Merge branch 'devel-stable' into devel

arch/arm/Kconfig

@@ -727,9 +727,11 @@ config ARCH_S5PC100
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
 	select CPU_V7
+	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select ARM_L1_CACHE_SHIFT_6
+	select ARCH_HAS_CPUFREQ
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C
 	select HAVE_S3C_RTC
@@ -740,9 +742,13 @@ config ARCH_S5PV210
 config ARCH_S5PV310
 	bool "Samsung S5PV310/S5PC210"
 	select CPU_V7
+	select ARCH_SPARSEMEM_ENABLE
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select GENERIC_CLOCKEVENTS
+	select HAVE_S3C_RTC
+	select HAVE_S3C2410_I2C
+	select HAVE_S3C2410_WATCHDOG
 	help
 	  Samsung S5PV310 series based systems
 
@@ -1669,6 +1675,12 @@ if ARCH_HAS_CPUFREQ
 
 source "drivers/cpufreq/Kconfig"
 
+config CPU_FREQ_IMX
+	tristate "CPUfreq driver for i.MX CPUs"
+	depends on ARCH_MXC && CPU_FREQ
+	help
+	  This enables the CPUfreq driver for i.MX CPUs.
+
 config CPU_FREQ_SA1100
 	bool
 

arch/arm/configs/mx51_defconfig

@@ -82,6 +82,7 @@ CONFIG_FEC=y
 CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_INPUT_EVBUG=m
 CONFIG_MOUSE_PS2=m
 CONFIG_MOUSE_PS2_ELANTECH=y

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -21,9 +21,6 @@
 #define __ASM_ARM_HARDWARE_L2X0_H
 
 #define L2X0_CACHE_ID			0x000
-#define   L2X0_CACHE_ID_PART_MASK	(0xf << 6)
-#define   L2X0_CACHE_ID_PART_L210	(1 << 6)
-#define   L2X0_CACHE_ID_PART_L310	(3 << 6)
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100
 #define L2X0_AUX_CTRL			0x104
@@ -53,6 +50,16 @@
 #define L2X0_LINE_DATA			0xF10
 #define L2X0_LINE_TAG			0xF30
 #define L2X0_DEBUG_CTRL			0xF40
+#define L2X0_PREFETCH_CTRL		0xF60
+#define L2X0_POWER_CTRL			0xF80
+#define   L2X0_DYNAMIC_CLK_GATING_EN	(1 << 1)
+#define   L2X0_STNDBY_MODE_EN		(1 << 0)
+
+/* Registers shifts and masks */
+#define L2X0_CACHE_ID_PART_MASK		(0xf << 6)
+#define L2X0_CACHE_ID_PART_L210		(1 << 6)
+#define L2X0_CACHE_ID_PART_L310		(3 << 6)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK	(0x3 << 17)
 
 #ifndef __ASSEMBLY__
 extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);

arch/arm/include/asm/outercache.h

@@ -25,6 +25,9 @@ struct outer_cache_fns {
 	void (*inv_range)(unsigned long, unsigned long);
 	void (*clean_range)(unsigned long, unsigned long);
 	void (*flush_range)(unsigned long, unsigned long);
+	void (*flush_all)(void);
+	void (*inv_all)(void);
+	void (*disable)(void);
 #ifdef CONFIG_OUTER_CACHE_SYNC
 	void (*sync)(void);
 #endif
@@ -50,6 +53,24 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
 		outer_cache.flush_range(start, end);
 }
 
+static inline void outer_flush_all(void)
+{
+	if (outer_cache.flush_all)
+		outer_cache.flush_all();
+}
+
+static inline void outer_inv_all(void)
+{
+	if (outer_cache.inv_all)
+		outer_cache.inv_all();
+}
+
+static inline void outer_disable(void)
+{
+	if (outer_cache.disable)
+		outer_cache.disable();
+}
+
 #else
 
 static inline void outer_inv_range(unsigned long start, unsigned long end)
@@ -58,6 +79,9 @@ static inline void outer_clean_range(unsigned long start, unsigned long end)
 { }
 static inline void outer_flush_range(unsigned long start, unsigned long end)
 { }
+static inline void outer_flush_all(void) { }
+static inline void outer_inv_all(void) { }
+static inline void outer_disable(void) { }
 
 #endif
 

arch/arm/kernel/machine_kexec.c

@@ -78,7 +78,10 @@ void machine_kexec(struct kimage *image)
 	local_fiq_disable();
 	setup_mm_for_reboot(0); /* mode is not used, so just pass 0*/
 	flush_cache_all();
+	outer_flush_all();
+	outer_disable();
 	cpu_proc_fin();
+	outer_inv_all();
 	flush_cache_all();
 	cpu_reset(reboot_code_buffer_phys);
 }

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -23,16 +23,20 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx27.h>
+#include <mach/mmc.h>
 
 #include "devices-imx27.h"
 #include "devices.h"
 
+#define SD1_EN_GPIO (GPIO_PORTB + 25)
+
 static const int mx27pdk_pins[] __initconst = {
 	/* UART1 */
 	PE12_PF_UART1_TXD,
@@ -58,6 +62,14 @@ static const int mx27pdk_pins[] __initconst = {
 	PD15_AOUT_FEC_COL,
 	PD16_AIN_FEC_TX_ER,
 	PF23_AIN_FEC_TX_EN,
+	/* SDHC1 */
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	SD1_EN_GPIO | GPIO_GPIO | GPIO_OUT,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -85,13 +97,39 @@ static struct matrix_keymap_data mx27_3ds_keymap_data = {
 	.keymap_size	= ARRAY_SIZE(mx27_3ds_keymap),
 };
 
+static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
+			IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+}
+
+static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOB(26), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mx27_3ds_sdhc1_init,
+	.exit = mx27_3ds_sdhc1_exit,
+};
+
+static void mx27_3ds_sdhc1_enable_level_translator(void)
+{
+	/* Turn on TXB0108 OE pin */
+	gpio_request(SD1_EN_GPIO, "sd1_enable");
+	gpio_direction_output(SD1_EN_GPIO, 1);
+}
+
 static void __init mx27pdk_init(void)
 {
 	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
 		"mx27pdk");
+	mx27_3ds_sdhc1_enable_level_translator();
 	imx27_add_imx_uart0(&uart_pdata);
 	imx27_add_fec(NULL);
 	mxc_register_device(&imx_kpp_device, &mx27_3ds_keymap_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
 }
 
 static void __init mx27pdk_timer_init(void)

arch/arm/mach-mx25/Kconfig

@@ -6,6 +6,7 @@ config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_ESDHC
 
 config MACH_EUKREA_CPUIMX25
 	bool "Support Eukrea CPUIMX25 Platform"

arch/arm/mach-mx25/mach-mx25_3ds.c

@@ -96,6 +96,14 @@ static struct pad_desc mx25pdk_pads[] = {
 	MX25_PAD_KPP_COL1__KPP_COL1,
 	MX25_PAD_KPP_COL2__KPP_COL2,
 	MX25_PAD_KPP_COL3__KPP_COL3,
+
+	/* SD1 */
+	MX25_PAD_SD1_CMD__SD1_CMD,
+	MX25_PAD_SD1_CLK__SD1_CLK,
+	MX25_PAD_SD1_DATA0__SD1_DATA0,
+	MX25_PAD_SD1_DATA1__SD1_DATA1,
+	MX25_PAD_SD1_DATA2__SD1_DATA2,
+	MX25_PAD_SD1_DATA3__SD1_DATA3,
 };
 
 static const struct fec_platform_data mx25_fec_pdata __initconst = {
@@ -193,6 +201,8 @@ static void __init mx25pdk_init(void)
 	mx25pdk_fec_reset();
 	imx25_add_fec(&mx25_fec_pdata);
 	mxc_register_device(&mx25_kpp_device, &mx25pdk_keymap_data);
+
+	imx25_add_esdhc(0, NULL);
 }
 
 static void __init mx25pdk_timer_init(void)

arch/arm/mach-mx3/Kconfig

@@ -143,8 +143,10 @@ config MACH_ARMADILLO5X0
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
 	select ARCH_MX35
+	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_ESDHC
 	default n
 	help
 	  Include support for MX35PDK platform. This includes specific

arch/arm/mach-mx3/devices.c

@@ -72,24 +72,24 @@ struct platform_device mxc_w1_master_device = {
 #ifdef CONFIG_ARCH_MX31
 static struct resource mxcsdhc0_resources[] = {
 	{
-		.start = MMC_SDHC1_BASE_ADDR,
-		.end = MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
+		.start = MX31_MMC_SDHC1_BASE_ADDR,
+		.end = MX31_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_MMC_SDHC1,
-		.end = MXC_INT_MMC_SDHC1,
+		.start = MX31_INT_MMC_SDHC1,
+		.end = MX31_INT_MMC_SDHC1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
 
 static struct resource mxcsdhc1_resources[] = {
 	{
-		.start = MMC_SDHC2_BASE_ADDR,
-		.end = MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
+		.start = MX31_MMC_SDHC2_BASE_ADDR,
+		.end = MX31_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
 	}, {
-		.start = MXC_INT_MMC_SDHC2,
-		.end = MXC_INT_MMC_SDHC2,
+		.start = MX31_INT_MMC_SDHC2,
+		.end = MX31_INT_MMC_SDHC2,
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -38,39 +38,9 @@
 #include "devices-imx31.h"
 #include "devices.h"
 
-/* Definitions for components on the Debug board */
-
-/* Base address of CPLD controller on the Debug board */
-#define DEBUG_BASE_ADDRESS		CS5_IO_ADDRESS(MX3x_CS5_BASE_ADDR)
-
-/* LAN9217 ethernet base address */
-#define LAN9217_BASE_ADDR		MX3x_CS5_BASE_ADDR
-
-/* CPLD config and interrupt base address */
-#define CPLD_ADDR			(DEBUG_BASE_ADDRESS + 0x20000)
-
-/* status, interrupt */
-#define CPLD_INT_STATUS_REG		(CPLD_ADDR + 0x10)
-#define CPLD_INT_MASK_REG		(CPLD_ADDR + 0x38)
-#define CPLD_INT_RESET_REG		(CPLD_ADDR + 0x20)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER1_REG		(CPLD_ADDR + 0x40)
-#define CPLD_MAGIC_NUMBER2_REG		(CPLD_ADDR + 0x48)
-/* CPLD code version */
-#define CPLD_CODE_VER_REG		(CPLD_ADDR + 0x50)
-/* magic word for debug CPLD */
-#define CPLD_MAGIC_NUMBER3_REG		(CPLD_ADDR + 0x58)
-
 /* CPLD IRQ line for external uart, external ethernet etc */
 #define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
 
-#define MXC_EXP_IO_BASE		(MXC_BOARD_IRQ_START)
-#define MXC_IRQ_TO_EXPIO(irq)	((irq) - MXC_EXP_IO_BASE)
-
-#define EXPIO_INT_ENET		(MXC_EXP_IO_BASE + 0)
-
-#define MXC_MAX_EXP_IO_LINES	16
-
 /*
  * This file contains the board-specific initialization routines.
  */
@@ -272,7 +242,7 @@ static void __init mxc_board_init(void)
 	imx31_add_imx_uart0(&uart_pdata);
 	imx31_add_mxc_nand(&mx31_3ds_nand_board_info);
 
-	imx31_add_spi_imx0(&spi1_pdata);
+	imx31_add_spi_imx1(&spi1_pdata);
 	spi_register_board_info(mx31_3ds_spi_devs,
 						ARRAY_SIZE(mx31_3ds_spi_devs));
 
@@ -281,9 +251,9 @@ static void __init mxc_board_init(void)
 	mx31_3ds_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usbotg_pdata);
 
-	if (!mxc_expio_init(CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		printk(KERN_WARNING "Init of the debugboard failed, all "
-				    "devices on the board are unusable.\n");
+	if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		printk(KERN_WARNING "Init of the debug board failed, all "
+				    "devices on the debug board are unusable.\n");
 }
 
 static void __init mx31_3ds_timer_init(void)

arch/arm/mach-mx3/mach-mx35_3ds.c

@@ -38,11 +38,15 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/iomux-mx35.h>
+#include <mach/irqs.h>
+#include <mach/3ds_debugboard.h>
 #include <mach/mxc_ehci.h>
 
 #include "devices-imx35.h"
 #include "devices.h"
 
+#define EXPIO_PARENT_INT	(MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+
 static const struct imxuart_platform_data uart_pdata __initconst = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
@@ -108,6 +112,13 @@ static struct pad_desc mx35pdk_pads[] = {
 	/* USBH1 */
 	MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR,
 	MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC,
+	/* SDCARD */
+	MX35_PAD_SD1_CMD__ESDHC1_CMD,
+	MX35_PAD_SD1_CLK__ESDHC1_CLK,
+	MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
+	MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
+	MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
+	MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
 };
 
 /* OTG config */
@@ -140,6 +151,11 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_usbh1, &usb_host_pdata);
 
 	imx35_add_mxc_nand(&mx35pdk_nand_board_info);
+	imx35_add_esdhc(0, NULL);
+
+	if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT))
+		pr_warn("Init of the debugboard failed, all "
+				"devices on the debugboard are unusable.\n");
 }
 
 static void __init mx35pdk_timer_init(void)

arch/arm/mach-mx5/Kconfig

@@ -6,6 +6,7 @@ config ARCH_MX51
 	select MXC_TZIC
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
 
 comment "MX5 platforms:"
 
@@ -13,6 +14,7 @@ config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_ESDHC
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its

arch/arm/mach-mx5/Makefile

@@ -5,6 +5,7 @@
 # Object file lists.
 obj-y   := cpu.o mm.o clock-mx51.o devices.o
 
+obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
 obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
 obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
  * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
  *
  * The code contained herein is licensed under the GNU General Public
@@ -18,6 +18,8 @@
 #include <linux/io.h>
 #include <linux/fsl_devices.h>
 #include <linux/fec.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 
 #include <mach/common.h>
 #include <mach/hardware.h>
@@ -32,11 +34,13 @@
 
 #include "devices-imx51.h"
 #include "devices.h"
+#include "cpu_op-mx51.h"
 
 #define BABBAGE_USB_HUB_RESET	(0*32 + 7)	/* GPIO_1_7 */
 #define BABBAGE_USBH1_STP	(0*32 + 27)	/* GPIO_1_27 */
 #define BABBAGE_PHY_RESET	(1*32 + 5)	/* GPIO_2_5 */
 #define BABBAGE_FEC_PHY_RESET	(1*32 + 14)	/* GPIO_2_14 */
+#define BABBAGE_POWER_KEY	(1*32 + 21)	/* GPIO_2_21 */
 
 /* USB_CTRL_1 */
 #define MX51_USB_CTRL_1_OFFSET			0x10
@@ -46,6 +50,21 @@
 #define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
 #define	MX51_USB_PLL_DIV_24_MHZ	0x02
 
+static struct gpio_keys_button babbage_buttons[] = {
+	{
+		.gpio		= BABBAGE_POWER_KEY,
+		.code		= BTN_0,
+		.desc		= "PWR",
+		.active_low	= 1,
+		.wakeup		= 1,
+	},
+};
+
+static const struct gpio_keys_platform_data imx_button_data __initconst = {
+	.buttons	= babbage_buttons,
+	.nbuttons	= ARRAY_SIZE(babbage_buttons),
+};
+
 static struct pad_desc mx51babbage_pads[] = {
 	/* UART1 */
 	MX51_PAD_UART1_RXD__UART1_RXD,
@@ -112,6 +131,22 @@ static struct pad_desc mx51babbage_pads[] = {
 
 	/* FEC PHY reset line */
 	MX51_PAD_EIM_A20__GPIO_2_14,
+
+	/* SD 1 */
+	MX51_PAD_SD1_CMD__SD1_CMD,
+	MX51_PAD_SD1_CLK__SD1_CLK,
+	MX51_PAD_SD1_DATA0__SD1_DATA0,
+	MX51_PAD_SD1_DATA1__SD1_DATA1,
+	MX51_PAD_SD1_DATA2__SD1_DATA2,
+	MX51_PAD_SD1_DATA3__SD1_DATA3,
+
+	/* SD 2 */
+	MX51_PAD_SD2_CMD__SD2_CMD,
+	MX51_PAD_SD2_CLK__SD2_CLK,
+	MX51_PAD_SD2_DATA0__SD2_DATA0,
+	MX51_PAD_SD2_DATA1__SD2_DATA1,
+	MX51_PAD_SD2_DATA2__SD2_DATA2,
+	MX51_PAD_SD2_DATA3__SD2_DATA3,
 };
 
 /* Serial ports */
@@ -281,13 +316,22 @@ __setup("otg_mode=", babbage_otg_mode);
 static void __init mxc_board_init(void)
 {
 	struct pad_desc usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
+	struct pad_desc power_key = MX51_PAD_EIM_A27__GPIO_2_21;
 
+#if defined(CONFIG_CPU_FREQ_IMX)
+	get_cpu_op = mx51_get_cpu_op;
+#endif
 	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
 					ARRAY_SIZE(mx51babbage_pads));
 	mxc_init_imx_uart();
 	babbage_fec_reset();
 	imx51_add_fec(NULL);
 
+	/* Set the PAD settings for the pwr key. */
+	power_key.pad_ctrl = MX51_GPIO_PAD_CTRL_2;
+	mxc_iomux_v3_setup_pad(&power_key);
+	imx51_add_gpio_keys(&imx_button_data);
+
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
 	imx51_add_imx_i2c(1, &babbage_i2c_data);
 	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
@@ -304,6 +348,9 @@ static void __init mxc_board_init(void)
 	/* setback USBH1_STP to be function */
 	mxc_iomux_v3_setup_pad(&usbh1stp);
 	babbage_usbhub_reset();
+
+	imx51_add_esdhc(0, NULL);
+	imx51_add_esdhc(1, NULL);
 }
 
 static void __init mx51_babbage_timer_init(void)

arch/arm/mach-mx5/clock-mx51.c

@@ -362,7 +362,7 @@ static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
 	return 0;
 }
 
-static unsigned long clk_arm_get_rate(struct clk *clk)
+static unsigned long clk_cpu_get_rate(struct clk *clk)
 {
 	u32 cacrr, div;
 	unsigned long parent_rate;
@@ -374,6 +374,22 @@ static unsigned long clk_arm_get_rate(struct clk *clk)
 	return parent_rate / div;
 }
 
+static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 reg, cpu_podf;
+	unsigned long parent_rate;
+
+	parent_rate = clk_get_rate(clk->parent);
+	cpu_podf = parent_rate / rate - 1;
+	/* use post divider to change freq */
+	reg = __raw_readl(MXC_CCM_CACRR);
+	reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
+	reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
+	__raw_writel(reg, MXC_CCM_CACRR);
+
+	return 0;
+}
+
 static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
 {
 	u32 reg, mux;
@@ -736,7 +752,8 @@ static struct clk periph_apm_clk = {
 
 static struct clk cpu_clk = {
 	.parent = &pll1_sw_clk,
-	.get_rate = clk_arm_get_rate,
+	.get_rate = clk_cpu_get_rate,
+	.set_rate = clk_cpu_set_rate,
 };
 
 static struct clk ahb_clk = {
@@ -1064,6 +1081,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk)
 	_REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk)
+	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
 };
 
 static void clk_tree_init(void)

arch/arm/mach-mx5/cpu_op-mx51.c

@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/types.h>
+#include <mach/hardware.h>
+#include <linux/kernel.h>
+
+static struct cpu_op mx51_cpu_op[] = {
+	{
+	.cpu_rate = 160000000,},
+	{
+	.cpu_rate = 800000000,},
+};
+
+struct cpu_op *mx51_get_cpu_op(int *op)
+{
+	*op = ARRAY_SIZE(mx51_cpu_op);
+	return mx51_cpu_op;
+}

arch/arm/mach-mx5/cpu_op-mx51.h

@@ -0,0 +1,14 @@
+/*
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+extern struct cpu_op *mx51_get_cpu_op(int *op);

arch/arm/mach-mx5/devices-imx51.h

@@ -13,6 +13,8 @@ extern const struct imx_fec_data imx51_fec_data __initconst;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
+#define imx51_add_gpio_keys(pdata) imx_add_gpio_keys(pdata)
+
 extern const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst;
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)

arch/arm/mach-omap2/omap4-common.c

@@ -44,6 +44,13 @@ void __init gic_init_irq(void)
 }
 
 #ifdef CONFIG_CACHE_L2X0
+
+static void omap4_l2x0_disable(void)
+{
+	/* Disable PL310 L2 Cache controller */
+	omap_smc1(0x102, 0x0);
+}
+
 static int __init omap_l2_cache_init(void)
 {
 	/*
@@ -70,6 +77,12 @@ static int __init omap_l2_cache_init(void)
 	else
 		l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
 
+	/*
+	 * Override default outer_cache.disable with a OMAP4
+	 * specific one
+	*/
+	outer_cache.disable = omap4_l2x0_disable;
+
 	return 0;
 }
 early_initcall(omap_l2_cache_init);

arch/arm/mach-s3c2410/include/mach/gpio.h

@@ -22,6 +22,8 @@
 
 #ifdef CONFIG_CPU_S3C244X
 #define ARCH_NR_GPIOS	(32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define ARCH_NR_GPIOS	(32 * 12 + CONFIG_S3C24XX_GPIO_EXTRA)
 #else
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
 #endif
@@ -30,8 +32,10 @@
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
 
-#ifdef CONFIG_CPU_S3C24XX
-#define S3C_GPIO_END	(S3C2410_GPIO_BANKJ + 32)
+#ifdef CONFIG_CPU_S3C244X
+#define S3C_GPIO_END	(S3C2410_GPJ(0) + 32)
+#elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#define S3C_GPIO_END	(S3C2410_GPM(0) + 32)
 #else
-#define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END	(S3C2410_GPH(0) + 32)
 #endif

arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h

@@ -118,6 +118,8 @@
 #define S3C2443_SCLKCON_UARTCLK		(1<<8)
 #define S3C2443_SCLKCON_USBHOST		(1<<1)
 
+#define S3C2443_PWRCFG_SLEEP		(1<<15)
+
 #include <asm/div64.h>
 
 static inline unsigned int

arch/arm/mach-s3c2410/include/mach/vmalloc.h

@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	0xE0000000UL
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s3c2412/s3c2412.c

@@ -51,6 +51,7 @@
 #include <plat/clock.h>
 #include <plat/pm.h>
 #include <plat/pll.h>
+#include <plat/nand-core.h>
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -92,7 +93,7 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	/* rename devices that are s3c2412/s3c2413 specific */
 	s3c_device_sdi.name  = "s3c2412-sdi";
 	s3c_device_lcd.name  = "s3c2412-lcd";
-	s3c_device_nand.name = "s3c2412-nand";
+	s3c_nand_setname("s3c2412-nand");
 
 	/* alter IRQ of SDI controller */
 

arch/arm/mach-s3c2416/Kconfig

@@ -25,6 +25,11 @@ config S3C2416_DMA
 	help
 	  Internal config node for S3C2416 DMA support
 
+config S3C2416_PM
+	bool
+	help
+	  Internal config node to apply S3C2416 power management
+
 menu "S3C2416 Machines"
 
 config MACH_SMDK2416
@@ -33,6 +38,7 @@ config MACH_SMDK2416
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
+	select S3C2416_PM if PM
 	help
 	  Say Y here if you are using an SMDK2416
 

arch/arm/mach-s3c2416/Makefile

@@ -11,7 +11,7 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock.o
 obj-$(CONFIG_CPU_S3C2416)	+= irq.o
-
+obj-$(CONFIG_S3C2416_PM)	+= pm.o
 #obj-$(CONFIG_S3C2416_DMA)	+= dma.o
 
 # Machine support

arch/arm/mach-s3c2416/irq.c

@@ -243,6 +243,8 @@ static int __init s3c2416_irq_add(struct sys_device *sysdev)
 
 static struct sysdev_driver s3c2416_irq_driver = {
 	.add		= s3c2416_irq_add,
+	.suspend	= s3c24xx_irq_suspend,
+	.resume		= s3c24xx_irq_resume,
 };
 
 static int __init s3c2416_irq_init(void)

arch/arm/mach-s3c2416/pm.c

@@ -0,0 +1,84 @@
+/* linux/arch/arm/mach-s3c2416/pm.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * S3C2416 - PM support (Based on Ben Dooks' S3C2412 PM support)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/sysdev.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/regs-power.h>
+#include <mach/regs-s3c2443-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+extern void s3c2412_sleep_enter(void);
+
+static void s3c2416_cpu_suspend(void)
+{
+	flush_cache_all();
+
+	/* enable wakeup sources regardless of battery state */
+	__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
+
+	/* set the mode as sleep, 2BED represents "Go to BED" */
+	__raw_writel(0x2BED, S3C2443_PWRMODE);
+
+	s3c2412_sleep_enter();
+}
+
+static void s3c2416_pm_prepare(void)
+{
+	/*
+	 * write the magic value u-boot uses to check for resume into
+	 * the INFORM0 register, and ensure INFORM1 is set to the
+	 * correct address to resume from.
+	 */
+	__raw_writel(0x2BED, S3C2412_INFORM0);
+	__raw_writel(virt_to_phys(s3c_cpu_resume), S3C2412_INFORM1);
+}
+
+static int s3c2416_pm_add(struct sys_device *sysdev)
+{
+	pm_cpu_prep = s3c2416_pm_prepare;
+	pm_cpu_sleep = s3c2416_cpu_suspend;
+
+	return 0;
+}
+
+static int s3c2416_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+	return 0;
+}
+
+static int s3c2416_pm_resume(struct sys_device *dev)
+{
+	/* unset the return-from-sleep amd inform flags */
+	__raw_writel(0x0, S3C2443_PWRMODE);
+	__raw_writel(0x0, S3C2412_INFORM0);
+	__raw_writel(0x0, S3C2412_INFORM1);
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2416_pm_driver = {
+	.add		= s3c2416_pm_add,
+	.suspend	= s3c2416_pm_suspend,
+	.resume		= s3c2416_pm_resume,
+};
+
+static __init int s3c2416_pm_init(void)
+{
+	return sysdev_driver_register(&s3c2416_sysclass, &s3c2416_pm_driver);
+}
+
+arch_initcall(s3c2416_pm_init);

arch/arm/mach-s3c2416/s3c2416.c

@@ -56,6 +56,7 @@
 
 #include <plat/iic-core.h>
 #include <plat/fb-core.h>
+#include <plat/nand-core.h>
 
 static struct map_desc s3c2416_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -100,7 +101,7 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 {
 	s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no);
 
-	s3c_device_nand.name = "s3c2416-nand";
+	s3c_nand_setname("s3c2412-nand");
 }
 
 /* s3c2416_map_io

arch/arm/mach-s3c2440/s3c244x.c

@@ -44,6 +44,7 @@
 #include <plat/cpu.h>
 #include <plat/pm.h>
 #include <plat/pll.h>
+#include <plat/nand-core.h>
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
 	IODESC_ENT(CLKPWR),
@@ -68,7 +69,7 @@ void __init s3c244x_map_io(void)
 
 	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c0.name  = "s3c2440-i2c";
-	s3c_device_nand.name = "s3c2440-nand";
+	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }

arch/arm/mach-s3c2443/s3c2443.c

@@ -36,6 +36,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb-core.h>
+#include <plat/nand-core.h>
 
 static struct map_desc s3c2443_iodesc[] __initdata = {
 	IODESC_ENT(WATCHDOG),
@@ -62,7 +63,7 @@ int __init s3c2443_init(void)
 
 	s3c24xx_reset_hook = s3c2443_hard_reset;
 
-	s3c_device_nand.name = "s3c2412-nand";
+	s3c_nand_setname("s3c2412-nand");
 	s3c_fb_setname("s3c2443-fb");
 
 	/* change WDT IRQ number */

arch/arm/mach-s3c24a0/include/mach/vmalloc.h

@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s3c64xx/Kconfig

@@ -98,12 +98,33 @@ config MACH_ANW6410
 	help
 	  Machine support for the A&W6410
 
+config MACH_MINI6410
+	bool "MINI6410"
+	select CPU_S3C6410
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the FriendlyARM MINI6410
+
 config MACH_REAL6410
 	bool "REAL6410"
 	select CPU_S3C6410
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_NAND
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	select S3C_DEV_USB_HOST
 	help
 	  Machine support for the CoreWind REAL6410
 

arch/arm/mach-s3c64xx/Makefile

@@ -53,6 +53,7 @@ obj-$(CONFIG_MACH_ANW6410)	+= mach-anw6410.o
 obj-$(CONFIG_MACH_SMDK6400)	+= mach-smdk6400.o
 obj-$(CONFIG_MACH_SMDK6410)	+= mach-smdk6410.o
 obj-$(CONFIG_MACH_REAL6410)     += mach-real6410.o
+obj-$(CONFIG_MACH_MINI6410)     += mach-mini6410.o
 obj-$(CONFIG_MACH_NCP)		+= mach-ncp.o
 obj-$(CONFIG_MACH_HMT)		+= mach-hmt.o
 obj-$(CONFIG_MACH_SMARTQ)	+= mach-smartq.o

arch/arm/mach-s3c64xx/dev-audio.c

@@ -22,27 +22,16 @@
 #include <plat/audio.h>
 #include <plat/gpio-cfg.h>
 
-#include <mach/gpio-bank-c.h>
-#include <mach/gpio-bank-d.h>
-#include <mach/gpio-bank-e.h>
-#include <mach/gpio-bank-h.h>
-
 static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_I2S0_CLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_I2S0_CDCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_I2S0_LRCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_I2S0_DI);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_I2S0_D0);
+		base = S3C64XX_GPD(0);
 		break;
 	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_I2S1_CLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_I2S1_CDCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_I2S1_LRCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_I2S1_DI);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_I2S1_D0);
+		base = S3C64XX_GPE(0);
 		break;
 	default:
 		printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
@@ -50,18 +39,17 @@ static int s3c64xx_i2sv3_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
+
 	return 0;
 }
 
 static int s3c64xx_i2sv4_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_I2S_V40_DO0);
-	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_I2S_V40_DO1);
-	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C64XX_GPC7_I2S_V40_DO2);
-	s3c_gpio_cfgpin(S3C64XX_GPH(6), S3C64XX_GPH6_I2S_V40_BCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(7), S3C64XX_GPH7_I2S_V40_CDCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(8), S3C64XX_GPH8_I2S_V40_LRCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPH(9), S3C64XX_GPH9_I2S_V40_DI);
+	s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin(S3C64XX_GPC(7), S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin_range(S3C64XX_GPH(6), 4, S3C_GPIO_SFN(5));
 
 	return 0;
 }
@@ -170,20 +158,14 @@ EXPORT_SYMBOL(s3c64xx_device_iisv4);
 
 static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		base = S3C64XX_GPD(0);
 		break;
 	case 1:
-		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
-		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
-		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
-		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		base = S3C64XX_GPE(0);
 		break;
 	default:
 		printk(KERN_DEBUG "Invalid PCM Controller number: %d\n",
@@ -191,6 +173,7 @@ static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
 	return 0;
 }
 
@@ -264,24 +247,12 @@ EXPORT_SYMBOL(s3c64xx_device_pcm1);
 
 static int s3c64xx_ac97_cfg_gpd(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_AC97_BITCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_AC97_nRESET);
-	s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_AC97_SYNC);
-	s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_AC97_SDI);
-	s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_AC97_SDO);
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S3C64XX_GPD(0), 5, S3C_GPIO_SFN(4));
 }
 
 static int s3c64xx_ac97_cfg_gpe(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_AC97_BITCLK);
-	s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_AC97_nRESET);
-	s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_AC97_SYNC);
-	s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_AC97_SDI);
-	s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_AC97_SDO);
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S3C64XX_GPE(0), 5, S3C_GPIO_SFN(4));
 }
 
 static struct resource s3c64xx_ac97_resource[] = {

arch/arm/mach-s3c64xx/gpiolib.c

@@ -195,11 +195,6 @@ static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
-int s3c64xx_gpio2int_gpn(struct gpio_chip *chip, unsigned pin)
-{
-	return IRQ_EINT(0) + pin;
-}
-
 static struct s3c_gpio_chip gpio_2bit[] = {
 	{
 		.base	= S3C64XX_GPF_BASE,
@@ -227,12 +222,13 @@ static struct s3c_gpio_chip gpio_2bit[] = {
 		},
 	}, {
 		.base	= S3C64XX_GPN_BASE,
+		.irq_base = IRQ_EINT(0),
 		.config	= &gpio_2bit_cfg_eint10,
 		.chip	= {
 			.base	= S3C64XX_GPN(0),
 			.ngpio	= S3C64XX_GPIO_N_NR,
 			.label	= "GPN",
-			.to_irq = s3c64xx_gpio2int_gpn,
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= S3C64XX_GPO_BASE,

arch/arm/mach-s3c64xx/include/mach/vmalloc.h

@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	0xE0000000UL
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s3c64xx/mach-mini6410.c

@@ -0,0 +1,357 @@
+/* linux/arch/arm/mach-s3c64xx/mach-mini6410.c
+ *
+ * Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/dm9000.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
+#include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
+#include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
+
+#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
+
+static struct s3c2410_uartcfg mini6410_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport	= 0,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[1] = {
+		.hwport	= 1,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[2] = {
+		.hwport	= 2,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+	[3] = {
+		.hwport	= 3,
+		.flags	= 0,
+		.ucon	= UCON,
+		.ulcon	= ULCON,
+		.ufcon	= UFCON,
+	},
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+
+static struct resource mini6410_dm9k_resource[] = {
+	[0] = {
+		.start	= S3C64XX_PA_XM0CSN1,
+		.end	= S3C64XX_PA_XM0CSN1 + 1,
+		.flags	= IORESOURCE_MEM
+	},
+	[1] = {
+		.start	= S3C64XX_PA_XM0CSN1 + 4,
+		.end	= S3C64XX_PA_XM0CSN1 + 5,
+		.flags	= IORESOURCE_MEM
+	},
+	[2] = {
+		.start	= S3C_EINT(7),
+		.end	= S3C_EINT(7),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL
+	}
+};
+
+static struct dm9000_plat_data mini6410_dm9k_pdata = {
+	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+};
+
+static struct platform_device mini6410_device_eth = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(mini6410_dm9k_resource),
+	.resource	= mini6410_dm9k_resource,
+	.dev		= {
+		.platform_data	= &mini6410_dm9k_pdata,
+	},
+};
+
+static struct mtd_partition mini6410_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[2] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set mini6410_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(mini6410_nand_part),
+		.partitions	= mini6410_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand mini6410_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
+	.sets		= mini6410_nand_sets,
+};
+
+static struct s3c_fb_pd_win mini6410_fb_win[] = {
+	{
+		.win_mode	= {	/* 4.3" 480x272 */
+			.left_margin	= 3,
+			.right_margin	= 2,
+			.upper_margin	= 1,
+			.lower_margin	= 1,
+			.hsync_len	= 40,
+			.vsync_len	= 1,
+			.xres		= 480,
+			.yres		= 272,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	}, {
+		.win_mode	= {	/* 7.0" 800x480 */
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres		= 800,
+			.yres		= 480,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	},
+};
+
+static struct s3c_fb_platdata mini6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &mini6410_fb_win[0],
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static void mini6410_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power)
+		gpio_direction_output(S3C64XX_GPE(0), 1);
+	else
+		gpio_direction_output(S3C64XX_GPE(0), 0);
+}
+
+static struct plat_lcd_data mini6410_lcd_power_data = {
+	.set_power	= mini6410_lcd_power_set,
+};
+
+static struct platform_device mini6410_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &mini6410_lcd_power_data,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
+};
+
+static struct platform_device *mini6410_devices[] __initdata = {
+	&mini6410_device_eth,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_ohci,
+	&s3c_device_nand,
+	&s3c_device_fb,
+	&mini6410_lcd_powerdev,
+	&s3c_device_adc,
+	&s3c_device_ts,
+};
+
+static void __init mini6410_map_io(void)
+{
+	u32 tmp;
+
+	s3c64xx_init_io(NULL, 0);
+	s3c24xx_init_clocks(12000000);
+	s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * mini6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char mini6410_features_str[12] __initdata = "0";
+
+static int __init mini6410_features_setup(char *str)
+{
+	if (str)
+		strlcpy(mini6410_features_str, str,
+			sizeof(mini6410_features_str));
+	return 1;
+}
+
+__setup("mini6410=", mini6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct mini6410_features_t {
+	int done;
+	int lcd_index;
+};
+
+static void mini6410_parse_features(
+		struct mini6410_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->done = 0;
+	features->lcd_index = 0;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "MINI6410: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(mini6410_fb_win))
+					printk(KERN_INFO "MINI6410: '%c' out "
+						"of range LCD mode\n", f);
+				else {
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		}
+	}
+}
+
+static void __init mini6410_machine_init(void)
+{
+	u32 cs1;
+	struct mini6410_features_t features = { 0 };
+
+	printk(KERN_INFO "MINI6410: Option string mini6410=%s\n",
+			mini6410_features_str);
+
+	/* Parse the feature string */
+	mini6410_parse_features(&features, mini6410_features_str);
+
+	mini6410_lcd_pdata.win[0] = &mini6410_fb_win[features.lcd_index];
+
+	printk(KERN_INFO "MINI6410: selected LCD display is %dx%d\n",
+		mini6410_lcd_pdata.win[0]->win_mode.xres,
+		mini6410_lcd_pdata.win[0]->win_mode.yres);
+
+	s3c_nand_set_platdata(&mini6410_nand_info);
+	s3c_fb_set_platdata(&mini6410_lcd_pdata);
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
+
+	/* configure nCS1 width to 16 bits */
+
+	cs1 = __raw_readl(S3C64XX_SROM_BW) &
+		~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
+			S3C64XX_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S3C64XX_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+
+	__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
+		(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
+		(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
+		(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
+		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
+		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
+
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+	gpio_request(S3C64XX_GPE(0), "LCD power");
+
+	platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
+}
+
+MACHINE_START(MINI6410, "MINI6410")
+	/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
+	.boot_params	= S3C64XX_PA_SDRAM + 0x100,
+	.init_irq	= s3c6410_init_irq,
+	.map_io		= mini6410_map_io,
+	.init_machine	= mini6410_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END

arch/arm/mach-s3c64xx/mach-real6410.c

@@ -12,23 +12,39 @@
  *
 */
 
-#include <linux/kernel.h>
-#include <linux/types.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
 #include <linux/list.h>
-#include <linux/init.h>
 #include <linux/dm9000.h>
-#include <linux/serial_core.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/types.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+
 #include <mach/map.h>
-#include <mach/s3c6410.h>
+#include <mach/regs-fb.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-modem.h>
 #include <mach/regs-srom.h>
+#include <mach/s3c6410.h>
+
+#include <plat/adc.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
+#include <plat/nand.h>
 #include <plat/regs-serial.h>
+#include <plat/ts.h>
+
+#include <video/platform_lcd.h>
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -99,22 +115,192 @@ static struct platform_device real6410_device_eth = {
 	},
 };
 
+static struct s3c_fb_pd_win real6410_fb_win[] = {
+	{
+		.win_mode	= {	/* 4.3" 480x272 */
+			.left_margin	= 3,
+			.right_margin	= 2,
+			.upper_margin	= 1,
+			.lower_margin	= 1,
+			.hsync_len	= 40,
+			.vsync_len	= 1,
+			.xres		= 480,
+			.yres		= 272,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	}, {
+		.win_mode	= {	/* 7.0" 800x480 */
+			.left_margin	= 8,
+			.right_margin	= 13,
+			.upper_margin	= 7,
+			.lower_margin	= 5,
+			.hsync_len	= 3,
+			.vsync_len	= 1,
+			.xres		= 800,
+			.yres		= 480,
+		},
+		.max_bpp	= 32,
+		.default_bpp	= 16,
+	},
+};
+
+static struct s3c_fb_platdata real6410_lcd_pdata __initdata = {
+	.setup_gpio	= s3c64xx_fb_gpio_setup_24bpp,
+	.win[0]		= &real6410_fb_win[0],
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+static struct mtd_partition real6410_nand_part[] = {
+	[0] = {
+		.name	= "uboot",
+		.size	= SZ_1M,
+		.offset	= 0,
+	},
+	[1] = {
+		.name	= "kernel",
+		.size	= SZ_2M,
+		.offset	= SZ_1M,
+	},
+	[2] = {
+		.name	= "rootfs",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= SZ_1M + SZ_2M,
+	},
+};
+
+static struct s3c2410_nand_set real6410_nand_sets[] = {
+	[0] = {
+		.name		= "nand",
+		.nr_chips	= 1,
+		.nr_partitions	= ARRAY_SIZE(real6410_nand_part),
+		.partitions	= real6410_nand_part,
+	},
+};
+
+static struct s3c2410_platform_nand real6410_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 55,
+	.twrph1		= 40,
+	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
+	.sets		= real6410_nand_sets,
+};
+
 static struct platform_device *real6410_devices[] __initdata = {
 	&real6410_device_eth,
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
+	&s3c_device_fb,
+	&s3c_device_nand,
+	&s3c_device_adc,
+	&s3c_device_ts,
+	&s3c_device_ohci,
+};
+
+static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
+	.delay			= 10000,
+	.presc			= 49,
+	.oversampling_shift	= 2,
 };
 
 static void __init real6410_map_io(void)
 {
+	u32 tmp;
+
 	s3c64xx_init_io(NULL, 0);
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
+
+	/* set the LCD type */
+	tmp = __raw_readl(S3C64XX_SPCON);
+	tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+	tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+	__raw_writel(tmp, S3C64XX_SPCON);
+
+	/* remove the LCD bypass */
+	tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+	tmp &= ~MIFPCON_LCD_BYPASS;
+	__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/*
+ * real6410_features string
+ *
+ * 0-9 LCD configuration
+ *
+ */
+static char real6410_features_str[12] __initdata = "0";
+
+static int __init real6410_features_setup(char *str)
+{
+	if (str)
+		strlcpy(real6410_features_str, str,
+			sizeof(real6410_features_str));
+	return 1;
+}
+
+__setup("real6410=", real6410_features_setup);
+
+#define FEATURE_SCREEN (1 << 0)
+
+struct real6410_features_t {
+	int done;
+	int lcd_index;
+};
+
+static void real6410_parse_features(
+		struct real6410_features_t *features,
+		const char *features_str)
+{
+	const char *fp = features_str;
+
+	features->done = 0;
+	features->lcd_index = 0;
+
+	while (*fp) {
+		char f = *fp++;
+
+		switch (f) {
+		case '0'...'9':	/* tft screen */
+			if (features->done & FEATURE_SCREEN) {
+				printk(KERN_INFO "REAL6410: '%c' ignored, "
+					"screen type already set\n", f);
+			} else {
+				int li = f - '0';
+				if (li >= ARRAY_SIZE(real6410_fb_win))
+					printk(KERN_INFO "REAL6410: '%c' out "
+						"of range LCD mode\n", f);
+				else {
+					features->lcd_index = li;
+				}
+			}
+			features->done |= FEATURE_SCREEN;
+			break;
+		}
+	}
 }
 
 static void __init real6410_machine_init(void)
 {
 	u32 cs1;
+	struct real6410_features_t features = { 0 };
+
+	printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
+			real6410_features_str);
+
+	/* Parse the feature string */
+	real6410_parse_features(&features, real6410_features_str);
+
+	real6410_lcd_pdata.win[0] = &real6410_fb_win[features.lcd_index];
+
+	printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
+		real6410_lcd_pdata.win[0]->win_mode.xres,
+		real6410_lcd_pdata.win[0]->win_mode.yres);
+
+	s3c_fb_set_platdata(&real6410_lcd_pdata);
+	s3c_nand_set_platdata(&real6410_nand_info);
+	s3c24xx_ts_set_platdata(&s3c_ts_platform);
 
 	/* configure nCS1 width to 16 bits */
 
@@ -136,6 +322,8 @@ static void __init real6410_machine_init(void)
 		(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
 		(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
 
+	gpio_request(S3C64XX_GPF(15), "LCD power");
+
 	platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
 }
 

arch/arm/mach-s3c64xx/setup-fb-24bpp.c

@@ -23,15 +23,6 @@
 
 extern void s3c64xx_fb_gpio_setup_24bpp(void)
 {
-	unsigned int gpio;
-
-	for (gpio = S3C64XX_GPI(0); gpio <= S3C64XX_GPI(15); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S3C64XX_GPJ(0); gpio <= S3C64XX_GPJ(11); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2));
 }

arch/arm/mach-s3c64xx/setup-ide.c

@@ -17,11 +17,11 @@
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
+#include <plat/ata.h>
 
 void s3c64xx_ide_setup_gpio(void)
 {
 	u32 reg;
-	u32 gpio = 0;
 
 	reg = readl(S3C_MEM_SYS_CFG) & (~0x3f);
 
@@ -32,15 +32,12 @@ void s3c64xx_ide_setup_gpio(void)
 	s3c_gpio_cfgpin(S3C64XX_GPB(4), S3C_GPIO_SFN(4));
 
 	/* Set XhiDATA[15:0] pins as CF Data[15:0] */
-	for (gpio = S3C64XX_GPK(0); gpio <= S3C64XX_GPK(15); gpio++)
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(5));
+	s3c_gpio_cfgpin_range(S3C64XX_GPK(0), 16, S3C_GPIO_SFN(5));
 
 	/* Set XhiADDR[2:0] pins as CF ADDR[2:0] */
-	for (gpio = S3C64XX_GPL(0); gpio <= S3C64XX_GPL(2); gpio++)
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+	s3c_gpio_cfgpin_range(S3C64XX_GPL(0), 3, S3C_GPIO_SFN(6));
 
 	/* Set Xhi ctrl pins as CF ctrl pins(IORDY, IOWR, IORD, CE[0:1]) */
 	s3c_gpio_cfgpin(S3C64XX_GPM(5), S3C_GPIO_SFN(1));
-	for (gpio = S3C64XX_GPM(0); gpio <= S3C64XX_GPM(4); gpio++)
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(6));
+	s3c_gpio_cfgpin_range(S3C64XX_GPM(0), 5, S3C_GPIO_SFN(6));
 }

arch/arm/mach-s3c64xx/setup-keypad.c

@@ -12,23 +12,13 @@
 
 #include <linux/gpio.h>
 #include <plat/gpio-cfg.h>
+#include <plat/keypad.h>
 
 void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 {
-	unsigned int gpio;
-	unsigned int end;
-
 	/* Set all the necessary GPK pins to special-function 3: KP_ROW[x] */
-	end = S3C64XX_GPK(8 + rows);
-	for (gpio = S3C64XX_GPK(8); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPK(8), 8 + rows, S3C_GPIO_SFN(3));
 
 	/* Set all the necessary GPL pins to special-function 3: KP_COL[x] */
-	end = S3C64XX_GPL(0 + cols);
-	for (gpio = S3C64XX_GPL(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPL(0), cols, S3C_GPIO_SFN(3));
 }

arch/arm/mach-s3c64xx/setup-sdhci-gpio.c

@@ -24,16 +24,9 @@
 void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
 
-	end = S3C64XX_GPG(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	/* Set all the necessary GPG pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
@@ -44,16 +37,9 @@ void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
 
-	end = S3C64XX_GPH(2 + width);
-
-	/* Set all the necessary GPG pins to special-function 0 */
-	for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	/* Set all the necessary GPH pins to special-function 2 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(0), 2 + width, S3C_GPIO_SFN(2));
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
@@ -63,20 +49,9 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 
 void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
-	unsigned int gpio;
-	unsigned int end;
+	/* Set all the necessary GPH pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPH(6), width, S3C_GPIO_SFN(3));
 
-	end = S3C64XX_GPH(6 + width);
-
-	/* Set all the necessary GPH pins to special-function 1 */
-	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	/* Set all the necessary GPC pins to special-function 1 */
-	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	/* Set all the necessary GPC pins to special-function 3 */
+	s3c_gpio_cfgrange_nopull(S3C64XX_GPC(4), 2, S3C_GPIO_SFN(3));
 }

arch/arm/mach-s5p6442/Kconfig

@@ -11,7 +11,6 @@ if ARCH_S5P6442
 
 config CPU_S5P6442
 	bool
-	select PLAT_S5P
 	select S3C_PL330_DMA
 	help
 	  Enable S5P6442 CPU support

arch/arm/mach-s5p6442/clock.c

@@ -192,6 +192,11 @@ static struct clk clk_pclkd1 = {
 	.parent		= &clk_hclkd1,
 };
 
+int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable);
+}
+
 int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable);
@@ -335,6 +340,16 @@ void __init_or_cpufreq s5p6442_setup_clocks(void)
 	clk_pclkd1.rate = pclkd1;
 }
 
+static struct clk init_clocks_disable[] = {
+	{
+		.name		= "pdma",
+		.id		= -1,
+		.parent		= &clk_pclkd1,
+		.enable		= s5p6442_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 3),
+	},
+};
+
 static struct clk init_clocks[] = {
 	{
 		.name		= "systimer",
@@ -393,10 +408,23 @@ static struct clk *clks[] __initdata = {
 
 void __init s5p6442_register_clocks(void)
 {
+	struct clk *clkptr;
+	int i, ret;
+
 	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
 
 	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
 	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
 
+	clkptr = init_clocks_disable;
+	for (i = 0; i < ARRAY_SIZE(init_clocks_disable); i++, clkptr++) {
+		ret = s3c24xx_register_clock(clkptr);
+		if (ret < 0) {
+			printk(KERN_ERR "Fail to register clock %s (%d)\n",
+					clkptr->name, ret);
+		} else
+			(clkptr->enable)(clkptr, 0);
+	}
+
 	s3c_pwmclk_init();
 }

arch/arm/mach-s5p6442/dev-audio.c

@@ -21,22 +21,16 @@
 
 static int s5p6442_cfg_i2s(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case 1:
-		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(2));
+		base = S5P6442_GPC1(0);
 		break;
 
 	case -1:
-		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(2));
+		base = S5P6442_GPC0(0);
 		break;
 
 	default:
@@ -44,6 +38,7 @@ static int s5p6442_cfg_i2s(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2));
 	return 0;
 }
 
@@ -111,21 +106,15 @@ struct platform_device s5p6442_device_iis1 = {
 
 static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5P6442_GPC0(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC0(4), S3C_GPIO_SFN(3));
+		base = S5P6442_GPC0(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5P6442_GPC1(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5P6442_GPC1(4), S3C_GPIO_SFN(3));
+		base = S5P6442_GPC1(0);
 		break;
 
 	default:
@@ -133,6 +122,7 @@ static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3));
 	return 0;
 }
 

arch/arm/mach-s5p6442/dev-spi.c

@@ -38,11 +38,9 @@ static int s5p6442_spi_cfg_gpio(struct platform_device *pdev)
 	switch (pdev->id) {
 	case 0:
 		s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPB(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6442_GPB(3), S3C_GPIO_SFN(2));
 		s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6442_GPB(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6442_GPB(3), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5P6442_GPB(2), 2,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 		break;
 
 	default:

arch/arm/mach-s5p6442/dma.c

@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5p6442_pdma_pdata = {
 
 static struct platform_device s5p6442_device_pdma = {
 	.name		= "s3c-pl330",
-	.id		= 1,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s5p6442_pdma_resource),
 	.resource	= s5p6442_pdma_resource,
 	.dev		= {

arch/arm/mach-s5p6442/include/mach/regs-clock.h

@@ -46,6 +46,7 @@
 #define S5P_CLK_DIV5		S5P_CLKREG(0x314)
 #define S5P_CLK_DIV6		S5P_CLKREG(0x318)
 
+#define S5P_CLKGATE_IP0		S5P_CLKREG(0x460)
 #define S5P_CLKGATE_IP3		S5P_CLKREG(0x46C)
 
 /* CLK_OUT */

arch/arm/mach-s5p6442/include/mach/vmalloc.h

@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	0xE0000000UL
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s5p64x0/Kconfig

@@ -9,14 +9,12 @@ if ARCH_S5P64X0
 
 config CPU_S5P6440
 	bool
-	select PLAT_S5P
 	select S3C_PL330_DMA
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select PLAT_S5P
 	select S3C_PL330_DMA
 	help
 	  Enable S5P6450 CPU support

arch/arm/mach-s5p64x0/clock-s5p6440.c

@@ -79,13 +79,16 @@ static int s5p6440_epll_set_rate(struct clk *clk, unsigned long rate)
 	__raw_writel(epll_con, S5P64X0_EPLL_CON);
 	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
 
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
 	clk->rate = rate;
 
 	return 0;
 }
 
 static struct clk_ops s5p6440_epll_ops = {
-	.get_rate = s5p64x0_epll_get_rate,
+	.get_rate = s5p_epll_get_rate,
 	.set_rate = s5p6440_epll_set_rate,
 };
 
@@ -149,6 +152,12 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_hclk.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 8),
+	}, {
+		.name		= "pdma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
 		.id		= 0,
@@ -330,12 +339,6 @@ static struct clk init_clocks[] = {
 		.parent		= &clk_hclk.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "dma",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "uart",
 		.id		= 0,
@@ -548,7 +551,7 @@ void __init_or_cpufreq s5p6440_setup_clocks(void)
 
 	/* Set S5P6440 functions for clk_fout_epll */
 
-	clk_fout_epll.enable = s5p64x0_epll_enable;
+	clk_fout_epll.enable = s5p_epll_enable;
 	clk_fout_epll.ops = &s5p6440_epll_ops;
 
 	clk_48m.enable = s5p64x0_clk48m_ctrl;

arch/arm/mach-s5p64x0/clock-s5p6450.c

@@ -80,13 +80,16 @@ static int s5p6450_epll_set_rate(struct clk *clk, unsigned long rate)
 	__raw_writel(epll_con, S5P64X0_EPLL_CON);
 	__raw_writel(epll_con_k, S5P64X0_EPLL_CON_K);
 
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
 	clk->rate = rate;
 
 	return 0;
 }
 
 static struct clk_ops s5p6450_epll_ops = {
-	.get_rate = s5p64x0_epll_get_rate,
+	.get_rate = s5p_epll_get_rate,
 	.set_rate = s5p6450_epll_set_rate,
 };
 
@@ -185,6 +188,12 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_hclk_low.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "pdma",
+		.id		= -1,
+		.parent		= &clk_hclk_low.clk,
+		.enable		= s5p64x0_hclk0_ctrl,
+		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
 		.id		= 0,
@@ -282,12 +291,6 @@ static struct clk init_clocks[] = {
 		.parent		= &clk_hclk.clk,
 		.enable		= s5p64x0_hclk0_ctrl,
 		.ctrlbit	= (1 << 21),
-	}, {
-		.name		= "dma",
-		.id		= -1,
-		.parent		= &clk_hclk_low.clk,
-		.enable		= s5p64x0_hclk0_ctrl,
-		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "uart",
 		.id		= 0,
@@ -581,7 +584,7 @@ void __init_or_cpufreq s5p6450_setup_clocks(void)
 
 	/* Set S5P6450 functions for clk_fout_epll */
 
-	clk_fout_epll.enable = s5p64x0_epll_enable;
+	clk_fout_epll.enable = s5p_epll_enable;
 	clk_fout_epll.ops = &s5p6450_epll_ops;
 
 	clk_48m.enable = s5p64x0_clk48m_ctrl;

arch/arm/mach-s5p64x0/clock.c

@@ -73,24 +73,6 @@ static const u32 clock_table[][3] = {
 	{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
 };
 
-int s5p64x0_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P64X0_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P64X0_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P64X0_EPLL_CON);
-
-	return 0;
-}
-
-unsigned long s5p64x0_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
 unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
 {
 	unsigned long rate = clk_get_rate(clk->parent);

arch/arm/mach-s5p64x0/dev-audio.c

@@ -24,13 +24,8 @@ static int s5p6440_cfg_i2s(struct platform_device *pdev)
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case -1:
-		s3c_gpio_cfgpin(S5P6440_GPR(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(4), 5, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(5));
 		break;
 
 	default:
@@ -47,13 +42,9 @@ static int s5p6450_cfg_i2s(struct platform_device *pdev)
 	switch (pdev->id) {
 	case -1:
 		s3c_gpio_cfgpin(S5P6450_GPB(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(4), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(5), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(6), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(7), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(8), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(13), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5P6450_GPR(14), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPR(4), 5, S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5P6450_GPR(13), 2, S3C_GPIO_SFN(5));
+
 		break;
 
 	default:
@@ -116,11 +107,8 @@ static int s5p6440_pcm_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPR(7), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(13), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(14), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(8), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPR(6), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(6), 3, S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5P6440_GPR(13), 2, S3C_GPIO_SFN(2));
 		break;
 
 	default:

arch/arm/mach-s5p64x0/dev-spi.c

@@ -39,23 +39,15 @@ static char *s5p64x0_spi_src_clks[] = {
  */
 static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5P6440_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(2), S3C_GPIO_PULL_UP);
+		base = S5P6440_GPC(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5P6440_GPC(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6440_GPC(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6440_GPC(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6440_GPC(6), S3C_GPIO_PULL_UP);
+		base = S5P6440_GPC(4);
 		break;
 
 	default:
@@ -63,28 +55,23 @@ static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
 	return 0;
 }
 
 static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5P6450_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6450_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6450_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6450_GPC(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6450_GPC(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6450_GPC(2), S3C_GPIO_PULL_UP);
+		base = S5P6450_GPC(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5P6450_GPC(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6450_GPC(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5P6450_GPC(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5P6450_GPC(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6450_GPC(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5P6450_GPC(6), S3C_GPIO_PULL_UP);
+		base = S5P6450_GPC(4);
 		break;
 
 	default:
@@ -92,6 +79,9 @@ static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
 	return 0;
 }
 

arch/arm/mach-s5p64x0/dma.c

@@ -122,7 +122,7 @@ static struct s3c_pl330_platdata s5p6450_pdma_pdata = {
 
 static struct platform_device s5p64x0_device_pdma = {
 	.name		= "s3c-pl330",
-	.id		= 0,
+	.id		= -1,
 	.num_resources	= ARRAY_SIZE(s5p64x0_pdma_resource),
 	.resource	= s5p64x0_pdma_resource,
 	.dev		= {

arch/arm/mach-s5p64x0/include/mach/regs-clock.h

@@ -60,4 +60,6 @@
 #define ARM_DIV_RATIO_SHIFT		0
 #define ARM_DIV_MASK			(0xF << ARM_DIV_RATIO_SHIFT)
 
+#define S5P_EPLL_CON			S5P64X0_EPLL_CON
+
 #endif /* __ASM_ARCH_REGS_CLOCK_H */

arch/arm/mach-s5p64x0/include/mach/vmalloc.h

@@ -15,6 +15,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	0xE0000000UL
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s5p64x0/setup-i2c0.c

@@ -25,18 +25,14 @@ struct platform_device; /* don't need the contents */
 
 void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5P6440_GPB(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5P6440_GPB(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5P6440_GPB(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5P6440_GPB(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5P6440_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
 
 void s5p6450_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5P6450_GPB(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5P6450_GPB(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5P6450_GPB(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5P6450_GPB(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5P6450_GPB(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev) { }

arch/arm/mach-s5p64x0/setup-i2c1.c

@@ -25,18 +25,14 @@ struct platform_device; /* don't need the contents */
 
 void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5P6440_GPR(9), S3C_GPIO_SFN(6));
-	s3c_gpio_setpull(S5P6440_GPR(9), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5P6440_GPR(10), S3C_GPIO_SFN(6));
-	s3c_gpio_setpull(S5P6440_GPR(10), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5P6440_GPR(9), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
 }
 
 void s5p6450_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5P6450_GPR(9), S3C_GPIO_SFN(6));
-	s3c_gpio_setpull(S5P6450_GPR(9), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5P6450_GPR(10), S3C_GPIO_SFN(6));
-	s3c_gpio_setpull(S5P6450_GPR(10), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5P6450_GPR(9), 2,
+			      S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
 }
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev) { }

arch/arm/mach-s5pc100/Kconfig

@@ -9,7 +9,6 @@ if ARCH_S5PC100
 
 config CPU_S5PC100
 	bool
-	select PLAT_S5P
 	select S5P_EXT_INT
 	select S3C_PL330_DMA
 	help

arch/arm/mach-s5pc100/Makefile

@@ -11,7 +11,7 @@ obj-				:=
 
 # Core support for S5PC100 system
 
-obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o irq-gpio.o
+obj-$(CONFIG_CPU_S5PC100)	+= cpu.o init.o clock.o gpiolib.o
 obj-$(CONFIG_CPU_S5PC100)	+= setup-i2c0.o
 obj-$(CONFIG_CPU_S5PC100)	+= dma.o
 

arch/arm/mach-s5pc100/clock.c

@@ -273,24 +273,6 @@ static struct clksrc_clk clk_div_hdmi = {
 	.reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 },
 };
 
-static int s5pc100_epll_enable(struct clk *clk, int enable)
-{
-	unsigned int ctrlbit = clk->ctrlbit;
-	unsigned int epll_con = __raw_readl(S5P_EPLL_CON) & ~ctrlbit;
-
-	if (enable)
-		__raw_writel(epll_con | ctrlbit, S5P_EPLL_CON);
-	else
-		__raw_writel(epll_con, S5P_EPLL_CON);
-
-	return 0;
-}
-
-static unsigned long s5pc100_epll_get_rate(struct clk *clk)
-{
-	return clk->rate;
-}
-
 static u32 epll_div[][4] = {
 	{ 32750000,	131, 3, 4 },
 	{ 32768000,	131, 3, 4 },
@@ -341,13 +323,16 @@ static int s5pc100_epll_set_rate(struct clk *clk, unsigned long rate)
 
 	__raw_writel(epll_con, S5P_EPLL_CON);
 
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
 	clk->rate = rate;
 
 	return 0;
 }
 
 static struct clk_ops s5pc100_epll_ops = {
-	.get_rate = s5pc100_epll_get_rate,
+	.get_rate = s5p_epll_get_rate,
 	.set_rate = s5pc100_epll_set_rate,
 };
 
@@ -691,55 +676,55 @@ static struct clk init_clocks_disable[] = {
 	}, {
 		.name		= "iis",
 		.id		= 0,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
 		.name		= "iis",
 		.id		= 1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 1),
 	}, {
 		.name		= "iis",
 		.id		= 2,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 2),
 	}, {
 		.name		= "ac97",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "pcm",
 		.id		= 0,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 4),
 	}, {
 		.name		= "pcm",
 		.id		= 1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "spdif",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "adc",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "keypad",
 		.id		= -1,
-		.parent		= &clk_div_d1_bus.clk,
+		.parent		= &clk_div_pclkd1.clk,
 		.enable		= s5pc100_d1_5_ctrl,
 		.ctrlbit	= (1 << 8),
 	}, {
@@ -848,6 +833,18 @@ struct clksrc_sources clk_src_group3 = {
 	.nr_sources	= ARRAY_SIZE(clk_src_group3_list),
 };
 
+static struct clksrc_clk clk_sclk_audio0 = {
+	.clk	= {
+		.name		= "sclk_audio",
+		.id		= 0,
+		.ctrlbit	= (1 << 8),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_group3,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
 static struct clk *clk_src_group4_list[] = {
 	[0] = &clk_mout_epll.clk,
 	[1] = &clk_div_mpll.clk,
@@ -862,6 +859,18 @@ struct clksrc_sources clk_src_group4 = {
 	.nr_sources	= ARRAY_SIZE(clk_src_group4_list),
 };
 
+static struct clksrc_clk clk_sclk_audio1 = {
+	.clk	= {
+		.name		= "sclk_audio",
+		.id		= 1,
+		.ctrlbit	= (1 << 9),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_group4,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
 static struct clk *clk_src_group5_list[] = {
 	[0] = &clk_mout_epll.clk,
 	[1] = &clk_div_mpll.clk,
@@ -875,6 +884,18 @@ struct clksrc_sources clk_src_group5 = {
 	.nr_sources	= ARRAY_SIZE(clk_src_group5_list),
 };
 
+static struct clksrc_clk clk_sclk_audio2 = {
+	.clk	= {
+		.name		= "sclk_audio",
+		.id		= 2,
+		.ctrlbit	= (1 << 10),
+		.enable		= s5pc100_sclk1_ctrl,
+	},
+	.sources = &clk_src_group5,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
+	.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
 static struct clk *clk_src_group6_list[] = {
 	[0] = &s5p_clk_27m,
 	[1] = &clk_vclk54m,
@@ -944,6 +965,64 @@ struct clksrc_sources clk_src_pwi = {
 	.nr_sources	= ARRAY_SIZE(clk_src_pwi_list),
 };
 
+static struct clk *clk_sclk_spdif_list[] = {
+	[0] = &clk_sclk_audio0.clk,
+	[1] = &clk_sclk_audio1.clk,
+	[2] = &clk_sclk_audio2.clk,
+};
+
+struct clksrc_sources clk_src_sclk_spdif = {
+	.sources	= clk_sclk_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clk_sclk_spdif_list),
+};
+
+static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+static unsigned long s5pc100_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(clk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+static struct clk_ops s5pc100_sclk_spdif_ops = {
+	.set_rate	= s5pc100_spdif_set_rate,
+	.get_rate	= s5pc100_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+	.clk	= {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.ctrlbit	= (1 << 11),
+		.enable		= s5pc100_sclk1_ctrl,
+		.ops		= &s5pc100_sclk_spdif_ops,
+	},
+	.sources = &clk_src_sclk_spdif,
+	.reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 },
+};
+
 static struct clksrc_clk clksrcs[] = {
 	{
 		.clk	= {
@@ -999,39 +1078,6 @@ static struct clksrc_clk clksrcs[] = {
 		},
 		.sources = &clk_src_group6,
 		.reg_src = { .reg = S5P_CLK_SRC2, .shift = 28, .size = 2 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio",
-			.id		= 0,
-			.ctrlbit	= (1 << 8),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group3,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 12, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio",
-			.id		= 1,
-			.ctrlbit	= (1 << 9),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group4,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 16, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
-	}, {
-		.clk	= {
-			.name		= "sclk_audio",
-			.id		= 2,
-			.ctrlbit	= (1 << 10),
-			.enable		= s5pc100_sclk1_ctrl,
-
-		},
-		.sources = &clk_src_group5,
-		.reg_src = { .reg = S5P_CLK_SRC3, .shift = 20, .size = 3 },
-		.reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
 	}, {
 		.clk	= {
 			.name		= "sclk_lcd",
@@ -1179,6 +1225,10 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_div_pclkd1,
 	&clk_div_cam,
 	&clk_div_hdmi,
+	&clk_sclk_audio0,
+	&clk_sclk_audio1,
+	&clk_sclk_audio2,
+	&clk_sclk_spdif,
 };
 
 void __init_or_cpufreq s5pc100_setup_clocks(void)
@@ -1196,7 +1246,7 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 	unsigned int ptr;
 
 	/* Set S5PC100 functions for clk_fout_epll */
-	clk_fout_epll.enable = s5pc100_epll_enable;
+	clk_fout_epll.enable = s5p_epll_enable;
 	clk_fout_epll.ops = &s5pc100_epll_ops;
 
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);

arch/arm/mach-s5pc100/dev-audio.c

@@ -24,19 +24,11 @@ static int s5pc100_cfg_i2s(struct platform_device *pdev)
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case 1:
-		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(2));
 		break;
 
 	case 2:
-		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(4));
 		break;
 
 	case -1: /* Dedicated pins */
@@ -144,19 +136,11 @@ static int s5pc100_pcm_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(1), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(5));
-		s3c_gpio_cfgpin(S5PC100_GPG3(4), S3C_GPIO_SFN(5));
+		s3c_gpio_cfgpin_range(S5PC100_GPG3(0), 5, S3C_GPIO_SFN(5));
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(3));
 		break;
 
 	default:
@@ -231,13 +215,7 @@ struct platform_device s5pc100_device_pcm1 = {
 
 static int s5pc100_ac97_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S5PC100_GPC(0), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(1), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(2), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(3), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PC100_GPC(4), S3C_GPIO_SFN(4));
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S5PC100_GPC(0), 5, S3C_GPIO_SFN(4));
 }
 
 static struct resource s5pc100_ac97_resource[] = {
@@ -285,3 +263,57 @@ struct platform_device s5pc100_device_ac97 = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
+
+/* S/PDIF Controller platform_device */
+static int s5pc100_spdif_cfg_gpd(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PC100_GPD(5), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static int s5pc100_spdif_cfg_gpg3(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PC100_GPG3(5), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s5pc100_spdif_resource[] = {
+	[0] = {
+		.start	= S5PC100_PA_SPDIF,
+		.end	= S5PC100_PA_SPDIF + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPDIF,
+		.end	= DMACH_SPDIF,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s5p_spdif_pdata = {
+	.cfg_gpio = s5pc100_spdif_cfg_gpd,
+};
+
+static u64 s5pc100_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pc100_device_spdif = {
+	.name		= "samsung-spdif",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5pc100_spdif_resource),
+	.resource	= s5pc100_spdif_resource,
+	.dev = {
+		.platform_data = &s5p_spdif_pdata,
+		.dma_mask = &s5pc100_spdif_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};
+
+void __init s5pc100_spdif_setup_gpio(int gpio)
+{
+	if (gpio == S5PC100_SPDIF_GPD)
+		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpd;
+	else
+		s5p_spdif_pdata.cfg_gpio = s5pc100_spdif_cfg_gpg3;
+}

arch/arm/mach-s5pc100/dev-spi.c

@@ -38,30 +38,20 @@ static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PC100_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PC100_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(2), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5PC100_GPB(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PC100_GPB(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PC100_GPB(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPB(6), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+				      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 		break;
 
 	case 2:
 		s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPG3(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PC100_GPG3(3), S3C_GPIO_SFN(3));
 		s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPG3(2), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PC100_GPG3(3), S3C_GPIO_PULL_UP);
+		s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+				      S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 		break;
 
 	default:

arch/arm/mach-s5pc100/dma.c

@@ -81,7 +81,7 @@ static struct s3c_pl330_platdata s5pc100_pdma0_pdata = {
 
 static struct platform_device s5pc100_device_pdma0 = {
 	.name		= "s3c-pl330",
-	.id		= 1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5pc100_pdma0_resource),
 	.resource	= s5pc100_pdma0_resource,
 	.dev		= {
@@ -143,7 +143,7 @@ static struct s3c_pl330_platdata s5pc100_pdma1_pdata = {
 
 static struct platform_device s5pc100_device_pdma1 = {
 	.name		= "s3c-pl330",
-	.id		= 2,
+	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5pc100_pdma1_resource),
 	.resource	= s5pc100_pdma1_resource,
 	.dev		= {

arch/arm/mach-s5pc100/gpiolib.c

@@ -1,5 +1,7 @@
-/*
- * arch/arm/plat-s5pc100/gpiolib.c
+/* linux/arch/arm/mach-s5pc100/gpiolib.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
  *
  *  Copyright 2009 Samsung Electronics Co
  *  Kyungmin Park <kyungmin.park@samsung.com>
@@ -61,30 +63,6 @@
  * L3	8	4Bit	None
  */
 
-static int s5pc100_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
-{
-	return S3C_IRQ_GPIO(chip->base + offset);
-}
-
-static int s5pc100_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
-{
-	int base;
-
-	base = chip->base - S5PC100_GPH0(0);
-	if (base == 0)
-		return IRQ_EINT(offset);
-	base = chip->base - S5PC100_GPH1(0);
-	if (base == 0)
-		return IRQ_EINT(8 + offset);
-	base = chip->base - S5PC100_GPH2(0);
-	if (base == 0)
-		return IRQ_EINT(16 + offset);
-	base = chip->base - S5PC100_GPH3(0);
-	if (base == 0)
-		return IRQ_EINT(24 + offset);
-	return -EINVAL;
-}
-
 static struct s3c_gpio_cfg gpio_cfg = {
 	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
 	.set_pull	= s3c_gpio_setpull_updown,
@@ -104,209 +82,150 @@ static struct s3c_gpio_cfg gpio_cfg_noint = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC100_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+
+/*
+ * Following are the gpio banks in S5PC100.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
 static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 	{
-		.base	= S5PC100_GPA0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPA0(0),
 			.ngpio	= S5PC100_GPIO_A0_NR,
 			.label	= "GPA0",
 		},
 	}, {
-		.base	= S5PC100_GPA1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPA1(0),
 			.ngpio	= S5PC100_GPIO_A1_NR,
 			.label	= "GPA1",
 		},
 	}, {
-		.base	= S5PC100_GPB_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPB(0),
 			.ngpio	= S5PC100_GPIO_B_NR,
 			.label	= "GPB",
 		},
 	}, {
-		.base	= S5PC100_GPC_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPC(0),
 			.ngpio	= S5PC100_GPIO_C_NR,
 			.label	= "GPC",
 		},
 	}, {
-		.base	= S5PC100_GPD_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPD(0),
 			.ngpio	= S5PC100_GPIO_D_NR,
 			.label	= "GPD",
 		},
 	}, {
-		.base	= S5PC100_GPE0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPE0(0),
 			.ngpio	= S5PC100_GPIO_E0_NR,
 			.label	= "GPE0",
 		},
 	}, {
-		.base	= S5PC100_GPE1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPE1(0),
 			.ngpio	= S5PC100_GPIO_E1_NR,
 			.label	= "GPE1",
 		},
 	}, {
-		.base	= S5PC100_GPF0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF0(0),
 			.ngpio	= S5PC100_GPIO_F0_NR,
 			.label	= "GPF0",
 		},
 	}, {
-		.base	= S5PC100_GPF1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF1(0),
 			.ngpio	= S5PC100_GPIO_F1_NR,
 			.label	= "GPF1",
 		},
 	}, {
-		.base	= S5PC100_GPF2_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF2(0),
 			.ngpio	= S5PC100_GPIO_F2_NR,
 			.label	= "GPF2",
 		},
 	}, {
-		.base	= S5PC100_GPF3_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPF3(0),
 			.ngpio	= S5PC100_GPIO_F3_NR,
 			.label	= "GPF3",
 		},
 	}, {
-		.base	= S5PC100_GPG0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG0(0),
 			.ngpio	= S5PC100_GPIO_G0_NR,
 			.label	= "GPG0",
 		},
 	}, {
-		.base	= S5PC100_GPG1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG1(0),
 			.ngpio	= S5PC100_GPIO_G1_NR,
 			.label	= "GPG1",
 		},
 	}, {
-		.base	= S5PC100_GPG2_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG2(0),
 			.ngpio	= S5PC100_GPIO_G2_NR,
 			.label	= "GPG2",
 		},
 	}, {
-		.base	= S5PC100_GPG3_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPG3(0),
 			.ngpio	= S5PC100_GPIO_G3_NR,
 			.label	= "GPG3",
 		},
 	}, {
-		.base	= S5PC100_GPH0_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH0(0),
-			.ngpio	= S5PC100_GPIO_H0_NR,
-			.label	= "GPH0",
-		},
-	}, {
-		.base	= S5PC100_GPH1_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH1(0),
-			.ngpio	= S5PC100_GPIO_H1_NR,
-			.label	= "GPH1",
-		},
-	}, {
-		.base	= S5PC100_GPH2_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH2(0),
-			.ngpio	= S5PC100_GPIO_H2_NR,
-			.label	= "GPH2",
-		},
-	}, {
-		.base	= S5PC100_GPH3_BASE,
-		.config	= &gpio_cfg_eint,
-		.chip	= {
-			.base	= S5PC100_GPH3(0),
-			.ngpio	= S5PC100_GPIO_H3_NR,
-			.label	= "GPH3",
-		},
-	}, {
-		.base	= S5PC100_GPI_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPI(0),
 			.ngpio	= S5PC100_GPIO_I_NR,
 			.label	= "GPI",
 		},
 	}, {
-		.base	= S5PC100_GPJ0_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ0(0),
 			.ngpio	= S5PC100_GPIO_J0_NR,
 			.label	= "GPJ0",
 		},
 	}, {
-		.base	= S5PC100_GPJ1_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ1(0),
 			.ngpio	= S5PC100_GPIO_J1_NR,
 			.label	= "GPJ1",
 		},
 	}, {
-		.base	= S5PC100_GPJ2_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ2(0),
 			.ngpio	= S5PC100_GPIO_J2_NR,
 			.label	= "GPJ2",
 		},
 	}, {
-		.base	= S5PC100_GPJ3_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ3(0),
 			.ngpio	= S5PC100_GPIO_J3_NR,
 			.label	= "GPJ3",
 		},
 	}, {
-		.base	= S5PC100_GPJ4_BASE,
-		.config	= &gpio_cfg,
 		.chip	= {
 			.base	= S5PC100_GPJ4(0),
 			.ngpio	= S5PC100_GPIO_J4_NR,
 			.label	= "GPJ4",
 		},
 	}, {
-		.base	= S5PC100_GPK0_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK0(0),
@@ -314,7 +233,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK0",
 		},
 	}, {
-		.base	= S5PC100_GPK1_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK1(0),
@@ -322,7 +240,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK1",
 		},
 	}, {
-		.base	= S5PC100_GPK2_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK2(0),
@@ -330,7 +247,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK2",
 		},
 	}, {
-		.base	= S5PC100_GPK3_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPK3(0),
@@ -338,7 +254,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPK3",
 		},
 	}, {
-		.base	= S5PC100_GPL0_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL0(0),
@@ -346,7 +261,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL0",
 		},
 	}, {
-		.base	= S5PC100_GPL1_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL1(0),
@@ -354,7 +268,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL1",
 		},
 	}, {
-		.base	= S5PC100_GPL2_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL2(0),
@@ -362,7 +275,6 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL2",
 		},
 	}, {
-		.base	= S5PC100_GPL3_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL3(0),
@@ -370,56 +282,72 @@ static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
 			.label	= "GPL3",
 		},
 	}, {
-		.base	= S5PC100_GPL4_BASE,
 		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PC100_GPL4(0),
 			.ngpio	= S5PC100_GPIO_L4_NR,
 			.label	= "GPL4",
 		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC00),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(0),
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC20),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(8),
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC40),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(16),
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
+	}, {
+		.base	= (S5P_VA_GPIO + 0xC60),
+		.config	= &gpio_cfg_eint,
+		.irq_base = IRQ_EINT(24),
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
+		},
 	},
 };
 
-/* FIXME move from irq-gpio.c */
-extern struct irq_chip s5pc100_gpioint;
-extern void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
-
-static __init void s5pc100_gpiolib_link(struct s3c_gpio_chip *chip)
+static __init int s5pc100_gpiolib_init(void)
 {
-	/* Interrupt */
-	if (chip->config == &gpio_cfg) {
-		int i, irq;
-
-		chip->chip.to_irq = s5pc100_gpiolib_to_irq;
+	struct s3c_gpio_chip *chip = s5pc100_gpio_chips;
+	int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+	int gpioint_group = 0;
+	int i;
 
-		for (i = 0;  i < chip->chip.ngpio; i++) {
-			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
-			set_irq_chip(irq, &s5pc100_gpioint);
-			set_irq_data(irq, &chip->chip);
-			set_irq_handler(irq, handle_level_irq);
-			set_irq_flags(irq, IRQF_VALID);
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL) {
+			chip->config = &gpio_cfg;
+			chip->group = gpioint_group++;
 		}
-	} else if (chip->config == &gpio_cfg_eint) {
-		chip->chip.to_irq = s5pc100_gpiolib_to_eint;
+		if (chip->base == NULL)
+			chip->base = S5PC100_BANK_BASE(i);
 	}
-}
-
-static __init int s5pc100_gpiolib_init(void)
-{
-	struct s3c_gpio_chip *chip;
-	int nr_chips;
-
-	chip = s5pc100_gpio_chips;
-	nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
-
-	for (; nr_chips > 0; nr_chips--, chip++)
-		s5pc100_gpiolib_link(chip);
-
-	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips,
-				       ARRAY_SIZE(s5pc100_gpio_chips));
 
-	/* Interrupt */
-	set_irq_chained_handler(IRQ_GPIOINT, s5pc100_irq_gpioint_handler);
+	samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips);
 
 	return 0;
 }

arch/arm/mach-s5pc100/include/mach/gpio.h

@@ -146,13 +146,6 @@ enum s5p_gpio_number {
 /* define the number of gpios we need to the one after the MP04() range */
 #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
-#define EINT_MODE		S3C_GPIO_SFN(0x2)
-
-#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
-#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
-#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
-#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
-
 #include <asm-generic/gpio.h>
 
 #endif /* __ASM_ARCH_GPIO_H */

arch/arm/mach-s5pc100/include/mach/irqs.h

@@ -48,8 +48,8 @@
 #define IRQ_SPI1		S5P_IRQ_VIC1(16)
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_CAN0		S5P_IRQ_VIC1(19)
-#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2		S5P_IRQ_VIC1(19)
+#define IRQ_IIC3		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -100,11 +100,12 @@
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
-#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
-#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR	21
 
-/* Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs */
-#define NR_IRQS		(S3C_IRQ_GPIO(320) + 1)
+/* Set the default NR_IRQS */
+#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
 
 /* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0

arch/arm/mach-s5pc100/include/mach/map.h

@@ -110,6 +110,8 @@
 #define S5PC100_PA_PCM0		0xF2400000
 #define S5PC100_PA_PCM1		0xF2500000
 
+#define S5PC100_PA_SPDIF	0xF2600000
+
 #define S5PC100_PA_TSADC	(0xF3000000)
 
 /* KEYPAD */

arch/arm/mach-s5pc100/include/mach/regs-gpio.h

@@ -11,43 +11,6 @@
 
 #include <mach/map.h>
 
-/* S5PC100 */
-#define S5PC100_GPIO_BASE	S5P_VA_GPIO
-#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
-#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
-#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
-#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
-#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
-#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
-#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
-#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
-#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
-#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
-#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
-#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
-#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
-#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
-#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
-#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
-#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
-#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
-#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
-#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
-#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
-#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
-#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
-#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
-#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
-#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
-#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
-#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
-#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
-#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
-#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
-#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
-#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
-#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
-
 #define S5PC100EINT30CON		(S5P_VA_GPIO + 0xE00)
 #define S5P_EINT_CON(x)			(S5PC100EINT30CON + ((x) * 0x4))
 
@@ -64,12 +27,12 @@
 
 #define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
 
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV		(0x00)
-#define S5P_EXTINT_HILEV		(0x01)
-#define S5P_EXTINT_FALLEDGE		(0x02)
-#define S5P_EXTINT_RISEEDGE		(0x03)
-#define S5P_EXTINT_BOTHEDGE		(0x04)
+#define EINT_MODE		S3C_GPIO_SFN(0x2)
+
+#define EINT_GPIO_0(x)		S5PC100_GPH0(x)
+#define EINT_GPIO_1(x)		S5PC100_GPH1(x)
+#define EINT_GPIO_2(x)		S5PC100_GPH2(x)
+#define EINT_GPIO_3(x)		S5PC100_GPH3(x)
 
 #endif /* __ASM_MACH_S5PC100_REGS_GPIO_H */
 

arch/arm/mach-s5pc100/include/mach/vmalloc.h

@@ -12,6 +12,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END	  (0xe0000000UL)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s5pc100/irq-gpio.c

@@ -1,266 +0,0 @@
-/*
- * arch/arm/mach-s5pc100/irq-gpio.c
- *
- * Copyright (C) 2009 Samsung Electronics
- *
- * S5PC100 - Interrupt handling for IRQ_GPIO${group}(x)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <plat/gpio-cfg.h>
-
-#define S5P_GPIOREG(x)		(S5P_VA_GPIO + (x))
-
-#define CON_OFFSET			0x700
-#define MASK_OFFSET			0x900
-#define PEND_OFFSET			0xA00
-#define CON_OFFSET_2			0xE00
-#define MASK_OFFSET_2			0xF00
-#define PEND_OFFSET_2			0xF40
-
-#define GPIOINT_LEVEL_LOW		0x0
-#define GPIOINT_LEVEL_HIGH		0x1
-#define GPIOINT_EDGE_FALLING		0x2
-#define GPIOINT_EDGE_RISING		0x3
-#define GPIOINT_EDGE_BOTH		0x4
-
-static int group_to_con_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_mask_offset(int group)
-{
-	return group << 2;
-}
-
-static int group_to_pend_offset(int group)
-{
-	return group << 2;
-}
-
-static int s5pc100_get_start(unsigned int group)
-{
-	switch (group) {
-	case 0: return S5PC100_GPIO_A0_START;
-	case 1: return S5PC100_GPIO_A1_START;
-	case 2: return S5PC100_GPIO_B_START;
-	case 3: return S5PC100_GPIO_C_START;
-	case 4: return S5PC100_GPIO_D_START;
-	case 5: return S5PC100_GPIO_E0_START;
-	case 6: return S5PC100_GPIO_E1_START;
-	case 7: return S5PC100_GPIO_F0_START;
-	case 8: return S5PC100_GPIO_F1_START;
-	case 9: return S5PC100_GPIO_F2_START;
-	case 10: return S5PC100_GPIO_F3_START;
-	case 11: return S5PC100_GPIO_G0_START;
-	case 12: return S5PC100_GPIO_G1_START;
-	case 13: return S5PC100_GPIO_G2_START;
-	case 14: return S5PC100_GPIO_G3_START;
-	case 15: return S5PC100_GPIO_I_START;
-	case 16: return S5PC100_GPIO_J0_START;
-	case 17: return S5PC100_GPIO_J1_START;
-	case 18: return S5PC100_GPIO_J2_START;
-	case 19: return S5PC100_GPIO_J3_START;
-	case 20: return S5PC100_GPIO_J4_START;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc100_get_group(unsigned int irq)
-{
-	irq -= S3C_IRQ_GPIO(0);
-
-	switch (irq) {
-	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
-		return 0;
-	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
-		return 1;
-	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
-		return 2;
-	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
-		return 3;
-	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
-		return 4;
-	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
-		return 5;
-	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
-		return 6;
-	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
-		return 7;
-	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
-		return 8;
-	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
-		return 9;
-	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
-		return 10;
-	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
-		return 11;
-	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
-		return 12;
-	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
-		return 13;
-	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
-		return 14;
-	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
-		return 15;
-	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
-		return 16;
-	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
-		return 17;
-	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
-		return 18;
-	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
-		return 19;
-	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
-		return 20;
-	default:
-		BUG();
-	}
-
-	return -EINVAL;
-}
-
-static int s5pc100_get_offset(unsigned int irq)
-{
-	struct gpio_chip *chip = get_irq_data(irq);
-	return irq - S3C_IRQ_GPIO(chip->base);
-}
-
-static void s5pc100_gpioint_ack(unsigned int irq)
-{
-	int group, offset, pend_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	pend_offset = group_to_pend_offset(group);
-
-	value = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-}
-
-static void s5pc100_gpioint_mask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-	value |= 1 << offset;
-	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_unmask(unsigned int irq)
-{
-	int group, offset, mask_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	mask_offset = group_to_mask_offset(group);
-
-	value = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-	value &= ~(1 << offset);
-	__raw_writel(value, S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-}
-
-static void s5pc100_gpioint_mask_ack(unsigned int irq)
-{
-	s5pc100_gpioint_mask(irq);
-	s5pc100_gpioint_ack(irq);
-}
-
-static int s5pc100_gpioint_set_type(unsigned int irq, unsigned int type)
-{
-	int group, offset, con_offset;
-	unsigned int value;
-
-	group = s5pc100_get_group(irq);
-	offset = s5pc100_get_offset(irq);
-	con_offset = group_to_con_offset(group);
-
-	switch (type) {
-	case IRQ_TYPE_NONE:
-		printk(KERN_WARNING "No irq type\n");
-		return -EINVAL;
-	case IRQ_TYPE_EDGE_RISING:
-		type = GPIOINT_EDGE_RISING;
-		break;
-	case IRQ_TYPE_EDGE_FALLING:
-		type = GPIOINT_EDGE_FALLING;
-		break;
-	case IRQ_TYPE_EDGE_BOTH:
-		type = GPIOINT_EDGE_BOTH;
-		break;
-	case IRQ_TYPE_LEVEL_HIGH:
-		type = GPIOINT_LEVEL_HIGH;
-		break;
-	case IRQ_TYPE_LEVEL_LOW:
-		type = GPIOINT_LEVEL_LOW;
-		break;
-	default:
-		BUG();
-	}
-
-
-	value = __raw_readl(S5P_GPIOREG(CON_OFFSET) + con_offset);
-	value &= ~(0xf << (offset * 0x4));
-	value |= (type << (offset * 0x4));
-	__raw_writel(value, S5P_GPIOREG(CON_OFFSET) + con_offset);
-
-	return 0;
-}
-
-struct irq_chip s5pc100_gpioint = {
-	.name		= "GPIO",
-	.ack		= s5pc100_gpioint_ack,
-	.mask		= s5pc100_gpioint_mask,
-	.mask_ack	= s5pc100_gpioint_mask_ack,
-	.unmask		= s5pc100_gpioint_unmask,
-	.set_type	= s5pc100_gpioint_set_type,
-};
-
-void s5pc100_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
-{
-	int group, offset, pend_offset, mask_offset;
-	int real_irq, group_end;
-	unsigned int pend, mask;
-
-	group_end = 21;
-
-	for (group = 0; group < group_end; group++) {
-		pend_offset = group_to_pend_offset(group);
-		pend = __raw_readl(S5P_GPIOREG(PEND_OFFSET) + pend_offset);
-		if (!pend)
-			continue;
-
-		mask_offset = group_to_mask_offset(group);
-		mask = __raw_readl(S5P_GPIOREG(MASK_OFFSET) + mask_offset);
-		pend &= ~mask;
-
-		for (offset = 0; offset < 8; offset++) {
-			if (pend & (1 << offset)) {
-				real_irq = s5pc100_get_start(group) + offset;
-				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
-			}
-		}
-	}
-}

arch/arm/mach-s5pc100/mach-smdkc100.c

@@ -47,6 +47,7 @@
 #include <plat/adc.h>
 #include <plat/keypad.h>
 #include <plat/ts.h>
+#include <plat/audio.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC100_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -196,6 +197,7 @@ static struct platform_device *smdkc100_devices[] __initdata = {
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
+	&s5pc100_device_spdif,
 };
 
 static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = {
@@ -226,6 +228,8 @@ static void __init smdkc100_machine_init(void)
 
 	samsung_keypad_set_platdata(&smdkc100_keypad_data);
 
+	s5pc100_spdif_setup_gpio(S5PC100_SPDIF_GPD);
+
 	/* LCD init */
 	gpio_request(S5PC100_GPD(0), "GPD");
 	gpio_request(S5PC100_GPH0(6), "GPH0");

arch/arm/mach-s5pc100/setup-fb-24bpp.c

@@ -22,27 +22,15 @@
 
 #define DISR_OFFSET	0x7008
 
-void s5pc100_fb_gpio_setup_24bpp(void)
+static void s5pc100_fb_setgpios(unsigned int base, unsigned int nr)
 {
-	unsigned int gpio = 0;
-
-	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
-
-	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(2));
+}
 
-	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	s5pc100_fb_setgpios(S5PC100_GPF0(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF1(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF2(0), 8);
+	s5pc100_fb_setgpios(S5PC100_GPF3(0), 4);
 }

arch/arm/mach-s5pc100/setup-i2c0.c

@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PC100_GPD(3), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }

arch/arm/mach-s5pc100/setup-i2c1.c

@@ -23,8 +23,6 @@ struct platform_device; /* don't need the contents */
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
-	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
-	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgall_range(S5PC100_GPD(5), 2,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
 }

arch/arm/mach-s5pc100/setup-ide.c

@@ -17,52 +17,39 @@
 #include <mach/regs-clock.h>
 #include <plat/gpio-cfg.h>
 
+static void s5pc100_ide_cfg_gpios(unsigned int base, unsigned int nr)
+{
+	s3c_gpio_cfgrange_nopull(base, nr, S3C_GPIO_SFN(4));
+
+	for (; nr > 0; nr--, base++)
+		s5p_gpio_set_drvstr(base, S5P_GPIO_DRVSTR_LV4);
+}
+
 void s5pc100_ide_setup_gpio(void)
 {
 	u32 reg;
-	u32 gpio = 0;
 
 	/* Independent CF interface, CF chip select configuration */
 	reg = readl(S5PC100_MEM_SYS_CFG) & (~0x3f);
 	writel(reg | MEM_SYS_CFG_EBI_FIX_PRI_CFCON, S5PC100_MEM_SYS_CFG);
 
 	/* CF_Add[0 - 2], CF_IORDY, CF_INTRQ, CF_DMARQ, CF_DMARST, CF_DMACK */
-	for (gpio = S5PC100_GPJ0(0); gpio <= S5PC100_GPJ0(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ0(0), 8);
 
 	/*CF_Data[0 - 7] */
-	for (gpio = S5PC100_GPJ2(0); gpio <= S5PC100_GPJ2(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ2(0), 8);
 
 	/* CF_Data[8 - 15] */
-	for (gpio = S5PC100_GPJ3(0); gpio <= S5PC100_GPJ3(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ3(0), 8);
 
 	/* CF_CS0, CF_CS1, CF_IORD, CF_IOWR */
-	for (gpio = S5PC100_GPJ4(0); gpio <= S5PC100_GPJ4(3); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(4));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
-	}
+	s5pc100_ide_cfg_gpios(S5PC100_GPJ4(0), 4);
 
 	/* EBI_OE, EBI_WE */
-	for (gpio = S5PC100_GPK0(6); gpio <= S5PC100_GPK0(7); gpio++)
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0));
+	s3c_gpio_cfgpin_range(S5PC100_GPK0(6), 2, S3C_GPIO_SFN(0));
 
 	/* CF_OE, CF_WE */
-	for (gpio = S5PC100_GPK1(6); gpio <= S5PC100_GPK1(7); gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPK1(6), 8, S3C_GPIO_SFN(2));
 
 	/* CF_CD */
 	s3c_gpio_cfgpin(S5PC100_GPK3(5), S3C_GPIO_SFN(2));

arch/arm/mach-s5pc100/setup-keypad.c

@@ -15,20 +15,9 @@
 
 void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 {
-	unsigned int gpio;
-	unsigned int end;
-
 	/* Set all the necessary GPH3 pins to special-function 3: KP_ROW[x] */
-	end = S5PC100_GPH3(rows);
-	for (gpio = S5PC100_GPH3(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPH3(0), rows, S3C_GPIO_SFN(3));
 
 	/* Set all the necessary GPH2 pins to special-function 3: KP_COL[x] */
-	end = S5PC100_GPH2(cols);
-	for (gpio = S5PC100_GPH2(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPH2(0), cols, S3C_GPIO_SFN(3));
 }

arch/arm/mach-s5pc100/setup-sdhci-gpio.c

@@ -25,8 +25,6 @@
 void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
 	unsigned int num;
 
 	num = width;
@@ -34,20 +32,11 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 	if (width == 8)
 		num = width - 2;
 
-	end = S5PC100_GPG0(2 + num);
-
 	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
-	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPG0(0), 2 + num, S3C_GPIO_SFN(2));
 
-	if (width == 8) {
-		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
-			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-		}
-	}
+	if (width == 8)
+		s3c_gpio_cfgrange_nopull(S5PC100_GPG1(0), 2, S3C_GPIO_SFN(2));
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
@@ -58,16 +47,9 @@ void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
 void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG2(2 + width);
 
 	/* Set all the necessary GPG2 pins to special-function 2 */
-	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPG2(0), 2 + width, S3C_GPIO_SFN(2));
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
@@ -78,16 +60,9 @@ void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
 {
 	struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
-	unsigned int gpio;
-	unsigned int end;
-
-	end = S5PC100_GPG3(2 + width);
 
 	/* Set all the necessary GPG3 pins to special-function 2 */
-	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
-		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	}
+	s3c_gpio_cfgrange_nopull(S5PC100_GPG3(0), 2 + width, S3C_GPIO_SFN(2));
 
 	if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
 		s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);

arch/arm/mach-s5pv210/Kconfig

@@ -11,9 +11,9 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
-	select PLAT_S5P
 	select S3C_PL330_DMA
 	select S5P_EXT_INT
+	select S5PV210_PM if PM
 	help
 	  Enable S5PV210 CPU support
 
@@ -58,7 +58,6 @@ menu "S5PC110 Machines"
 config MACH_AQUILA
 	bool "Aquila"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
 	select S3C_DEV_FB
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -75,7 +74,7 @@ config MACH_AQUILA
 config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
+	select S5P_GPIO_INT
 	select S3C_DEV_FB
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
@@ -83,8 +82,15 @@ config MACH_GONI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_ONENAND
+	select SAMSUNG_DEV_KEYPAD
 	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
 	help
 	  Machine support for Samsung GONI board
@@ -93,7 +99,6 @@ config MACH_GONI
 config MACH_SMDKC110
 	bool "SMDKC110"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
@@ -113,7 +118,6 @@ menu "S5PV210 Machines"
 config MACH_SMDKV210
 	bool "SMDKV210"
 	select CPU_S5PV210
-	select ARCH_SPARSEMEM_ENABLE
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
@@ -134,6 +138,29 @@ config MACH_SMDKV210
 	help
 	  Machine support for Samsung SMDKV210
 
+config MACH_TORBRECK
+	bool "Torbreck"
+	select CPU_S5PV210
+	select ARCH_SPARSEMEM_ENABLE
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C2
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_SDHCI
+	help
+	  Machine support for aESOP Torbreck
+
 endmenu
 
+config S5PV210_PM
+	bool
+	help
+	  Power Management code common to S5PV210
+
 endif

arch/arm/mach-s5pv210/Makefile

@@ -14,6 +14,8 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PV210)	+= cpu.o init.o clock.o dma.o gpiolib.o
 obj-$(CONFIG_CPU_S5PV210)	+= setup-i2c0.o
+obj-$(CONFIG_S5PV210_PM)	+= pm.o sleep.o
+obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
 
 # machine support
 
@@ -21,6 +23,7 @@ obj-$(CONFIG_MACH_AQUILA)	+= mach-aquila.o
 obj-$(CONFIG_MACH_SMDKV210)	+= mach-smdkv210.o
 obj-$(CONFIG_MACH_SMDKC110)	+= mach-smdkc110.o
 obj-$(CONFIG_MACH_GONI)		+= mach-goni.o
+obj-$(CONFIG_MACH_TORBRECK)	+= mach-torbreck.o
 
 # device support
 

arch/arm/mach-s5pv210/clock.c

@@ -31,6 +31,8 @@
 #include <plat/clock-clksrc.h>
 #include <plat/s5pv210.h>
 
+static unsigned long xtal;
+
 static struct clksrc_clk clk_mout_apll = {
 	.clk	= {
 		.name		= "mout_apll",
@@ -259,6 +261,36 @@ static struct clksrc_clk clk_sclk_vpll = {
 	.reg_src	= { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 },
 };
 
+static struct clk *clkset_moutdmc0src_list[] = {
+	[0] = &clk_sclk_a2m.clk,
+	[1] = &clk_mout_mpll.clk,
+	[2] = NULL,
+	[3] = NULL,
+};
+
+static struct clksrc_sources clkset_moutdmc0src = {
+	.sources	= clkset_moutdmc0src_list,
+	.nr_sources	= ARRAY_SIZE(clkset_moutdmc0src_list),
+};
+
+static struct clksrc_clk clk_mout_dmc0 = {
+	.clk	= {
+		.name		= "mout_dmc0",
+		.id		= -1,
+	},
+	.sources	= &clkset_moutdmc0src,
+	.reg_src	= { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 },
+};
+
+static struct clksrc_clk clk_sclk_dmc0 = {
+	.clk	= {
+		.name		= "sclk_dmc0",
+		.id		= -1,
+		.parent		= &clk_mout_dmc0.clk,
+	},
+	.reg_div	= { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 },
+};
+
 static unsigned long s5pv210_clk_imem_get_rate(struct clk *clk)
 {
 	return clk_get_rate(clk->parent) / 2;
@@ -268,8 +300,29 @@ static struct clk_ops clk_hclk_imem_ops = {
 	.get_rate	= s5pv210_clk_imem_get_rate,
 };
 
+static unsigned long s5pv210_clk_fout_apll_get_rate(struct clk *clk)
+{
+	return s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
+}
+
+static struct clk_ops clk_fout_apll_ops = {
+	.get_rate	= s5pv210_clk_fout_apll_get_rate,
+};
+
 static struct clk init_clocks_disable[] = {
 	{
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_hclk_psys.clk,
+		.enable		= s5pv210_clk_ip0_ctrl,
+		.ctrlbit	= (1 << 4),
+	}, {
 		.name		= "rot",
 		.id		= -1,
 		.parent		= &clk_hclk_dsys.clk,
@@ -431,6 +484,12 @@ static struct clk init_clocks_disable[] = {
 		.parent		= &clk_p,
 		.enable		= s5pv210_clk_ip3_ctrl,
 		.ctrlbit	= (1 << 6),
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pv210_clk_ip3_ctrl,
+		.ctrlbit	= (1 << 0),
 	},
 };
 
@@ -660,6 +719,53 @@ static struct clksrc_sources clkset_sclk_spdif = {
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_spdif_list),
 };
 
+static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *pclk;
+	int ret;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	ret = pclk->ops->set_rate(pclk, rate);
+	clk_put(pclk);
+
+	return ret;
+}
+
+static unsigned long s5pv210_spdif_get_rate(struct clk *clk)
+{
+	struct clk *pclk;
+	int rate;
+
+	pclk = clk_get_parent(clk);
+	if (IS_ERR(pclk))
+		return -EINVAL;
+
+	rate = pclk->ops->get_rate(clk);
+	clk_put(pclk);
+
+	return rate;
+}
+
+static struct clk_ops s5pv210_sclk_spdif_ops = {
+	.set_rate	= s5pv210_spdif_set_rate,
+	.get_rate	= s5pv210_spdif_get_rate,
+};
+
+static struct clksrc_clk clk_sclk_spdif = {
+	.clk		= {
+		.name		= "sclk_spdif",
+		.id		= -1,
+		.enable		= s5pv210_clk_mask0_ctrl,
+		.ctrlbit	= (1 << 27),
+		.ops		= &s5pv210_sclk_spdif_ops,
+	},
+	.sources = &clkset_sclk_spdif,
+	.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
+};
+
 static struct clk *clkset_group2_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
@@ -743,15 +849,6 @@ static struct clksrc_clk clksrcs[] = {
 		},
 		.sources = &clkset_sclk_mixer,
 		.reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 },
-	}, {
-		.clk		= {
-			.name		= "sclk_spdif",
-			.id		= -1,
-			.enable		= s5pv210_clk_mask0_ctrl,
-			.ctrlbit	= (1 << 27),
-		},
-		.sources = &clkset_sclk_spdif,
-		.reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 },
 	}, {
 		.clk	= {
 			.name		= "sclk_fimc",
@@ -953,12 +1050,93 @@ static struct clksrc_clk *sysclks[] = {
 	&clk_sclk_dac,
 	&clk_sclk_pixel,
 	&clk_sclk_hdmi,
+	&clk_mout_dmc0,
+	&clk_sclk_dmc0,
+	&clk_sclk_audio0,
+	&clk_sclk_audio1,
+	&clk_sclk_audio2,
+	&clk_sclk_spdif,
+};
+
+static u32 epll_div[][6] = {
+	{  48000000, 0, 48, 3, 3, 0 },
+	{  96000000, 0, 48, 3, 2, 0 },
+	{ 144000000, 1, 72, 3, 2, 0 },
+	{ 192000000, 0, 48, 3, 1, 0 },
+	{ 288000000, 1, 72, 3, 1, 0 },
+	{  32750000, 1, 65, 3, 4, 35127 },
+	{  32768000, 1, 65, 3, 4, 35127 },
+	{  45158400, 0, 45, 3, 3, 10355 },
+	{  45000000, 0, 45, 3, 3, 10355 },
+	{  45158000, 0, 45, 3, 3, 10355 },
+	{  49125000, 0, 49, 3, 3, 9961 },
+	{  49152000, 0, 49, 3, 3, 9961 },
+	{  67737600, 1, 67, 3, 3, 48366 },
+	{  67738000, 1, 67, 3, 3, 48366 },
+	{  73800000, 1, 73, 3, 3, 47710 },
+	{  73728000, 1, 73, 3, 3, 47710 },
+	{  36000000, 1, 32, 3, 4, 0 },
+	{  60000000, 1, 60, 3, 3, 0 },
+	{  72000000, 1, 72, 3, 3, 0 },
+	{  80000000, 1, 80, 3, 3, 0 },
+	{  84000000, 0, 42, 3, 2, 0 },
+	{  50000000, 0, 50, 3, 3, 0 },
+};
+
+static int s5pv210_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned int epll_con, epll_con_k;
+	unsigned int i;
+
+	/* Return if nothing changed */
+	if (clk->rate == rate)
+		return 0;
+
+	epll_con = __raw_readl(S5P_EPLL_CON);
+	epll_con_k = __raw_readl(S5P_EPLL_CON1);
+
+	epll_con_k &= ~PLL46XX_KDIV_MASK;
+	epll_con &= ~(1 << 27 |
+			PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT |
+			PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT |
+			PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+	for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+		if (epll_div[i][0] == rate) {
+			epll_con_k |= epll_div[i][5] << 0;
+			epll_con |= (epll_div[i][1] << 27 |
+					epll_div[i][2] << PLL46XX_MDIV_SHIFT |
+					epll_div[i][3] << PLL46XX_PDIV_SHIFT |
+					epll_div[i][4] << PLL46XX_SDIV_SHIFT);
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(epll_div)) {
+		printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+				__func__);
+		return -EINVAL;
+	}
+
+	__raw_writel(epll_con, S5P_EPLL_CON);
+	__raw_writel(epll_con_k, S5P_EPLL_CON1);
+
+	printk(KERN_WARNING "EPLL Rate changes from %lu to %lu\n",
+			clk->rate, rate);
+
+	clk->rate = rate;
+
+	return 0;
+}
+
+static struct clk_ops s5pv210_epll_ops = {
+	.set_rate = s5pv210_epll_set_rate,
+	.get_rate = s5p_epll_get_rate,
 };
 
 void __init_or_cpufreq s5pv210_setup_clocks(void)
 {
 	struct clk *xtal_clk;
-	unsigned long xtal;
 	unsigned long vpllsrc;
 	unsigned long armclk;
 	unsigned long hclk_msys;
@@ -974,6 +1152,10 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
+	/* Set functions for clk_fout_epll */
+	clk_fout_epll.enable = s5p_epll_enable;
+	clk_fout_epll.ops = &s5pv210_epll_ops;
+
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 
 	clkdiv0 = __raw_readl(S5P_CLK_DIV0);
@@ -992,11 +1174,12 @@ void __init_or_cpufreq s5pv210_setup_clocks(void)
 
 	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508);
 	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502);
-	epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500);
+	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON),
+				__raw_readl(S5P_EPLL_CON1), pll_4600);
 	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 	vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502);
 
-	clk_fout_apll.rate = apll;
+	clk_fout_apll.ops = &clk_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
 	clk_fout_vpll.rate = vpll;

arch/arm/mach-s5pv210/cpu.c

@@ -85,6 +85,21 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S5PV210_PA_SROMC),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC0,
+		.pfn		= __phys_to_pfn(S5PV210_PA_DMC0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_DMC1,
+		.pfn		= __phys_to_pfn(S5PV210_PA_DMC1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		=__phys_to_pfn(S5PV210_PA_HSPHY),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}
 };
 

arch/arm/mach-s5pv210/cpufreq.c

@@ -0,0 +1,484 @@
+/* linux/arch/arm/mach-s5pv210/cpufreq.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * CPU frequency scaling for S5PC110/S5PV210
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+
+static struct clk *cpu_clk;
+static struct clk *dmc0_clk;
+static struct clk *dmc1_clk;
+static struct cpufreq_freqs freqs;
+
+/* APLL M,P,S values for 1G/800Mhz */
+#define APLL_VAL_1000	((1 << 31) | (125 << 16) | (3 << 8) | 1)
+#define APLL_VAL_800	((1 << 31) | (100 << 16) | (3 << 8) | 1)
+
+/*
+ * DRAM configurations to calculate refresh counter for changing
+ * frequency of memory.
+ */
+struct dram_conf {
+	unsigned long freq;	/* HZ */
+	unsigned long refresh;	/* DRAM refresh counter * 1000 */
+};
+
+/* DRAM configuration (DMC0 and DMC1) */
+static struct dram_conf s5pv210_dram_conf[2];
+
+enum perf_level {
+	L0, L1, L2, L3, L4,
+};
+
+enum s5pv210_mem_type {
+	LPDDR	= 0x1,
+	LPDDR2	= 0x2,
+	DDR2	= 0x4,
+};
+
+enum s5pv210_dmc_port {
+	DMC0 = 0,
+	DMC1,
+};
+
+static struct cpufreq_frequency_table s5pv210_freq_table[] = {
+	{L0, 1000*1000},
+	{L1, 800*1000},
+	{L2, 400*1000},
+	{L3, 200*1000},
+	{L4, 100*1000},
+	{0, CPUFREQ_TABLE_END},
+};
+
+static u32 clkdiv_val[5][11] = {
+	/*
+	 * Clock divider value for following
+	 * { APLL, A2M, HCLK_MSYS, PCLK_MSYS,
+	 *   HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS,
+	 *   ONEDRAM, MFC, G3D }
+	 */
+
+	/* L0 : [1000/200/100][166/83][133/66][200/200] */
+	{0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L1 : [800/200/100][166/83][133/66][200/200] */
+	{0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L2 : [400/200/100][166/83][133/66][200/200] */
+	{1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L3 : [200/200/100][166/83][133/66][200/200] */
+	{3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0},
+
+	/* L4 : [100/100/100][83/83][66/66][100/100] */
+	{7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0},
+};
+
+/*
+ * This function set DRAM refresh counter
+ * accoriding to operating frequency of DRAM
+ * ch: DMC port number 0 or 1
+ * freq: Operating frequency of DRAM(KHz)
+ */
+static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
+{
+	unsigned long tmp, tmp1;
+	void __iomem *reg = NULL;
+
+	if (ch == DMC0)
+		reg = (S5P_VA_DMC0 + 0x30);
+	else if (ch == DMC1)
+		reg = (S5P_VA_DMC1 + 0x30);
+	else
+		printk(KERN_ERR "Cannot find DMC port\n");
+
+	/* Find current DRAM frequency */
+	tmp = s5pv210_dram_conf[ch].freq;
+
+	do_div(tmp, freq);
+
+	tmp1 = s5pv210_dram_conf[ch].refresh;
+
+	do_div(tmp1, tmp);
+
+	__raw_writel(tmp1, reg);
+}
+
+int s5pv210_verify_speed(struct cpufreq_policy *policy)
+{
+	if (policy->cpu)
+		return -EINVAL;
+
+	return cpufreq_frequency_table_verify(policy, s5pv210_freq_table);
+}
+
+unsigned int s5pv210_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+
+	return clk_get_rate(cpu_clk) / 1000;
+}
+
+static int s5pv210_target(struct cpufreq_policy *policy,
+			  unsigned int target_freq,
+			  unsigned int relation)
+{
+	unsigned long reg;
+	unsigned int index, priv_index;
+	unsigned int pll_changing = 0;
+	unsigned int bus_speed_changing = 0;
+
+	freqs.old = s5pv210_getspeed(0);
+
+	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+					   target_freq, relation, &index))
+		return -EINVAL;
+
+	freqs.new = s5pv210_freq_table[index].frequency;
+	freqs.cpu = 0;
+
+	if (freqs.new == freqs.old)
+		return 0;
+
+	/* Finding current running level index */
+	if (cpufreq_frequency_table_target(policy, s5pv210_freq_table,
+					   freqs.old, relation, &priv_index))
+		return -EINVAL;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	if (freqs.new > freqs.old) {
+		/* Voltage up: will be implemented */
+	}
+
+	/* Check if there need to change PLL */
+	if ((index == L0) || (priv_index == L0))
+		pll_changing = 1;
+
+	/* Check if there need to change System bus clock */
+	if ((index == L4) || (priv_index == L4))
+		bus_speed_changing = 1;
+
+	if (bus_speed_changing) {
+		/*
+		 * Reconfigure DRAM refresh counter value for minimum
+		 * temporary clock while changing divider.
+		 * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287
+		 */
+		if (pll_changing)
+			s5pv210_set_refresh(DMC1, 83000);
+		else
+			s5pv210_set_refresh(DMC1, 100000);
+
+		s5pv210_set_refresh(DMC0, 83000);
+	}
+
+	/*
+	 * APLL should be changed in this level
+	 * APLL -> MPLL(for stable transition) -> APLL
+	 * Some clock source's clock API are not prepared.
+	 * Do not use clock API in below code.
+	 */
+	if (pll_changing) {
+		/*
+		 * 1. Temporary Change divider for MFC and G3D
+		 * SCLKA2M(200/1=200)->(200/4=50)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) |
+			(3 << S5P_CLKDIV2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = __raw_readl(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/*
+		 * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX
+		 * (200/4=50)->(667/4=166)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) |
+			(1 << S5P_CLKSRC2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 3. DMC1 refresh count for 133Mhz if (index == L4) is
+		 * true refresh counter is already programed in upper
+		 * code. 0x287@83Mhz
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 133000);
+
+		/* 4. SCLKAPLL -> SCLKMPLL */
+		reg = __raw_readl(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+	}
+
+	/* Change divider */
+	reg = __raw_readl(S5P_CLK_DIV0);
+
+	reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK |
+		S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK |
+		S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK |
+		S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK);
+
+	reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) |
+		(clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) |
+		(clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) |
+		(clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) |
+		(clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) |
+		(clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) |
+		(clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) |
+		(clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT));
+
+	__raw_writel(reg, S5P_CLK_DIV0);
+
+	do {
+		reg = __raw_readl(S5P_CLKDIV_STAT0);
+	} while (reg & 0xff);
+
+	/* ARM MCS value changed */
+	reg = __raw_readl(S5P_ARM_MCS_CON);
+	reg &= ~0x3;
+	if (index >= L3)
+		reg |= 0x3;
+	else
+		reg |= 0x1;
+
+	__raw_writel(reg, S5P_ARM_MCS_CON);
+
+	if (pll_changing) {
+		/* 5. Set Lock time = 30us*24Mhz = 0x2cf */
+		__raw_writel(0x2cf, S5P_APLL_LOCK);
+
+		/*
+		 * 6. Turn on APLL
+		 * 6-1. Set PMS values
+		 * 6-2. Wait untile the PLL is locked
+		 */
+		if (index == L0)
+			__raw_writel(APLL_VAL_1000, S5P_APLL_CON);
+		else
+			__raw_writel(APLL_VAL_800, S5P_APLL_CON);
+
+		do {
+			reg = __raw_readl(S5P_APLL_CON);
+		} while (!(reg & (0x1 << 29)));
+
+		/*
+		 * 7. Change souce clock from SCLKMPLL(667Mhz)
+		 * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX
+		 * (667/4=166)->(200/4=50)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_SRC2);
+		reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK);
+		reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) |
+			(0 << S5P_CLKSRC2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC2);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT1);
+		} while (reg & ((1 << 7) | (1 << 3)));
+
+		/*
+		 * 8. Change divider for MFC and G3D
+		 * (200/4=50)->(200/1=200)Mhz
+		 */
+		reg = __raw_readl(S5P_CLK_DIV2);
+		reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK);
+		reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) |
+			(clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT);
+		__raw_writel(reg, S5P_CLK_DIV2);
+
+		/* For MFC, G3D dividing */
+		do {
+			reg = __raw_readl(S5P_CLKDIV_STAT0);
+		} while (reg & ((1 << 16) | (1 << 17)));
+
+		/* 9. Change MPLL to APLL in MSYS_MUX */
+		reg = __raw_readl(S5P_CLK_SRC0);
+		reg &= ~(S5P_CLKSRC0_MUX200_MASK);
+		reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT);
+		__raw_writel(reg, S5P_CLK_SRC0);
+
+		do {
+			reg = __raw_readl(S5P_CLKMUX_STAT0);
+		} while (reg & (0x1 << 18));
+
+		/*
+		 * 10. DMC1 refresh counter
+		 * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c
+		 * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618
+		 */
+		if (!bus_speed_changing)
+			s5pv210_set_refresh(DMC1, 200000);
+	}
+
+	/*
+	 * L4 level need to change memory bus speed, hence onedram clock divier
+	 * and memory refresh parameter should be changed
+	 */
+	if (bus_speed_changing) {
+		reg = __raw_readl(S5P_CLK_DIV6);
+		reg &= ~S5P_CLKDIV6_ONEDRAM_MASK;
+		reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT);
+		__raw_writel(reg, S5P_CLK_DIV6);
+
+		do {
+			reg = __raw_readl(S5P_CLKDIV_STAT1);
+		} while (reg & (1 << 15));
+
+		/* Reconfigure DRAM refresh counter value */
+		if (index != L4) {
+			/*
+			 * DMC0 : 166Mhz
+			 * DMC1 : 200Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 166000);
+			s5pv210_set_refresh(DMC1, 200000);
+		} else {
+			/*
+			 * DMC0 : 83Mhz
+			 * DMC1 : 100Mhz
+			 */
+			s5pv210_set_refresh(DMC0, 83000);
+			s5pv210_set_refresh(DMC1, 100000);
+		}
+	}
+
+	if (freqs.new < freqs.old) {
+		/* Voltage down: will be implemented */
+	}
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	printk(KERN_DEBUG "Perf changed[L%d]\n", index);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy,
+				   pm_message_t pmsg)
+{
+	return 0;
+}
+
+static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy)
+{
+	return 0;
+}
+#endif
+
+static int check_mem_type(void __iomem *dmc_reg)
+{
+	unsigned long val;
+
+	val = __raw_readl(dmc_reg + 0x4);
+	val = (val & (0xf << 8));
+
+	return val >> 8;
+}
+
+static int __init s5pv210_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned long mem_type;
+
+	cpu_clk = clk_get(NULL, "armclk");
+	if (IS_ERR(cpu_clk))
+		return PTR_ERR(cpu_clk);
+
+	dmc0_clk = clk_get(NULL, "sclk_dmc0");
+	if (IS_ERR(dmc0_clk)) {
+		clk_put(cpu_clk);
+		return PTR_ERR(dmc0_clk);
+	}
+
+	dmc1_clk = clk_get(NULL, "hclk_msys");
+	if (IS_ERR(dmc1_clk)) {
+		clk_put(dmc0_clk);
+		clk_put(cpu_clk);
+		return PTR_ERR(dmc1_clk);
+	}
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/*
+	 * check_mem_type : This driver only support LPDDR & LPDDR2.
+	 * other memory type is not supported.
+	 */
+	mem_type = check_mem_type(S5P_VA_DMC0);
+
+	if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
+		printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+		return -EINVAL;
+	}
+
+	/* Find current refresh counter and frequency each DMC */
+	s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000);
+	s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk);
+
+	s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000);
+	s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk);
+
+	policy->cur = policy->min = policy->max = s5pv210_getspeed(0);
+
+	cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu);
+
+	policy->cpuinfo.transition_latency = 40000;
+
+	return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table);
+}
+
+static struct cpufreq_driver s5pv210_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= s5pv210_verify_speed,
+	.target		= s5pv210_target,
+	.get		= s5pv210_getspeed,
+	.init		= s5pv210_cpu_init,
+	.name		= "s5pv210",
+#ifdef CONFIG_PM
+	.suspend	= s5pv210_cpufreq_suspend,
+	.resume		= s5pv210_cpufreq_resume,
+#endif
+};
+
+static int __init s5pv210_cpufreq_init(void)
+{
+	return cpufreq_register_driver(&s5pv210_driver);
+}
+
+late_initcall(s5pv210_cpufreq_init);

arch/arm/mach-s5pv210/dev-audio.c

@@ -24,29 +24,15 @@ static int s5pv210_cfg_i2s(struct platform_device *pdev)
 	/* configure GPIO for i2s port */
 	switch (pdev->id) {
 	case 1:
-		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(2));
 		break;
 
 	case 2:
-		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(4));
-		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(4));
+		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(4));
 		break;
 
 	case -1:
-		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPI(6), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 7, S3C_GPIO_SFN(2));
 		break;
 
 	default:
@@ -151,25 +137,13 @@ static int s5pv210_pcm_cfg_gpio(struct platform_device *pdev)
 {
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PV210_GPI(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPI(4), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin_range(S5PV210_GPI(0), 5, S3C_GPIO_SFN(3));
 		break;
 	case 1:
-		s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(3));
-		s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(3));
+		s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(3));
 		break;
 	case 2:
-		s3c_gpio_cfgpin(S5PV210_GPC1(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(2), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(3), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPC1(4), S3C_GPIO_SFN(2));
+		s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 5, S3C_GPIO_SFN(2));
 		break;
 	default:
 		printk(KERN_DEBUG "Invalid PCM Controller number!");
@@ -271,13 +245,7 @@ struct platform_device s5pv210_device_pcm2 = {
 
 static int s5pv210_ac97_cfg_gpio(struct platform_device *pdev)
 {
-	s3c_gpio_cfgpin(S5PV210_GPC0(0), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(1), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(2), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(3), S3C_GPIO_SFN(4));
-	s3c_gpio_cfgpin(S5PV210_GPC0(4), S3C_GPIO_SFN(4));
-
-	return 0;
+	return s3c_gpio_cfgpin_range(S5PV210_GPC0(0), 5, S3C_GPIO_SFN(4));
 }
 
 static struct resource s5pv210_ac97_resource[] = {
@@ -325,3 +293,43 @@ struct platform_device s5pv210_device_ac97 = {
 		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
+
+/* S/PDIF Controller platform_device */
+
+static int s5pv210_spdif_cfg_gpio(struct platform_device *pdev)
+{
+	s3c_gpio_cfgpin_range(S5PV210_GPC1(0), 2, S3C_GPIO_SFN(3));
+
+	return 0;
+}
+
+static struct resource s5pv210_spdif_resource[] = {
+	[0] = {
+		.start	= S5PV210_PA_SPDIF,
+		.end	= S5PV210_PA_SPDIF + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= DMACH_SPDIF,
+		.end	= DMACH_SPDIF,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata samsung_spdif_pdata = {
+	.cfg_gpio = s5pv210_spdif_cfg_gpio,
+};
+
+static u64 s5pv210_spdif_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device s5pv210_device_spdif = {
+	.name		= "samsung-spdif",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(s5pv210_spdif_resource),
+	.resource	= s5pv210_spdif_resource,
+	.dev = {
+		.platform_data = &samsung_spdif_pdata,
+		.dma_mask = &s5pv210_spdif_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+};

arch/arm/mach-s5pv210/dev-spi.c

@@ -35,23 +35,15 @@ static char *spi_src_clks[] = {
  */
 static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
 {
+	unsigned int base;
+
 	switch (pdev->id) {
 	case 0:
-		s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(2), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(2), S3C_GPIO_PULL_UP);
+		base = S5PV210_GPB(0);
 		break;
 
 	case 1:
-		s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(2));
-		s3c_gpio_cfgpin(S5PV210_GPB(6), S3C_GPIO_SFN(2));
-		s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
-		s3c_gpio_setpull(S5PV210_GPB(6), S3C_GPIO_PULL_UP);
+		base = S5PV210_GPB(4);
 		break;
 
 	default:
@@ -59,6 +51,9 @@ static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
+	s3c_gpio_cfgall_range(base, 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
 	return 0;
 }
 

arch/arm/mach-s5pv210/dma.c

@@ -82,7 +82,7 @@ static struct s3c_pl330_platdata s5pv210_pdma0_pdata = {
 
 static struct platform_device s5pv210_device_pdma0 = {
 	.name		= "s3c-pl330",
-	.id		= 1,
+	.id		= 0,
 	.num_resources	= ARRAY_SIZE(s5pv210_pdma0_resource),
 	.resource	= s5pv210_pdma0_resource,
 	.dev		= {
@@ -144,7 +144,7 @@ static struct s3c_pl330_platdata s5pv210_pdma1_pdata = {
 
 static struct platform_device s5pv210_device_pdma1 = {
 	.name		= "s3c-pl330",
-	.id		= 2,
+	.id		= 1,
 	.num_resources	= ARRAY_SIZE(s5pv210_pdma1_resource),
 	.resource	= s5pv210_pdma1_resource,
 	.dev		= {

arch/arm/mach-s5pv210/gpiolib.c

@@ -150,6 +150,7 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
 			.label	= "GPG3",
 		},
 	}, {
+		.config	= &gpio_cfg_noint,
 		.chip	= {
 			.base	= S5PV210_GPI(0),
 			.ngpio	= S5PV210_GPIO_I_NR,
@@ -223,34 +224,42 @@ static struct s3c_gpio_chip s5pv210_gpio_4bit[] = {
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC00),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(0),
 		.chip	= {
 			.base	= S5PV210_GPH0(0),
 			.ngpio	= S5PV210_GPIO_H0_NR,
 			.label	= "GPH0",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC20),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(8),
 		.chip	= {
 			.base	= S5PV210_GPH1(0),
 			.ngpio	= S5PV210_GPIO_H1_NR,
 			.label	= "GPH1",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC40),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(16),
 		.chip	= {
 			.base	= S5PV210_GPH2(0),
 			.ngpio	= S5PV210_GPIO_H2_NR,
 			.label	= "GPH2",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	}, {
 		.base	= (S5P_VA_GPIO + 0xC60),
 		.config	= &gpio_cfg_noint,
+		.irq_base = IRQ_EINT(24),
 		.chip	= {
 			.base	= S5PV210_GPH3(0),
 			.ngpio	= S5PV210_GPIO_H3_NR,
 			.label	= "GPH3",
+			.to_irq = samsung_gpiolib_to_irq,
 		},
 	},
 };
@@ -259,11 +268,14 @@ static __init int s5pv210_gpiolib_init(void)
 {
 	struct s3c_gpio_chip *chip = s5pv210_gpio_4bit;
 	int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit);
+	int gpioint_group = 0;
 	int i = 0;
 
 	for (i = 0; i < nr_chips; i++, chip++) {
-		if (chip->config == NULL)
+		if (chip->config == NULL) {
 			chip->config = &gpio_cfg;
+			chip->group = gpioint_group++;
+		}
 		if (chip->base == NULL)
 			chip->base = S5PV210_BANK_BASE(i);
 	}

arch/arm/mach-s5pv210/include/mach/irqs.h

@@ -55,8 +55,8 @@
 #define IRQ_SPI1		S5P_IRQ_VIC1(16)
 #define IRQ_SPI2		S5P_IRQ_VIC1(17)
 #define IRQ_IRDA		S5P_IRQ_VIC1(18)
-#define IRQ_CAN0		S5P_IRQ_VIC1(19)
-#define IRQ_CAN1		S5P_IRQ_VIC1(20)
+#define IRQ_IIC2		S5P_IRQ_VIC1(19)
+#define IRQ_IIC3		S5P_IRQ_VIC1(20)
 #define IRQ_HSIRX		S5P_IRQ_VIC1(21)
 #define IRQ_HSITX		S5P_IRQ_VIC1(22)
 #define IRQ_UHOST		S5P_IRQ_VIC1(23)
@@ -109,7 +109,7 @@
 
 #define IRQ_IPC			S5P_IRQ_VIC3(0)
 #define IRQ_HOSTIF		S5P_IRQ_VIC3(1)
-#define IRQ_MMC3		S5P_IRQ_VIC3(2)
+#define IRQ_HSMMC3		S5P_IRQ_VIC3(2)
 #define IRQ_CEC			S5P_IRQ_VIC3(3)
 #define IRQ_TSI			S5P_IRQ_VIC3(4)
 #define IRQ_MDNIE0		S5P_IRQ_VIC3(5)
@@ -121,8 +121,12 @@
 #define S5P_EINT_BASE1		(S5P_IRQ_VIC0(0))
 #define S5P_EINT_BASE2		(IRQ_VIC_END + 1)
 
+/* GPIO interrupt */
+#define S5P_GPIOINT_BASE	(IRQ_EINT(31) + 1)
+#define S5P_GPIOINT_GROUP_MAXNR	22
+
 /* Set the default NR_IRQS */
-#define NR_IRQS			(IRQ_EINT(31) + 1)
+#define NR_IRQS			(IRQ_EINT(31) + S5P_GPIOINT_COUNT + 1)
 
 /* Compatibility */
 #define IRQ_LCD_FIFO		IRQ_LCD0

arch/arm/mach-s5pv210/include/mach/map.h

@@ -57,6 +57,8 @@
 
 #define S5P_SZ_UART		SZ_256
 
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+
 #define S5PV210_PA_SROMC	(0xE8000000)
 
 #define S5PV210_PA_CFCON	(0xE8200000)
@@ -73,6 +75,9 @@
 
 #define S5PV210_PA_HSMMC(x)	(0xEB000000 + ((x) * 0x100000))
 
+#define S5PV210_PA_HSOTG	(0xEC000000)
+#define S5PV210_PA_HSPHY	(0xEC100000)
+
 #define S5PV210_PA_VIC0		(0xF2000000)
 #define S5PV210_PA_VIC1		(0xF2100000)
 #define S5PV210_PA_VIC2		(0xF2200000)
@@ -81,6 +86,9 @@
 #define S5PV210_PA_SDRAM	(0x20000000)
 #define S5P_PA_SDRAM		S5PV210_PA_SDRAM
 
+/* S/PDIF */
+#define S5PV210_PA_SPDIF	0xE1100000
+
 /* I2S */
 #define S5PV210_PA_IIS0		0xEEE30000
 #define S5PV210_PA_IIS1		0xE2100000
@@ -96,6 +104,9 @@
 
 #define S5PV210_PA_ADC		(0xE1700000)
 
+#define S5PV210_PA_DMC0		(0xF0000000)
+#define S5PV210_PA_DMC1		(0xF1400000)
+
 /* compatibiltiy defines. */
 #define S3C_PA_UART		S5PV210_PA_UART
 #define S3C_PA_HSMMC0		S5PV210_PA_HSMMC(0)
@@ -108,6 +119,7 @@
 #define S3C_PA_FB		S5PV210_PA_FB
 #define S3C_PA_RTC		S5PV210_PA_RTC
 #define S3C_PA_WDT		S5PV210_PA_WATCHDOG
+#define S3C_PA_USB_HSOTG	S5PV210_PA_HSOTG
 #define S5P_PA_FIMC0		S5PV210_PA_FIMC0
 #define S5P_PA_FIMC1		S5PV210_PA_FIMC1
 #define S5P_PA_FIMC2		S5PV210_PA_FIMC2

arch/arm/mach-s5pv210/include/mach/pm-core.h

@@ -0,0 +1,43 @@
+/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+	__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
+	__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+	/* nothing here yet */
+}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+					   struct pm_uart_save *save)
+{
+	/* nothing here yet */
+}

arch/arm/mach-s5pv210/include/mach/regs-clock.h

@@ -25,6 +25,7 @@
 #define S5P_APLL_CON		S5P_CLKREG(0x100)
 #define S5P_MPLL_CON		S5P_CLKREG(0x108)
 #define S5P_EPLL_CON		S5P_CLKREG(0x110)
+#define S5P_EPLL_CON1		S5P_CLKREG(0x114)
 #define S5P_VPLL_CON		S5P_CLKREG(0x120)
 
 #define S5P_CLK_SRC0		S5P_CLKREG(0x200)
@@ -67,11 +68,28 @@
 #define S5P_CLKGATE_BUS1	S5P_CLKREG(0x488)
 #define S5P_CLK_OUT		S5P_CLKREG(0x500)
 
+/* DIV/MUX STATUS */
+#define S5P_CLKDIV_STAT0	S5P_CLKREG(0x1000)
+#define S5P_CLKDIV_STAT1	S5P_CLKREG(0x1004)
+#define S5P_CLKMUX_STAT0	S5P_CLKREG(0x1100)
+#define S5P_CLKMUX_STAT1	S5P_CLKREG(0x1104)
+
 /* CLKSRC0 */
-#define S5P_CLKSRC0_MUX200_MASK		(0x1<<16)
+#define S5P_CLKSRC0_MUX200_SHIFT	(16)
+#define S5P_CLKSRC0_MUX200_MASK		(0x1 << S5P_CLKSRC0_MUX200_SHIFT)
 #define S5P_CLKSRC0_MUX166_MASK		(0x1<<20)
 #define S5P_CLKSRC0_MUX133_MASK		(0x1<<24)
 
+/* CLKSRC2 */
+#define S5P_CLKSRC2_G3D_SHIFT           (0)
+#define S5P_CLKSRC2_G3D_MASK            (0x3 << S5P_CLKSRC2_G3D_SHIFT)
+#define S5P_CLKSRC2_MFC_SHIFT           (4)
+#define S5P_CLKSRC2_MFC_MASK            (0x3 << S5P_CLKSRC2_MFC_SHIFT)
+
+/* CLKSRC6*/
+#define S5P_CLKSRC6_ONEDRAM_SHIFT       (24)
+#define S5P_CLKSRC6_ONEDRAM_MASK        (0x3 << S5P_CLKSRC6_ONEDRAM_SHIFT)
+
 /* CLKDIV0 */
 #define S5P_CLKDIV0_APLL_SHIFT		(0)
 #define S5P_CLKDIV0_APLL_MASK		(0x7 << S5P_CLKDIV0_APLL_SHIFT)
@@ -90,12 +108,24 @@
 #define S5P_CLKDIV0_PCLK66_SHIFT	(28)
 #define S5P_CLKDIV0_PCLK66_MASK		(0x7 << S5P_CLKDIV0_PCLK66_SHIFT)
 
+/* CLKDIV2 */
+#define S5P_CLKDIV2_G3D_SHIFT           (0)
+#define S5P_CLKDIV2_G3D_MASK            (0xF << S5P_CLKDIV2_G3D_SHIFT)
+#define S5P_CLKDIV2_MFC_SHIFT           (4)
+#define S5P_CLKDIV2_MFC_MASK            (0xF << S5P_CLKDIV2_MFC_SHIFT)
+
+/* CLKDIV6 */
+#define S5P_CLKDIV6_ONEDRAM_SHIFT       (28)
+#define S5P_CLKDIV6_ONEDRAM_MASK        (0xF << S5P_CLKDIV6_ONEDRAM_SHIFT)
+
 #define S5P_SWRESET		S5P_CLKREG(0x2000)
 
+#define S5P_ARM_MCS_CON		S5P_CLKREG(0x6100)
+
 /* Registers related to power management */
 #define S5P_PWR_CFG		S5P_CLKREG(0xC000)
 #define S5P_EINT_WAKEUP_MASK	S5P_CLKREG(0xC004)
-#define S5P_WAKEUP_MASK 	S5P_CLKREG(0xC008)
+#define S5P_WAKEUP_MASK		S5P_CLKREG(0xC008)
 #define S5P_PWR_MODE		S5P_CLKREG(0xC00C)
 #define S5P_NORMAL_CFG		S5P_CLKREG(0xC010)
 #define S5P_IDLE_CFG		S5P_CLKREG(0xC020)
@@ -159,8 +189,11 @@
 #define S5P_SLEEP_CFG_USBOSC_EN		(1 << 1)
 
 /* OTHERS Resgister */
+#define S5P_OTHERS_RET_IO		(1 << 31)
+#define S5P_OTHERS_RET_CF		(1 << 30)
+#define S5P_OTHERS_RET_MMC		(1 << 29)
+#define S5P_OTHERS_RET_UART		(1 << 28)
 #define S5P_OTHERS_USB_SIG_MASK		(1 << 16)
-#define S5P_OTHERS_MIPI_DPHY_EN		(1 << 28)
 
 /* MIPI */
 #define S5P_MIPI_DPHY_EN		(3)

arch/arm/mach-s5pv210/include/mach/regs-gpio.h

@@ -31,13 +31,6 @@
 
 #define eint_irq_to_bit(irq)		(1 << (EINT_OFFSET(irq) & 0x7))
 
-/* values for S5P_EXTINT0 */
-#define S5P_EXTINT_LOWLEV		(0x00)
-#define S5P_EXTINT_HILEV		(0x01)
-#define S5P_EXTINT_FALLEDGE		(0x02)
-#define S5P_EXTINT_RISEEDGE		(0x03)
-#define S5P_EXTINT_BOTHEDGE		(0x04)
-
 #define EINT_MODE		S3C_GPIO_SFN(0xf)
 
 #define EINT_GPIO_0(x)		S5PV210_GPH0(x)

arch/arm/mach-s5pv210/include/mach/regs-sys.h

@@ -0,0 +1,19 @@
+/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * S5PV210 - System registers definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PV210_USB_PHY_CON	(S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN	(1 << 0)
+#define S5PV210_USB_PHY1_EN	(1 << 1)
+
+/* compatibility defines for s3c-hsotg driver */
+#define S3C64XX_OTHERS		S5PV210_USB_PHY_CON
+#define S3C64XX_OTHERS_USBMASK	S5PV210_USB_PHY0_EN

arch/arm/mach-s5pv210/include/mach/vmalloc.h

@@ -17,6 +17,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H __FILE__
 
-#define VMALLOC_END	(0xE0000000UL)
+#define VMALLOC_END	0xF6000000UL
 
 #endif /* __ASM_ARCH_VMALLOC_H */

arch/arm/mach-s5pv210/mach-aquila.c

@@ -16,6 +16,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -379,6 +381,119 @@ static struct max8998_platform_data aquila_max8998_pdata = {
 };
 #endif
 
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "DBVDD",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "AVDD2",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "CPVDD",
+	},
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD1",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD2",
+	},
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+	.supply_name	= "VCC_1.8V_PDA",
+	.microvolts	= 1800000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+	.supply_name	= "V_BAT",
+	.microvolts	= 3700000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage0_config,
+	},
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage1_config,
+	},
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+	.constraints	= {
+		.name		= "AVDD1_3.0V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+	.constraints	= {
+		.name		= "DCVDD_1.0V",
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+	/* configure gpio1 function: 0x0001(Logic level input/output) */
+	.gpio_defaults[0] = 0x0001,
+	/* configure gpio3/4/5/7 function for AIF2 voice */
+	.gpio_defaults[2] = 0x8100,
+	.gpio_defaults[3] = 0x8100,
+	.gpio_defaults[4] = 0x8100,
+	.gpio_defaults[6] = 0x0100,
+	/* configure gpio8/9/10/11 function for AIF3 BT */
+	.gpio_defaults[7] = 0x8100,
+	.gpio_defaults[8] = 0x0100,
+	.gpio_defaults[9] = 0x0100,
+	.gpio_defaults[10] = 0x0100,
+	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+};
+
 /* GPIO I2C PMIC */
 #define AP_I2C_GPIO_PMIC_BUS_4	4
 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
@@ -404,6 +519,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
 #endif
 };
 
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5	5
+static struct i2c_gpio_platform_data aquila_i2c_gpio5_data = {
+	.sda_pin	= S5PV210_MP05(3),	/* XM0ADDR_11 */
+	.scl_pin	= S5PV210_MP05(2),	/* XM0ADDR_10 */
+};
+
+static struct platform_device aquila_i2c_gpio5 = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_BUS_5,
+	.dev		= {
+		.platform_data	= &aquila_i2c_gpio5_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+	{
+		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+		I2C_BOARD_INFO("wm8994", 0x1a),
+		.platform_data	= &wm8994_platform_data,
+	},
+};
+
 /* PMIC Power button */
 static struct gpio_keys_button aquila_gpio_keys_table[] = {
 	{
@@ -475,6 +613,7 @@ static void aquila_setup_sdhci(void)
 
 static struct platform_device *aquila_devices[] __initdata = {
 	&aquila_i2c_gpio_pmic,
+	&aquila_i2c_gpio5,
 	&aquila_device_gpiokeys,
 	&s3c_device_fb,
 	&s5p_device_onenand,
@@ -484,8 +623,33 @@ static struct platform_device *aquila_devices[] __initdata = {
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
+	&s5pv210_device_iis0,
+	&wm8994_fixed_voltage0,
+	&wm8994_fixed_voltage1,
 };
 
+static void __init aquila_sound_init(void)
+{
+	unsigned int gpio;
+
+	/* CODEC_XTAL_EN
+	 *
+	 * The Aquila board have a oscillator which provide main clock
+	 * to WM8994 codec. The oscillator provide 24MHz clock to WM8994
+	 * clock. Set gpio setting of "CODEC_XTAL_EN" to enable a oscillator.
+	 * */
+	gpio = S5PV210_GPH3(2);		/* XEINT_26 */
+	gpio_request(gpio, "CODEC_XTAL_EN");
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+
+	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+	 * because it needs 24MHz clock to operate WM8994 codec.
+	 */
+	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
 static void __init aquila_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -506,6 +670,11 @@ static void __init aquila_machine_init(void)
 	s3c_fimc_setname(1, "s5p-fimc");
 	s3c_fimc_setname(2, "s5p-fimc");
 
+	/* SOUND */
+	aquila_sound_init();
+	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+			ARRAY_SIZE(i2c_gpio5_devs));
+
 	/* FB */
 	s3c_fb_set_platdata(&aquila_lcd_pdata);
 

arch/arm/mach-s5pv210/mach-goni.c

@@ -15,7 +15,13 @@
 #include <linux/fb.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
+#include <linux/i2c/qt602240_ts.h>
 #include <linux/mfd/max8998.h>
+#include <linux/mfd/wm8994/pdata.h>
+#include <linux/regulator/fixed.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/lcd.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
@@ -35,7 +41,10 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
 #include <plat/sdhci.h>
+#include <plat/clock.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define GONI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -87,13 +96,12 @@ static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
 /* Frame Buffer */
 static struct s3c_fb_pd_win goni_fb_win0 = {
 	.win_mode = {
-		.pixclock = 1000000000000ULL / ((16+16+2+480)*(28+3+2+800)*55),
 		.left_margin	= 16,
 		.right_margin	= 16,
-		.upper_margin	= 3,
+		.upper_margin	= 2,
 		.lower_margin	= 28,
 		.hsync_len	= 2,
-		.vsync_len	= 2,
+		.vsync_len	= 1,
 		.xres		= 480,
 		.yres		= 800,
 		.refresh	= 55,
@@ -111,9 +119,160 @@ static struct s3c_fb_platdata goni_lcd_pdata __initdata = {
 	.setup_gpio	= s5pv210_fb_gpio_setup_24bpp,
 };
 
+static int lcd_power_on(struct lcd_device *ld, int enable)
+{
+	return 1;
+}
+
+static int reset_lcd(struct lcd_device *ld)
+{
+	static unsigned int first = 1;
+	int reset_gpio = -1;
+
+	reset_gpio = S5PV210_MP05(5);
+
+	if (first) {
+		gpio_request(reset_gpio, "MLCD_RST");
+		first = 0;
+	}
+
+	gpio_direction_output(reset_gpio, 1);
+	return 1;
+}
+
+static struct lcd_platform_data goni_lcd_platform_data = {
+	.reset			= reset_lcd,
+	.power_on		= lcd_power_on,
+	.lcd_enabled		= 0,
+	.reset_delay		= 120,	/* 120ms */
+	.power_on_delay		= 25,	/* 25ms */
+	.power_off_delay	= 200,	/* 200ms */
+};
+
+#define LCD_BUS_NUM	3
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "s6e63m0",
+		.platform_data	= &goni_lcd_platform_data,
+		.max_speed_hz	= 1200000,
+		.bus_num	= LCD_BUS_NUM,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_3,
+		.controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
+	},
+};
+
+static struct spi_gpio_platform_data lcd_spi_gpio_data = {
+	.sck	= S5PV210_MP04(1), /* DISPLAY_CLK */
+	.mosi	= S5PV210_MP04(3), /* DISPLAY_SI */
+	.miso	= SPI_GPIO_NO_MISO,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device goni_spi_gpio = {
+	.name	= "spi_gpio",
+	.id	= LCD_BUS_NUM,
+	.dev	= {
+		.parent		= &s3c_device_fb.dev,
+		.platform_data	= &lcd_spi_gpio_data,
+	},
+};
+
+/* KEYPAD */
+static uint32_t keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(0, 1, KEY_MENU),		/* Send */
+	KEY(0, 2, KEY_BACK),		/* End */
+	KEY(1, 1, KEY_CONFIG),		/* Half shot */
+	KEY(1, 2, KEY_VOLUMEUP),
+	KEY(2, 1, KEY_CAMERA),		/* Full shot */
+	KEY(2, 2, KEY_VOLUMEDOWN),
+};
+
+static struct matrix_keymap_data keymap_data __initdata = {
+	.keymap		= keymap,
+	.keymap_size	= ARRAY_SIZE(keymap),
+};
+
+static struct samsung_keypad_platdata keypad_data __initdata = {
+	.keymap_data	= &keymap_data,
+	.rows		= 3,
+	.cols		= 3,
+};
+
+/* Radio */
+static struct i2c_board_info i2c1_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("si470x", 0x10),
+	},
+};
+
+static void __init goni_radio_init(void)
+{
+	int gpio;
+
+	gpio = S5PV210_GPJ2(4);			/* XMSMDATA_4 */
+	gpio_request(gpio, "FM_INT");
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	i2c1_devs[0].irq = gpio_to_irq(gpio);
+
+	gpio = S5PV210_GPJ2(5);			/* XMSMDATA_5 */
+	gpio_request(gpio, "FM_RST");
+	gpio_direction_output(gpio, 1);
+}
+
+/* TSP */
+static struct qt602240_platform_data qt602240_platform_data = {
+	.x_line		= 17,
+	.y_line		= 11,
+	.x_size		= 800,
+	.y_size		= 480,
+	.blen		= 0x21,
+	.threshold	= 0x28,
+	.voltage	= 2800000,              /* 2.8V */
+	.orient		= QT602240_DIAGONAL,
+};
+
+static struct s3c2410_platform_i2c i2c2_data __initdata = {
+	.flags		= 0,
+	.bus_num	= 2,
+	.slave_addr	= 0x10,
+	.frequency	= 400 * 1000,
+	.sda_delay	= 100,
+};
+
+static struct i2c_board_info i2c2_devs[] __initdata = {
+	{
+		I2C_BOARD_INFO("qt602240_ts", 0x4a),
+		.platform_data = &qt602240_platform_data,
+	},
+};
+
+static void __init goni_tsp_init(void)
+{
+	int gpio;
+
+	gpio = S5PV210_GPJ1(3);		/* XMSMADDR_11 */
+	gpio_request(gpio, "TSP_LDO_ON");
+	gpio_direction_output(gpio, 1);
+	gpio_export(gpio, 0);
+
+	gpio = S5PV210_GPJ0(5);		/* XMSMADDR_5 */
+	gpio_request(gpio, "TSP_INT");
+
+	s5p_register_gpio_interrupt(gpio);
+	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
+	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
+	i2c2_devs[0].irq = gpio_to_irq(gpio);
+}
+
 /* MAX8998 regulators */
 #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
 
+static struct regulator_consumer_supply goni_ldo5_consumers[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
+};
+
 static struct regulator_init_data goni_ldo2_data = {
 	.constraints	= {
 		.name		= "VALIVE_1.1V",
@@ -153,6 +312,8 @@ static struct regulator_init_data goni_ldo5_data = {
 		.max_uV		= 2800000,
 		.apply_uV	= 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(goni_ldo5_consumers),
+	.consumer_supplies = goni_ldo5_consumers,
 };
 
 static struct regulator_init_data goni_ldo6_data = {
@@ -360,6 +521,119 @@ static struct max8998_platform_data goni_max8998_pdata = {
 };
 #endif
 
+static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "DBVDD",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "AVDD2",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "CPVDD",
+	},
+};
+
+static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = {
+	{
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD1",
+	}, {
+		.dev_name	= "5-001a",
+		.supply		= "SPKVDD2",
+	},
+};
+
+static struct regulator_init_data wm8994_fixed_voltage0_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage0_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage0_supplies,
+};
+
+static struct regulator_init_data wm8994_fixed_voltage1_init_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(wm8994_fixed_voltage1_supplies),
+	.consumer_supplies	= wm8994_fixed_voltage1_supplies,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage0_config = {
+	.supply_name	= "VCC_1.8V_PDA",
+	.microvolts	= 1800000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage0_init_data,
+};
+
+static struct fixed_voltage_config wm8994_fixed_voltage1_config = {
+	.supply_name	= "V_BAT",
+	.microvolts	= 3700000,
+	.gpio		= -EINVAL,
+	.init_data	= &wm8994_fixed_voltage1_init_data,
+};
+
+static struct platform_device wm8994_fixed_voltage0 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage0_config,
+	},
+};
+
+static struct platform_device wm8994_fixed_voltage1 = {
+	.name		= "reg-fixed-voltage",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &wm8994_fixed_voltage1_config,
+	},
+};
+
+static struct regulator_consumer_supply wm8994_avdd1_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "AVDD1",
+};
+
+static struct regulator_consumer_supply wm8994_dcvdd_supply = {
+	.dev_name	= "5-001a",
+	.supply		= "DCVDD",
+};
+
+static struct regulator_init_data wm8994_ldo1_data = {
+	.constraints	= {
+		.name		= "AVDD1_3.0V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_avdd1_supply,
+};
+
+static struct regulator_init_data wm8994_ldo2_data = {
+	.constraints	= {
+		.name		= "DCVDD_1.0V",
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &wm8994_dcvdd_supply,
+};
+
+static struct wm8994_pdata wm8994_platform_data = {
+	/* configure gpio1 function: 0x0001(Logic level input/output) */
+	.gpio_defaults[0] = 0x0001,
+	/* configure gpio3/4/5/7 function for AIF2 voice */
+	.gpio_defaults[2] = 0x8100,
+	.gpio_defaults[3] = 0x8100,
+	.gpio_defaults[4] = 0x8100,
+	.gpio_defaults[6] = 0x0100,
+	/* configure gpio8/9/10/11 function for AIF3 BT */
+	.gpio_defaults[7] = 0x8100,
+	.gpio_defaults[8] = 0x0100,
+	.gpio_defaults[9] = 0x0100,
+	.gpio_defaults[10] = 0x0100,
+	.ldo[0]	= { S5PV210_MP03(6), NULL, &wm8994_ldo1_data },	/* XM0FRNB_2 */
+	.ldo[1]	= { 0, NULL, &wm8994_ldo2_data },
+};
+
 /* GPIO I2C PMIC */
 #define AP_I2C_GPIO_PMIC_BUS_4	4
 static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = {
@@ -385,6 +659,29 @@ static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
 #endif
 };
 
+/* GPIO I2C AP 1.8V */
+#define AP_I2C_GPIO_BUS_5	5
+static struct i2c_gpio_platform_data goni_i2c_gpio5_data = {
+	.sda_pin	= S5PV210_MP05(3),	/* XM0ADDR_11 */
+	.scl_pin	= S5PV210_MP05(2),	/* XM0ADDR_10 */
+};
+
+static struct platform_device goni_i2c_gpio5 = {
+	.name		= "i2c-gpio",
+	.id		= AP_I2C_GPIO_BUS_5,
+	.dev		= {
+		.platform_data	= &goni_i2c_gpio5_data,
+	},
+};
+
+static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
+	{
+		/* CS/ADDR = low 0x34 (FYI: high = 0x36) */
+		I2C_BOARD_INFO("wm8994", 0x1a),
+		.platform_data	= &wm8994_platform_data,
+	},
+};
+
 /* PMIC Power button */
 static struct gpio_keys_button goni_gpio_keys_table[] = {
 	{
@@ -444,11 +741,37 @@ static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
 	.ext_cd_gpio_invert	= 1,
 };
 
+static struct regulator_consumer_supply mmc2_supplies[] = {
+	REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
+};
+
+static struct regulator_init_data mmc2_fixed_voltage_init_data = {
+	.constraints		= {
+		.name		= "V_TF_2.8V",
+		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(mmc2_supplies),
+	.consumer_supplies	= mmc2_supplies,
+};
+
+static struct fixed_voltage_config mmc2_fixed_voltage_config = {
+	.supply_name		= "EXT_FLASH_EN",
+	.microvolts		= 2800000,
+	.gpio			= GONI_EXT_FLASH_EN,
+	.enable_high		= true,
+	.init_data		= &mmc2_fixed_voltage_init_data,
+};
+
+static struct platform_device mmc2_fixed_voltage = {
+	.name		= "reg-fixed-voltage",
+	.id		= 2,
+	.dev		= {
+		.platform_data	= &mmc2_fixed_voltage_config,
+	},
+};
+
 static void goni_setup_sdhci(void)
 {
-	gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
-	gpio_direction_output(GONI_EXT_FLASH_EN, 1);
-
 	s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
 	s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
 	s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
@@ -457,7 +780,10 @@ static void goni_setup_sdhci(void)
 static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_fb,
 	&s5p_device_onenand,
+	&goni_spi_gpio,
 	&goni_i2c_gpio_pmic,
+	&goni_i2c_gpio5,
+	&mmc2_fixed_voltage,
 	&goni_device_gpiokeys,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
@@ -465,8 +791,24 @@ static struct platform_device *goni_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
 	&s3c_device_hsmmc2,
+	&s5pv210_device_iis0,
+	&s3c_device_usb_hsotg,
+	&samsung_device_keypad,
+	&s3c_device_i2c1,
+	&s3c_device_i2c2,
+	&wm8994_fixed_voltage0,
+	&wm8994_fixed_voltage1,
 };
 
+static void __init goni_sound_init(void)
+{
+	/* Ths main clock of WM8994 codec uses the output of CLKOUT pin.
+	 * The CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
+	 * because it needs 24MHz clock to operate WM8994 codec.
+	 */
+	__raw_writel(__raw_readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
+}
+
 static void __init goni_map_io(void)
 {
 	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
@@ -476,6 +818,20 @@ static void __init goni_map_io(void)
 
 static void __init goni_machine_init(void)
 {
+	/* Radio: call before I2C 1 registeration */
+	goni_radio_init();
+
+	/* I2C1 */
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
+
+	/* TSP: call before I2C 2 registeration */
+	goni_tsp_init();
+
+	/* I2C2 */
+	s3c_i2c2_set_platdata(&i2c2_data);
+	i2c_register_board_info(2, i2c2_devs, ARRAY_SIZE(i2c2_devs));
+
 	/* PMIC */
 	goni_pmic_init();
 	i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
@@ -483,9 +839,22 @@ static void __init goni_machine_init(void)
 	/* SDHCI */
 	goni_setup_sdhci();
 
+	/* SOUND */
+	goni_sound_init();
+	i2c_register_board_info(AP_I2C_GPIO_BUS_5, i2c_gpio5_devs,
+			ARRAY_SIZE(i2c_gpio5_devs));
+
 	/* FB */
 	s3c_fb_set_platdata(&goni_lcd_pdata);
 
+	/* SPI */
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
+
+	/* KEYPAD */
+	samsung_keypad_set_platdata(&keypad_data);
+
+	clk_xusbxti.rate = 24000000;
+
 	platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
 }
 

arch/arm/mach-s5pv210/mach-smdkc110.c

@@ -28,6 +28,7 @@
 #include <plat/cpu.h>
 #include <plat/ata.h>
 #include <plat/iic.h>
+#include <plat/pm.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKC110_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
@@ -81,6 +82,7 @@ static struct s3c_ide_platdata smdkc110_ide_pdata __initdata = {
 static struct platform_device *smdkc110_devices[] __initdata = {
 	&s5pv210_device_iis0,
 	&s5pv210_device_ac97,
+	&s5pv210_device_spdif,
 	&s3c_device_cfcon,
 	&s3c_device_i2c0,
 	&s3c_device_i2c1,
@@ -110,6 +112,8 @@ static void __init smdkc110_map_io(void)
 
 static void __init smdkc110_machine_init(void)
 {
+	s3c_pm_init();
+
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_i2c2_set_platdata(NULL);