[ARM] S3C24XX: Merge devel-gpio

Merge branch 'devel-gpio' into for-rmk-devel

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -51,7 +51,7 @@ PIN Numbers
 -----------
 
   Each pin has an unique number associated with it in regs-gpio.h,
-  eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+  eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
   the GPIO functions which pin is to be used.
 
 
@@ -65,11 +65,11 @@ Configuring a pin
 
   Eg:
 
-     s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
-     s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+     s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+     s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
 
-   which would turn GPA0 into the lowest Address line A0, and set
-   GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+   which would turn GPA(0) into the lowest Address line A0, and set
+   GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
 
 
 Reading the current configuration

arch/arm/mach-s3c2400/gpio.c

@@ -33,10 +33,10 @@
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
-		return -1;  /* not valid interrupts */
+	if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+		return -EINVAL;  /* not valid interrupts */
 
-	return (pin - S3C2410_GPE0) + IRQ_EINT0;
+	return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
 }
 
 EXPORT_SYMBOL(s3c2400_gpio_getirq);

arch/arm/mach-s3c2410/gpio.c

@@ -39,12 +39,12 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 	unsigned long flags;
 	unsigned long val;
 
-	if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
-		return -1;
+	if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+		return -EINVAL;
 
 	config &= 0xff;
 
-	pin -= S3C2410_GPG8;
+	pin -= S3C2410_GPG(8);
 	reg += pin & ~3;
 
 	local_irq_save(flags);

arch/arm/mach-s3c2410/h1940-bluetooth.c

@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
@@ -41,9 +43,9 @@ static void h1940bt_enable(int on)
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 
 		state = 1;
 	}
@@ -52,9 +54,9 @@ static void h1940bt_enable(int on)
 		led_trigger_event(bt_led_trigger, 0);
 #endif
 
-		s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
-		s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
 
@@ -87,14 +89,14 @@ static DEVICE_ATTR(enable, 0644,
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
 	/* Configures BT serial port GPIOs */
-	s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
-	s3c2410_gpio_pullup(S3C2410_GPH0, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-	s3c2410_gpio_pullup(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH2, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
-	s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
 #ifdef CONFIG_LEDS_H1940
 	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);

arch/arm/mach-s3c2410/include/mach/gpio-core.h

@@ -24,7 +24,7 @@ static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin)
 {
 	struct s3c_gpio_chip *chip;
 
-	if (pin > S3C2410_GPG10)
+	if (pin > S3C2410_GPG(10))
 		return NULL;
 
 	chip = &s3c24xx_gpios[pin/32];

arch/arm/mach-s3c2410/include/mach/gpio-fns.h

@@ -0,0 +1,103 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);

arch/arm/mach-s3c2410/include/mach/gpio-nrs.h

@@ -11,6 +11,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
 #define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
 
 #define S3C2410_GPIO_BANKA   (32*0)
@@ -21,3 +24,70 @@
 #define S3C2410_GPIO_BANKF   (32*5)
 #define S3C2410_GPIO_BANKG   (32*6)
 #define S3C2410_GPIO_BANKH   (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR	(32)
+#define S3C2410_GPIO_B_NR	(32)
+#define S3C2410_GPIO_C_NR	(32)
+#define S3C2410_GPIO_D_NR	(32)
+#define S3C2410_GPIO_E_NR	(32)
+#define S3C2410_GPIO_F_NR	(32)
+#define S3C2410_GPIO_G_NR	(32)
+#define S3C2410_GPIO_H_NR	(32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+	S3C2410_GPIO_A_START = 0,
+	S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+	S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+	S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+	S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+	S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+	S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+	S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)	(S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)	(S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)	(S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)	(S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)	(S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)	(S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)	(S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)	(S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0	S3C2410_GPA(0)
+#define S3C2410_GPA1	S3C2410_GPA(1)
+#define S3C2410_GPA3	S3C2410_GPA(3)
+#define S3C2410_GPA7	S3C2410_GPA(7)
+
+#define S3C2410_GPE0	S3C2410_GPE(0)
+#define S3C2410_GPE1	S3C2410_GPE(1)
+#define S3C2410_GPE2	S3C2410_GPE(2)
+#define S3C2410_GPE3	S3C2410_GPE(3)
+#define S3C2410_GPE4	S3C2410_GPE(4)
+#define S3C2410_GPE5	S3C2410_GPE(5)
+#define S3C2410_GPE6	S3C2410_GPE(6)
+#define S3C2410_GPE7	S3C2410_GPE(7)
+#define S3C2410_GPE8	S3C2410_GPE(8)
+#define S3C2410_GPE9	S3C2410_GPE(9)
+#define S3C2410_GPE10	S3C2410_GPE(10)
+
+#define S3C2410_GPH10	S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+

arch/arm/mach-s3c2410/include/mach/gpio.h

@@ -24,5 +24,6 @@
 
 #include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
 
 #define S3C_GPIO_END	(S3C2410_GPIO_BANKH + 32)

arch/arm/mach-s3c2410/include/mach/hardware.h

@@ -15,101 +15,6 @@
 
 #ifndef __ASSEMBLY__
 
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- *	< 0 = no interrupt for this pin
- *	>=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- *	< 0 = no pin
- *	>=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- *      1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- *          width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
-				  unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- *      0 => enable the pull-up
- *
- * eg;
- *
- *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- *	< 0 => error code
- *	  0 => enabled
- *	  1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
 extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
 
 #ifdef CONFIG_CPU_S3C2440

arch/arm/mach-s3c2410/include/mach/regs-gpio.h

@@ -69,104 +69,58 @@
 #define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
 #define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
 
-#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT     (0<<0)
 #define S3C2410_GPA0_ADDR0   (1<<0)
 
-#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT     (0<<1)
 #define S3C2410_GPA1_ADDR16  (1<<1)
 
-#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT     (0<<2)
 #define S3C2410_GPA2_ADDR17  (1<<2)
 
-#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT     (0<<3)
 #define S3C2410_GPA3_ADDR18  (1<<3)
 
-#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT     (0<<4)
 #define S3C2410_GPA4_ADDR19  (1<<4)
 
-#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT     (0<<5)
 #define S3C2410_GPA5_ADDR20  (1<<5)
 
-#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT     (0<<6)
 #define S3C2410_GPA6_ADDR21  (1<<6)
 
-#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT     (0<<7)
 #define S3C2410_GPA7_ADDR22  (1<<7)
 
-#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT     (0<<8)
 #define S3C2410_GPA8_ADDR23  (1<<8)
 
-#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT     (0<<9)
 #define S3C2410_GPA9_ADDR24  (1<<9)
 
-#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT    (0<<10)
 #define S3C2410_GPA10_ADDR25 (1<<10)
 #define S3C2400_GPA10_SCKE   (1<<10)
 
-#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT    (0<<11)
 #define S3C2410_GPA11_ADDR26 (1<<11)
 #define S3C2400_GPA11_nCAS0  (1<<11)
 
-#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT    (0<<12)
 #define S3C2410_GPA12_nGCS1  (1<<12)
 #define S3C2400_GPA12_nCAS1  (1<<12)
 
-#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT    (0<<13)
 #define S3C2410_GPA13_nGCS2  (1<<13)
 #define S3C2400_GPA13_nGCS1  (1<<13)
 
-#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT    (0<<14)
 #define S3C2410_GPA14_nGCS3  (1<<14)
 #define S3C2400_GPA14_nGCS2  (1<<14)
 
-#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT    (0<<15)
 #define S3C2410_GPA15_nGCS4  (1<<15)
 #define S3C2400_GPA15_nGCS3  (1<<15)
 
-#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT    (0<<16)
 #define S3C2410_GPA16_nGCS5  (1<<16)
 #define S3C2400_GPA16_nGCS4  (1<<16)
 
-#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT    (0<<17)
 #define S3C2410_GPA17_CLE    (1<<17)
 #define S3C2400_GPA17_nGCS5  (1<<17)
 
-#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT    (0<<18)
 #define S3C2410_GPA18_ALE    (1<<18)
 
-#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT    (0<<19)
 #define S3C2410_GPA19_nFWE   (1<<19)
 
-#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT    (0<<20)
 #define S3C2410_GPA20_nFRE   (1<<20)
 
-#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT    (0<<21)
 #define S3C2410_GPA21_nRSTOUT (1<<21)
 
-#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT    (0<<22)
 #define S3C2410_GPA22_nFCE   (1<<22)
 
 /* 0x08 and 0x0c are reserved on S3C2410 */
@@ -194,107 +148,69 @@
 
 /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
-#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP     (0x00 << 0)
-#define S3C2410_GPB0_OUTP    (0x01 << 0)
 #define S3C2410_GPB0_TOUT0   (0x02 << 0)
 #define S3C2400_GPB0_DATA16  (0x02 << 0)
 
-#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP     (0x00 << 2)
-#define S3C2410_GPB1_OUTP    (0x01 << 2)
 #define S3C2410_GPB1_TOUT1   (0x02 << 2)
 #define S3C2400_GPB1_DATA17  (0x02 << 2)
 
-#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP     (0x00 << 4)
-#define S3C2410_GPB2_OUTP    (0x01 << 4)
 #define S3C2410_GPB2_TOUT2   (0x02 << 4)
 #define S3C2400_GPB2_DATA18  (0x02 << 4)
 #define S3C2400_GPB2_TCLK1   (0x03 << 4)
 
-#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP     (0x00 << 6)
-#define S3C2410_GPB3_OUTP    (0x01 << 6)
 #define S3C2410_GPB3_TOUT3   (0x02 << 6)
 #define S3C2400_GPB3_DATA19  (0x02 << 6)
 #define S3C2400_GPB3_TXD1    (0x03 << 6)
 
-#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP     (0x00 << 8)
-#define S3C2410_GPB4_OUTP    (0x01 << 8)
 #define S3C2410_GPB4_TCLK0   (0x02 << 8)
 #define S3C2400_GPB4_DATA20  (0x02 << 8)
 #define S3C2410_GPB4_MASK    (0x03 << 8)
 #define S3C2400_GPB4_RXD1    (0x03 << 8)
 #define S3C2400_GPB4_MASK    (0x03 << 8)
 
-#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP     (0x00 << 10)
-#define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
 #define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
-#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP     (0x00 << 12)
-#define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
 #define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
-#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP     (0x00 << 14)
-#define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
 #define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
-#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP     (0x00 << 16)
-#define S3C2410_GPB8_OUTP    (0x01 << 16)
 #define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
 #define S3C2400_GPB8_DATA24  (0x02 << 16)
 
-#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP     (0x00 << 18)
-#define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
 #define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
-#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP    (0x00 << 20)
-#define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
 #define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
-#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
 #define S3C2400_GPB11_INP    (0x00 << 22)
 #define S3C2400_GPB11_OUTP   (0x01 << 22)
 #define S3C2400_GPB11_DATA27 (0x02 << 22)
 
-#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
 #define S3C2400_GPB12_INP    (0x00 << 24)
 #define S3C2400_GPB12_OUTP   (0x01 << 24)
 #define S3C2400_GPB12_DATA28 (0x02 << 24)
 
-#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
 #define S3C2400_GPB13_INP    (0x00 << 26)
 #define S3C2400_GPB13_OUTP   (0x01 << 26)
 #define S3C2400_GPB13_DATA29 (0x02 << 26)
 
-#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
 #define S3C2400_GPB14_INP    (0x00 << 28)
 #define S3C2400_GPB14_OUTP   (0x01 << 28)
 #define S3C2400_GPB14_DATA30 (0x02 << 28)
 
-#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
 #define S3C2400_GPB15_INP    (0x00 << 30)
 #define S3C2400_GPB15_OUTP   (0x01 << 30)
 #define S3C2400_GPB15_DATA31 (0x02 << 30)
@@ -315,99 +231,51 @@
 #define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
 #define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
 
-#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP	(0x00 << 0)
-#define S3C2410_GPC0_OUTP	(0x01 << 0)
 #define S3C2410_GPC0_LEND	(0x02 << 0)
 #define S3C2400_GPC0_VD0 	(0x02 << 0)
 
-#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP	(0x00 << 2)
-#define S3C2410_GPC1_OUTP	(0x01 << 2)
 #define S3C2410_GPC1_VCLK	(0x02 << 2)
 #define S3C2400_GPC1_VD1 	(0x02 << 2)
 
-#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP	(0x00 << 4)
-#define S3C2410_GPC2_OUTP	(0x01 << 4)
 #define S3C2410_GPC2_VLINE	(0x02 << 4)
 #define S3C2400_GPC2_VD2  	(0x02 << 4)
 
-#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP	(0x00 << 6)
-#define S3C2410_GPC3_OUTP	(0x01 << 6)
 #define S3C2410_GPC3_VFRAME	(0x02 << 6)
 #define S3C2400_GPC3_VD3   	(0x02 << 6)
 
-#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP	(0x00 << 8)
-#define S3C2410_GPC4_OUTP	(0x01 << 8)
 #define S3C2410_GPC4_VM		(0x02 << 8)
 #define S3C2400_GPC4_VD4	(0x02 << 8)
 
-#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP	(0x00 << 10)
-#define S3C2410_GPC5_OUTP	(0x01 << 10)
 #define S3C2410_GPC5_LCDVF0	(0x02 << 10)
 #define S3C2400_GPC5_VD5   	(0x02 << 10)
 
-#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP	(0x00 << 12)
-#define S3C2410_GPC6_OUTP	(0x01 << 12)
 #define S3C2410_GPC6_LCDVF1	(0x02 << 12)
 #define S3C2400_GPC6_VD6   	(0x02 << 12)
 
-#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP	(0x00 << 14)
-#define S3C2410_GPC7_OUTP	(0x01 << 14)
 #define S3C2410_GPC7_LCDVF2	(0x02 << 14)
 #define S3C2400_GPC7_VD7   	(0x02 << 14)
 
-#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP	(0x00 << 16)
-#define S3C2410_GPC8_OUTP	(0x01 << 16)
 #define S3C2410_GPC8_VD0	(0x02 << 16)
 #define S3C2400_GPC8_VD8	(0x02 << 16)
 
-#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP	(0x00 << 18)
-#define S3C2410_GPC9_OUTP	(0x01 << 18)
 #define S3C2410_GPC9_VD1	(0x02 << 18)
 #define S3C2400_GPC9_VD9	(0x02 << 18)
 
-#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP	(0x00 << 20)
-#define S3C2410_GPC10_OUTP	(0x01 << 20)
 #define S3C2410_GPC10_VD2	(0x02 << 20)
 #define S3C2400_GPC10_VD10	(0x02 << 20)
 
-#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP	(0x00 << 22)
-#define S3C2410_GPC11_OUTP	(0x01 << 22)
 #define S3C2410_GPC11_VD3	(0x02 << 22)
 #define S3C2400_GPC11_VD11	(0x02 << 22)
 
-#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP	(0x00 << 24)
-#define S3C2410_GPC12_OUTP	(0x01 << 24)
 #define S3C2410_GPC12_VD4	(0x02 << 24)
 #define S3C2400_GPC12_VD12	(0x02 << 24)
 
-#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP	(0x00 << 26)
-#define S3C2410_GPC13_OUTP	(0x01 << 26)
 #define S3C2410_GPC13_VD5	(0x02 << 26)
 #define S3C2400_GPC13_VD13	(0x02 << 26)
 
-#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP	(0x00 << 28)
-#define S3C2410_GPC14_OUTP	(0x01 << 28)
 #define S3C2410_GPC14_VD6	(0x02 << 28)
 #define S3C2400_GPC14_VD14	(0x02 << 28)
 
-#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP	(0x00 << 30)
-#define S3C2410_GPC15_OUTP	(0x01 << 30)
 #define S3C2410_GPC15_VD7	(0x02 << 30)
 #define S3C2400_GPC15_VD15	(0x02 << 30)
 
@@ -432,99 +300,51 @@
 #define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
 #define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
 
-#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP	(0x00 << 0)
-#define S3C2410_GPD0_OUTP	(0x01 << 0)
 #define S3C2410_GPD0_VD8	(0x02 << 0)
 #define S3C2400_GPD0_VFRAME	(0x02 << 0)
 #define S3C2442_GPD0_nSPICS1	(0x03 << 0)
 
-#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP	(0x00 << 2)
-#define S3C2410_GPD1_OUTP	(0x01 << 2)
 #define S3C2410_GPD1_VD9	(0x02 << 2)
 #define S3C2400_GPD1_VM		(0x02 << 2)
 #define S3C2442_GPD1_SPICLK1	(0x03 << 2)
 
-#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP	(0x00 << 4)
-#define S3C2410_GPD2_OUTP	(0x01 << 4)
 #define S3C2410_GPD2_VD10	(0x02 << 4)
 #define S3C2400_GPD2_VLINE	(0x02 << 4)
 
-#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP	(0x00 << 6)
-#define S3C2410_GPD3_OUTP	(0x01 << 6)
 #define S3C2410_GPD3_VD11	(0x02 << 6)
 #define S3C2400_GPD3_VCLK	(0x02 << 6)
 
-#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP	(0x00 << 8)
-#define S3C2410_GPD4_OUTP	(0x01 << 8)
 #define S3C2410_GPD4_VD12	(0x02 << 8)
 #define S3C2400_GPD4_LEND	(0x02 << 8)
 
-#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP	(0x00 << 10)
-#define S3C2410_GPD5_OUTP	(0x01 << 10)
 #define S3C2410_GPD5_VD13	(0x02 << 10)
 #define S3C2400_GPD5_TOUT0	(0x02 << 10)
 
-#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP	(0x00 << 12)
-#define S3C2410_GPD6_OUTP	(0x01 << 12)
 #define S3C2410_GPD6_VD14	(0x02 << 12)
 #define S3C2400_GPD6_TOUT1	(0x02 << 12)
 
-#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP	(0x00 << 14)
-#define S3C2410_GPD7_OUTP	(0x01 << 14)
 #define S3C2410_GPD7_VD15	(0x02 << 14)
 #define S3C2400_GPD7_TOUT2	(0x02 << 14)
 
-#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP	(0x00 << 16)
-#define S3C2410_GPD8_OUTP	(0x01 << 16)
 #define S3C2410_GPD8_VD16	(0x02 << 16)
 #define S3C2400_GPD8_TOUT3	(0x02 << 16)
 
-#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP	(0x00 << 18)
-#define S3C2410_GPD9_OUTP	(0x01 << 18)
 #define S3C2410_GPD9_VD17	(0x02 << 18)
 #define S3C2400_GPD9_TCLK0	(0x02 << 18)
 #define S3C2410_GPD9_MASK       (0x03 << 18)
 
-#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP	(0x00 << 20)
-#define S3C2410_GPD10_OUTP	(0x01 << 20)
 #define S3C2410_GPD10_VD18	(0x02 << 20)
 #define S3C2400_GPD10_nWAIT	(0x02 << 20)
 
-#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP	(0x00 << 22)
-#define S3C2410_GPD11_OUTP	(0x01 << 22)
 #define S3C2410_GPD11_VD19	(0x02 << 22)
 
-#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP	(0x00 << 24)
-#define S3C2410_GPD12_OUTP	(0x01 << 24)
 #define S3C2410_GPD12_VD20	(0x02 << 24)
 
-#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP	(0x00 << 26)
-#define S3C2410_GPD13_OUTP	(0x01 << 26)
 #define S3C2410_GPD13_VD21	(0x02 << 26)
 
-#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP	(0x00 << 28)
-#define S3C2410_GPD14_OUTP	(0x01 << 28)
 #define S3C2410_GPD14_VD22	(0x02 << 28)
 #define S3C2410_GPD14_nSS1	(0x03 << 28)
 
-#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP	(0x00 << 30)
-#define S3C2410_GPD15_OUTP	(0x01 << 30)
 #define S3C2410_GPD15_VD23	(0x02 << 30)
 #define S3C2410_GPD15_nSS0	(0x03 << 30)
 
@@ -550,34 +370,22 @@
 #define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
 #define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
 
-#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP       (0x00 << 0)
-#define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
 #define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
-#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP       (0x00 << 2)
-#define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
 #define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
 
-#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP       (0x00 << 4)
-#define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
 #define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
-#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP       (0x00 << 6)
-#define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
 #define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
@@ -585,9 +393,6 @@
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
 #define S3C2410_GPE3_MASK      (0x03 << 6)
 
-#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP       (0x00 << 8)
-#define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
 #define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
@@ -595,81 +400,48 @@
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
 #define S3C2410_GPE4_MASK      (0x03 << 8)
 
-#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP       (0x00 << 10)
-#define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
 #define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
-#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP       (0x00 << 12)
-#define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
 #define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
 #define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
-#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP       (0x00 << 14)
-#define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
 #define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
 #define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
-#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP       (0x00 << 16)
-#define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
 #define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
 #define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
-#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP       (0x00 << 18)
-#define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
 #define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
 #define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
-#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP      (0x00 << 20)
-#define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
 #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
 #define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
-#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP      (0x00 << 22)
-#define S3C2410_GPE11_OUTP     (0x01 << 22)
 #define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
 #define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
 #define S3C2400_GPE11_nXBREQ   (0x03 << 22)
 
-#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP      (0x00 << 24)
-#define S3C2410_GPE12_OUTP     (0x01 << 24)
 #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
 
-#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP      (0x00 << 26)
-#define S3C2410_GPE13_OUTP     (0x01 << 26)
 #define S3C2410_GPE13_SPICLK0  (0x02 << 26)
 
-#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP      (0x00 << 28)
-#define S3C2410_GPE14_OUTP     (0x01 << 28)
 #define S3C2410_GPE14_IICSCL   (0x02 << 28)
 #define S3C2410_GPE14_MASK     (0x03 << 28)
 
-#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP      (0x00 << 30)
-#define S3C2410_GPE15_OUTP     (0x01 << 30)
 #define S3C2410_GPE15_IICSDA   (0x02 << 30)
 #define S3C2410_GPE15_MASK     (0x03 << 30)
 
@@ -705,55 +477,31 @@
 #define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
 #define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
 
-#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP    (0x00 << 0)
-#define S3C2410_GPF0_OUTP   (0x01 << 0)
 #define S3C2410_GPF0_EINT0  (0x02 << 0)
 #define S3C2400_GPF0_RXD0   (0x02 << 0)
 
-#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP    (0x00 << 2)
-#define S3C2410_GPF1_OUTP   (0x01 << 2)
 #define S3C2410_GPF1_EINT1  (0x02 << 2)
 #define S3C2400_GPF1_RXD1   (0x02 << 2)
 #define S3C2400_GPF1_IICSDA (0x03 << 2)
 
-#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP    (0x00 << 4)
-#define S3C2410_GPF2_OUTP   (0x01 << 4)
 #define S3C2410_GPF2_EINT2  (0x02 << 4)
 #define S3C2400_GPF2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP    (0x00 << 6)
-#define S3C2410_GPF3_OUTP   (0x01 << 6)
 #define S3C2410_GPF3_EINT3  (0x02 << 6)
 #define S3C2400_GPF3_TXD1   (0x02 << 6)
 #define S3C2400_GPF3_IICSCL (0x03 << 6)
 
-#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP    (0x00 << 8)
-#define S3C2410_GPF4_OUTP   (0x01 << 8)
 #define S3C2410_GPF4_EINT4  (0x02 << 8)
 #define S3C2400_GPF4_nRTS0  (0x02 << 8)
 #define S3C2400_GPF4_nXBACK (0x03 << 8)
 
-#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP    (0x00 << 10)
-#define S3C2410_GPF5_OUTP   (0x01 << 10)
 #define S3C2410_GPF5_EINT5  (0x02 << 10)
 #define S3C2400_GPF5_nCTS0  (0x02 << 10)
 #define S3C2400_GPF5_nXBREQ (0x03 << 10)
 
-#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP    (0x00 << 12)
-#define S3C2410_GPF6_OUTP   (0x01 << 12)
 #define S3C2410_GPF6_EINT6  (0x02 << 12)
 #define S3C2400_GPF6_CLKOUT (0x02 << 12)
 
-#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP    (0x00 << 14)
-#define S3C2410_GPF7_OUTP   (0x01 << 14)
 #define S3C2410_GPF7_EINT7  (0x02 << 14)
 
 #define S3C2410_GPF_PUPDIS(x)  (1<<(x))
@@ -778,117 +526,69 @@
 #define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
 #define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
 
-#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP      (0x00 << 0)
-#define S3C2410_GPG0_OUTP     (0x01 << 0)
 #define S3C2410_GPG0_EINT8    (0x02 << 0)
 #define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
 
-#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP      (0x00 << 2)
-#define S3C2410_GPG1_OUTP     (0x01 << 2)
 #define S3C2410_GPG1_EINT9    (0x02 << 2)
 #define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
 
-#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP      (0x00 << 4)
-#define S3C2410_GPG2_OUTP     (0x01 << 4)
 #define S3C2410_GPG2_EINT10   (0x02 << 4)
 #define S3C2410_GPG2_nSS0     (0x03 << 4)
 #define S3C2400_GPG2_CDCLK    (0x02 << 4)
 
-#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP      (0x00 << 6)
-#define S3C2410_GPG3_OUTP     (0x01 << 6)
 #define S3C2410_GPG3_EINT11   (0x02 << 6)
 #define S3C2410_GPG3_nSS1     (0x03 << 6)
 #define S3C2400_GPG3_I2SSDO   (0x02 << 6)
 #define S3C2400_GPG3_I2SSDI   (0x03 << 6)
 
-#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP      (0x00 << 8)
-#define S3C2410_GPG4_OUTP     (0x01 << 8)
 #define S3C2410_GPG4_EINT12   (0x02 << 8)
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
 #define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
-#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP      (0x00 << 10)
-#define S3C2410_GPG5_OUTP     (0x01 << 10)
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
 #define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
-#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP      (0x00 << 12)
-#define S3C2410_GPG6_OUTP     (0x01 << 12)
 #define S3C2410_GPG6_EINT14   (0x02 << 12)
 #define S3C2400_GPG6_MMCDAT   (0x02 << 12)
 #define S3C2400_GPG6_IICSCL   (0x03 << 12)
 #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
 
-#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP      (0x00 << 14)
-#define S3C2410_GPG7_OUTP     (0x01 << 14)
 #define S3C2410_GPG7_EINT15   (0x02 << 14)
 #define S3C2410_GPG7_SPICLK1  (0x03 << 14)
 #define S3C2400_GPG7_SPIMISO  (0x02 << 14)
 #define S3C2400_GPG7_IICSDA   (0x03 << 14)
 
-#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP      (0x00 << 16)
-#define S3C2410_GPG8_OUTP     (0x01 << 16)
 #define S3C2410_GPG8_EINT16   (0x02 << 16)
 #define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
 #define S3C2400_GPG8_IICSCL   (0x03 << 16)
 
-#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP      (0x00 << 18)
-#define S3C2410_GPG9_OUTP     (0x01 << 18)
 #define S3C2410_GPG9_EINT17   (0x02 << 18)
 #define S3C2400_GPG9_SPICLK   (0x02 << 18)
 #define S3C2400_GPG9_MMCCLK   (0x03 << 18)
 
-#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP     (0x00 << 20)
-#define S3C2410_GPG10_OUTP    (0x01 << 20)
 #define S3C2410_GPG10_EINT18  (0x02 << 20)
 
-#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP     (0x00 << 22)
-#define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
 #define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
-#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP     (0x00 << 24)
-#define S3C2410_GPG12_OUTP    (0x01 << 24)
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
 #define S3C2443_GPG12_nINPACK (0x03 << 24)
 
-#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP     (0x00 << 26)
-#define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
 #define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
-#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP     (0x00 << 28)
-#define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
 #define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
-#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP     (0x00 << 30)
-#define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
 #define S3C2443_GPG15_CF_PWR  (0x03 << 30)
@@ -907,62 +607,29 @@
 #define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
 #define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
 
-#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP    (0x00 << 0)
-#define S3C2410_GPH0_OUTP   (0x01 << 0)
 #define S3C2410_GPH0_nCTS0  (0x02 << 0)
 
-#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP    (0x00 << 2)
-#define S3C2410_GPH1_OUTP   (0x01 << 2)
 #define S3C2410_GPH1_nRTS0  (0x02 << 2)
 
-#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP    (0x00 << 4)
-#define S3C2410_GPH2_OUTP   (0x01 << 4)
 #define S3C2410_GPH2_TXD0   (0x02 << 4)
 
-#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP    (0x00 << 6)
-#define S3C2410_GPH3_OUTP   (0x01 << 6)
 #define S3C2410_GPH3_RXD0   (0x02 << 6)
 
-#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP    (0x00 << 8)
-#define S3C2410_GPH4_OUTP   (0x01 << 8)
 #define S3C2410_GPH4_TXD1   (0x02 << 8)
 
-#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP    (0x00 << 10)
-#define S3C2410_GPH5_OUTP   (0x01 << 10)
 #define S3C2410_GPH5_RXD1   (0x02 << 10)
 
-#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP    (0x00 << 12)
-#define S3C2410_GPH6_OUTP   (0x01 << 12)
 #define S3C2410_GPH6_TXD2   (0x02 << 12)
 #define S3C2410_GPH6_nRTS1  (0x03 << 12)
 
-#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP    (0x00 << 14)
-#define S3C2410_GPH7_OUTP   (0x01 << 14)
 #define S3C2410_GPH7_RXD2   (0x02 << 14)
 #define S3C2410_GPH7_nCTS1  (0x03 << 14)
 
-#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP    (0x00 << 16)
-#define S3C2410_GPH8_OUTP   (0x01 << 16)
 #define S3C2410_GPH8_UCLK   (0x02 << 16)
 
-#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP      (0x00 << 18)
-#define S3C2410_GPH9_OUTP     (0x01 << 18)
 #define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
 #define S3C2442_GPH9_nSPICS0  (0x03 << 18)
 
-#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP     (0x00 << 20)
-#define S3C2410_GPH10_OUTP    (0x01 << 20)
 #define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
 
 /* The S3C2412 and S3C2413 move the GPJ register set to after

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -32,6 +32,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/proc_fs.h>
@@ -224,8 +225,8 @@ static void amlm5900_init_pm(void)
 	} else {
 		enable_irq_wake(IRQ_EINT9);
 		/* configure the suspend/resume status pin */
-		s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
-		s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+		s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
 	}
 }
 static void __init amlm5900_init(void)

arch/arm/mach-s3c2410/mach-bast.c

@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -212,15 +213,15 @@ static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
 static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
 {
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
 
 static int bast_pm_resume(struct sys_device *sd)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 	return 0;
 }
 
@@ -593,8 +594,6 @@ static void __init bast_map_io(void)
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
-	usb_simtec_init();
 }
 
 static void __init bast_init(void)
@@ -608,6 +607,7 @@ static void __init bast_init(void)
 	i2c_register_board_info(0, bast_i2c_devs,
 				ARRAY_SIZE(bast_i2c_devs));
 
+	usb_simtec_init();
 	nor_simtec_init();
 }
 

arch/arm/mach-s3c2410/mach-h1940.c

@@ -127,7 +127,7 @@ static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.udc_command		= h1940_udc_pullup,
-	.vbus_pin		= S3C2410_GPG5,
+	.vbus_pin		= S3C2410_GPG(5),
 	.vbus_pin_inverted	= 1,
 };
 

arch/arm/mach-s3c2410/mach-n30.c

@@ -19,6 +19,7 @@
 
 #include <linux/gpio_keys.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
@@ -85,10 +86,10 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 {
 	switch (cmd) {
 	case S3C2410_UDC_P_ENABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
 		break;
 	case S3C2410_UDC_P_DISABLE :
-		s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
 		break;
 	case S3C2410_UDC_P_RESET :
 		break;
@@ -99,55 +100,55 @@ static void n30_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 
 static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
 	.udc_command		= n30_udc_pullup,
-	.vbus_pin		= S3C2410_GPG1,
+	.vbus_pin		= S3C2410_GPG(1),
 	.vbus_pin_inverted	= 0,
 };
 
 static struct gpio_keys_button n30_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Thumbwheel Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Thumbwheel Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Thumbwheel Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
@@ -169,73 +170,73 @@ static struct platform_device n30_button_device = {
 
 static struct gpio_keys_button n35_buttons[] = {
 	{
-		.gpio		= S3C2410_GPF0,
+		.gpio		= S3C2410_GPF(0),
 		.code		= KEY_POWER,
 		.desc		= "Power",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG9,
+		.gpio		= S3C2410_GPG(9),
 		.code		= KEY_UP,
 		.desc		= "Joystick Up",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG8,
+		.gpio		= S3C2410_GPG(8),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Down",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG6,
+		.gpio		= S3C2410_GPG(6),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Left",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG5,
+		.gpio		= S3C2410_GPG(5),
 		.code		= KEY_DOWN,
 		.desc		= "Joystick Right",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG7,
+		.gpio		= S3C2410_GPG(7),
 		.code		= KEY_ENTER,
 		.desc		= "Joystick Press",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF7,
+		.gpio		= S3C2410_GPF(7),
 		.code		= KEY_HOMEPAGE,
 		.desc		= "Home",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF6,
+		.gpio		= S3C2410_GPF(6),
 		.code		= KEY_CALENDAR,
 		.desc		= "Calendar",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF5,
+		.gpio		= S3C2410_GPF(5),
 		.code		= KEY_ADDRESSBOOK,
 		.desc		= "Contacts",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF4,
+		.gpio		= S3C2410_GPF(4),
 		.code		= KEY_MAIL,
 		.desc		= "Mail",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPF3,
+		.gpio		= S3C2410_GPF(3),
 		.code		= SW_RADIO,
 		.desc		= "GPS Antenna",
 		.active_low	= 0,
 	},
 	{
-		.gpio		= S3C2410_GPG2,
+		.gpio		= S3C2410_GPG(2),
 		.code		= SW_HEADPHONE_INSERT,
 		.desc		= "Headphone",
 		.active_low	= 0,
@@ -259,7 +260,7 @@ static struct platform_device n35_button_device = {
 /* This is the bluetooth LED on the device. */
 static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 	.name		= "blue_led",
-	.gpio		= S3C2410_GPG6,
+	.gpio		= S3C2410_GPG(6),
 	.def_trigger	= "",
 };
 
@@ -270,7 +271,7 @@ static struct s3c24xx_led_platdata n30_blue_led_pdata = {
 static struct s3c24xx_led_platdata n30_warning_led_pdata = {
 	.name		= "warning_led",
 	.flags          = S3C24XX_LEDF_ACTLOW,
-	.gpio		= S3C2410_GPD9,
+	.gpio		= S3C2410_GPD(9),
 	.def_trigger	= "",
 };
 

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
@@ -198,7 +199,7 @@ static struct platform_device qt2410_cs89x0 = {
 /* LED */
 
 static struct s3c24xx_led_platdata qt2410_pdata_led = {
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led",
 	.def_trigger	= "timer",
@@ -218,18 +219,18 @@ static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
 {
 	switch (cs) {
 	case BITBANG_CS_ACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
 		break;
 	case BITBANG_CS_INACTIVE:
-		s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+		s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
 		break;
 	}
 }
 
 static struct s3c2410_spigpio_info spi_gpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
+	.pin_clk	= S3C2410_GPG(7),
+	.pin_mosi	= S3C2410_GPG(6),
+	.pin_miso	= S3C2410_GPG(5),
 	.chip_select	= &spi_gpio_cs,
 };
 
@@ -346,13 +347,13 @@ static void __init qt2410_machine_init(void)
 	}
 	s3c24xx_fb_set_platdata(&qt2410_fb_info);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
 
 	s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
 
 	platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
 	s3c_pm_init();

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/i2c.h>
 
@@ -277,19 +278,19 @@ static struct platform_device vr1000_dm9k1 = {
 
 static struct s3c24xx_led_platdata vr1000_led1_pdata = {
 	.name		= "led1",
-	.gpio		= S3C2410_GPB0,
+	.gpio		= S3C2410_GPB(0),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led2_pdata = {
 	.name		= "led2",
-	.gpio		= S3C2410_GPB1,
+	.gpio		= S3C2410_GPB(1),
 	.def_trigger	= "",
 };
 
 static struct s3c24xx_led_platdata vr1000_led3_pdata = {
 	.name		= "led3",
-	.gpio		= S3C2410_GPB2,
+	.gpio		= S3C2410_GPB(2),
 	.def_trigger	= "",
 };
 
@@ -355,8 +356,8 @@ static struct clk *vr1000_clocks[] __initdata = {
 
 static void vr1000_power_off(void)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
 }
 
 static void __init vr1000_map_io(void)

arch/arm/mach-s3c2410/pm.c

@@ -25,6 +25,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 #include <linux/sysdev.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -76,7 +77,7 @@ static void s3c2410_pm_prepare(void)
 	}
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 
 }
 
@@ -91,7 +92,7 @@ static int s3c2410_pm_resume(struct sys_device *dev)
 	__raw_writel(tmp, S3C2410_GSTATUS2);
 
 	if ( machine_is_aml_m5900() )
-		s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+		s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 
 	return 0;
 }

arch/arm/mach-s3c2410/usb-simtec.c

@@ -18,9 +18,11 @@
 #include <linux/types.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
+#include <linux/gpio.h>
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
@@ -29,7 +31,6 @@
 
 #include <mach/bast-map.h>
 #include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -53,9 +54,9 @@ usb_simtec_powercontrol(int port, int to)
 	power_state[port] = to;
 
 	if (power_state[0] && power_state[1])
-		s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+		gpio_set_value(S3C2410_GPB(4), 0);
 	else
-		s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+		gpio_set_value(S3C2410_GPB(4), 1);
 }
 
 static irqreturn_t
@@ -63,7 +64,7 @@ usb_simtec_ocirq(int irq, void *pw)
 {
 	struct s3c2410_hcd_info *info = pw;
 
-	if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+	if (gpio_get_value(S3C2410_GPG(10)) == 0) {
 		pr_debug("usb_simtec: over-current irq (oc detected)\n");
 		s3c2410_usb_report_oc(info, 3);
 	} else {
@@ -106,10 +107,27 @@ static struct s3c2410_hcd_info usb_simtec_info = {
 
 int usb_simtec_init(void)
 {
+	int ret;
+
 	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
-	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 
-	s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+	ret = gpio_request(S3C2410_GPB(4), "USB power control");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPB4\n", __func__);
+		return ret;
+	}
+
+	ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+	if (ret < 0) {
+		pr_err("%s: failed to get GPG10\n", __func__);
+		gpio_free(S3C2410_GPB(4));
+		return ret;
+	}
+
+	/* turn power on */
+	gpio_direction_output(S3C2410_GPB(4), 1);
+	gpio_direction_input(S3C2410_GPG(10));
+
+	s3c_device_usb.dev.platform_data = &usb_simtec_info;
 	return 0;
 }

arch/arm/mach-s3c2412/mach-jive.c

@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -356,8 +357,8 @@ static void jive_lcm_reset(unsigned int set)
 {
 	printk(KERN_DEBUG "%s(%d)\n", __func__, set);
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, set);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 }
 
 #undef LCD_UPPER_MARGIN
@@ -390,13 +391,13 @@ static struct ili9320_platdata jive_lcm_config = {
 
 static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
 	.bus_num	= 1,
-	.pin_clk	= S3C2410_GPG8,
-	.pin_mosi	= S3C2410_GPB8,
+	.pin_clk	= S3C2410_GPG(8),
+	.pin_mosi	= S3C2410_GPB(8),
 	.num_chipselect	= 1,
 	.chip_select	= jive_lcd_spi_chipselect,
 };
@@ -412,13 +413,13 @@ static struct platform_device jive_device_lcdspi = {
 
 static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 {
-	s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
 }
 
 static struct s3c2410_spigpio_info jive_wm8750_spi = {
 	.bus_num	= 2,
-	.pin_clk	= S3C2410_GPB4,
-	.pin_mosi	= S3C2410_GPB9,
+	.pin_clk	= S3C2410_GPB(4),
+	.pin_mosi	= S3C2410_GPB(9),
 	.num_chipselect	= 1,
 	.chip_select	= jive_wm8750_chipselect,
 };
@@ -479,7 +480,7 @@ static struct platform_device *jive_devices[] __initdata = {
 };
 
 static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
-	.vbus_pin	= S3C2410_GPG1,		/* detect is on GPG1 */
+	.vbus_pin	= S3C2410_GPG(1),		/* detect is on GPG1 */
 };
 
 /* Jive power management device */
@@ -529,8 +530,8 @@ static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
 
-	s3c2410_gpio_setpin(S3C2410_GPC5, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
 }
 
 static void __init jive_machine_init(void)
@@ -634,22 +635,22 @@ static void __init jive_machine_init(void)
 
 	/* initialise the spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPG13, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB7, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPB6, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPG8, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
 
 	/* initialise the WM8750 spi */
 
-	s3c2410_gpio_setpin(S3C2410_GPH10, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */

arch/arm/mach-s3c2412/mach-smdk2413.c

@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
@@ -84,10 +85,10 @@ static void smdk2413_udc_pullup(enum s3c2410_udc_cmd_e cmd)
 	switch (cmd)
 	{
 		case S3C2410_UDC_P_ENABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
 			break;
 		case S3C2410_UDC_P_DISABLE :
-			s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+			s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
 			break;
 		case S3C2410_UDC_P_RESET :
 			break;
@@ -134,8 +135,8 @@ static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
 
 	s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
 			      S3C2410_MISCCR_USBSUSPND0 |

arch/arm/mach-s3c2440/mach-anubis.c

@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
@@ -468,7 +469,7 @@ static void __init anubis_map_io(void)
 		anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
 	} else {
 		/* ensure that the GPIO is setup */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 }
 

arch/arm/mach-s3c2440/mach-at2440evb.c

@@ -166,7 +166,7 @@ static struct platform_device at2440evb_device_eth = {
 };
 
 static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
-	.gpio_detect	= S3C2410_GPG10,
+	.gpio_detect	= S3C2410_GPG(10),
 };
 
 /* 7" LCD panel */

arch/arm/mach-s3c2440/mach-nexcoder.c

@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
@@ -120,16 +121,16 @@ static struct platform_device *nexcoder_devices[] __initdata = {
 static void __init nexcoder_sensorboard_init(void)
 {
 	// Initialize SCCB bus
-	s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+	s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
 
 	// Power up the sensor board
-	s3c2410_gpio_setpin(S3C2410_GPF1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
-	s3c2410_gpio_setpin(S3C2410_GPF2, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+	s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
 }
 
 static void __init nexcoder_map_io(void)

arch/arm/mach-s3c2440/mach-osiris.c

@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
 #include <linux/serial_core.h>
@@ -291,8 +292,8 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 
 	/* ensure that an nRESET is not generated on resume. */
-	s3c2410_gpio_setpin(S3C2410_GPA21, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+	s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
 
 	return 0;
 }
@@ -304,7 +305,7 @@ static int osiris_pm_resume(struct sys_device *sd)
 
 	__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
 
-	s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
 
 	return 0;
 }
@@ -384,7 +385,7 @@ static void __init osiris_map_io(void)
 		osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
 	} else {
 		/* write-protect line to the NAND */
-		s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+		s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
 	}
 
 	/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */

arch/arm/plat-s3c24xx/common-smdk.c

@@ -18,6 +18,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
@@ -47,27 +48,27 @@
 /* LED devices */
 
 static struct s3c24xx_led_platdata smdk_pdata_led4 = {
-	.gpio		= S3C2410_GPF4,
+	.gpio		= S3C2410_GPF(4),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led4",
 	.def_trigger	= "timer",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led5 = {
-	.gpio		= S3C2410_GPF5,
+	.gpio		= S3C2410_GPF(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led5",
 	.def_trigger	= "nand-disk",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led6 = {
-	.gpio		= S3C2410_GPF6,
+	.gpio		= S3C2410_GPF(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led6",
 };
 
 static struct s3c24xx_led_platdata smdk_pdata_led7 = {
-	.gpio		= S3C2410_GPF7,
+	.gpio		= S3C2410_GPF(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.name		= "led7",
 };
@@ -184,15 +185,15 @@ void __init smdk_machine_init(void)
 {
 	/* Configure the LEDs (even if we have no LED support)*/
 
-	s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+	s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
 
-	s3c2410_gpio_setpin(S3C2410_GPF4, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF5, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF6, 1);
-	s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+	s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
 
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;

arch/arm/plat-s3c24xx/gpio.c

@@ -183,35 +183,19 @@ EXPORT_SYMBOL(s3c2410_modify_misccr);
 
 int s3c2410_gpio_getirq(unsigned int pin)
 {
-	if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
-		return -1;	/* not valid interrupts */
+	if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+		return -EINVAL;	/* not valid interrupts */
 
-	if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
-		return -1;	/* not valid pin */
+	if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+		return -EINVAL;	/* not valid pin */
 
-	if (pin < S3C2410_GPF4)
-		return (pin - S3C2410_GPF0) + IRQ_EINT0;
+	if (pin < S3C2410_GPF(4))
+		return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
 
-	if (pin < S3C2410_GPG0)
-		return (pin - S3C2410_GPF4) + IRQ_EINT4;
+	if (pin < S3C2410_GPG(0))
+		return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
 
-	return (pin - S3C2410_GPG0) + IRQ_EINT8;
+	return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
 }
 
 EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
-	if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
-		return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
-	if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
-		return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
-	if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
-		return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
-	return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);

arch/arm/plat-s3c24xx/gpiolib.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sysdev.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -78,10 +79,10 @@ static int s3c24xx_gpiolib_bankg_toirq(struct gpio_chip *chip, unsigned offset)
 
 struct s3c_gpio_chip s3c24xx_gpios[] = {
 	[0] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
+		.base	= S3C2410_GPACON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_1bit),
 		.chip	= {
-			.base			= S3C2410_GPA0,
+			.base			= S3C2410_GPA(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOA",
 			.ngpio			= 24,
@@ -90,50 +91,50 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[1] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPB0),
+		.base	= S3C2410_GPBCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPB0,
+			.base			= S3C2410_GPB(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOB",
 			.ngpio			= 16,
 		},
 	},
 	[2] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPC0),
+		.base	= S3C2410_GPCCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPC0,
+			.base			= S3C2410_GPC(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOC",
 			.ngpio			= 16,
 		},
 	},
 	[3] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPD0),
+		.base	= S3C2410_GPDCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPD0,
+			.base			= S3C2410_GPD(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOD",
 			.ngpio			= 16,
 		},
 	},
 	[4] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPE0),
+		.base	= S3C2410_GPECON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPE0,
+			.base			= S3C2410_GPE(0),
 			.label			= "GPIOE",
 			.owner			= THIS_MODULE,
 			.ngpio			= 16,
 		},
 	},
 	[5] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPF0),
+		.base	= S3C2410_GPFCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPF0,
+			.base			= S3C2410_GPF(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOF",
 			.ngpio			= 8,
@@ -141,15 +142,24 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
 		},
 	},
 	[6] = {
-		.base	= S3C24XX_GPIO_BASE(S3C2410_GPG0),
+		.base	= S3C2410_GPGCON,
 		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
 		.chip	= {
-			.base			= S3C2410_GPG0,
+			.base			= S3C2410_GPG(0),
 			.owner			= THIS_MODULE,
 			.label			= "GPIOG",
-			.ngpio			= 10,
+			.ngpio			= 16,
 			.to_irq			= s3c24xx_gpiolib_bankg_toirq,
 		},
+	}, {
+		.base	= S3C2410_GPHCON,
+		.pm	= __gpio_pm(&s3c_gpio_pm_2bit),
+		.chip	= {
+			.base			= S3C2410_GPH(0),
+			.owner			= THIS_MODULE,
+			.label			= "GPIOH",
+			.ngpio			= 11,
+		},
 	},
 };
 
@@ -164,4 +174,4 @@ static __init int s3c24xx_gpiolib_init(void)
 	return 0;
 }
 
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);

arch/arm/plat-s3c24xx/pm.c

@@ -30,6 +30,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/time.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
@@ -123,12 +124,12 @@ void s3c_pm_configure_extint(void)
 	 * and then configure it as an input if it is not
 	*/
 
-	for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
-		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
+	for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+		s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
 	}
 
-	for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
-		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+	for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+		s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
 	}
 }
 

arch/arm/plat-s3c24xx/setup-i2c.c

@@ -11,6 +11,7 @@
 */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
 
 struct platform_device;
 
@@ -20,6 +21,6 @@ struct platform_device;
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
-	s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+	s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
 }

arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c

@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi,
 					  int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 0);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPE11, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE12, 1);
-		s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+		s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
 	}
 }

arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c

@@ -22,16 +22,16 @@ void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi,
 				       int enable)
 {
 	if (enable) {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 0);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
 	} else {
-		s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_pullup(S3C2410_GPG5, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG6, 1);
-		s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+		s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+		s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
 	}
 }

drivers/leds/leds-h1940.c

@@ -16,6 +16,8 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
+
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>

drivers/leds/leds-s3c24xx.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>

drivers/mmc/host/s3cmci.c

@@ -17,6 +17,7 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -1121,7 +1122,7 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	case MMC_POWER_OFF:
 	default:
 		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;

drivers/spi/spi_s3c24xx_gpio.c

@@ -17,6 +17,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>

sound/soc/s3c24xx/s3c2412-i2s.c

@@ -20,6 +20,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/kernel.h>
 #include <linux/io.h>

sound/soc/s3c24xx/s3c2443-ac97.c

@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/wait.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/clk.h>
 
 #include <sound/core.h>

sound/soc/s3c24xx/s3c24xx-i2s.c

@@ -21,6 +21,8 @@
 #include <linux/clk.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>