module_param: make bool parameters really bool (drivers & misc)

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

drivers/accessibility/braille/braille_console.c

@@ -44,7 +44,7 @@ MODULE_LICENSE("GPL");
  */
 
 /* Emit various sounds */
-static int sound;
+static bool sound;
 module_param(sound, bool, 0);
 MODULE_PARM_DESC(sound, "emit sounds");
 

drivers/acpi/acpica/acglobal.h

@@ -108,7 +108,7 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_use_default_register_widths, TRUE);
 /*
  * Optionally enable output from the AML Debug Object.
  */
-u32 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
+bool ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE);
 
 /*
  * Optionally copy the entire DSDT to local memory (instead of simply

drivers/acpi/apei/ghes.c

@@ -118,7 +118,7 @@ struct ghes_estatus_cache {
 	struct rcu_head rcu;
 };
 
-int ghes_disable;
+bool ghes_disable;
 module_param_named(disable, ghes_disable, bool, 0);
 
 static int ghes_panic_timeout	__read_mostly = 30;

drivers/acpi/apei/hest.c

@@ -41,7 +41,7 @@
 
 #define HEST_PFX "HEST: "
 
-int hest_disable;
+bool hest_disable;
 EXPORT_SYMBOL_GPL(hest_disable);
 
 /* HEST table parsing */

drivers/acpi/dock.c

@@ -43,7 +43,7 @@ MODULE_AUTHOR("Kristen Carlson Accardi");
 MODULE_DESCRIPTION(ACPI_DOCK_DRIVER_DESCRIPTION);
 MODULE_LICENSE("GPL");
 
-static int immediate_undock = 1;
+static bool immediate_undock = 1;
 module_param(immediate_undock, bool, 0644);
 MODULE_PARM_DESC(immediate_undock, "1 (default) will cause the driver to "
 	"undock immediately when the undock button is pressed, 0 will cause"

drivers/acpi/pci_slot.c

@@ -34,7 +34,7 @@
 #include <acpi/acpi_drivers.h>
 #include <linux/dmi.h>
 
-static int debug;
+static bool debug;
 static int check_sta_before_sun;
 
 #define DRIVER_VERSION 	"0.1"

drivers/acpi/video.c

@@ -69,21 +69,21 @@ MODULE_AUTHOR("Bruno Ducrot");
 MODULE_DESCRIPTION("ACPI Video Driver");
 MODULE_LICENSE("GPL");
 
-static int brightness_switch_enabled = 1;
+static bool brightness_switch_enabled = 1;
 module_param(brightness_switch_enabled, bool, 0644);
 
 /*
  * By default, we don't allow duplicate ACPI video bus devices
  * under the same VGA controller
  */
-static int allow_duplicates;
+static bool allow_duplicates;
 module_param(allow_duplicates, bool, 0644);
 
 /*
  * Some BIOSes claim they use minimum backlight at boot,
  * and this may bring dimming screen after boot
  */
-static int use_bios_initial_backlight = 1;
+static bool use_bios_initial_backlight = 1;
 module_param(use_bios_initial_backlight, bool, 0644);
 
 static int register_count = 0;

drivers/ata/sata_nv.c

@@ -599,9 +599,9 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 
-static int adma_enabled;
-static int swncq_enabled = 1;
-static int msi_enabled;
+static bool adma_enabled;
+static bool swncq_enabled = 1;
+static bool msi_enabled;
 
 static void nv_adma_register_mode(struct ata_port *ap)
 {

drivers/ata/sata_sil24.c

@@ -417,7 +417,7 @@ static struct ata_port_operations sil24_ops = {
 #endif
 };
 
-static int sata_sil24_msi;    /* Disable MSI */
+static bool sata_sil24_msi;    /* Disable MSI */
 module_param_named(msi, sata_sil24_msi, bool, S_IRUGO);
 MODULE_PARM_DESC(msi, "Enable MSI (Default: false)");
 

drivers/atm/he.c

@@ -112,12 +112,12 @@ static u8 read_prom_byte(struct he_dev *he_dev, int addr);
 /* globals */
 
 static struct he_dev *he_devs;
-static int disable64;
+static bool disable64;
 static short nvpibits = -1;
 static short nvcibits = -1;
 static short rx_skb_reserve = 16;
-static int irq_coalesce = 1;
-static int sdh = 0;
+static bool irq_coalesce = 1;
+static bool sdh = 0;
 
 /* Read from EEPROM = 0000 0011b */
 static unsigned int readtab[] = {

drivers/block/drbd/drbd_int.h

@@ -59,8 +59,8 @@
 
 /* module parameter, defined in drbd_main.c */
 extern unsigned int minor_count;
-extern int disable_sendpage;
-extern int allow_oos;
+extern bool disable_sendpage;
+extern bool allow_oos;
 extern unsigned int cn_idx;
 
 #ifdef CONFIG_DRBD_FAULT_INJECTION

drivers/block/drbd/drbd_main.c

@@ -117,8 +117,8 @@ module_param(fault_devs, int, 0644);
 
 /* module parameter, defined */
 unsigned int minor_count = DRBD_MINOR_COUNT_DEF;
-int disable_sendpage;
-int allow_oos;
+bool disable_sendpage;
+bool allow_oos;
 unsigned int cn_idx = CN_IDX_DRBD;
 int proc_details;       /* Detail level in proc drbd*/
 

drivers/block/paride/bpck6.c

@@ -20,9 +20,6 @@
 */
 
 
-/* PARAMETERS */
-static int verbose; /* set this to 1 to see debugging messages and whatnot */
-
 #define BACKPACK_VERSION "2.0.2"
 
 #include <linux/module.h>
@@ -36,6 +33,8 @@ static int verbose; /* set this to 1 to see debugging messages and whatnot */
 #include "ppc6lnx.c"
 #include "paride.h"
 
+/* PARAMETERS */
+static bool verbose; /* set this to 1 to see debugging messages and whatnot */
  
 
 #define PPCSTRUCT(pi) ((Interface *)(pi->private))

drivers/block/paride/pd.c

@@ -124,8 +124,9 @@
    by default.
 
 */
+#include <linux/types.h>
 
-static int verbose = 0;
+static bool verbose = 0;
 static int major = PD_MAJOR;
 static char *name = PD_NAME;
 static int cluster = 64;

drivers/block/paride/pf.c

@@ -118,13 +118,15 @@
 #define PF_NAME		"pf"
 #define PF_UNITS	4
 
+#include <linux/types.h>
+
 /* Here are things one can override from the insmod command.
    Most are autoprobed by paride unless set here.  Verbose is off
    by default.
 
 */
 
-static int verbose = 0;
+static bool verbose = 0;
 static int major = PF_MAJOR;
 static char *name = PF_NAME;
 static int cluster = 64;

drivers/block/paride/pg.c

@@ -130,13 +130,14 @@
 #define PI_PG	4
 #endif
 
+#include <linux/types.h>
 /* Here are things one can override from the insmod command.
    Most are autoprobed by paride unless set here.  Verbose is 0
    by default.
 
 */
 
-static int verbose = 0;
+static bool verbose = 0;
 static int major = PG_MAJOR;
 static char *name = PG_NAME;
 static int disable = 0;

drivers/block/paride/pt.c

@@ -109,13 +109,15 @@
 #define PT_NAME		"pt"
 #define PT_UNITS	4
 
+#include <linux/types.h>
+
 /* Here are things one can override from the insmod command.
    Most are autoprobed by paride unless set here.  Verbose is on
    by default.
 
 */
 
-static int verbose = 0;
+static bool verbose = 0;
 static int major = PT_MAJOR;
 static char *name = PT_NAME;
 static int disable = 0;

drivers/block/xd.c

@@ -148,7 +148,7 @@ static volatile int xdc_busy;
 static struct timer_list xd_watchdog_int;
 
 static volatile u_char xd_error;
-static int nodma = XD_DONT_USE_DMA;
+static bool nodma = XD_DONT_USE_DMA;
 
 static struct request_queue *xd_queue;
 

drivers/bluetooth/btusb.c

@@ -37,13 +37,13 @@
 
 #define VERSION "0.6"
 
-static int ignore_dga;
-static int ignore_csr;
-static int ignore_sniffer;
-static int disable_scofix;
-static int force_scofix;
+static bool ignore_dga;
+static bool ignore_csr;
+static bool ignore_sniffer;
+static bool disable_scofix;
+static bool force_scofix;
 
-static int reset = 1;
+static bool reset = 1;
 
 static struct usb_driver btusb_driver;
 

drivers/bluetooth/hci_bcsp.c

@@ -49,8 +49,8 @@
 
 #define VERSION "0.3"
 
-static int txcrc = 1;
-static int hciextn = 1;
+static bool txcrc = 1;
+static bool hciextn = 1;
 
 #define BCSP_TXWINSIZE	4
 

drivers/bluetooth/hci_ldisc.c

@@ -48,7 +48,7 @@
 
 #define VERSION "2.2"
 
-static int reset = 0;
+static bool reset = 0;
 
 static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
 

drivers/cdrom/cdrom.c

@@ -285,17 +285,17 @@
 #include <asm/uaccess.h>
 
 /* used to tell the module to turn on full debugging messages */
-static int debug;
+static bool debug;
 /* used to keep tray locked at all times */
 static int keeplocked;
 /* default compatibility mode */
-static int autoclose=1;
-static int autoeject;
-static int lockdoor = 1;
+static bool autoclose=1;
+static bool autoeject;
+static bool lockdoor = 1;
 /* will we ever get to use this... sigh. */
-static int check_media_type;
+static bool check_media_type;
 /* automatically restart mrw format */
-static int mrw_format_restart = 1;
+static bool mrw_format_restart = 1;
 module_param(debug, bool, 0);
 module_param(autoclose, bool, 0);
 module_param(autoeject, bool, 0);

drivers/char/agp/amd64-agp.c

@@ -33,7 +33,7 @@
 #define ULI_X86_64_ENU_SCR_REG		0x54
 
 static struct resource *aperture_resource;
-static int __initdata agp_try_unsupported = 1;
+static bool __initdata agp_try_unsupported = 1;
 static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)

drivers/char/agp/sis-agp.c

@@ -17,7 +17,7 @@
 #define PCI_DEVICE_ID_SI_662	0x0662
 #define PCI_DEVICE_ID_SI_671	0x0671
 
-static int __devinitdata agp_sis_force_delay = 0;
+static bool __devinitdata agp_sis_force_delay = 0;
 static int __devinitdata agp_sis_agp_spec = -1;
 
 static int sis_fetch_size(void)

drivers/char/i8k.c

@@ -69,19 +69,19 @@ MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
 MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
 MODULE_LICENSE("GPL");
 
-static int force;
+static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force loading without checking for supported models");
 
-static int ignore_dmi;
+static bool ignore_dmi;
 module_param(ignore_dmi, bool, 0);
 MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
 
-static int restricted;
+static bool restricted;
 module_param(restricted, bool, 0);
 MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
 
-static int power_status;
+static bool power_status;
 module_param(power_status, bool, 0600);
 MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
 

drivers/char/ipmi/ipmi_si_intf.c

@@ -1227,7 +1227,7 @@ static int smi_num; /* Used to sequence the SMIs */
 #define DEFAULT_REGSPACING	1
 #define DEFAULT_REGSIZE		1
 
-static int           si_trydefaults = 1;
+static bool          si_trydefaults = 1;
 static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
 static char          si_type_str[MAX_SI_TYPE_STR];

drivers/char/lp.c

@@ -829,7 +829,7 @@ static struct console lpcons = {
 
 static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC };
 static char *parport[LP_NO];
-static int reset;
+static bool reset;
 
 module_param_array(parport, charp, NULL, 0);
 module_param(reset, bool, 0);

drivers/char/nwflash.c

@@ -51,7 +51,7 @@ static int write_block(unsigned long p, const char __user *buf, int count);
 #define KFLASH_ID	0x89A6		//Intel flash
 #define KFLASH_ID4	0xB0D4		//Intel flash 4Meg
 
-static int flashdebug;		//if set - we will display progress msgs
+static bool flashdebug;		//if set - we will display progress msgs
 
 static int gbWriteEnable;
 static int gbWriteBase64Enable;

drivers/char/pcmcia/synclink_cs.c

@@ -439,7 +439,7 @@ static int mgslpc_device_count = 0;
  * .text section address and breakpoint on module load.
  * This is useful for use with gdb and add-symbol-file command.
  */
-static int break_on_load=0;
+static bool break_on_load=0;
 
 /*
  * Driver major number, defaults to zero to get auto

drivers/char/random.c

@@ -387,7 +387,7 @@ static DECLARE_WAIT_QUEUE_HEAD(random_write_wait);
 static struct fasync_struct *fasync;
 
 #if 0
-static int debug;
+static bool debug;
 module_param(debug, bool, 0644);
 #define DEBUG_ENT(fmt, arg...) do { \
 	if (debug) \

drivers/char/tpm/tpm_tis.c

@@ -255,7 +255,7 @@ out:
 	return size;
 }
 
-static int itpm;
+static bool itpm;
 module_param(itpm, bool, 0444);
 MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
 
@@ -500,7 +500,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int interrupts = 1;
+static bool interrupts = 1;
 module_param(interrupts, bool, 0444);
 MODULE_PARM_DESC(interrupts, "Enable interrupts");
 
@@ -828,7 +828,7 @@ static struct platform_driver tis_drv = {
 
 static struct platform_device *pdev;
 
-static int force;
+static bool force;
 module_param(force, bool, 0444);
 MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
 static int __init init_tis(void)

drivers/edac/r82600_edac.c

@@ -131,7 +131,7 @@ struct r82600_error_info {
 	u32 eapr;
 };
 
-static unsigned int disable_hardware_scrub;
+static bool disable_hardware_scrub;
 
 static struct edac_pci_ctl_info *r82600_pci;
 

drivers/firewire/sbp2.c

@@ -66,7 +66,7 @@
  *
  * Concurrent logins are useful together with cluster filesystems.
  */
-static int sbp2_param_exclusive_login = 1;
+static bool sbp2_param_exclusive_login = 1;
 module_param_named(exclusive_login, sbp2_param_exclusive_login, bool, 0644);
 MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
 		 "(default = Y, use N for concurrent initiators)");

drivers/hid/hid-prodikeys.c

@@ -90,7 +90,7 @@ static const char longname[] = "Prodikeys PC-MIDI Keyboard";
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
-static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
 
 module_param_array(index, int, NULL, 0444);
 module_param_array(id, charp, NULL, 0444);

drivers/hwmon/abituguru.c

@@ -145,7 +145,7 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
 
 
 /* Insmod parameters */
-static int force;
+static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
 static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,

drivers/hwmon/abituguru3.c

@@ -603,11 +603,11 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 
 
 /* Insmod parameters */
-static int force;
+static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Set to one to force detection.");
 /* Default verbose is 1, since this driver is still in the testing phase */
-static int verbose = 1;
+static bool verbose = 1;
 module_param(verbose, bool, 0644);
 MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
 

drivers/hwmon/acpi_power_meter.c

@@ -58,7 +58,7 @@ ACPI_MODULE_NAME(ACPI_POWER_METER_NAME);
 #define POWER_ALARM_NAME	"power1_alarm"
 
 static int cap_in_hardware;
-static int force_cap_on;
+static bool force_cap_on;
 
 static int can_cap_in_hardware(void)
 {

drivers/hwmon/adm1021.c

@@ -103,7 +103,7 @@ static int adm1021_remove(struct i2c_client *client);
 static struct adm1021_data *adm1021_update_device(struct device *dev);
 
 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only;
+static bool read_only;
 
 
 static const struct i2c_device_id adm1021_id[] = {

drivers/hwmon/ads7828.c

@@ -48,8 +48,8 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
 	I2C_CLIENT_END };
 
 /* Module parameters */
-static int se_input = 1; /* Default is SE, 0 == diff */
-static int int_vref = 1; /* Default is internal ref ON */
+static bool se_input = 1; /* Default is SE, 0 == diff */
+static bool int_vref = 1; /* Default is internal ref ON */
 static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */
 module_param(se_input, bool, S_IRUGO);
 module_param(int_vref, bool, S_IRUGO);

drivers/hwmon/dme1737.c

@@ -45,7 +45,7 @@
 static struct platform_device *pdev;
 
 /* Module load parameters */
-static int force_start;
+static bool force_start;
 module_param(force_start, bool, 0);
 MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
 
@@ -53,7 +53,7 @@ static unsigned short force_id;
 module_param(force_id, ushort, 0);
 MODULE_PARM_DESC(force_id, "Override the detected device ID");
 
-static int probe_all_addr;
+static bool probe_all_addr;
 module_param(probe_all_addr, bool, 0);
 MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
 		 "addresses");

drivers/hwmon/it87.c

@@ -146,10 +146,10 @@ static inline void superio_exit(void)
 #define IT87_SIO_BEEP_PIN_REG	0xf6	/* Beep pin mapping */
 
 /* Update battery voltage after every reading if true */
-static int update_vbat;
+static bool update_vbat;
 
 /* Not all BIOSes properly configure the PWM registers */
-static int fix_pwm_polarity;
+static bool fix_pwm_polarity;
 
 /* Many IT87 constants specified below */
 

drivers/hwmon/lm93.c

@@ -151,12 +151,12 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
 
 /* Insmod parameters */
 
-static int disable_block;
+static bool disable_block;
 module_param(disable_block, bool, 0);
 MODULE_PARM_DESC(disable_block,
 	"Set to non-zero to disable SMBus block data transactions.");
 
-static int init;
+static bool init;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization.");
 

drivers/hwmon/max1668.c

@@ -59,7 +59,7 @@ static unsigned short max1668_addr_list[] = {
 #define DEV_ID_MAX1989		0xb
 
 /* read only mode module parameter */
-static int read_only;
+static bool read_only;
 module_param(read_only, bool, 0);
 MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
 

drivers/hwmon/w83627hf.c

@@ -71,7 +71,7 @@ module_param(force_i2c, byte, 0);
 MODULE_PARM_DESC(force_i2c,
 		 "Initialize the i2c address of the sensors");
 
-static int init = 1;
+static bool init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
 

drivers/hwmon/w83781d.c

@@ -67,11 +67,11 @@ module_param_array(force_subclients, short, NULL, 0);
 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
 		    "{bus, clientaddr, subclientaddr1, subclientaddr2}");
 
-static int reset;
+static bool reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
 
-static int init = 1;
+static bool init = 1;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
 

drivers/hwmon/w83791d.c

@@ -58,11 +58,11 @@ module_param_array(force_subclients, short, NULL, 0);
 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
 			"{bus, clientaddr, subclientaddr1, subclientaddr2}");
 
-static int reset;
+static bool reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset");
 
-static int init;
+static bool init;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to one to force extra software initialization");
 

drivers/hwmon/w83792d.c

@@ -56,7 +56,7 @@ module_param_array(force_subclients, short, NULL, 0);
 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
 			"{bus, clientaddr, subclientaddr1, subclientaddr2}");
 
-static int init;
+static bool init;
 module_param(init, bool, 0);
 MODULE_PARM_DESC(init, "Set to one to force chip initialization");
 

drivers/hwmon/w83793.c

@@ -61,7 +61,7 @@ module_param_array(force_subclients, short, NULL, 0);
 MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
 		       "{bus, clientaddr, subclientaddr1, subclientaddr2}");
 
-static int reset;
+static bool reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
 

drivers/hwmon/w83795.c

@@ -42,7 +42,7 @@ static const unsigned short normal_i2c[] = {
 };
 
 
-static int reset;
+static bool reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
 

drivers/hwmon/w83l786ng.c

@@ -39,7 +39,7 @@ static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END };
 
 /* Insmod parameters */
 
-static int reset;
+static bool reset;
 module_param(reset, bool, 0);
 MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
 

drivers/i2c/busses/i2c-highlander.c

@@ -52,7 +52,7 @@ struct highlander_i2c_dev {
 	size_t			buf_len;
 };
 
-static int iic_force_poll, iic_force_normal;
+static bool iic_force_poll, iic_force_normal;
 static int iic_timeout = 1000, iic_read_delay;
 
 static inline void highlander_i2c_irq_enable(struct highlander_i2c_dev *dev)

drivers/i2c/busses/i2c-ibm_iic.c

@@ -51,11 +51,11 @@
 MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION);
 MODULE_LICENSE("GPL");
 
-static int iic_force_poll;
+static bool iic_force_poll;
 module_param(iic_force_poll, bool, 0);
 MODULE_PARM_DESC(iic_force_poll, "Force polling mode");
 
-static int iic_force_fast;
+static bool iic_force_fast;
 module_param(iic_force_fast, bool, 0);
 MODULE_PARM_DESC(iic_force_fast, "Force fast mode (400 kHz)");
 

drivers/i2c/busses/i2c-sis630.c

@@ -93,8 +93,8 @@
 static struct pci_driver sis630_driver;
 
 /* insmod parameters */
-static int high_clock;
-static int force;
+static bool high_clock;
+static bool force;
 module_param(high_clock, bool, 0);
 MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz).");
 module_param(force, bool, 0);

drivers/i2c/busses/i2c-viapro.c

@@ -91,7 +91,7 @@ static unsigned short SMBHSTCFG = 0xD2;
 
 /* If force is set to anything different from 0, we forcibly enable the
    VT596. DANGEROUS! */
-static int force;
+static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!");
 

drivers/ide/ali14xx.c

@@ -221,7 +221,7 @@ static int __init ali14xx_probe(void)
 	return ide_legacy_device_add(&ali14xx_port_info, 0);
 }
 
-static int probe_ali14xx;
+static bool probe_ali14xx;
 
 module_param_named(probe, probe_ali14xx, bool, 0);
 MODULE_PARM_DESC(probe, "probe for ALI M14xx chipsets");

drivers/ide/cmd640.c

@@ -111,7 +111,7 @@
 
 #define DRV_NAME "cmd640"
 
-static int cmd640_vlb;
+static bool cmd640_vlb;
 
 /*
  * CMD640 specific registers definition.

drivers/ide/dtc2278.c

@@ -130,7 +130,7 @@ static int __init dtc2278_probe(void)
 	return ide_legacy_device_add(&dtc2278_port_info, 0);
 }
 
-static int probe_dtc2278;
+static bool probe_dtc2278;
 
 module_param_named(probe, probe_dtc2278, bool, 0);
 MODULE_PARM_DESC(probe, "probe for DTC2278xx chipsets");

drivers/ide/gayle.c

@@ -50,7 +50,7 @@
 					       GAYLE_NUM_HWIFS-1)
 #define GAYLE_HAS_CONTROL_REG	(!ide_doubler)
 
-static int ide_doubler;
+static bool ide_doubler;
 module_param_named(doubler, ide_doubler, bool, 0);
 MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
 

drivers/ide/ht6560b.c

@@ -317,7 +317,7 @@ static void __init ht6560b_init_dev(ide_drive_t *drive)
 	ide_set_drivedata(drive, (void *)t);
 }
 
-static int probe_ht6560b;
+static bool probe_ht6560b;
 
 module_param_named(probe, probe_ht6560b, bool, 0);
 MODULE_PARM_DESC(probe, "probe for HT6560B chipset");

drivers/ide/ide-4drives.c

@@ -6,7 +6,7 @@
 
 #define DRV_NAME "ide-4drives"
 
-static int probe_4drives;
+static bool probe_4drives;
 
 module_param_named(probe, probe_4drives, bool, 0);
 MODULE_PARM_DESC(probe, "probe for generic IDE chipset with 4 drives/port");

drivers/ide/ide-acpi.c

@@ -53,15 +53,15 @@ struct ide_acpi_hwif_link {
 #define DEBPRINT(fmt, args...)	do {} while (0)
 #endif	/* DEBUGGING */
 
-static int ide_noacpi;
+static bool ide_noacpi;
 module_param_named(noacpi, ide_noacpi, bool, 0);
 MODULE_PARM_DESC(noacpi, "disable IDE ACPI support");
 
-static int ide_acpigtf;
+static bool ide_acpigtf;
 module_param_named(acpigtf, ide_acpigtf, bool, 0);
 MODULE_PARM_DESC(acpigtf, "enable IDE ACPI _GTF support");
 
-static int ide_acpionboot;
+static bool ide_acpionboot;
 module_param_named(acpionboot, ide_acpionboot, bool, 0);
 MODULE_PARM_DESC(acpionboot, "call IDE ACPI methods on boot");
 

drivers/ide/ide-pci-generic.c

@@ -28,7 +28,7 @@
 
 #define DRV_NAME "ide_pci_generic"
 
-static int ide_generic_all;		/* Set to claim all devices */
+static bool ide_generic_all;		/* Set to claim all devices */
 
 module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
 MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");

drivers/ide/qd65xx.c

@@ -417,7 +417,7 @@ static int __init qd_probe(int base)
 	return rc;
 }
 
-static int probe_qd65xx;
+static bool probe_qd65xx;
 
 module_param_named(probe, probe_qd65xx, bool, 0);
 MODULE_PARM_DESC(probe, "probe for QD65xx chipsets");

drivers/ide/umc8672.c

@@ -160,7 +160,7 @@ static int __init umc8672_probe(void)
 	return ide_legacy_device_add(&umc8672_port_info, 0);
 }
 
-static int probe_umc8672;
+static bool probe_umc8672;
 
 module_param_named(probe, probe_umc8672, bool, 0);
 MODULE_PARM_DESC(probe, "probe for UMC8672 chipset");

drivers/infiniband/hw/ehca/ehca_classes.h

@@ -379,8 +379,8 @@ extern spinlock_t shca_list_lock;
 
 extern int ehca_static_rate;
 extern int ehca_port_act_time;
-extern int ehca_use_hp_mr;
-extern int ehca_scaling_code;
+extern bool ehca_use_hp_mr;
+extern bool ehca_scaling_code;
 extern int ehca_lock_hcalls;
 extern int ehca_nr_ports;
 extern int ehca_max_cq;

drivers/infiniband/hw/ehca/ehca_main.c

@@ -59,16 +59,16 @@ MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
 MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver");
 MODULE_VERSION(HCAD_VERSION);
 
-static int ehca_open_aqp1     = 0;
+static bool ehca_open_aqp1    = 0;
 static int ehca_hw_level      = 0;
-static int ehca_poll_all_eqs  = 1;
+static bool ehca_poll_all_eqs = 1;
 
 int ehca_debug_level   = 0;
 int ehca_nr_ports      = -1;
-int ehca_use_hp_mr     = 0;
+bool ehca_use_hp_mr    = 0;
 int ehca_port_act_time = 30;
 int ehca_static_rate   = -1;
-int ehca_scaling_code  = 0;
+bool ehca_scaling_code = 0;
 int ehca_lock_hcalls   = -1;
 int ehca_max_cq        = -1;
 int ehca_max_qp        = -1;

drivers/infiniband/hw/nes/nes.c

@@ -96,7 +96,7 @@ unsigned int wqm_quanta = 0x10000;
 module_param(wqm_quanta, int, 0644);
 MODULE_PARM_DESC(wqm_quanta, "WQM quanta");
 
-static unsigned int limit_maxrdreqsz;
+static bool limit_maxrdreqsz;
 module_param(limit_maxrdreqsz, bool, 0644);
 MODULE_PARM_DESC(limit_maxrdreqsz, "Limit max read request size to 256 Bytes");
 

drivers/input/joystick/xpad.c

@@ -98,15 +98,15 @@
 #define XTYPE_XBOX360W    2
 #define XTYPE_UNKNOWN     3
 
-static int dpad_to_buttons;
+static bool dpad_to_buttons;
 module_param(dpad_to_buttons, bool, S_IRUGO);
 MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
 
-static int triggers_to_buttons;
+static bool triggers_to_buttons;
 module_param(triggers_to_buttons, bool, S_IRUGO);
 MODULE_PARM_DESC(triggers_to_buttons, "Map triggers to buttons rather than axes for unknown pads");
 
-static int sticks_to_null;
+static bool sticks_to_null;
 module_param(sticks_to_null, bool, S_IRUGO);
 MODULE_PARM_DESC(sticks_to_null, "Do not map sticks at all for unknown pads");
 

drivers/input/misc/wistron_btns.c

@@ -48,7 +48,7 @@ MODULE_DESCRIPTION("Wistron laptop button driver");
 MODULE_LICENSE("GPL v2");
 MODULE_VERSION("0.3");
 
-static int force; /* = 0; */
+static bool force; /* = 0; */
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Load even if computer is not in database");
 

drivers/input/mouse/psmouse-base.c

@@ -60,7 +60,7 @@ static unsigned int psmouse_rate = 100;
 module_param_named(rate, psmouse_rate, uint, 0644);
 MODULE_PARM_DESC(rate, "Report rate, in reports per second.");
 
-static unsigned int psmouse_smartscroll = 1;
+static bool psmouse_smartscroll = 1;
 module_param_named(smartscroll, psmouse_smartscroll, bool, 0644);
 MODULE_PARM_DESC(smartscroll, "Logitech Smartscroll autorepeat, 1 = enabled (default), 0 = disabled.");
 

drivers/input/mouse/synaptics_i2c.c

@@ -185,17 +185,17 @@
 #define NO_DATA_SLEEP_MSECS	(MSEC_PER_SEC / 4)
 
 /* Control touchpad's No Deceleration option */
-static int no_decel = 1;
+static bool no_decel = 1;
 module_param(no_decel, bool, 0644);
 MODULE_PARM_DESC(no_decel, "No Deceleration. Default = 1 (on)");
 
 /* Control touchpad's Reduced Reporting option */
-static int reduce_report;
+static bool reduce_report;
 module_param(reduce_report, bool, 0644);
 MODULE_PARM_DESC(reduce_report, "Reduced Reporting. Default = 0 (off)");
 
 /* Control touchpad's No Filter option */
-static int no_filter;
+static bool no_filter;
 module_param(no_filter, bool, 0644);
 MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
 

drivers/input/serio/hp_sdc.c

@@ -105,7 +105,7 @@ EXPORT_SYMBOL(__hp_sdc_enqueue_transaction);
 EXPORT_SYMBOL(hp_sdc_enqueue_transaction);
 EXPORT_SYMBOL(hp_sdc_dequeue_transaction);
 
-static unsigned int hp_sdc_disabled;
+static bool hp_sdc_disabled;
 module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0);
 MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver.");
 

drivers/input/touchscreen/eeti_ts.c

@@ -35,11 +35,11 @@
 #include <linux/input/eeti_ts.h>
 #include <linux/slab.h>
 
-static int flip_x;
+static bool flip_x;
 module_param(flip_x, bool, 0644);
 MODULE_PARM_DESC(flip_x, "flip x coordinate");
 
-static int flip_y;
+static bool flip_y;
 module_param(flip_y, bool, 0644);
 MODULE_PARM_DESC(flip_y, "flip y coordinate");
 

drivers/input/touchscreen/htcpen.c

@@ -40,10 +40,10 @@ MODULE_LICENSE("GPL");
 #define X_AXIS_MAX		2040
 #define Y_AXIS_MAX		2040
 
-static int invert_x;
+static bool invert_x;
 module_param(invert_x, bool, 0644);
 MODULE_PARM_DESC(invert_x, "If set, X axis is inverted");
-static int invert_y;
+static bool invert_y;
 module_param(invert_y, bool, 0644);
 MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted");
 

drivers/input/touchscreen/ucb1400_ts.c

@@ -30,7 +30,7 @@
 
 #define UCB1400_TS_POLL_PERIOD	10 /* ms */
 
-static int adcsync;
+static bool adcsync;
 static int ts_delay = 55; /* us */
 static int ts_delay_pressure;	/* us */
 

drivers/input/touchscreen/usbtouchscreen.c

@@ -60,11 +60,11 @@
 #define DRIVER_AUTHOR		"Daniel Ritz <daniel.ritz@gmx.ch>"
 #define DRIVER_DESC		"USB Touchscreen Driver"
 
-static int swap_xy;
+static bool swap_xy;
 module_param(swap_xy, bool, 0644);
 MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
 
-static int hwcalib_xy;
+static bool hwcalib_xy;
 module_param(hwcalib_xy, bool, 0644);
 MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
 

drivers/isdn/hardware/avm/b1dma.c

@@ -40,7 +40,7 @@ MODULE_DESCRIPTION("CAPI4Linux: DMA support for active AVM cards");
 MODULE_AUTHOR("Carsten Paeth");
 MODULE_LICENSE("GPL");
 
-static int suppress_pollack = 0;
+static bool suppress_pollack = 0;
 module_param(suppress_pollack, bool, 0);
 
 /* ------------------------------------------------------------- */

drivers/isdn/hardware/avm/c4.c

@@ -40,7 +40,7 @@ static char *revision = "$Revision: 1.1.2.2 $";
 
 /* ------------------------------------------------------------- */
 
-static int suppress_pollack;
+static bool suppress_pollack;
 
 static struct pci_device_id c4_pci_tbl[] = {
 	{ PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, PCI_VENDOR_ID_AVM, PCI_DEVICE_ID_AVM_C4, 0, 0, (unsigned long)4 },

drivers/isdn/sc/init.c

@@ -30,7 +30,7 @@ static const char *boardname[] = { "DataCommute/BRI", "DataCommute/PRI", "TeleCo
 static unsigned int io[] = {0,0,0,0};
 static unsigned char irq[] = {0,0,0,0};
 static unsigned long ram[] = {0,0,0,0};
-static int do_reset = 0;
+static bool do_reset = 0;
 
 module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);

drivers/leds/leds-clevo-mail.c

@@ -18,7 +18,7 @@ MODULE_AUTHOR("Márton Németh <nm127@freemail.hu>");
 MODULE_DESCRIPTION("Clevo mail LED driver");
 MODULE_LICENSE("GPL");
 
-static unsigned int __initdata nodetect;
+static bool __initdata nodetect;
 module_param_named(nodetect, nodetect, bool, 0);
 MODULE_PARM_DESC(nodetect, "Skip DMI hardware detection");
 

drivers/leds/leds-ss4200.c

@@ -79,7 +79,7 @@ static int __init ss4200_led_dmi_callback(const struct dmi_system_id *id)
 	return 1;
 }
 
-static unsigned int __initdata nodetect;
+static bool __initdata nodetect;
 module_param_named(nodetect, nodetect, bool, 0);
 MODULE_PARM_DESC(nodetect, "Skip DMI-based hardware detection");
 

drivers/macintosh/ams/ams-core.c

@@ -31,7 +31,7 @@
 /* There is only one motion sensor per machine */
 struct ams ams_info;
 
-static unsigned int verbose;
+static bool verbose;
 module_param(verbose, bool, 0644);
 MODULE_PARM_DESC(verbose, "Show free falls and shocks in kernel output");
 

drivers/macintosh/ams/ams-input.c

@@ -19,11 +19,11 @@
 
 #include "ams.h"
 
-static unsigned int joystick;
+static bool joystick;
 module_param(joystick, bool, S_IRUGO);
 MODULE_PARM_DESC(joystick, "Enable the input class device on module load");
 
-static unsigned int invert;
+static bool invert;
 module_param(invert, bool, S_IWUSR | S_IRUGO);
 MODULE_PARM_DESC(invert, "Invert input data on X and Y axis");
 

drivers/macintosh/therm_adt746x.c

@@ -52,7 +52,7 @@ static const char *sensor_location[3];
 
 static int limit_adjust;
 static int fan_speed = -1;
-static int verbose;
+static bool verbose;
 
 MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
 MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "

drivers/media/dvb/dvb-usb/af9005.c

@@ -30,7 +30,7 @@ MODULE_PARM_DESC(debug,
 		 "set debugging level (1=info,xfer=2,rc=4,reg=8,i2c=16,fw=32 (or-able))."
 		 DVB_USB_DEBUG_STATUS);
 /* enable obnoxious led */
-int dvb_usb_af9005_led = 1;
+bool dvb_usb_af9005_led = 1;
 module_param_named(led, dvb_usb_af9005_led, bool, 0644);
 MODULE_PARM_DESC(led, "enable led (default: 1).");
 

drivers/media/dvb/dvb-usb/af9005.h

@@ -35,7 +35,7 @@ extern int dvb_usb_af9005_debug;
 #define deb_i2c(args...)  dprintk(dvb_usb_af9005_debug,0x10,args)
 #define deb_fw(args...)   dprintk(dvb_usb_af9005_debug,0x20,args)
 
-extern int dvb_usb_af9005_led;
+extern bool dvb_usb_af9005_led;
 
 /* firmware */
 #define FW_BULKOUT_SIZE 250

drivers/media/radio/radio-gemtek.c

@@ -47,11 +47,11 @@ MODULE_VERSION("0.0.4");
 #endif
 
 static int io		= CONFIG_RADIO_GEMTEK_PORT;
-static int probe	= CONFIG_RADIO_GEMTEK_PROBE;
-static int hardmute;
-static int shutdown	= 1;
-static int keepmuted	= 1;
-static int initmute	= 1;
+static bool probe	= CONFIG_RADIO_GEMTEK_PROBE;
+static bool hardmute;
+static bool shutdown	= 1;
+static bool keepmuted	= 1;
+static bool initmute	= 1;
 static int radio_nr	= -1;
 
 module_param(io, int, 0444);

drivers/media/radio/radio-miropcm20.c

@@ -23,7 +23,7 @@ static int radio_nr = -1;
 module_param(radio_nr, int, 0);
 MODULE_PARM_DESC(radio_nr, "Set radio device number (/dev/radioX).  Default: -1 (autodetect)");
 
-static int mono;
+static bool mono;
 module_param(mono, bool, 0);
 MODULE_PARM_DESC(mono, "Force tuner into mono mode.");
 

drivers/media/rc/lirc_dev.c

@@ -38,7 +38,7 @@
 #include <media/lirc.h>
 #include <media/lirc_dev.h>
 
-static int debug;
+static bool debug;
 
 #define IRCTL_DEV_NAME	"BaseRemoteCtl"
 #define NOPLUG		-1

drivers/media/rc/mceusb.c

@@ -156,9 +156,9 @@
 
 /* module parameters */
 #ifdef CONFIG_USB_DEBUG
-static int debug = 1;
+static bool debug = 1;
 #else
-static int debug;
+static bool debug;
 #endif
 
 #define mce_dbg(dev, fmt, ...)					\

drivers/media/rc/streamzap.c

@@ -43,9 +43,9 @@
 #define DRIVER_DESC	"Streamzap Remote Control driver"
 
 #ifdef CONFIG_USB_DEBUG
-static int debug = 1;
+static bool debug = 1;
 #else
-static int debug;
+static bool debug;
 #endif
 
 #define USB_STREAMZAP_VENDOR_ID		0x0e9c

drivers/media/rc/winbond-cir.c

@@ -226,11 +226,11 @@ module_param(protocol, uint, 0444);
 MODULE_PARM_DESC(protocol, "IR protocol to use for the power-on command "
 		 "(0 = RC5, 1 = NEC, 2 = RC6A, default)");
 
-static int invert; /* default = 0 */
+static bool invert; /* default = 0 */
 module_param(invert, bool, 0444);
 MODULE_PARM_DESC(invert, "Invert the signal from the IR receiver");
 
-static int txandrx; /* default = 0 */
+static bool txandrx; /* default = 0 */
 module_param(txandrx, bool, 0444);
 MODULE_PARM_DESC(invert, "Allow simultaneous TX and RX");
 

drivers/media/video/c-qcam.c

@@ -72,7 +72,7 @@ struct qcam {
 
 static int parport[MAX_CAMS] = { [1 ... MAX_CAMS-1] = -1 };
 static int probe = 2;
-static int force_rgb;
+static bool force_rgb;
 static int video_nr = -1;
 
 /* FIXME: parport=auto would never have worked, surely? --RR */

drivers/media/video/cs5345.c

@@ -31,7 +31,7 @@ MODULE_DESCRIPTION("i2c device driver for cs5345 Audio ADC");
 MODULE_AUTHOR("Hans Verkuil");
 MODULE_LICENSE("GPL");
 
-static int debug;
+static bool debug;
 
 module_param(debug, bool, 0644);
 

drivers/media/video/cs53l32a.c

@@ -35,7 +35,7 @@ MODULE_DESCRIPTION("i2c device driver for cs53l32a Audio ADC");
 MODULE_AUTHOR("Martin Vaughan");
 MODULE_LICENSE("GPL");
 
-static int debug;
+static bool debug;
 
 module_param(debug, bool, 0644);
 

drivers/media/video/cx18/cx18-driver.c

@@ -75,7 +75,7 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1 };
 static unsigned cardtype_c = 1;
 static unsigned tuner_c = 1;
-static unsigned radio_c = 1;
+static bool radio_c = 1;
 static char pal[] = "--";
 static char secam[] = "--";
 static char ntsc[] = "-";

drivers/media/video/cx25821/cx25821-alsa.c

@@ -102,7 +102,7 @@ struct cx25821_audio_dev {
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
-static int enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 };
+static bool enable[SNDRV_CARDS] = { 1, [1 ... (SNDRV_CARDS - 1)] = 1 };
 
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable cx25821 soundcard. default enabled.");

drivers/media/video/cx88/cx88-alsa.c

@@ -96,7 +96,7 @@ typedef struct cx88_audio_dev snd_cx88_card_t;
 
 static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
 static const char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
-static int enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
+static bool enable[SNDRV_CARDS] = {1, [1 ... (SNDRV_CARDS - 1)] = 1};
 
 module_param_array(enable, bool, NULL, 0444);
 MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled.");

drivers/media/video/gspca/m5602/m5602_core.c

@@ -27,8 +27,8 @@
 
 /* Kernel module parameters */
 int force_sensor;
-static int dump_bridge;
-int dump_sensor;
+static bool dump_bridge;
+bool dump_sensor;
 
 static const struct usb_device_id m5602_table[] = {
 	{USB_DEVICE(0x0402, 0x5602)},

drivers/media/video/gspca/m5602/m5602_mt9m111.h

@@ -106,7 +106,7 @@
 
 /* Kernel module parameters */
 extern int force_sensor;
-extern int dump_sensor;
+extern bool dump_sensor;
 
 int mt9m111_probe(struct sd *sd);
 int mt9m111_init(struct sd *sd);