|
@@ -0,0 +1,347 @@
|
|
|
|
+/* tmp421.c
|
|
|
|
+ *
|
|
|
|
+ * Copyright (C) 2009 Andre Prendel <andre.prendel@gmx.de>
|
|
|
|
+ * Preliminary support by:
|
|
|
|
+ * Melvin Rook, Raymond Ng
|
|
|
|
+ *
|
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
|
+ * it under the terms of the GNU General Public License as published by
|
|
|
|
+ * the Free Software Foundation; either version 2 of the License, or
|
|
|
|
+ * (at your option) any later version.
|
|
|
|
+ *
|
|
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
+ * GNU General Public License for more details.
|
|
|
|
+ *
|
|
|
|
+ * You should have received a copy of the GNU General Public License
|
|
|
|
+ * along with this program; if not, write to the Free Software
|
|
|
|
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+/*
|
|
|
|
+ * Driver for the Texas Instruments TMP421 SMBus temperature sensor IC.
|
|
|
|
+ * Supported models: TMP421, TMP422, TMP423
|
|
|
|
+ */
|
|
|
|
+
|
|
|
|
+#include <linux/module.h>
|
|
|
|
+#include <linux/init.h>
|
|
|
|
+#include <linux/slab.h>
|
|
|
|
+#include <linux/jiffies.h>
|
|
|
|
+#include <linux/i2c.h>
|
|
|
|
+#include <linux/hwmon.h>
|
|
|
|
+#include <linux/hwmon-sysfs.h>
|
|
|
|
+#include <linux/err.h>
|
|
|
|
+#include <linux/mutex.h>
|
|
|
|
+#include <linux/sysfs.h>
|
|
|
|
+
|
|
|
|
+/* Addresses to scan */
|
|
|
|
+static unsigned short normal_i2c[] = { 0x2a, 0x4c, 0x4d, 0x4e, 0x4f,
|
|
|
|
+ I2C_CLIENT_END };
|
|
|
|
+
|
|
|
|
+/* Insmod parameters */
|
|
|
|
+I2C_CLIENT_INSMOD_3(tmp421, tmp422, tmp423);
|
|
|
|
+
|
|
|
|
+/* The TMP421 registers */
|
|
|
|
+#define TMP421_CONFIG_REG_1 0x09
|
|
|
|
+#define TMP421_CONVERSION_RATE_REG 0x0B
|
|
|
|
+#define TMP421_MANUFACTURER_ID_REG 0xFE
|
|
|
|
+#define TMP421_DEVICE_ID_REG 0xFF
|
|
|
|
+
|
|
|
|
+static const u8 TMP421_TEMP_MSB[4] = { 0x00, 0x01, 0x02, 0x03 };
|
|
|
|
+static const u8 TMP421_TEMP_LSB[4] = { 0x10, 0x11, 0x12, 0x13 };
|
|
|
|
+
|
|
|
|
+/* Flags */
|
|
|
|
+#define TMP421_CONFIG_SHUTDOWN 0x40
|
|
|
|
+#define TMP421_CONFIG_RANGE 0x04
|
|
|
|
+
|
|
|
|
+/* Manufacturer / Device ID's */
|
|
|
|
+#define TMP421_MANUFACTURER_ID 0x55
|
|
|
|
+#define TMP421_DEVICE_ID 0x21
|
|
|
|
+#define TMP422_DEVICE_ID 0x22
|
|
|
|
+#define TMP423_DEVICE_ID 0x23
|
|
|
|
+
|
|
|
|
+static const struct i2c_device_id tmp421_id[] = {
|
|
|
|
+ { "tmp421", tmp421 },
|
|
|
|
+ { "tmp422", tmp422 },
|
|
|
|
+ { "tmp423", tmp423 },
|
|
|
|
+ { }
|
|
|
|
+};
|
|
|
|
+MODULE_DEVICE_TABLE(i2c, tmp421_id);
|
|
|
|
+
|
|
|
|
+struct tmp421_data {
|
|
|
|
+ struct device *hwmon_dev;
|
|
|
|
+ struct mutex update_lock;
|
|
|
|
+ char valid;
|
|
|
|
+ unsigned long last_updated;
|
|
|
|
+ int kind;
|
|
|
|
+ u8 config;
|
|
|
|
+ s16 temp[4];
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int temp_from_s16(s16 reg)
|
|
|
|
+{
|
|
|
|
+ int temp = reg;
|
|
|
|
+
|
|
|
|
+ return (temp * 1000 + 128) / 256;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int temp_from_u16(u16 reg)
|
|
|
|
+{
|
|
|
|
+ int temp = reg;
|
|
|
|
+
|
|
|
|
+ /* Add offset for extended temperature range. */
|
|
|
|
+ temp -= 64 * 256;
|
|
|
|
+
|
|
|
|
+ return (temp * 1000 + 128) / 256;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct tmp421_data *tmp421_update_device(struct device *dev)
|
|
|
|
+{
|
|
|
|
+ struct i2c_client *client = to_i2c_client(dev);
|
|
|
|
+ struct tmp421_data *data = i2c_get_clientdata(client);
|
|
|
|
+ int i;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&data->update_lock);
|
|
|
|
+
|
|
|
|
+ if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
|
|
|
|
+ data->config = i2c_smbus_read_byte_data(client,
|
|
|
|
+ TMP421_CONFIG_REG_1);
|
|
|
|
+
|
|
|
|
+ for (i = 0; i <= data->kind; i++) {
|
|
|
|
+ data->temp[i] = i2c_smbus_read_byte_data(client,
|
|
|
|
+ TMP421_TEMP_MSB[i]) << 8;
|
|
|
|
+ data->temp[i] |= i2c_smbus_read_byte_data(client,
|
|
|
|
+ TMP421_TEMP_LSB[i]);
|
|
|
|
+ }
|
|
|
|
+ data->last_updated = jiffies;
|
|
|
|
+ data->valid = 1;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ mutex_unlock(&data->update_lock);
|
|
|
|
+
|
|
|
|
+ return data;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static ssize_t show_temp_value(struct device *dev,
|
|
|
|
+ struct device_attribute *devattr, char *buf)
|
|
|
|
+{
|
|
|
|
+ int index = to_sensor_dev_attr(devattr)->index;
|
|
|
|
+ struct tmp421_data *data = tmp421_update_device(dev);
|
|
|
|
+ int temp;
|
|
|
|
+
|
|
|
|
+ mutex_lock(&data->update_lock);
|
|
|
|
+ if (data->config & TMP421_CONFIG_RANGE)
|
|
|
|
+ temp = temp_from_u16(data->temp[index]);
|
|
|
|
+ else
|
|
|
|
+ temp = temp_from_s16(data->temp[index]);
|
|
|
|
+ mutex_unlock(&data->update_lock);
|
|
|
|
+
|
|
|
|
+ return sprintf(buf, "%d\n", temp);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static ssize_t show_fault(struct device *dev,
|
|
|
|
+ struct device_attribute *devattr, char *buf)
|
|
|
|
+{
|
|
|
|
+ int index = to_sensor_dev_attr(devattr)->index;
|
|
|
|
+ struct tmp421_data *data = tmp421_update_device(dev);
|
|
|
|
+
|
|
|
|
+ /*
|
|
|
|
+ * The OPEN bit signals a fault. This is bit 0 of the temperature
|
|
|
|
+ * register (low byte).
|
|
|
|
+ */
|
|
|
|
+ if (data->temp[index] & 0x01)
|
|
|
|
+ return sprintf(buf, "1\n");
|
|
|
|
+ else
|
|
|
|
+ return sprintf(buf, "0\n");
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static mode_t tmp421_is_visible(struct kobject *kobj, struct attribute *a,
|
|
|
|
+ int n)
|
|
|
|
+{
|
|
|
|
+ struct device *dev = container_of(kobj, struct device, kobj);
|
|
|
|
+ struct tmp421_data *data = dev_get_drvdata(dev);
|
|
|
|
+ struct device_attribute *devattr;
|
|
|
|
+ unsigned int index;
|
|
|
|
+
|
|
|
|
+ devattr = container_of(a, struct device_attribute, attr);
|
|
|
|
+ index = to_sensor_dev_attr(devattr)->index;
|
|
|
|
+
|
|
|
|
+ if (data->kind > index)
|
|
|
|
+ return a->mode;
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_value, NULL, 0);
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_value, NULL, 1);
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_fault, NULL, 1);
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp_value, NULL, 2);
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_fault, NULL, 2);
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp4_input, S_IRUGO, show_temp_value, NULL, 3);
|
|
|
|
+static SENSOR_DEVICE_ATTR(temp4_fault, S_IRUGO, show_fault, NULL, 3);
|
|
|
|
+
|
|
|
|
+static struct attribute *tmp421_attr[] = {
|
|
|
|
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
|
|
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
|
|
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
|
|
|
|
+ &sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
|
|
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
|
|
|
|
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
|
|
|
|
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
|
|
|
|
+ NULL
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static const struct attribute_group tmp421_group = {
|
|
|
|
+ .attrs = tmp421_attr,
|
|
|
|
+ .is_visible = tmp421_is_visible,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int tmp421_init_client(struct i2c_client *client)
|
|
|
|
+{
|
|
|
|
+ int config, config_orig;
|
|
|
|
+
|
|
|
|
+ /* Set the conversion rate to 2 Hz */
|
|
|
|
+ i2c_smbus_write_byte_data(client, TMP421_CONVERSION_RATE_REG, 0x05);
|
|
|
|
+
|
|
|
|
+ /* Start conversions (disable shutdown if necessary) */
|
|
|
|
+ config = i2c_smbus_read_byte_data(client, TMP421_CONFIG_REG_1);
|
|
|
|
+ if (config < 0) {
|
|
|
|
+ dev_err(&client->dev, "Could not read configuration"
|
|
|
|
+ " register (%d)\n", config);
|
|
|
|
+ return -ENODEV;
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ config_orig = config;
|
|
|
|
+ config &= ~TMP421_CONFIG_SHUTDOWN;
|
|
|
|
+
|
|
|
|
+ if (config != config_orig) {
|
|
|
|
+ dev_info(&client->dev, "Enable monitoring chip\n");
|
|
|
|
+ i2c_smbus_write_byte_data(client, TMP421_CONFIG_REG_1, config);
|
|
|
|
+ }
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int tmp421_detect(struct i2c_client *client, int kind,
|
|
|
|
+ struct i2c_board_info *info)
|
|
|
|
+{
|
|
|
|
+ struct i2c_adapter *adapter = client->adapter;
|
|
|
|
+ const char *names[] = { "TMP421", "TMP422", "TMP423" };
|
|
|
|
+
|
|
|
|
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
|
|
+ return -ENODEV;
|
|
|
|
+
|
|
|
|
+ if (kind <= 0) {
|
|
|
|
+ u8 reg;
|
|
|
|
+
|
|
|
|
+ reg = i2c_smbus_read_byte_data(client,
|
|
|
|
+ TMP421_MANUFACTURER_ID_REG);
|
|
|
|
+ if (reg != TMP421_MANUFACTURER_ID)
|
|
|
|
+ return -ENODEV;
|
|
|
|
+
|
|
|
|
+ reg = i2c_smbus_read_byte_data(client,
|
|
|
|
+ TMP421_DEVICE_ID_REG);
|
|
|
|
+ switch (reg) {
|
|
|
|
+ case TMP421_DEVICE_ID:
|
|
|
|
+ kind = tmp421;
|
|
|
|
+ break;
|
|
|
|
+ case TMP422_DEVICE_ID:
|
|
|
|
+ kind = tmp422;
|
|
|
|
+ break;
|
|
|
|
+ case TMP423_DEVICE_ID:
|
|
|
|
+ kind = tmp423;
|
|
|
|
+ break;
|
|
|
|
+ default:
|
|
|
|
+ return -ENODEV;
|
|
|
|
+ }
|
|
|
|
+ }
|
|
|
|
+ strlcpy(info->type, tmp421_id[kind - 1].name, I2C_NAME_SIZE);
|
|
|
|
+ dev_info(&adapter->dev, "Detected TI %s chip at 0x%02x\n",
|
|
|
|
+ names[kind - 1], client->addr);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int tmp421_probe(struct i2c_client *client,
|
|
|
|
+ const struct i2c_device_id *id)
|
|
|
|
+{
|
|
|
|
+ struct tmp421_data *data;
|
|
|
|
+ int err;
|
|
|
|
+
|
|
|
|
+ data = kzalloc(sizeof(struct tmp421_data), GFP_KERNEL);
|
|
|
|
+ if (!data)
|
|
|
|
+ return -ENOMEM;
|
|
|
|
+
|
|
|
|
+ i2c_set_clientdata(client, data);
|
|
|
|
+ mutex_init(&data->update_lock);
|
|
|
|
+ data->kind = id->driver_data;
|
|
|
|
+
|
|
|
|
+ err = tmp421_init_client(client);
|
|
|
|
+ if (err)
|
|
|
|
+ goto exit_free;
|
|
|
|
+
|
|
|
|
+ err = sysfs_create_group(&client->dev.kobj, &tmp421_group);
|
|
|
|
+ if (err)
|
|
|
|
+ goto exit_free;
|
|
|
|
+
|
|
|
|
+ data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
|
|
+ if (IS_ERR(data->hwmon_dev)) {
|
|
|
|
+ err = PTR_ERR(data->hwmon_dev);
|
|
|
|
+ data->hwmon_dev = NULL;
|
|
|
|
+ goto exit_remove;
|
|
|
|
+ }
|
|
|
|
+ return 0;
|
|
|
|
+
|
|
|
|
+exit_remove:
|
|
|
|
+ sysfs_remove_group(&client->dev.kobj, &tmp421_group);
|
|
|
|
+
|
|
|
|
+exit_free:
|
|
|
|
+ i2c_set_clientdata(client, NULL);
|
|
|
|
+ kfree(data);
|
|
|
|
+
|
|
|
|
+ return err;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static int tmp421_remove(struct i2c_client *client)
|
|
|
|
+{
|
|
|
|
+ struct tmp421_data *data = i2c_get_clientdata(client);
|
|
|
|
+
|
|
|
|
+ hwmon_device_unregister(data->hwmon_dev);
|
|
|
|
+ sysfs_remove_group(&client->dev.kobj, &tmp421_group);
|
|
|
|
+
|
|
|
|
+ i2c_set_clientdata(client, NULL);
|
|
|
|
+ kfree(data);
|
|
|
|
+
|
|
|
|
+ return 0;
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static struct i2c_driver tmp421_driver = {
|
|
|
|
+ .class = I2C_CLASS_HWMON,
|
|
|
|
+ .driver = {
|
|
|
|
+ .name = "tmp421",
|
|
|
|
+ },
|
|
|
|
+ .probe = tmp421_probe,
|
|
|
|
+ .remove = tmp421_remove,
|
|
|
|
+ .id_table = tmp421_id,
|
|
|
|
+ .detect = tmp421_detect,
|
|
|
|
+ .address_data = &addr_data,
|
|
|
|
+};
|
|
|
|
+
|
|
|
|
+static int __init tmp421_init(void)
|
|
|
|
+{
|
|
|
|
+ return i2c_add_driver(&tmp421_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+static void __exit tmp421_exit(void)
|
|
|
|
+{
|
|
|
|
+ i2c_del_driver(&tmp421_driver);
|
|
|
|
+}
|
|
|
|
+
|
|
|
|
+MODULE_AUTHOR("Andre Prendel <andre.prendel@gmx.de>");
|
|
|
|
+MODULE_DESCRIPTION("Texas Instruments TMP421/422/423 temperature sensor"
|
|
|
|
+ " driver");
|
|
|
|
+MODULE_LICENSE("GPL");
|
|
|
|
+
|
|
|
|
+module_init(tmp421_init);
|
|
|
|
+module_exit(tmp421_exit);
|