[ARM] pxa/ezx: GPIO configuration

Pin configs for different generations and phones.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.miao@marvell.com>

arch/arm/mach-pxa/ezx.c

@@ -101,36 +101,291 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* STUART */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
-	/* For A780 support (connected with Neptune GSM chip) */
-	GPIO30_USB_P3_2,	/* ICL_TXENB */
-	GPIO31_USB_P3_6,	/* ICL_VPOUT */
-	GPIO90_USB_P3_5,	/* ICL_VPIN */
-	GPIO91_USB_P3_1,	/* ICL_XRXD */
-	GPIO56_USB_P3_4,	/* ICL_VMOUT */
-	GPIO113_USB_P3_3,	/* /ICL_VMIN */
-
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
+
+	/* PCAP SSP */
+	GPIO29_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,				/* pcap chip select */
+	GPIO1_GPIO,				/* pcap interrupt */
+	GPIO4_GPIO,				/* WDI_AP */
+	GPIO55_GPIO,				/* SYS_RESTART */
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO11_GPIO,				/* mmc detect */
+
+	/* usb to external transceiver */
+	GPIO34_USB_P2_2,
+	GPIO35_USB_P2_1,
+	GPIO36_USB_P2_4,
+	GPIO39_USB_P2_6,
+	GPIO40_USB_P2_5,
+	GPIO53_USB_P2_3,
+
+	/* usb to Neptune GSM chip */
+	GPIO30_USB_P3_2,
+	GPIO31_USB_P3_6,
+	GPIO90_USB_P3_5,
+	GPIO91_USB_P3_1,
+	GPIO56_USB_P3_4,
+	GPIO113_USB_P3_3,
+};
+
+#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
+static unsigned long gen1_pin_config[] __initdata = {
+	/* flip / lockswitch */
+	GPIO12_GPIO,
+
+	/* bluetooth (bcm2035) */
+	GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO48_GPIO,				/* RESET */
+	GPIO28_GPIO,				/* WAKEUP */
+
+	/* Neptune handshake */
+	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
+	GPIO57_GPIO,				/* AP_RDY */
+	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
+	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI2 */
+	GPIO82_GPIO,				/* RESET */
+	GPIO99_GPIO,				/* TC_MM_EN */
+
+	/* sound */
+	GPIO52_SSP3_SCLK,
+	GPIO83_SSP3_SFRM,
+	GPIO81_SSP3_TXD,
+	GPIO89_SSP3_RXD,
+
+	/* ssp2 pins to in */
+	GPIO22_GPIO,				/* SSP2_SCLK */
+	GPIO37_GPIO,				/* SSP2_SFRM */
+	GPIO38_GPIO,				/* SSP2_TXD */
+	GPIO88_GPIO,				/* SSP2_RXD */
+
+	/* camera */
+	GPIO23_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO85_CIF_LV,
+	GPIO84_CIF_FV,
+	GPIO27_CIF_DD_0,
+	GPIO114_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO115_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO50_GPIO,				/* CAM_EN */
+	GPIO19_GPIO,				/* CAM_RST */
+
+	/* EMU */
+	GPIO120_GPIO,				/* EMU_MUX1 */
+	GPIO119_GPIO,				/* EMU_MUX2 */
+	GPIO86_GPIO,				/* SNP_INT_CTL */
+	GPIO87_GPIO,				/* SNP_INT_IN */
 };
+#endif
+
+#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
+	defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
+static unsigned long gen2_pin_config[] __initdata = {
+	/* flip / lockswitch */
+	GPIO15_GPIO,
+
+	/* EOC */
+	GPIO10_GPIO,
+
+	/* bluetooth (bcm2045) */
+	GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+	GPIO37_GPIO,				/* RESET */
+	GPIO57_GPIO,				/* WAKEUP */
+
+	/* Neptune handshake */
+	GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* BP_RDY */
+	GPIO96_GPIO,				/* AP_RDY */
+	GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* WDI */
+	GPIO116_GPIO,				/* RESET */
+	GPIO41_GPIO,				/* BP_FLASH */
+
+	/* sound */
+	GPIO52_SSP3_SCLK,
+	GPIO83_SSP3_SFRM,
+	GPIO81_SSP3_TXD,
+	GPIO82_SSP3_RXD,
+
+	/* ssp2 pins to in */
+	GPIO22_GPIO,				/* SSP2_SCLK */
+	GPIO14_GPIO,				/* SSP2_SFRM */
+	GPIO38_GPIO,				/* SSP2_TXD */
+	GPIO88_GPIO,				/* SSP2_RXD */
 
-static void __init ezx_init(void)
+	/* camera */
+	GPIO23_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO85_CIF_LV,
+	GPIO84_CIF_FV,
+	GPIO27_CIF_DD_0,
+	GPIO114_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO115_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+	GPIO50_GPIO,				/* CAM_EN */
+	GPIO28_GPIO,				/* CAM_RST */
+	GPIO17_GPIO,				/* CAM_FLASH */
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+static unsigned long a780_pin_config[] __initdata = {
+	/* keypad */
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+
+	/* attenuate sound */
+	GPIO96_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+static unsigned long e680_pin_config[] __initdata = {
+	/* keypad */
+	GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+
+	/* MIDI */
+	GPIO79_GPIO,				/* VA_SEL_BUL */
+	GPIO80_GPIO,				/* FLT_SEL_BUL */
+	GPIO78_GPIO,				/* MIDI_RESET */
+	GPIO33_GPIO,				/* MIDI_CS */
+	GPIO15_GPIO,				/* MIDI_IRQ */
+	GPIO49_GPIO,				/* MIDI_NPWE */
+	GPIO18_GPIO,				/* MIDI_RDY */
+
+	/* leds */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+static unsigned long a1200_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+static unsigned long a910_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+
+	/* WLAN */
+	GPIO89_GPIO,				/* RESET */
+	GPIO33_GPIO,				/* WAKEUP */
+	GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH,	/* HOSTWAKE */
+
+	/* MMC CS */
+	GPIO20_GPIO,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+static unsigned long e2_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+static unsigned long e6_pin_config[] __initdata = {
+	/* keypad */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+};
+#endif
+
+#ifdef CONFIG_MACH_EZX_A780
+static void __init a780_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
+
 	pxa_set_i2c_info(NULL);
-	if (machine_is_ezx_a780() || machine_is_ezx_e680())
-		set_pxa_fb_info(&ezx_fb_info_1);
-	else
-		set_pxa_fb_info(&ezx_fb_info_2);
+
+	set_pxa_fb_info(&ezx_fb_info_1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
-#ifdef CONFIG_MACH_EZX_A780
 MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -138,11 +393,24 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = a780_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E680
+static void __init e680_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
+
+	pxa_set_i2c_info(NULL);
+
+	set_pxa_fb_info(&ezx_fb_info_1);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -150,11 +418,24 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = e680_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A1200
+static void __init a1200_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
+
+	pxa_set_i2c_info(NULL);
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -162,11 +443,24 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = a1200_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_A910
+static void __init a910_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
+
+	pxa_set_i2c_info(NULL);
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -174,11 +468,24 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = a910_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E6
+static void __init e6_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
+
+	pxa_set_i2c_info(NULL);
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -186,11 +493,24 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = e6_init,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_EZX_E2
+static void __init e2_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
+
+	pxa_set_i2c_info(NULL);
+
+	set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
 MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.phys_io        = 0x40000000,
 	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
@@ -198,6 +518,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.map_io         = pxa_map_io,
 	.init_irq       = pxa27x_init_irq,
 	.timer          = &pxa_timer,
-	.init_machine   = &ezx_init,
+	.init_machine   = e2_init,
 MACHINE_END
 #endif