Merge branch 'sh/stable-updates'

Documentation/scsi/hptiop.txt

@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of

MAINTAINERS

@@ -577,6 +577,11 @@ M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M:	Hubert Feurstein <hubert.feurstein@contec.at>
+S:	Maintained
+F:	arch/arm/mach-ep93xx/micro9.c
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
@@ -1231,6 +1236,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROCADE BFA FC SCSI DRIVER
+P:      Jing Huang
+M:      huangj@brocade.com
+L:      linux-scsi@vger.kernel.org
+S:      Supported
+F:      drivers/scsi/bfa/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -2058,7 +2070,7 @@ S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M:	Riku Voipio <riku.vipio@iki.fi>
+M:	Riku Voipio <riku.voipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
@@ -4646,6 +4658,14 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P:     Jayamohan Kallickal
+M:     jayamohank@serverengines.com
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
+
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

arch/arm/include/asm/bitops.h

@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>

arch/arm/kernel/time.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/errno.h>

arch/arm/kernel/traps.c

@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] ", where);
-	print_symbol("(%s) ", where);
-	printk("from [<%08lx>] ", from);
-	print_symbol("(%s)\n", from);
+	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+	sprint_symbol(sym1, where);
+	sprint_symbol(sym2, from);
+	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
 	if (in_exception_text(where))
-		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
 {
-	unsigned long p = bottom & ~31;
+	unsigned long first;
 	mm_segment_t fs;
 	int i;
 
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
-	for (p = bottom & ~31; p < top;) {
-		printk("%04lx: ", p & 0xffff);
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
 
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
 
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				__get_user(val, (unsigned long *)p);
-				printk("%08x ", val);
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk ("\n");
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
 
 	set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
 	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("Code: ");
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
 			bad = __get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
-			printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
 		else {
-			printk("bad PC value.");
+			p += sprintf(p, "bad PC value");
 			break;
 		}
 	}
-	printk("\n");
+	printk("%sCode: %s\n", lvl, str);
 
 	set_fs(fs);
 }
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
+	sysfs_printk_last_file();
 	print_modules();
 	__show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, task_pid_nr(tsk), thread + 1);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp,
+		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
 		dump_backtrace(regs, tsk);
-		dump_instr(regs);
+		dump_instr(KERN_EMERG, regs);
 	}
 }
 
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
-		dump_instr(regs);
+		dump_instr(KERN_INFO, regs);
 	}
 #endif
 
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
 			task_pid_nr(current), current->comm, n);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 	}
 #endif
 
@@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr(regs);
+		dump_instr("", regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
 			c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	if (user_debug & UDBG_BADABORT) {
 		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
 			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 		show_pte(current->mm, addr);
 	}
 #endif

arch/arm/mach-bcmring/core.c

@@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
 	.handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
 	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }

arch/arm/mach-bcmring/include/mach/system.h

@@ -29,7 +29,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 

arch/arm/mach-ep93xx/Kconfig

@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "0x00000000 - SDCE3/SyncBoot"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000
+	  first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
 	bool "0xc0000000 - SDCEO"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000
+	  first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+	bool "0xd0000000 - SDCE1"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+	bool "0xe0000000 - SDCE2"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	bool "0xf0000000 - SDCE3/AsyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xf0000000.
 
 endchoice
 
@@ -112,28 +130,36 @@ config MACH_MICRO9
 	bool
 
 config MACH_MICRO9H
-	bool "Support Contec Hypercontrol Micro9-H"
+	bool "Support Contec Micro9-High"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-H board.
+	  Contec Micro9-High board.
 
 config MACH_MICRO9M
-	bool "Support Contec Hypercontrol Micro9-M"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "Support Contec Micro9-Mid"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-M board.
+	  Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-	bool "Support Contec Hypercontrol Micro9-L"
+	bool "Support Contec Micro9-Lite"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-L board.
+	  Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"

arch/arm/mach-ep93xx/Makefile.boot

@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100

arch/arm/mach-ep93xx/clock.c

@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+	struct clk	*parent;
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+	.parent		= &clk_xtali,
+};
+static struct clk clk_f = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_h = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_p = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_pll2 = {
+	.parent		= &clk_xtali,
+};
 static struct clk clk_usb_host = {
+	.parent		= &clk_pll2,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+	INIT_CK(NULL,			"xtali",	&clk_xtali),
 	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
 	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
 	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk->users++) {
+		if (clk->parent)
+			__clk_enable(clk->parent);
+
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v |= clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
-	if (!clk->users++ && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value |= clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
-	if (!--clk->users && clk->enable_reg) {
-		u32 value;
+	if (!--clk->users) {
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v &= ~clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
 
-		value = __raw_readl(clk->enable_reg);
-		value &= ~clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
+		if (clk->parent)
+			__clk_disable(clk->parent);
 	}
 }
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+	unsigned long rate = clk_get_rate(clk->parent);
 	u32 value;
 
 	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
 	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return EP93XX_EXT_CLK_RATE;
+		return rate;
 	else
-		return EP93XX_EXT_CLK_RATE / 2;
+		return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-				  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+			int *psel, int *esel, int *pdiv, int *div)
 {
-	unsigned long max_rate, best_rate = 0,
-		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	struct clk *mclk;
+	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
 	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+		       clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	 */
 	for (i = 0; i < 3; i++) {
 		if (i == 0)
-			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+			mclk = &clk_xtali;
 		else if (i == 1)
-			mclk_rate = clk_pll1.rate * 2;
-		else if (i == 2)
-			mclk_rate = clk_pll2.rate * 2;
+			mclk = &clk_pll1;
+		else
+			mclk = &clk_pll2;
+		mclk_rate = mclk->rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 				*div = __div;
 				*psel = (i == 2);
 				*esel = (i != 0);
-				best_rate = actual_rate;
+				clk->parent = mclk;
+				clk->rate = actual_rate;
 				rate_err = abs(actual_rate - rate);
 				found = 1;
 			}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	}
 
 	if (!found)
-		return 0;
+		return -EINVAL;
 
-	return best_rate;
+	return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long actual_rate;
-	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
 	u32 val;
 
-	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-	if (actual_rate == 0)
-		return -EINVAL;
-	clk->rate = actual_rate;
+	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+	if (err)
+		return err;
 
 	/* Clear the esel, psel, pdiv and div bits */
 	val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = EP93XX_EXT_CLK_RATE;
+	rate = clk_xtali.rate;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll1.rate = clk_xtali.rate;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll2.rate = clk_xtali.rate;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {

arch/arm/mach-ep93xx/core.c

@@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
 	.name			= "i2c-gpio",
@@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = {
 	.dev.platform_data	= &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+				struct i2c_board_info *devices, int num)
 {
+	/*
+	 * Set the EEPROM interface pin drive type control.
+	 * Defines the driver type for the EECLK and EEDAT pins as either
+	 * open drain, which will require an external pull-up, or a normal
+	 * CMOS driver.
+	 */
+	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+	__raw_writel((data->sda_is_open_drain << 1) |
+		     (data->scl_is_open_drain << 0),
+		     EP93XX_GPIO_EEDRIVE);
+
+	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
 	platform_device_register(&ep93xx_i2c_device);
 }

arch/arm/mach-ep93xx/edb93xx.c

@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,	/* default to 100 kHz */
+	.timeout		= 0,	/* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
 	},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_data,
-				ARRAY_SIZE(edb93xxa_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xxa_i2c_board_info,
+				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_data,
-				ARRAY_SIZE(edb93xx_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+				    edb93xx_i2c_board_info,
+				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }
 

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
 
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
@@ -134,13 +125,13 @@
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)

arch/arm/mach-ep93xx/include/mach/gpio.h

@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio)	\
+	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 #endif

arch/arm/mach-ep93xx/include/mach/memory.h

@@ -9,6 +9,12 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+			 struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);

arch/arm/mach-ep93xx/micro9.c

@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-static void __init micro9_init(void)
-{
-	ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-	.width		= 4,
-};
-
-static struct resource micro9h_flash_resource = {
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
+
+static struct resource micro9_flash_resource = {
 	.start		= EP93XX_CS1_PHYS_BASE,
 	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &micro9h_flash_data,
+		.platform_data	= &micro9_flash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &micro9h_flash_resource,
+	.resource	= &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+	micro9_flash_data.width = width;
+
+	platform_device_register(&micro9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+	u32 v;
+
+	/* Detect the bus width of the external flash memory */
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+		return 4; /* 32-bit */
+	else
+		return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
 {
-	platform_device_register(&micro9h_flash);
+	if (machine_is_micro9())
+		__micro9_register_flash(4);
+	else if (machine_is_micro9m() || machine_is_micro9s())
+		__micro9_register_flash(micro9_detect_bootwidth());
 }
 
-static void __init micro9h_init_machine(void)
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+	.phy_id		= 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
 	ep93xx_init_devices();
-	micro9_init();
-	micro9h_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
+	micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9h_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9m_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9l_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif

arch/arm/mach-integrator/pci_v3.c

@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>

arch/arm/mach-pxa/cpufreq-pxa2xx.c

@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
 
 static pxa_freqs_t pxa27x_freqs[] = {
 	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
 	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
 	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
 	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },

arch/arm/mach-pxa/csb726.c

@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
 };
 
 struct smsc911x_platform_config csb726_lan_config = {
-	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,

arch/arm/mach-sa1100/Makefile

@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
+obj-$(CONFIG_SA1100_H3100)		+= h3600.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o

arch/arm/mm/cache-v6.S

@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
+1:
+ USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
+2:
 	cmp	r0, r1
 	blo	1b
 #endif
@@ -142,6 +145,19 @@ ENTRY(v6_coherent_user_range)
 #endif
 	mov	pc, lr
 
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
 /*
  *	v6_flush_kern_dcache_page(kaddr)
  *

arch/arm/mm/cache-v7.S

@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
-1:	mcr	p15, 0, r0, c7, c11, 1		@ clean D line to the point of unification
+1:
+ USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
 	dsb
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
+ USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
 	add	r0, r0, r2
+2:
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
 	dsb
 	isb
 	mov	pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 

arch/arm/mm/fault-armv.c

@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	page = pfn_to_page(pfn);
 	mapping = page_mapping(page);
-	if (mapping) {
 #ifndef CONFIG_SMP
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-		if (dirty)
-			__flush_dcache_page(mapping, page);
+	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+		__flush_dcache_page(mapping, page);
 #endif
-
+	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, pfn);
 		else if (vma->vm_flags & VM_EXEC)

arch/arm/mm/fault.c

@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		 * down_read()
 		 */
 		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) &&
+		    !search_exception_tables(regs->ARM_pc))
+			goto no_context;
+#endif
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);

arch/arm/mm/highmem.c

@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic(type);
+
 	kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;

arch/arm/mm/init.c

@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	/*
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
-	start_pg = pfn_to_page(start_pfn);
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
 	end_pg = pfn_to_page(end_pfn);
 
 	/*

arch/arm/plat-s3c24xx/adc.c

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/blackfin/kernel/time.c

@@ -14,6 +14,7 @@
 #include <linux/time.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 
 #include <asm/blackfin.h>
 #include <asm/time.h>

arch/m32r/kernel/smp.c

@@ -17,6 +17,7 @@
 
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 #include <linux/smp.h>

arch/s390/include/asm/delay.h

@@ -14,10 +14,11 @@
 #ifndef _S390_DELAY_H
 #define _S390_DELAY_H
 
-extern void __udelay(unsigned long usecs);
-extern void udelay_simple(unsigned long usecs);
+extern void __udelay(unsigned long long usecs);
+extern void udelay_simple(unsigned long long usecs);
 extern void __delay(unsigned long loops);
 
-#define udelay(n) __udelay(n)
+#define udelay(n) __udelay((unsigned long long) (n))
+#define mdelay(n) __udelay((unsigned long long) (n) * 1000)
 
 #endif /* defined(_S390_DELAY_H) */

arch/s390/include/asm/elf.h

@@ -92,6 +92,18 @@
 /* Keep this the last entry.  */
 #define R_390_NUM	61
 
+/* Bits present in AT_HWCAP. */
+#define HWCAP_S390_ESAN3	1
+#define HWCAP_S390_ZARCH	2
+#define HWCAP_S390_STFLE	4
+#define HWCAP_S390_MSA		8
+#define HWCAP_S390_LDISP	16
+#define HWCAP_S390_EIMM		32
+#define HWCAP_S390_DFP		64
+#define HWCAP_S390_HPAGE	128
+#define HWCAP_S390_ETF3EH	256
+#define HWCAP_S390_HIGH_GPRS	512
+
 /*
  * These are used to set parameters in the core dumps.
  */

arch/s390/include/asm/ptrace.h

@@ -311,6 +311,10 @@ typedef struct
 	__u32		orig_gpr2;
 } s390_compat_regs;
 
+typedef struct
+{
+	__u32		gprs_high[NUM_GPRS];
+} s390_compat_regs_high;
 
 #ifdef __KERNEL__
 

arch/s390/include/asm/ucontext.h

@@ -9,6 +9,21 @@
 #ifndef _ASM_S390_UCONTEXT_H
 #define _ASM_S390_UCONTEXT_H
 
+#define UC_EXTENDED	0x00000001
+
+#ifndef __s390x__
+
+struct ucontext_extended {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	_sigregs	  uc_mcontext;
+	unsigned long	  uc_sigmask[2];
+	unsigned long	  uc_gprs_high[16];
+};
+
+#endif
+
 struct ucontext {
 	unsigned long	  uc_flags;
 	struct ucontext  *uc_link;

arch/s390/kernel/compat_signal.c

@@ -39,6 +39,7 @@ typedef struct
 	struct sigcontext32 sc;
 	_sigregs32 sregs;
 	int signo;
+	__u32 gprs_high[NUM_GPRS];
 	__u8 retcode[S390_SYSCALL_SIZE];
 } sigframe32;
 
@@ -48,6 +49,7 @@ typedef struct
 	__u8 retcode[S390_SYSCALL_SIZE];
 	compat_siginfo_t info;
 	struct ucontext32 uc;
+	__u32 gprs_high[NUM_GPRS];
 } rt_sigframe32;
 
 int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
@@ -344,6 +346,30 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 	return 0;
 }
 
+static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+	__u32 gprs_high[NUM_GPRS];
+	int i;
+
+	for (i = 0; i < NUM_GPRS; i++)
+		gprs_high[i] = regs->gprs[i] >> 32;
+
+	return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high));
+}
+
+static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+	__u32 gprs_high[NUM_GPRS];
+	int err, i;
+
+	err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high));
+	if (err)
+		return err;
+	for (i = 0; i < NUM_GPRS; i++)
+		*(__u32 *)&regs->gprs[i] = gprs_high[i];
+	return 0;
+}
+
 asmlinkage long sys32_sigreturn(void)
 {
 	struct pt_regs *regs = task_pt_regs(current);
@@ -363,6 +389,8 @@ asmlinkage long sys32_sigreturn(void)
 
 	if (restore_sigregs32(regs, &frame->sregs))
 		goto badframe;
+	if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+		goto badframe;
 
 	return regs->gprs[2];
 
@@ -394,6 +422,8 @@ asmlinkage long sys32_rt_sigreturn(void)
 
 	if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
 		goto badframe;
+	if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+		goto badframe;
 
 	err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp);
 	st.ss_sp = compat_ptr(ss_sp);
@@ -474,6 +504,8 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 
 	if (save_sigregs32(regs, &frame->sregs))
 		goto give_sigsegv;
+	if (save_sigregs_gprs_high(regs, frame->gprs_high))
+		goto give_sigsegv;
 	if (__put_user((unsigned long) &frame->sregs, &frame->sc.sregs))
 		goto give_sigsegv;
 
@@ -529,13 +561,14 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
 		goto give_sigsegv;
 
 	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
+	err |= __put_user(UC_EXTENDED, &frame->uc.uc_flags);
 	err |= __put_user(0, &frame->uc.uc_link);
 	err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
 	err |= __put_user(sas_ss_flags(regs->gprs[15]),
 	                  &frame->uc.uc_stack.ss_flags);
 	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
 	err |= save_sigregs32(regs, &frame->uc.uc_mcontext);
+	err |= save_sigregs_gprs_high(regs, frame->gprs_high);
 	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
 	if (err)
 		goto give_sigsegv;

arch/s390/kernel/compat_wrapper.S

@@ -409,7 +409,7 @@ sys32_munmap_wrapper:
 	.globl	sys32_truncate_wrapper
 sys32_truncate_wrapper:
 	llgtr	%r2,%r2			# const char *
-	llgfr	%r3,%r3			# unsigned long
+	lgfr	%r3,%r3			# long
 	jg	sys_truncate		# branch to system call
 
 	.globl	sys32_ftruncate_wrapper

arch/s390/kernel/ftrace.c

@@ -185,9 +185,6 @@ unsigned long prepare_ftrace_return(unsigned long ip, unsigned long parent)
 {
 	struct ftrace_graph_ent trace;
 
-	/* Nmi's are currently unsupported. */
-	if (unlikely(in_nmi()))
-		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)

arch/s390/kernel/module.c

@@ -55,6 +55,8 @@ void *module_alloc(unsigned long size)
 /* Free memory returned from module_alloc */
 void module_free(struct module *mod, void *module_region)
 {
+	vfree(mod->arch.syminfo);
+	mod->arch.syminfo = NULL;
 	vfree(module_region);
 }
 
@@ -402,6 +404,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    struct module *me)
 {
 	vfree(me->arch.syminfo);
+	me->arch.syminfo = NULL;
 	return module_bug_finalize(hdr, sechdrs, me);
 }
 

arch/s390/kernel/ptrace.c

@@ -57,6 +57,7 @@
 enum s390_regset {
 	REGSET_GENERAL,
 	REGSET_FP,
+	REGSET_GENERAL_EXTENDED,
 };
 
 static void
@@ -879,6 +880,67 @@ static int s390_compat_regs_set(struct task_struct *target,
 	return rc;
 }
 
+static int s390_compat_regs_high_get(struct task_struct *target,
+				     const struct user_regset *regset,
+				     unsigned int pos, unsigned int count,
+				     void *kbuf, void __user *ubuf)
+{
+	compat_ulong_t *gprs_high;
+
+	gprs_high = (compat_ulong_t *)
+		&task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+	if (kbuf) {
+		compat_ulong_t *k = kbuf;
+		while (count > 0) {
+			*k++ = *gprs_high;
+			gprs_high += 2;
+			count -= sizeof(*k);
+		}
+	} else {
+		compat_ulong_t __user *u = ubuf;
+		while (count > 0) {
+			if (__put_user(*gprs_high, u++))
+				return -EFAULT;
+			gprs_high += 2;
+			count -= sizeof(*u);
+		}
+	}
+	return 0;
+}
+
+static int s390_compat_regs_high_set(struct task_struct *target,
+				     const struct user_regset *regset,
+				     unsigned int pos, unsigned int count,
+				     const void *kbuf, const void __user *ubuf)
+{
+	compat_ulong_t *gprs_high;
+	int rc = 0;
+
+	gprs_high = (compat_ulong_t *)
+		&task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+	if (kbuf) {
+		const compat_ulong_t *k = kbuf;
+		while (count > 0) {
+			*gprs_high = *k++;
+			*gprs_high += 2;
+			count -= sizeof(*k);
+		}
+	} else {
+		const compat_ulong_t  __user *u = ubuf;
+		while (count > 0 && !rc) {
+			unsigned long word;
+			rc = __get_user(word, u++);
+			if (rc)
+				break;
+			*gprs_high = word;
+			*gprs_high += 2;
+			count -= sizeof(*u);
+		}
+	}
+
+	return rc;
+}
+
 static const struct user_regset s390_compat_regsets[] = {
 	[REGSET_GENERAL] = {
 		.core_note_type = NT_PRSTATUS,
@@ -896,6 +958,14 @@ static const struct user_regset s390_compat_regsets[] = {
 		.get = s390_fpregs_get,
 		.set = s390_fpregs_set,
 	},
+	[REGSET_GENERAL_EXTENDED] = {
+		.core_note_type = NT_PRXSTATUS,
+		.n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t),
+		.size = sizeof(compat_long_t),
+		.align = sizeof(compat_long_t),
+		.get = s390_compat_regs_high_get,
+		.set = s390_compat_regs_high_set,
+	},
 };
 
 static const struct user_regset_view user_s390_compat_view = {

arch/s390/kernel/setup.c

@@ -729,7 +729,7 @@ static void __init setup_hwcaps(void)
 
 	if ((facility_list & (1UL << (31 - 22)))
 	    && (facility_list & (1UL << (31 - 30))))
-		elf_hwcap |= 1UL << 8;
+		elf_hwcap |= HWCAP_S390_ETF3EH;
 
 	/*
 	 * Check for additional facilities with store-facility-list-extended.
@@ -748,11 +748,20 @@ static void __init setup_hwcaps(void)
 	    __stfle(&facility_list_extended, 1) > 0) {
 		if ((facility_list_extended & (1ULL << (63 - 42)))
 		    && (facility_list_extended & (1ULL << (63 - 44))))
-			elf_hwcap |= 1UL << 6;
+			elf_hwcap |= HWCAP_S390_DFP;
 	}
 
+	/*
+	 * Huge page support HWCAP_S390_HPAGE is bit 7.
+	 */
 	if (MACHINE_HAS_HPAGE)
-		elf_hwcap |= 1UL << 7;
+		elf_hwcap |= HWCAP_S390_HPAGE;
+
+	/*
+	 * 64-bit register support for 31-bit processes
+	 * HWCAP_S390_HIGH_GPRS is bit 9.
+	 */
+	elf_hwcap |= HWCAP_S390_HIGH_GPRS;
 
 	switch (S390_lowcore.cpu_id.machine) {
 	case 0x9672:

arch/s390/kernel/swsusp_asm64.S

@@ -43,7 +43,7 @@ swsusp_arch_suspend:
 	lghi	%r1,0x1000
 
 	/* Save CPU address */
-	stap	__LC_CPU_ADDRESS(%r1)
+	stap	__LC_CPU_ADDRESS(%r0)
 
 	/* Store registers */
 	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
@@ -69,8 +69,21 @@ swsusp_arch_suspend:
 	stmg	%r0,%r15,0x280(%r1)		/* store general registers */
 
 	stpt	0x328(%r1)			/* store timer */
+	stck	__SF_EMPTY(%r15)		/* store clock */
 	stckc	0x330(%r1)			/* store clock comparator */
 
+	/* Update cputime accounting before going to sleep */
+	lg	%r0,__LC_LAST_UPDATE_TIMER
+	slg	%r0,0x328(%r1)
+	alg	%r0,__LC_SYSTEM_TIMER
+	stg	%r0,__LC_SYSTEM_TIMER
+	mvc	__LC_LAST_UPDATE_TIMER(8),0x328(%r1)
+	lg	%r0,__LC_LAST_UPDATE_CLOCK
+	slg	%r0,__SF_EMPTY(%r15)
+	alg	%r0,__LC_STEAL_TIMER
+	stg	%r0,__LC_STEAL_TIMER
+	mvc	__LC_LAST_UPDATE_CLOCK(8),__SF_EMPTY(%r15)
+
 	/* Activate DAT */
 	stosm	__SF_EMPTY(%r15),0x04
 
@@ -159,8 +172,7 @@ pgm_check_entry:
 	larl	%r1,.Lresume_cpu		/* Resume CPU address: r2 */
 	stap	0(%r1)
 	llgh	%r2,0(%r1)
-	lghi	%r3,0x1000
-	llgh	%r1,__LC_CPU_ADDRESS(%r3)	/* Suspend CPU address: r1 */
+	llgh	%r1,__LC_CPU_ADDRESS(%r0)	/* Suspend CPU address: r1 */
 	cgr	%r1,%r2
 	je	restore_registers		/* r1 = r2 -> nothing to do */
 	larl	%r4,.Lrestart_suspend_psw	/* Set new restart PSW */
@@ -200,8 +212,11 @@ restart_suspend:
 
 restore_registers:
 	/* Restore registers */
-	lghi	%r13,0x1000		/* %r1 = pointer to save arae */
+	lghi	%r13,0x1000		/* %r1 = pointer to save area */
 
+	/* Ignore time spent in suspended state. */
+	llgf	%r1,0x318(%r13)
+	stck	__LC_LAST_UPDATE_CLOCK(%r1)
 	spt	0x328(%r13)		/* reprogram timer */
 	//sckc	0x330(%r13)		/* set clock comparator */
 
@@ -229,9 +244,6 @@ restore_registers:
 	/* Load old stack */
 	lg	%r15,0x2f8(%r13)
 
-	/* Pointer to save area */
-	lghi	%r13,0x1000
-
 	/* Restore prefix register */
 	spx	0x318(%r13)
 

arch/s390/kernel/vdso.c

@@ -246,6 +246,13 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 		goto out_up;
 	}
 
+	/*
+	 * Put vDSO base into mm struct. We need to do this before calling
+	 * install_special_mapping or the perf counter mmap tracking code
+	 * will fail to recognise it as a vDSO (since arch_vma_name fails).
+	 */
+	current->mm->context.vdso_base = vdso_base;
+
 	/*
 	 * our vma flags don't have VM_WRITE so by default, the process
 	 * isn't allowed to write those pages.
@@ -267,14 +274,7 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
 				     VM_ALWAYSDUMP,
 				     vdso_pagelist);
 	if (rc)
-		goto out_up;
-
-	/* Put vDSO base into mm struct */
-	current->mm->context.vdso_base = vdso_base;
-
-	up_write(&mm->mmap_sem);
-	return 0;
-
+		current->mm->context.vdso_base = 0;
 out_up:
 	up_write(&mm->mmap_sem);
 	return rc;

arch/s390/kernel/vmlinux.lds.S

@@ -51,6 +51,7 @@ SECTIONS
 
 	. = ALIGN(PAGE_SIZE);
 	_eshared = .;		/* End of shareable data */
+	_sdata = .;		/* Start of data section */
 
 	EXCEPTION_TABLE(16) :data
 

arch/s390/lib/delay.c

@@ -25,13 +25,13 @@ void __delay(unsigned long loops)
 	asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
 }
 
-static void __udelay_disabled(unsigned long usecs)
+static void __udelay_disabled(unsigned long long usecs)
 {
 	unsigned long mask, cr0, cr0_saved;
 	u64 clock_saved;
 
 	clock_saved = local_tick_disable();
-	set_clock_comparator(get_clock() + ((u64) usecs << 12));
+	set_clock_comparator(get_clock() + (usecs << 12));
 	__ctl_store(cr0_saved, 0, 0);
 	cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
 	__ctl_load(cr0 , 0, 0);
@@ -46,20 +46,25 @@ static void __udelay_disabled(unsigned long usecs)
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
 
-static void __udelay_enabled(unsigned long usecs)
+static void __udelay_enabled(unsigned long long usecs)
 {
 	unsigned long mask;
-	u64 end, time;
+	u64 clock_saved;
+	u64 end;
 
 	mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
-	end = get_clock() + ((u64) usecs << 12);
+	end = get_clock() + (usecs << 12);
 	do {
-		time = end < S390_lowcore.clock_comparator ?
-			end : S390_lowcore.clock_comparator;
-		set_clock_comparator(time);
+		clock_saved = 0;
+		if (end < S390_lowcore.clock_comparator) {
+			clock_saved = local_tick_disable();
+			set_clock_comparator(end);
+		}
 		trace_hardirqs_on();
 		__load_psw_mask(mask);
 		local_irq_disable();
+		if (clock_saved)
+			local_tick_enable(clock_saved);
 	} while (get_clock() < end);
 	set_clock_comparator(S390_lowcore.clock_comparator);
 }
@@ -67,7 +72,7 @@ static void __udelay_enabled(unsigned long usecs)
 /*
  * Waits for 'usecs' microseconds using the TOD clock comparator.
  */
-void __udelay(unsigned long usecs)
+void __udelay(unsigned long long usecs)
 {
 	unsigned long flags;
 
@@ -101,11 +106,11 @@ EXPORT_SYMBOL(__udelay);
  * Simple udelay variant. To be used on startup and reboot
  * when the interrupt handler isn't working.
  */
-void udelay_simple(unsigned long usecs)
+void udelay_simple(unsigned long long usecs)
 {
 	u64 end;
 
-	end = get_clock() + ((u64) usecs << 12);
+	end = get_clock() + (usecs << 12);
 	while (get_clock() < end)
 		cpu_relax();
 }

arch/s390/lib/uaccess_mvcos.c

@@ -36,7 +36,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 	tmp1 = -4096UL;
 	asm volatile(
 		"0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n"
-		"   jz    7f\n"
+		"9: jz    7f\n"
 		"1:"ALR"  %0,%3\n"
 		"  "SLR"  %1,%3\n"
 		"  "SLR"  %2,%3\n"
@@ -47,7 +47,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   4f\n"
 		"3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n"
-		"  "SLR"  %0,%4\n"
+		"10:"SLR"  %0,%4\n"
 		"  "ALR"  %2,%4\n"
 		"4:"LHI"  %4,-1\n"
 		"  "ALR"  %4,%0\n"	/* copy remaining size, subtract 1 */
@@ -61,7 +61,7 @@ static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
 		"   j     8f\n"
 		"7:"SLR"  %0,%0\n"
 		"8: \n"
-		EX_TABLE(0b,2b) EX_TABLE(3b,4b)
+		EX_TABLE(0b,2b) EX_TABLE(3b,4b) EX_TABLE(9b,2b) EX_TABLE(10b,4b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: "d" (reg0) : "cc", "memory");
 	return size;
@@ -82,7 +82,7 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 	tmp1 = -4096UL;
 	asm volatile(
 		"0: .insn ss,0xc80000000000,0(%0,%1),0(%2),0\n"
-		"   jz    4f\n"
+		"6: jz    4f\n"
 		"1:"ALR"  %0,%3\n"
 		"  "SLR"  %1,%3\n"
 		"  "SLR"  %2,%3\n"
@@ -93,11 +93,11 @@ static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   5f\n"
 		"3: .insn ss,0xc80000000000,0(%4,%1),0(%2),0\n"
-		"  "SLR"  %0,%4\n"
+		"7:"SLR"  %0,%4\n"
 		"   j     5f\n"
 		"4:"SLR"  %0,%0\n"
 		"5: \n"
-		EX_TABLE(0b,2b) EX_TABLE(3b,5b)
+		EX_TABLE(0b,2b) EX_TABLE(3b,5b) EX_TABLE(6b,2b) EX_TABLE(7b,5b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: "d" (reg0) : "cc", "memory");
 	return size;

arch/s390/lib/uaccess_std.c

@@ -36,12 +36,12 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
 	tmp1 = -256UL;
 	asm volatile(
 		"0: mvcp  0(%0,%2),0(%1),%3\n"
-		"   jz    8f\n"
+		"10:jz    8f\n"
 		"1:"ALR"  %0,%3\n"
 		"   la    %1,256(%1)\n"
 		"   la    %2,256(%2)\n"
 		"2: mvcp  0(%0,%2),0(%1),%3\n"
-		"   jnz   1b\n"
+		"11:jnz   1b\n"
 		"   j     8f\n"
 		"3: la    %4,255(%1)\n"	/* %4 = ptr + 255 */
 		"  "LHI"  %3,-4096\n"
@@ -50,7 +50,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   5f\n"
 		"4: mvcp  0(%4,%2),0(%1),%3\n"
-		"  "SLR"  %0,%4\n"
+		"12:"SLR"  %0,%4\n"
 		"  "ALR"  %2,%4\n"
 		"5:"LHI"  %4,-1\n"
 		"  "ALR"  %4,%0\n"	/* copy remaining size, subtract 1 */
@@ -65,6 +65,7 @@ size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
 		"8:"SLR"  %0,%0\n"
 		"9: \n"
 		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b)
+		EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: : "cc", "memory");
 	return size;
@@ -85,12 +86,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
 	tmp1 = -256UL;
 	asm volatile(
 		"0: mvcs  0(%0,%1),0(%2),%3\n"
-		"   jz    5f\n"
+		"7: jz    5f\n"
 		"1:"ALR"  %0,%3\n"
 		"   la    %1,256(%1)\n"
 		"   la    %2,256(%2)\n"
 		"2: mvcs  0(%0,%1),0(%2),%3\n"
-		"   jnz   1b\n"
+		"8: jnz   1b\n"
 		"   j     5f\n"
 		"3: la    %4,255(%1)\n" /* %4 = ptr + 255 */
 		"  "LHI"  %3,-4096\n"
@@ -99,11 +100,12 @@ size_t copy_to_user_std(size_t size, void __user *ptr, const void *x)
 		"  "CLR"  %0,%4\n"	/* copy crosses next page boundary? */
 		"   jnh   6f\n"
 		"4: mvcs  0(%4,%1),0(%2),%3\n"
-		"  "SLR"  %0,%4\n"
+		"9:"SLR"  %0,%4\n"
 		"   j     6f\n"
 		"5:"SLR"  %0,%0\n"
 		"6: \n"
 		EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b)
+		EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b)
 		: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
 		: : "cc", "memory");
 	return size;

arch/s390/mm/pgtable.c

@@ -279,7 +279,10 @@ int s390_enable_sie(void)
 	/* lets check if we are allowed to replace the mm */
 	task_lock(tsk);
 	if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-	    tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+	    !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+	    tsk->mm != tsk->active_mm) {
 		task_unlock(tsk);
 		return -EINVAL;
 	}
@@ -295,7 +298,10 @@ int s390_enable_sie(void)
 	/* Now lets check again if something happened */
 	task_lock(tsk);
 	if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
-	    tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+	    !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+	    tsk->mm != tsk->active_mm) {
 		mmput(mm);
 		task_unlock(tsk);
 		return -EINVAL;

arch/sh/kernel/traps_32.c

@@ -25,6 +25,7 @@
 #include <linux/kexec.h>
 #include <linux/limits.h>
 #include <linux/proc_fs.h>
+#include <linux/sysfs.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/fpu.h>
@@ -159,12 +160,12 @@ void die(const char * str, struct pt_regs * regs, long err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 
 	printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-
+	sysfs_printk_last_file();
 	print_modules();
 	show_regs(regs);
 
@@ -180,6 +181,7 @@ void die(const char * str, struct pt_regs * regs, long err)
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (kexec_should_crash(current))
 		crash_kexec(regs);
@@ -190,7 +192,6 @@ void die(const char * str, struct pt_regs * regs, long err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 

arch/sh/mm/cache.c

@@ -128,7 +128,7 @@ void __update_cache(struct vm_area_struct *vma,
 		return;
 
 	page = pfn_to_page(pfn);
-	if (pfn_valid(pfn) && page_mapping(page)) {
+	if (pfn_valid(pfn)) {
 		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
 		if (dirty) {
 			unsigned long addr = (unsigned long)page_address(page);

arch/um/drivers/line.c

@@ -5,6 +5,7 @@
 
 #include "linux/irqreturn.h"
 #include "linux/kd.h"
+#include "linux/sched.h"
 #include "chan_kern.h"
 #include "irq_kern.h"
 #include "irq_user.h"

arch/um/drivers/port_kern.c

@@ -7,6 +7,7 @@
 #include "linux/interrupt.h"
 #include "linux/list.h"
 #include "linux/mutex.h"
+#include "linux/workqueue.h"
 #include "asm/atomic.h"
 #include "init.h"
 #include "irq_kern.h"

arch/um/kernel/irq.c

@@ -10,6 +10,7 @@
 #include "linux/interrupt.h"
 #include "linux/kernel_stat.h"
 #include "linux/module.h"
+#include "linux/sched.h"
 #include "linux/seq_file.h"
 #include "as-layout.h"
 #include "kern_util.h"

arch/x86/kernel/cpu/mcheck/mce_intel.c

@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
+#include <linux/sched.h>
 #include <asm/apic.h>
 #include <asm/processor.h>
 #include <asm/msr.h>

arch/x86/kernel/e820.c

@@ -1378,8 +1378,8 @@ static unsigned long ram_alignment(resource_size_t pos)
 	if (mb < 16)
 		return 1024*1024;
 
-	/* To 32MB for anything above that */
-	return 32*1024*1024;
+	/* To 64MB for anything above that */
+	return 64*1024*1024;
 }
 
 #define MAX_RESOURCE_SIZE ((resource_size_t)-1)

arch/x86/kernel/pci-gart_64.c

@@ -16,6 +16,7 @@
 #include <linux/agp_backend.h>
 #include <linux/init.h>
 #include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/spinlock.h>
 #include <linux/pci.h>

arch/x86/kernel/reboot.c

@@ -4,6 +4,7 @@
 #include <linux/pm.h>
 #include <linux/efi.h>
 #include <linux/dmi.h>
+#include <linux/sched.h>
 #include <linux/tboot.h>
 #include <acpi/reboot.h>
 #include <asm/io.h>

arch/xtensa/kernel/time.c

@@ -13,6 +13,7 @@
  */
 
 #include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/clocksource.h>
 #include <linux/interrupt.h>

crypto/aead.c

@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/rtnetlink.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/seq_file.h>
 

drivers/char/applicom.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/miscdevice.h>

drivers/char/epca.c

@@ -30,6 +30,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
 #include <linux/ctype.h>

drivers/char/generic_serial.c

@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/tty.h>
+#include <linux/sched.h>
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/generic_serial.h>

drivers/char/istallion.c

@@ -19,6 +19,7 @@
 /*****************************************************************************/
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/interrupt.h>

drivers/char/nozomi.c

@@ -48,6 +48,7 @@
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
+#include <linux/sched.h>
 #include <linux/serial.h>
 #include <linux/interrupt.h>
 #include <linux/kmod.h>

drivers/char/pty.c

@@ -18,6 +18,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/fcntl.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/major.h>
 #include <linux/mm.h>

drivers/char/rio/riocmd.c

@@ -32,6 +32,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/tty.h>

drivers/char/rio/rioctrl.c

@@ -31,6 +31,7 @@
 */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <asm/io.h>

drivers/char/rio/riotty.c

@@ -33,6 +33,7 @@
 #define __EXPLICIT_DEF_H__
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/tty.h>

drivers/char/ser_a2232.c

@@ -89,6 +89,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
+#include <linux/sched.h>
 #include <linux/tty.h>
 
 #include <asm/setup.h>

drivers/char/stallion.c

@@ -27,6 +27,7 @@
 /*****************************************************************************/
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/tty.h>

drivers/char/tlclk.c

@@ -32,6 +32,7 @@
 #include <linux/kernel.h>	/* printk() */
 #include <linux/fs.h>		/* everything... */
 #include <linux/errno.h>	/* error codes */
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>

drivers/hwmon/Kconfig

@@ -675,7 +675,7 @@ config SENSORS_SHT15
 
 config SENSORS_S3C
 	tristate "S3C24XX/S3C64XX Inbuilt ADC"
-	depends on ARCH_S3C2410 || ARCH_S3C64XX
+	depends on ARCH_S3C2410
 	help
 	  If you say yes here you get support for the on-board ADCs of
 	  the Samsung S3C24XX or S3C64XX series of SoC

drivers/hwmon/asus_atk0110.c

@@ -35,18 +35,22 @@
 #define METHOD_OLD_ENUM_FAN	"FSIF"
 
 #define ATK_MUX_HWMON		0x00000006ULL
+#define ATK_MUX_MGMT		0x00000011ULL
 
 #define ATK_CLASS_MASK		0xff000000ULL
 #define ATK_CLASS_FREQ_CTL	0x03000000ULL
 #define ATK_CLASS_FAN_CTL	0x04000000ULL
 #define ATK_CLASS_HWMON		0x06000000ULL
+#define ATK_CLASS_MGMT		0x11000000ULL
 
 #define ATK_TYPE_MASK		0x00ff0000ULL
 #define HWMON_TYPE_VOLT		0x00020000ULL
 #define HWMON_TYPE_TEMP		0x00030000ULL
 #define HWMON_TYPE_FAN		0x00040000ULL
 
-#define HWMON_SENSOR_ID_MASK	0x0000ffffULL
+#define ATK_ELEMENT_ID_MASK	0x0000ffffULL
+
+#define ATK_EC_ID		0x11060004ULL
 
 enum atk_pack_member {
 	HWMON_PACK_FLAGS,
@@ -89,6 +93,9 @@ struct atk_data {
 	/* new inteface */
 	acpi_handle enumerate_handle;
 	acpi_handle read_handle;
+	acpi_handle write_handle;
+
+	bool disable_ec;
 
 	int voltage_count;
 	int temperature_count;
@@ -129,9 +136,22 @@ struct atk_sensor_data {
 	char const *acpi_name;
 };
 
-struct atk_acpi_buffer_u64 {
-	union acpi_object buf;
-	u64 value;
+/* Return buffer format:
+ * [0-3] "value" is valid flag
+ * [4-7] value
+ * [8- ] unknown stuff on newer mobos
+ */
+struct atk_acpi_ret_buffer {
+	u32 flags;
+	u32 value;
+	u8 data[];
+};
+
+/* Input buffer used for GITM and SITM methods */
+struct atk_acpi_input_buf {
+	u32 id;
+	u32 param1;
+	u32 param2;
 };
 
 static int atk_add(struct acpi_device *device);
@@ -439,52 +459,147 @@ static int atk_read_value_old(struct atk_sensor_data *sensor, u64 *value)
 	return 0;
 }
 
-static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+static union acpi_object *atk_ggrp(struct atk_data *data, u16 mux)
 {
-	struct atk_data *data = sensor->data;
 	struct device *dev = &data->acpi_dev->dev;
+	struct acpi_buffer buf;
+	acpi_status ret;
 	struct acpi_object_list params;
-	struct acpi_buffer ret;
 	union acpi_object id;
-	struct atk_acpi_buffer_u64 tmp;
-	acpi_status status;
+	union acpi_object *pack;
 
 	id.type = ACPI_TYPE_INTEGER;
-	id.integer.value = sensor->id;
-
+	id.integer.value = mux;
 	params.count = 1;
 	params.pointer = &id;
 
-	tmp.buf.type = ACPI_TYPE_BUFFER;
-	tmp.buf.buffer.pointer = (u8 *)&tmp.value;
-	tmp.buf.buffer.length = sizeof(u64);
-	ret.length = sizeof(tmp);
-	ret.pointer = &tmp;
+	buf.length = ACPI_ALLOCATE_BUFFER;
+	ret = acpi_evaluate_object(data->enumerate_handle, NULL, &params, &buf);
+	if (ret != AE_OK) {
+		dev_err(dev, "GGRP[%#x] ACPI exception: %s\n", mux,
+				acpi_format_exception(ret));
+		return ERR_PTR(-EIO);
+	}
+	pack = buf.pointer;
+	if (pack->type != ACPI_TYPE_PACKAGE) {
+		/* Execution was successful, but the id was not found */
+		ACPI_FREE(pack);
+		return ERR_PTR(-ENOENT);
+	}
+
+	if (pack->package.count < 1) {
+		dev_err(dev, "GGRP[%#x] package is too small\n", mux);
+		ACPI_FREE(pack);
+		return ERR_PTR(-EIO);
+	}
+	return pack;
+}
+
+static union acpi_object *atk_gitm(struct atk_data *data, u64 id)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	struct atk_acpi_input_buf buf;
+	union acpi_object tmp;
+	struct acpi_object_list params;
+	struct acpi_buffer ret;
+	union acpi_object *obj;
+	acpi_status status;
+
+	buf.id = id;
+	buf.param1 = 0;
+	buf.param2 = 0;
 
+	tmp.type = ACPI_TYPE_BUFFER;
+	tmp.buffer.pointer = (u8 *)&buf;
+	tmp.buffer.length = sizeof(buf);
+
+	params.count = 1;
+	params.pointer = (void *)&tmp;
+
+	ret.length = ACPI_ALLOCATE_BUFFER;
 	status = acpi_evaluate_object_typed(data->read_handle, NULL, &params,
 			&ret, ACPI_TYPE_BUFFER);
 	if (status != AE_OK) {
-		dev_warn(dev, "%s: ACPI exception: %s\n", __func__,
+		dev_warn(dev, "GITM[%#llx] ACPI exception: %s\n", id,
 				acpi_format_exception(status));
-		return -EIO;
+		return ERR_PTR(-EIO);
+	}
+	obj = ret.pointer;
+
+	/* Sanity check */
+	if (obj->buffer.length < 8) {
+		dev_warn(dev, "Unexpected ASBF length: %u\n",
+				obj->buffer.length);
+		ACPI_FREE(obj);
+		return ERR_PTR(-EIO);
 	}
+	return obj;
+}
 
-	/* Return buffer format:
-	 * [0-3] "value" is valid flag
-	 * [4-7] value
-	 */
-	if (!(tmp.value & 0xffffffff)) {
+static union acpi_object *atk_sitm(struct atk_data *data,
+		struct atk_acpi_input_buf *buf)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	struct acpi_object_list params;
+	union acpi_object tmp;
+	struct acpi_buffer ret;
+	union acpi_object *obj;
+	acpi_status status;
+
+	tmp.type = ACPI_TYPE_BUFFER;
+	tmp.buffer.pointer = (u8 *)buf;
+	tmp.buffer.length = sizeof(*buf);
+
+	params.count = 1;
+	params.pointer = &tmp;
+
+	ret.length = ACPI_ALLOCATE_BUFFER;
+	status = acpi_evaluate_object_typed(data->write_handle, NULL, &params,
+			&ret, ACPI_TYPE_BUFFER);
+	if (status != AE_OK) {
+		dev_warn(dev, "SITM[%#x] ACPI exception: %s\n", buf->id,
+				acpi_format_exception(status));
+		return ERR_PTR(-EIO);
+	}
+	obj = ret.pointer;
+
+	/* Sanity check */
+	if (obj->buffer.length < 8) {
+		dev_warn(dev, "Unexpected ASBF length: %u\n",
+				obj->buffer.length);
+		ACPI_FREE(obj);
+		return ERR_PTR(-EIO);
+	}
+	return obj;
+}
+
+static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+{
+	struct atk_data *data = sensor->data;
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *obj;
+	struct atk_acpi_ret_buffer *buf;
+	int err = 0;
+
+	obj = atk_gitm(data, sensor->id);
+	if (IS_ERR(obj))
+		return PTR_ERR(obj);
+
+	buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+	if (buf->flags == 0) {
 		/* The reading is not valid, possible causes:
 		 * - sensor failure
 		 * - enumeration was FUBAR (and we didn't notice)
 		 */
-		dev_info(dev, "Failure: %#llx\n", tmp.value);
-		return -EIO;
+		dev_warn(dev, "Read failed, sensor = %#llx\n", sensor->id);
+		err = -EIO;
+		goto out;
 	}
 
-	*value = (tmp.value & 0xffffffff00000000ULL) >> 32;
-
-	return 0;
+	*value = buf->value;
+out:
+	ACPI_FREE(obj);
+	return err;
 }
 
 static int atk_read_value(struct atk_sensor_data *sensor, u64 *value)
@@ -713,43 +828,141 @@ cleanup:
 	return ret;
 }
 
-static int atk_enumerate_new_hwmon(struct atk_data *data)
+static int atk_ec_present(struct atk_data *data)
 {
 	struct device *dev = &data->acpi_dev->dev;
-	struct acpi_buffer buf;
-	acpi_status ret;
-	struct acpi_object_list params;
-	union acpi_object id;
 	union acpi_object *pack;
-	int err;
+	union acpi_object *ec;
+	int ret;
 	int i;
 
-	dev_dbg(dev, "Enumerating hwmon sensors\n");
+	pack = atk_ggrp(data, ATK_MUX_MGMT);
+	if (IS_ERR(pack)) {
+		if (PTR_ERR(pack) == -ENOENT) {
+			/* The MGMT class does not exists - that's ok */
+			dev_dbg(dev, "Class %#llx not found\n", ATK_MUX_MGMT);
+			return 0;
+		}
+		return PTR_ERR(pack);
+	}
 
-	id.type = ACPI_TYPE_INTEGER;
-	id.integer.value = ATK_MUX_HWMON;
-	params.count = 1;
-	params.pointer = &id;
+	/* Search the EC */
+	ec = NULL;
+	for (i = 0; i < pack->package.count; i++) {
+		union acpi_object *obj = &pack->package.elements[i];
+		union acpi_object *id;
 
-	buf.length = ACPI_ALLOCATE_BUFFER;
-	ret = acpi_evaluate_object_typed(data->enumerate_handle, NULL, &params,
-			&buf, ACPI_TYPE_PACKAGE);
-	if (ret != AE_OK) {
-		dev_warn(dev, METHOD_ENUMERATE ": ACPI exception: %s\n",
-				acpi_format_exception(ret));
-		return -ENODEV;
+		if (obj->type != ACPI_TYPE_PACKAGE)
+			continue;
+
+		id = &obj->package.elements[0];
+		if (id->type != ACPI_TYPE_INTEGER)
+			continue;
+
+		if (id->integer.value == ATK_EC_ID) {
+			ec = obj;
+			break;
+		}
 	}
 
-	/* Result must be a package */
-	pack = buf.pointer;
+	ret = (ec != NULL);
+	if (!ret)
+		/* The system has no EC */
+		dev_dbg(dev, "EC not found\n");
 
-	if (pack->package.count < 1) {
-		dev_dbg(dev, "%s: hwmon package is too small: %d\n", __func__,
-				pack->package.count);
-		err = -EINVAL;
-		goto out;
+	ACPI_FREE(pack);
+	return ret;
+}
+
+static int atk_ec_enabled(struct atk_data *data)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *obj;
+	struct atk_acpi_ret_buffer *buf;
+	int err;
+
+	obj = atk_gitm(data, ATK_EC_ID);
+	if (IS_ERR(obj)) {
+		dev_err(dev, "Unable to query EC status\n");
+		return PTR_ERR(obj);
+	}
+	buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+
+	if (buf->flags == 0) {
+		dev_err(dev, "Unable to query EC status\n");
+		err = -EIO;
+	} else {
+		err = (buf->value != 0);
+		dev_dbg(dev, "EC is %sabled\n",
+				err ? "en" : "dis");
+	}
+
+	ACPI_FREE(obj);
+	return err;
+}
+
+static int atk_ec_ctl(struct atk_data *data, int enable)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *obj;
+	struct atk_acpi_input_buf sitm;
+	struct atk_acpi_ret_buffer *ec_ret;
+	int err = 0;
+
+	sitm.id = ATK_EC_ID;
+	sitm.param1 = enable;
+	sitm.param2 = 0;
+
+	obj = atk_sitm(data, &sitm);
+	if (IS_ERR(obj)) {
+		dev_err(dev, "Failed to %sable the EC\n",
+				enable ? "en" : "dis");
+		return PTR_ERR(obj);
+	}
+	ec_ret = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+	if (ec_ret->flags == 0) {
+		dev_err(dev, "Failed to %sable the EC\n",
+				enable ? "en" : "dis");
+		err = -EIO;
+	} else {
+		dev_info(dev, "EC %sabled\n",
+				enable ? "en" : "dis");
+	}
+
+	ACPI_FREE(obj);
+	return err;
+}
+
+static int atk_enumerate_new_hwmon(struct atk_data *data)
+{
+	struct device *dev = &data->acpi_dev->dev;
+	union acpi_object *pack;
+	int err;
+	int i;
+
+	err = atk_ec_present(data);
+	if (err < 0)
+		return err;
+	if (err) {
+		err = atk_ec_enabled(data);
+		if (err < 0)
+			return err;
+		/* If the EC was disabled we will disable it again on unload */
+		data->disable_ec = err;
+
+		err = atk_ec_ctl(data, 1);
+		if (err) {
+			data->disable_ec = false;
+			return err;
+		}
 	}
 
+	dev_dbg(dev, "Enumerating hwmon sensors\n");
+
+	pack = atk_ggrp(data, ATK_MUX_HWMON);
+	if (IS_ERR(pack))
+		return PTR_ERR(pack);
+
 	for (i = 0; i < pack->package.count; i++) {
 		union acpi_object *obj = &pack->package.elements[i];
 
@@ -758,8 +971,7 @@ static int atk_enumerate_new_hwmon(struct atk_data *data)
 
 	err = data->voltage_count + data->temperature_count + data->fan_count;
 
-out:
-	ACPI_FREE(buf.pointer);
+	ACPI_FREE(pack);
 	return err;
 }
 
@@ -895,6 +1107,15 @@ static int atk_check_new_if(struct atk_data *data)
 	}
 	data->read_handle = ret;
 
+	/* De-multiplexer (write) */
+	status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret);
+	if (status != AE_OK) {
+		dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
+				 acpi_format_exception(status));
+		return -ENODEV;
+	}
+	data->write_handle = ret;
+
 	return 0;
 }
 
@@ -915,6 +1136,7 @@ static int atk_add(struct acpi_device *device)
 	data->acpi_dev = device;
 	data->atk_handle = device->handle;
 	INIT_LIST_HEAD(&data->sensor_list);
+	data->disable_ec = false;
 
 	buf.length = ACPI_ALLOCATE_BUFFER;
 	ret = acpi_evaluate_object_typed(data->atk_handle, BOARD_ID, NULL,
@@ -973,6 +1195,8 @@ static int atk_add(struct acpi_device *device)
 cleanup:
 	atk_free_sensors(data);
 out:
+	if (data->disable_ec)
+		atk_ec_ctl(data, 0);
 	kfree(data);
 	return err;
 }
@@ -988,6 +1212,11 @@ static int atk_remove(struct acpi_device *device, int type)
 	atk_free_sensors(data);
 	hwmon_device_unregister(data->hwmon_dev);
 
+	if (data->disable_ec) {
+		if (atk_ec_ctl(data, 0))
+			dev_err(&device->dev, "Failed to disable EC\n");
+	}
+
 	kfree(data);
 
 	return 0;

drivers/hwmon/sht15.c

@@ -30,6 +30,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <linux/err.h>
@@ -622,7 +623,12 @@ static int __devexit sht15_remove(struct platform_device *pdev)
 }
 
 
-static struct platform_driver sht_drivers[] = {
+/*
+ * sht_drivers simultaneously refers to __devinit and __devexit function
+ * which causes spurious section mismatch warning. So use __refdata to
+ * get rid from this.
+ */
+static struct platform_driver __refdata sht_drivers[] = {
 	{
 		.driver = {
 			.name = "sht10",

drivers/ieee1394/raw1394.c

@@ -29,6 +29,7 @@
 
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/sched.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/fs.h>

drivers/ieee1394/video1394.c

@@ -30,6 +30,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/wait.h>

drivers/infiniband/core/iwcm.c

@@ -40,6 +40,7 @@
 #include <linux/idr.h>
 #include <linux/interrupt.h>
 #include <linux/rbtree.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/completion.h>

drivers/infiniband/core/ucma.c

@@ -34,6 +34,7 @@
 #include <linux/file.h>
 #include <linux/mutex.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/idr.h>
 #include <linux/in.h>
 #include <linux/in6.h>

drivers/infiniband/hw/cxgb3/iwch_provider.c

@@ -37,6 +37,7 @@
 #include <linux/delay.h>
 #include <linux/errno.h>
 #include <linux/list.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/ethtool.h>
 #include <linux/rtnetlink.h>

drivers/infiniband/hw/cxgb3/iwch_qp.c

@@ -29,6 +29,7 @@
  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  * SOFTWARE.
  */
+#include <linux/sched.h>
 #include "iwch_provider.h"
 #include "iwch.h"
 #include "iwch_cm.h"

drivers/infiniband/hw/ipath/ipath_driver.c

@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/idr.h>
 #include <linux/pci.h>

drivers/infiniband/hw/ipath/ipath_iba7220.c

@@ -37,6 +37,7 @@
 
 #include <linux/interrupt.h>
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <rdma/ib_verbs.h>

drivers/infiniband/hw/ipath/ipath_intr.c

@@ -33,6 +33,7 @@
 
 #include <linux/pci.h>
 #include <linux/delay.h>
+#include <linux/sched.h>
 
 #include "ipath_kernel.h"
 #include "ipath_verbs.h"

drivers/infiniband/hw/ipath/ipath_qp.c

@@ -32,6 +32,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/sched.h>
 #include <linux/vmalloc.h>
 
 #include "ipath_verbs.h"

drivers/infiniband/hw/ipath/ipath_ruc.c

@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 
 #include "ipath_verbs.h"

drivers/infiniband/hw/ipath/ipath_ud.c

@@ -31,6 +31,7 @@
  * SOFTWARE.
  */
 
+#include <linux/sched.h>
 #include <rdma/ib_smi.h>
 
 #include "ipath_verbs.h"

drivers/infiniband/hw/ipath/ipath_user_pages.c

@@ -33,6 +33,7 @@
 
 #include <linux/mm.h>
 #include <linux/device.h>
+#include <linux/sched.h>
 
 #include "ipath_kernel.h"
 

drivers/infiniband/hw/ipath/ipath_user_sdma.c

@@ -33,6 +33,7 @@
 #include <linux/types.h>
 #include <linux/device.h>
 #include <linux/dmapool.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/highmem.h>

drivers/infiniband/hw/ipath/ipath_verbs_mcast.c

@@ -32,6 +32,7 @@
  */
 
 #include <linux/rculist.h>
+#include <linux/sched.h>
 
 #include "ipath_verbs.h"
 

drivers/infiniband/ulp/iser/iscsi_iser.c

@@ -426,7 +426,7 @@ iscsi_iser_session_create(struct iscsi_endpoint *ep,
 	 * because we preallocate so many resources
 	 */
 	cls_session = iscsi_session_setup(&iscsi_iser_transport, shost,
-					  ISCSI_DEF_XMIT_CMDS_MAX,
+					  ISCSI_DEF_XMIT_CMDS_MAX, 0,
 					  sizeof(struct iscsi_iser_task),
 					  initial_cmdsn, 0);
 	if (!cls_session)

drivers/input/keyboard/hilkbd.c

@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/hil.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <asm/irq.h>
 #ifdef CONFIG_HP300

drivers/input/keyboard/sunkbd.c

@@ -27,6 +27,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>

drivers/input/serio/libps2.c

@@ -13,6 +13,7 @@
 
 #include <linux/delay.h>
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/input.h>

drivers/input/serio/serio_raw.c

@@ -9,6 +9,7 @@
  * the Free Software Foundation.
  */
 
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/poll.h>

drivers/input/serio/serport.c

@@ -15,6 +15,7 @@
 
 #include <asm/uaccess.h>
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>

drivers/isdn/capi/kcapi.c

@@ -18,6 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/proc_fs.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/skbuff.h>
 #include <linux/workqueue.h>

drivers/isdn/hisax/arcofi.c

@@ -10,6 +10,7 @@
  *
  */
  
+#include <linux/sched.h>
 #include "hisax.h"
 #include "isdnl1.h"
 #include "isac.h"

drivers/isdn/hisax/hfc_2bds0.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/sched.h>
 #include "hisax.h"
 #include "hfc_2bds0.h"
 #include "isdnl1.h"

drivers/isdn/hisax/hfc_pci.c

@@ -20,6 +20,7 @@
 #include "hfc_pci.h"
 #include "isdnl1.h"
 #include <linux/pci.h>
+#include <linux/sched.h>
 #include <linux/interrupt.h>
 
 static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";

drivers/isdn/hysdn/hysdn_procconf.c

@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/cred.h>
 #include <linux/module.h>
 #include <linux/poll.h>
 #include <linux/proc_fs.h>