Merge changes from linux-2.6 by hand

.gitignore

@@ -0,0 +1,30 @@
+#
+# NOTE! Don't add files that are generated in specific
+# subdirectories here. Add them in the ".gitignore" file
+# in that subdirectory instead.
+#
+# Normal rules
+#
+.*
+*.o
+*.a
+*.s
+*.ko
+*.mod.c
+
+#
+# Top-level generic files
+#
+vmlinux*
+System.map
+Module.symvers
+
+#
+# Generated include files
+#
+include/asm
+include/config
+include/linux/autoconf.h
+include/linux/compile.h
+include/linux/version.h
+

Documentation/connector/connector.txt

@@ -131,3 +131,47 @@ Netlink itself is not reliable protocol, that means that messages can
 be lost due to memory pressure or process' receiving queue overflowed,
 so caller is warned must be prepared. That is why struct cn_msg [main
 connector's message header] contains u32 seq and u32 ack fields.
+
+/*****************************************/
+Userspace usage.
+/*****************************************/
+2.6.14 has a new netlink socket implementation, which by default does not
+allow to send data to netlink groups other than 1.
+So, if to use netlink socket (for example using connector) 
+with different group number userspace application must subscribe to 
+that group. It can be achieved by following pseudocode:
+
+s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+
+l_local.nl_family = AF_NETLINK;
+l_local.nl_groups = 12345;
+l_local.nl_pid = 0;
+
+if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+	perror("bind");
+	close(s);
+	return -1;
+}
+
+{
+	int on = l_local.nl_groups;
+	setsockopt(s, 270, 1, &on, sizeof(on));
+}
+
+Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
+option. To drop multicast subscription one should call above socket option
+with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+
+2.6.14 netlink code only allows to select a group which is less or equal to
+the maximum group number, which is used at netlink_kernel_create() time.
+In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
+group number 12345, you must increment CN_NETLINK_USERS to that number.
+Additional 0xf numbers are allocated to be used by non-in-kernel users.
+
+Due to this limitation, group 0xffffffff does not work now, so one can
+not use add/remove connector's group notifications, but as far as I know, 
+only cn_test.c test module used it.
+
+Some work in netlink area is still being done, so things can be changed in
+2.6.15 timeframe, if it will happen, documentation will be updated for that
+kernel.

MAINTAINERS

@@ -1618,6 +1618,13 @@ M:	vandrove@vc.cvut.cz
 L:	linux-fbdev-devel@lists.sourceforge.net
 S:	Maintained
 
+MEGARAID SCSI DRIVERS
+P:     Neela Syam Kolli
+M:     Neela.Kolli@engenio.com
+S:     linux-scsi@vger.kernel.org
+W:     http://megaraid.lsilogic.com
+S:     Maintained
+
 MEMORY TECHNOLOGY DEVICES
 P:	David Woodhouse
 M:	dwmw2@infradead.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 14
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc5
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*
@@ -372,7 +372,7 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
 # Files to ignore in find ... statements
 
 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
-RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
 
 # ===========================================================================
 # Rules shared between *config targets and build targets
@@ -660,8 +660,10 @@ quiet_cmd_sysmap = SYSMAP
 # Link of vmlinux
 # If CONFIG_KALLSYMS is set .version is already updated
 # Generate System.map and verify that the content is consistent
-
+# Use + in front of the vmlinux_version rule to silent warning with make -j2
+# First command is ':' to allow us to use + in front of the rule
 define rule_vmlinux__
+	:
 	$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
 
 	$(call cmd,vmlinux__)

arch/arm/Makefile

@@ -53,7 +53,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_V6)		:=-mtune=strongarm
+tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 # Need -Uarm for gcc < 3.x
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)

arch/arm/kernel/armksyms.c

@@ -45,8 +45,8 @@ extern void fp_enter(void);
 
 #define EXPORT_SYMBOL_ALIAS(sym,orig)		\
  EXPORT_CRC_ALIAS(sym)				\
- const struct kernel_symbol __ksymtab_##sym	\
-  __attribute__((section("__ksymtab"))) =	\
+ static const struct kernel_symbol __ksymtab_##sym	\
+  __attribute_used__ __attribute__((section("__ksymtab"))) =	\
     { (unsigned long)&orig, #sym };
 
 /*

arch/arm/kernel/entry-common.S

@@ -106,15 +106,10 @@ ENTRY(ret_from_fork)
 	.endm
 
 .Larm700bug:
-	ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
-	sub	lr, lr, #4
-	str	lr, [r8]
-	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
 	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
 	add	sp, sp, #S_FRAME_SIZE
-	movs	pc, lr
+	subs	pc, lr, #4
 #else
 	.macro	arm710_bug_check, instr, temp
 	.endm

arch/arm/kernel/vmlinux.lds.S

@@ -89,13 +89,6 @@ SECTIONS
 		*(.got)			/* Global offset table		*/
 	}
 
-	. = ALIGN(16);
-	__ex_table : {			/* Exception table		*/
-		__start___ex_table = .;
-			*(__ex_table)
-		__stop___ex_table = .;
-	}
-
 	RODATA
 
 	_etext = .;			/* End of text and rodata section */
@@ -137,6 +130,14 @@ SECTIONS
 		. = ALIGN(32);
 		*(.data.cacheline_aligned)
 
+		/*
+		 * The exception fixup table (might need resorting at runtime)
+		 */
+		. = ALIGN(32);
+		__start___ex_table = .;
+		*(__ex_table)
+		__stop___ex_table = .;
+
 		/*
 		 * and the usual data section
 		 */

arch/arm/mach-integrator/impd1.c

@@ -67,7 +67,7 @@ static void impd1_setvco(struct clk *clk, struct icst525_vco vco)
 	}
 	writel(0, impd1->base + IMPD1_LOCK);
 
-#if DEBUG
+#ifdef DEBUG
 	vco.v = val & 0x1ff;
 	vco.r = (val >> 9) & 0x7f;
 	vco.s = (val >> 16) & 7;
@@ -427,17 +427,18 @@ static int impd1_probe(struct lm_device *dev)
 	return ret;
 }
 
+static int impd1_remove_one(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+}
+
 static void impd1_remove(struct lm_device *dev)
 {
 	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	struct list_head *l, *n;
 	int i;
 
-	list_for_each_safe(l, n, &dev->dev.children) {
-		struct device *d = list_to_dev(l);
-
-		device_unregister(d);
-	}
+	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
 
 	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++)
 		clk_unregister(&impd1->vcos[i]);

arch/arm/mach-l7200/core.c

@@ -7,11 +7,17 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/device.h>
 
+#include <asm/types.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/page.h>
 
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/mach/irq.h>
 
 /*
  * IRQ base register
@@ -47,6 +53,12 @@ static void l7200_unmask_irq(unsigned int irq)
 {
 	IRQ_ENABLE = 1 << irq;
 }
+
+static struct irqchip l7200_irq_chip = {
+	.ack		= l7200_mask_irq,
+	.mask		= l7200_mask_irq,
+	.unmask		= l7200_unmask_irq
+};
  
 static void __init l7200_init_irq(void)
 {
@@ -56,11 +68,9 @@ static void __init l7200_init_irq(void)
 	FIQ_ENABLECLEAR = 0xffffffff;	/* clear all fast interrupt enables */
 
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		irq_desc[irq].valid	= 1;
-		irq_desc[irq].probe_ok	= 1;
-		irq_desc[irq].mask_ack	= l7200_mask_irq;
-		irq_desc[irq].mask	= l7200_mask_irq;
-		irq_desc[irq].unmask	= l7200_unmask_irq;
+		set_irq_chip(irq, &l7200_irq_chip);
+		set_irq_flags(irq, IRQF_VALID);
+		set_irq_handler(irq, do_level_IRQ);
 	}
 
 	init_FIQ();

arch/arm/mach-pxa/corgi_lcd.c

@@ -467,6 +467,7 @@ void corgi_put_hsync(void)
 {
 	if (get_hsync_time)
 		symbol_put(w100fb_get_hsynclen);
+	get_hsync_time = NULL;
 }
 
 void corgi_wait_hsync(void)
@@ -476,20 +477,37 @@ void corgi_wait_hsync(void)
 #endif
 
 #ifdef CONFIG_PXA_SHARP_Cxx00
+static struct device *spitz_pxafb_dev;
+
+static int is_pxafb_device(struct device * dev, void * data)
+{
+	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
+
+	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
+}
+
 unsigned long spitz_get_hsync_len(void)
 {
+	if (!spitz_pxafb_dev) {
+		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
+		if (!spitz_pxafb_dev)
+			return 0;
+	}
 	if (!get_hsync_time)
 		get_hsync_time = symbol_get(pxafb_get_hsync_time);
 	if (!get_hsync_time)
 		return 0;
 
-	return pxafb_get_hsync_time(&pxafb_device.dev);
+	return pxafb_get_hsync_time(spitz_pxafb_dev);
 }
 
 void spitz_put_hsync(void)
 {
+	put_device(spitz_pxafb_dev);
 	if (get_hsync_time)
 		symbol_put(pxafb_get_hsync_time);
+	spitz_pxafb_dev = NULL;
+	get_hsync_time = NULL;
 }
 
 void spitz_wait_hsync(void)

arch/arm/mach-pxa/generic.c

@@ -208,6 +208,11 @@ static struct platform_device pxafb_device = {
 	.resource	= pxafb_resources,
 };
 
+void __init set_pxa_fb_parent(struct device *parent_dev)
+{
+	pxafb_device.dev.parent = parent_dev;
+}
+
 static struct platform_device ffuart_device = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
@@ -245,6 +250,25 @@ void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 	i2c_device.dev.platform_data = info;
 }
 
+static struct resource i2s_resources[] = {
+	{
+		.start	= 0x40400000,
+		.end	= 0x40400083,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_I2S,
+		.end	= IRQ_I2S,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2s_device = {
+	.name		= "pxa2xx-i2s",
+	.id		= -1,
+	.resource	= i2c_resources,
+	.num_resources	= ARRAY_SIZE(i2s_resources),
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pxamci_device,
 	&udc_device,
@@ -253,6 +277,7 @@ static struct platform_device *devices[] __initdata = {
 	&btuart_device,
 	&stuart_device,
 	&i2c_device,
+	&i2s_device,
 };
 
 static int __init pxa_init(void)

arch/arm/mach-pxa/spitz.c

@@ -36,7 +36,6 @@
 #include <asm/arch/irq.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
-#include <asm/arch/ohci.h>
 #include <asm/arch/pxafb.h>
 #include <asm/arch/akita.h>
 #include <asm/arch/spitz.h>
@@ -304,7 +303,6 @@ static struct platform_device *devices[] __initdata = {
 	&spitzkbd_device,
 	&spitzts_device,
 	&spitzbl_device,
-	&spitzbattery_device,
 };
 
 static void __init common_init(void)
@@ -328,7 +326,7 @@ static void __init common_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
-	pxafb_device.dev.parent = &spitzssp_device.dev;
+	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
 }
 

arch/arm/mach-s3c2410/Kconfig

@@ -12,6 +12,7 @@ config MACH_ANUBIS
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
+	select ISA
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)

arch/arm/mach-s3c2410/clock.c

@@ -98,7 +98,10 @@ struct clk *clk_get(struct device *dev, const char *id)
 	struct clk *clk = ERR_PTR(-ENOENT);
 	int idno;
 
-	idno = (dev == NULL) ? -1 : to_platform_device(dev)->id;
+	if (dev == NULL || dev->bus != &platform_bus_type)
+		idno = -1;
+	else
+		idno = to_platform_device(dev)->id;
 
 	down(&clocks_sem);
 

arch/arm/mach-s3c2410/mach-anubis.c

@@ -125,7 +125,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,

arch/arm/mach-s3c2410/mach-bast.c

@@ -230,7 +230,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -307,9 +307,9 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 }
 
 static struct s3c2410_platform_nand bast_nand_info = {
-	.tacls		= 40,
-	.twrph0		= 80,
-	.twrph1		= 80,
+	.tacls		= 30,
+	.twrph0		= 60,
+	.twrph1		= 60,
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
@@ -340,7 +340,7 @@ static struct resource bast_dm9k_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data bast_dm9k_platdata = {
+static struct dm9000_plat_data bast_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY
 };
 

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -288,7 +288,7 @@ static struct resource vr1000_dm9k1_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data vr1000_dm9k_platdata = {
+static struct dm9000_plat_data vr1000_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY,
 };
 

arch/arm/mach-s3c2410/s3c2410.c

@@ -125,9 +125,6 @@ static struct platform_device *uart_devices[] __initdata = {
 	&s3c_uart2
 };
 
-/* store our uart devices for the serial driver console */
-struct platform_device *s3c2410_uart_devices[3];
-
 static int s3c2410_uart_count = 0;
 
 /* uart registration process */

arch/arm/mach-s3c2410/s3c2440.c

@@ -151,7 +151,7 @@ void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 #ifdef CONFIG_PM
 
-struct sleep_save s3c2440_sleep[] = {
+static struct sleep_save s3c2440_sleep[] = {
 	SAVE_ITEM(S3C2440_DSC0),
 	SAVE_ITEM(S3C2440_DSC1),
 	SAVE_ITEM(S3C2440_GPJDAT),
@@ -260,7 +260,7 @@ void __init s3c2440_init_clocks(int xtal)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-int __init s3c2440_core_init(void)
+static int __init s3c2440_core_init(void)
 {
 	return sysdev_class_register(&s3c2440_sysclass);
 }

arch/arm/mach-s3c2410/time.c

@@ -38,6 +38,7 @@
 #include <asm/hardware/clock.h>
 
 #include "clock.h"
+#include "cpu.h"
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;

arch/arm/mm/alignment.c

@@ -111,7 +111,7 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 }
 
 static int proc_alignment_write(struct file *file, const char __user *buffer,
-			       unsigned long count, void *data)
+				unsigned long count, void *data)
 {
 	char mode;
 
@@ -119,7 +119,7 @@ static int proc_alignment_write(struct file *file, const char __user *buffer,
 		if (get_user(mode, buffer))
 			return -EFAULT;
 		if (mode >= '0' && mode <= '5')
-			   ai_usermode = mode - '0';
+			ai_usermode = mode - '0';
 	}
 	return count;
 }
@@ -262,7 +262,7 @@ union offset_union {
 			goto fault;				\
 	} while (0)
 
-#define put32_unaligned_check(val,addr)	 \
+#define put32_unaligned_check(val,addr) \
 	__put32_unaligned_check("strb", val, addr)
 
 #define put32t_unaligned_check(val,addr) \
@@ -306,19 +306,19 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 	return TYPE_LDST;
 
  user:
- 	if (LDST_L_BIT(instr)) {
- 		unsigned long val;
- 		get16t_unaligned_check(val, addr);
+	if (LDST_L_BIT(instr)) {
+		unsigned long val;
+		get16t_unaligned_check(val, addr);
 
- 		/* signed half-word? */
- 		if (instr & 0x40)
- 			val = (signed long)((signed short) val);
+		/* signed half-word? */
+		if (instr & 0x40)
+			val = (signed long)((signed short) val);
 
- 		regs->uregs[rd] = val;
- 	} else
- 		put16t_unaligned_check(regs->uregs[rd], addr);
+		regs->uregs[rd] = val;
+	} else
+		put16t_unaligned_check(regs->uregs[rd], addr);
 
- 	return TYPE_LDST;
+	return TYPE_LDST;
 
  fault:
 	return TYPE_FAULT;
@@ -342,11 +342,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32_unaligned_check(regs->uregs[rd], addr);
-		put32_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
@@ -356,11 +356,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32t_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32t_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32t_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32t_unaligned_check(regs->uregs[rd], addr);
-		put32t_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32t_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
@@ -443,7 +443,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 	if (LDST_P_EQ_U(instr))	/* U = P */
 		eaddr += 4;
 
-	/* 
+	/*
 	 * For alignment faults on the ARM922T/ARM920T the MMU  makes
 	 * the FSR (and hence addr) equal to the updated base address
 	 * of the multiple access rather than the restored value.
@@ -570,7 +570,7 @@ thumb2arm(u16 tinstr)
 	/* 6.5.1 Format 3: */
 	case 0x4800 >> 11:				/* 7.1.28 LDR(3) */
 		/* NOTE: This case is not technically possible. We're
-		 * 	 loading 32-bit memory data via PC relative
+		 *	 loading 32-bit memory data via PC relative
 		 *	 addressing mode. So we can and should eliminate
 		 *	 this case. But I'll leave it here for now.
 		 */
@@ -642,7 +642,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (fault) {
 		type = TYPE_FAULT;
- 		goto bad_or_fault;
+		goto bad_or_fault;
 	}
 
 	if (user_mode(regs))

arch/arm/mm/proc-v6.S

@@ -55,7 +55,14 @@ ENTRY(cpu_v6_proc_init)
 	mov	pc, lr
 
 ENTRY(cpu_v6_proc_fin)
-	mov	pc, lr
+	stmfd	sp!, {lr}
+	cpsid	if				@ disable interrupts
+	bl	v6_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
 
 /*
  *	cpu_v6_reset(loc)

arch/arm/nwfpe/fpa11.c

@@ -31,11 +31,6 @@
 #include <linux/string.h>
 #include <asm/system.h>
 
-/* forward declarations */
-unsigned int EmulateCPDO(const unsigned int);
-unsigned int EmulateCPDT(const unsigned int);
-unsigned int EmulateCPRT(const unsigned int);
-
 /* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
 static void resetFPA11(void)
 {

arch/arm/nwfpe/fpa11.h

@@ -95,4 +95,24 @@ extern int8 SetRoundingMode(const unsigned int);
 extern int8 SetRoundingPrecision(const unsigned int);
 extern void nwfpe_init_fpa(union fp_state *fp);
 
+extern unsigned int EmulateAll(unsigned int opcode);
+
+extern unsigned int EmulateCPDT(const unsigned int opcode);
+extern unsigned int EmulateCPDO(const unsigned int opcode);
+extern unsigned int EmulateCPRT(const unsigned int opcode);
+
+/* fpa11_cpdt.c */
+extern unsigned int PerformLDF(const unsigned int opcode);
+extern unsigned int PerformSTF(const unsigned int opcode);
+extern unsigned int PerformLFM(const unsigned int opcode);
+extern unsigned int PerformSFM(const unsigned int opcode);
+
+/* single_cpdo.c */
+
+extern unsigned int SingleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+/* double_cpdo.c */
+extern unsigned int DoubleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+
 #endif

arch/arm/nwfpe/fpa11_cprt.c

@@ -26,12 +26,11 @@
 #include "fpa11.inl"
 #include "fpmodule.h"
 #include "fpmodule.inl"
+#include "softfloat.h"
 
 #ifdef CONFIG_FPE_NWFPE_XP
 extern flag floatx80_is_nan(floatx80);
 #endif
-extern flag float64_is_nan(float64);
-extern flag float32_is_nan(float32);
 
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);

arch/arm/nwfpe/fpopcode.h

@@ -476,4 +476,10 @@ static inline unsigned int getDestinationSize(const unsigned int opcode)
 	return (nRc);
 }
 
+extern unsigned int checkCondition(const unsigned int opcode,
+				   const unsigned int ccodes);
+
+extern const float64 float64Constant[];
+extern const float32 float32Constant[];
+
 #endif

arch/arm/nwfpe/softfloat.h

@@ -265,4 +265,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b)
 	return (a != b) && (aSign ^ (a < b));
 }
 
+extern flag float32_is_nan( float32 a );
+extern flag float64_is_nan( float64 a );
+
 #endif

arch/cris/arch-v32/kernel/smp.c

@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #define IPI_SCHEDULE 1
 #define IPI_CALL 2
@@ -28,6 +29,7 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED};
 /* CPU masks */
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+EXPORT_SYMBOL(phys_cpu_present_map);
 
 /* Variables used during SMP boot */
 volatile int cpu_now_booting = 0;

arch/i386/kernel/cpu/cpufreq/powernow-k8.c

@@ -44,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.50.3"
+#define VERSION "version 1.50.4"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -111,8 +111,8 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data)
 	u32 i = 0;
 
 	do {
-		if (i++ > 0x1000000) {
-			printk(KERN_ERR PFX "detected change pending stuck\n");
+		if (i++ > 10000) {
+			dprintk("detected change pending stuck\n");
 			return 1;
 		}
 		rdmsr(MSR_FIDVID_STATUS, lo, hi);
@@ -159,6 +159,7 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 {
 	u32 lo;
 	u32 savevid = data->currvid;
+	u32 i = 0;
 
 	if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on fid write\n");
@@ -170,10 +171,13 @@ static int write_new_fid(struct powernow_k8_data *data, u32 fid)
 	dprintk("writing fid 0x%x, lo 0x%x, hi 0x%x\n",
 		fid, lo, data->plllock * PLL_LOCK_CONVERSION);
 
-	wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
+		if (i++ > 100) {
+			printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+			return 1;
+		}			
+	} while (query_current_values_with_pending_wait(data));
 
 	count_off_irt(data);
 
@@ -197,6 +201,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 {
 	u32 lo;
 	u32 savefid = data->currfid;
+	int i = 0;
 
 	if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
 		printk(KERN_ERR PFX "internal error - overflow on vid write\n");
@@ -208,10 +213,13 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 	dprintk("writing vid 0x%x, lo 0x%x, hi 0x%x\n",
 		vid, lo, STOP_GRANT_5NS);
 
-	wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
-
-	if (query_current_values_with_pending_wait(data))
-		return 1;
+	do {
+		wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
+                if (i++ > 100) {
+                        printk(KERN_ERR PFX "internal error - pending bit very stuck - no further pstate changes possible\n");
+                        return 1;
+                }
+	} while (query_current_values_with_pending_wait(data));
 
 	if (savefid != data->currfid) {
 		printk(KERN_ERR PFX "fid changed on vid trans, old 0x%x new 0x%x\n",

arch/ia64/lib/swiotlb.c

@@ -123,8 +123,8 @@ swiotlb_init_with_default_size (size_t default_size)
 	/*
 	 * Get IO TLB memory from the low pages
 	 */
-	io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs *
-					       (1 << IO_TLB_SHIFT));
+	io_tlb_start = alloc_bootmem_low_pages_limit(io_tlb_nslabs *
+					     (1 << IO_TLB_SHIFT), 0x100000000);
 	if (!io_tlb_start)
 		panic("Cannot allocate SWIOTLB buffer");
 	io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);

arch/m32r/kernel/smp.c

@@ -275,12 +275,14 @@ static void flush_tlb_all_ipi(void *info)
  *==========================================================================*/
 void smp_flush_tlb_mm(struct mm_struct *mm)
 {
-	int cpu_id = smp_processor_id();
+	int cpu_id;
 	cpumask_t cpu_mask;
-	unsigned long *mmc = &mm->context[cpu_id];
+	unsigned long *mmc;
 	unsigned long flags;
 
 	preempt_disable();
+	cpu_id = smp_processor_id();
+	mmc = &mm->context[cpu_id];
 	cpu_mask = mm->cpu_vm_mask;
 	cpu_clear(cpu_id, cpu_mask);
 
@@ -343,12 +345,14 @@ void smp_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
 void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va)
 {
 	struct mm_struct *mm = vma->vm_mm;
-	int cpu_id = smp_processor_id();
+	int cpu_id;
 	cpumask_t cpu_mask;
-	unsigned long *mmc = &mm->context[cpu_id];
+	unsigned long *mmc;
 	unsigned long flags;
 
 	preempt_disable();
+	cpu_id = smp_processor_id();
+	mmc = &mm->context[cpu_id];
 	cpu_mask = mm->cpu_vm_mask;
 	cpu_clear(cpu_id, cpu_mask);
 

arch/mips/pci/fixup-tb0226.c

@@ -1,7 +1,7 @@
 /*
  *  fixup-tb0226.c, The TANBAC TB0226 specific PCI fixups.
  *
- *  Copyright (C) 2002-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *  Copyright (C) 2002-2005  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 
+#include <asm/vr41xx/giu.h>
 #include <asm/vr41xx/tb0226.h>
 
 int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
@@ -29,42 +30,42 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	switch (slot) {
 	case 12:
 		vr41xx_set_irq_trigger(GD82559_1_PIN,
-				       TRIGGER_LEVEL,
-				       SIGNAL_THROUGH);
-		vr41xx_set_irq_level(GD82559_1_PIN, LEVEL_LOW);
+				       IRQ_TRIGGER_LEVEL,
+				       IRQ_SIGNAL_THROUGH);
+		vr41xx_set_irq_level(GD82559_1_PIN, IRQ_LEVEL_LOW);
 		irq = GD82559_1_IRQ;
 		break;
 	case 13:
 		vr41xx_set_irq_trigger(GD82559_2_PIN,
-				       TRIGGER_LEVEL,
-				       SIGNAL_THROUGH);
-		vr41xx_set_irq_level(GD82559_2_PIN, LEVEL_LOW);
+				       IRQ_TRIGGER_LEVEL,
+				       IRQ_SIGNAL_THROUGH);
+		vr41xx_set_irq_level(GD82559_2_PIN, IRQ_LEVEL_LOW);
 		irq = GD82559_2_IRQ;
 		break;
 	case 14:
 		switch (pin) {
 		case 1:
 			vr41xx_set_irq_trigger(UPD720100_INTA_PIN,
-					       TRIGGER_LEVEL,
-					       SIGNAL_THROUGH);
+					       IRQ_TRIGGER_LEVEL,
+					       IRQ_SIGNAL_THROUGH);
 			vr41xx_set_irq_level(UPD720100_INTA_PIN,
-					     LEVEL_LOW);
+					     IRQ_LEVEL_LOW);
 			irq = UPD720100_INTA_IRQ;
 			break;
 		case 2:
 			vr41xx_set_irq_trigger(UPD720100_INTB_PIN,
-					       TRIGGER_LEVEL,
-					       SIGNAL_THROUGH);
+					       IRQ_TRIGGER_LEVEL,
+					       IRQ_SIGNAL_THROUGH);
 			vr41xx_set_irq_level(UPD720100_INTB_PIN,
-					     LEVEL_LOW);
+					     IRQ_LEVEL_LOW);
 			irq = UPD720100_INTB_IRQ;
 			break;
 		case 3:
 			vr41xx_set_irq_trigger(UPD720100_INTC_PIN,
-					       TRIGGER_LEVEL,
-					       SIGNAL_THROUGH);
+					       IRQ_TRIGGER_LEVEL,
+					       IRQ_SIGNAL_THROUGH);
 			vr41xx_set_irq_level(UPD720100_INTC_PIN,
-					     LEVEL_LOW);
+					     IRQ_LEVEL_LOW);
 			irq = UPD720100_INTC_IRQ;
 			break;
 		default:

arch/powerpc/kernel/cputable.c

@@ -303,7 +303,7 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "601",
 		.cpu_features		= CPU_FTRS_PPC601,
 		.cpu_user_features	= COMMON_USER | PPC_FEATURE_601_INSTR |
-			PPC_FEATURE_UNIFIED_CACHE,
+			PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 	},
@@ -724,7 +724,8 @@ struct cpu_spec	cpu_specs[] = {
 		.pvr_value		= 0x00201400,
 		.cpu_name		= "403GCX",
 		.cpu_features		= CPU_FTRS_40X,
-		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.cpu_user_features	= PPC_FEATURE_32 |
+		 	PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
 	},

arch/powerpc/mm/mem.c

@@ -477,8 +477,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
 	if (cpus_equal(vma->vm_mm->cpu_vm_mask, tmp))
 		local = 1;
 
-	__hash_page(address, pte_val(pte) & (_PAGE_USER|_PAGE_RW), vsid, ptep,
-		    0x300, local);
+	__hash_page(address, 0, vsid, ptep, 0x300, local);
 	local_irq_restore(flags);
 #endif
 #endif

arch/powerpc/platforms/iseries/htab.c

@@ -68,7 +68,7 @@ static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va,
 	}
 
 	if (slot < 0) {		/* MSB set means secondary group */
-		vflags |= HPTE_V_VALID;
+		vflags |= HPTE_V_SECONDARY;
 		secondary = 1;
 		slot &= 0x7fffffffffffffff;
 	}

arch/powerpc/platforms/powermac/setup.c

@@ -669,7 +669,7 @@ static int pmac_check_legacy_ioport(unsigned int baseport)
 
 static int __init pmac_declare_of_platform_devices(void)
 {
-	struct device_node *np;
+	struct device_node *np, *npp;
 
 	np = find_devices("uni-n");
 	if (np) {
@@ -687,14 +687,16 @@ static int __init pmac_declare_of_platform_devices(void)
 	if (np)
 		of_platform_device_create(np, "platinum", NULL);
 
-	np = find_devices("u3");
-	if (np) {
-		for (np = np->child; np != NULL; np = np->sibling)
+	npp = of_find_node_by_name(NULL, "u3");
+	if (npp) {
+		for (np = NULL; (np = of_get_next_child(npp, np)) != NULL;) {
 			if (strncmp(np->name, "i2c", 3) == 0) {
-				of_platform_device_create(np, "u3-i2c",
-							  NULL);
+				of_platform_device_create(np, "u3-i2c", NULL);
+				of_node_put(np);
 				break;
 			}
+		}
+		of_node_put(npp);
 	}
         np = of_find_node_by_type(NULL, "smu");
         if (np) {

arch/ppc64/configs/bpa_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:12:19 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:29:10 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
@@ -36,6 +37,7 @@ CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -95,6 +97,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PREEMPT_NONE=y
@@ -110,17 +113,18 @@ CONFIG_PPC_RTAS=y
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -132,8 +136,6 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -163,8 +165,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -181,6 +183,7 @@ CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -188,11 +191,14 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=y
 # CONFIG_IP_NF_CT_ACCT is not set
 # CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
 CONFIG_IP_NF_CT_PROTO_SCTP=y
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -216,13 +222,16 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -240,6 +249,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_TARGET_NOTRACK=m
 CONFIG_IP_NF_ARPTABLES=m
@@ -251,6 +261,12 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_IP6_NF_QUEUE is not set
 # CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
@@ -278,6 +294,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -291,6 +308,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -322,7 +344,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -395,6 +416,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -435,6 +457,11 @@ CONFIG_NETDEVICES=y
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -442,6 +469,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -462,15 +490,18 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 CONFIG_SKGE=m
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_SPIDER_NET is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -552,6 +583,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_ROCKETPORT is not set
 # CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
@@ -642,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -656,7 +687,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -683,11 +713,16 @@ CONFIG_I2C_ALGOBIT=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -756,10 +791,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,6 +799,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -794,13 +826,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -846,6 +876,7 @@ CONFIG_SUNRPC=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -923,6 +954,7 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -981,7 +1013,12 @@ CONFIG_CRYPTO_DEFLATE=m
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/ppc64/configs/g5_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:16:59 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:30:23 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +38,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -97,6 +99,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT_NONE=y
@@ -109,19 +112,20 @@ CONFIG_HZ_250=y
 CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
-# CONFIG_HOTPLUG_CPU is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -132,8 +136,6 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -163,8 +165,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -175,6 +177,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -182,11 +185,14 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -210,14 +216,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -235,6 +245,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -243,6 +254,11 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@@ -270,6 +286,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -283,6 +300,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -315,7 +337,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -395,6 +416,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -422,6 +444,7 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -435,10 +458,12 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
@@ -498,6 +523,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -540,7 +566,6 @@ CONFIG_IEEE1394_RAWIO=y
 #
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
-# CONFIG_PMAC_BACKLIGHT is not set
 CONFIG_THERM_PM72=y
 
 #
@@ -557,6 +582,11 @@ CONFIG_TUN=m
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -564,6 +594,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -585,6 +616,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=m
@@ -594,6 +626,7 @@ CONFIG_TIGON3=m
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -760,8 +793,8 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -775,7 +808,6 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -802,11 +834,16 @@ CONFIG_I2C_KEYWEST=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -856,6 +893,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -937,6 +975,7 @@ CONFIG_USB_STORAGE_DPCM=y
 CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -956,9 +995,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -983,30 +1024,14 @@ CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_GL620A is not set
+# CONFIG_USB_NET_NET1080 is not set
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+# CONFIG_USB_NET_ZAURUS is not set
 CONFIG_USB_MON=y
 
 #
@@ -1124,16 +1149,12 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1141,6 +1162,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1168,14 +1190,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1225,6 +1244,7 @@ CONFIG_CIFS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1303,6 +1323,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1360,7 +1381,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/ppc64/configs/iSeries_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:02 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:30:56 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -38,6 +39,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -88,6 +90,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT_NONE=y
@@ -101,17 +104,16 @@ CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -152,8 +154,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -164,6 +166,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
 
 #
 # IP: Netfilter Configuration
@@ -171,11 +174,14 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -199,14 +205,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -224,6 +234,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -232,6 +243,11 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@@ -259,6 +275,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -272,6 +289,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -303,7 +325,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -323,6 +344,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -350,6 +372,7 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -363,6 +386,7 @@ CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -415,6 +439,7 @@ CONFIG_DM_ZERO=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -444,6 +469,11 @@ CONFIG_TUN=m
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -451,6 +481,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -489,6 +520,7 @@ CONFIG_E1000=m
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -498,6 +530,7 @@ CONFIG_E1000=m
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -632,7 +665,6 @@ CONFIG_MAX_RAW_DEVS=256
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -643,11 +675,16 @@ CONFIG_MAX_RAW_DEVS=256
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -722,16 +759,12 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -739,6 +772,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -766,14 +800,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -824,6 +855,7 @@ CONFIG_CIFS_POSIX=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -897,6 +929,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -954,7 +987,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/ppc64/configs/maple_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:04 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:31:24 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +38,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -97,6 +99,7 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_NUMA is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PREEMPT_NONE=y
@@ -109,17 +112,18 @@ CONFIG_HZ_250=y
 CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -131,8 +135,6 @@ CONFIG_PCI_NAMES=y
 # PCI Hotplug Support
 #
 # CONFIG_HOTPLUG_PCI is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -163,13 +165,18 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@@ -196,6 +203,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -209,6 +217,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -240,7 +253,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_INITRD is not set
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -313,6 +325,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -353,6 +366,11 @@ CONFIG_NETDEVICES=y
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -360,6 +378,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 
 #
@@ -398,6 +417,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -408,6 +428,7 @@ CONFIG_E1000=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -553,7 +574,6 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
@@ -567,7 +587,6 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -594,11 +613,16 @@ CONFIG_I2C_AMD8111=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -681,9 +705,11 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -814,10 +840,6 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -826,6 +848,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -849,14 +872,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-# CONFIG_DEVPTS_FS_SECURITY is not set
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -898,6 +918,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -975,6 +996,7 @@ CONFIG_NLS_UTF8=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1034,6 +1056,7 @@ CONFIG_CRYPTO_DES=y
 # Library routines
 #
 CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y

arch/ppc64/configs/pSeries_defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:17:07 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:32:17 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -38,6 +39,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
@@ -104,6 +106,7 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 CONFIG_NUMA=y
@@ -124,19 +127,20 @@ CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
 CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
 # CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_CPU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -152,8 +156,6 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -183,8 +185,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-CONFIG_IP_TCPDIAG=m
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -195,6 +197,9 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -202,11 +207,15 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -230,14 +239,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -255,6 +268,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -263,6 +277,11 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@@ -290,6 +309,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -303,6 +323,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -342,7 +367,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -416,6 +440,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -443,6 +468,7 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -456,6 +482,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -517,6 +544,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -546,6 +574,11 @@ CONFIG_TUN=m
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -553,6 +586,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -581,6 +615,7 @@ CONFIG_E100=y
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -594,6 +629,7 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
@@ -604,6 +640,7 @@ CONFIG_TIGON3=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
@@ -789,7 +826,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -804,7 +840,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -831,11 +866,16 @@ CONFIG_I2C_ALGOBIT=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -885,6 +925,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -982,9 +1023,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1057,7 +1100,8 @@ CONFIG_USB_MON=y
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_VERBS=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -1095,16 +1139,12 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1112,6 +1152,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1139,14 +1180,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1197,6 +1235,7 @@ CONFIG_CIFS_POSIX=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1261,6 +1300,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1320,7 +1360,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/ppc64/defconfig

@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc6
-# Mon Aug  8 14:16:54 2005
+# Linux kernel version: 2.6.14-rc4
+# Thu Oct 20 08:28:33 2005
 #
 CONFIG_64BIT=y
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_ISA_DMA=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 
 #
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -37,6 +38,7 @@ CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
@@ -106,6 +108,7 @@ CONFIG_DISCONTIGMEM_MANUAL=y
 CONFIG_DISCONTIGMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 # CONFIG_NUMA is not set
@@ -126,19 +129,20 @@ CONFIG_RTAS_FLASH=m
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
 CONFIG_SECCOMP=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_HOTPLUG_CPU=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 CONFIG_ISA_DMA_API=y
 
 #
-# General setup
+# Bus Options
 #
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
 # CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
 # CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_CPU=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -154,8 +158,6 @@ CONFIG_HOTPLUG_PCI=m
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Networking
@@ -185,8 +187,8 @@ CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
 CONFIG_INET_TUNNEL=y
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 
@@ -197,6 +199,9 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_NETLINK=y
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
 
 #
 # IP: Netfilter Configuration
@@ -204,11 +209,15 @@ CONFIG_NETFILTER=y
 CONFIG_IP_NF_CONNTRACK=m
 CONFIG_IP_NF_CT_ACCT=y
 CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
 CONFIG_IP_NF_CT_PROTO_SCTP=m
 CONFIG_IP_NF_FTP=m
 CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_LIMIT=m
@@ -232,14 +241,18 @@ CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_REALM=m
 CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
 CONFIG_IP_NF_MATCH_COMMENT=m
 CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
 CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -257,6 +270,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_MARK=m
 CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CONNMARK=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
@@ -265,6 +279,11 @@ CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
@@ -292,6 +311,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -305,6 +325,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
 #
 # Memory Technology Devices (MTD)
 #
@@ -344,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CDROM_PKTCDVD is not set
 
 #
@@ -422,6 +446,7 @@ CONFIG_IDEDMA_AUTO=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -449,6 +474,7 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
 
 #
 # SCSI low-level drivers
@@ -462,10 +488,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
 CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_SATA_AHCI is not set
 CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
@@ -535,6 +563,7 @@ CONFIG_DM_MULTIPATH_EMC=m
 # CONFIG_FUSION is not set
 # CONFIG_FUSION_SPI is not set
 # CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -578,7 +607,6 @@ CONFIG_IEEE1394_AMDTP=m
 #
 CONFIG_ADB_PMU=y
 CONFIG_PMAC_SMU=y
-# CONFIG_PMAC_BACKLIGHT is not set
 CONFIG_THERM_PM72=y
 
 #
@@ -595,6 +623,11 @@ CONFIG_TUN=m
 #
 # CONFIG_ARCNET is not set
 
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
 #
 # Ethernet (10 or 100Mbit)
 #
@@ -602,6 +635,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
 CONFIG_NET_VENDOR_3COM=y
 CONFIG_VORTEX=y
 # CONFIG_TYPHOON is not set
@@ -630,6 +664,7 @@ CONFIG_E100=y
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -643,16 +678,19 @@ CONFIG_E1000=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+# CONFIG_SPIDER_NET is not set
 # CONFIG_MV643XX_ETH is not set
 
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
@@ -838,8 +876,8 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
 CONFIG_I2C_KEYWEST=y
+CONFIG_I2C_PMAC_SMU=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
@@ -854,7 +892,6 @@ CONFIG_I2C_KEYWEST=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -881,11 +918,16 @@ CONFIG_I2C_KEYWEST=y
 # Hardware Monitoring support
 #
 # CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
 
 #
 # Misc devices
 #
 
+#
+# Multimedia Capabilities Port drivers
+#
+
 #
 # Multimedia devices
 #
@@ -939,6 +981,7 @@ CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_KYRO is not set
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -1020,6 +1063,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_SDDR09 is not set
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 
 #
 # USB Input Devices
@@ -1036,9 +1080,11 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MTOUCH is not set
 # CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
 
 #
 # USB Imaging devices
@@ -1111,7 +1157,8 @@ CONFIG_USB_PEGASUS=y
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_VERBS=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -1149,16 +1196,12 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_DEBUG is not set
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
 CONFIG_XFS_FS=m
 CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
@@ -1166,6 +1209,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1192,14 +1236,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
 CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -1250,6 +1291,7 @@ CONFIG_CIFS_POSIX=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1328,6 +1370,7 @@ CONFIG_OPROFILE=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
+CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1387,7 +1430,12 @@ CONFIG_CRYPTO_TEST=m
 # Library routines
 #
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m

arch/ppc64/kernel/vdso32/gettimeofday.S

@@ -109,7 +109,7 @@ __do_get_xsec:
 	lwz	r6,(CFG_TB_TO_XS+4)(r9)
 	mulhwu	r4,r7,r5
 	mulhwu	r6,r7,r6
-	mullw	r6,r7,r5
+	mullw	r0,r7,r5
 	addc	r6,r6,r0
 
 	/* At this point, we have the scaled xsec value in r4 + XER:CA

arch/sh/kernel/smp.c

@@ -22,6 +22,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 #include <asm/atomic.h>
 #include <asm/processor.h>
@@ -39,6 +40,8 @@ struct sh_cpuinfo cpu_data[NR_CPUS];
 extern void per_cpu_trap_init(void);
 
 cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
+
 cpumask_t cpu_online_map;
 static atomic_t cpus_booted = ATOMIC_INIT(0);
 

arch/sparc64/kernel/dtlb_base.S

@@ -53,19 +53,18 @@
  * be guaranteed to be 0 ... mmu_context.h does guarantee this
  * by only using 10 bits in the hwcontext value.
  */
-#define CREATE_VPTE_OFFSET1(r1, r2)
+#define CREATE_VPTE_OFFSET1(r1, r2) nop
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_NOP		nop
 #else
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif
 
 /* DTLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_DMMU, %g4	! Get TAG_ACCESS
 	andcc		%g4, TAG_CONTEXT_BITS, %g0	! From Nucleus?
 from_tl1_trap:
@@ -74,18 +73,16 @@ from_tl1_trap:
 	be,pn		%xcc, kvmap			! Yep, special processing
 	 CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
 	cmp		%g5, 4				! Last trap level?
-	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
-	 nop						! delay slot
 
 /* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses	*/
+	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
+	 nop						! delay slot
 	ldxa		[%g3 + %g6] ASI_S, %g5		! Load VPTE
 1:	brgez,pn	%g5, longpath			! Invalid, branch out
 	 nop						! Delay-slot
 9:	stxa		%g5, [%g0] ASI_DTLB_DATA_IN	! Reload TLB
 	retry						! Trap return
 	nop
-	nop
-	nop
 
 /* DTLB ** ICACHE line 3: winfixups+real_faults		*/
 longpath:
@@ -106,8 +103,7 @@ longpath:
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
+	nop
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP

arch/sparc64/kernel/dtlb_prot.S

@@ -14,14 +14,14 @@
  */
 
 /* PROT ** ICACHE line 1: User DTLB protection trap	*/
-	stxa		%g0, [%g1] ASI_DMMU		! Clear SFSR FaultValid bit
-	membar		#Sync				! Synchronize ASI stores
-	rdpr		%pstate, %g5			! Move into alternate globals
+	mov		TLB_SFSR, %g1
+	stxa		%g0, [%g1] ASI_DMMU		! Clear FaultValid bit
+	membar		#Sync				! Synchronize stores
+	rdpr		%pstate, %g5			! Move into alt-globals
 	wrpr		%g5, PSTATE_AG|PSTATE_MG, %pstate
-	rdpr		%tl, %g1			! Need to do a winfixup?
+	rdpr		%tl, %g1			! Need a winfixup?
 	cmp		%g1, 1				! Trap level >1?
-	mov		TLB_TAG_ACCESS, %g4		! Prepare reload of vaddr
-	nop
+	mov		TLB_TAG_ACCESS, %g4		! For reload of vaddr
 
 /* PROT ** ICACHE line 2: More real fault processing */
 	bgu,pn		%xcc, winfix_trampoline		! Yes, perform winfixup

arch/sparc64/kernel/head.S

@@ -28,19 +28,14 @@
 #include <asm/mmu.h>
 	
 /* This section from from _start to sparc64_boot_end should fit into
- * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space
- * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to
- * 0x0000.0000.0040.6000 and empty_bad_page, which is from
- * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000. 
+ * 0x0000000000404000 to 0x0000000000408000.
  */
-
 	.text
 	.globl	start, _start, stext, _stext
 _start:
 start:
 _stext:
 stext:
-bootup_user_stack:
 ! 0x0000000000404000
 	b	sparc64_boot
 	 flushw					/* Flush register file.      */
@@ -392,31 +387,30 @@ tlb_fixup_done:
 	 * former does use this code, the latter does not yet due
 	 * to some complexities.  That should be fixed up at some
 	 * point.
+	 *
+	 * There used to be enormous complexity wrt. transferring
+	 * over from the firwmare's trap table to the Linux kernel's.
+	 * For example, there was a chicken & egg problem wrt. building
+	 * the OBP page tables, yet needing to be on the Linux kernel
+	 * trap table (to translate PAGE_OFFSET addresses) in order to
+	 * do that.
+	 *
+	 * We now handle OBP tlb misses differently, via linear lookups
+	 * into the prom_trans[] array.  So that specific problem no
+	 * longer exists.  Yet, unfortunately there are still some issues
+	 * preventing trampoline.S from using this code... ho hum.
 	 */
 	.globl	setup_trap_table
 setup_trap_table:
 	save	%sp, -192, %sp
 
-	/* Force interrupts to be disabled.  Transferring over to
-	 * the Linux trap table is a very delicate operation.
-	 * Until we are actually on the Linux trap table, we cannot
-	 * get the PAGE_OFFSET linear mappings translated.  We need
-	 * that mapping to be setup in order to initialize the firmware
-	 * page tables.
-	 *
-	 * So there is this window of time, from the return from
-	 * prom_set_trap_table() until inherit_prom_mappings_post()
-	 * (in arch/sparc64/mm/init.c) completes, during which no
-	 * firmware address space accesses can be made.
-	 */
+	/* Force interrupts to be disabled. */
 	rdpr	%pstate, %o1
 	andn	%o1, PSTATE_IE, %o1
 	wrpr	%o1, 0x0, %pstate
 	wrpr	%g0, 15, %pil
 
-	/* Ok, now make the final valid firmware call to jump over
-	 * to the Linux trap table.
-	 */
+	/* Make the firmware call to jump over to the Linux trap table.  */
 	call	prom_set_trap_table
 	 sethi	%hi(sparc64_ttable_tl0), %o0
 
@@ -540,15 +534,21 @@ setup_tba:	/* i0 = is_starfire */
 
 	ret
 	 restore
+sparc64_boot_end:
+
+#include "systbls.S"
+#include "ktlb.S"
+#include "etrap.S"
+#include "rtrap.S"
+#include "winfixup.S"
+#include "entry.S"
 
 /*
- * The following skips make sure the trap table in ttable.S is aligned
+ * The following skip makes sure the trap table in ttable.S is aligned
  * on a 32K boundary as required by the v9 specs for TBA register.
  */
-sparc64_boot_end:
-	.skip	0x2000 + _start - sparc64_boot_end
-bootup_user_stack_end:
-	.skip	0x2000
+1:
+	.skip	0x4000 + _start - 1b
 
 #ifdef CONFIG_SBUS
 /* This is just a hack to fool make depend config.h discovering
@@ -560,15 +560,6 @@ bootup_user_stack_end:
 ! 0x0000000000408000
 
 #include "ttable.S"
-#include "systbls.S"
-#include "ktlb.S"
-#include "etrap.S"
-#include "rtrap.S"
-#include "winfixup.S"
-#include "entry.S"
-
-	/* This is just anal retentiveness on my part... */
-	.align	16384
 
 	.data
 	.align	8

arch/sparc64/kernel/itlb_base.S

@@ -15,14 +15,12 @@
  */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_OFFSET2(r1, r2)
-#define CREATE_VPTE_NOP		nop
+#define CREATE_VPTE_OFFSET2(r1, r2) nop
 #else /* PAGE_SHIFT */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif /* PAGE_SHIFT */
 
 
@@ -36,6 +34,7 @@
  */
 
 /* ITLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_IMMU, %g4	! Get TAG_ACCESS
 	CREATE_VPTE_OFFSET1(%g4, %g6)			! Create VPTE offset
 	CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
@@ -43,41 +42,38 @@
 1:	brgez,pn	%g5, 3f				! Not valid, branch out
 	 sethi		%hi(_PAGE_EXEC), %g4		! Delay-slot
 	andcc		%g5, %g4, %g0			! Executable?
+
+/* ITLB ** ICACHE line 2: Real faults			*/
 	be,pn		%xcc, 3f			! Nope, branch.
 	 nop						! Delay-slot
 2:	stxa		%g5, [%g0] ASI_ITLB_DATA_IN	! Load PTE into TLB
 	retry						! Trap return
-3:	rdpr		%pstate, %g4			! Move into alternate globals
-
-/* ITLB ** ICACHE line 2: Real faults			*/
+3:	rdpr		%pstate, %g4			! Move into alt-globals
 	wrpr		%g4, PSTATE_AG|PSTATE_MG, %pstate
 	rdpr		%tpc, %g5			! And load faulting VA
 	mov		FAULT_CODE_ITLB, %g4		! It was read from ITLB
-sparc64_realfault_common:				! Called by TL0 dtlb_miss too
+
+/* ITLB ** ICACHE line 3: Finish faults	*/
+sparc64_realfault_common:				! Called by dtlb_miss
 	stb		%g4, [%g6 + TI_FAULT_CODE]
 	stx		%g5, [%g6 + TI_FAULT_ADDR]
 	ba,pt		%xcc, etrap			! Save state
 1:	 rd		%pc, %g7			! ...
-	nop
-
-/* ITLB ** ICACHE line 3: Finish faults + window fixups	*/
 	call		do_sparc64_fault		! Call fault handler
 	 add		%sp, PTREGS_OFF, %o0! Compute pt_regs arg
 	ba,pt		%xcc, rtrap_clr_l6		! Restore cpu state
 	 nop
+
+/* ITLB ** ICACHE line 4: Window fixups */
 winfix_trampoline:
 	rdpr		%tpc, %g3			! Prepare winfixup TNPC
-	or		%g3, 0x7c, %g3			! Compute offset to branch
+	or		%g3, 0x7c, %g3			! Compute branch offset
 	wrpr		%g3, %tnpc			! Write it into TNPC
 	done						! Do it to it
-
-/* ITLB ** ICACHE line 4: Unused...	*/
 	nop
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP

arch/sparc64/kernel/ktlb.S

@@ -58,9 +58,6 @@ vpte_noent:
 	done
 
 vpte_insn_obp:
-	sethi		%hi(prom_pmd_phys), %g5
-	ldx		[%g5 + %lo(prom_pmd_phys)], %g5
-
 	/* Behave as if we are at TL0.  */
 	wrpr		%g0, 1, %tl
 	rdpr		%tpc, %g4	/* Find original faulting iaddr */
@@ -71,58 +68,57 @@ vpte_insn_obp:
 	mov		TLB_SFSR, %g1
 	stxa		%g4, [%g1 + %g1] ASI_IMMU
 
-	/* Get PMD offset.  */
-	srlx		%g4, 23, %g6
-	and		%g6, 0x7ff, %g6
-	sllx		%g6, 2, %g6
-
-	/* Load PMD, is it valid?  */
-	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brz,pn		%g5, longpath
-	 sllx		%g5, 11, %g5
-
-	/* Get PTE offset.  */
-	srlx		%g4, 13, %g6
-	and		%g6, 0x3ff, %g6
-	sllx		%g6, 3, %g6
-
-	/* Load PTE.  */
-	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brgez,pn	%g5, longpath
-	 nop
-
-	/* TLB load and return from trap.  */
+	sethi		%hi(prom_trans), %g5
+	or		%g5, %lo(prom_trans), %g5
+
+1:	ldx		[%g5 + 0x00], %g6	! base
+	brz,a,pn	%g6, longpath		! no more entries, fail
+	 mov		TLB_SFSR, %g1		! and restore %g1
+	ldx		[%g5 + 0x08], %g1	! len
+	add		%g6, %g1, %g1		! end
+	cmp		%g6, %g4
+	bgu,pt		%xcc, 2f
+	 cmp		%g4, %g1
+	bgeu,pt		%xcc, 2f
+	 ldx		[%g5 + 0x10], %g1	! PTE
+
+	/* TLB load, restore %g1, and return from trap.  */
+	sub		%g4, %g6, %g6
+	add		%g1, %g6, %g5
+	mov		TLB_SFSR, %g1
 	stxa		%g5, [%g0] ASI_ITLB_DATA_IN
 	retry
 
-kvmap_do_obp:
-	sethi		%hi(prom_pmd_phys), %g5
-	ldx		[%g5 + %lo(prom_pmd_phys)], %g5
-
-	/* Get PMD offset.  */
-	srlx		%g4, 23, %g6
-	and		%g6, 0x7ff, %g6
-	sllx		%g6, 2, %g6
-
-	/* Load PMD, is it valid?  */
-	lduwa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brz,pn		%g5, longpath
-	 sllx		%g5, 11, %g5
-
-	/* Get PTE offset.  */
-	srlx		%g4, 13, %g6
-	and		%g6, 0x3ff, %g6
-	sllx		%g6, 3, %g6
-
-	/* Load PTE.  */
-	ldxa		[%g5 + %g6] ASI_PHYS_USE_EC, %g5
-	brgez,pn	%g5, longpath
-	 nop
+2:	ba,pt		%xcc, 1b
+	 add		%g5, (3 * 8), %g5	! next entry
 
-	/* TLB load and return from trap.  */
+kvmap_do_obp:
+	sethi		%hi(prom_trans), %g5
+	or		%g5, %lo(prom_trans), %g5
+	srlx		%g4, 13, %g4
+	sllx		%g4, 13, %g4
+
+1:	ldx		[%g5 + 0x00], %g6	! base
+	brz,a,pn	%g6, longpath		! no more entries, fail
+	 mov		TLB_SFSR, %g1		! and restore %g1
+	ldx		[%g5 + 0x08], %g1	! len
+	add		%g6, %g1, %g1		! end
+	cmp		%g6, %g4
+	bgu,pt		%xcc, 2f
+	 cmp		%g4, %g1
+	bgeu,pt		%xcc, 2f
+	 ldx		[%g5 + 0x10], %g1	! PTE
+
+	/* TLB load, restore %g1, and return from trap.  */
+	sub		%g4, %g6, %g6
+	add		%g1, %g6, %g5
+	mov		TLB_SFSR, %g1
 	stxa		%g5, [%g0] ASI_DTLB_DATA_IN
 	retry
 
+2:	ba,pt		%xcc, 1b
+	 add		%g5, (3 * 8), %g5	! next entry
+
 /*
  * On a first level data miss, check whether this is to the OBP range (note
  * that such accesses can be made by prom, as well as by kernel using

arch/sparc64/kernel/pci_iommu.c

@@ -49,12 +49,6 @@ static void __iommu_flushall(struct pci_iommu *iommu)
 
 	/* Ensure completion of previous PIO writes. */
 	(void) pci_iommu_read(iommu->write_complete_reg);
-
-	/* Now update everyone's flush point. */
-	for (entry = 0; entry < PBM_NCLUSTERS; entry++) {
-		iommu->alloc_info[entry].flush =
-			iommu->alloc_info[entry].next;
-	}
 }
 
 #define IOPTE_CONSISTENT(CTX) \
@@ -80,120 +74,117 @@ static void inline iopte_make_dummy(struct pci_iommu *iommu, iopte_t *iopte)
 	iopte_val(*iopte) = val;
 }
 
-void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize)
+/* Based largely upon the ppc64 iommu allocator.  */
+static long pci_arena_alloc(struct pci_iommu *iommu, unsigned long npages)
 {
-	int i;
-
-	tsbsize /= sizeof(iopte_t);
-
-	for (i = 0; i < tsbsize; i++)
-		iopte_make_dummy(iommu, &iommu->page_table[i]);
-}
-
-static iopte_t *alloc_streaming_cluster(struct pci_iommu *iommu, unsigned long npages)
-{
-	iopte_t *iopte, *limit, *first;
-	unsigned long cnum, ent, flush_point;
-
-	cnum = 0;
-	while ((1UL << cnum) < npages)
-		cnum++;
-	iopte  = (iommu->page_table +
-		  (cnum << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-
-	if (cnum == 0)
-		limit = (iommu->page_table +
-			 iommu->lowest_consistent_map);
-	else
-		limit = (iopte +
-			 (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-
-	iopte += ((ent = iommu->alloc_info[cnum].next) << cnum);
-	flush_point = iommu->alloc_info[cnum].flush;
-	
-	first = iopte;
-	for (;;) {
-		if (IOPTE_IS_DUMMY(iommu, iopte)) {
-			if ((iopte + (1 << cnum)) >= limit)
-				ent = 0;
-			else
-				ent = ent + 1;
-			iommu->alloc_info[cnum].next = ent;
-			if (ent == flush_point)
-				__iommu_flushall(iommu);
-			break;
+	struct pci_iommu_arena *arena = &iommu->arena;
+	unsigned long n, i, start, end, limit;
+	int pass;
+
+	limit = arena->limit;
+	start = arena->hint;
+	pass = 0;
+
+again:
+	n = find_next_zero_bit(arena->map, limit, start);
+	end = n + npages;
+	if (unlikely(end >= limit)) {
+		if (likely(pass < 1)) {
+			limit = start;
+			start = 0;
+			__iommu_flushall(iommu);
+			pass++;
+			goto again;
+		} else {
+			/* Scanned the whole thing, give up. */
+			return -1;
 		}
-		iopte += (1 << cnum);
-		ent++;
-		if (iopte >= limit) {
-			iopte = (iommu->page_table +
-				 (cnum <<
-				  (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-			ent = 0;
+	}
+
+	for (i = n; i < end; i++) {
+		if (test_bit(i, arena->map)) {
+			start = i + 1;
+			goto again;
 		}
-		if (ent == flush_point)
-			__iommu_flushall(iommu);
-		if (iopte == first)
-			goto bad;
 	}
 
-	/* I've got your streaming cluster right here buddy boy... */
-	return iopte;
+	for (i = n; i < end; i++)
+		__set_bit(i, arena->map);
 
-bad:
-	printk(KERN_EMERG "pci_iommu: alloc_streaming_cluster of npages(%ld) failed!\n",
-	       npages);
-	return NULL;
+	arena->hint = end;
+
+	return n;
 }
 
-static void free_streaming_cluster(struct pci_iommu *iommu, dma_addr_t base,
-				   unsigned long npages, unsigned long ctx)
+static void pci_arena_free(struct pci_iommu_arena *arena, unsigned long base, unsigned long npages)
 {
-	unsigned long cnum, ent;
+	unsigned long i;
 
-	cnum = 0;
-	while ((1UL << cnum) < npages)
-		cnum++;
+	for (i = base; i < (base + npages); i++)
+		__clear_bit(i, arena->map);
+}
 
-	ent = (base << (32 - IO_PAGE_SHIFT + PBM_LOGCLUSTERS - iommu->page_table_sz_bits))
-		>> (32 + PBM_LOGCLUSTERS + cnum - iommu->page_table_sz_bits);
+void pci_iommu_table_init(struct pci_iommu *iommu, int tsbsize, u32 dma_offset, u32 dma_addr_mask)
+{
+	unsigned long i, tsbbase, order, sz, num_tsb_entries;
+
+	num_tsb_entries = tsbsize / sizeof(iopte_t);
+
+	/* Setup initial software IOMMU state. */
+	spin_lock_init(&iommu->lock);
+	iommu->ctx_lowest_free = 1;
+	iommu->page_table_map_base = dma_offset;
+	iommu->dma_addr_mask = dma_addr_mask;
+
+	/* Allocate and initialize the free area map.  */
+	sz = num_tsb_entries / 8;
+	sz = (sz + 7UL) & ~7UL;
+	iommu->arena.map = kmalloc(sz, GFP_KERNEL);
+	if (!iommu->arena.map) {
+		prom_printf("PCI_IOMMU: Error, kmalloc(arena.map) failed.\n");
+		prom_halt();
+	}
+	memset(iommu->arena.map, 0, sz);
+	iommu->arena.limit = num_tsb_entries;
 
-	/* If the global flush might not have caught this entry,
-	 * adjust the flush point such that we will flush before
-	 * ever trying to reuse it.
+	/* Allocate and initialize the dummy page which we
+	 * set inactive IO PTEs to point to.
 	 */
-#define between(X,Y,Z)	(((Z) - (Y)) >= ((X) - (Y)))
-	if (between(ent, iommu->alloc_info[cnum].next, iommu->alloc_info[cnum].flush))
-		iommu->alloc_info[cnum].flush = ent;
-#undef between
+	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
+	if (!iommu->dummy_page) {
+		prom_printf("PCI_IOMMU: Error, gfp(dummy_page) failed.\n");
+		prom_halt();
+	}
+	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
+	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
+
+	/* Now allocate and setup the IOMMU page table itself.  */
+	order = get_order(tsbsize);
+	tsbbase = __get_free_pages(GFP_KERNEL, order);
+	if (!tsbbase) {
+		prom_printf("PCI_IOMMU: Error, gfp(tsb) failed.\n");
+		prom_halt();
+	}
+	iommu->page_table = (iopte_t *)tsbbase;
+
+	for (i = 0; i < num_tsb_entries; i++)
+		iopte_make_dummy(iommu, &iommu->page_table[i]);
 }
 
-/* We allocate consistent mappings from the end of cluster zero. */
-static iopte_t *alloc_consistent_cluster(struct pci_iommu *iommu, unsigned long npages)
+static inline iopte_t *alloc_npages(struct pci_iommu *iommu, unsigned long npages)
 {
-	iopte_t *iopte;
+	long entry;
 
-	iopte = iommu->page_table + (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS));
-	while (iopte > iommu->page_table) {
-		iopte--;
-		if (IOPTE_IS_DUMMY(iommu, iopte)) {
-			unsigned long tmp = npages;
+	entry = pci_arena_alloc(iommu, npages);
+	if (unlikely(entry < 0))
+		return NULL;
 
-			while (--tmp) {
-				iopte--;
-				if (!IOPTE_IS_DUMMY(iommu, iopte))
-					break;
-			}
-			if (tmp == 0) {
-				u32 entry = (iopte - iommu->page_table);
+	return iommu->page_table + entry;
+}
 
-				if (entry < iommu->lowest_consistent_map)
-					iommu->lowest_consistent_map = entry;
-				return iopte;
-			}
-		}
-	}
-	return NULL;
+static inline void free_npages(struct pci_iommu *iommu, dma_addr_t base, unsigned long npages)
+{
+	pci_arena_free(&iommu->arena, base >> IO_PAGE_SHIFT, npages);
 }
 
 static int iommu_alloc_ctx(struct pci_iommu *iommu)
@@ -233,7 +224,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
 	iopte_t *iopte;
-	unsigned long flags, order, first_page, ctx;
+	unsigned long flags, order, first_page;
 	void *ret;
 	int npages;
 
@@ -251,9 +242,10 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 	iommu = pcp->pbm->iommu;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	iopte = alloc_consistent_cluster(iommu, size >> IO_PAGE_SHIFT);
-	if (iopte == NULL) {
-		spin_unlock_irqrestore(&iommu->lock, flags);
+	iopte = alloc_npages(iommu, size >> IO_PAGE_SHIFT);
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
+	if (unlikely(iopte == NULL)) {
 		free_pages(first_page, order);
 		return NULL;
 	}
@@ -262,31 +254,15 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_ad
 		      ((iopte - iommu->page_table) << IO_PAGE_SHIFT));
 	ret = (void *) first_page;
 	npages = size >> IO_PAGE_SHIFT;
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = iommu_alloc_ctx(iommu);
 	first_page = __pa(first_page);
 	while (npages--) {
-		iopte_val(*iopte) = (IOPTE_CONSISTENT(ctx) |
+		iopte_val(*iopte) = (IOPTE_CONSISTENT(0UL) |
 				     IOPTE_WRITE |
 				     (first_page & IOPTE_PAGE));
 		iopte++;
 		first_page += IO_PAGE_SIZE;
 	}
 
-	{
-		int i;
-		u32 daddr = *dma_addrp;
-
-		npages = size >> IO_PAGE_SHIFT;
-		for (i = 0; i < npages; i++) {
-			pci_iommu_write(iommu->iommu_flush, daddr);
-			daddr += IO_PAGE_SIZE;
-		}
-	}
-
-	spin_unlock_irqrestore(&iommu->lock, flags);
-
 	return ret;
 }
 
@@ -296,7 +272,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
 	iopte_t *iopte;
-	unsigned long flags, order, npages, i, ctx;
+	unsigned long flags, order, npages;
 
 	npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT;
 	pcp = pdev->sysdata;
@@ -306,46 +282,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, dma_addr_
 
 	spin_lock_irqsave(&iommu->lock, flags);
 
-	if ((iopte - iommu->page_table) ==
-	    iommu->lowest_consistent_map) {
-		iopte_t *walk = iopte + npages;
-		iopte_t *limit;
-
-		limit = (iommu->page_table +
-			 (1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS)));
-		while (walk < limit) {
-			if (!IOPTE_IS_DUMMY(iommu, walk))
-				break;
-			walk++;
-		}
-		iommu->lowest_consistent_map =
-			(walk - iommu->page_table);
-	}
-
-	/* Data for consistent mappings cannot enter the streaming
-	 * buffers, so we only need to update the TSB.  We flush
-	 * the IOMMU here as well to prevent conflicts with the
-	 * streaming mapping deferred tlb flush scheme.
-	 */
-
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = (iopte_val(*iopte) & IOPTE_CONTEXT) >> 47UL;
-
-	for (i = 0; i < npages; i++, iopte++)
-		iopte_make_dummy(iommu, iopte);
-
-	if (iommu->iommu_ctxflush) {
-		pci_iommu_write(iommu->iommu_ctxflush, ctx);
-	} else {
-		for (i = 0; i < npages; i++) {
-			u32 daddr = dvma + (i << IO_PAGE_SHIFT);
-
-			pci_iommu_write(iommu->iommu_flush, daddr);
-		}
-	}
-
-	iommu_free_ctx(iommu, ctx);
+	free_npages(iommu, dvma, npages);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 
@@ -372,25 +309,27 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct
 	iommu = pcp->pbm->iommu;
 	strbuf = &pcp->pbm->stc;
 
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE))
+		goto bad_no_ctx;
 
 	oaddr = (unsigned long)ptr;
 	npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK);
 	npages >>= IO_PAGE_SHIFT;
 
 	spin_lock_irqsave(&iommu->lock, flags);
+	base = alloc_npages(iommu, npages);
+	ctx = 0;
+	if (iommu->iommu_ctxflush)
+		ctx = iommu_alloc_ctx(iommu);
+	spin_unlock_irqrestore(&iommu->lock, flags);
 
-	base = alloc_streaming_cluster(iommu, npages);
-	if (base == NULL)
+	if (unlikely(!base))
 		goto bad;
+
 	bus_addr = (iommu->page_table_map_base +
 		    ((base - iommu->page_table) << IO_PAGE_SHIFT));
 	ret = bus_addr | (oaddr & ~IO_PAGE_MASK);
 	base_paddr = __pa(oaddr & IO_PAGE_MASK);
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = iommu_alloc_ctx(iommu);
 	if (strbuf->strbuf_enabled)
 		iopte_protection = IOPTE_STREAMING(ctx);
 	else
@@ -401,12 +340,13 @@ dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr, size_t sz, int direct
 	for (i = 0; i < npages; i++, base++, base_paddr += IO_PAGE_SIZE)
 		iopte_val(*base) = iopte_protection | base_paddr;
 
-	spin_unlock_irqrestore(&iommu->lock, flags);
-
 	return ret;
 
 bad:
-	spin_unlock_irqrestore(&iommu->lock, flags);
+	iommu_free_ctx(iommu, ctx);
+bad_no_ctx:
+	if (printk_ratelimit())
+		WARN_ON(1);
 	return PCI_DMA_ERROR_CODE;
 }
 
@@ -481,10 +421,13 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 	struct pci_iommu *iommu;
 	struct pci_strbuf *strbuf;
 	iopte_t *base;
-	unsigned long flags, npages, ctx;
+	unsigned long flags, npages, ctx, i;
 
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE)) {
+		if (printk_ratelimit())
+			WARN_ON(1);
+		return;
+	}
 
 	pcp = pdev->sysdata;
 	iommu = pcp->pbm->iommu;
@@ -510,13 +453,14 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
 	if (strbuf->strbuf_enabled)
-		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx,
+				 npages, direction);
 
-	/* Step 2: Clear out first TSB entry. */
-	iopte_make_dummy(iommu, base);
+	/* Step 2: Clear out TSB entries. */
+	for (i = 0; i < npages; i++)
+		iopte_make_dummy(iommu, base + i);
 
-	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
-			       npages, ctx);
+	free_npages(iommu, bus_addr - iommu->page_table_map_base, npages);
 
 	iommu_free_ctx(iommu, ctx);
 
@@ -621,6 +565,8 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 			pci_map_single(pdev,
 				       (page_address(sglist->page) + sglist->offset),
 				       sglist->length, direction);
+		if (unlikely(sglist->dma_address == PCI_DMA_ERROR_CODE))
+			return 0;
 		sglist->dma_length = sglist->length;
 		return 1;
 	}
@@ -629,21 +575,29 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 	iommu = pcp->pbm->iommu;
 	strbuf = &pcp->pbm->stc;
 	
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE))
+		goto bad_no_ctx;
 
 	/* Step 1: Prepare scatter list. */
 
 	npages = prepare_sg(sglist, nelems);
 
-	/* Step 2: Allocate a cluster. */
+	/* Step 2: Allocate a cluster and context, if necessary. */
 
 	spin_lock_irqsave(&iommu->lock, flags);
 
-	base = alloc_streaming_cluster(iommu, npages);
+	base = alloc_npages(iommu, npages);
+	ctx = 0;
+	if (iommu->iommu_ctxflush)
+		ctx = iommu_alloc_ctx(iommu);
+
+	spin_unlock_irqrestore(&iommu->lock, flags);
+
 	if (base == NULL)
 		goto bad;
-	dma_base = iommu->page_table_map_base + ((base - iommu->page_table) << IO_PAGE_SHIFT);
+
+	dma_base = iommu->page_table_map_base +
+		((base - iommu->page_table) << IO_PAGE_SHIFT);
 
 	/* Step 3: Normalize DMA addresses. */
 	used = nelems;
@@ -656,30 +610,28 @@ int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems, int
 	}
 	used = nelems - used;
 
-	/* Step 4: Choose a context if necessary. */
-	ctx = 0;
-	if (iommu->iommu_ctxflush)
-		ctx = iommu_alloc_ctx(iommu);
-
-	/* Step 5: Create the mappings. */
+	/* Step 4: Create the mappings. */
 	if (strbuf->strbuf_enabled)
 		iopte_protection = IOPTE_STREAMING(ctx);
 	else
 		iopte_protection = IOPTE_CONSISTENT(ctx);
 	if (direction != PCI_DMA_TODEVICE)
 		iopte_protection |= IOPTE_WRITE;
-	fill_sg (base, sglist, used, nelems, iopte_protection);
+
+	fill_sg(base, sglist, used, nelems, iopte_protection);
+
 #ifdef VERIFY_SG
 	verify_sglist(sglist, nelems, base, npages);
 #endif
 
-	spin_unlock_irqrestore(&iommu->lock, flags);
-
 	return used;
 
 bad:
-	spin_unlock_irqrestore(&iommu->lock, flags);
-	return PCI_DMA_ERROR_CODE;
+	iommu_free_ctx(iommu, ctx);
+bad_no_ctx:
+	if (printk_ratelimit())
+		WARN_ON(1);
+	return 0;
 }
 
 /* Unmap a set of streaming mode DMA translations. */
@@ -692,8 +644,10 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 	unsigned long flags, ctx, i, npages;
 	u32 bus_addr;
 
-	if (direction == PCI_DMA_NONE)
-		BUG();
+	if (unlikely(direction == PCI_DMA_NONE)) {
+		if (printk_ratelimit())
+			WARN_ON(1);
+	}
 
 	pcp = pdev->sysdata;
 	iommu = pcp->pbm->iommu;
@@ -705,7 +659,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 		if (sglist[i].dma_length == 0)
 			break;
 	i--;
-	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT;
+	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) -
+		  bus_addr) >> IO_PAGE_SHIFT;
 
 	base = iommu->page_table +
 		((bus_addr - iommu->page_table_map_base) >> IO_PAGE_SHIFT);
@@ -726,11 +681,11 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 	if (strbuf->strbuf_enabled)
 		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages, direction);
 
-	/* Step 2: Clear out first TSB entry. */
-	iopte_make_dummy(iommu, base);
+	/* Step 2: Clear out the TSB entries. */
+	for (i = 0; i < npages; i++)
+		iopte_make_dummy(iommu, base + i);
 
-	free_streaming_cluster(iommu, bus_addr - iommu->page_table_map_base,
-			       npages, ctx);
+	free_npages(iommu, bus_addr - iommu->page_table_map_base, npages);
 
 	iommu_free_ctx(iommu, ctx);
 

arch/sparc64/kernel/pci_psycho.c

@@ -1207,13 +1207,9 @@ static void psycho_scan_bus(struct pci_controller_info *p)
 static void psycho_iommu_init(struct pci_controller_info *p)
 {
 	struct pci_iommu *iommu = p->pbm_A.iommu;
-	unsigned long tsbbase, i;
+	unsigned long i;
 	u64 control;
 
-	/* Setup initial software IOMMU state. */
-	spin_lock_init(&iommu->lock);
-	iommu->ctx_lowest_free = 1;
-
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL;
 	iommu->iommu_tsbbase  = p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE;
@@ -1240,40 +1236,10 @@ static void psycho_iommu_init(struct pci_controller_info *p)
 	/* Leave diag mode enabled for full-flushing done
 	 * in pci_iommu.c
 	 */
+	pci_iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff);
 
-	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
-	if (!iommu->dummy_page) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
-		prom_halt();
-	}
-	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
-	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
-
-	/* Using assumed page size 8K with 128K entries we need 1MB iommu page
-	 * table (128K ioptes * 8 bytes per iopte).  This is
-	 * page order 7 on UltraSparc.
-	 */
-	tsbbase = __get_free_pages(GFP_KERNEL, get_order(IO_TSB_SIZE));
-	if (!tsbbase) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(tsb) failed.\n");
-		prom_halt();
-	}
-	iommu->page_table = (iopte_t *)tsbbase;
-	iommu->page_table_sz_bits = 17;
-	iommu->page_table_map_base = 0xc0000000;
-	iommu->dma_addr_mask = 0xffffffff;
-	pci_iommu_table_init(iommu, IO_TSB_SIZE);
-
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map =
-		1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
-
-	for (i = 0; i < PBM_NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
-
-	psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE, __pa(tsbbase));
+	psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_TSBBASE,
+		     __pa(iommu->page_table));
 
 	control = psycho_read(p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL);
 	control &= ~(PSYCHO_IOMMU_CTRL_TSBSZ | PSYCHO_IOMMU_CTRL_TBWSZ);
@@ -1281,7 +1247,7 @@ static void psycho_iommu_init(struct pci_controller_info *p)
 	psycho_write(p->pbm_A.controller_regs + PSYCHO_IOMMU_CONTROL, control);
 
 	/* If necessary, hook us up for starfire IRQ translations. */
-	if(this_is_starfire)
+	if (this_is_starfire)
 		p->starfire_cookie = starfire_hookup(p->pbm_A.portid);
 	else
 		p->starfire_cookie = NULL;

arch/sparc64/kernel/pci_sabre.c

@@ -1267,13 +1267,9 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 			     u32 dma_mask)
 {
 	struct pci_iommu *iommu = p->pbm_A.iommu;
-	unsigned long tsbbase, i, order;
+	unsigned long i;
 	u64 control;
 
-	/* Setup initial software IOMMU state. */
-	spin_lock_init(&iommu->lock);
-	iommu->ctx_lowest_free = 1;
-
 	/* Register addresses. */
 	iommu->iommu_control  = p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL;
 	iommu->iommu_tsbbase  = p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE;
@@ -1295,26 +1291,10 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 	/* Leave diag mode enabled for full-flushing done
 	 * in pci_iommu.c
 	 */
+	pci_iommu_table_init(iommu, tsbsize * 1024 * 8, dvma_offset, dma_mask);
 
-	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
-	if (!iommu->dummy_page) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
-		prom_halt();
-	}
-	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
-	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
-
-	tsbbase = __get_free_pages(GFP_KERNEL, order = get_order(tsbsize * 1024 * 8));
-	if (!tsbbase) {
-		prom_printf("SABRE_IOMMU: Error, gfp(tsb) failed.\n");
-		prom_halt();
-	}
-	iommu->page_table = (iopte_t *)tsbbase;
-	iommu->page_table_map_base = dvma_offset;
-	iommu->dma_addr_mask = dma_mask;
-	pci_iommu_table_init(iommu, PAGE_SIZE << order);
-
-	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE, __pa(tsbbase));
+	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_TSBBASE,
+		    __pa(iommu->page_table));
 
 	control = sabre_read(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL);
 	control &= ~(SABRE_IOMMUCTRL_TSBSZ | SABRE_IOMMUCTRL_TBWSZ);
@@ -1322,11 +1302,9 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 	switch(tsbsize) {
 	case 64:
 		control |= SABRE_IOMMU_TSBSZ_64K;
-		iommu->page_table_sz_bits = 16;
 		break;
 	case 128:
 		control |= SABRE_IOMMU_TSBSZ_128K;
-		iommu->page_table_sz_bits = 17;
 		break;
 	default:
 		prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize);
@@ -1334,15 +1312,6 @@ static void sabre_iommu_init(struct pci_controller_info *p,
 		break;
 	}
 	sabre_write(p->pbm_A.controller_regs + SABRE_IOMMU_CONTROL, control);
-
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map =
-		1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
-
-	for (i = 0; i < PBM_NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
 }
 
 static void pbm_register_toplevel_resources(struct pci_controller_info *p,

arch/sparc64/kernel/pci_schizo.c

@@ -1765,7 +1765,7 @@ static void schizo_pbm_strbuf_init(struct pci_pbm_info *pbm)
 static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 {
 	struct pci_iommu *iommu = pbm->iommu;
-	unsigned long tsbbase, i, tagbase, database, order;
+	unsigned long i, tagbase, database;
 	u32 vdma[2], dma_mask;
 	u64 control;
 	int err, tsbsize;
@@ -1800,10 +1800,6 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 			prom_halt();
 	};
 
-	/* Setup initial software IOMMU state. */
-	spin_lock_init(&iommu->lock);
-	iommu->ctx_lowest_free = 1;
-
 	/* Register addresses, SCHIZO has iommu ctx flushing. */
 	iommu->iommu_control  = pbm->pbm_regs + SCHIZO_IOMMU_CONTROL;
 	iommu->iommu_tsbbase  = pbm->pbm_regs + SCHIZO_IOMMU_TSBBASE;
@@ -1832,56 +1828,9 @@ static void schizo_pbm_iommu_init(struct pci_pbm_info *pbm)
 	/* Leave diag mode enabled for full-flushing done
 	 * in pci_iommu.c
 	 */
+	pci_iommu_table_init(iommu, tsbsize * 8 * 1024, vdma[0], dma_mask);
 
-	iommu->dummy_page = __get_free_pages(GFP_KERNEL, 0);
-	if (!iommu->dummy_page) {
-		prom_printf("PSYCHO_IOMMU: Error, gfp(dummy_page) failed.\n");
-		prom_halt();
-	}
-	memset((void *)iommu->dummy_page, 0, PAGE_SIZE);
-	iommu->dummy_page_pa = (unsigned long) __pa(iommu->dummy_page);
-
-	/* Using assumed page size 8K with 128K entries we need 1MB iommu page
-	 * table (128K ioptes * 8 bytes per iopte).  This is
-	 * page order 7 on UltraSparc.
-	 */
-	order = get_order(tsbsize * 8 * 1024);
-	tsbbase = __get_free_pages(GFP_KERNEL, order);
-	if (!tsbbase) {
-		prom_printf("%s: Error, gfp(tsb) failed.\n", pbm->name);
-		prom_halt();
-	}
-
-	iommu->page_table = (iopte_t *)tsbbase;
-	iommu->page_table_map_base = vdma[0];
-	iommu->dma_addr_mask = dma_mask;
-	pci_iommu_table_init(iommu, PAGE_SIZE << order);
-
-	switch (tsbsize) {
-	case 64:
-		iommu->page_table_sz_bits = 16;
-		break;
-
-	case 128:
-		iommu->page_table_sz_bits = 17;
-		break;
-
-	default:
-		prom_printf("iommu_init: Illegal TSB size %d\n", tsbsize);
-		prom_halt();
-		break;
-	};
-
-	/* We start with no consistent mappings. */
-	iommu->lowest_consistent_map =
-		1 << (iommu->page_table_sz_bits - PBM_LOGCLUSTERS);
-
-	for (i = 0; i < PBM_NCLUSTERS; i++) {
-		iommu->alloc_info[i].flush = 0;
-		iommu->alloc_info[i].next = 0;
-	}
-
-	schizo_write(iommu->iommu_tsbbase, __pa(tsbbase));
+	schizo_write(iommu->iommu_tsbbase, __pa(iommu->page_table));
 
 	control = schizo_read(iommu->iommu_control);
 	control &= ~(SCHIZO_IOMMU_CTRL_TSBSZ | SCHIZO_IOMMU_CTRL_TBWSZ);

arch/sparc64/kernel/smp.c

@@ -1001,13 +1001,6 @@ void smp_penguin_jailcell(int irq, struct pt_regs *regs)
 	preempt_enable();
 }
 
-extern unsigned long xcall_promstop;
-
-void smp_promstop_others(void)
-{
-	smp_cross_call(&xcall_promstop, 0, 0, 0);
-}
-
 #define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
 #define prof_counter(__cpu)		cpu_data(__cpu).counter
 

arch/sparc64/mm/init.c

@@ -105,7 +105,7 @@ static void __init read_obp_memory(const char *property,
 		regs[i].phys_addr = base;
 		regs[i].reg_size = size;
 	}
-	sort(regs, ents, sizeof(struct  linux_prom64_registers),
+	sort(regs, ents, sizeof(struct linux_prom64_registers),
 	     cmp_p64, NULL);
 }
 
@@ -367,8 +367,11 @@ struct linux_prom_translation {
 	unsigned long size;
 	unsigned long data;
 };
-static struct linux_prom_translation prom_trans[512] __initdata;
-static unsigned int prom_trans_ents __initdata;
+
+/* Exported for kernel TLB miss handling in ktlb.S */
+struct linux_prom_translation prom_trans[512] __read_mostly;
+unsigned int prom_trans_ents __read_mostly;
+unsigned int swapper_pgd_zero __read_mostly;
 
 extern unsigned long prom_boot_page;
 extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle);
@@ -378,122 +381,57 @@ extern void register_prom_callbacks(void);
 /* Exported for SMP bootup purposes. */
 unsigned long kern_locked_tte_data;
 
-/* Exported for kernel TLB miss handling in ktlb.S */
-unsigned long prom_pmd_phys __read_mostly;
-unsigned int swapper_pgd_zero __read_mostly;
-
-static pmd_t *prompmd __read_mostly;
-
-#define BASE_PAGE_SIZE 8192
-
 /*
  * Translate PROM's mapping we capture at boot time into physical address.
  * The second parameter is only set from prom_callback() invocations.
  */
 unsigned long prom_virt_to_phys(unsigned long promva, int *error)
 {
-	pmd_t *pmdp = prompmd + ((promva >> 23) & 0x7ff);
-	pte_t *ptep;
-	unsigned long base;
-
-	if (pmd_none(*pmdp)) {
-		if (error)
-			*error = 1;
-		return 0;
-	}
-	ptep = (pte_t *)__pmd_page(*pmdp) + ((promva >> 13) & 0x3ff);
-	if (!pte_present(*ptep)) {
-		if (error)
-			*error = 1;
-		return 0;
-	}
-	if (error) {
-		*error = 0;
-		return pte_val(*ptep);
-	}
-	base = pte_val(*ptep) & _PAGE_PADDR;
-
-	return base + (promva & (BASE_PAGE_SIZE - 1));
-}
+	int i;
 
-/* The obp translations are saved based on 8k pagesize, since obp can
- * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS ->
- * HI_OBP_ADDRESS range are handled in entry.S and do not use the vpte
- * scheme (also, see rant in inherit_locked_prom_mappings()).
- */
-static void __init build_obp_range(unsigned long start, unsigned long end, unsigned long data)
-{
-	unsigned long vaddr;
+	for (i = 0; i < prom_trans_ents; i++) {
+		struct linux_prom_translation *p = &prom_trans[i];
 
-	for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) {
-		unsigned long val;
-		pmd_t *pmd;
-		pte_t *pte;
+		if (promva >= p->virt &&
+		    promva < (p->virt + p->size)) {
+			unsigned long base = p->data & _PAGE_PADDR;
 
-		pmd = prompmd + ((vaddr >> 23) & 0x7ff);
-		if (pmd_none(*pmd)) {
-			pte = __alloc_bootmem(BASE_PAGE_SIZE, BASE_PAGE_SIZE,
-					      PAGE_SIZE);
-			if (!pte)
-				prom_halt();
-			memset(pte, 0, BASE_PAGE_SIZE);
-			pmd_set(pmd, pte);
+			if (error)
+				*error = 0;
+			return base + (promva & (8192 - 1));
 		}
-		pte = (pte_t *) __pmd_page(*pmd) + ((vaddr >> 13) & 0x3ff);
-
-		val = data;
-
-		/* Clear diag TTE bits. */
-		if (tlb_type == spitfire)
-			val &= ~0x0003fe0000000000UL;
-
-		set_pte_at(&init_mm, vaddr, pte,
-			   __pte(val | _PAGE_MODIFIED));
-
-		data += BASE_PAGE_SIZE;
 	}
+	if (error)
+		*error = 1;
+	return 0UL;
 }
 
+/* The obp translations are saved based on 8k pagesize, since obp can
+ * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS ->
+ * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte
+ * scheme (also, see rant in inherit_locked_prom_mappings()).
+ */
 static inline int in_obp_range(unsigned long vaddr)
 {
 	return (vaddr >= LOW_OBP_ADDRESS &&
 		vaddr < HI_OBP_ADDRESS);
 }
 
-#define OBP_PMD_SIZE 2048
-static void __init build_obp_pgtable(void)
+static int cmp_ptrans(const void *a, const void *b)
 {
-	unsigned long i;
-
-	prompmd = __alloc_bootmem(OBP_PMD_SIZE, OBP_PMD_SIZE, PAGE_SIZE);
-	if (!prompmd)
-		prom_halt();
-
-	memset(prompmd, 0, OBP_PMD_SIZE);
-
-	prom_pmd_phys = __pa(prompmd);
-
-	for (i = 0; i < prom_trans_ents; i++) {
-		unsigned long start, end;
-
-		if (!in_obp_range(prom_trans[i].virt))
-			continue;
+	const struct linux_prom_translation *x = a, *y = b;
 
-		start = prom_trans[i].virt;
-		end = start + prom_trans[i].size;
-		if (end > HI_OBP_ADDRESS)
-			end = HI_OBP_ADDRESS;
-
-		build_obp_range(start, end, prom_trans[i].data);
-	}
+	if (x->virt > y->virt)
+		return 1;
+	if (x->virt < y->virt)
+		return -1;
+	return 0;
 }
 
-/* Read OBP translations property into 'prom_trans[]'.
- * Return the number of entries.
- */
+/* Read OBP translations property into 'prom_trans[]'.  */
 static void __init read_obp_translations(void)
 {
-	int n, node;
+	int n, node, ents, first, last, i;
 
 	node = prom_finddevice("/virtual-memory");
 	n = prom_getproplen(node, "translations");
@@ -515,7 +453,41 @@ static void __init read_obp_translations(void)
 
 	n = n / sizeof(struct linux_prom_translation);
 
-	prom_trans_ents = n;
+	ents = n;
+
+	sort(prom_trans, ents, sizeof(struct linux_prom_translation),
+	     cmp_ptrans, NULL);
+
+	/* Now kick out all the non-OBP entries.  */
+	for (i = 0; i < ents; i++) {
+		if (in_obp_range(prom_trans[i].virt))
+			break;
+	}
+	first = i;
+	for (; i < ents; i++) {
+		if (!in_obp_range(prom_trans[i].virt))
+			break;
+	}
+	last = i;
+
+	for (i = 0; i < (last - first); i++) {
+		struct linux_prom_translation *src = &prom_trans[i + first];
+		struct linux_prom_translation *dest = &prom_trans[i];
+
+		*dest = *src;
+	}
+	for (; i < ents; i++) {
+		struct linux_prom_translation *dest = &prom_trans[i];
+		dest->virt = dest->size = dest->data = 0x0UL;
+	}
+
+	prom_trans_ents = last - first;
+
+	if (tlb_type == spitfire) {
+		/* Clear diag TTE bits. */
+		for (i = 0; i < prom_trans_ents; i++)
+			prom_trans[i].data &= ~0x0003fe0000000000UL;
+	}
 }
 
 static void __init remap_kernel(void)
@@ -553,21 +525,18 @@ static void __init remap_kernel(void)
 }
 
 
-static void __init inherit_prom_mappings_pre(void)
+static void __init inherit_prom_mappings(void)
 {
 	read_obp_translations();
 
 	/* Now fixup OBP's idea about where we really are mapped. */
 	prom_printf("Remapping the kernel... ");
 	remap_kernel();
-
 	prom_printf("done.\n");
-}
 
-static void __init inherit_prom_mappings_post(void)
-{
-	build_obp_pgtable();
+	prom_printf("Registering callbacks... ");
 	register_prom_callbacks();
+	prom_printf("done.\n");
 }
 
 /* The OBP specifications for sun4u mark 0xfffffffc00000000 and
@@ -1519,7 +1488,7 @@ void __init paging_init(void)
 	
 	swapper_pgd_zero = pgd_val(swapper_pg_dir[0]);
 	
-	inherit_prom_mappings_pre();
+	inherit_prom_mappings();
 	
 	/* Ok, we can use our TLB miss and window trap handlers safely.
 	 * We need to do a quick peek here to see if we are on StarFire
@@ -1530,23 +1499,15 @@ void __init paging_init(void)
 		extern void setup_tba(int);
 		setup_tba(this_is_starfire);
 	}
-	__flush_tlb_all();
 
-	/* Everything from this point forward, until we are done with
-	 * inherit_prom_mappings_post(), must complete successfully
-	 * without calling into the firmware.  The firwmare page tables
-	 * have not been built, but we are running on the Linux kernel's
-	 * trap table.
-	 */
+	inherit_locked_prom_mappings(1);
+
+	__flush_tlb_all();
 
 	/* Setup bootmem... */
 	pages_avail = 0;
 	last_valid_pfn = end_pfn = bootmem_init(&pages_avail);
 
-	inherit_prom_mappings_post();
-
-	inherit_locked_prom_mappings(1);
-
 #ifdef CONFIG_DEBUG_PAGEALLOC
 	kernel_physical_mapping_init();
 #endif

arch/sparc64/mm/ultra.S

@@ -453,22 +453,6 @@ xcall_flush_dcache_page_spitfire: /* %g1 == physical page address
 	nop
 	nop
 
-	.globl		xcall_promstop
-xcall_promstop:
-	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	rdpr		%pil, %g2
-	wrpr		%g0, 15, %pil
-	sethi		%hi(109f), %g7
-	b,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-	flushw
-	call		prom_stopself
-	 nop
-	/* We should not return, just spin if we do... */
-1:	b,a,pt		%xcc, 1b
-	nop
-
 	.data
 
 errata32_hwbug:

arch/sparc64/prom/misc.c

@@ -68,19 +68,11 @@ void prom_cmdline(void)
 	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_SMP
-extern void smp_promstop_others(void);
-#endif
-
 /* Drop into the prom, but completely terminate the program.
  * No chance of continuing.
  */
 void prom_halt(void)
 {
-#ifdef CONFIG_SMP
-	smp_promstop_others();
-	udelay(8000);
-#endif
 again:
 	p1275_cmd("exit", P1275_INOUT(0, 0));
 	goto again; /* PROM is out to get me -DaveM */
@@ -88,10 +80,6 @@ again:
 
 void prom_halt_power_off(void)
 {
-#ifdef CONFIG_SMP
-	smp_promstop_others();
-	udelay(8000);
-#endif
 	p1275_cmd("SUNW,power-off", P1275_INOUT(0, 0));
 
 	/* if nothing else helps, we just halt */

arch/um/drivers/Makefile

@@ -13,7 +13,7 @@ mcast-objs := mcast_kern.o mcast_user.o
 net-objs := net_kern.o net_user.o
 mconsole-objs := mconsole_kern.o mconsole_user.o
 hostaudio-objs := hostaudio_kern.o
-ubd-objs := ubd_kern.o
+ubd-objs := ubd_kern.o ubd_user.o
 port-objs := port_kern.o port_user.o
 harddog-objs := harddog_kern.o harddog_user.o
 

arch/um/drivers/ubd_kern.c

@@ -35,7 +35,6 @@
 #include "linux/blkpg.h"
 #include "linux/genhd.h"
 #include "linux/spinlock.h"
-#include "asm/atomic.h"
 #include "asm/segment.h"
 #include "asm/uaccess.h"
 #include "asm/irq.h"
@@ -54,21 +53,20 @@
 #include "mem.h"
 #include "mem_kern.h"
 #include "cow.h"
-#include "aio.h"
 
 enum ubd_req { UBD_READ, UBD_WRITE };
 
 struct io_thread_req {
-	enum aio_type op;
+	enum ubd_req op;
 	int fds[2];
 	unsigned long offsets[2];
 	unsigned long long offset;
 	unsigned long length;
 	char *buffer;
 	int sectorsize;
-	int bitmap_offset;
-	long bitmap_start;
-	long bitmap_end;
+	unsigned long sector_mask;
+	unsigned long long cow_offset;
+	unsigned long bitmap_words[2];
 	int error;
 };
 
@@ -82,31 +80,28 @@ extern int create_cow_file(char *cow_file, char *backing_file,
 			   unsigned long *bitmap_len_out,
 			   int *data_offset_out);
 extern int read_cow_bitmap(int fd, void *buf, int offset, int len);
-extern void do_io(struct io_thread_req *req, struct request *r,
-		  unsigned long *bitmap);
+extern void do_io(struct io_thread_req *req);
 
-static inline int ubd_test_bit(__u64 bit, void *data)
+static inline int ubd_test_bit(__u64 bit, unsigned char *data)
 {
-	unsigned char *buffer = data;
 	__u64 n;
 	int bits, off;
 
-	bits = sizeof(buffer[0]) * 8;
+	bits = sizeof(data[0]) * 8;
 	n = bit / bits;
 	off = bit % bits;
-	return((buffer[n] & (1 << off)) != 0);
+	return((data[n] & (1 << off)) != 0);
 }
 
-static inline void ubd_set_bit(__u64 bit, void *data)
+static inline void ubd_set_bit(__u64 bit, unsigned char *data)
 {
-	unsigned char *buffer = data;
 	__u64 n;
 	int bits, off;
 
-	bits = sizeof(buffer[0]) * 8;
+	bits = sizeof(data[0]) * 8;
 	n = bit / bits;
 	off = bit % bits;
-	buffer[n] |= (1 << off);
+	data[n] |= (1 << off);
 }
 /*End stuff from ubd_user.h*/
 
@@ -115,6 +110,8 @@ static inline void ubd_set_bit(__u64 bit, void *data)
 static DEFINE_SPINLOCK(ubd_io_lock);
 static DEFINE_SPINLOCK(ubd_lock);
 
+static void (*do_ubd)(void);
+
 static int ubd_open(struct inode * inode, struct file * filp);
 static int ubd_release(struct inode * inode, struct file * file);
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -161,8 +158,6 @@ struct cow {
         int data_offset;
 };
 
-#define MAX_SG 64
-
 struct ubd {
 	char *file;
 	int count;
@@ -173,7 +168,6 @@ struct ubd {
 	int no_cow;
 	struct cow cow;
 	struct platform_device pdev;
-        struct scatterlist sg[MAX_SG];
 };
 
 #define DEFAULT_COW { \
@@ -466,114 +460,81 @@ __uml_help(fakehd,
 );
 
 static void do_ubd_request(request_queue_t * q);
-static int in_ubd;
+
+/* Only changed by ubd_init, which is an initcall. */
+int thread_fd = -1;
 
 /* Changed by ubd_handler, which is serialized because interrupts only
  * happen on CPU 0.
  */
 int intr_count = 0;
 
-static void ubd_end_request(struct request *req, int bytes, int uptodate)
+/* call ubd_finish if you need to serialize */
+static void __ubd_finish(struct request *req, int error)
 {
-	if (!end_that_request_first(req, uptodate, bytes >> 9)) {
-		add_disk_randomness(req->rq_disk);
-		end_that_request_last(req);
+	int nsect;
+
+	if(error){
+		end_request(req, 0);
+		return;
 	}
+	nsect = req->current_nr_sectors;
+	req->sector += nsect;
+	req->buffer += nsect << 9;
+	req->errors = 0;
+	req->nr_sectors -= nsect;
+	req->current_nr_sectors = 0;
+	end_request(req, 1);
 }
 
-/* call ubd_finish if you need to serialize */
-static void __ubd_finish(struct request *req, int bytes)
+static inline void ubd_finish(struct request *req, int error)
 {
-	if(bytes < 0){
-		ubd_end_request(req, 0, 0);
-  		return;
-  	}
-
-	ubd_end_request(req, bytes, 1);
+ 	spin_lock(&ubd_io_lock);
+	__ubd_finish(req, error);
+	spin_unlock(&ubd_io_lock);
 }
 
-static inline void ubd_finish(struct request *req, int bytes)
+/* Called without ubd_io_lock held */
+static void ubd_handler(void)
 {
-   	spin_lock(&ubd_io_lock);
-	__ubd_finish(req, bytes);
-  	spin_unlock(&ubd_io_lock);
+	struct io_thread_req req;
+	struct request *rq = elv_next_request(ubd_queue);
+	int n;
+
+	do_ubd = NULL;
+	intr_count++;
+	n = os_read_file(thread_fd, &req, sizeof(req));
+	if(n != sizeof(req)){
+		printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, "
+		       "err = %d\n", os_getpid(), -n);
+		spin_lock(&ubd_io_lock);
+		end_request(rq, 0);
+		spin_unlock(&ubd_io_lock);
+		return;
+	}
+        
+	ubd_finish(rq, req.error);
+	reactivate_fd(thread_fd, UBD_IRQ);	
+	do_ubd_request(ubd_queue);
 }
 
-struct bitmap_io {
-        atomic_t count;
-        struct aio_context aio;
-};
-
-struct ubd_aio {
-        struct aio_context aio;
-        struct request *req;
-        int len;
-        struct bitmap_io *bitmap;
-        void *bitmap_buf;
-};
-
-static int ubd_reply_fd = -1;
-
 static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused)
 {
-	struct aio_thread_reply reply;
-	struct ubd_aio *aio;
-	struct request *req;
-	int err, n, fd = (int) (long) dev;
-
-	while(1){
-		err = os_read_file(fd, &reply, sizeof(reply));
-		if(err == -EAGAIN)
-			break;
-		if(err < 0){
-			printk("ubd_aio_handler - read returned err %d\n",
-			       -err);
-			break;
-		}
-
-                aio = container_of(reply.data, struct ubd_aio, aio);
-                n = reply.err;
-
-		if(n == 0){
-			req = aio->req;
-			req->nr_sectors -= aio->len >> 9;
-
-			if((aio->bitmap != NULL) &&
-			   (atomic_dec_and_test(&aio->bitmap->count))){
-                                aio->aio = aio->bitmap->aio;
-                                aio->len = 0;
-                                kfree(aio->bitmap);
-                                aio->bitmap = NULL;
-                                submit_aio(&aio->aio);
-			}
-			else {
-				if((req->nr_sectors == 0) &&
-                                   (aio->bitmap == NULL)){
-					int len = req->hard_nr_sectors << 9;
-					ubd_finish(req, len);
-				}
-
-                                if(aio->bitmap_buf != NULL)
-                                        kfree(aio->bitmap_buf);
-				kfree(aio);
-			}
-		}
-                else if(n < 0){
-                        ubd_finish(aio->req, n);
-                        if(aio->bitmap != NULL)
-                                kfree(aio->bitmap);
-                        if(aio->bitmap_buf != NULL)
-                                kfree(aio->bitmap_buf);
-                        kfree(aio);
-                }
-	}
-	reactivate_fd(fd, UBD_IRQ);
+	ubd_handler();
+	return(IRQ_HANDLED);
+}
 
-        do_ubd_request(ubd_queue);
+/* Only changed by ubd_init, which is an initcall. */
+static int io_pid = -1;
 
-	return(IRQ_HANDLED);
+void kill_io_thread(void)
+{
+	if(io_pid != -1) 
+		os_kill_process(io_pid, 1);
 }
 
+__uml_exitcall(kill_io_thread);
+
 static int ubd_file_size(struct ubd *dev, __u64 *size_out)
 {
 	char *file;
@@ -608,7 +569,7 @@ static int ubd_open_dev(struct ubd *dev)
 				&dev->cow.data_offset, create_ptr);
 
 	if((dev->fd == -ENOENT) && create_cow){
-		dev->fd = create_cow_file(dev->file, dev->cow.file,
+		dev->fd = create_cow_file(dev->file, dev->cow.file, 
 					  dev->openflags, 1 << 9, PAGE_SIZE,
 					  &dev->cow.bitmap_offset, 
 					  &dev->cow.bitmap_len,
@@ -870,10 +831,6 @@ int ubd_init(void)
 {
         int i;
 
-	ubd_reply_fd = init_aio_irq(UBD_IRQ, "ubd", ubd_intr);
-	if(ubd_reply_fd < 0)
-		printk("Setting up ubd AIO failed, err = %d\n", ubd_reply_fd);
-
 	devfs_mk_dir("ubd");
 	if (register_blkdev(MAJOR_NR, "ubd"))
 		return -1;
@@ -884,7 +841,6 @@ int ubd_init(void)
 		return -1;
 	}
 		
-	blk_queue_max_hw_segments(ubd_queue, MAX_SG);
 	if (fake_major != MAJOR_NR) {
 		char name[sizeof("ubd_nnn\0")];
 
@@ -896,12 +852,40 @@ int ubd_init(void)
 	driver_register(&ubd_driver);
 	for (i = 0; i < MAX_DEV; i++) 
 		ubd_add(i);
-
 	return 0;
 }
 
 late_initcall(ubd_init);
 
+int ubd_driver_init(void){
+	unsigned long stack;
+	int err;
+
+	/* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/
+	if(global_openflags.s){
+		printk(KERN_INFO "ubd: Synchronous mode\n");
+		/* Letting ubd=sync be like using ubd#s= instead of ubd#= is
+		 * enough. So use anyway the io thread. */
+	}
+	stack = alloc_stack(0, 0);
+	io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), 
+				 &thread_fd);
+	if(io_pid < 0){
+		printk(KERN_ERR 
+		       "ubd : Failed to start I/O thread (errno = %d) - "
+		       "falling back to synchronous I/O\n", -io_pid);
+		io_pid = -1;
+		return(0);
+	}
+	err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, 
+			     SA_INTERRUPT, "ubd", ubd_dev);
+	if(err != 0)
+		printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
+	return(err);
+}
+
+device_initcall(ubd_driver_init);
+
 static int ubd_open(struct inode *inode, struct file *filp)
 {
 	struct gendisk *disk = inode->i_bdev->bd_disk;
@@ -939,55 +923,105 @@ static int ubd_release(struct inode * inode, struct file * file)
 	return(0);
 }
 
-static void cowify_bitmap(struct io_thread_req *req, unsigned long *bitmap)
+static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask,
+			  __u64 *cow_offset, unsigned long *bitmap,
+			  __u64 bitmap_offset, unsigned long *bitmap_words,
+			  __u64 bitmap_len)
 {
-        __u64 sector = req->offset / req->sectorsize;
-        int i;
+	__u64 sector = io_offset >> 9;
+	int i, update_bitmap = 0;
+
+	for(i = 0; i < length >> 9; i++){
+		if(cow_mask != NULL)
+			ubd_set_bit(i, (unsigned char *) cow_mask);
+		if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
+			continue;
 
-        for(i = 0; i < req->length / req->sectorsize; i++){
-                if(ubd_test_bit(sector + i, bitmap))
-                        continue;
+		update_bitmap = 1;
+		ubd_set_bit(sector + i, (unsigned char *) bitmap);
+	}
+
+	if(!update_bitmap)
+		return;
 
-                if(req->bitmap_start == -1)
-                        req->bitmap_start = sector + i;
-                req->bitmap_end = sector + i + 1;
+	*cow_offset = sector / (sizeof(unsigned long) * 8);
 
-                ubd_set_bit(sector + i, bitmap);
-        }
+	/* This takes care of the case where we're exactly at the end of the
+	 * device, and *cow_offset + 1 is off the end.  So, just back it up
+	 * by one word.  Thanks to Lynn Kerby for the fix and James McMechan
+	 * for the original diagnosis.
+	 */
+	if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
+			   sizeof(unsigned long) - 1))
+		(*cow_offset)--;
+
+	bitmap_words[0] = bitmap[*cow_offset];
+	bitmap_words[1] = bitmap[*cow_offset + 1];
+
+	*cow_offset *= sizeof(unsigned long);
+	*cow_offset += bitmap_offset;
+}
+
+static void cowify_req(struct io_thread_req *req, unsigned long *bitmap,
+		       __u64 bitmap_offset, __u64 bitmap_len)
+{
+	__u64 sector = req->offset >> 9;
+	int i;
+
+	if(req->length > (sizeof(req->sector_mask) * 8) << 9)
+		panic("Operation too long");
+
+	if(req->op == UBD_READ) {
+		for(i = 0; i < req->length >> 9; i++){
+			if(ubd_test_bit(sector + i, (unsigned char *) bitmap))
+				ubd_set_bit(i, (unsigned char *) 
+					    &req->sector_mask);
+                }
+	}
+	else cowify_bitmap(req->offset, req->length, &req->sector_mask,
+			   &req->cow_offset, bitmap, bitmap_offset,
+			   req->bitmap_words, bitmap_len);
 }
 
 /* Called with ubd_io_lock held */
-static int prepare_request(struct request *req, struct io_thread_req *io_req,
-                           unsigned long long offset, int page_offset,
-                           int len, struct page *page)
+static int prepare_request(struct request *req, struct io_thread_req *io_req)
 {
 	struct gendisk *disk = req->rq_disk;
 	struct ubd *dev = disk->private_data;
+	__u64 offset;
+	int len;
+
+	if(req->rq_status == RQ_INACTIVE) return(1);
 
 	/* This should be impossible now */
 	if((rq_data_dir(req) == WRITE) && !dev->openflags.w){
 		printk("Write attempted on readonly ubd device %s\n", 
 		       disk->disk_name);
-                ubd_end_request(req, 0, 0);
+		end_request(req, 0);
 		return(1);
 	}
 
+	offset = ((__u64) req->sector) << 9;
+	len = req->current_nr_sectors << 9;
+
 	io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd;
 	io_req->fds[1] = dev->fd;
+	io_req->cow_offset = -1;
 	io_req->offset = offset;
 	io_req->length = len;
 	io_req->error = 0;
-	io_req->op = (rq_data_dir(req) == READ) ? AIO_READ : AIO_WRITE;
+	io_req->sector_mask = 0;
+
+	io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
 	io_req->offsets[0] = 0;
 	io_req->offsets[1] = dev->cow.data_offset;
-        io_req->buffer = page_address(page) + page_offset;
+	io_req->buffer = req->buffer;
 	io_req->sectorsize = 1 << 9;
-        io_req->bitmap_offset = dev->cow.bitmap_offset;
-        io_req->bitmap_start = -1;
-        io_req->bitmap_end = -1;
 
-        if((dev->cow.file != NULL) && (io_req->op == UBD_WRITE))
-                cowify_bitmap(io_req, dev->cow.bitmap);
+	if(dev->cow.file != NULL)
+		cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset,
+			   dev->cow.bitmap_len);
+
 	return(0);
 }
 
@@ -996,36 +1030,30 @@ static void do_ubd_request(request_queue_t *q)
 {
 	struct io_thread_req io_req;
 	struct request *req;
-	__u64 sector;
-	int err;
-
-	if(in_ubd)
-		return;
-	in_ubd = 1;
-	while((req = elv_next_request(q)) != NULL){
-		struct gendisk *disk = req->rq_disk;
-		struct ubd *dev = disk->private_data;
-		int n, i;
-
-		blkdev_dequeue_request(req);
-
-		sector = req->sector;
-		n = blk_rq_map_sg(q, req, dev->sg);
-
-		for(i = 0; i < n; i++){
-			struct scatterlist *sg = &dev->sg[i];
-
-			err = prepare_request(req, &io_req, sector << 9,
-					      sg->offset, sg->length,
-					      sg->page);
-			if(err)
-				continue;
-
-			sector += sg->length >> 9;
-			do_io(&io_req, req, dev->cow.bitmap);
+	int err, n;
+
+	if(thread_fd == -1){
+		while((req = elv_next_request(q)) != NULL){
+			err = prepare_request(req, &io_req);
+			if(!err){
+				do_io(&io_req);
+				__ubd_finish(req, io_req.error);
+			}
+		}
+	}
+	else {
+		if(do_ubd || (req = elv_next_request(q)) == NULL)
+			return;
+		err = prepare_request(req, &io_req);
+		if(!err){
+			do_ubd = ubd_handler;
+			n = os_write_file(thread_fd, (char *) &io_req,
+					 sizeof(io_req));
+			if(n != sizeof(io_req))
+				printk("write to io thread failed, "
+				       "errno = %d\n", -n);
 		}
 	}
-	in_ubd = 0;
 }
 
 static int ubd_ioctl(struct inode * inode, struct file * file,
@@ -1241,95 +1269,131 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags,
 	return(err);
 }
 
-void do_io(struct io_thread_req *req, struct request *r, unsigned long *bitmap)
+static int update_bitmap(struct io_thread_req *req)
 {
-        struct ubd_aio *aio;
-        struct bitmap_io *bitmap_io = NULL;
-        char *buf;
-        void *bitmap_buf = NULL;
-        unsigned long len, sector;
-        int nsectors, start, end, bit, err;
-        __u64 off;
-
-        if(req->bitmap_start != -1){
-                /* Round up to the nearest word */
-                int round = sizeof(unsigned long);
-                len = (req->bitmap_end - req->bitmap_start +
-                       round * 8 - 1) / (round * 8);
-                len *= round;
-
-                off = req->bitmap_start / (8 * round);
-                off *= round;
-
-                bitmap_io = kmalloc(sizeof(*bitmap_io), GFP_KERNEL);
-                if(bitmap_io == NULL){
-                        printk("Failed to kmalloc bitmap IO\n");
-                        req->error = 1;
-                        return;
-                }
+	int n;
 
-                bitmap_buf = kmalloc(len, GFP_KERNEL);
-                if(bitmap_buf == NULL){
-                        printk("do_io : kmalloc of bitmap chunk "
-                               "failed\n");
-                        kfree(bitmap_io);
-                        req->error = 1;
-                        return;
-                }
-                memcpy(bitmap_buf, &bitmap[off / sizeof(bitmap[0])], len);
-
-                *bitmap_io = ((struct bitmap_io)
-                        { .count	= ATOMIC_INIT(0),
-                          .aio		= INIT_AIO(AIO_WRITE, req->fds[1],
-                                                   bitmap_buf, len,
-                                                   req->bitmap_offset + off,
-                                                   ubd_reply_fd) } );
-        }
+	if(req->cow_offset == -1)
+		return(0);
 
-        nsectors = req->length / req->sectorsize;
-        start = 0;
-        end = nsectors;
-        bit = 0;
-        do {
-                if(bitmap != NULL){
-                        sector = req->offset / req->sectorsize;
-                        bit = ubd_test_bit(sector + start, bitmap);
-                        end = start;
-                        while((end < nsectors) &&
-                              (ubd_test_bit(sector + end, bitmap) == bit))
-                                end++;
-                }
+	n = os_seek_file(req->fds[1], req->cow_offset);
+	if(n < 0){
+		printk("do_io - bitmap lseek failed : err = %d\n", -n);
+		return(1);
+	}
 
-                off = req->offsets[bit] + req->offset +
-                        start * req->sectorsize;
-                len = (end - start) * req->sectorsize;
-                buf = &req->buffer[start * req->sectorsize];
+	n = os_write_file(req->fds[1], &req->bitmap_words,
+		          sizeof(req->bitmap_words));
+	if(n != sizeof(req->bitmap_words)){
+		printk("do_io - bitmap update failed, err = %d fd = %d\n", -n,
+		       req->fds[1]);
+		return(1);
+	}
 
-                aio = kmalloc(sizeof(*aio), GFP_KERNEL);
-                if(aio == NULL){
-                        req->error = 1;
-                        return;
-                }
+	return(0);
+}
 
-                *aio = ((struct ubd_aio)
-                        { .aio		= INIT_AIO(req->op, req->fds[bit], buf,
-                                                   len, off, ubd_reply_fd),
-                          .len		= len,
-                          .req		= r,
-                          .bitmap	= bitmap_io,
-                          .bitmap_buf 	= bitmap_buf });
-
-                if(aio->bitmap != NULL)
-                        atomic_inc(&aio->bitmap->count);
-
-                err = submit_aio(&aio->aio);
-                if(err){
-                        printk("do_io - submit_aio failed, "
-                               "err = %d\n", err);
-                        req->error = 1;
-                        return;
-                }
+void do_io(struct io_thread_req *req)
+{
+	char *buf;
+	unsigned long len;
+	int n, nsectors, start, end, bit;
+	int err;
+	__u64 off;
+
+	nsectors = req->length / req->sectorsize;
+	start = 0;
+	do {
+		bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask);
+		end = start;
+		while((end < nsectors) &&
+		      (ubd_test_bit(end, (unsigned char *)
+				    &req->sector_mask) == bit))
+			end++;
+
+		off = req->offset + req->offsets[bit] +
+			start * req->sectorsize;
+		len = (end - start) * req->sectorsize;
+		buf = &req->buffer[start * req->sectorsize];
+
+		err = os_seek_file(req->fds[bit], off);
+		if(err < 0){
+			printk("do_io - lseek failed : err = %d\n", -err);
+			req->error = 1;
+			return;
+		}
+		if(req->op == UBD_READ){
+			n = 0;
+			do {
+				buf = &buf[n];
+				len -= n;
+				n = os_read_file(req->fds[bit], buf, len);
+				if (n < 0) {
+					printk("do_io - read failed, err = %d "
+					       "fd = %d\n", -n, req->fds[bit]);
+					req->error = 1;
+					return;
+				}
+			} while((n < len) && (n != 0));
+			if (n < len) memset(&buf[n], 0, len - n);
+		} else {
+			n = os_write_file(req->fds[bit], buf, len);
+			if(n != len){
+				printk("do_io - write failed err = %d "
+				       "fd = %d\n", -n, req->fds[bit]);
+				req->error = 1;
+				return;
+			}
+		}
+
+		start = end;
+	} while(start < nsectors);
 
-                start = end;
-        } while(start < nsectors);
+	req->error = update_bitmap(req);
 }
+
+/* Changed in start_io_thread, which is serialized by being called only
+ * from ubd_init, which is an initcall.
+ */
+int kernel_fd = -1;
+
+/* Only changed by the io thread */
+int io_count = 0;
+
+int io_thread(void *arg)
+{
+	struct io_thread_req req;
+	int n;
+
+	ignore_sigwinch_sig();
+	while(1){
+		n = os_read_file(kernel_fd, &req, sizeof(req));
+		if(n != sizeof(req)){
+			if(n < 0)
+				printk("io_thread - read failed, fd = %d, "
+				       "err = %d\n", kernel_fd, -n);
+			else {
+				printk("io_thread - short read, fd = %d, "
+				       "length = %d\n", kernel_fd, n);
+			}
+			continue;
+		}
+		io_count++;
+		do_io(&req);
+		n = os_write_file(kernel_fd, &req, sizeof(req));
+		if(n != sizeof(req))
+			printk("io_thread - write failed, fd = %d, err = %d\n",
+			       kernel_fd, -n);
+	}
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */

arch/um/drivers/ubd_user.c

@@ -0,0 +1,75 @@
+/* 
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com)
+ * Licensed under the GPL
+ */
+
+#include <stddef.h>
+#include <unistd.h>
+#include <errno.h>
+#include <sched.h>
+#include <signal.h>
+#include <string.h>
+#include <netinet/in.h>
+#include <sys/time.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <sys/param.h>
+#include "asm/types.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "user.h"
+#include "ubd_user.h"
+#include "os.h"
+#include "cow.h"
+
+#include <endian.h>
+#include <byteswap.h>
+
+void ignore_sigwinch_sig(void)
+{
+	signal(SIGWINCH, SIG_IGN);
+}
+
+int start_io_thread(unsigned long sp, int *fd_out)
+{
+	int pid, fds[2], err;
+
+	err = os_pipe(fds, 1, 1);
+	if(err < 0){
+		printk("start_io_thread - os_pipe failed, err = %d\n", -err);
+		goto out;
+	}
+
+	kernel_fd = fds[0];
+	*fd_out = fds[1];
+
+	pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD,
+		    NULL);
+	if(pid < 0){
+		printk("start_io_thread - clone failed : errno = %d\n", errno);
+		err = -errno;
+		goto out_close;
+	}
+
+	return(pid);
+
+ out_close:
+	os_close_file(fds[0]);
+	os_close_file(fds[1]);
+	kernel_fd = -1;
+	*fd_out = -1;
+ out:
+	return(err);
+}
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */

arch/um/include/aio.h

@@ -14,27 +14,15 @@ struct aio_thread_reply {
 };
 
 struct aio_context {
-	enum aio_type type;
-	int fd;
-	void *data;
-	int len;
-	unsigned long long offset;
 	int reply_fd;
 	struct aio_context *next;
 };
 
-#define INIT_AIO(aio_type, aio_fd, aio_data, aio_len, aio_offset, \
-		 aio_reply_fd) \
-	{ .type 	= aio_type, \
-	  .fd		= aio_fd, \
-	  .data		= aio_data, \
-	  .len		= aio_len, \
-	  .offset	= aio_offset, \
-	  .reply_fd	= aio_reply_fd }
-
 #define INIT_AIO_CONTEXT { .reply_fd	= -1, \
 			   .next	= NULL }
 
-extern int submit_aio(struct aio_context *aio);
+extern int submit_aio(enum aio_type type, int fd, char *buf, int len,
+		      unsigned long long offset, int reply_fd,
+                      struct aio_context *aio);
 
 #endif

arch/um/include/os.h

@@ -6,6 +6,7 @@
 #ifndef __OS_H__
 #define __OS_H__
 
+#include "uml-config.h"
 #include "asm/types.h"
 #include "../os/include/file.h"
 
@@ -159,7 +160,11 @@ extern int can_do_skas(void);
 
 /* Make sure they are clear when running in TT mode. Required by
  * SEGV_MAYBE_FIXABLE */
+#ifdef UML_CONFIG_MODE_SKAS
 #define clear_can_do_skas() do { ptrace_faultinfo = proc_mm = 0; } while (0)
+#else
+#define clear_can_do_skas() do {} while (0)
+#endif
 
 /* mem.c */
 extern int create_mem_file(unsigned long len);

arch/um/include/sysdep-x86_64/ptrace.h

@@ -183,10 +183,6 @@ struct syscall_args {
                 case RBP: val = UPT_RBP(regs); break; \
                 case ORIG_RAX: val = UPT_ORIG_RAX(regs); break; \
                 case CS: val = UPT_CS(regs); break; \
-                case DS: val = UPT_DS(regs); break; \
-                case ES: val = UPT_ES(regs); break; \
-                case FS: val = UPT_FS(regs); break; \
-                case GS: val = UPT_GS(regs); break; \
                 case EFLAGS: val = UPT_EFLAGS(regs); break; \
                 default :  \
                         panic("Bad register in UPT_REG : %d\n", reg);  \

arch/um/os-Linux/aio.c

@@ -6,7 +6,6 @@
 #include <stdlib.h>
 #include <unistd.h>
 #include <signal.h>
-#include <string.h>
 #include <errno.h>
 #include <sched.h>
 #include <sys/syscall.h>
@@ -17,31 +16,18 @@
 #include "user.h"
 #include "mode.h"
 
+struct aio_thread_req {
+        enum aio_type type;
+        int io_fd;
+        unsigned long long offset;
+        char *buf;
+        int len;
+        struct aio_context *aio;
+};
+
 static int aio_req_fd_r = -1;
 static int aio_req_fd_w = -1;
 
-static int update_aio(struct aio_context *aio, int res)
-{
-        if(res < 0)
-                aio->len = res;
-        else if((res == 0) && (aio->type == AIO_READ)){
-                /* This is the EOF case - we have hit the end of the file
-                 * and it ends in a partial block, so we fill the end of
-                 * the block with zeros and claim success.
-                 */
-                memset(aio->data, 0, aio->len);
-                aio->len = 0;
-        }
-        else if(res > 0){
-                aio->len -= res;
-                aio->data += res;
-                aio->offset += res;
-                return aio->len;
-        }
-
-        return 0;
-}
-
 #if defined(HAVE_AIO_ABI)
 #include <linux/aio_abi.h>
 
@@ -80,7 +66,8 @@ static long io_getevents(aio_context_t ctx_id, long min_nr, long nr,
  * that it now backs the mmapped area.
  */
 
-static int do_aio(aio_context_t ctx, struct aio_context *aio)
+static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf,
+                  int len, unsigned long long offset, struct aio_context *aio)
 {
         struct iocb iocb, *iocbp = &iocb;
         char c;
@@ -88,39 +75,40 @@ static int do_aio(aio_context_t ctx, struct aio_context *aio)
 
         iocb = ((struct iocb) { .aio_data 	= (unsigned long) aio,
                                 .aio_reqprio	= 0,
-                                .aio_fildes	= aio->fd,
-                                .aio_buf	= (unsigned long) aio->data,
-                                .aio_nbytes	= aio->len,
-                                .aio_offset	= aio->offset,
+                                .aio_fildes	= fd,
+                                .aio_buf	= (unsigned long) buf,
+                                .aio_nbytes	= len,
+                                .aio_offset	= offset,
                                 .aio_reserved1	= 0,
                                 .aio_reserved2	= 0,
                                 .aio_reserved3	= 0 });
 
-        switch(aio->type){
+        switch(type){
         case AIO_READ:
                 iocb.aio_lio_opcode = IOCB_CMD_PREAD;
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         case AIO_WRITE:
                 iocb.aio_lio_opcode = IOCB_CMD_PWRITE;
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         case AIO_MMAP:
                 iocb.aio_lio_opcode = IOCB_CMD_PREAD;
                 iocb.aio_buf = (unsigned long) &c;
                 iocb.aio_nbytes = sizeof(c);
+                err = io_submit(ctx, 1, &iocbp);
                 break;
         default:
-                printk("Bogus op in do_aio - %d\n", aio->type);
+                printk("Bogus op in do_aio - %d\n", type);
                 err = -EINVAL;
-                goto out;
+                break;
         }
 
-        err = io_submit(ctx, 1, &iocbp);
         if(err > 0)
                 err = 0;
 	else
 		err = -errno;
 
- out:
         return err;
 }
 
@@ -129,9 +117,8 @@ static aio_context_t ctx = 0;
 static int aio_thread(void *arg)
 {
         struct aio_thread_reply reply;
-        struct aio_context *aio;
         struct io_event event;
-        int err, n;
+        int err, n, reply_fd;
 
         signal(SIGWINCH, SIG_IGN);
 
@@ -144,22 +131,14 @@ static int aio_thread(void *arg)
                                "errno = %d\n", errno);
                 }
                 else {
-			/* This is safe as we've just a pointer here. */
-			aio = (struct aio_context *) (long) event.data;
-			if(update_aio(aio, event.res)){
-				do_aio(ctx, aio);
-				continue;
-			}
-
                         reply = ((struct aio_thread_reply)
-				{ .data = aio,
-				  .err	= aio->len });
-			err = os_write_file(aio->reply_fd, &reply,
-					    sizeof(reply));
+				 { .data = (void *) (long) event.data,
+				   .err	= event.res });
+			reply_fd = ((struct aio_context *) reply.data)->reply_fd;
+			err = os_write_file(reply_fd, &reply, sizeof(reply));
                         if(err != sizeof(reply))
-				printk("aio_thread - write failed, "
-				       "fd = %d, err = %d\n", aio->reply_fd,
-				       -err);
+				printk("aio_thread - write failed, fd = %d, "
+                                       "err = %d\n", aio_req_fd_r, -err);
                 }
         }
         return 0;
@@ -167,35 +146,35 @@ static int aio_thread(void *arg)
 
 #endif
 
-static int do_not_aio(struct aio_context *aio)
+static int do_not_aio(struct aio_thread_req *req)
 {
         char c;
         int err;
 
-        switch(aio->type){
+        switch(req->type){
         case AIO_READ:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_read_file(aio->fd, aio->data, aio->len);
+                err = os_read_file(req->io_fd, req->buf, req->len);
                 break;
         case AIO_WRITE:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_write_file(aio->fd, aio->data, aio->len);
+                err = os_write_file(req->io_fd, req->buf, req->len);
                 break;
         case AIO_MMAP:
-                err = os_seek_file(aio->fd, aio->offset);
+                err = os_seek_file(req->io_fd, req->offset);
                 if(err)
                         goto out;
 
-                err = os_read_file(aio->fd, &c, sizeof(c));
+                err = os_read_file(req->io_fd, &c, sizeof(c));
                 break;
         default:
-                printk("do_not_aio - bad request type : %d\n", aio->type);
+                printk("do_not_aio - bad request type : %d\n", req->type);
                 err = -EINVAL;
                 break;
         }
@@ -206,14 +185,14 @@ static int do_not_aio(struct aio_context *aio)
 
 static int not_aio_thread(void *arg)
 {
-        struct aio_context *aio;
+        struct aio_thread_req req;
         struct aio_thread_reply reply;
         int err;
 
         signal(SIGWINCH, SIG_IGN);
         while(1){
-                err = os_read_file(aio_req_fd_r, &aio, sizeof(aio));
-                if(err != sizeof(aio)){
+                err = os_read_file(aio_req_fd_r, &req, sizeof(req));
+                if(err != sizeof(req)){
                         if(err < 0)
                                 printk("not_aio_thread - read failed, "
                                        "fd = %d, err = %d\n", aio_req_fd_r,
@@ -224,34 +203,17 @@ static int not_aio_thread(void *arg)
                         }
                         continue;
                 }
- again:
-                err = do_not_aio(aio);
-
-                if(update_aio(aio, err))
-                        goto again;
-
-                reply = ((struct aio_thread_reply) { .data 	= aio,
-                                                     .err	= aio->len });
-                err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
+                err = do_not_aio(&req);
+                reply = ((struct aio_thread_reply) { .data 	= req.aio,
+                                                     .err	= err });
+                err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply));
                 if(err != sizeof(reply))
                         printk("not_aio_thread - write failed, fd = %d, "
                                "err = %d\n", aio_req_fd_r, -err);
         }
 }
 
-static int submit_aio_24(struct aio_context *aio)
-{
-        int err;
-
-        err = os_write_file(aio_req_fd_w, &aio, sizeof(aio));
-        if(err == sizeof(aio))
-                err = 0;
-
-        return err;
-}
-
 static int aio_pid = -1;
-static int (*submit_proc)(struct aio_context *aio);
 
 static int init_aio_24(void)
 {
@@ -283,33 +245,11 @@ static int init_aio_24(void)
 #endif
 	printk("2.6 host AIO support not used - falling back to I/O "
 	       "thread\n");
-
-	submit_proc = submit_aio_24;
-
         return 0;
 }
 
 #ifdef HAVE_AIO_ABI
 #define DEFAULT_24_AIO 0
-static int submit_aio_26(struct aio_context *aio)
-{
-	struct aio_thread_reply reply;
-	int err;
-
-	err = do_aio(ctx, aio);
-	if(err){
-		reply = ((struct aio_thread_reply) { .data = aio,
-					             .err  = err });
-		err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
-		if(err != sizeof(reply))
-			printk("submit_aio_26 - write failed, "
-			       "fd = %d, err = %d\n", aio->reply_fd, -err);
-		else err = 0;
-	}
-
-	return err;
-}
-
 static int init_aio_26(void)
 {
         unsigned long stack;
@@ -330,22 +270,39 @@ static int init_aio_26(void)
         aio_pid = err;
 
 	printk("Using 2.6 host AIO\n");
+        return 0;
+}
+
+static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
+{
+        struct aio_thread_reply reply;
+        int err;
 
-	submit_proc = submit_aio_26;
+        err = do_aio(ctx, type, io_fd, buf, len, offset, aio);
+        if(err){
+                reply = ((struct aio_thread_reply) { .data = aio,
+                                                     .err  = err });
+                err = os_write_file(aio->reply_fd, &reply, sizeof(reply));
+                if(err != sizeof(reply))
+                        printk("submit_aio_26 - write failed, "
+                               "fd = %d, err = %d\n", aio->reply_fd, -err);
+                else err = 0;
+        }
 
-        return 0;
+        return err;
 }
 
 #else
 #define DEFAULT_24_AIO 1
-static int submit_aio_26(struct aio_context *aio)
+static int init_aio_26(void)
 {
         return -ENOSYS;
 }
 
-static int init_aio_26(void)
+static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
 {
-	submit_proc = submit_aio_26;
         return -ENOSYS;
 }
 #endif
@@ -412,7 +369,33 @@ static void exit_aio(void)
 
 __uml_exitcall(exit_aio);
 
-int submit_aio(struct aio_context *aio)
+static int submit_aio_24(enum aio_type type, int io_fd, char *buf, int len,
+			 unsigned long long offset, struct aio_context *aio)
 {
-	return (*submit_proc)(aio);
+        struct aio_thread_req req = { .type 		= type,
+                                      .io_fd		= io_fd,
+                                      .offset		= offset,
+                                      .buf		= buf,
+                                      .len		= len,
+                                      .aio		= aio,
+        };
+        int err;
+
+        err = os_write_file(aio_req_fd_w, &req, sizeof(req));
+        if(err == sizeof(req))
+                err = 0;
+
+        return err;
+}
+
+int submit_aio(enum aio_type type, int io_fd, char *buf, int len,
+               unsigned long long offset, int reply_fd,
+               struct aio_context *aio)
+{
+        aio->reply_fd = reply_fd;
+        if(aio_24)
+                return submit_aio_24(type, io_fd, buf, len, offset, aio);
+        else {
+                return submit_aio_26(type, io_fd, buf, len, offset, aio);
+        }
 }

drivers/acpi/event.c

@@ -58,9 +58,8 @@ acpi_system_read_event(struct file *file, char __user * buffer, size_t count,
 			return_VALUE(-EAGAIN);
 
 		result = acpi_bus_receive_event(&event);
-		if (result) {
-			return_VALUE(-EIO);
-		}
+		if (result)
+			return_VALUE(result);
 
 		chars_remaining = sprintf(str, "%s %s %08x %08x\n",
 					  event.device_class ? event.

drivers/acpi/glue.c

@@ -96,7 +96,7 @@ struct acpi_find_pci_root {
 static acpi_status
 do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
 {
-	int *busnr = (int *)data;
+	unsigned long *busnr = (unsigned long *)data;
 	struct acpi_resource_address64 address;
 
 	if (resource->id != ACPI_RSTYPE_ADDRESS16 &&
@@ -115,13 +115,13 @@ do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
 static int get_root_bridge_busnr(acpi_handle handle)
 {
 	acpi_status status;
-	int bus, bbn;
+	unsigned long bus, bbn;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
 
 	status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL,
-				       (unsigned long *)&bbn);
+				       &bbn);
 	if (status == AE_NOT_FOUND) {
 		/* Assume bus = 0 */
 		printk(KERN_INFO PREFIX
@@ -153,7 +153,7 @@ static int get_root_bridge_busnr(acpi_handle handle)
 	}
       exit:
 	acpi_os_free(buffer.pointer);
-	return bbn;
+	return (int)bbn;
 }
 
 static acpi_status

drivers/char/.gitignore

@@ -0,0 +1,3 @@
+consolemap_deftbl.c
+defkeymap.c
+

drivers/char/drm/drm_vm.c

@@ -148,7 +148,8 @@ static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma,
 
 	offset	 = address - vma->vm_start;
 	i = (unsigned long)map->handle + offset;
-	page = vmalloc_to_page((void *)i);
+	page = (map->type == _DRM_CONSISTENT) ?
+		virt_to_page((void *)i) : vmalloc_to_page((void *)i);
 	if (!page)
 		return NOPAGE_OOM;
 	get_page(page);

drivers/char/drm/mga_dma.c

@@ -437,7 +437,7 @@ static int mga_do_agp_dma_bootstrap(drm_device_t * dev,
 				    drm_mga_dma_bootstrap_t * dma_bs)
 {
 	drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
-	const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+	unsigned int warp_size = mga_warp_microcode_size(dev_priv);
 	int err;
 	unsigned  offset;
 	const unsigned secondary_size = dma_bs->secondary_bin_count
@@ -499,6 +499,12 @@ static int mga_do_agp_dma_bootstrap(drm_device_t * dev,
 		return err;
 	}
 
+	/* Make drm_addbufs happy by not trying to create a mapping for less
+	 * than a page.
+	 */
+	if (warp_size < PAGE_SIZE)
+		warp_size = PAGE_SIZE;
+
 	offset = 0;
 	err = drm_addmap( dev, offset, warp_size,
 			  _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp );
@@ -587,7 +593,7 @@ static int mga_do_pci_dma_bootstrap(drm_device_t * dev,
 				    drm_mga_dma_bootstrap_t * dma_bs)
 {
 	drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
-	const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+	unsigned int warp_size = mga_warp_microcode_size(dev_priv);
 	unsigned int primary_size;
 	unsigned int bin_count;
 	int err;
@@ -599,6 +605,12 @@ static int mga_do_pci_dma_bootstrap(drm_device_t * dev,
 		return DRM_ERR(EFAULT);
 	}
 
+	/* Make drm_addbufs happy by not trying to create a mapping for less
+	 * than a page.
+	 */
+	if (warp_size < PAGE_SIZE)
+		warp_size = PAGE_SIZE;
+
 	/* The proper alignment is 0x100 for this mapping */
 	err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT,
 			 _DRM_READ_ONLY, &dev_priv->warp);
@@ -812,6 +824,10 @@ static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init )
 	}
 
 	if (! dev_priv->used_new_dma_init) {
+
+		dev_priv->dma_access = MGA_PAGPXFER;
+		dev_priv->wagp_enable = MGA_WAGP_ENABLE;
+
 		dev_priv->status = drm_core_findmap(dev, init->status_offset);
 		if (!dev_priv->status) {
 			DRM_ERROR("failed to find status page!\n");
@@ -928,7 +944,7 @@ static int mga_do_cleanup_dma( drm_device_t *dev )
 		drm_mga_private_t *dev_priv = dev->dev_private;
 
 		if ((dev_priv->warp != NULL) 
-		    && (dev_priv->mmio->type != _DRM_CONSISTENT))
+		    && (dev_priv->warp->type != _DRM_CONSISTENT))
 			drm_core_ioremapfree(dev_priv->warp, dev);
 
 		if ((dev_priv->primary != NULL) 

drivers/char/drm/mga_drv.h

@@ -227,7 +227,7 @@ static inline u32 _MGA_READ(u32 *addr)
 #define MGA_EMIT_STATE( dev_priv, dirty )				\
 do {									\
 	if ( (dirty) & ~MGA_UPLOAD_CLIPRECTS ) {			\
-		if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {	\
+		if ( dev_priv->chipset >= MGA_CARD_TYPE_G400 ) {	\
 			mga_g400_emit_state( dev_priv );		\
 		} else {						\
 			mga_g200_emit_state( dev_priv );		\

drivers/char/drm/mga_state.c

@@ -53,7 +53,7 @@ static void mga_emit_clip_rect( drm_mga_private_t *dev_priv,
 
 	/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
 	 */
-	if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+	if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
 		DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
 			  MGA_LEN + MGA_EXEC, 0x80000000,
 			  MGA_DWGCTL, ctx->dwgctl,

drivers/char/mbcs.c

@@ -830,6 +830,9 @@ static int __init mbcs_init(void)
 {
 	int rv;
 
+	if (!ia64_platform_is("sn2"))
+		return -ENODEV;
+
 	// Put driver into chrdevs[].  Get major number.
 	rv = register_chrdev(mbcs_major, DEVICE_NAME, &mbcs_ops);
 	if (rv < 0) {

drivers/char/n_r3964.c

@@ -695,7 +695,7 @@ static void receive_char(struct r3964_info *pInfo, const unsigned char c)
             {
                TRACE_PE("IDLE - got STX but no space in rx_queue!");
                pInfo->state=R3964_WAIT_FOR_RX_BUF;
-	       mod_timer(&pInfo->tmr, R3964_TO_NO_BUF);
+	       mod_timer(&pInfo->tmr, jiffies + R3964_TO_NO_BUF);
                break;
             }
 start_receiving:
@@ -705,7 +705,7 @@ start_receiving:
             pInfo->last_rx = 0;
             pInfo->flags &= ~R3964_ERROR;
             pInfo->state=R3964_RECEIVING;
-	    mod_timer(&pInfo->tmr, R3964_TO_ZVZ);
+	    mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ);
 	    pInfo->nRetry = 0;
             put_char(pInfo, DLE);
             flush(pInfo);
@@ -732,7 +732,7 @@ start_receiving:
                if(pInfo->flags & R3964_BCC)
                {
                   pInfo->state = R3964_WAIT_FOR_BCC;
-		  mod_timer(&pInfo->tmr, R3964_TO_ZVZ);
+		  mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ);
                }
                else 
                {
@@ -744,7 +744,7 @@ start_receiving:
                pInfo->last_rx = c;
 char_to_buf:
                pInfo->rx_buf[pInfo->rx_position++] = c;
-	       mod_timer(&pInfo->tmr, R3964_TO_ZVZ);
+	       mod_timer(&pInfo->tmr, jiffies + R3964_TO_ZVZ);
             }
          }
         /* else: overflow-msg? BUF_SIZE>MTU; should not happen? */ 

drivers/ieee1394/ohci1394.c

@@ -2283,8 +2283,9 @@ static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci,
 {
 	struct ohci1394_iso_tasklet *t;
 	unsigned long mask;
+	unsigned long flags;
 
-	spin_lock(&ohci->iso_tasklet_list_lock);
+	spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags);
 
 	list_for_each_entry(t, &ohci->iso_tasklet_list, link) {
 		mask = 1 << t->context;
@@ -2295,8 +2296,7 @@ static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci,
 			tasklet_schedule(&t->tasklet);
 	}
 
-	spin_unlock(&ohci->iso_tasklet_list_lock);
-
+	spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags);
 }
 
 static irqreturn_t ohci_irq_handler(int irq, void *dev_id,

drivers/ieee1394/raw1394.c

@@ -412,6 +412,7 @@ static void fcp_request(struct hpsb_host *host, int nodeid, int direction,
 static ssize_t raw1394_read(struct file *file, char __user * buffer,
 			    size_t count, loff_t * offset_is_ignored)
 {
+	unsigned long flags;
 	struct file_info *fi = (struct file_info *)file->private_data;
 	struct list_head *lh;
 	struct pending_request *req;
@@ -435,10 +436,10 @@ static ssize_t raw1394_read(struct file *file, char __user * buffer,
 		}
 	}
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	lh = fi->req_complete.next;
 	list_del(lh);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	req = list_entry(lh, struct pending_request, list);
 
@@ -486,6 +487,7 @@ static int state_opened(struct file_info *fi, struct pending_request *req)
 
 static int state_initialized(struct file_info *fi, struct pending_request *req)
 {
+	unsigned long flags;
 	struct host_info *hi;
 	struct raw1394_khost_list *khl;
 
@@ -499,7 +501,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req)
 
 	switch (req->req.type) {
 	case RAW1394_REQ_LIST_CARDS:
-		spin_lock_irq(&host_info_lock);
+		spin_lock_irqsave(&host_info_lock, flags);
 		khl = kmalloc(sizeof(struct raw1394_khost_list) * host_count,
 			      SLAB_ATOMIC);
 
@@ -513,7 +515,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req)
 				khl++;
 			}
 		}
-		spin_unlock_irq(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, flags);
 
 		if (khl != NULL) {
 			req->req.error = RAW1394_ERROR_NONE;
@@ -528,7 +530,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req)
 		break;
 
 	case RAW1394_REQ_SET_CARD:
-		spin_lock_irq(&host_info_lock);
+		spin_lock_irqsave(&host_info_lock, flags);
 		if (req->req.misc < host_count) {
 			list_for_each_entry(hi, &host_info_list, list) {
 				if (!req->req.misc--)
@@ -550,7 +552,7 @@ static int state_initialized(struct file_info *fi, struct pending_request *req)
 		} else {
 			req->req.error = RAW1394_ERROR_INVALID_ARG;
 		}
-		spin_unlock_irq(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, flags);
 
 		req->req.length = 0;
 		break;
@@ -569,7 +571,6 @@ static void handle_iso_listen(struct file_info *fi, struct pending_request *req)
 {
 	int channel = req->req.misc;
 
-	spin_lock_irq(&host_info_lock);
 	if ((channel > 63) || (channel < -64)) {
 		req->req.error = RAW1394_ERROR_INVALID_ARG;
 	} else if (channel >= 0) {
@@ -601,7 +602,6 @@ static void handle_iso_listen(struct file_info *fi, struct pending_request *req)
 
 	req->req.length = 0;
 	queue_complete_req(req);
-	spin_unlock_irq(&host_info_lock);
 }
 
 static void handle_fcp_listen(struct file_info *fi, struct pending_request *req)
@@ -627,6 +627,7 @@ static void handle_fcp_listen(struct file_info *fi, struct pending_request *req)
 static int handle_async_request(struct file_info *fi,
 				struct pending_request *req, int node)
 {
+	unsigned long flags;
 	struct hpsb_packet *packet = NULL;
 	u64 addr = req->req.address & 0xffffffffffffULL;
 
@@ -761,9 +762,9 @@ static int handle_async_request(struct file_info *fi,
 	hpsb_set_packet_complete_task(packet,
 				      (void (*)(void *))queue_complete_cb, req);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	packet->generation = req->req.generation;
 
@@ -779,6 +780,7 @@ static int handle_async_request(struct file_info *fi,
 static int handle_iso_send(struct file_info *fi, struct pending_request *req,
 			   int channel)
 {
+	unsigned long flags;
 	struct hpsb_packet *packet;
 
 	packet = hpsb_make_isopacket(fi->host, req->req.length, channel & 0x3f,
@@ -804,9 +806,9 @@ static int handle_iso_send(struct file_info *fi, struct pending_request *req,
 				      (void (*)(void *))queue_complete_req,
 				      req);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	/* Update the generation of the packet just before sending. */
 	packet->generation = req->req.generation;
@@ -821,6 +823,7 @@ static int handle_iso_send(struct file_info *fi, struct pending_request *req,
 
 static int handle_async_send(struct file_info *fi, struct pending_request *req)
 {
+	unsigned long flags;
 	struct hpsb_packet *packet;
 	int header_length = req->req.misc & 0xffff;
 	int expect_response = req->req.misc >> 16;
@@ -867,9 +870,9 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req)
 	hpsb_set_packet_complete_task(packet,
 				      (void (*)(void *))queue_complete_cb, req);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	/* Update the generation of the packet just before sending. */
 	packet->generation = req->req.generation;
@@ -885,6 +888,7 @@ static int handle_async_send(struct file_info *fi, struct pending_request *req)
 static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 		    u64 addr, size_t length, u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -899,7 +903,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 	       "addr: %4.4x %8.8x length: %Zu", nodeid,
 	       (u16) ((addr >> 32) & 0xFFFF), (u32) (addr & 0xFFFFFFFF),
 	       length);
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search address-entry */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -924,7 +928,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 	if (!found) {
 		printk(KERN_ERR "raw1394: arm_read FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_read addr_entry FOUND");
@@ -954,7 +958,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
 			DBGMSG("arm_read -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -974,7 +978,7 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 		if (!(req->data)) {
 			free_pending_request(req);
 			DBGMSG("arm_read -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1031,13 +1035,14 @@ static int arm_read(struct hpsb_host *host, int nodeid, quadlet_t * buffer,
 			    sizeof(struct arm_request));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
 static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 		     quadlet_t * data, u64 addr, size_t length, u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -1052,7 +1057,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 	       "addr: %4.4x %8.8x length: %Zu", nodeid,
 	       (u16) ((addr >> 32) & 0xFFFF), (u32) (addr & 0xFFFFFFFF),
 	       length);
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search address-entry */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -1077,7 +1082,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 	if (!found) {
 		printk(KERN_ERR "raw1394: arm_write FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_write addr_entry FOUND");
@@ -1106,7 +1111,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
 			DBGMSG("arm_write -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request my be retried */
 		}
@@ -1118,7 +1123,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 		if (!(req->data)) {
 			free_pending_request(req);
 			DBGMSG("arm_write -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1165,7 +1170,7 @@ static int arm_write(struct hpsb_host *host, int nodeid, int destid,
 			    sizeof(struct arm_request));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
@@ -1173,6 +1178,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store,
 		    u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
 		    u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -1198,7 +1204,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store,
 		       (u32) (addr & 0xFFFFFFFF), ext_tcode & 0xFF,
 		       be32_to_cpu(data), be32_to_cpu(arg));
 	}
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search address-entry */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -1224,7 +1230,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store,
 	if (!found) {
 		printk(KERN_ERR "raw1394: arm_lock FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_lock addr_entry FOUND");
@@ -1307,7 +1313,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store,
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
 			DBGMSG("arm_lock -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1316,7 +1322,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store,
 		if (!(req->data)) {
 			free_pending_request(req);
 			DBGMSG("arm_lock -> rcode_conflict_error");
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
 		}
@@ -1382,7 +1388,7 @@ static int arm_lock(struct hpsb_host *host, int nodeid, quadlet_t * store,
 			    sizeof(struct arm_response) + 2 * sizeof(*store));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
@@ -1390,6 +1396,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store,
 		      u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
 		      u16 flags)
 {
+	unsigned long irqflags;
 	struct pending_request *req;
 	struct host_info *hi;
 	struct file_info *fi = NULL;
@@ -1422,7 +1429,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store,
 		       (u32) ((be64_to_cpu(arg) >> 32) & 0xFFFFFFFF),
 		       (u32) (be64_to_cpu(arg) & 0xFFFFFFFF));
 	}
-	spin_lock(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, irqflags);
 	hi = find_host_info(host);	/* search addressentry in file_info's for host */
 	if (hi != NULL) {
 		list_for_each_entry(fi, &hi->file_info_list, list) {
@@ -1449,7 +1456,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store,
 		printk(KERN_ERR
 		       "raw1394: arm_lock64 FAILED addr_entry not found"
 		       " -> rcode_address_error\n");
-		spin_unlock(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, irqflags);
 		return (RCODE_ADDRESS_ERROR);
 	} else {
 		DBGMSG("arm_lock64 addr_entry FOUND");
@@ -1533,7 +1540,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store,
 		DBGMSG("arm_lock64 -> entering notification-section");
 		req = __alloc_pending_request(SLAB_ATOMIC);
 		if (!req) {
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			DBGMSG("arm_lock64 -> rcode_conflict_error");
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
@@ -1542,7 +1549,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store,
 		req->data = kmalloc(size, SLAB_ATOMIC);
 		if (!(req->data)) {
 			free_pending_request(req);
-			spin_unlock(&host_info_lock);
+			spin_unlock_irqrestore(&host_info_lock, irqflags);
 			DBGMSG("arm_lock64 -> rcode_conflict_error");
 			return (RCODE_CONFLICT_ERROR);	/* A resource conflict was detected.
 							   The request may be retried */
@@ -1609,7 +1616,7 @@ static int arm_lock64(struct hpsb_host *host, int nodeid, octlet_t * store,
 			    sizeof(struct arm_response) + 2 * sizeof(*store));
 		queue_complete_req(req);
 	}
-	spin_unlock(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, irqflags);
 	return (rcode);
 }
 
@@ -1980,6 +1987,7 @@ static int write_phypacket(struct file_info *fi, struct pending_request *req)
 	struct hpsb_packet *packet = NULL;
 	int retval = 0;
 	quadlet_t data;
+	unsigned long flags;
 
 	data = be32_to_cpu((u32) req->req.sendb);
 	DBGMSG("write_phypacket called - quadlet 0x%8.8x ", data);
@@ -1990,9 +1998,9 @@ static int write_phypacket(struct file_info *fi, struct pending_request *req)
 	req->packet = packet;
 	hpsb_set_packet_complete_task(packet,
 				      (void (*)(void *))queue_complete_cb, req);
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	list_add_tail(&req->list, &fi->req_pending);
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 	packet->generation = req->req.generation;
 	retval = hpsb_send_packet(packet);
 	DBGMSG("write_phypacket send_packet called => retval: %d ", retval);
@@ -2659,14 +2667,15 @@ static unsigned int raw1394_poll(struct file *file, poll_table * pt)
 {
 	struct file_info *fi = file->private_data;
 	unsigned int mask = POLLOUT | POLLWRNORM;
+	unsigned long flags;
 
 	poll_wait(file, &fi->poll_wait_complete, pt);
 
-	spin_lock_irq(&fi->reqlists_lock);
+	spin_lock_irqsave(&fi->reqlists_lock, flags);
 	if (!list_empty(&fi->req_complete)) {
 		mask |= POLLIN | POLLRDNORM;
 	}
-	spin_unlock_irq(&fi->reqlists_lock);
+	spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 	return mask;
 }
@@ -2710,6 +2719,7 @@ static int raw1394_release(struct inode *inode, struct file *file)
 	struct arm_addr *arm_addr = NULL;
 	int another_host;
 	int csr_mod = 0;
+	unsigned long flags;
 
 	if (fi->iso_state != RAW1394_ISO_INACTIVE)
 		raw1394_iso_shutdown(fi);
@@ -2720,13 +2730,11 @@ static int raw1394_release(struct inode *inode, struct file *file)
 		}
 	}
 
-	spin_lock_irq(&host_info_lock);
+	spin_lock_irqsave(&host_info_lock, flags);
 	fi->listen_channels = 0;
-	spin_unlock_irq(&host_info_lock);
 
 	fail = 0;
 	/* set address-entries invalid */
-	spin_lock_irq(&host_info_lock);
 
 	while (!list_empty(&fi->addr_list)) {
 		another_host = 0;
@@ -2777,14 +2785,14 @@ static int raw1394_release(struct inode *inode, struct file *file)
 		vfree(addr->addr_space_buffer);
 		kfree(addr);
 	}			/* while */
-	spin_unlock_irq(&host_info_lock);
+	spin_unlock_irqrestore(&host_info_lock, flags);
 	if (fail > 0) {
 		printk(KERN_ERR "raw1394: during addr_list-release "
 		       "error(s) occurred \n");
 	}
 
 	while (!done) {
-		spin_lock_irq(&fi->reqlists_lock);
+		spin_lock_irqsave(&fi->reqlists_lock, flags);
 
 		while (!list_empty(&fi->req_complete)) {
 			lh = fi->req_complete.next;
@@ -2798,7 +2806,7 @@ static int raw1394_release(struct inode *inode, struct file *file)
 		if (list_empty(&fi->req_pending))
 			done = 1;
 
-		spin_unlock_irq(&fi->reqlists_lock);
+		spin_unlock_irqrestore(&fi->reqlists_lock, flags);
 
 		if (!done)
 			down_interruptible(&fi->complete_sem);
@@ -2828,9 +2836,9 @@ static int raw1394_release(struct inode *inode, struct file *file)
 		     fi->host->id);
 
 	if (fi->state == connected) {
-		spin_lock_irq(&host_info_lock);
+		spin_lock_irqsave(&host_info_lock, flags);
 		list_del(&fi->list);
-		spin_unlock_irq(&host_info_lock);
+		spin_unlock_irqrestore(&host_info_lock, flags);
 
 		put_device(&fi->host->device);
 	}

drivers/input/keyboard/Kconfig

@@ -93,7 +93,7 @@ config KEYBOARD_LKKBD
 
 config KEYBOARD_LOCOMO
 	tristate "LoCoMo Keyboard Support"
-	depends on SHARP_LOCOMO
+	depends on SHARP_LOCOMO && INPUT_KEYBOARD
 	help
 	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 

drivers/input/keyboard/spitzkbd.c

@@ -53,7 +53,7 @@ static unsigned char spitzkbd_keycode[NR_SCANCODES] = {
 	KEY_LEFTCTRL, KEY_1, KEY_3, KEY_5, KEY_6, KEY_7, KEY_9, KEY_0, KEY_BACKSPACE, SPITZ_KEY_EXOK, SPITZ_KEY_EXCANCEL, 0, 0, 0, 0, 0,  /* 1-16 */
 	0, KEY_2, KEY_4, KEY_R, KEY_Y, KEY_8, KEY_I, KEY_O, KEY_P, SPITZ_KEY_EXJOGDOWN, SPITZ_KEY_EXJOGUP, 0, 0, 0, 0, 0, /* 17-32 */
 	KEY_TAB, KEY_Q, KEY_E, KEY_T, KEY_G, KEY_U, KEY_J, KEY_K, 0, 0, 0, 0, 0, 0, 0, 0,                                 /* 33-48 */
-	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0,         /* 49-64 */
+	SPITZ_KEY_CALENDER, KEY_W, KEY_S, KEY_F, KEY_V, KEY_H, KEY_M, KEY_L, 0, KEY_RIGHTSHIFT, 0, 0, 0, 0, 0, 0,         /* 49-64 */
 	SPITZ_KEY_ADDRESS, KEY_A, KEY_D, KEY_C, KEY_B, KEY_N, KEY_DOT, 0, KEY_ENTER, KEY_LEFTSHIFT, 0, 0, 0, 0, 0, 0,	  /* 65-80 */
 	SPITZ_KEY_MAIL, KEY_Z, KEY_X, KEY_MINUS, KEY_SPACE, KEY_COMMA, 0, KEY_UP, 0, 0, SPITZ_KEY_FN, 0, 0, 0, 0, 0,      /* 81-96 */
 	KEY_SYSRQ, SPITZ_KEY_JAP1, SPITZ_KEY_JAP2, SPITZ_KEY_CANCEL, SPITZ_KEY_OK, SPITZ_KEY_MENU, KEY_LEFT, KEY_DOWN, KEY_RIGHT, 0, 0, 0, 0, 0, 0, 0  /* 97-112 */

drivers/input/misc/uinput.c

@@ -90,11 +90,11 @@ static inline int uinput_request_reserve_slot(struct uinput_device *udev, struct
 
 static void uinput_request_done(struct uinput_device *udev, struct uinput_request *request)
 {
-	complete(&request->done);
-
 	/* Mark slot as available */
 	udev->requests[request->id] = NULL;
 	wake_up_interruptible(&udev->requests_waitq);
+
+	complete(&request->done);
 }
 
 static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request)

drivers/md/md.c

@@ -3063,6 +3063,7 @@ static int md_thread(void * arg)
 	 * many dirty RAID5 blocks.
 	 */
 
+	allow_signal(SIGKILL);
 	complete(thread->event);
 	while (!kthread_should_stop()) {
 		void (*run)(mddev_t *);
@@ -3111,7 +3112,7 @@ mdk_thread_t *md_register_thread(void (*run) (mddev_t *), mddev_t *mddev,
 	thread->mddev = mddev;
 	thread->name = name;
 	thread->timeout = MAX_SCHEDULE_TIMEOUT;
-	thread->tsk = kthread_run(md_thread, thread, mdname(thread->mddev));
+	thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev));
 	if (IS_ERR(thread->tsk)) {
 		kfree(thread);
 		return NULL;
@@ -3569,6 +3570,7 @@ static void md_do_sync(mddev_t *mddev)
 	try_again:
 		if (signal_pending(current)) {
 			flush_signals(current);
+			set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 			goto skip;
 		}
 		ITERATE_MDDEV(mddev2,tmp) {

drivers/media/radio/radio-cadet.c

@@ -543,7 +543,7 @@ static int cadet_probe(void)
 
 	for(i=0;i<8;i++) {
 	        io=iovals[i];
-	        if(request_region(io,2, "cadet-probe")>=0) {
+		if (request_region(io, 2, "cadet-probe")) {
 		        cadet_setfreq(1410);
 			if(cadet_getfreq()==1410) {
 				release_region(io, 2);

drivers/media/video/vpx3220.c

@@ -203,7 +203,7 @@ static const unsigned short init_ntsc[] = {
 	0x8c, 640,		/* Horizontal length */
 	0x8d, 640,		/* Number of pixels */
 	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x173,		/* 13.5 MHz transport, Forced
+	0xf0, 0x73,		/* 13.5 MHz transport, Forced
 				 * mode, latch windows */
 	0xf2, 0x13,		/* NTSC M, composite input */
 	0xe7, 0x1e1,		/* Enable vertical standard
@@ -212,38 +212,36 @@ static const unsigned short init_ntsc[] = {
 
 static const unsigned short init_pal[] = {
 	0x88, 23,		/* Window 1 vertical begin */
-	0x89, 288 + 16,		/* Vertical lines in (16 lines
+	0x89, 288,		/* Vertical lines in (16 lines
 				 * skipped by the VFE) */
-	0x8a, 288 + 16,		/* Vertical lines out (16 lines
+	0x8a, 288,		/* Vertical lines out (16 lines
 				 * skipped by the VFE) */
 	0x8b, 16,		/* Horizontal begin */
 	0x8c, 768,		/* Horizontal length */
 	0x8d, 784, 		/* Number of pixels
 				 * Must be >= Horizontal begin + Horizontal length */
 	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x177,		/* 13.5 MHz transport, Forced
+	0xf0, 0x77,		/* 13.5 MHz transport, Forced
 				 * mode, latch windows */
 	0xf2, 0x3d1,		/* PAL B,G,H,I, composite input */
-	0xe7, 0x261,		/* PAL/SECAM set to 288 + 16 lines 
-				 * change to 0x241 for 288 lines */
+	0xe7, 0x241,		/* PAL/SECAM set to 288 lines */
 };
 
 static const unsigned short init_secam[] = {
-	0x88, 23  - 16,		/* Window 1 vertical begin */
-	0x89, 288 + 16,		/* Vertical lines in (16 lines
+	0x88, 23,		/* Window 1 vertical begin */
+	0x89, 288,		/* Vertical lines in (16 lines
 				 * skipped by the VFE) */
-	0x8a, 288 + 16,		/* Vertical lines out (16 lines
+	0x8a, 288,		/* Vertical lines out (16 lines
 				 * skipped by the VFE) */
 	0x8b, 16,		/* Horizontal begin */
 	0x8c, 768,		/* Horizontal length */
 	0x8d, 784,		/* Number of pixels
 				 * Must be >= Horizontal begin + Horizontal length */
 	0x8f, 0xc00,		/* Disable window 2 */
-	0xf0, 0x177,		/* 13.5 MHz transport, Forced
+	0xf0, 0x77,		/* 13.5 MHz transport, Forced
 				 * mode, latch windows */
 	0xf2, 0x3d5,		/* SECAM, composite input */
-	0xe7, 0x261,		/* PAL/SECAM set to 288 + 16 lines 
-				 * change to 0x241 for 288 lines */
+	0xe7, 0x241,		/* PAL/SECAM set to 288 lines */
 };
 
 static const unsigned char init_common[] = {
@@ -410,6 +408,12 @@ vpx3220_command (struct i2c_client *client,
 	case DECODER_SET_NORM:
 	{
 		int *iarg = arg, data;
+		int temp_input;
+
+		/* Here we back up the input selection because it gets
+		   overwritten when we fill the registers with the
+                   choosen video norm */
+		temp_input = vpx3220_fp_read(client, 0xf2);
 
 		dprintk(1, KERN_DEBUG "%s: DECODER_SET_NORM %d\n",
 			I2C_NAME(client), *iarg);
@@ -449,6 +453,10 @@ vpx3220_command (struct i2c_client *client,
 
 		}
 		decoder->norm = *iarg;
+
+		/* And here we set the backed up video input again */
+		vpx3220_fp_write(client, 0xf2, temp_input | 0x0010);
+		udelay(10);
 	}
 		break;
 

drivers/message/fusion/mptsas.c

@@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
 	printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
 	printk("Target ID=0x%X\n", pg0->TargetID);
 	printk("Bus=0x%X\n", pg0->Bus);
-	printk("PhyNum=0x%X\n", pg0->PhyNum);
-	printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
+	printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
+	printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
 	printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
 	printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
 	printk("Physical Port=0x%X\n", pg0->PhysicalPort);
@@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
 	printk("---- SAS EXPANDER PAGE 1 ------------\n");
 
 	printk("Physical Port=0x%X\n", pg1->PhysicalPort);
-	printk("PHY Identifier=0x%X\n", pg1->Phy);
+	printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
 	printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
 	printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
 	printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
@@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
 	mptsas_print_expander_pg1(buffer);
 
 	/* save config data */
-	phy_info->phy_id = buffer->Phy;
+	phy_info->phy_id = buffer->PhyIdentifier;
 	phy_info->port_id = buffer->PhysicalPort;
 	phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
 	phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
@@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
 		mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
 			(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
 			 MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
+		port_info->phy_info[i].identify.phy_id =
+		    port_info->phy_info[i].phy_id;
 		handle = port_info->phy_info[i].identify.handle;
 
 		if (port_info->phy_info[i].attached.handle) {
@@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
 				(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
 				 MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
 				port_info->phy_info[i].identify.handle);
+			port_info->phy_info[i].identify.phy_id =
+			    port_info->phy_info[i].phy_id;
 		}
 
 		if (port_info->phy_info[i].attached.handle) {

drivers/net/e100.c

@@ -903,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
 
 static void e100_get_defaults(struct nic *nic)
 {
-	struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
-	struct param_range cbs  = { .min = 64, .max = 256, .count = 128 };
+	struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
+	struct param_range cbs  = { .min = 64, .max = 256, .count = 64 };
 
 	pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
 	/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1007,213 +1007,25 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
 }
 
-/********************************************************/
-/*  Micro code for 8086:1229 Rev 8                      */
-/********************************************************/
-
-/*  Parameter values for the D101M B-step  */
-#define D101M_CPUSAVER_TIMER_DWORD		78
-#define D101M_CPUSAVER_BUNDLE_DWORD		65
-#define D101M_CPUSAVER_MIN_SIZE_DWORD		126
-
-#define D101M_B_RCVBUNDLE_UCODE \
-{\
-0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
-0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
-0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
-0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
-0x00380438, 0x00000000, 0x00140000, 0x00380555, \
-0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
-0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
-0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
-0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
-0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
-0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
-0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
-0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
-0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
-0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
-0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
-0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
-0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
-0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
-0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
-0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
-0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
-0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
-0x00380559, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
-0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
-0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
-}
-
-/********************************************************/
-/*  Micro code for 8086:1229 Rev 9                      */
-/********************************************************/
-
-/*  Parameter values for the D101S  */
-#define D101S_CPUSAVER_TIMER_DWORD		78
-#define D101S_CPUSAVER_BUNDLE_DWORD		67
-#define D101S_CPUSAVER_MIN_SIZE_DWORD		128
-
-#define D101S_RCVBUNDLE_UCODE \
-{\
-0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
-0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
-0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
-0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
-0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
-0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
-0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
-0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
-0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
-0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
-0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
-0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
-0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
-0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
-0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
-0x00101313, 0x00380700, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
-0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
-0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
-0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
-0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
-0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
-0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
-0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
-0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
-0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00130831, \
-0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
-0x00041000, 0x00010004, 0x00380700  \
-}
-
-/********************************************************/
-/*  Micro code for the 8086:1229 Rev F/10               */
-/********************************************************/
-
-/*  Parameter values for the D102 E-step  */
-#define D102_E_CPUSAVER_TIMER_DWORD		42
-#define D102_E_CPUSAVER_BUNDLE_DWORD		54
-#define D102_E_CPUSAVER_MIN_SIZE_DWORD		46
-
-#define     D102_E_RCVBUNDLE_UCODE \
-{\
-0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
-0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
-0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
-0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
-0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
-0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
-0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-0x00000000, 0x00000000, 0x00000000, 0x00000000, \
-}
-
 static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
-/* *INDENT-OFF* */
-	static struct {
-		u32 ucode[UCODE_SIZE + 1];
-		u8 mac;
-		u8 timer_dword;
-		u8 bundle_dword;
-		u8 min_size_dword;
-	} ucode_opts[] = {
-		{ D101M_B_RCVBUNDLE_UCODE,
-		  mac_82559_D101M,
-		  D101M_CPUSAVER_TIMER_DWORD,
-		  D101M_CPUSAVER_BUNDLE_DWORD,
-		  D101M_CPUSAVER_MIN_SIZE_DWORD },
-		{ D101S_RCVBUNDLE_UCODE,
-		  mac_82559_D101S,
-		  D101S_CPUSAVER_TIMER_DWORD,
-		  D101S_CPUSAVER_BUNDLE_DWORD,
-		  D101S_CPUSAVER_MIN_SIZE_DWORD },
-		{ D102_E_RCVBUNDLE_UCODE,
-		  mac_82551_F,
-		  D102_E_CPUSAVER_TIMER_DWORD,
-		  D102_E_CPUSAVER_BUNDLE_DWORD,
-		  D102_E_CPUSAVER_MIN_SIZE_DWORD },
-		{ D102_E_RCVBUNDLE_UCODE,
-		  mac_82551_10,
-		  D102_E_CPUSAVER_TIMER_DWORD,
-		  D102_E_CPUSAVER_BUNDLE_DWORD,
-		  D102_E_CPUSAVER_MIN_SIZE_DWORD },
-		{ {0}, 0, 0, 0, 0}
-	}, *opts;
-/* *INDENT-ON* */
-
-#define BUNDLESMALL 1
-#define BUNDLEMAX 50
-#define INTDELAY 15000
-
-	opts = ucode_opts;
-
-	/* do not load u-code for ICH devices */
-	if (nic->flags & ich)
-		return;
-
-	/* Search for ucode match against h/w rev_id */
-	while (opts->mac) {
-		if (nic->mac == opts->mac) {
-			int i;
-			u32 *ucode = opts->ucode;
-
-			/* Insert user-tunable settings */
-			ucode[opts->timer_dword] &= 0xFFFF0000;
-			ucode[opts->timer_dword] |=
-				(u16) INTDELAY;
-			ucode[opts->bundle_dword] &= 0xFFFF0000;
-			ucode[opts->bundle_dword] |= (u16) BUNDLEMAX;
-			ucode[opts->min_size_dword] &= 0xFFFF0000;
-			ucode[opts->min_size_dword] |=
-				(BUNDLESMALL) ?  0xFFFF : 0xFF80;
-
-			for(i = 0; i < UCODE_SIZE; i++)
-				cb->u.ucode[i] = cpu_to_le32(ucode[i]);
-			cb->command = cpu_to_le16(cb_ucode);
-			return;
-		}
-		opts++;
-	}
+	int i;
+	static const u32 ucode[UCODE_SIZE] = {
+		/* NFS packets are misinterpreted as TCO packets and
+		 * incorrectly routed to the BMC over SMBus.  This
+		 * microcode patch checks the fragmented IP bit in the
+		 * NFS/UDP header to distinguish between NFS and TCO. */
+		0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
+		0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
+		0x00906EFD, 0x00900EFD,	0x00E00EF8,
+	};
 
-	cb->command = cpu_to_le16(cb_nop);
+	if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
+		for(i = 0; i < UCODE_SIZE; i++)
+			cb->u.ucode[i] = cpu_to_le32(ucode[i]);
+		cb->command = cpu_to_le16(cb_ucode);
+	} else
+		cb->command = cpu_to_le16(cb_nop);
 }
 
 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,

drivers/net/wireless/Kconfig

@@ -243,7 +243,7 @@ config IPW_DEBUG
 
 config AIRO
 	tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
-	depends on NET_RADIO && ISA && (PCI || BROKEN)
+	depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet ISA and
 	  PCI 802.11 wireless cards.

drivers/net/wireless/orinoco.c

@@ -578,8 +578,9 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
 				txfid, NULL);
 	if (err) {
 		netif_start_queue(dev);
-		printk(KERN_ERR "%s: Error %d transmitting packet\n",
-		       dev->name, err);
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: Error %d transmitting packet\n",
+				dev->name, err);
 		stats->tx_errors++;
 		goto fail;
 	}

drivers/pci/.gitignore

@@ -0,0 +1,4 @@
+classlist.h
+devlist.h
+gen-devlist
+

drivers/pci/quirks.c

@@ -1233,7 +1233,7 @@ static void __init quirk_alder_ioapic(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_EESSC,	quirk_alder_ioapic );
 #endif
 
-#ifdef CONFIG_SCSI_SATA
+#ifdef CONFIG_SCSI_SATA_INTEL_COMBINED
 static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
 {
 	u8 prog, comb, tmp;
@@ -1310,7 +1310,7 @@ static void __devinit quirk_intel_ide_combined(struct pci_dev *pdev)
 		request_region(0x170, 8, "libata");	/* port 1 */
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,    PCI_ANY_ID,	  quirk_intel_ide_combined );
-#endif /* CONFIG_SCSI_SATA */
+#endif /* CONFIG_SCSI_SATA_INTEL_COMBINED */
 
 
 int pcie_mch_quirk;

drivers/pcmcia/soc_common.c

@@ -66,7 +66,7 @@ void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func,
 	if (pc_debug > lvl) {
 		printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func);
 		va_start(args, fmt);
-		printk(fmt, args);
+		vprintk(fmt, args);
 		va_end(args);
 	}
 }
@@ -321,8 +321,6 @@ soc_common_pcmcia_get_socket(struct pcmcia_socket *sock, socket_state_t *state)
  * less punt all of this work and let the kernel handle the details
  * of power configuration, reset, &c. We also record the value of
  * `state' in order to regurgitate it to the PCMCIA core later.
- *
- * Returns: 0
  */
 static int
 soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
@@ -407,7 +405,7 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
  * the map speed as requested, but override the address ranges
  * supplied by Card Services.
  *
- * Returns: 0 on success, -1 on error
+ * Returns: 0 on success, -ERRNO on error
  */
 static int
 soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
@@ -655,8 +653,8 @@ static void soc_pcmcia_cpufreq_unregister(void)
 }
 
 #else
-#define soc_pcmcia_cpufreq_register()
-#define soc_pcmcia_cpufreq_unregister()
+static int soc_pcmcia_cpufreq_register(void) { return 0; }
+static void soc_pcmcia_cpufreq_unregister(void) {}
 #endif
 
 int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr)
@@ -738,7 +736,7 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops
 			goto out_err_5;
 		}
 
-		if ( list_empty(&soc_pcmcia_sockets) )
+		if (list_empty(&soc_pcmcia_sockets))
 			soc_pcmcia_cpufreq_register();
 
 		list_add(&skt->node, &soc_pcmcia_sockets);
@@ -839,7 +837,7 @@ int soc_common_drv_pcmcia_remove(struct device *dev)
 		release_resource(&skt->res_io);
 		release_resource(&skt->res_skt);
 	}
-	if ( list_empty(&soc_pcmcia_sockets) )
+	if (list_empty(&soc_pcmcia_sockets))
 		soc_pcmcia_cpufreq_unregister();
 
 	up(&soc_pcmcia_sockets_lock);

drivers/scsi/Kconfig

@@ -553,6 +553,11 @@ config SCSI_SATA_VITESSE
 
 	  If unsure, say N.
 
+config SCSI_SATA_INTEL_COMBINED
+	bool
+	depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
+	default y
+
 config SCSI_BUSLOGIC
 	tristate "BusLogic SCSI support"
 	depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API

drivers/scsi/aacraid/linit.c

@@ -453,9 +453,9 @@ static int aac_eh_reset(struct scsi_cmnd* cmd)
 		/*
 		 * We can exit If all the commands are complete
 		 */
+		spin_unlock_irq(host->host_lock);
 		if (active == 0)
 			return SUCCESS;
-		spin_unlock_irq(host->host_lock);
 		ssleep(1);
 		spin_lock_irq(host->host_lock);
 	}

drivers/scsi/qlogicpti.c

@@ -1119,6 +1119,36 @@ static inline void update_can_queue(struct Scsi_Host *host, u_int in_ptr, u_int
 	host->sg_tablesize = QLOGICPTI_MAX_SG(num_free);
 }
 
+static unsigned int scsi_rbuf_get(struct scsi_cmnd *cmd, unsigned char **buf_out)
+{
+	unsigned char *buf;
+	unsigned int buflen;
+
+	if (cmd->use_sg) {
+		struct scatterlist *sg;
+
+		sg = (struct scatterlist *) cmd->request_buffer;
+		buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
+		buflen = sg->length;
+	} else {
+		buf = cmd->request_buffer;
+		buflen = cmd->request_bufflen;
+	}
+
+	*buf_out = buf;
+	return buflen;
+}
+
+static void scsi_rbuf_put(struct scsi_cmnd *cmd, unsigned char *buf)
+{
+	if (cmd->use_sg) {
+		struct scatterlist *sg;
+
+		sg = (struct scatterlist *) cmd->request_buffer;
+		kunmap_atomic(buf - sg->offset, KM_IRQ0);
+	}
+}
+
 /*
  * Until we scan the entire bus with inquiries, go throught this fella...
  */
@@ -1145,11 +1175,9 @@ static void ourdone(struct scsi_cmnd *Cmnd)
 		int ok = host_byte(Cmnd->result) == DID_OK;
 		if (Cmnd->cmnd[0] == 0x12 && ok) {
 			unsigned char *iqd;
+			unsigned int iqd_len;
 
-			if (Cmnd->use_sg != 0)
-				BUG();
-
-			iqd = ((unsigned char *)Cmnd->buffer);
+			iqd_len = scsi_rbuf_get(Cmnd, &iqd);
 
 			/* tags handled in midlayer */
 			/* enable sync mode? */
@@ -1163,6 +1191,9 @@ static void ourdone(struct scsi_cmnd *Cmnd)
 			if (iqd[7] & 0x20) {
 				qpti->dev_param[tgt].device_flags |= 0x20;
 			}
+
+			scsi_rbuf_put(Cmnd, iqd);
+
 			qpti->sbits |= (1 << tgt);
 		} else if (!ok) {
 			qpti->sbits |= (1 << tgt);

drivers/scsi/sata_nv.c

@@ -29,6 +29,8 @@
  *  NV-specific details such as register offsets, SATA phy location,
  *  hotplug info, etc.
  *
+ *  0.09
+ *     - Fixed bug introduced by 0.08's MCP51 and MCP55 support.
  *
  *  0.08
  *     - Added support for MCP51 and MCP55.
@@ -132,9 +134,7 @@ enum nv_host_type
 	GENERIC,
 	NFORCE2,
 	NFORCE3,
-	CK804,
-	MCP51,
-	MCP55
+	CK804
 };
 
 static struct pci_device_id nv_pci_tbl[] = {
@@ -153,13 +153,13 @@ static struct pci_device_id nv_pci_tbl[] = {
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 },
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 },
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 },
+		PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC },
 	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
 		PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },

drivers/scsi/scsi_error.c

@@ -1645,6 +1645,8 @@ int scsi_error_handler(void *data)
 		set_current_state(TASK_INTERRUPTIBLE);
 	}
 
+	__set_current_state(TASK_RUNNING);
+
 	SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler scsi_eh_%d"
 					  " exiting\n",shost->host_no));
 

drivers/serial/8250_pnp.c

@@ -272,8 +272,12 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{	"SUP1421",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
 	{	"SUP1590",		0	},
+	/* SupraExpress 336i Sp ASVD */
+	{	"SUP1620",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
 	{	"SUP1760",		0	},
+	/* SupraExpress 56i Sp Intl */
+	{	"SUP2171",		0	},
 	/* Phoebe Micro */
 	/* Phoebe Micro 33.6 Data Fax 1433VQH Plug & Play */
 	{	"TEX0011",		0	},

drivers/serial/imx.c

@@ -73,7 +73,7 @@ struct imx_port {
 	struct uart_port	port;
 	struct timer_list	timer;
 	unsigned int		old_status;
-	int txirq,rxirq;
+	int txirq,rxirq,rtsirq;
 };
 
 /*
@@ -181,6 +181,22 @@ static void imx_start_tx(struct uart_port *port)
 		imx_transmit_buffer(sport);
 }
 
+static irqreturn_t imx_rtsint(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct imx_port *sport = (struct imx_port *)dev_id;
+	unsigned int val = USR1((u32)sport->port.membase)&USR1_RTSS;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sport->port.lock, flags);
+
+	USR1((u32)sport->port.membase) = USR1_RTSD;
+	uart_handle_cts_change(&sport->port, !!val);
+	wake_up_interruptible(&sport->port.info->delta_msr_wait);
+
+	spin_unlock_irqrestore(&sport->port.lock, flags);
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t imx_txint(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct imx_port *sport = (struct imx_port *)dev_id;
@@ -386,15 +402,21 @@ static int imx_startup(struct uart_port *port)
 	if (retval) goto error_out1;
 
 	retval = request_irq(sport->txirq, imx_txint, 0,
-			     "imx-uart", sport);
+			     DRIVER_NAME, sport);
 	if (retval) goto error_out2;
 
+	retval = request_irq(sport->rtsirq, imx_rtsint, 0,
+			     DRIVER_NAME, sport);
+	if (retval) goto error_out3;
+	set_irq_type(sport->rtsirq, IRQT_BOTHEDGE);
+
 	/*
 	 * Finally, clear and enable interrupts
 	 */
 
+	USR1((u32)sport->port.membase) = USR1_RTSD;
 	UCR1((u32)sport->port.membase) |=
-	                 (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN);
+	                 (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
 
 	UCR2((u32)sport->port.membase) |= (UCR2_RXEN | UCR2_TXEN);
 	/*
@@ -406,6 +428,8 @@ static int imx_startup(struct uart_port *port)
 
 	return 0;
 
+error_out3:
+	free_irq(sport->txirq, sport);
 error_out2:
 	free_irq(sport->rxirq, sport);
 error_out1:
@@ -424,6 +448,7 @@ static void imx_shutdown(struct uart_port *port)
 	/*
 	 * Free the interrupts
 	 */
+	free_irq(sport->rtsirq, sport);
 	free_irq(sport->txirq, sport);
 	free_irq(sport->rxirq, sport);
 
@@ -432,7 +457,7 @@ static void imx_shutdown(struct uart_port *port)
 	 */
 
 	UCR1((u32)sport->port.membase) &=
-	                 ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN);
+	                 ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN);
 }
 
 static void
@@ -522,7 +547,7 @@ imx_set_termios(struct uart_port *port, struct termios *termios,
 	 * disable interrupts and drain transmitter
 	 */
 	old_ucr1 = UCR1((u32)sport->port.membase);
-	UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN);
+	UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
 
 	while ( !(USR2((u32)sport->port.membase) & USR2_TXDC))
 		barrier();
@@ -643,6 +668,7 @@ static struct imx_port imx_ports[] = {
 	{
 	.txirq  = UART1_MINT_TX,
 	.rxirq  = UART1_MINT_RX,
+	.rtsirq = UART1_MINT_RTS,
 	.port	= {
 		.type		= PORT_IMX,
 		.iotype		= SERIAL_IO_MEM,
@@ -658,6 +684,7 @@ static struct imx_port imx_ports[] = {
 	}, {
 	.txirq  = UART2_MINT_TX,
 	.rxirq  = UART2_MINT_RX,
+	.rtsirq = UART2_MINT_RTS,
 	.port	= {
 		.type		= PORT_IMX,
 		.iotype		= SERIAL_IO_MEM,
@@ -737,7 +764,7 @@ imx_console_write(struct console *co, const char *s, unsigned int count)
 
 	UCR1((u32)sport->port.membase) =
 	                   (old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN)
-	                   & ~(UCR1_TXMPTYEN | UCR1_RRDYEN);
+	                   & ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN);
 	UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN;
 
 	/*

drivers/serial/pxa.c

@@ -499,7 +499,7 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
 	/*
 	 * Update the per-port timeout.
 	 */
-	uart_update_timeout(port, termios->c_cflag, quot);
+	uart_update_timeout(port, termios->c_cflag, baud);
 
 	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
 	if (termios->c_iflag & INPCK)

drivers/serial/s3c2410.c

@@ -1092,8 +1092,8 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 static int probe_index = 0;
 
-int s3c24xx_serial_probe(struct device *_dev,
-			 struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_probe(struct device *_dev,
+				struct s3c24xx_uart_info *info)
 {
 	struct s3c24xx_uart_port *ourport;
 	struct platform_device *dev = to_platform_device(_dev);
@@ -1120,7 +1120,7 @@ int s3c24xx_serial_probe(struct device *_dev,
 	return ret;
 }
 
-int s3c24xx_serial_remove(struct device *_dev)
+static int s3c24xx_serial_remove(struct device *_dev)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(_dev);
 
@@ -1134,7 +1134,8 @@ int s3c24xx_serial_remove(struct device *_dev)
 
 #ifdef CONFIG_PM
 
-int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, u32 level)
+static int s3c24xx_serial_suspend(struct device *dev, pm_message_t state,
+				  u32 level)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(dev);
 
@@ -1144,7 +1145,7 @@ int s3c24xx_serial_suspend(struct device *dev, pm_message_t state, u32 level)
 	return 0;
 }
 
-int s3c24xx_serial_resume(struct device *dev, u32 level)
+static int s3c24xx_serial_resume(struct device *dev, u32 level)
 {
 	struct uart_port *port = s3c24xx_dev_to_port(dev);
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
@@ -1165,8 +1166,8 @@ int s3c24xx_serial_resume(struct device *dev, u32 level)
 #define s3c24xx_serial_resume  NULL
 #endif
 
-int s3c24xx_serial_init(struct device_driver *drv,
-			struct s3c24xx_uart_info *info)
+static int s3c24xx_serial_init(struct device_driver *drv,
+			       struct s3c24xx_uart_info *info)
 {
 	dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
 	return driver_register(drv);

drivers/serial/sh-sci.c

@@ -967,7 +967,7 @@ static int sci_startup(struct uart_port *port)
 #endif
 
 	sci_request_irq(s);
-	sci_start_tx(port, 1);
+	sci_start_tx(port);
 	sci_start_rx(port, 1);
 
 	return 0;

drivers/usb/host/isp116x-hcd.c

@@ -326,7 +326,8 @@ static void postproc_atl_queue(struct isp116x *isp116x)
 					usb_settoggle(udev, ep->epnum,
 						      ep->nextpid ==
 						      USB_PID_OUT,
-						      PTD_GET_TOGGLE(ptd) ^ 1);
+						      PTD_GET_TOGGLE(ptd));
+				urb->actual_length += PTD_GET_COUNT(ptd);
 				urb->status = cc_to_error[TD_DATAUNDERRUN];
 				spin_unlock(&urb->lock);
 				continue;