ipr: add test for MSI interrupt support

The return value from pci_enable_msi() can not always be trusted.  This patch
adds code to generate an interrupt after MSI has been enabled and tests
whether or not we can receive and process it.  If the tests fails, then fall
back to LSI.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/ipr.c

@@ -7367,6 +7367,7 @@ static void __devinit ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg,
 	INIT_LIST_HEAD(&ioa_cfg->used_res_q);
 	INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread);
 	init_waitqueue_head(&ioa_cfg->reset_wait_q);
+	init_waitqueue_head(&ioa_cfg->msi_wait_q);
 	ioa_cfg->sdt_state = INACTIVE;
 	if (ipr_enable_cache)
 		ioa_cfg->cache_state = CACHE_ENABLED;
@@ -7416,6 +7417,89 @@ ipr_get_chip_cfg(const struct pci_device_id *dev_id)
 	return NULL;
 }
 
+/**
+ * ipr_test_intr - Handle the interrupt generated in ipr_test_msi().
+ * @pdev:		PCI device struct
+ *
+ * Description: Simply set the msi_received flag to 1 indicating that
+ * Message Signaled Interrupts are supported.
+ *
+ * Return value:
+ * 	0 on success / non-zero on failure
+ **/
+static irqreturn_t __devinit ipr_test_intr(int irq, void *devp)
+{
+	struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp;
+	unsigned long lock_flags = 0;
+	irqreturn_t rc = IRQ_HANDLED;
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+
+	ioa_cfg->msi_received = 1;
+	wake_up(&ioa_cfg->msi_wait_q);
+
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+	return rc;
+}
+
+/**
+ * ipr_test_msi - Test for Message Signaled Interrupt (MSI) support.
+ * @pdev:		PCI device struct
+ *
+ * Description: The return value from pci_enable_msi() can not always be
+ * trusted.  This routine sets up and initiates a test interrupt to determine
+ * if the interrupt is received via the ipr_test_intr() service routine.
+ * If the tests fails, the driver will fall back to LSI.
+ *
+ * Return value:
+ * 	0 on success / non-zero on failure
+ **/
+static int __devinit ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg,
+				  struct pci_dev *pdev)
+{
+	int rc;
+	volatile u32 int_reg;
+	unsigned long lock_flags = 0;
+
+	ENTER;
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	init_waitqueue_head(&ioa_cfg->msi_wait_q);
+	ioa_cfg->msi_received = 0;
+	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
+	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg);
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg);
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+	rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg);
+	if (rc) {
+		dev_err(&pdev->dev, "Can not assign irq %d\n", pdev->irq);
+		return rc;
+	} else if (ipr_debug)
+		dev_info(&pdev->dev, "IRQ assigned: %d\n", pdev->irq);
+
+	writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg);
+	int_reg = readl(ioa_cfg->regs.sense_interrupt_reg);
+	wait_event_timeout(ioa_cfg->msi_wait_q, ioa_cfg->msi_received, HZ);
+	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
+
+	spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
+	if (!ioa_cfg->msi_received) {
+		/* MSI test failed */
+		dev_info(&pdev->dev, "MSI test failed.  Falling back to LSI.\n");
+		rc = -EOPNOTSUPP;
+	} else if (ipr_debug)
+		dev_info(&pdev->dev, "MSI test succeeded.\n");
+
+	spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+	free_irq(pdev->irq, ioa_cfg);
+
+	LEAVE;
+
+	return rc;
+}
+
 /**
  * ipr_probe_ioa - Allocates memory and does first stage of initialization
  * @pdev:		PCI device struct
@@ -7441,11 +7525,6 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto out;
 	}
 
-	if (!(rc = pci_enable_msi(pdev)))
-		dev_info(&pdev->dev, "MSI enabled\n");
-	else if (ipr_debug)
-		dev_info(&pdev->dev, "Cannot enable MSI\n");
-
 	dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq);
 
 	host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg));
@@ -7519,6 +7598,18 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		goto cleanup_nomem;
 	}
 
+	/* Enable MSI style interrupts if they are supported. */
+	if (!(rc = pci_enable_msi(pdev))) {
+		rc = ipr_test_msi(ioa_cfg, pdev);
+		if (rc == -EOPNOTSUPP)
+			pci_disable_msi(pdev);
+		else if (rc)
+			goto out_msi_disable;
+		else
+			dev_info(&pdev->dev, "MSI enabled with IRQ: %d\n", pdev->irq);
+	} else if (ipr_debug)
+		dev_info(&pdev->dev, "Cannot enable MSI.\n");
+
 	/* Save away PCI config space for use following IOA reset */
 	rc = pci_save_state(pdev);
 
@@ -7556,7 +7647,9 @@ static int __devinit ipr_probe_ioa(struct pci_dev *pdev,
 		ioa_cfg->ioa_unit_checked = 1;
 
 	ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER);
-	rc = request_irq(pdev->irq, ipr_isr, IRQF_SHARED, IPR_NAME, ioa_cfg);
+	rc = request_irq(pdev->irq, ipr_isr,
+			 ioa_cfg->msi_received ? 0 : IRQF_SHARED,
+			 IPR_NAME, ioa_cfg);
 
 	if (rc) {
 		dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n",
@@ -7583,12 +7676,13 @@ cleanup_nolog:
 	ipr_free_mem(ioa_cfg);
 cleanup_nomem:
 	iounmap(ipr_regs);
+out_msi_disable:
+	pci_disable_msi(pdev);
 out_release_regions:
 	pci_release_regions(pdev);
 out_scsi_host_put:
 	scsi_host_put(host);
 out_disable:
-	pci_disable_msi(pdev);
 	pci_disable_device(pdev);
 	goto out;
 }

drivers/scsi/ipr.h

@@ -37,8 +37,8 @@
 /*
  * Literals
  */
-#define IPR_DRIVER_VERSION "2.4.2"
-#define IPR_DRIVER_DATE "(January 21, 2009)"
+#define IPR_DRIVER_VERSION "2.4.3"
+#define IPR_DRIVER_DATE "(June 10, 2009)"
 
 /*
  * IPR_MAX_CMD_PER_LUN: This defines the maximum number of outstanding
@@ -1094,6 +1094,7 @@ struct ipr_ioa_cfg {
 	u8 needs_hard_reset:1;
 	u8 dual_raid:1;
 	u8 needs_warm_reset:1;
+	u8 msi_received:1;
 
 	u8 revid;
 
@@ -1179,6 +1180,7 @@ struct ipr_ioa_cfg {
 	struct work_struct work_q;
 
 	wait_queue_head_t reset_wait_q;
+	wait_queue_head_t msi_wait_q;
 
 	struct ipr_dump *dump;
 	enum ipr_sdt_state sdt_state;