x86, realmode: Remove indirect jumps in trampoline_32 and wakeup_asm

Remove indirect jumps in trampoline_32.S and the 32-bit part of
wakeup_asm.S.  There exist systems which are known to do weird
things if an SMI comes in right after a mode switch, and the
safest way to deal with it is to always follow with a simple
absolute far jump.  In the 64-bit code we then to a register
indirect near jump; follow that pattern for the 32-bit code.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1336501366-28617-14-git-send-email-jarkko.sakkinen@intel.com

arch/x86/realmode/rm/trampoline_32.S

@@ -47,24 +47,29 @@ trampoline_data:
 
 	cli			# We should be safe anyway
 
+	movl	startup_32_smp, %eax	# where we need to go
+
 	movl	$0xA5A5A5A5, trampoline_status
 				# write marker for master knows we're running
 
-	/* GDT tables in non default location kernel can be beyond 16MB and
+	/*
+	 * GDT tables in non default location kernel can be beyond 16MB and
 	 * lgdt will not be able to load the address as in real mode default
 	 * operand size is 16bit. Use lgdtl instead to force operand size
 	 * to 32 bit.
 	 */
-
 	lidtl	boot_idt_descr		# load idt with 0, 0
 	lgdtl	boot_gdt_descr		# load gdt with whatever is appropriate
 
-	xor	%ax, %ax
-	inc	%ax			# protected mode (PE) bit
-	lmsw	%ax			# into protected mode
+	movw	$1, %dx			# protected mode (PE) bit
+	lmsw	%dx			# into protected mode
 
-	# flush prefetch and jump to startup_32_smp in arch/i386/kernel/head.S
-	ljmpl	*(startup_32_smp)
+	ljmpl	$__BOOT_CS, $pa_startup_32
+
+	.section ".text32","ax"
+	.code32
+ENTRY(startup_32)			# note: also used from wakeup_asm.S
+	jmp	*%eax
 
 	.data
 	.globl startup_32_smp, boot_gdt, trampoline_status
@@ -82,5 +87,4 @@ trampoline_status:
 	.long	0
 
 startup_32_smp:
-	.long	0x00000000
-	.word	__BOOT_CS, 0
+	.long	0

arch/x86/realmode/rm/wakeup/wakeup_asm.S

@@ -124,9 +124,11 @@ wakeup_start:
 	lgdtl	pmode_gdt
 
 	/* This really couldn't... */
-	movl	pmode_cr0, %eax
-	movl	%eax, %cr0
-	ljmpl	*pmode_entry
+	movl	pmode_entry, %eax
+	movl	pmode_cr0, %ecx
+	movl	%ecx, %cr0
+	ljmpl	$__KERNEL_CS, $pa_startup_32
+	/* -> jmp *%eax in trampoline_32.S */
 #else
 	jmp	trampoline_data
 #endif