bnx2x: Don't disable/enable SR-IOV when loading

Current bnx2x implementation controls the number of VFs only by
standard sysfs support, and will reject setting the number of VFs
when the PF is not loaded.
As a result, there is no need to schedule a delayed work to enable
SR-IOV when PF is loaded, as the number of VFs at that point
must be 0.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c

@@ -11740,7 +11740,7 @@ static int bnx2x_open(struct net_device *dev)
 	rc = bnx2x_nic_load(bp, LOAD_OPEN);
 	if (rc)
 		return rc;
-	return bnx2x_open_epilog(bp);
+	return 0;
 }
 
 /* called with rtnl_lock */

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -3635,29 +3635,6 @@ alloc_mem_err:
 	return -ENOMEM;
 }
 
-int bnx2x_open_epilog(struct bnx2x *bp)
-{
-	/* Enable sriov via delayed work. This must be done via delayed work
-	 * because it causes the probe of the vf devices to be run, which invoke
-	 * register_netdevice which must have rtnl lock taken. As we are holding
-	 * the lock right now, that could only work if the probe would not take
-	 * the lock. However, as the probe of the vf may be called from other
-	 * contexts as well (such as passthrough to vm fails) it can't assume
-	 * the lock is being held for it. Using delayed work here allows the
-	 * probe code to simply take the lock (i.e. wait for it to be released
-	 * if it is being held). We only want to do this if the number of VFs
-	 * was set before PF driver was loaded.
-	 */
-	if (IS_SRIOV(bp) && BNX2X_NR_VIRTFN(bp)) {
-		smp_mb__before_clear_bit();
-		set_bit(BNX2X_SP_RTNL_ENABLE_SRIOV, &bp->sp_rtnl_state);
-		smp_mb__after_clear_bit();
-		schedule_delayed_work(&bp->sp_rtnl_task, 0);
-	}
-
-	return 0;
-}
-
 void bnx2x_iov_channel_down(struct bnx2x *bp)
 {
 	int vf_idx;

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h

@@ -782,7 +782,6 @@ static inline int bnx2x_vf_headroom(struct bnx2x *bp)
 void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp);
 int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs);
 void bnx2x_iov_channel_down(struct bnx2x *bp);
-int bnx2x_open_epilog(struct bnx2x *bp);
 
 #else /* CONFIG_BNX2X_SRIOV */
 
@@ -842,7 +841,6 @@ static inline int bnx2x_vf_pci_alloc(struct bnx2x *bp) {return 0; }
 static inline void bnx2x_pf_set_vfs_vlan(struct bnx2x *bp) {}
 static inline int bnx2x_sriov_configure(struct pci_dev *dev, int num_vfs) {return 0; }
 static inline void bnx2x_iov_channel_down(struct bnx2x *bp) {}
-static inline int bnx2x_open_epilog(struct bnx2x *bp) {return 0; }
 
 #endif /* CONFIG_BNX2X_SRIOV */
 #endif /* bnx2x_sriov.h */