IB/ipath: Fix check for no interrupts to reliably fallback to INTx

Newer HCAs support MSI interrupts and also INTx interrupts.  Fix the
code so that INTx can be reliably enabled if MSI interrupts are not
working.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -138,19 +138,6 @@ static struct pci_driver ipath_driver = {
 	},
 };
 
-static void ipath_check_status(struct work_struct *work)
-{
-	struct ipath_devdata *dd = container_of(work, struct ipath_devdata,
-						status_work.work);
-
-	/*
-	 * If we don't have any interrupts, let the user know and
-	 * don't bother checking again.
-	 */
-	if (dd->ipath_int_counter == 0)
-		dev_err(&dd->pcidev->dev, "No interrupts detected.\n");
-}
-
 static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
 			     u32 *bar0, u32 *bar1)
 {
@@ -218,8 +205,6 @@ static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
 	dd->pcidev = pdev;
 	pci_set_drvdata(pdev, dd);
 
-	INIT_DELAYED_WORK(&dd->status_work, ipath_check_status);
-
 	list_add(&dd->ipath_list, &ipath_dev_list);
 
 bail_unlock:
@@ -620,9 +605,6 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
 	ipath_diag_add(dd);
 	ipath_register_ib_device(dd);
 
-	/* Check that card status in STATUS_TIMEOUT seconds. */
-	schedule_delayed_work(&dd->status_work, HZ * STATUS_TIMEOUT);
-
 	goto bail;
 
 bail_irqsetup:
@@ -753,7 +735,6 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev)
 	 */
 	ipath_shutdown_device(dd);
 
-	cancel_delayed_work(&dd->status_work);
 	flush_scheduled_work();
 
 	if (dd->verbs_dev)
@@ -2195,6 +2176,10 @@ void ipath_shutdown_device(struct ipath_devdata *dd)
 		del_timer_sync(&dd->ipath_stats_timer);
 		dd->ipath_stats_timer_active = 0;
 	}
+	if (dd->ipath_intrchk_timer.data) {
+		del_timer_sync(&dd->ipath_intrchk_timer);
+		dd->ipath_intrchk_timer.data = 0;
+	}
 
 	/*
 	 * clear all interrupts and errors, so that the next time the driver

drivers/infiniband/hw/ipath/ipath_init_chip.c

@@ -665,6 +665,28 @@ done:
 	return ret;
 }
 
+static void verify_interrupt(unsigned long opaque)
+{
+	struct ipath_devdata *dd = (struct ipath_devdata *) opaque;
+
+	if (!dd)
+		return; /* being torn down */
+
+	/*
+	 * If we don't have any interrupts, let the user know and
+	 * don't bother checking again.
+	 */
+	if (dd->ipath_int_counter == 0) {
+		if (!dd->ipath_f_intr_fallback(dd))
+			dev_err(&dd->pcidev->dev, "No interrupts detected, "
+				"not usable.\n");
+		else /* re-arm the timer to see if fallback works */
+			mod_timer(&dd->ipath_intrchk_timer, jiffies + HZ/2);
+	} else
+		ipath_cdbg(VERBOSE, "%u interrupts at timer check\n",
+			dd->ipath_int_counter);
+}
+
 /**
  * ipath_init_chip - do the actual initialization sequence on the chip
  * @dd: the infinipath device
@@ -968,6 +990,20 @@ done:
 					 0ULL);
 			/* chip is usable; mark it as initialized */
 			*dd->ipath_statusp |= IPATH_STATUS_INITTED;
+
+			/*
+			 * setup to verify we get an interrupt, and fallback
+			 * to an alternate if necessary and possible
+			 */
+			if (!reinit) {
+				init_timer(&dd->ipath_intrchk_timer);
+				dd->ipath_intrchk_timer.function =
+					verify_interrupt;
+				dd->ipath_intrchk_timer.data =
+					(unsigned long) dd;
+			}
+			dd->ipath_intrchk_timer.expires = jiffies + HZ/2;
+			add_timer(&dd->ipath_intrchk_timer);
 		} else
 			ipath_dev_err(dd, "No interrupts enabled, couldn't "
 				      "setup interrupt address\n");

drivers/infiniband/hw/ipath/ipath_kernel.h

@@ -426,6 +426,8 @@ struct ipath_devdata {
 	struct class_device *diag_class_dev;
 	/* timer used to prevent stats overflow, error throttling, etc. */
 	struct timer_list ipath_stats_timer;
+	/* timer to verify interrupts work, and fallback if possible */
+	struct timer_list ipath_intrchk_timer;
 	void *ipath_dummy_hdrq;	/* used after port close */
 	dma_addr_t ipath_dummy_hdrq_phys;
 
@@ -629,9 +631,6 @@ struct ipath_devdata {
 	u32 ipath_overrun_thresh_errs;
 	u32 ipath_lli_errs;
 
-	/* status check work */
-	struct delayed_work status_work;
-
 	/*
 	 * Not all devices managed by a driver instance are the same
 	 * type, so these fields must be per-device.