浏览代码

Merge branch 'for-grant' of git://git.jdl.com/software/linux-3.0 into devicetree/next

Grant Likely 13 年之前
父节点
当前提交
9514a56753
共有 100 个文件被更改,包括 583 次插入457 次删除
  1. 13 0
      Documentation/ABI/testing/sysfs-class-scsi_host
  2. 1 84
      Documentation/cgroups/memory.txt
  3. 10 0
      Documentation/devicetree/bindings/gpio/pl061-gpio.txt
  4. 12 0
      Documentation/devicetree/bindings/spi/spi_pl022.txt
  5. 4 10
      Documentation/hwmon/coretemp
  6. 6 3
      Documentation/kernel-parameters.txt
  7. 2 1
      Documentation/networking/dmfe.txt
  8. 2 2
      Documentation/networking/ip-sysctl.txt
  9. 1 1
      Documentation/networking/scaling.txt
  10. 4 3
      Documentation/vm/transhuge.txt
  11. 20 6
      MAINTAINERS
  12. 1 1
      Makefile
  13. 1 1
      arch/alpha/Kconfig
  14. 14 0
      arch/arm/Kconfig
  15. 6 6
      arch/arm/boot/dts/tegra-harmony.dts
  16. 3 3
      arch/arm/boot/dts/tegra-seaboard.dts
  17. 17 17
      arch/arm/include/asm/futex.h
  18. 2 2
      arch/arm/include/asm/unistd.h
  19. 10 0
      arch/arm/kernel/smp_scu.c
  20. 12 3
      arch/arm/kernel/vmlinux.lds.S
  21. 1 1
      arch/arm/mach-dove/common.c
  22. 3 5
      arch/arm/mach-exynos4/clock.c
  23. 9 1
      arch/arm/mach-exynos4/mct.c
  24. 2 0
      arch/arm/mach-exynos4/platsmp.c
  25. 6 5
      arch/arm/mach-exynos4/setup-keypad.c
  26. 2 0
      arch/arm/mach-integrator/integrator_ap.c
  27. 0 2
      arch/arm/mach-integrator/pci_v3.c
  28. 1 1
      arch/arm/mach-s3c2443/clock.c
  29. 0 39
      arch/arm/mach-s3c64xx/mach-smdk6410.c
  30. 2 4
      arch/arm/mach-s5pv210/clock.c
  31. 20 0
      arch/arm/mm/cache-v7.S
  32. 2 0
      arch/arm/mm/dma-mapping.c
  33. 5 4
      arch/arm/plat-s5p/irq-gpioint.c
  34. 11 0
      arch/arm/plat-samsung/clock.c
  35. 8 0
      arch/arm/plat-samsung/include/plat/clock.h
  36. 3 7
      arch/arm/plat-samsung/include/plat/watchdog-reset.h
  37. 14 0
      arch/powerpc/platforms/powermac/pci.c
  38. 2 1
      arch/s390/include/asm/elf.h
  39. 2 0
      arch/s390/include/asm/pgtable.h
  40. 3 0
      arch/s390/kernel/asm-offsets.c
  41. 6 0
      arch/s390/kernel/entry64.S
  42. 3 2
      arch/s390/kvm/kvm-s390.c
  43. 6 11
      arch/s390/mm/pgtable.c
  44. 2 0
      arch/sparc/include/asm/spitfire.h
  45. 3 1
      arch/sparc/include/asm/xor_64.h
  46. 12 0
      arch/sparc/kernel/cpu.c
  47. 2 0
      arch/sparc/kernel/cpumap.c
  48. 22 3
      arch/sparc/kernel/head_64.S
  49. 1 2
      arch/sparc/kernel/process_32.c
  50. 0 3
      arch/sparc/kernel/process_64.c
  51. 1 1
      arch/sparc/kernel/setup_32.c
  52. 13 5
      arch/sparc/kernel/setup_64.c
  53. 5 0
      arch/sparc/mm/init_64.c
  54. 4 0
      arch/um/Kconfig.x86
  55. 1 1
      arch/um/Makefile
  56. 36 25
      arch/um/drivers/line.c
  57. 1 0
      arch/um/drivers/xterm.c
  58. 0 4
      arch/um/include/asm/ptrace-generic.h
  59. 1 0
      arch/um/include/shared/line.h
  60. 1 1
      arch/um/include/shared/registers.h
  61. 1 1
      arch/um/kernel/process.c
  62. 0 28
      arch/um/kernel/ptrace.c
  63. 8 1
      arch/um/os-Linux/registers.c
  64. 1 1
      arch/um/os-Linux/skas/mem.c
  65. 18 1
      arch/um/os-Linux/skas/process.c
  66. 0 5
      arch/um/sys-i386/asm/ptrace.h
  67. 23 5
      arch/um/sys-i386/ptrace.c
  68. 1 0
      arch/um/sys-i386/shared/sysdep/ptrace.h
  69. 8 4
      arch/um/sys-x86_64/ptrace.c
  70. 1 0
      arch/um/sys-x86_64/shared/sysdep/ptrace.h
  71. 0 1
      arch/x86/include/asm/alternative-asm.h
  72. 0 4
      arch/x86/include/asm/alternative.h
  73. 0 2
      arch/x86/include/asm/cpufeature.h
  74. 12 11
      arch/x86/kernel/rtc.c
  75. 1 1
      arch/x86/kvm/emulate.c
  76. 2 1
      arch/x86/kvm/mmu.c
  77. 9 0
      arch/x86/platform/mrst/vrtc.c
  78. 2 4
      arch/x86/xen/mmu.c
  79. 6 4
      arch/x86/xen/setup.c
  80. 0 1
      arch/x86/xen/smp.c
  81. 3 2
      arch/x86/xen/time.c
  82. 16 21
      block/blk-cgroup.c
  83. 14 14
      block/blk-core.c
  84. 1 1
      block/blk-softirq.c
  85. 11 4
      block/blk-sysfs.c
  86. 10 10
      block/cfq-iosched.c
  87. 1 1
      drivers/acpi/acpica/acconfig.h
  88. 1 0
      drivers/acpi/apei/Kconfig
  89. 1 1
      drivers/acpi/apei/apei-base.c
  90. 38 37
      drivers/base/power/clock_ops.c
  91. 4 4
      drivers/block/floppy.c
  92. 1 1
      drivers/block/xen-blkback/common.h
  93. 3 3
      drivers/block/xen-blkback/xenbus.c
  94. 6 0
      drivers/bluetooth/btusb.c
  95. 8 8
      drivers/bluetooth/btwilink.c
  96. 1 0
      drivers/char/tpm/Kconfig
  97. 8 1
      drivers/char/tpm/tpm.c
  98. 0 2
      drivers/char/tpm/tpm_nsc.c
  99. 3 0
      drivers/cpufreq/pcc-cpufreq.c
  100. 3 0
      drivers/firewire/ohci.c

+ 13 - 0
Documentation/ABI/testing/sysfs-class-scsi_host

@@ -0,0 +1,13 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.

+ 1 - 84
Documentation/cgroups/memory.txt

@@ -380,7 +380,7 @@ will be charged as a new owner of it.
 
 5.2 stat file
 
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
 
 # per-memory cgroup local status
 cache		- # of bytes of page cache memory.
@@ -438,89 +438,6 @@ Note:
 	 file_mapped is accounted only when the memory cgroup is owner of page
 	 cache.)
 
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
-  scanned_file_pages_by_limit indicates the number of scanned
-  file pages at vmscan.
-
-Now, 3 parameters are supported
-
-  scanned - the number of pages scanned by vmscan
-  rotated - the number of pages activated at vmscan
-  freed   - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
-  limit - the memory cgroup's limit
-  system - global memory pressure + softlimit
-           (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.

+ 10 - 0
Documentation/devicetree/bindings/gpio/pl061-gpio.txt

@@ -0,0 +1,10 @@
+ARM PL061 GPIO controller
+
+Required properties:
+- compatible : "arm,pl061", "arm,primecell"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters:
+  - bit 0 specifies polarity (0 for normal, 1 for inverted)
+- gpio-controller : Marks the device node as a GPIO controller.
+- interrupts : Interrupt mapping for GPIO IRQ.
+

+ 12 - 0
Documentation/devicetree/bindings/spi/spi_pl022.txt

@@ -0,0 +1,12 @@
+ARM PL022 SPI controller
+
+Required properties:
+- compatible : "arm,pl022", "arm,primecell"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+
+Optional properties:
+- cs-gpios : should specify GPIOs used for chipselects.
+  The gpios will be referred to as reg = <index> in the SPI child nodes.
+  If unspecified, a single SPI device without a chip select can be used.
+

+ 4 - 10
Documentation/hwmon/coretemp

@@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files:
 All Sysfs entries are named with their core_id (represented here by 'X').
 tempX_input	 - Core temperature (in millidegrees Celsius).
 tempX_max	 - All cooling devices should be turned on (on Core2).
-		   Initialized with IA32_THERM_INTERRUPT. When the CPU
-		   temperature reaches this temperature, an interrupt is
-		   generated and tempX_max_alarm is set.
-tempX_max_hyst   - If the CPU temperature falls below than temperature,
-		   an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm  - Set if the temperature reaches or exceeds tempX_max.
-		   Reset if the temperature drops to or below tempX_max_hyst.
 tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
 tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
@@ -49,9 +42,10 @@ tempX_label	 - Contains string "Core X", where X is processor
 		   number. For Package temp, this will be "Physical id Y",
 		   where Y is the package number.
 
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
 
 Appendix A. Known TjMax lists (TBD):
 Some information comes from ark.intel.com

+ 6 - 3
Documentation/kernel-parameters.txt

@@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
-	pnp.debug	[PNP]
-			Enable PNP debug messages.  This depends on the
-			CONFIG_PNP_DEBUG_MESSAGES option.
+	pnp.debug=1	[PNP]
+			Enable PNP debug messages (depends on the
+			CONFIG_PNP_DEBUG_MESSAGES option).  Change at run-time
+			via /sys/module/pnp/parameters/debug.  We always show
+			current resource usage; turning this on also shows
+			possible settings and some assignment information.
 
 	pnpacpi=	[ACPI]
 			{ off }

+ 2 - 1
Documentation/networking/dmfe.txt

@@ -1,3 +1,5 @@
+Note: This driver doesn't have a maintainer.
+
 Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
 
 This program is free software; you can redistribute it and/or
@@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases.
 Authors:
 
 Sten Wang <sten_wang@davicom.com.tw >   : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
 
 Contributors:
 

+ 2 - 2
Documentation/networking/ip-sysctl.txt

@@ -1042,7 +1042,7 @@ conf/interface/*:
 	The functional behaviour for certain settings is different
 	depending on whether local forwarding is enabled or not.
 
-accept_ra - BOOLEAN
+accept_ra - INTEGER
 	Accept Router Advertisements; autoconfigure using them.
 
 	Possible values are:
@@ -1106,7 +1106,7 @@ dad_transmits - INTEGER
 	The amount of Duplicate Address Detection probes to send.
 	Default: 1
 
-forwarding - BOOLEAN
+forwarding - INTEGER
 	Configure interface-specific Host/Router behaviour.
 
 	Note: It is recommended to have the same setting on all

+ 1 - 1
Documentation/networking/scaling.txt

@@ -243,7 +243,7 @@ configured. The number of entries in the global flow table is set through:
 
 The number of entries in the per-queue flow table are set through:
 
- /sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
+ /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt
 
 == Suggested Configuration
 

+ 4 - 3
Documentation/vm/transhuge.txt

@@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never".
 khugepaged runs usually at low frequency so while one may not want to
 invoke defrag algorithms synchronously during the page faults, it
 should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
 
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
 
 You can also control how many pages khugepaged should scan at each
 pass:

+ 20 - 6
MAINTAINERS

@@ -1278,7 +1278,6 @@ F:	drivers/input/misc/ati_remote2.c
 ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
-M:	Jie Yang <jie.yang@atheros.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1574,7 +1573,6 @@ F:	drivers/scsi/bfa/
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <rmody@brocade.com>
-M:	Debashis Dutt <ddutt@brocade.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bna/
@@ -1758,7 +1756,6 @@ F:	Documentation/zh_CN/
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
 S:	Supported
@@ -3262,6 +3259,17 @@ F:	Documentation/input/multi-touch-protocol.txt
 F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M:	Intel SCU Linux support <intel-linux-scu@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Dave Jiang <dave.jiang@intel.com>
+M:	Ed Nadolski <edmund.nadolski@intel.com>
+L:	linux-scsi@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S:	Maintained
+F:	drivers/scsi/isci/
+F:	firmware/isci/
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -4404,7 +4412,8 @@ L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -4719,10 +4728,12 @@ F:	drivers/i2c/busses/i2c-ocores.c
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@secretlab.ca>
+M:	Rob Herring <rob.herring@calxeda.com>
 L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
+F:	Documentation/devicetree
 F:	drivers/of
 F:	include/linux/of*.h
 K:	of_get_property
@@ -4774,7 +4785,7 @@ F:	drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
 M:	Boaz Harrosh <bharrosh@panasas.com>
-M:	Benny Halevy <bhalevy@panasas.com>
+M:	Benny Halevy <bhalevy@tonian.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
@@ -6365,7 +6376,6 @@ S:	Supported
 F:	arch/arm/mach-tegra
 
 TEHUTI ETHERNET DRIVER
-M:	Alexander Indenbaum <baum@tehutinetworks.net>
 M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -7200,6 +7210,9 @@ W:	http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/input/misc/wm831x-on.c
+F:	drivers/input/touchscreen/wm831x-ts.c
+F:	drivers/input/touchscreen/wm97*.c
 F:	drivers/mfd/wm8*.c
 F:	drivers/power/wm83*.c
 F:	drivers/rtc/rtc-wm83*.c
@@ -7209,6 +7222,7 @@ F:	drivers/watchdog/wm83*_wdt.c
 F:	include/linux/mfd/wm831x/
 F:	include/linux/mfd/wm8350/
 F:	include/linux/mfd/wm8400*
+F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*
 

+ 1 - 1
Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc9
 NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*

+ 1 - 1
arch/alpha/Kconfig

@@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE
         def_bool y
 
 config GENERIC_GPIO
-	def_bool y
+	bool
 
 config ZONE_DMA
 	bool

+ 14 - 0
arch/arm/Kconfig

@@ -1283,6 +1283,20 @@ config ARM_ERRATA_364296
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

+ 6 - 6
arch/arm/boot/dts/tegra-harmony.dts

@@ -57,14 +57,14 @@
 	};
 
 	sdhci@c8000200 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 155 0>; /* power, gpio PT3 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
 	sdhci@c8000600 {
-		gpios = <&gpio 58 0>, /* cd, gpio PH2 */
-			<&gpio 59 0>, /* wp, gpio PH3 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };

+ 3 - 3
arch/arm/boot/dts/tegra-seaboard.dts

@@ -21,8 +21,8 @@
 	};
 
 	sdhci@c8000400 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };

+ 17 - 17
arch/arm/include/asm/futex.h

@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;

+ 2 - 2
arch/arm/include/asm/unistd.h

@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */

+ 10 - 0
arch/arm/kernel/smp_scu.c

@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base)
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)

+ 12 - 3
arch/arm/kernel/vmlinux.lds.S

@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4;
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@ SECTIONS
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@ SECTIONS
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@ SECTIONS
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*

+ 1 - 1
arch/arm/mach-dove/common.c

@@ -158,7 +158,7 @@ void __init dove_spi0_init(void)
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************

+ 3 - 5
arch/arm/mach-exynos4/clock.c

@@ -899,8 +899,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +908,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
@@ -1160,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void)
 
 	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
 	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650);
+				__raw_readl(S5P_VPLL_CON1), pll_4650c);
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;

+ 9 - 1
arch/arm/mach-exynos4/mct.c

@@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs)
 	return ((cycle_t)hi << 32) | lo;
 }
 
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+	exynos4_mct_frc_start(0, 0);
+}
+
 struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= exynos4_frc_resume,
 };
 
 static void __init exynos4_clocksource_init(void)
@@ -389,9 +395,11 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
 }
 
 /* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
 	exynos4_mct_tick_init(evt);
+
+	return 0;
 }
 
 int local_timer_ack(void)

+ 2 - 0
arch/arm/mach-exynos4/platsmp.c

@@ -106,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
+
+	set_cpu_online(cpu, true);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)

+ 6 - 5
arch/arm/mach-exynos4/setup-keypad.c

@@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
 
 	if (rows > 8) {
 		/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 
 		/* Set all the necessary GPX3 pins: KP_ROW[8~] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 	} else {
 		/* Set all the necessary GPX2 pins: KP_ROW[x] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 	}
 
 	/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */

+ 2 - 0
arch/arm/mach-integrator/integrator_ap.c

@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
+#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = {
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+	vga_base = PCI_MEMORY_VADDR;
 }
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff

+ 0 - 2
arch/arm/mach-integrator/pci_v3.c

@@ -27,7 +27,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -505,7 +504,6 @@ void __init pci_v3_preinit(void)
 
 	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
-	vga_base = PCI_MEMORY_VADDR;
 
 	/*
 	 * Hook in our fault handler for PCI errors

+ 1 - 1
arch/arm/mach-s3c2443/clock.c

@@ -128,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}

+ 0 - 39
arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -262,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = {
 	.cols		= 8,
 };
 
-static int smdk6410_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPF(15), "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-	return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
-	gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 255,
-	.dft_brightness	= 255,
-	.pwm_period_ns	= 78770,
-	.init		= smdk6410_backlight_init,
-	.exit		= smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &s3c_device_timer[1].dev,
-		.platform_data	= &smdk6410_backlight_data,
-	},
-};
-
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {

+ 2 - 4
arch/arm/mach-s5pv210/clock.c

@@ -815,8 +815,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 3),
 		},
@@ -825,8 +824,7 @@ static struct clksrc_clk clksrcs[] = {
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},

+ 20 - 0
arch/arm/mm/cache-v7.S

@@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
  USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
 	add	r12, r12, r2
@@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area)
 	add	r1, r0, r1
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -247,6 +255,10 @@ v7_dma_inv_range:
 	sub	r3, r2, #1
 	tst	r0, r3
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 
 	tst	r1, r3
@@ -270,6 +282,10 @@ v7_dma_clean_range:
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
 	add	r0, r0, r2
@@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 	add	r0, r0, r2

+ 2 - 0
arch/arm/mm/dma-mapping.c

@@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+	else
+		__dma_free_buffer(page, size);
 
 	return addr;
 }

+ 5 - 4
arch/arm/plat-s5p/irq-gpioint.c

@@ -114,17 +114,18 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
-	struct s5p_gpioint_bank *bank = NULL;
+	struct s5p_gpioint_bank *b, *bank = NULL;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
 		return -ENOMEM;
 
-	list_for_each_entry(bank, &banks, list) {
-		if (group >= bank->start &&
-		    group < bank->start + bank->nr_groups)
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
 			break;
+		}
 	}
 	if (!bank)
 		return -EINVAL;

+ 11 - 0
arch/arm/plat-samsung/clock.c

@@ -64,6 +64,17 @@ static LIST_HEAD(clocks);
  */
 DEFINE_SPINLOCK(clocks_lock);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+	s3c2410_wdtclk = clk_get(NULL, "watchdog");
+	if (IS_ERR(s3c2410_wdtclk))
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
 /* enable and disable calls for use with the clk struct */
 
 static int clk_null_enable(struct clk *clk, int enable)

+ 8 - 0
arch/arm/plat-samsung/include/plat/clock.h

@@ -9,6 +9,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
 #include <linux/spinlock.h>
 #include <linux/clkdev.h>
 
@@ -121,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable);
 
 extern void s3c_pwmclk_init(void);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */

+ 3 - 7
arch/arm/plat-samsung/include/plat/watchdog-reset.h

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/clock.h>
 #include <plat/regs-watchdog.h>
 #include <mach/map.h>
 
@@ -19,17 +20,12 @@
 
 static inline void arch_wdt_reset(void)
 {
-	struct clk *wdtclk;
-
 	printk("arch_reset: attempting watchdog reset\n");
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	if (s3c2410_wdtclk)
+		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */
 	__raw_writel(0x80, S3C2410_WTCNT);

+ 14 - 0
arch/powerpc/platforms/powermac/pci.c

@@ -561,6 +561,20 @@ static struct pci_ops u4_pcie_pci_ops =
 	.write = u4_pcie_write_config,
 };
 
+static void __devinit pmac_pci_fixup_u4_of_node(struct pci_dev *dev)
+{
+	/* Apple's device-tree "hides" the root complex virtual P2P bridge
+	 * on U4. However, Linux sees it, causing the PCI <-> OF matching
+	 * code to fail to properly match devices below it. This works around
+	 * it by setting the node of the bridge to point to the PHB node,
+	 * which is not entirely correct but fixes the matching code and
+	 * doesn't break anything else. It's also the simplest possible fix.
+	 */
+	if (dev->dev.of_node == NULL)
+		dev->dev.of_node = pcibios_get_phb_of_node(dev->bus);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node);
+
 #endif /* CONFIG_PPC64 */
 
 #ifdef CONFIG_PPC32

+ 2 - 1
arch/s390/include/asm/elf.h

@@ -188,7 +188,8 @@ extern char elf_platform[];
 #define SET_PERSONALITY(ex)					\
 do {								\
 	if (personality(current->personality) != PER_LINUX32)	\
-		set_personality(PER_LINUX);			\
+		set_personality(PER_LINUX |			\
+			(current->personality & ~PER_MASK));	\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
 		set_thread_flag(TIF_31BIT);			\
 	else							\

+ 2 - 0
arch/s390/include/asm/pgtable.h

@@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste)
  * struct gmap_struct - guest address space
  * @mm: pointer to the parent mm_struct
  * @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
  * @crst_list: list of all crst tables used in the guest address space
  */
 struct gmap {
 	struct list_head list;
 	struct mm_struct *mm;
 	unsigned long *table;
+	unsigned long asce;
 	struct list_head crst_list;
 };
 

+ 3 - 0
arch/s390/kernel/asm-offsets.c

@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <asm/vdso.h>
 #include <asm/sigp.h>
+#include <asm/pgtable.h>
 
 /*
  * Make sure that the compiler is new enough. We want a compiler that
@@ -126,6 +127,7 @@ int main(void)
 	DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
 	DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
 	DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+	DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
 	DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
 	DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
 	DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
@@ -151,6 +153,7 @@ int main(void)
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
 	DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 #endif /* CONFIG_32BIT */
 	return 0;
 }

+ 6 - 0
arch/s390/kernel/entry64.S

@@ -1076,6 +1076,11 @@ sie_loop:
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 	tm	__TI_flags+7(%r14),_TIF_EXIT_SIE
 	jnz	sie_exit
+	lg	%r14,__LC_GMAP			# get gmap pointer
+	ltgr	%r14,%r14
+	jz	sie_gmap
+	lctlg	%c1,%c1,__GMAP_ASCE(%r14)	# load primary asce
+sie_gmap:
 	lg	%r14,__SF_EMPTY(%r15)		# get control block pointer
 	SPP	__SF_EMPTY(%r15)		# set guest id
 	sie	0(%r14)
@@ -1083,6 +1088,7 @@ sie_done:
 	SPP	__LC_CMF_HPP			# set host id
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 sie_exit:
+	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	ni	__TI_flags+6(%r14),255-(_TIF_SIE>>8)
 	lg	%r14,__SF_EMPTY+8(%r15)		# load guest register save area
 	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13

+ 3 - 2
arch/s390/kvm/kvm-s390.c

@@ -123,6 +123,7 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 	switch (ext) {
 	case KVM_CAP_S390_PSW:
+	case KVM_CAP_S390_GMAP:
 		r = 1;
 		break;
 	default:
@@ -263,10 +264,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
+	gmap_enable(vcpu->arch.gmap);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	gmap_disable(vcpu->arch.gmap);
 	save_fp_regs(&vcpu->arch.guest_fpregs);
 	save_access_regs(vcpu->arch.guest_acrs);
 	restore_fp_regs(&vcpu->arch.host_fpregs);
@@ -461,7 +464,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
 	local_irq_disable();
 	kvm_guest_enter();
 	local_irq_enable();
-	gmap_enable(vcpu->arch.gmap);
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
 	if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
@@ -470,7 +472,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu)
 	}
 	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
 		   vcpu->arch.sie_block->icptcode);
-	gmap_disable(vcpu->arch.gmap);
 	local_irq_disable();
 	kvm_guest_exit();
 	local_irq_enable();

+ 6 - 11
arch/s390/mm/pgtable.c

@@ -160,6 +160,8 @@ struct gmap *gmap_alloc(struct mm_struct *mm)
 	table = (unsigned long *) page_to_phys(page);
 	crst_table_init(table, _REGION1_ENTRY_EMPTY);
 	gmap->table = table;
+	gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
+		     _ASCE_USER_BITS | __pa(table);
 	list_add(&gmap->list, &mm->context.gmap_list);
 	return gmap;
 
@@ -240,10 +242,6 @@ EXPORT_SYMBOL_GPL(gmap_free);
  */
 void gmap_enable(struct gmap *gmap)
 {
-	/* Load primary space page table origin. */
-	S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
-				 _ASCE_USER_BITS | __pa(gmap->table);
-	asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
 	S390_lowcore.gmap = (unsigned long) gmap;
 }
 EXPORT_SYMBOL_GPL(gmap_enable);
@@ -254,10 +252,6 @@ EXPORT_SYMBOL_GPL(gmap_enable);
  */
 void gmap_disable(struct gmap *gmap)
 {
-	/* Load primary space page table origin. */
-	S390_lowcore.user_asce =
-		gmap->mm->context.asce_bits | __pa(gmap->mm->pgd);
-	asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
 	S390_lowcore.gmap = 0UL;
 }
 EXPORT_SYMBOL_GPL(gmap_disable);
@@ -309,15 +303,15 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
 		/* Walk the guest addr space page table */
 		table = gmap->table + (((to + off) >> 53) & 0x7ff);
 		if (*table & _REGION_ENTRY_INV)
-			return 0;
+			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 42) & 0x7ff);
 		if (*table & _REGION_ENTRY_INV)
-			return 0;
+			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 31) & 0x7ff);
 		if (*table & _REGION_ENTRY_INV)
-			return 0;
+			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 20) & 0x7ff);
 
@@ -325,6 +319,7 @@ int gmap_unmap_segment(struct gmap *gmap, unsigned long to, unsigned long len)
 		flush |= gmap_unlink_segment(gmap, table);
 		*table = _SEGMENT_ENTRY_INV;
 	}
+out:
 	up_read(&gmap->mm->mmap_sem);
 	if (flush)
 		gmap_flush_tlb(gmap);

+ 2 - 0
arch/sparc/include/asm/spitfire.h

@@ -43,6 +43,8 @@
 #define SUN4V_CHIP_NIAGARA1	0x01
 #define SUN4V_CHIP_NIAGARA2	0x02
 #define SUN4V_CHIP_NIAGARA3	0x03
+#define SUN4V_CHIP_NIAGARA4	0x04
+#define SUN4V_CHIP_NIAGARA5	0x05
 #define SUN4V_CHIP_UNKNOWN	0xff
 
 #ifndef __ASSEMBLY__

+ 3 - 1
arch/sparc/include/asm/xor_64.h

@@ -66,6 +66,8 @@ static struct xor_block_template xor_block_niagara = {
 	((tlb_type == hypervisor && \
 	  (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
 	   sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || \
-	   sun4v_chip_type == SUN4V_CHIP_NIAGARA3)) ? \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA5)) ? \
 	 &xor_block_niagara : \
 	 &xor_block_VIS)

+ 12 - 0
arch/sparc/kernel/cpu.c

@@ -481,6 +481,18 @@ static void __init sun4v_cpu_probe(void)
 		sparc_pmu_type = "niagara3";
 		break;
 
+	case SUN4V_CHIP_NIAGARA4:
+		sparc_cpu_type = "UltraSparc T4 (Niagara4)";
+		sparc_fpu_type = "UltraSparc T4 integrated FPU";
+		sparc_pmu_type = "niagara4";
+		break;
+
+	case SUN4V_CHIP_NIAGARA5:
+		sparc_cpu_type = "UltraSparc T5 (Niagara5)";
+		sparc_fpu_type = "UltraSparc T5 integrated FPU";
+		sparc_pmu_type = "niagara5";
+		break;
+
 	default:
 		printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
 		       prom_cpu_compatible);

+ 2 - 0
arch/sparc/kernel/cpumap.c

@@ -325,6 +325,8 @@ static int iterate_cpu(struct cpuinfo_tree *t, unsigned int root_index)
 	case SUN4V_CHIP_NIAGARA1:
 	case SUN4V_CHIP_NIAGARA2:
 	case SUN4V_CHIP_NIAGARA3:
+	case SUN4V_CHIP_NIAGARA4:
+	case SUN4V_CHIP_NIAGARA5:
 		rover_inc_table = niagara_iterate_method;
 		break;
 	default:

+ 22 - 3
arch/sparc/kernel/head_64.S

@@ -133,7 +133,7 @@ prom_sun4v_name:
 prom_niagara_prefix:
 	.asciz	"SUNW,UltraSPARC-T"
 prom_sparc_prefix:
-	.asciz	"SPARC-T"
+	.asciz	"SPARC-"
 	.align	4
 prom_root_compatible:
 	.skip	64
@@ -396,7 +396,7 @@ sun4v_chip_type:
 	or	%g1, %lo(prom_cpu_compatible), %g1
 	sethi	%hi(prom_sparc_prefix), %g7
 	or	%g7, %lo(prom_sparc_prefix), %g7
-	mov	7, %g3
+	mov	6, %g3
 90:	ldub	[%g7], %g2
 	ldub	[%g1], %g4
 	cmp	%g2, %g4
@@ -408,10 +408,23 @@ sun4v_chip_type:
 
 	sethi	%hi(prom_cpu_compatible), %g1
 	or	%g1, %lo(prom_cpu_compatible), %g1
-	ldub	[%g1 + 7], %g2
+	ldub	[%g1 + 6], %g2
+	cmp	%g2, 'T'
+	be,pt	%xcc, 70f
+	 cmp	%g2, 'M'
+	bne,pn	%xcc, 4f
+	 nop
+
+70:	ldub	[%g1 + 7], %g2
 	cmp	%g2, '3'
 	be,pt	%xcc, 5f
 	 mov	SUN4V_CHIP_NIAGARA3, %g4
+	cmp	%g2, '4'
+	be,pt	%xcc, 5f
+	 mov	SUN4V_CHIP_NIAGARA4, %g4
+	cmp	%g2, '5'
+	be,pt	%xcc, 5f
+	 mov	SUN4V_CHIP_NIAGARA5, %g4
 	ba,pt	%xcc, 4f
 	 nop
 
@@ -543,6 +556,12 @@ niagara_tlb_fixup:
 	be,pt	%xcc, niagara2_patch
 	 nop
 	cmp	%g1, SUN4V_CHIP_NIAGARA3
+	be,pt	%xcc, niagara2_patch
+	 nop
+	cmp	%g1, SUN4V_CHIP_NIAGARA4
+	be,pt	%xcc, niagara2_patch
+	 nop
+	cmp	%g1, SUN4V_CHIP_NIAGARA5
 	be,pt	%xcc, niagara2_patch
 	 nop
 

+ 1 - 2
arch/sparc/kernel/process_32.c

@@ -380,8 +380,7 @@ void flush_thread(void)
 #endif
 	}
 
-	/* Now, this task is no longer a kernel thread. */
-	current->thread.current_ds = USER_DS;
+	/* This task is no longer a kernel thread. */
 	if (current->thread.flags & SPARC_FLAG_KTHREAD) {
 		current->thread.flags &= ~SPARC_FLAG_KTHREAD;
 

+ 0 - 3
arch/sparc/kernel/process_64.c

@@ -368,9 +368,6 @@ void flush_thread(void)
 
 	/* Clear FPU register state. */
 	t->fpsaved[0] = 0;
-	
-	if (get_thread_current_ds() != ASI_AIUS)
-		set_fs(USER_DS);
 }
 
 /* It's a bit more tricky when 64-bit tasks are involved... */

+ 1 - 1
arch/sparc/kernel/setup_32.c

@@ -137,7 +137,7 @@ static void __init process_switch(char c)
 		prom_halt();
 		break;
 	case 'p':
-		/* Just ignore, this behavior is now the default.  */
+		prom_early_console.flags &= ~CON_BOOT;
 		break;
 	default:
 		printk("Unknown boot switch (-%c)\n", c);

+ 13 - 5
arch/sparc/kernel/setup_64.c

@@ -106,7 +106,7 @@ static void __init process_switch(char c)
 		prom_halt();
 		break;
 	case 'p':
-		/* Just ignore, this behavior is now the default.  */
+		prom_early_console.flags &= ~CON_BOOT;
 		break;
 	case 'P':
 		/* Force UltraSPARC-III P-Cache on. */
@@ -425,10 +425,14 @@ static void __init init_sparc64_elf_hwcap(void)
 	else if (tlb_type == hypervisor) {
 		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 			cap |= HWCAP_SPARC_BLKINIT;
 		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 			cap |= HWCAP_SPARC_N2;
 	}
 
@@ -452,11 +456,15 @@ static void __init init_sparc64_elf_hwcap(void)
 			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1)
 				cap |= AV_SPARC_ASI_BLK_INIT;
 			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
-			    sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 				cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 |
 					AV_SPARC_ASI_BLK_INIT |
 					AV_SPARC_POPC);
-			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 				cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC |
 					AV_SPARC_FMAF);
 		}

+ 5 - 0
arch/sparc/mm/init_64.c

@@ -511,6 +511,11 @@ static void __init read_obp_translations(void)
 		for (i = 0; i < prom_trans_ents; i++)
 			prom_trans[i].data &= ~0x0003fe0000000000UL;
 	}
+
+	/* Force execute bit on.  */
+	for (i = 0; i < prom_trans_ents; i++)
+		prom_trans[i].data |= (tlb_type == hypervisor ?
+				       _PAGE_EXEC_4V : _PAGE_EXEC_4U);
 }
 
 static void __init hypervisor_tlb_lock(unsigned long vaddr,

+ 4 - 0
arch/um/Kconfig.x86

@@ -10,6 +10,10 @@ config CMPXCHG_LOCAL
 	bool
 	default n
 
+config CMPXCHG_DOUBLE
+	bool
+	default n
+
 source "arch/x86/Kconfig.cpu"
 
 endmenu

+ 1 - 1
arch/um/Makefile

@@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH)
 KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
 	$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap	\
 	-Din6addr_loopback=kernel_in6addr_loopback \
-	-Din6addr_any=kernel_in6addr_any
+	-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
 
 KBUILD_AFLAGS += $(ARCH_INCLUDE)
 

+ 36 - 25
arch/um/drivers/line.c

@@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data)
  * is done under a spinlock.  Checking whether the device is in use is
  * line->tty->count > 1, also under the spinlock.
  *
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host.  If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host.  If it's equal to 0, then we are doing the
  * first open or last close.  Otherwise, open and close just return.
  */
 
@@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty)
 		goto out_unlock;
 
 	err = 0;
-	if (tty->count > 1)
+	if (line->count++)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
+	BUG_ON(tty->driver_data);
 	tty->driver_data = line;
 	line->tty = tty;
 
+	spin_unlock(&line->count_lock);
 	err = enable_chan(line);
-	if (err)
+	if (err) /* line_close() will be called by our caller */
 		return err;
 
 	INIT_DELAYED_WORK(&line->task, line_timer_cb);
@@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty)
 	chan_window_size(&line->chan_list, &tty->winsize.ws_row,
 			 &tty->winsize.ws_col);
 
-	return err;
+	return 0;
 
 out_unlock:
 	spin_unlock(&line->count_lock);
@@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp)
 	flush_buffer(line);
 
 	spin_lock(&line->count_lock);
-	if (!line->valid)
-		goto out_unlock;
+	BUG_ON(!line->valid);
 
-	if (tty->count > 1)
+	if (--line->count)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
 	line->tty = NULL;
 	tty->driver_data = NULL;
 
+	spin_unlock(&line->count_lock);
+
 	if (line->sigio) {
 		unregister_winch(tty);
 		line->sigio = 0;
@@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio,
 
 	spin_lock(&line->count_lock);
 
-	if (line->tty != NULL) {
+	if (line->count) {
 		*error_out = "Device is already open";
 		goto out;
 	}
@@ -722,41 +721,53 @@ struct winch {
 	int pid;
 	struct tty_struct *tty;
 	unsigned long stack;
+	struct work_struct work;
 };
 
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
 {
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
-
-	list_del(&winch->list);
+	struct winch *winch = container_of(work, struct winch, work);
+	free_irq(WINCH_IRQ, winch);
 
 	if (winch->pid != -1)
 		os_kill_process(winch->pid, 1);
-	if (winch->fd != -1)
-		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
 	kfree(winch);
 }
 
+static void free_winch(struct winch *winch)
+{
+	int fd = winch->fd;
+	winch->fd = -1;
+	if (fd != -1)
+		os_close_file(fd);
+	list_del(&winch->list);
+	__free_winch(&winch->work);
+}
+
 static irqreturn_t winch_interrupt(int irq, void *data)
 {
 	struct winch *winch = data;
 	struct tty_struct *tty;
 	struct line *line;
+	int fd = winch->fd;
 	int err;
 	char c;
 
-	if (winch->fd != -1) {
-		err = generic_read(winch->fd, &c, NULL);
+	if (fd != -1) {
+		err = generic_read(fd, &c, NULL);
 		if (err < 0) {
 			if (err != -EAGAIN) {
+				winch->fd = -1;
+				list_del(&winch->list);
+				os_close_file(fd);
 				printk(KERN_ERR "winch_interrupt : "
 				       "read failed, errno = %d\n", -err);
 				printk(KERN_ERR "fd %d is losing SIGWINCH "
 				       "support\n", winch->tty_fd);
-				free_winch(winch, 0);
+				INIT_WORK(&winch->work, __free_winch);
+				schedule_work(&winch->work);
 				return IRQ_HANDLED;
 			}
 			goto out;
@@ -828,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty)
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
 		if (winch->tty == tty) {
-			free_winch(winch, 1);
+			free_winch(winch);
 			break;
 		}
 	}
@@ -844,7 +855,7 @@ static void winch_cleanup(void)
 
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
-		free_winch(winch, 1);
+		free_winch(winch);
 	}
 
 	spin_unlock(&winch_handler_lock);

+ 1 - 0
arch/um/drivers/xterm.c

@@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d,
 		err = -errno;
 		printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
 		       errno);
+		close(fd);
 		return err;
 	}
 	close(fd);

+ 0 - 4
arch/um/include/asm/ptrace-generic.h

@@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request,
 	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
 
 extern int arch_copy_tls(struct task_struct *new);
 extern void clear_flushed_tls(struct task_struct *task);

+ 1 - 0
arch/um/include/shared/line.h

@@ -33,6 +33,7 @@ struct line_driver {
 struct line {
 	struct tty_struct *tty;
 	spinlock_t count_lock;
+	unsigned long count;
 	int valid;
 
 	char *init_str;

+ 1 - 1
arch/um/include/shared/registers.h

@@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs);
 extern int save_registers(int pid, struct uml_pt_regs *regs);
 extern int restore_registers(int pid, struct uml_pt_regs *regs);
 extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
 extern int get_fp_registers(int pid, unsigned long *regs);
 extern int put_fp_registers(int pid, unsigned long *regs);

+ 1 - 1
arch/um/kernel/process.c

@@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
 		arch_copy_thread(&current->thread.arch, &p->thread.arch);
 	}
 	else {
-		get_safe_registers(p->thread.regs.regs.gp);
+		get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
 		p->thread.request.u.thread = current->thread.request.u.thread;
 		handler = new_thread_handler;
 	}

+ 0 - 28
arch/um/kernel/ptrace.c

@@ -50,23 +50,11 @@ long arch_ptrace(struct task_struct *child, long request,
 	void __user *vp = p;
 
 	switch (request) {
-	/* read word at location addr. */
-	case PTRACE_PEEKTEXT:
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR:
 		ret = peek_user(child, addr, data);
 		break;
 
-	/* write the word at location addr. */
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	/* write the word at location addr in the USER area */
 	case PTRACE_POKEUSR:
 		ret = poke_user(child, addr, data);
@@ -106,16 +94,6 @@ long arch_ptrace(struct task_struct *child, long request,
 		ret = 0;
 		break;
 	}
-#endif
-#ifdef PTRACE_GETFPREGS
-	case PTRACE_GETFPREGS: /* Get the child FPU state. */
-		ret = get_fpregs(vp, child);
-		break;
-#endif
-#ifdef PTRACE_SETFPREGS
-	case PTRACE_SETFPREGS: /* Set the child FPU state. */
-		ret = set_fpregs(vp, child);
-		break;
 #endif
 	case PTRACE_GET_THREAD_AREA:
 		ret = ptrace_get_thread_area(child, addr, vp);
@@ -153,12 +131,6 @@ long arch_ptrace(struct task_struct *child, long request,
 		ret = -EIO;
 		break;
 	}
-#endif
-#ifdef PTRACE_ARCH_PRCTL
-	case PTRACE_ARCH_PRCTL:
-		/* XXX Calls ptrace on the host - needs some SMP thinking */
-		ret = arch_prctl(child, data, (void __user *) addr);
-		break;
 #endif
 	default:
 		ret = ptrace_request(child, request, addr, data);

+ 8 - 1
arch/um/os-Linux/registers.c

@@ -8,6 +8,8 @@
 #include <string.h>
 #include <sys/ptrace.h>
 #include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "registers.h"
 
 int save_registers(int pid, struct uml_pt_regs *regs)
 {
@@ -32,6 +34,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs)
 /* This is set once at boot time and not changed thereafter */
 
 static unsigned long exec_regs[MAX_REG_NR];
+static unsigned long exec_fp_regs[FP_SIZE];
 
 int init_registers(int pid)
 {
@@ -42,10 +45,14 @@ int init_registers(int pid)
 		return -errno;
 
 	arch_init_registers(pid);
+	get_fp_registers(pid, exec_fp_regs);
 	return 0;
 }
 
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
 {
 	memcpy(regs, exec_regs, sizeof(exec_regs));
+
+	if (fp_regs)
+		memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs));
 }

+ 1 - 1
arch/um/os-Linux/skas/mem.c

@@ -39,7 +39,7 @@ static unsigned long syscall_regs[MAX_REG_NR];
 
 static int __init init_syscall_regs(void)
 {
-	get_safe_registers(syscall_regs);
+	get_safe_registers(syscall_regs, NULL);
 	syscall_regs[REGS_IP_INDEX] = STUB_CODE +
 		((unsigned long) &batch_syscall_stub -
 		 (unsigned long) &__syscall_stub_start);

+ 18 - 1
arch/um/os-Linux/skas/process.c

@@ -373,6 +373,9 @@ void userspace(struct uml_pt_regs *regs)
 		if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
 			fatal_sigsegv();
 
+		if (put_fp_registers(pid, regs->fp))
+			fatal_sigsegv();
+
 		/* Now we set local_using_sysemu to be used for one loop */
 		local_using_sysemu = get_using_sysemu();
 
@@ -399,6 +402,12 @@ void userspace(struct uml_pt_regs *regs)
 			fatal_sigsegv();
 		}
 
+		if (get_fp_registers(pid, regs->fp)) {
+			printk(UM_KERN_ERR "userspace -  get_fp_registers failed, "
+			       "errno = %d\n", errno);
+			fatal_sigsegv();
+		}
+
 		UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
 
 		if (WIFSTOPPED(status)) {
@@ -457,10 +466,11 @@ void userspace(struct uml_pt_regs *regs)
 }
 
 static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[FP_SIZE];
 
 static int __init init_thread_regs(void)
 {
-	get_safe_registers(thread_regs);
+	get_safe_registers(thread_regs, thread_fp_regs);
 	/* Set parent's instruction pointer to start of clone-stub */
 	thread_regs[REGS_IP_INDEX] = STUB_CODE +
 				(unsigned long) stub_clone_handler -
@@ -503,6 +513,13 @@ int copy_context_skas0(unsigned long new_stack, int pid)
 		return err;
 	}
 
+	err = put_fp_registers(pid, thread_fp_regs);
+	if (err < 0) {
+		printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers "
+		       "failed, pid = %d, err = %d\n", pid, err);
+		return err;
+	}
+
 	/* set a well known return code for detection of child write failure */
 	child_data->err = 12345678;
 

+ 0 - 5
arch/um/sys-i386/asm/ptrace.h

@@ -42,11 +42,6 @@
  */
 struct user_desc;
 
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *tsk);
-
 extern int ptrace_get_thread_area(struct task_struct *child, int idx,
                                   struct user_desc __user *user_desc);
 

+ 23 - 5
arch/um/sys-i386/ptrace.c

@@ -145,7 +145,7 @@ int peek_user(struct task_struct *child, long addr, long data)
 	return put_user(tmp, (unsigned long __user *) data);
 }
 
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_i387_struct fpregs;
@@ -161,7 +161,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 	return n;
 }
 
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_i387_struct fpregs;
@@ -174,7 +174,7 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 				    (unsigned long *) &fpregs);
 }
 
-int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_fxsr_struct fpregs;
@@ -190,7 +190,7 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 	return n;
 }
 
-int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_fxsr_struct fpregs;
@@ -206,5 +206,23 @@ int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 long subarch_ptrace(struct task_struct *child, long request,
 		    unsigned long addr, unsigned long data)
 {
-	return -EIO;
+	int ret = -EIO;
+	void __user *datap = (void __user *) data;
+	switch (request) {
+	case PTRACE_GETFPREGS: /* Get the child FPU state. */
+		ret = get_fpregs(datap, child);
+		break;
+	case PTRACE_SETFPREGS: /* Set the child FPU state. */
+		ret = set_fpregs(datap, child);
+		break;
+	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+		ret = get_fpxregs(datap, child);
+		break;
+	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+		ret = set_fpxregs(datap, child);
+		break;
+	default:
+		ret = -EIO;
+	}
+	return ret;
 }

+ 1 - 0
arch/um/sys-i386/shared/sysdep/ptrace.h

@@ -53,6 +53,7 @@ extern int sysemu_supported;
 
 struct uml_pt_regs {
 	unsigned long gp[MAX_REG_NR];
+	unsigned long fp[HOST_FPX_SIZE];
 	struct faultinfo faultinfo;
 	long syscall;
 	int is_user;

+ 8 - 4
arch/um/sys-x86_64/ptrace.c

@@ -145,7 +145,7 @@ int is_syscall(unsigned long addr)
 	return instr == 0x050f;
 }
 
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	long fpregs[HOST_FP_SIZE];
@@ -162,7 +162,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 	return n;
 }
 
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	long fpregs[HOST_FP_SIZE];
@@ -182,12 +182,16 @@ long subarch_ptrace(struct task_struct *child, long request,
 	void __user *datap = (void __user *) data;
 
 	switch (request) {
-	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+	case PTRACE_GETFPREGS: /* Get the child FPU state. */
 		ret = get_fpregs(datap, child);
 		break;
-	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+	case PTRACE_SETFPREGS: /* Set the child FPU state. */
 		ret = set_fpregs(datap, child);
 		break;
+	case PTRACE_ARCH_PRCTL:
+		/* XXX Calls ptrace on the host - needs some SMP thinking */
+		ret = arch_prctl(child, data, (void __user *) addr);
+		break;
 	}
 
 	return ret;

+ 1 - 0
arch/um/sys-x86_64/shared/sysdep/ptrace.h

@@ -85,6 +85,7 @@
 
 struct uml_pt_regs {
 	unsigned long gp[MAX_REG_NR];
+	unsigned long fp[HOST_FP_SIZE];
 	struct faultinfo faultinfo;
 	long syscall;
 	int is_user;

+ 0 - 1
arch/x86/include/asm/alternative-asm.h

@@ -16,7 +16,6 @@
 #endif
 
 .macro altinstruction_entry orig alt feature orig_len alt_len
-	.align 8
 	.long \orig - .
 	.long \alt - .
 	.word \feature

+ 0 - 4
arch/x86/include/asm/alternative.h

@@ -48,9 +48,6 @@ struct alt_instr {
 	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-#ifdef CONFIG_X86_64
-	u32 pad2;
-#endif
 };
 
 extern void alternative_instructions(void);
@@ -83,7 +80,6 @@ static inline int alternatives_text_reserved(void *start, void *end)
 									\
       "661:\n\t" oldinstr "\n662:\n"					\
       ".section .altinstructions,\"a\"\n"				\
-      _ASM_ALIGN "\n"							\
       "	 .long 661b - .\n"			/* label           */	\
       "	 .long 663f - .\n"			/* new instruction */	\
       "	 .word " __stringify(feature) "\n"	/* feature bit     */	\

+ 0 - 2
arch/x86/include/asm/cpufeature.h

@@ -332,7 +332,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 		asm goto("1: jmp %l[t_no]\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
-			 _ASM_ALIGN "\n"
 			 " .long 1b - .\n"
 			 " .long 0\n"		/* no replacement */
 			 " .word %P0\n"		/* feature bit */
@@ -350,7 +349,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit)
 		asm volatile("1: movb $0,%0\n"
 			     "2:\n"
 			     ".section .altinstructions,\"a\"\n"
-			     _ASM_ALIGN "\n"
 			     " .long 1b - .\n"
 			     " .long 3f - .\n"
 			     " .word %P1\n"		/* feature bit */

+ 12 - 11
arch/x86/kernel/rtc.c

@@ -42,8 +42,11 @@ int mach_set_rtc_mmss(unsigned long nowtime)
 {
 	int real_seconds, real_minutes, cmos_minutes;
 	unsigned char save_control, save_freq_select;
+	unsigned long flags;
 	int retval = 0;
 
+	spin_lock_irqsave(&rtc_lock, flags);
+
 	 /* tell the clock it's being set */
 	save_control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
@@ -93,12 +96,17 @@ int mach_set_rtc_mmss(unsigned long nowtime)
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
 
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return retval;
 }
 
 unsigned long mach_get_cmos_time(void)
 {
 	unsigned int status, year, mon, day, hour, min, sec, century = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	/*
 	 * If UIP is clear, then we have >= 244 microseconds before
@@ -125,6 +133,8 @@ unsigned long mach_get_cmos_time(void)
 	status = CMOS_READ(RTC_CONTROL);
 	WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
 
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
 		sec = bcd2bin(sec);
 		min = bcd2bin(min);
@@ -169,24 +179,15 @@ EXPORT_SYMBOL(rtc_cmos_write);
 
 int update_persistent_clock(struct timespec now)
 {
-	unsigned long flags;
-	int retval;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	retval = x86_platform.set_wallclock(now.tv_sec);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return retval;
+	return x86_platform.set_wallclock(now.tv_sec);
 }
 
 /* not static: needed by APM */
 void read_persistent_clock(struct timespec *ts)
 {
-	unsigned long retval, flags;
+	unsigned long retval;
 
-	spin_lock_irqsave(&rtc_lock, flags);
 	retval = x86_platform.get_wallclock();
-	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	ts->tv_sec = retval;
 	ts->tv_nsec = 0;

+ 1 - 1
arch/x86/kvm/emulate.c

@@ -3603,7 +3603,7 @@ done_prefixes:
 		break;
 	case Src2CL:
 		ctxt->src2.bytes = 1;
-		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
 		break;
 	case Src2ImmByte:
 		rc = decode_imm(ctxt, &ctxt->src2, 1, true);

+ 2 - 1
arch/x86/kvm/mmu.c

@@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
 
 	/* xchg acts as a barrier before the setting of the high bits */
 	orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
-	orig.spte_high = ssptep->spte_high = sspte.spte_high;
+	orig.spte_high = ssptep->spte_high;
+	ssptep->spte_high = sspte.spte_high;
 	count_spte_clear(sptep, spte);
 
 	return orig.spte;

+ 9 - 0
arch/x86/platform/mrst/vrtc.c

@@ -58,8 +58,11 @@ EXPORT_SYMBOL_GPL(vrtc_cmos_write);
 unsigned long vrtc_get_time(void)
 {
 	u8 sec, min, hour, mday, mon;
+	unsigned long flags;
 	u32 year;
 
+	spin_lock_irqsave(&rtc_lock, flags);
+
 	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
 		cpu_relax();
 
@@ -70,6 +73,8 @@ unsigned long vrtc_get_time(void)
 	mon = vrtc_cmos_read(RTC_MONTH);
 	year = vrtc_cmos_read(RTC_YEAR);
 
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	/* vRTC YEAR reg contains the offset to 1960 */
 	year += 1960;
 
@@ -83,8 +88,10 @@ unsigned long vrtc_get_time(void)
 int vrtc_set_mmss(unsigned long nowtime)
 {
 	int real_sec, real_min;
+	unsigned long flags;
 	int vrtc_min;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	vrtc_min = vrtc_cmos_read(RTC_MINUTES);
 
 	real_sec = nowtime % 60;
@@ -95,6 +102,8 @@ int vrtc_set_mmss(unsigned long nowtime)
 
 	vrtc_cmos_write(real_sec, RTC_SECONDS);
 	vrtc_cmos_write(real_min, RTC_MINUTES);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return 0;
 }
 

+ 2 - 4
arch/x86/xen/mmu.c

@@ -1721,10 +1721,8 @@ void __init xen_setup_machphys_mapping(void)
 		machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
 	}
 #ifdef CONFIG_X86_32
-	if ((machine_to_phys_mapping + machine_to_phys_nr)
-	    < machine_to_phys_mapping)
-		machine_to_phys_nr = (unsigned long *)NULL
-				     - machine_to_phys_mapping;
+	WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
+		< machine_to_phys_mapping);
 #endif
 }
 

+ 6 - 4
arch/x86/xen/setup.c

@@ -306,10 +306,12 @@ char * __init xen_memory_setup(void)
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
 	extra_limit = xen_get_max_pages();
-	if (extra_limit >= max_pfn)
-		extra_pages = extra_limit - max_pfn;
-	else
-		extra_pages = 0;
+	if (max_pfn + extra_pages > extra_limit) {
+		if (extra_limit > max_pfn)
+			extra_pages = extra_limit - max_pfn;
+		else
+			extra_pages = 0;
+	}
 
 	extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
 

+ 0 - 1
arch/x86/xen/smp.c

@@ -532,7 +532,6 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus)
 	WARN_ON(xen_smp_intr_init(0));
 
 	xen_init_lock_cpu(0);
-	xen_init_spinlocks();
 }
 
 static int __cpuinit xen_hvm_cpu_up(unsigned int cpu)

+ 3 - 2
arch/x86/xen/time.c

@@ -168,9 +168,10 @@ cycle_t xen_clocksource_read(void)
         struct pvclock_vcpu_time_info *src;
 	cycle_t ret;
 
-	src = &get_cpu_var(xen_vcpu)->time;
+	preempt_disable_notrace();
+	src = &__get_cpu_var(xen_vcpu)->time;
 	ret = pvclock_clocksource_read(src);
-	put_cpu_var(xen_vcpu);
+	preempt_enable_notrace();
 	return ret;
 }
 

+ 16 - 21
block/blk-cgroup.c

@@ -785,10 +785,10 @@ static int blkio_policy_parse_and_set(char *buf,
 {
 	char *s[4], *p, *major_s = NULL, *minor_s = NULL;
 	int ret;
-	unsigned long major, minor, temp;
+	unsigned long major, minor;
 	int i = 0;
 	dev_t dev;
-	u64 bps, iops;
+	u64 temp;
 
 	memset(s, 0, sizeof(s));
 
@@ -826,20 +826,23 @@ static int blkio_policy_parse_and_set(char *buf,
 
 	dev = MKDEV(major, minor);
 
-	ret = blkio_check_dev_num(dev);
+	ret = strict_strtoull(s[1], 10, &temp);
 	if (ret)
-		return ret;
+		return -EINVAL;
 
-	newpn->dev = dev;
+	/* For rule removal, do not check for device presence. */
+	if (temp) {
+		ret = blkio_check_dev_num(dev);
+		if (ret)
+			return ret;
+	}
 
-	if (s[1] == NULL)
-		return -EINVAL;
+	newpn->dev = dev;
 
 	switch (plid) {
 	case BLKIO_POLICY_PROP:
-		ret = strict_strtoul(s[1], 10, &temp);
-		if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) ||
-			temp > BLKIO_WEIGHT_MAX)
+		if ((temp < BLKIO_WEIGHT_MIN && temp > 0) ||
+		     temp > BLKIO_WEIGHT_MAX)
 			return -EINVAL;
 
 		newpn->plid = plid;
@@ -850,26 +853,18 @@ static int blkio_policy_parse_and_set(char *buf,
 		switch(fileid) {
 		case BLKIO_THROTL_read_bps_device:
 		case BLKIO_THROTL_write_bps_device:
-			ret = strict_strtoull(s[1], 10, &bps);
-			if (ret)
-				return -EINVAL;
-
 			newpn->plid = plid;
 			newpn->fileid = fileid;
-			newpn->val.bps = bps;
+			newpn->val.bps = temp;
 			break;
 		case BLKIO_THROTL_read_iops_device:
 		case BLKIO_THROTL_write_iops_device:
-			ret = strict_strtoull(s[1], 10, &iops);
-			if (ret)
-				return -EINVAL;
-
-			if (iops > THROTL_IOPS_MAX)
+			if (temp > THROTL_IOPS_MAX)
 				return -EINVAL;
 
 			newpn->plid = plid;
 			newpn->fileid = fileid;
-			newpn->val.iops = (unsigned int)iops;
+			newpn->val.iops = (unsigned int)temp;
 			break;
 		}
 		break;

+ 14 - 14
block/blk-core.c

@@ -348,9 +348,10 @@ void blk_put_queue(struct request_queue *q)
 EXPORT_SYMBOL(blk_put_queue);
 
 /*
- * Note: If a driver supplied the queue lock, it should not zap that lock
- * unexpectedly as some queue cleanup components like elevator_exit() and
- * blk_throtl_exit() need queue lock.
+ * Note: If a driver supplied the queue lock, it is disconnected
+ * by this function. The actual state of the lock doesn't matter
+ * here as the request_queue isn't accessible after this point
+ * (QUEUE_FLAG_DEAD is set) and no other requests will be queued.
  */
 void blk_cleanup_queue(struct request_queue *q)
 {
@@ -367,10 +368,8 @@ void blk_cleanup_queue(struct request_queue *q)
 	queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
 	mutex_unlock(&q->sysfs_lock);
 
-	if (q->elevator)
-		elevator_exit(q->elevator);
-
-	blk_throtl_exit(q);
+	if (q->queue_lock != &q->__queue_lock)
+		q->queue_lock = &q->__queue_lock;
 
 	blk_put_queue(q);
 }
@@ -1167,7 +1166,7 @@ static bool bio_attempt_front_merge(struct request_queue *q,
  * true if merge was successful, otherwise false.
  */
 static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
-			       struct bio *bio)
+			       struct bio *bio, unsigned int *request_count)
 {
 	struct blk_plug *plug;
 	struct request *rq;
@@ -1176,10 +1175,13 @@ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
 	plug = tsk->plug;
 	if (!plug)
 		goto out;
+	*request_count = 0;
 
 	list_for_each_entry_reverse(rq, &plug->list, queuelist) {
 		int el_ret;
 
+		(*request_count)++;
+
 		if (rq->q != q)
 			continue;
 
@@ -1219,6 +1221,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	struct blk_plug *plug;
 	int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
 	struct request *req;
+	unsigned int request_count = 0;
 
 	/*
 	 * low level driver can indicate that it wants pages above a
@@ -1237,7 +1240,7 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 	 * Check if we can merge with the plugged list before grabbing
 	 * any locks.
 	 */
-	if (attempt_plug_merge(current, q, bio))
+	if (attempt_plug_merge(current, q, bio, &request_count))
 		goto out;
 
 	spin_lock_irq(q->queue_lock);
@@ -1302,11 +1305,10 @@ get_rq:
 			if (__rq->q != q)
 				plug->should_sort = 1;
 		}
+		if (request_count >= BLK_MAX_REQUEST_COUNT)
+			blk_flush_plug_list(plug, false);
 		list_add_tail(&req->queuelist, &plug->list);
-		plug->count++;
 		drive_stat_acct(req, 1);
-		if (plug->count >= BLK_MAX_REQUEST_COUNT)
-			blk_flush_plug_list(plug, false);
 	} else {
 		spin_lock_irq(q->queue_lock);
 		add_acct_request(q, req, where);
@@ -2634,7 +2636,6 @@ void blk_start_plug(struct blk_plug *plug)
 	INIT_LIST_HEAD(&plug->list);
 	INIT_LIST_HEAD(&plug->cb_list);
 	plug->should_sort = 0;
-	plug->count = 0;
 
 	/*
 	 * If this is a nested plug, don't actually assign it. It will be
@@ -2718,7 +2719,6 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)
 		return;
 
 	list_splice_init(&plug->list, &list);
-	plug->count = 0;
 
 	if (plug->should_sort) {
 		list_sort(NULL, &list, plug_rq_cmp);

+ 1 - 1
block/blk-softirq.c

@@ -115,7 +115,7 @@ void __blk_complete_request(struct request *req)
 	/*
 	 * Select completion CPU
 	 */
-	if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) {
+	if (req->cpu != -1) {
 		ccpu = req->cpu;
 		if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) {
 			ccpu = blk_cpu_to_group(ccpu);

+ 11 - 4
block/blk-sysfs.c

@@ -258,11 +258,13 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
 
 	ret = queue_var_store(&val, page, count);
 	spin_lock_irq(q->queue_lock);
-	if (val) {
+	if (val == 2) {
 		queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
-		if (val == 2)
-			queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
-	} else {
+		queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
+	} else if (val == 1) {
+		queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
+		queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
+	} else if (val == 0) {
 		queue_flag_clear(QUEUE_FLAG_SAME_COMP, q);
 		queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
 	}
@@ -477,6 +479,11 @@ static void blk_release_queue(struct kobject *kobj)
 
 	blk_sync_queue(q);
 
+	if (q->elevator)
+		elevator_exit(q->elevator);
+
+	blk_throtl_exit(q);
+
 	if (rl->rq_pool)
 		mempool_destroy(rl->rq_pool);
 

+ 10 - 10
block/cfq-iosched.c

@@ -130,8 +130,8 @@ struct cfq_queue {
 	unsigned long slice_end;
 	long slice_resid;
 
-	/* pending metadata requests */
-	int meta_pending;
+	/* pending priority requests */
+	int prio_pending;
 	/* number of requests that are on the dispatch list or inside driver */
 	int dispatched;
 
@@ -684,8 +684,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2,
 	if (rq_is_sync(rq1) != rq_is_sync(rq2))
 		return rq_is_sync(rq1) ? rq1 : rq2;
 
-	if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META)
-		return rq1->cmd_flags & REQ_META ? rq1 : rq2;
+	if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO)
+		return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2;
 
 	s1 = blk_rq_pos(rq1);
 	s2 = blk_rq_pos(rq2);
@@ -1612,9 +1612,9 @@ static void cfq_remove_request(struct request *rq)
 	cfqq->cfqd->rq_queued--;
 	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
 					rq_data_dir(rq), rq_is_sync(rq));
-	if (rq->cmd_flags & REQ_META) {
-		WARN_ON(!cfqq->meta_pending);
-		cfqq->meta_pending--;
+	if (rq->cmd_flags & REQ_PRIO) {
+		WARN_ON(!cfqq->prio_pending);
+		cfqq->prio_pending--;
 	}
 }
 
@@ -3372,7 +3372,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
 	 * So both queues are sync. Let the new request get disk time if
 	 * it's a metadata request and the current queue is doing regular IO.
 	 */
-	if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
+	if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending)
 		return true;
 
 	/*
@@ -3439,8 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
 	struct cfq_io_context *cic = RQ_CIC(rq);
 
 	cfqd->rq_queued++;
-	if (rq->cmd_flags & REQ_META)
-		cfqq->meta_pending++;
+	if (rq->cmd_flags & REQ_PRIO)
+		cfqq->prio_pending++;
 
 	cfq_update_io_thinktime(cfqd, cfqq, cic);
 	cfq_update_io_seektime(cfqd, cfqq, rq);

+ 1 - 1
drivers/acpi/acpica/acconfig.h

@@ -121,7 +121,7 @@
 
 /* Maximum sleep allowed via Sleep() operator */
 
-#define ACPI_MAX_SLEEP                  20000	/* Two seconds */
+#define ACPI_MAX_SLEEP                  2000	/* Two seconds */
 
 /******************************************************************************
  *

+ 1 - 0
drivers/acpi/apei/Kconfig

@@ -13,6 +13,7 @@ config ACPI_APEI_GHES
 	bool "APEI Generic Hardware Error Source"
 	depends on ACPI_APEI && X86
 	select ACPI_HED
+	select IRQ_WORK
 	select LLIST
 	select GENERIC_ALLOCATOR
 	help

+ 1 - 1
drivers/acpi/apei/apei-base.c

@@ -618,7 +618,7 @@ int apei_osc_setup(void)
 	};
 
 	capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
-	capbuf[OSC_SUPPORT_TYPE] = 0;
+	capbuf[OSC_SUPPORT_TYPE] = 1;
 	capbuf[OSC_CONTROL_TYPE] = 0;
 
 	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))

+ 38 - 37
drivers/base/power/clock_ops.c

@@ -41,6 +41,22 @@ static struct pm_clk_data *__to_pcd(struct device *dev)
 	return dev ? dev->power.subsys_data : NULL;
 }
 
+/**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+	ce->clk = clk_get(dev, ce->con_id);
+	if (IS_ERR(ce->clk)) {
+		ce->status = PCE_STATUS_ERROR;
+	} else {
+		ce->status = PCE_STATUS_ACQUIRED;
+		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+	}
+}
+
 /**
  * pm_clk_add - Start using a device clock for power management.
  * @dev: Device whose clock is going to be used for power management.
@@ -73,6 +89,8 @@ int pm_clk_add(struct device *dev, const char *con_id)
 		}
 	}
 
+	pm_clk_acquire(dev, ce);
+
 	spin_lock_irq(&pcd->lock);
 	list_add_tail(&ce->node, &pcd->clock_list);
 	spin_unlock_irq(&pcd->lock);
@@ -82,17 +100,12 @@ int pm_clk_add(struct device *dev, const char *con_id)
 /**
  * __pm_clk_remove - Destroy PM clock entry.
  * @ce: PM clock entry to destroy.
- *
- * This routine must be called under the spinlock protecting the PM list of
- * clocks corresponding the the @ce's device.
  */
 static void __pm_clk_remove(struct pm_clock_entry *ce)
 {
 	if (!ce)
 		return;
 
-	list_del(&ce->node);
-
 	if (ce->status < PCE_STATUS_ERROR) {
 		if (ce->status == PCE_STATUS_ENABLED)
 			clk_disable(ce->clk);
@@ -126,18 +139,22 @@ void pm_clk_remove(struct device *dev, const char *con_id)
 	spin_lock_irq(&pcd->lock);
 
 	list_for_each_entry(ce, &pcd->clock_list, node) {
-		if (!con_id && !ce->con_id) {
-			__pm_clk_remove(ce);
-			break;
-		} else if (!con_id || !ce->con_id) {
+		if (!con_id && !ce->con_id)
+			goto remove;
+		else if (!con_id || !ce->con_id)
 			continue;
-		} else if (!strcmp(con_id, ce->con_id)) {
-			__pm_clk_remove(ce);
-			break;
-		}
+		else if (!strcmp(con_id, ce->con_id))
+			goto remove;
 	}
 
 	spin_unlock_irq(&pcd->lock);
+	return;
+
+ remove:
+	list_del(&ce->node);
+	spin_unlock_irq(&pcd->lock);
+
+	__pm_clk_remove(ce);
 }
 
 /**
@@ -175,43 +192,33 @@ void pm_clk_destroy(struct device *dev)
 {
 	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce, *c;
+	struct list_head list;
 
 	if (!pcd)
 		return;
 
 	dev->power.subsys_data = NULL;
+	INIT_LIST_HEAD(&list);
 
 	spin_lock_irq(&pcd->lock);
 
 	list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
-		__pm_clk_remove(ce);
+		list_move(&ce->node, &list);
 
 	spin_unlock_irq(&pcd->lock);
 
 	kfree(pcd);
+
+	list_for_each_entry_safe_reverse(ce, c, &list, node) {
+		list_del(&ce->node);
+		__pm_clk_remove(ce);
+	}
 }
 
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_PM_RUNTIME
 
-/**
- * pm_clk_acquire - Acquire a device clock.
- * @dev: Device whose clock is to be acquired.
- * @con_id: Connection ID of the clock.
- */
-static void pm_clk_acquire(struct device *dev,
-				    struct pm_clock_entry *ce)
-{
-	ce->clk = clk_get(dev, ce->con_id);
-	if (IS_ERR(ce->clk)) {
-		ce->status = PCE_STATUS_ERROR;
-	} else {
-		ce->status = PCE_STATUS_ACQUIRED;
-		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
-	}
-}
-
 /**
  * pm_clk_suspend - Disable clocks in a device's PM clock list.
  * @dev: Device to disable the clocks for.
@@ -230,9 +237,6 @@ int pm_clk_suspend(struct device *dev)
 	spin_lock_irqsave(&pcd->lock, flags);
 
 	list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
-		if (ce->status == PCE_STATUS_NONE)
-			pm_clk_acquire(dev, ce);
-
 		if (ce->status < PCE_STATUS_ERROR) {
 			clk_disable(ce->clk);
 			ce->status = PCE_STATUS_ACQUIRED;
@@ -262,9 +266,6 @@ int pm_clk_resume(struct device *dev)
 	spin_lock_irqsave(&pcd->lock, flags);
 
 	list_for_each_entry(ce, &pcd->clock_list, node) {
-		if (ce->status == PCE_STATUS_NONE)
-			pm_clk_acquire(dev, ce);
-
 		if (ce->status < PCE_STATUS_ERROR) {
 			clk_enable(ce->clk);
 			ce->status = PCE_STATUS_ENABLED;

+ 4 - 4
drivers/block/floppy.c

@@ -4250,7 +4250,7 @@ static int __init floppy_init(void)
 	use_virtual_dma = can_use_virtual_dma & 1;
 	fdc_state[0].address = FDC1;
 	if (fdc_state[0].address == -1) {
-		del_timer(&fd_timeout);
+		del_timer_sync(&fd_timeout);
 		err = -ENODEV;
 		goto out_unreg_region;
 	}
@@ -4261,7 +4261,7 @@ static int __init floppy_init(void)
 	fdc = 0;		/* reset fdc in case of unexpected interrupt */
 	err = floppy_grab_irq_and_dma();
 	if (err) {
-		del_timer(&fd_timeout);
+		del_timer_sync(&fd_timeout);
 		err = -EBUSY;
 		goto out_unreg_region;
 	}
@@ -4318,7 +4318,7 @@ static int __init floppy_init(void)
 		user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 	}
 	fdc = 0;
-	del_timer(&fd_timeout);
+	del_timer_sync(&fd_timeout);
 	current_drive = 0;
 	initialized = true;
 	if (have_no_fdc) {
@@ -4368,7 +4368,7 @@ out_unreg_blkdev:
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
 	while (dr--) {
-		del_timer(&motor_off_timer[dr]);
+		del_timer_sync(&motor_off_timer[dr]);
 		if (disks[dr]->queue)
 			blk_cleanup_queue(disks[dr]->queue);
 		put_disk(disks[dr]);

+ 1 - 1
drivers/block/xen-blkback/common.h

@@ -46,7 +46,7 @@
 
 #define DRV_PFX "xen-blkback:"
 #define DPRINTK(fmt, args...)				\
-	pr_debug(DRV_PFX "(%s:%d) " fmt ".\n",	\
+	pr_debug(DRV_PFX "(%s:%d) " fmt ".\n",		\
 		 __func__, __LINE__, ##args)
 
 

+ 3 - 3
drivers/block/xen-blkback/xenbus.c

@@ -590,7 +590,7 @@ static void frontend_changed(struct xenbus_device *dev,
 
 		/*
 		 * Enforce precondition before potential leak point.
-		 * blkif_disconnect() is idempotent.
+		 * xen_blkif_disconnect() is idempotent.
 		 */
 		xen_blkif_disconnect(be->blkif);
 
@@ -601,17 +601,17 @@ static void frontend_changed(struct xenbus_device *dev,
 		break;
 
 	case XenbusStateClosing:
-		xen_blkif_disconnect(be->blkif);
 		xenbus_switch_state(dev, XenbusStateClosing);
 		break;
 
 	case XenbusStateClosed:
+		xen_blkif_disconnect(be->blkif);
 		xenbus_switch_state(dev, XenbusStateClosed);
 		if (xenbus_dev_is_online(dev))
 			break;
 		/* fall through if not online */
 	case XenbusStateUnknown:
-		/* implies blkif_disconnect() via blkback_remove() */
+		/* implies xen_blkif_disconnect() via xen_blkbk_remove() */
 		device_unregister(&dev->dev);
 		break;
 

+ 6 - 0
drivers/bluetooth/btusb.c

@@ -72,9 +72,15 @@ static struct usb_device_id btusb_table[] = {
 	/* Apple MacBookAir3,1, MacBookAir3,2 */
 	{ USB_DEVICE(0x05ac, 0x821b) },
 
+	/* Apple MacBookAir4,1 */
+	{ USB_DEVICE(0x05ac, 0x821f) },
+
 	/* Apple MacBookPro8,2 */
 	{ USB_DEVICE(0x05ac, 0x821a) },
 
+	/* Apple MacMini5,1 */
+	{ USB_DEVICE(0x05ac, 0x8281) },
+
 	/* AVM BlueFRITZ! USB v2.0 */
 	{ USB_DEVICE(0x057c, 0x3800) },
 

+ 8 - 8
drivers/bluetooth/btwilink.c

@@ -124,6 +124,13 @@ static long st_receive(void *priv_data, struct sk_buff *skb)
 /* ------- Interfaces to HCI layer ------ */
 /* protocol structure registered with shared transport */
 static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
+	{
+		.chnl_id = HCI_EVENT_PKT, /* HCI Events */
+		.hdr_len = sizeof(struct hci_event_hdr),
+		.offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
+		.len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
+		.reserve = 8,
+	},
 	{
 		.chnl_id = HCI_ACLDATA_PKT, /* ACL */
 		.hdr_len = sizeof(struct hci_acl_hdr),
@@ -138,13 +145,6 @@ static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
 		.len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
 		.reserve = 8,
 	},
-	{
-		.chnl_id = HCI_EVENT_PKT, /* HCI Events */
-		.hdr_len = sizeof(struct hci_event_hdr),
-		.offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
-		.len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
-		.reserve = 8,
-	},
 };
 
 /* Called from HCI core to initialize the device */
@@ -240,7 +240,7 @@ static int ti_st_close(struct hci_dev *hdev)
 	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 		return 0;
 
-	for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
+	for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
 		err = st_unregister(&ti_st_proto[i]);
 		if (err)
 			BT_ERR("st_unregister(%d) failed with error %d",

+ 1 - 0
drivers/char/tpm/Kconfig

@@ -43,6 +43,7 @@ config TCG_NSC
 
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
+	depends on PPC64 || HAS_IOPORT
 	---help---
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 

+ 8 - 1
drivers/char/tpm/tpm.c

@@ -383,6 +383,9 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
 	u32 count, ordinal;
 	unsigned long stop;
 
+	if (bufsiz > TPM_BUFSIZE)
+		bufsiz = TPM_BUFSIZE;
+
 	count = be32_to_cpu(*((__be32 *) (buf + 2)));
 	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
 	if (count == 0)
@@ -1102,6 +1105,7 @@ ssize_t tpm_read(struct file *file, char __user *buf,
 {
 	struct tpm_chip *chip = file->private_data;
 	ssize_t ret_size;
+	int rc;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
 	flush_work_sync(&chip->work);
@@ -1112,8 +1116,11 @@ ssize_t tpm_read(struct file *file, char __user *buf,
 			ret_size = size;
 
 		mutex_lock(&chip->buffer_mutex);
-		if (copy_to_user(buf, chip->data_buffer, ret_size))
+		rc = copy_to_user(buf, chip->data_buffer, ret_size);
+		memset(chip->data_buffer, 0, ret_size);
+		if (rc)
 			ret_size = -EFAULT;
+
 		mutex_unlock(&chip->buffer_mutex);
 	}
 

+ 0 - 2
drivers/char/tpm/tpm_nsc.c

@@ -396,8 +396,6 @@ static void __exit cleanup_nsc(void)
 	if (pdev) {
 		tpm_nsc_remove(&pdev->dev);
 		platform_device_unregister(pdev);
-		kfree(pdev);
-		pdev = NULL;
 	}
 
 	platform_driver_unregister(&nsc_drv);

+ 3 - 0
drivers/cpufreq/pcc-cpufreq.c

@@ -261,6 +261,9 @@ static int pcc_get_offset(int cpu)
 	pr = per_cpu(processors, cpu);
 	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
 
+	if (!pr)
+		return -ENODEV;
+
 	status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;

+ 3 - 0
drivers/firewire/ohci.c

@@ -290,6 +290,9 @@ static const struct {
 	{PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
 		QUIRK_CYCLE_TIMER},
 
+	{PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_NO_MSI},
+
 	{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
 		QUIRK_CYCLE_TIMER},
 

部分文件因为文件数量过多而无法显示