staging: rtl8192u: Fix typo in staging/rtl8192u

Correct spelling typo in staging/rtl8192u

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8192u/ieee80211/ieee80211.h

@@ -2114,7 +2114,7 @@ struct ieee80211_device {
                                   struct ieee80211_network * network, u16 type);
         int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
 
-	/* Softmac-generated frames (mamagement) are TXed via this
+	/* Softmac-generated frames (management) are TXed via this
 	 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
 	 * not set. As some cards may have different HW queues that
 	 * one might want to use for data and management frames
@@ -2192,7 +2192,7 @@ struct ieee80211_device {
 	int (*handle_assoc_response) (struct net_device * dev, struct ieee80211_assoc_response_frame * resp, struct ieee80211_network * network);
 
 
-	/* check whether Tx hw resouce available */
+	/* check whether Tx hw resource available */
 	short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
 	//added by wb for HT related
 //	void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);

drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c

@@ -1448,7 +1448,7 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
 			( apset && apmatch &&
 				((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
 			/* if the ap is not set, check that the user set the bssid
-			 * and the network does bradcast and that those two bssid matches
+			 * and the network does broadcast and that those two bssid matches
 			 */
 			(!apset && ssidset && ssidbroad && ssidmatch)
 			){
@@ -2520,7 +2520,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work)
 
 	/* until we do not set the state to IEEE80211_NOLINK
 	* there are no possibility to have someone else trying
-	* to start an association procdure (we get here with
+	* to start an association procedure (we get here with
 	* ieee->state = IEEE80211_ASSOCIATING).
 	* When we set the state to IEEE80211_NOLINK it is possible
 	* that the RX path run an attempt to associate, but

drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c

@@ -1,6 +1,6 @@
 /********************************************************************************************************************************
  * This file is created to process BA Action Frame. According to 802.11 spec, there are 3 BA action types at all. And as BA is
- * related to TS, this part need some struture defined in QOS side code. Also TX RX is going to be resturctured, so how to send
+ * related to TS, this part need some structure defined in QOS side code. Also TX RX is going to be resturctured, so how to send
  * ADDBAREQ ADDBARSP and DELBA packet is still on consideration. Temporarily use MANAGE QUEUE instead of Normal Queue.
  * WB 2008-05-27
  * *****************************************************************************************************************************/

drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h

@@ -15,7 +15,7 @@
 #define HT_OPMODE_MIXED			3
 
 //
-// MIMO Power Save Setings
+// MIMO Power Save Settings
 //
 #define MIMO_PS_STATIC				0
 #define MIMO_PS_DYNAMIC			1
@@ -242,7 +242,7 @@ typedef struct _RT_HIGH_THROUGHPUT{
 	u8				bEnableHT;
 	u8				bCurrentHTSupport;
 
-	u8				bRegBW40MHz;				// Tx 40MHz channel capablity
+	u8				bRegBW40MHz;				// Tx 40MHz channel capability
 	u8				bCurBW40MHz;				// Tx 40MHz channel capability
 
 	u8				bRegShortGI40MHz;			// Tx Short GI for 40Mhz

drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c

@@ -912,7 +912,7 @@ u8 HTFilterMCSRate( struct ieee80211_device* ieee, u8* pSupportMCS, u8* pOperate
 
 	u8 i=0;
 
-	// filter out operational rate set not supported by AP, the lenth of it is 16
+	// filter out operational rate set not supported by AP, the length of it is 16
 	for(i=0;i<=15;i++){
 		pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
 	}

drivers/staging/rtl8192u/r819xU_HTType.h

@@ -16,7 +16,7 @@
 #define HT_OPMODE_MIXED			3
 
 //
-// MIMO Power Save Setings
+// MIMO Power Save Settings
 //
 #define MIMO_PS_STATIC				0
 #define MIMO_PS_DYNAMIC			1

drivers/staging/rtl8192u/r819xU_phyreg.h

@@ -443,7 +443,7 @@
 #define bCCKRxIG                  			0x7f00
 #define bCCKLNAPolarity           		0x800000
 #define bCCKRx1stGain             		0x7f0000
-#define bCCKRFExtend              		0x20000000 //CCK Rx inital gain polarity
+#define bCCKRFExtend              		0x20000000 //CCK Rx initial gain polarity
 #define bCCKRxAGCSatLevel        		0x1f000000
 #define bCCKRxAGCSatCount       		0xe0
 #define bCCKRxRFSettle            		0x1f       //AGCsamp_dly