Merge branch 'linus' into perfcounters/core

Conflicts:
	arch/x86/kernel/irqinit.c
	arch/x86/kernel/irqinit_64.c
	arch/x86/kernel/traps.c
	arch/x86/mm/fault.c
	include/linux/sched.h
	kernel/exit.c

Documentation/ABI/testing/sysfs-devices-cache_disable

@@ -0,0 +1,18 @@
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com

Documentation/DMA-API.txt

@@ -704,12 +704,24 @@ this directory the following files can currently be found:
 				The current number of free dma_debug_entries
 				in the allocator.
 
+	dma-api/driver-filter
+				You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+
 If you have this code compiled into your kernel it will be enabled by default.
 If you want to boot without the bookkeeping anyway you can provide
 'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
 Notice that you can not enable it again at runtime. You have to reboot to do
 so.
 
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
 When the code disables itself at runtime this is most likely because it ran
 out of dma_debug_entries. These entries are preallocated at boot. The number
 of preallocated entries is defined per architecture. If it is too low for you

Documentation/DocBook/Makefile

@@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
 	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
 	    mac80211.xml debugobjects.xml sh.xml regulator.xml \
-	    alsa-driver-api.xml writing-an-alsa-driver.xml
+	    alsa-driver-api.xml writing-an-alsa-driver.xml \
+	    tracepoint.xml
 
 ###
 # The build process is as follows (targets):

Documentation/DocBook/tracepoint.tmpl

@@ -0,0 +1,89 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="Tracepoints">
+ <bookinfo>
+  <title>The Linux Kernel Tracepoint API</title>
+
+  <authorgroup>
+   <author>
+    <firstname>Jason</firstname>
+    <surname>Baron</surname>
+    <affiliation>
+     <address>
+      <email>jbaron@redhat.com</email>
+     </address>
+    </affiliation>
+   </author>
+  </authorgroup>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of Linux.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+ <toc></toc>
+  <chapter id="intro">
+   <title>Introduction</title>
+   <para>
+     Tracepoints are static probe points that are located in strategic points
+     throughout the kernel. 'Probes' register/unregister with tracepoints
+     via a callback mechanism. The 'probes' are strictly typed functions that
+     are passed a unique set of parameters defined by each tracepoint.
+   </para>
+
+   <para>
+     From this simple callback mechanism, 'probes' can be used to profile, debug,
+     and understand kernel behavior. There are a number of tools that provide a
+     framework for using 'probes'. These tools include Systemtap, ftrace, and
+     LTTng.
+   </para>
+
+   <para>
+     Tracepoints are defined in a number of header files via various macros. Thus,
+     the purpose of this document is to provide a clear accounting of the available
+     tracepoints. The intention is to understand not only what tracepoints are
+     available but also to understand where future tracepoints might be added.
+   </para>
+
+   <para>
+     The API presented has functions of the form:
+     <function>trace_tracepointname(function parameters)</function>. These are the
+     tracepoints callbacks that are found throughout the code. Registering and
+     unregistering probes with these callback sites is covered in the
+     <filename>Documentation/trace/*</filename> directory.
+   </para>
+  </chapter>
+
+  <chapter id="irq">
+   <title>IRQ</title>
+!Iinclude/trace/events/irq.h
+  </chapter>
+
+</book>

Documentation/RCU/trace.txt

@@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
 The output of "cat rcu/rcudata" looks as follows:
 
 rcu:
-  0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
-  1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
-  2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
-  3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
-  4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
-  5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
-  6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
-  7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
+rcu:
+  0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
+  1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
+  2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
+  3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
+  4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
+  5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
+  6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
+  7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
 rcu_bh:
-  0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
-  1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
-  2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
-  3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
-  4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
-  6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
-  7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
+  0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
+  1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
+  2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
+  4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
+  7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
 The first section lists the rcu_data structures for rcu, the second for
 rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
@@ -253,12 +254,6 @@ o	"pqc" indicates which grace period the last-observed quiescent
 o	"qp" indicates that RCU still expects a quiescent state from
 	this CPU.
 
-o	"rpfq" is the number of rcu_pending() calls on this CPU required
-	to induce this CPU to invoke force_quiescent_state().
-
-o	"rp" is low-order four hex digits of the count of how many times
-	rcu_pending() has been invoked on this CPU.
-
 o	"dt" is the current value of the dyntick counter that is incremented
 	when entering or leaving dynticks idle state, either by the
 	scheduler or by irq.  The number after the "/" is the interrupt
@@ -305,6 +300,9 @@ o	"b" is the batch limit for this CPU.  If more than this number
 	of RCU callbacks is ready to invoke, then the remainder will
 	be deferred.
 
+There is also an rcu/rcudata.csv file with the same information in
+comma-separated-variable spreadsheet format.
+
 
 The output of "cat rcu/rcugp" looks as follows:
 
@@ -411,3 +409,63 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		For example, the first entry at the lowest level shows
 		"^0", indicating that it corresponds to bit zero in
 		the first entry at the middle level.
+
+
+The output of "cat rcu/rcu_pending" looks as follows:
+
+rcu:
+  0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+  1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+  2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+  3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+  4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+  5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+  6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+  7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
+rcu_bh:
+  0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+  1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+  2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+  3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+  4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+  5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+  6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+  7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
+
+As always, this is once again split into "rcu" and "rcu_bh" portions.
+The fields are as follows:
+
+o	"np" is the number of times that __rcu_pending() has been invoked
+	for the corresponding flavor of RCU.
+
+o	"qsp" is the number of times that the RCU was waiting for a
+	quiescent state from this CPU.
+
+o	"cbr" is the number of times that this CPU had RCU callbacks
+	that had passed through a grace period, and were thus ready
+	to be invoked.
+
+o	"cng" is the number of times that this CPU needed another
+	grace period while RCU was idle.
+
+o	"gpc" is the number of times that an old grace period had
+	completed, but this CPU was not yet aware of it.
+
+o	"gps" is the number of times that a new grace period had started,
+	but this CPU was not yet aware of it.
+
+o	"nf" is the number of times that this CPU suspected that the
+	current grace period had run for too long, and thus needed to
+	be forced.
+
+	Please note that "forcing" consists of sending resched IPIs
+	to holdout CPUs.  If that CPU really still is in an old RCU
+	read-side critical section, then we really do have to wait for it.
+	The assumption behing "forcing" is that the CPU is not still in
+	an old RCU read-side critical section, but has not yet responded
+	for some other reason.
+
+o	"nn" is the number of times that this CPU needed nothing.  Alert
+	readers will note that the rcu "nn" number for a given CPU very
+	closely matches the rcu_bh "np" number for that same CPU.  This
+	is due to short-circuit evaluation in rcu_pending().

Documentation/futex-requeue-pi.txt

@@ -0,0 +1,131 @@
+Futex Requeue PI
+----------------
+
+Requeueing of tasks from a non-PI futex to a PI futex requires
+special handling in order to ensure the underlying rt_mutex is never
+left without an owner if it has waiters; doing so would break the PI
+boosting logic [see rt-mutex-desgin.txt] For the purposes of
+brevity, this action will be referred to as "requeue_pi" throughout
+this document.  Priority inheritance is abbreviated throughout as
+"PI".
+
+Motivation
+----------
+
+Without requeue_pi, the glibc implementation of
+pthread_cond_broadcast() must resort to waking all the tasks waiting
+on a pthread_condvar and letting them try to sort out which task
+gets to run first in classic thundering-herd formation.  An ideal
+implementation would wake the highest-priority waiter, and leave the
+rest to the natural wakeup inherent in unlocking the mutex
+associated with the condvar.
+
+Consider the simplified glibc calls:
+
+/* caller must lock mutex */
+pthread_cond_wait(cond, mutex)
+{
+	lock(cond->__data.__lock);
+	unlock(mutex);
+	do {
+	   unlock(cond->__data.__lock);
+	   futex_wait(cond->__data.__futex);
+	   lock(cond->__data.__lock);
+	} while(...)
+	unlock(cond->__data.__lock);
+	lock(mutex);
+}
+
+pthread_cond_broadcast(cond)
+{
+	lock(cond->__data.__lock);
+	unlock(cond->__data.__lock);
+	futex_requeue(cond->data.__futex, cond->mutex);
+}
+
+Once pthread_cond_broadcast() requeues the tasks, the cond->mutex
+has waiters. Note that pthread_cond_wait() attempts to lock the
+mutex only after it has returned to user space.  This will leave the
+underlying rt_mutex with waiters, and no owner, breaking the
+previously mentioned PI-boosting algorithms.
+
+In order to support PI-aware pthread_condvar's, the kernel needs to
+be able to requeue tasks to PI futexes.  This support implies that
+upon a successful futex_wait system call, the caller would return to
+user space already holding the PI futex.  The glibc implementation
+would be modified as follows:
+
+
+/* caller must lock mutex */
+pthread_cond_wait_pi(cond, mutex)
+{
+	lock(cond->__data.__lock);
+	unlock(mutex);
+	do {
+	   unlock(cond->__data.__lock);
+	   futex_wait_requeue_pi(cond->__data.__futex);
+	   lock(cond->__data.__lock);
+	} while(...)
+	unlock(cond->__data.__lock);
+        /* the kernel acquired the the mutex for us */
+}
+
+pthread_cond_broadcast_pi(cond)
+{
+	lock(cond->__data.__lock);
+	unlock(cond->__data.__lock);
+	futex_requeue_pi(cond->data.__futex, cond->mutex);
+}
+
+The actual glibc implementation will likely test for PI and make the
+necessary changes inside the existing calls rather than creating new
+calls for the PI cases.  Similar changes are needed for
+pthread_cond_timedwait() and pthread_cond_signal().
+
+Implementation
+--------------
+
+In order to ensure the rt_mutex has an owner if it has waiters, it
+is necessary for both the requeue code, as well as the waiting code,
+to be able to acquire the rt_mutex before returning to user space.
+The requeue code cannot simply wake the waiter and leave it to
+acquire the rt_mutex as it would open a race window between the
+requeue call returning to user space and the waiter waking and
+starting to run.  This is especially true in the uncontended case.
+
+The solution involves two new rt_mutex helper routines,
+rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which
+allow the requeue code to acquire an uncontended rt_mutex on behalf
+of the waiter and to enqueue the waiter on a contended rt_mutex.
+Two new system calls provide the kernel<->user interface to
+requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI.
+
+FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait()
+and pthread_cond_timedwait()) to block on the initial futex and wait
+to be requeued to a PI-aware futex.  The implementation is the
+result of a high-speed collision between futex_wait() and
+futex_lock_pi(), with some extra logic to check for the additional
+wake-up scenarios.
+
+FUTEX_REQUEUE_CMP_PI is called by the waker
+(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and
+possibly wake the waiting tasks. Internally, this system call is
+still handled by futex_requeue (by passing requeue_pi=1).  Before
+requeueing, futex_requeue() attempts to acquire the requeue target
+PI futex on behalf of the top waiter.  If it can, this waiter is
+woken.  futex_requeue() then proceeds to requeue the remaining
+nr_wake+nr_requeue tasks to the PI futex, calling
+rt_mutex_start_proxy_lock() prior to each requeue to prepare the
+task as a waiter on the underlying rt_mutex.  It is possible that
+the lock can be acquired at this stage as well, if so, the next
+waiter is woken to finish the acquisition of the lock.
+
+FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
+their sum is all that really matters.  futex_requeue() will wake or
+requeue up to nr_wake + nr_requeue tasks.  It will wake only as many
+tasks as it can acquire the lock for, which in the majority of cases
+should be 0 as good programming practice dictates that the caller of
+either pthread_cond_broadcast() or pthread_cond_signal() acquire the
+mutex prior to making the call. FUTEX_REQUEUE_PI requires that
+nr_wake=1.  nr_requeue should be INT_MAX for broadcast and 0 for
+signal.

Documentation/kernel-parameters.txt

@@ -56,7 +56,6 @@ parameter is applicable:
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
-	KMEMTRACE kmemtrace is enabled.
 	LIBATA  Libata driver is enabled
 	LP	Printer support is enabled.
 	LOOP	Loopback device support is enabled.
@@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file
 				    flushed before they will be reused, which
 				    is a lot of faster
 
-	amd_iommu_size= [HW,X86-64]
-			Define the size of the aperture for the AMD IOMMU
-			driver. Possible values are:
-			'32M', '64M' (default), '128M', '256M', '512M', '1G'
-
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
@@ -646,6 +640,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			DMA-API debugging code disables itself because the
 			architectural default is too low.
 
+	dma_debug_driver=<driver_name>
+			With this option the DMA-API debugging driver
+			filter feature can be enabled at boot time. Just
+			pass the driver to filter for as the parameter.
+			The filter can be disabled or changed to another
+			driver later using sysfs.
+
 	dscc4.setup=	[NET]
 
 	dtc3181e=	[HW,SCSI]
@@ -752,12 +753,25 @@ and is between 256 and 4096 characters. It is defined in the file
 			ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
 
 	ftrace=[tracer]
-			[ftrace] will set and start the specified tracer
+			[FTRACE] will set and start the specified tracer
 			as early as possible in order to facilitate early
 			boot debugging.
 
 	ftrace_dump_on_oops
-			[ftrace] will dump the trace buffers on oops.
+			[FTRACE] will dump the trace buffers on oops.
+
+	ftrace_filter=[function-list]
+			[FTRACE] Limit the functions traced by the function
+			tracer at boot up. function-list is a comma separated
+			list of functions. This list can be changed at run
+			time by the set_ftrace_filter file in the debugfs
+			tracing directory. 
+
+	ftrace_notrace=[function-list]
+			[FTRACE] Do not trace the functions specified in
+			function-list. This list can be changed at run time
+			by the set_ftrace_notrace file in the debugfs
+			tracing directory.
 
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
@@ -1054,15 +1068,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			use the HighMem zone if it exists, and the Normal
 			zone if it does not.
 
-	kmemtrace.enable=	[KNL,KMEMTRACE] Format: { yes | no }
-				Controls whether kmemtrace is enabled
-				at boot-time.
-
-	kmemtrace.subbufs=n	[KNL,KMEMTRACE] Overrides the number of
-			subbufs kmemtrace's relay channel has. Set this
-			higher than default (KMEMTRACE_N_SUBBUFS in code) if
-			you experience buffer overruns.
-
 	kgdboc=		[HW] kgdb over consoles.
 			Requires a tty driver that supports console polling.
 			(only serial suported for now)
@@ -1575,6 +1580,9 @@ and is between 256 and 4096 characters. It is defined in the file
 	noinitrd	[RAM] Tells the kernel not to load any configured
 			initial RAM disk.
 
+	nointremap	[X86-64, Intel-IOMMU] Do not enable interrupt
+			remapping.
+
 	nointroute	[IA-64]
 
 	nojitter	[IA64] Disables jitter checking for ITC timers.
@@ -1660,6 +1668,14 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.timer=	[HW]
 			Use timer interrupt instead of performance counters
 
+	oprofile.cpu_type=	Force an oprofile cpu type
+			This might be useful if you have an older oprofile
+			userland or if you want common events.
+			Format: { archperfmon }
+			archperfmon: [X86] Force use of architectural
+				perfmon on Intel CPUs instead of the
+				CPU specific event set.
+
 	osst=		[HW,SCSI] SCSI Tape Driver
 			Format: <buffer_size>,<write_threshold>
 			See also Documentation/scsi/st.txt.

Documentation/memory-barriers.txt

@@ -31,6 +31,7 @@ Contents:
 
      - Locking functions.
      - Interrupt disabling functions.
+     - Sleep and wake-up functions.
      - Miscellaneous functions.
 
  (*) Inter-CPU locking barrier effects.
@@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some
 other means.
 
 
+SLEEP AND WAKE-UP FUNCTIONS
+---------------------------
+
+Sleeping and waking on an event flagged in global data can be viewed as an
+interaction between two pieces of data: the task state of the task waiting for
+the event and the global data used to indicate the event.  To make sure that
+these appear to happen in the right order, the primitives to begin the process
+of going to sleep, and the primitives to initiate a wake up imply certain
+barriers.
+
+Firstly, the sleeper normally follows something like this sequence of events:
+
+	for (;;) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		if (event_indicated)
+			break;
+		schedule();
+	}
+
+A general memory barrier is interpolated automatically by set_current_state()
+after it has altered the task state:
+
+	CPU 1
+	===============================
+	set_current_state();
+	  set_mb();
+	    STORE current->state
+	    <general barrier>
+	LOAD event_indicated
+
+set_current_state() may be wrapped by:
+
+	prepare_to_wait();
+	prepare_to_wait_exclusive();
+
+which therefore also imply a general memory barrier after setting the state.
+The whole sequence above is available in various canned forms, all of which
+interpolate the memory barrier in the right place:
+
+	wait_event();
+	wait_event_interruptible();
+	wait_event_interruptible_exclusive();
+	wait_event_interruptible_timeout();
+	wait_event_killable();
+	wait_event_timeout();
+	wait_on_bit();
+	wait_on_bit_lock();
+
+
+Secondly, code that performs a wake up normally follows something like this:
+
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+or:
+
+	event_indicated = 1;
+	wake_up_process(event_daemon);
+
+A write memory barrier is implied by wake_up() and co. if and only if they wake
+something up.  The barrier occurs before the task state is cleared, and so sits
+between the STORE to indicate the event and the STORE to set TASK_RUNNING:
+
+	CPU 1				CPU 2
+	===============================	===============================
+	set_current_state();		STORE event_indicated
+	  set_mb();			wake_up();
+	    STORE current->state	  <write barrier>
+	    <general barrier>		  STORE current->state
+	LOAD event_indicated
+
+The available waker functions include:
+
+	complete();
+	wake_up();
+	wake_up_all();
+	wake_up_bit();
+	wake_up_interruptible();
+	wake_up_interruptible_all();
+	wake_up_interruptible_nr();
+	wake_up_interruptible_poll();
+	wake_up_interruptible_sync();
+	wake_up_interruptible_sync_poll();
+	wake_up_locked();
+	wake_up_locked_poll();
+	wake_up_nr();
+	wake_up_poll();
+	wake_up_process();
+
+
+[!] Note that the memory barriers implied by the sleeper and the waker do _not_
+order multiple stores before the wake-up with respect to loads of those stored
+values after the sleeper has called set_current_state().  For instance, if the
+sleeper does:
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	if (event_indicated)
+		break;
+	__set_current_state(TASK_RUNNING);
+	do_something(my_data);
+
+and the waker does:
+
+	my_data = value;
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+there's no guarantee that the change to event_indicated will be perceived by
+the sleeper as coming after the change to my_data.  In such a circumstance, the
+code on both sides must interpolate its own memory barriers between the
+separate data accesses.  Thus the above sleeper ought to do:
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	if (event_indicated) {
+		smp_rmb();
+		do_something(my_data);
+	}
+
+and the waker should do:
+
+	my_data = value;
+	smp_wmb();
+	event_indicated = 1;
+	wake_up(&event_wait_queue);
+
+
 MISCELLANEOUS FUNCTIONS
 -----------------------
 
@@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED?
 
 Under normal operation, memory operation reordering is generally not going to
 be a problem as a single-threaded linear piece of code will still appear to
-work correctly, even if it's in an SMP kernel.  There are, however, three
+work correctly, even if it's in an SMP kernel.  There are, however, four
 circumstances in which reordering definitely _could_ be a problem:
 
  (*) Interprocessor interaction.

Documentation/scheduler/sched-rt-group.txt

@@ -4,6 +4,7 @@
 CONTENTS
 ========
 
+0. WARNING
 1. Overview
   1.1 The problem
   1.2 The solution
@@ -14,6 +15,23 @@ CONTENTS
 3. Future plans
 
 
+0. WARNING
+==========
+
+ Fiddling with these settings can result in an unstable system, the knobs are
+ root only and assumes root knows what he is doing.
+
+Most notable:
+
+ * very small values in sched_rt_period_us can result in an unstable
+   system when the period is smaller than either the available hrtimer
+   resolution, or the time it takes to handle the budget refresh itself.
+
+ * very small values in sched_rt_runtime_us can result in an unstable
+   system when the runtime is so small the system has difficulty making
+   forward progress (NOTE: the migration thread and kstopmachine both
+   are real-time processes).
+
 1. Overview
 ===========
 
@@ -169,7 +187,7 @@ get their allocated time.
 
 Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
-the limited static priority levels 0-139. With deadline scheduling you need to
+the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
 deadline delta (deadline - now).
 

Documentation/trace/events.txt

@@ -0,0 +1,90 @@
+			     Event Tracing
+
+		Documentation written by Theodore Ts'o
+			Updated by Li Zefan
+
+1. Introduction
+===============
+
+Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+without creating custom kernel modules to register probe functions
+using the event tracing infrastructure.
+
+Not all tracepoints can be traced using the event tracing system;
+the kernel developer must provide code snippets which define how the
+tracing information is saved into the tracing buffer, and how the
+tracing information should be printed.
+
+2. Using Event Tracing
+======================
+
+2.1 Via the 'set_event' interface
+---------------------------------
+
+The events which are available for tracing can be found in the file
+/debug/tracing/available_events.
+
+To enable a particular event, such as 'sched_wakeup', simply echo it
+to /debug/tracing/set_event. For example:
+
+	# echo sched_wakeup >> /debug/tracing/set_event
+
+[ Note: '>>' is necessary, otherwise it will firstly disable
+  all the events. ]
+
+To disable an event, echo the event name to the set_event file prefixed
+with an exclamation point:
+
+	# echo '!sched_wakeup' >> /debug/tracing/set_event
+
+To disable all events, echo an empty line to the set_event file:
+
+	# echo > /debug/tracing/set_event
+
+To enable all events, echo '*:*' or '*:' to the set_event file:
+
+	# echo *:* > /debug/tracing/set_event
+
+The events are organized into subsystems, such as ext4, irq, sched,
+etc., and a full event name looks like this: <subsystem>:<event>.  The
+subsystem name is optional, but it is displayed in the available_events
+file.  All of the events in a subsystem can be specified via the syntax
+"<subsystem>:*"; for example, to enable all irq events, you can use the
+command:
+
+	# echo 'irq:*' > /debug/tracing/set_event
+
+2.2 Via the 'enable' toggle
+---------------------------
+
+The events available are also listed in /debug/tracing/events/ hierarchy
+of directories.
+
+To enable event 'sched_wakeup':
+
+	# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To disable it:
+
+	# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
+
+To enable all events in sched subsystem:
+
+	# echo 1 > /debug/tracing/events/sched/enable
+
+To eanble all events:
+
+	# echo 1 > /debug/tracing/events/enable
+
+When reading one of these enable files, there are four results:
+
+ 0 - all events this file affects are disabled
+ 1 - all events this file affects are enabled
+ X - there is a mixture of events enabled and disabled
+ ? - this file does not affect any event
+
+3. Defining an event-enabled tracepoint
+=======================================
+
+See The example provided in samples/trace_events
+

Documentation/trace/ftrace.txt

@@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured.
 
 	Function call tracer to trace all kernel functions.
 
-  "function_graph_tracer"
+  "function_graph"
 
 	Similar to the function tracer except that the
 	function tracer probes the functions on their entry
@@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice
 values starting at 100 (nice -20). Below is a quick chart to map
 the kernel priority to user land priorities.
 
-  Kernel priority: 0 to 99    ==> user RT priority 99 to 0
-  Kernel priority: 100 to 139 ==> user nice -20 to 19
-  Kernel priority: 140        ==> idle task priority
+   Kernel Space                     User Space
+ ===============================================================
+   0(high) to  98(low)     user RT priority 99(high) to 1(low)
+                           with SCHED_RR or SCHED_FIFO
+ ---------------------------------------------------------------
+  99                       sched_priority is not used in scheduling
+                           decisions(it must be specified as 0)
+ ---------------------------------------------------------------
+ 100(high) to 139(low)     user nice -20(high) to 19(low)
+ ---------------------------------------------------------------
+ 140                       idle task priority
+ ---------------------------------------------------------------
 
 The task states are:
 

Documentation/trace/power.txt

@@ -0,0 +1,17 @@
+The power tracer collects detailed information about C-state and P-state
+transitions, instead of just looking at the high-level "average"
+information.
+
+There is a helper script found in scrips/tracing/power.pl in the kernel
+sources which can be used to parse this information and create a
+Scalable Vector Graphics (SVG) picture from the trace data.
+
+To use this tracer:
+
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	echo power > /sys/kernel/debug/tracing/current_tracer
+	echo 1 > /sys/kernel/debug/tracing/tracing_enabled
+	sleep 1
+	echo 0 > /sys/kernel/debug/tracing/tracing_enabled
+	cat /sys/kernel/debug/tracing/trace | \
+		perl scripts/tracing/power.pl > out.sv

Documentation/x86/boot.txt

@@ -50,6 +50,10 @@ Protocol 2.08:	(Kernel 2.6.26) Added crc32 checksum and ELF format
 Protocol 2.09:	(Kernel 2.6.26) Added a field of 64-bit physical
 		pointer to single linked list of struct	setup_data.
 
+Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
+		beyond the kernel_alignment added, new init_size and
+		pref_address fields.  Added extended boot loader IDs.
+
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -168,12 +172,13 @@ Offset	Proto	Name		Meaning
 021C/4	2.00+	ramdisk_size	initrd size (set by boot loader)
 0220/4	2.00+	bootsect_kludge	DO NOT USE - for bootsect.S use only
 0224/2	2.01+	heap_end_ptr	Free memory after setup end
-0226/2	N/A	pad1		Unused
+0226/1	2.02+(3 ext_loader_ver	Extended boot loader version
+0227/1	2.02+(3	ext_loader_type	Extended boot loader ID
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
 022C/4	2.03+	ramdisk_max	Highest legal initrd address
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
-0235/1	N/A	pad2		Unused
+0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
 0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
@@ -182,6 +187,8 @@ Offset	Proto	Name		Meaning
 024C/4	2.08+	payload_length	Length of kernel payload
 0250/8	2.09+	setup_data	64-bit physical pointer to linked list
 				of struct setup_data
+0258/8	2.10+	pref_address	Preferred loading address
+0260/4	2.10+	init_size	Linear memory required during initialization
 
 (1) For backwards compatibility, if the setup_sects field contains 0, the
     real value is 4.
@@ -190,6 +197,8 @@ Offset	Proto	Name		Meaning
     field are unusable, which means the size of a bzImage kernel
     cannot be determined.
 
+(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+
 If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
 the boot protocol version is "old".  Loading an old kernel, the
 following parameters should be assumed:
@@ -343,18 +352,32 @@ Protocol:	2.00+
   0xTV here, where T is an identifier for the boot loader and V is
   a version number.  Otherwise, enter 0xFF here.
 
+  For boot loader IDs above T = 0xD, write T = 0xE to this field and
+  write the extended ID minus 0x10 to the ext_loader_type field.
+  Similarly, the ext_loader_ver field can be used to provide more than
+  four bits for the bootloader version.
+
+  For example, for T = 0x15, V = 0x234, write:
+
+  type_of_loader  <- 0xE4
+  ext_loader_type <- 0x05
+  ext_loader_ver  <- 0x23
+
   Assigned boot loader ids:
 	0  LILO			(0x00 reserved for pre-2.00 bootloader)
 	1  Loadlin
 	2  bootsect-loader	(0x20, all other values reserved)
-	3  SYSLINUX
-	4  EtherBoot
+	3  Syslinux
+	4  Etherboot/gPXE
 	5  ELILO
 	7  GRUB
-	8  U-BOOT
+	8  U-Boot
 	9  Xen
 	A  Gujin
 	B  Qemu
+	C  Arcturus Networks uCbootloader
+	E  Extended		(see ext_loader_type)
+	F  Special		(0xFF = undefined)
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.
@@ -453,6 +476,35 @@ Protocol:	2.01+
   Set this field to the offset (from the beginning of the real-mode
   code) of the end of the setup stack/heap, minus 0x0200.
 
+Field name:	ext_loader_ver
+Type:		write (optional)
+Offset/size:	0x226/1
+Protocol:	2.02+
+
+  This field is used as an extension of the version number in the
+  type_of_loader field.  The total version number is considered to be
+  (type_of_loader & 0x0f) + (ext_loader_ver << 4).
+
+  The use of this field is boot loader specific.  If not written, it
+  is zero.
+
+  Kernels prior to 2.6.31 did not recognize this field, but it is safe
+  to write for protocol version 2.02 or higher.
+
+Field name:	ext_loader_type
+Type:		write (obligatory if (type_of_loader & 0xf0) == 0xe0)
+Offset/size:	0x227/1
+Protocol:	2.02+
+
+  This field is used as an extension of the type number in
+  type_of_loader field.  If the type in type_of_loader is 0xE, then
+  the actual type is (ext_loader_type + 0x10).
+
+  This field is ignored if the type in type_of_loader is not 0xE.
+
+  Kernels prior to 2.6.31 did not recognize this field, but it is safe
+  to write for protocol version 2.02 or higher.
+
 Field name:	cmd_line_ptr
 Type:		write (obligatory)
 Offset/size:	0x228/4
@@ -482,11 +534,19 @@ Protocol:	2.03+
   0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
 
 Field name:	kernel_alignment
-Type:		read (reloc)
+Type:		read/modify (reloc)
 Offset/size:	0x230/4
-Protocol:	2.05+
+Protocol:	2.05+ (read), 2.10+ (modify)
+
+  Alignment unit required by the kernel (if relocatable_kernel is
+  true.)  A relocatable kernel that is loaded at an alignment
+  incompatible with the value in this field will be realigned during
+  kernel initialization.
 
-  Alignment unit required by the kernel (if relocatable_kernel is true.)
+  Starting with protocol version 2.10, this reflects the kernel
+  alignment preferred for optimal performance; it is possible for the
+  loader to modify this field to permit a lesser alignment.  See the
+  min_alignment and pref_address field below.
 
 Field name:	relocatable_kernel
 Type:		read (reloc)
@@ -498,6 +558,22 @@ Protocol:	2.05+
   After loading, the boot loader must set the code32_start field to
   point to the loaded code, or to a boot loader hook.
 
+Field name:	min_alignment
+Type:		read (reloc)
+Offset/size:	0x235/1
+Protocol:	2.10+
+
+  This field, if nonzero, indicates as a power of two the minimum
+  alignment required, as opposed to preferred, by the kernel to boot.
+  If a boot loader makes use of this field, it should update the
+  kernel_alignment field with the alignment unit desired; typically:
+
+	kernel_alignment = 1 << min_alignment
+
+  There may be a considerable performance cost with an excessively
+  misaligned kernel.  Therefore, a loader should typically try each
+  power-of-two alignment from kernel_alignment down to this alignment.
+
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4
@@ -582,6 +658,36 @@ Protocol:	2.09+
   sure to consider the case where the linked list already contains
   entries.
 
+Field name:	pref_address
+Type:		read (reloc)
+Offset/size:	0x258/8
+Protocol:	2.10+
+
+  This field, if nonzero, represents a preferred load address for the
+  kernel.  A relocating bootloader should attempt to load at this
+  address if possible.
+
+  A non-relocatable kernel will unconditionally move itself and to run
+  at this address.
+
+Field name:	init_size
+Type:		read
+Offset/size:	0x25c/4
+
+  This field indicates the amount of linear contiguous memory starting
+  at the kernel runtime start address that the kernel needs before it
+  is capable of examining its memory map.  This is not the same thing
+  as the total amount of memory the kernel needs to boot, but it can
+  be used by a relocating boot loader to help select a safe load
+  address for the kernel.
+
+  The kernel runtime start address is determined by the following algorithm:
+
+  if (relocatable_kernel)
+	runtime_start = align_up(load_address, kernel_alignment)
+  else
+	runtime_start = pref_address
+
 
 **** THE IMAGE CHECKSUM
 

Documentation/x86/x86_64/boot-options.txt

@@ -150,11 +150,6 @@ NUMA
 		Otherwise, the remaining system RAM is allocated to an
 		additional node.
 
-  numa=hotadd=percent
-		Only allow hotadd memory to preallocate page structures upto
-		percent of already available memory.
-		numa=hotadd=0 will disable hotadd memory.
-
 ACPI
 
   acpi=off	Don't enable ACPI

Documentation/x86/x86_64/mm.txt

@@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables:
 0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
 hole caused by [48:63] sign extension
 ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
-ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
-ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
-ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
+ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
+ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
+ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
+ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
+ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
 ... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
 ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -533,7 +533,7 @@ endif
 
 include $(srctree)/arch/$(SRCARCH)/Makefile
 
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
 KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
 endif
 

arch/alpha/kernel/sys_dp264.c

@@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 	}
 }
 
-static void
+static int
 dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&dp264_irq_lock);
 	cpu_set_irq_affinity(irq, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
+
+	return 0;
 }
 
-static void
+static int
 clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&dp264_irq_lock);
 	cpu_set_irq_affinity(irq - 16, *affinity);
 	tsunami_update_irq_hw(cached_irq_mask);
 	spin_unlock(&dp264_irq_lock);
+
+	return 0;
 }
 
 static struct hw_interrupt_type dp264_irq_type = {

arch/alpha/kernel/sys_titan.c

@@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 
 }
 
-static void
+static int
 titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
 	spin_lock(&titan_irq_lock);
 	titan_cpu_set_irq_affinity(irq - 16, *affinity);
 	titan_update_irq_hw(titan_cached_irq_mask);
 	spin_unlock(&titan_irq_lock);
+
+	return 0;
 }
 
 static void

arch/arm/common/gic.c

@@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
+static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
 	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
@@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 	val |= 1 << (cpu + shift);
 	writel(val, reg);
 	spin_unlock(&irq_controller_lock);
+
+	return 0;
 }
 #endif
 

arch/arm/include/asm/cache.h

@@ -7,4 +7,20 @@
 #define L1_CACHE_SHIFT		5
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
 #endif

arch/arm/include/asm/page.h

@@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
 	(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
 	 VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
 
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
 #include <asm-generic/page.h>
 
 #endif

arch/arm/mach-mx2/clock_imx21.c

@@ -890,7 +890,7 @@ static struct clk clko_clk = {
 		.con_id = n, \
 		.clk = &c, \
 	},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 /* It's unlikely that any driver wants one of them directly:
 	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
 	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)

arch/arm/mach-mx2/clock_imx27.c

@@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)

arch/arm/mach-mx3/clock-imx35.c

@@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 		.clk = &c,		\
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)

arch/arm/mach-mx3/clock.c

@@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk,     0, NULL,          0, ipg_get_rate, NULL, &ahb_clk);
 		.clk = &c, \
 	},
 
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "emi", emi_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
 	_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)

arch/arm/mach-pxa/devices.c

@@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 }
 
 
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+	.gpio_pullup = -1,
+	.gpio_vbus   = -1,
+};
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
 {

arch/arm/mach-pxa/imote2.c

@@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
  */
 static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
 	{ /* UCAM sensor board */
-		.type = "max1238",
+		.type = "max1239",
 		.addr = 0x35,
 	}, { /* ITS400 Sensor board only */
 		.type = "max1363",

arch/arm/mm/proc-v7.S

@@ -184,23 +184,37 @@ __v7_setup:
 	stmia	r12, {r0-r5, r7, r9, r11, lr}
 	bl	v7_flush_dcache_all
 	ldmia	r12, {r0-r5, r7, r9, r11, lr}
+
+	mrc	p15, 0, r0, c0, c0, 0		@ read main ID register
+	and	r10, r0, #0xff000000		@ ARM?
+	teq	r10, #0x41000000
+	bne	2f
+	and	r5, r0, #0x00f00000		@ variant
+	and	r6, r0, #0x0000000f		@ revision
+	orr	r0, r6, r5, lsr #20-4		@ combine variant and revision
+
 #ifdef CONFIG_ARM_ERRATA_430973
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 6)		@ set IBE to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r5, #0x00100000			@ only present in r1p*
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 6)		@ set IBE to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_458693
-	mrc	p15, 0, r10, c1, c0, 1		@ read aux control register
-	orr	r10, r10, #(1 << 5)		@ set L1NEON to 1
-	orr	r10, r10, #(1 << 9)		@ set PLDNOP to 1
-	mcr	p15, 0, r10, c1, c0, 1		@ write aux control register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 0, r10, c1, c0, 1		@ read aux control register
+	orreq	r10, r10, #(1 << 5)		@ set L1NEON to 1
+	orreq	r10, r10, #(1 << 9)		@ set PLDNOP to 1
+	mcreq	p15, 0, r10, c1, c0, 1		@ write aux control register
 #endif
 #ifdef CONFIG_ARM_ERRATA_460075
-	mrc	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
-	orr	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
-	mcr	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
+	teq	r0, #0x20			@ only present in r2p0
+	mrceq	p15, 1, r10, c9, c0, 2		@ read L2 cache aux ctrl register
+	tsteq	r10, #1 << 22
+	orreq	r10, r10, #(1 << 22)		@ set the Write Allocate disable bit
+	mcreq	p15, 1, r10, c9, c0, 2		@ write the L2 cache aux ctrl register
 #endif
-	mov	r10, #0
+
+2:	mov	r10, #0
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
 #endif

arch/cris/arch-v32/kernel/irq.c

@@ -325,12 +325,14 @@ static void end_crisv32_irq(unsigned int irq)
 {
 }
 
-void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
+int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&irq_lock, flags);
 	irq_allocations[irq - FIRST_IRQ].mask = *dest;
 	spin_unlock_irqrestore(&irq_lock, flags);
+
+	return 0;
 }
 
 static struct irq_chip crisv32_irq_type = {

arch/ia64/hp/sim/hpsim_irq.c

@@ -21,9 +21,10 @@ hpsim_irq_noop (unsigned int irq)
 {
 }
 
-static void
+static int
 hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
 {
+	return 0;
 }
 
 static struct hw_interrupt_type irq_type_hp_sim = {

arch/ia64/kernel/acpi.c

@@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void)
  * success: return IRQ number (>=0)
  * failure: return < 0
  */
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
 {
 	if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
 		return gsi;
@@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
 
 	fadt = (struct acpi_table_fadt *)fadt_header;
 
-	acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+	acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+				 ACPI_ACTIVE_LOW);
 	return 0;
 }
 

arch/ia64/kernel/iosapic.c

@@ -329,7 +329,7 @@ unmask_irq (unsigned int irq)
 }
 
 
-static void
+static int
 iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 #ifdef CONFIG_SMP
@@ -343,15 +343,15 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	cpu = cpumask_first_and(cpu_online_mask, mask);
 	if (cpu >= nr_cpu_ids)
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	dest = cpu_physical_id(cpu);
 
 	if (!iosapic_intr_info[irq].count)
-		return;			/* not an IOSAPIC interrupt */
+		return -1;			/* not an IOSAPIC interrupt */
 
 	set_irq_affinity_info(irq, dest, redir);
 
@@ -376,7 +376,9 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
 		iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
 		iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
 	}
+
 #endif
+	return 0;
 }
 
 /*

arch/ia64/kernel/msi_ia64.c

@@ -12,7 +12,7 @@
 static struct irq_chip	ia64_msi_chip;
 
 #ifdef CONFIG_SMP
-static void ia64_set_msi_irq_affinity(unsigned int irq,
+static int ia64_set_msi_irq_affinity(unsigned int irq,
 				      const cpumask_t *cpu_mask)
 {
 	struct msi_msg msg;
@@ -20,10 +20,10 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 	int cpu = first_cpu(*cpu_mask);
 
 	if (!cpu_online(cpu))
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	read_msi_msg(irq, &msg);
 
@@ -39,6 +39,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
 
 	write_msi_msg(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 
@@ -130,17 +132,17 @@ void arch_teardown_msi_irq(unsigned int irq)
 
 #ifdef CONFIG_DMAR
 #ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	struct irq_cfg *cfg = irq_cfg + irq;
 	struct msi_msg msg;
 	int cpu = cpumask_first(mask);
 
 	if (!cpu_online(cpu))
-		return;
+		return -1;
 
 	if (irq_prepare_move(irq, cpu))
-		return;
+		return -1;
 
 	dmar_msi_read(irq, &msg);
 
@@ -151,6 +153,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	dmar_msi_write(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, mask);
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 

arch/ia64/sn/kernel/irq.c

@@ -227,7 +227,7 @@ finish_up:
 	return new_irq_info;
 }
 
-static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
+static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
 {
 	struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
 	nasid_t nasid;
@@ -239,6 +239,8 @@ static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
 	list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
 				 sn_irq_lh[irq], list)
 		(void)sn_retarget_vector(sn_irq_info, nasid, slice);
+
+	return 0;
 }
 
 #ifdef CONFIG_SMP

arch/ia64/sn/kernel/msi_sn.c

@@ -151,7 +151,7 @@ int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
 }
 
 #ifdef CONFIG_SMP
-static void sn_set_msi_irq_affinity(unsigned int irq,
+static int sn_set_msi_irq_affinity(unsigned int irq,
 				    const struct cpumask *cpu_mask)
 {
 	struct msi_msg msg;
@@ -168,7 +168,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	cpu = cpumask_first(cpu_mask);
 	sn_irq_info = sn_msi_info[irq].sn_irq_info;
 	if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
-		return;
+		return -1;
 
 	/*
 	 * Release XIO resources for the old MSI PCI address
@@ -189,7 +189,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 	new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
 	sn_msi_info[irq].sn_irq_info = new_irq_info;
 	if (new_irq_info == NULL)
-		return;
+		return -1;
 
 	/*
 	 * Map the xio address into bus space
@@ -206,6 +206,8 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
 
 	write_msi_msg(irq, &msg);
 	cpumask_copy(irq_desc[irq].affinity, cpu_mask);
+
+	return 0;
 }
 #endif /* CONFIG_SMP */
 

arch/mips/Kconfig

@@ -72,6 +72,7 @@ config MIPS_COBALT
 	select IRQ_CPU
 	select IRQ_GT641XX
 	select PCI_GT64XXX_PCI0
+	select PCI
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -593,7 +594,7 @@ config WR_PPMC
 	  board, which is based on GT64120 bridge chip.
 
 config CAVIUM_OCTEON_SIMULATOR
-	bool "Support for the Cavium Networks Octeon Simulator"
+	bool "Cavium Networks Octeon Simulator"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT
@@ -607,7 +608,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	  hardware.
 
 config CAVIUM_OCTEON_REFERENCE_BOARD
-	bool "Support for the Cavium Networks Octeon reference board"
+	bool "Cavium Networks Octeon reference board"
 	select CEVT_R4K
 	select 64BIT_PHYS_ADDR
 	select DMA_COHERENT

arch/mips/cavium-octeon/octeon-irq.c

@@ -177,7 +177,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
 	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
@@ -199,6 +199,8 @@ static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
 	write_unlock(&octeon_irq_ciu0_rwlock);
+
+	return 0;
 }
 #endif
 
@@ -292,7 +294,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu;
 	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
@@ -315,6 +317,8 @@ static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask
 	 */
 	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
 	write_unlock(&octeon_irq_ciu1_rwlock);
+
+	return 0;
 }
 #endif
 

arch/mips/include/asm/cpu-info.h

@@ -39,8 +39,8 @@ struct cache_desc {
 #define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
 
 struct cpuinfo_mips {
-	unsigned long		udelay_val;
-	unsigned long		asid_cache;
+	unsigned int		udelay_val;
+	unsigned int		asid_cache;
 
 	/*
 	 * Capability and feature descriptor structure for MIPS CPU

arch/mips/include/asm/delay.h

@@ -11,94 +11,12 @@
 #ifndef _ASM_DELAY_H
 #define _ASM_DELAY_H
 
-#include <linux/param.h>
-#include <linux/smp.h>
+extern void __delay(unsigned int loops);
+extern void __ndelay(unsigned int ns);
+extern void __udelay(unsigned int us);
 
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
-	if (sizeof(long) == 4)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	subu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && !DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, 1					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops));
-	else if (sizeof(long) == 8 && DADDI_WAR)
-		__asm__ __volatile__ (
-		"	.set	noreorder				\n"
-		"	.align	3					\n"
-		"1:	bnez	%0, 1b					\n"
-		"	dsubu	%0, %2					\n"
-		"	.set	reorder					\n"
-		: "=r" (loops)
-		: "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec).  Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays.  This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
-	unsigned long hi, lo;
-
-	/*
-	 * The rates of 128 is rounded wrongly by the catchall case
-	 * for 64-bit.  Excessive precission?  Probably ...
-	 */
-#if defined(CONFIG_64BIT) && (HZ == 128)
-	usecs *= 0x0008637bd05af6c7UL;		/* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
-	usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
-	usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
-	                           0x80000000ULL) >> 32);
-#endif
-
-	if (sizeof(long) == 4)
-		__asm__("multu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && !R4000_WAR)
-		__asm__("dmultu\t%2, %3"
-		: "=h" (usecs), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-	else if (sizeof(long) == 8 && R4000_WAR)
-		__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
-		: "=r" (usecs), "=h" (hi), "=l" (lo)
-		: "r" (usecs), "r" (lpj)
-		: GCC_REG_ACCUM);
-
-	__delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
+#define ndelay(ns) __udelay(ns)
+#define udelay(us) __udelay(us)
 
 /* make sure "usecs *= ..." in udelay do not overflow. */
 #if HZ >= 1000

arch/mips/include/asm/ioctl.h

@@ -60,12 +60,16 @@
 	 ((nr)   << _IOC_NRSHIFT) | \
 	 ((size) << _IOC_SIZESHIFT))
 
+#ifdef __KERNEL__
 /* provoke compile error for invalid uses of size argument */
 extern unsigned int __invalid_size_argument_for_IOC;
 #define _IOC_TYPECHECK(t) \
 	((sizeof(t) == sizeof(t[1]) && \
 	  sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
 	  sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t)	(sizeof(t))
+#endif
 
 /* used to create numbers */
 #define _IO(type, nr)		_IOC(_IOC_NONE, (type), (nr), 0)

arch/mips/include/asm/irq.h

@@ -49,7 +49,7 @@ static inline void smtc_im_ack_irq(unsigned int irq)
 #ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
 #include <linux/cpumask.h>
 
-extern void plat_set_irq_affinity(unsigned int irq,
+extern int plat_set_irq_affinity(unsigned int irq,
 				  const struct cpumask *affinity);
 extern void smtc_forward_irq(unsigned int irq);
 

arch/mips/kernel/irq-gic.c

@@ -155,7 +155,7 @@ static void gic_unmask_irq(unsigned int irq)
 
 static DEFINE_SPINLOCK(gic_lock);
 
-static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 {
 	cpumask_t	tmp = CPU_MASK_NONE;
 	unsigned long	flags;
@@ -166,7 +166,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 
 	cpumask_and(&tmp, cpumask, cpu_online_mask);
 	if (cpus_empty(tmp))
-		return;
+		return -1;
 
 	/* Assumption : cpumask refers to a single CPU */
 	spin_lock_irqsave(&gic_lock, flags);
@@ -190,6 +190,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 	cpumask_copy(irq_desc[irq].affinity, cpumask);
 	spin_unlock_irqrestore(&gic_lock, flags);
 
+	return 0;
 }
 #endif
 

arch/mips/kernel/proc.c

@@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, fmt, __cpu_name[n],
 	                           (version >> 4) & 0x0f, version & 0x0f,
 	                           (fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
-	seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
+	seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
 	              cpu_data[n].udelay_val / (500000/HZ),
 	              (cpu_data[n].udelay_val / (5000/HZ)) % 100);
 	seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");

arch/mips/lib/Makefile

@@ -2,8 +2,8 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
-	   strncpy_user.o strnlen_user.o uncached.o
+lib-y	+= csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
 
 obj-y			+= iomap.o
 obj-$(CONFIG_PCI)	+= iomap-pci.o

arch/mips/lib/delay.c

@@ -0,0 +1,56 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007  Maciej W. Rozycki
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+inline void __delay(unsigned int loops)
+{
+	__asm__ __volatile__ (
+	"	.set	noreorder				\n"
+	"	.align	3					\n"
+	"1:	bnez	%0, 1b					\n"
+	"	subu	%0, 1					\n"
+	"	.set	reorder					\n"
+	: "=r" (loops)
+	: "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+	unsigned int lpj = current_cpu_data.udelay_val;
+
+	__delay((us * 0x000010c7 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+	unsigned int lpj = current_cpu_data.udelay_val;
+
+	__delay((us * 0x00000005 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);

arch/mips/mti-malta/malta-smtc.c

@@ -114,7 +114,7 @@ struct plat_smp_ops msmtc_smp_ops = {
  */
 
 
-void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 {
 	cpumask_t tmask;
 	int cpu = 0;
@@ -156,5 +156,7 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 
 	/* Do any generic SMTC IRQ affinity setup */
 	smtc_set_irq_affinity(irq, tmask);
+
+	return 0;
 }
 #endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */

arch/mips/sibyte/bcm1480/irq.c

@@ -50,7 +50,7 @@ static void enable_bcm1480_irq(unsigned int irq);
 static void disable_bcm1480_irq(unsigned int irq);
 static void ack_bcm1480_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
 #endif
 
 #ifdef CONFIG_PCI
@@ -109,7 +109,7 @@ void bcm1480_unmask_irq(int cpu, int irq)
 }
 
 #ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on, k;
 	u64 cur_ints;
@@ -118,7 +118,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	if (cpumask_weight(mask) != 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
+		return -1;
 	}
 	i = cpumask_first(mask);
 
@@ -152,6 +152,8 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
 		}
 	}
 	spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+
+	return 0;
 }
 #endif
 

arch/mips/sibyte/cfe/setup.c

@@ -288,13 +288,7 @@ void __init prom_init(void)
 	 */
 	cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
 	if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
-		if (argc < 0) {
-			/*
-			 * It's OK for direct boot to not provide a
-			 *  command line
-			 */
-			strcpy(arcs_cmdline, "root=/dev/ram0 ");
-		} else {
+		if (argc >= 0) {
 			/* The loader should have set the command line */
 			/* too early for panic to do any good */
 			printk("LINUX_CMDLINE not defined in cfe.");

arch/mips/sibyte/sb1250/irq.c

@@ -50,7 +50,7 @@ static void enable_sb1250_irq(unsigned int irq);
 static void disable_sb1250_irq(unsigned int irq);
 static void ack_sb1250_irq(unsigned int irq);
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
 #endif
 
 #ifdef CONFIG_SIBYTE_HAS_LDT
@@ -103,7 +103,7 @@ void sb1250_unmask_irq(int cpu, int irq)
 }
 
 #ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 {
 	int i = 0, old_cpu, cpu, int_on;
 	u64 cur_ints;
@@ -113,7 +113,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 
 	if (cpumask_weight(mask) > 1) {
 		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return;
+		return -1;
 	}
 
 	/* Convert logical CPU to physical CPU */
@@ -143,6 +143,8 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
 					R_IMR_INTERRUPT_MASK));
 	}
 	spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+
+	return 0;
 }
 #endif
 

arch/parisc/kernel/irq.c

@@ -130,15 +130,17 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
 	return cpu_dest;
 }
 
-static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
+static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
 {
 	int cpu_dest;
 
 	cpu_dest = cpu_check_affinity(irq, dest);
 	if (cpu_dest < 0)
-		return;
+		return -1;
 
 	cpumask_copy(&irq_desc[irq].affinity, dest);
+
+	return 0;
 }
 #endif
 

arch/powerpc/platforms/pseries/xics.c

@@ -333,7 +333,7 @@ static void xics_eoi_lpar(unsigned int virq)
 	lpar_xirr_info_set((0xff << 24) | irq);
 }
 
-static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
+static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 {
 	unsigned int irq;
 	int status;
@@ -342,14 +342,14 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 
 	irq = (unsigned int)irq_map[virq].hwirq;
 	if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
-		return;
+		return -1;
 
 	status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
 
 	if (status) {
 		printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
 			__func__, irq, status);
-		return;
+		return -1;
 	}
 
 	/*
@@ -363,7 +363,7 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 		printk(KERN_WARNING
 			"%s: No online cpus in the mask %s for irq %d\n",
 			__func__, cpulist, virq);
-		return;
+		return -1;
 	}
 
 	status = rtas_call(ibm_set_xive, 3, 1, NULL,
@@ -372,8 +372,10 @@ static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
 	if (status) {
 		printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
 			__func__, irq, status);
-		return;
+		return -1;
 	}
+
+	return 0;
 }
 
 static struct irq_chip xics_pic_direct = {

arch/powerpc/sysdev/mpic.c

@@ -807,7 +807,7 @@ static void mpic_end_ipi(unsigned int irq)
 
 #endif /* CONFIG_SMP */
 
-void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 {
 	struct mpic *mpic = mpic_from_irq(irq);
 	unsigned int src = mpic_irq_to_hw(irq);
@@ -824,6 +824,8 @@ void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
 		mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
 			       mpic_physmask(cpus_addr(tmp)[0]));
 	}
+
+	return 0;
 }
 
 static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)

arch/powerpc/sysdev/mpic.h

@@ -36,6 +36,6 @@ static inline int mpic_pasemi_msi_init(struct mpic *mpic)
 
 extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
 extern void mpic_set_vector(unsigned int virq, unsigned int vector);
-extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
 
 #endif /* _POWERPC_SYSDEV_MPIC_H */

arch/sparc/include/asm/thread_info_64.h

@@ -102,8 +102,8 @@ struct thread_info {
 #define TI_KERN_CNTD1	0x00000488
 #define TI_PCR		0x00000490
 #define TI_RESTART_BLOCK 0x00000498
-#define TI_KUNA_REGS	0x000004c0
-#define TI_KUNA_INSN	0x000004c8
+#define TI_KUNA_REGS	0x000004c8
+#define TI_KUNA_INSN	0x000004d0
 #define TI_FPREGS	0x00000500
 
 /* We embed this in the uppermost byte of thread_info->flags */

arch/sparc/kernel/irq_64.c

@@ -318,10 +318,12 @@ static void sun4u_irq_enable(unsigned int virt_irq)
 	}
 }
 
-static void sun4u_set_affinity(unsigned int virt_irq,
+static int sun4u_set_affinity(unsigned int virt_irq,
 			       const struct cpumask *mask)
 {
 	sun4u_irq_enable(virt_irq);
+
+	return 0;
 }
 
 /* Don't do anything.  The desc->status check for IRQ_DISABLED in
@@ -377,7 +379,7 @@ static void sun4v_irq_enable(unsigned int virt_irq)
 		       ino, err);
 }
 
-static void sun4v_set_affinity(unsigned int virt_irq,
+static int sun4v_set_affinity(unsigned int virt_irq,
 			       const struct cpumask *mask)
 {
 	unsigned int ino = virt_irq_table[virt_irq].dev_ino;
@@ -388,6 +390,8 @@ static void sun4v_set_affinity(unsigned int virt_irq,
 	if (err != HV_EOK)
 		printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): "
 		       "err(%d)\n", ino, cpuid, err);
+
+	return 0;
 }
 
 static void sun4v_irq_disable(unsigned int virt_irq)
@@ -445,7 +449,7 @@ static void sun4v_virq_enable(unsigned int virt_irq)
 		       dev_handle, dev_ino, err);
 }
 
-static void sun4v_virt_set_affinity(unsigned int virt_irq,
+static int sun4v_virt_set_affinity(unsigned int virt_irq,
 				    const struct cpumask *mask)
 {
 	unsigned long cpuid, dev_handle, dev_ino;
@@ -461,6 +465,8 @@ static void sun4v_virt_set_affinity(unsigned int virt_irq,
 		printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): "
 		       "err(%d)\n",
 		       dev_handle, dev_ino, cpuid, err);
+
+	return 0;
 }
 
 static void sun4v_virq_disable(unsigned int virt_irq)

arch/x86/Kbuild

@@ -0,0 +1,16 @@
+
+obj-$(CONFIG_KVM) += kvm/
+
+# Xen paravirtualization support
+obj-$(CONFIG_XEN) += xen/
+
+# lguest paravirtualization support
+obj-$(CONFIG_LGUEST_GUEST) += lguest/
+
+obj-y += kernel/
+obj-y += mm/
+
+obj-y += crypto/
+obj-y += vdso/
+obj-$(CONFIG_IA32_EMULATION) += ia32/
+

arch/x86/Kconfig

@@ -47,6 +47,11 @@ config X86
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_LZMA
 
+config OUTPUT_FORMAT
+	string
+	default "elf32-i386" if X86_32
+	default "elf64-x86-64" if X86_64
+
 config ARCH_DEFCONFIG
 	string
 	default "arch/x86/configs/i386_defconfig" if X86_32
@@ -274,15 +279,9 @@ config SPARSE_IRQ
 
 	  If you don't know what to do here, say N.
 
-config NUMA_MIGRATE_IRQ_DESC
-	bool "Move irq desc when changing irq smp_affinity"
+config NUMA_IRQ_DESC
+	def_bool y
 	depends on SPARSE_IRQ && NUMA
-	depends on BROKEN
-	default n
-	---help---
-	  This enables moving irq_desc to cpu/node that irq will use handled.
-
-	  If you don't know what to do here, say N.
 
 config X86_MPPARSE
 	bool "Enable MPS table" if ACPI
@@ -355,7 +354,7 @@ config X86_UV
 	depends on X86_64
 	depends on X86_EXTENDED_PLATFORM
 	depends on NUMA
-	select X86_X2APIC
+	depends on X86_X2APIC
 	---help---
 	  This option is needed in order to support SGI Ultraviolet systems.
 	  If you don't have one of these, you should say N here.
@@ -1467,9 +1466,7 @@ config KEXEC_JUMP
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
-	default "0x1000000" if X86_NUMAQ
-	default "0x200000" if X86_64
-	default "0x100000"
+	default "0x1000000"
 	---help---
 	  This gives the physical address where the kernel is loaded.
 
@@ -1488,15 +1485,15 @@ config PHYSICAL_START
 	  to be specifically compiled to run from a specific memory area
 	  (normally a reserved region) and this option comes handy.
 
-	  So if you are using bzImage for capturing the crash dump, leave
-	  the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
-	  Otherwise if you plan to use vmlinux for capturing the crash dump
-	  change this value to start of the reserved region (Typically 16MB
-	  0x1000000). In other words, it can be set based on the "X" value as
-	  specified in the "crashkernel=YM@XM" command line boot parameter
-	  passed to the panic-ed kernel. Typically this parameter is set as
-	  crashkernel=64M@16M. Please take a look at
-	  Documentation/kdump/kdump.txt for more details about crash dumps.
+	  So if you are using bzImage for capturing the crash dump,
+	  leave the value here unchanged to 0x1000000 and set
+	  CONFIG_RELOCATABLE=y.  Otherwise if you plan to use vmlinux
+	  for capturing the crash dump change this value to start of
+	  the reserved region.  In other words, it can be set based on
+	  the "X" value as specified in the "crashkernel=YM@XM"
+	  command line boot parameter passed to the panic-ed
+	  kernel. Please take a look at Documentation/kdump/kdump.txt
+	  for more details about crash dumps.
 
 	  Usage of bzImage for capturing the crash dump is recommended as
 	  one does not have to build two kernels. Same kernel can be used
@@ -1509,8 +1506,8 @@ config PHYSICAL_START
 	  Don't change this unless you know what you are doing.
 
 config RELOCATABLE
-	bool "Build a relocatable kernel (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "Build a relocatable kernel"
+	default y
 	---help---
 	  This builds a kernel image that retains relocation information
 	  so it can be loaded someplace besides the default 1MB.
@@ -1525,12 +1522,16 @@ config RELOCATABLE
 	  it has been loaded at and the compile time physical address
 	  (CONFIG_PHYSICAL_START) is ignored.
 
+# Relocation on x86-32 needs some additional build support
+config X86_NEED_RELOCS
+	def_bool y
+	depends on X86_32 && RELOCATABLE
+
 config PHYSICAL_ALIGN
 	hex
 	prompt "Alignment value to which kernel should be aligned" if X86_32
-	default "0x100000" if X86_32
-	default "0x200000" if X86_64
-	range 0x2000 0x400000
+	default "0x1000000"
+	range 0x2000 0x1000000
 	---help---
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an

arch/x86/Kconfig.debug

@@ -159,14 +159,30 @@ config IOMMU_DEBUG
 	  options. See Documentation/x86_64/boot-options.txt for more
 	  details.
 
+config IOMMU_STRESS
+	bool "Enable IOMMU stress-test mode"
+	---help---
+	  This option disables various optimizations in IOMMU related
+	  code to do real stress testing of the IOMMU code. This option
+	  will cause a performance drop and should only be enabled for
+	  testing.
+
 config IOMMU_LEAK
 	bool "IOMMU leak tracing"
-	depends on DEBUG_KERNEL
-	depends on IOMMU_DEBUG
+	depends on IOMMU_DEBUG && DMA_API_DEBUG
 	---help---
 	  Add a simple leak tracer to the IOMMU code. This is useful when you
 	  are debugging a buggy device driver that leaks IOMMU mappings.
 
+config X86_DS_SELFTEST
+    bool "DS selftest"
+    default y
+    depends on DEBUG_KERNEL
+    depends on X86_DS
+	---help---
+	  Perform Debug Store selftests at boot time.
+	  If in doubt, say "N".
+
 config HAVE_MMIOTRACE_SUPPORT
 	def_bool y
 

arch/x86/Makefile

@@ -7,8 +7,6 @@ else
         KBUILD_DEFCONFIG := $(ARCH)_defconfig
 endif
 
-core-$(CONFIG_KVM) += arch/x86/kvm/
-
 # BITS is used as extension for files which are available in a 32 bit
 # and a 64 bit version to simplify shared Makefiles.
 # e.g.: obj-y += foo_$(BITS).o
@@ -118,21 +116,8 @@ head-y += arch/x86/kernel/init_task.o
 
 libs-y  += arch/x86/lib/
 
-# Sub architecture files that needs linking first
-core-y += $(fcore-y)
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-core-y += arch/x86/kernel/
-core-y += arch/x86/mm/
-
-core-y += arch/x86/crypto/
-core-y += arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+# See arch/x86/Kbuild for content of core part of the kernel
+core-y += arch/x86/
 
 # drivers-y are linked after core-y
 drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/

arch/x86/boot/.gitignore

@@ -3,6 +3,8 @@ bzImage
 cpustr.h
 mkcpustr
 offsets.h
+voffset.h
+zoffset.h
 setup
 setup.bin
 setup.elf

arch/x86/boot/Makefile

@@ -26,9 +26,10 @@ targets		:= vmlinux.bin setup.bin setup.elf bzImage
 targets		+= fdimage fdimage144 fdimage288 image.iso mtools.conf
 subdir-		:= compressed
 
-setup-y		+= a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y		+= a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o edd.o
 setup-y		+= header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y		+= printf.o string.o tty.o video.o video-mode.o version.o
+setup-y		+= printf.o regs.o string.o tty.o video.o video-mode.o
+setup-y		+= version.o
 setup-$(CONFIG_X86_APM_BOOT) += apm.o
 
 # The link order of the video-*.o modules can matter.  In particular,
@@ -86,19 +87,27 @@ $(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
 
 SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
 
-sed-offsets := -e 's/^00*/0/' \
-        -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
 
-quiet_cmd_offsets = OFFSETS $@
-      cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+      cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
 
-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+	$(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+      cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+	$(call if_changed,zoffset)
 
-targets += offsets.h
 
 AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
 
 LDFLAGS_setup.elf	:= -T
 $(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE

arch/x86/boot/a20.c

@@ -2,7 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007-2008 rPath, Inc. - All Rights Reserved
- *   Copyright 2009 Intel Corporation
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -90,8 +90,11 @@ static int a20_test_long(void)
 
 static void enable_a20_bios(void)
 {
-	asm volatile("pushfl; int $0x15; popfl"
-		     : : "a" ((u16)0x2401));
+	struct biosregs ireg;
+
+	initregs(&ireg);
+	ireg.ax = 0x2401;
+	intcall(0x15, &ireg, NULL);
 }
 
 static void enable_a20_kbc(void)

arch/x86/boot/apm.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   Original APM BIOS checking by Stephen Rothwell, May 1994
  *   (sfr@canb.auug.org.au)
@@ -19,75 +20,56 @@
 
 int query_apm_bios(void)
 {
-	u16 ax, bx, cx, dx, di;
-	u32 ebx, esi;
-	u8 err;
+	struct biosregs ireg, oreg;
 
 	/* APM BIOS installation check */
-	ax = 0x5300;
-	bx = cx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
-		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
-		     : : "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x53;
+	intcall(0x15, &ireg, &oreg);
 
-	if (err)
+	if (oreg.flags & X86_EFLAGS_CF)
 		return -1;		/* No APM BIOS */
 
-	if (bx != 0x504d)	/* "PM" signature */
+	if (oreg.bx != 0x504d)		/* "PM" signature */
 		return -1;
 
-	if (!(cx & 0x02))		/* 32 bits supported? */
+	if (!(oreg.cx & 0x02))		/* 32 bits supported? */
 		return -1;
 
 	/* Disconnect first, just in case */
-	ax = 0x5304;
-	bx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
-		     : "+a" (ax), "+b" (bx)
-		     : : "ecx", "edx", "esi", "edi");
-
-	/* Paranoia */
-	ebx = esi = 0;
-	cx = dx = di = 0;
+	ireg.al = 0x04;
+	intcall(0x15, &ireg, NULL);
 
 	/* 32-bit connect */
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6"
-		     : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx),
-		       "+S" (esi), "+D" (di), "=m" (err)
-		     : "a" (0x5303));
-
-	boot_params.apm_bios_info.cseg = ax;
-	boot_params.apm_bios_info.offset = ebx;
-	boot_params.apm_bios_info.cseg_16 = cx;
-	boot_params.apm_bios_info.dseg = dx;
-	boot_params.apm_bios_info.cseg_len = (u16)esi;
-	boot_params.apm_bios_info.cseg_16_len = esi >> 16;
-	boot_params.apm_bios_info.dseg_len = di;
-
-	if (err)
+	ireg.al = 0x03;
+	intcall(0x15, &ireg, &oreg);
+
+	boot_params.apm_bios_info.cseg        = oreg.ax;
+	boot_params.apm_bios_info.offset      = oreg.ebx;
+	boot_params.apm_bios_info.cseg_16     = oreg.cx;
+	boot_params.apm_bios_info.dseg        = oreg.dx;
+	boot_params.apm_bios_info.cseg_len    = oreg.si;
+	boot_params.apm_bios_info.cseg_16_len = oreg.hsi;
+	boot_params.apm_bios_info.dseg_len    = oreg.di;
+
+	if (oreg.flags & X86_EFLAGS_CF)
 		return -1;
 
 	/* Redo the installation check as the 32-bit connect;
 	   some BIOSes return different flags this way... */
 
-	ax = 0x5300;
-	bx = cx = 0;
-	asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
-		     : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
-		     : : "esi", "edi");
+	ireg.al = 0x00;
+	intcall(0x15, &ireg, &oreg);
 
-	if (err || bx != 0x504d) {
+	if ((oreg.eflags & X86_EFLAGS_CF) || oreg.bx != 0x504d) {
 		/* Failure with 32-bit connect, try to disconect and ignore */
-		ax = 0x5304;
-		bx = 0;
-		asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
-			     : "+a" (ax), "+b" (bx)
-			     : : "ecx", "edx", "esi", "edi");
+		ireg.al = 0x04;
+		intcall(0x15, &ireg, NULL);
 		return -1;
 	}
 
-	boot_params.apm_bios_info.version = ax;
-	boot_params.apm_bios_info.flags = cx;
+	boot_params.apm_bios_info.version = oreg.ax;
+	boot_params.apm_bios_info.flags   = oreg.cx;
 	return 0;
 }
 

arch/x86/boot/bioscall.S

@@ -0,0 +1,82 @@
+/* -----------------------------------------------------------------------
+ *
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * "Glove box" for BIOS calls.  Avoids the constant problems with BIOSes
+ * touching registers they shouldn't be.
+ */
+
+	.code16
+	.text
+	.globl	intcall
+	.type	intcall, @function
+intcall:
+	/* Self-modify the INT instruction.  Ugly, but works. */
+	cmpb	%al, 3f
+	je	1f
+	movb	%al, 3f
+	jmp	1f		/* Synchronize pipeline */
+1:
+	/* Save state */
+	pushfl
+	pushw	%fs
+	pushw	%gs
+	pushal
+
+	/* Copy input state to stack frame */
+	subw	$44, %sp
+	movw	%dx, %si
+	movw	%sp, %di
+	movw	$11, %cx
+	rep; movsd
+
+	/* Pop full state from the stack */
+	popal
+	popw	%gs
+	popw	%fs
+	popw	%es
+	popw	%ds
+	popfl
+
+	/* Actual INT */
+	.byte	0xcd		/* INT opcode */
+3:	.byte	0
+
+	/* Push full state to the stack */
+	pushfl
+	pushw	%ds
+	pushw	%es
+	pushw	%fs
+	pushw	%gs
+	pushal
+
+	/* Re-establish C environment invariants */
+	cld
+	movzwl	%sp, %esp
+	movw	%cs, %ax
+	movw	%ax, %ds
+	movw	%ax, %es
+
+	/* Copy output state from stack frame */
+	movw	68(%esp), %di	/* Original %cx == 3rd argument */
+	andw	%di, %di
+	jz	4f
+	movw	%sp, %si
+	movw	$11, %cx
+	rep; movsd
+4:	addw	$44, %sp
+
+	/* Restore state and return */
+	popal
+	popw	%gs
+	popw	%fs
+	popfl
+	retl
+	.size	intcall, .-intcall

arch/x86/boot/boot.h

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -26,6 +27,7 @@
 #include <asm/setup.h>
 #include "bitops.h"
 #include <asm/cpufeature.h>
+#include <asm/processor-flags.h>
 
 /* Useful macros */
 #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
@@ -241,6 +243,49 @@ int enable_a20(void);
 /* apm.c */
 int query_apm_bios(void);
 
+/* bioscall.c */
+struct biosregs {
+	union {
+		struct {
+			u32 edi;
+			u32 esi;
+			u32 ebp;
+			u32 _esp;
+			u32 ebx;
+			u32 edx;
+			u32 ecx;
+			u32 eax;
+			u32 _fsgs;
+			u32 _dses;
+			u32 eflags;
+		};
+		struct {
+			u16 di, hdi;
+			u16 si, hsi;
+			u16 bp, hbp;
+			u16 _sp, _hsp;
+			u16 bx, hbx;
+			u16 dx, hdx;
+			u16 cx, hcx;
+			u16 ax, hax;
+			u16 gs, fs;
+			u16 es, ds;
+			u16 flags, hflags;
+		};
+		struct {
+			u8 dil, dih, edi2, edi3;
+			u8 sil, sih, esi2, esi3;
+			u8 bpl, bph, ebp2, ebp3;
+			u8 _spl, _sph, _esp2, _esp3;
+			u8 bl, bh, ebx2, ebx3;
+			u8 dl, dh, edx2, edx3;
+			u8 cl, ch, ecx2, ecx3;
+			u8 al, ah, eax2, eax3;
+		};
+	};
+};
+void intcall(u8 int_no, const struct biosregs *ireg, struct biosregs *oreg);
+
 /* cmdline.c */
 int cmdline_find_option(const char *option, char *buffer, int bufsize);
 int cmdline_find_option_bool(const char *option);
@@ -279,6 +324,9 @@ int sprintf(char *buf, const char *fmt, ...);
 int vsprintf(char *buf, const char *fmt, va_list args);
 int printf(const char *fmt, ...);
 
+/* regs.c */
+void initregs(struct biosregs *regs);
+
 /* string.c */
 int strcmp(const char *str1, const char *str2);
 size_t strnlen(const char *s, size_t maxlen);

arch/x86/boot/compressed/.gitignore

@@ -1,3 +1,6 @@
 relocs
 vmlinux.bin.all
 vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S

arch/x86/boot/compressed/Makefile

@@ -19,7 +19,9 @@ KBUILD_AFLAGS  := $(KBUILD_CFLAGS) -D__ASSEMBLY__
 LDFLAGS := -m elf_$(UTS_MACHINE)
 LDFLAGS_vmlinux := -T
 
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y	:= mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
 	$(call if_changed,ld)
 	@:
 
@@ -29,7 +31,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 
 
 targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
 
 quiet_cmd_relocs = RELOCS  $@
       cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
@@ -37,46 +39,22 @@ $(obj)/vmlinux.relocs: vmlinux $(obj)/relocs FORCE
 	$(call if_changed,relocs)
 
 vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD   $@
-      cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
-	$(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
 
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
-	$(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
 
-else
+suffix-$(CONFIG_KERNEL_GZIP)	:= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	:= lzma
 
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+      cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
 
-suffix_$(CONFIG_KERNEL_GZIP)  = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA)  = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
-	$(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+	$(call if_changed,mkpiggy)

arch/x86/boot/compressed/head_32.S

@@ -12,16 +12,16 @@
  * the page directory. [According to comments etc elsewhere on a compressed
  * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
  *
- * Page 0 is deliberately kept safe, since System Management Mode code in 
+ * Page 0 is deliberately kept safe, since System Management Mode code in
  * laptops may need to access the BIOS data stored there.  This is also
- * useful for future device drivers that either access the BIOS via VM86 
+ * useful for future device drivers that either access the BIOS via VM86
  * mode.
  */
 
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.text
+	.text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -29,161 +29,151 @@
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head","ax",@progbits
+	.section ".text.head","ax",@progbits
 ENTRY(startup_32)
 	cld
-	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-	 * us to not reload segments */
-	testb $(1<<6), BP_loadflags(%esi)
-	jnz 1f
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
+	testb	$(1<<6), BP_loadflags(%esi)
+	jnz	1f
 
 	cli
-	movl $(__BOOT_DS),%eax
-	movl %eax,%ds
-	movl %eax,%es
-	movl %eax,%fs
-	movl %eax,%gs
-	movl %eax,%ss
+	movl	$__BOOT_DS, %eax
+	movl	%eax, %ds
+	movl	%eax, %es
+	movl	%eax, %fs
+	movl	%eax, %gs
+	movl	%eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-	leal (0x1e4+4)(%esi), %esp
-	call 1f
-1:	popl %ebp
-	subl $1b, %ebp
+	leal	(BP_scratch+4)(%esi), %esp
+	call	1f
+1:	popl	%ebp
+	subl	$1b, %ebp
 
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
-	movl 	%ebp, %ebx
-	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
-	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+	movl	%ebp, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl    %eax, %ebx
+	notl	%eax
+	andl    %eax, %ebx
 #else
-	movl $LOAD_PHYSICAL_ADDR, %ebx
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	subl input_len(%ebp), %ebx
-	movl output_len(%ebp), %eax
-	addl %eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl $12, %eax
-	addl %eax, %ebx
-	/* Add 32K + 18 bytes of extra slack */
-	addl $(32768 + 18), %ebx
-	/* Align on a 4K boundary */
-	addl $4095, %ebx
-	andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
+
+	/* Set up the stack */
+	leal	boot_stack_end(%ebx), %esp
+
+	/* Zero EFLAGS */
+	pushl	$0
+	popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	pushl %esi
-	leal _end(%ebp), %esi
-	leal _end(%ebx), %edi
-	movl $(_end - startup_32), %ecx
+	pushl	%esi
+	leal	(_bss-4)(%ebp), %esi
+	leal	(_bss-4)(%ebx), %edi
+	movl	$(_bss - startup_32), %ecx
+	shrl	$2, %ecx
 	std
-	rep
-	movsb
+	rep	movsl
 	cld
-	popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
-	addl    $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
-	andl    $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
-	movl	$LOAD_PHYSICAL_ADDR, %ebp
-#endif
+	popl	%esi
 
 /*
  * Jump to the relocated address.
  */
-	leal relocated(%ebx), %eax
-	jmp *%eax
+	leal	relocated(%ebx), %eax
+	jmp	*%eax
 ENDPROC(startup_32)
 
-.section ".text"
+	.text
 relocated:
 
 /*
- * Clear BSS
- */
-	xorl %eax,%eax
-	leal _edata(%ebx),%edi
-	leal _end(%ebx), %ecx
-	subl %edi,%ecx
-	cld
-	rep
-	stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
  */
-	leal boot_stack_end(%ebx), %esp
+	xorl	%eax, %eax
+	leal	_bss(%ebx), %edi
+	leal	_ebss(%ebx), %ecx
+	subl	%edi, %ecx
+	shrl	$2, %ecx
+	rep	stosl
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	movl output_len(%ebx), %eax
-	pushl %eax
-			# push arguments for decompress_kernel:
-	pushl %ebp	# output address
-	movl input_len(%ebx), %eax
-	pushl %eax	# input_len
-	leal input_data(%ebx), %eax
-	pushl %eax	# input_data
-	leal boot_heap(%ebx), %eax
-	pushl %eax	# heap area
-	pushl %esi	# real mode pointer
-	call decompress_kernel
-	addl $20, %esp
-	popl %ecx
+	leal	z_extract_offset_negative(%ebx), %ebp
+				/* push arguments for decompress_kernel: */
+	pushl	%ebp		/* output address */
+	pushl	$z_input_len	/* input_len */
+	leal	input_data(%ebx), %eax
+	pushl	%eax		/* input_data */
+	leal	boot_heap(%ebx), %eax
+	pushl	%eax		/* heap area */
+	pushl	%esi		/* real mode pointer */
+	call	decompress_kernel
+	addl	$20, %esp
 
 #if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
  */
-	movl %ebp, %edi
-	addl %ecx, %edi
+	leal	z_output_len(%ebp), %edi
 
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
  * and where it was actually loaded.
  */
-	movl %ebp, %ebx
-	subl $LOAD_PHYSICAL_ADDR, %ebx
-	jz   2f		/* Nothing to be done if loaded at compiled addr. */
+	movl	%ebp, %ebx
+	subl	$LOAD_PHYSICAL_ADDR, %ebx
+	jz	2f	/* Nothing to be done if loaded at compiled addr. */
 /*
  * Process relocations.
  */
 
-1:	subl $4, %edi
-	movl 0(%edi), %ecx
-	testl %ecx, %ecx
-	jz 2f
-	addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
-	jmp 1b
+1:	subl	$4, %edi
+	movl	(%edi), %ecx
+	testl	%ecx, %ecx
+	jz	2f
+	addl	%ebx, -__PAGE_OFFSET(%ebx, %ecx)
+	jmp	1b
 2:
 #endif
 
 /*
  * Jump to the decompressed kernel.
  */
-	xorl %ebx,%ebx
-	jmp *%ebp
+	xorl	%ebx, %ebx
+	jmp	*%ebp
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
 boot_heap:
 	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:

arch/x86/boot/compressed/head_64.S

@@ -21,8 +21,8 @@
 /*
  * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
  */
-.code32
-.text
+	.code32
+	.text
 
 #include <linux/linkage.h>
 #include <asm/segment.h>
@@ -33,12 +33,14 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-.section ".text.head"
+	.section ".text.head"
 	.code32
 ENTRY(startup_32)
 	cld
-	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
-	 * us to not reload segments */
+	/*
+	 * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+	 * us to not reload segments
+	 */
 	testb $(1<<6), BP_loadflags(%esi)
 	jnz 1f
 
@@ -49,14 +51,15 @@ ENTRY(startup_32)
 	movl	%eax, %ss
 1:
 
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
  * at and where we were actually loaded at.  This can only be done
  * with a short local call on x86.  Nothing  else will tell us what
  * address we are running at.  The reserved chunk of the real-mode
  * data at 0x1e4 (defined as a scratch field) are used as the stack
  * for this calculation. Only 4 bytes are needed.
  */
-	leal	(0x1e4+4)(%esi), %esp
+	leal	(BP_scratch+4)(%esi), %esp
 	call	1f
 1:	popl	%ebp
 	subl	$1b, %ebp
@@ -70,32 +73,28 @@ ENTRY(startup_32)
 	testl	%eax, %eax
 	jnz	no_longmode
 
-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
  * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
  * contains the address where we should move the kernel image temporarily
  * for safe in-place decompression.
  */
 
 #ifdef CONFIG_RELOCATABLE
 	movl	%ebp, %ebx
-	addl	$(PMD_PAGE_SIZE -1), %ebx
-	andl	$PMD_PAGE_MASK, %ebx
+	movl	BP_kernel_alignment(%esi), %eax
+	decl	%eax
+	addl	%eax, %ebx
+	notl	%eax
+	andl	%eax, %ebx
 #else
-	movl	$CONFIG_PHYSICAL_START, %ebx
+	movl	$LOAD_PHYSICAL_ADDR, %ebx
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	subl	input_len(%ebp), %ebx
-	movl	output_len(%ebp), %eax
-	addl	%eax, %ebx
-	/* Add 8 bytes for every 32K input block */
-	shrl	$12, %eax
-	addl	%eax, %ebx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addl	$(32768 + 18 + 4095), %ebx
-	andl	$~4095, %ebx
+	/* Target address to relocate to for decompression */
+	addl	$z_extract_offset, %ebx
 
 /*
  * Prepare for entering 64 bit mode
@@ -114,7 +113,7 @@ ENTRY(startup_32)
  /*
   * Build early 4G boot pagetable
   */
-	/* Initialize Page tables to 0*/
+	/* Initialize Page tables to 0 */
 	leal	pgtable(%ebx), %edi
 	xorl	%eax, %eax
 	movl	$((4096*6)/4), %ecx
@@ -155,7 +154,8 @@ ENTRY(startup_32)
 	btsl	$_EFER_LME, %eax
 	wrmsr
 
-	/* Setup for the jump to 64bit mode
+	/*
+	 * Setup for the jump to 64bit mode
 	 *
 	 * When the jump is performend we will be in long mode but
 	 * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
@@ -184,7 +184,8 @@ no_longmode:
 
 #include "../../kernel/verify_cpu_64.S"
 
-	/* Be careful here startup_64 needs to be at a predictable
+	/*
+	 * Be careful here startup_64 needs to be at a predictable
 	 * address so I can export it in an ELF header.  Bootloaders
 	 * should look at the ELF header to find this address, as
 	 * it may change in the future.
@@ -192,7 +193,8 @@ no_longmode:
 	.code64
 	.org 0x200
 ENTRY(startup_64)
-	/* We come here either from startup_32 or directly from a
+	/*
+	 * We come here either from startup_32 or directly from a
 	 * 64bit bootloader.  If we come here from a bootloader we depend on
 	 * an identity mapped page table being provied that maps our
 	 * entire text+data+bss and hopefully all of memory.
@@ -209,50 +211,54 @@ ENTRY(startup_64)
 	movl    $0x20, %eax
 	ltr	%ax
 
-	/* Compute the decompressed kernel start address.  It is where
+	/*
+	 * Compute the decompressed kernel start address.  It is where
 	 * we were loaded at aligned to a 2M boundary. %rbp contains the
 	 * decompressed kernel start address.
 	 *
 	 * If it is a relocatable kernel then decompress and run the kernel
 	 * from load address aligned to 2MB addr, otherwise decompress and
-	 * run the kernel from CONFIG_PHYSICAL_START
+	 * run the kernel from LOAD_PHYSICAL_ADDR
+	 *
+	 * We cannot rely on the calculation done in 32-bit mode, since we
+	 * may have been invoked via the 64-bit entry point.
 	 */
 
 	/* Start with the delta to where the kernel will run at. */
 #ifdef CONFIG_RELOCATABLE
 	leaq	startup_32(%rip) /* - $startup_32 */, %rbp
-	addq	$(PMD_PAGE_SIZE - 1), %rbp
-	andq	$PMD_PAGE_MASK, %rbp
-	movq	%rbp, %rbx
+	movl	BP_kernel_alignment(%rsi), %eax
+	decl	%eax
+	addq	%rax, %rbp
+	notq	%rax
+	andq	%rax, %rbp
 #else
-	movq	$CONFIG_PHYSICAL_START, %rbp
-	movq	%rbp, %rbx
+	movq	$LOAD_PHYSICAL_ADDR, %rbp
 #endif
 
-	/* Replace the compressed data size with the uncompressed size */
-	movl	input_len(%rip), %eax
-	subq	%rax, %rbx
-	movl	output_len(%rip), %eax
-	addq	%rax, %rbx
-	/* Add 8 bytes for every 32K input block */
-	shrq	$12, %rax
-	addq	%rax, %rbx
-	/* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
-	addq	$(32768 + 18 + 4095), %rbx
-	andq	$~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+	/* Target address to relocate to for decompression */
+	leaq	z_extract_offset(%rbp), %rbx
+
+	/* Set up the stack */
+	leaq	boot_stack_end(%rbx), %rsp
+
+	/* Zero EFLAGS */
+	pushq	$0
+	popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
  * where decompression in place becomes safe.
  */
-	leaq	_end_before_pgt(%rip), %r8
-	leaq	_end_before_pgt(%rbx), %r9
-	movq	$_end_before_pgt /* - $startup_32 */, %rcx
-1:	subq	$8, %r8
-	subq	$8, %r9
-	movq	0(%r8), %rax
-	movq	%rax, 0(%r9)
-	subq	$8, %rcx
-	jnz	1b
+	pushq	%rsi
+	leaq	(_bss-8)(%rip), %rsi
+	leaq	(_bss-8)(%rbx), %rdi
+	movq	$_bss /* - $startup_32 */, %rcx
+	shrq	$3, %rcx
+	std
+	rep	movsq
+	cld
+	popq	%rsi
 
 /*
  * Jump to the relocated address.
@@ -260,37 +266,28 @@ ENTRY(startup_64)
 	leaq	relocated(%rbx), %rax
 	jmp	*%rax
 
-.section ".text"
+	.text
 relocated:
 
 /*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
  */
-	xorq	%rax, %rax
-	leaq    _edata(%rbx), %rdi
-	leaq    _end_before_pgt(%rbx), %rcx
+	xorl	%eax, %eax
+	leaq    _bss(%rip), %rdi
+	leaq    _ebss(%rip), %rcx
 	subq	%rdi, %rcx
-	cld
-	rep
-	stosb
-
-	/* Setup the stack */
-	leaq	boot_stack_end(%rip), %rsp
-
-	/* zero EFLAGS after setting rsp */
-	pushq	$0
-	popfq
+	shrq	$3, %rcx
+	rep	stosq
 
 /*
  * Do the decompression, and jump to the new kernel..
  */
-	pushq	%rsi			# Save the real mode argument
-	movq	%rsi, %rdi		# real mode address
-	leaq	boot_heap(%rip), %rsi	# malloc area for uncompression
-	leaq	input_data(%rip), %rdx  # input_data
-	movl	input_len(%rip), %eax
-	movq	%rax, %rcx		# input_len
-	movq	%rbp, %r8		# output
+	pushq	%rsi			/* Save the real mode argument */
+	movq	%rsi, %rdi		/* real mode address */
+	leaq	boot_heap(%rip), %rsi	/* malloc area for uncompression */
+	leaq	input_data(%rip), %rdx  /* input_data */
+	movl	$z_input_len, %ecx	/* input_len */
+	movq	%rbp, %r8		/* output target address */
 	call	decompress_kernel
 	popq	%rsi
 
@@ -311,11 +308,21 @@ gdt:
 	.quad   0x0000000000000000	/* TS continued */
 gdt_end:
 
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+	.bss
+	.balign 4
 boot_heap:
 	.fill BOOT_HEAP_SIZE, 1, 0
 boot_stack:
 	.fill BOOT_STACK_SIZE, 1, 0
 boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+	.section ".pgtable","a",@nobits
+	.balign 4096
+pgtable:
+	.fill 6*4096, 1, 0

arch/x86/boot/compressed/misc.c

@@ -325,20 +325,18 @@ asmlinkage void decompress_kernel(void *rmode, memptr heap,
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 
+	if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+		error("Destination address inappropriately aligned");
 #ifdef CONFIG_X86_64
-	if ((unsigned long)output & (__KERNEL_ALIGN - 1))
-		error("Destination address not 2M aligned");
-	if ((unsigned long)output >= 0xffffffffffUL)
+	if (heap > 0x3fffffffffffUL)
 		error("Destination address too large");
 #else
-	if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
-		error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
 	if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
 		error("Destination address too large");
+#endif
 #ifndef CONFIG_RELOCATABLE
-	if ((u32)output != LOAD_PHYSICAL_ADDR)
+	if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
 		error("Wrong destination address");
-#endif
 #endif
 
 	if (!quiet)

arch/x86/boot/compressed/mkpiggy.c

@@ -0,0 +1,97 @@
+/* ----------------------------------------------------------------------- *
+ *
+ *  Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License version
+ *  2 as published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *  02110-1301, USA.
+ *
+ *  H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+	const uint8_t *cp = p;
+
+	return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+		((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+	uint32_t olen;
+	long ilen;
+	unsigned long offs;
+	FILE *f;
+
+	if (argc < 2) {
+		fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+		return 1;
+	}
+
+	/* Get the information for the compressed kernel image first */
+
+	f = fopen(argv[1], "r");
+	if (!f) {
+		perror(argv[1]);
+		return 1;
+	}
+
+
+	if (fseek(f, -4L, SEEK_END)) {
+		perror(argv[1]);
+	}
+	fread(&olen, sizeof olen, 1, f);
+	ilen = ftell(f);
+	olen = getle32(&olen);
+	fclose(f);
+
+	/*
+	 * Now we have the input (compressed) and output (uncompressed)
+	 * sizes, compute the necessary decompression offset...
+	 */
+
+	offs = (olen > ilen) ? olen - ilen : 0;
+	offs += olen >> 12;	/* Add 8 bytes for each 32K block */
+	offs += 32*1024 + 18;	/* Add 32K + 18 bytes slack */
+	offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+	printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+	printf(".globl z_input_len\n");
+	printf("z_input_len = %lu\n", ilen);
+	printf(".globl z_output_len\n");
+	printf("z_output_len = %lu\n", (unsigned long)olen);
+	printf(".globl z_extract_offset\n");
+	printf("z_extract_offset = 0x%lx\n", offs);
+	/* z_extract_offset_negative allows simplification of head_32.S */
+	printf(".globl z_extract_offset_negative\n");
+	printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+	printf(".globl input_data, input_data_end\n");
+	printf("input_data:\n");
+	printf(".incbin \"%s\"\n", argv[1]);
+	printf("input_data_end:\n");
+
+	return 0;
+}

arch/x86/boot/compressed/vmlinux_64.lds → arch/x86/boot/compressed/vmlinux.lds.S

@@ -1,6 +1,17 @@
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
 OUTPUT_ARCH(i386:x86-64)
 ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
 SECTIONS
 {
 	/* Be careful parts of head_64.S assume startup_32 is at
@@ -33,16 +44,22 @@ SECTIONS
 		*(.data.*)
 		_edata = . ;
 	}
+	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
 	.bss : {
 		_bss = . ;
 		*(.bss)
 		*(.bss.*)
 		*(COMMON)
-		. = ALIGN(8);
-		_end_before_pgt = . ;
-		. = ALIGN(4096);
-		pgtable = . ;
-		. = . + 4096 * 6;
+		. = ALIGN(8);	/* For convenience during zeroing */
 		_ebss = .;
 	}
+#ifdef CONFIG_X86_64
+       . = ALIGN(PAGE_SIZE);
+       .pgtable : {
+		_pgtable = . ;
+		*(.pgtable)
+		_epgtable = . ;
+	}
+#endif
+	_end = .;
 }

arch/x86/boot/compressed/vmlinux.scr

@@ -1,10 +0,0 @@
-SECTIONS
-{
-  .rodata.compressed : {
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .;
-	*(.data)
-	output_len = . - 4;
-	input_data_end = .;
-	}
-}

arch/x86/boot/compressed/vmlinux_32.lds

@@ -1,43 +0,0 @@
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
-	/* Be careful parts of head_32.S assume startup_32 is at
-	 * address 0.
-	 */
-	. = 0;
-	.text.head : {
-		_head = . ;
-		*(.text.head)
-		_ehead = . ;
-	}
-	.rodata.compressed : {
-		*(.rodata.compressed)
-	}
-	.text :	{
-		_text = .; 	/* Text */
-		*(.text)
-		*(.text.*)
-		_etext = . ;
-	}
-	.rodata : {
-		_rodata = . ;
-		*(.rodata)	 /* read-only data */
-		*(.rodata.*)
-		_erodata = . ;
-	}
-	.data :	{
-		_data = . ;
-		*(.data)
-		*(.data.*)
-		_edata = . ;
-	}
-	.bss : {
-		_bss = . ;
-		*(.bss)
-		*(.bss.*)
-		*(COMMON)
-		_end = . ;
-	}
-}

arch/x86/boot/edd.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -22,17 +23,17 @@
  */
 static int read_mbr(u8 devno, void *buf)
 {
-	u16 ax, bx, cx, dx;
+	struct biosregs ireg, oreg;
 
-	ax = 0x0201;		/* Legacy Read, one sector */
-	cx = 0x0001;		/* Sector 0-0-1 */
-	dx = devno;
-	bx = (size_t)buf;
-	asm volatile("pushfl; stc; int $0x13; setc %%al; popfl"
-		     : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
-		     : : "esi", "edi", "memory");
+	initregs(&ireg);
+	ireg.ax = 0x0201;		/* Legacy Read, one sector */
+	ireg.cx = 0x0001;		/* Sector 0-0-1 */
+	ireg.dl = devno;
+	ireg.bx = (size_t)buf;
 
-	return -(u8)ax;		/* 0 or -1 */
+	intcall(0x13, &ireg, &oreg);
+
+	return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */
 }
 
 static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
@@ -72,56 +73,46 @@ static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
 
 static int get_edd_info(u8 devno, struct edd_info *ei)
 {
-	u16 ax, bx, cx, dx, di;
+	struct biosregs ireg, oreg;
 
 	memset(ei, 0, sizeof *ei);
 
 	/* Check Extensions Present */
 
-	ax = 0x4100;
-	bx = EDDMAGIC1;
-	dx = devno;
-	asm("pushfl; stc; int $0x13; setc %%al; popfl"
-	    : "+a" (ax), "+b" (bx), "=c" (cx), "+d" (dx)
-	    : : "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x41;
+	ireg.bx = EDDMAGIC1;
+	ireg.dl = devno;
+	intcall(0x13, &ireg, &oreg);
 
-	if ((u8)ax)
+	if (oreg.eflags & X86_EFLAGS_CF)
 		return -1;	/* No extended information */
 
-	if (bx != EDDMAGIC2)
+	if (oreg.bx != EDDMAGIC2)
 		return -1;
 
 	ei->device  = devno;
-	ei->version = ax >> 8;	/* EDD version number */
-	ei->interface_support = cx; /* EDD functionality subsets */
+	ei->version = oreg.ah;		 /* EDD version number */
+	ei->interface_support = oreg.cx; /* EDD functionality subsets */
 
 	/* Extended Get Device Parameters */
 
 	ei->params.length = sizeof(ei->params);
-	ax = 0x4800;
-	dx = devno;
-	asm("pushfl; int $0x13; popfl"
-	    : "+a" (ax), "+d" (dx), "=m" (ei->params)
-	    : "S" (&ei->params)
-	    : "ebx", "ecx", "edi");
+	ireg.ah = 0x48;
+	ireg.si = (size_t)&ei->params;
+	intcall(0x13, &ireg, &oreg);
 
 	/* Get legacy CHS parameters */
 
 	/* Ralf Brown recommends setting ES:DI to 0:0 */
-	ax = 0x0800;
-	dx = devno;
-	di = 0;
-	asm("pushw %%es; "
-	    "movw %%di,%%es; "
-	    "pushfl; stc; int $0x13; setc %%al; popfl; "
-	    "popw %%es"
-	    : "+a" (ax), "=b" (bx), "=c" (cx), "+d" (dx), "+D" (di)
-	    : : "esi");
-
-	if ((u8)ax == 0) {
-		ei->legacy_max_cylinder = (cx >> 8) + ((cx & 0xc0) << 2);
-		ei->legacy_max_head = dx >> 8;
-		ei->legacy_sectors_per_track = cx & 0x3f;
+	ireg.ah = 0x08;
+	ireg.es = 0;
+	intcall(0x13, &ireg, &oreg);
+
+	if (!(oreg.eflags & X86_EFLAGS_CF)) {
+		ei->legacy_max_cylinder = oreg.ch + ((oreg.cl & 0xc0) << 2);
+		ei->legacy_max_head = oreg.dh;
+		ei->legacy_sectors_per_track = oreg.cl & 0x3f;
 	}
 
 	return 0;

arch/x86/boot/header.S

@@ -22,7 +22,8 @@
 #include <asm/page_types.h>
 #include <asm/setup.h>
 #include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"
 
 BOOTSEG		= 0x07C0		/* original address of boot-sector */
 SYSSEG		= 0x1000		/* historical load address >> 4 */
@@ -115,7 +116,7 @@ _start:
 	# Part 2 of the header, from the old setup.S
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0209		# header version number (>= 0x0105)
+		.word	0x020a		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 		.globl realmode_swtch
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
@@ -168,7 +169,11 @@ heap_end_ptr:	.word	_end+STACK_SIZE-512
 					# end of setup code can be used by setup
 					# for local heap purposes.
 
-pad1:		.word	0
+ext_loader_ver:
+		.byte	0		# Extended boot loader version
+ext_loader_type:
+		.byte	0		# Extended boot loader type
+
 cmd_line_ptr:	.long	0		# (Header version 0x0202 or later)
 					# If nonzero, a 32-bit pointer
 					# to the kernel command line.
@@ -200,7 +205,7 @@ relocatable_kernel:    .byte 1
 #else
 relocatable_kernel:    .byte 0
 #endif
-pad2:			.byte 0
+min_alignment:		.byte MIN_KERNEL_ALIGN_LG2	# minimum alignment
 pad3:			.word 0
 
 cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
@@ -212,16 +217,27 @@ hardware_subarch:	.long 0			# subarchitecture, added with 2.07
 
 hardware_subarch_data:	.quad 0
 
-payload_offset:		.long input_data
-payload_length:		.long input_data_end-input_data
+payload_offset:		.long ZO_input_data
+payload_length:		.long ZO_z_input_len
 
 setup_data:		.quad 0			# 64-bit physical pointer to
 						# single linked list of
 						# struct setup_data
 
+pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr
+
+#define ZO_INIT_SIZE	(ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE	(VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size:		.long INIT_SIZE		# kernel initialization size
+
 # End of setup header #####################################################
 
-	.section ".inittext", "ax"
+	.section ".entrytext", "ax"
 start_of_setup:
 #ifdef SAFE_RESET_DISK_CONTROLLER
 # Reset the disk controller.

arch/x86/boot/main.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -61,11 +62,10 @@ static void copy_boot_params(void)
  */
 static void keyboard_set_repeat(void)
 {
-	u16 ax = 0x0305;
-	u16 bx = 0;
-	asm volatile("int $0x16"
-		     : "+a" (ax), "+b" (bx)
-		     : : "ecx", "edx", "esi", "edi");
+	struct biosregs ireg;
+	initregs(&ireg);
+	ireg.ax = 0x0305;
+	intcall(0x16, &ireg, NULL);
 }
 
 /*
@@ -73,18 +73,22 @@ static void keyboard_set_repeat(void)
  */
 static void query_ist(void)
 {
+	struct biosregs ireg, oreg;
+
 	/* Some older BIOSes apparently crash on this call, so filter
 	   it from machines too old to have SpeedStep at all. */
 	if (cpu.level < 6)
 		return;
 
-	asm("int $0x15"
-	    : "=a" (boot_params.ist_info.signature),
-	      "=b" (boot_params.ist_info.command),
-	      "=c" (boot_params.ist_info.event),
-	      "=d" (boot_params.ist_info.perf_level)
-	    : "a" (0x0000e980),	 /* IST Support */
-	      "d" (0x47534943)); /* Request value */
+	initregs(&ireg);
+	ireg.ax  = 0xe980;	 /* IST Support */
+	ireg.edx = 0x47534943;	 /* Request value */
+	intcall(0x15, &ireg, &oreg);
+
+	boot_params.ist_info.signature  = oreg.eax;
+	boot_params.ist_info.command    = oreg.ebx;
+	boot_params.ist_info.event      = oreg.ecx;
+	boot_params.ist_info.perf_level = oreg.edx;
 }
 
 /*
@@ -93,13 +97,12 @@ static void query_ist(void)
 static void set_bios_mode(void)
 {
 #ifdef CONFIG_X86_64
-	u32 eax, ebx;
+	struct biosregs ireg;
 
-	eax = 0xec00;
-	ebx = 2;
-	asm volatile("int $0x15"
-		     : "+a" (eax), "+b" (ebx)
-		     : : "ecx", "edx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ax = 0xec00;
+	ireg.bx = 2;
+	intcall(0x15, &ireg, NULL);
 #endif
 }
 

arch/x86/boot/mca.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -16,26 +17,22 @@
 
 int query_mca(void)
 {
-	u8 err;
-	u16 es, bx, len;
-
-	asm("pushw %%es ; "
-	    "int $0x15 ; "
-	    "setc %0 ; "
-	    "movw %%es, %1 ; "
-	    "popw %%es"
-	    : "=acd" (err), "=acdSD" (es), "=b" (bx)
-	    : "a" (0xc000));
-
-	if (err)
+	struct biosregs ireg, oreg;
+	u16 len;
+
+	initregs(&ireg);
+	ireg.ah = 0xc0;
+	intcall(0x15, &ireg, &oreg);
+
+	if (oreg.eflags & X86_EFLAGS_CF)
 		return -1;	/* No MCA present */
 
-	set_fs(es);
-	len = rdfs16(bx);
+	set_fs(oreg.es);
+	len = rdfs16(oreg.bx);
 
 	if (len > sizeof(boot_params.sys_desc_table))
 		len = sizeof(boot_params.sys_desc_table);
 
-	copy_from_fs(&boot_params.sys_desc_table, bx, len);
+	copy_from_fs(&boot_params.sys_desc_table, oreg.bx, len);
 	return 0;
 }

arch/x86/boot/memory.c

@@ -20,12 +20,16 @@
 static int detect_memory_e820(void)
 {
 	int count = 0;
-	u32 next = 0;
-	u32 size, id, edi;
-	u8 err;
+	struct biosregs ireg, oreg;
 	struct e820entry *desc = boot_params.e820_map;
 	static struct e820entry buf; /* static so it is zeroed */
 
+	initregs(&ireg);
+	ireg.ax  = 0xe820;
+	ireg.cx  = sizeof buf;
+	ireg.edx = SMAP;
+	ireg.di  = (size_t)&buf;
+
 	/*
 	 * Note: at least one BIOS is known which assumes that the
 	 * buffer pointed to by one e820 call is the same one as
@@ -41,22 +45,13 @@ static int detect_memory_e820(void)
 	 */
 
 	do {
-		size = sizeof buf;
-
-		/* Important: %edx and %esi are clobbered by some BIOSes,
-		   so they must be either used for the error output
-		   or explicitly marked clobbered.  Given that, assume there
-		   is something out there clobbering %ebp and %edi, too. */
-		asm("pushl %%ebp; int $0x15; popl %%ebp; setc %0"
-		    : "=d" (err), "+b" (next), "=a" (id), "+c" (size),
-		      "=D" (edi), "+m" (buf)
-		    : "D" (&buf), "d" (SMAP), "a" (0xe820)
-		    : "esi");
+		intcall(0x15, &ireg, &oreg);
+		ireg.ebx = oreg.ebx; /* for next iteration... */
 
 		/* BIOSes which terminate the chain with CF = 1 as opposed
 		   to %ebx = 0 don't always report the SMAP signature on
 		   the final, failing, probe. */
-		if (err)
+		if (oreg.eflags & X86_EFLAGS_CF)
 			break;
 
 		/* Some BIOSes stop returning SMAP in the middle of
@@ -64,60 +59,64 @@ static int detect_memory_e820(void)
 		   screwed up the map at that point, we might have a
 		   partial map, the full map, or complete garbage, so
 		   just return failure. */
-		if (id != SMAP) {
+		if (oreg.eax != SMAP) {
 			count = 0;
 			break;
 		}
 
 		*desc++ = buf;
 		count++;
-	} while (next && count < ARRAY_SIZE(boot_params.e820_map));
+	} while (ireg.ebx && count < ARRAY_SIZE(boot_params.e820_map));
 
 	return boot_params.e820_entries = count;
 }
 
 static int detect_memory_e801(void)
 {
-	u16 ax, bx, cx, dx;
-	u8 err;
+	struct biosregs ireg, oreg;
 
-	bx = cx = dx = 0;
-	ax = 0xe801;
-	asm("stc; int $0x15; setc %0"
-	    : "=m" (err), "+a" (ax), "+b" (bx), "+c" (cx), "+d" (dx));
+	initregs(&ireg);
+	ireg.ax = 0xe801;
+	intcall(0x15, &ireg, &oreg);
 
-	if (err)
+	if (oreg.eflags & X86_EFLAGS_CF)
 		return -1;
 
 	/* Do we really need to do this? */
-	if (cx || dx) {
-		ax = cx;
-		bx = dx;
+	if (oreg.cx || oreg.dx) {
+		oreg.ax = oreg.cx;
+		oreg.bx = oreg.dx;
 	}
 
-	if (ax > 15*1024)
+	if (oreg.ax > 15*1024) {
 		return -1;	/* Bogus! */
-
-	/* This ignores memory above 16MB if we have a memory hole
-	   there.  If someone actually finds a machine with a memory
-	   hole at 16MB and no support for 0E820h they should probably
-	   generate a fake e820 map. */
-	boot_params.alt_mem_k = (ax == 15*1024) ? (dx << 6)+ax : ax;
+	} else if (oreg.ax == 15*1024) {
+		boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax;
+	} else {
+		/*
+		 * This ignores memory above 16MB if we have a memory
+		 * hole there.  If someone actually finds a machine
+		 * with a memory hole at 16MB and no support for
+		 * 0E820h they should probably generate a fake e820
+		 * map.
+		 */
+		boot_params.alt_mem_k = oreg.ax;
+	}
 
 	return 0;
 }
 
 static int detect_memory_88(void)
 {
-	u16 ax;
-	u8 err;
+	struct biosregs ireg, oreg;
 
-	ax = 0x8800;
-	asm("stc; int $0x15; setc %0" : "=bcdm" (err), "+a" (ax));
+	initregs(&ireg);
+	ireg.ah = 0x88;
+	intcall(0x15, &ireg, &oreg);
 
-	boot_params.screen_info.ext_mem_k = ax;
+	boot_params.screen_info.ext_mem_k = oreg.ax;
 
-	return -err;
+	return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */
 }
 
 int detect_memory(void)

arch/x86/boot/regs.c

@@ -0,0 +1,29 @@
+/* -----------------------------------------------------------------------
+ *
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ *   This file is part of the Linux kernel, and is made available under
+ *   the terms of the GNU General Public License version 2 or (at your
+ *   option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Simple helper function for initializing a register set.
+ *
+ * Note that this sets EFLAGS_CF in the input register set; this
+ * makes it easier to catch functions which do nothing but don't
+ * explicitly set CF.
+ */
+
+#include "boot.h"
+
+void initregs(struct biosregs *reg)
+{
+	memset(reg, 0, sizeof *reg);
+	reg->eflags |= X86_EFLAGS_CF;
+	reg->ds = ds();
+	reg->es = ds();
+	reg->fs = fs();
+	reg->gs = gs();
+}

arch/x86/boot/setup.ld

@@ -15,8 +15,11 @@ SECTIONS
 
 	. = 497;
 	.header		: { *(.header) }
+	.entrytext	: { *(.entrytext) }
 	.inittext	: { *(.inittext) }
 	.initdata	: { *(.initdata) }
+	__end_init = .;
+
 	.text		: { *(.text) }
 	.text32		: { *(.text32) }
 
@@ -52,4 +55,7 @@ SECTIONS
 
 	. = ASSERT(_end <= 0x8000, "Setup too big!");
 	. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
+	/* Necessary for the very-old-loader check to work... */
+	. = ASSERT(__end_init <= 5*512, "init sections too big!");
+
 }

arch/x86/boot/tty.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -22,24 +23,23 @@
 
 void __attribute__((section(".inittext"))) putchar(int ch)
 {
-	unsigned char c = ch;
+	struct biosregs ireg;
 
-	if (c == '\n')
+	if (ch == '\n')
 		putchar('\r');	/* \n -> \r\n */
 
-	/* int $0x10 is known to have bugs involving touching registers
-	   it shouldn't.  Be extra conservative... */
-	asm volatile("pushal; pushw %%ds; int $0x10; popw %%ds; popal"
-		     : : "b" (0x0007), "c" (0x0001), "a" (0x0e00|ch));
+	initregs(&ireg);
+	ireg.bx = 0x0007;
+	ireg.cx = 0x0001;
+	ireg.ah = 0x0e;
+	ireg.al = ch;
+	intcall(0x10, &ireg, NULL);
 }
 
 void __attribute__((section(".inittext"))) puts(const char *str)
 {
-	int n = 0;
-	while (*str) {
+	while (*str)
 		putchar(*str++);
-		n++;
-	}
 }
 
 /*
@@ -49,14 +49,13 @@ void __attribute__((section(".inittext"))) puts(const char *str)
 
 static u8 gettime(void)
 {
-	u16 ax = 0x0200;
-	u16 cx, dx;
+	struct biosregs ireg, oreg;
 
-	asm volatile("int $0x1a"
-		     : "+a" (ax), "=c" (cx), "=d" (dx)
-		     : : "ebx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x02;
+	intcall(0x1a, &ireg, &oreg);
 
-	return dx >> 8;
+	return oreg.dh;
 }
 
 /*
@@ -64,19 +63,24 @@ static u8 gettime(void)
  */
 int getchar(void)
 {
-	u16 ax = 0;
-	asm volatile("int $0x16" : "+a" (ax));
+	struct biosregs ireg, oreg;
+
+	initregs(&ireg);
+	/* ireg.ah = 0x00; */
+	intcall(0x16, &ireg, &oreg);
 
-	return ax & 0xff;
+	return oreg.al;
 }
 
 static int kbd_pending(void)
 {
-	u8 pending;
-	asm volatile("int $0x16; setnz %0"
-		     : "=qm" (pending)
-		     : "a" (0x0100));
-	return pending;
+	struct biosregs ireg, oreg;
+
+	initregs(&ireg);
+	ireg.ah = 0x01;
+	intcall(0x16, &ireg, &oreg);
+
+	return !(oreg.eflags & X86_EFLAGS_ZF);
 }
 
 void kbd_flush(void)

arch/x86/boot/video-bios.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -29,21 +30,21 @@ static int bios_set_mode(struct mode_info *mi)
 
 static int set_bios_mode(u8 mode)
 {
-	u16 ax;
+	struct biosregs ireg, oreg;
 	u8 new_mode;
 
-	ax = mode;		/* AH=0x00 Set Video Mode */
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
+	initregs(&ireg);
+	ireg.al = mode;		/* AH=0x00 Set Video Mode */
+	intcall(0x10, &ireg, NULL);
 
-	ax = 0x0f00;		/* Get Current Video Mode */
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
+
+	ireg.ah = 0x0f;		/* Get Current Video Mode */
+	intcall(0x10, &ireg, &oreg);
 
 	do_restore = 1;		/* Assume video contents were lost */
-	new_mode = ax & 0x7f;	/* Not all BIOSes are clean with the top bit */
+
+	/* Not all BIOSes are clean with the top bit */
+	new_mode = ireg.al & 0x7f;
 
 	if (new_mode == mode)
 		return 0;	/* Mode change OK */
@@ -53,10 +54,8 @@ static int set_bios_mode(u8 mode)
 		/* Mode setting failed, but we didn't end up where we
 		   started.  That's bad.  Try to revert to the original
 		   video mode. */
-		ax = boot_params.screen_info.orig_video_mode;
-		asm volatile(INT10
-			     : "+a" (ax)
-			     : : "ebx", "ecx", "edx", "esi", "edi");
+		ireg.ax = boot_params.screen_info.orig_video_mode;
+		intcall(0x10, &ireg, NULL);
 	}
 #endif
 	return -1;

arch/x86/boot/video-vesa.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -31,7 +32,7 @@ static inline void vesa_store_mode_params_graphics(void) {}
 static int vesa_probe(void)
 {
 #if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
-	u16 ax, cx, di;
+	struct biosregs ireg, oreg;
 	u16 mode;
 	addr_t mode_ptr;
 	struct mode_info *mi;
@@ -39,13 +40,12 @@ static int vesa_probe(void)
 
 	video_vesa.modes = GET_HEAP(struct mode_info, 0);
 
-	ax = 0x4f00;
-	di = (size_t)&vginfo;
-	asm(INT10
-	    : "+a" (ax), "+D" (di), "=m" (vginfo)
-	    : : "ebx", "ecx", "edx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f00;
+	ireg.di = (size_t)&vginfo;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f ||
+	if (ireg.ax != 0x004f ||
 	    vginfo.signature != VESA_MAGIC ||
 	    vginfo.version < 0x0102)
 		return 0;	/* Not present */
@@ -65,14 +65,12 @@ static int vesa_probe(void)
 
 		memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
 
-		ax = 0x4f01;
-		cx = mode;
-		di = (size_t)&vminfo;
-		asm(INT10
-		    : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
-		    : : "ebx", "edx", "esi");
+		ireg.ax = 0x4f01;
+		ireg.cx = mode;
+		ireg.di = (size_t)&vminfo;
+		intcall(0x10, &ireg, &oreg);
 
-		if (ax != 0x004f)
+		if (ireg.ax != 0x004f)
 			continue;
 
 		if ((vminfo.mode_attr & 0x15) == 0x05) {
@@ -111,20 +109,19 @@ static int vesa_probe(void)
 
 static int vesa_set_mode(struct mode_info *mode)
 {
-	u16 ax, bx, cx, di;
+	struct biosregs ireg, oreg;
 	int is_graphic;
 	u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA;
 
 	memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
 
-	ax = 0x4f01;
-	cx = vesa_mode;
-	di = (size_t)&vminfo;
-	asm(INT10
-	    : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
-	    : : "ebx", "edx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f01;
+	ireg.cx = vesa_mode;
+	ireg.di = (size_t)&vminfo;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return -1;
 
 	if ((vminfo.mode_attr & 0x15) == 0x05) {
@@ -141,14 +138,12 @@ static int vesa_set_mode(struct mode_info *mode)
 	}
 
 
-	ax = 0x4f02;
-	bx = vesa_mode;
-	di = 0;
-	asm volatile(INT10
-		     : "+a" (ax), "+b" (bx), "+D" (di)
-		     : : "ecx", "edx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f02;
+	ireg.bx = vesa_mode;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return -1;
 
 	graphic_mode = is_graphic;
@@ -171,50 +166,45 @@ static int vesa_set_mode(struct mode_info *mode)
 /* Switch DAC to 8-bit mode */
 static void vesa_dac_set_8bits(void)
 {
+	struct biosregs ireg, oreg;
 	u8 dac_size = 6;
 
 	/* If possible, switch the DAC to 8-bit mode */
 	if (vginfo.capabilities & 1) {
-		u16 ax, bx;
-
-		ax = 0x4f08;
-		bx = 0x0800;
-		asm volatile(INT10
-			     : "+a" (ax), "+b" (bx)
-			     : : "ecx", "edx", "esi", "edi");
-
-		if (ax == 0x004f)
-			dac_size = bx >> 8;
+		initregs(&ireg);
+		ireg.ax = 0x4f08;
+		ireg.bh = 0x08;
+		intcall(0x10, &ireg, &oreg);
+		if (oreg.ax == 0x004f)
+			dac_size = oreg.bh;
 	}
 
 	/* Set the color sizes to the DAC size, and offsets to 0 */
-	boot_params.screen_info.red_size = dac_size;
+	boot_params.screen_info.red_size   = dac_size;
 	boot_params.screen_info.green_size = dac_size;
-	boot_params.screen_info.blue_size = dac_size;
-	boot_params.screen_info.rsvd_size = dac_size;
+	boot_params.screen_info.blue_size  = dac_size;
+	boot_params.screen_info.rsvd_size  = dac_size;
 
-	boot_params.screen_info.red_pos = 0;
-	boot_params.screen_info.green_pos = 0;
-	boot_params.screen_info.blue_pos = 0;
-	boot_params.screen_info.rsvd_pos = 0;
+	boot_params.screen_info.red_pos    = 0;
+	boot_params.screen_info.green_pos  = 0;
+	boot_params.screen_info.blue_pos   = 0;
+	boot_params.screen_info.rsvd_pos   = 0;
 }
 
 /* Save the VESA protected mode info */
 static void vesa_store_pm_info(void)
 {
-	u16 ax, bx, di, es;
+	struct biosregs ireg, oreg;
 
-	ax = 0x4f0a;
-	bx = di = 0;
-	asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es"
-	    : "=d" (es), "+a" (ax), "+b" (bx), "+D" (di)
-	    : : "ecx", "esi");
+	initregs(&ireg);
+	ireg.ax = 0x4f0a;
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return;
 
-	boot_params.screen_info.vesapm_seg = es;
-	boot_params.screen_info.vesapm_off = di;
+	boot_params.screen_info.vesapm_seg = oreg.es;
+	boot_params.screen_info.vesapm_off = oreg.di;
 }
 
 /*
@@ -252,7 +242,7 @@ static void vesa_store_mode_params_graphics(void)
 void vesa_store_edid(void)
 {
 #ifdef CONFIG_FIRMWARE_EDID
-	u16 ax, bx, cx, dx, di;
+	struct biosregs ireg, oreg;
 
 	/* Apparently used as a nonsense token... */
 	memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info);
@@ -260,33 +250,26 @@ void vesa_store_edid(void)
 	if (vginfo.version < 0x0200)
 		return;		/* EDID requires VBE 2.0+ */
 
-	ax = 0x4f15;		/* VBE DDC */
-	bx = 0x0000;		/* Report DDC capabilities */
-	cx = 0;			/* Controller 0 */
-	di = 0;			/* ES:DI must be 0 by spec */
-
-	/* Note: The VBE DDC spec is different from the main VESA spec;
-	   we genuinely have to assume all registers are destroyed here. */
-
-	asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
-	    : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di)
-	    : : "esi", "edx");
+	initregs(&ireg);
+	ireg.ax = 0x4f15;		/* VBE DDC */
+	/* ireg.bx = 0x0000; */		/* Report DDC capabilities */
+	/* ireg.cx = 0;	*/		/* Controller 0 */
+	ireg.es = 0;			/* ES:DI must be 0 by spec */
+	intcall(0x10, &ireg, &oreg);
 
-	if (ax != 0x004f)
+	if (oreg.ax != 0x004f)
 		return;		/* No EDID */
 
 	/* BH = time in seconds to transfer EDD information */
 	/* BL = DDC level supported */
 
-	ax = 0x4f15;		/* VBE DDC */
-	bx = 0x0001;		/* Read EDID */
-	cx = 0;			/* Controller 0 */
-	dx = 0;			/* EDID block number */
-	di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
-	asm(INT10
-	    : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info),
-	      "+c" (cx), "+D" (di)
-	    : : "esi");
+	ireg.ax = 0x4f15;		/* VBE DDC */
+	ireg.bx = 0x0001;		/* Read EDID */
+	/* ireg.cx = 0; */		/* Controller 0 */
+	/* ireg.dx = 0;	*/		/* EDID block number */
+	ireg.es = ds();
+	ireg.di =(size_t)&boot_params.edid_info; /* (ES:)Pointer to block */
+	intcall(0x10, &ireg, &oreg);
 #endif /* CONFIG_FIRMWARE_EDID */
 }
 

arch/x86/boot/video-vga.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -39,30 +40,30 @@ static __videocard video_vga;
 /* Set basic 80x25 mode */
 static u8 vga_set_basic_mode(void)
 {
+	struct biosregs ireg, oreg;
 	u16 ax;
 	u8 rows;
 	u8 mode;
 
+	initregs(&ireg);
+
 #ifdef CONFIG_VIDEO_400_HACK
 	if (adapter >= ADAPTER_VGA) {
-		asm volatile(INT10
-			     : : "a" (0x1202), "b" (0x0030)
-			     : "ecx", "edx", "esi", "edi");
+		ireg.ax = 0x1202;
+		ireg.bx = 0x0030;
+		intcall(0x10, &ireg, NULL);
 	}
 #endif
 
 	ax = 0x0f00;
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
-
-	mode = (u8)ax;
+	intcall(0x10, &ireg, &oreg);
+	mode = oreg.al;
 
 	set_fs(0);
 	rows = rdfs8(0x484);	/* rows minus one */
 
 #ifndef CONFIG_VIDEO_400_HACK
-	if ((ax == 0x5003 || ax == 0x5007) &&
+	if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
 	    (rows == 0 || rows == 24))
 		return mode;
 #endif
@@ -71,10 +72,8 @@ static u8 vga_set_basic_mode(void)
 		mode = 3;
 
 	/* Set the mode */
-	ax = mode;
-	asm volatile(INT10
-		     : "+a" (ax)
-		     : : "ebx", "ecx", "edx", "esi", "edi");
+	ireg.ax = mode;		/* AH=0: set mode */
+	intcall(0x10, &ireg, NULL);
 	do_restore = 1;
 	return mode;
 }
@@ -82,43 +81,69 @@ static u8 vga_set_basic_mode(void)
 static void vga_set_8font(void)
 {
 	/* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */
+	struct biosregs ireg;
+
+	initregs(&ireg);
 
 	/* Set 8x8 font */
-	asm volatile(INT10 : : "a" (0x1112), "b" (0));
+	ireg.ax = 0x1112;
+	/* ireg.bl = 0; */
+	intcall(0x10, &ireg, NULL);
 
 	/* Use alternate print screen */
-	asm volatile(INT10 : : "a" (0x1200), "b" (0x20));
+	ireg.ax = 0x1200;
+	ireg.bl = 0x20;
+	intcall(0x10, &ireg, NULL);
 
 	/* Turn off cursor emulation */
-	asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+	ireg.ax = 0x1201;
+	ireg.bl = 0x34;
+	intcall(0x10, &ireg, NULL);
 
 	/* Cursor is scan lines 6-7 */
-	asm volatile(INT10 : : "a" (0x0100), "c" (0x0607));
+	ireg.ax = 0x0100;
+	ireg.cx = 0x0607;
+	intcall(0x10, &ireg, NULL);
 }
 
 static void vga_set_14font(void)
 {
 	/* Set 9x14 font - 80x28 on VGA */
+	struct biosregs ireg;
+
+	initregs(&ireg);
 
 	/* Set 9x14 font */
-	asm volatile(INT10 : : "a" (0x1111), "b" (0));
+	ireg.ax = 0x1111;
+	/* ireg.bl = 0; */
+	intcall(0x10, &ireg, NULL);
 
 	/* Turn off cursor emulation */
-	asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+	ireg.ax = 0x1201;
+	ireg.bl = 0x34;
+	intcall(0x10, &ireg, NULL);
 
 	/* Cursor is scan lines 11-12 */
-	asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c));
+	ireg.ax = 0x0100;
+	ireg.cx = 0x0b0c;
+	intcall(0x10, &ireg, NULL);
 }
 
 static void vga_set_80x43(void)
 {
 	/* Set 80x43 mode on VGA (not EGA) */
+	struct biosregs ireg;
+
+	initregs(&ireg);
 
 	/* Set 350 scans */
-	asm volatile(INT10 : : "a" (0x1201), "b" (0x30));
+	ireg.ax = 0x1201;
+	ireg.bl = 0x30;
+	intcall(0x10, &ireg, NULL);
 
 	/* Reset video mode */
-	asm volatile(INT10 : : "a" (0x0003));
+	ireg.ax = 0x0003;
+	intcall(0x10, &ireg, NULL);
 
 	vga_set_8font();
 }
@@ -225,8 +250,6 @@ static int vga_set_mode(struct mode_info *mode)
  */
 static int vga_probe(void)
 {
-	u16 ega_bx;
-
 	static const char *card_name[] = {
 		"CGA/MDA/HGC", "EGA", "VGA"
 	};
@@ -240,26 +263,26 @@ static int vga_probe(void)
 		sizeof(ega_modes)/sizeof(struct mode_info),
 		sizeof(vga_modes)/sizeof(struct mode_info),
 	};
-	u8 vga_flag;
 
-	asm(INT10
-	    : "=b" (ega_bx)
-	    : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
-	    : "ecx", "edx", "esi", "edi");
+	struct biosregs ireg, oreg;
+
+	initregs(&ireg);
+
+	ireg.ax = 0x1200;
+	ireg.bl = 0x10;		/* Check EGA/VGA */
+	intcall(0x10, &ireg, &oreg);
 
 #ifndef _WAKEUP
-	boot_params.screen_info.orig_video_ega_bx = ega_bx;
+	boot_params.screen_info.orig_video_ega_bx = oreg.bx;
 #endif
 
 	/* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
-	if ((u8)ega_bx != 0x10) {
+	if (oreg.bl != 0x10) {
 		/* EGA/VGA */
-		asm(INT10
-		    : "=a" (vga_flag)
-		    : "a" (0x1a00)
-		    : "ebx", "ecx", "edx", "esi", "edi");
+		ireg.ax = 0x1a00;
+		intcall(0x10, &ireg, &oreg);
 
-		if (vga_flag == 0x1a) {
+		if (oreg.al == 0x1a) {
 			adapter = ADAPTER_VGA;
 #ifndef _WAKEUP
 			boot_params.screen_info.orig_video_isVGA = 1;

arch/x86/boot/video.c

@@ -2,6 +2,7 @@
  *
  *   Copyright (C) 1991, 1992 Linus Torvalds
  *   Copyright 2007 rPath, Inc. - All Rights Reserved
+ *   Copyright 2009 Intel Corporation; author H. Peter Anvin
  *
  *   This file is part of the Linux kernel, and is made available under
  *   the terms of the GNU General Public License version 2.
@@ -18,33 +19,29 @@
 
 static void store_cursor_position(void)
 {
-	u16 curpos;
-	u16 ax, bx;
+	struct biosregs ireg, oreg;
 
-	ax = 0x0300;
-	bx = 0;
-	asm(INT10
-	    : "=d" (curpos), "+a" (ax), "+b" (bx)
-	    : : "ecx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x03;
+	intcall(0x10, &ireg, &oreg);
 
-	boot_params.screen_info.orig_x = curpos;
-	boot_params.screen_info.orig_y = curpos >> 8;
+	boot_params.screen_info.orig_x = oreg.dl;
+	boot_params.screen_info.orig_y = oreg.dh;
 }
 
 static void store_video_mode(void)
 {
-	u16 ax, page;
+	struct biosregs ireg, oreg;
 
 	/* N.B.: the saving of the video page here is a bit silly,
 	   since we pretty much assume page 0 everywhere. */
-	ax = 0x0f00;
-	asm(INT10
-	    : "+a" (ax), "=b" (page)
-	    : : "ecx", "edx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x0f;
+	intcall(0x10, &ireg, &oreg);
 
 	/* Not all BIOSes are clean with respect to the top bit */
-	boot_params.screen_info.orig_video_mode = ax & 0x7f;
-	boot_params.screen_info.orig_video_page = page >> 8;
+	boot_params.screen_info.orig_video_mode = oreg.al & 0x7f;
+	boot_params.screen_info.orig_video_page = oreg.bh;
 }
 
 /*
@@ -257,7 +254,7 @@ static void restore_screen(void)
 	int y;
 	addr_t dst = 0;
 	u16 *src = saved.data;
-	u16 ax, bx, dx;
+	struct biosregs ireg;
 
 	if (graphic_mode)
 		return;		/* Can't restore onto a graphic mode */
@@ -296,12 +293,11 @@ static void restore_screen(void)
 	}
 
 	/* Restore cursor position */
-	ax = 0x0200;		/* Set cursor position */
-	bx = 0;			/* Page number (<< 8) */
-	dx = (saved.cury << 8)+saved.curx;
-	asm volatile(INT10
-		     : "+a" (ax), "+b" (bx), "+d" (dx)
-		     : : "ecx", "esi", "edi");
+	initregs(&ireg);
+	ireg.ah = 0x02;		/* Set cursor position */
+	ireg.dh = saved.cury;
+	ireg.dl = saved.curx;
+	intcall(0x10, &ireg, NULL);
 }
 #else
 #define save_screen()		((void)0)

arch/x86/boot/video.h

@@ -112,20 +112,6 @@ extern int force_x, force_y;	/* Don't query the BIOS for cols/rows */
 extern int do_restore;		/* Restore screen contents */
 extern int graphic_mode;	/* Graphics mode with linear frame buffer */
 
-/*
- * int $0x10 is notorious for touching registers it shouldn't.
- * gcc doesn't like %ebp being clobbered, so define it as a push/pop
- * sequence here.
- *
- * A number of systems, including the original PC can clobber %bp in
- * certain circumstances, like when scrolling.  There exists at least
- * one Trident video card which could clobber DS under a set of
- * circumstances that we are unlikely to encounter (scrolling when
- * using an extended graphics mode of more than 800x600 pixels), but
- * it's cheap insurance to deal with that here.
- */
-#define INT10 "pushl %%ebp; pushw %%ds; int $0x10; popw %%ds; popl %%ebp"
-
 /* Accessing VGA indexed registers */
 static inline u8 in_idx(u16 port, u8 index)
 {

arch/x86/configs/i386_defconfig

@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:50:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:21:55 2009
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -33,6 +34,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
 # CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -40,15 +42,16 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 # CONFIG_AUDIT_ARCH is not set
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_32_SMP=y
 CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
+CONFIG_X86_32_LAZY_GS=y
 CONFIG_KTIME_SCALAR=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -60,10 +63,17 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
@@ -113,23 +123,26 @@ CONFIG_PID_NS=y
 CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -139,6 +152,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -154,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -167,7 +183,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,12 +209,12 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_SPARSE_IRQ=y
-CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
 # CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_VSMP is not set
 # CONFIG_X86_RDC321X is not set
+# CONFIG_X86_32_NON_STANDARD is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
@@ -230,8 +245,10 @@ CONFIG_M686=y
 # CONFIG_GENERIC_CPU is not set
 CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=5
 CONFIG_X86_XADD=y
 # CONFIG_X86_PPRO_FENCE is not set
 CONFIG_X86_WP_WORKS_OK=y
@@ -247,7 +264,7 @@ CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_CPU_SUP_INTEL=y
 CONFIG_CPU_SUP_CYRIX_32=y
 CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_CENTAUR=y
 CONFIG_CPU_SUP_TRANSMETA_32=y
 CONFIG_CPU_SUP_UMC_32=y
 CONFIG_X86_DS=y
@@ -279,6 +296,7 @@ CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
 # CONFIG_NOHIGHMEM is not set
 CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
@@ -302,6 +320,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_HIGHPTE=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
@@ -312,6 +332,7 @@ CONFIG_MTRR=y
 CONFIG_X86_PAT=y
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
@@ -322,8 +343,9 @@ CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
 # CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_X86_NEED_RELOCS=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -363,7 +385,6 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
 # CONFIG_ACPI_SBS is not set
@@ -425,6 +446,7 @@ CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_DMAR is not set
 CONFIG_PCIEPORTBUS=y
 # CONFIG_HOTPLUG_PCI_PCIE is not set
 CONFIG_PCIEAER=y
@@ -435,6 +457,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
 CONFIG_ISA_DMA_API=y
 # CONFIG_ISA is not set
 # CONFIG_MCA is not set
@@ -481,7 +504,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -639,6 +661,7 @@ CONFIG_LLC=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -696,6 +719,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 CONFIG_HAMRADIO=y
 
 #
@@ -706,12 +730,10 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -789,6 +811,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -842,6 +865,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -940,6 +964,7 @@ CONFIG_DM_ZERO=y
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -977,6 +1002,8 @@ CONFIG_MII=y
 CONFIG_NET_VENDOR_3COM=y
 # CONFIG_VORTEX is not set
 # CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -1026,6 +1053,7 @@ CONFIG_E1000=y
 CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1040,6 +1068,7 @@ CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -1049,6 +1078,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -1058,6 +1088,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
 # CONFIG_IBMLS is not set
@@ -1073,8 +1104,8 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_PRISM54 is not set
@@ -1084,21 +1115,21 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1209,6 +1240,8 @@ CONFIG_INPUT_TABLET=y
 # CONFIG_TABLET_USB_KBTAB is not set
 # CONFIG_TABLET_USB_WACOM is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -1303,6 +1336,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 CONFIG_HW_RANDOM_INTEL=y
 CONFIG_HW_RANDOM_AMD=y
 CONFIG_HW_RANDOM_GEODE=y
@@ -1390,7 +1424,6 @@ CONFIG_I2C_I801=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1424,6 +1457,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_K8TEMP is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1433,6 +1467,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_CORETEMP is not set
@@ -1448,11 +1483,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1643,7 +1681,6 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
@@ -1652,6 +1689,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -1738,6 +1776,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1811,15 +1851,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1885,11 +1927,11 @@ CONFIG_USB_PRINTER=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1931,7 +1973,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1947,6 +1988,7 @@ CONFIG_USB_LIBUSUAL=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1958,8 +2000,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1969,6 +2013,10 @@ CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -2037,6 +2085,7 @@ CONFIG_DMADEVICES=y
 # DMA Devices
 #
 # CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 CONFIG_X86_PLATFORM_DEVICES=y
@@ -2071,6 +2120,7 @@ CONFIG_DMIID=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -2100,6 +2150,11 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -2151,6 +2206,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -2164,7 +2220,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2251,6 +2306,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -2266,6 +2322,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_DEBUG_BUGVERBOSE=y
@@ -2289,13 +2346,19 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -2305,13 +2368,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_POWER_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -2321,7 +2392,6 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
@@ -2329,7 +2399,7 @@ CONFIG_DEBUG_RODATA=y
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
 CONFIG_DOUBLEFAULT=y
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2365,6 +2435,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
 CONFIG_CRYPTO=y
 
 #
@@ -2380,10 +2452,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -2456,6 +2530,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2467,11 +2542,13 @@ CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_GEODE is not set
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
 CONFIG_VIRTUALIZATION=y
 # CONFIG_KVM is not set
 # CONFIG_LGUEST is not set
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -2489,7 +2566,10 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_AUDIT_GENERIC=y
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/x86/configs/x86_64_defconfig

@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:44:16 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:22:00 2009
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
 CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -34,6 +35,7 @@ CONFIG_ARCH_HAS_CPU_RELAX=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
 CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
 CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -41,14 +43,14 @@ CONFIG_ZONE_DMA32=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_X86_64_SMP=y
 CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 # CONFIG_KTIME_SCALAR is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -61,10 +63,17 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 CONFIG_TASKSTATS=y
@@ -114,23 +123,26 @@ CONFIG_PID_NS=y
 CONFIG_NET_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -140,6 +152,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -155,6 +168,8 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -167,7 +182,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
@@ -195,12 +209,10 @@ CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_SPARSE_IRQ=y
-# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
 CONFIG_X86_MPPARSE=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_UV is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
 # CONFIG_MEMTEST is not set
@@ -230,10 +242,10 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_MCORE2 is not set
 CONFIG_GENERIC_CPU=y
 CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_TSC=y
 CONFIG_X86_CMPXCHG64=y
@@ -242,7 +254,7 @@ CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_CPU_SUP_INTEL=y
 CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_CPU_SUP_CENTAUR=y
 CONFIG_X86_DS=y
 CONFIG_X86_PTRACE_BTS=y
 CONFIG_HPET_TIMER=y
@@ -269,6 +281,7 @@ CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_INTEL=y
 CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
 # CONFIG_I8K is not set
 CONFIG_MICROCODE=y
 CONFIG_MICROCODE_INTEL=y
@@ -276,6 +289,7 @@ CONFIG_MICROCODE_AMD=y
 CONFIG_MICROCODE_OLD_INTERFACE=y
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
 CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_DIRECT_GBPAGES=y
 CONFIG_NUMA=y
@@ -309,6 +323,8 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_X86_CHECK_BIOS_CORRUPTION=y
 CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
 CONFIG_X86_RESERVE_LOW_64K=y
@@ -317,6 +333,7 @@ CONFIG_MTRR=y
 CONFIG_X86_PAT=y
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
 # CONFIG_HZ_300 is not set
@@ -325,9 +342,10 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_COMPAT_VDSO is not set
 # CONFIG_CMDLINE_BOOL is not set
@@ -370,7 +388,6 @@ CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 # CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_ACPI_CONTAINER=y
 # CONFIG_ACPI_SBS is not set
@@ -436,6 +453,7 @@ CONFIG_PCI_MSI=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
 CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
 CONFIG_ISA_DMA_API=y
 CONFIG_K8_NB=y
 CONFIG_PCCARD=y
@@ -481,7 +499,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -639,6 +656,7 @@ CONFIG_LLC=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -696,6 +714,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 CONFIG_HAMRADIO=y
 
 #
@@ -706,12 +725,10 @@ CONFIG_HAMRADIO=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -788,9 +805,8 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_SGI_XP is not set
 # CONFIG_HP_ILO is not set
-# CONFIG_SGI_GRU is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -844,6 +860,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -940,6 +957,7 @@ CONFIG_DM_ZERO=y
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -977,6 +995,8 @@ CONFIG_MII=y
 CONFIG_NET_VENDOR_3COM=y
 # CONFIG_VORTEX is not set
 # CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 CONFIG_NET_TULIP=y
 # CONFIG_DE2104X is not set
 # CONFIG_TULIP is not set
@@ -1026,6 +1046,7 @@ CONFIG_E1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -1040,6 +1061,7 @@ CONFIG_TIGON3=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -1049,6 +1071,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -1058,6 +1081,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_BNX2X is not set
 # CONFIG_QLGE is not set
 # CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 CONFIG_TR=y
 # CONFIG_IBMOL is not set
 # CONFIG_3C359 is not set
@@ -1072,8 +1096,8 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
 # CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_PRISM54 is not set
@@ -1083,21 +1107,21 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1208,6 +1232,8 @@ CONFIG_INPUT_TABLET=y
 # CONFIG_TABLET_USB_KBTAB is not set
 # CONFIG_TABLET_USB_WACOM is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -1301,6 +1327,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_HW_RANDOM_INTEL is not set
 # CONFIG_HW_RANDOM_AMD is not set
 CONFIG_NVRAM=y
@@ -1382,7 +1409,6 @@ CONFIG_I2C_I801=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1416,6 +1442,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_K8TEMP is not set
 # CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -1425,6 +1452,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_FSCHER is not set
 # CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_CORETEMP is not set
@@ -1440,11 +1468,14 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
 # CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
@@ -1635,6 +1666,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
@@ -1720,6 +1752,8 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INDIGO is not set
 # CONFIG_SND_INDIGOIO is not set
 # CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1792,15 +1826,17 @@ CONFIG_USB_HIDDEV=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 CONFIG_LOGITECH_FF=y
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1866,11 +1902,11 @@ CONFIG_USB_PRINTER=y
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1912,7 +1948,6 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1928,6 +1963,7 @@ CONFIG_USB_LIBUSUAL=y
 #
 # OTG and related infrastructure
 #
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1939,8 +1975,10 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_ALIX2 is not set
 # CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1950,6 +1988,10 @@ CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_EDAC=y
@@ -2018,6 +2060,7 @@ CONFIG_DMADEVICES=y
 # DMA Devices
 #
 # CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 CONFIG_X86_PLATFORM_DEVICES=y
@@ -2051,6 +2094,7 @@ CONFIG_DMIID=y
 #
 # CONFIG_EXT2_FS is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
@@ -2081,6 +2125,11 @@ CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
 CONFIG_GENERIC_ACL=y
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -2132,6 +2181,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -2145,7 +2195,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -2232,6 +2281,7 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 # CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -2247,6 +2297,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -2269,13 +2320,19 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -2285,13 +2342,21 @@ CONFIG_HAVE_HW_BRANCH_TRACER=y
 # CONFIG_SYSPROF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_POWER_TRACER is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -2301,14 +2366,13 @@ CONFIG_EARLY_PRINTK=y
 CONFIG_EARLY_PRINTK_DBGP=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_IOMMU_DEBUG is not set
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2344,6 +2408,8 @@ CONFIG_SECURITY_SELINUX_AVC_STATS=y
 CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
 # CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
 CONFIG_CRYPTO=y
 
 #
@@ -2359,10 +2425,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
@@ -2414,6 +2482,7 @@ CONFIG_CRYPTO_SHA1=y
 #
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
 # CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -2435,6 +2504,7 @@ CONFIG_CRYPTO_DES=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2444,10 +2514,12 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
 CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
 CONFIG_VIRTUALIZATION=y
 # CONFIG_KVM is not set
 # CONFIG_VIRTIO_PCI is not set
 # CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -2464,7 +2536,10 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/x86/include/asm/alternative.h

@@ -3,6 +3,7 @@
 
 #include <linux/types.h>
 #include <linux/stddef.h>
+#include <linux/stringify.h>
 #include <asm/asm.h>
 
 /*
@@ -74,6 +75,22 @@ static inline void alternatives_smp_switch(int smp) {}
 
 const unsigned char *const *find_nop_table(void);
 
+/* alternative assembly primitive: */
+#define ALTERNATIVE(oldinstr, newinstr, feature)			\
+									\
+      "661:\n\t" oldinstr "\n662:\n"					\
+      ".section .altinstructions,\"a\"\n"				\
+      _ASM_ALIGN "\n"							\
+      _ASM_PTR "661b\n"				/* label           */	\
+      _ASM_PTR "663f\n"				/* new instruction */	\
+      "	 .byte " __stringify(feature) "\n"	/* feature bit     */	\
+      "	 .byte 662b-661b\n"			/* sourcelen       */	\
+      "	 .byte 664f-663f\n"			/* replacementlen  */	\
+      ".previous\n"							\
+      ".section .altinstr_replacement, \"ax\"\n"			\
+      "663:\n\t" newinstr "\n664:\n"		/* replacement     */	\
+      ".previous"
+
 /*
  * Alternative instructions for different CPU types or capabilities.
  *
@@ -87,18 +104,7 @@ const unsigned char *const *find_nop_table(void);
  * without volatile and memory clobber.
  */
 #define alternative(oldinstr, newinstr, feature)			\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature) : "memory")
+	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) : : : "memory")
 
 /*
  * Alternative inline assembly with input.
@@ -109,35 +115,16 @@ const unsigned char *const *find_nop_table(void);
  * Best is to use constraints that are fixed size (like (%1) ... "r")
  * If you use variable sized constraints like "m" or "g" in the
  * replacement make sure to pad to the worst case length.
+ * Leaving an unused argument 0 to keep API compatibility.
  */
 #define alternative_input(oldinstr, newinstr, feature, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature), ##input)
+	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature)		\
+		: : "i" (0), ## input)
 
 /* Like alternative_input, but with a single output argument */
 #define alternative_io(oldinstr, newinstr, feature, output, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c[feat]\n"	/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
-		      ".previous" : output : [feat] "i" (feature), ##input)
+	asm volatile (ALTERNATIVE(oldinstr, newinstr, feature)		\
+		: output : "i" (0), ## input)
 
 /*
  * use this macro(s) if you need more than one output parameter

arch/x86/include/asm/amd_iommu.h

@@ -27,6 +27,8 @@ extern int amd_iommu_init(void);
 extern int amd_iommu_init_dma_ops(void);
 extern void amd_iommu_detect(void);
 extern irqreturn_t amd_iommu_int_handler(int irq, void *data);
+extern void amd_iommu_flush_all_domains(void);
+extern void amd_iommu_flush_all_devices(void);
 #else
 static inline int amd_iommu_init(void) { return -ENODEV; }
 static inline void amd_iommu_detect(void) { }

arch/x86/include/asm/amd_iommu_types.h

@@ -194,6 +194,27 @@
 #define PD_DMA_OPS_MASK		(1UL << 0) /* domain used for dma_ops */
 #define PD_DEFAULT_MASK		(1UL << 1) /* domain is a default dma_ops
 					      domain for an IOMMU */
+extern bool amd_iommu_dump;
+#define DUMP_printk(format, arg...)					\
+	do {								\
+		if (amd_iommu_dump)						\
+			printk(KERN_INFO "AMD IOMMU: " format, ## arg);	\
+	} while(0);
+
+/*
+ * Make iterating over all IOMMUs easier
+ */
+#define for_each_iommu(iommu) \
+	list_for_each_entry((iommu), &amd_iommu_list, list)
+#define for_each_iommu_safe(iommu, next) \
+	list_for_each_entry_safe((iommu), (next), &amd_iommu_list, list)
+
+#define APERTURE_RANGE_SHIFT	27	/* 128 MB */
+#define APERTURE_RANGE_SIZE	(1ULL << APERTURE_RANGE_SHIFT)
+#define APERTURE_RANGE_PAGES	(APERTURE_RANGE_SIZE >> PAGE_SHIFT)
+#define APERTURE_MAX_RANGES	32	/* allows 4GB of DMA address space */
+#define APERTURE_RANGE_INDEX(a)	((a) >> APERTURE_RANGE_SHIFT)
+#define APERTURE_PAGE_INDEX(a)	(((a) >> 21) & 0x3fULL)
 
 /*
  * This structure contains generic data for  IOMMU protection domains
@@ -209,6 +230,26 @@ struct protection_domain {
 	void *priv;		/* private data */
 };
 
+/*
+ * For dynamic growth the aperture size is split into ranges of 128MB of
+ * DMA address space each. This struct represents one such range.
+ */
+struct aperture_range {
+
+	/* address allocation bitmap */
+	unsigned long *bitmap;
+
+	/*
+	 * Array of PTE pages for the aperture. In this array we save all the
+	 * leaf pages of the domain page table used for the aperture. This way
+	 * we don't need to walk the page table to find a specific PTE. We can
+	 * just calculate its address in constant time.
+	 */
+	u64 *pte_pages[64];
+
+	unsigned long offset;
+};
+
 /*
  * Data container for a dma_ops specific protection domain
  */
@@ -222,18 +263,10 @@ struct dma_ops_domain {
 	unsigned long aperture_size;
 
 	/* address we start to search for free addresses */
-	unsigned long next_bit;
-
-	/* address allocation bitmap */
-	unsigned long *bitmap;
+	unsigned long next_address;
 
-	/*
-	 * Array of PTE pages for the aperture. In this array we save all the
-	 * leaf pages of the domain page table used for the aperture. This way
-	 * we don't need to walk the page table to find a specific PTE. We can
-	 * just calculate its address in constant time.
-	 */
-	u64 **pte_pages;
+	/* address space relevant data */
+	struct aperture_range *aperture[APERTURE_MAX_RANGES];
 
 	/* This will be set to true when TLB needs to be flushed */
 	bool need_flush;

arch/x86/include/asm/apic.h

@@ -107,8 +107,7 @@ extern u32 native_safe_apic_wait_icr_idle(void);
 extern void native_apic_icr_write(u32 low, u32 id);
 extern u64 native_apic_icr_read(void);
 
-#define EIM_8BIT_APIC_ID	0
-#define EIM_32BIT_APIC_ID	1
+extern int x2apic_mode;
 
 #ifdef CONFIG_X86_X2APIC
 /*
@@ -166,10 +165,9 @@ static inline u64 native_x2apic_icr_read(void)
 	return val;
 }
 
-extern int x2apic, x2apic_phys;
+extern int x2apic_phys;
 extern void check_x2apic(void);
 extern void enable_x2apic(void);
-extern void enable_IR_x2apic(void);
 extern void x2apic_icr_write(u32 low, u32 id);
 static inline int x2apic_enabled(void)
 {
@@ -183,6 +181,8 @@ static inline int x2apic_enabled(void)
 		return 1;
 	return 0;
 }
+
+#define x2apic_supported()	(cpu_has_x2apic)
 #else
 static inline void check_x2apic(void)
 {
@@ -190,28 +190,20 @@ static inline void check_x2apic(void)
 static inline void enable_x2apic(void)
 {
 }
-static inline void enable_IR_x2apic(void)
-{
-}
 static inline int x2apic_enabled(void)
 {
 	return 0;
 }
 
-#define	x2apic	0
-
+#define	x2apic_preenabled 0
+#define	x2apic_supported()	0
 #endif
 
-extern int get_physical_broadcast(void);
+extern void enable_IR_x2apic(void);
 
-#ifdef CONFIG_X86_X2APIC
-static inline void ack_x2APIC_irq(void)
-{
-	/* Docs say use 0 for future compatibility */
-	native_apic_msr_write(APIC_EOI, 0);
-}
-#endif
+extern int get_physical_broadcast(void);
 
+extern void apic_disable(void);
 extern int lapic_get_maxlvt(void);
 extern void clear_local_APIC(void);
 extern void connect_bsp_APIC(void);
@@ -252,7 +244,7 @@ static inline void lapic_shutdown(void) { }
 #define local_apic_timer_c2_ok		1
 static inline void init_apic_mappings(void) { }
 static inline void disable_local_APIC(void) { }
-
+static inline void apic_disable(void) { }
 #endif /* !CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_64
@@ -410,7 +402,7 @@ static inline unsigned default_get_apic_id(unsigned long x)
 {
 	unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
 
-	if (APIC_XAPIC(ver))
+	if (APIC_XAPIC(ver) || boot_cpu_has(X86_FEATURE_EXTD_APICID))
 		return (x >> 24) & 0xFF;
 	else
 		return (x >> 24) & 0x0F;
@@ -478,6 +470,9 @@ static inline unsigned int read_apic_id(void)
 extern void default_setup_apic_routing(void);
 
 #ifdef CONFIG_X86_32
+
+extern struct apic apic_default;
+
 /*
  * Set up the logical destination ID.
  *

arch/x86/include/asm/apicdef.h

@@ -22,6 +22,7 @@
 #  define	APIC_INTEGRATED(x)	(1)
 #endif
 #define		APIC_XAPIC(x)		((x) >= 0x14)
+#define		APIC_EXT_SPACE(x)	((x) & 0x80000000)
 #define	APIC_TASKPRI	0x80
 #define		APIC_TPRI_MASK		0xFFu
 #define	APIC_ARBPRI	0x90
@@ -116,7 +117,9 @@
 #define		APIC_TDR_DIV_32		0x8
 #define		APIC_TDR_DIV_64		0x9
 #define		APIC_TDR_DIV_128	0xA
-#define	APIC_EILVT0     0x500
+#define	APIC_EFEAT	0x400
+#define	APIC_ECTRL	0x410
+#define APIC_EILVTn(n)	(0x500 + 0x10 * n)
 #define		APIC_EILVT_NR_AMD_K8	1	/* # of extended interrupts */
 #define		APIC_EILVT_NR_AMD_10H	4
 #define		APIC_EILVT_LVTOFF(x)	(((x) >> 4) & 0xF)
@@ -125,9 +128,6 @@
 #define		APIC_EILVT_MSG_NMI	0x4
 #define		APIC_EILVT_MSG_EXT	0x7
 #define		APIC_EILVT_MASKED	(1 << 16)
-#define	APIC_EILVT1     0x510
-#define	APIC_EILVT2     0x520
-#define	APIC_EILVT3     0x530
 
 #define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
 #define APIC_BASE_MSR	0x800

arch/x86/include/asm/boot.h

@@ -8,11 +8,26 @@
 
 #ifdef __KERNEL__
 
+#include <asm/page_types.h>
+
 /* Physical address where kernel should be loaded. */
 #define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
 				+ (CONFIG_PHYSICAL_ALIGN - 1)) \
 				& ~(CONFIG_PHYSICAL_ALIGN - 1))
 
+/* Minimum kernel alignment, as a power of two */
+#ifdef CONFIG_x86_64
+#define MIN_KERNEL_ALIGN_LG2	PMD_SHIFT
+#else
+#define MIN_KERNEL_ALIGN_LG2	(PAGE_SHIFT+1)
+#endif
+#define MIN_KERNEL_ALIGN	(_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
+
+#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
+	(CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
+#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+#endif
+
 #ifdef CONFIG_KERNEL_BZIP2
 #define BOOT_HEAP_SIZE             0x400000
 #else /* !CONFIG_KERNEL_BZIP2 */

arch/x86/include/asm/bootparam.h

@@ -50,7 +50,8 @@ struct setup_header {
 	__u32	ramdisk_size;
 	__u32	bootsect_kludge;
 	__u16	heap_end_ptr;
-	__u16	_pad1;
+	__u8	ext_loader_ver;
+	__u8	ext_loader_type;
 	__u32	cmd_line_ptr;
 	__u32	initrd_addr_max;
 	__u32	kernel_alignment;

arch/x86/include/asm/cpu_debug.h

@@ -86,105 +86,7 @@ enum cpu_file_bit {
 	CPU_VALUE_BIT,				/* value		*/
 };
 
-#define	CPU_FILE_VALUE			(1 << CPU_VALUE_BIT)
-
-/*
- * DisplayFamily_DisplayModel	Processor Families/Processor Number Series
- * --------------------------	------------------------------------------
- * 05_01, 05_02, 05_04		Pentium, Pentium with MMX
- *
- * 06_01			Pentium Pro
- * 06_03, 06_05			Pentium II Xeon, Pentium II
- * 06_07, 06_08, 06_0A, 06_0B	Pentium III Xeon, Pentum III
- *
- * 06_09, 060D			Pentium M
- *
- * 06_0E			Core Duo, Core Solo
- *
- * 06_0F			Xeon 3000, 3200, 5100, 5300, 7300 series,
- *				Core 2 Quad, Core 2 Extreme, Core 2 Duo,
- *				Pentium dual-core
- * 06_17			Xeon 5200, 5400 series, Core 2 Quad Q9650
- *
- * 06_1C			Atom
- *
- * 0F_00, 0F_01, 0F_02		Xeon, Xeon MP, Pentium 4
- * 0F_03, 0F_04			Xeon, Xeon MP, Pentium 4, Pentium D
- *
- * 0F_06			Xeon 7100, 5000 Series, Xeon MP,
- *				Pentium 4, Pentium D
- */
-
-/* Register processors bits */
-enum cpu_processor_bit {
-	CPU_NONE,
-/* Intel */
-	CPU_INTEL_PENTIUM_BIT,
-	CPU_INTEL_P6_BIT,
-	CPU_INTEL_PENTIUM_M_BIT,
-	CPU_INTEL_CORE_BIT,
-	CPU_INTEL_CORE2_BIT,
-	CPU_INTEL_ATOM_BIT,
-	CPU_INTEL_XEON_P4_BIT,
-	CPU_INTEL_XEON_MP_BIT,
-/* AMD */
-	CPU_AMD_K6_BIT,
-	CPU_AMD_K7_BIT,
-	CPU_AMD_K8_BIT,
-	CPU_AMD_0F_BIT,
-	CPU_AMD_10_BIT,
-	CPU_AMD_11_BIT,
-};
-
-#define	CPU_INTEL_PENTIUM	(1 << CPU_INTEL_PENTIUM_BIT)
-#define	CPU_INTEL_P6		(1 << CPU_INTEL_P6_BIT)
-#define	CPU_INTEL_PENTIUM_M	(1 << CPU_INTEL_PENTIUM_M_BIT)
-#define	CPU_INTEL_CORE		(1 << CPU_INTEL_CORE_BIT)
-#define	CPU_INTEL_CORE2		(1 << CPU_INTEL_CORE2_BIT)
-#define	CPU_INTEL_ATOM		(1 << CPU_INTEL_ATOM_BIT)
-#define	CPU_INTEL_XEON_P4	(1 << CPU_INTEL_XEON_P4_BIT)
-#define	CPU_INTEL_XEON_MP	(1 << CPU_INTEL_XEON_MP_BIT)
-
-#define	CPU_INTEL_PX		(CPU_INTEL_P6 | CPU_INTEL_PENTIUM_M)
-#define	CPU_INTEL_COREX		(CPU_INTEL_CORE | CPU_INTEL_CORE2)
-#define	CPU_INTEL_XEON		(CPU_INTEL_XEON_P4 | CPU_INTEL_XEON_MP)
-#define	CPU_CO_AT		(CPU_INTEL_CORE | CPU_INTEL_ATOM)
-#define	CPU_C2_AT		(CPU_INTEL_CORE2 | CPU_INTEL_ATOM)
-#define	CPU_CX_AT		(CPU_INTEL_COREX | CPU_INTEL_ATOM)
-#define	CPU_CX_XE		(CPU_INTEL_COREX | CPU_INTEL_XEON)
-#define	CPU_P6_XE		(CPU_INTEL_P6 | CPU_INTEL_XEON)
-#define	CPU_PM_CO_AT		(CPU_INTEL_PENTIUM_M | CPU_CO_AT)
-#define	CPU_C2_AT_XE		(CPU_C2_AT | CPU_INTEL_XEON)
-#define	CPU_CX_AT_XE		(CPU_CX_AT | CPU_INTEL_XEON)
-#define	CPU_P6_CX_AT		(CPU_INTEL_P6 | CPU_CX_AT)
-#define	CPU_P6_CX_XE		(CPU_P6_XE | CPU_INTEL_COREX)
-#define	CPU_P6_CX_AT_XE		(CPU_INTEL_P6 | CPU_CX_AT_XE)
-#define	CPU_PM_CX_AT_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_AT_XE)
-#define	CPU_PM_CX_AT		(CPU_INTEL_PENTIUM_M | CPU_CX_AT)
-#define	CPU_PM_CX_XE		(CPU_INTEL_PENTIUM_M | CPU_CX_XE)
-#define	CPU_PX_CX_AT		(CPU_INTEL_PX | CPU_CX_AT)
-#define	CPU_PX_CX_AT_XE		(CPU_INTEL_PX | CPU_CX_AT_XE)
-
-/* Select all supported Intel CPUs */
-#define	CPU_INTEL_ALL		(CPU_INTEL_PENTIUM | CPU_PX_CX_AT_XE)
-
-#define	CPU_AMD_K6		(1 << CPU_AMD_K6_BIT)
-#define	CPU_AMD_K7		(1 << CPU_AMD_K7_BIT)
-#define	CPU_AMD_K8		(1 << CPU_AMD_K8_BIT)
-#define	CPU_AMD_0F		(1 << CPU_AMD_0F_BIT)
-#define	CPU_AMD_10		(1 << CPU_AMD_10_BIT)
-#define	CPU_AMD_11		(1 << CPU_AMD_11_BIT)
-
-#define	CPU_K10_PLUS		(CPU_AMD_10 | CPU_AMD_11)
-#define	CPU_K0F_PLUS		(CPU_AMD_0F | CPU_K10_PLUS)
-#define	CPU_K8_PLUS		(CPU_AMD_K8 | CPU_K0F_PLUS)
-#define	CPU_K7_PLUS		(CPU_AMD_K7 | CPU_K8_PLUS)
-
-/* Select all supported AMD CPUs */
-#define	CPU_AMD_ALL		(CPU_AMD_K6 | CPU_K7_PLUS)
-
-/* Select all supported CPUs */
-#define	CPU_ALL			(CPU_INTEL_ALL | CPU_AMD_ALL)
+#define	CPU_FILE_VALUE		(1 << CPU_VALUE_BIT)
 
 #define MAX_CPU_FILES		512
 
@@ -220,7 +122,6 @@ struct cpu_debug_range {
 	unsigned		min;		/* Register range min	*/
 	unsigned		max;		/* Register range max	*/
 	unsigned		flag;		/* Supported flags	*/
-	unsigned		model;		/* Supported models	*/
 };
 
 #endif /* _ASM_X86_CPU_DEBUG_H */

arch/x86/include/asm/cpufeature.h

@@ -22,7 +22,7 @@
 #define X86_FEATURE_TSC		(0*32+ 4) /* Time Stamp Counter */
 #define X86_FEATURE_MSR		(0*32+ 5) /* Model-Specific Registers */
 #define X86_FEATURE_PAE		(0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_MCE		(0*32+ 7) /* Machine Check Exception */
 #define X86_FEATURE_CX8		(0*32+ 8) /* CMPXCHG8 instruction */
 #define X86_FEATURE_APIC	(0*32+ 9) /* Onboard APIC */
 #define X86_FEATURE_SEP		(0*32+11) /* SYSENTER/SYSEXIT */
@@ -94,6 +94,7 @@
 #define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
 #define X86_FEATURE_NONSTOP_TSC	(3*32+24) /* TSC does not stop in C states */
 #define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
+#define X86_FEATURE_EXTD_APICID	(3*32+26) /* has extended APICID (8 bits) */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* "pni" SSE-3 */
@@ -192,11 +193,11 @@ extern const char * const x86_power_flags[32];
 #define clear_cpu_cap(c, bit)	clear_bit(bit, (unsigned long *)((c)->x86_capability))
 #define setup_clear_cpu_cap(bit) do { \
 	clear_cpu_cap(&boot_cpu_data, bit);	\
-	set_bit(bit, (unsigned long *)cleared_cpu_caps); \
+	set_bit(bit, (unsigned long *)cpu_caps_cleared); \
 } while (0)
 #define setup_force_cpu_cap(bit) do { \
 	set_cpu_cap(&boot_cpu_data, bit);	\
-	clear_bit(bit, (unsigned long *)cleared_cpu_caps);	\
+	set_bit(bit, (unsigned long *)cpu_caps_set);	\
 } while (0)
 
 #define cpu_has_fpu		boot_cpu_has(X86_FEATURE_FPU)

arch/x86/include/asm/ds.h

@@ -15,8 +15,8 @@
  * - buffer allocation (memory accounting)
  *
  *
- * Copyright (C) 2007-2008 Intel Corporation.
- * Markus Metzger <markus.t.metzger@intel.com>, 2007-2008
+ * Copyright (C) 2007-2009 Intel Corporation.
+ * Markus Metzger <markus.t.metzger@intel.com>, 2007-2009
  */
 
 #ifndef _ASM_X86_DS_H
@@ -83,8 +83,10 @@ enum ds_feature {
  * The interrupt threshold is independent from the overflow callback
  * to allow users to use their own overflow interrupt handling mechanism.
  *
- * task: the task to request recording for;
- *       NULL for per-cpu recording on the current cpu
+ * The function might sleep.
+ *
+ * task: the task to request recording for
+ * cpu:  the cpu to request recording for
  * base: the base pointer for the (non-pageable) buffer;
  * size: the size of the provided buffer in bytes
  * ovfl: pointer to a function to be called on buffer overflow;
@@ -93,19 +95,28 @@ enum ds_feature {
  *     -1 if no interrupt threshold is requested.
  * flags: a bit-mask of the above flags
  */
-extern struct bts_tracer *ds_request_bts(struct task_struct *task,
-					 void *base, size_t size,
-					 bts_ovfl_callback_t ovfl,
-					 size_t th, unsigned int flags);
-extern struct pebs_tracer *ds_request_pebs(struct task_struct *task,
-					   void *base, size_t size,
-					   pebs_ovfl_callback_t ovfl,
-					   size_t th, unsigned int flags);
+extern struct bts_tracer *ds_request_bts_task(struct task_struct *task,
+					      void *base, size_t size,
+					      bts_ovfl_callback_t ovfl,
+					      size_t th, unsigned int flags);
+extern struct bts_tracer *ds_request_bts_cpu(int cpu, void *base, size_t size,
+					     bts_ovfl_callback_t ovfl,
+					     size_t th, unsigned int flags);
+extern struct pebs_tracer *ds_request_pebs_task(struct task_struct *task,
+						void *base, size_t size,
+						pebs_ovfl_callback_t ovfl,
+						size_t th, unsigned int flags);
+extern struct pebs_tracer *ds_request_pebs_cpu(int cpu,
+					       void *base, size_t size,
+					       pebs_ovfl_callback_t ovfl,
+					       size_t th, unsigned int flags);
 
 /*
  * Release BTS or PEBS resources
  * Suspend and resume BTS or PEBS tracing
  *
+ * Must be called with irq's enabled.
+ *
  * tracer: the tracer handle returned from ds_request_~()
  */
 extern void ds_release_bts(struct bts_tracer *tracer);
@@ -115,6 +126,28 @@ extern void ds_release_pebs(struct pebs_tracer *tracer);
 extern void ds_suspend_pebs(struct pebs_tracer *tracer);
 extern void ds_resume_pebs(struct pebs_tracer *tracer);
 
+/*
+ * Release BTS or PEBS resources
+ * Suspend and resume BTS or PEBS tracing
+ *
+ * Cpu tracers must call this on the traced cpu.
+ * Task tracers must call ds_release_~_noirq() for themselves.
+ *
+ * May be called with irq's disabled.
+ *
+ * Returns 0 if successful;
+ * -EPERM if the cpu tracer does not trace the current cpu.
+ * -EPERM if the task tracer does not trace itself.
+ *
+ * tracer: the tracer handle returned from ds_request_~()
+ */
+extern int ds_release_bts_noirq(struct bts_tracer *tracer);
+extern int ds_suspend_bts_noirq(struct bts_tracer *tracer);
+extern int ds_resume_bts_noirq(struct bts_tracer *tracer);
+extern int ds_release_pebs_noirq(struct pebs_tracer *tracer);
+extern int ds_suspend_pebs_noirq(struct pebs_tracer *tracer);
+extern int ds_resume_pebs_noirq(struct pebs_tracer *tracer);
+
 
 /*
  * The raw DS buffer state as it is used for BTS and PEBS recording.
@@ -170,9 +203,9 @@ struct bts_struct {
 		} lbr;
 		/* BTS_TASK_ARRIVES or BTS_TASK_DEPARTS */
 		struct {
-			__u64 jiffies;
+			__u64 clock;
 			pid_t pid;
-		} timestamp;
+		} event;
 	} variant;
 };
 
@@ -201,8 +234,12 @@ struct bts_trace {
 struct pebs_trace {
 	struct ds_trace ds;
 
-	/* the PEBS reset value */
-	unsigned long long reset_value;
+	/* the number of valid counters in the below array */
+	unsigned int counters;
+
+#define MAX_PEBS_COUNTERS 4
+	/* the counter reset value */
+	unsigned long long counter_reset[MAX_PEBS_COUNTERS];
 };
 
 
@@ -237,9 +274,11 @@ extern int ds_reset_pebs(struct pebs_tracer *tracer);
  * Returns 0 on success; -Eerrno on error
  *
  * tracer: the tracer handle returned from ds_request_pebs()
+ * counter: the index of the counter
  * value: the new counter reset value
  */
-extern int ds_set_pebs_reset(struct pebs_tracer *tracer, u64 value);
+extern int ds_set_pebs_reset(struct pebs_tracer *tracer,
+			     unsigned int counter, u64 value);
 
 /*
  * Initialization
@@ -252,21 +291,12 @@ extern void __cpuinit ds_init_intel(struct cpuinfo_x86 *);
  */
 extern void ds_switch_to(struct task_struct *prev, struct task_struct *next);
 
-/*
- * Task clone/init and cleanup work
- */
-extern void ds_copy_thread(struct task_struct *tsk, struct task_struct *father);
-extern void ds_exit_thread(struct task_struct *tsk);
-
 #else /* CONFIG_X86_DS */
 
 struct cpuinfo_x86;
 static inline void __cpuinit ds_init_intel(struct cpuinfo_x86 *ignored) {}
 static inline void ds_switch_to(struct task_struct *prev,
 				struct task_struct *next) {}
-static inline void ds_copy_thread(struct task_struct *tsk,
-				  struct task_struct *father) {}
-static inline void ds_exit_thread(struct task_struct *tsk) {}
 
 #endif /* CONFIG_X86_DS */
 #endif /* _ASM_X86_DS_H */

arch/x86/include/asm/hw_irq.h

@@ -65,7 +65,26 @@ extern unsigned long io_apic_irqs;
 extern void init_VISWS_APIC_irqs(void);
 extern void setup_IO_APIC(void);
 extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+
+struct io_apic_irq_attr {
+	int ioapic;
+	int ioapic_pin;
+	int trigger;
+	int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+					int ioapic, int ioapic_pin,
+					int trigger, int polarity)
+{
+	irq_attr->ioapic     = ioapic;
+	irq_attr->ioapic_pin = ioapic_pin;
+	irq_attr->trigger    = trigger;
+	irq_attr->polarity   = polarity;
+}
+
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+					struct io_apic_irq_attr *irq_attr);
 extern void setup_ioapic_dest(void);
 
 extern void enable_IO_APIC(void);
@@ -80,7 +99,11 @@ extern void eisa_set_level_irq(unsigned int irq);
 /* SMP */
 extern void smp_apic_timer_interrupt(struct pt_regs *);
 extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_generic_interrupt(struct pt_regs *);
 extern void smp_error_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_IO_APIC
+extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
+#endif
 #ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(struct pt_regs *);
 extern void smp_call_function_interrupt(struct pt_regs *);