ARM: dts: omap3: Add support for IGEP COM Module

ISEE IGEP COM Module is an TI OMAP3 SoC computer on module.

This patch adds an initial device tree support to boot an
IGEP COM Module from the MMC/SD.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
[b-cousson@ti.com: Update the Makefile for 3.8-rc2]
Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>

arch/arm/boot/dts/Makefile

@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap3-igep0020.dtb \
+	omap3-igep0030.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \

arch/arm/boot/dts/omap3-igep0030.dts

@@ -0,0 +1,44 @@
+/*
+ * Device Tree Source for IGEP COM Module
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/include/ "omap3-igep.dtsi"
+
+/ {
+	model = "IGEP COM Module";
+	compatible = "isee,omap3-igep0030", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		boot {
+			 label = "omap3:green:boot";
+			 gpios = <&twl_gpio 13 1>;
+			 default-state = "on";
+		};
+
+		user0 {
+			 label = "omap3:red:user0";
+			 gpios = <&twl_gpio 18 1>; /* LEDA */
+			 default-state = "off";
+		};
+
+		user1 {
+			 label = "omap3:green:user1";
+			 gpios = <&twl_gpio 19 1>; /* LEDB */
+			 default-state = "off";
+		};
+
+		user2 {
+			 label = "omap3:red:user1";
+			 gpios = <&gpio1 16 1>;
+			 default-state = "off";
+		};
+	};
+};