Merge branch 'hwmod_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linus

arch/arm/mach-omap2/Makefile

@@ -5,7 +5,7 @@
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
 
-omap-2-3-common				= irq.o sdrc.o
+omap-2-3-common				= irq.o sdrc.o prm2xxx_3xxx.o
 hwmod-common				= omap_hwmod.o \
 					  omap_hwmod_common_data.o
 prcm-common				= prcm.o powerdomain.o
@@ -15,7 +15,7 @@ clock-common				= clock.o clock_common_data.o \
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
 obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(hwmod-common)
-obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) $(hwmod-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(prcm-common) prm44xx.o $(hwmod-common)
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 

arch/arm/mach-omap2/omap_hwmod.c

@@ -13,10 +13,102 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * This code manages "OMAP modules" (on-chip devices) and their
- * integration with Linux device driver and bus code.
- *
- * References:
+ * Introduction
+ * ------------
+ * One way to view an OMAP SoC is as a collection of largely unrelated
+ * IP blocks connected by interconnects.  The IP blocks include
+ * devices such as ARM processors, audio serial interfaces, UARTs,
+ * etc.  Some of these devices, like the DSP, are created by TI;
+ * others, like the SGX, largely originate from external vendors.  In
+ * TI's documentation, on-chip devices are referred to as "OMAP
+ * modules."  Some of these IP blocks are identical across several
+ * OMAP versions.  Others are revised frequently.
+ *
+ * These OMAP modules are tied together by various interconnects.
+ * Most of the address and data flow between modules is via OCP-based
+ * interconnects such as the L3 and L4 buses; but there are other
+ * interconnects that distribute the hardware clock tree, handle idle
+ * and reset signaling, supply power, and connect the modules to
+ * various pads or balls on the OMAP package.
+ *
+ * OMAP hwmod provides a consistent way to describe the on-chip
+ * hardware blocks and their integration into the rest of the chip.
+ * This description can be automatically generated from the TI
+ * hardware database.  OMAP hwmod provides a standard, consistent API
+ * to reset, enable, idle, and disable these hardware blocks.  And
+ * hwmod provides a way for other core code, such as the Linux device
+ * code or the OMAP power management and address space mapping code,
+ * to query the hardware database.
+ *
+ * Using hwmod
+ * -----------
+ * Drivers won't call hwmod functions directly.  That is done by the
+ * omap_device code, and in rare occasions, by custom integration code
+ * in arch/arm/ *omap*.  The omap_device code includes functions to
+ * build a struct platform_device using omap_hwmod data, and that is
+ * currently how hwmod data is communicated to drivers and to the
+ * Linux driver model.  Most drivers will call omap_hwmod functions only
+ * indirectly, via pm_runtime*() functions.
+ *
+ * From a layering perspective, here is where the OMAP hwmod code
+ * fits into the kernel software stack:
+ *
+ *            +-------------------------------+
+ *            |      Device driver code       |
+ *            |      (e.g., drivers/)         |
+ *            +-------------------------------+
+ *            |      Linux driver model       |
+ *            |     (platform_device /        |
+ *            |  platform_driver data/code)   |
+ *            +-------------------------------+
+ *            | OMAP core-driver integration  |
+ *            |(arch/arm/mach-omap2/devices.c)|
+ *            +-------------------------------+
+ *            |      omap_device code         |
+ *            | (../plat-omap/omap_device.c)  |
+ *            +-------------------------------+
+ *   ---->    |    omap_hwmod code/data       |    <-----
+ *            | (../mach-omap2/omap_hwmod*)   |
+ *            +-------------------------------+
+ *            | OMAP clock/PRCM/register fns  |
+ *            | (__raw_{read,write}l, clk*)   |
+ *            +-------------------------------+
+ *
+ * Device drivers should not contain any OMAP-specific code or data in
+ * them.  They should only contain code to operate the IP block that
+ * the driver is responsible for.  This is because these IP blocks can
+ * also appear in other SoCs, either from TI (such as DaVinci) or from
+ * other manufacturers; and drivers should be reusable across other
+ * platforms.
+ *
+ * The OMAP hwmod code also will attempt to reset and idle all on-chip
+ * devices upon boot.  The goal here is for the kernel to be
+ * completely self-reliant and independent from bootloaders.  This is
+ * to ensure a repeatable configuration, both to ensure consistent
+ * runtime behavior, and to make it easier for others to reproduce
+ * bugs.
+ *
+ * OMAP module activity states
+ * ---------------------------
+ * The hwmod code considers modules to be in one of several activity
+ * states.  IP blocks start out in an UNKNOWN state, then once they
+ * are registered via the hwmod code, proceed to the REGISTERED state.
+ * Once their clock names are resolved to clock pointers, the module
+ * enters the CLKS_INITED state; and finally, once the module has been
+ * reset and the integration registers programmed, the INITIALIZED state
+ * is entered.  The hwmod code will then place the module into either
+ * the IDLE state to save power, or in the case of a critical system
+ * module, the ENABLED state.
+ *
+ * OMAP core integration code can then call omap_hwmod*() functions
+ * directly to move the module between the IDLE, ENABLED, and DISABLED
+ * states, as needed.  This is done during both the PM idle loop, and
+ * in the OMAP core integration code's implementation of the PM runtime
+ * functions.
+ *
+ * References
+ * ----------
+ * This is a partial list.
  * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
  * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
  * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
@@ -50,11 +142,13 @@
 #include <plat/powerdomain.h>
 #include <plat/clock.h>
 #include <plat/omap_hwmod.h>
+#include <plat/prcm.h>
 
 #include "cm.h"
+#include "prm.h"
 
-/* Maximum microseconds to wait for OMAP module to reset */
-#define MAX_MODULE_RESET_WAIT		10000
+/* Maximum microseconds to wait for OMAP module to softreset */
+#define MAX_MODULE_SOFTRESET_WAIT	10000
 
 /* Name of the OMAP hwmod for the MPU */
 #define MPU_INITIATOR_NAME		"mpu"
@@ -544,6 +638,36 @@ static int _disable_clocks(struct omap_hwmod *oh)
 	return 0;
 }
 
+static void _enable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
+				 oc->_clk->name);
+			clk_enable(oc->_clk);
+		}
+}
+
+static void _disable_optional_clocks(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_opt_clk *oc;
+	int i;
+
+	pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
+
+	for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
+		if (oc->_clk) {
+			pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
+				 oc->_clk->name);
+			clk_disable(oc->_clk);
+		}
+}
+
 /**
  * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use
  * @oh: struct omap_hwmod *
@@ -622,7 +746,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 }
 
 /**
- * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG
+ * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * If module is marked as SWSUP_SIDLE, force the module out of slave
@@ -630,7 +754,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
  * as SWSUP_MSUSPEND, force the module out of master standby;
  * otherwise, configure it for smart-standby.  No return value.
  */
-static void _sysc_enable(struct omap_hwmod *oh)
+static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
@@ -659,8 +783,6 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_module_autoidle(oh, idlemode, &v);
 	}
 
-	/* XXX OCP ENAWAKEUP bit? */
-
 	/*
 	 * XXX The clock framework should handle this, by
 	 * calling into this code.  But this must wait until the
@@ -671,10 +793,14 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
 	_write_sysconfig(v, oh);
+
+	/* If slave is in SMARTIDLE, also enable wakeup */
+	if ((sf & SYSC_HAS_SIDLEMODE) && !(oh->flags & HWMOD_SWSUP_SIDLE))
+		_enable_wakeup(oh);
 }
 
 /**
- * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG
+ * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * If module is marked as SWSUP_SIDLE, force the module into slave
@@ -682,7 +808,7 @@ static void _sysc_enable(struct omap_hwmod *oh)
  * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
  * configure it for smart-standby.  No return value.
  */
-static void _sysc_idle(struct omap_hwmod *oh)
+static void _idle_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
@@ -709,13 +835,13 @@ static void _sysc_idle(struct omap_hwmod *oh)
 }
 
 /**
- * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG
+ * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
  * Force the module into slave idle and master suspend. No return
  * value.
  */
-static void _sysc_shutdown(struct omap_hwmod *oh)
+static void _shutdown_sysc(struct omap_hwmod *oh)
 {
 	u32 v;
 	u8 sf;
@@ -767,10 +893,10 @@ static struct omap_hwmod *_lookup(const char *name)
  * @data: not used; pass NULL
  *
  * Called by omap_hwmod_late_init() (after omap2_clk_init()).
- * Resolves all clock names embedded in the hwmod.  Must be called
- * with omap_hwmod_mutex held.  Returns -EINVAL if the omap_hwmod
- * has not yet been registered or if the clocks have already been
- * initialized, 0 on success, or a non-zero error on failure.
+ * Resolves all clock names embedded in the hwmod.  Returns -EINVAL if
+ * the omap_hwmod has not yet been registered or if the clocks have
+ * already been initialized, 0 on success, or a non-zero error on
+ * failure.
  */
 static int _init_clocks(struct omap_hwmod *oh, void *data)
 {
@@ -833,57 +959,203 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 	return ret;
 }
 
+/**
+ * _lookup_hardreset - return the register bit shift for this hwmod/reset line
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line in the context of this hwmod
+ *
+ * Return the bit position of the reset line that match the
+ * input name. Return -ENOENT if not found.
+ */
+static u8 _lookup_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int i;
+
+	for (i = 0; i < oh->rst_lines_cnt; i++) {
+		const char *rst_line = oh->rst_lines[i].name;
+		if (!strcmp(rst_line, name)) {
+			u8 shift = oh->rst_lines[i].rst_shift;
+			pr_debug("omap_hwmod: %s: _lookup_hardreset: %s: %d\n",
+				 oh->name, rst_line, shift);
+
+			return shift;
+		}
+	}
+
+	return -ENOENT;
+}
+
+/**
+ * _assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
+						  shift);
+	else if (cpu_is_omap44xx())
+		return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						  shift);
+	else
+		return -EINVAL;
+}
+
+/**
+ * _deassert_hardreset - deassert the HW reset line of submodules contained
+ * in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.
+ */
+static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+	int r;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		r = omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
+						 shift);
+	else if (cpu_is_omap44xx())
+		r = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg,
+						 shift);
+	else
+		return -EINVAL;
+
+	if (r == -EBUSY)
+		pr_warning("omap_hwmod: %s: failed to hardreset\n", oh->name);
+
+	return r;
+}
+
+/**
+ * _read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the state of the reset line.
+ */
+static int _read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	u8 shift;
+
+	if (!oh)
+		return -EINVAL;
+
+	shift = _lookup_hardreset(oh, name);
+	if (IS_ERR_VALUE(shift))
+		return shift;
+
+	if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
+		return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
+						       shift);
+	} else if (cpu_is_omap44xx()) {
+		return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg,
+						       shift);
+	} else {
+		return -EINVAL;
+	}
+}
+
 /**
  * _reset - reset an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
- * enabled for this to work.  Must be called with omap_hwmod_mutex
- * held.  Returns -EINVAL if the hwmod cannot be reset this way or if
- * the hwmod is in the wrong state, -ETIMEDOUT if the module did not
- * reset in time, or 0 upon success.
+ * enabled for this to work.  Returns -EINVAL if the hwmod cannot be
+ * reset this way or if the hwmod is in the wrong state, -ETIMEDOUT if
+ * the module did not reset in time, or 0 upon success.
+ *
+ * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
+ * Starting in OMAP4, some IPs does not have SYSSTATUS register and instead
+ * use the SYSCONFIG softreset bit to provide the status.
+ *
+ * Note that some IP like McBSP does have a reset control but no reset status.
  */
 static int _reset(struct omap_hwmod *oh)
 {
-	u32 r, v;
+	u32 v;
 	int c = 0;
+	int ret = 0;
 
 	if (!oh->class->sysc ||
-	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET) ||
-	    (oh->class->sysc->sysc_flags & SYSS_MISSING))
+	    !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
 		return -EINVAL;
 
 	/* clocks must be on for this operation */
 	if (oh->_state != _HWMOD_STATE_ENABLED) {
-		WARN(1, "omap_hwmod: %s: reset can only be entered from "
-		     "enabled state\n", oh->name);
+		pr_warning("omap_hwmod: %s: reset can only be entered from "
+			   "enabled state\n", oh->name);
 		return -EINVAL;
 	}
 
+	/* For some modules, all optionnal clocks need to be enabled as well */
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_enable_optional_clocks(oh);
+
 	pr_debug("omap_hwmod: %s: resetting\n", oh->name);
 
 	v = oh->_sysc_cache;
-	r = _set_softreset(oh, &v);
-	if (r)
-		return r;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
-	omap_test_timeout((omap_hwmod_readl(oh, oh->class->sysc->syss_offs) &
-			   SYSS_RESETDONE_MASK),
-			  MAX_MODULE_RESET_WAIT, c);
-
-	if (c == MAX_MODULE_RESET_WAIT)
-		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
-		     oh->name, MAX_MODULE_RESET_WAIT);
+	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+		omap_test_timeout((omap_hwmod_readl(oh,
+						    oh->class->sysc->syss_offs)
+				   & SYSS_RESETDONE_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS)
+		omap_test_timeout(!(omap_hwmod_readl(oh,
+						     oh->class->sysc->sysc_offs)
+				   & SYSC_TYPE2_SOFTRESET_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+
+	if (c == MAX_MODULE_SOFTRESET_WAIT)
+		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
+			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
 	else
-		pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, c);
+		pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
 
 	/*
 	 * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
 	 * _wait_target_ready() or _reset()
 	 */
 
-	return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0;
+	ret = (c == MAX_MODULE_SOFTRESET_WAIT) ? -ETIMEDOUT : 0;
+
+dis_opt_clks:
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_disable_optional_clocks(oh);
+
+	return ret;
 }
 
 /**
@@ -891,9 +1163,11 @@ static int _reset(struct omap_hwmod *oh)
  * @oh: struct omap_hwmod *
  *
  * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
- * register target.  Must be called with omap_hwmod_mutex held.
- * Returns -EINVAL if the hwmod is in the wrong state or passes along
- * the return value of _wait_target_ready().
+ * register target.  (This function has a full name --
+ * _omap_hwmod_enable() rather than simply _enable() -- because it is
+ * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
+ * the hwmod is in the wrong state or passes along the return value of
+ * _wait_target_ready().
  */
 int _omap_hwmod_enable(struct omap_hwmod *oh)
 {
@@ -909,6 +1183,15 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 
 	pr_debug("omap_hwmod: %s: enabling\n", oh->name);
 
+	/*
+	 * If an IP contains only one HW reset line, then de-assert it in order
+	 * to allow to enable the clocks. Otherwise the PRCM will return
+	 * Intransition status, and the init will failed.
+	 */
+	if ((oh->_state == _HWMOD_STATE_INITIALIZED ||
+	     oh->_state == _HWMOD_STATE_DISABLED) && oh->rst_lines_cnt == 1)
+		_deassert_hardreset(oh, oh->rst_lines[0].name);
+
 	/* XXX mux balls */
 
 	_add_initiator_dep(oh, mpu_oh);
@@ -922,7 +1205,7 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 		if (oh->class->sysc) {
 			if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
 				_update_sysc_cache(oh);
-			_sysc_enable(oh);
+			_enable_sysc(oh);
 		}
 	} else {
 		pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n",
@@ -933,12 +1216,14 @@ int _omap_hwmod_enable(struct omap_hwmod *oh)
 }
 
 /**
- * _idle - idle an omap_hwmod
+ * _omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
  * Idles an omap_hwmod @oh.  This should be called once the hwmod has
- * no further work.  Returns -EINVAL if the hwmod is in the wrong
- * state or returns 0.
+ * no further work.  (This function has a full name --
+ * _omap_hwmod_idle() rather than simply _idle() -- because it is
+ * currently required by the pm34xx.c idle loop.)  Returns -EINVAL if
+ * the hwmod is in the wrong state or returns 0.
  */
 int _omap_hwmod_idle(struct omap_hwmod *oh)
 {
@@ -951,7 +1236,7 @@ int _omap_hwmod_idle(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: idling\n", oh->name);
 
 	if (oh->class->sysc)
-		_sysc_idle(oh);
+		_idle_sysc(oh);
 	_del_initiator_dep(oh, mpu_oh);
 	_disable_clocks(oh);
 
@@ -981,10 +1266,21 @@ static int _shutdown(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: disabling\n", oh->name);
 
 	if (oh->class->sysc)
-		_sysc_shutdown(oh);
-	_del_initiator_dep(oh, mpu_oh);
-	/* XXX what about the other system initiators here? DMA, tesla, d2d */
-	_disable_clocks(oh);
+		_shutdown_sysc(oh);
+
+	/*
+	 * If an IP contains only one HW reset line, then assert it
+	 * before disabling the clocks and shutting down the IP.
+	 */
+	if (oh->rst_lines_cnt == 1)
+		_assert_hardreset(oh, oh->rst_lines[0].name);
+
+	/* clocks and deps are already disabled in idle */
+	if (oh->_state == _HWMOD_STATE_ENABLED) {
+		_del_initiator_dep(oh, mpu_oh);
+		/* XXX what about the other system initiators here? dma, dsp */
+		_disable_clocks(oh);
+	}
 	/* XXX Should this code also force-disable the optional clocks? */
 
 	/* XXX mux any associated balls to safe mode */
@@ -1000,11 +1296,10 @@ static int _shutdown(struct omap_hwmod *oh)
  * @skip_setup_idle_p: do not idle hwmods at the end of the fn if 1
  *
  * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Must be called with omap_hwmod_mutex held.
- * @skip_setup_idle is intended to be used on a system that will not
- * call omap_hwmod_enable() to enable devices (e.g., a system without
- * PM runtime).  Returns -EINVAL if the hwmod is in the wrong state or
- * returns 0.
+ * OCP_SYSCONFIG register.  @skip_setup_idle is intended to be used on
+ * a system that will not call omap_hwmod_enable() to enable devices
+ * (e.g., a system without PM runtime).  Returns -EINVAL if the hwmod
+ * is in the wrong state or returns 0.
  */
 static int _setup(struct omap_hwmod *oh, void *data)
 {
@@ -1034,8 +1329,19 @@ static int _setup(struct omap_hwmod *oh, void *data)
 		}
 	}
 
+	mutex_init(&oh->_mutex);
 	oh->_state = _HWMOD_STATE_INITIALIZED;
 
+	/*
+	 * In the case of hwmod with hardreset that should not be
+	 * de-assert at boot time, we have to keep the module
+	 * initialized, because we cannot enable it properly with the
+	 * reset asserted. Exit without warning because that behavior is
+	 * expected.
+	 */
+	if ((oh->flags & HWMOD_INIT_NO_RESET) && oh->rst_lines_cnt == 1)
+		return 0;
+
 	r = _omap_hwmod_enable(oh);
 	if (r) {
 		pr_warning("omap_hwmod: %s: cannot be enabled (%d)\n",
@@ -1044,16 +1350,16 @@ static int _setup(struct omap_hwmod *oh, void *data)
 	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+		_reset(oh);
+
 		/*
-		 * XXX Do the OCP_SYSCONFIG bits need to be
-		 * reprogrammed after a reset?  If not, then this can
-		 * be removed.  If they do, then probably the
-		 * _omap_hwmod_enable() function should be split to avoid the
-		 * rewrite of the OCP_SYSCONFIG register.
+		 * OCP_SYSCONFIG bits need to be reprogrammed after a softreset.
+		 * The _omap_hwmod_enable() function should be split to
+		 * avoid the rewrite of the OCP_SYSCONFIG register.
 		 */
 		if (oh->class->sysc) {
 			_update_sysc_cache(oh);
-			_sysc_enable(oh);
+			_enable_sysc(oh);
 		}
 	}
 
@@ -1309,7 +1615,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
  * omap_hwmod_enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Enable an omap_hwomd @oh.  Intended to be called by omap_device_enable().
+ * Enable an omap_hwmod @oh.  Intended to be called by omap_device_enable().
  * Returns -EINVAL on error or passes along the return value from _enable().
  */
 int omap_hwmod_enable(struct omap_hwmod *oh)
@@ -1319,9 +1625,9 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	r = _omap_hwmod_enable(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return r;
 }
@@ -1331,7 +1637,7 @@ int omap_hwmod_enable(struct omap_hwmod *oh)
  * omap_hwmod_idle - idle an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Idle an omap_hwomd @oh.  Intended to be called by omap_device_idle().
+ * Idle an omap_hwmod @oh.  Intended to be called by omap_device_idle().
  * Returns -EINVAL on error or passes along the return value from _idle().
  */
 int omap_hwmod_idle(struct omap_hwmod *oh)
@@ -1339,9 +1645,9 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_omap_hwmod_idle(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1350,7 +1656,7 @@ int omap_hwmod_idle(struct omap_hwmod *oh)
  * omap_hwmod_shutdown - shutdown an omap_hwmod
  * @oh: struct omap_hwmod *
  *
- * Shutdown an omap_hwomd @oh.  Intended to be called by
+ * Shutdown an omap_hwmod @oh.  Intended to be called by
  * omap_device_shutdown().  Returns -EINVAL on error or passes along
  * the return value from _shutdown().
  */
@@ -1359,9 +1665,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
 	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_shutdown(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1374,9 +1680,9 @@ int omap_hwmod_shutdown(struct omap_hwmod *oh)
  */
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_enable_clocks(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1389,9 +1695,9 @@ int omap_hwmod_enable_clocks(struct omap_hwmod *oh)
  */
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh)
 {
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_disable_clocks(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1430,20 +1736,18 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh)
  *
  * Under some conditions, a driver may wish to reset the entire device.
  * Called from omap_device code.  Returns -EINVAL on error or passes along
- * the return value from _reset()/_enable().
+ * the return value from _reset().
  */
 int omap_hwmod_reset(struct omap_hwmod *oh)
 {
 	int r;
 
-	if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED))
+	if (!oh)
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	r = _reset(oh);
-	if (!r)
-		r = _omap_hwmod_enable(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return r;
 }
@@ -1468,7 +1772,7 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh)
 {
 	int ret, i;
 
-	ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt;
+	ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt;
 
 	for (i = 0; i < oh->slaves_cnt; i++)
 		ret += oh->slaves[i]->addr_cnt;
@@ -1501,10 +1805,10 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 		r++;
 	}
 
-	for (i = 0; i < oh->sdma_chs_cnt; i++) {
-		(res + r)->name = (oh->sdma_chs + i)->name;
-		(res + r)->start = (oh->sdma_chs + i)->dma_ch;
-		(res + r)->end = (oh->sdma_chs + i)->dma_ch;
+	for (i = 0; i < oh->sdma_reqs_cnt; i++) {
+		(res + r)->name = (oh->sdma_reqs + i)->name;
+		(res + r)->start = (oh->sdma_reqs + i)->dma_req;
+		(res + r)->end = (oh->sdma_reqs + i)->dma_req;
 		(res + r)->flags = IORESOURCE_DMA;
 		r++;
 	}
@@ -1644,9 +1948,9 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_enable_wakeup(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
@@ -1669,13 +1973,91 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
 	    !(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP))
 		return -EINVAL;
 
-	mutex_lock(&omap_hwmod_mutex);
+	mutex_lock(&oh->_mutex);
 	_disable_wakeup(oh);
-	mutex_unlock(&omap_hwmod_mutex);
+	mutex_unlock(&oh->_mutex);
 
 	return 0;
 }
 
+/**
+ * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to lookup and assert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.  Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _assert_hardreset().
+ */
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _assert_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
+ * contained in the hwmod module.
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and deassert
+ *
+ * Some IP like dsp, ipu or iva contain processor that require
+ * an HW reset line to be assert / deassert in order to enable fully
+ * the IP.  Returns -EINVAL if @oh is null or if the operation is not
+ * yet supported on this OMAP; otherwise, passes along the return value
+ * from _deassert_hardreset().
+ */
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _deassert_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+/**
+ * omap_hwmod_read_hardreset - read the HW reset line state of submodules
+ * contained in the hwmod module
+ * @oh: struct omap_hwmod *
+ * @name: name of the reset line to look up and read
+ *
+ * Return the current state of the hwmod @oh's reset line named @name:
+ * returns -EINVAL upon parameter error or if this operation
+ * is unsupported on the current OMAP; otherwise, passes along the return
+ * value from _read_hardreset().
+ */
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name)
+{
+	int ret;
+
+	if (!oh)
+		return -EINVAL;
+
+	mutex_lock(&oh->_mutex);
+	ret = _read_hardreset(oh, name);
+	mutex_unlock(&oh->_mutex);
+
+	return ret;
+}
+
+
 /**
  * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
  * @classname: struct omap_hwmod_class name to search for

arch/arm/mach-omap2/prcm.c

@@ -33,6 +33,7 @@
 #include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
+#include "prm-regbits-44xx.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;
@@ -161,8 +162,8 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
 		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
 						 OMAP2_RM_RSTCTRL);
 	if (cpu_is_omap44xx())
-		prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, prcm_offs,
-						 OMAP4_RM_RSTCTRL);
+		prm_set_mod_reg_bits(OMAP4430_RST_GLOBAL_WARM_SW_MASK,
+				     prcm_offs, OMAP4_RM_RSTCTRL);
 }
 
 static inline u32 __omap_prcm_read(void __iomem *base, s16 module, u16 reg)
@@ -215,6 +216,30 @@ u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask)
 	return v;
 }
 
+/* Read a PRM register, AND it, and shift the result down to bit 0 */
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= mask;
+	v >>= __ffs(mask);
+
+	return v;
+}
+
+/* Read-modify-write a register in a PRM module. Caller must lock */
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg)
+{
+	u32 v;
+
+	v = __raw_readl(reg);
+	v &= ~mask;
+	v |= bits;
+	__raw_writel(v, reg);
+
+	return v;
+}
 /* Read a register in a CM module */
 u32 cm_read_mod_reg(s16 module, u16 idx)
 {

arch/arm/mach-omap2/prm.h

@@ -5,7 +5,7 @@
  * OMAP2/3 Power/Reset Management (PRM) register definitions
  *
  * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -246,6 +246,15 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 	return prm_rmw_mod_reg_bits(bits, 0x0, module, idx);
 }
 
+/* These omap2_ PRM functions apply to both OMAP2 and 3 */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift);
+
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift);
+
 #endif
 
 /*
@@ -398,4 +407,11 @@ static inline u32 prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx)
 #define OMAP_POWERSTATE_MASK				(0x3 << 0)
 
 
+/*
+ * MAX_MODULE_HARDRESET_WAIT: Maximum microseconds to wait for an OMAP
+ * submodule to exit hardreset
+ */
+#define MAX_MODULE_HARDRESET_WAIT		10000
+
+
 #endif

arch/arm/mach-omap2/prm2xxx_3xxx.c

@@ -0,0 +1,110 @@
+/*
+ * OMAP2/3 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "prm-regbits-34xx.h"
+
+/**
+ * omap2_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL if called while running on a non-OMAP2/3 chip.
+ */
+int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+{
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	return prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
+				       (1 << shift));
+}
+
+/**
+ * omap2_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+{
+	u32 mask;
+
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	mask = 1 << shift;
+	prm_rmw_mod_reg_bits(mask, mask, prm_mod, OMAP2_RM_RSTCTRL);
+
+	return 0;
+}
+
+/**
+ * omap2_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift)
+{
+	u32 mask;
+	int c;
+
+	if (!(cpu_is_omap24xx() || cpu_is_omap34xx()))
+		return -EINVAL;
+
+	mask = 1 << shift;
+
+	/* Check the current status to avoid de-asserting the line twice */
+	if (prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL, mask) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	prm_rmw_mod_reg_bits(0xffffffff, mask, prm_mod, OMAP2_RM_RSTST);
+	/* de-assert the reset control line */
+	prm_rmw_mod_reg_bits(mask, 0, prm_mod, OMAP2_RM_RSTCTRL);
+	/* wait the status to be set */
+	omap_test_timeout(prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTST,
+						  mask),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+

arch/arm/mach-omap2/prm44xx.c

@@ -0,0 +1,116 @@
+/*
+ * OMAP4 PRM module functions
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2010 Nokia Corporation
+ * Benoît Cousson
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
+
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+/*
+ * Address offset (in bytes) between the reset control and the reset
+ * status registers: 4 bytes on OMAP4
+ */
+#define OMAP4_RST_CTRL_ST_OFFSET		4
+
+/**
+ * omap4_prm_is_hardreset_asserted - read the HW reset line state of
+ * submodules contained in the hwmod module
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to check
+ *
+ * Returns 1 if the (sub)module hardreset line is currently asserted,
+ * 0 if the (sub)module hardreset line is not currently asserted, or
+ * -EINVAL upon parameter error.
+ */
+int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift)
+{
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift));
+}
+
+/**
+ * omap4_prm_assert_hardreset - assert the HW reset line of a submodule
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to assert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * place the submodule into reset.  Returns 0 upon success or -EINVAL
+ * upon an argument error.
+ */
+int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+	u32 mask;
+
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	mask = 1 << shift;
+	omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg);
+
+	return 0;
+}
+
+/**
+ * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait
+ * @rstctrl_reg: RM_RSTCTRL register address for this module
+ * @shift: register bit shift corresponding to the reset line to deassert
+ *
+ * Some IPs like dsp, ipu or iva contain processors that require an HW
+ * reset line to be asserted / deasserted in order to fully enable the
+ * IP.  These modules may have multiple hard-reset lines that reset
+ * different 'submodules' inside the IP block.  This function will
+ * take the submodule out of reset and wait until the PRCM indicates
+ * that the reset has completed before returning.  Returns 0 upon success or
+ * -EINVAL upon an argument error, -EEXIST if the submodule was already out
+ * of reset, or -EBUSY if the submodule did not exit reset promptly.
+ */
+int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift)
+{
+	u32 mask;
+	void __iomem *rstst_reg;
+	int c;
+
+	if (!cpu_is_omap44xx() || !rstctrl_reg)
+		return -EINVAL;
+
+	rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET;
+
+	mask = 1 << shift;
+
+	/* Check the current status to avoid de-asserting the line twice */
+	if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0)
+		return -EEXIST;
+
+	/* Clear the reset status by writing 1 to the status bit */
+	omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg);
+	/* de-assert the reset control line */
+	omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg);
+	/* wait the status to be set */
+	omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask),
+			  MAX_MODULE_HARDRESET_WAIT, c);
+
+	return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
+}
+

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -14,19 +14,16 @@
  *
  * These headers and macros are used to define OMAP on-chip module
  * data and their integration with other OMAP modules and Linux.
- *
- * References:
- * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
- * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
- * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
- * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
- * - Open Core Protocol Specification 2.2
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
  *
  * To do:
  * - add interconnect error log structures
  * - add pinmuxing
  * - init_conn_id_bit (CONNID_BIT_VECTOR)
  * - implement default hwmod SMS/SDRC flags?
+ * - remove unused fields
  *
  */
 #ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
@@ -35,6 +32,7 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/ioport.h>
+#include <linux/mutex.h>
 #include <plat/cpu.h>
 
 struct omap_device;
@@ -96,7 +94,7 @@ struct omap_hwmod_irq_info {
 /**
  * struct omap_hwmod_dma_info - DMA channels used by the hwmod
  * @name: name of the DMA channel (module local name)
- * @dma_ch: DMA channel ID
+ * @dma_req: DMA request ID
  *
  * @name should be something short, e.g., "tx" or "rx".  It is for use
  * by platform_get_resource_byname().  It is defined locally to the
@@ -104,7 +102,20 @@ struct omap_hwmod_irq_info {
  */
 struct omap_hwmod_dma_info {
 	const char	*name;
-	u16		dma_ch;
+	u16		dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+	const char	*name;
+	u8		rst_shift;
 };
 
 /**
@@ -237,8 +248,9 @@ struct omap_hwmod_ocp_if {
 #define SYSC_HAS_CLOCKACTIVITY	(1 << 4)
 #define SYSC_HAS_SIDLEMODE	(1 << 5)
 #define SYSC_HAS_MIDLEMODE	(1 << 6)
-#define SYSS_MISSING		(1 << 7)
+#define SYSS_HAS_RESET_STATUS	(1 << 7)
 #define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS	(1 << 9)
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -327,10 +339,12 @@ struct omap_hwmod_omap2_prcm {
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
  * @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
 	void __iomem	*clkctrl_reg;
+	void __iomem	*rstctrl_reg;
 	u8		submodule_wkdep_bit;
 };
 
@@ -352,6 +366,10 @@ struct omap_hwmod_omap4_prcm {
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
  * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
  *     only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ *     This is needed for devices like DSS that require optional clocks enabled
+ *     in order to complete the reset. Optional clocks will be disabled
+ *     again after the reset.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -360,6 +378,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
 #define HWMOD_NO_IDLEST				(1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -410,7 +429,7 @@ struct omap_hwmod_class {
  * @class: struct omap_hwmod_class * to the class of this hwmod
  * @od: struct omap_device currently associated with this hwmod (internal use)
  * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt)
- * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt)
+ * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt)
  * @prcm: PRCM data pertaining to this hwmod
  * @main_clk: main clock: OMAP clock name
  * @_clk: pointer to the main struct clk (filled in at runtime)
@@ -424,7 +443,7 @@ struct omap_hwmod_class {
  * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6)
  * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift
  * @mpu_irqs_cnt: number of @mpu_irqs
- * @sdma_chs_cnt: number of @sdma_chs
+ * @sdma_reqs_cnt: number of @sdma_reqs
  * @opt_clks_cnt: number of @opt_clks
  * @master_cnt: number of @master entries
  * @slaves_cnt: number of @slave entries
@@ -433,6 +452,7 @@ struct omap_hwmod_class {
  * @_state: internal-use hwmod state
  * @flags: hwmod flags (documented below)
  * @omap_chip: OMAP chips this hwmod is present on
+ * @_mutex: mutex serializing operations on this hwmod
  * @node: list node for hwmod list (internal use)
  *
  * @main_clk refers to this module's "main clock," which for our
@@ -448,7 +468,8 @@ struct omap_hwmod {
 	struct omap_hwmod_class		*class;
 	struct omap_device		*od;
 	struct omap_hwmod_irq_info	*mpu_irqs;
-	struct omap_hwmod_dma_info	*sdma_chs;
+	struct omap_hwmod_dma_info	*sdma_reqs;
+	struct omap_hwmod_rst_info	*rst_lines;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
 		struct omap_hwmod_omap4_prcm omap4;
@@ -461,6 +482,7 @@ struct omap_hwmod {
 	void				*dev_attr;
 	u32				_sysc_cache;
 	void __iomem			*_mpu_rt_va;
+	struct mutex			_mutex;
 	struct list_head		node;
 	u16				flags;
 	u8				_mpu_port_index;
@@ -468,7 +490,8 @@ struct omap_hwmod {
 	u8				msuspendmux_shift;
 	u8				response_lat;
 	u8				mpu_irqs_cnt;
-	u8				sdma_chs_cnt;
+	u8				sdma_reqs_cnt;
+	u8				rst_lines_cnt;
 	u8				opt_clks_cnt;
 	u8				masters_cnt;
 	u8				slaves_cnt;
@@ -492,6 +515,10 @@ int omap_hwmod_idle(struct omap_hwmod *oh);
 int _omap_hwmod_idle(struct omap_hwmod *oh);
 int omap_hwmod_shutdown(struct omap_hwmod *oh);
 
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
 int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
 int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
 

arch/arm/plat-omap/include/plat/prcm.h

@@ -38,6 +38,8 @@ u32 prm_read_mod_reg(s16 module, u16 idx);
 void prm_write_mod_reg(u32 val, s16 module, u16 idx);
 u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);
 u32 prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask);
+u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask);
+u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg);
 u32 cm_read_mod_reg(s16 module, u16 idx);
 void cm_write_mod_reg(u32 val, s16 module, u16 idx);
 u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx);

arch/arm/plat-omap/omap_device.c

@@ -82,6 +82,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <plat/omap_device.h>
 #include <plat/omap_hwmod.h>
@@ -243,6 +244,44 @@ static inline struct omap_device *_find_by_pdev(struct platform_device *pdev)
 	return container_of(pdev, struct omap_device, pdev);
 }
 
+/**
+ * _add_optional_clock_alias - Add clock alias for hwmod optional clocks
+ * @od: struct omap_device *od
+ *
+ * For every optional clock present per hwmod per omap_device, this function
+ * adds an entry in the clocks list of the form <dev-id=dev_name, con-id=role>
+ * if an entry is already present in it with the form <dev-id=NULL, con-id=role>
+ *
+ * The function is called from inside omap_device_build_ss(), after
+ * omap_device_register.
+ *
+ * This allows drivers to get a pointer to its optional clocks based on its role
+ * by calling clk_get(<dev*>, <role>).
+ *
+ * No return value.
+ */
+static void _add_optional_clock_alias(struct omap_device *od,
+				      struct omap_hwmod *oh)
+{
+	int i;
+
+	for (i = 0; i < oh->opt_clks_cnt; i++) {
+		struct omap_hwmod_opt_clk *oc;
+		int r;
+
+		oc = &oh->opt_clks[i];
+
+		if (!oc->_clk)
+			continue;
+
+		r = clk_add_alias(oc->role, dev_name(&od->pdev.dev),
+				  (char *)oc->clk, &od->pdev.dev);
+		if (r)
+			pr_err("omap_device: %s: clk_add_alias for %s failed\n",
+			       dev_name(&od->pdev.dev), oc->role);
+	}
+}
+
 
 /* Public functions for use by core code */
 
@@ -421,8 +460,10 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 	else
 		ret = omap_device_register(od);
 
-	for (i = 0; i < oh_cnt; i++)
+	for (i = 0; i < oh_cnt; i++) {
 		hwmods[i]->od = od;
+		_add_optional_clock_alias(od, hwmods[i]);
+	}
 
 	if (ret)
 		goto odbs_exit4;