Staging: rt2860: remove dead code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rt2860/ap.h

@@ -516,9 +516,6 @@ BOOLEAN APPeerBeaconAndProbeRspSanity(
     OUT BOOLEAN *ExtendedRateIeExist,
     OUT UCHAR *Erp);
 
-// ap_info.c
-
-
 
 // ================== end of AP RTMP.h ========================
 

drivers/staging/rt2860/chlist.h

@@ -1195,49 +1195,6 @@ static inline VOID N_ChannelCheck(
 				pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
 				//pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_NONE;	// We didn't set the ExtCh as NONE due to it'll set in RTMPSetHT()
 			}
-#if 0
-			switch (pAd->CommonCfg.CountryRegion  & 0x7f)
-			{
-				case REGION_0_BG_BAND:	// 1 -11
-				case REGION_1_BG_BAND:	// 1 - 13
-				case REGION_5_BG_BAND:	// 1 - 14
-					if (Channel <= 4)
-					{
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					}
-					else if (Channel >= 8)
-					{
-						if ((ChannelNum - Channel) < 4)
-							pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					}
-					break;
-
-				case REGION_2_BG_BAND:	// 10 - 11
-				case REGION_3_BG_BAND:	// 10 - 13
-				case REGION_4_BG_BAND:	// 14
-					pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-					break;
-
-				case REGION_6_BG_BAND:	// 3 - 9
-					if (Channel <= 5)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					else if (Channel == 6)
-						pAd->CommonCfg.RegTransmitSetting.field.BW  = BW_20;
-					else if (Channel >= 7)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					break;
-
-				case REGION_7_BG_BAND:  // 5 - 13
-					if (Channel <= 8)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE;
-					else if (Channel >= 10)
-						pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW;
-					break;
-
-				default:	// Error. should never happen
-					break;
-			}
-#endif
 		}
 	}
 

drivers/staging/rt2860/common/ba_action.c

@@ -444,9 +444,6 @@ void ba_flush_reordering_timeout_mpdus(
 		&& (pBAEntry->list.qlen > 0)
 	   )
 		{
-//		printk("timeout[%d] (%lx-%lx = %d > %d): %x, ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-//			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), REORDERING_PACKET_TIMEOUT,
-//			   pBAEntry->LastIndSeq);
     		//
 		// force LastIndSeq to shift to LastIndSeq+1
     		//
@@ -463,22 +460,7 @@ void ba_flush_reordering_timeout_mpdus(
     			pBAEntry->LastIndSeq = Sequence;
     		}
 
-		//printk("%x, flush one!\n", pBAEntry->LastIndSeq);
-
 	}
-#if 0
-	else if (
-			 (RTMP_TIME_AFTER((unsigned long)Now32, (unsigned long)(pBAEntry->LastIndSeqAtTimer+(MAX_REORDERING_PACKET_TIMEOUT))) &&
-			  (pBAEntry->list.qlen > 1))
-			)
-		{
-		DBGPRINT(RT_DEBUG_TRACE,("timeout[%d] (%lx-%lx = %d > %d): %x\n ", pBAEntry->list.qlen, Now32, (pBAEntry->LastIndSeqAtTimer),
-			   (int)((long) Now32 - (long)(pBAEntry->LastIndSeqAtTimer)), MAX_REORDERING_PACKET_TIMEOUT,
-			   pBAEntry->LastIndSeq));
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-			pBAEntry->LastIndSeqAtTimer = Now32;
-				}
-#endif
 }
 
 
@@ -692,10 +674,6 @@ BOOLEAN BARecSessionAdd(
 			RTMPInitTimer(pAd, &pBAEntry->RECBATimer, GET_TIMER_FUNCTION(BARecSessionIdleTimeout), pBAEntry, TRUE);
 		}
 
-#if 0	// for debugging
-		RTMPSetTimer(&pBAEntry->RECBATimer, REC_BA_SESSION_IDLE_TIMEOUT);
-#endif
-
 		// Set Bitmap flag.
 		pEntry->RXBAbitmap |= (1<<TID);
 		pEntry->BARecWcidArray[TID] = Idx;
@@ -1556,13 +1534,9 @@ static VOID ba_enqueue_reordering_packet(
 	}
 	else
 	{
-#if 0
-		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d:%d) Can't allocate reordering mpdu blk\n",
-								   blk_count, pBAEntry->list.qlen));
-#else
 		DBGPRINT(RT_DEBUG_ERROR,  ("!!! (%d) Can't allocate reordering mpdu blk\n",
 								   pBAEntry->list.qlen));
-#endif
+
 		/*
 		 * flush all pending reordering mpdus
 		 * and receving mpdu to upper layer
@@ -1610,29 +1584,11 @@ VOID Indicate_AMPDU_Packet(
 
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU) &&  (pRxBlk->DataSize > MAX_RX_PKT_LEN))
 	{
-#if 0 // sample take off, no use
-		static int err_size;
-
-		err_size++;
-		if (err_size > 20) {
-			 printk("AMPDU DataSize = %d\n", pRxBlk->DataSize);
-			 hex_dump("802.11 Header", (UCHAR *)pRxBlk->pHeader, 24);
-			 hex_dump("Payload", pRxBlk->pData, 64);
-			 err_size = 0;
-		}
-#endif
 		// release packet
 		RELEASE_NDIS_PACKET(pAd, pRxBlk->pRxPacket, NDIS_STATUS_FAILURE);
 		return;
 	}
 
-
-#if 0 // test
-	/* Rec BA Session had been torn down */
-	INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-	return;
-#endif
-
 	if (Wcid < MAX_LEN_OF_MAC_TABLE)
 	{
 		Idx = pAd->MacTab.Content[Wcid].BARecWcidArray[TID];
@@ -1727,10 +1683,6 @@ VOID Indicate_AMPDU_Packet(
 	//
 	else
 	{
-#if 0
-		ba_refresh_reordering_mpdus(pAd, pBAEntry);
-		INDICATE_LEGACY_OR_AMSDU(pAd, pRxBlk, FromWhichBSSID);
-#else
 		LONG WinStartSeq, TmpSeq;
 
 
@@ -1752,6 +1704,5 @@ VOID Indicate_AMPDU_Packet(
 		{
 			pBAEntry->LastIndSeq = TmpSeq;
 		}
-#endif
 	}
 }

drivers/staging/rt2860/common/cmm_info.c

@@ -1145,11 +1145,6 @@ VOID	RTMPSetPhyMode(
 	INT i;
 	// the selected phymode must be supported by the RF IC encoded in E2PROM
 
-	// if no change, do nothing
-	/* bug fix
-	if (pAd->CommonCfg.PhyMode == phymode)
-		return;
-    */
 	pAd->CommonCfg.PhyMode = (UCHAR)phymode;
 
 	DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel));
@@ -1981,7 +1976,6 @@ INT	Set_BASetup_Proc(
 		=>The six 2 digit hex-decimal number previous are the Mac address,
 		=>The seventh decimal number is the tid value.
 */
-	//printk("\n%s\n", arg);
 
 	if(strlen(arg) < 19)  //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format.
 		return FALSE;

drivers/staging/rt2860/common/dfs.c

@@ -80,18 +80,6 @@ VOID BbpRadarDetectionStart(
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 124, 0x28);
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, 125, 0xff);
 
-#if 0
-	// toggle Rx enable bit for radar detection.
-	// it's Andy's recommand.
-	{
-		UINT32 Value;
-	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
-	Value |= (0x1 << 3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	Value &= ~(0x1 << 3);
-	RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value);
-	}
-#endif
 	RadarPeriod = ((UINT)RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + (UINT)pAd->CommonCfg.RadarDetect.DfsSessionTime) < 250 ?
 			(RdIdleTimeTable[pAd->CommonCfg.RadarDetect.RDDurRegion][0] + pAd->CommonCfg.RadarDetect.DfsSessionTime) : 250;
 

drivers/staging/rt2860/common/mlme.c

@@ -1921,11 +1921,6 @@ VOID MlmeDynamicTxRateSwitching(
 	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
 	MAC_TABLE_ENTRY			*pEntry;
 
-	/*if (pAd->Antenna.field.RxPath > 1)
-		Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
-	else
-		Rssi = pAd->StaCfg.RssiSample.AvgRssi0;*/
-
 	//
 	// walk through MAC table, see if need to change AP's TX rate toward each entry
 	//
@@ -2109,7 +2104,6 @@ VOID MlmeDynamicTxRateSwitching(
 				{
 					MCS14 = idx;
 				}
-				//else if ((pCurrTxRate->CurrMCS == MCS_15)/* && (pCurrTxRate->ShortGI == GI_800)*/)	//we hope to use ShortGI as initial rate
 				else if ((pCurrTxRate->CurrMCS == MCS_15) && (pCurrTxRate->ShortGI == GI_800))	//we hope to use ShortGI as initial rate, however Atheros's chip has bugs when short GI
 				{
 					MCS15 = idx;
@@ -5216,9 +5210,7 @@ VOID 	AsicUpdateProtect(
 	// Config ASIC RTS threshold register
 	RTMP_IO_READ32(pAd, TX_RTS_CFG, &MacReg);
 	MacReg &= 0xFF0000FF;
-#if 0
-	MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
-#else
+
 	// If the user want disable RtsThreshold and enable Amsdu/Ralink-Aggregation, set the RtsThreshold as 4096
         if ((
 			(pAd->CommonCfg.BACapability.field.AmsduEnable) ||
@@ -5231,7 +5223,6 @@ VOID 	AsicUpdateProtect(
         {
 			MacReg |= (pAd->CommonCfg.RtsThreshold << 8);
         }
-#endif
 
 	RTMP_IO_WRITE32(pAd, TX_RTS_CFG, MacReg);
 

drivers/staging/rt2860/common/rtmp_init.c

@@ -969,67 +969,6 @@ VOID	RTMPReadChannelPwr(
 
 	// 4. Print and Debug
 	choffset = 14 + 12 + 16 + 7;
-
-
-#if 0
-	// Init the 802.11j channel number for TX channel power
-	// 0. 20MHz
-	for (i = 0; i < 3; i++)
-	{
-		pAd->TxPower11J[i].Channel = 8 + i * 4;
-		pAd->TxPower11J[i].BW = BW_20;
-	}
-
-	for (i = 0; i < 4; i++)
-	{
-		pAd->TxPower11J[i + 3].Channel = 34 + i * 4;
-		pAd->TxPower11J[i + 3].BW = BW_20;
-	}
-
-	for (i = 0; i < 4; i++)
-	{
-		pAd->TxPower11J[i + 7].Channel = 184 + i * 4;
-		pAd->TxPower11J[i + 7].BW = BW_20;
-	}
-
-	// 0. 10MHz
-	for (i = 0; i < 2; i++)
-	{
-		pAd->TxPower11J[i + 11].Channel = 7 + i;
-		pAd->TxPower11J[i + 11].BW = BW_10;
-	}
-	pAd->TxPower11J[13].Channel = 11;
-	pAd->TxPower11J[13].BW = BW_10;
-
-	for (i = 0; i < 3; i++)
-	{
-		pAd->TxPower11J[i + 14].Channel = 183 + i;
-		pAd->TxPower11J[i + 14].BW= BW_10;
-	}
-
-	for (i = 0; i < 3; i++)
-	{
-		pAd->TxPower11J[i + 17].Channel = 187 + i;
-		pAd->TxPower11J[i + 17].BW = BW_10;
-	}
-	for (i = 0; i < 10; i++)
-	{
-		Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX_PWR_OFFSET + i * 2);
-		Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_Japan_TX2_PWR_OFFSET + i * 2);
-
-		if ((Power.field.Byte0 < 36) && (Power.field.Byte0 > -6))
-			pAd->TxPower11J[i * 2].Power = Power.field.Byte0;
-
-		if ((Power.field.Byte1 < 36) && (Power.field.Byte1 > -6))
-			pAd->TxPower11J[i * 2 + 1].Power = Power.field.Byte1;
-
-		if ((Power2.field.Byte0 < 36) && (Power2.field.Byte0 > -6))
-			pAd->TxPower11J[i * 2].Power2 = Power2.field.Byte0;
-
-		if ((Power2.field.Byte1 < 36) && (Power2.field.Byte1 > -6))
-			pAd->TxPower11J[i * 2 + 1].Power2 = Power2.field.Byte1;
-	}
-#endif
 }
 
 /*
@@ -2217,10 +2156,6 @@ VOID NICUpdateFifoStaCounters(
 				if (pEntry->FIFOCount >= 1)
 				{
 					DBGPRINT(RT_DEBUG_TRACE, ("#"));
-#if 0
-					SendRefreshBAR(pAd, pEntry);
-					pEntry->NoBADataCountDown = 64;
-#else
 					pEntry->NoBADataCountDown = 64;
 
 					if(pEntry->PsMode == PWR_ACTIVE)
@@ -2241,10 +2176,7 @@ VOID NICUpdateFifoStaCounters(
 						pEntry->FIFOCount = 0;
 						pEntry->ContinueTxFailCnt = 0;
 					}
-#endif
-					//pEntry->FIFOCount = 0;
 				}
-				//pEntry->bSendBAR = TRUE;
 			}
 			else
 			{

drivers/staging/rt2860/rt_linux.h

@@ -647,10 +647,6 @@ void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 #define RTMP_GET_PACKET_MOREDATA(_p)				(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+7])
 
 
-#if 0
-//#define RTMP_SET_PACKET_DHCP(_p, _flg)   	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] = _flg)
-//#define RTMP_GET_PACKET_DHCP(_p)         	(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11])
-#else
 //
 //	Sepcific Pakcet Type definition
 //
@@ -730,8 +726,6 @@ void RTMP_GetCurrentSystemTime(LARGE_INTEGER *time);
 
 #define RTMP_GET_PACKET_IPV4(_p)		(RTPKT_TO_OSPKT(_p)->cb[CB_OFF+11] & RTMP_PACKET_SPECIFIC_IPV4)
 
-#endif
-
 
 // If this flag is set, it indicates that this EAPoL frame MUST be clear.
 #define RTMP_SET_PACKET_CLEAR_EAP_FRAME(_p, _flg)   (RTPKT_TO_OSPKT(_p)->cb[CB_OFF+12] = _flg)

drivers/staging/rt2860/rt_main_dev.c

@@ -596,9 +596,6 @@ static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER p
 	CHAR    slot_name[IFNAMSIZ];
 	struct net_device   *device;
 
-
-	//ether_setup(dev);
-
 #if WIRELESS_EXT >= 12
 	if (pAd->OpMode == OPMODE_STA)
 	{

drivers/staging/rt2860/rt_profile.c

@@ -1453,11 +1453,6 @@ NDIS_STATUS	RTMPReadParametersHook(
 
 	set_fs(orgfs);
 
-#if 0
-	current->cred->fsuid = orgfsuid;
-	current->cred->fsgid = orgfsgid;
-#endif
-
 	kfree(buffer);
 	kfree(tmpbuf);
 

drivers/staging/rt2860/rtmp.h

@@ -2516,7 +2516,6 @@ typedef struct _RTMP_ADAPTER
 
 	NDIS_MEDIA_STATE        IndicateMediaState;			// Base on Indication state, default is NdisMediaStateDisConnected
 
-	// MAT related parameters
 
 	// configuration: read from Registry & E2PROM
 	BOOLEAN                 bLocalAdminMAC;             // Use user changed MAC

drivers/staging/rt2860/sta/sync.c

@@ -1499,7 +1499,6 @@ VOID PeerBeacon(
 						// Set a flag to go to sleep . Then after parse this RxDoneInterrupt, will go to sleep mode.
 						RTMP_SET_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
 						pAd->ThisTbttNumToNextWakeUp = TbttNumToNextWakeUp;
-						//AsicSleepThenAutoWakeup(pAd, TbttNumToNextWakeUp);
 					}
 				}
 			}

drivers/staging/rt2870/ap.h

@@ -535,9 +535,6 @@ BOOLEAN APPeerBeaconAndProbeRspSanity(
     OUT BOOLEAN *ExtendedRateIeExist,
     OUT UCHAR *Erp);
 
-// ap_info.c
-
-
 
 // ================== end of AP RTMP.h ========================
 

drivers/staging/rt2870/rtmp.h

@@ -1239,7 +1239,6 @@ typedef struct _MLME_STRUCT {
 
 // structure for radar detection and channel switch
 typedef struct _RADAR_DETECT_STRUCT {
-    //BOOLEAN		IEEE80211H;			// 0: disable, 1: enable IEEE802.11h
 	UCHAR		CSCount;			//Channel switch counter
 	UCHAR		CSPeriod;			//Channel switch period (beacon count)
 	UCHAR		RDCount;			//Radar detection counter