Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Merge 'net' into 'net-next' to get the MSG_CMSG_COMPAT
regression fix.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/filesystems/xfs.txt

@@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted.
 	removing extended attributes) the on-disk superblock feature
 	bit field will be updated to reflect this format being in use.
 
+	CRC enabled filesystems always use the attr2 format, and so
+	will reject the noattr2 mount option if it is set.
+
   barrier
 	Enables the use of block layer write barriers for writes into
 	the journal and unwritten extent conversion.  This allows for

arch/arm/include/asm/tlb.h

@@ -33,18 +33,6 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb)	0
-#else
-#define tlb_fast_mode(tlb)	1
-#endif
-
 #define MMU_GATHER_BUNDLE	8
 
 /*
@@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 {
 	tlb_flush(tlb);
-	if (!tlb_fast_mode(tlb)) {
-		free_pages_and_swap_cache(tlb->pages, tlb->nr);
-		tlb->nr = 0;
-		if (tlb->pages == tlb->local)
-			__tlb_alloc_page(tlb);
-	}
+	free_pages_and_swap_cache(tlb->pages, tlb->nr);
+	tlb->nr = 0;
+	if (tlb->pages == tlb->local)
+		__tlb_alloc_page(tlb);
 }
 
 static inline void
@@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 
 static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 {
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return 1; /* avoid calling tlb_flush_mmu */
-	}
-
 	tlb->pages[tlb->nr++] = page;
 	VM_BUG_ON(tlb->nr > tlb->max);
 	return tlb->max - tlb->nr;

arch/ia64/include/asm/tlb.h

@@ -46,12 +46,6 @@
 #include <asm/tlbflush.h>
 #include <asm/machvec.h>
 
-#ifdef CONFIG_SMP
-# define tlb_fast_mode(tlb)	((tlb)->nr == ~0U)
-#else
-# define tlb_fast_mode(tlb)	(1)
-#endif
-
 /*
  * If we can't allocate a page to make a big batch of page pointers
  * to work on, then just handle a few from the on-stack structure.
@@ -60,7 +54,7 @@
 
 struct mmu_gather {
 	struct mm_struct	*mm;
-	unsigned int		nr;		/* == ~0U => fast mode */
+	unsigned int		nr;
 	unsigned int		max;
 	unsigned char		fullmm;		/* non-zero means full mm flush */
 	unsigned char		need_flush;	/* really unmapped some PTEs? */
@@ -103,6 +97,7 @@ extern struct ia64_tr_entry *ia64_idtrs[NR_CPUS];
 static inline void
 ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
 {
+	unsigned long i;
 	unsigned int nr;
 
 	if (!tlb->need_flush)
@@ -141,13 +136,11 @@ ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long e
 
 	/* lastly, release the freed pages */
 	nr = tlb->nr;
-	if (!tlb_fast_mode(tlb)) {
-		unsigned long i;
-		tlb->nr = 0;
-		tlb->start_addr = ~0UL;
-		for (i = 0; i < nr; ++i)
-			free_page_and_swap_cache(tlb->pages[i]);
-	}
+
+	tlb->nr = 0;
+	tlb->start_addr = ~0UL;
+	for (i = 0; i < nr; ++i)
+		free_page_and_swap_cache(tlb->pages[i]);
 }
 
 static inline void __tlb_alloc_page(struct mmu_gather *tlb)
@@ -167,20 +160,7 @@ tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, unsigned int full_m
 	tlb->mm = mm;
 	tlb->max = ARRAY_SIZE(tlb->local);
 	tlb->pages = tlb->local;
-	/*
-	 * Use fast mode if only 1 CPU is online.
-	 *
-	 * It would be tempting to turn on fast-mode for full_mm_flush as well.  But this
-	 * doesn't work because of speculative accesses and software prefetching: the page
-	 * table of "mm" may (and usually is) the currently active page table and even
-	 * though the kernel won't do any user-space accesses during the TLB shoot down, a
-	 * compiler might use speculation or lfetch.fault on what happens to be a valid
-	 * user-space address.  This in turn could trigger a TLB miss fault (or a VHPT
-	 * walk) and re-insert a TLB entry we just removed.  Slow mode avoids such
-	 * problems.  (We could make fast-mode work by switching the current task to a
-	 * different "mm" during the shootdown.) --davidm 08/02/2002
-	 */
-	tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+	tlb->nr = 0;
 	tlb->fullmm = full_mm_flush;
 	tlb->start_addr = ~0UL;
 }
@@ -214,11 +194,6 @@ static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 {
 	tlb->need_flush = 1;
 
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return 1; /* avoid calling tlb_flush_mmu */
-	}
-
 	if (!tlb->nr && tlb->pages == tlb->local)
 		__tlb_alloc_page(tlb);
 

arch/x86/pci/common.c

@@ -628,7 +628,9 @@ int pcibios_add_device(struct pci_dev *dev)
 
 	pa_data = boot_params.hdr.setup_data;
 	while (pa_data) {
-		data = phys_to_virt(pa_data);
+		data = ioremap(pa_data, sizeof(*rom));
+		if (!data)
+			return -ENOMEM;
 
 		if (data->type == SETUP_PCI) {
 			rom = (struct pci_setup_rom *)data;
@@ -645,6 +647,7 @@ int pcibios_add_device(struct pci_dev *dev)
 			}
 		}
 		pa_data = data->next;
+		iounmap(data);
 	}
 	return 0;
 }

drivers/iio/buffer_cb.c

@@ -64,7 +64,7 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 	while (chan->indio_dev) {
 		if (chan->indio_dev != indio_dev) {
 			ret = -EINVAL;
-			goto error_release_channels;
+			goto error_free_scan_mask;
 		}
 		set_bit(chan->channel->scan_index,
 			cb_buff->buffer.scan_mask);
@@ -73,6 +73,8 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 
 	return cb_buff;
 
+error_free_scan_mask:
+	kfree(cb_buff->buffer.scan_mask);
 error_release_channels:
 	iio_channel_release_all(cb_buff->channels);
 error_free_cb_buff:
@@ -100,6 +102,7 @@ EXPORT_SYMBOL_GPL(iio_channel_stop_all_cb);
 
 void iio_channel_release_all_cb(struct iio_cb_buffer *cb_buff)
 {
+	kfree(cb_buff->buffer.scan_mask);
 	iio_channel_release_all(cb_buff->channels);
 	kfree(cb_buff);
 }

drivers/iio/frequency/adf4350.c

@@ -212,7 +212,7 @@ static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
 		(pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS |
 		ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N |
 		ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) |
-		ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x9)));
+		ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3)));
 
 	st->regs[ADF4350_REG3] = pdata->r3_user_settings &
 				 (ADF4350_REG3_12BIT_CLKDIV(0xFFF) |

drivers/iio/inkern.c

@@ -124,7 +124,7 @@ static int __of_iio_channel_get(struct iio_channel *channel,
 	channel->indio_dev = indio_dev;
 	index = iiospec.args_count ? iiospec.args[0] : 0;
 	if (index >= indio_dev->num_channels) {
-		return -EINVAL;
+		err = -EINVAL;
 		goto err_put;
 	}
 	channel->channel = &indio_dev->channels[index];
@@ -450,7 +450,7 @@ static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan,
 	s64 raw64 = raw;
 	int ret;
 
-	ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_SCALE);
+	ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET);
 	if (ret == 0)
 		raw64 += offset;
 

drivers/staging/android/alarm-dev.c

@@ -264,6 +264,8 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	}
 
 	rv = alarm_do_ioctl(file, cmd, &ts);
+	if (rv)
+		return rv;
 
 	switch (ANDROID_ALARM_BASE_CMD(cmd)) {
 	case ANDROID_ALARM_GET_TIME(0):
@@ -272,7 +274,7 @@ static long alarm_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 	}
 
-	return rv;
+	return 0;
 }
 #ifdef CONFIG_COMPAT
 static long alarm_compat_ioctl(struct file *file, unsigned int cmd,
@@ -295,6 +297,8 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd,
 	}
 
 	rv = alarm_do_ioctl(file, cmd, &ts);
+	if (rv)
+		return rv;
 
 	switch (ANDROID_ALARM_BASE_CMD(cmd)) {
 	case ANDROID_ALARM_GET_TIME(0): /* NOTE: we modified cmd above */
@@ -303,7 +307,7 @@ static long alarm_compat_ioctl(struct file *file, unsigned int cmd,
 		break;
 	}
 
-	return rv;
+	return 0;
 }
 #endif
 

drivers/staging/dwc2/hcd.c

@@ -2804,9 +2804,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq,
 
 	/* Set device flags indicating whether the HCD supports DMA */
 	if (hsotg->core_params->dma_enable > 0) {
-		if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0)
-			dev_warn(hsotg->dev,
-				 "can't enable workaround for >2GB RAM\n");
+		if (dma_set_mask(hsotg->dev, DMA_BIT_MASK(32)) < 0)
+			dev_warn(hsotg->dev, "can't set DMA mask\n");
 		if (dma_set_coherent_mask(hsotg->dev, DMA_BIT_MASK(31)) < 0)
 			dev_warn(hsotg->dev,
 				 "can't enable workaround for >2GB RAM\n");

drivers/staging/zcache/ramster.h

@@ -11,10 +11,6 @@
 #ifndef _ZCACHE_RAMSTER_H_
 #define _ZCACHE_RAMSTER_H_
 
-#ifdef CONFIG_RAMSTER_MODULE
-#define CONFIG_RAMSTER
-#endif
-
 #ifdef CONFIG_RAMSTER
 #include "ramster/ramster.h"
 #else

drivers/staging/zcache/ramster/debug.c

@@ -1,6 +1,8 @@
 #include <linux/atomic.h>
 #include "debug.h"
 
+ssize_t ramster_foreign_eph_pages;
+ssize_t ramster_foreign_pers_pages;
 #ifdef CONFIG_DEBUG_FS
 #include <linux/debugfs.h>
 

drivers/staging/zcache/ramster/ramster.c

@@ -66,8 +66,6 @@ static int ramster_remote_target_nodenum __read_mostly = -1;
 
 /* Used by this code. */
 long ramster_flnodes;
-ssize_t ramster_foreign_eph_pages;
-ssize_t ramster_foreign_pers_pages;
 /* FIXME frontswap selfshrinking knobs in debugfs? */
 
 static LIST_HEAD(ramster_rem_op_list);
@@ -399,14 +397,18 @@ void ramster_count_foreign_pages(bool eph, int count)
 			inc_ramster_foreign_eph_pages();
 		} else {
 			dec_ramster_foreign_eph_pages();
+#ifdef CONFIG_RAMSTER_DEBUG
 			WARN_ON_ONCE(ramster_foreign_eph_pages < 0);
+#endif
 		}
 	} else {
 		if (count > 0) {
 			inc_ramster_foreign_pers_pages();
 		} else {
 			dec_ramster_foreign_pers_pages();
+#ifdef CONFIG_RAMSTER_DEBUG
 			WARN_ON_ONCE(ramster_foreign_pers_pages < 0);
+#endif
 		}
 	}
 }

drivers/tty/serial/8250/8250_core.c

@@ -2755,7 +2755,7 @@ static void __init serial8250_isa_init_ports(void)
 	if (nr_uarts > UART_NR)
 		nr_uarts = UART_NR;
 
-	for (i = 0; i < UART_NR; i++) {
+	for (i = 0; i < nr_uarts; i++) {
 		struct uart_8250_port *up = &serial8250_ports[i];
 		struct uart_port *port = &up->port;
 
@@ -2916,7 +2916,7 @@ static int __init serial8250_console_setup(struct console *co, char *options)
 	 * if so, search for the first available port that does have
 	 * console support.
 	 */
-	if (co->index >= UART_NR)
+	if (co->index >= nr_uarts)
 		co->index = 0;
 	port = &serial8250_ports[co->index].port;
 	if (!port->iobase && !port->membase)
@@ -2957,7 +2957,7 @@ int serial8250_find_port(struct uart_port *p)
 	int line;
 	struct uart_port *port;
 
-	for (line = 0; line < UART_NR; line++) {
+	for (line = 0; line < nr_uarts; line++) {
 		port = &serial8250_ports[line].port;
 		if (uart_match_port(p, port))
 			return line;
@@ -3110,7 +3110,7 @@ static int serial8250_remove(struct platform_device *dev)
 {
 	int i;
 
-	for (i = 0; i < UART_NR; i++) {
+	for (i = 0; i < nr_uarts; i++) {
 		struct uart_8250_port *up = &serial8250_ports[i];
 
 		if (up->port.dev == &dev->dev)
@@ -3178,7 +3178,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	/*
 	 * First, find a port entry which matches.
 	 */
-	for (i = 0; i < UART_NR; i++)
+	for (i = 0; i < nr_uarts; i++)
 		if (uart_match_port(&serial8250_ports[i].port, port))
 			return &serial8250_ports[i];
 
@@ -3187,7 +3187,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	 * free entry.  We look for one which hasn't been previously
 	 * used (indicated by zero iobase).
 	 */
-	for (i = 0; i < UART_NR; i++)
+	for (i = 0; i < nr_uarts; i++)
 		if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
 		    serial8250_ports[i].port.iobase == 0)
 			return &serial8250_ports[i];
@@ -3196,7 +3196,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *
 	 * That also failed.  Last resort is to find any entry which
 	 * doesn't have a real port associated with it.
 	 */
-	for (i = 0; i < UART_NR; i++)
+	for (i = 0; i < nr_uarts; i++)
 		if (serial8250_ports[i].port.type == PORT_UNKNOWN)
 			return &serial8250_ports[i];
 

drivers/tty/serial/imx.c

@@ -761,6 +761,8 @@ static int imx_startup(struct uart_port *port)
 
 	temp = readl(sport->port.membase + UCR2);
 	temp |= (UCR2_RXEN | UCR2_TXEN);
+	if (!sport->have_rtscts)
+		temp |= UCR2_IRTS;
 	writel(temp, sport->port.membase + UCR2);
 
 	if (USE_IRDA(sport)) {

drivers/tty/serial/samsung.c

@@ -1166,6 +1166,18 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		ourport->tx_irq = ret;
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
+	if (IS_ERR(ourport->clk)) {
+		pr_err("%s: Controller clock not found\n",
+				dev_name(&platdev->dev));
+		return PTR_ERR(ourport->clk);
+	}
+
+	ret = clk_prepare_enable(ourport->clk);
+	if (ret) {
+		pr_err("uart: clock failed to prepare+enable: %d\n", ret);
+		clk_put(ourport->clk);
+		return ret;
+	}
 
 	/* Keep all interrupts masked and cleared */
 	if (s3c24xx_serial_has_interrupt_mask(port)) {
@@ -1180,6 +1192,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
+	clk_disable_unprepare(ourport->clk);
 	return 0;
 }
 

drivers/usb/core/devio.c

@@ -1287,9 +1287,13 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
 			goto error;
 		}
 		for (totlen = u = 0; u < uurb->number_of_packets; u++) {
-			/* arbitrary limit,
-			 * sufficient for USB 2.0 high-bandwidth iso */
-			if (isopkt[u].length > 8192) {
+			/*
+			 * arbitrary limit need for USB 3.0
+			 * bMaxBurst (0~15 allowed, 1~16 packets)
+			 * bmAttributes (bit 1:0, mult 0~2, 1~3 packets)
+			 * sizemax: 1024 * 16 * 3 = 49152
+			 */
+			if (isopkt[u].length > 49152) {
 				ret = -EINVAL;
 				goto error;
 			}

drivers/usb/dwc3/dwc3-exynos.c

@@ -164,9 +164,9 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
 {
 	struct dwc3_exynos	*exynos = platform_get_drvdata(pdev);
 
+	device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
 	platform_device_unregister(exynos->usb2_phy);
 	platform_device_unregister(exynos->usb3_phy);
-	device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
 
 	clk_disable_unprepare(exynos->clk);
 

drivers/usb/dwc3/dwc3-pci.c

@@ -196,9 +196,9 @@ static void dwc3_pci_remove(struct pci_dev *pci)
 {
 	struct dwc3_pci	*glue = pci_get_drvdata(pci);
 
+	platform_device_unregister(glue->dwc3);
 	platform_device_unregister(glue->usb2_phy);
 	platform_device_unregister(glue->usb3_phy);
-	platform_device_unregister(glue->dwc3);
 	pci_set_drvdata(pci, NULL);
 	pci_disable_device(pci);
 }

drivers/usb/dwc3/gadget.c

@@ -1706,11 +1706,19 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 		dep = dwc->eps[epnum];
 		if (!dep)
 			continue;
-
-		dwc3_free_trb_pool(dep);
-
-		if (epnum != 0 && epnum != 1)
+		/*
+		 * Physical endpoints 0 and 1 are special; they form the
+		 * bi-directional USB endpoint 0.
+		 *
+		 * For those two physical endpoints, we don't allocate a TRB
+		 * pool nor do we add them the endpoints list. Due to that, we
+		 * shouldn't do these two operations otherwise we would end up
+		 * with all sorts of bugs when removing dwc3.ko.
+		 */
+		if (epnum != 0 && epnum != 1) {
+			dwc3_free_trb_pool(dep);
 			list_del(&dep->endpoint.ep_list);
+		}
 
 		kfree(dep);
 	}

drivers/usb/host/ehci-sched.c

@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
 }
 
 static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
 
 /* carryover low/fullspeed bandwidth that crosses uframe boundries */
 static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
@@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 	/* reschedule QH iff another request is queued */
 	if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
 		rc = qh_schedule(ehci, qh);
+		if (rc == 0) {
+			qh_refresh(ehci, qh);
+			qh_link_periodic(ehci, qh);
+		}
 
 		/* An error here likely indicates handshake failure
 		 * or no space left in the schedule.  Neither fault
@@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
 		 *
 		 * FIXME kill the now-dysfunctional queued urbs
 		 */
-		if (rc != 0)
+		else {
 			ehci_err(ehci, "can't reschedule qh %p, err %d\n",
 					qh, rc);
+		}
 	}
 
 	/* maybe turn off periodic schedule */

drivers/usb/host/xhci-mem.c

@@ -1827,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	}
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
+	if (!xhci->rh_bw)
+		goto no_bw;
+
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
 	for (i = 0; i < num_ports; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1845,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 		}
 	}
 
+no_bw:
 	xhci->num_usb2_ports = 0;
 	xhci->num_usb3_ports = 0;
 	xhci->num_active_eps = 0;
@@ -2256,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	u32 page_size, temp;
 	int i;
 
+	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
 	page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
 	xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
 	for (i = 0; i < 16; i++) {
@@ -2334,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
-	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
 	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2445,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	if (xhci_setup_port_arrays(xhci, flags))
 		goto fail;
 
-	INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
 	/* Enable USB 3.0 device notifications for function remote wake, which
 	 * is necessary for allowing USB 3.0 devices to do remote wakeup from
 	 * U3 (device suspend).

drivers/usb/host/xhci-pci.c

@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
+
+	/*
+	 * Systems with the TI redriver that loses port status change events
+	 * need to have the registers polled during D3, so avoid D3cold.
+	 */
+	if (xhci_compliance_mode_recovery_timer_quirk_check())
+		pdev->no_d3cold = true;
 
 	return xhci_suspend(xhci);
 }

drivers/usb/host/xhci.c

@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
  * Systems:
  * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
  */
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
 {
 	const char *dmi_product_name, *dmi_sys_vendor;
 
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
 	xhci_dbg(xhci, "Finished xhci_init\n");
 
 	/* Initializing Compliance Mode Recovery Data If Needed */
-	if (compliance_mode_recovery_timer_quirk_check()) {
+	if (xhci_compliance_mode_recovery_timer_quirk_check()) {
 		xhci->quirks |= XHCI_COMP_MODE_QUIRK;
 		compliance_mode_recovery_timer_init(xhci);
 	}
@@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
+	bool			comp_timer_running = false;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 
 	/* If restore operation fails, re-initialize the HC during resume */
 	if ((temp & STS_SRE) || hibernated) {
+
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				!(xhci_all_ports_seen_u0(xhci))) {
+			del_timer_sync(&xhci->comp_mode_recovery_timer);
+			xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+		}
+
 		/* Let the USB core know _both_ roothubs lost power. */
 		usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
 		usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		retval = xhci_init(hcd->primary_hcd);
 		if (retval)
 			return retval;
+		comp_timer_running = true;
+
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
 		if (!retval) {
@@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	 * to suffer the Compliance Mode issue again. It doesn't matter if
 	 * ports have entered previously to U0 before system's suspension.
 	 */
-	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
 		compliance_mode_recovery_timer_init(xhci);
 
 	/* Re-enable port polling. */

drivers/usb/host/xhci.h

@@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
 struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
 struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
 
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
 #endif /* __LINUX_XHCI_HCD_H */

drivers/usb/musb/musb_host.c

@@ -1232,7 +1232,6 @@ void musb_host_tx(struct musb *musb, u8 epnum)
 	void __iomem		*mbase = musb->mregs;
 	struct dma_channel	*dma;
 	bool			transfer_pending = false;
-	static bool use_sg;
 
 	musb_ep_select(mbase, epnum);
 	tx_csr = musb_readw(epio, MUSB_TXCSR);
@@ -1463,9 +1462,9 @@ done:
 	 * NULL.
 	 */
 	if (!urb->transfer_buffer)
-		use_sg = true;
+		qh->use_sg = true;
 
-	if (use_sg) {
+	if (qh->use_sg) {
 		/* sg_miter_start is already done in musb_ep_program */
 		if (!sg_miter_next(&qh->sg_miter)) {
 			dev_err(musb->controller, "error: sg list empty\n");
@@ -1484,9 +1483,9 @@ done:
 
 	qh->segsize = length;
 
-	if (use_sg) {
+	if (qh->use_sg) {
 		if (offset + length >= urb->transfer_buffer_length)
-			use_sg = false;
+			qh->use_sg = false;
 	}
 
 	musb_ep_select(mbase, epnum);
@@ -1552,7 +1551,6 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 	bool			done = false;
 	u32			status;
 	struct dma_channel	*dma;
-	static bool use_sg;
 	unsigned int sg_flags = SG_MITER_ATOMIC | SG_MITER_TO_SG;
 
 	musb_ep_select(mbase, epnum);
@@ -1878,12 +1876,12 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			 * NULL.
 			 */
 			if (!urb->transfer_buffer) {
-				use_sg = true;
+				qh->use_sg = true;
 				sg_miter_start(&qh->sg_miter, urb->sg, 1,
 						sg_flags);
 			}
 
-			if (use_sg) {
+			if (qh->use_sg) {
 				if (!sg_miter_next(&qh->sg_miter)) {
 					dev_err(musb->controller, "error: sg list empty\n");
 					sg_miter_stop(&qh->sg_miter);
@@ -1913,8 +1911,8 @@ finish:
 	urb->actual_length += xfer_len;
 	qh->offset += xfer_len;
 	if (done) {
-		if (use_sg)
-			use_sg = false;
+		if (qh->use_sg)
+			qh->use_sg = false;
 
 		if (urb->status == -EINPROGRESS)
 			urb->status = status;

drivers/usb/musb/musb_host.h

@@ -74,6 +74,7 @@ struct musb_qh {
 	u16			frame;		/* for periodic schedule */
 	unsigned		iso_idx;	/* in urb->iso_frame_desc[] */
 	struct sg_mapping_iter sg_miter;	/* for highmem in PIO mode */
+	bool			use_sg;		/* to track urb using sglist */
 };
 
 /* map from control or bulk queue head to the first qh on that ring */

drivers/usb/serial/ark3116.c

@@ -43,7 +43,7 @@
 #define DRIVER_NAME "ark3116"
 
 /* usb timeout of 1 second */
-#define ARK_TIMEOUT (1*HZ)
+#define ARK_TIMEOUT 1000
 
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(0x6547, 0x0232) },

drivers/usb/serial/cypress_m8.c

@@ -65,6 +65,7 @@ static const struct usb_device_id id_table_earthmate[] = {
 static const struct usb_device_id id_table_cyphidcomrs232[] = {
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ }						/* Terminating entry */
 };
 
@@ -78,6 +79,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 	{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+	{ USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
 	{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
 	{ }						/* Terminating entry */
 };
@@ -229,6 +231,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
  * Cypress serial helper functions
  *****************************************************************************/
 
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+	return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+		(le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
 
 static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 {
@@ -238,6 +246,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
 	if (unstable_bauds)
 		return new_rate;
 
+	/* FRWD Dongle uses 115200 bps */
+	if (is_frwd(port->serial->dev))
+		return new_rate;
+
 	/*
 	 * The general purpose firmware for the Cypress M8 allows for
 	 * a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -448,7 +460,11 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 	}
 
-	usb_reset_configuration(serial->dev);
+	/* Skip reset for FRWD device. It is a workaound:
+	   device hangs if it receives SET_CONFIGURE in Configured
+	   state. */
+	if (!is_frwd(serial->dev))
+		usb_reset_configuration(serial->dev);
 
 	priv->cmd_ctrl = 0;
 	priv->line_control = 0;

drivers/usb/serial/cypress_m8.h

@@ -24,6 +24,10 @@
 #define VENDOR_ID_CYPRESS		0x04b4
 #define PRODUCT_ID_CYPHIDCOM		0x5500
 
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD			0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD	0x0001
+
 /* Powercom UPS, chip CY7C63723 */
 #define VENDOR_ID_POWERCOM		0x0d9f
 #define PRODUCT_ID_UPS			0x0002

drivers/usb/serial/iuu_phoenix.c

@@ -287,7 +287,7 @@ static int bulk_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	    usb_bulk_msg(serial->dev,
 			 usb_sndbulkpipe(serial->dev,
 					 port->bulk_out_endpointAddress), buf,
-			 count, &actual, HZ * 1);
+			 count, &actual, 1000);
 
 	if (status != IUU_OPERATION_OK)
 		dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);
@@ -307,7 +307,7 @@ static int read_immediate(struct usb_serial_port *port, u8 *buf, u8 count)
 	    usb_bulk_msg(serial->dev,
 			 usb_rcvbulkpipe(serial->dev,
 					 port->bulk_in_endpointAddress), buf,
-			 count, &actual, HZ * 1);
+			 count, &actual, 1000);
 
 	if (status != IUU_OPERATION_OK)
 		dev_dbg(&port->dev, "%s - error = %2x\n", __func__, status);

drivers/usb/serial/keyspan.c

@@ -1548,7 +1548,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	struct keyspan_serial_private 		*s_priv;
 	struct keyspan_port_private 		*p_priv;
 	const struct keyspan_device_details	*d_details;
-	int 					outcont_urb;
 	struct urb				*this_urb;
 	int 					device_port, err;
 
@@ -1559,7 +1558,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	d_details = s_priv->device_details;
 	device_port = port->number - port->serial->minor;
 
-	outcont_urb = d_details->outcont_endpoints[port->number];
 	this_urb = p_priv->outcont_urb;
 
 	dev_dbg(&port->dev, "%s - endpoint %d\n", __func__, usb_pipeendpoint(this_urb->pipe));
@@ -1685,14 +1683,6 @@ static int keyspan_usa26_send_setup(struct usb_serial *serial,
 	err = usb_submit_urb(this_urb, GFP_ATOMIC);
 	if (err != 0)
 		dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err);
-#if 0
-	else {
-		dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__
-			outcont_urb, this_urb->transfer_buffer_length,
-			usb_pipeendpoint(this_urb->pipe));
-	}
-#endif
-
 	return 0;
 }
 

drivers/usb/serial/mos7720.c

@@ -40,7 +40,7 @@
 #define DRIVER_DESC "Moschip USB Serial Driver"
 
 /* default urb timeout */
-#define MOS_WDR_TIMEOUT	(HZ * 5)
+#define MOS_WDR_TIMEOUT	5000
 
 #define MOS_MAX_PORT	0x02
 #define MOS_WRITE	0x0E
@@ -227,11 +227,22 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum,
 	__u8 requesttype = (__u8)0xc0;
 	__u16 index = get_reg_index(reg);
 	__u16 value = get_reg_value(reg, serial_portnum);
-	int status = usb_control_msg(usbdev, pipe, request, requesttype, value,
-				     index, data, 1, MOS_WDR_TIMEOUT);
-	if (status < 0)
+	u8 *buf;
+	int status;
+
+	buf = kmalloc(1, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	status = usb_control_msg(usbdev, pipe, request, requesttype, value,
+				     index, buf, 1, MOS_WDR_TIMEOUT);
+	if (status == 1)
+		*data = *buf;
+	else if (status < 0)
 		dev_err(&usbdev->dev,
 			"mos7720: usb_control_msg() failed: %d", status);
+	kfree(buf);
+
 	return status;
 }
 
@@ -1618,7 +1629,7 @@ static void change_port_settings(struct tty_struct *tty,
 		mos7720_port->shadowMCR |= (UART_MCR_XONANY);
 		/* To set hardware flow control to the specified *
 		 * serial port, in SP1/2_CONTROL_REG             */
-		if (port->number)
+		if (port_number)
 			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
 		else
 			write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
@@ -1927,7 +1938,7 @@ static int mos7720_startup(struct usb_serial *serial)
 
 	/* setting configuration feature to one */
 	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5*HZ);
+			(__u8)0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5000);
 
 	/* start the interrupt urb */
 	ret_val = usb_submit_urb(serial->port[0]->interrupt_in_urb, GFP_KERNEL);
@@ -1970,7 +1981,7 @@ static void mos7720_release(struct usb_serial *serial)
 		/* wait for synchronous usb calls to return */
 		if (mos_parport->msg_pending)
 			wait_for_completion_timeout(&mos_parport->syncmsg_compl,
-						    MOS_WDR_TIMEOUT);
+					    msecs_to_jiffies(MOS_WDR_TIMEOUT));
 
 		parport_remove_port(mos_parport->pp);
 		usb_set_serial_data(serial, NULL);

drivers/usb/serial/mos7840.c

@@ -2142,13 +2142,21 @@ static int mos7840_ioctl(struct tty_struct *tty,
 static int mos7810_check(struct usb_serial *serial)
 {
 	int i, pass_count = 0;
+	u8 *buf;
 	__u16 data = 0, mcr_data = 0;
 	__u16 test_pattern = 0x55AA;
+	int res;
+
+	buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (!buf)
+		return 0;	/* failed to identify 7810 */
 
 	/* Store MCR setting */
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 		MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
-		&mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		buf, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	if (res == VENDOR_READ_LENGTH)
+		mcr_data = *buf;
 
 	for (i = 0; i < 16; i++) {
 		/* Send the 1-bit test pattern out to MCS7810 test pin */
@@ -2158,9 +2166,12 @@ static int mos7810_check(struct usb_serial *serial)
 			MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
 
 		/* Read the test pattern back */
-		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		res = usb_control_msg(serial->dev,
+				usb_rcvctrlpipe(serial->dev, 0), MCS_RDREQ,
+				MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+				VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		if (res == VENDOR_READ_LENGTH)
+			data = *buf;
 
 		/* If this is a MCS7810 device, both test patterns must match */
 		if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
@@ -2174,6 +2185,8 @@ static int mos7810_check(struct usb_serial *serial)
 		MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
 		0, MOS_WDR_TIMEOUT);
 
+	kfree(buf);
+
 	if (pass_count == 16)
 		return 1;
 
@@ -2183,11 +2196,17 @@ static int mos7810_check(struct usb_serial *serial)
 static int mos7840_calc_num_ports(struct usb_serial *serial)
 {
 	__u16 data = 0x00;
+	u8 *buf;
 	int mos7840_num_ports;
 
-	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-		MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
-		VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
+	if (buf) {
+		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
+			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
+		data = *buf;
+		kfree(buf);
+	}
 
 	if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
 		serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {

drivers/usb/serial/option.c

@@ -250,13 +250,7 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_MF622			0x0001
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
-#define ZTE_PRODUCT_CDMA_TECH			0xfffe
-#define ZTE_PRODUCT_AC8710			0xfff1
-#define ZTE_PRODUCT_AC2726			0xfff5
-#define ZTE_PRODUCT_AC8710T			0xffff
 #define ZTE_PRODUCT_MC2718			0xffe8
-#define ZTE_PRODUCT_AD3812			0xffeb
-#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -495,18 +489,10 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.reserved = BIT(4),
 };
 
-static const struct option_blacklist_info zte_ad3812_z_blacklist = {
-	.sendsetup = BIT(0) | BIT(1) | BIT(2),
-};
-
 static const struct option_blacklist_info zte_mc2718_z_blacklist = {
 	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
 };
 
-static const struct option_blacklist_info zte_mc2716_z_blacklist = {
-	.sendsetup = BIT(1) | BIT(2) | BIT(3),
-};
-
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -593,6 +579,8 @@ static const struct usb_device_id option_ids[] = {
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff),	/* Huawei E1820 */
+		.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) },
@@ -797,7 +785,6 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_INTERFACE_CLASS(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_1012, 0xff) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
 	{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
-	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
 	{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6280) }, /* BP3-USB & BP3-EXT HSDPA */
@@ -1199,16 +1186,9 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t)&net_intf3_blacklist },
 
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	/* NOTE: most ZTE CDMA devices should be driven by zte_ev, not option */
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
 	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
-	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) },
 	{ USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) },

drivers/usb/serial/qcserial.c

@@ -118,6 +118,7 @@ static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
 	{USB_DEVICE(0x12D1, 0x14F0)},	/* Sony Gobi 3000 QDL */
 	{USB_DEVICE(0x12D1, 0x14F1)},	/* Sony Gobi 3000 Composite */
+	{USB_DEVICE(0x0AF0, 0x8120)},	/* Option GTM681W */
 
 	/* non Gobi Qualcomm serial devices */
 	{USB_DEVICE_INTERFACE_NUMBER(0x0f3d, 0x68a2, 0)},	/* Sierra Wireless MC7700 Device Management */

drivers/usb/serial/usb-serial.c

@@ -408,7 +408,7 @@ static int serial_ioctl(struct tty_struct *tty,
 					unsigned int cmd, unsigned long arg)
 {
 	struct usb_serial_port *port = tty->driver_data;
-	int retval = -ENODEV;
+	int retval = -ENOIOCTLCMD;
 
 	dev_dbg(tty->dev, "%s - cmd 0x%.4x\n", __func__, cmd);
 
@@ -420,8 +420,6 @@ static int serial_ioctl(struct tty_struct *tty,
 	default:
 		if (port->serial->type->ioctl)
 			retval = port->serial->type->ioctl(tty, cmd, arg);
-		else
-			retval = -ENOIOCTLCMD;
 	}
 
 	return retval;

drivers/usb/serial/visor.c

@@ -560,10 +560,19 @@ static int treo_attach(struct usb_serial *serial)
 	*/
 #define COPY_PORT(dest, src)						\
 	do { \
+		int i;							\
+									\
+		for (i = 0; i < ARRAY_SIZE(src->read_urbs); ++i) {	\
+			dest->read_urbs[i] = src->read_urbs[i];		\
+			dest->read_urbs[i]->context = dest;		\
+			dest->bulk_in_buffers[i] = src->bulk_in_buffers[i]; \
+		}							\
 		dest->read_urb = src->read_urb;				\
 		dest->bulk_in_endpointAddress = src->bulk_in_endpointAddress;\
 		dest->bulk_in_buffer = src->bulk_in_buffer;		\
+		dest->bulk_in_size = src->bulk_in_size;			\
 		dest->interrupt_in_urb = src->interrupt_in_urb;		\
+		dest->interrupt_in_urb->context = dest;			\
 		dest->interrupt_in_endpointAddress = \
 					src->interrupt_in_endpointAddress;\
 		dest->interrupt_in_buffer = src->interrupt_in_buffer;	\

drivers/usb/serial/whiteheat.c

@@ -649,7 +649,7 @@ static void firm_setup_port(struct tty_struct *tty)
 	struct whiteheat_port_settings port_settings;
 	unsigned int cflag = tty->termios.c_cflag;
 
-	port_settings.port = port->number + 1;
+	port_settings.port = port->number - port->serial->minor + 1;
 
 	/* get the byte size */
 	switch (cflag & CSIZE) {

drivers/usb/serial/zte_ev.c

@@ -41,9 +41,6 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	int len;
 	unsigned char *buf;
 
-	if (port->number != 0)
-		return -ENODEV;
-
 	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -53,7 +50,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0001, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send  2st cmd and recieve data */
@@ -65,7 +62,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 3 cmd */
@@ -84,7 +81,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 4 cmd */
@@ -95,7 +92,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send 5 cmd */
@@ -107,7 +104,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 6 cmd */
@@ -126,7 +123,7 @@ static int zte_ev_usb_serial_open(struct tty_struct *tty,
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 	kfree(buf);
 
@@ -166,9 +163,6 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	int len;
 	unsigned char *buf;
 
-	if (port->number != 0)
-		return;
-
 	buf = kmalloc(MAX_SETUP_DATA_SIZE, GFP_KERNEL);
 	if (!buf)
 		return;
@@ -178,7 +172,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0002, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send 2st ctl cmd(CTL    21 22 03 00  00 00 00 00 ) */
@@ -186,7 +180,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send  3st cmd and recieve data */
@@ -198,7 +192,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 4 cmd */
@@ -217,7 +211,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 5 cmd */
@@ -228,7 +222,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	/* send 6 cmd */
@@ -240,7 +234,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 				 0x21, 0xa1,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 7 cmd */
@@ -259,7 +253,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x20, 0x21,
 				 0x0000, 0x0000, buf, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	debug_data(dev, __func__, len, buf, result);
 
 	/* send 8 cmd */
@@ -270,7 +264,7 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 	result = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
 				 0x22, 0x21,
 				 0x0003, 0x0000, NULL, len,
-				 HZ * USB_CTRL_GET_TIMEOUT);
+				 USB_CTRL_GET_TIMEOUT);
 	dev_dbg(dev, "result = %d\n", result);
 
 	kfree(buf);
@@ -279,11 +273,29 @@ static void zte_ev_usb_serial_close(struct usb_serial_port *port)
 }
 
 static const struct usb_device_id id_table[] = {
-	{ USB_DEVICE(0x19d2, 0xffff) },	/* AC8700 */
-	{ USB_DEVICE(0x19d2, 0xfffe) },
-	{ USB_DEVICE(0x19d2, 0xfffd) }, /* MG880 */
+	/* AC8710, AC8710T */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffff, 0xff, 0xff, 0xff) },
+	 /* AC8700 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfffe, 0xff, 0xff, 0xff) },
+	/* MG880 */
+	{ USB_DEVICE(0x19d2, 0xfffd) },
+	{ USB_DEVICE(0x19d2, 0xfffc) },
+	{ USB_DEVICE(0x19d2, 0xfffb) },
+	/* AC2726, AC8710_V3 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xfff1, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(0x19d2, 0xfff6) },
+	{ USB_DEVICE(0x19d2, 0xfff7) },
+	{ USB_DEVICE(0x19d2, 0xfff8) },
+	{ USB_DEVICE(0x19d2, 0xfff9) },
+	{ USB_DEVICE(0x19d2, 0xffee) },
+	/* AC2716, MC2716 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffed, 0xff, 0xff, 0xff) },
+	/* AD3812 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x19d2, 0xffeb, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(0x19d2, 0xffec) },
 	{ USB_DEVICE(0x05C6, 0x3197) },
 	{ USB_DEVICE(0x05C6, 0x6000) },
+	{ USB_DEVICE(0x05C6, 0x9008) },
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

fs/xfs/xfs_acl.c

@@ -21,6 +21,8 @@
 #include "xfs_bmap_btree.h"
 #include "xfs_inode.h"
 #include "xfs_vnodeops.h"
+#include "xfs_sb.h"
+#include "xfs_mount.h"
 #include "xfs_trace.h"
 #include <linux/slab.h>
 #include <linux/xattr.h>
@@ -34,7 +36,9 @@
  */
 
 STATIC struct posix_acl *
-xfs_acl_from_disk(struct xfs_acl *aclp)
+xfs_acl_from_disk(
+	struct xfs_acl	*aclp,
+	int		max_entries)
 {
 	struct posix_acl_entry *acl_e;
 	struct posix_acl *acl;
@@ -42,7 +46,7 @@ xfs_acl_from_disk(struct xfs_acl *aclp)
 	unsigned int count, i;
 
 	count = be32_to_cpu(aclp->acl_cnt);
-	if (count > XFS_ACL_MAX_ENTRIES)
+	if (count > max_entries)
 		return ERR_PTR(-EFSCORRUPTED);
 
 	acl = posix_acl_alloc(count, GFP_KERNEL);
@@ -108,9 +112,9 @@ xfs_get_acl(struct inode *inode, int type)
 	struct xfs_inode *ip = XFS_I(inode);
 	struct posix_acl *acl;
 	struct xfs_acl *xfs_acl;
-	int len = sizeof(struct xfs_acl);
 	unsigned char *ea_name;
 	int error;
+	int len;
 
 	acl = get_cached_acl(inode, type);
 	if (acl != ACL_NOT_CACHED)
@@ -133,8 +137,8 @@ xfs_get_acl(struct inode *inode, int type)
 	 * If we have a cached ACLs value just return it, not need to
 	 * go out to the disk.
 	 */
-
-	xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+	len = XFS_ACL_MAX_SIZE(ip->i_mount);
+	xfs_acl = kzalloc(len, GFP_KERNEL);
 	if (!xfs_acl)
 		return ERR_PTR(-ENOMEM);
 
@@ -153,7 +157,7 @@ xfs_get_acl(struct inode *inode, int type)
 		goto out;
 	}
 
-	acl = xfs_acl_from_disk(xfs_acl);
+	acl = xfs_acl_from_disk(xfs_acl, XFS_ACL_MAX_ENTRIES(ip->i_mount));
 	if (IS_ERR(acl))
 		goto out;
 
@@ -189,16 +193,17 @@ xfs_set_acl(struct inode *inode, int type, struct posix_acl *acl)
 
 	if (acl) {
 		struct xfs_acl *xfs_acl;
-		int len;
+		int len = XFS_ACL_MAX_SIZE(ip->i_mount);
 
-		xfs_acl = kzalloc(sizeof(struct xfs_acl), GFP_KERNEL);
+		xfs_acl = kzalloc(len, GFP_KERNEL);
 		if (!xfs_acl)
 			return -ENOMEM;
 
 		xfs_acl_to_disk(xfs_acl, acl);
-		len = sizeof(struct xfs_acl) -
-			(sizeof(struct xfs_acl_entry) *
-			 (XFS_ACL_MAX_ENTRIES - acl->a_count));
+
+		/* subtract away the unused acl entries */
+		len -= sizeof(struct xfs_acl_entry) *
+			 (XFS_ACL_MAX_ENTRIES(ip->i_mount) - acl->a_count);
 
 		error = -xfs_attr_set(ip, ea_name, (unsigned char *)xfs_acl,
 				len, ATTR_ROOT);
@@ -243,7 +248,7 @@ xfs_set_mode(struct inode *inode, umode_t mode)
 static int
 xfs_acl_exists(struct inode *inode, unsigned char *name)
 {
-	int len = sizeof(struct xfs_acl);
+	int len = XFS_ACL_MAX_SIZE(XFS_M(inode->i_sb));
 
 	return (xfs_attr_get(XFS_I(inode), name, NULL, &len,
 			    ATTR_ROOT|ATTR_KERNOVAL) == 0);
@@ -379,7 +384,7 @@ xfs_xattr_acl_set(struct dentry *dentry, const char *name,
 		goto out_release;
 
 	error = -EINVAL;
-	if (acl->a_count > XFS_ACL_MAX_ENTRIES)
+	if (acl->a_count > XFS_ACL_MAX_ENTRIES(XFS_M(inode->i_sb)))
 		goto out_release;
 
 	if (type == ACL_TYPE_ACCESS) {

fs/xfs/xfs_acl.h

@@ -22,19 +22,36 @@ struct inode;
 struct posix_acl;
 struct xfs_inode;
 
-#define XFS_ACL_MAX_ENTRIES 25
 #define XFS_ACL_NOT_PRESENT (-1)
 
 /* On-disk XFS access control list structure */
+struct xfs_acl_entry {
+	__be32	ae_tag;
+	__be32	ae_id;
+	__be16	ae_perm;
+	__be16	ae_pad;		/* fill the implicit hole in the structure */
+};
+
 struct xfs_acl {
-	__be32		acl_cnt;
-	struct xfs_acl_entry {
-		__be32	ae_tag;
-		__be32	ae_id;
-		__be16	ae_perm;
-	} acl_entry[XFS_ACL_MAX_ENTRIES];
+	__be32			acl_cnt;
+	struct xfs_acl_entry	acl_entry[0];
 };
 
+/*
+ * The number of ACL entries allowed is defined by the on-disk format.
+ * For v4 superblocks, that is limited to 25 entries. For v5 superblocks, it is
+ * limited only by the maximum size of the xattr that stores the information.
+ */
+#define XFS_ACL_MAX_ENTRIES(mp)	\
+	(xfs_sb_version_hascrc(&mp->m_sb) \
+		?  (XATTR_SIZE_MAX - sizeof(struct xfs_acl)) / \
+						sizeof(struct xfs_acl_entry) \
+		: 25)
+
+#define XFS_ACL_MAX_SIZE(mp) \
+	(sizeof(struct xfs_acl) + \
+		sizeof(struct xfs_acl_entry) * XFS_ACL_MAX_ENTRIES((mp)))
+
 /* On-disk XFS extended attribute names */
 #define SGI_ACL_FILE		(unsigned char *)"SGI_ACL_FILE"
 #define SGI_ACL_DEFAULT		(unsigned char *)"SGI_ACL_DEFAULT"

fs/xfs/xfs_attr_leaf.c

@@ -3258,7 +3258,7 @@ xfs_attr3_leaf_inactive(
 			name_rmt = xfs_attr3_leaf_name_remote(leaf, i);
 			if (name_rmt->valueblk) {
 				lp->valueblk = be32_to_cpu(name_rmt->valueblk);
-				lp->valuelen = XFS_B_TO_FSB(dp->i_mount,
+				lp->valuelen = xfs_attr3_rmt_blocks(dp->i_mount,
 						    be32_to_cpu(name_rmt->valuelen));
 				lp++;
 			}

fs/xfs/xfs_dquot.c

@@ -249,8 +249,11 @@ xfs_qm_init_dquot_blk(
 		d->dd_diskdq.d_version = XFS_DQUOT_VERSION;
 		d->dd_diskdq.d_id = cpu_to_be32(curid);
 		d->dd_diskdq.d_flags = type;
-		if (xfs_sb_version_hascrc(&mp->m_sb))
+		if (xfs_sb_version_hascrc(&mp->m_sb)) {
 			uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid);
+			xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk),
+					 XFS_DQUOT_CRC_OFF);
+		}
 	}
 
 	xfs_trans_dquot_buf(tp, bp,
@@ -286,23 +289,6 @@ xfs_dquot_set_prealloc_limits(struct xfs_dquot *dqp)
 	dqp->q_low_space[XFS_QLOWSP_5_PCNT] = space * 5;
 }
 
-STATIC void
-xfs_dquot_buf_calc_crc(
-	struct xfs_mount	*mp,
-	struct xfs_buf		*bp)
-{
-	struct xfs_dqblk	*d = (struct xfs_dqblk *)bp->b_addr;
-	int			i;
-
-	if (!xfs_sb_version_hascrc(&mp->m_sb))
-		return;
-
-	for (i = 0; i < mp->m_quotainfo->qi_dqperchunk; i++, d++) {
-		xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk),
-				 offsetof(struct xfs_dqblk, dd_crc));
-	}
-}
-
 STATIC bool
 xfs_dquot_buf_verify_crc(
 	struct xfs_mount	*mp,
@@ -328,12 +314,11 @@ xfs_dquot_buf_verify_crc(
 
 	for (i = 0; i < ndquots; i++, d++) {
 		if (!xfs_verify_cksum((char *)d, sizeof(struct xfs_dqblk),
-				 offsetof(struct xfs_dqblk, dd_crc)))
+				 XFS_DQUOT_CRC_OFF))
 			return false;
 		if (!uuid_equal(&d->dd_uuid, &mp->m_sb.sb_uuid))
 			return false;
 	}
-
 	return true;
 }
 
@@ -393,6 +378,11 @@ xfs_dquot_buf_read_verify(
 	}
 }
 
+/*
+ * we don't calculate the CRC here as that is done when the dquot is flushed to
+ * the buffer after the update is done. This ensures that the dquot in the
+ * buffer always has an up-to-date CRC value.
+ */
 void
 xfs_dquot_buf_write_verify(
 	struct xfs_buf	*bp)
@@ -404,7 +394,6 @@ xfs_dquot_buf_write_verify(
 		xfs_buf_ioerror(bp, EFSCORRUPTED);
 		return;
 	}
-	xfs_dquot_buf_calc_crc(mp, bp);
 }
 
 const struct xfs_buf_ops xfs_dquot_buf_ops = {
@@ -1151,11 +1140,17 @@ xfs_qm_dqflush(
 	 * copy the lsn into the on-disk dquot now while we have the in memory
 	 * dquot here. This can't be done later in the write verifier as we
 	 * can't get access to the log item at that point in time.
+	 *
+	 * We also calculate the CRC here so that the on-disk dquot in the
+	 * buffer always has a valid CRC. This ensures there is no possibility
+	 * of a dquot without an up-to-date CRC getting to disk.
 	 */
 	if (xfs_sb_version_hascrc(&mp->m_sb)) {
 		struct xfs_dqblk *dqb = (struct xfs_dqblk *)ddqp;
 
 		dqb->dd_lsn = cpu_to_be64(dqp->q_logitem.qli_item.li_lsn);
+		xfs_update_cksum((char *)dqb, sizeof(struct xfs_dqblk),
+				 XFS_DQUOT_CRC_OFF);
 	}
 
 	/*

fs/xfs/xfs_inode.c

@@ -1638,6 +1638,10 @@ xfs_iunlink(
 		dip->di_next_unlinked = agi->agi_unlinked[bucket_index];
 		offset = ip->i_imap.im_boffset +
 			offsetof(xfs_dinode_t, di_next_unlinked);
+
+		/* need to recalc the inode CRC if appropriate */
+		xfs_dinode_calc_crc(mp, dip);
+
 		xfs_trans_inode_buf(tp, ibp);
 		xfs_trans_log_buf(tp, ibp, offset,
 				  (offset + sizeof(xfs_agino_t) - 1));
@@ -1723,6 +1727,10 @@ xfs_iunlink_remove(
 			dip->di_next_unlinked = cpu_to_be32(NULLAGINO);
 			offset = ip->i_imap.im_boffset +
 				offsetof(xfs_dinode_t, di_next_unlinked);
+
+			/* need to recalc the inode CRC if appropriate */
+			xfs_dinode_calc_crc(mp, dip);
+
 			xfs_trans_inode_buf(tp, ibp);
 			xfs_trans_log_buf(tp, ibp, offset,
 					  (offset + sizeof(xfs_agino_t) - 1));
@@ -1796,6 +1804,10 @@ xfs_iunlink_remove(
 			dip->di_next_unlinked = cpu_to_be32(NULLAGINO);
 			offset = ip->i_imap.im_boffset +
 				offsetof(xfs_dinode_t, di_next_unlinked);
+
+			/* need to recalc the inode CRC if appropriate */
+			xfs_dinode_calc_crc(mp, dip);
+
 			xfs_trans_inode_buf(tp, ibp);
 			xfs_trans_log_buf(tp, ibp, offset,
 					  (offset + sizeof(xfs_agino_t) - 1));
@@ -1809,6 +1821,10 @@ xfs_iunlink_remove(
 		last_dip->di_next_unlinked = cpu_to_be32(next_agino);
 		ASSERT(next_agino != 0);
 		offset = last_offset + offsetof(xfs_dinode_t, di_next_unlinked);
+
+		/* need to recalc the inode CRC if appropriate */
+		xfs_dinode_calc_crc(mp, last_dip);
+
 		xfs_trans_inode_buf(tp, last_ibp);
 		xfs_trans_log_buf(tp, last_ibp, offset,
 				  (offset + sizeof(xfs_agino_t) - 1));

fs/xfs/xfs_log_recover.c

@@ -1599,10 +1599,43 @@ xlog_recover_add_to_trans(
 }
 
 /*
- * Sort the log items in the transaction. Cancelled buffers need
- * to be put first so they are processed before any items that might
- * modify the buffers. If they are cancelled, then the modifications
- * don't need to be replayed.
+ * Sort the log items in the transaction.
+ *
+ * The ordering constraints are defined by the inode allocation and unlink
+ * behaviour. The rules are:
+ *
+ *	1. Every item is only logged once in a given transaction. Hence it
+ *	   represents the last logged state of the item. Hence ordering is
+ *	   dependent on the order in which operations need to be performed so
+ *	   required initial conditions are always met.
+ *
+ *	2. Cancelled buffers are recorded in pass 1 in a separate table and
+ *	   there's nothing to replay from them so we can simply cull them
+ *	   from the transaction. However, we can't do that until after we've
+ *	   replayed all the other items because they may be dependent on the
+ *	   cancelled buffer and replaying the cancelled buffer can remove it
+ *	   form the cancelled buffer table. Hence they have tobe done last.
+ *
+ *	3. Inode allocation buffers must be replayed before inode items that
+ *	   read the buffer and replay changes into it.
+ *
+ *	4. Inode unlink buffers must be replayed after inode items are replayed.
+ *	   This ensures that inodes are completely flushed to the inode buffer
+ *	   in a "free" state before we remove the unlinked inode list pointer.
+ *
+ * Hence the ordering needs to be inode allocation buffers first, inode items
+ * second, inode unlink buffers third and cancelled buffers last.
+ *
+ * But there's a problem with that - we can't tell an inode allocation buffer
+ * apart from a regular buffer, so we can't separate them. We can, however,
+ * tell an inode unlink buffer from the others, and so we can separate them out
+ * from all the other buffers and move them to last.
+ *
+ * Hence, 4 lists, in order from head to tail:
+ * 	- buffer_list for all buffers except cancelled/inode unlink buffers
+ * 	- item_list for all non-buffer items
+ * 	- inode_buffer_list for inode unlink buffers
+ * 	- cancel_list for the cancelled buffers
  */
 STATIC int
 xlog_recover_reorder_trans(
@@ -1612,6 +1645,10 @@ xlog_recover_reorder_trans(
 {
 	xlog_recover_item_t	*item, *n;
 	LIST_HEAD(sort_list);
+	LIST_HEAD(cancel_list);
+	LIST_HEAD(buffer_list);
+	LIST_HEAD(inode_buffer_list);
+	LIST_HEAD(inode_list);
 
 	list_splice_init(&trans->r_itemq, &sort_list);
 	list_for_each_entry_safe(item, n, &sort_list, ri_list) {
@@ -1619,12 +1656,18 @@ xlog_recover_reorder_trans(
 
 		switch (ITEM_TYPE(item)) {
 		case XFS_LI_BUF:
-			if (!(buf_f->blf_flags & XFS_BLF_CANCEL)) {
+			if (buf_f->blf_flags & XFS_BLF_CANCEL) {
 				trace_xfs_log_recover_item_reorder_head(log,
 							trans, item, pass);
-				list_move(&item->ri_list, &trans->r_itemq);
+				list_move(&item->ri_list, &cancel_list);
+				break;
+			}
+			if (buf_f->blf_flags & XFS_BLF_INODE_BUF) {
+				list_move(&item->ri_list, &inode_buffer_list);
 				break;
 			}
+			list_move_tail(&item->ri_list, &buffer_list);
+			break;
 		case XFS_LI_INODE:
 		case XFS_LI_DQUOT:
 		case XFS_LI_QUOTAOFF:
@@ -1632,7 +1675,7 @@ xlog_recover_reorder_trans(
 		case XFS_LI_EFI:
 			trace_xfs_log_recover_item_reorder_tail(log,
 							trans, item, pass);
-			list_move_tail(&item->ri_list, &trans->r_itemq);
+			list_move_tail(&item->ri_list, &inode_list);
 			break;
 		default:
 			xfs_warn(log->l_mp,
@@ -1643,6 +1686,14 @@ xlog_recover_reorder_trans(
 		}
 	}
 	ASSERT(list_empty(&sort_list));
+	if (!list_empty(&buffer_list))
+		list_splice(&buffer_list, &trans->r_itemq);
+	if (!list_empty(&inode_list))
+		list_splice_tail(&inode_list, &trans->r_itemq);
+	if (!list_empty(&inode_buffer_list))
+		list_splice_tail(&inode_buffer_list, &trans->r_itemq);
+	if (!list_empty(&cancel_list))
+		list_splice_tail(&cancel_list, &trans->r_itemq);
 	return 0;
 }
 
@@ -1861,6 +1912,15 @@ xlog_recover_do_inode_buffer(
 		buffer_nextp = (xfs_agino_t *)xfs_buf_offset(bp,
 					      next_unlinked_offset);
 		*buffer_nextp = *logged_nextp;
+
+		/*
+		 * If necessary, recalculate the CRC in the on-disk inode. We
+		 * have to leave the inode in a consistent state for whoever
+		 * reads it next....
+		 */
+		xfs_dinode_calc_crc(mp, (struct xfs_dinode *)
+				xfs_buf_offset(bp, i * mp->m_sb.sb_inodesize));
+
 	}
 
 	return 0;
@@ -2266,6 +2326,12 @@ xfs_qm_dqcheck(
 	d->dd_diskdq.d_flags = type;
 	d->dd_diskdq.d_id = cpu_to_be32(id);
 
+	if (xfs_sb_version_hascrc(&mp->m_sb)) {
+		uuid_copy(&d->dd_uuid, &mp->m_sb.sb_uuid);
+		xfs_update_cksum((char *)d, sizeof(struct xfs_dqblk),
+				 XFS_DQUOT_CRC_OFF);
+	}
+
 	return errs;
 }
 
@@ -2793,6 +2859,10 @@ xlog_recover_dquot_pass2(
 	}
 
 	memcpy(ddq, recddq, item->ri_buf[1].i_len);
+	if (xfs_sb_version_hascrc(&mp->m_sb)) {
+		xfs_update_cksum((char *)ddq, sizeof(struct xfs_dqblk),
+				 XFS_DQUOT_CRC_OFF);
+	}
 
 	ASSERT(dq_f->qlf_size == 2);
 	ASSERT(bp->b_target->bt_mount == mp);

fs/xfs/xfs_qm.c

@@ -41,6 +41,7 @@
 #include "xfs_qm.h"
 #include "xfs_trace.h"
 #include "xfs_icache.h"
+#include "xfs_cksum.h"
 
 /*
  * The global quota manager. There is only one of these for the entire
@@ -839,7 +840,7 @@ xfs_qm_reset_dqcounts(
 	xfs_dqid_t	id,
 	uint		type)
 {
-	xfs_disk_dquot_t	*ddq;
+	struct xfs_dqblk	*dqb;
 	int			j;
 
 	trace_xfs_reset_dqcounts(bp, _RET_IP_);
@@ -853,8 +854,12 @@ xfs_qm_reset_dqcounts(
 	do_div(j, sizeof(xfs_dqblk_t));
 	ASSERT(mp->m_quotainfo->qi_dqperchunk == j);
 #endif
-	ddq = bp->b_addr;
+	dqb = bp->b_addr;
 	for (j = 0; j < mp->m_quotainfo->qi_dqperchunk; j++) {
+		struct xfs_disk_dquot	*ddq;
+
+		ddq = (struct xfs_disk_dquot *)&dqb[j];
+
 		/*
 		 * Do a sanity check, and if needed, repair the dqblk. Don't
 		 * output any warnings because it's perfectly possible to
@@ -871,7 +876,12 @@ xfs_qm_reset_dqcounts(
 		ddq->d_bwarns = 0;
 		ddq->d_iwarns = 0;
 		ddq->d_rtbwarns = 0;
-		ddq = (xfs_disk_dquot_t *) ((xfs_dqblk_t *)ddq + 1);
+
+		if (xfs_sb_version_hascrc(&mp->m_sb)) {
+			xfs_update_cksum((char *)&dqb[j],
+					 sizeof(struct xfs_dqblk),
+					 XFS_DQUOT_CRC_OFF);
+		}
 	}
 }
 
@@ -907,19 +917,29 @@ xfs_qm_dqiter_bufs(
 			      XFS_FSB_TO_DADDR(mp, bno),
 			      mp->m_quotainfo->qi_dqchunklen, 0, &bp,
 			      &xfs_dquot_buf_ops);
-		if (error)
-			break;
 
 		/*
-		 * XXX(hch): need to figure out if it makes sense to validate
-		 *	     the CRC here.
+		 * CRC and validation errors will return a EFSCORRUPTED here. If
+		 * this occurs, re-read without CRC validation so that we can
+		 * repair the damage via xfs_qm_reset_dqcounts(). This process
+		 * will leave a trace in the log indicating corruption has
+		 * been detected.
 		 */
+		if (error == EFSCORRUPTED) {
+			error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
+				      XFS_FSB_TO_DADDR(mp, bno),
+				      mp->m_quotainfo->qi_dqchunklen, 0, &bp,
+				      NULL);
+		}
+
+		if (error)
+			break;
+
 		xfs_qm_reset_dqcounts(mp, bp, firstid, type);
 		xfs_buf_delwri_queue(bp, buffer_list);
 		xfs_buf_relse(bp);
-		/*
-		 * goto the next block.
-		 */
+
+		/* goto the next block. */
 		bno++;
 		firstid += mp->m_quotainfo->qi_dqperchunk;
 	}

fs/xfs/xfs_quota.h

@@ -87,6 +87,8 @@ typedef struct xfs_dqblk {
 	uuid_t		  dd_uuid;	/* location information */
 } xfs_dqblk_t;
 
+#define XFS_DQUOT_CRC_OFF	offsetof(struct xfs_dqblk, dd_crc)
+
 /*
  * flags for q_flags field in the dquot.
  */

fs/xfs/xfs_super.c

@@ -1372,6 +1372,17 @@ xfs_finish_flags(
 		}
 	}
 
+	/*
+	 * V5 filesystems always use attr2 format for attributes.
+	 */
+	if (xfs_sb_version_hascrc(&mp->m_sb) &&
+	    (mp->m_flags & XFS_MOUNT_NOATTR2)) {
+		xfs_warn(mp,
+"Cannot mount a V5 filesystem as %s. %s is always enabled for V5 filesystems.",
+			MNTOPT_NOATTR2, MNTOPT_ATTR2);
+		return XFS_ERROR(EINVAL);
+	}
+
 	/*
 	 * mkfs'ed attr2 will turn on attr2 mount unless explicitly
 	 * told by noattr2 to turn it off

include/asm-generic/tlb.h

@@ -97,11 +97,9 @@ struct mmu_gather {
 	unsigned long		start;
 	unsigned long		end;
 	unsigned int		need_flush : 1,	/* Did free PTEs */
-				fast_mode  : 1; /* No batching   */
-
 	/* we are in the middle of an operation to clear
 	 * a full mm and can make some optimizations */
-	unsigned int		fullmm : 1,
+				fullmm : 1,
 	/* we have performed an operation which
 	 * requires a complete flush of the tlb */
 				need_flush_all : 1;
@@ -114,19 +112,6 @@ struct mmu_gather {
 
 #define HAVE_GENERIC_MMU_GATHER
 
-static inline int tlb_fast_mode(struct mmu_gather *tlb)
-{
-#ifdef CONFIG_SMP
-	return tlb->fast_mode;
-#else
-	/*
-	 * For UP we don't need to worry about TLB flush
-	 * and page free order so much..
-	 */
-	return 1;
-#endif
-}
-
 void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm);
 void tlb_flush_mmu(struct mmu_gather *tlb);
 void tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start,

include/linux/socket.h

@@ -320,6 +320,9 @@ extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
 
 struct timespec;
 
+/* The __sys_...msg variants allow MSG_CMSG_COMPAT */
+extern long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
+extern long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags);
 extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 			  unsigned int flags, struct timespec *timeout);
 extern int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg,

mm/memory.c

@@ -220,7 +220,6 @@ void tlb_gather_mmu(struct mmu_gather *tlb, struct mm_struct *mm, bool fullmm)
 	tlb->start	= -1UL;
 	tlb->end	= 0;
 	tlb->need_flush = 0;
-	tlb->fast_mode  = (num_possible_cpus() == 1);
 	tlb->local.next = NULL;
 	tlb->local.nr   = 0;
 	tlb->local.max  = ARRAY_SIZE(tlb->__pages);
@@ -244,9 +243,6 @@ void tlb_flush_mmu(struct mmu_gather *tlb)
 	tlb_table_flush(tlb);
 #endif
 
-	if (tlb_fast_mode(tlb))
-		return;
-
 	for (batch = &tlb->local; batch; batch = batch->next) {
 		free_pages_and_swap_cache(batch->pages, batch->nr);
 		batch->nr = 0;
@@ -288,11 +284,6 @@ int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 
 	VM_BUG_ON(!tlb->need_flush);
 
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return 1; /* avoid calling tlb_flush_mmu() */
-	}
-
 	batch = tlb->active;
 	batch->pages[batch->nr++] = page;
 	if (batch->nr == batch->max) {

net/compat.c

@@ -734,19 +734,25 @@ static unsigned char nas[21] = {
 
 asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
 {
-	return sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
+	if (flags & MSG_CMSG_COMPAT)
+		return -EINVAL;
+	return __sys_sendmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
 }
 
 asmlinkage long compat_sys_sendmmsg(int fd, struct compat_mmsghdr __user *mmsg,
 				    unsigned int vlen, unsigned int flags)
 {
+	if (flags & MSG_CMSG_COMPAT)
+		return -EINVAL;
 	return __sys_sendmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
 			      flags | MSG_CMSG_COMPAT);
 }
 
 asmlinkage long compat_sys_recvmsg(int fd, struct compat_msghdr __user *msg, unsigned int flags)
 {
-	return sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
+	if (flags & MSG_CMSG_COMPAT)
+		return -EINVAL;
+	return __sys_recvmsg(fd, (struct msghdr __user *)msg, flags | MSG_CMSG_COMPAT);
 }
 
 asmlinkage long compat_sys_recv(int fd, void __user *buf, size_t len, unsigned int flags)
@@ -768,6 +774,9 @@ asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
 	int datagrams;
 	struct timespec ktspec;
 
+	if (flags & MSG_CMSG_COMPAT)
+		return -EINVAL;
+
 	if (COMPAT_USE_64BIT_TIME)
 		return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
 				      flags | MSG_CMSG_COMPAT,

net/socket.c

@@ -1956,7 +1956,7 @@ struct used_address {
 	unsigned int name_len;
 };
 
-static int __sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
+static int ___sys_sendmsg(struct socket *sock, struct msghdr __user *msg,
 			 struct msghdr *msg_sys, unsigned int flags,
 			 struct used_address *used_address)
 {
@@ -2071,26 +2071,30 @@ out:
  *	BSD sendmsg interface
  */
 
-SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags)
+long __sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
 {
 	int fput_needed, err;
 	struct msghdr msg_sys;
 	struct socket *sock;
 
-	if (flags & MSG_CMSG_COMPAT)
-		return -EINVAL;
-
 	sock = sockfd_lookup_light(fd, &err, &fput_needed);
 	if (!sock)
 		goto out;
 
-	err = __sys_sendmsg(sock, msg, &msg_sys, flags, NULL);
+	err = ___sys_sendmsg(sock, msg, &msg_sys, flags, NULL);
 
 	fput_light(sock->file, fput_needed);
 out:
 	return err;
 }
 
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned int, flags)
+{
+	if (flags & MSG_CMSG_COMPAT)
+		return -EINVAL;
+	return __sys_sendmsg(fd, msg, flags);
+}
+
 /*
  *	Linux sendmmsg interface
  */
@@ -2121,15 +2125,16 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 
 	while (datagrams < vlen) {
 		if (MSG_CMSG_COMPAT & flags) {
-			err = __sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
-					    &msg_sys, flags, &used_address);
+			err = ___sys_sendmsg(sock, (struct msghdr __user *)compat_entry,
+					     &msg_sys, flags, &used_address);
 			if (err < 0)
 				break;
 			err = __put_user(err, &compat_entry->msg_len);
 			++compat_entry;
 		} else {
-			err = __sys_sendmsg(sock, (struct msghdr __user *)entry,
-					    &msg_sys, flags, &used_address);
+			err = ___sys_sendmsg(sock,
+					     (struct msghdr __user *)entry,
+					     &msg_sys, flags, &used_address);
 			if (err < 0)
 				break;
 			err = put_user(err, &entry->msg_len);
@@ -2158,7 +2163,7 @@ SYSCALL_DEFINE4(sendmmsg, int, fd, struct mmsghdr __user *, mmsg,
 	return __sys_sendmmsg(fd, mmsg, vlen, flags);
 }
 
-static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
+static int ___sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
 			 struct msghdr *msg_sys, unsigned int flags, int nosec)
 {
 	struct compat_msghdr __user *msg_compat =
@@ -2250,27 +2255,31 @@ out:
  *	BSD recvmsg interface
  */
 
-SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
-		unsigned int, flags)
+long __sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags)
 {
 	int fput_needed, err;
 	struct msghdr msg_sys;
 	struct socket *sock;
 
-	if (flags & MSG_CMSG_COMPAT)
-		return -EINVAL;
-
 	sock = sockfd_lookup_light(fd, &err, &fput_needed);
 	if (!sock)
 		goto out;
 
-	err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0);
+	err = ___sys_recvmsg(sock, msg, &msg_sys, flags, 0);
 
 	fput_light(sock->file, fput_needed);
 out:
 	return err;
 }
 
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+		unsigned int, flags)
+{
+	if (flags & MSG_CMSG_COMPAT)
+		return -EINVAL;
+	return __sys_recvmsg(fd, msg, flags);
+}
+
 /*
  *     Linux recvmmsg interface
  */
@@ -2308,17 +2317,18 @@ int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
 		 * No need to ask LSM for more than the first datagram.
 		 */
 		if (MSG_CMSG_COMPAT & flags) {
-			err = __sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
-					    &msg_sys, flags & ~MSG_WAITFORONE,
-					    datagrams);
+			err = ___sys_recvmsg(sock, (struct msghdr __user *)compat_entry,
+					     &msg_sys, flags & ~MSG_WAITFORONE,
+					     datagrams);
 			if (err < 0)
 				break;
 			err = __put_user(err, &compat_entry->msg_len);
 			++compat_entry;
 		} else {
-			err = __sys_recvmsg(sock, (struct msghdr __user *)entry,
-					    &msg_sys, flags & ~MSG_WAITFORONE,
-					    datagrams);
+			err = ___sys_recvmsg(sock,
+					     (struct msghdr __user *)entry,
+					     &msg_sys, flags & ~MSG_WAITFORONE,
+					     datagrams);
 			if (err < 0)
 				break;
 			err = put_user(err, &entry->msg_len);
@@ -2505,31 +2515,15 @@ SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 				   (int __user *)a[4]);
 		break;
 	case SYS_SENDMSG:
-		if (a[2] & MSG_CMSG_COMPAT) {
-			err = -EINVAL;
-			break;
-		}
 		err = sys_sendmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
 	case SYS_SENDMMSG:
-		if (a[3] & MSG_CMSG_COMPAT) {
-			err = -EINVAL;
-			break;
-		}
 		err = sys_sendmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3]);
 		break;
 	case SYS_RECVMSG:
-		if (a[2] & MSG_CMSG_COMPAT) {
-			err = -EINVAL;
-			break;
-		}
 		err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
 	case SYS_RECVMMSG:
-		if (a[3] & MSG_CMSG_COMPAT) {
-			err = -EINVAL;
-			break;
-		}
 		err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3],
 				   (struct timespec __user *)a[4]);
 		break;

scripts/Makefile.lib

@@ -264,7 +264,7 @@ $(obj)/%.dtb.S: $(obj)/%.dtb
 quiet_cmd_dtc = DTC     $@
 cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
 	$(objtree)/scripts/dtc/dtc -O dtb -o $@ -b 0 \
-		-i $(srctree)/arch/$(SRCARCH)/boot/dts $(DTC_FLAGS) \
+		-i $(dir $<) $(DTC_FLAGS) \
 		-d $(depfile).dtc $(dtc-tmp) ; \
 	cat $(depfile).pre $(depfile).dtc > $(depfile)
 

scripts/config

@@ -105,7 +105,7 @@ while [ "$1" != "" ] ; do
 		;;
 	--refresh)
 		;;
-	--*-after)
+	--*-after|-E|-D|-M)
 		checkarg "$1"
 		A=$ARG
 		checkarg "$2"

scripts/kconfig/lxdialog/menubox.c

@@ -303,10 +303,11 @@ do_resize:
 				}
 		}
 
-		if (i < max_choice ||
-		    key == KEY_UP || key == KEY_DOWN ||
-		    key == '-' || key == '+' ||
-		    key == KEY_PPAGE || key == KEY_NPAGE) {
+		if (item_count() != 0 &&
+		    (i < max_choice ||
+		     key == KEY_UP || key == KEY_DOWN ||
+		     key == '-' || key == '+' ||
+		     key == KEY_PPAGE || key == KEY_NPAGE)) {
 			/* Remove highligt of current item */
 			print_item(scroll + choice, choice, FALSE);
 

scripts/kconfig/mconf.c

@@ -670,11 +670,12 @@ static void conf(struct menu *menu, struct menu *active_menu)
 				  active_menu, &s_scroll);
 		if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL)
 			break;
-		if (!item_activate_selected())
-			continue;
-		if (!item_tag())
-			continue;
-
+		if (item_count() != 0) {
+			if (!item_activate_selected())
+				continue;
+			if (!item_tag())
+				continue;
+		}
 		submenu = item_data();
 		active_menu = item_data();
 		if (submenu)

scripts/kconfig/menu.c

@@ -146,11 +146,24 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e
 			struct menu *menu = current_entry;
 
 			while ((menu = menu->parent) != NULL) {
+				struct expr *dup_expr;
+
 				if (!menu->visibility)
 					continue;
+				/*
+				 * Do not add a reference to the
+				 * menu's visibility expression but
+				 * use a copy of it.  Otherwise the
+				 * expression reduction functions
+				 * will modify expressions that have
+				 * multiple references which can
+				 * cause unwanted side effects.
+				 */
+				dup_expr = expr_copy(menu->visibility);
+
 				prop->visible.expr
 					= expr_alloc_and(prop->visible.expr,
-							 menu->visibility);
+							 dup_expr);
 			}
 		}