Merge branch 'master' into upstream

arch/arm/mach-ixp4xx/nslu2-pci.c

@@ -17,6 +17,7 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>

arch/arm/mach-ixp4xx/nslu2-power.c

@@ -19,6 +19,7 @@
 
 #include <linux/module.h>
 #include <linux/reboot.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 

arch/arm/mach-s3c2410/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 
 # S3C2412 support
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
 
 #

arch/arm/mach-s3c2410/cpu.h

@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     24-Aug-2004 BJD  Start of generic S3C24XX support
- *     18-Oct-2004 BJD  Moved board struct into this file
- *     04-Jan-2005 BJD  New uart initialisation
- *     10-Jan-2005 BJD  Moved generic init here, specific to cpu headers
- *     14-Jan-2005 BJD  Added s3c24xx_init_clocks() call
- *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
- *     14-Mar-2005 BJD  Updated for __iomem
- *     15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
 */
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */

arch/arm/mach-s3c2410/devs.c

@@ -1,22 +1,14 @@
 /* linux/arch/arm/mach-s3c2410/devs.c
  *
  * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ *	Ben Dooks <ben@simtec.co.uk>
  *
- * Base S3C2410 platform device definitions
+ * Base S3C24XX platform device definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
- *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
- *     10-Feb-2005 BJD  Added camera from guillaume.gourat@nexvision.tv
- *     29-Aug-2004 BJD  Added timers 0 through 3
- *     29-Aug-2004 BJD  Changed index of devices we only have one of to -1
- *     21-Aug-2004 BJD  Added IRQ_TICK to RTC resources
- *     18-Aug-2004 BJD  Created initial version
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/irq.c

@@ -86,7 +86,7 @@ unsigned long s3c_irqwake_intmask	= 0xffffffffL;
 unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
 unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
 
-static int
+int
 s3c_irq_wake(unsigned int irqno, unsigned int state)
 {
 	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
@@ -260,7 +260,7 @@ s3c_irqext_unmask(unsigned int irqno)
 	s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23);
 }
 
-static int
+int
 s3c_irqext_type(unsigned int irq, unsigned int type)
 {
 	void __iomem *extint_reg;

arch/arm/mach-s3c2410/irq.h

@@ -97,3 +97,8 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
 		__raw_writel(parentmask, S3C2410_INTPND);
 	}
 }
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);

arch/arm/mach-s3c2410/mach-bast.c

@@ -8,31 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     14-Sep-2004 BJD  USB power control
- *     20-Aug-2004 BJD  Added s3c2410_board struct
- *     18-Aug-2004 BJD  Added platform devices from default set
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to v2.6 kernel
- *     06-Jan-2003 BJD  Updates for <arch/map.h>
- *     18-Jan-2003 BJD  Added serial port configuration
- *     05-Oct-2004 BJD  Power management code
- *     04-Nov-2004 BJD  Updated serial port clocks
- *     04-Jan-2005 BJD  New uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Add support for muitlple NAND devices
- *     03-Mar-2005 BJD  Ensured that bast-cpld.h is included
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2005 BJD  Updated for __iomem changes
- *     22-Jun-2005 BJD  Added DM9000 platform information
- *     28-Jun-2005 BJD  Moved pm functionality out to common code
- *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
- *     25-Jul-2005 BJD  Removed ASIX static mappings
- *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     26-Oct-2005 BJD  Added FB platform data
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-h1940.c

@@ -9,23 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to v2.6 kernel
- *     06-Jan-2003 BJD  Updates for <arch/map.h>
- *     18-Jan-2003 BJD  Added serial port configuration
- *     17-Feb-2003 BJD  Copied to mach-ipaq.c
- *     21-Aug-2004 BJD  Added struct s3c2410_board
- *     04-Sep-2004 BJD  Changed uart init, renamed ipaq_ -> h1940_
- *     18-Oct-2004 BJD  Updated new board structure name
- *     04-Nov-2004 BJD  Change for new serial clock
- *     04-Jan-2005 BJD  Updated uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Added clock init
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     26-Oct-2005 BJD  Changed name of fb init call
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-rx3715.c

@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *	16-Sep-2004 BJD  Copied from mach-h1940.c
- *	25-Oct-2004 BJD  Updates for 2.6.10-rc1
- *	10-Jan-2005 BJD  Removed include of s3c2410.h s3c2440.h
- *	14-Jan-2005 BJD  Added new clock init
- *	10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *	14-Mar-2005 BJD  Fixed __iomem warnings
- *	20-Sep-2005 BJD  Added static to non-exported items
- *	31-Oct-2005 BJD  Added LCD setup for framebuffer
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -27,10 +27,6 @@
  * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
  * Ben Dooks <ben@simtec.co.uk>
  *
- * 10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
- * 20-Sep-2005 BJD   Added static to non-exported items
- * 01-Apr-2006 BJD   Moved init code to common smdk
- *
  ***********************************************************************/
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-smdk2413.c

@@ -112,7 +112,20 @@ static void __init smdk2413_machine_init(void)
 	smdk_machine_init();
 }
 
-MACHINE_START(S3C2413, "SMDK2413")
+MACHINE_START(S3C2413, "S3C2413")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -10,25 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     14-Sep-2004 BJD  USB Power control
- *     04-Sep-2004 BJD  Added new uart init, and io init
- *     21-Aug-2004 BJD  Added struct s3c2410_board
- *     06-Aug-2004 BJD  Fixed call to time initialisation
- *     05-Apr-2004 BJD  Copied to make mach-vr1000.c
- *     18-Oct-2004 BJD  Updated board struct
- *     04-Nov-2004 BJD  Clock and serial configuration update
- *
- *     04-Jan-2005 BJD  Updated uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Added clock init
- *     15-Jan-2005 BJD  Add serial port device definition
- *     20-Jan-2005 BJD  Use UPF_IOREMAP for ports
- *     10-Feb-2005 BJD  Added power-off capability
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2006 BJD  void __iomem fixes
- *     22-Jun-2006 BJD  Added DM9000 platform information
- *     20-Sep-2005 BJD  Added static to non-exported items
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/s3c2400-gpio.c

@@ -17,10 +17,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog
- *	15-Jan-2006  LCVR  Splitted from gpio.c, adding support for the S3C2400
- */
+*/
 
 #include <linux/kernel.h>
 #include <linux/init.h>

arch/arm/mach-s3c2410/s3c2410.h

@@ -9,14 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     18-Aug-2004 BJD  Created initial version
- *     20-Aug-2004 BJD  Added s3c2410_board struct
- *     04-Sep-2004 BJD  Added s3c2410_init_uarts() call
- *     17-Oct-2004 BJD  Moved board out to cpu
- *     04-Jan-2005 BJD  Changed uart init
- *     10-Jan-2005 BJD  Removed timer to cpu.h, moved 2410 specific bits here
- *     14-Jan-2005 BJD  Added s3c2410_init_clocks call
 */
 
 #ifdef CONFIG_CPU_S3C2410

arch/arm/mach-s3c2410/s3c2412-irq.c

@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "irq.h"
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask | bitval, S3C2410_INTMSK);
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+	__raw_writel(bitval, S3C2412_EINTPEND);
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask|bitval, S3C2410_INTMSK);
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+	__raw_writel(bitval, S3C2412_EINTPEND);
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irqchip s3c2412_irq_eint0t4 = {
+	.ack	   = s3c2412_irq_ack,
+	.mask	   = s3c2412_irq_mask,
+	.unmask	   = s3c2412_irq_unmask,
+	.set_wake  = s3c_irq_wake,
+	.set_type  = s3c_irqext_type,
+};
+
+static int s3c2412_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+		set_irq_chip(irqno, &s3c2412_irq_eint0t4);
+		set_irq_handler(irqno, do_edge_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2412_irq_driver = {
+	.add		= s3c2412_irq_add,
+};
+
+static int s3c2412_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+}
+
+arch_initcall(s3c2412_irq_init);

arch/arm/mach-s3c2410/s3c2440-irq.c

@@ -17,9 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *	25-Jul-2005 BJD		Split from irq.c
- *
 */
 
 #include <linux/init.h>

arch/arm/mach-s3c2410/s3c244x-irq.c

@@ -17,9 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *	25-Jul-2005 BJD		Split from irq.c
- *
 */
 
 #include <linux/init.h>
@@ -122,21 +119,24 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c244x_irq_driver = {
+static struct sysdev_driver s3c2440_irq_driver = {
 	.add	= s3c244x_irq_add,
 };
 
 static int s3c2440_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c244x_irq_driver);
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
 }
 
 arch_initcall(s3c2440_irq_init);
 
+static struct sysdev_driver s3c2442_irq_driver = {
+	.add	= s3c244x_irq_add,
+};
 
 static int s3c2442_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c244x_irq_driver);
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
 }
 
 arch_initcall(s3c2442_irq_init);

arch/arm/mm/proc-arm926.S

@@ -480,7 +480,7 @@ __arm926_proc_info:
 	b	__arm926_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
 	.long	cpu_arm926_name
 	.long	arm926_processor_functions
 	.long	v4wbi_tlb_fns

arch/frv/Kconfig

@@ -29,6 +29,10 @@ config GENERIC_HARDIRQS
 	bool
 	default n
 
+config GENERIC_TIME
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	default y

arch/frv/kernel/time.c

@@ -32,8 +32,6 @@
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-extern unsigned long wall_jiffies;
-
 unsigned long __nongprelbss __clkin_clock_speed_HZ;
 unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
 unsigned long __nongprelbss __res_bus_clock_speed_HZ;
@@ -144,85 +142,6 @@ void time_init(void)
 	time_divisor_init();
 }
 
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick;
-
-	do {
-		unsigned long lost;
-
-		seq = read_seqbegin(&xtime_lock);
-
-		usec = 0;
-		lost = jiffies - wall_jiffies;
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0)) {
-			max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
-			usec = min(usec, max_ntp_tick);
-
-			if (lost)
-				usec += lost * max_ntp_tick;
-		}
-		else if (unlikely(lost))
-			usec += lost * (USEC_PER_SEC / HZ);
-
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry(&xtime_lock, seq));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= 0 * NSEC_PER_USEC;
-	nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */

arch/i386/kernel/audit.c

@@ -8,13 +8,41 @@ static unsigned dir_class[] = {
 ~0U
 };
 
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
 static unsigned chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
 static int __init audit_classes_init(void)
 {
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
 	return 0;

arch/ia64/ia32/audit.c

@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
+
+unsigned ia32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ia32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ia32_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/ia64/kernel/audit.c

@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
 ~0U
 };
 
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
 static unsigned chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	extern int ia32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_I386)
+		return ia32_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
 static int __init audit_classes_init(void)
 {
 #ifdef CONFIG_IA32_SUPPORT
 	extern __u32 ia32_dir_class[];
+	extern __u32 ia32_write_class[];
+	extern __u32 ia32_read_class[];
 	extern __u32 ia32_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
 #endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
 	return 0;

arch/ia64/kernel/entry.S

@@ -1605,8 +1605,8 @@ sys_call_table:
 	data8 sys_ni_syscall			// 1295 reserved for ppoll
 	data8 sys_unshare
 	data8 sys_splice
-	data8 sys_set_robust_list
-	data8 sys_get_robust_list
+	data8 sys_ni_syscall			// reserved for set_robust_list
+	data8 sys_ni_syscall			// reserved for get_robust_list
 	data8 sys_sync_file_range		// 1300
 	data8 sys_tee
 	data8 sys_vmsplice

arch/ia64/kernel/head.S

@@ -197,6 +197,11 @@ start_ap:
 	;;
 	srlz.i
 	;;
+ {
+	flushrs				// must be first insn in group
+	srlz.i
+ }
+	;;
 	/*
 	 * Save the region registers, predicate before they get clobbered
 	 */

arch/ia64/kernel/perfmon.c

@@ -4936,13 +4936,15 @@ abort_locked:
 	if (likely(ctx)) {
 		DPRINT(("context unlocked\n"));
 		UNPROTECT_CTX(ctx, flags);
-		fput(file);
 	}
 
 	/* copy argument back to user, if needed */
 	if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
 
 error_args:
+	if (file)
+		fput(file);
+
 	kfree(args_k);
 
 	DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret));

arch/ia64/kernel/sys_ia64.c

@@ -163,10 +163,25 @@ sys_pipe (void)
 	return retval;
 }
 
+int ia64_mmap_check(unsigned long addr, unsigned long len,
+		unsigned long flags)
+{
+	unsigned long roff;
+
+	/*
+	 * Don't permit mappings into unmapped space, the virtual page table
+	 * of a region, or across a region boundary.  Note: RGN_MAP_LIMIT is
+	 * equal to 2^n-PAGE_SIZE (for some integer n <= 61) and len > 0.
+	 */
+	roff = REGION_OFFSET(addr);
+	if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len)))
+		return -EINVAL;
+	return 0;
+}
+
 static inline unsigned long
 do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff)
 {
-	unsigned long roff;
 	struct file *file = NULL;
 
 	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
@@ -188,17 +203,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un
 		goto out;
 	}
 
-	/*
-	 * Don't permit mappings into unmapped space, the virtual page table of a region,
-	 * or across a region boundary.  Note: RGN_MAP_LIMIT is equal to 2^n-PAGE_SIZE
-	 * (for some integer n <= 61) and len > 0.
-	 */
-	roff = REGION_OFFSET(addr);
-	if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len))) {
-		addr = -EINVAL;
-		goto out;
-	}
-
 	down_write(&current->mm->mmap_sem);
 	addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
 	up_write(&current->mm->mmap_sem);

arch/ia64/sn/kernel/setup.c

@@ -565,7 +565,7 @@ static void __init sn_init_pdas(char **cmdline_p)
  * Also sets up a few fields in the nodepda.  Also known as
  * platform_cpu_init() by the ia64 machvec code.
  */
-void __init sn_cpu_init(void)
+void __cpuinit sn_cpu_init(void)
 {
 	int cpuid;
 	int cpuphyid;

arch/powerpc/kernel/Makefile

@@ -70,6 +70,8 @@ obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y)
 kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
 kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
+obj-$(CONFIG_AUDIT)		+= audit.o
+obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s

arch/powerpc/kernel/audit.c

@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_PPC64
+	extern int ppc32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_PPC)
+		return ppc32_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_PPC64
+	extern __u32 ppc32_dir_class[];
+	extern __u32 ppc32_write_class[];
+	extern __u32 ppc32_read_class[];
+	extern __u32 ppc32_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class);
+#endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);

arch/powerpc/kernel/compat_audit.c

@@ -0,0 +1,38 @@
+#undef __powerpc64__
+#include <asm/unistd.h>
+
+unsigned ppc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned ppc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned ppc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ppc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ppc32_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/s390/kernel/Makefile

@@ -16,9 +16,11 @@ extra-y				+= head.o init_task.o vmlinux.lds
 obj-$(CONFIG_MODULES)		+= s390_ksyms.o module.o
 obj-$(CONFIG_SMP)		+= smp.o
 
+obj-$(CONFIG_AUDIT)		+= audit.o
+compat-obj-$(CONFIG_AUDIT)	+= compat_audit.o
 obj-$(CONFIG_COMPAT)		+= compat_linux.o compat_signal.o \
 					compat_wrapper.o compat_exec_domain.o \
-					binfmt_elf32.o
+					binfmt_elf32.o $(compat-obj-y)
 
 obj-$(CONFIG_VIRT_TIMER)	+= vtime.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o

arch/s390/kernel/audit.c

@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_COMPAT
+	extern int s390_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_S390)
+		return s390_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_COMPAT
+	extern __u32 s390_dir_class[];
+	extern __u32 s390_write_class[];
+	extern __u32 s390_read_class[];
+	extern __u32 s390_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, s390_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, s390_read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, s390_dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR_32, s390_chattr_class);
+#endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);

arch/s390/kernel/compat_audit.c

@@ -0,0 +1,38 @@
+#undef __s390x__
+#include <asm/unistd.h>
+
+unsigned s390_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned s390_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned s390_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned s390_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int s390_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/sparc/kernel/sys_sparc.c

@@ -219,6 +219,21 @@ out:
 	return err;
 }
 
+int sparc_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
+{
+	if (ARCH_SUN4C_SUN4 &&
+	    (len > 0x20000000 ||
+	     ((flags & MAP_FIXED) &&
+	      addr < 0xe0000000 && addr + len > 0x20000000)))
+		return -EINVAL;
+
+	/* See asm-sparc/uaccess.h */
+	if (len > TASK_SIZE - PAGE_SIZE || addr + len > TASK_SIZE - PAGE_SIZE)
+		return -EINVAL;
+
+	return 0;
+}
+
 /* Linux version of mmap */
 static unsigned long do_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags, unsigned long fd,
@@ -233,25 +248,13 @@ static unsigned long do_mmap2(unsigned long addr, unsigned long len,
 			goto out;
 	}
 
-	retval = -EINVAL;
 	len = PAGE_ALIGN(len);
-	if (ARCH_SUN4C_SUN4 &&
-	    (len > 0x20000000 ||
-	     ((flags & MAP_FIXED) &&
-	      addr < 0xe0000000 && addr + len > 0x20000000)))
-		goto out_putf;
-
-	/* See asm-sparc/uaccess.h */
-	if (len > TASK_SIZE - PAGE_SIZE || addr + len > TASK_SIZE - PAGE_SIZE)
-		goto out_putf;
-
 	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
 
 	down_write(&current->mm->mmap_sem);
 	retval = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
 	up_write(&current->mm->mmap_sem);
 
-out_putf:
 	if (file)
 		fput(file);
 out:

arch/sparc64/kernel/sys_sparc.c

@@ -548,6 +548,26 @@ asmlinkage long sparc64_personality(unsigned long personality)
 	return ret;
 }
 
+int sparc64_mmap_check(unsigned long addr, unsigned long len,
+		unsigned long flags)
+{
+	if (test_thread_flag(TIF_32BIT)) {
+		if (len >= STACK_TOP32)
+			return -EINVAL;
+
+		if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
+			return -EINVAL;
+	} else {
+		if (len >= VA_EXCLUDE_START)
+			return -EINVAL;
+
+		if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* Linux version of mmap */
 asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags, unsigned long fd,
@@ -563,27 +583,11 @@ asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len,
 	}
 	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
 	len = PAGE_ALIGN(len);
-	retval = -EINVAL;
-
-	if (test_thread_flag(TIF_32BIT)) {
-		if (len >= STACK_TOP32)
-			goto out_putf;
-
-		if ((flags & MAP_FIXED) && addr > STACK_TOP32 - len)
-			goto out_putf;
-	} else {
-		if (len >= VA_EXCLUDE_START)
-			goto out_putf;
-
-		if ((flags & MAP_FIXED) && invalid_64bit_range(addr, len))
-			goto out_putf;
-	}
 
 	down_write(&current->mm->mmap_sem);
 	retval = do_mmap(file, addr, len, prot, flags, off);
 	up_write(&current->mm->mmap_sem);
 
-out_putf:
 	if (file)
 		fput(file);
 out:

arch/x86_64/ia32/audit.c

@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
+
+unsigned ia32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ia32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ia32_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/x86_64/kernel/audit.c

@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
 ~0U
 };
 
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
 static unsigned chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_IA32_EMULATION
+	extern int ia32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_I386)
+		return ia32_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
 static int __init audit_classes_init(void)
 {
 #ifdef CONFIG_IA32_EMULATION
 	extern __u32 ia32_dir_class[];
+	extern __u32 ia32_write_class[];
+	extern __u32 ia32_read_class[];
 	extern __u32 ia32_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
 #endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
 	return 0;

drivers/ide/ide-proc.c

@@ -376,6 +376,8 @@ static int proc_ide_read_media
 				break;
 		case ide_floppy:media = "floppy\n";
 				break;
+		case ide_optical:media = "optical\n";
+				break;
 		default:	media = "UNKNOWN\n";
 				break;
 	}

drivers/ide/pci/aec62xx.c

@@ -425,12 +425,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi
 	return d->init_setup(dev, d);
 }
 
-static const struct pci_device_id aec62xx_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
-	{ PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
+static struct pci_device_id aec62xx_pci_tbl[] = {
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 },
+	{ PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);

drivers/ide/pci/serverworks.c

@@ -649,11 +649,11 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device
 }
 
 static struct pci_device_id svwks_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3},
-	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

drivers/ide/pci/siimage.c

@@ -1082,10 +1082,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
 }
 
 static struct pci_device_id siimage_pci_tbl[] = {
-	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680,  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 #ifdef CONFIG_BLK_DEV_IDE_SATA
-	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1},
-	{ PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+	{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 #endif
 	{ 0, },
 };

drivers/ide/pci/sis5513.c

@@ -86,6 +86,8 @@ static const struct {
 	u8 chipset_family;
 	u8 flags;
 } SiSHostChipInfo[] = {
+	{ "SiS968",	PCI_DEVICE_ID_SI_968,	ATA_133  },
+	{ "SiS966",	PCI_DEVICE_ID_SI_966,	ATA_133  },
 	{ "SiS965",	PCI_DEVICE_ID_SI_965,	ATA_133  },
 	{ "SiS745",	PCI_DEVICE_ID_SI_745,	ATA_100  },
 	{ "SiS735",	PCI_DEVICE_ID_SI_735,	ATA_100  },

drivers/mmc/imxmmc.c

@@ -91,6 +91,8 @@ struct imxmci_host {
 	int			dma_allocated;
 
 	unsigned char		actual_bus_width;
+
+	int			prev_cmd_code;
 };
 
 #define IMXMCI_PEND_IRQ_b	0
@@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data)
 	 * partial FIFO fills and reads. The length has to be rounded up to burst size multiple.
 	 * This is required for SCR read at least.
 	 */
-	if (datasz < 64) {
+	if (datasz < 512) {
 		host->dma_size = datasz;
 		if (data->flags & MMC_DATA_READ) {
 			host->dma_dir = DMA_FROM_DEVICE;
 
 			/* Hack to enable read SCR */
-			if(datasz < 16) {
-				MMC_NOB = 1;
-				MMC_BLK_LEN = 16;
-			}
+			MMC_NOB = 1;
+			MMC_BLK_LEN = 512;
 		} else {
 			host->dma_dir = DMA_TO_DEVICE;
 		}
@@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request *
 
 	spin_unlock_irqrestore(&host->lock, flags);
 
+	if(req && req->cmd)
+		host->prev_cmd_code = req->cmd->opcode;
+
 	host->req = NULL;
 	host->cmd = NULL;
 	host->data = NULL;
@@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 {
 	int i;
 	int burst_len;
-	int flush_len;
 	int trans_done = 0;
 	unsigned int stat = *pstat;
 
@@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat)
 	dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n",
 		stat);
 
+	udelay(20);	/* required for clocks < 8MHz*/
+
 	if(host->dma_dir == DMA_FROM_DEVICE) {
 		imxmci_busy_wait_for_status(host, &stat,
 				STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE,
-				20, "imxmci_cpu_driven_data read");
+				50, "imxmci_cpu_driven_data read");
 
 		while((stat & (STATUS_APPL_BUFF_FF |  STATUS_DATA_TRANS_DONE)) &&
-		      (host->data_cnt < host->dma_size)) {
-			if(burst_len >= host->dma_size - host->data_cnt) {
-				flush_len = burst_len;
-				burst_len = host->dma_size - host->data_cnt;
-				flush_len -= burst_len;
-				host->data_cnt = host->dma_size;
-				trans_done = 1;
-			} else {
-				flush_len = 0;
-				host->data_cnt += burst_len;
-			}
+		      (host->data_cnt < 512)) {
+
+			udelay(20);	/* required for clocks < 8MHz*/
 
 			for(i = burst_len; i>=2 ; i-=2) {
-				*(host->data_ptr++) = MMC_BUFFER_ACCESS;
-				udelay(20);	/* required for clocks < 8MHz*/
+				u16 data;
+				data = MMC_BUFFER_ACCESS;
+				udelay(10);	/* required for clocks < 8MHz*/
+				if(host->data_cnt+2 <= host->dma_size) {
+					*(host->data_ptr++) = data;
+				} else {
+					if(host->data_cnt < host->dma_size)
+						*(u8*)(host->data_ptr) = data;
+				}
+				host->data_cnt += 2;
 			}
 
-			if(i == 1)
-				*(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS;
-
 			stat = MMC_STATUS;
 
-			/* Flush extra bytes from FIFO */
-			while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){
-				i = MMC_BUFFER_ACCESS;
-				stat = MMC_STATUS;
-				stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */
-			}
-
-			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n",
-				burst_len, stat);
+			dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n",
+				host->data_cnt, burst_len, stat);
 		}
+
+		if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512))
+			trans_done = 1;
+
+		if(host->dma_size & 0x1ff)
+			stat &= ~STATUS_CRC_READ_ERR;
+
 	} else {
 		imxmci_busy_wait_for_status(host, &stat,
 				STATUS_APPL_BUFF_FE,
@@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data)
 		       what, stat, MMC_INT_MASK);
 		dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n",
 		       MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma));
-		dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n",
-		       host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size);
+		dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n",
+		       host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size);
 	}
 
 	if(!host->present || timeout)

drivers/mmc/mmc.c

@@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca,
 
 EXPORT_SYMBOL(mmc_wait_for_app_cmd);
 
+/**
+ *	mmc_set_data_timeout - set the timeout for a data command
+ *	@data: data phase for command
+ *	@card: the MMC card associated with the data transfer
+ *	@write: flag to differentiate reads from writes
+ */
+void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card,
+			  int write)
+{
+	unsigned int mult;
+
+	/*
+	 * SD cards use a 100 multiplier rather than 10
+	 */
+	mult = mmc_card_sd(card) ? 100 : 10;
+
+	/*
+	 * Scale up the multiplier (and therefore the timeout) by
+	 * the r2w factor for writes.
+	 */
+	if (write)
+		mult <<= card->csd.r2w_factor;
+
+	data->timeout_ns = card->csd.tacc_ns * mult;
+	data->timeout_clks = card->csd.tacc_clks * mult;
+
+	/*
+	 * SD cards also have an upper limit on the timeout.
+	 */
+	if (mmc_card_sd(card)) {
+		unsigned int timeout_us, limit_us;
+
+		timeout_us = data->timeout_ns / 1000;
+		timeout_us += data->timeout_clks * 1000 /
+			(card->host->ios.clock / 1000);
+
+		if (write)
+			limit_us = 250000;
+		else
+			limit_us = 100000;
+
+		if (timeout_us > limit_us) {
+			data->timeout_ns = limit_us * 1000;
+			data->timeout_clks = 0;
+		}
+	}
+}
+EXPORT_SYMBOL(mmc_set_data_timeout);
+
 static int mmc_select_card(struct mmc_host *host, struct mmc_card *card);
 
 /**
@@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host)
 {
 	int err;
 	struct mmc_card *card;
-
 	struct mmc_request mrq;
 	struct mmc_command cmd;
 	struct mmc_data data;
-
 	struct scatterlist sg;
 
 	list_for_each_entry(card, &host->cards, node) {
@@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host)
 
 		memset(&data, 0, sizeof(struct mmc_data));
 
-		data.timeout_ns = card->csd.tacc_ns * 10;
-		data.timeout_clks = card->csd.tacc_clks * 10;
+		mmc_set_data_timeout(&data, card, 0);
+
 		data.blksz_bits = 3;
 		data.blksz = 1 << 3;
 		data.blocks = 1;

drivers/mmc/mmc_block.c

@@ -30,6 +30,7 @@
 #include <linux/mutex.h>
 
 #include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
 
 #include <asm/system.h>
@@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 
 		brq.cmd.arg = req->sector << 9;
 		brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-		brq.data.timeout_ns = card->csd.tacc_ns * 10;
-		brq.data.timeout_clks = card->csd.tacc_clks * 10;
 		brq.data.blksz_bits = md->block_bits;
 		brq.data.blksz = 1 << md->block_bits;
 		brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
@@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 		brq.stop.arg = 0;
 		brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
+		mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
+
 		if (rq_data_dir(req) == READ) {
 			brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
 			brq.data.flags |= MMC_DATA_READ;
@@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
 			brq.cmd.opcode = MMC_WRITE_BLOCK;
 			brq.data.flags |= MMC_DATA_WRITE;
 			brq.data.blocks = 1;
-
-			/*
-			 * Scale up the timeout by the r2w factor
-			 */
-			brq.data.timeout_ns <<= card->csd.r2w_factor;
-			brq.data.timeout_clks <<= card->csd.r2w_factor;
 		}
 
 		if (brq.data.blocks > 1) {
@@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
 	md->read_only = mmc_blk_readonly(card);
 
 	/*
-	 * Figure out a workable block size.  MMC cards have:
-	 *  - two block sizes, one for read and one for write.
-	 *  - may support partial reads and/or writes
-	 *    (allows block sizes smaller than specified)
-	 */
-	md->block_bits = card->csd.read_blkbits;
-	if (card->csd.write_blkbits != card->csd.read_blkbits) {
-		if (card->csd.write_blkbits < card->csd.read_blkbits &&
-		    card->csd.read_partial) {
-			/*
-			 * write block size is smaller than read block
-			 * size, but we support partial reads, so choose
-			 * the smaller write block size.
-			 */
-			md->block_bits = card->csd.write_blkbits;
-		} else if (card->csd.write_blkbits > card->csd.read_blkbits &&
-			   card->csd.write_partial) {
-			/*
-			 * read block size is smaller than write block
-			 * size, but we support partial writes.  Use read
-			 * block size.
-			 */
-		} else {
-			/*
-			 * We don't support this configuration for writes.
-			 */
-			printk(KERN_ERR "%s: unable to select block size for "
-				"writing (rb%u wb%u rp%u wp%u)\n",
-				mmc_card_id(card),
-				1 << card->csd.read_blkbits,
-				1 << card->csd.write_blkbits,
-				card->csd.read_partial,
-				card->csd.write_partial);
-			md->read_only = 1;
-		}
-	}
-
-	/*
-	 * Refuse to allow block sizes smaller than 512 bytes.
+	 * Both SD and MMC specifications state (although a bit
+	 * unclearly in the MMC case) that a block size of 512
+	 * bytes must always be supported by the card.
 	 */
-	if (md->block_bits < 9) {
-		printk(KERN_ERR "%s: unable to support block size %u\n",
-			mmc_card_id(card), 1 << md->block_bits);
-		ret = -EINVAL;
-		goto err_kfree;
-	}
+	md->block_bits = 9;
 
 	md->disk = alloc_disk(1 << MMC_SHIFT);
 	if (md->disk == NULL) {

drivers/net/Kconfig

@@ -2393,7 +2393,7 @@ config MYRI10GE
 	  you will need a newer firmware image.
 	  You may get this image or more information, at:
 
-	  <http://www.myri.com/Myri-10G/>
+	  <http://www.myri.com/scs/download-Myri10GE.html>
 
 	  To compile this driver as a module, choose M here and read
 	  <file:Documentation/networking/net-modules.txt>.  The module

drivers/net/dm9000.c

@@ -377,8 +377,8 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db)
 		kfree(db->data_req);
 	}
 
-	if (db->addr_res != NULL) {
-		release_resource(db->addr_res);
+	if (db->addr_req != NULL) {
+		release_resource(db->addr_req);
 		kfree(db->addr_req);
 	}
 }

drivers/usb/input/hid-core.c

@@ -1444,7 +1444,7 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_DEVICE_ID_GTCO_402		0x0402
 #define USB_DEVICE_ID_GTCO_403		0x0403
 #define USB_DEVICE_ID_GTCO_404		0x0404
-#define USB_DEVICE_ID_GTCO_404		0x0405
+#define USB_DEVICE_ID_GTCO_405		0x0405
 #define USB_DEVICE_ID_GTCO_500		0x0500
 #define USB_DEVICE_ID_GTCO_501		0x0501
 #define USB_DEVICE_ID_GTCO_502		0x0502
@@ -1657,7 +1657,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
-	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE },

drivers/usb/input/usbtouchscreen.c

@@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
 {
 	*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
-	*x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	*y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
 	*press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F);
 	*touch = ~pkt[7] & 0x20;
 

drivers/usb/misc/sisusbvga/sisusb.c

@@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf)
 
 static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0900) },
+	{ USB_DEVICE(0x0711, 0x0901) },
+	{ USB_DEVICE(0x0711, 0x0902) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }

drivers/usb/serial/ftdi_sio.c

@@ -506,6 +506,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
 	{ USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -467,6 +467,11 @@
 #define TESTO_VID			0x128D
 #define TESTO_USB_INTERFACE_PID		0x0001
 
+/*
+ * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
+ */
+#define FTDI_GAMMA_SCOUT_PID		0xD678	/* Gamma Scout online */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */

fs/ext3/inode.c

@@ -1009,11 +1009,14 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
 	buffer_trace_init(&dummy.b_history);
 	err = ext3_get_blocks_handle(handle, inode, block, 1,
 					&dummy, create, 1);
-	if (err == 1) {
+	/*
+	 * ext3_get_blocks_handle() returns number of blocks
+	 * mapped. 0 in case of a HOLE.
+	 */
+	if (err > 0) {
+		if (err > 1)
+			WARN_ON(1);
 		err = 0;
-	} else if (err >= 0) {
-		WARN_ON(1);
-		err = -EIO;
 	}
 	*errp = err;
 	if (!err && buffer_mapped(&dummy)) {

fs/nfs/direct.c

@@ -100,25 +100,6 @@ static inline int put_dreq(struct nfs_direct_req *dreq)
 	return atomic_dec_and_test(&dreq->io_count);
 }
 
-/*
- * "size" is never larger than rsize or wsize.
- */
-static inline int nfs_direct_count_pages(unsigned long user_addr, size_t size)
-{
-	int page_count;
-
-	page_count = (user_addr + size + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	page_count -= user_addr >> PAGE_SHIFT;
-	BUG_ON(page_count < 0);
-
-	return page_count;
-}
-
-static inline unsigned int nfs_max_pages(unsigned int size)
-{
-	return (size + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-}
-
 /**
  * nfs_direct_IO - NFS address space operation for direct I/O
  * @rw: direction (read or write)
@@ -276,28 +257,24 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo
 	struct nfs_open_context *ctx = dreq->ctx;
 	struct inode *inode = ctx->dentry->d_inode;
 	size_t rsize = NFS_SERVER(inode)->rsize;
-	unsigned int rpages = nfs_max_pages(rsize);
 	unsigned int pgbase;
 	int result;
 	ssize_t started = 0;
 
 	get_dreq(dreq);
 
-	pgbase = user_addr & ~PAGE_MASK;
 	do {
 		struct nfs_read_data *data;
 		size_t bytes;
 
+		pgbase = user_addr & ~PAGE_MASK;
+		bytes = min(rsize,count);
+
 		result = -ENOMEM;
-		data = nfs_readdata_alloc(rpages);
+		data = nfs_readdata_alloc(pgbase + bytes);
 		if (unlikely(!data))
 			break;
 
-		bytes = rsize;
-		if (count < rsize)
-			bytes = count;
-
-		data->npages = nfs_direct_count_pages(user_addr, bytes);
 		down_read(&current->mm->mmap_sem);
 		result = get_user_pages(current, current->mm, user_addr,
 					data->npages, 1, 0, data->pagevec, NULL);
@@ -344,8 +321,10 @@ static ssize_t nfs_direct_read_schedule(struct nfs_direct_req *dreq, unsigned lo
 		started += bytes;
 		user_addr += bytes;
 		pos += bytes;
+		/* FIXME: Remove this unnecessary math from final patch */
 		pgbase += bytes;
 		pgbase &= ~PAGE_MASK;
+		BUG_ON(pgbase != (user_addr & ~PAGE_MASK));
 
 		count -= bytes;
 	} while (count != 0);
@@ -524,7 +503,7 @@ static void nfs_direct_write_complete(struct nfs_direct_req *dreq, struct inode
 
 static void nfs_alloc_commit_data(struct nfs_direct_req *dreq)
 {
-	dreq->commit_data = nfs_commit_alloc(0);
+	dreq->commit_data = nfs_commit_alloc();
 	if (dreq->commit_data != NULL)
 		dreq->commit_data->req = (struct nfs_page *) dreq;
 }
@@ -605,28 +584,24 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l
 	struct nfs_open_context *ctx = dreq->ctx;
 	struct inode *inode = ctx->dentry->d_inode;
 	size_t wsize = NFS_SERVER(inode)->wsize;
-	unsigned int wpages = nfs_max_pages(wsize);
 	unsigned int pgbase;
 	int result;
 	ssize_t started = 0;
 
 	get_dreq(dreq);
 
-	pgbase = user_addr & ~PAGE_MASK;
 	do {
 		struct nfs_write_data *data;
 		size_t bytes;
 
+		pgbase = user_addr & ~PAGE_MASK;
+		bytes = min(wsize,count);
+
 		result = -ENOMEM;
-		data = nfs_writedata_alloc(wpages);
+		data = nfs_writedata_alloc(pgbase + bytes);
 		if (unlikely(!data))
 			break;
 
-		bytes = wsize;
-		if (count < wsize)
-			bytes = count;
-
-		data->npages = nfs_direct_count_pages(user_addr, bytes);
 		down_read(&current->mm->mmap_sem);
 		result = get_user_pages(current, current->mm, user_addr,
 					data->npages, 0, 0, data->pagevec, NULL);
@@ -676,8 +651,11 @@ static ssize_t nfs_direct_write_schedule(struct nfs_direct_req *dreq, unsigned l
 		started += bytes;
 		user_addr += bytes;
 		pos += bytes;
+
+		/* FIXME: Remove this useless math from the final patch */
 		pgbase += bytes;
 		pgbase &= ~PAGE_MASK;
+		BUG_ON(pgbase != (user_addr & ~PAGE_MASK));
 
 		count -= bytes;
 	} while (count != 0);

fs/nfs/read.c

@@ -43,13 +43,15 @@ static mempool_t *nfs_rdata_mempool;
 
 #define MIN_POOL_READ	(32)
 
-struct nfs_read_data *nfs_readdata_alloc(unsigned int pagecount)
+struct nfs_read_data *nfs_readdata_alloc(size_t len)
 {
+	unsigned int pagecount = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	struct nfs_read_data *p = mempool_alloc(nfs_rdata_mempool, SLAB_NOFS);
 
 	if (p) {
 		memset(p, 0, sizeof(*p));
 		INIT_LIST_HEAD(&p->pages);
+		p->npages = pagecount;
 		if (pagecount <= ARRAY_SIZE(p->page_array))
 			p->pagevec = p->page_array;
 		else {
@@ -140,7 +142,7 @@ static int nfs_readpage_sync(struct nfs_open_context *ctx, struct inode *inode,
 	int		result;
 	struct nfs_read_data *rdata;
 
-	rdata = nfs_readdata_alloc(1);
+	rdata = nfs_readdata_alloc(count);
 	if (!rdata)
 		return -ENOMEM;
 
@@ -336,25 +338,25 @@ static int nfs_pagein_multi(struct list_head *head, struct inode *inode)
 	struct nfs_page *req = nfs_list_entry(head->next);
 	struct page *page = req->wb_page;
 	struct nfs_read_data *data;
-	unsigned int rsize = NFS_SERVER(inode)->rsize;
-	unsigned int nbytes, offset;
+	size_t rsize = NFS_SERVER(inode)->rsize, nbytes;
+	unsigned int offset;
 	int requests = 0;
 	LIST_HEAD(list);
 
 	nfs_list_remove_request(req);
 
 	nbytes = req->wb_bytes;
-	for(;;) {
-		data = nfs_readdata_alloc(1);
+	do {
+		size_t len = min(nbytes,rsize);
+
+		data = nfs_readdata_alloc(len);
 		if (!data)
 			goto out_bad;
 		INIT_LIST_HEAD(&data->pages);
 		list_add(&data->pages, &list);
 		requests++;
-		if (nbytes <= rsize)
-			break;
-		nbytes -= rsize;
-	}
+		nbytes -= len;
+	} while(nbytes != 0);
 	atomic_set(&req->wb_complete, requests);
 
 	ClearPageError(page);
@@ -402,7 +404,7 @@ static int nfs_pagein_one(struct list_head *head, struct inode *inode)
 	if (NFS_SERVER(inode)->rsize < PAGE_CACHE_SIZE)
 		return nfs_pagein_multi(head, inode);
 
-	data = nfs_readdata_alloc(NFS_SERVER(inode)->rpages);
+	data = nfs_readdata_alloc(NFS_SERVER(inode)->rsize);
 	if (!data)
 		goto out_bad;
 

fs/nfs/write.c

@@ -90,22 +90,13 @@ static mempool_t *nfs_commit_mempool;
 
 static DECLARE_WAIT_QUEUE_HEAD(nfs_write_congestion);
 
-struct nfs_write_data *nfs_commit_alloc(unsigned int pagecount)
+struct nfs_write_data *nfs_commit_alloc(void)
 {
 	struct nfs_write_data *p = mempool_alloc(nfs_commit_mempool, SLAB_NOFS);
 
 	if (p) {
 		memset(p, 0, sizeof(*p));
 		INIT_LIST_HEAD(&p->pages);
-		if (pagecount <= ARRAY_SIZE(p->page_array))
-			p->pagevec = p->page_array;
-		else {
-			p->pagevec = kcalloc(pagecount, sizeof(struct page *), GFP_NOFS);
-			if (!p->pagevec) {
-				mempool_free(p, nfs_commit_mempool);
-				p = NULL;
-			}
-		}
 	}
 	return p;
 }
@@ -117,13 +108,15 @@ void nfs_commit_free(struct nfs_write_data *p)
 	mempool_free(p, nfs_commit_mempool);
 }
 
-struct nfs_write_data *nfs_writedata_alloc(unsigned int pagecount)
+struct nfs_write_data *nfs_writedata_alloc(size_t len)
 {
+	unsigned int pagecount = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 	struct nfs_write_data *p = mempool_alloc(nfs_wdata_mempool, SLAB_NOFS);
 
 	if (p) {
 		memset(p, 0, sizeof(*p));
 		INIT_LIST_HEAD(&p->pages);
+		p->npages = pagecount;
 		if (pagecount <= ARRAY_SIZE(p->page_array))
 			p->pagevec = p->page_array;
 		else {
@@ -208,7 +201,7 @@ static int nfs_writepage_sync(struct nfs_open_context *ctx, struct inode *inode,
 	int		result, written = 0;
 	struct nfs_write_data *wdata;
 
-	wdata = nfs_writedata_alloc(1);
+	wdata = nfs_writedata_alloc(wsize);
 	if (!wdata)
 		return -ENOMEM;
 
@@ -999,24 +992,24 @@ static int nfs_flush_multi(struct inode *inode, struct list_head *head, int how)
 	struct nfs_page *req = nfs_list_entry(head->next);
 	struct page *page = req->wb_page;
 	struct nfs_write_data *data;
-	unsigned int wsize = NFS_SERVER(inode)->wsize;
-	unsigned int nbytes, offset;
+	size_t wsize = NFS_SERVER(inode)->wsize, nbytes;
+	unsigned int offset;
 	int requests = 0;
 	LIST_HEAD(list);
 
 	nfs_list_remove_request(req);
 
 	nbytes = req->wb_bytes;
-	for (;;) {
-		data = nfs_writedata_alloc(1);
+	do {
+		size_t len = min(nbytes, wsize);
+
+		data = nfs_writedata_alloc(len);
 		if (!data)
 			goto out_bad;
 		list_add(&data->pages, &list);
 		requests++;
-		if (nbytes <= wsize)
-			break;
-		nbytes -= wsize;
-	}
+		nbytes -= len;
+	} while (nbytes != 0);
 	atomic_set(&req->wb_complete, requests);
 
 	ClearPageError(page);
@@ -1070,7 +1063,7 @@ static int nfs_flush_one(struct inode *inode, struct list_head *head, int how)
 	struct nfs_write_data	*data;
 	unsigned int		count;
 
-	data = nfs_writedata_alloc(NFS_SERVER(inode)->wpages);
+	data = nfs_writedata_alloc(NFS_SERVER(inode)->wsize);
 	if (!data)
 		goto out_bad;
 
@@ -1378,7 +1371,7 @@ nfs_commit_list(struct inode *inode, struct list_head *head, int how)
 	struct nfs_write_data	*data;
 	struct nfs_page         *req;
 
-	data = nfs_commit_alloc(NFS_SERVER(inode)->wpages);
+	data = nfs_commit_alloc();
 
 	if (!data)
 		goto out_bad;

fs/super.c

@@ -49,6 +49,7 @@ DEFINE_SPINLOCK(sb_lock);
 
 /**
  *	alloc_super	-	create new superblock
+ *	@type:	filesystem type superblock should belong to
  *
  *	Allocates and initializes a new &struct super_block.  alloc_super()
  *	returns a pointer new superblock or %NULL if allocation had failed.

include/asm-arm/arch-s3c2410/anubis-cpld.h

@@ -9,9 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *
 */
 
 #ifndef __ASM_ARCH_ANUBISCPLD_H

include/asm-arm/arch-s3c2410/anubis-irq.h

@@ -9,9 +9,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- */
+*/
 
 #ifndef __ASM_ARCH_ANUBISIRQ_H
 #define __ASM_ARCH_ANUBISIRQ_H

include/asm-arm/arch-s3c2410/anubis-map.h

@@ -9,8 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
 */
 
 /* needs arch/map.h including with this */

include/asm-arm/arch-s3c2410/audio.h

@@ -9,10 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *	20-Nov-2004 BJD  Created file
- *	07-Mar-2005 BJD  Added suspend/resume calls
 */
 
 #ifndef __ASM_ARCH_AUDIO_H

include/asm-arm/arch-s3c2410/bast-cpld.h

@@ -8,11 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  25-May-2003 BJD  Created file, added CTRL1 registers
- *  30-Aug-2004 BJD  Updated definitions from 2.4.26 port
- *  30-Aug-2004 BJD  Added CTRL3 and CTRL4 definitions
 */
 
 #ifndef __ASM_ARCH_BASTCPLD_H

include/asm-arm/arch-s3c2410/bast-irq.h

@@ -8,11 +8,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  14-Sep-2004 BJD  Fixed IRQ_USBOC definition
- *  06-Jan-2003 BJD  Linux 2.6.0 version
- */
+*/
 
 #ifndef __ASM_ARCH_BASTIRQ_H
 #define __ASM_ARCH_BASTIRQ_H

include/asm-arm/arch-s3c2410/bast-map.h

@@ -8,10 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  06-Jan-2003 BJD  Linux 2.6.0 version, moved bast specifics from arch/map.h
- *  12-Mar-2004 BJD  Fixed header include protection
 */
 
 /* needs arch/map.h including with this */

include/asm-arm/arch-s3c2410/bast-pmu.h

@@ -9,9 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *	08-Oct-2003	BJD	Initial creation
 */
 
 #ifndef __ASM_ARCH_BASTPMU_H

include/asm-arm/arch-s3c2410/debug-macro.S

@@ -10,9 +10,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
 */
 
 #include <asm/arch/map.h>

include/asm-arm/arch-s3c2410/fb.h

@@ -7,13 +7,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *
- *  Changelog:
- *	07-Sep-2004	RTP	Created file
- *	03-Nov-2004	BJD	Updated and minor cleanups
- *	03-Aug-2005     RTP     Renamed to fb.h
- *	26-Oct-2005	BJD	Changed name of platdata init
 */
 
 #ifndef __ASM_ARM_FB_H

include/asm-arm/arch-s3c2410/hardware.h

@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  21-May-2003 BJD  Created file
- *  06-Jun-2003 BJD  Added CPU frequency settings
- *  03-Sep-2003 BJD  Linux v2.6 support
- *  12-Mar-2004 BJD  Fixed include protection, fixed type of clock vars
- *  14-Sep-2004 BJD  Added misccr and getpin to gpio
- *  01-Oct-2004 BJD  Added the new gpio functions
- *  16-Oct-2004 BJD  Removed the clock variables
- *  15-Jan-2006 LCVR Added s3c2400_gpio_getirq()
 */
 
 #ifndef __ASM_ARCH_HARDWARE_H

include/asm-arm/arch-s3c2410/idle.h

@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 CPU Idle controls
- *
- *  Changelog:
- *	28-Oct-2004  BJD  Initial version
- *
 */
 
 #ifndef __ASM_ARCH_IDLE_H

include/asm-arm/arch-s3c2410/iic.h

@@ -8,10 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *	05-Oct-2004 BJD  Created file
- *	19-Oct-2004 BJD	 Updated for s3c2440
 */
 
 #ifndef __ASM_ARCH_IIC_H

include/asm-arm/arch-s3c2410/io.h

@@ -4,13 +4,7 @@
  *
  * Copyright (C) 1997 Russell King
  *	     (C) 2003 Simtec Electronics
- *
- * Modifications:
- *  06-Dec-1997	RMK	Created.
- *  02-Sep-2003 BJD	Modified for S3C2410
- *  10-Mar-2005 LCVR	Changed S3C2410_VA to S3C24XX_VA
- *  13-Oct-2005 BJD	Fixed problems with LDRH/STRH offset range
- */
+*/
 
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H

include/asm-arm/arch-s3c2410/irqs.h

@@ -6,14 +6,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD  Created file
- *  08-Jan-2003 BJD  Linux 2.6.0 version, moved BAST bits out
- *  12-Mar-2004 BJD  Fixed bug in header protection
- *  10-Feb-2005 BJD  Added camera IRQ from guillaume.gourat@nexvision.tv
- *  28-Feb-2005 BJD  Updated s3c2440 IRQs
- */
+*/
 
 
 #ifndef __ASM_ARCH_IRQS_H

include/asm-arm/arch-s3c2410/map.h

@@ -8,13 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD   Created file
- *  06-Jan-2003 BJD   Linux 2.6.0 version, moved bast specifics out
- *  10-Feb-2005 BJD   Added CAMIF definition from guillaume.gourat@nexvision.tv
- *  10-Mar-2005 LCVR  Added support to S3C2400, changed {VA,SZ} names
- *  15-Jan-2006 LCVR  Added S3C24XX_PA macros for common S3C24XX resources
 */
 
 #ifndef __ASM_ARCH_MAP_H

include/asm-arm/arch-s3c2410/memory.h

@@ -1,6 +1,4 @@
-/*
- *  linux/include/asm-arm/arch-s3c2410/memory.h
- *
+/* linux/include/asm-arm/arch-s3c2410/memory.h
  *  from linux/include/asm-arm/arch-rpc/memory.h
  *
  *  Copyright (C) 1996,1997,1998 Russell King.
@@ -8,16 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *  Changelog:
- *   20-Oct-1996 RMK	Created
- *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
- *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
- *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
- *   21-Mar-1999 RMK	Renamed to memory.h
- *		 RMK	Added TASK_SIZE and PAGE_OFFSET
- *   05-Apr-2004 BJD    Copied and altered for arch-s3c2410
- *   17-Mar-2005 LCVR   Modified for S3C2400
 */
 
 #ifndef __ASM_ARCH_MEMORY_H

include/asm-arm/arch-s3c2410/nand.h

@@ -8,9 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *	23-Sep-2004 BJD  Created file
 */
 
 /* struct s3c2410_nand_set

include/asm-arm/arch-s3c2410/osiris-map.h

@@ -9,8 +9,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
 */
 
 /* needs arch/map.h including with this */

include/asm-arm/arch-s3c2410/regs-adc.h

@@ -7,9 +7,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 ADC registers
- *
- *  Changelog:
- *    27-09-2004     SAH     Created file
 */
 
 #ifndef __ASM_ARCH_REGS_ADC_H

include/asm-arm/arch-s3c2410/regs-clock.h

@@ -8,18 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 clock register definitions
- *
- *  Changelog:
- *    18-Aug-2004 Ben Dooks         Added 2440 definitions
- *    08-Aug-2004 Herbert Pötzl     Added CLKCON definitions
- *    19-06-2003  Ben Dooks         Created file
- *    12-03-2004  Ben Dooks         Updated include protection
- *    29-Sep-2004 Ben Dooks	    Fixed usage for assembly inclusion
- *    10-Feb-2005 Ben Dooks	    Fixed CAMDIVN address (Guillaume Gourat)
- *    10-Mar-2005 Lucas Villa Real  Changed S3C2410_VA to S3C24XX_VA
- *    27-Aug-2005 Ben Dooks	    Add clock-slow info
- *    20-Oct-2005 Ben Dooks	    Fixed overflow in PLL (Guillaume Gourat)
- *    20-Oct-2005 Ben Dooks	    Add masks for DCLK (Guillaume Gourat)
 */
 
 #ifndef __ASM_ARM_REGS_CLOCK

include/asm-arm/arch-s3c2410/regs-gpio.h

@@ -8,21 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 GPIO register definitions
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    23-06-2003     BJD     Updated GSTATUS registers
- *    12-03-2004     BJD     Updated include protection
- *    20-07-2004     BJD     Added GPIO pin numbers, added Port A definitions
- *    04-10-2004     BJD     Fixed number of bugs, added EXT IRQ filter defs
- *    17-10-2004     BJD     Added GSTATUS1 register definitions
- *    18-11-2004     BJD     Fixed definitions of GPE3, GPE4, GPE5 and GPE6
- *    18-11-2004     BJD     Added S3C2440 AC97 controls
- *    10-Mar-2005    LCVR    Changed S3C2410_VA to S3C24XX_VA
- *    28-Mar-2005    LCVR    Fixed definition of GPB10
- *    26-Oct-2005    BJD     Added generic configuration types
- *    27-Nov-2005    LCVR    Added definitions to S3C2400 registers
- *    15-Jan-2006    LCVR    Written S3C24XX_GPIO_BASE() macro
 */
 
 

include/asm-arm/arch-s3c2410/regs-gpioj.h

@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2440 GPIO J register definitions
- *
- *  Changelog:
- *    11-Aug-2004     BJD     Created file
- *    10-Feb-2005     BJD     Fix GPJ12 definition (Guillaume Gourat)
 */
 
 

include/asm-arm/arch-s3c2410/regs-iic.h

@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 I2C Controller
- *
- *  Changelog:
- *	03-Oct-2004  BJD  Initial include for Linux
- *	08-Nov-2004  BJD  Added S3C2440 filter register
 */
 
 #ifndef __ASM_ARCH_REGS_IIC_H

include/asm-arm/arch-s3c2410/regs-iis.h

@@ -8,17 +8,7 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 IIS register definition
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    26-06-2003     BJD     Finished off definitions for register addresses
- *    12-03-2004     BJD     Updated include protection
- *    07-03-2005     BJD     Added FIFO size flags and S3C2440 MPLL
- *    05-04-2005     LCVR    Added IISFCON definitions for the S3C2400
- *    18-07-2005     DA      Change IISCON_MPLL to IISMOD_MPLL
- *                           Correct IISMOD_256FS and IISMOD_384FS
- *                           Add IISCON_PSCEN
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_IIS_H
 #define __ASM_ARCH_REGS_IIS_H

include/asm-arm/arch-s3c2410/regs-irq.h

@@ -6,14 +6,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    12-03-2004     BJD     Updated include protection
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
- */
+*/
 
 
 #ifndef ___ASM_ARCH_REGS_IRQ_H

include/asm-arm/arch-s3c2410/regs-lcd.h

@@ -6,14 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- *
- *
- *  Changelog:
- *    12-06-2003     BJD     Created file
- *    26-06-2003     BJD     Updated LCDCON register definitions
- *    12-03-2004     BJD     Updated include protection
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
 */
 
 

include/asm-arm/arch-s3c2410/regs-mem.h

@@ -8,12 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Memory Control register definitions
- *
- *  Changelog:
- *	29-Sep-2004  BJD  Initial include for Linux
- *      10-Mar-2005  LCVR Changed S3C2410_VA to S3C24XX_VA
- *      04-Apr-2005  LCVR Added S3C2400 DRAM/BANKSIZE_MASK definitions
- *
 */
 
 #ifndef __ASM_ARM_MEMREGS_H

include/asm-arm/arch-s3c2410/regs-nand.h

@@ -8,10 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 NAND register definitions
- *
- *  Changelog:
- *    18-Aug-2004    BJD     Copied file from 2.4 and updated
- *    01-May-2005    BJD     Added definitions for s3c2440 controller
 */
 
 #ifndef __ASM_ARM_REGS_NAND

include/asm-arm/arch-s3c2410/regs-rtc.h

@@ -8,11 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Internal RTC register definition
- *
- *  Changelog:
- *    19-06-2003     BJD     Created file
- *    12-03-2004     BJD     Updated include protection
- *    15-01-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
 */
 
 #ifndef __ASM_ARCH_REGS_RTC_H

include/asm-arm/arch-s3c2410/regs-sdi.h

@@ -8,11 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 MMC/SDIO register definitions
- *
- *  Changelog:
- *    18-Aug-2004 Ben Dooks      Created initial file
- *    29-Nov-2004 Koen Martens   Added some missing defines, fixed duplicates
- *    29-Nov-2004 Ben Dooks	 Updated Koen's patch
 */
 
 #ifndef __ASM_ARM_REGS_SDI

include/asm-arm/arch-s3c2410/regs-serial.h

@@ -27,10 +27,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Modifications:
- *     10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA (s3c2400 support)
- */
+*/
 
 #ifndef __ASM_ARM_REGS_SERIAL_H
 #define __ASM_ARM_REGS_SERIAL_H

include/asm-arm/arch-s3c2410/regs-spi.h

@@ -7,13 +7,7 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 SPI register definition
- *
- *  Changelog:
- *    20-04-2004     KF      Created file
- *    04-10-2004     BJD     Removed VA address (no longer mapped)
- *			     tidied file for submission
- *    03-04-2005     LCVR    Added S3C2400_SPPIN_nCS definition
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_SPI_H
 #define __ASM_ARCH_REGS_SPI_H

include/asm-arm/arch-s3c2410/regs-timer.h

@@ -8,13 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Timer configuration
- *
- *  Changelog:
- *    05-06-2003     BJD     Created file
- *    26-06-2003     BJD     Added more timer definitions to mux / control
- *    12-03-2004     BJD     Updated include protection
- *    10-02-2005     BJD     Added S3C2410_TCFG1_MUX4_SHIFT (Guillaume Gourat)
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
 */
 
 

include/asm-arm/arch-s3c2410/regs-udc.h

@@ -6,13 +6,7 @@
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
- *
- *  Changelog:
- *    01-08-2004	Initial creation
- *    12-09-2004	Cleanup for submission
- *    24-10-2004	Fixed S3C2410_UDC_MAXP_REG definition
- *    10-03-2005	Changed S3C2410_VA to S3C24XX_VA
- */
+*/
 
 #ifndef __ASM_ARCH_REGS_UDC_H
 #define __ASM_ARCH_REGS_UDC_H

include/asm-arm/arch-s3c2410/regs-watchdog.h

@@ -1,4 +1,4 @@
-/* linux/include/asm/arch-s3c2410/regs0watchdog.h
+/* linux/include/asm/arch-s3c2410/regs-watchdog.h
  *
  * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
  *		      http://www.simtec.co.uk/products/SWLINUX/
@@ -8,11 +8,6 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 Watchdog timer control
- *
- *  Changelog:
- *    21-06-2003     BJD     Created file
- *    12-03-2004     BJD     Updated include protection
- *    10-03-2005     LCVR    Changed S3C2410_VA to S3C24XX_VA
 */
 
 

include/asm-arm/arch-s3c2410/system.h

@@ -8,14 +8,7 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  12-May-2003 BJD  Created file
- *  14-May-2003 BJD  Removed idle to aid debugging
- *  12-Jun-2003 BJD  Added reset via watchdog
- *  04-Sep-2003 BJD  Moved to v2.6
- *  28-Oct-2004 BJD  Added over-ride for idle, and fixed reset panic()
- */
+*/
 
 #include <asm/hardware.h>
 #include <asm/io.h>

include/asm-arm/arch-s3c2410/timex.h

@@ -8,12 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  02-Sep-2003 BJD  Created file
- *  05-Jan-2004 BJD  Updated for Linux 2.6.0
- *  22-Nov-2004 BJD  Fixed CLOCK_TICK_RATE
- *  10-Jan-2004 BJD  Removed s3c2410_clock_tick_rate
 */
 
 #ifndef __ASM_ARCH_TIMEX_H

include/asm-arm/arch-s3c2410/uncompress.h

@@ -8,15 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  22-May-2003 BJD  Created
- *  08-Sep-2003 BJD  Moved to linux v2.6
- *  12-Mar-2004 BJD  Updated header protection
- *  12-Oct-2004 BJD  Take account of debug uart configuration
- *  15-Nov-2004 BJD  Fixed uart configuration
- *  22-Feb-2005 BJD  Added watchdog to uncompress
- *  04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
 */
 
 #ifndef __ASM_ARCH_UNCOMPRESS_H

include/asm-arm/arch-s3c2410/usb-control.h

@@ -8,11 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Changelog:
- *  11-Sep-2004 BJD  Created file
- *  21-Sep-2004 BJD  Updated port info
- *  09-Aug-2005 BJD  Renamed s3c2410_report_oc s3c2410_usb_report_oc
 */
 
 #ifndef __ASM_ARCH_USBCONTROL_H

include/asm-arm/arch-s3c2410/vmalloc.h

@@ -10,11 +10,7 @@
  * published by the Free Software Foundation.
  *
  * S3C2410 vmalloc definition
- *
- *  Changelog:
- *    12-Mar-2004 BJD	Fixed header, added include protection
- *    12=Mar-2004 BJD	Fixed VMALLOC_END definitions
- */
+*/
 
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H