Merge tag 'usb-3.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of USB fixes that resolve issues that have been
  reported against 3.9-rc3."

* tag 'usb-3.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (37 commits)
  USB: ti_usb_3410_5052: fix use-after-free in TIOCMIWAIT
  USB: ssu100: fix use-after-free in TIOCMIWAIT
  USB: spcp8x5: fix use-after-free in TIOCMIWAIT
  USB: quatech2: fix use-after-free in TIOCMIWAIT
  USB: pl2303: fix use-after-free in TIOCMIWAIT
  USB: oti6858: fix use-after-free in TIOCMIWAIT
  USB: mos7840: fix use-after-free in TIOCMIWAIT
  USB: mos7840: fix broken TIOCMIWAIT
  USB: mct_u232: fix use-after-free in TIOCMIWAIT
  USB: io_ti: fix use-after-free in TIOCMIWAIT
  USB: io_edgeport: fix use-after-free in TIOCMIWAIT
  USB: ftdi_sio: fix use-after-free in TIOCMIWAIT
  USB: f81232: fix use-after-free in TIOCMIWAIT
  USB: cypress_m8: fix use-after-free in TIOCMIWAIT
  USB: ch341: fix use-after-free in TIOCMIWAIT
  USB: ark3116: fix use-after-free in TIOCMIWAIT
  USB: serial: add modem-status-change wait queue
  USB: serial: fix interface refcounting
  USB: io_ti: fix get_icount for two port adapters
  USB: garmin_gps: fix memory leak on disconnect
  ...

drivers/usb/class/cdc-acm.c

@@ -593,7 +593,6 @@ static void acm_port_destruct(struct tty_port *port)
 
 	dev_dbg(&acm->control->dev, "%s\n", __func__);
 
-	tty_unregister_device(acm_tty_driver, acm->minor);
 	acm_release_minor(acm);
 	usb_put_intf(acm->control);
 	kfree(acm->country_codes);
@@ -977,6 +976,8 @@ static int acm_probe(struct usb_interface *intf,
 	int num_rx_buf;
 	int i;
 	int combined_interfaces = 0;
+	struct device *tty_dev;
+	int rv = -ENOMEM;
 
 	/* normal quirks */
 	quirks = (unsigned long)id->driver_info;
@@ -1339,11 +1340,24 @@ skip_countries:
 	usb_set_intfdata(data_interface, acm);
 
 	usb_get_intf(control_interface);
-	tty_port_register_device(&acm->port, acm_tty_driver, minor,
+	tty_dev = tty_port_register_device(&acm->port, acm_tty_driver, minor,
 			&control_interface->dev);
+	if (IS_ERR(tty_dev)) {
+		rv = PTR_ERR(tty_dev);
+		goto alloc_fail8;
+	}
 
 	return 0;
+alloc_fail8:
+	if (acm->country_codes) {
+		device_remove_file(&acm->control->dev,
+				&dev_attr_wCountryCodes);
+		device_remove_file(&acm->control->dev,
+				&dev_attr_iCountryCodeRelDate);
+	}
+	device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities);
 alloc_fail7:
+	usb_set_intfdata(intf, NULL);
 	for (i = 0; i < ACM_NW; i++)
 		usb_free_urb(acm->wb[i].urb);
 alloc_fail6:
@@ -1359,7 +1373,7 @@ alloc_fail2:
 	acm_release_minor(acm);
 	kfree(acm);
 alloc_fail:
-	return -ENOMEM;
+	return rv;
 }
 
 static void stop_data_traffic(struct acm *acm)
@@ -1411,6 +1425,8 @@ static void acm_disconnect(struct usb_interface *intf)
 
 	stop_data_traffic(acm);
 
+	tty_unregister_device(acm_tty_driver, acm->minor);
+
 	usb_free_urb(acm->ctrlurb);
 	for (i = 0; i < ACM_NW; i++)
 		usb_free_urb(acm->wb[i].urb);

drivers/usb/core/hcd-pci.c

@@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	struct hc_driver	*driver;
 	struct usb_hcd		*hcd;
 	int			retval;
+	int			hcd_irq = 0;
 
 	if (usb_disabled())
 		return -ENODEV;
@@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	dev->current_state = PCI_D0;
 
-	/* The xHCI driver supports MSI and MSI-X,
-	 * so don't fail if the BIOS doesn't provide a legacy IRQ.
+	/*
+	 * The xHCI driver has its own irq management
+	 * make sure irq setup is not touched for xhci in generic hcd code
 	 */
-	if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
-		dev_err(&dev->dev,
-			"Found HC with no IRQ.  Check BIOS/PCI %s setup!\n",
-			pci_name(dev));
-		retval = -ENODEV;
-		goto disable_pci;
+	if ((driver->flags & HCD_MASK) != HCD_USB3) {
+		if (!dev->irq) {
+			dev_err(&dev->dev,
+			"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+				pci_name(dev));
+			retval = -ENODEV;
+			goto disable_pci;
+		}
+		hcd_irq = dev->irq;
 	}
 
 	hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
@@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 
 	pci_set_master(dev);
 
-	retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+	retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
 	if (retval != 0)
 		goto unmap_registers;
 	set_hs_companion(dev, hcd);

drivers/usb/gadget/f_rndis.c

@@ -447,14 +447,13 @@ static void rndis_response_complete(struct usb_ep *ep, struct usb_request *req)
 static void rndis_command_complete(struct usb_ep *ep, struct usb_request *req)
 {
 	struct f_rndis			*rndis = req->context;
-	struct usb_composite_dev	*cdev = rndis->port.func.config->cdev;
 	int				status;
 
 	/* received RNDIS command from USB_CDC_SEND_ENCAPSULATED_COMMAND */
 //	spin_lock(&dev->lock);
 	status = rndis_msg_parser(rndis->config, (u8 *) req->buf);
 	if (status < 0)
-		ERROR(cdev, "RNDIS command error %d, %d/%d\n",
+		pr_err("RNDIS command error %d, %d/%d\n",
 			status, req->actual, req->length);
 //	spin_unlock(&dev->lock);
 }

drivers/usb/gadget/g_ffs.c

@@ -357,7 +357,7 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 		goto error;
 	gfs_dev_desc.iProduct = gfs_strings[USB_GADGET_PRODUCT_IDX].id;
 
-	for (i = func_num; --i; ) {
+	for (i = func_num; i--; ) {
 		ret = functionfs_bind(ffs_tab[i].ffs_data, cdev);
 		if (unlikely(ret < 0)) {
 			while (++i < func_num)
@@ -413,7 +413,7 @@ static int gfs_unbind(struct usb_composite_dev *cdev)
 		gether_cleanup();
 	gfs_ether_setup = false;
 
-	for (i = func_num; --i; )
+	for (i = func_num; i--; )
 		if (ffs_tab[i].ffs_data)
 			functionfs_unbind(ffs_tab[i].ffs_data);
 

drivers/usb/gadget/net2272.c

@@ -59,7 +59,7 @@ static const char * const ep_name[] = {
 };
 
 #define DMA_ADDR_INVALID	(~(dma_addr_t)0)
-#ifdef CONFIG_USB_GADGET_NET2272_DMA
+#ifdef CONFIG_USB_NET2272_DMA
 /*
  * use_dma: the NET2272 can use an external DMA controller.
  * Note that since there is no generic DMA api, some functions,
@@ -1495,6 +1495,13 @@ stop_activity(struct net2272 *dev, struct usb_gadget_driver *driver)
 	for (i = 0; i < 4; ++i)
 		net2272_dequeue_all(&dev->ep[i]);
 
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
+
 	net2272_usb_reinit(dev);
 }
 

drivers/usb/gadget/net2280.c

@@ -1924,7 +1924,6 @@ static int net2280_start(struct usb_gadget *_gadget,
 err_func:
 	device_remove_file (&dev->pdev->dev, &dev_attr_function);
 err_unbind:
-	driver->unbind (&dev->gadget);
 	dev->gadget.dev.driver = NULL;
 	dev->driver = NULL;
 	return retval;
@@ -1946,6 +1945,13 @@ stop_activity (struct net2280 *dev, struct usb_gadget_driver *driver)
 	for (i = 0; i < 7; i++)
 		nuke (&dev->ep [i]);
 
+	/* report disconnect; the driver is already quiesced */
+	if (driver) {
+		spin_unlock(&dev->lock);
+		driver->disconnect(&dev->gadget);
+		spin_lock(&dev->lock);
+	}
+
 	usb_reinit (dev);
 }
 

drivers/usb/gadget/u_serial.c

@@ -136,7 +136,7 @@ static struct portmaster {
 	pr_debug(fmt, ##arg)
 #endif /* pr_vdebug */
 #else
-#ifndef pr_vdebig
+#ifndef pr_vdebug
 #define pr_vdebug(fmt, arg...) \
 	({ if (0) pr_debug(fmt, ##arg); })
 #endif /* pr_vdebug */

drivers/usb/gadget/udc-core.c

@@ -216,7 +216,7 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 	usb_gadget_disconnect(udc->gadget);
 	udc->driver->disconnect(udc->gadget);
 	udc->driver->unbind(udc->gadget);
-	usb_gadget_udc_stop(udc->gadget, udc->driver);
+	usb_gadget_udc_stop(udc->gadget, NULL);
 
 	udc->driver = NULL;
 	udc->dev.driver = NULL;

drivers/usb/host/ehci-hcd.c

@@ -302,6 +302,7 @@ static void ehci_quiesce (struct ehci_hcd *ehci)
 
 static void end_unlink_async(struct ehci_hcd *ehci);
 static void unlink_empty_async(struct ehci_hcd *ehci);
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci);
 static void ehci_work(struct ehci_hcd *ehci);
 static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
 static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);

drivers/usb/host/ehci-hub.c

@@ -328,7 +328,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 	ehci->rh_state = EHCI_RH_SUSPENDED;
 
 	end_unlink_async(ehci);
-	unlink_empty_async(ehci);
+	unlink_empty_async_suspended(ehci);
 	ehci_handle_intr_unlinks(ehci);
 	end_free_itds(ehci);
 

drivers/usb/host/ehci-q.c

@@ -1316,6 +1316,19 @@ static void unlink_empty_async(struct ehci_hcd *ehci)
 	}
 }
 
+/* The root hub is suspended; unlink all the async QHs */
+static void unlink_empty_async_suspended(struct ehci_hcd *ehci)
+{
+	struct ehci_qh		*qh;
+
+	while (ehci->async->qh_next.qh) {
+		qh = ehci->async->qh_next.qh;
+		WARN_ON(!list_empty(&qh->qtd_list));
+		single_unlink_async(ehci, qh);
+	}
+	start_iaa_cycle(ehci, false);
+}
+
 /* makes sure the async qh will become idle */
 /* caller must own ehci->lock */
 

drivers/usb/host/ehci-timer.c

@@ -304,7 +304,7 @@ static void ehci_iaa_watchdog(struct ehci_hcd *ehci)
 	 * (a) SMP races against real IAA firing and retriggering, and
 	 * (b) clean HC shutdown, when IAA watchdog was pending.
 	 */
-	if (ehci->async_iaa) {
+	if (1) {
 		u32 cmd, status;
 
 		/* If we get here, IAA is *REALLY* late.  It's barely

drivers/usb/host/xhci.c

@@ -350,7 +350,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 	 * generate interrupts.  Don't even try to enable MSI.
 	 */
 	if (xhci->quirks & XHCI_BROKEN_MSI)
-		return 0;
+		goto legacy_irq;
 
 	/* unregister the legacy interrupt */
 	if (hcd->irq)
@@ -371,6 +371,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
 		return -EINVAL;
 	}
 
+ legacy_irq:
 	/* fall back to legacy interrupt*/
 	ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
 			hcd->irq_descr, hcd);

drivers/usb/host/xhci.h

@@ -206,8 +206,8 @@ struct xhci_op_regs {
 /* bits 12:31 are reserved (and should be preserved on writes). */
 
 /* IMAN - Interrupt Management Register */
-#define IMAN_IP		(1 << 1)
-#define IMAN_IE		(1 << 0)
+#define IMAN_IE		(1 << 1)
+#define IMAN_IP		(1 << 0)
 
 /* USBSTS - USB status - status bitmasks */
 /* HC not running - set to 1 when run/stop bit is cleared. */

drivers/usb/musb/da8xx.c

@@ -327,7 +327,7 @@ static irqreturn_t da8xx_musb_interrupt(int irq, void *hci)
 		u8 devctl = musb_readb(mregs, MUSB_DEVCTL);
 		int err;
 
-		err = musb->int_usb & USB_INTR_VBUSERROR;
+		err = musb->int_usb & MUSB_INTR_VBUSERROR;
 		if (err) {
 			/*
 			 * The Mentor core doesn't debounce VBUS as needed

drivers/usb/musb/musb_gadget.c

@@ -141,7 +141,9 @@ static inline void map_dma_buffer(struct musb_request *request,
 static inline void unmap_dma_buffer(struct musb_request *request,
 				struct musb *musb)
 {
-	if (!is_buffer_mapped(request))
+	struct musb_ep *musb_ep = request->ep;
+
+	if (!is_buffer_mapped(request) || !musb_ep->dma)
 		return;
 
 	if (request->request.dma == DMA_ADDR_INVALID) {
@@ -195,7 +197,10 @@ __acquires(ep->musb->lock)
 
 	ep->busy = 1;
 	spin_unlock(&musb->lock);
-	unmap_dma_buffer(req, musb);
+
+	if (!dma_mapping_error(&musb->g.dev, request->dma))
+		unmap_dma_buffer(req, musb);
+
 	if (request->status == 0)
 		dev_dbg(musb->controller, "%s done request %p,  %d/%d\n",
 				ep->end_point.name, request,

drivers/usb/serial/ark3116.c

@@ -62,7 +62,6 @@ static int is_irda(struct usb_serial *serial)
 }
 
 struct ark3116_private {
-	wait_queue_head_t       delta_msr_wait;
 	struct async_icount	icount;
 	int			irda;	/* 1 for irda device */
 
@@ -146,7 +145,6 @@ static int ark3116_port_probe(struct usb_serial_port *port)
 	if (!priv)
 		return -ENOMEM;
 
-	init_waitqueue_head(&priv->delta_msr_wait);
 	mutex_init(&priv->hw_lock);
 	spin_lock_init(&priv->status_lock);
 
@@ -456,10 +454,14 @@ static int ark3116_ioctl(struct tty_struct *tty,
 	case TIOCMIWAIT:
 		for (;;) {
 			struct async_icount prev = priv->icount;
-			interruptible_sleep_on(&priv->delta_msr_wait);
+			interruptible_sleep_on(&port->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			if ((prev.rng == priv->icount.rng) &&
 			    (prev.dsr == priv->icount.dsr) &&
 			    (prev.dcd == priv->icount.dcd) &&
@@ -580,7 +582,7 @@ static void ark3116_update_msr(struct usb_serial_port *port, __u8 msr)
 			priv->icount.dcd++;
 		if (msr & UART_MSR_TERI)
 			priv->icount.rng++;
-		wake_up_interruptible(&priv->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
 }
 

drivers/usb/serial/ch341.c

@@ -80,7 +80,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct ch341_private {
 	spinlock_t lock; /* access lock */
-	wait_queue_head_t delta_msr_wait; /* wait queue for modem status */
 	unsigned baud_rate; /* set baud rate */
 	u8 line_control; /* set line control value RTS/DTR */
 	u8 line_status; /* active status of modem control inputs */
@@ -252,7 +251,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 	priv->baud_rate = DEFAULT_BAUD_RATE;
 	priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
 
@@ -298,7 +296,7 @@ static void ch341_dtr_rts(struct usb_serial_port *port, int on)
 		priv->line_control &= ~(CH341_BIT_RTS | CH341_BIT_DTR);
 	spin_unlock_irqrestore(&priv->lock, flags);
 	ch341_set_handshake(port->serial->dev, priv->line_control);
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 }
 
 static void ch341_close(struct usb_serial_port *port)
@@ -491,7 +489,7 @@ static void ch341_read_int_callback(struct urb *urb)
 			tty_kref_put(tty);
 		}
 
-		wake_up_interruptible(&priv->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
 
 exit:
@@ -517,11 +515,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (!multi_change) {
-		interruptible_sleep_on(&priv->delta_msr_wait);
+		interruptible_sleep_on(&port->delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->line_status;
 		multi_change = priv->multi_status_change;

drivers/usb/serial/cypress_m8.c

@@ -111,7 +111,6 @@ struct cypress_private {
 	int baud_rate;			   /* stores current baud rate in
 					      integer form */
 	int isthrottled;		   /* if throttled, discard reads */
-	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
 	/* we pass a pointer to this as the argument sent to
 	   cypress_set_termios old_termios */
@@ -449,7 +448,6 @@ static int cypress_generic_port_probe(struct usb_serial_port *port)
 		kfree(priv);
 		return -ENOMEM;
 	}
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	usb_reset_configuration(serial->dev);
 
@@ -868,12 +866,16 @@ static int cypress_ioctl(struct tty_struct *tty,
 	switch (cmd) {
 	/* This code comes from drivers/char/serial.c and ftdi_sio.c */
 	case TIOCMIWAIT:
-		while (priv != NULL) {
-			interruptible_sleep_on(&priv->delta_msr_wait);
+		for (;;) {
+			interruptible_sleep_on(&port->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
-			else {
+
+			if (port->serial->disconnected)
+				return -EIO;
+
+			{
 				char diff = priv->diff_status;
 				if (diff == 0)
 					return -EIO; /* no change => error */
@@ -1187,7 +1189,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	if (priv->current_status != priv->prev_status) {
 		priv->diff_status |= priv->current_status ^
 			priv->prev_status;
-		wake_up_interruptible(&priv->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 		priv->prev_status = priv->current_status;
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);

drivers/usb/serial/f81232.c

@@ -47,7 +47,6 @@ MODULE_DEVICE_TABLE(usb, id_table);
 
 struct f81232_private {
 	spinlock_t lock;
-	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
 };
@@ -111,7 +110,7 @@ static void f81232_process_read_urb(struct urb *urb)
 	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	if (!urb->actual_length)
 		return;
@@ -256,11 +255,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		interruptible_sleep_on(&priv->delta_msr_wait);
+		interruptible_sleep_on(&port->delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->line_status;
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -322,7 +324,6 @@ static int f81232_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	usb_set_serial_port_data(port, priv);
 

drivers/usb/serial/ftdi_sio.c

@@ -69,9 +69,7 @@ struct ftdi_private {
 	int flags;		/* some ASYNC_xxxx flags are supported */
 	unsigned long last_dtr_rts;	/* saved modem control outputs */
 	struct async_icount	icount;
-	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	char prev_status;        /* Used for TIOCMIWAIT */
-	bool dev_gone;        /* Used to abort TIOCMIWAIT */
 	char transmit_empty;	/* If transmitter is empty or not */
 	__u16 interface;	/* FT2232C, FT2232H or FT4232H port interface
 				   (0 for FT232/245) */
@@ -1691,10 +1689,8 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	kref_init(&priv->kref);
 	mutex_init(&priv->cfg_lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	priv->flags = ASYNC_LOW_LATENCY;
-	priv->dev_gone = false;
 
 	if (quirk && quirk->port_probe)
 		quirk->port_probe(priv);
@@ -1840,8 +1836,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
 
-	priv->dev_gone = true;
-	wake_up_interruptible_all(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	remove_sysfs_attrs(port);
 
@@ -1989,7 +1984,7 @@ static int ftdi_process_packet(struct usb_serial_port *port,
 		if (diff_status & FTDI_RS0_RLSD)
 			priv->icount.dcd++;
 
-		wake_up_interruptible_all(&priv->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 		priv->prev_status = status;
 	}
 
@@ -2440,11 +2435,15 @@ static int ftdi_ioctl(struct tty_struct *tty,
 	 */
 	case TIOCMIWAIT:
 		cprev = priv->icount;
-		while (!priv->dev_gone) {
-			interruptible_sleep_on(&priv->delta_msr_wait);
+		for (;;) {
+			interruptible_sleep_on(&port->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			cnow = priv->icount;
 			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
 			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
@@ -2454,8 +2453,6 @@ static int ftdi_ioctl(struct tty_struct *tty,
 			}
 			cprev = cnow;
 		}
-		return -EIO;
-		break;
 	case TIOCSERGETLSR:
 		return get_lsr_info(port, (struct serial_struct __user *)arg);
 		break;

drivers/usb/serial/garmin_gps.c

@@ -956,10 +956,7 @@ static void garmin_close(struct usb_serial_port *port)
 	if (!serial)
 		return;
 
-	mutex_lock(&port->serial->disc_mutex);
-
-	if (!port->serial->disconnected)
-		garmin_clear(garmin_data_p);
+	garmin_clear(garmin_data_p);
 
 	/* shutdown our urbs */
 	usb_kill_urb(port->read_urb);
@@ -968,8 +965,6 @@ static void garmin_close(struct usb_serial_port *port)
 	/* keep reset state so we know that we must start a new session */
 	if (garmin_data_p->state != STATE_RESET)
 		garmin_data_p->state = STATE_DISCONNECTED;
-
-	mutex_unlock(&port->serial->disc_mutex);
 }
 
 

drivers/usb/serial/io_edgeport.c

@@ -110,7 +110,6 @@ struct edgeport_port {
 	wait_queue_head_t	wait_chase;		/* for handling sleeping while waiting for chase to finish */
 	wait_queue_head_t	wait_open;		/* for handling sleeping while waiting for open to finish */
 	wait_queue_head_t	wait_command;		/* for handling sleeping while waiting for command to finish */
-	wait_queue_head_t	delta_msr_wait;		/* for handling sleeping while waiting for msr change to happen */
 
 	struct async_icount	icount;
 	struct usb_serial_port	*port;			/* loop back to the owner of this object */
@@ -884,7 +883,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* initialize our wait queues */
 	init_waitqueue_head(&edge_port->wait_open);
 	init_waitqueue_head(&edge_port->wait_chase);
-	init_waitqueue_head(&edge_port->delta_msr_wait);
 	init_waitqueue_head(&edge_port->wait_command);
 
 	/* initialize our icount structure */
@@ -1669,13 +1667,17 @@ static int edge_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev, "%s (%d) TIOCMIWAIT\n", __func__,  port->number);
 		cprev = edge_port->icount;
 		while (1) {
-			prepare_to_wait(&edge_port->delta_msr_wait,
+			prepare_to_wait(&port->delta_msr_wait,
 						&wait, TASK_INTERRUPTIBLE);
 			schedule();
-			finish_wait(&edge_port->delta_msr_wait, &wait);
+			finish_wait(&port->delta_msr_wait, &wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			cnow = edge_port->icount;
 			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
 			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
@@ -2051,7 +2053,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr)
 			icount->dcd++;
 		if (newMsr & EDGEPORT_MSR_DELTA_RI)
 			icount->rng++;
-		wake_up_interruptible(&edge_port->delta_msr_wait);
+		wake_up_interruptible(&edge_port->port->delta_msr_wait);
 	}
 
 	/* Save the new modem status */

drivers/usb/serial/io_ti.c

@@ -87,9 +87,6 @@ struct edgeport_port {
 	int close_pending;
 	int lsr_event;
 	struct async_icount	icount;
-	wait_queue_head_t	delta_msr_wait;	/* for handling sleeping while
-						   waiting for msr change to
-						   happen */
 	struct edgeport_serial	*edge_serial;
 	struct usb_serial_port	*port;
 	__u8 bUartMode;		/* Port type, 0: RS232, etc. */
@@ -1459,7 +1456,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 			icount->dcd++;
 		if (msr & EDGEPORT_MSR_DELTA_RI)
 			icount->rng++;
-		wake_up_interruptible(&edge_port->delta_msr_wait);
+		wake_up_interruptible(&edge_port->port->delta_msr_wait);
 	}
 
 	/* Save the new modem status */
@@ -1754,7 +1751,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port)
 	dev = port->serial->dev;
 
 	memset(&(edge_port->icount), 0x00, sizeof(edge_port->icount));
-	init_waitqueue_head(&edge_port->delta_msr_wait);
 
 	/* turn off loopback */
 	status = ti_do_config(edge_port, UMPC_SET_CLR_LOOPBACK, 0);
@@ -2434,10 +2430,14 @@ static int edge_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
 		cprev = edge_port->icount;
 		while (1) {
-			interruptible_sleep_on(&edge_port->delta_msr_wait);
+			interruptible_sleep_on(&port->delta_msr_wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			cnow = edge_port->icount;
 			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
 			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
@@ -2649,6 +2649,7 @@ static struct usb_serial_driver edgeport_2port_device = {
 	.set_termios		= edge_set_termios,
 	.tiocmget		= edge_tiocmget,
 	.tiocmset		= edge_tiocmset,
+	.get_icount		= edge_get_icount,
 	.write			= edge_write,
 	.write_room		= edge_write_room,
 	.chars_in_buffer	= edge_chars_in_buffer,

drivers/usb/serial/mct_u232.c

@@ -114,8 +114,6 @@ struct mct_u232_private {
 	unsigned char	     last_msr;      /* Modem Status Register */
 	unsigned int	     rx_flags;      /* Throttling flags */
 	struct async_icount  icount;
-	wait_queue_head_t    msr_wait;	/* for handling sleeping while waiting
-						for msr change to happen */
 };
 
 #define THROTTLED		0x01
@@ -409,7 +407,6 @@ static int mct_u232_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->msr_wait);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -601,7 +598,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 		tty_kref_put(tty);
 	}
 #endif
-	wake_up_interruptible(&priv->msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 	spin_unlock_irqrestore(&priv->lock, flags);
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -810,13 +807,17 @@ static int  mct_u232_ioctl(struct tty_struct *tty,
 		cprev = mct_u232_port->icount;
 		spin_unlock_irqrestore(&mct_u232_port->lock, flags);
 		for ( ; ; ) {
-			prepare_to_wait(&mct_u232_port->msr_wait,
+			prepare_to_wait(&port->delta_msr_wait,
 					&wait, TASK_INTERRUPTIBLE);
 			schedule();
-			finish_wait(&mct_u232_port->msr_wait, &wait);
+			finish_wait(&port->delta_msr_wait, &wait);
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			spin_lock_irqsave(&mct_u232_port->lock, flags);
 			cnow = mct_u232_port->icount;
 			spin_unlock_irqrestore(&mct_u232_port->lock, flags);

drivers/usb/serial/mos7840.c

@@ -219,7 +219,6 @@ struct moschip_port {
 	char open;
 	char open_ports;
 	wait_queue_head_t wait_chase;	/* for handling sleeping while waiting for chase to finish */
-	wait_queue_head_t delta_msr_wait;	/* for handling sleeping while waiting for msr change to happen */
 	int delta_msr_cond;
 	struct async_icount icount;
 	struct usb_serial_port *port;	/* loop back to the owner of this object */
@@ -423,6 +422,9 @@ static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
 			icount->rng++;
 			smp_wmb();
 		}
+
+		mos7840_port->delta_msr_cond = 1;
+		wake_up_interruptible(&port->port->delta_msr_wait);
 	}
 }
 
@@ -1127,7 +1129,6 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 
 	/* initialize our wait queues */
 	init_waitqueue_head(&mos7840_port->wait_chase);
-	init_waitqueue_head(&mos7840_port->delta_msr_wait);
 
 	/* initialize our icount structure */
 	memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
@@ -2017,8 +2018,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty,
 			mos7840_port->read_urb_busy = false;
 		}
 	}
-	wake_up(&mos7840_port->delta_msr_wait);
-	mos7840_port->delta_msr_cond = 1;
 	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
 		mos7840_port->shadowLCR);
 }
@@ -2219,13 +2218,18 @@ static int mos7840_ioctl(struct tty_struct *tty,
 		while (1) {
 			/* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
 			mos7840_port->delta_msr_cond = 0;
-			wait_event_interruptible(mos7840_port->delta_msr_wait,
-						 (mos7840_port->
+			wait_event_interruptible(port->delta_msr_wait,
+						 (port->serial->disconnected ||
+						  mos7840_port->
 						  delta_msr_cond == 1));
 
 			/* see if a signal did it */
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			cnow = mos7840_port->icount;
 			smp_rmb();
 			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&

drivers/usb/serial/oti6858.c

@@ -188,7 +188,6 @@ struct oti6858_private {
 	u8 setup_done;
 	struct delayed_work delayed_setup_work;
 
-	wait_queue_head_t intr_wait;
 	struct usb_serial_port *port;   /* USB port with which associated */
 };
 
@@ -339,7 +338,6 @@ static int oti6858_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->intr_wait);
 	priv->port = port;
 	INIT_DELAYED_WORK(&priv->delayed_setup_work, setup_line);
 	INIT_DELAYED_WORK(&priv->delayed_write_work, send_data);
@@ -664,11 +662,15 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		wait_event_interruptible(priv->intr_wait,
+		wait_event_interruptible(port->delta_msr_wait,
+					port->serial->disconnected ||
 					priv->status.pin_state != prev);
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->status.pin_state & PIN_MASK;
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -763,7 +765,7 @@ static void oti6858_read_int_callback(struct urb *urb)
 
 		if (!priv->transient) {
 			if (xs->pin_state != priv->status.pin_state)
-				wake_up_interruptible(&priv->intr_wait);
+				wake_up_interruptible(&port->delta_msr_wait);
 			memcpy(&priv->status, xs, OTI6858_CTRL_PKT_SIZE);
 		}
 

drivers/usb/serial/pl2303.c

@@ -139,7 +139,6 @@ struct pl2303_serial_private {
 
 struct pl2303_private {
 	spinlock_t lock;
-	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
 };
@@ -233,7 +232,6 @@ static int pl2303_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -607,11 +605,14 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		interruptible_sleep_on(&priv->delta_msr_wait);
+		interruptible_sleep_on(&port->delta_msr_wait);
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->line_status;
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -719,7 +720,7 @@ static void pl2303_update_line_status(struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->lock, flags);
 	if (priv->line_status & UART_BREAK_ERROR)
 		usb_serial_handle_break(port);
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	tty = tty_port_tty_get(&port->port);
 	if (!tty)
@@ -783,7 +784,7 @@ static void pl2303_process_read_urb(struct urb *urb)
 	line_status = priv->line_status;
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	if (!urb->actual_length)
 		return;

drivers/usb/serial/quatech2.c

@@ -128,7 +128,6 @@ struct qt2_port_private {
 	u8          shadowLSR;
 	u8          shadowMSR;
 
-	wait_queue_head_t   delta_msr_wait; /* Used for TIOCMIWAIT */
 	struct async_icount icount;
 
 	struct usb_serial_port *port;
@@ -506,8 +505,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	while (1) {
-		wait_event_interruptible(priv->delta_msr_wait,
-					 ((priv->icount.rng != prev.rng) ||
+		wait_event_interruptible(port->delta_msr_wait,
+					 (port->serial->disconnected ||
+					  (priv->icount.rng != prev.rng) ||
 					  (priv->icount.dsr != prev.dsr) ||
 					  (priv->icount.dcd != prev.dcd) ||
 					  (priv->icount.cts != prev.cts)));
@@ -515,6 +515,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		cur = priv->icount;
 		spin_unlock_irqrestore(&priv->lock, flags);
@@ -827,7 +830,6 @@ static int qt2_port_probe(struct usb_serial_port *port)
 
 	spin_lock_init(&port_priv->lock);
 	spin_lock_init(&port_priv->urb_lock);
-	init_waitqueue_head(&port_priv->delta_msr_wait);
 	port_priv->port = port;
 
 	port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
@@ -970,7 +972,7 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
 		if (newMSR & UART_MSR_TERI)
 			port_priv->icount.rng++;
 
-		wake_up_interruptible(&port_priv->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
 }
 

drivers/usb/serial/spcp8x5.c

@@ -149,7 +149,6 @@ enum spcp8x5_type {
 struct spcp8x5_private {
 	spinlock_t 	lock;
 	enum spcp8x5_type	type;
-	wait_queue_head_t	delta_msr_wait;
 	u8 			line_control;
 	u8 			line_status;
 };
@@ -179,7 +178,6 @@ static int spcp8x5_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 	priv->type = type;
 
 	usb_set_serial_port_data(port , priv);
@@ -475,7 +473,7 @@ static void spcp8x5_process_read_urb(struct urb *urb)
 	priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
 	spin_unlock_irqrestore(&priv->lock, flags);
 	/* wake up the wait for termios */
-	wake_up_interruptible(&priv->delta_msr_wait);
+	wake_up_interruptible(&port->delta_msr_wait);
 
 	if (!urb->actual_length)
 		return;
@@ -526,12 +524,15 @@ static int spcp8x5_wait_modem_info(struct usb_serial_port *port,
 
 	while (1) {
 		/* wake up in bulk read */
-		interruptible_sleep_on(&priv->delta_msr_wait);
+		interruptible_sleep_on(&port->delta_msr_wait);
 
 		/* see if a signal did it */
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->lock, flags);
 		status = priv->line_status;
 		spin_unlock_irqrestore(&priv->lock, flags);

drivers/usb/serial/ssu100.c

@@ -61,7 +61,6 @@ struct ssu100_port_private {
 	spinlock_t status_lock;
 	u8 shadowLSR;
 	u8 shadowMSR;
-	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
 	struct async_icount icount;
 };
 
@@ -355,8 +354,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 	spin_unlock_irqrestore(&priv->status_lock, flags);
 
 	while (1) {
-		wait_event_interruptible(priv->delta_msr_wait,
-					 ((priv->icount.rng != prev.rng) ||
+		wait_event_interruptible(port->delta_msr_wait,
+					 (port->serial->disconnected ||
+					  (priv->icount.rng != prev.rng) ||
 					  (priv->icount.dsr != prev.dsr) ||
 					  (priv->icount.dcd != prev.dcd) ||
 					  (priv->icount.cts != prev.cts)));
@@ -364,6 +364,9 @@ static int wait_modem_info(struct usb_serial_port *port, unsigned int arg)
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
+		if (port->serial->disconnected)
+			return -EIO;
+
 		spin_lock_irqsave(&priv->status_lock, flags);
 		cur = priv->icount;
 		spin_unlock_irqrestore(&priv->status_lock, flags);
@@ -445,7 +448,6 @@ static int ssu100_port_probe(struct usb_serial_port *port)
 		return -ENOMEM;
 
 	spin_lock_init(&priv->status_lock);
-	init_waitqueue_head(&priv->delta_msr_wait);
 
 	usb_set_serial_port_data(port, priv);
 
@@ -537,7 +539,7 @@ static void ssu100_update_msr(struct usb_serial_port *port, u8 msr)
 			priv->icount.dcd++;
 		if (msr & UART_MSR_TERI)
 			priv->icount.rng++;
-		wake_up_interruptible(&priv->delta_msr_wait);
+		wake_up_interruptible(&port->delta_msr_wait);
 	}
 }
 

drivers/usb/serial/ti_usb_3410_5052.c

@@ -74,7 +74,6 @@ struct ti_port {
 	int			tp_flags;
 	int			tp_closing_wait;/* in .01 secs */
 	struct async_icount	tp_icount;
-	wait_queue_head_t	tp_msr_wait;	/* wait for msr change */
 	wait_queue_head_t	tp_write_wait;
 	struct ti_device	*tp_tdev;
 	struct usb_serial_port	*tp_port;
@@ -432,7 +431,6 @@ static int ti_port_probe(struct usb_serial_port *port)
 	else
 		tport->tp_uart_base_addr = TI_UART2_BASE_ADDR;
 	tport->tp_closing_wait = closing_wait;
-	init_waitqueue_head(&tport->tp_msr_wait);
 	init_waitqueue_head(&tport->tp_write_wait);
 	if (kfifo_alloc(&tport->write_fifo, TI_WRITE_BUF_SIZE, GFP_KERNEL)) {
 		kfree(tport);
@@ -784,9 +782,13 @@ static int ti_ioctl(struct tty_struct *tty,
 		dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__);
 		cprev = tport->tp_icount;
 		while (1) {
-			interruptible_sleep_on(&tport->tp_msr_wait);
+			interruptible_sleep_on(&port->delta_msr_wait);
 			if (signal_pending(current))
 				return -ERESTARTSYS;
+
+			if (port->serial->disconnected)
+				return -EIO;
+
 			cnow = tport->tp_icount;
 			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
 			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
@@ -1392,7 +1394,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 			icount->dcd++;
 		if (msr & TI_MSR_DELTA_RI)
 			icount->rng++;
-		wake_up_interruptible(&tport->tp_msr_wait);
+		wake_up_interruptible(&tport->tp_port->delta_msr_wait);
 		spin_unlock_irqrestore(&tport->tp_lock, flags);
 	}
 

drivers/usb/serial/usb-serial.c

@@ -151,6 +151,7 @@ static void destroy_serial(struct kref *kref)
 		}
 	}
 
+	usb_put_intf(serial->interface);
 	usb_put_dev(serial->dev);
 	kfree(serial);
 }
@@ -620,7 +621,7 @@ static struct usb_serial *create_serial(struct usb_device *dev,
 	}
 	serial->dev = usb_get_dev(dev);
 	serial->type = driver;
-	serial->interface = interface;
+	serial->interface = usb_get_intf(interface);
 	kref_init(&serial->kref);
 	mutex_init(&serial->disc_mutex);
 	serial->minor = SERIAL_TTY_NO_MINOR;

drivers/usb/storage/unusual_devs.h

@@ -496,6 +496,13 @@ UNUSUAL_DEV(  0x04e8, 0x5122, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 | US_FL_BULK_IGNORE_TAG),
 
+/* Added by Dmitry Artamonow <mad_soft@inbox.ru> */
+UNUSUAL_DEV(  0x04e8, 0x5136, 0x0000, 0x9999,
+		"Samsung",
+		"YP-Z3",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64),
+
 /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
  * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
  * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.

include/linux/usb/serial.h

@@ -66,6 +66,7 @@
  *	port.
  * @flags: usb serial port flags
  * @write_wait: a wait_queue_head_t used by the port.
+ * @delta_msr_wait: modem-status-change wait queue
  * @work: work queue entry for the line discipline waking up.
  * @throttled: nonzero if the read urb is inactive to throttle the device
  * @throttle_req: nonzero if the tty wants to throttle us
@@ -112,6 +113,7 @@ struct usb_serial_port {
 
 	unsigned long		flags;
 	wait_queue_head_t	write_wait;
+	wait_queue_head_t	delta_msr_wait;
 	struct work_struct	work;
 	char			throttled;
 	char			throttle_req;

include/linux/usb/ulpi.h

@@ -181,8 +181,16 @@
 
 /*-------------------------------------------------------------------------*/
 
+#if IS_ENABLED(CONFIG_USB_ULPI)
 struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
 					unsigned int flags);
+#else
+static inline struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
+					      unsigned int flags)
+{
+	return NULL;
+}
+#endif
 
 #ifdef CONFIG_USB_ULPI_VIEWPORT
 /* access ops for controllers with a viewport register */