iio: mxs-lradc: Check the return value from stmp_reset_block()

stmp_reset_block() may fail, so let's check its return value and propagate it in
the case of error.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/staging/iio/adc/mxs-lradc.c

@@ -841,14 +841,16 @@ static const struct iio_chan_spec mxs_lradc_chan_spec[] = {
 	MXS_ADC_CHAN(15, IIO_VOLTAGE),	/* VDD5V */
 };
 
-static void mxs_lradc_hw_init(struct mxs_lradc *lradc)
+static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
 {
 	/* The ADC always uses DELAY CHANNEL 0. */
 	const uint32_t adc_cfg =
 		(1 << (LRADC_DELAY_TRIGGER_DELAYS_OFFSET + 0)) |
 		(LRADC_DELAY_TIMER_PER << LRADC_DELAY_DELAY_OFFSET);
 
-	stmp_reset_block(lradc->base);
+	int ret = stmp_reset_block(lradc->base);
+	if (ret)
+		return ret;
 
 	/* Configure DELAY CHANNEL 0 for generic ADC sampling. */
 	writel(adc_cfg, lradc->base + LRADC_DELAY(0));
@@ -869,6 +871,8 @@ static void mxs_lradc_hw_init(struct mxs_lradc *lradc)
 
 	/* Start internal temperature sensing. */
 	writel(0, lradc->base + LRADC_CTRL2);
+
+	return 0;
 }
 
 static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
@@ -976,7 +980,9 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 		goto err_trig;
 
 	/* Configure the hardware. */
-	mxs_lradc_hw_init(lradc);
+	ret = mxs_lradc_hw_init(lradc);
+	if (ret)
+		goto err_dev;
 
 	/* Register the touchscreen input device. */
 	ret = mxs_lradc_ts_register(lradc);