ide: Stop mapping ROMs

Various old IDE drivers go mapping ROM devices for no apparent reason and
without using the ROM mapping API we now have. They don't actually use
the ROM they map and the new libata drivers are happy without it being
mapped so rather than port them lets just junk it for the next -rc1.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/pci/aec62xx.c

@@ -174,12 +174,6 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 {
 	int bus_speed = system_bus_clock();
 
-	if (dev->resource[PCI_ROM_RESOURCE].start) {
-		pci_write_config_dword(dev, PCI_ROM_ADDRESS, dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-		printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
-			(unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
-	}
-
 	if (bus_speed <= 33)
 		pci_set_drvdata(dev, (void *) aec6xxx_33_base);
 	else

drivers/ide/pci/hpt34x.c

@@ -120,17 +120,10 @@ static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const cha
 	pci_write_config_byte(dev, HPT34X_PCI_INIT_REG, 0x00);
 	pci_read_config_word(dev, PCI_COMMAND, &cmd);
 
-	if (cmd & PCI_COMMAND_MEMORY) {
-		if (pci_resource_start(dev, PCI_ROM_RESOURCE)) {
-			pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-				dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-			printk(KERN_INFO "HPT345: ROM enabled at 0x%08lx\n",
-				(unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
-		}
+	if (cmd & PCI_COMMAND_MEMORY)
 		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xF0);
-	} else {
+	else
 		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-	}
 
 	/*
 	 * Since 20-23 can be assigned and are R/W, we correct them.

drivers/ide/pci/hpt366.c

@@ -994,14 +994,6 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 	 */
 	*info = *(struct hpt_info *)pci_get_drvdata(dev);
 
-	/*
-	 * FIXME: Not portable. Also, why do we enable the ROM in the first place?
-	 * We don't seem to be using it.
-	 */
-	if (dev->resource[PCI_ROM_RESOURCE].start)
-		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-
 	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
 	pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);

drivers/ide/pci/pdc202xx_new.c

@@ -378,13 +378,6 @@ static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const cha
 	int f, r;
 	u8 pll_ctl0, pll_ctl1;
 
-	if (dev->resource[PCI_ROM_RESOURCE].start) {
-		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-		printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
-			(unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
-	}
-
 #ifdef CONFIG_PPC_PMAC
 	apple_kiwi_init(dev);
 #endif

drivers/ide/pci/pdc202xx_old.c

@@ -316,14 +316,6 @@ static void pdc202xx_reset (ide_drive_t *drive)
 static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
 							const char *name)
 {
-	/* This doesn't appear needed */
-	if (dev->resource[PCI_ROM_RESOURCE].start) {
-		pci_write_config_dword(dev, PCI_ROM_ADDRESS,
-			dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
-		printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
-			(unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
-	}
-
 	return dev->irq;
 }