(ah, AR5K_INIT_CFG, AR5K_CFG);
+
+	return ret;
+}
+
+/*
+ * Sleep control
+ */
+int ath5k_hw_set_power(struct ath5k_hw *ah, enum ath5k_power_mode mode,
+		bool set_chip, u16 sleep_duration)
+{
+	unsigned int i;
+	u32 staid, data;
+
+	ATH5K_TRACE(ah->ah_sc);
+	staid = ath5k_hw_reg_read(ah, AR5K_STA_ID1);
+
+	switch (mode) {
+	case AR5K_PM_AUTO:
+		staid &= ~AR5K_STA_ID1_DEFAULT_ANTENNA;
+		/* fallthrough */
+	case AR5K_PM_NETWORK_SLEEP:
+		if (set_chip)
+			ath5k_hw_reg_write(ah,
+				AR5K_SLEEP_CTL_SLE_ALLOW |
+				sleep_duration,
+				AR5K_SLEEP_CTL);
+
+		staid |= AR5K_STA_ID1_PWR_SV;
+		break;
+
+	case AR5K_PM_FULL_SLEEP:
+		if (set_chip)
+			ath5k_hw_reg_write(ah, AR5K_SLEEP_CTL_SLE_SLP,
+				AR5K_SLEEP_CTL);
+
+		staid |= AR5K_STA_ID1_PWR_SV;
+		break;
+
+	case AR5K_PM_AWAKE:
+
+		staid &= ~AR5K_STA_ID1_PWR_SV;
+
+		if (!set_chip)
+			goto commit;
+
+		/* Preserve sleep duration */
+		data = ath5k_hw_reg_read(ah, AR5K_SLEEP_CTL);
+		if (data & 0xffc00000)
+			data = 0;
+		else
+			data = data & 0xfffcffff;
+
+		ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		udelay(15);
+
+		for (i = 50; i > 0; i--) {
+			/* Check if the chip did wake up */
+			if ((ath5k_hw_reg_read(ah, AR5K_PCICFG) &
+					AR5K_PCICFG_SPWR_DN) == 0)
+				break;
+
+			/* Wait a bit and retry */
+			udelay(200);
+			ath5k_hw_reg_write(ah, data, AR5K_SLEEP_CTL);
+		}
+
+		/* Fail if the chip didn't wake up */
+		if (i <= 0)
+			return -EIO;
+
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+commit:
+	ah->ah_power_mode = mode;
+	ath5k_hw_reg_write(ah, staid, AR5K_STA_ID1);
+
+	return 0;
+}
+
+/*
+ * Bring up MAC + PHY Chips
+ */
+int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
+{
+	struct pci_dev *pdev = ah->ah_sc->pdev;
+	u32 turbo, mode, clock, bus_flags;
+	int ret;
+
+	turbo = 0;
+	mode = 0;
+	clock = 0;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	/* Wakeup the device */
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to wakeup the MAC Chip\n");
+		return ret;
+	}
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/*
+		 * Get channel mode flags
+		 */
+
+		if (ah->ah_radio >= AR5K_RF5112) {
+			mode = AR5K_PHY_MODE_RAD_RF5112;
+			clock = AR5K_PHY_PLL_RF5112;
+		} else {
+			mode = AR5K_PHY_MODE_RAD_RF5111;	/*Zero*/
+			clock = AR5K_PHY_PLL_RF5111;		/*Zero*/
+		}
+
+		if (flags & CHANNEL_2GHZ) {
+			mode |= AR5K_PHY_MODE_FREQ_2GHZ;
+			clock |= AR5K_PHY_PLL_44MHZ;
+
+			if (flags & CHANNEL_CCK) {
+				mode |= AR5K_PHY_MODE_MOD_CCK;
+			} else if (flags & CHANNEL_OFDM) {
+				/* XXX Dynamic OFDM/CCK is not supported by the
+				 * AR5211 so we set MOD_OFDM for plain g (no
+				 * CCK headers) operation. We need to test
+				 * this, 5211 might support ofdm-only g after
+				 * all, there are also initial register values
+				 * in the code for g mode (see initvals.c). */
+				if (ah->ah_version == AR5K_AR5211)
+					mode |= AR5K_PHY_MODE_MOD_OFDM;
+				else
+					mode |= AR5K_PHY_MODE_MOD_DYN;
+			} else {
+				ATH5K_ERR(ah->ah_sc,
+					"invalid radio modulation mode\n");
+				return -EINVAL;
+			}
+		} else if (flags & CHANNEL_5GHZ) {
+			mode |= AR5K_PHY_MODE_FREQ_5GHZ;
+			clock |= AR5K_PHY_PLL_40MHZ;
+
+			if (flags & CHANNEL_OFDM)
+				mode |= AR5K_PHY_MODE_MOD_OFDM;
+			else {
+				ATH5K_ERR(ah->ah_sc,
+					"invalid radio modulation mode\n");
+				return -EINVAL;
+			}
+		} else {
+			ATH5K_ERR(ah->ah_sc, "invalid radio frequency mode\n");
+			return -EINVAL;
+		}
+
+		if (flags & CHANNEL_TURBO)
+			turbo = AR5K_PHY_TURBO_MODE | AR5K_PHY_TURBO_SHORT;
+	} else { /* Reset the device */
+
+		/* ...enable Atheros turbo mode if requested */
+		if (flags & CHANNEL_TURBO)
+			ath5k_hw_reg_write(ah, AR5K_PHY_TURBO_MODE,
+					AR5K_PHY_TURBO);
+	}
+
+	/* reseting PCI on PCI-E cards results card to hang
+	 * and always return 0xffff... so we ingore that flag
+	 * for PCI-E cards */
+	bus_flags = (pdev->is_pcie) ? 0 : AR5K_RESET_CTL_PCI;
+
+	/* Reset chipset */
+	ret = ath5k_hw_nic_reset(ah, AR5K_RESET_CTL_PCU |
+		AR5K_RESET_CTL_BASEBAND | bus_flags);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	if (ah->ah_version == AR5K_AR5210)
+		udelay(2300);
+
+	/* ...wakeup again!*/
+	ret = ath5k_hw_set_power(ah, AR5K_PM_AWAKE, true, 0);
+	if (ret) {
+		ATH5K_ERR(ah->ah_sc, "failed to resume the MAC Chip\n");
+		return ret;
+	}
+
+	/* ...final warm reset */
+	if (ath5k_hw_nic_reset(ah, 0)) {
+		ATH5K_ERR(ah->ah_sc, "failed to warm reset the MAC Chip\n");
+		return -EIO;
+	}
+
+	if (ah->ah_version != AR5K_AR5210) {
+		/* ...set the PHY operating mode */
+		ath5k_hw_reg_write(ah, clock, AR5K_PHY_PLL);
+		udelay(300);
+
+		ath5k_hw_reg_write(ah, mode, AR5K_PHY_MODE);
+		ath5k_hw_reg_write(ah, turbo, AR5K_PHY_TURBO);
+	}
+
+	return 0;
+}
+
+/*
+ * Main reset function
+ */
+int ath5k_hw_reset(struct ath5k_hw *ah, enum ieee80211_if_types op_mode,
+	struct ieee80211_channel *channel, bool change_channel)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	struct pci_dev *pdev = ah->ah_sc->pdev;
+	u32 data, s_seq, s_ant, s_led[3], dma_size;
+	unsigned int i, mode, freq, ee_mode, ant[2];
+	int ret;
+
+	ATH5K_TRACE(ah->ah_sc);
+
+	s_seq = 0;
+	s_ant = 0;
+	ee_mode = 0;
+	freq = 0;
+	mode = 0;
+
+	/*
+	 * Save some registers before a reset
+	 */
+	/*DCU/Antenna selection not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+		if (change_channel) {
+			/* Seq number for queue 0 -do this for all queues ? */
+			s_seq = ath5k_hw_reg_read(ah,
+					AR5K_QUEUE_DFS_SEQNUM(0));
+			/*Default antenna*/
+			s_ant = ath5k_hw_reg_read(ah, AR5K_DEFAULT_ANTENNA);
+		}
+	}
+
+	/*GPIOs*/
+	s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) & AR5K_PCICFG_LEDSTATE;
+	s_led[1] = ath5k_hw_reg_read(ah, AR5K_GPIOCR);
+	s_led[2] = ath5k_hw_reg_read(ah, AR5K_GPIODO);
+
+	if (change_channel && ah->ah_rf_banks != NULL)
+		ath5k_hw_get_rf_gain(ah);
+
+
+	/*Wakeup the device*/
+	ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
+	if (ret)
+		return ret;
+
+	/*
+	 * Initialize operating mode
+	 */
+	ah->ah_op_mode = op_mode;
+
+	/*
+	 * 5111/5112 Settings
+	 * 5210 only comes with RF5110
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		if (ah->ah_radio != AR5K_RF5111 &&
+			ah->ah_radio != AR5K_RF5112 &&
+			ah->ah_radio != AR5K_RF5413 &&
+			ah->ah_radio != AR5K_RF2413 &&
+			ah->ah_radio != AR5K_RF2425) {
+			ATH5K_ERR(ah->ah_sc,
+				"invalid phy radio: %u\n", ah->ah_radio);
+			return -EINVAL;
+		}
+
+		switch (channel->hw_value & CHANNEL_MODES) {
+		case CHANNEL_A:
+			mode = AR5K_MODE_11A;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		case CHANNEL_G:
+			mode = AR5K_MODE_11G;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		case CHANNEL_B:
+			mode = AR5K_MODE_11B;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11B;
+			break;
+		case CHANNEL_T:
+			mode = AR5K_MODE_11A_TURBO;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		/*Is this ok on 5211 too ?*/
+		case CHANNEL_TG:
+			mode = AR5K_MODE_11G_TURBO;
+			freq = AR5K_INI_RFGAIN_2GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11G;
+			break;
+		case CHANNEL_XR:
+			if (ah->ah_version == AR5K_AR5211) {
+				ATH5K_ERR(ah->ah_sc,
+					"XR mode not available on 5211");
+				return -EINVAL;
+			}
+			mode = AR5K_MODE_XR;
+			freq = AR5K_INI_RFGAIN_5GHZ;
+			ee_mode = AR5K_EEPROM_MODE_11A;
+			break;
+		default:
+			ATH5K_ERR(ah->ah_sc,
+				"invalid channel: %d\n", channel->center_freq);
+			return -EINVAL;
+		}
+
+		/* PHY access enable */
+		ath5k_hw_reg_write(ah, AR5K_PHY_SHIFT_5GHZ, AR5K_PHY(0));
+
+	}
+
+	ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+	if (ret)
+		return ret;
+
+	/*
+	 * 5211/5212 Specific
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		/*
+		 * Write initial RF gain settings
+		 * This should work for both 5111/5112
+		 */
+		ret = ath5k_hw_rfgain(ah, freq);
+		if (ret)
+			return ret;
+
+		mdelay(1);
+
+		/*
+		 * Write some more initial register settings
+		 */
+		if (ah->ah_version == AR5K_AR5212) {
+			ath5k_hw_reg_write(ah, 0x0002a002, 0x982c);
+
+			if (channel->hw_value == CHANNEL_G)
+				if (ah->ah_mac_srev < AR5K_SREV_VER_AR2413)
+					ath5k_hw_reg_write(ah, 0x00f80d80,
+								0x994c);
+				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2424)
+					ath5k_hw_reg_write(ah, 0x00380140,
+								0x994c);
+				else if (ah->ah_mac_srev < AR5K_SREV_VER_AR2425)
+					ath5k_hw_reg_write(ah, 0x00fc0ec0,
+								0x994c);
+				else /* 2425 */
+					ath5k_hw_reg_write(ah, 0x00fc0fc0,
+								0x994c);
+			else
+				ath5k_hw_reg_write(ah, 0x00000000, 0x994c);
+
+			/* Some bits are disabled here, we know nothing about
+			 * register 0xa228 yet, most of the times this ends up
+			 * with a value 0x9b5 -haven't seen any dump with
+			 * a different value- */
+			/* Got this from decompiling binary HAL */
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffffdff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+
+			data = ath5k_hw_reg_read(ah, 0xa228);
+			data &= 0xfffe03ff;
+			ath5k_hw_reg_write(ah, data, 0xa228);
+			data = 0;
+
+			/* Just write 0x9b5 ? */
+			/* ath5k_hw_reg_write(ah, 0x000009b5, 0xa228); */
+			ath5k_hw_reg_write(ah, 0x0000000f, AR5K_SEQ_MASK);
+			ath5k_hw_reg_write(ah, 0x00000000, 0xa254);
+			ath5k_hw_reg_write(ah, 0x0000000e, AR5K_PHY_SCAL);
+		}
+
+		/* Fix for first revision of the RF5112 RF chipset */
+		if (ah->ah_radio >= AR5K_RF5112 &&
+				ah->ah_radio_5ghz_revision <
+				AR5K_SREV_RAD_5112A) {
+			ath5k_hw_reg_write(ah, AR5K_PHY_CCKTXCTL_WORLD,
+					AR5K_PHY_CCKTXCTL);
+			if (channel->hw_value & CHANNEL_5GHZ)
+				data = 0xffb81020;
+			else
+				data = 0xffb80d20;
+			ath5k_hw_reg_write(ah, data, AR5K_PHY_FRAME_CTL);
+			data = 0;
+		}
+
+		/*
+		 * Set TX power (FIXME)
+		 */
+		ret = ath5k_hw_txpower(ah, channel, AR5K_TUNE_DEFAULT_TXPOWER);
+		if (ret)
+			return ret;
+
+		/* Write rate duration table only on AR5212 and if
+		 * virtual interface has already been brought up
+		 * XXX: rethink this after new mode changes to
+		 * mac80211 are integrated */
+		if (ah->ah_version == AR5K_AR5212 &&
+			ah->ah_sc->vif != NULL)
+			ath5k_hw_write_rate_duration(ah, mode);
+
+		/*
+		 * Write RF registers
+		 */
+		ret = ath5k_hw_rfregs(ah, channel, mode);
+		if (ret)
+			return ret;
+
+		/*
+		 * Configure additional registers
+		 */
+
+		/* Write OFDM timings on 5212*/
+		if (ah->ah_version == AR5K_AR5212 &&
+			channel->hw_value & CHANNEL_OFDM) {
+			ret = ath5k_hw_write_ofdm_timings(ah, channel);
+			if (ret)
+				return ret;
+		}
+
+		/*Enable/disable 802.11b mode on 5111
+		(enable 2111 frequency converter + CCK)*/
+		if (ah->ah_radio == AR5K_RF5111) {
+			if (mode == AR5K_MODE_11B)
+				AR5K_REG_ENABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+			else
+				AR5K_REG_DISABLE_BITS(ah, AR5K_TXCFG,
+				    AR5K_TXCFG_B_MODE);
+		}
+
+		/*
+		 * Set channel and calibrate the PHY
+		 */
+		ret = ath5k_hw_channel(ah, channel);
+		if (ret)
+			return ret;
+
+		/* Set antenna mode */
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_ANT_CTL,
+			ah->ah_antenna[ee_mode][0], 0xfffffc06);
+
+		/*
+		 * In case a fixed antenna was set as default
+		 * write the same settings on both AR5K_PHY_ANT_SWITCH_TABLE
+		 * registers.
+		 */
+		if (s_ant != 0) {
+			if (s_ant == AR5K_ANT_FIXED_A) /* 1 - Main */
+				ant[0] = ant[1] = AR5K_ANT_FIXED_A;
+			else	/* 2 - Aux */
+				ant[0] = ant[1] = AR5K_ANT_FIXED_B;
+		} else {
+			ant[0] = AR5K_ANT_FIXED_A;
+			ant[1] = AR5K_ANT_FIXED_B;
+		}
+
+		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[0]],
+			AR5K_PHY_ANT_SWITCH_TABLE_0);
+		ath5k_hw_reg_write(ah, ah->ah_antenna[ee_mode][ant[1]],
+			AR5K_PHY_ANT_SWITCH_TABLE_1);
+
+		/* Commit values from EEPROM */
+		if (ah->ah_radio == AR5K_RF5111)
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_FRAME_CTL,
+			    AR5K_PHY_FRAME_CTL_TX_CLIP, ee->ee_tx_clip);
+
+		ath5k_hw_reg_write(ah,
+			AR5K_PHY_NF_SVAL(ee->ee_noise_floor_thr[ee_mode]),
+			AR5K_PHY_NFTHRES);
+
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_SETTLING,
+			(ee->ee_switch_settling[ee_mode] << 7) & 0x3f80,
+			0xffffc07f);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_GAIN,
+			(ee->ee_ant_tx_rx[ee_mode] << 12) & 0x3f000,
+			0xfffc0fff);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_DESIRED_SIZE,
+			(ee->ee_adc_desired_size[ee_mode] & 0x00ff) |
+			((ee->ee_pga_desired_size[ee_mode] << 8) & 0xff00),
+			0xffff0000);
+
+		ath5k_hw_reg_write(ah,
+			(ee->ee_tx_end2xpa_disable[ee_mode] << 24) |
+			(ee->ee_tx_end2xpa_disable[ee_mode] << 16) |
+			(ee->ee_tx_frm2xpa_enable[ee_mode] << 8) |
+			(ee->ee_tx_frm2xpa_enable[ee_mode]), AR5K_PHY_RF_CTL4);
+
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_RF_CTL3,
+			ee->ee_tx_end2xlna_enable[ee_mode] << 8, 0xffff00ff);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_NF,
+			(ee->ee_thr_62[ee_mode] << 12) & 0x7f000, 0xfff80fff);
+		AR5K_REG_MASKED_BITS(ah, AR5K_PHY_OFDM_SELFCORR, 4, 0xffffff01);
+
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+		    AR5K_PHY_IQ_CORR_ENABLE |
+		    (ee->ee_i_cal[ee_mode] << AR5K_PHY_IQ_CORR_Q_I_COFF_S) |
+		    ee->ee_q_cal[ee_mode]);
+
+		if (ah->ah_ee_version >= AR5K_EEPROM_VERSION_4_1)
+			AR5K_REG_WRITE_BITS(ah, AR5K_PHY_GAIN_2GHZ,
+				AR5K_PHY_GAIN_2GHZ_MARGIN_TXRX,
+				ee->ee_margin_tx_rx[ee_mode]);
+
+	} else {
+		mdelay(1);
+		/* Disable phy and wait */
+		ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
+		mdelay(1);
+	}
+
+	/*
+	 * Restore saved values
+	 */
+	/*DCU/Antenna selection not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+		ath5k_hw_reg_write(ah, s_seq, AR5K_QUEUE_DFS_SEQNUM(0));
+		ath5k_hw_reg_write(ah, s_ant, AR5K_DEFAULT_ANTENNA);
+	}
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PCICFG, s_led[0]);
+	ath5k_hw_reg_write(ah, s_led[1], AR5K_GPIOCR);
+	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
+
+	/*
+	 * Misc
+	 */
+	/* XXX: add ah->aid once mac80211 gives this to us */
+	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+
+	ath5k_hw_set_opmode(ah);
+	/*PISR/SISR Not available on 5210*/
+	if (ah->ah_version != AR5K_AR5210) {
+		ath5k_hw_reg_write(ah, 0xffffffff, AR5K_PISR);
+		/* If we later allow tuning for this, store into sc structure */
+		data = AR5K_TUNE_RSSI_THRES |
+			AR5K_TUNE_BMISS_THRES << AR5K_RSSI_THR_BMISS_S;
+		ath5k_hw_reg_write(ah, data, AR5K_RSSI_THR);
+	}
+
+	/*
+	 * Set Rx/Tx DMA Configuration
+	 *
+	 * Set maximum DMA size (512) except for PCI-E cards since
+	 * it causes rx overruns and tx errors (tested on 5424 but since
+	 * rx overruns also occur on 5416/5418 with madwifi we set 128
+	 * for all PCI-E cards to be safe).
+	 *
+	 * In dumps this is 128 for allchips.
+	 *
+	 * XXX: need to check 5210 for this
+	 * TODO: Check out tx triger level, it's always 64 on dumps but I
+	 * guess we can tweak it and see how it goes ;-)
+	 */
+	dma_size = (pdev->is_pcie) ? AR5K_DMASIZE_128B : AR5K_DMASIZE_512B;
+	if (ah->ah_version != AR5K_AR5210) {
+		AR5K_REG_WRITE_BITS(ah, AR5K_TXCFG,
+			AR5K_TXCFG_SDMAMR, dma_size);
+		AR5K_REG_WRITE_BITS(ah, AR5K_RXCFG,
+			AR5K_RXCFG_SDMAMW, dma_size);
+	}
+
+	/*
+	 * Enable the PHY and wait until completion
+	 */
+	ath5k_hw_reg_write(ah, AR5K_PHY_ACT_ENABLE, AR5K_PHY_ACT);
+
+	/*
+	 * On 5211+ read activation -> rx delay
+	 * and use it.
+	 */
+	if (ah->ah_version != AR5K_AR5210) {
+		data = ath5k_hw_reg_read(ah, AR5K_PHY_RX_DELAY) &
+			AR5K_PHY_RX_DELAY_M;
+		data = (channel->hw_value & CHANNEL_CCK) ?
+			((data << 2) / 22) : (data / 10);
+
+		udelay(100 + (2 * data));
+		data = 0;
+	} else {
+		mdelay(1);
+	}
+
+	/*
+	 * Perform ADC test (?)
+	 */
+	data = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+	ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+	for (i = 0; i <= 20; i++) {
+		if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+			break;
+		udelay(200);
+	}
+	ath5k_hw_reg_write(ah, data, AR5K_PHY_TST1);
+	data = 0;
+
+	/*
+	 * Start automatic gain calibration
+	 *
+	 * During AGC calibration RX path is re-routed to
+	 * a signal detector so we don't receive anything.
+	 *
+	 * This method is used to calibrate some static offsets
+	 * used together with on-the fly I/Q calibration (the
+	 * one performed via ath5k_hw_phy_calibrate), that doesn't
+	 * interrupt rx path.
+	 *
+	 * If we are in a noisy environment AGC calibration may time
+	 * out.
+	 */
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+				AR5K_PHY_AGCCTL_CAL);
+
+	/* At the same time start I/Q calibration for QAM constellation
+	 * -no need for CCK- */
+	ah->ah_calibration = false;
+	if (!(mode == AR5K_MODE_11B)) {
+		ah->ah_calibration = true;
+		AR5K_REG_WRITE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_CAL_NUM_LOG_MAX, 15);
+		AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_IQ,
+				AR5K_PHY_IQ_RUN);
+	}
+
+	/* Wait for gain calibration to finish (we check for I/Q calibration
+	 * during ath5k_phy_calibrate) */
+	if (ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
+			AR5K_PHY_AGCCTL_CAL, 0, false)) {
+		ATH5K_ERR(ah->ah_sc, "gain calibration timeout (%uMHz)\n",
+			channel->center_freq);
+		return -EAGAIN;
+	}
+
+	/*
+	 * Start noise floor calibration
+	 *
+	 * If we run NF calibration before AGC, it always times out.
+	 * Binary HAL starts NF and AGC calibration at the same time
+	 * and only waits for AGC to finish. I believe that's wrong because
+	 * during NF calibration, rx path is also routed to a detector, so if
+	 * it doesn't finish we won't have RX.
+	 *
+	 * XXX: Find an interval that's OK for all cards...
+	 */
+	ret = ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	if (ret)
+		return ret;
+
+	/*
+	 * Reset queues and start beacon timers at the end of the reset routine
+	 */
+	for (i = 0; i < ah->ah_capabilities.cap_queues.q_tx_num; i++) {
+		/*No QCU on 5210*/
+		if (ah->ah_version != AR5K_AR5210)
+			AR5K_REG_WRITE_Q(ah, AR5K_QUEUE_QCUMASK(i), i);
+
+		ret = ath5k_hw_reset_tx_queue(ah, i);
+		if (ret) {
+			ATH5K_ERR(ah->ah_sc,
+				"failed to reset TX queue #%d\n", i);
+			return ret;
+		}
+	}
+
+	/* Pre-enable interrupts on 5211/5212*/
+	if (ah->ah_version != AR5K_AR5210)
+		ath5k_hw_set_imr(ah, AR5K_INT_RX | AR5K_INT_TX |
+				AR5K_INT_FATAL);
+
+	/*
+	 * Set RF kill flags if supported by the device (read from the EEPROM)
+	 * Disable gpio_intr for now since it results system hang.
+	 * TODO: Handle this in ath5k_intr
+	 */
+#if 0
+	if (AR5K_EEPROM_HDR_RFKILL(ah->ah_capabilities.cap_eeprom.ee_header)) {
+		ath5k_hw_set_gpio_input(ah, 0);
+		ah->ah_gpio[0] = ath5k_hw_get_gpio(ah, 0);
+		if (ah->ah_gpio[0] == 0)
+			ath5k_hw_set_gpio_intr(ah, 0, 1);
+		else
+			ath5k_hw_set_gpio_intr(ah, 0, 0);
+	}
+#endif
+
+	/*
+	 * Set the 32MHz reference clock on 5212 phy clock sleep register
+	 *
+	 * TODO: Find out how to switch to external 32Khz clock to save power
+	 */
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCR_32MHZ, AR5K_PHY_SCR);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SLMT_32MHZ, AR5K_PHY_SLMT);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCAL_32MHZ, AR5K_PHY_SCAL);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SCLOCK_32MHZ, AR5K_PHY_SCLOCK);
+		ath5k_hw_reg_write(ah, AR5K_PHY_SDELAY_32MHZ, AR5K_PHY_SDELAY);
+		ath5k_hw_reg_write(ah, ah->ah_phy_spending, AR5K_PHY_SPENDING);
+
+		data = ath5k_hw_reg_read(ah, AR5K_USEC_5211) & 0xffffc07f ;
+		data |= (ah->ah_phy_spending == AR5K_PHY_SPENDING_18) ?
+						0x00000f80 : 0x00001380 ;
+		ath5k_hw_reg_write(ah, data, AR5K_USEC_5211);
+		data = 0;
+	}
+
+	if (ah->ah_version == AR5K_AR5212) {
+		ath5k_hw_reg_write(ah, 0x000100aa, 0x8118);
+		ath5k_hw_reg_write(ah, 0x00003210, 0x811c);
+		ath5k_hw_reg_write(ah, 0x00000052, 0x8108);
+		if (ah->ah_mac_srev >= AR5K_SREV_VER_AR2413)
+			ath5k_hw_reg_write(ah, 0x00000004, 0x8120);
+	}
+
+	/*
+	 * Disable beacons and reset the register
+	 */
+	AR5K_REG_DISABLE_BITS(ah, AR5K_BEACON, AR5K_BEACON_ENABLE |
+			AR5K_BEACON_RESET_TSF);
+
+	return 0;
+}
+
+#undef _ATH5K_RESET

drivers/net/wireless/ath9k/Kconfig

@@ -1,6 +1,9 @@
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
+	select MAC80211_LEDS
+	select LEDS_CLASS
+	select NEW_LEDS
 	---help---
 	  This module adds support for wireless adapters based on
 	  Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.

drivers/net/wireless/ath9k/main.c

@@ -1482,6 +1482,11 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		IEEE80211_HW_SIGNAL_DBM |
 		IEEE80211_HW_NOISE_DBM;
 
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
+
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 	pci_set_drvdata(pdev, hw);
 

drivers/net/wireless/b43/Kconfig

@@ -80,6 +80,18 @@ config B43_NPHY
 
 	  SAY N.
 
+config B43_PHY_LP
+	bool "IEEE 802.11g LP-PHY support (BROKEN)"
+	depends on B43 && EXPERIMENTAL && BROKEN
+	---help---
+	  Support for the LP-PHY.
+	  The LP-PHY is an IEEE 802.11g based PHY built into some notebooks
+	  and embedded devices.
+
+	  THIS IS BROKEN AND DOES NOT WORK YET.
+
+	  SAY N.
+
 # This config option automatically enables b43 LEDS support,
 # if it's possible.
 config B43_LEDS

drivers/net/wireless/b43/Makefile

@@ -4,7 +4,8 @@ b43-$(CONFIG_B43_NPHY)		+= tables_nphy.o
 b43-y				+= phy_common.o
 b43-y				+= phy_g.o
 b43-y				+= phy_a.o
-b43-$(CONFIG_B43_NPHY)		+= nphy.o
+b43-$(CONFIG_B43_NPHY)		+= phy_n.o
+b43-$(CONFIG_B43_PHY_LP)	+= phy_lp.o
 b43-y				+= sysfs.o
 b43-y				+= xmit.o
 b43-y				+= lo.o

drivers/net/wireless/b43/main.c

@@ -46,7 +46,7 @@
 #include "debugfs.h"
 #include "phy_common.h"
 #include "phy_g.h"
-#include "nphy.h"
+#include "phy_n.h"
 #include "dma.h"
 #include "pio.h"
 #include "sysfs.h"
@@ -1052,23 +1052,6 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags)
 	}
 }
 
-/* Turn the Analog ON/OFF */
-static void b43_switch_analog(struct b43_wldev *dev, int on)
-{
-	switch (dev->phy.type) {
-	case B43_PHYTYPE_A:
-	case B43_PHYTYPE_G:
-		b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
-		break;
-	case B43_PHYTYPE_N:
-		b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
-			      on ? 0 : 0x7FFF);
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-}
-
 void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 {
 	u32 tmslow;
@@ -1091,8 +1074,12 @@ void b43_wireless_core_reset(struct b43_wldev *dev, u32 flags)
 	ssb_read32(dev->dev, SSB_TMSLOW);	/* flush */
 	msleep(1);
 
-	/* Turn Analog ON */
-	b43_switch_analog(dev, 1);
+	/* Turn Analog ON, but only if we already know the PHY-type.
+	 * This protects against very early setup where we don't know the
+	 * PHY-type, yet. wireless_core_reset will be called once again later,
+	 * when we know the PHY-type. */
+	if (dev->phy.ops)
+		dev->phy.ops->switch_analog(dev, 1);
 
 	macctl = b43_read32(dev, B43_MMIO_MACCTL);
 	macctl &= ~B43_MACCTL_GMODE;
@@ -2694,6 +2681,7 @@ static void b43_mgmtframe_txantenna(struct b43_wldev *dev, int antenna)
 /* This is the opposite of b43_chip_init() */
 static void b43_chip_exit(struct b43_wldev *dev)
 {
+	b43_phy_exit(dev);
 	b43_gpio_cleanup(dev);
 	/* firmware is released later */
 }
@@ -2730,7 +2718,8 @@ static int b43_chip_init(struct b43_wldev *dev)
 	if (err)
 		goto err_gpio_clean;
 
-	b43_write16(dev, 0x03E6, 0x0000);
+	/* Turn the Analog on and initialize the PHY. */
+	phy->ops->switch_analog(dev, 1);
 	err = b43_phy_init(dev);
 	if (err)
 		goto err_gpio_clean;
@@ -3947,12 +3936,11 @@ static void b43_wireless_core_exit(struct b43_wldev *dev)
 	b43_dma_free(dev);
 	b43_pio_free(dev);
 	b43_chip_exit(dev);
-	b43_switch_analog(dev, 0);
+	dev->phy.ops->switch_analog(dev, 0);
 	if (dev->wl->current_beacon) {
 		dev_kfree_skb_any(dev->wl->current_beacon);
 		dev->wl->current_beacon = NULL;
 	}
-	b43_phy_exit(dev);
 
 	ssb_device_disable(dev->dev, 0);
 	ssb_bus_may_powerdown(dev->dev->bus);
@@ -3979,24 +3967,23 @@ static int b43_wireless_core_init(struct b43_wldev *dev)
 		b43_wireless_core_reset(dev, tmp);
 	}
 
+	/* Reset all data structures. */
 	setup_struct_wldev_for_init(dev);
-	err = b43_phy_operations_setup(dev);
-	if (err)
-		goto err_busdown;
+	phy->ops->prepare_structs(dev);
 
 	/* Enable IRQ routing to this device. */
 	ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
 
 	b43_imcfglo_timeouts_workaround(dev);
 	b43_bluetooth_coext_disable(dev);
-	if (phy->ops->prepare) {
-		err = phy->ops->prepare(dev);
+	if (phy->ops->prepare_hardware) {
+		err = phy->ops->prepare_hardware(dev);
 		if (err)
-			goto err_phy_exit;
+			goto err_busdown;
 	}
 	err = b43_chip_init(dev);
 	if (err)
-		goto err_phy_exit;
+		goto err_busdown;
 	b43_shm_write16(dev, B43_SHM_SHARED,
 			B43_SHM_SH_WLCOREREV, dev->dev->id.revision);
 	hf = b43_hf_read(dev);
@@ -4064,8 +4051,6 @@ out:
 
 err_chip_exit:
 	b43_chip_exit(dev);
-err_phy_exit:
-	b43_phy_exit(dev);
 err_busdown:
 	ssb_bus_may_powerdown(bus);
 	B43_WARN_ON(b43_status(dev) != B43_STAT_UNINIT);
@@ -4342,6 +4327,7 @@ static void b43_wireless_core_detach(struct b43_wldev *dev)
 	/* We release firmware that late to not be required to re-request
 	 * is all the time when we reinit the core. */
 	b43_release_firmware(dev);
+	b43_phy_free(dev);
 }
 
 static int b43_wireless_core_attach(struct b43_wldev *dev)
@@ -4415,29 +4401,35 @@ static int b43_wireless_core_attach(struct b43_wldev *dev)
 		}
 	}
 
+	err = b43_phy_allocate(dev);
+	if (err)
+		goto err_powerdown;
+
 	dev->phy.gmode = have_2ghz_phy;
 	tmp = dev->phy.gmode ? B43_TMSLOW_GMODE : 0;
 	b43_wireless_core_reset(dev, tmp);
 
 	err = b43_validate_chipaccess(dev);
 	if (err)
-		goto err_powerdown;
+		goto err_phy_free;
 	err = b43_setup_bands(dev, have_2ghz_phy, have_5ghz_phy);
 	if (err)
-		goto err_powerdown;
+		goto err_phy_free;
 
 	/* Now set some default "current_dev" */
 	if (!wl->current_dev)
 		wl->current_dev = dev;
 	INIT_WORK(&dev->restart_work, b43_chip_reset);
 
-	b43_switch_analog(dev, 0);
+	dev->phy.ops->switch_analog(dev, 0);
 	ssb_device_disable(dev->dev, 0);
 	ssb_bus_may_powerdown(bus);
 
 out:
 	return err;
 
+err_phy_free:
+	b43_phy_free(dev);
 err_powerdown:
 	ssb_bus_may_powerdown(bus);
 	return err;
@@ -4569,6 +4561,13 @@ static int b43_wireless_init(struct ssb_device *dev)
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_MESH_POINT) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_WDS) |
+		BIT(NL80211_IFTYPE_ADHOC);
+
 	hw->queues = b43_modparam_qos ? 4 : 1;
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))

drivers/net/wireless/b43/phy.c

@@ -1,489 +0,0 @@
-/*
-
-  Broadcom B43 wireless driver
-
-  Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>,
-  Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it>
-  Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
-  Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org>
-  Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch>
-
-  This program is free software; you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation; either version 2 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program; see the file COPYING.  If not, write to
-  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
-  Boston, MA 02110-1301, USA.
-
-*/
-
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/types.h>
-#include <linux/bitrev.h>
-
-#include "b43.h"
-#include "phy.h"
-#include "nphy.h"
-#include "main.h"
-#include "tables.h"
-#include "lo.h"
-#include "wa.h"
-
-
-static void b43_shm_clear_tssi(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0068, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x006a, 0x7F7F);
-		break;
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0058, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x005a, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0070, 0x7F7F);
-		b43_shm_write16(dev, B43_SHM_SHARED, 0x0072, 0x7F7F);
-		break;
-	}
-}
-
-/* http://bcm-specs.sipsolutions.net/EstimatePowerOut
- * This function converts a TSSI value to dBm in Q5.2
- */
-static s8 b43_phy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
-{
-	struct b43_phy *phy = &dev->phy;
-	s8 dbm = 0;
-	s32 tmp;
-
-	tmp = (phy->tgt_idle_tssi - phy->cur_idle_tssi + tssi);
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		tmp += 0x80;
-		tmp = clamp_val(tmp, 0x00, 0xFF);
-		dbm = phy->tssi2dbm[tmp];
-		//TODO: There's a FIXME on the specs
-		break;
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:
-		tmp = clamp_val(tmp, 0x00, 0x3F);
-		dbm = phy->tssi2dbm[tmp];
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-
-	return dbm;
-}
-
-void b43_put_attenuation_into_ranges(struct b43_wldev *dev,
-				     int *_bbatt, int *_rfatt)
-{
-	int rfatt = *_rfatt;
-	int bbatt = *_bbatt;
-	struct b43_txpower_lo_control *lo = dev->phy.lo_control;
-
-	/* Get baseband and radio attenuation values into their permitted ranges.
-	 * Radio attenuation affects power level 4 times as much as baseband. */
-
-	/* Range constants */
-	const int rf_min = lo->rfatt_list.min_val;
-	const int rf_max = lo->rfatt_list.max_val;
-	const int bb_min = lo->bbatt_list.min_val;
-	const int bb_max = lo->bbatt_list.max_val;
-
-	while (1) {
-		if (rfatt > rf_max && bbatt > bb_max - 4)
-			break;	/* Can not get it into ranges */
-		if (rfatt < rf_min && bbatt < bb_min + 4)
-			break;	/* Can not get it into ranges */
-		if (bbatt > bb_max && rfatt > rf_max - 1)
-			break;	/* Can not get it into ranges */
-		if (bbatt < bb_min && rfatt < rf_min + 1)
-			break;	/* Can not get it into ranges */
-
-		if (bbatt > bb_max) {
-			bbatt -= 4;
-			rfatt += 1;
-			continue;
-		}
-		if (bbatt < bb_min) {
-			bbatt += 4;
-			rfatt -= 1;
-			continue;
-		}
-		if (rfatt > rf_max) {
-			rfatt -= 1;
-			bbatt += 4;
-			continue;
-		}
-		if (rfatt < rf_min) {
-			rfatt += 1;
-			bbatt -= 4;
-			continue;
-		}
-		break;
-	}
-
-	*_rfatt = clamp_val(rfatt, rf_min, rf_max);
-	*_bbatt = clamp_val(bbatt, bb_min, bb_max);
-}
-
-/* http://bcm-specs.sipsolutions.net/RecalculateTransmissionPower */
-void b43_phy_xmitpower(struct b43_wldev *dev)
-{
-	struct ssb_bus *bus = dev->dev->bus;
-	struct b43_phy *phy = &dev->phy;
-
-	if (phy->cur_idle_tssi == 0)
-		return;
-	if ((bus->boardinfo.vendor == SSB_BOARDVENDOR_BCM) &&
-	    (bus->boardinfo.type == SSB_BOARD_BU4306))
-		return;
-#ifdef CONFIG_B43_DEBUG
-	if (phy->manual_txpower_control)
-		return;
-#endif
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:{
-
-			//TODO: Nothing for A PHYs yet :-/
-
-			break;
-		}
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:{
-			u16 tmp;
-			s8 v0, v1, v2, v3;
-			s8 average;
-			int max_pwr;
-			int desired_pwr, estimated_pwr, pwr_adjust;
-			int rfatt_delta, bbatt_delta;
-			int rfatt, bbatt;
-			u8 tx_control;
-
-			tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x0058);
-			v0 = (s8) (tmp & 0x00FF);
-			v1 = (s8) ((tmp & 0xFF00) >> 8);
-			tmp = b43_shm_read16(dev, B43_SHM_SHARED, 0x005A);
-			v2 = (s8) (tmp & 0x00FF);
-			v3 = (s8) ((tmp & 0xFF00) >> 8);
-			tmp = 0;
-
-			if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F
-			    || v3 == 0x7F) {
-				tmp =
-				    b43_shm_read16(dev, B43_SHM_SHARED, 0x0070);
-				v0 = (s8) (tmp & 0x00FF);
-				v1 = (s8) ((tmp & 0xFF00) >> 8);
-				tmp =
-				    b43_shm_read16(dev, B43_SHM_SHARED, 0x0072);
-				v2 = (s8) (tmp & 0x00FF);
-				v3 = (s8) ((tmp & 0xFF00) >> 8);
-				if (v0 == 0x7F || v1 == 0x7F || v2 == 0x7F
-				    || v3 == 0x7F)
-					return;
-				v0 = (v0 + 0x20) & 0x3F;
-				v1 = (v1 + 0x20) & 0x3F;
-				v2 = (v2 + 0x20) & 0x3F;
-				v3 = (v3 + 0x20) & 0x3F;
-				tmp = 1;
-			}
-			b43_shm_clear_tssi(dev);
-
-			average = (v0 + v1 + v2 + v3 + 2) / 4;
-
-			if (tmp
-			    && (b43_shm_read16(dev, B43_SHM_SHARED, 0x005E) &
-				0x8))
-				average -= 13;
-
-			estimated_pwr =
-			    b43_phy_estimate_power_out(dev, average);
-
-			max_pwr = dev->dev->bus->sprom.maxpwr_bg;
-			if ((dev->dev->bus->sprom.boardflags_lo
-			    & B43_BFL_PACTRL) && (phy->type == B43_PHYTYPE_G))
-				max_pwr -= 0x3;
-			if (unlikely(max_pwr <= 0)) {
-				b43warn(dev->wl,
-					"Invalid max-TX-power value in SPROM.\n");
-				max_pwr = 60;	/* fake it */
-				dev->dev->bus->sprom.maxpwr_bg = max_pwr;
-			}
-
-			/*TODO:
-			   max_pwr = min(REG - dev->dev->bus->sprom.antennagain_bgphy - 0x6, max_pwr)
-			   where REG is the max power as per the regulatory domain
-			 */
-
-			/* Get desired power (in Q5.2) */
-			desired_pwr = INT_TO_Q52(phy->power_level);
-			/* And limit it. max_pwr already is Q5.2 */
-			desired_pwr = clamp_val(desired_pwr, 0, max_pwr);
-			if (b43_debug(dev, B43_DBG_XMITPOWER)) {
-				b43dbg(dev->wl,
-				       "Current TX power output: " Q52_FMT
-				       " dBm, " "Desired TX power output: "
-				       Q52_FMT " dBm\n", Q52_ARG(estimated_pwr),
-				       Q52_ARG(desired_pwr));
-			}
-
-			/* Calculate the adjustment delta. */
-			pwr_adjust = desired_pwr - estimated_pwr;
-
-			/* RF attenuation delta. */
-			rfatt_delta = ((pwr_adjust + 7) / 8);
-			/* Lower attenuation => Bigger power output. Negate it. */
-			rfatt_delta = -rfatt_delta;
-
-			/* Baseband attenuation delta. */
-			bbatt_delta = pwr_adjust / 2;
-			/* Lower attenuation => Bigger power output. Negate it. */
-			bbatt_delta = -bbatt_delta;
-			/* RF att affects power level 4 times as much as
-			 * Baseband attennuation. Subtract it. */
-			bbatt_delta -= 4 * rfatt_delta;
-
-			/* So do we finally need to adjust something? */
-			if ((rfatt_delta == 0) && (bbatt_delta == 0))
-				return;
-
-			/* Calculate the new attenuation values. */
-			bbatt = phy->bbatt.att;
-			bbatt += bbatt_delta;
-			rfatt = phy->rfatt.att;
-			rfatt += rfatt_delta;
-
-			b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
-			tx_control = phy->tx_control;
-			if ((phy->radio_ver == 0x2050) && (phy->radio_rev == 2)) {
-				if (rfatt <= 1) {
-					if (tx_control == 0) {
-						tx_control =
-						    B43_TXCTL_PA2DB |
-						    B43_TXCTL_TXMIX;
-						rfatt += 2;
-						bbatt += 2;
-					} else if (dev->dev->bus->sprom.
-						   boardflags_lo &
-						   B43_BFL_PACTRL) {
-						bbatt += 4 * (rfatt - 2);
-						rfatt = 2;
-					}
-				} else if (rfatt > 4 && tx_control) {
-					tx_control = 0;
-					if (bbatt < 3) {
-						rfatt -= 3;
-						bbatt += 2;
-					} else {
-						rfatt -= 2;
-						bbatt -= 2;
-					}
-				}
-			}
-			/* Save the control values */
-			phy->tx_control = tx_control;
-			b43_put_attenuation_into_ranges(dev, &bbatt, &rfatt);
-			phy->rfatt.att = rfatt;
-			phy->bbatt.att = bbatt;
-
-			/* Adjust the hardware */
-			b43_phy_lock(dev);
-			b43_radio_lock(dev);
-			b43_set_txpower_g(dev, &phy->bbatt, &phy->rfatt,
-					  phy->tx_control);
-			b43_radio_unlock(dev);
-			b43_phy_unlock(dev);
-			break;
-		}
-	case B43_PHYTYPE_N:
-		b43_nphy_xmitpower(dev);
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-}
-
-static inline s32 b43_tssi2dbm_ad(s32 num, s32 den)
-{
-	if (num < 0)
-		return num / den;
-	else
-		return (num + den / 2) / den;
-}
-
-static inline
-    s8 b43_tssi2dbm_entry(s8 entry[], u8 index, s16 pab0, s16 pab1, s16 pab2)
-{
-	s32 m1, m2, f = 256, q, delta;
-	s8 i = 0;
-
-	m1 = b43_tssi2dbm_ad(16 * pab0 + index * pab1, 32);
-	m2 = max(b43_tssi2dbm_ad(32768 + index * pab2, 256), 1);
-	do {
-		if (i > 15)
-			return -EINVAL;
-		q = b43_tssi2dbm_ad(f * 4096 -
-				    b43_tssi2dbm_ad(m2 * f, 16) * f, 2048);
-		delta = abs(q - f);
-		f = q;
-		i++;
-	} while (delta >= 2);
-	entry[index] = clamp_val(b43_tssi2dbm_ad(m1 * f, 8192), -127, 128);
-	return 0;
-}
-
-/* http://bcm-specs.sipsolutions.net/TSSI_to_DBM_Table */
-int b43_phy_init_tssi2dbm_table(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-	s16 pab0, pab1, pab2;
-	u8 idx;
-	s8 *dyn_tssi2dbm;
-
-	if (phy->type == B43_PHYTYPE_A) {
-		pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
-		pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
-		pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
-	} else {
-		pab0 = (s16) (dev->dev->bus->sprom.pa0b0);
-		pab1 = (s16) (dev->dev->bus->sprom.pa0b1);
-		pab2 = (s16) (dev->dev->bus->sprom.pa0b2);
-	}
-
-	if ((dev->dev->bus->chip_id == 0x4301) && (phy->radio_ver != 0x2050)) {
-		phy->tgt_idle_tssi = 0x34;
-		phy->tssi2dbm = b43_tssi2dbm_b_table;
-		return 0;
-	}
-
-	if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
-	    pab0 != -1 && pab1 != -1 && pab2 != -1) {
-		/* The pabX values are set in SPROM. Use them. */
-		if (phy->type == B43_PHYTYPE_A) {
-			if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
-			    (s8) dev->dev->bus->sprom.itssi_a != -1)
-				phy->tgt_idle_tssi =
-				    (s8) (dev->dev->bus->sprom.itssi_a);
-			else
-				phy->tgt_idle_tssi = 62;
-		} else {
-			if ((s8) dev->dev->bus->sprom.itssi_bg != 0 &&
-			    (s8) dev->dev->bus->sprom.itssi_bg != -1)
-				phy->tgt_idle_tssi =
-				    (s8) (dev->dev->bus->sprom.itssi_bg);
-			else
-				phy->tgt_idle_tssi = 62;
-		}
-		dyn_tssi2dbm = kmalloc(64, GFP_KERNEL);
-		if (dyn_tssi2dbm == NULL) {
-			b43err(dev->wl, "Could not allocate memory "
-			       "for tssi2dbm table\n");
-			return -ENOMEM;
-		}
-		for (idx = 0; idx < 64; idx++)
-			if (b43_tssi2dbm_entry
-			    (dyn_tssi2dbm, idx, pab0, pab1, pab2)) {
-				phy->tssi2dbm = NULL;
-				b43err(dev->wl, "Could not generate "
-				       "tssi2dBm table\n");
-				kfree(dyn_tssi2dbm);
-				return -ENODEV;
-			}
-		phy->tssi2dbm = dyn_tssi2dbm;
-		phy->dyn_tssi_tbl = 1;
-	} else {
-		/* pabX values not set in SPROM. */
-		switch (phy->type) {
-		case B43_PHYTYPE_A:
-			/* APHY needs a generated table. */
-			phy->tssi2dbm = NULL;
-			b43err(dev->wl, "Could not generate tssi2dBm "
-			       "table (wrong SPROM info)!\n");
-			return -ENODEV;
-		case B43_PHYTYPE_B:
-			phy->tgt_idle_tssi = 0x34;
-			phy->tssi2dbm = b43_tssi2dbm_b_table;
-			break;
-		case B43_PHYTYPE_G:
-			phy->tgt_idle_tssi = 0x34;
-			phy->tssi2dbm = b43_tssi2dbm_g_table;
-			break;
-		}
-	}
-
-	return 0;
-}
-
-void b43_radio_turn_on(struct b43_wldev *dev)
-{
-	struct b43_phy *phy = &dev->phy;
-	int err;
-	u8 channel;
-
-	might_sleep();
-
-	if (phy->radio_on)
-		return;
-
-	switch (phy->type) {
-	case B43_PHYTYPE_A:
-		b43_radio_write16(dev, 0x0004, 0x00C0);
-		b43_radio_write16(dev, 0x0005, 0x0008);
-		b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7);
-		b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7);
-		b43_radio_init2060(dev);
-		break;
-	case B43_PHYTYPE_B:
-	case B43_PHYTYPE_G:
-		//XXX
-		break;
-	case B43_PHYTYPE_N:
-		b43_nphy_radio_turn_on(dev);
-		break;
-	default:
-		B43_WARN_ON(1);
-	}
-	phy->radio_on = 1;
-}
-
-void b43_radio_turn_off(struct b43_wldev *dev, bool force)
-{
-	struct b43_phy *phy = &dev->phy;
-
-	if (!phy->radio_on && !force)
-		return;
-
-	switch (phy->type) {
-	case B43_PHYTYPE_N:
-		b43_nphy_radio_turn_off(dev);
-		break;
-	case B43_PHYTYPE_A:
-		b43_radio_write16(dev, 0x0004, 0x00FF);
-		b43_radio_write16(dev, 0x0005, 0x00FB);
-		b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008);
-		b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008);
-		break;
-	case B43_PHYTYPE_G: {
-		//XXX
-		break;
-	}
-	default:
-		B43_WARN_ON(1);
-	}
-	phy->radio_on = 0;
-}

drivers/net/wireless/b43/phy_a.c

@@ -58,6 +58,25 @@ static inline u16 freq_r3A_value(u16 frequency)
 	return value;
 }
 
+#if 0
+/* This function converts a TSSI value to dBm in Q5.2 */
+static s8 b43_aphy_estimate_power_out(struct b43_wldev *dev, s8 tssi)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_a *aphy = phy->a;
+	s8 dbm = 0;
+	s32 tmp;
+
+	tmp = (aphy->tgt_idle_tssi - aphy->cur_idle_tssi + tssi);
+	tmp += 0x80;
+	tmp = clamp_val(tmp, 0x00, 0xFF);
+	dbm = aphy->tssi2dbm[tmp];
+	//TODO: There's a FIXME on the specs
+
+	return dbm;
+}
+#endif
+
 void b43_radio_set_tx_iq(struct b43_wldev *dev)
 {
 	static const u8 data_high[5] = { 0x00, 0x40, 0x80, 0x90, 0xD0 };
@@ -326,43 +345,106 @@ void b43_phy_inita(struct b43_wldev *dev)
 	}
 }
 
+/* Initialise the TSSI->dBm lookup table */
+static int b43_aphy_init_tssi2dbm_table(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_a *aphy = phy->a;
+	s16 pab0, pab1, pab2;
+
+	pab0 = (s16) (dev->dev->bus->sprom.pa1b0);
+	pab1 = (s16) (dev->dev->bus->sprom.pa1b1);
+	pab2 = (s16) (dev->dev->bus->sprom.pa1b2);
+
+	if (pab0 != 0 && pab1 != 0 && pab2 != 0 &&
+	    pab0 != -1 && pab1 != -1 && pab2 != -1) {
+		/* The pabX values are set in SPROM. Use them. */
+		if ((s8) dev->dev->bus->sprom.itssi_a != 0 &&
+		    (s8) dev->dev->bus->sprom.itssi_a != -1)
+			aphy->tgt_idle_tssi =
+			    (s8) (dev->dev->bus->sprom.itssi_a);
+		else
+			aphy->tgt_idle_tssi = 62;
+		aphy->tssi2dbm = b43_generate_dyn_tssi2dbm_tab(dev, pab0,
+							       pab1, pab2);
+		if (!aphy->tssi2dbm)
+			return -ENOMEM;
+	} else {
+		/* pabX values not set in SPROM,
+		 * but APHY needs a generated table. */
+		aphy->tssi2dbm = NULL;
+		b43err(dev->wl, "Could not generate tssi2dBm "
+		       "table (wrong SPROM info)!\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static int b43_aphy_op_allocate(struct b43_wldev *dev)
 {
 	struct b43_phy_a *aphy;
+	int err;
 
 	aphy = kzalloc(sizeof(*aphy), GFP_KERNEL);
 	if (!aphy)
 		return -ENOMEM;
 	dev->phy.a = aphy;
 
-	//TODO init struct b43_phy_a
+	err = b43_aphy_init_tssi2dbm_table(dev);
+	if (err)
+		goto err_free_aphy;
 
 	return 0;
+
+err_free_aphy:
+	kfree(aphy);
+	dev->phy.a = NULL;
+
+	return err;
 }
 
-static int b43_aphy_op_init(struct b43_wldev *dev)
+static void b43_aphy_op_prepare_structs(struct b43_wldev *dev)
 {
-	struct b43_phy_a *aphy = dev->phy.a;
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_a *aphy = phy->a;
+	const void *tssi2dbm;
+	int tgt_idle_tssi;
 
-	b43_phy_inita(dev);
-	aphy->initialised = 1;
+	/* tssi2dbm table is constant, so it is initialized at alloc time.
+	 * Save a copy of the pointer. */
+	tssi2dbm = aphy->tssi2dbm;
+	tgt_idle_tssi = aphy->tgt_idle_tssi;
+
+	/* Zero out the whole PHY structure. */
+	memset(aphy, 0, sizeof(*aphy));
+
+	aphy->tssi2dbm = tssi2dbm;
+	aphy->tgt_idle_tssi = tgt_idle_tssi;
+
+	//TODO init struct b43_phy_a
 
-	return 0;
 }
 
-static void b43_aphy_op_exit(struct b43_wldev *dev)
+static void b43_aphy_op_free(struct b43_wldev *dev)
 {
-	struct b43_phy_a *aphy = dev->phy.a;
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_a *aphy = phy->a;
+
+	kfree(aphy->tssi2dbm);
+	aphy->tssi2dbm = NULL;
 
-	if (aphy->initialised) {
-		//TODO
-		aphy->initialised = 0;
-	}
-	//TODO
 	kfree(aphy);
 	dev->phy.a = NULL;
 }
 
+static int b43_aphy_op_init(struct b43_wldev *dev)
+{
+	b43_phy_inita(dev);
+
+	return 0;
+}
+
 static inline u16 adjust_phyreg(struct b43_wldev *dev, u16 offset)
 {
 	/* OFDM registers are base-registers for the A-PHY. */
@@ -430,7 +512,23 @@ static bool b43_aphy_op_supports_hwpctl(struct b43_wldev *dev)
 
 static void b43_aphy_op_software_rfkill(struct b43_wldev *dev,
 					enum rfkill_state state)
-{//TODO
+{
+	struct b43_phy *phy = &dev->phy;
+
+	if (state == RFKILL_STATE_UNBLOCKED) {
+		if (phy->radio_on)
+			return;
+		b43_radio_write16(dev, 0x0004, 0x00C0);
+		b43_radio_write16(dev, 0x0005, 0x0008);
+		b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) & 0xFFF7);
+		b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) & 0xFFF7);
+		b43_radio_init2060(dev);
+	} else {
+		b43_radio_write16(dev, 0x0004, 0x00FF);
+		b43_radio_write16(dev, 0x0005, 0x00FB);
+		b43_phy_write(dev, 0x0010, b43_phy_read(dev, 0x0010) | 0x0008);
+		b43_phy_write(dev, 0x0011, b43_phy_read(dev, 0x0011) | 0x0008);
+	}
 }
 
 static int b43_aphy_op_switch_channel(struct b43_wldev *dev,
@@ -525,14 +623,16 @@ static void b43_aphy_op_pwork_60sec(struct b43_wldev *dev)
 
 const struct b43_phy_operations b43_phyops_a = {
 	.allocate		= b43_aphy_op_allocate,
+	.free			= b43_aphy_op_free,
+	.prepare_structs	= b43_aphy_op_prepare_structs,
 	.init			= b43_aphy_op_init,
-	.exit			= b43_aphy_op_exit,
 	.phy_read		= b43_aphy_op_read,
 	.phy_write		= b43_aphy_op_write,
 	.radio_read		= b43_aphy_op_radio_read,
 	.radio_write		= b43_aphy_op_radio_write,
 	.supports_hwpctl	= b43_aphy_op_supports_hwpctl,
 	.software_rfkill	= b43_aphy_op_software_rfkill,
+	.switch_analog		= b43_phyop_switch_analog_generic,
 	.switch_channel		= b43_aphy_op_switch_channel,
 	.get_default_chan	= b43_aphy_op_get_default_chan,
 	.set_rx_antenna		= b43_aphy_op_set_rx_antenna,

drivers/net/wireless/b43/phy_a.h

@@ -103,7 +103,13 @@ void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
 
 
 struct b43_phy_a {
-	bool initialised;
+	/* Pointer to the table used to convert a
+	 * TSSI value to dBm-Q5.2 */
+	const s8 *tssi2dbm;
+	/* Target idle TSSI */
+	int tgt_idle_tssi;
+	/* Current idle TSSI */
+	int cur_idle_tssi;//FIXME value currently not set
 
 	/* A-PHY TX Power control value. */
 	u16 txpwr_offset;

drivers/net/wireless/b43/phy_common.c

@@ -29,12 +29,13 @@
 #include "phy_common.h"
 #include "phy_g.h"
 #include "phy_a.h"
-#include "nphy.h"
+#include "phy_n.h"
+#include "phy_lp.h"
 #include "b43.h"
 #include "main.h"
 
 
-int b43_phy_operations_setup(struct b43_wldev *dev)
+int b43_phy_allocate(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &(dev->phy);
 	int err;
@@ -54,7 +55,9 @@ int b43_phy_operations_setup(struct b43_wldev *dev)
 #endif
 		break;
 	case B43_PHYTYPE_LP:
-		/* FIXME: Not yet */
+#ifdef CONFIG_B43_PHY_LP
+		phy->ops = &b43_phyops_lp;
+#endif
 		break;
 	}
 	if (B43_WARN_ON(!phy->ops))
@@ -67,6 +70,12 @@ int b43_phy_operations_setup(struct b43_wldev *dev)
 	return err;
 }
 
+void b43_phy_free(struct b43_wldev *dev)
+{
+	dev->phy.ops->free(dev);
+	dev->phy.ops = NULL;
+}
+
 int b43_phy_init(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
@@ -365,3 +374,8 @@ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset)
 
 	return average;
 }
+
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on)
+{
+	b43_write16(dev, B43_MMIO_PHY0, on ? 0 : 0xF4);
+}

drivers/net/wireless/b43/phy_common.h

@@ -74,11 +74,21 @@ enum b43_txpwr_result {
 /**
  * struct b43_phy_operations - Function pointers for PHY ops.
  *
- * @prepare:		Prepare the PHY. This is called before @init.
+ * @allocate:		Allocate and initialise the PHY data structures.
+ * 			Must not be NULL.
+ * @free:		Destroy and free the PHY data structures.
+ * 			Must not be NULL.
+ *
+ * @prepare_structs:	Prepare the PHY data structures.
+ * 			The data structures allocated in @allocate are
+ * 			initialized here.
+ * 			Must not be NULL.
+ * @prepare_hardware:	Prepare the PHY. This is called before b43_chip_init to
+ * 			do some early early PHY hardware init.
  * 			Can be NULL, if not required.
  * @init:		Initialize the PHY.
  * 			Must not be NULL.
- * @exit:		Shutdown the PHY and free all data structures.
+ * @exit:		Shutdown the PHY.
  * 			Can be NULL, if not required.
  *
  * @phy_read:		Read from a PHY register.
@@ -98,6 +108,8 @@ enum b43_txpwr_result {
  * 			RFKILL_STATE_SOFT_BLOCKED or
  * 			RFKILL_STATE_UNBLOCKED
  * 			Must not be NULL.
+ * @switch_analog:	Turn the Analog on/off.
+ * 			Must not be NULL.
  * @switch_channel:	Switch the radio to another channel.
  * 			Must not be NULL.
  * @get_default_chan:	Just returns the default channel number.
@@ -133,7 +145,9 @@ enum b43_txpwr_result {
 struct b43_phy_operations {
 	/* Initialisation */
 	int (*allocate)(struct b43_wldev *dev);
-	int (*prepare)(struct b43_wldev *dev);
+	void (*free)(struct b43_wldev *dev);
+	void (*prepare_structs)(struct b43_wldev *dev);
+	int (*prepare_hardware)(struct b43_wldev *dev);
 	int (*init)(struct b43_wldev *dev);
 	void (*exit)(struct b43_wldev *dev);
 
@@ -146,6 +160,7 @@ struct b43_phy_operations {
 	/* Radio */
 	bool (*supports_hwpctl)(struct b43_wldev *dev);
 	void (*software_rfkill)(struct b43_wldev *dev, enum rfkill_state state);
+	void (*switch_analog)(struct b43_wldev *dev, bool on);
 	int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel);
 	unsigned int (*get_default_chan)(struct b43_wldev *dev);
 	void (*set_rx_antenna)(struct b43_wldev *dev, int antenna);
@@ -165,6 +180,7 @@ struct b43_phy_operations {
 struct b43_phy_a;
 struct b43_phy_g;
 struct b43_phy_n;
+struct b43_phy_lp;
 
 struct b43_phy {
 	/* Hardware operation callbacks. */
@@ -185,6 +201,8 @@ struct b43_phy {
 		struct b43_phy_g *g;
 		/* N-PHY specific information */
 		struct b43_phy_n *n;
+		/* LP-PHY specific information */
+		struct b43_phy_lp *lp;
 	};
 
 	/* Band support flags. */
@@ -234,10 +252,15 @@ struct b43_phy {
 
 
 /**
- * b43_phy_operations_setup - Initialize the PHY operations datastructure
- * based on the current PHY type.
+ * b43_phy_allocate - Allocate PHY structs
+ * Allocate the PHY data structures, based on the current dev->phy.type
+ */
+int b43_phy_allocate(struct b43_wldev *dev);
+
+/**
+ * b43_phy_free - Free PHY structs
  */
-int b43_phy_operations_setup(struct b43_wldev *dev);
+void b43_phy_free(struct b43_wldev *dev);
 
 /**
  * b43_phy_init - Initialise the PHY
@@ -377,5 +400,14 @@ void b43_phy_txpower_adjust_work(struct work_struct *work);
  */
 int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset);
 
+/**
+ * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog.
+ *
+ * It does the switching based on the PHY0 core register.
+ * Do _not_ call this directly. Only use it as a switch_analog callback
+ * for struct b43_phy_operations.
+ */
+void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on);
+
 
 #endif /* LINUX_B43_PHY_COMMON_H_ */

drivers/net/wireless/b43/phy_g.c

@@ -232,11 +232,12 @@ void b43_set_txpower_g(struct b43_wldev *dev,
 	if (unlikely(tx_bias == 0xFF))
 		tx_bias = 0;
 
-	/* Save the values for later */
+	/* Save the values for later. Use memmove, because it's valid
+	 * to pass &gphy->rfatt as rfatt pointer argument. Same for bbatt. */
 	gphy->tx_control = tx_control;
-	memcpy(&gphy->rfatt, rfatt, sizeof(*rfatt));
+	memmove(&gphy->rfatt, rfatt, sizeof(*rfatt));
 	gphy->rfatt.with_padmix = !!(tx_control & B43_TXCTL_TXMIX);
-	memcpy(&gphy->bbatt, bbatt, sizeof(*bbatt));
+	memmove(&gphy->bbatt, bbatt, sizeof(*bbatt));
 
 	if (b43_debug(dev, B43_DBG_XMITPOWER)) {
 		b43dbg(dev->wl, "Tuning TX-power to bbatt(%u), "
@@ -2634,7 +2635,7 @@ static int b43_gphy_op_allocate(struct b43_wldev *dev)
 {
 	struct b43_phy_g *gphy;
 	struct b43_txpower_lo_control *lo;
-	int err, i;
+	int err;
 
 	gphy = kzalloc(sizeof(*gphy), GFP_KERNEL);
 	if (!gphy) {
@@ -2643,6 +2644,51 @@ static int b43_gphy_op_allocate(struct b43_wldev *dev)
 	}
 	dev->phy.g = gphy;
 
+	lo = kzalloc(sizeof(*lo), GFP_KERNEL);
+	if (!lo) {
+		err = -ENOMEM;
+		goto err_free_gphy;
+	}
+	gphy->lo_control = lo;
+
+	err = b43_gphy_init_tssi2dbm_table(dev);
+	if (err)
+		goto err_free_lo;
+
+	return 0;
+
+err_free_lo:
+	kfree(lo);
+err_free_gphy:
+	kfree(gphy);
+error:
+	return err;
+}
+
+static void b43_gphy_op_prepare_structs(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_g *gphy = phy->g;
+	const void *tssi2dbm;
+	int tgt_idle_tssi;
+	struct b43_txpower_lo_control *lo;
+	unsigned int i;
+
+	/* tssi2dbm table is constant, so it is initialized at alloc time.
+	 * Save a copy of the pointer. */
+	tssi2dbm = gphy->tssi2dbm;
+	tgt_idle_tssi = gphy->tgt_idle_tssi;
+	/* Save the LO pointer. */
+	lo = gphy->lo_control;
+
+	/* Zero out the whole PHY structure. */
+	memset(gphy, 0, sizeof(*gphy));
+
+	/* Restore pointers. */
+	gphy->tssi2dbm = tssi2dbm;
+	gphy->tgt_idle_tssi = tgt_idle_tssi;
+	gphy->lo_control = lo;
+
 	memset(gphy->minlowsig, 0xFF, sizeof(gphy->minlowsig));
 
 	/* NRSSI */
@@ -2661,31 +2707,28 @@ static int b43_gphy_op_allocate(struct b43_wldev *dev)
 
 	gphy->average_tssi = 0xFF;
 
-	lo = kzalloc(sizeof(*lo), GFP_KERNEL);
-	if (!lo) {
-		err = -ENOMEM;
-		goto err_free_gphy;
-	}
-	gphy->lo_control = lo;
-
+	/* Local Osciallator structure */
 	lo->tx_bias = 0xFF;
 	INIT_LIST_HEAD(&lo->calib_list);
+}
 
-	err = b43_gphy_init_tssi2dbm_table(dev);
-	if (err)
-		goto err_free_lo;
+static void b43_gphy_op_free(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_g *gphy = phy->g;
 
-	return 0;
+	kfree(gphy->lo_control);
+
+	if (gphy->dyn_tssi_tbl)
+		kfree(gphy->tssi2dbm);
+	gphy->dyn_tssi_tbl = 0;
+	gphy->tssi2dbm = NULL;
 
-err_free_lo:
-	kfree(lo);
-err_free_gphy:
 	kfree(gphy);
-error:
-	return err;
+	dev->phy.g = NULL;
 }
 
-static int b43_gphy_op_prepare(struct b43_wldev *dev)
+static int b43_gphy_op_prepare_hardware(struct b43_wldev *dev)
 {
 	struct b43_phy *phy = &dev->phy;
 	struct b43_phy_g *gphy = phy->g;
@@ -2717,28 +2760,14 @@ static int b43_gphy_op_prepare(struct b43_wldev *dev)
 
 static int b43_gphy_op_init(struct b43_wldev *dev)
 {
-	struct b43_phy_g *gphy = dev->phy.g;
-
 	b43_phy_initg(dev);
-	gphy->initialised = 1;
 
 	return 0;
 }
 
 static void b43_gphy_op_exit(struct b43_wldev *dev)
 {
-	struct b43_phy_g *gphy = dev->phy.g;
-
-	if (gphy->initialised) {
-		//TODO
-		gphy->initialised = 0;
-	}
 	b43_lo_g_cleanup(dev);
-	kfree(gphy->lo_control);
-	if (gphy->dyn_tssi_tbl)
-		kfree(gphy->tssi2dbm);
-	kfree(gphy);
-	dev->phy.g = NULL;
 }
 
 static u16 b43_gphy_op_read(struct b43_wldev *dev, u16 reg)
@@ -3231,7 +3260,9 @@ static void b43_gphy_op_pwork_60sec(struct b43_wldev *dev)
 
 const struct b43_phy_operations b43_phyops_g = {
 	.allocate		= b43_gphy_op_allocate,
-	.prepare		= b43_gphy_op_prepare,
+	.free			= b43_gphy_op_free,
+	.prepare_structs	= b43_gphy_op_prepare_structs,
+	.prepare_hardware	= b43_gphy_op_prepare_hardware,
 	.init			= b43_gphy_op_init,
 	.exit			= b43_gphy_op_exit,
 	.phy_read		= b43_gphy_op_read,
@@ -3240,6 +3271,7 @@ const struct b43_phy_operations b43_phyops_g = {
 	.radio_write		= b43_gphy_op_radio_write,
 	.supports_hwpctl	= b43_gphy_op_supports_hwpctl,
 	.software_rfkill	= b43_gphy_op_software_rfkill,
+	.switch_analog		= b43_phyop_switch_analog_generic,
 	.switch_channel		= b43_gphy_op_switch_channel,
 	.get_default_chan	= b43_gphy_op_get_default_chan,
 	.set_rx_antenna		= b43_gphy_op_set_rx_antenna,

drivers/net/wireless/b43/phy_g.h

@@ -114,8 +114,6 @@ static inline bool b43_compare_bbatt(const struct b43_bbatt *a,
 struct b43_txpower_lo_control;
 
 struct b43_phy_g {
-	bool initialised;
-
 	/* ACI (adjacent channel interference) flags. */
 	bool aci_enable;
 	bool aci_wlan_automatic;
@@ -202,6 +200,8 @@ void b43_gphy_set_baseband_attenuation(struct b43_wldev *dev,
 void b43_gphy_channel_switch(struct b43_wldev *dev,
 			     unsigned int channel,
 			     bool synthetic_pu_workaround);
+u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
+				   s16 pab0, s16 pab1, s16 pab2);
 
 struct b43_phy_operations;
 extern const struct b43_phy_operations b43_phyops_g;

drivers/net/wireless/b43/phy_lp.c

@@ -0,0 +1,155 @@
+/*
+
+  Broadcom B43 wireless driver
+  IEEE 802.11g LP-PHY driver
+
+  Copyright (c) 2008 Michael Buesch <mb@bu3sch.de>
+
+  This program is free software; you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation; either version 2 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program; see the file COPYING.  If not, write to
+  the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
+  Boston, MA 02110-1301, USA.
+
+*/
+
+#include "b43.h"
+#include "phy_lp.h"
+#include "phy_common.h"
+
+
+static int b43_lpphy_op_allocate(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy;
+
+	lpphy = kzalloc(sizeof(*lpphy), GFP_KERNEL);
+	if (!lpphy)
+		return -ENOMEM;
+	dev->phy.lp = lpphy;
+
+	return 0;
+}
+
+static void b43_lpphy_op_prepare_structs(struct b43_wldev *dev)
+{
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_lp *lpphy = phy->lp;
+
+	memset(lpphy, 0, sizeof(*lpphy));
+
+	//TODO
+}
+
+static void b43_lpphy_op_free(struct b43_wldev *dev)
+{
+	struct b43_phy_lp *lpphy = dev->phy.lp;
+
+	kfree(lpphy);
+	dev->phy.lp = NULL;
+}
+
+static int b43_lpphy_op_init(struct b43_wldev *dev)
+{
+	//TODO
+
+	return 0;
+}
+
+static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
+{
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_PHY_DATA);
+}
+
+static void b43_lpphy_op_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_PHY_DATA, value);
+}
+
+static u16 b43_lpphy_op_radio_read(struct b43_wldev *dev, u16 reg)
+{
+	/* Register 1 is a 32-bit register. */
+	B43_WARN_ON(reg == 1);
+	/* LP-PHY needs a special bit set for read access */
+	if (dev->phy.rev < 2) {
+		if (reg != 0x4001)
+			reg |= 0x100;
+	} else
+		reg |= 0x200;
+
+	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+	return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
+}
+
+static void b43_lpphy_op_radio_write(struct b43_wldev *dev, u16 reg, u16 value)
+{
+	/* Register 1 is a 32-bit register. */
+	B43_WARN_ON(reg == 1);
+
+	b43_write16(dev, B43_MMIO_RADIO_CONTROL, reg);
+	b43_write16(dev, B43_MMIO_RADIO_DATA_LOW, value);
+}
+
+static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
+					 enum rfkill_state state)
+{
+	//TODO
+}
+
+static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
+				       unsigned int new_channel)
+{
+	//TODO
+	return 0;
+}
+
+static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
+{
+	return 1; /* Default to channel 1 */
+}
+
+static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
+{
+	//TODO
+}
+
+static void b43_lpphy_op_adjust_txpower(struct b43_wldev *dev)
+{
+	//TODO
+}
+
+static enum b43_txpwr_result b43_lpphy_op_recalc_txpower(struct b43_wldev *dev,
+							 bool ignore_tssi)
+{
+	//TODO
+	return B43_TXPWR_RES_DONE;
+}
+
+
+const struct b43_phy_operations b43_phyops_lp = {
+	.allocate		= b43_lpphy_op_allocate,
+	.free			= b43_lpphy_op_free,
+	.prepare_structs	= b43_lpphy_op_prepare_structs,
+	.init			= b43_lpphy_op_init,
+	.phy_read		= b43_lpphy_op_read,
+	.phy_write		= b43_lpphy_op_write,
+	.radio_read		= b43_lpphy_op_radio_read,
+	.radio_write		= b43_lpphy_op_radio_write,
+	.software_rfkill	= b43_lpphy_op_software_rfkill,
+	.switch_analog		= b43_phyop_switch_analog_generic,
+	.switch_channel		= b43_lpphy_op_switch_channel,
+	.get_default_chan	= b43_lpphy_op_get_default_chan,
+	.set_rx_antenna		= b43_lpphy_op_set_rx_antenna,
+	.recalc_txpower		= b43_lpphy_op_recalc_txpower,
+	.adjust_txpower		= b43_lpphy_op_adjust_txpower,
+};

drivers/net/wireless/b43/phy_lp.h

@@ -0,0 +1,540 @@
+#ifndef LINUX_B43_PHY_LP_H_
+#define LINUX_B43_PHY_LP_H_
+
+/* Definitions for the LP-PHY */
+
+
+
+
+#define B43_LP_RADIO(radio_reg)			(radio_reg)
+#define B43_LP_NORTH(radio_reg)			B43_LP_RADIO(radio_reg)
+#define B43_LP_SOUTH(radio_reg)			B43_LP_RADIO((radio_reg) | 0x4000)
+
+
+/*** Broadcom 2062 NORTH radio registers ***/
+#define B2062_N_COMM1				B43_LP_NORTH(0x000) /* Common 01 (north) */
+#define B2062_N_COMM2				B43_LP_NORTH(0x002) /* Common 02 (north) */
+#define B2062_N_COMM3				B43_LP_NORTH(0x003) /* Common 03 (north) */
+#define B2062_N_COMM4				B43_LP_NORTH(0x004) /* Common 04 (north) */
+#define B2062_N_COMM5				B43_LP_NORTH(0x005) /* Common 05 (north) */
+#define B2062_N_COMM6				B43_LP_NORTH(0x006) /* Common 06 (north) */
+#define B2062_N_COMM7				B43_LP_NORTH(0x007) /* Common 07 (north) */
+#define B2062_N_COMM8				B43_LP_NORTH(0x008) /* Common 08 (north) */
+#define B2062_N_COMM9				B43_LP_NORTH(0x009) /* Common 09 (north) */
+#define B2062_N_COMM10				B43_LP_NORTH(0x00A) /* Common 10 (north) */
+#define B2062_N_COMM11				B43_LP_NORTH(0x00B) /* Common 11 (north) */
+#define B2062_N_COMM12				B43_LP_NORTH(0x00C) /* Common 12 (north) */
+#define B2062_N_COMM13				B43_LP_NORTH(0x00D) /* Common 13 (north) */
+#define B2062_N_COMM14				B43_LP_NORTH(0x00E) /* Common 14 (north) */
+#define B2062_N_COMM15				B43_LP_NORTH(0x00F) /* Common 15 (north) */
+#define B2062_N_PDN_CTL0			B43_LP_NORTH(0x010) /* PDN Control 0 (north) */
+#define B2062_N_PDN_CTL1			B43_LP_NORTH(0x011) /* PDN Control 1 (north) */
+#define B2062_N_PDN_CTL2			B43_LP_NORTH(0x012) /* PDN Control 2 (north) */
+#define B2062_N_PDN_CTL3			B43_LP_NORTH(0x013) /* PDN Control 3 (north) */
+#define B2062_N_PDN_CTL4			B43_LP_NORTH(0x014) /* PDN Control 4 (north) */
+#define B2062_N_GEN_CTL0			B43_LP_NORTH(0x015) /* GEN Control 0 (north) */
+#define B2062_N_IQ_CALIB			B43_LP_NORTH(0x016) /* IQ Calibration (north) */
+#define B2062_N_LGENC				B43_LP_NORTH(0x017) /* LGENC (north) */
+#define B2062_N_LGENA_LPF			B43_LP_NORTH(0x018) /* LGENA LPF (north) */
+#define B2062_N_LGENA_BIAS0			B43_LP_NORTH(0x019) /* LGENA Bias 0 (north) */
+#define B2062_N_LGNEA_BIAS1			B43_LP_NORTH(0x01A) /* LGNEA Bias 1 (north) */
+#define B2062_N_LGENA_CTL0			B43_LP_NORTH(0x01B) /* LGENA Control 0 (north) */
+#define B2062_N_LGENA_CTL1			B43_LP_NORTH(0x01C) /* LGENA Control 1 (north) */
+#define B2062_N_LGENA_CTL2			B43_LP_NORTH(0x01D) /* LGENA Control 2 (north) */
+#define B2062_N_LGENA_TUNE0			B43_LP_NORTH(0x01E) /* LGENA Tune 0 (north) */
+#define B2062_N_LGENA_TUNE1			B43_LP_NORTH(0x01F) /* LGENA Tune 1 (north) */
+#define B2062_N_LGENA_TUNE2			B43_LP_NORTH(0x020) /* LGENA Tune 2 (north) */
+#define B2062_N_LGENA_TUNE3			B43_LP_NORTH(0x021) /* LGENA Tune 3 (north) */
+#define B2062_N_LGENA_CTL3			B43_LP_NORTH(0x022) /* LGENA Control 3 (north) */
+#define B2062_N_LGENA_CTL4			B43_LP_NORTH(0x023) /* LGENA Control 4 (north) */
+#define B2062_N_LGENA_CTL5			B43_LP_NORTH(0x024) /* LGENA Control 5 (north) */
+#define B2062_N_LGENA_CTL6			B43_LP_NORTH(0x025) /* LGENA Control 6 (north) */
+#define B2062_N_LGENA_CTL7			B43_LP_NORTH(0x026) /* LGENA Control 7 (north) */
+#define B2062_N_RXA_CTL0			B43_LP_NORTH(0x027) /* RXA Control 0 (north) */
+#define B2062_N_RXA_CTL1			B43_LP_NORTH(0x028) /* RXA Control 1 (north) */
+#define B2062_N_RXA_CTL2			B43_LP_NORTH(0x029) /* RXA Control 2 (north) */
+#define B2062_N_RXA_CTL3			B43_LP_NORTH(0x02A) /* RXA Control 3 (north) */
+#define B2062_N_RXA_CTL4			B43_LP_NORTH(0x02B) /* RXA Control 4 (north) */
+#define B2062_N_RXA_CTL5			B43_LP_NORTH(0x02C) /* RXA Control 5 (north) */
+#define B2062_N_RXA_CTL6			B43_LP_NORTH(0x02D) /* RXA Control 6 (north) */
+#define B2062_N_RXA_CTL7			B43_LP_NORTH(0x02E) /* RXA Control 7 (north) */
+#define B2062_N_RXBB_CTL0			B43_LP_NORTH(0x02F) /* RXBB Control 0 (north) */
+#define B2062_N_RXBB_CTL1			B43_LP_NORTH(0x030) /* RXBB Control 1 (north) */
+#define B2062_N_RXBB_CTL2			B43_LP_NORTH(0x031) /* RXBB Control 2 (north) */
+#define B2062_N_RXBB_GAIN0			B43_LP_NORTH(0x032) /* RXBB Gain 0 (north) */
+#define B2062_N_RXBB_GAIN1			B43_LP_NORTH(0x033) /* RXBB Gain 1 (north) */
+#define B2062_N_RXBB_GAIN2			B43_LP_NORTH(0x034) /* RXBB Gain 2 (north) */
+#define B2062_N_RXBB_GAIN3			B43_LP_NORTH(0x035) /* RXBB Gain 3 (north) */
+#define B2062_N_RXBB_RSSI0			B43_LP_NORTH(0x036) /* RXBB RSSI 0 (north) */
+#define B2062_N_RXBB_RSSI1			B43_LP_NORTH(0x037) /* RXBB RSSI 1 (north) */
+#define B2062_N_RXBB_CALIB0			B43_LP_NORTH(0x038) /* RXBB Calibration0 (north) */
+#define B2062_N_RXBB_CALIB1			B43_LP_NORTH(0x039) /* RXBB Calibration1 (north) */
+#define B2062_N_RXBB_CALIB2			B43_LP_NORTH(0x03A) /* RXBB Calibration2 (north) */
+#define B2062_N_RXBB_BIAS0			B43_LP_NORTH(0x03B) /* RXBB Bias 0 (north) */
+#define B2062_N_RXBB_BIAS1			B43_LP_NORTH(0x03C) /* RXBB Bias 1 (north) */
+#define B2062_N_RXBB_BIAS2			B43_LP_NORTH(0x03D) /* RXBB Bias 2 (north) */
+#define B2062_N_RXBB_BIAS3			B43_LP_NORTH(0x03E) /* RXBB Bias 3 (north) */
+#define B2062_N_RXBB_BIAS4			B43_LP_NORTH(0x03F) /* RXBB Bias 4 (north) */
+#define B2062_N_RXBB_BIAS5			B43_LP_NORTH(0x040) /* RXBB Bias 5 (north) */
+#define B2062_N_RXBB_RSSI2			B43_LP_NORTH(0x041) /* RXBB RSSI 2 (north) */
+#define B2062_N_RXBB_RSSI3			B43_LP_NORTH(0x042) /* RXBB RSSI 3 (north) */
+#define B2062_N_RXBB_RSSI4			B43_LP_NORTH(0x043) /* RXBB RSSI 4 (north) */
+#define B2062_N_RXBB_RSSI5			B43_LP_NORTH(0x044) /* RXBB RSSI 5 (north) */
+#define B2062_N_TX_CTL0				B43_LP_NORTH(0x045) /* TX Control 0 (north) */
+#define B2062_N_TX_CTL1				B43_LP_NORTH(0x046) /* TX Control 1 (north) */
+#define B2062_N_TX_CTL2				B43_LP_NORTH(0x047) /* TX Control 2 (north) */
+#define B2062_N_TX_CTL3				B43_LP_NORTH(0x048) /* TX Control 3 (north) */
+#define B2062_N_TX_CTL4				B43_LP_NORTH(0x049) /* TX Control 4 (north) */
+#define B2062_N_TX_CTL5				B43_LP_NORTH(0x04A) /* TX Control 5 (north) */
+#define B2062_N_TX_CTL6				B43_LP_NORTH(0x04B) /* TX Control 6 (north) */
+#define B2062_N_TX_CTL7				B43_LP_NORTH(0x04C) /* TX Control 7 (north) */
+#define B2062_N_TX_CTL8				B43_LP_NORTH(0x04D) /* TX Control 8 (north) */
+#define B2062_N_TX_CTL9				B43_LP_NORTH(0x04E) /* TX Control 9 (north) */
+#define B2062_N_TX_CTL_A			B43_LP_NORTH(0x04F) /* TX Control A (north) */
+#define B2062_N_TX_GC2G				B43_LP_NORTH(0x050) /* TX GC2G (north) */
+#define B2062_N_TX_GC5G				B43_LP_NORTH(0x051) /* TX GC5G (north) */
+#define B2062_N_TX_TUNE				B43_LP_NORTH(0x052) /* TX Tune (north) */
+#define B2062_N_TX_PAD				B43_LP_NORTH(0x053) /* TX PAD (north) */
+#define B2062_N_TX_PGA				B43_LP_NORTH(0x054) /* TX PGA (north) */
+#define B2062_N_TX_PADAUX			B43_LP_NORTH(0x055) /* TX PADAUX (north) */
+#define B2062_N_TX_PGAAUX			B43_LP_NORTH(0x056) /* TX PGAAUX (north) */
+#define B2062_N_TSSI_CTL0			B43_LP_NORTH(0x057) /* TSSI Control 0 (north) */
+#define B2062_N_TSSI_CTL1			B43_LP_NORTH(0x058) /* TSSI Control 1 (north) */
+#define B2062_N_TSSI_CTL2			B43_LP_NORTH(0x059) /* TSSI Control 2 (north) */
+#define B2062_N_IQ_CALIB_CTL0			B43_LP_NORTH(0x05A) /* IQ Calibration Control 0 (north) */
+#define B2062_N_IQ_CALIB_CTL1			B43_LP_NORTH(0x05B) /* IQ Calibration Control 1 (north) */
+#define B2062_N_IQ_CALIB_CTL2			B43_LP_NORTH(0x05C) /* IQ Calibration Control 2 (north) */
+#define B2062_N_CALIB_TS			B43_LP_NORTH(0x05D) /* Calibration TS (north) */
+#define B2062_N_CALIB_CTL0			B43_LP_NORTH(0x05E) /* Calibration Control 0 (north) */
+#define B2062_N_CALIB_CTL1			B43_LP_NORTH(0x05F) /* Calibration Control 1 (north) */
+#define B2062_N_CALIB_CTL2			B43_LP_NORTH(0x060) /* Calibration Control 2 (north) */
+#define B2062_N_CALIB_CTL3			B43_LP_NORTH(0x061) /* Calibration Control 3 (north) */
+#define B2062_N_CALIB_CTL4			B43_LP_NORTH(0x062) /* Calibration Control 4 (north) */
+#define B2062_N_CALIB_DBG0			B43_LP_NORTH(0x063) /* Calibration Debug 0 (north) */
+#define B2062_N_CALIB_DBG1			B43_LP_NORTH(0x064) /* Calibration Debug 1 (north) */
+#define B2062_N_CALIB_DBG2			B43_LP_NORTH(0x065) /* Calibration Debug 2 (north) */
+#define B2062_N_CALIB_DBG3			B43_LP_NORTH(0x066) /* Calibration Debug 3 (north) */
+#define B2062_N_PSENSE_CTL0			B43_LP_NORTH(0x069) /* PSENSE Control 0 (north) */
+#define B2062_N_PSENSE_CTL1			B43_LP_NORTH(0x06A) /* PSENSE Control 1 (north) */
+#define B2062_N_PSENSE_CTL2			B43_LP_NORTH(0x06B) /* PSENSE Control 2 (north) */
+#define B2062_N_TEST_BUF0			B43_LP_NORTH(0x06C) /* TEST BUF0 (north) */
+
+/*** Broadcom 2062 SOUTH radio registers ***/
+#define B2062_S_COMM1				B43_LP_SOUTH(0x000) /* Common 01 (south) */
+#define B2062_S_RADIO_ID_CODE			B43_LP_SOUTH(0x001) /* Radio ID code (south) */
+#define B2062_S_COMM2				B43_LP_SOUTH(0x002) /* Common 02 (south) */
+#define B2062_S_COMM3				B43_LP_SOUTH(0x003) /* Common 03 (south) */
+#define B2062_S_COMM4				B43_LP_SOUTH(0x004) /* Common 04 (south) */
+#define B2062_S_COMM5				B43_LP_SOUTH(0x005) /* Common 05 (south) */
+#define B2062_S_COMM6				B43_LP_SOUTH(0x006) /* Common 06 (south) */
+#define B2062_S_COMM7				B43_LP_SOUTH(0x007) /* Common 07 (south) */
+#define B2062_S_COMM8				B43_LP_SOUTH(0x008) /* Common 08 (south) */
+#define B2062_S_COMM9				B43_LP_SOUTH(0x009) /* Common 09 (south) */
+#define B2062_S_COMM10				B43_LP_SOUTH(0x00A) /* Common 10 (south) */
+#define B2062_S_COMM11				B43_LP_SOUTH(0x00B) /* Common 11 (south) */
+#define B2062_S_COMM12				B43_LP_SOUTH(0x00C) /* Common 12 (south) */
+#define B2062_S_COMM13				B43_LP_SOUTH(0x00D) /* Common 13 (south) */
+#define B2062_S_COMM14				B43_LP_SOUTH(0x00E) /* Common 14 (south) */
+#define B2062_S_COMM15				B43_LP_SOUTH(0x00F) /* Common 15 (south) */
+#define B2062_S_PDS_CTL0			B43_LP_SOUTH(0x010) /* PDS Control 0 (south) */
+#define B2062_S_PDS_CTL1			B43_LP_SOUTH(0x011) /* PDS Control 1 (south) */
+#define B2062_S_PDS_CTL2			B43_LP_SOUTH(0x012) /* PDS Control 2 (south) */
+#define B2062_S_PDS_CTL3			B43_LP_SOUTH(0x013) /* PDS Control 3 (south) */
+#define B2062_S_BG_CTL0				B43_LP_SOUTH(0x014) /* BG Control 0 (south) */
+#define B2062_S_BG_CTL1				B43_LP_SOUTH(0x015) /* BG Control 1 (south) */
+#define B2062_S_BG_CTL2				B43_LP_SOUTH(0x016) /* BG Control 2 (south) */
+#define B2062_S_LGENG_CTL0			B43_LP_SOUTH(0x017) /* LGENG Control 00 (south) */
+#define B2062_S_LGENG_CTL1			B43_LP_SOUTH(0x018) /* LGENG Control 01 (south) */
+#define B2062_S_LGENG_CTL2			B43_LP_SOUTH(0x019) /* LGENG Control 02 (south) */
+#define B2062_S_LGENG_CTL3			B43_LP_SOUTH(0x01A) /* LGENG Control 03 (south) */
+#define B2062_S_LGENG_CTL4			B43_LP_SOUTH(0x01B) /* LGENG Control 04 (south) */
+#define B2062_S_LGENG_CTL5			B43_LP_SOUTH(0x01C) /* LGENG Control 05 (south) */
+#define B2062_S_LGENG_CTL6			B43_LP_SOUTH(0x01D) /* LGENG Control 06 (south) */
+#define B2062_S_LGENG_CTL7			B43_LP_SOUTH(0x01E) /* LGENG Control 07 (south) */
+#define B2062_S_LGENG_CTL8			B43_LP_SOUTH(0x01F) /* LGENG Control 08 (south) */
+#define B2062_S_LGENG_CTL9			B43_LP_SOUTH(0x020) /* LGENG Control 09 (south) */
+#define B2062_S_LGENG_CTL10			B43_LP_SOUTH(0x021) /* LGENG Control 10 (south) */
+#define B2062_S_LGENG_CTL11			B43_LP_SOUTH(0x022) /* LGENG Control 11 (south) */
+#define B2062_S_REFPLL_CTL0			B43_LP_SOUTH(0x023) /* REFPLL Control 00 (south) */
+#define B2062_S_REFPLL_CTL1			B43_LP_SOUTH(0x024) /* REFPLL Control 01 (south) */
+#define B2062_S_REFPLL_CTL2			B43_LP_SOUTH(0x025) /* REFPLL Control 02 (south) */
+#define B2062_S_REFPLL_CTL3			B43_LP_SOUTH(0x026) /* REFPLL Control 03 (south) */
+#define B2062_S_REFPLL_CTL4			B43_LP_SOUTH(0x027) /* REFPLL Control 04 (south) */
+#define B2062_S_REFPLL_CTL5			B43_LP_SOUTH(0x028) /* REFPLL Control 05 (south) */
+#define B2062_S_REFPLL_CTL6			B43_LP_SOUTH(0x029) /* REFPLL Control 06 (south) */
+#define B2062_S_REFPLL_CTL7			B43_LP_SOUTH(0x02A) /* REFPLL Control 07 (south) */
+#define B2062_S_REFPLL_CTL8			B43_LP_SOUTH(0x02B) /* REFPLL Control 08 (south) */
+#define B2062_S_REFPLL_CTL9			B43_LP_SOUTH(0x02C) /* REFPLL Control 09 (south) */
+#define B2062_S_REFPLL_CTL10			B43_LP_SOUTH(0x02D) /* REFPLL Control 10 (south) */
+#define B2062_S_REFPLL_CTL11			B43_LP_SOUTH(0x02E) /* REFPLL Control 11 (south) */
+#define B2062_S_REFPLL_CTL12			B43_LP_SOUTH(0x02F) /* REFPLL Control 12 (south) */
+#define B2062_S_REFPLL_CTL13			B43_LP_SOUTH(0x030) /* REFPLL Control 13 (south) */
+#define B2062_S_REFPLL_CTL14			B43_LP_SOUTH(0x031) /* REFPLL Control 14 (south) */
+#define B2062_S_REFPLL_CTL15			B43_LP_SOUTH(0x032) /* REFPLL Control 15 (south) */
+#define B2062_S_REFPLL_CTL16			B43_LP_SOUTH(0x033) /* REFPLL Control 16 (south) */
+#define B2062_S_RFPLL_CTL0			B43_LP_SOUTH(0x034) /* RFPLL Control 00 (south) */
+#define B2062_S_RFPLL_CTL1			B43_LP_SOUTH(0x035) /* RFPLL Control 01 (south) */
+#define B2062_S_RFPLL_CTL2			B43_LP_SOUTH(0x036) /* RFPLL Control 02 (south) */
+#define B2062_S_RFPLL_CTL3			B43_LP_SOUTH(0x037) /* RFPLL Control 03 (south) */
+#define B2062_S_RFPLL_CTL4			B43_LP_SOUTH(0x038) /* RFPLL Control 04 (south) */
+#define B2062_S_RFPLL_CTL5			B43_LP_SOUTH(0x039) /* RFPLL Control 05 (south) */
+#define B2062_S_RFPLL_CTL6			B43_LP_SOUTH(0x03A) /* RFPLL Control 06 (south) */
+#define B2062_S_RFPLL_CTL7			B43_LP_SOUTH(0x03B) /* RFPLL Control 07 (south) */
+#define B2062_S_RFPLL_CTL8			B43_LP_SOUTH(0x03C) /* RFPLL Control 08 (south) */
+#define B2062_S_RFPLL_CTL9			B43_LP_SOUTH(0x03D) /* RFPLL Control 09 (south) */
+#define B2062_S_RFPLL_CTL10			B43_LP_SOUTH(0x03E) /* RFPLL Control 10 (south) */
+#define B2062_S_RFPLL_CTL11			B43_LP_SOUTH(0x03F) /* RFPLL Control 11 (south) */
+#define B2062_S_RFPLL_CTL12			B43_LP_SOUTH(0x040) /* RFPLL Control 12 (south) */
+#define B2062_S_RFPLL_CTL13			B43_LP_SOUTH(0x041) /* RFPLL Control 13 (south) */
+#define B2062_S_RFPLL_CTL14			B43_LP_SOUTH(0x042) /* RFPLL Control 14 (south) */
+#define B2062_S_RFPLL_CTL15			B43_LP_SOUTH(0x043) /* RFPLL Control 15 (south) */
+#define B2062_S_RFPLL_CTL16			B43_LP_SOUTH(0x044) /* RFPLL Control 16 (south) */
+#define B2062_S_RFPLL_CTL17			B43_LP_SOUTH(0x045) /* RFPLL Control 17 (south) */
+#define B2062_S_RFPLL_CTL18			B43_LP_SOUTH(0x046) /* RFPLL Control 18 (south) */
+#define B2062_S_RFPLL_CTL19			B43_LP_SOUTH(0x047) /* RFPLL Control 19 (south) */
+#define B2062_S_RFPLL_CTL20			B43_LP_SOUTH(0x048) /* RFPLL Control 20 (south) */
+#define B2062_S_RFPLL_CTL21			B43_LP_SOUTH(0x049) /* RFPLL Control 21 (south) */
+#define B2062_S_RFPLL_CTL22			B43_LP_SOUTH(0x04A) /* RFPLL Control 22 (south) */
+#define B2062_S_RFPLL_CTL23			B43_LP_SOUTH(0x04B) /* RFPLL Control 23 (south) */
+#define B2062_S_RFPLL_CTL24			B43_LP_SOUTH(0x04C) /* RFPLL Control 24 (south) */
+#define B2062_S_RFPLL_CTL25			B43_LP_SOUTH(0x04D) /* RFPLL Control 25 (south) */
+#define B2062_S_RFPLL_CTL26			B43_LP_SOUTH(0x04E) /* RFPLL Control 26 (south) */
+#define B2062_S_RFPLL_CTL27			B43_LP_SOUTH(0x04F) /* RFPLL Control 27 (south) */
+#define B2062_S_RFPLL_CTL28			B43_LP_SOUTH(0x050) /* RFPLL Control 28 (south) */
+#define B2062_S_RFPLL_CTL29			B43_LP_SOUTH(0x051) /* RFPLL Control 29 (south) */
+#define B2062_S_RFPLL_CTL30			B43_LP_SOUTH(0x052) /* RFPLL Control 30 (south) */
+#define B2062_S_RFPLL_CTL31			B43_LP_SOUTH(0x053) /* RFPLL Control 31 (south) */
+#define B2062_S_RFPLL_CTL32			B43_LP_SOUTH(0x054) /* RFPLL Control 32 (south) */
+#define B2062_S_RFPLL_CTL33			B43_LP_SOUTH(0x055) /* RFPLL Control 33 (south) */
+#define B2062_S_RFPLL_CTL34			B43_LP_SOUTH(0x056) /* RFPLL Control 34 (south) */
+#define B2062_S_RXG_CNT0			B43_LP_SOUTH(0x057) /* RXG Counter 00 (south) */
+#define B2062_S_RXG_CNT1			B43_LP_SOUTH(0x058) /* RXG Counter 01 (south) */
+#define B2062_S_RXG_CNT2			B43_LP_SOUTH(0x059) /* RXG Counter 02 (south) */
+#define B2062_S_RXG_CNT3			B43_LP_SOUTH(0x05A) /* RXG Counter 03 (south) */
+#define B2062_S_RXG_CNT4			B43_LP_SOUTH(0x05B) /* RXG Counter 04 (south) */
+#define B2062_S_RXG_CNT5			B43_LP_SOUTH(0x05C) /* RXG Counter 05 (south) */
+#define B2062_S_RXG_CNT6			B43_LP_SOUTH(0x05D) /* RXG Counter 06 (south) */
+#define B2062_S_RXG_CNT7			B43_LP_SOUTH(0x05E) /* RXG Counter 07 (south) */
+#define B2062_S_RXG_CNT8			B43_LP_SOUTH(0x05F) /* RXG Counter 08 (south) */
+#define B2062_S_RXG_CNT9			B43_LP_SOUTH(0x060) /* RXG Counter 09 (south) */
+#define B2062_S_RXG_CNT10			B43_LP_SOUTH(0x061) /* RXG Counter 10 (south) */
+#define B2062_S_RXG_CNT11			B43_LP_SOUTH(0x062) /* RXG Counter 11 (south) */
+#define B2062_S_RXG_CNT12			B43_LP_SOUTH(0x063) /* RXG Counter 12 (south) */
+#define B2062_S_RXG_CNT13			B43_LP_SOUTH(0x064) /* RXG Counter 13 (south) */
+#define B2062_S_RXG_CNT14			B43_LP_SOUTH(0x065) /* RXG Counter 14 (south) */
+#define B2062_S_RXG_CNT15			B43_LP_SOUTH(0x066) /* RXG Counter 15 (south) */
+#define B2062_S_RXG_CNT16			B43_LP_SOUTH(0x067) /* RXG Counter 16 (south) */
+#define B2062_S_RXG_CNT17			B43_LP_SOUTH(0x068) /* RXG Counter 17 (south) */
+
+
+
+/*** Broadcom 2063 radio registers ***/
+#define B2063_RADIO_ID_CODE			B43_LP_RADIO(0x001) /* Radio ID code */
+#define B2063_COMM1				B43_LP_RADIO(0x000) /* Common 01 */
+#define B2063_COMM2				B43_LP_RADIO(0x002) /* Common 02 */
+#define B2063_COMM3				B43_LP_RADIO(0x003) /* Common 03 */
+#define B2063_COMM4				B43_LP_RADIO(0x004) /* Common 04 */
+#define B2063_COMM5				B43_LP_RADIO(0x005) /* Common 05 */
+#define B2063_COMM6				B43_LP_RADIO(0x006) /* Common 06 */
+#define B2063_COMM7				B43_LP_RADIO(0x007) /* Common 07 */
+#define B2063_COMM8				B43_LP_RADIO(0x008) /* Common 08 */
+#define B2063_COMM9				B43_LP_RADIO(0x009) /* Common 09 */
+#define B2063_COMM10				B43_LP_RADIO(0x00A) /* Common 10 */
+#define B2063_COMM11				B43_LP_RADIO(0x00B) /* Common 11 */
+#define B2063_COMM12				B43_LP_RADIO(0x00C) /* Common 12 */
+#define B2063_COMM13				B43_LP_RADIO(0x00D) /* Common 13 */
+#define B2063_COMM14				B43_LP_RADIO(0x00E) /* Common 14 */
+#define B2063_COMM15				B43_LP_RADIO(0x00F) /* Common 15 */
+#define B2063_COMM16				B43_LP_RADIO(0x010) /* Common 16 */
+#define B2063_COMM17				B43_LP_RADIO(0x011) /* Common 17 */
+#define B2063_COMM18				B43_LP_RADIO(0x012) /* Common 18 */
+#define B2063_COMM19				B43_LP_RADIO(0x013) /* Common 19 */
+#define B2063_COMM20				B43_LP_RADIO(0x014) /* Common 20 */
+#define B2063_COMM21				B43_LP_RADIO(0x015) /* Common 21 */
+#define B2063_COMM22				B43_LP_RADIO(0x016) /* Common 22 */
+#define B2063_COMM23				B43_LP_RADIO(0x017) /* Common 23 */
+#define B2063_COMM24				B43_LP_RADIO(0x018) /* Common 24 */
+#define B2063_PWR_SWITCH_CTL			B43_LP_RADIO(0x019) /* POWER SWITCH Control */
+#define B2063_PLL_SP1				B43_LP_RADIO(0x01A) /* PLL SP 1 */
+#define B2063_PLL_SP2				B43_LP_RADIO(0x01B) /* PLL SP 2 */
+#define B2063_LOGEN_SP1				B43_LP_RADIO(0x01C) /* LOGEN SP 1 */
+#define B2063_LOGEN_SP2				B43_LP_RADIO(0x01D) /* LOGEN SP 2 */
+#define B2063_LOGEN_SP3				B43_LP_RADIO(0x01E) /* LOGEN SP 3 */
+#define B2063_LOGEN_SP4				B43_LP_RADIO(0x01F) /* LOGEN SP 4 */
+#define B2063_LOGEN_SP5				B43_LP_RADIO(0x020) /* LOGEN SP 5 */
+#define B2063_G_RX_SP1				B43_LP_RADIO(0x021) /* G RX SP 1 */
+#define B2063_G_RX_SP2				B43_LP_RADIO(0x022) /* G RX SP 2 */
+#define B2063_G_RX_SP3				B43_LP_RADIO(0x023) /* G RX SP 3 */
+#define B2063_G_RX_SP4				B43_LP_RADIO(0x024) /* G RX SP 4 */
+#define B2063_G_RX_SP5				B43_LP_RADIO(0x025) /* G RX SP 5 */
+#define B2063_G_RX_SP6				B43_LP_RADIO(0x026) /* G RX SP 6 */
+#define B2063_G_RX_SP7				B43_LP_RADIO(0x027) /* G RX SP 7 */
+#define B2063_G_RX_SP8				B43_LP_RADIO(0x028) /* G RX SP 8 */
+#define B2063_G_RX_SP9				B43_LP_RADIO(0x029) /* G RX SP 9 */
+#define B2063_G_RX_SP10				B43_LP_RADIO(0x02A) /* G RX SP 10 */
+#define B2063_G_RX_SP11				B43_LP_RADIO(0x02B) /* G RX SP 11 */
+#define B2063_A_RX_SP1				B43_LP_RADIO(0x02C) /* A RX SP 1 */
+#define B2063_A_RX_SP2				B43_LP_RADIO(0x02D) /* A RX SP 2 */
+#define B2063_A_RX_SP3				B43_LP_RADIO(0x02E) /* A RX SP 3 */
+#define B2063_A_RX_SP4				B43_LP_RADIO(0x02F) /* A RX SP 4 */
+#define B2063_A_RX_SP5				B43_LP_RADIO(0x030) /* A RX SP 5 */
+#define B2063_A_RX_SP6				B43_LP_RADIO(0x031) /* A RX SP 6 */
+#define B2063_A_RX_SP7				B43_LP_RADIO(0x032) /* A RX SP 7 */
+#define B2063_RX_BB_SP1				B43_LP_RADIO(0x033) /* RX BB SP 1 */
+#define B2063_RX_BB_SP2				B43_LP_RADIO(0x034) /* RX BB SP 2 */
+#define B2063_RX_BB_SP3				B43_LP_RADIO(0x035) /* RX BB SP 3 */
+#define B2063_RX_BB_SP4				B43_LP_RADIO(0x036) /* RX BB SP 4 */
+#define B2063_RX_BB_SP5				B43_LP_RADIO(0x037) /* RX BB SP 5 */
+#define B2063_RX_BB_SP6				B43_LP_RADIO(0x038) /* RX BB SP 6 */
+#define B2063_RX_BB_SP7				B43_LP_RADIO(0x039) /* RX BB SP 7 */
+#define B2063_RX_BB_SP8				B43_LP_RADIO(0x03A) /* RX BB SP 8 */
+#define B2063_TX_RF_SP1				B43_LP_RADIO(0x03B) /* TX RF SP 1 */
+#define B2063_TX_RF_SP2				B43_LP_RADIO(0x03C) /* TX RF SP 2 */
+#define B2063_TX_RF_SP3				B43_LP_RADIO(0x03D) /* TX RF SP 3 */
+#define B2063_TX_RF_SP4				B43_LP_RADIO(0x03E) /* TX RF SP 4 */
+#define B2063_TX_RF_SP5				B43_LP_RADIO(0x03F) /* TX RF SP 5 */
+#define B2063_TX_RF_SP6				B43_LP_RADIO(0x040) /* TX RF SP 6 */
+#define B2063_TX_RF_SP7				B43_LP_RADIO(0x041) /* TX RF SP 7 */
+#define B2063_TX_RF_SP8				B43_LP_RADIO(0x042) /* TX RF SP 8 */
+#define B2063_TX_RF_SP9				B43_LP_RADIO(0x043) /* TX RF SP 9 */
+#define B2063_TX_RF_SP10			B43_LP_RADIO(0x044) /* TX RF SP 10 */
+#define B2063_TX_RF_SP11			B43_LP_RADIO(0x045) /* TX RF SP 11 */
+#define B2063_TX_RF_SP12			B43_LP_RADIO(0x046) /* TX RF SP 12 */
+#define B2063_TX_RF_SP13			B43_LP_RADIO(0x047) /* TX RF SP 13 */
+#define B2063_TX_RF_SP14			B43_LP_RADIO(0x048) /* TX RF SP 14 */
+#define B2063_TX_RF_SP15			B43_LP_RADIO(0x049) /* TX RF SP 15 */
+#define B2063_TX_RF_SP16			B43_LP_RADIO(0x04A) /* TX RF SP 16 */
+#define B2063_TX_RF_SP17			B43_LP_RADIO(0x04B) /* TX RF SP 17 */
+#define B2063_PA_SP1				B43_LP_RADIO(0x04C) /* PA SP 1 */
+#define B2063_PA_SP2				B43_LP_RADIO(0x04D) /* PA SP 2 */
+#define B2063_PA_SP3				B43_LP_RADIO(0x04E) /* PA SP 3 */
+#define B2063_PA_SP4				B43_LP_RADIO(0x04F) /* PA SP 4 */
+#define B2063_PA_SP5				B43_LP_RADIO(0x050) /* PA SP 5 */
+#define B2063_PA_SP6				B43_LP_RADIO(0x051) /* PA SP 6 */
+#define B2063_PA_SP7				B43_LP_RADIO(0x052) /* PA SP 7 */
+#define B2063_TX_BB_SP1				B43_LP_RADIO(0x053) /* TX BB SP 1 */
+#define B2063_TX_BB_SP2				B43_LP_RADIO(0x054) /* TX BB SP 2 */
+#define B2063_TX_BB_SP3				B43_LP_RADIO(0x055) /* TX BB SP 3 */
+#define B2063_REG_SP1				B43_LP_RADIO(0x056) /* REG SP 1 */
+#define B2063_BANDGAP_CTL1			B43_LP_RADIO(0x057) /* BANDGAP Control 1 */
+#define B2063_BANDGAP_CTL2			B43_LP_RADIO(0x058) /* BANDGAP Control 2 */
+#define B2063_LPO_CTL1				B43_LP_RADIO(0x059) /* LPO Control 1 */
+#define B2063_RC_CALIB_CTL1			B43_LP_RADIO(0x05A) /* RC Calibration Control 1 */
+#define B2063_RC_CALIB_CTL2			B43_LP_RADIO(0x05B) /* RC Calibration Control 2 */
+#define B2063_RC_CALIB_CTL3			B43_LP_RADIO(0x05C) /* RC Calibration Control 3 */
+#define B2063_RC_CALIB_CTL4			B43_LP_RADIO(0x05D) /* RC Calibration Control 4 */
+#define B2063_RC_CALIB_CTL5			B43_LP_RADIO(0x05E) /* RC Calibration Control 5 */
+#define B2063_RC_CALIB_CTL6			B43_LP_RADIO(0x05F) /* RC Calibration Control 6 */
+#define B2063_RC_CALIB_CTL7			B43_LP_RADIO(0x060) /* RC Calibration Control 7 */
+#define B2063_RC_CALIB_CTL8			B43_LP_RADIO(0x061) /* RC Calibration Control 8 */
+#define B2063_RC_CALIB_CTL9			B43_LP_RADIO(0x062) /* RC Calibration Control 9 */
+#define B2063_RC_CALIB_CTL10			B43_LP_RADIO(0x063) /* RC Calibration Control 10 */
+#define B2063_PLL_JTAG_CALNRST			B43_LP_RADIO(0x064) /* PLL JTAG CALNRST */
+#define B2063_PLL_JTAG_IN_PLL1			B43_LP_RADIO(0x065) /* PLL JTAG IN PLL 1 */
+#define B2063_PLL_JTAG_IN_PLL2			B43_LP_RADIO(0x066) /* PLL JTAG IN PLL 2 */
+#define B2063_PLL_JTAG_PLL_CP1			B43_LP_RADIO(0x067) /* PLL JTAG PLL CP 1 */
+#define B2063_PLL_JTAG_PLL_CP2			B43_LP_RADIO(0x068) /* PLL JTAG PLL CP 2 */
+#define B2063_PLL_JTAG_PLL_CP3			B43_LP_RADIO(0x069) /* PLL JTAG PLL CP 3 */
+#define B2063_PLL_JTAG_PLL_CP4			B43_LP_RADIO(0x06A) /* PLL JTAG PLL CP 4 */
+#define B2063_PLL_JTAG_PLL_CTL1			B43_LP_RADIO(0x06B) /* PLL JTAG PLL Control 1 */
+#define B2063_PLL_JTAG_PLL_LF1			B43_LP_RADIO(0x06C) /* PLL JTAG PLL LF 1 */
+#define B2063_PLL_JTAG_PLL_LF2			B43_LP_RADIO(0x06D) /* PLL JTAG PLL LF 2 */
+#define B2063_PLL_JTAG_PLL_LF3			B43_LP_RADIO(0x06E) /* PLL JTAG PLL LF 3 */
+#define B2063_PLL_JTAG_PLL_LF4			B43_LP_RADIO(0x06F) /* PLL JTAG PLL LF 4 */
+#define B2063_PLL_JTAG_PLL_SG1			B43_LP_RADIO(0x070) /* PLL JTAG PLL SG 1 */
+#define B2063_PLL_JTAG_PLL_SG2			B43_LP_RADIO(0x071) /* PLL JTAG PLL SG 2 */
+#define B2063_PLL_JTAG_PLL_SG3			B43_LP_RADIO(0x072) /* PLL JTAG PLL SG 3 */
+#define B2063_PLL_JTAG_PLL_SG4			B43_LP_RADIO(0x073) /* PLL JTAG PLL SG 4 */
+#define B2063_PLL_JTAG_PLL_SG5			B43_LP_RADIO(0x074) /* PLL JTAG PLL SG 5 */
+#define B2063_PLL_JTAG_PLL_VCO1			B43_LP_RADIO(0x075) /* PLL JTAG PLL VCO 1 */
+#define B2063_PLL_JTAG_PLL_VCO2			B43_LP_RADIO(0x076) /* PLL JTAG PLL VCO 2 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB1		B43_LP_RADIO(0x077) /* PLL JTAG PLL VCO Calibration 1 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB2		B43_LP_RADIO(0x078) /* PLL JTAG PLL VCO Calibration 2 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB3		B43_LP_RADIO(0x079) /* PLL JTAG PLL VCO Calibration 3 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB4		B43_LP_RADIO(0x07A) /* PLL JTAG PLL VCO Calibration 4 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB5		B43_LP_RADIO(0x07B) /* PLL JTAG PLL VCO Calibration 5 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB6		B43_LP_RADIO(0x07C) /* PLL JTAG PLL VCO Calibration 6 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB7		B43_LP_RADIO(0x07D) /* PLL JTAG PLL VCO Calibration 7 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB8		B43_LP_RADIO(0x07E) /* PLL JTAG PLL VCO Calibration 8 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB9		B43_LP_RADIO(0x07F) /* PLL JTAG PLL VCO Calibration 9 */
+#define B2063_PLL_JTAG_PLL_VCO_CALIB10		B43_LP_RADIO(0x080) /* PLL JTAG PLL VCO Calibration 10 */
+#define B2063_PLL_JTAG_PLL_XTAL_12		B43_LP_RADIO(0x081) /* PLL JTAG PLL XTAL 1 2 */
+#define B2063_PLL_JTAG_PLL_XTAL3		B43_LP_RADIO(0x082) /* PLL JTAG PLL XTAL 3 */
+#define B2063_LOGEN_ACL1			B43_LP_RADIO(0x083) /* LOGEN ACL 1 */
+#define B2063_LOGEN_ACL2			B43_LP_RADIO(0x084) /* LOGEN ACL 2 */
+#define B2063_LOGEN_ACL3			B43_LP_RADIO(0x085) /* LOGEN ACL 3 */
+#define B2063_LOGEN_ACL4			B43_LP_RADIO(0x086) /* LOGEN ACL 4 */
+#define B2063_LOGEN_ACL5			B43_LP_RADIO(0x087) /* LOGEN ACL 5 */
+#define B2063_LO_CALIB_INPUTS			B43_LP_RADIO(0x088) /* LO Calibration INPUTS */
+#define B2063_LO_CALIB_CTL1			B43_LP_RADIO(0x089) /* LO Calibration Control 1 */
+#define B2063_LO_CALIB_CTL2			B43_LP_RADIO(0x08A) /* LO Calibration Control 2 */
+#define B2063_LO_CALIB_CTL3			B43_LP_RADIO(0x08B) /* LO Calibration Control 3 */
+#define B2063_LO_CALIB_WAITCNT			B43_LP_RADIO(0x08C) /* LO Calibration WAITCNT */
+#define B2063_LO_CALIB_OVR1			B43_LP_RADIO(0x08D) /* LO Calibration OVR 1 */
+#define B2063_LO_CALIB_OVR2			B43_LP_RADIO(0x08E) /* LO Calibration OVR 2 */
+#define B2063_LO_CALIB_OVAL1			B43_LP_RADIO(0x08F) /* LO Calibration OVAL 1 */
+#define B2063_LO_CALIB_OVAL2			B43_LP_RADIO(0x090) /* LO Calibration OVAL 2 */
+#define B2063_LO_CALIB_OVAL3			B43_LP_RADIO(0x091) /* LO Calibration OVAL 3 */
+#define B2063_LO_CALIB_OVAL4			B43_LP_RADIO(0x092) /* LO Calibration OVAL 4 */
+#define B2063_LO_CALIB_OVAL5			B43_LP_RADIO(0x093) /* LO Calibration OVAL 5 */
+#define B2063_LO_CALIB_OVAL6			B43_LP_RADIO(0x094) /* LO Calibration OVAL 6 */
+#define B2063_LO_CALIB_OVAL7			B43_LP_RADIO(0x095) /* LO Calibration OVAL 7 */
+#define B2063_LO_CALIB_CALVLD1			B43_LP_RADIO(0x096) /* LO Calibration CALVLD 1 */
+#define B2063_LO_CALIB_CALVLD2			B43_LP_RADIO(0x097) /* LO Calibration CALVLD 2 */
+#define B2063_LO_CALIB_CVAL1			B43_LP_RADIO(0x098) /* LO Calibration CVAL 1 */
+#define B2063_LO_CALIB_CVAL2			B43_LP_RADIO(0x099) /* LO Calibration CVAL 2 */
+#define B2063_LO_CALIB_CVAL3			B43_LP_RADIO(0x09A) /* LO Calibration CVAL 3 */
+#define B2063_LO_CALIB_CVAL4			B43_LP_RADIO(0x09B) /* LO Calibration CVAL 4 */
+#define B2063_LO_CALIB_CVAL5			B43_LP_RADIO(0x09C) /* LO Calibration CVAL 5 */
+#define B2063_LO_CALIB_CVAL6			B43_LP_RADIO(0x09D) /* LO Calibration CVAL 6 */
+#define B2063_LO_CALIB_CVAL7			B43_LP_RADIO(0x09E) /* LO Calibration CVAL 7 */
+#define B2063_LOGEN_CALIB_EN			B43_LP_RADIO(0x09F) /* LOGEN Calibration EN */
+#define B2063_LOGEN_PEAKDET1			B43_LP_RADIO(0x0A0) /* LOGEN PEAKDET 1 */
+#define B2063_LOGEN_RCCR1			B43_LP_RADIO(0x0A1) /* LOGEN RCCR 1 */
+#define B2063_LOGEN_VCOBUF1			B43_LP_RADIO(0x0A2) /* LOGEN VCOBUF 1 */
+#define B2063_LOGEN_MIXER1			B43_LP_RADIO(0x0A3) /* LOGEN MIXER 1 */
+#define B2063_LOGEN_MIXER2			B43_LP_RADIO(0x0A4) /* LOGEN MIXER 2 */
+#define B2063_LOGEN_BUF1			B43_LP_RADIO(0x0A5) /* LOGEN BUF 1 */
+#define B2063_LOGEN_BUF2			B43_LP_RADIO(0x0A6) /* LOGEN BUF 2 */
+#define B2063_LOGEN_DIV1			B43_LP_RADIO(0x0A7) /* LOGEN DIV 1 */
+#define B2063_LOGEN_DIV2			B43_LP_RADIO(0x0A8) /* LOGEN DIV 2 */
+#define B2063_LOGEN_DIV3			B43_LP_RADIO(0x0A9) /* LOGEN DIV 3 */
+#define B2063_LOGEN_CBUFRX1			B43_LP_RADIO(0x0AA) /* LOGEN CBUFRX 1 */
+#define B2063_LOGEN_CBUFRX2			B43_LP_RADIO(0x0AB) /* LOGEN CBUFRX 2 */
+#define B2063_LOGEN_CBUFTX1			B43_LP_RADIO(0x0AC) /* LOGEN CBUFTX 1 */
+#define B2063_LOGEN_CBUFTX2			B43_LP_RADIO(0x0AD) /* LOGEN CBUFTX 2 */
+#define B2063_LOGEN_IDAC1			B43_LP_RADIO(0x0AE) /* LOGEN IDAC 1 */
+#define B2063_LOGEN_SPARE1			B43_LP_RADIO(0x0AF) /* LOGEN SPARE 1 */
+#define B2063_LOGEN_SPARE2			B43_LP_RADIO(0x0B0) /* LOGEN SPARE 2 */
+#define B2063_LOGEN_SPARE3			B43_LP_RADIO(0x0B1) /* LOGEN SPARE 3 */
+#define B2063_G_RX_1ST1				B43_LP_RADIO(0x0B2) /* G RX 1ST 1 */
+#define B2063_G_RX_1ST2				B43_LP_RADIO(0x0B3) /* G RX 1ST 2 */
+#define B2063_G_RX_1ST3				B43_LP_RADIO(0x0B4) /* G RX 1ST 3 */
+#define B2063_G_RX_2ND1				B43_LP_RADIO(0x0B5) /* G RX 2ND 1 */
+#define B2063_G_RX_2ND2				B43_LP_RADIO(0x0B6) /* G RX 2ND 2 */
+#define B2063_G_RX_2ND3				B43_LP_RADIO(0x0B7) /* G RX 2ND 3 */
+#define B2063_G_RX_2ND4				B43_LP_RADIO(0x0B8) /* G RX 2ND 4 */
+#define B2063_G_RX_2ND5				B43_LP_RADIO(0x0B9) /* G RX 2ND 5 */
+#define B2063_G_RX_2ND6				B43_LP_RADIO(0x0BA) /* G RX 2ND 6 */
+#define B2063_G_RX_2ND7				B43_LP_RADIO(0x0BB) /* G RX 2ND 7 */
+#define B2063_G_RX_2ND8				B43_LP_RADIO(0x0BC) /* G RX 2ND 8 */
+#define B2063_G_RX_PS1				B43_LP_RADIO(0x0BD) /* G RX PS 1 */
+#define B2063_G_RX_PS2				B43_LP_RADIO(0x0BE) /* G RX PS 2 */
+#define B2063_G_RX_PS3				B43_LP_RADIO(0x0BF) /* G RX PS 3 */
+#define B2063_G_RX_PS4				B43_LP_RADIO(0x0C0) /* G RX PS 4 */
+#define B2063_G_RX_PS5				B43_LP_RADIO(0x0C1) /* G RX PS 5 */
+#define B2063_G_RX_MIX1				B43_LP_RADIO(0x0C2) /* G RX MIX 1 */
+#define B2063_G_RX_MIX2				B43_LP_RADIO(0x0C3) /* G RX MIX 2 */
+#define B2063_G_RX_MIX3				B43_LP_RADIO(0x0C4) /* G RX MIX 3 */
+#define B2063_G_RX_MIX4				B43_LP_RADIO(0x0C5) /* G RX MIX 4 */
+#define B2063_G_RX_MIX5				B43_LP_RADIO(0x0C6) /* G RX MIX 5 */
+#define B2063_G_RX_MIX6				B43_LP_RADIO(0x0C7) /* G RX MIX 6 */
+#define B2063_G_RX_MIX7				B43_LP_RADIO(0x0C8) /* G RX MIX 7 */
+#define B2063_G_RX_MIX8				B43_LP_RADIO(0x0C9) /* G RX MIX 8 */
+#define B2063_G_RX_PDET1			B43_LP_RADIO(0x0CA) /* G RX PDET 1 */
+#define B2063_G_RX_SPARES1			B43_LP_RADIO(0x0CB) /* G RX SPARES 1 */
+#define B2063_G_RX_SPARES2			B43_LP_RADIO(0x0CC) /* G RX SPARES 2 */
+#define B2063_G_RX_SPARES3			B43_LP_RADIO(0x0CD) /* G RX SPARES 3 */
+#define B2063_A_RX_1ST1				B43_LP_RADIO(0x0CE) /* A RX 1ST 1 */
+#define B2063_A_RX_1ST2				B43_LP_RADIO(0x0CF) /* A RX 1ST 2 */
+#define B2063_A_RX_1ST3				B43_LP_RADIO(0x0D0) /* A RX 1ST 3 */
+#define B2063_A_RX_1ST4				B43_LP_RADIO(0x0D1) /* A RX 1ST 4 */
+#define B2063_A_RX_1ST5				B43_LP_RADIO(0x0D2) /* A RX 1ST 5 */
+#define B2063_A_RX_2ND1				B43_LP_RADIO(0x0D3) /* A RX 2ND 1 */
+#define B2063_A_RX_2ND2				B43_LP_RADIO(0x0D4) /* A RX 2ND 2 */
+#define B2063_A_RX_2ND3				B43_LP_RADIO(0x0D5) /* A RX 2ND 3 */
+#define B2063_A_RX_2ND4				B43_LP_RADIO(0x0D6) /* A RX 2ND 4 */
+#define B2063_A_RX_2ND5				B43_LP_RADIO(0x0D7) /* A RX 2ND 5 */
+#define B2063_A_RX_2ND6				B43_LP_RADIO(0x0D8) /* A RX 2ND 6 */
+#define B2063_A_RX_2ND7				B43_LP_RADIO(0x0D9) /* A RX 2ND 7 */
+#define B2063_A_RX_PS1				B43_LP_RADIO(0x0DA) /* A RX PS 1 */
+#define B2063_A_RX_PS2				B43_LP_RADIO(0x0DB) /* A RX PS 2 */
+#define B2063_A_RX_PS3				B43_LP_RADIO(0x0DC) /* A RX PS 3 */
+#define B2063_A_RX_PS4				B43_LP_RADIO(0x0DD) /* A RX PS 4 */
+#define B2063_A_RX_PS5				B43_LP_RADIO(0x0DE) /* A RX PS 5 */
+#define B2063_A_RX_PS6				B43_LP_RADIO(0x0DF) /* A RX PS 6 */
+#define B2063_A_RX_MIX1				B43_LP_RADIO(0x0E0) /* A RX MIX 1 */
+#define B2063_A_RX_MIX2				B43_LP_RADIO(0x0E1) /* A RX MIX 2 */
+#define B2063_A_RX_MIX3				B43_LP_RADIO(0x0E2) /* A RX MIX 3 */
+#define B2063_A_RX_MIX4				B43_LP_RADIO(0x0E3) /* A RX MIX 4 */
+#define B2063_A_RX_MIX5				B43_LP_RADIO(0x0E4) /* A RX MIX 5 */
+#define B2063_A_RX_MIX6				B43_LP_RADIO(0x0E5) /* A RX MIX 6 */
+#define B2063_A_RX_MIX7				B43_LP_RADIO(0x0E6) /* A RX MIX 7 */
+#define B2063_A_RX_MIX8				B43_LP_RADIO(0x0E7) /* A RX MIX 8 */
+#define B2063_A_RX_PWRDET1			B43_LP_RADIO(0x0E8) /* A RX PWRDET 1 */
+#define B2063_A_RX_SPARE1			B43_LP_RADIO(0x0E9) /* A RX SPARE 1 */
+#define B2063_A_RX_SPARE2			B43_LP_RADIO(0x0EA) /* A RX SPARE 2 */
+#define B2063_A_RX_SPARE3			B43_LP_RADIO(0x0EB) /* A RX SPARE 3 */
+#define B2063_RX_TIA_CTL1			B43_LP_RADIO(0x0EC) /* RX TIA Control 1 */
+#define B2063_RX_TIA_CTL2			B43_LP_RADIO(0x0ED) /* RX TIA Control 2 */
+#define B2063_RX_TIA_CTL3			B43_LP_RADIO(0x0EE) /* RX TIA Control 3 */
+#define B2063_RX_TIA_CTL4			B43_LP_RADIO(0x0EF) /* RX TIA Control 4 */
+#define B2063_RX_TIA_CTL5			B43_LP_RADIO(0x0F0) /* RX TIA Control 5 */
+#define B2063_RX_TIA_CTL6			B43_LP_RADIO(0x0F1) /* RX TIA Control 6 */
+#define B2063_RX_BB_CTL1			B43_LP_RADIO(0x0F2) /* RX BB Control 1 */
+#define B2063_RX_BB_CTL2			B43_LP_RADIO(0x0F3) /* RX BB Control 2 */
+#define B2063_RX_BB_CTL3			B43_LP_RADIO(0x0F4) /* RX BB Control 3 */
+#define B2063_RX_BB_CTL4			B43_LP_RADIO(0x0F5) /* RX BB Control 4 */
+#define B2063_RX_BB_CTL5			B43_LP_RADIO(0x0F6) /* RX BB Control 5 */
+#define B2063_RX_BB_CTL6			B43_LP_RADIO(0x0F7) /* RX BB Control 6 */
+#define B2063_RX_BB_CTL7			B43_LP_RADIO(0x0F8) /* RX BB Control 7 */
+#define B2063_RX_BB_CTL8			B43_LP_RADIO(0x0F9) /* RX BB Control 8 */
+#define B2063_RX_BB_CTL9			B43_LP_RADIO(0x0FA) /* RX BB Control 9 */
+#define B2063_TX_RF_CTL1			B43_LP_RADIO(0x0FB) /* TX RF Control 1 */
+#define B2063_TX_RF_IDAC_LO_RF_I		B43_LP_RADIO(0x0FC) /* TX RF IDAC LO RF I */
+#define B2063_TX_RF_IDAC_LO_RF_Q		B43_LP_RADIO(0x0FD) /* TX RF IDAC LO RF Q */
+#define B2063_TX_RF_IDAC_LO_BB_I		B43_LP_RADIO(0x0FE) /* TX RF IDAC LO BB I */
+#define B2063_TX_RF_IDAC_LO_BB_Q		B43_LP_RADIO(0x0FF) /* TX RF IDAC LO BB Q */
+#define B2063_TX_RF_CTL2			B43_LP_RADIO(0x100) /* TX RF Control 2 */
+#define B2063_TX_RF_CTL3			B43_LP_RADIO(0x101) /* TX RF Control 3 */
+#define B2063_TX_RF_CTL4			B43_LP_RADIO(0x102) /* TX RF Control 4 */
+#define B2063_TX_RF_CTL5			B43_LP_RADIO(0x103) /* TX RF Control 5 */
+#define B2063_TX_RF_CTL6			B43_LP_RADIO(0x104) /* TX RF Control 6 */
+#define B2063_TX_RF_CTL7			B43_LP_RADIO(0x105) /* TX RF Control 7 */
+#define B2063_TX_RF_CTL8			B43_LP_RADIO(0x106) /* TX RF Control 8 */
+#define B2063_TX_RF_CTL9			B43_LP_RADIO(0x107) /* TX RF Control 9 */
+#define B2063_TX_RF_CTL10			B43_LP_RADIO(0x108) /* TX RF Control 10 */
+#define B2063_TX_RF_CTL14			B43_LP_RADIO(0x109) /* TX RF Control 14 */
+#define B2063_TX_RF_CTL15			B43_LP_RADIO(0x10A) /* TX RF Control 15 */
+#define B2063_PA_CTL1				B43_LP_RADIO(0x10B) /* PA Control 1 */
+#define B2063_PA_CTL2				B43_LP_RADIO(0x10C) /* PA Control 2 */
+#define B2063_PA_CTL3				B43_LP_RADIO(0x10D) /* PA Control 3 */
+#define B2063_PA_CTL4				B43_LP_RADIO(0x10E) /* PA Control 4 */
+#define B2063_PA_CTL5				B43_LP_RADIO(0x10F) /* PA Control 5 */
+#define B2063_PA_CTL6				B43_LP_RADIO(0x110) /* PA Control 6 */
+#define B2063_PA_CTL7				B43_LP_RADIO(0x111) /* PA Control 7 */
+#define B2063_PA_CTL8				B43_LP_RADIO(0x112) /* PA Control 8 */
+#define B2063_PA_CTL9				B43_LP_RADIO(0x113) /* PA Control 9 */
+#define B2063_PA_CTL10				B43_LP_RADIO(0x114) /* PA Control 10 */
+#define B2063_PA_CTL11				B43_LP_RADIO(0x115) /* PA Control 11 */
+#define B2063_PA_CTL12				B43_LP_RADIO(0x116) /* PA Control 12 */
+#define B2063_PA_CTL13				B43_LP_RADIO(0x117) /* PA Control 13 */
+#define B2063_TX_BB_CTL1			B43_LP_RADIO(0x118) /* TX BB Control 1 */
+#define B2063_TX_BB_CTL2			B43_LP_RADIO(0x119) /* TX BB Control 2 */
+#define B2063_TX_BB_CTL3			B43_LP_RADIO(0x11A) /* TX BB Control 3 */
+#define B2063_TX_BB_CTL4			B43_LP_RADIO(0x11B) /* TX BB Control 4 */
+#define B2063_GPIO_CTL1				B43_LP_RADIO(0x11C) /* GPIO Control 1 */
+#define B2063_VREG_CTL1				B43_LP_RADIO(0x11D) /* VREG Control 1 */
+#define B2063_AMUX_CTL1				B43_LP_RADIO(0x11E) /* AMUX Control 1 */
+#define B2063_IQ_CALIB_GVAR			B43_LP_RADIO(0x11F) /* IQ Calibration GVAR */
+#define B2063_IQ_CALIB_CTL1			B43_LP_RADIO(0x120) /* IQ Calibration Control 1 */
+#define B2063_IQ_CALIB_CTL2			B43_LP_RADIO(0x121) /* IQ Calibration Control 2 */
+#define B2063_TEMPSENSE_CTL1			B43_LP_RADIO(0x122) /* TEMPSENSE Control 1 */
+#define B2063_TEMPSENSE_CTL2			B43_LP_RADIO(0x123) /* TEMPSENSE Control 2 */
+#define B2063_TX_RX_LOOPBACK1			B43_LP_RADIO(0x124) /* TX/RX LOOPBACK 1 */
+#define B2063_TX_RX_LOOPBACK2			B43_LP_RADIO(0x125) /* TX/RX LOOPBACK 2 */
+#define B2063_EXT_TSSI_CTL1			B43_LP_RADIO(0x126) /* EXT TSSI Control 1 */
+#define B2063_EXT_TSSI_CTL2			B43_LP_RADIO(0x127) /* EXT TSSI Control 2 */
+#define B2063_AFE_CTL				B43_LP_RADIO(0x128) /* AFE Control */
+
+
+
+struct b43_phy_lp {
+	//TODO
+};
+
+
+struct b43_phy_operations;
+extern const struct b43_phy_operations b43_phyops_lp;
+
+#endif /* LINUX_B43_PHY_LP_H_ */

drivers/net/wireless/b43/nphy.c → drivers/net/wireless/b43/phy_n.c

@@ -26,7 +26,7 @@
 #include <linux/types.h>
 
 #include "b43.h"
-#include "nphy.h"
+#include "phy_n.h"
 #include "tables_nphy.h"
 
 
@@ -499,35 +499,31 @@ static int b43_nphy_op_allocate(struct b43_wldev *dev)
 		return -ENOMEM;
 	dev->phy.n = nphy;
 
-	//TODO init struct b43_phy_n
-
 	return 0;
 }
 
-static int b43_nphy_op_init(struct b43_wldev *dev)
+static void b43_nphy_op_prepare_structs(struct b43_wldev *dev)
 {
-	struct b43_phy_n *nphy = dev->phy.n;
-	int err;
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = phy->n;
 
-	err = b43_phy_initn(dev);
-	if (err)
-		return err;
-	nphy->initialised = 1;
+	memset(nphy, 0, sizeof(*nphy));
 
-	return 0;
+	//TODO init struct b43_phy_n
 }
 
-static void b43_nphy_op_exit(struct b43_wldev *dev)
+static void b43_nphy_op_free(struct b43_wldev *dev)
 {
-	struct b43_phy_n *nphy = dev->phy.n;
+	struct b43_phy *phy = &dev->phy;
+	struct b43_phy_n *nphy = phy->n;
 
-	if (nphy->initialised) {
-		//TODO
-		nphy->initialised = 0;
-	}
-	//TODO
 	kfree(nphy);
-	dev->phy.n = NULL;
+	phy->n = NULL;
+}
+
+static int b43_nphy_op_init(struct b43_wldev *dev)
+{
+	return b43_phy_initn(dev);
 }
 
 static inline void check_phyreg(struct b43_wldev *dev, u16 offset)
@@ -587,6 +583,12 @@ static void b43_nphy_op_software_rfkill(struct b43_wldev *dev,
 {//TODO
 }
 
+static void b43_nphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+	b43_phy_write(dev, B43_NPHY_AFECTL_OVER,
+		      on ? 0 : 0x7FFF);
+}
+
 static int b43_nphy_op_switch_channel(struct b43_wldev *dev,
 				      unsigned int new_channel)
 {
@@ -610,13 +612,15 @@ static unsigned int b43_nphy_op_get_default_chan(struct b43_wldev *dev)
 
 const struct b43_phy_operations b43_phyops_n = {
 	.allocate		= b43_nphy_op_allocate,
+	.free			= b43_nphy_op_free,
+	.prepare_structs	= b43_nphy_op_prepare_structs,
 	.init			= b43_nphy_op_init,
-	.exit			= b43_nphy_op_exit,
 	.phy_read		= b43_nphy_op_read,
 	.phy_write		= b43_nphy_op_write,
 	.radio_read		= b43_nphy_op_radio_read,
 	.radio_write		= b43_nphy_op_radio_write,
 	.software_rfkill	= b43_nphy_op_software_rfkill,
+	.switch_analog		= b43_nphy_op_switch_analog,
 	.switch_channel		= b43_nphy_op_switch_channel,
 	.get_default_chan	= b43_nphy_op_get_default_chan,
 	.recalc_txpower		= b43_nphy_op_recalc_txpower,

drivers/net/wireless/b43/nphy.h → drivers/net/wireless/b43/phy_n.h

@@ -920,8 +920,6 @@
 struct b43_wldev;
 
 struct b43_phy_n {
-	bool initialised;
-
 	//TODO lots of missing stuff
 };
 

drivers/net/wireless/b43/tables_nphy.c

@@ -25,7 +25,7 @@
 #include "b43.h"
 #include "tables_nphy.h"
 #include "phy_common.h"
-#include "nphy.h"
+#include "phy_n.h"
 
 
 struct b2055_inittab_entry {

drivers/net/wireless/b43legacy/main.c

@@ -3704,6 +3704,11 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_WDS) |
+		BIT(NL80211_IFTYPE_ADHOC);
 	hw->queues = 1; /* FIXME: hardware has more queues */
 	SET_IEEE80211_DEV(hw, dev->dev);
 	if (is_valid_ether_addr(sprom->et1mac))

drivers/net/wireless/iwlwifi/iwl-3945-io.h

@@ -59,7 +59,7 @@
  *
  */
 
-#define _iwl3945_write32(priv, ofs, val) writel((val), (priv)->hw_base + (ofs))
+#define _iwl3945_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs))
 #ifdef CONFIG_IWL3945_DEBUG
 static inline void __iwl3945_write32(const char *f, u32 l, struct iwl3945_priv *priv,
 				 u32 ofs, u32 val)
@@ -73,14 +73,14 @@ static inline void __iwl3945_write32(const char *f, u32 l, struct iwl3945_priv *
 #define iwl3945_write32(priv, ofs, val) _iwl3945_write32(priv, ofs, val)
 #endif
 
-#define _iwl3945_read32(priv, ofs) readl((priv)->hw_base + (ofs))
+#define _iwl3945_read32(priv, ofs) ioread32((priv)->hw_base + (ofs))
 #ifdef CONFIG_IWL3945_DEBUG
 static inline u32 __iwl3945_read32(char *f, u32 l, struct iwl3945_priv *priv, u32 ofs)
 {
 	IWL_DEBUG_IO("read_direct32(0x%08X) - %s %d\n", ofs, f, l);
 	return _iwl3945_read32(priv, ofs);
 }
-#define iwl3945_read32(priv, ofs) __iwl3945_read32(__FILE__, __LINE__, priv, ofs)
+#define iwl3945_read32(priv, ofs)__iwl3945_read32(__FILE__, __LINE__, priv, ofs)
 #else
 #define iwl3945_read32(p, o) _iwl3945_read32(p, o)
 #endif
@@ -153,28 +153,10 @@ static inline void __iwl3945_clear_bit(const char *f, u32 l,
 static inline int _iwl3945_grab_nic_access(struct iwl3945_priv *priv)
 {
 	int ret;
-	u32 gp_ctl;
-
 #ifdef CONFIG_IWL3945_DEBUG
 	if (atomic_read(&priv->restrict_refcnt))
 		return 0;
 #endif
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-	    test_bit(STATUS_RF_KILL_SW, &priv->status)) {
-		IWL_WARNING("WARNING: Requesting MAC access during RFKILL "
-			"wakes up NIC\n");
-
-		/* 10 msec allows time for NIC to complete its data save */
-		gp_ctl = _iwl3945_read32(priv, CSR_GP_CNTRL);
-		if (gp_ctl & CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY) {
-			IWL_DEBUG_RF_KILL("Wait for complete power-down, "
-				"gpctl = 0x%08x\n", gp_ctl);
-			mdelay(10);
-		} else
-			IWL_DEBUG_RF_KILL("power-down complete, "
-					  "gpctl = 0x%08x\n", gp_ctl);
-	}
-
 	/* this bit wakes up the NIC */
 	_iwl3945_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 	ret = _iwl3945_poll_bit(priv, CSR_GP_CNTRL,

drivers/net/wireless/iwlwifi/iwl-3945.c

@@ -688,87 +688,6 @@ static void iwl3945_rx_reply_rx(struct iwl3945_priv *priv,
 
 	switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) {
 	case IEEE80211_FTYPE_MGMT:
-		switch (le16_to_cpu(header->frame_control) &
-			IEEE80211_FCTL_STYPE) {
-		case IEEE80211_STYPE_PROBE_RESP:
-		case IEEE80211_STYPE_BEACON:{
-				/* If this is a beacon or probe response for
-				 * our network then cache the beacon
-				 * timestamp */
-				if ((((priv->iw_mode == IEEE80211_IF_TYPE_STA)
-				      && !compare_ether_addr(header->addr2,
-							     priv->bssid)) ||
-				     ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
-				      && !compare_ether_addr(header->addr3,
-							     priv->bssid)))) {
-					struct ieee80211_mgmt *mgmt =
-					    (struct ieee80211_mgmt *)header;
-					__le32 *pos;
-					pos = (__le32 *)&mgmt->u.beacon.
-					    timestamp;
-					priv->timestamp0 = le32_to_cpu(pos[0]);
-					priv->timestamp1 = le32_to_cpu(pos[1]);
-					priv->beacon_int = le16_to_cpu(
-					    mgmt->u.beacon.beacon_int);
-					if (priv->call_post_assoc_from_beacon &&
-					    (priv->iw_mode ==
-						IEEE80211_IF_TYPE_STA))
-						queue_work(priv->workqueue,
-						    &priv->post_associate.work);
-
-					priv->call_post_assoc_from_beacon = 0;
-				}
-
-				break;
-			}
-
-		case IEEE80211_STYPE_ACTION:
-			/* TODO: Parse 802.11h frames for CSA... */
-			break;
-
-			/*
-			 * TODO: Use the new callback function from
-			 * mac80211 instead of sniffing these packets.
-			 */
-		case IEEE80211_STYPE_ASSOC_RESP:
-		case IEEE80211_STYPE_REASSOC_RESP:{
-				struct ieee80211_mgmt *mgnt =
-				    (struct ieee80211_mgmt *)header;
-
-				/* We have just associated, give some
-				 * time for the 4-way handshake if
-				 * any. Don't start scan too early. */
-				priv->next_scan_jiffies = jiffies +
-					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
-
-				priv->assoc_id = (~((1 << 15) | (1 << 14)) &
-						  le16_to_cpu(mgnt->u.
-							      assoc_resp.aid));
-				priv->assoc_capability =
-				    le16_to_cpu(mgnt->u.assoc_resp.capab_info);
-				if (priv->beacon_int)
-					queue_work(priv->workqueue,
-					    &priv->post_associate.work);
-				else
-					priv->call_post_assoc_from_beacon = 1;
-				break;
-			}
-
-		case IEEE80211_STYPE_PROBE_REQ:{
-				DECLARE_MAC_BUF(mac1);
-				DECLARE_MAC_BUF(mac2);
-				DECLARE_MAC_BUF(mac3);
-				if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
-					IWL_DEBUG_DROP
-					    ("Dropping (non network): %s"
-					     ", %s, %s\n",
-					     print_mac(mac1, header->addr1),
-					     print_mac(mac2, header->addr2),
-					     print_mac(mac3, header->addr3));
-				return;
-			}
-		}
-
 	case IEEE80211_FTYPE_DATA:
 		/* fall through */
 	default:

drivers/net/wireless/iwlwifi/iwl-3945.h

@@ -894,7 +894,6 @@ struct iwl3945_priv {
 	struct delayed_work thermal_periodic;
 	struct delayed_work gather_stats;
 	struct delayed_work scan_check;
-	struct delayed_work post_associate;
 
 #define IWL_DEFAULT_TX_POWER 0x0F
 	s8 user_txpower_limit;

drivers/net/wireless/iwlwifi/iwl-4965-hw.h

@@ -98,16 +98,17 @@
 #define IWL_RSSI_OFFSET	44
 
 
-#include "iwl-commands.h"
 
 /* PCI registers */
-#define PCI_LINK_CTRL      0x0F0	/* 1 byte */
-#define PCI_POWER_SOURCE   0x0C8
-#define PCI_REG_WUM8       0x0E8
+#define PCI_CFG_RETRY_TIMEOUT	0x041
+#define PCI_CFG_POWER_SOURCE	0x0C8
+#define PCI_REG_WUM8		0x0E8
+#define PCI_CFG_LINK_CTRL	0x0F0
 
 /* PCI register values */
-#define PCI_LINK_VAL_L0S_EN	0x01
-#define PCI_LINK_VAL_L1_EN	0x02
+#define PCI_CFG_LINK_CTRL_VAL_L0S_EN	0x01
+#define PCI_CFG_LINK_CTRL_VAL_L1_EN	0x02
+#define PCI_CFG_CMD_REG_INT_DIS_MSK	0x04
 #define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT         (0x80000000)
 
 #define TFD_QUEUE_SIZE_MAX      (256)

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -399,7 +399,7 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
 	unsigned long flags;
 	u32 val;
 	u16 radio_cfg;
-	u8 val_link;
+	u16 link;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
@@ -410,10 +410,10 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
 				       val & ~(1 << 11));
 	}
 
-	pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
+	pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link);
 
 	/* L1 is enabled by BIOS */
-	if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
+	if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
 		/* diable L0S disabled L1A enabled */
 		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 	else

drivers/net/wireless/iwlwifi/iwl-5000-hw.h

@@ -129,6 +129,13 @@ struct iwl5000_shared {
 	__le32 padding2;
 } __attribute__ ((packed));
 
+/* calibrations defined for 5000 */
+/* defines the order in which results should be sent to the runtime uCode */
+enum iwl5000_calib {
+	IWL5000_CALIB_LO,
+	IWL5000_CALIB_TX_IQ,
+	IWL5000_CALIB_TX_IQ_PERD,
+};
 
 #endif /* __iwl_5000_hw_h__ */
 

drivers/net/wireless/iwlwifi/iwl-5000.c

@@ -208,14 +208,14 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
 {
 	unsigned long flags;
 	u16 radio_cfg;
-	u8 val_link;
+	u16 link;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
+	pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &link);
 
 	/* L1 is enabled by BIOS */
-	if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
+	if ((link & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
 		/* diable L0S disabled L1A enabled */
 		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
 	else
@@ -444,48 +444,6 @@ static int iwl5000_send_Xtal_calib(struct iwl_priv *priv)
 				sizeof(cal_cmd), &cal_cmd);
 }
 
-static int iwl5000_send_calib_results(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	struct iwl_host_cmd hcmd = {
-		.id = REPLY_PHY_CALIBRATION_CMD,
-		.meta.flags = CMD_SIZE_HUGE,
-	};
-
-	if (priv->calib_results.lo_res) {
-		hcmd.len = priv->calib_results.lo_res_len;
-		hcmd.data = priv->calib_results.lo_res;
-		ret = iwl_send_cmd_sync(priv, &hcmd);
-
-		if (ret)
-			goto err;
-	}
-
-	if (priv->calib_results.tx_iq_res) {
-		hcmd.len = priv->calib_results.tx_iq_res_len;
-		hcmd.data = priv->calib_results.tx_iq_res;
-		ret = iwl_send_cmd_sync(priv, &hcmd);
-
-		if (ret)
-			goto err;
-	}
-
-	if (priv->calib_results.tx_iq_perd_res) {
-		hcmd.len = priv->calib_results.tx_iq_perd_res_len;
-		hcmd.data = priv->calib_results.tx_iq_perd_res;
-		ret = iwl_send_cmd_sync(priv, &hcmd);
-
-		if (ret)
-			goto err;
-	}
-
-	return 0;
-err:
-	IWL_ERROR("Error %d\n", ret);
-	return ret;
-}
-
 static int iwl5000_send_calib_cfg(struct iwl_priv *priv)
 {
 	struct iwl5000_calib_cfg_cmd calib_cfg_cmd;
@@ -510,33 +468,30 @@ static void iwl5000_rx_calib_result(struct iwl_priv *priv,
 	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
 	struct iwl5000_calib_hdr *hdr = (struct iwl5000_calib_hdr *)pkt->u.raw;
 	int len = le32_to_cpu(pkt->len) & FH_RSCSR_FRAME_SIZE_MSK;
-
-	iwl_free_calib_results(priv);
+	int index;
 
 	/* reduce the size of the length field itself */
 	len -= 4;
 
+	/* Define the order in which the results will be sent to the runtime
+	 * uCode. iwl_send_calib_results sends them in a row according to their
+	 * index. We sort them here */
 	switch (hdr->op_code) {
 	case IWL5000_PHY_CALIBRATE_LO_CMD:
-		priv->calib_results.lo_res = kzalloc(len, GFP_ATOMIC);
-		priv->calib_results.lo_res_len = len;
-		memcpy(priv->calib_results.lo_res, pkt->u.raw, len);
+		index = IWL5000_CALIB_LO;
 		break;
 	case IWL5000_PHY_CALIBRATE_TX_IQ_CMD:
-		priv->calib_results.tx_iq_res = kzalloc(len, GFP_ATOMIC);
-		priv->calib_results.tx_iq_res_len = len;
-		memcpy(priv->calib_results.tx_iq_res, pkt->u.raw, len);
+		index = IWL5000_CALIB_TX_IQ;
 		break;
 	case IWL5000_PHY_CALIBRATE_TX_IQ_PERD_CMD:
-		priv->calib_results.tx_iq_perd_res = kzalloc(len, GFP_ATOMIC);
-		priv->calib_results.tx_iq_perd_res_len = len;
-		memcpy(priv->calib_results.tx_iq_perd_res, pkt->u.raw, len);
+		index = IWL5000_CALIB_TX_IQ_PERD;
 		break;
 	default:
 		IWL_ERROR("Unknown calibration notification %d\n",
 			  hdr->op_code);
 		return;
 	}
+	iwl_calib_set(&priv->calib_results[index], pkt->u.raw, len);
 }
 
 static void iwl5000_rx_calib_complete(struct iwl_priv *priv,
@@ -834,7 +789,7 @@ static int iwl5000_alive_notify(struct iwl_priv *priv)
 	iwl5000_send_Xtal_calib(priv);
 
 	if (priv->ucode_type == UCODE_RT)
-		iwl5000_send_calib_results(priv);
+		iwl_send_calib_results(priv);
 
 	return 0;
 }

drivers/net/wireless/iwlwifi/iwl-agn-rs.c

@@ -1668,6 +1668,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv,
 		return;
 
 	lq_sta = (struct iwl_lq_sta *)sta->rate_ctrl_priv;
+	lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
 
 	tid = rs_tl_add_packet(lq_sta, hdr);
 
@@ -2216,8 +2217,7 @@ static void rs_rate_init(void *priv_rate, void *priv_sta,
 			sta->txrate_idx = i;
 
 	sta->last_txrate_idx = sta->txrate_idx;
-	/* WTF is with this bogus comment? A doesn't have cck rates */
-	/* For MODE_IEEE80211A, cck rates are at end of rate table */
+	/* For MODE_IEEE80211A, skip over cck rates in global rate table */
 	if (local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
 		sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
 

drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -1273,7 +1273,7 @@ int iwl4965_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 
 	if (src == IWL_PWR_SRC_VAUX) {
 		u32 val;
-		ret = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE,
+		ret = pci_read_config_dword(priv->pci_dev, PCI_CFG_POWER_SOURCE,
 					    &val);
 
 		if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT)
@@ -2486,6 +2486,7 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
 	if (!priv->vif || !priv->is_open)
 		return;
 
+	iwl_power_cancel_timeout(priv);
 	iwl_scan_cancel_timeout(priv, 200);
 
 	conf = ieee80211_get_hw_conf(priv->hw);
@@ -2550,10 +2551,6 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
 		break;
 	}
 
-	/* Enable Rx differential gain and sensitivity calibrations */
-	iwl_chain_noise_reset(priv);
-	priv->start_calib = 1;
-
 	if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS)
 		priv->assoc_station_added = 1;
 
@@ -2561,7 +2558,12 @@ static void iwl4965_post_associate(struct iwl_priv *priv)
 	iwl_activate_qos(priv, 0);
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	iwl_power_update_mode(priv, 0);
+	iwl_power_enable_management(priv);
+
+	/* Enable Rx differential gain and sensitivity calibrations */
+	iwl_chain_noise_reset(priv);
+	priv->start_calib = 1;
+
 	/* we have just associated, don't start scan too early */
 	priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
 }
@@ -2720,12 +2722,6 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 
 	IWL_DEBUG_MACDUMP("enter\n");
 
-	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) {
-		IWL_DEBUG_MAC80211("leave - monitor\n");
-		dev_kfree_skb_any(skb);
-		return 0;
-	}
-
 	IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
 		     ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
 
@@ -2841,7 +2837,7 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co
 	)
 		priv->staging_rxon.flags = 0;
 
-	iwl_set_rxon_channel(priv, conf->channel->band, channel);
+	iwl_set_rxon_channel(priv, conf->channel);
 
 	iwl_set_flags_for_band(priv, conf->channel->band);
 
@@ -3179,9 +3175,9 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw,
 
 }
 
-static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
+static int iwl_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t ssid_len)
 {
-	int rc = 0;
+	int ret;
 	unsigned long flags;
 	struct iwl_priv *priv = hw->priv;
 
@@ -3191,41 +3187,40 @@ static int iwl4965_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
 	spin_lock_irqsave(&priv->lock, flags);
 
 	if (!iwl_is_ready_rf(priv)) {
-		rc = -EIO;
+		ret = -EIO;
 		IWL_DEBUG_MAC80211("leave - not ready or exit pending\n");
 		goto out_unlock;
 	}
 
 	if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {	/* APs don't scan */
-		rc = -EIO;
+		ret = -EIO;
 		IWL_ERROR("ERROR: APs don't scan\n");
 		goto out_unlock;
 	}
 
 	/* we don't schedule scan within next_scan_jiffies period */
 	if (priv->next_scan_jiffies &&
-			time_after(priv->next_scan_jiffies, jiffies)) {
-		rc = -EAGAIN;
+	    time_after(priv->next_scan_jiffies, jiffies)) {
+		IWL_DEBUG_SCAN("scan rejected: within next scan period\n");
+		ret = -EAGAIN;
 		goto out_unlock;
 	}
 	/* if we just finished scan ask for delay */
-	if (priv->last_scan_jiffies && time_after(priv->last_scan_jiffies +
-				IWL_DELAY_NEXT_SCAN, jiffies)) {
-		rc = -EAGAIN;
+	if (iwl_is_associated(priv) && priv->last_scan_jiffies &&
+	    time_after(priv->last_scan_jiffies + IWL_DELAY_NEXT_SCAN, jiffies)) {
+		IWL_DEBUG_SCAN("scan rejected: within previous scan period\n");
+		ret = -EAGAIN;
 		goto out_unlock;
 	}
-	if (len) {
-		IWL_DEBUG_SCAN("direct scan for %s [%d]\n ",
-			       iwl_escape_essid(ssid, len), (int)len);
-
+	if (ssid_len) {
 		priv->one_direct_scan = 1;
-		priv->direct_ssid_len = (u8)
-		    min((u8) len, (u8) IW_ESSID_MAX_SIZE);
+		priv->direct_ssid_len =  min_t(u8, ssid_len, IW_ESSID_MAX_SIZE);
 		memcpy(priv->direct_ssid, ssid, priv->direct_ssid_len);
-	} else
+	} else {
 		priv->one_direct_scan = 0;
+	}
 
-	rc = iwl_scan_initiate(priv);
+	ret = iwl_scan_initiate(priv);
 
 	IWL_DEBUG_MAC80211("leave\n");
 
@@ -3233,7 +3228,7 @@ out_unlock:
 	spin_unlock_irqrestore(&priv->lock, flags);
 	mutex_unlock(&priv->mutex);
 
-	return rc;
+	return ret;
 }
 
 static void iwl4965_mac_update_tkip_key(struct ieee80211_hw *hw,
@@ -3536,6 +3531,16 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
 	/* Per mac80211.h: This is only used in IBSS mode... */
 	if (priv->iw_mode != IEEE80211_IF_TYPE_IBSS) {
 
+		/* switch to CAM during association period.
+		 * the ucode will block any association/authentication
+		 * frome during assiciation period if it can not hear
+		 * the AP because of PM. the timer enable PM back is
+		 * association do not complete
+		 */
+		if (priv->hw->conf.channel->flags & (IEEE80211_CHAN_PASSIVE_SCAN |
+						     IEEE80211_CHAN_RADAR))
+				iwl_power_disable_management(priv, 3000);
+
 		IWL_DEBUG_MAC80211("leave - not in IBSS\n");
 		mutex_unlock(&priv->mutex);
 		return;
@@ -3620,11 +3625,11 @@ static ssize_t store_debug_level(struct device *d,
 				 const char *buf, size_t count)
 {
 	struct iwl_priv *priv = d->driver_data;
-	char *p = (char *)buf;
-	u32 val;
+	unsigned long val;
+	int ret;
 
-	val = simple_strtoul(p, &p, 0);
-	if (p == buf)
+	ret = strict_strtoul(buf, 0, &val);
+	if (ret)
 		printk(KERN_INFO DRV_NAME
 		       ": %s is not in hex or decimal form.\n", buf);
 	else
@@ -3696,11 +3701,11 @@ static ssize_t store_tx_power(struct device *d,
 			      const char *buf, size_t count)
 {
 	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	char *p = (char *)buf;
-	u32 val;
+	unsigned long val;
+	int ret;
 
-	val = simple_strtoul(p, &p, 10);
-	if (p == buf)
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
 		printk(KERN_INFO DRV_NAME
 		       ": %s is not in decimal form.\n", buf);
 	else
@@ -3724,7 +3729,12 @@ static ssize_t store_flags(struct device *d,
 			   const char *buf, size_t count)
 {
 	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	u32 flags = simple_strtoul(buf, NULL, 0);
+	unsigned long val;
+	u32 flags;
+	int ret = strict_strtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+	flags = (u32)val;
 
 	mutex_lock(&priv->mutex);
 	if (le32_to_cpu(priv->staging_rxon.flags) != flags) {
@@ -3732,8 +3742,7 @@ static ssize_t store_flags(struct device *d,
 		if (iwl_scan_cancel_timeout(priv, 100))
 			IWL_WARNING("Could not cancel scan.\n");
 		else {
-			IWL_DEBUG_INFO("Committing rxon.flags = 0x%04X\n",
-				       flags);
+			IWL_DEBUG_INFO("Commit rxon.flags = 0x%04X\n", flags);
 			priv->staging_rxon.flags = cpu_to_le32(flags);
 			iwl4965_commit_rxon(priv);
 		}
@@ -3759,7 +3768,12 @@ static ssize_t store_filter_flags(struct device *d,
 				  const char *buf, size_t count)
 {
 	struct iwl_priv *priv = (struct iwl_priv *)d->driver_data;
-	u32 filter_flags = simple_strtoul(buf, NULL, 0);
+	unsigned long val;
+	u32 filter_flags;
+	int ret = strict_strtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+	filter_flags = (u32)val;
 
 	mutex_lock(&priv->mutex);
 	if (le32_to_cpu(priv->staging_rxon.filter_flags) != filter_flags) {
@@ -3860,10 +3874,12 @@ static ssize_t store_retry_rate(struct device *d,
 				const char *buf, size_t count)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
+	long val;
+	int ret  = strict_strtol(buf, 10, &val);
+	if (!ret)
+		return ret;
 
-	priv->retry_rate = simple_strtoul(buf, NULL, 0);
-	if (priv->retry_rate <= 0)
-		priv->retry_rate = 1;
+	priv->retry_rate = (val > 0) ? val : 1;
 
 	return count;
 }
@@ -3884,9 +3900,9 @@ static ssize_t store_power_level(struct device *d,
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
 	int ret;
-	int mode;
+	unsigned long mode;
+
 
-	mode = simple_strtoul(buf, NULL, 0);
 	mutex_lock(&priv->mutex);
 
 	if (!iwl_is_ready(priv)) {
@@ -3894,6 +3910,10 @@ static ssize_t store_power_level(struct device *d,
 		goto out;
 	}
 
+	ret = strict_strtoul(buf, 10, &mode);
+	if (ret)
+		goto out;
+
 	ret = iwl_power_set_user_mode(priv, mode);
 	if (ret) {
 		IWL_DEBUG_MAC80211("failed setting power mode.\n");
@@ -4073,6 +4093,7 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	/* FIXME : remove when resolved PENDING */
 	INIT_WORK(&priv->scan_completed, iwl_bg_scan_completed);
 	iwl_setup_scan_deferred_work(priv);
+	iwl_setup_power_deferred_work(priv);
 
 	if (priv->cfg->ops->lib->setup_deferred_work)
 		priv->cfg->ops->lib->setup_deferred_work(priv);
@@ -4092,6 +4113,7 @@ static void iwl_cancel_deferred_work(struct iwl_priv *priv)
 
 	cancel_delayed_work_sync(&priv->init_alive_start);
 	cancel_delayed_work(&priv->scan_check);
+	cancel_delayed_work_sync(&priv->set_power_save);
 	cancel_delayed_work(&priv->alive_start);
 	cancel_work_sync(&priv->beacon_update);
 	del_timer_sync(&priv->statistics_periodic);
@@ -4140,7 +4162,7 @@ static struct ieee80211_ops iwl4965_hw_ops = {
 	.reset_tsf = iwl4965_mac_reset_tsf,
 	.bss_info_changed = iwl4965_bss_info_changed,
 	.ampdu_action = iwl4965_mac_ampdu_action,
-	.hw_scan = iwl4965_mac_hw_scan
+	.hw_scan = iwl_mac_hw_scan
 };
 
 static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
@@ -4215,9 +4237,6 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 
 	pci_set_drvdata(pdev, priv);
 
-	/* We disable the RETRY_TIMEOUT register (0x41) to keep
-	 * PCI Tx retries from interfering with C3 CPU state */
-	pci_write_config_byte(pdev, 0x41, 0x00);
 
 	/***********************
 	 * 3. Read REV register
@@ -4237,6 +4256,10 @@ static int iwl4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 		": Detected Intel Wireless WiFi Link %s REV=0x%X\n",
 		priv->cfg->name, priv->hw_rev);
 
+	/* We disable the RETRY_TIMEOUT register (0x41) to keep
+	 * PCI Tx retries from interfering with C3 CPU state */
+	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
+
 	/* amp init */
 	err = priv->cfg->ops->lib->apm_ops.init(priv);
 	if (err < 0) {

drivers/net/wireless/iwlwifi/iwl-calib.c

@@ -66,6 +66,66 @@
 #include "iwl-core.h"
 #include "iwl-calib.h"
 
+/*****************************************************************************
+ * INIT calibrations framework
+ *****************************************************************************/
+
+ int iwl_send_calib_results(struct iwl_priv *priv)
+{
+	int ret = 0;
+	int i = 0;
+
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_PHY_CALIBRATION_CMD,
+		.meta.flags = CMD_SIZE_HUGE,
+	};
+
+	for (i = 0; i < IWL_CALIB_MAX; i++)
+		if (priv->calib_results[i].buf) {
+			hcmd.len = priv->calib_results[i].buf_len;
+			hcmd.data = priv->calib_results[i].buf;
+			ret = iwl_send_cmd_sync(priv, &hcmd);
+			if (ret)
+				goto err;
+		}
+
+	return 0;
+err:
+	IWL_ERROR("Error %d iteration %d\n", ret, i);
+	return ret;
+}
+EXPORT_SYMBOL(iwl_send_calib_results);
+
+int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len)
+{
+	if (res->buf_len != len) {
+		kfree(res->buf);
+		res->buf = kzalloc(len, GFP_ATOMIC);
+	}
+	if (unlikely(res->buf == NULL))
+		return -ENOMEM;
+
+	res->buf_len = len;
+	memcpy(res->buf, buf, len);
+	return 0;
+}
+EXPORT_SYMBOL(iwl_calib_set);
+
+void iwl_calib_free_results(struct iwl_priv *priv)
+{
+	int i;
+
+	for (i = 0; i < IWL_CALIB_MAX; i++) {
+		kfree(priv->calib_results[i].buf);
+		priv->calib_results[i].buf = NULL;
+		priv->calib_results[i].buf_len = 0;
+	}
+}
+
+/*****************************************************************************
+ * RUNTIME calibrations framework
+ *****************************************************************************/
+
 /* "false alarms" are signals that our DSP tries to lock onto,
  *   but then determines that they are either noise, or transmissions
  *   from a distant wireless network (also "noise", really) that get

drivers/net/wireless/iwlwifi/iwl-commands.h

@@ -163,6 +163,13 @@ enum {
 /* iwl_cmd_header flags value */
 #define IWL_CMD_FAILED_MSK 0x40
 
+#define SEQ_TO_QUEUE(s)	(((s) >> 8) & 0x1f)
+#define QUEUE_TO_SEQ(q)	(((q) & 0x1f) << 8)
+#define SEQ_TO_INDEX(s)	((s) & 0xff)
+#define INDEX_TO_SEQ(i)	((i) & 0xff)
+#define SEQ_HUGE_FRAME	__constant_cpu_to_le16(0x4000)
+#define SEQ_RX_FRAME	__constant_cpu_to_le16(0x8000)
+
 /**
  * struct iwl_cmd_header
  *
@@ -171,7 +178,7 @@ enum {
  */
 struct iwl_cmd_header {
 	u8 cmd;		/* Command ID:  REPLY_RXON, etc. */
-	u8 flags;	/* IWL_CMD_* */
+	u8 flags;	/* 0:5 reserved, 6 abort, 7 internal */
 	/*
 	 * The driver sets up the sequence number to values of its chosing.
 	 * uCode does not use this value, but passes it back to the driver
@@ -187,11 +194,12 @@ struct iwl_cmd_header {
 	 *
 	 * The Linux driver uses the following format:
 	 *
-	 *  0:7    index/position within Tx queue
-	 *  8:13   Tx queue selection
-	 * 14:14   driver sets this to indicate command is in the 'huge'
-	 *         storage at the end of the command buffers, i.e. scan cmd
-	 * 15:15   uCode sets this in uCode-originated response/notification
+	 *  0:7		tfd index - position within TX queue
+	 *  8:12	TX queue id
+	 *  13		reserved
+	 *  14		huge - driver sets this to indicate command is in the
+	 *  		'huge' storage at the end of the command buffers
+	 *  15		unsolicited RX or uCode-originated notification
 	 */
 	__le16 sequence;
 
@@ -2026,8 +2034,8 @@ struct iwl4965_spectrum_notification {
  *   bit 2 - '0' PM have to walk up every DTIM
  *           '1' PM could sleep over DTIM till listen Interval.
  * PCI power managed
- *   bit 3 - '0' (PCI_LINK_CTRL & 0x1)
- *           '1' !(PCI_LINK_CTRL & 0x1)
+ *   bit 3 - '0' (PCI_CFG_LINK_CTRL & 0x1)
+ *           '1' !(PCI_CFG_LINK_CTRL & 0x1)
  * Force sleep Modes
  *   bit 31/30- '00' use both mac/xtal sleeps
  *              '01' force Mac sleep

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -773,7 +773,7 @@ void iwl_set_rxon_chain(struct iwl_priv *priv)
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
 /**
- * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON
+ * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON
  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
  * @channel: Any channel valid for the requested phymode
 
@@ -782,10 +782,11 @@ EXPORT_SYMBOL(iwl_set_rxon_chain);
  * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
  * in the staging RXON flag structure based on the phymode
  */
-int iwl_set_rxon_channel(struct iwl_priv *priv,
-				enum ieee80211_band band,
-				u16 channel)
+int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch)
 {
+	enum ieee80211_band band = ch->band;
+	u16 channel = ieee80211_frequency_to_channel(ch->center_freq);
+
 	if (!iwl_get_channel_info(priv, band, channel)) {
 		IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
 			       channel, band);
@@ -819,6 +820,10 @@ int iwl_setup_mac(struct iwl_priv *priv)
 	/* Tell mac80211 our characteristics */
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
 	/* Default value; 4 EDCA QOS priorities */
 	hw->queues = 4;
 	/* queues to support 11n aggregation */
@@ -906,8 +911,6 @@ int iwl_init_drv(struct iwl_priv *priv)
 	priv->qos_data.qos_active = 0;
 	priv->qos_data.qos_cap.val = 0;
 
-	iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
-
 	priv->rates_mask = IWL_RATES_MASK;
 	/* If power management is turned on, default to AC mode */
 	priv->power_mode = IWL_POWER_AC;
@@ -934,22 +937,6 @@ err:
 }
 EXPORT_SYMBOL(iwl_init_drv);
 
-void iwl_free_calib_results(struct iwl_priv *priv)
-{
-	kfree(priv->calib_results.lo_res);
-	priv->calib_results.lo_res = NULL;
-	priv->calib_results.lo_res_len = 0;
-
-	kfree(priv->calib_results.tx_iq_res);
-	priv->calib_results.tx_iq_res = NULL;
-	priv->calib_results.tx_iq_res_len = 0;
-
-	kfree(priv->calib_results.tx_iq_perd_res);
-	priv->calib_results.tx_iq_perd_res = NULL;
-	priv->calib_results.tx_iq_perd_res_len = 0;
-}
-EXPORT_SYMBOL(iwl_free_calib_results);
-
 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 {
 	int ret = 0;
@@ -977,10 +964,9 @@ int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 }
 EXPORT_SYMBOL(iwl_set_tx_power);
 
-
 void iwl_uninit_drv(struct iwl_priv *priv)
 {
-	iwl_free_calib_results(priv);
+	iwl_calib_free_results(priv);
 	iwlcore_free_geos(priv);
 	iwl_free_channel_map(priv);
 	kfree(priv->scan);

drivers/net/wireless/iwlwifi/iwl-core.h

@@ -186,12 +186,9 @@ struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
 void iwl_hw_detect(struct iwl_priv *priv);
 
 void iwl_clear_stations_table(struct iwl_priv *priv);
-void iwl_free_calib_results(struct iwl_priv *priv);
 void iwl_reset_qos(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
-int iwl_set_rxon_channel(struct iwl_priv *priv,
-				enum ieee80211_band band,
-				u16 channel);
+int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info);
 u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_ht_info *sta_ht_inf);
@@ -291,6 +288,13 @@ int iwl_scan_initiate(struct iwl_priv *priv);
 void iwl_setup_rx_scan_handlers(struct iwl_priv *priv);
 void iwl_setup_scan_deferred_work(struct iwl_priv *priv);
 
+/*******************************************************************************
+ * Calibrations - implemented in iwl-calib.c
+ ******************************************************************************/
+int iwl_send_calib_results(struct iwl_priv *priv);
+int iwl_calib_set(struct iwl_calib_result *res, const u8 *buf, int len);
+void iwl_calib_free_results(struct iwl_priv *priv);
+
 /*****************************************************
  *   S e n d i n g     H o s t     C o m m a n d s   *
  *****************************************************/

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -225,12 +225,6 @@ struct iwl_frame {
 	struct list_head list;
 };
 
-#define SEQ_TO_QUEUE(x)  ((x >> 8) & 0xbf)
-#define QUEUE_TO_SEQ(x)  ((x & 0xbf) << 8)
-#define SEQ_TO_INDEX(x) ((u8)(x & 0xff))
-#define INDEX_TO_SEQ(x) ((u8)(x & 0xff))
-#define SEQ_HUGE_FRAME  (0x4000)
-#define SEQ_RX_FRAME    __constant_cpu_to_le16(0x8000)
 #define SEQ_TO_SN(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
@@ -637,12 +631,6 @@ static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
 
 struct iwl_priv;
 
-/*
- * Forward declare iwl-4965.c functions for iwl-base.c
- */
-extern void iwl4965_rf_kill_ct_config(struct iwl_priv *priv);
-int iwl4965_check_empty_hw_queue(struct iwl_priv *priv, int sta_id,
-					u8 tid, int txq_id);
 
 /* Structures, enum, and defines specific to the 4965 */
 
@@ -734,13 +722,10 @@ struct statistics_general_data {
 	u32 beacon_energy_c;
 };
 
-struct iwl_calib_results {
-	void *tx_iq_res;
-	void *tx_iq_perd_res;
-	void *lo_res;
-	u32 tx_iq_res_len;
-	u32 tx_iq_perd_res_len;
-	u32 lo_res_len;
+/* Opaque calibration results */
+struct iwl_calib_result {
+	void *buf;
+	size_t buf_len;
 };
 
 enum ucode_type {
@@ -802,6 +787,7 @@ enum {
 
 
 #define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
+#define IWL_CALIB_MAX  3
 
 struct iwl_priv {
 
@@ -845,7 +831,7 @@ struct iwl_priv {
 	s32 last_temperature;
 
 	/* init calibration results */
-	struct iwl_calib_results calib_results;
+	struct iwl_calib_result calib_results[IWL_CALIB_MAX];
 
 	/* Scan related variables */
 	unsigned long last_scan_jiffies;
@@ -1032,6 +1018,7 @@ struct iwl_priv {
 
 	struct tasklet_struct irq_tasklet;
 
+	struct delayed_work set_power_save;
 	struct delayed_work init_alive_start;
 	struct delayed_work alive_start;
 	struct delayed_work scan_check;

drivers/net/wireless/iwlwifi/iwl-io.h

@@ -61,7 +61,7 @@
  *
  */
 
-#define _iwl_write32(priv, ofs, val) writel((val), (priv)->hw_base + (ofs))
+#define _iwl_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs))
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv,
 				 u32 ofs, u32 val)
@@ -75,7 +75,7 @@ static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv,
 #define iwl_write32(priv, ofs, val) _iwl_write32(priv, ofs, val)
 #endif
 
-#define _iwl_read32(priv, ofs) readl((priv)->hw_base + (ofs))
+#define _iwl_read32(priv, ofs) ioread32((priv)->hw_base + (ofs))
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs)
 {
@@ -155,28 +155,10 @@ static inline void __iwl_clear_bit(const char *f, u32 l,
 static inline int _iwl_grab_nic_access(struct iwl_priv *priv)
 {
 	int ret;
-	u32 gp_ctl;
-
 #ifdef CONFIG_IWLWIFI_DEBUG
 	if (atomic_read(&priv->restrict_refcnt))
 		return 0;
 #endif
-	if (test_bit(STATUS_RF_KILL_HW, &priv->status) ||
-	    test_bit(STATUS_RF_KILL_SW, &priv->status)) {
-		IWL_WARNING("WARNING: Requesting MAC access during RFKILL "
-			"wakes up NIC\n");
-
-		/* 10 msec allows time for NIC to complete its data save */
-		gp_ctl = _iwl_read32(priv, CSR_GP_CNTRL);
-		if (gp_ctl & CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY) {
-			IWL_DEBUG_RF_KILL("Wait for complete power-down, "
-				"gpctl = 0x%08x\n", gp_ctl);
-			mdelay(10);
-		} else
-			IWL_DEBUG_RF_KILL("power-down complete, "
-					  "gpctl = 0x%08x\n", gp_ctl);
-	}
-
 	/* this bit wakes up the NIC */
 	_iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
 	ret = _iwl_poll_bit(priv, CSR_GP_CNTRL,

drivers/net/wireless/iwlwifi/iwl-power.c

@@ -152,9 +152,10 @@ static u16 iwl_get_auto_power_mode(struct iwl_priv *priv)
 /* initialize to default */
 static int iwl_power_init_handle(struct iwl_priv *priv)
 {
-	int ret = 0, i;
 	struct iwl_power_mgr *pow_data;
 	int size = sizeof(struct iwl_power_vec_entry) * IWL_POWER_MAX;
+	struct iwl_powertable_cmd *cmd;
+	int i;
 	u16 pci_pm;
 
 	IWL_DEBUG_POWER("Initialize power \n");
@@ -167,25 +168,19 @@ static int iwl_power_init_handle(struct iwl_priv *priv)
 	memcpy(&pow_data->pwr_range_1[0], &range_1[0], size);
 	memcpy(&pow_data->pwr_range_2[0], &range_2[0], size);
 
-	ret = pci_read_config_word(priv->pci_dev,
-				  PCI_LINK_CTRL, &pci_pm);
-	if (ret != 0)
-		return 0;
-	else {
-		struct iwl_powertable_cmd *cmd;
+	pci_read_config_word(priv->pci_dev, PCI_CFG_LINK_CTRL, &pci_pm);
 
-		IWL_DEBUG_POWER("adjust power command flags\n");
+	IWL_DEBUG_POWER("adjust power command flags\n");
 
-		for (i = 0; i < IWL_POWER_MAX; i++) {
-			cmd = &pow_data->pwr_range_0[i].cmd;
+	for (i = 0; i < IWL_POWER_MAX; i++) {
+		cmd = &pow_data->pwr_range_0[i].cmd;
 
-			if (pci_pm & 0x1)
-				cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
-			else
-				cmd->flags |= IWL_POWER_PCI_PM_MSK;
-		}
+		if (pci_pm & PCI_CFG_LINK_CTRL_VAL_L0S_EN)
+			cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
+		else
+			cmd->flags |= IWL_POWER_PCI_PM_MSK;
 	}
-	return ret;
+	return 0;
 }
 
 /* adjust power command according to dtim period and power level*/
@@ -324,7 +319,7 @@ EXPORT_SYMBOL(iwl_power_update_mode);
  * this will be usefull for rate scale to disable PM during heavy
  * Tx/Rx activities
  */
-int iwl_power_disable_management(struct iwl_priv *priv)
+int iwl_power_disable_management(struct iwl_priv *priv, u32 ms)
 {
 	u16 prev_mode;
 	int ret = 0;
@@ -337,6 +332,11 @@ int iwl_power_disable_management(struct iwl_priv *priv)
 	ret = iwl_power_update_mode(priv, 0);
 	priv->power_data.power_disabled = 1;
 	priv->power_data.user_power_setting = prev_mode;
+	cancel_delayed_work(&priv->set_power_save);
+	if (ms)
+		queue_delayed_work(priv->workqueue, &priv->set_power_save,
+				   msecs_to_jiffies(ms));
+
 
 	return ret;
 }
@@ -431,3 +431,35 @@ int iwl_power_temperature_change(struct iwl_priv *priv)
 	return ret;
 }
 EXPORT_SYMBOL(iwl_power_temperature_change);
+
+static void iwl_bg_set_power_save(struct work_struct *work)
+{
+	struct iwl_priv *priv = container_of(work,
+				struct iwl_priv, set_power_save.work);
+	IWL_DEBUG(IWL_DL_STATE, "update power\n");
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	mutex_lock(&priv->mutex);
+
+	/* on starting association we disable power managment
+	 * until association, if association failed then this
+	 * timer will expire and enable PM again.
+	 */
+	if (!iwl_is_associated(priv))
+		iwl_power_enable_management(priv);
+
+	mutex_unlock(&priv->mutex);
+}
+void iwl_setup_power_deferred_work(struct iwl_priv *priv)
+{
+	INIT_DELAYED_WORK(&priv->set_power_save, iwl_bg_set_power_save);
+}
+EXPORT_SYMBOL(iwl_setup_power_deferred_work);
+
+void iwl_power_cancel_timeout(struct iwl_priv *priv)
+{
+	cancel_delayed_work(&priv->set_power_save);
+}
+EXPORT_SYMBOL(iwl_power_cancel_timeout);

drivers/net/wireless/iwlwifi/iwl-power.h

@@ -78,8 +78,10 @@ struct iwl_power_mgr {
 	u8 power_disabled; /* flag to disable using power saving level */
 };
 
+void iwl_setup_power_deferred_work(struct iwl_priv *priv);
+void iwl_power_cancel_timeout(struct iwl_priv *priv);
 int iwl_power_update_mode(struct iwl_priv *priv, u8 refresh);
-int iwl_power_disable_management(struct iwl_priv *priv);
+int iwl_power_disable_management(struct iwl_priv *priv, u32 ms);
 int iwl_power_enable_management(struct iwl_priv *priv);
 int iwl_power_set_user_mode(struct iwl_priv *priv, u16 mode);
 int iwl_power_set_system_mode(struct iwl_priv *priv, u16 mode);

drivers/net/wireless/iwlwifi/iwl-sta.c

@@ -968,6 +968,11 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		iwl_print_hex_dump(priv, IWL_DL_DROP, (u8 *) hdr, sizeof(*hdr));
 		return priv->hw_params.bcast_sta_id;
 
+	/* If we are in monitor mode, use BCAST. This is required for
+	 * packet injection. */
+	case IEEE80211_IF_TYPE_MNTR:
+		return priv->hw_params.bcast_sta_id;
+
 	default:
 		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_params.bcast_sta_id;

drivers/net/wireless/iwlwifi/iwl-tx.c

@@ -789,11 +789,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		goto drop_unlock;
 	}
 
-	if (!priv->vif) {
-		IWL_DEBUG_DROP("Dropping - !priv->vif\n");
-		goto drop_unlock;
-	}
-
 	if ((ieee80211_get_tx_rate(priv->hw, info)->hw_value & 0xFF) ==
 	     IWL_INVALID_RATE) {
 		IWL_ERROR("ERROR: No TX rate available.\n");
@@ -815,9 +810,11 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 	/* drop all data frame if we are not associated */
 	if (ieee80211_is_data(fc) &&
-	   (!iwl_is_associated(priv) ||
-	    ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) ||
-	    !priv->assoc_station_added)) {
+	    (priv->iw_mode != IEEE80211_IF_TYPE_MNTR ||
+	    !(info->flags & IEEE80211_TX_CTL_INJECTED)) && /* packet injection */
+	    (!iwl_is_associated(priv) ||
+	     ((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !priv->assoc_id) ||
+	     !priv->assoc_station_added)) {
 		IWL_DEBUG_DROP("Dropping - !iwl_is_associated\n");
 		goto drop_unlock;
 	}
@@ -1057,7 +1054,7 @@ int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd)
 	out_cmd->hdr.sequence = cpu_to_le16(QUEUE_TO_SEQ(IWL_CMD_QUEUE_NUM) |
 			INDEX_TO_SEQ(q->write_ptr));
 	if (out_cmd->meta.flags & CMD_SIZE_HUGE)
-		out_cmd->hdr.sequence |= cpu_to_le16(SEQ_HUGE_FRAME);
+		out_cmd->hdr.sequence |= SEQ_HUGE_FRAME;
 	len = (idx == TFD_CMD_SLOTS) ?
 			IWL_MAX_SCAN_SIZE : sizeof(struct iwl_cmd);
 	phys_addr = pci_map_single(priv->pci_dev, out_cmd, len,
@@ -1192,8 +1189,8 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
-	int huge = sequence & SEQ_HUGE_FRAME;
 	int cmd_index;
+	bool huge = !!(pkt->hdr.sequence & SEQ_HUGE_FRAME);
 	struct iwl_cmd *cmd;
 
 	/* If a Tx command is being handled and it isn't in the actual

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -4782,8 +4782,11 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
 /* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
  * sending probe req.  This should be set long enough to hear probe responses
  * from more than one AP.  */
-#define IWL_ACTIVE_DWELL_TIME_24    (20)	/* all times in msec */
-#define IWL_ACTIVE_DWELL_TIME_52    (10)
+#define IWL_ACTIVE_DWELL_TIME_24    (30)	/* all times in msec */
+#define IWL_ACTIVE_DWELL_TIME_52    (20)
+
+#define IWL_ACTIVE_DWELL_FACTOR_24GHZ (3)
+#define IWL_ACTIVE_DWELL_FACTOR_52GHZ (2)
 
 /* For faster active scanning, scan will move to the next channel if fewer than
  * PLCP_QUIET_THRESH packets are heard on this channel within
@@ -4792,7 +4795,7 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
  * no other traffic).
  * Disable "quiet" feature by setting PLCP_QUIET_THRESH to 0. */
 #define IWL_PLCP_QUIET_THRESH       __constant_cpu_to_le16(1)	/* packets */
-#define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(5)	/* msec */
+#define IWL_ACTIVE_QUIET_TIME       __constant_cpu_to_le16(10)	/* msec */
 
 /* For passive scan, listen PASSIVE_DWELL_TIME (msec) on each channel.
  * Must be set longer than active dwell time.
@@ -4802,19 +4805,23 @@ static void iwl3945_free_channel_map(struct iwl3945_priv *priv)
 #define IWL_PASSIVE_DWELL_BASE      (100)
 #define IWL_CHANNEL_TUNE_TIME       5
 
+#define IWL_SCAN_PROBE_MASK(n)	 cpu_to_le32((BIT(n) | (BIT(n) - BIT(1))))
+
 static inline u16 iwl3945_get_active_dwell_time(struct iwl3945_priv *priv,
-						enum ieee80211_band band)
+						enum ieee80211_band band,
+						u8 n_probes)
 {
 	if (band == IEEE80211_BAND_5GHZ)
-		return IWL_ACTIVE_DWELL_TIME_52;
+		return IWL_ACTIVE_DWELL_TIME_52 +
+			IWL_ACTIVE_DWELL_FACTOR_52GHZ * (n_probes + 1);
 	else
-		return IWL_ACTIVE_DWELL_TIME_24;
+		return IWL_ACTIVE_DWELL_TIME_24 +
+			IWL_ACTIVE_DWELL_FACTOR_24GHZ * (n_probes + 1);
 }
 
 static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
 					  enum ieee80211_band band)
 {
-	u16 active = iwl3945_get_active_dwell_time(priv, band);
 	u16 passive = (band == IEEE80211_BAND_2GHZ) ?
 	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_24 :
 	    IWL_PASSIVE_DWELL_BASE + IWL_PASSIVE_DWELL_TIME_52;
@@ -4829,15 +4836,12 @@ static u16 iwl3945_get_passive_dwell_time(struct iwl3945_priv *priv,
 		passive = (passive * 98) / 100 - IWL_CHANNEL_TUNE_TIME * 2;
 	}
 
-	if (passive <= active)
-		passive = active + 1;
-
 	return passive;
 }
 
 static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 					 enum ieee80211_band band,
-				     u8 is_active, u8 direct_mask,
+				     u8 is_active, u8 n_probes,
 				     struct iwl3945_scan_channel *scan_ch)
 {
 	const struct ieee80211_channel *channels = NULL;
@@ -4853,9 +4857,12 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 
 	channels = sband->channels;
 
-	active_dwell = iwl3945_get_active_dwell_time(priv, band);
+	active_dwell = iwl3945_get_active_dwell_time(priv, band, n_probes);
 	passive_dwell = iwl3945_get_passive_dwell_time(priv, band);
 
+	if (passive_dwell <= active_dwell)
+		passive_dwell = active_dwell + 1;
+
 	for (i = 0, added = 0; i < sband->n_channels; i++) {
 		if (channels[i].flags & IEEE80211_CHAN_DISABLED)
 			continue;
@@ -4875,8 +4882,8 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv,
 		else
 			scan_ch->type = 1;	/* active */
 
-		if (scan_ch->type & 1)
-			scan_ch->type |= (direct_mask << 1);
+		if ((scan_ch->type & 1) && n_probes)
+			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
 
 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
 		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
@@ -6093,7 +6100,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	int rc = 0;
 	struct iwl3945_scan_cmd *scan;
 	struct ieee80211_conf *conf = NULL;
-	u8 direct_mask;
+	u8 n_probes = 2;
 	enum ieee80211_band band;
 
 	conf = ieee80211_get_hw_conf(priv->hw);
@@ -6201,7 +6208,7 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 		scan->direct_scan[0].len = priv->direct_ssid_len;
 		memcpy(scan->direct_scan[0].ssid,
 		       priv->direct_ssid, priv->direct_ssid_len);
-		direct_mask = 1;
+		n_probes++;
 	} else if (!iwl3945_is_associated(priv) && priv->essid_len) {
 		IWL_DEBUG_SCAN
 		  ("Kicking off one direct scan for '%s' when not associated\n",
@@ -6209,11 +6216,9 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 		scan->direct_scan[0].id = WLAN_EID_SSID;
 		scan->direct_scan[0].len = priv->essid_len;
 		memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len);
-		direct_mask = 1;
-	} else {
+		n_probes++;
+	} else
 		IWL_DEBUG_SCAN("Kicking off one indirect scan.\n");
-		direct_mask = 0;
-	}
 
 	/* We don't build a direct scan probe request; the uCode will do
 	 * that based on the direct_mask added to each channel entry */
@@ -6246,18 +6251,10 @@ static void iwl3945_bg_request_scan(struct work_struct *data)
 	if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR)
 		scan->filter_flags = RXON_FILTER_PROMISC_MSK;
 
-	if (direct_mask)
-		scan->channel_count =
-			iwl3945_get_channels_for_scan(
-				priv, band, 1, /* active */
-				direct_mask,
-				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
-	else
-		scan->channel_count =
-			iwl3945_get_channels_for_scan(
-				priv, band, 0, /* passive */
-				direct_mask,
-				(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
+	scan->channel_count =
+		iwl3945_get_channels_for_scan(priv, band, 1, /* active */
+					      n_probes,
+			(void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]);
 
 	cmd.len += le16_to_cpu(scan->tx_cmd.len) +
 	    scan->channel_count * sizeof(struct iwl3945_scan_channel);
@@ -6320,11 +6317,8 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data)
 
 #define IWL_DELAY_NEXT_SCAN (HZ*2)
 
-static void iwl3945_bg_post_associate(struct work_struct *data)
+static void iwl3945_post_associate(struct iwl3945_priv *priv)
 {
-	struct iwl3945_priv *priv = container_of(data, struct iwl3945_priv,
-					     post_associate.work);
-
 	int rc = 0;
 	struct ieee80211_conf *conf = NULL;
 	DECLARE_MAC_BUF(mac);
@@ -6342,12 +6336,9 @@ static void iwl3945_bg_post_associate(struct work_struct *data)
 	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
 		return;
 
-	mutex_lock(&priv->mutex);
-
-	if (!priv->vif || !priv->is_open) {
-		mutex_unlock(&priv->mutex);
+	if (!priv->vif || !priv->is_open)
 		return;
-	}
+
 	iwl3945_scan_cancel_timeout(priv, 200);
 
 	conf = ieee80211_get_hw_conf(priv->hw);
@@ -6419,7 +6410,6 @@ static void iwl3945_bg_post_associate(struct work_struct *data)
 
 	/* we have just associated, don't start scan too early */
 	priv->next_scan_jiffies = jiffies + IWL_DELAY_NEXT_SCAN;
-	mutex_unlock(&priv->mutex);
 }
 
 static void iwl3945_bg_abort_scan(struct work_struct *work)
@@ -6567,7 +6557,6 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw)
 		 */
 		mutex_lock(&priv->mutex);
 		iwl3945_scan_cancel_timeout(priv, 100);
-		cancel_delayed_work(&priv->post_associate);
 		mutex_unlock(&priv->mutex);
 	}
 
@@ -6933,7 +6922,6 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
 
 	if (iwl3945_is_ready_rf(priv)) {
 		iwl3945_scan_cancel_timeout(priv, 100);
-		cancel_delayed_work(&priv->post_associate);
 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
 		iwl3945_commit_rxon(priv);
 	}
@@ -6948,6 +6936,63 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
 	IWL_DEBUG_MAC80211("leave\n");
 }
 
+#define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+
+static void iwl3945_bss_info_changed(struct ieee80211_hw *hw,
+				     struct ieee80211_vif *vif,
+				     struct ieee80211_bss_conf *bss_conf,
+				     u32 changes)
+{
+	struct iwl3945_priv *priv = hw->priv;
+
+	IWL_DEBUG_MAC80211("changes = 0x%X\n", changes);
+
+	if (changes & BSS_CHANGED_ERP_PREAMBLE) {
+		IWL_DEBUG_MAC80211("ERP_PREAMBLE %d\n",
+				   bss_conf->use_short_preamble);
+		if (bss_conf->use_short_preamble)
+			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ERP_CTS_PROT) {
+		IWL_DEBUG_MAC80211("ERP_CTS %d\n", bss_conf->use_cts_prot);
+		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ))
+			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK;
+		else
+			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK;
+	}
+
+	if (changes & BSS_CHANGED_ASSOC) {
+		IWL_DEBUG_MAC80211("ASSOC %d\n", bss_conf->assoc);
+		/* This should never happen as this function should
+		 * never be called from interrupt context. */
+		if (WARN_ON_ONCE(in_interrupt()))
+			return;
+		if (bss_conf->assoc) {
+			priv->assoc_id = bss_conf->aid;
+			priv->beacon_int = bss_conf->beacon_int;
+			priv->timestamp0 = bss_conf->timestamp & 0xFFFFFFFF;
+			priv->timestamp1 = (bss_conf->timestamp >> 32) &
+					     0xFFFFFFFF;
+			priv->assoc_capability = bss_conf->assoc_capability;
+			priv->next_scan_jiffies = jiffies +
+					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
+			mutex_lock(&priv->mutex);
+			iwl3945_post_associate(priv);
+			mutex_unlock(&priv->mutex);
+		} else {
+			priv->assoc_id = 0;
+			IWL_DEBUG_MAC80211("DISASSOC %d\n", bss_conf->assoc);
+		}
+	} else if (changes && iwl3945_is_associated(priv) && priv->assoc_id) {
+			IWL_DEBUG_MAC80211("Associated Changes %d\n", changes);
+			iwl3945_send_rxon_assoc(priv);
+	}
+
+}
+
 static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
 {
 	int rc = 0;
@@ -7180,8 +7225,6 @@ static void iwl3945_mac_reset_tsf(struct ieee80211_hw *hw)
 
 	iwl3945_reset_qos(priv);
 
-	cancel_delayed_work(&priv->post_associate);
-
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->assoc_id = 0;
 	priv->assoc_capability = 0;
@@ -7266,7 +7309,7 @@ static int iwl3945_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk
 
 	iwl3945_reset_qos(priv);
 
-	queue_work(priv->workqueue, &priv->post_associate.work);
+	iwl3945_post_associate(priv);
 
 	mutex_unlock(&priv->mutex);
 
@@ -7765,7 +7808,6 @@ static void iwl3945_setup_deferred_work(struct iwl3945_priv *priv)
 	INIT_WORK(&priv->rf_kill, iwl3945_bg_rf_kill);
 	INIT_WORK(&priv->beacon_update, iwl3945_bg_beacon_update);
 	INIT_WORK(&priv->set_monitor, iwl3945_bg_set_monitor);
-	INIT_DELAYED_WORK(&priv->post_associate, iwl3945_bg_post_associate);
 	INIT_DELAYED_WORK(&priv->init_alive_start, iwl3945_bg_init_alive_start);
 	INIT_DELAYED_WORK(&priv->alive_start, iwl3945_bg_alive_start);
 	INIT_DELAYED_WORK(&priv->scan_check, iwl3945_bg_scan_check);
@@ -7783,7 +7825,6 @@ static void iwl3945_cancel_deferred_work(struct iwl3945_priv *priv)
 	cancel_delayed_work_sync(&priv->init_alive_start);
 	cancel_delayed_work(&priv->scan_check);
 	cancel_delayed_work(&priv->alive_start);
-	cancel_delayed_work(&priv->post_associate);
 	cancel_work_sync(&priv->beacon_update);
 }
 
@@ -7828,6 +7869,7 @@ static struct ieee80211_ops iwl3945_hw_ops = {
 	.conf_tx = iwl3945_mac_conf_tx,
 	.get_tsf = iwl3945_mac_get_tsf,
 	.reset_tsf = iwl3945_mac_reset_tsf,
+	.bss_info_changed = iwl3945_bss_info_changed,
 	.hw_scan = iwl3945_mac_hw_scan
 };
 
@@ -7888,6 +7930,11 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	hw->flags = IEEE80211_HW_SIGNAL_DBM |
 		    IEEE80211_HW_NOISE_DBM;
 
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_AP) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
+
 	/* 4 EDCA QOS priorities */
 	hw->queues = 4;
 

drivers/net/wireless/mac80211_hwsim.c

@@ -447,6 +447,9 @@ static int __init init_mac80211_hwsim(void)
 
 		hw->channel_change_time = 1;
 		hw->queues = 4;
+		hw->wiphy->interface_modes =
+			BIT(NL80211_IFTYPE_STATION) |
+			BIT(NL80211_IFTYPE_AP);
 		hw->ampdu_queues = 1;
 
 		memcpy(data->channels, hwsim_channels, sizeof(hwsim_channels));

drivers/net/wireless/p54/p54.h

@@ -19,13 +19,24 @@ enum control_frame_types {
 	P54_CONTROL_TYPE_CHANNEL_CHANGE,
 	P54_CONTROL_TYPE_FREQDONE,
 	P54_CONTROL_TYPE_DCFINIT,
-	P54_CONTROL_TYPE_FREEQUEUE = 7,
+	P54_CONTROL_TYPE_ENCRYPTION,
+	P54_CONTROL_TYPE_TIM,
+	P54_CONTROL_TYPE_POWERMGT,
+	P54_CONTROL_TYPE_FREEQUEUE,
 	P54_CONTROL_TYPE_TXDONE,
 	P54_CONTROL_TYPE_PING,
 	P54_CONTROL_TYPE_STAT_READBACK,
 	P54_CONTROL_TYPE_BBP,
 	P54_CONTROL_TYPE_EEPROM_READBACK,
-	P54_CONTROL_TYPE_LED
+	P54_CONTROL_TYPE_LED,
+	P54_CONTROL_TYPE_GPIO,
+	P54_CONTROL_TYPE_TIMER,
+	P54_CONTROL_TYPE_MODULATION,
+	P54_CONTROL_TYPE_SYNTH_CONFIG,
+	P54_CONTROL_TYPE_DETECTOR_VALUE,
+	P54_CONTROL_TYPE_XBOW_SYNTH_CFG,
+	P54_CONTROL_TYPE_CCE_QUIET,
+	P54_CONTROL_TYPE_PSM_STA_UNLOCK,
 };
 
 struct p54_control_hdr {
@@ -38,11 +49,15 @@ struct p54_control_hdr {
 	u8 data[0];
 } __attribute__ ((packed));
 
-#define EEPROM_READBACK_LEN (sizeof(struct p54_control_hdr) + 4 /* p54_eeprom_lm86 */)
-#define MAX_RX_SIZE (IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct p54_control_hdr) + 20 /* length of struct p54_rx_hdr */ + 16 )
+#define EEPROM_READBACK_LEN 0x3fc
 
 #define ISL38XX_DEV_FIRMWARE_ADDR 0x20000
 
+#define FW_FMAC 0x464d4143
+#define FW_LM86 0x4c4d3836
+#define FW_LM87 0x4c4d3837
+#define FW_LM20 0x4c4d3230
+
 struct p54_common {
 	u32 rx_start;
 	u32 rx_end;
@@ -53,26 +68,33 @@ struct p54_common {
 	void (*stop)(struct ieee80211_hw *dev);
 	int mode;
 	u16 seqno;
+	u16 rx_mtu;
+	u8 headroom;
+	u8 tailroom;
 	struct mutex conf_mutex;
 	u8 mac_addr[ETH_ALEN];
 	u8 bssid[ETH_ALEN];
+	__le16 filter_type;
 	struct pda_iq_autocal_entry *iq_autocal;
 	unsigned int iq_autocal_len;
 	struct pda_channel_output_limit *output_limit;
 	unsigned int output_limit_len;
 	struct pda_pa_curve_data *curve_data;
-	__le16 rxhw;
+	u16 rxhw;
 	u8 version;
+	u8 rx_antenna;
 	unsigned int tx_hdr_len;
 	void *cached_vdcf;
 	unsigned int fw_var;
+	unsigned int fw_interface;
 	struct ieee80211_tx_queue_stats tx_stats[8];
+	void *eeprom;
+	struct completion eeprom_comp;
 };
 
 int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb);
-void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw);
-int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len);
-void p54_fill_eeprom_readback(struct p54_control_hdr *hdr);
+int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw);
+int p54_read_eeprom(struct ieee80211_hw *dev);
 struct ieee80211_hw *p54_init_common(size_t priv_data_len);
 void p54_free_common(struct ieee80211_hw *dev);
 

drivers/net/wireless/p54/p54common.c

@@ -66,8 +66,7 @@ static struct ieee80211_supported_band band_2GHz = {
 	.n_bitrates = ARRAY_SIZE(p54_rates),
 };
 
-
-void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
+int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 {
 	struct p54_common *priv = dev->priv;
 	struct bootrec_exp_if *exp_if;
@@ -79,7 +78,7 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 	int i;
 
 	if (priv->rx_start)
-		return;
+		return 0;
 
 	while (data < end_data && *data)
 		data++;
@@ -94,7 +93,8 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 		u32 code = le32_to_cpu(bootrec->code);
 		switch (code) {
 		case BR_CODE_COMPONENT_ID:
-			switch (be32_to_cpu(*(__be32 *)bootrec->data)) {
+			priv->fw_interface = be32_to_cpup(bootrec->data);
+			switch (priv->fw_interface) {
 			case FW_FMAC:
 				printk(KERN_INFO "p54: FreeMAC firmware\n");
 				break;
@@ -105,7 +105,7 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 				printk(KERN_INFO "p54: LM86 firmware\n");
 				break;
 			case FW_LM87:
-				printk(KERN_INFO "p54: LM87 firmware - not supported yet!\n");
+				printk(KERN_INFO "p54: LM87 firmware\n");
 				break;
 			default:
 				printk(KERN_INFO "p54: unknown firmware\n");
@@ -117,11 +117,22 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 			if (strnlen((unsigned char*)bootrec->data, 24) < 24)
 				fw_version = (unsigned char*)bootrec->data;
 			break;
-		case BR_CODE_DESCR:
-			priv->rx_start = le32_to_cpu(((__le32 *)bootrec->data)[1]);
+		case BR_CODE_DESCR: {
+			struct bootrec_desc *desc =
+				(struct bootrec_desc *)bootrec->data;
+			priv->rx_start = le32_to_cpu(desc->rx_start);
 			/* FIXME add sanity checking */
-			priv->rx_end = le32_to_cpu(((__le32 *)bootrec->data)[2]) - 0x3500;
+			priv->rx_end = le32_to_cpu(desc->rx_end) - 0x3500;
+			priv->headroom = desc->headroom;
+			priv->tailroom = desc->tailroom;
+			if (bootrec->len == 11)
+				priv->rx_mtu = (size_t) le16_to_cpu(
+					(__le16)bootrec->data[10]);
+			else
+				priv->rx_mtu = (size_t)
+					0x620 - priv->tx_hdr_len;
 			break;
+			}
 		case BR_CODE_EXPOSED_IF:
 			exp_if = (struct bootrec_exp_if *) bootrec->data;
 			for (i = 0; i < (len * sizeof(*exp_if) / 4); i++)
@@ -152,6 +163,8 @@ void p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 		priv->tx_stats[7].limit = 1;
 		dev->queues = 4;
 	}
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(p54_parse_firmware);
 
@@ -237,6 +250,9 @@ static int p54_convert_rev1(struct ieee80211_hw *dev,
 	return 0;
 }
 
+const char* p54_rf_chips[] = { "NULL", "Indigo?", "Duette",
+                              "Frisbee", "Xbow", "Longbow" };
+
 int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 {
 	struct p54_common *priv = dev->priv;
@@ -246,6 +262,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 	void *tmp;
 	int err;
 	u8 *end = (u8 *)eeprom + len;
+	DECLARE_MAC_BUF(mac);
 
 	wrap = (struct eeprom_pda_wrap *) eeprom;
 	entry = (void *)wrap->data + le16_to_cpu(wrap->len);
@@ -327,7 +344,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 			while ((u8 *)tmp < entry->data + data_len) {
 				struct bootrec_exp_if *exp_if = tmp;
 				if (le16_to_cpu(exp_if->if_id) == 0xF)
-					priv->rxhw = exp_if->variant & cpu_to_le16(0x07);
+					priv->rxhw = le16_to_cpu(exp_if->variant) & 0x07;
 				tmp += sizeof(struct bootrec_exp_if);
 			}
 			break;
@@ -353,6 +370,37 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 		goto err;
 	}
 
+	switch (priv->rxhw) {
+		case 4: /* XBow */
+		case 1: /* Indigo? */
+		case 2: /* Duette */
+			/* TODO: 5GHz initialization goes here */
+
+		case 3: /* Frisbee */
+		case 5: /* Longbow */
+			dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
+			break;
+		default:
+			printk(KERN_ERR "%s: unsupported RF-Chip\n",
+				wiphy_name(dev->wiphy));
+			err = -EINVAL;
+			goto err;
+	}
+
+	if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
+		u8 perm_addr[ETH_ALEN];
+
+		printk(KERN_WARNING "%s: Invalid hwaddr! Using randomly generated MAC addr\n",
+			wiphy_name(dev->wiphy));
+		random_ether_addr(perm_addr);
+		SET_IEEE80211_PERM_ADDR(dev, perm_addr);
+	}
+
+	printk(KERN_INFO "%s: hwaddr %s, MAC:isl38%02x RF:%s\n",
+		wiphy_name(dev->wiphy),
+		print_mac(mac, dev->wiphy->perm_addr),
+		priv->version, p54_rf_chips[priv->rxhw]);
+
 	return 0;
 
   err:
@@ -376,25 +424,12 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
 }
 EXPORT_SYMBOL_GPL(p54_parse_eeprom);
 
-void p54_fill_eeprom_readback(struct p54_control_hdr *hdr)
-{
-	struct p54_eeprom_lm86 *eeprom_hdr;
-
-	hdr->magic1 = cpu_to_le16(0x8000);
-	hdr->len = cpu_to_le16(sizeof(*eeprom_hdr) + 0x2000);
-	hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK);
-	hdr->retry1 = hdr->retry2 = 0;
-	eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data;
-	eeprom_hdr->offset = 0x0;
-	eeprom_hdr->len = cpu_to_le16(0x2000);
-}
-EXPORT_SYMBOL_GPL(p54_fill_eeprom_readback);
-
-static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
+static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54_rx_hdr *hdr = (struct p54_rx_hdr *) skb->data;
 	struct ieee80211_rx_status rx_status = {0};
 	u16 freq = le16_to_cpu(hdr->freq);
+	size_t header_len = sizeof(*hdr);
 
 	rx_status.signal = hdr->rssi;
 	/* XX correct? */
@@ -406,10 +441,15 @@ static void p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 	rx_status.mactime = le64_to_cpu(hdr->timestamp);
 	rx_status.flag |= RX_FLAG_TSFT;
 
-	skb_pull(skb, sizeof(*hdr));
+	if (hdr->magic & cpu_to_le16(0x4000))
+		header_len += hdr->align[0];
+
+	skb_pull(skb, header_len);
 	skb_trim(skb, le16_to_cpu(hdr->len));
 
 	ieee80211_rx_irqsafe(dev, skb, &rx_status);
+
+	return -1;
 }
 
 static void inline p54_wake_free_queues(struct ieee80211_hw *dev)
@@ -428,7 +468,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data;
 	struct p54_frame_sent_hdr *payload = (struct p54_frame_sent_hdr *) hdr->data;
 	struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
-	u32 addr = le32_to_cpu(hdr->req_id) - 0x70;
+	u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
 	struct memrecord *range = NULL;
 	u32 freed = 0;
 	u32 last_addr = priv->rx_start;
@@ -487,7 +527,22 @@ out:
 		p54_wake_free_queues(dev);
 }
 
-static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb)
+static void p54_rx_eeprom_readback(struct ieee80211_hw *dev,
+				   struct sk_buff *skb)
+{
+	struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data;
+	struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr->data;
+	struct p54_common *priv = dev->priv;
+
+	if (!priv->eeprom)
+		return ;
+
+	memcpy(priv->eeprom, eeprom->data, eeprom->len);
+
+	complete(&priv->eeprom_comp);
+}
+
+static int p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct p54_control_hdr *hdr = (struct p54_control_hdr *) skb->data;
 
@@ -497,36 +552,27 @@ static void p54_rx_control(struct ieee80211_hw *dev, struct sk_buff *skb)
 		break;
 	case P54_CONTROL_TYPE_BBP:
 		break;
+	case P54_CONTROL_TYPE_EEPROM_READBACK:
+		p54_rx_eeprom_readback(dev, skb);
+		break;
 	default:
 		printk(KERN_DEBUG "%s: not handling 0x%02x type control frame\n",
 		       wiphy_name(dev->wiphy), le16_to_cpu(hdr->type));
 		break;
 	}
+
+	return 0;
 }
 
 /* returns zero if skb can be reused */
 int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	u8 type = le16_to_cpu(*((__le16 *)skb->data)) >> 8;
-	switch (type) {
-	case 0x00:
-	case 0x01:
-		p54_rx_data(dev, skb);
-		return -1;
-	case 0x4d:
-		/* TODO: do something better... but then again, I've never seen this happen */
-		printk(KERN_ERR "%s: Received fault. Probably need to restart hardware now..\n",
-		       wiphy_name(dev->wiphy));
-		break;
-	case 0x80:
-		p54_rx_control(dev, skb);
-		break;
-	default:
-		printk(KERN_ERR "%s: unknown frame RXed (0x%02x)\n",
-		       wiphy_name(dev->wiphy), type);
-		break;
-	}
-	return 0;
+
+	if (type == 0x80)
+		return p54_rx_control(dev, skb);
+	else
+		return p54_rx_data(dev, skb);
 }
 EXPORT_SYMBOL_GPL(p54_rx);
 
@@ -550,7 +596,7 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 	u32 target_addr = priv->rx_start;
 	unsigned long flags;
 	unsigned int left;
-	len = (len + 0x170 + 3) & ~0x3; /* 0x70 headroom, 0x100 tailroom */
+	len = (len + priv->headroom + priv->tailroom + 3) & ~0x3;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
 	left = skb_queue_len(&priv->tx_queue);
@@ -585,15 +631,74 @@ static void p54_assign_address(struct ieee80211_hw *dev, struct sk_buff *skb,
 		range->start_addr = target_addr;
 		range->end_addr = target_addr + len;
 		__skb_queue_after(&priv->tx_queue, target_skb, skb);
-		if (largest_hole < IEEE80211_MAX_RTS_THRESHOLD + 0x170 +
+		if (largest_hole < priv->rx_mtu + priv->headroom +
+				   priv->tailroom +
 				   sizeof(struct p54_control_hdr))
 			ieee80211_stop_queues(dev);
 	}
 	spin_unlock_irqrestore(&priv->tx_queue.lock, flags);
 
-	data->req_id = cpu_to_le32(target_addr + 0x70);
+	data->req_id = cpu_to_le32(target_addr + priv->headroom);
 }
 
+int p54_read_eeprom(struct ieee80211_hw *dev)
+{
+	struct p54_common *priv = dev->priv;
+	struct p54_control_hdr *hdr = NULL;
+	struct p54_eeprom_lm86 *eeprom_hdr;
+	size_t eeprom_size = 0x2020, offset = 0, blocksize;
+	int ret = -ENOMEM;
+	void *eeprom = NULL;
+
+	hdr = (struct p54_control_hdr *)kzalloc(sizeof(*hdr) +
+		sizeof(*eeprom_hdr) + EEPROM_READBACK_LEN, GFP_KERNEL);
+	if (!hdr)
+		goto free;
+
+	priv->eeprom = kzalloc(EEPROM_READBACK_LEN, GFP_KERNEL);
+	if (!priv->eeprom)
+		goto free;
+
+	eeprom = kzalloc(eeprom_size, GFP_KERNEL);
+	if (!eeprom)
+		goto free;
+
+	hdr->magic1 = cpu_to_le16(0x8000);
+	hdr->type = cpu_to_le16(P54_CONTROL_TYPE_EEPROM_READBACK);
+	hdr->retry1 = hdr->retry2 = 0;
+	eeprom_hdr = (struct p54_eeprom_lm86 *) hdr->data;
+
+	while (eeprom_size) {
+		blocksize = min(eeprom_size, (size_t)EEPROM_READBACK_LEN);
+		hdr->len = cpu_to_le16(blocksize + sizeof(*eeprom_hdr));
+		eeprom_hdr->offset = cpu_to_le16(offset);
+		eeprom_hdr->len = cpu_to_le16(blocksize);
+		p54_assign_address(dev, NULL, hdr, hdr->len + sizeof(*hdr));
+	        priv->tx(dev, hdr, hdr->len + sizeof(*hdr), 0);
+
+		if (!wait_for_completion_interruptible_timeout(&priv->eeprom_comp, HZ)) {
+			printk(KERN_ERR "%s: device does not respond!\n",
+				wiphy_name(dev->wiphy));
+			ret = -EBUSY;
+			goto free;
+	        }
+
+		memcpy(eeprom + offset, priv->eeprom, blocksize);
+		offset += blocksize;
+		eeprom_size -= blocksize;
+	}
+
+	ret = p54_parse_eeprom(dev, eeprom, offset);
+free:
+	kfree(priv->eeprom);
+	priv->eeprom = NULL;
+	kfree(hdr);
+	kfree(eeprom);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(p54_read_eeprom);
+
 static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
@@ -675,12 +780,12 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 }
 
 static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type,
-			  const u8 *dst, const u8 *src, u8 antenna,
-			  u32 magic3, u32 magic8, u32 magic9)
+			  const u8 *bssid)
 {
 	struct p54_common *priv = dev->priv;
 	struct p54_control_hdr *hdr;
 	struct p54_tx_control_filter *filter;
+	size_t data_len;
 
 	hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) +
 		      priv->tx_hdr_len, GFP_ATOMIC);
@@ -691,25 +796,35 @@ static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type,
 
 	filter = (struct p54_tx_control_filter *) hdr->data;
 	hdr->magic1 = cpu_to_le16(0x8001);
-	hdr->len = cpu_to_le16(sizeof(*filter));
-	p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*filter));
 	hdr->type = cpu_to_le16(P54_CONTROL_TYPE_FILTER_SET);
 
-	filter->filter_type = cpu_to_le16(filter_type);
-	memcpy(filter->dst, dst, ETH_ALEN);
-	if (!src)
-		memset(filter->src, ~0, ETH_ALEN);
+	priv->filter_type = filter->filter_type = cpu_to_le16(filter_type);
+	memcpy(filter->mac_addr, priv->mac_addr, ETH_ALEN);
+	if (!bssid)
+		memset(filter->bssid, ~0, ETH_ALEN);
 	else
-		memcpy(filter->src, src, ETH_ALEN);
-	filter->antenna = antenna;
-	filter->magic3 = cpu_to_le32(magic3);
-	filter->rx_addr = cpu_to_le32(priv->rx_end);
-	filter->max_rx = cpu_to_le16(0x0620);	/* FIXME: for usb ver 1.. maybe */
-	filter->rxhw = priv->rxhw;
-	filter->magic8 = cpu_to_le16(magic8);
-	filter->magic9 = cpu_to_le16(magic9);
-
-	priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*filter), 1);
+		memcpy(filter->bssid, bssid, ETH_ALEN);
+
+	filter->rx_antenna = priv->rx_antenna;
+
+	if (priv->fw_var < 0x500) {
+		data_len = P54_TX_CONTROL_FILTER_V1_LEN;
+		filter->v1.basic_rate_mask = cpu_to_le32(0x15F);
+		filter->v1.rx_addr = cpu_to_le32(priv->rx_end);
+		filter->v1.max_rx = cpu_to_le16(priv->rx_mtu);
+		filter->v1.rxhw = cpu_to_le16(priv->rxhw);
+		filter->v1.wakeup_timer = cpu_to_le16(500);
+	} else {
+		data_len = P54_TX_CONTROL_FILTER_V2_LEN;
+		filter->v2.rx_addr = cpu_to_le32(priv->rx_end);
+		filter->v2.max_rx = cpu_to_le16(priv->rx_mtu);
+		filter->v2.rxhw = cpu_to_le16(priv->rxhw);
+		filter->v2.timer = cpu_to_le16(1000);
+	}
+
+	hdr->len = cpu_to_le16(data_len);
+	p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + data_len);
+	priv->tx(dev, hdr, sizeof(*hdr) + data_len, 1);
 	return 0;
 }
 
@@ -719,6 +834,7 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq)
 	struct p54_control_hdr *hdr;
 	struct p54_tx_control_channel *chan;
 	unsigned int i;
+	size_t data_len;
 	void *entry;
 
 	hdr = kzalloc(sizeof(*hdr) + sizeof(*chan) +
@@ -731,9 +847,8 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq)
 	chan = (struct p54_tx_control_channel *) hdr->data;
 
 	hdr->magic1 = cpu_to_le16(0x8001);
-	hdr->len = cpu_to_le16(sizeof(*chan));
+
 	hdr->type = cpu_to_le16(P54_CONTROL_TYPE_CHANNEL_CHANGE);
-	p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + sizeof(*chan));
 
 	chan->flags = cpu_to_le16(0x1);
 	chan->dwell = cpu_to_le16(0x0);
@@ -785,10 +900,20 @@ static int p54_set_freq(struct ieee80211_hw *dev, __le16 freq)
 		break;
 	}
 
-	chan->rssical_mul = cpu_to_le16(130);
-	chan->rssical_add = cpu_to_le16(0xfe70);	/* -400 */
+	if (priv->fw_var < 0x500) {
+		data_len = P54_TX_CONTROL_CHANNEL_V1_LEN;
+		chan->v1.rssical_mul = cpu_to_le16(130);
+		chan->v1.rssical_add = cpu_to_le16(0xfe70);
+	} else {
+		data_len = P54_TX_CONTROL_CHANNEL_V2_LEN;
+		chan->v2.rssical_mul = cpu_to_le16(130);
+		chan->v2.rssical_add = cpu_to_le16(0xfe70);
+		chan->v2.basic_rate_mask = cpu_to_le32(0x15f);
+	}
 
-	priv->tx(dev, hdr, sizeof(*hdr) + sizeof(*chan), 1);
+	hdr->len = cpu_to_le16(data_len);
+	p54_assign_address(dev, NULL, hdr, sizeof(*hdr) + data_len);
+	priv->tx(dev, hdr, sizeof(*hdr) + data_len, 1);
 	return 0;
 
  err:
@@ -933,12 +1058,11 @@ static int p54_add_interface(struct ieee80211_hw *dev,
 
 	memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN);
 
-	p54_set_filter(dev, 0, priv->mac_addr, NULL, 0, 1, 0, 0xF642);
-	p54_set_filter(dev, 0, priv->mac_addr, NULL, 1, 0, 0, 0xF642);
+	p54_set_filter(dev, 0, NULL);
 
 	switch (conf->type) {
 	case IEEE80211_IF_TYPE_STA:
-		p54_set_filter(dev, 1, priv->mac_addr, NULL, 0, 0x15F, 0x1F4, 0);
+		p54_set_filter(dev, 1, NULL);
 		break;
 	default:
 		BUG();	/* impossible */
@@ -956,7 +1080,7 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 	struct p54_common *priv = dev->priv;
 	priv->mode = IEEE80211_IF_TYPE_MNTR;
 	memset(priv->mac_addr, 0, ETH_ALEN);
-	p54_set_filter(dev, 0, priv->mac_addr, NULL, 2, 0, 0, 0);
+	p54_set_filter(dev, 0, NULL);
 }
 
 static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
@@ -965,6 +1089,8 @@ static int p54_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf)
 	struct p54_common *priv = dev->priv;
 
 	mutex_lock(&priv->conf_mutex);
+	priv->rx_antenna = (conf->antenna_sel_rx == 0) ?
+		2 : conf->antenna_sel_tx - 1;
 	ret = p54_set_freq(dev, cpu_to_le16(conf->channel->center_freq));
 	p54_set_vdcf(dev);
 	mutex_unlock(&priv->conf_mutex);
@@ -978,8 +1104,7 @@ static int p54_config_interface(struct ieee80211_hw *dev,
 	struct p54_common *priv = dev->priv;
 
 	mutex_lock(&priv->conf_mutex);
-	p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 0, 1, 0, 0xF642);
-	p54_set_filter(dev, 0, priv->mac_addr, conf->bssid, 2, 0, 0, 0);
+	p54_set_filter(dev, 0, conf->bssid);
 	p54_set_leds(dev, 1, !is_multicast_ether_addr(conf->bssid), 0);
 	memcpy(priv->bssid, conf->bssid, ETH_ALEN);
 	mutex_unlock(&priv->conf_mutex);
@@ -997,11 +1122,9 @@ static void p54_configure_filter(struct ieee80211_hw *dev,
 
 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) {
 		if (*total_flags & FIF_BCN_PRBRESP_PROMISC)
-			p54_set_filter(dev, 0, priv->mac_addr,
-				       NULL, 2, 0, 0, 0);
+			p54_set_filter(dev, 0, NULL);
 		else
-			p54_set_filter(dev, 0, priv->mac_addr,
-				       priv->bssid, 2, 0, 0, 0);
+			p54_set_filter(dev, 0, priv->bssid);
 	}
 }
 
@@ -1068,10 +1191,12 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	priv = dev->priv;
 	priv->mode = IEEE80211_IF_TYPE_INVALID;
 	skb_queue_head_init(&priv->tx_queue);
-	dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band_2GHz;
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | /* not sure */
 		     IEEE80211_HW_RX_INCLUDES_FCS |
 		     IEEE80211_HW_SIGNAL_UNSPEC;
+
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
 	dev->channel_change_time = 1000;	/* TODO: find actual value */
 	dev->max_signal = 127;
 
@@ -1081,11 +1206,11 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	priv->tx_stats[3].limit = 1;
 	priv->tx_stats[4].limit = 5;
 	dev->queues = 1;
-
 	dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
 				 sizeof(struct p54_tx_control_allocdata);
 
 	mutex_init(&priv->conf_mutex);
+	init_completion(&priv->eeprom_comp);
 
 	return dev;
 }

drivers/net/wireless/p54/p54common.h

@@ -29,6 +29,17 @@ struct bootrec_exp_if {
 	__le16 top_compat;
 } __attribute__((packed));
 
+struct bootrec_desc {
+	__le16 modes;
+	__le16 flags;
+	__le32 rx_start;
+	__le32 rx_end;
+	u8 headroom;
+	u8 tailroom;
+	u8 unimportant[6];
+	u8 rates[16];
+} __attribute__((packed));
+
 #define BR_CODE_MIN			0x80000000
 #define BR_CODE_COMPONENT_ID		0x80000001
 #define BR_CODE_COMPONENT_VERSION	0x80000002
@@ -39,11 +50,6 @@ struct bootrec_exp_if {
 #define BR_CODE_END_OF_BRA		0xFF0000FF
 #define LEGACY_BR_CODE_END_OF_BRA	0xFFFFFFFF
 
-#define FW_FMAC 0x464d4143
-#define FW_LM86 0x4c4d3836
-#define FW_LM87 0x4c4d3837
-#define FW_LM20 0x4c4d3230
-
 /* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
 
 struct pda_entry {
@@ -180,7 +186,7 @@ struct p54_rx_hdr {
 	u8 quality;
 	u16 unknown2;
 	__le64 timestamp;
-	u8 data[0];
+	u8 align[0];
 } __attribute__ ((packed));
 
 struct p54_frame_sent_hdr {
@@ -208,19 +214,34 @@ struct p54_tx_control_allocdata {
 
 struct p54_tx_control_filter {
 	__le16 filter_type;
-	u8 dst[ETH_ALEN];
-	u8 src[ETH_ALEN];
-	u8 antenna;
-	u8 debug;
-	__le32 magic3;
-	u8 rates[8];	// FIXME: what's this for?
-	__le32 rx_addr;
-	__le16 max_rx;
-	__le16 rxhw;
-	__le16 magic8;
-	__le16 magic9;
+	u8 mac_addr[ETH_ALEN];
+	u8 bssid[ETH_ALEN];
+	u8 rx_antenna;
+	u8 rx_align;
+	union {
+		struct {
+			__le32 basic_rate_mask;
+			u8 rts_rates[8];
+			__le32 rx_addr;
+			__le16 max_rx;
+			__le16 rxhw;
+			__le16 wakeup_timer;
+			__le16 unalloc0;
+		} v1 __attribute__ ((packed));
+		struct {
+			__le32 rx_addr;
+			__le16 max_rx;
+			__le16 rxhw;
+			__le16 timer;
+			__le16 unalloc0;
+			__le32 unalloc1;
+		} v2 __attribute__ ((packed));
+	} __attribute__ ((packed));
 } __attribute__ ((packed));
 
+#define P54_TX_CONTROL_FILTER_V1_LEN (sizeof(struct p54_tx_control_filter))
+#define P54_TX_CONTROL_FILTER_V2_LEN (sizeof(struct p54_tx_control_filter)-8)
+
 struct p54_tx_control_channel {
 	__le16 flags;
 	__le16 dwell;
@@ -232,15 +253,29 @@ struct p54_tx_control_channel {
 	u8 val_qpsk;
 	u8 val_16qam;
 	u8 val_64qam;
-	struct pda_pa_curve_data_sample_rev1 curve_data[8];
+	struct p54_pa_curve_data_sample curve_data[8];
 	u8 dup_bpsk;
 	u8 dup_qpsk;
 	u8 dup_16qam;
 	u8 dup_64qam;
-	__le16 rssical_mul;
-	__le16 rssical_add;
+	union {
+		struct {
+			__le16 rssical_mul;
+			__le16 rssical_add;
+		} v1 __attribute__ ((packed));
+
+		struct {
+			__le32 basic_rate_mask;
+			 u8 rts_rates[8];
+			__le16 rssical_mul;
+			__le16 rssical_add;
+		} v2 __attribute__ ((packed));
+	} __attribute__ ((packed));
 } __attribute__ ((packed));
 
+#define P54_TX_CONTROL_CHANNEL_V1_LEN (sizeof(struct p54_tx_control_channel)-12)
+#define P54_TX_CONTROL_CHANNEL_V2_LEN (sizeof(struct p54_tx_control_channel))
+
 struct p54_tx_control_led {
 	__le16 mode;
 	__le16 led_temporary;

drivers/net/wireless/p54/p54pci.c

@@ -72,8 +72,6 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev)
 	P54P_WRITE(ctrl_stat, reg);
 	wmb();
 
-	mdelay(50);
-
 	err = request_firmware(&fw_entry, "isl3886", &priv->pdev->dev);
 	if (err) {
 		printk(KERN_ERR "%s (p54pci): cannot find firmware "
@@ -81,7 +79,11 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev)
 		return err;
 	}
 
-	p54_parse_firmware(dev, fw_entry);
+	err = p54_parse_firmware(dev, fw_entry);
+	if (err) {
+		release_firmware(fw_entry);
+		return err;
+	}
 
 	data = (__le32 *) fw_entry->data;
 	remains = fw_entry->size;
@@ -122,120 +124,10 @@ static int p54p_upload_firmware(struct ieee80211_hw *dev)
 	wmb();
 	udelay(10);
 
-	return 0;
-}
-
-static irqreturn_t p54p_simple_interrupt(int irq, void *dev_id)
-{
-	struct p54p_priv *priv = (struct p54p_priv *) dev_id;
-	__le32 reg;
-
-	reg = P54P_READ(int_ident);
-	P54P_WRITE(int_ack, reg);
-
-	if (reg & P54P_READ(int_enable))
-		complete(&priv->boot_comp);
-
-	return IRQ_HANDLED;
-}
-
-static int p54p_read_eeprom(struct ieee80211_hw *dev)
-{
-	struct p54p_priv *priv = dev->priv;
-	struct p54p_ring_control *ring_control = priv->ring_control;
-	int err;
-	struct p54_control_hdr *hdr;
-	void *eeprom;
-	dma_addr_t rx_mapping, tx_mapping;
-	u16 alen;
-
-	init_completion(&priv->boot_comp);
-	err = request_irq(priv->pdev->irq, &p54p_simple_interrupt,
-			  IRQF_SHARED, "p54pci", priv);
-	if (err) {
-		printk(KERN_ERR "%s (p54pci): failed to register IRQ handler\n",
-		       pci_name(priv->pdev));
-		return err;
-	}
-
-	eeprom = kmalloc(0x2010 + EEPROM_READBACK_LEN, GFP_KERNEL);
-	if (!eeprom) {
-		printk(KERN_ERR "%s (p54pci): no memory for eeprom!\n",
-		       pci_name(priv->pdev));
-		err = -ENOMEM;
-		goto out;
-	}
-
-	memset(ring_control, 0, sizeof(*ring_control));
-	P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
-	P54P_READ(ring_control_base);
-	udelay(10);
-
-	P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_INIT));
-	P54P_READ(int_enable);
-	udelay(10);
-
-	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
-
-	if (!wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ)) {
-		printk(KERN_ERR "%s (p54pci): Cannot boot firmware!\n",
-		       pci_name(priv->pdev));
-		err = -EINVAL;
-		goto out;
-	}
-
-	P54P_WRITE(int_enable, cpu_to_le32(ISL38XX_INT_IDENT_UPDATE));
-	P54P_READ(int_enable);
-
-	hdr = eeprom + 0x2010;
-	p54_fill_eeprom_readback(hdr);
-	hdr->req_id = cpu_to_le32(priv->common.rx_start);
-
-	rx_mapping = pci_map_single(priv->pdev, eeprom,
-				    0x2010, PCI_DMA_FROMDEVICE);
-	tx_mapping = pci_map_single(priv->pdev, (void *)hdr,
-				    EEPROM_READBACK_LEN, PCI_DMA_TODEVICE);
-
-	ring_control->rx_mgmt[0].host_addr = cpu_to_le32(rx_mapping);
-	ring_control->rx_mgmt[0].len = cpu_to_le16(0x2010);
-	ring_control->tx_data[0].host_addr = cpu_to_le32(tx_mapping);
-	ring_control->tx_data[0].device_addr = hdr->req_id;
-	ring_control->tx_data[0].len = cpu_to_le16(EEPROM_READBACK_LEN);
-
-	ring_control->host_idx[2] = cpu_to_le32(1);
-	ring_control->host_idx[1] = cpu_to_le32(1);
-
-	wmb();
+	/* wait for the firmware to boot properly */
 	mdelay(100);
-	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE));
 
-	wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ);
-	wait_for_completion_interruptible_timeout(&priv->boot_comp, HZ);
-
-	pci_unmap_single(priv->pdev, tx_mapping,
-			 EEPROM_READBACK_LEN, PCI_DMA_TODEVICE);
-	pci_unmap_single(priv->pdev, rx_mapping,
-			 0x2010, PCI_DMA_FROMDEVICE);
-
-	alen = le16_to_cpu(ring_control->rx_mgmt[0].len);
-	if (le32_to_cpu(ring_control->device_idx[2]) != 1 ||
-	    alen < 0x10) {
-		printk(KERN_ERR "%s (p54pci): Cannot read eeprom!\n",
-		       pci_name(priv->pdev));
-		err = -EINVAL;
-		goto out;
-	}
-
-	p54_parse_eeprom(dev, (u8 *)eeprom + 0x10, alen - 0x10);
-
- out:
-	kfree(eeprom);
-	P54P_WRITE(int_enable, cpu_to_le32(0));
-	P54P_READ(int_enable);
-	udelay(10);
-	free_irq(priv->pdev->irq, priv);
-	P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_RESET));
-	return err;
+	return 0;
 }
 
 static void p54p_refill_rx_ring(struct ieee80211_hw *dev,
@@ -258,17 +150,17 @@ static void p54p_refill_rx_ring(struct ieee80211_hw *dev,
 		if (!desc->host_addr) {
 			struct sk_buff *skb;
 			dma_addr_t mapping;
-			skb = dev_alloc_skb(MAX_RX_SIZE);
+			skb = dev_alloc_skb(priv->common.rx_mtu + 32);
 			if (!skb)
 				break;
 
 			mapping = pci_map_single(priv->pdev,
 						 skb_tail_pointer(skb),
-						 MAX_RX_SIZE,
+						 priv->common.rx_mtu + 32,
 						 PCI_DMA_FROMDEVICE);
 			desc->host_addr = cpu_to_le32(mapping);
 			desc->device_addr = 0;	// FIXME: necessary?
-			desc->len = cpu_to_le16(MAX_RX_SIZE);
+			desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
 			desc->flags = 0;
 			rx_buf[i] = skb;
 		}
@@ -301,20 +193,23 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
 		len = le16_to_cpu(desc->len);
 		skb = rx_buf[i];
 
-		if (!skb)
+		if (!skb) {
+			i++;
+			i %= ring_limit;
 			continue;
-
+		}
 		skb_put(skb, len);
 
 		if (p54_rx(dev, skb)) {
 			pci_unmap_single(priv->pdev,
 					 le32_to_cpu(desc->host_addr),
-					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+					 priv->common.rx_mtu + 32,
+					 PCI_DMA_FROMDEVICE);
 			rx_buf[i] = NULL;
 			desc->host_addr = 0;
 		} else {
 			skb_trim(skb, 0);
-			desc->len = cpu_to_le16(MAX_RX_SIZE);
+			desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
 		}
 
 		i++;
@@ -466,6 +361,11 @@ static int p54p_open(struct ieee80211_hw *dev)
 	}
 
 	memset(priv->ring_control, 0, sizeof(*priv->ring_control));
+	err = p54p_upload_firmware(dev);
+	if (err) {
+		free_irq(priv->pdev->irq, dev);
+		return err;
+	}
 	priv->rx_idx_data = priv->tx_idx_data = 0;
 	priv->rx_idx_mgmt = priv->tx_idx_mgmt = 0;
 
@@ -475,8 +375,6 @@ static int p54p_open(struct ieee80211_hw *dev)
 	p54p_refill_rx_ring(dev, 2, priv->ring_control->rx_mgmt,
 		ARRAY_SIZE(priv->ring_control->rx_mgmt), priv->rx_buf_mgmt);
 
-	p54p_upload_firmware(dev);
-
 	P54P_WRITE(ring_control_base, cpu_to_le32(priv->ring_control_dma));
 	P54P_READ(ring_control_base);
 	wmb();
@@ -532,7 +430,8 @@ static void p54p_stop(struct ieee80211_hw *dev)
 		if (desc->host_addr)
 			pci_unmap_single(priv->pdev,
 					 le32_to_cpu(desc->host_addr),
-					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+					 priv->common.rx_mtu + 32,
+					 PCI_DMA_FROMDEVICE);
 		kfree_skb(priv->rx_buf_data[i]);
 		priv->rx_buf_data[i] = NULL;
 	}
@@ -542,7 +441,8 @@ static void p54p_stop(struct ieee80211_hw *dev)
 		if (desc->host_addr)
 			pci_unmap_single(priv->pdev,
 					 le32_to_cpu(desc->host_addr),
-					 MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+					 priv->common.rx_mtu + 32,
+					 PCI_DMA_FROMDEVICE);
 		kfree_skb(priv->rx_buf_mgmt[i]);
 		priv->rx_buf_mgmt[i] = NULL;
 	}
@@ -649,16 +549,6 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 		err = -ENOMEM;
 		goto err_iounmap;
 	}
-	memset(priv->ring_control, 0, sizeof(*priv->ring_control));
-
-	err = p54p_upload_firmware(dev);
-	if (err)
-		goto err_free_desc;
-
-	err = p54p_read_eeprom(dev);
-	if (err)
-		goto err_free_desc;
-
 	priv->common.open = p54p_open;
 	priv->common.stop = p54p_stop;
 	priv->common.tx = p54p_tx;
@@ -666,6 +556,12 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 	spin_lock_init(&priv->lock);
 	tasklet_init(&priv->rx_tasklet, p54p_rx_tasklet, (unsigned long)dev);
 
+	p54p_open(dev);
+	err = p54_read_eeprom(dev);
+	p54p_stop(dev);
+	if (err)
+		goto err_free_desc;
+
 	err = ieee80211_register_hw(dev);
 	if (err) {
 		printk(KERN_ERR "%s (p54pci): Cannot register netdevice\n",
@@ -673,11 +569,6 @@ static int __devinit p54p_probe(struct pci_dev *pdev,
 		goto err_free_common;
 	}
 
-	printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n",
-	       wiphy_name(dev->wiphy),
-	       print_mac(mac, dev->wiphy->perm_addr),
-	       priv->common.version);
-
 	return 0;
 
  err_free_common:

drivers/net/wireless/p54/p54usb.c

@@ -91,11 +91,16 @@ static void p54u_rx_cb(struct urb *urb)
 
 	skb_unlink(skb, &priv->rx_queue);
 	skb_put(skb, urb->actual_length);
-	if (!priv->hw_type)
-		skb_pull(skb, sizeof(struct net2280_tx_hdr));
+
+	if (priv->hw_type == P54U_NET2280)
+		skb_pull(skb, priv->common.tx_hdr_len);
+	if (priv->common.fw_interface == FW_LM87) {
+		skb_pull(skb, 4);
+		skb_put(skb, 4);
+	}
 
 	if (p54_rx(dev, skb)) {
-		skb = dev_alloc_skb(MAX_RX_SIZE);
+		skb = dev_alloc_skb(priv->common.rx_mtu + 32);
 		if (unlikely(!skb)) {
 			usb_free_urb(urb);
 			/* TODO check rx queue length and refill *somewhere* */
@@ -109,9 +114,12 @@ static void p54u_rx_cb(struct urb *urb)
 		urb->context = skb;
 		skb_queue_tail(&priv->rx_queue, skb);
 	} else {
-		if (!priv->hw_type)
-			skb_push(skb, sizeof(struct net2280_tx_hdr));
-
+		if (priv->hw_type == P54U_NET2280)
+			skb_push(skb, priv->common.tx_hdr_len);
+		if (priv->common.fw_interface == FW_LM87) {
+			skb_push(skb, 4);
+			skb_put(skb, 4);
+		}
 		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
 		if (urb->transfer_buffer != skb_tail_pointer(skb)) {
@@ -145,7 +153,7 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
 	struct p54u_rx_info *info;
 
 	while (skb_queue_len(&priv->rx_queue) < 32) {
-		skb = __dev_alloc_skb(MAX_RX_SIZE, GFP_KERNEL);
+		skb = __dev_alloc_skb(priv->common.rx_mtu + 32, GFP_KERNEL);
 		if (!skb)
 			break;
 		entry = usb_alloc_urb(0, GFP_KERNEL);
@@ -153,7 +161,10 @@ static int p54u_init_urbs(struct ieee80211_hw *dev)
 			kfree_skb(skb);
 			break;
 		}
-		usb_fill_bulk_urb(entry, priv->udev, usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA), skb_tail_pointer(skb), MAX_RX_SIZE, p54u_rx_cb, skb);
+		usb_fill_bulk_urb(entry, priv->udev,
+				  usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA),
+				  skb_tail_pointer(skb),
+				  priv->common.rx_mtu + 32, p54u_rx_cb, skb);
 		info = (struct p54u_rx_info *) skb->cb;
 		info->urb = entry;
 		info->dev = dev;
@@ -207,6 +218,42 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct p54_control_hdr *data,
 	usb_submit_urb(data_urb, GFP_ATOMIC);
 }
 
+__le32 p54u_lm87_chksum(const u32 *data, size_t length)
+{
+	__le32 chk = 0;
+
+	length >>= 2;
+	while (length--) {
+		chk ^= cpu_to_le32(*data++);
+		chk = (chk >> 5) ^ (chk << 3);
+	}
+
+	return chk;
+}
+
+static void p54u_tx_lm87(struct ieee80211_hw *dev,
+			 struct p54_control_hdr *data,
+			 size_t len, int free_on_tx)
+{
+	struct p54u_priv *priv = dev->priv;
+	struct urb *data_urb;
+	struct lm87_tx_hdr *hdr = (void *)data - sizeof(*hdr);
+
+	data_urb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!data_urb)
+		return;
+
+	hdr->chksum = p54u_lm87_chksum((u32 *)data, len);
+	hdr->device_addr = data->req_id;
+
+	usb_fill_bulk_urb(data_urb, priv->udev,
+		usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), hdr,
+		len + sizeof(*hdr), free_on_tx ? p54u_tx_free_cb : p54u_tx_cb,
+		dev);
+
+	usb_submit_urb(data_urb, GFP_ATOMIC);
+}
+
 static void p54u_tx_net2280(struct ieee80211_hw *dev, struct p54_control_hdr *data,
 			    size_t len, int free_on_tx)
 {
@@ -312,73 +359,6 @@ static int p54u_bulk_msg(struct p54u_priv *priv, unsigned int ep,
 			    data, len, &alen, 2000);
 }
 
-static int p54u_read_eeprom(struct ieee80211_hw *dev)
-{
-	struct p54u_priv *priv = dev->priv;
-	void *buf;
-	struct p54_control_hdr *hdr;
-	int err, alen;
-	size_t offset = priv->hw_type ? 0x10 : 0x20;
-
-	buf = kmalloc(0x2020, GFP_KERNEL);
-	if (!buf) {
-		printk(KERN_ERR "p54usb: cannot allocate memory for "
-		       "eeprom readback!\n");
-		return -ENOMEM;
-	}
-
-	if (priv->hw_type) {
-		*((u32 *) buf) = priv->common.rx_start;
-		err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf, sizeof(u32));
-		if (err) {
-			printk(KERN_ERR "p54usb: addr send failed\n");
-			goto fail;
-		}
-	} else {
-		struct net2280_reg_write *reg = buf;
-		reg->port = cpu_to_le16(NET2280_DEV_U32);
-		reg->addr = cpu_to_le32(P54U_DEV_BASE);
-		reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA);
-		err = p54u_bulk_msg(priv, P54U_PIPE_DEV, buf, sizeof(*reg));
-		if (err) {
-			printk(KERN_ERR "p54usb: dev_int send failed\n");
-			goto fail;
-		}
-	}
-
-	hdr = buf + priv->common.tx_hdr_len;
-	p54_fill_eeprom_readback(hdr);
-	hdr->req_id = cpu_to_le32(priv->common.rx_start);
-	if (priv->common.tx_hdr_len) {
-		struct net2280_tx_hdr *tx_hdr = buf;
-		tx_hdr->device_addr = hdr->req_id;
-		tx_hdr->len = cpu_to_le16(EEPROM_READBACK_LEN);
-	}
-
-	/* we can just pretend to send 0x2000 bytes of nothing in the headers */
-	err = p54u_bulk_msg(priv, P54U_PIPE_DATA, buf,
-			    EEPROM_READBACK_LEN + priv->common.tx_hdr_len);
-	if (err) {
-		printk(KERN_ERR "p54usb: eeprom req send failed\n");
-		goto fail;
-	}
-
-	err = usb_bulk_msg(priv->udev,
-			   usb_rcvbulkpipe(priv->udev, P54U_PIPE_DATA),
-			   buf, 0x2020, &alen, 1000);
-	if (!err && alen > offset) {
-		p54_parse_eeprom(dev, (u8 *)buf + offset, alen - offset);
-	} else {
-		printk(KERN_ERR "p54usb: eeprom read failed!\n");
-		err = -EINVAL;
-		goto fail;
-	}
-
- fail:
-	kfree(buf);
-	return err;
-}
-
 static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 {
 	static char start_string[] = "~~~~<\r";
@@ -412,7 +392,9 @@ static int p54u_upload_firmware_3887(struct ieee80211_hw *dev)
 		goto err_req_fw_failed;
 	}
 
-	p54_parse_firmware(dev, fw_entry);
+	err = p54_parse_firmware(dev, fw_entry);
+	if (err)
+		goto err_upload_failed;
 
 	left = block_size = min((size_t)P54U_FW_BLOCK, fw_entry->size);
 	strcpy(buf, start_string);
@@ -549,7 +531,12 @@ static int p54u_upload_firmware_net2280(struct ieee80211_hw *dev)
 		return err;
 	}
 
-	p54_parse_firmware(dev, fw_entry);
+	err = p54_parse_firmware(dev, fw_entry);
+	if (err) {
+		kfree(buf);
+		release_firmware(fw_entry);
+		return err;
+	}
 
 #define P54U_WRITE(type, addr, data) \
 	do {\
@@ -833,49 +820,40 @@ static int __devinit p54u_probe(struct usb_interface *intf,
 		}
 	}
 	priv->common.open = p54u_open;
-
+	priv->common.stop = p54u_stop;
 	if (recognized_pipes < P54U_PIPE_NUMBER) {
 		priv->hw_type = P54U_3887;
-		priv->common.tx = p54u_tx_3887;
+		err = p54u_upload_firmware_3887(dev);
+		if (priv->common.fw_interface == FW_LM87) {
+			dev->extra_tx_headroom += sizeof(struct lm87_tx_hdr);
+			priv->common.tx_hdr_len = sizeof(struct lm87_tx_hdr);
+			priv->common.tx = p54u_tx_lm87;
+		} else
+			priv->common.tx = p54u_tx_3887;
 	} else {
+		priv->hw_type = P54U_NET2280;
 		dev->extra_tx_headroom += sizeof(struct net2280_tx_hdr);
 		priv->common.tx_hdr_len = sizeof(struct net2280_tx_hdr);
 		priv->common.tx = p54u_tx_net2280;
-	}
-	priv->common.stop = p54u_stop;
-
-	if (priv->hw_type)
-		err = p54u_upload_firmware_3887(dev);
-	else
 		err = p54u_upload_firmware_net2280(dev);
+	}
 	if (err)
 		goto err_free_dev;
 
-	err = p54u_read_eeprom(dev);
+	skb_queue_head_init(&priv->rx_queue);
+
+	p54u_open(dev);
+	err = p54_read_eeprom(dev);
+	p54u_stop(dev);
 	if (err)
 		goto err_free_dev;
 
-	if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
-		u8 perm_addr[ETH_ALEN];
-
-		printk(KERN_WARNING "p54usb: Invalid hwaddr! Using randomly generated MAC addr\n");
-		random_ether_addr(perm_addr);
-		SET_IEEE80211_PERM_ADDR(dev, perm_addr);
-	}
-
-	skb_queue_head_init(&priv->rx_queue);
-
 	err = ieee80211_register_hw(dev);
 	if (err) {
 		printk(KERN_ERR "p54usb: Cannot register netdevice\n");
 		goto err_free_dev;
 	}
 
-	printk(KERN_INFO "%s: hwaddr %s, isl38%02x\n",
-	       wiphy_name(dev->wiphy),
-	       print_mac(mac, dev->wiphy->perm_addr),
-	       priv->common.version);
-
 	return 0;
 
  err_free_dev:

drivers/net/wireless/p54/p54usb.h

@@ -72,6 +72,11 @@ struct net2280_tx_hdr {
 	u8 padding[8];
 } __attribute__((packed));
 
+struct lm87_tx_hdr {
+	__le32 device_addr;
+	__le32 chksum;
+} __attribute__((packed));
+
 /* Some flags for the isl hardware registers controlling DMA inside the
  * chip */
 #define ISL38XX_DMA_STATUS_DONE			0x00000001

drivers/net/wireless/rt2x00/rt2x00dev.c

@@ -1052,6 +1052,11 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
 
+	rt2x00dev->hw->wiphy->interface_modes =
+	    BIT(NL80211_IFTYPE_AP) |
+	    BIT(NL80211_IFTYPE_STATION) |
+	    BIT(NL80211_IFTYPE_ADHOC);
+
 	/*
 	 * Let the driver probe the device to detect the capabilities.
 	 */

drivers/net/wireless/rtl8187_dev.c

@@ -1184,6 +1184,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
 		dev->max_signal = 65;
 	}
 
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
 	if ((id->driver_info == DEVICE_RTL8187) && priv->is_rtl8187b)
 		printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
 		       " info!\n");

drivers/net/wireless/zd1211rw/zd_mac.c

@@ -937,6 +937,11 @@ struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf)
 	hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
 		    IEEE80211_HW_SIGNAL_DB;
 
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_MESH_POINT) |
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
+
 	hw->max_signal = 100;
 	hw->queues = 1;
 	hw->extra_tx_headroom = sizeof(struct zd_ctrlset);

include/linux/nl80211.h

@@ -210,6 +210,10 @@ enum nl80211_commands {
  * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from
  *	association request when used with NL80211_CMD_NEW_STATION)
  *
+ * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all
+ *	supported interface types, each a flag attribute with the number
+ *	of the interface mode.
+ *
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
  */
@@ -259,6 +263,8 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_HT_CAPABILITY,
 
+	NL80211_ATTR_SUPPORTED_IFTYPES,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,

include/net/wireless.h

@@ -185,6 +185,9 @@ struct wiphy {
 	/* permanent MAC address */
 	u8 perm_addr[ETH_ALEN];
 
+	/* Supported interface modes, OR together BIT(NL80211_IFTYPE_...) */
+	u16 interface_modes;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered

net/mac80211/main.c

@@ -1675,6 +1675,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
 		}
 	}
 
+	/* if low-level driver supports AP, we also support VLAN */
+	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP))
+		local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
+
+	/* mac80211 always supports monitor */
+	local->hw.wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
+
 	result = wiphy_register(local->hw.wiphy);
 	if (result < 0)
 		return result;

net/mac80211/mlme.c

@@ -2557,6 +2557,33 @@ u64 ieee80211_sta_get_rates(struct ieee80211_local *local,
 	return supp_rates;
 }
 
+static u64 ieee80211_sta_get_mandatory_rates(struct ieee80211_local *local,
+					enum ieee80211_band band)
+{
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_rate *bitrates;
+	u64 mandatory_rates;
+	enum ieee80211_rate_flags mandatory_flag;
+	int i;
+
+	sband = local->hw.wiphy->bands[band];
+	if (!sband) {
+		WARN_ON(1);
+		sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+	}
+
+	if (band == IEEE80211_BAND_2GHZ)
+		mandatory_flag = IEEE80211_RATE_MANDATORY_B;
+	else
+		mandatory_flag = IEEE80211_RATE_MANDATORY_A;
+
+	bitrates = sband->bitrates;
+	mandatory_rates = 0;
+	for (i = 0; i < sband->n_bitrates; i++)
+		if (bitrates[i].flags & mandatory_flag)
+			mandatory_rates |= BIT(i);
+	return mandatory_rates;
+}
 
 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 				  struct ieee80211_mgmt *mgmt,
@@ -2568,9 +2595,11 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 	int freq, clen;
 	struct ieee80211_sta_bss *bss;
 	struct sta_info *sta;
-	u64 beacon_timestamp, rx_timestamp;
 	struct ieee80211_channel *channel;
+	u64 beacon_timestamp, rx_timestamp;
+	u64 supp_rates = 0;
 	bool beacon = ieee80211_is_beacon(mgmt->frame_control);
+	enum ieee80211_band band = rx_status->band;
 	DECLARE_MAC_BUF(mac);
 	DECLARE_MAC_BUF(mac2);
 
@@ -2578,30 +2607,41 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 
 	if (ieee80211_vif_is_mesh(&sdata->vif) && elems->mesh_id &&
 	    elems->mesh_config && mesh_matches_local(elems, sdata)) {
-		u64 rates = ieee80211_sta_get_rates(local, elems,
-						rx_status->band);
+		supp_rates = ieee80211_sta_get_rates(local, elems, band);
 
-		mesh_neighbour_update(mgmt->sa, rates, sdata,
+		mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
 				      mesh_peer_accepts_plinks(elems));
 	}
 
 	rcu_read_lock();
 
 	if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && elems->supp_rates &&
-	    memcmp(mgmt->bssid, sdata->u.sta.bssid, ETH_ALEN) == 0 &&
-	    (sta = sta_info_get(local, mgmt->sa))) {
-		u64 prev_rates;
-		u64 supp_rates = ieee80211_sta_get_rates(local, elems,
-							rx_status->band);
-
-		prev_rates = sta->supp_rates[rx_status->band];
-		sta->supp_rates[rx_status->band] &= supp_rates;
-		if (sta->supp_rates[rx_status->band] == 0) {
-			/* No matching rates - this should not really happen.
-			 * Make sure that at least one rate is marked
-			 * supported to avoid issues with TX rate ctrl. */
-			sta->supp_rates[rx_status->band] =
-				sdata->u.sta.supp_rates_bits[rx_status->band];
+	    memcmp(mgmt->bssid, sdata->u.sta.bssid, ETH_ALEN) == 0) {
+
+		supp_rates = ieee80211_sta_get_rates(local, elems, band);
+
+		sta = sta_info_get(local, mgmt->sa);
+		if (sta) {
+			u64 prev_rates;
+
+			prev_rates = sta->supp_rates[band];
+			/* make sure mandatory rates are always added */
+			sta->supp_rates[band] = supp_rates |
+				ieee80211_sta_get_mandatory_rates(local, band);
+
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
+			if (sta->supp_rates[band] != prev_rates)
+				printk(KERN_DEBUG "%s: updated supp_rates set "
+				    "for %s based on beacon info (0x%llx | "
+				    "0x%llx -> 0x%llx)\n",
+				    sdata->dev->name, print_mac(mac, sta->addr),
+				    (unsigned long long) prev_rates,
+				    (unsigned long long) supp_rates,
+				    (unsigned long long) sta->supp_rates[band]);
+#endif
+		} else {
+			ieee80211_ibss_add_sta(sdata, NULL, mgmt->bssid,
+					       mgmt->sa, supp_rates);
 		}
 	}
 
@@ -2683,7 +2723,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 		bss->supp_rates_len += clen;
 	}
 
-	bss->band = rx_status->band;
+	bss->band = band;
 
 	bss->timestamp = beacon_timestamp;
 	bss->last_update = jiffies;
@@ -2738,7 +2778,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 			 * e.g: at 1 MBit that means mactime is 192 usec earlier
 			 * (=24 bytes * 8 usecs/byte) than the beacon timestamp.
 			 */
-			int rate = local->hw.wiphy->bands[rx_status->band]->
+			int rate = local->hw.wiphy->bands[band]->
 					bitrates[rx_status->rate_idx].bitrate;
 			rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate);
 		} else if (local && local->ops && local->ops->get_tsf)
@@ -2766,7 +2806,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
 			ieee80211_sta_join_ibss(sdata, &sdata->u.sta, bss);
 			ieee80211_ibss_add_sta(sdata, NULL,
 					       mgmt->bssid, mgmt->sa,
-					       BIT(rx_status->rate_idx));
+					       supp_rates);
 		}
 	}
 
@@ -3032,7 +3072,6 @@ void ieee80211_sta_rx_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *
 	kfree_skb(skb);
 }
 
-
 static void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
 					 struct sk_buff *skb)
 {
@@ -4316,10 +4355,9 @@ struct sta_info *ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata,
 
 	set_sta_flags(sta, WLAN_STA_AUTHORIZED);
 
-	if (supp_rates)
-		sta->supp_rates[band] = supp_rates;
-	else
-		sta->supp_rates[band] = sdata->u.sta.supp_rates_bits[band];
+	/* make sure mandatory rates are always added */
+	sta->supp_rates[band] = supp_rates |
+			ieee80211_sta_get_mandatory_rates(local, band);
 
 	rate_control_rate_init(sta, local);
 

net/mac80211/rx.c

@@ -1743,10 +1743,6 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata,
 		if (!bssid)
 			return 0;
 		if (ieee80211_is_beacon(hdr->frame_control)) {
-			if (!rx->sta)
-				rx->sta = ieee80211_ibss_add_sta(sdata,
-						rx->skb, bssid, hdr->addr2,
-						BIT(rx->status->rate_idx));
 			return 1;
 		}
 		else if (!ieee80211_bssid_match(bssid, sdata->u.sta.bssid)) {

net/mac80211/sta_info.h

@@ -204,6 +204,7 @@ struct sta_ampdu_mlme {
  * @tx_fragments: number of transmitted MPDUs
  * @txrate_idx: TBD
  * @last_txrate_idx: TBD
+ * @tid_seq: TBD
  * @wme_tx_queue: TBD
  * @ampdu_mlme: TBD
  * @timer_to_tid: identity mapping to ID timers

net/wireless/core.c

@@ -1,7 +1,7 @@
 /*
  * This is the linux wireless configuration interface.
  *
- * Copyright 2006, 2007		Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2006-2008		Johannes Berg <johannes@sipsolutions.net>
  */
 
 #include <linux/if.h>
@@ -259,6 +259,13 @@ int wiphy_register(struct wiphy *wiphy)
 	struct ieee80211_supported_band *sband;
 	bool have_band = false;
 	int i;
+	u16 ifmodes = wiphy->interface_modes;
+
+	/* sanity check ifmodes */
+	WARN_ON(!ifmodes);
+	ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1;
+	if (WARN_ON(ifmodes != wiphy->interface_modes))
+		wiphy->interface_modes = ifmodes;
 
 	/* sanity check supported bands/channels */
 	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {

net/wireless/nl80211.c

@@ -113,10 +113,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	struct nlattr *nl_bands, *nl_band;
 	struct nlattr *nl_freqs, *nl_freq;
 	struct nlattr *nl_rates, *nl_rate;
+	struct nlattr *nl_modes;
 	enum ieee80211_band band;
 	struct ieee80211_channel *chan;
 	struct ieee80211_rate *rate;
 	int i;
+	u16 ifmodes = dev->wiphy.interface_modes;
 
 	hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_WIPHY);
 	if (!hdr)
@@ -125,6 +127,20 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->idx);
 	NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
 
+	nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
+	if (!nl_modes)
+		goto nla_put_failure;
+
+	i = 0;
+	while (ifmodes) {
+		if (ifmodes & 1)
+			NLA_PUT_FLAG(msg, i);
+		ifmodes >>= 1;
+		i++;
+	}
+
+	nla_nest_end(msg, nl_modes);
+
 	nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
 	if (!nl_bands)
 		goto nla_put_failure;
@@ -415,7 +431,8 @@ static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
 	ifindex = dev->ifindex;
 	dev_put(dev);
 
-	if (!drv->ops->change_virtual_intf) {
+	if (!drv->ops->change_virtual_intf ||
+	    !(drv->wiphy.interface_modes & (1 << type))) {
 		err = -EOPNOTSUPP;
 		goto unlock;
 	}
@@ -462,7 +479,8 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
 	if (IS_ERR(drv))
 		return PTR_ERR(drv);
 
-	if (!drv->ops->add_virtual_intf) {
+	if (!drv->ops->add_virtual_intf ||
+	    !(drv->wiphy.interface_modes & (1 << type))) {
 		err = -EOPNOTSUPP;
 		goto unlock;
 	}