[SCSI] aacraid: add optional MSI support

Added support for MSI utilizing the aacraid.msi=1 parameter. This
patch adds some localized or like-minded janitor fixes. Since the
default is disabled, there is no impact on the code paths unless the
customer wishes to experiment with the MSI performance.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/aacraid/aachba.c

@@ -144,51 +144,77 @@ static char *aac_get_status_string(u32 status);
  */
 
 static int nondasd = -1;
-static int aac_cache = 0;
+static int aac_cache;
 static int dacmode = -1;
-
+int aac_msi;
 int aac_commit = -1;
 int startup_timeout = 180;
 int aif_timeout = 120;
 
 module_param(nondasd, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices. 0=off, 1=on");
+MODULE_PARM_DESC(nondasd, "Control scanning of hba for nondasd devices."
+	" 0=off, 1=on");
 module_param_named(cache, aac_cache, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n\tbit 0 - Disable FUA in WRITE SCSI commands\n\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n\tbit 2 - Disable only if Battery not protecting Cache");
+MODULE_PARM_DESC(cache, "Disable Queue Flush commands:\n"
+	"\tbit 0 - Disable FUA in WRITE SCSI commands\n"
+	"\tbit 1 - Disable SYNCHRONIZE_CACHE SCSI command\n"
+	"\tbit 2 - Disable only if Battery not protecting Cache");
 module_param(dacmode, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC. 0=off, 1=on");
+MODULE_PARM_DESC(dacmode, "Control whether dma addressing is using 64 bit DAC."
+	" 0=off, 1=on");
 module_param_named(commit, aac_commit, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays.\nThis is typically needed in systems that do not have a BIOS. 0=off, 1=on");
+MODULE_PARM_DESC(commit, "Control whether a COMMIT_CONFIG is issued to the"
+	" adapter for foreign arrays.\n"
+	"This is typically needed in systems that do not have a BIOS."
+	" 0=off, 1=on");
+module_param_named(msi, aac_msi, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(msi, "IRQ handling."
+	" 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI)");
 module_param(startup_timeout, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for adapter to have it's kernel up and\nrunning. This is typically adjusted for large systems that do not have a BIOS.");
+MODULE_PARM_DESC(startup_timeout, "The duration of time in seconds to wait for"
+	" adapter to have it's kernel up and\n"
+	"running. This is typically adjusted for large systems that do not"
+	" have a BIOS.");
 module_param(aif_timeout, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for applications to pick up AIFs before\nderegistering them. This is typically adjusted for heavily burdened systems.");
+MODULE_PARM_DESC(aif_timeout, "The duration of time in seconds to wait for"
+	" applications to pick up AIFs before\n"
+	"deregistering them. This is typically adjusted for heavily burdened"
+	" systems.");
 
 int numacb = -1;
 module_param(numacb, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware.");
+MODULE_PARM_DESC(numacb, "Request a limit to the number of adapter control"
+	" blocks (FIB) allocated. Valid values are 512 and down. Default is"
+	" to use suggestion from Firmware.");
 
 int acbsize = -1;
 module_param(acbsize, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware.");
+MODULE_PARM_DESC(acbsize, "Request a specific adapter control block (FIB)"
+	" size. Valid values are 512, 2048, 4096 and 8192. Default is to use"
+	" suggestion from Firmware.");
 
 int update_interval = 30 * 60;
 module_param(update_interval, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync updates issued to adapter.");
+MODULE_PARM_DESC(update_interval, "Interval in seconds between time sync"
+	" updates issued to adapter.");
 
 int check_interval = 24 * 60 * 60;
 module_param(check_interval, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health checks.");
+MODULE_PARM_DESC(check_interval, "Interval in seconds between adapter health"
+	" checks.");
 
 int aac_check_reset = 1;
 module_param_named(check_reset, aac_check_reset, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it.");
+MODULE_PARM_DESC(aac_check_reset, "If adapter fails health check, reset the"
+	" adapter. a value of -1 forces the reset to adapters programmed to"
+	" ignore it.");
 
 int expose_physicals = -1;
 module_param(expose_physicals, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays. -1=protect 0=off, 1=on");
+MODULE_PARM_DESC(expose_physicals, "Expose physical components of the arrays."
+	" -1=protect 0=off, 1=on");
 
-int aac_reset_devices = 0;
+int aac_reset_devices;
 module_param_named(reset_devices, aac_reset_devices, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(reset_devices, "Force an adapter reset at initialization.");
 

drivers/scsi/aacraid/aacraid.h

@@ -1026,6 +1026,7 @@ struct aac_dev
 	u8			raw_io_64;
 	u8			printf_enabled;
 	u8			in_reset;
+	u8			msi;
 };
 
 #define aac_adapter_interrupt(dev) \
@@ -1881,6 +1882,7 @@ extern int startup_timeout;
 extern int aif_timeout;
 extern int expose_physicals;
 extern int aac_reset_devices;
+extern int aac_msi;
 extern int aac_commit;
 extern int update_interval;
 extern int check_interval;

drivers/scsi/aacraid/linit.c

@@ -275,9 +275,9 @@ static const char *aac_info(struct Scsi_Host *shost)
 
 /**
  *	aac_get_driver_ident
- * 	@devtype: index into lookup table
+ *	@devtype: index into lookup table
  *
- * 	Returns a pointer to the entry in the driver lookup table.
+ *	Returns a pointer to the entry in the driver lookup table.
  */
 
 struct aac_driver_ident* aac_get_driver_ident(int devtype)
@@ -1004,32 +1004,32 @@ static const struct file_operations aac_cfg_fops = {
 
 static struct scsi_host_template aac_driver_template = {
 	.module				= THIS_MODULE,
-	.name           		= "AAC",
+	.name				= "AAC",
 	.proc_name			= AAC_DRIVERNAME,
-	.info           		= aac_info,
-	.ioctl          		= aac_ioctl,
+	.info				= aac_info,
+	.ioctl				= aac_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl			= aac_compat_ioctl,
 #endif
-	.queuecommand   		= aac_queuecommand,
-	.bios_param     		= aac_biosparm,
+	.queuecommand			= aac_queuecommand,
+	.bios_param			= aac_biosparm,
 	.shost_attrs			= aac_attrs,
 	.slave_configure		= aac_slave_configure,
 	.change_queue_depth		= aac_change_queue_depth,
 	.sdev_attrs			= aac_dev_attrs,
 	.eh_abort_handler		= aac_eh_abort,
 	.eh_host_reset_handler		= aac_eh_reset,
-	.can_queue      		= AAC_NUM_IO_FIB,
-	.this_id        		= MAXIMUM_NUM_CONTAINERS,
-	.sg_tablesize   		= 16,
-	.max_sectors    		= 128,
+	.can_queue			= AAC_NUM_IO_FIB,
+	.this_id			= MAXIMUM_NUM_CONTAINERS,
+	.sg_tablesize			= 16,
+	.max_sectors			= 128,
 #if (AAC_NUM_IO_FIB > 256)
 	.cmd_per_lun			= 256,
 #else
-	.cmd_per_lun    		= AAC_NUM_IO_FIB,
+	.cmd_per_lun			= AAC_NUM_IO_FIB,
 #endif
 	.use_clustering			= ENABLE_CLUSTERING,
-	.emulated                       = 1,
+	.emulated			= 1,
 };
 
 static void __aac_shutdown(struct aac_dev * aac)
@@ -1039,6 +1039,8 @@ static void __aac_shutdown(struct aac_dev * aac)
 	aac_send_shutdown(aac);
 	aac_adapter_disable_int(aac);
 	free_irq(aac->pdev->irq, aac);
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
 }
 
 static int __devinit aac_probe_one(struct pci_dev *pdev,
@@ -1254,7 +1256,7 @@ static struct pci_driver aac_pci_driver = {
 	.id_table	= aac_pci_tbl,
 	.probe		= aac_probe_one,
 	.remove		= __devexit_p(aac_remove_one),
-	.shutdown 	= aac_shutdown,
+	.shutdown	= aac_shutdown,
 };
 
 static int __init aac_init(void)
@@ -1271,7 +1273,7 @@ static int __init aac_init(void)
 	aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
 	if (aac_cfg_major < 0) {
 		printk(KERN_WARNING
-		       "aacraid: unable to register \"aac\" device.\n");
+			"aacraid: unable to register \"aac\" device.\n");
 	}
 
 	return 0;

drivers/scsi/aacraid/rx.c

@@ -625,8 +625,11 @@ int _aac_rx_init(struct aac_dev *dev)
 	if (aac_init_adapter(dev) == NULL)
 		goto error_iounmap;
 	aac_adapter_comm(dev, dev->comm_interface);
-	if (request_irq(dev->scsi_host_ptr->irq, dev->a_ops.adapter_intr,
+	dev->msi = aac_msi && !pci_enable_msi(dev->pdev);
+	if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
 			IRQF_SHARED|IRQF_DISABLED, "aacraid", dev) < 0) {
+		if (dev->msi)
+			pci_disable_msi(dev->pdev);
 		printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
 			name, instance);
 		goto error_iounmap;

drivers/scsi/aacraid/sa.c

@@ -31,6 +31,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/types.h>
+#include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
@@ -385,7 +386,7 @@ int aac_sa_init(struct aac_dev *dev)
 
 	if(aac_init_adapter(dev) == NULL)
 		goto error_irq;
-	if (request_irq(dev->scsi_host_ptr->irq, dev->a_ops.adapter_intr,
+	if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
 			IRQF_SHARED|IRQF_DISABLED,
 			"aacraid", (void *)dev ) < 0) {
 		printk(KERN_WARNING "%s%d: Interrupt unavailable.\n",
@@ -403,7 +404,7 @@ int aac_sa_init(struct aac_dev *dev)
 
 error_irq:
 	aac_sa_disable_interrupt(dev);
-	free_irq(dev->scsi_host_ptr->irq, (void *)dev);
+	free_irq(dev->pdev->irq, (void *)dev);
 
 error_iounmap: