sh: MS7712SE01 board support.

Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/Kconfig.debug

@@ -33,6 +33,7 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xffe00000" if CPU_SUBTYPE_SH7780
 	default "0xfffe9800" if CPU_SUBTYPE_SH7206
 	default "0xf8420000" if CPU_SUBTYPE_SH7619
+	default "0xa4400000" if CPU_SUBTYPE_SH7712
 	default "0xffe80000" if CPU_SH4
 
 config EARLY_PRINTK

arch/sh/boards/se/770x/io.c

@@ -27,6 +27,8 @@ int sh_pcic_io_dummy;
 static inline volatile __u16 *
 port2adr(unsigned int port)
 {
+	if (port & 0xff000000)
+		return ( volatile __u16 *) port;
 	if (port >= 0x2000)
 		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
 	else if (port >= 0x1000)

arch/sh/boards/se/770x/irq.c

@@ -55,6 +55,17 @@ void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
 }
 
 static struct ipr_data se770x_ipr_map[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	 */
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* This is default value */
 	{ 0xf-0x2, 0, 8,  0x2 , BCR_ILCRA},
@@ -81,8 +92,10 @@ static struct ipr_data se770x_ipr_map[] = {
 	{  4, 0,  4, 0x0f- 4 ,BCR_ILCRC},
 	{  3, 0,  0, 0x0f- 3 ,BCR_ILCRC},
 	{  1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+#if defined(CONFIG_STNIC)
 	/* ST NIC */
 	{ 10, 0,  4, 0x0f-10 ,BCR_ILCRD}, 	/* LAN */
+#endif
 	/* MRSHPC IRQs setting */
 	{  0, 0, 12, 0x0f- 0 ,BCR_ILCRE},	/* PCIRQ3 */
 	{ 11, 0,  8, 0x0f-11 ,BCR_ILCRE}, 	/* PCIRQ2 */
@@ -100,18 +113,6 @@ static struct ipr_data se770x_ipr_map[] = {
  */
 void __init init_se_IRQ(void)
 {
-        /*
-         * Super I/O (Just mimic PC):
-         *  1: keyboard
-         *  3: serial 0
-         *  4: serial 1
-         *  5: printer
-         *  6: floppy
-         *  8: rtc
-         * 12: mouse
-         * 14: ide0
-         */
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* Disable all interrupts */
 	ctrl_outw(0, BCR_ILCRA);
 	ctrl_outw(0, BCR_ILCRB);
@@ -120,6 +121,6 @@ void __init init_se_IRQ(void)
 	ctrl_outw(0, BCR_ILCRE);
 	ctrl_outw(0, BCR_ILCRF);
 	ctrl_outw(0, BCR_ILCRG);
-#endif
+
 	make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
 }

arch/sh/boards/se/770x/setup.c

@@ -117,7 +117,7 @@ static int __init se_devices_setup(void)
 {
 	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
 }
-__initcall(se_devices_setup);
+device_initcall(se_devices_setup);
 
 /*
  * The Machine Vector
@@ -133,6 +133,8 @@ struct sh_machine_vector mv_se __initmv = {
 	.mv_nr_irqs		= 61,
 #elif defined(CONFIG_CPU_SUBTYPE_SH7705)
 	.mv_nr_irqs		= 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+	.mv_nr_irqs             = 104,
 #endif
 
 	.mv_inb			= se_inb,

arch/sh/kernel/cpu/sh3/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7708)	+= setup-sh7708.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7709)	+= setup-sh7709.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7300)	+= setup-sh7300.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7710)	+= setup-sh7710.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7712)	+= setup-sh7710.o
 
 # Primary on-chip clocks (common)
 clock-$(CONFIG_CPU_SH3)			:= clock-sh3.o

arch/sh/kernel/cpu/sh3/probe.c

@@ -78,6 +78,9 @@ int __init detect_cpu_and_cache_system(void)
 #if defined(CONFIG_CPU_SUBTYPE_SH7710)
 		current_cpu_data.type = CPU_SH7710;
 #endif
+#if defined(CONFIG_CPU_SUBTYPE_SH7712)
+		current_cpu_data.type = CPU_SH7712;
+#endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 		current_cpu_data.type = CPU_SH7705;
 

arch/sh/kernel/cpu/sh3/setup-sh7710.c

@@ -2,6 +2,7 @@
  * SH7710 Setup
  *
  *  Copyright (C) 2006  Paul Mundt
+ *  Copyright (C) 2007  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -19,6 +20,12 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 52, 53, 55, 54 },
 	}, {
+		.mapbase	= 0xa4420000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs           = { 56, 57, 59, 58 },
+	}, {
+
 		.flags = 0,
 	}
 };
@@ -41,3 +48,56 @@ static int __init sh7710_devices_setup(void)
 				    ARRAY_SIZE(sh7710_devices));
 }
 __initcall(sh7710_devices_setup);
+
+static struct ipr_data sh7710_ipr_map[] = {
+	/* IRQ, IPR-idx, shift, priority */
+	{ 16, 0, 12, 2 }, /* TMU0 TUNI*/
+	{ 17, 0,  8, 2 }, /* TMU1 TUNI */
+	{ 18, 0,  4, 2 }, /* TMU2 TUNI */
+	{ 27, 1, 12, 2 }, /* WDT ITI */
+	{ 20, 0,  0, 2 }, /* RTC ATI (alarm) */
+	{ 21, 0,  0, 2 }, /* RTC PRI (period) */
+	{ 22, 0,  0, 2 }, /* RTC CUI (carry) */
+	{ 48, 4, 12, 7 }, /* DMAC DMTE0 */
+	{ 49, 4, 12, 7 }, /* DMAC DMTE1 */
+	{ 50, 4, 12, 7 }, /* DMAC DMTE2 */
+	{ 51, 4, 12, 7 }, /* DMAC DMTE3 */
+	{ 52, 4,  8, 3 }, /* SCIF0 ERI */
+	{ 53, 4,  8, 3 }, /* SCIF0 RXI */
+	{ 54, 4,  8, 3 }, /* SCIF0 BRI */
+	{ 55, 4,  8, 3 }, /* SCIF0 TXI */
+	{ 56, 4,  4, 3 }, /* SCIF1 ERI */
+	{ 57, 4,  4, 3 }, /* SCIF1 RXI */
+	{ 58, 4,  4, 3 }, /* SCIF1 BRI */
+	{ 59, 4,  4, 3 }, /* SCIF1 TXI */
+	{ 76, 5,  8, 7 }, /* DMAC DMTE4 */
+	{ 77, 5,  8, 7 }, /* DMAC DMTE5 */
+	{ 80, 6, 12, 5 }, /* EDMAC EINT0 */
+	{ 81, 6,  8, 5 }, /* EDMAC EINT1 */
+	{ 82, 6,  4, 5 }, /* EDMAC EINT2 */
+};
+
+static unsigned long ipr_offsets[] = {
+	0xA414FEE2	/* 0: IPRA */
+,	0xA414FEE4	/* 1: IPRB */
+,	0xA4140016	/* 2: IPRC */
+,	0xA4140018	/* 3: IPRD */
+,	0xA414001A	/* 4: IPRE */
+,	0xA4080000	/* 5: IPRF */
+,	0xA4080002	/* 6: IPRG */
+,	0xA4080004	/* 7: IPRH */
+,	0xA4080006	/* 8: IPRI */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (idx >= ARRAY_SIZE(ipr_offsets))
+		return 0;
+	return ipr_offsets[idx];
+}
+
+void __init init_IRQ_ipr()
+{
+	make_ipr_irq(sh7710_ipr_map, ARRAY_SIZE(sh7710_ipr_map));
+}

arch/sh/kernel/process.c

@@ -299,7 +299,8 @@ static void ubc_set_tracing(int asid, unsigned long pc)
 	ctrl_outl(0, UBC_BAMRA);
 
 	if (current_cpu_data.type == CPU_SH7729 ||
-	    current_cpu_data.type == CPU_SH7710) {
+	    current_cpu_data.type == CPU_SH7710 || 
+	    current_cpu_data.type == CPU_SH7712 ) {
 		ctrl_outw(BBR_INST | BBR_READ | BBR_CPU, UBC_BBRA);
 		ctrl_outl(BRCR_PCBA | BRCR_PCTE, UBC_BRCR);
 	} else {

arch/sh/kernel/setup.c

@@ -377,6 +377,7 @@ static const char *cpu_name[] = {
 	[CPU_SH7705]	= "SH7705",	[CPU_SH7706]	= "SH7706",
 	[CPU_SH7707]	= "SH7707",	[CPU_SH7708]	= "SH7708",
 	[CPU_SH7709]	= "SH7709",	[CPU_SH7710]	= "SH7710",
+	[CPU_SH7712]	= "SH7712",
 	[CPU_SH7729]	= "SH7729",	[CPU_SH7750]	= "SH7750",
 	[CPU_SH7750S]	= "SH7750S",	[CPU_SH7750R]	= "SH7750R",
 	[CPU_SH7751]	= "SH7751",	[CPU_SH7751R]	= "SH7751R",

arch/sh/mm/Kconfig

@@ -101,9 +101,17 @@ config CPU_SUBTYPE_SH7709
 config CPU_SUBTYPE_SH7710
 	bool "Support SH7710 processor"
 	select CPU_SH3
+	select CPU_HAS_IPR_IRQ
 	help
 	  Select SH7710 if you have a SH3-DSP SH7710 CPU.
 
+config CPU_SUBTYPE_SH7712
+	bool "Support SH7712 processor"
+	select CPU_SH3
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SH7712 if you have a SH3-DSP SH7712 CPU.
+
 comment "SH-4 Processor Support"
 
 config CPU_SUBTYPE_SH7750

drivers/serial/sh-sci.c

@@ -284,12 +284,23 @@ static void sci_init_pins_irda(struct uart_port *port, unsigned int cflag)
 #endif
 
 #if defined(SCIF_ONLY) || defined(SCI_AND_SCIF)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7300) 
 /* SH7300 doesn't use RTS/CTS */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
 	sci_out(port, SCFCR, 0);
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+static void sci_init_pins_scif(struct uart_port* port, unsigned int cflag)
+{
+	unsigned int fcr_val = 0;
+
+	set_sh771x_scif_pfc(port);
+	if (cflag & CRTSCTS) {
+		fcr_val |= SCFCR_MCE;
+	}
+	sci_out(port, SCFCR, fcr_val);
+}
 #elif defined(CONFIG_CPU_SH3)
 /* For SH7705, SH7706, SH7707, SH7709, SH7709A, SH7729 */
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)

drivers/serial/sh-sci.h

@@ -73,9 +73,13 @@
 # define SCPDR  0xA4050136        /* 16 bit SCIF */
 # define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
 # define SCIF_ONLY
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) 
 # define SCSPTR0 0xA4400000	  /* 16 bit SCIF */
-# define SCSCR_INIT(port)  0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */
+# define SCI_NPORTS 2
+# define SCIF_ORER 0x0001   /* overrun error bit */
+# define PACR 0xa4050100
+# define PBCR 0xa4050102
+# define SCSCR_INIT(port)          0x3B
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH73180)
 # define SCPDR  0xA4050138        /* 16 bit SCIF */
@@ -346,9 +350,15 @@
   }
 
 #ifdef CONFIG_CPU_SH3
-#if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710)
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
+		                sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
+		                 h8_sci_offset, h8_sci_size) \
+  CPU_SCIx_FNS(name, sh4_sci_offset, sh4_sci_size, sh4_scif_offset, sh4_scif_size)
+#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size) \
+	  CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7705) 
 #define SCIF_FNS(name, scif_offset, scif_size) \
   CPU_SCIF_FNS(name, scif_offset, scif_size)
 #else
@@ -375,8 +385,8 @@
 #endif
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7300) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7705) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7710)
+    defined(CONFIG_CPU_SUBTYPE_SH7705) 
+
 SCIF_FNS(SCSMR,  0x00, 16)
 SCIF_FNS(SCBRR,  0x04,  8)
 SCIF_FNS(SCSCR,  0x08, 16)
@@ -486,13 +496,24 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inb(SCPDR)&0x10 ? 1 : 0; /* SCIF */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
 static inline int sci_rxd_in(struct uart_port *port)
 {
-	if (port->mapbase == SCSPTR0)
-		return ctrl_inw(SCSPTR0 + 0x10) & 0x01 ? 1 : 0;
-	return 1;
+	  return sci_in(port,SCxSR)&0x0010 ? 1 : 0;
+}
+static inline void set_sh771x_scif_pfc(struct uart_port *port)
+{
+	if (port->mapbase == 0xA4400000){
+		ctrl_outw(ctrl_inw(PACR)&0xffc0,PACR);
+		ctrl_outw(ctrl_inw(PBCR)&0x0fff,PBCR);
+		return;
+	}
+	if (port->mapbase == 0xA4410000){
+		ctrl_outw(ctrl_inw(PBCR)&0xf003,PBCR);
+		return;
+	}
 }
+
 #elif defined(CONFIG_CPU_SUBTYPE_SH7750) || \
       defined(CONFIG_CPU_SUBTYPE_SH7751) || \
       defined(CONFIG_CPU_SUBTYPE_SH4_202)

include/asm-sh/cpu-sh3/mmu_context.h

@@ -32,6 +32,7 @@
     defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7300) || \
     defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712) || \
     defined(CONFIG_CPU_SUBTYPE_SH7710)
 #define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
 #else

include/asm-sh/processor.h

@@ -44,7 +44,7 @@ enum cpu_type {
 	/* SH-3 types */
 	CPU_SH7705, CPU_SH7706, CPU_SH7707,
 	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
-	CPU_SH7709, CPU_SH7709A, CPU_SH7710,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
 	CPU_SH7729, CPU_SH7300,
 
 	/* SH-4 types */

include/asm-sh/se.h

@@ -73,6 +73,7 @@
 #else
 #define IRQ_STNIC	10
 #endif
+#define IRQ_CFCARD    7
 
 #define __IO_PREFIX	se
 #include <asm/io_generic.h>