MIPS: Lantiq: add SoC specific code for XWAY family

Add support for the Lantiq XWAY family of Mips24KEc SoCs.

* Danube (PSB50702)
* Twinpass (PSB4000)
* AR9 (PSB50802)
* Amazon SE (PSB5061)

The Amazon SE is a lightweight SoC and has no PCI as well as a different
clock. We split the code out into seperate files to handle this.

The GPIO pins on the SoCs are multi function and there are several bits
we can use to configure the pins. To be as compatible as possible to
GPIOLIB we add a function

int lq_gpio_request(unsigned int pin, unsigned int alt0,
        unsigned int alt1, unsigned int dir, const char *name);

which lets you configure the 2 "alternate function" bits. This way drivers like
PCI can make use of GPIOLIB without a cubersome wrapper.

The PLL code inside arch/mips/lantiq/xway/clk-xway.c is voodoo to me. It was
taken from a 2.4.20 source tree and was never really changed by me since then.

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2249/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -787,6 +787,7 @@ source "arch/mips/ath79/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
+source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/powertv/Kconfig"

arch/mips/include/asm/mach-lantiq/xway/irq.h

@@ -0,0 +1,18 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef __LANTIQ_IRQ_H
+#define __LANTIQ_IRQ_H
+
+#include <lantiq_irq.h>
+
+#define NR_IRQS 256
+
+#include_next <irq.h>
+
+#endif

arch/mips/include/asm/mach-lantiq/xway/lantiq_irq.h

@@ -0,0 +1,66 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LANTIQ_XWAY_IRQ_H__
+#define _LANTIQ_XWAY_IRQ_H__
+
+#define INT_NUM_IRQ0		8
+#define INT_NUM_IM0_IRL0	(INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0	(INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0	(INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0	(INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0	(INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET	(INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define LTQ_ASC_TIR(x)		(INT_NUM_IM3_IRL0 + (x * 8))
+#define LTQ_ASC_RIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 1)
+#define LTQ_ASC_EIR(x)		(INT_NUM_IM3_IRL0 + (x * 8) + 2)
+
+#define LTQ_ASC_ASE_TIR		INT_NUM_IM2_IRL0
+#define LTQ_ASC_ASE_RIR		(INT_NUM_IM2_IRL0 + 2)
+#define LTQ_ASC_ASE_EIR		(INT_NUM_IM2_IRL0 + 3)
+
+#define LTQ_SSC_TIR		(INT_NUM_IM0_IRL0 + 15)
+#define LTQ_SSC_RIR		(INT_NUM_IM0_IRL0 + 14)
+#define LTQ_SSC_EIR		(INT_NUM_IM0_IRL0 + 16)
+
+#define LTQ_MEI_DYING_GASP_INT	(INT_NUM_IM1_IRL0 + 21)
+#define LTQ_MEI_INT		(INT_NUM_IM1_IRL0 + 23)
+
+#define LTQ_TIMER6_INT		(INT_NUM_IM1_IRL0 + 23)
+#define LTQ_USB_INT		(INT_NUM_IM1_IRL0 + 22)
+#define LTQ_USB_OC_INT		(INT_NUM_IM4_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ		7
+
+#define LTQ_DMA_CH0_INT		(INT_NUM_IM2_IRL0)
+#define LTQ_DMA_CH1_INT		(INT_NUM_IM2_IRL0 + 1)
+#define LTQ_DMA_CH2_INT		(INT_NUM_IM2_IRL0 + 2)
+#define LTQ_DMA_CH3_INT		(INT_NUM_IM2_IRL0 + 3)
+#define LTQ_DMA_CH4_INT		(INT_NUM_IM2_IRL0 + 4)
+#define LTQ_DMA_CH5_INT		(INT_NUM_IM2_IRL0 + 5)
+#define LTQ_DMA_CH6_INT		(INT_NUM_IM2_IRL0 + 6)
+#define LTQ_DMA_CH7_INT		(INT_NUM_IM2_IRL0 + 7)
+#define LTQ_DMA_CH8_INT		(INT_NUM_IM2_IRL0 + 8)
+#define LTQ_DMA_CH9_INT		(INT_NUM_IM2_IRL0 + 9)
+#define LTQ_DMA_CH10_INT	(INT_NUM_IM2_IRL0 + 10)
+#define LTQ_DMA_CH11_INT	(INT_NUM_IM2_IRL0 + 11)
+#define LTQ_DMA_CH12_INT	(INT_NUM_IM2_IRL0 + 25)
+#define LTQ_DMA_CH13_INT	(INT_NUM_IM2_IRL0 + 26)
+#define LTQ_DMA_CH14_INT	(INT_NUM_IM2_IRL0 + 27)
+#define LTQ_DMA_CH15_INT	(INT_NUM_IM2_IRL0 + 28)
+#define LTQ_DMA_CH16_INT	(INT_NUM_IM2_IRL0 + 29)
+#define LTQ_DMA_CH17_INT	(INT_NUM_IM2_IRL0 + 30)
+#define LTQ_DMA_CH18_INT	(INT_NUM_IM2_IRL0 + 16)
+#define LTQ_DMA_CH19_INT	(INT_NUM_IM2_IRL0 + 21)
+
+#define LTQ_PPE_MBOX_INT	(INT_NUM_IM2_IRL0 + 24)
+
+#define INT_NUM_IM4_IRL14	(INT_NUM_IM4_IRL0 + 14)
+
+#endif

arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h

@@ -0,0 +1,140 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#ifndef _LTQ_XWAY_H__
+#define _LTQ_XWAY_H__
+
+#ifdef CONFIG_SOC_TYPE_XWAY
+
+#include <lantiq.h>
+
+/* Chip IDs */
+#define SOC_ID_DANUBE1		0x129
+#define SOC_ID_DANUBE2		0x12B
+#define SOC_ID_TWINPASS		0x12D
+#define SOC_ID_AMAZON_SE	0x152
+#define SOC_ID_ARX188		0x16C
+#define SOC_ID_ARX168		0x16D
+#define SOC_ID_ARX182		0x16F
+
+/* SoC Types */
+#define SOC_TYPE_DANUBE		0x01
+#define SOC_TYPE_TWINPASS	0x02
+#define SOC_TYPE_AR9		0x03
+#define SOC_TYPE_VR9		0x04
+#define SOC_TYPE_AMAZON_SE	0x05
+
+/* ASC0/1 - serial port */
+#define LTQ_ASC0_BASE_ADDR	0x1E100400
+#define LTQ_ASC1_BASE_ADDR	0x1E100C00
+#define LTQ_ASC_SIZE		0x400
+
+/* RCU - reset control unit */
+#define LTQ_RCU_BASE_ADDR	0x1F203000
+#define LTQ_RCU_SIZE		0x1000
+
+/* GPTU - general purpose timer unit */
+#define LTQ_GPTU_BASE_ADDR	0x18000300
+#define LTQ_GPTU_SIZE		0x100
+
+/* EBU - external bus unit */
+#define LTQ_EBU_GPIO_START	0x14000000
+#define LTQ_EBU_GPIO_SIZE	0x1000
+
+#define LTQ_EBU_BASE_ADDR	0x1E105300
+#define LTQ_EBU_SIZE		0x100
+
+#define LTQ_EBU_BUSCON0		0x0060
+#define LTQ_EBU_PCC_CON		0x0090
+#define LTQ_EBU_PCC_IEN		0x00A4
+#define LTQ_EBU_PCC_ISTAT	0x00A0
+#define LTQ_EBU_BUSCON1		0x0064
+#define LTQ_EBU_ADDRSEL1	0x0024
+#define EBU_WRDIS		0x80000000
+
+/* CGU - clock generation unit */
+#define LTQ_CGU_BASE_ADDR	0x1F103000
+#define LTQ_CGU_SIZE		0x1000
+
+/* ICU - interrupt control unit */
+#define LTQ_ICU_BASE_ADDR	0x1F880200
+#define LTQ_ICU_SIZE		0x100
+
+/* EIU - external interrupt unit */
+#define LTQ_EIU_BASE_ADDR	0x1F101000
+#define LTQ_EIU_SIZE		0x1000
+
+/* PMU - power management unit */
+#define LTQ_PMU_BASE_ADDR	0x1F102000
+#define LTQ_PMU_SIZE		0x1000
+
+#define PMU_DMA			0x0020
+#define PMU_USB			0x8041
+#define PMU_LED			0x0800
+#define PMU_GPT			0x1000
+#define PMU_PPE			0x2000
+#define PMU_FPI			0x4000
+#define PMU_SWITCH		0x10000000
+
+/* ETOP - ethernet */
+#define LTQ_PPE32_BASE_ADDR	0xBE180000
+#define LTQ_PPE32_SIZE		0x40000
+
+/* DMA */
+#define LTQ_DMA_BASE_ADDR	0xBE104100
+
+/* PCI */
+#define PCI_CR_BASE_ADDR	0x1E105400
+#define PCI_CR_SIZE		0x400
+
+/* WDT */
+#define LTQ_WDT_BASE_ADDR	0x1F8803F0
+#define LTQ_WDT_SIZE		0x10
+
+/* STP - serial to parallel conversion unit */
+#define LTQ_STP_BASE_ADDR	0x1E100BB0
+#define LTQ_STP_SIZE		0x40
+
+/* GPIO */
+#define LTQ_GPIO0_BASE_ADDR	0x1E100B10
+#define LTQ_GPIO1_BASE_ADDR	0x1E100B40
+#define LTQ_GPIO2_BASE_ADDR	0x1E100B70
+#define LTQ_GPIO_SIZE		0x30
+
+/* SSC */
+#define LTQ_SSC_BASE_ADDR	0x1e100800
+#define LTQ_SSC_SIZE		0x100
+
+/* MEI - dsl core */
+#define LTQ_MEI_BASE_ADDR	0x1E116000
+
+/* DEU - data encryption unit */
+#define LTQ_DEU_BASE_ADDR	0x1E103100
+
+/* MPS - multi processor unit (voice) */
+#define LTQ_MPS_BASE_ADDR	(KSEG1 + 0x1F107000)
+#define LTQ_MPS_CHIPID		((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
+
+/* request a non-gpio and set the PIO config */
+extern int  ltq_gpio_request(unsigned int pin, unsigned int alt0,
+	unsigned int alt1, unsigned int dir, const char *name);
+extern void ltq_pmu_enable(unsigned int module);
+extern void ltq_pmu_disable(unsigned int module);
+
+static inline int ltq_is_ar9(void)
+{
+	return (ltq_get_soc_type() == SOC_TYPE_AR9);
+}
+
+static inline int ltq_is_vr9(void)
+{
+	return (ltq_get_soc_type() == SOC_TYPE_VR9);
+}
+
+#endif /* CONFIG_SOC_TYPE_XWAY */
+#endif /* _LTQ_XWAY_H__ */

arch/mips/lantiq/Kconfig

@@ -0,0 +1,21 @@
+if LANTIQ
+
+config SOC_TYPE_XWAY
+	bool
+	default n
+
+choice
+	prompt "SoC Type"
+	default SOC_XWAY
+
+config SOC_AMAZON_SE
+	bool "Amazon SE"
+	select SOC_TYPE_XWAY
+
+config SOC_XWAY
+	bool "XWAY"
+	select SOC_TYPE_XWAY
+	select HW_HAS_PCI
+endchoice
+
+endif

arch/mips/lantiq/Makefile

@@ -7,3 +7,5 @@
 obj-y := irq.o setup.o clk.o prom.o
 
 obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_TYPE_XWAY) += xway/

arch/mips/lantiq/Platform

@@ -5,3 +5,4 @@
 platform-$(CONFIG_LANTIQ)	+= lantiq/
 cflags-$(CONFIG_LANTIQ)		+= -I$(srctree)/arch/mips/include/asm/mach-lantiq
 load-$(CONFIG_LANTIQ)		= 0xffffffff80002000
+cflags-$(CONFIG_SOC_TYPE_XWAY)	+= -I$(srctree)/arch/mips/include/asm/mach-lantiq/xway

arch/mips/lantiq/xway/Makefile

@@ -0,0 +1,4 @@
+obj-y := pmu.o ebu.o reset.o gpio.o
+
+obj-$(CONFIG_SOC_XWAY) += clk-xway.o prom-xway.o
+obj-$(CONFIG_SOC_AMAZON_SE) += clk-ase.o prom-ase.o

arch/mips/lantiq/xway/clk-ase.c

@@ -0,0 +1,48 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+/* cgu registers */
+#define LTQ_CGU_SYS	0x0010
+
+unsigned int ltq_get_io_region_clock(void)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+	if (ltq_cgu_r32(LTQ_CGU_SYS) & (1 << 5))
+		return CLOCK_266M;
+	else
+		return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+	return CLOCK_133M;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);

arch/mips/lantiq/xway/clk-xway.c

@@ -0,0 +1,223 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/time.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+
+#include <lantiq_soc.h>
+
+static unsigned int ltq_ram_clocks[] = {
+	CLOCK_167M, CLOCK_133M, CLOCK_111M, CLOCK_83M };
+#define DDR_HZ ltq_ram_clocks[ltq_cgu_r32(LTQ_CGU_SYS) & 0x3]
+
+#define BASIC_FREQUENCY_1	35328000
+#define BASIC_FREQUENCY_2	36000000
+#define BASIS_REQUENCY_USB	12000000
+
+#define GET_BITS(x, msb, lsb) \
+	(((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb))
+
+#define LTQ_CGU_PLL0_CFG	0x0004
+#define LTQ_CGU_PLL1_CFG	0x0008
+#define LTQ_CGU_PLL2_CFG	0x000C
+#define LTQ_CGU_SYS		0x0010
+#define LTQ_CGU_UPDATE		0x0014
+#define LTQ_CGU_IF_CLK		0x0018
+#define LTQ_CGU_OSC_CON		0x001C
+#define LTQ_CGU_SMD		0x0020
+#define LTQ_CGU_CT1SR		0x0028
+#define LTQ_CGU_CT2SR		0x002C
+#define LTQ_CGU_PCMCR		0x0030
+#define LTQ_CGU_PCI_CR		0x0034
+#define LTQ_CGU_PD_PC		0x0038
+#define LTQ_CGU_FMR		0x003C
+
+#define CGU_PLL0_PHASE_DIVIDER_ENABLE	\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 31))
+#define CGU_PLL0_BYPASS			\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 30))
+#define CGU_PLL0_CFG_DSMSEL		\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 28))
+#define CGU_PLL0_CFG_FRAC_EN		\
+	(ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & (1 << 27))
+#define CGU_PLL1_SRC			\
+	(ltq_cgu_r32(LTQ_CGU_PLL1_CFG) & (1 << 31))
+#define CGU_PLL2_PHASE_DIVIDER_ENABLE	\
+	(ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & (1 << 20))
+#define CGU_SYS_FPI_SEL			(1 << 6)
+#define CGU_SYS_DDR_SEL			0x3
+#define CGU_PLL0_SRC			(1 << 29)
+
+#define CGU_PLL0_CFG_PLLK	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 26, 17)
+#define CGU_PLL0_CFG_PLLN	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 12, 6)
+#define CGU_PLL0_CFG_PLLM	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL0_CFG), 5, 2)
+#define CGU_PLL2_SRC		GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 18, 17)
+#define CGU_PLL2_CFG_INPUT_DIV	GET_BITS(ltq_cgu_r32(LTQ_CGU_PLL2_CFG), 16, 13)
+
+static unsigned int ltq_get_pll0_fdiv(void);
+
+static inline unsigned int get_input_clock(int pll)
+{
+	switch (pll) {
+	case 0:
+		if (ltq_cgu_r32(LTQ_CGU_PLL0_CFG) & CGU_PLL0_SRC)
+			return BASIS_REQUENCY_USB;
+		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			return BASIC_FREQUENCY_1;
+		else
+			return BASIC_FREQUENCY_2;
+	case 1:
+		if (CGU_PLL1_SRC)
+			return BASIS_REQUENCY_USB;
+		else if (CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			return BASIC_FREQUENCY_1;
+		else
+			return BASIC_FREQUENCY_2;
+	case 2:
+		switch (CGU_PLL2_SRC) {
+		case 0:
+			return ltq_get_pll0_fdiv();
+		case 1:
+			return CGU_PLL2_PHASE_DIVIDER_ENABLE ?
+				BASIC_FREQUENCY_1 :
+				BASIC_FREQUENCY_2;
+		case 2:
+			return BASIS_REQUENCY_USB;
+		}
+	default:
+		return 0;
+	}
+}
+
+static inline unsigned int cal_dsm(int pll, unsigned int num, unsigned int den)
+{
+	u64 res, clock = get_input_clock(pll);
+
+	res = num * clock;
+	do_div(res, den);
+	return res;
+}
+
+static inline unsigned int mash_dsm(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = ((N + 1) << 10) + K;
+	unsigned int den = (M + 1) << 10;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_1(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = ((N + 1) << 11) + K + 512;
+	unsigned int den = (M + 1) << 11;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int ssff_dsm_2(int pll, unsigned int M, unsigned int N,
+	unsigned int K)
+{
+	unsigned int num = K >= 512 ?
+		((N + 1) << 12) + K - 512 : ((N + 1) << 12) + K + 3584;
+	unsigned int den = (M + 1) << 12;
+
+	return cal_dsm(pll, num, den);
+}
+
+static inline unsigned int dsm(int pll, unsigned int M, unsigned int N,
+	unsigned int K, unsigned int dsmsel, unsigned int phase_div_en)
+{
+	if (!dsmsel)
+		return mash_dsm(pll, M, N, K);
+	else if (!phase_div_en)
+		return mash_dsm(pll, M, N, K);
+	else
+		return ssff_dsm_2(pll, M, N, K);
+}
+
+static inline unsigned int ltq_get_pll0_fosc(void)
+{
+	if (CGU_PLL0_BYPASS)
+		return get_input_clock(0);
+	else
+		return !CGU_PLL0_CFG_FRAC_EN
+			? dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN, 0,
+				CGU_PLL0_CFG_DSMSEL,
+				CGU_PLL0_PHASE_DIVIDER_ENABLE)
+			: dsm(0, CGU_PLL0_CFG_PLLM, CGU_PLL0_CFG_PLLN,
+				CGU_PLL0_CFG_PLLK, CGU_PLL0_CFG_DSMSEL,
+				CGU_PLL0_PHASE_DIVIDER_ENABLE);
+}
+
+static unsigned int ltq_get_pll0_fdiv(void)
+{
+	unsigned int div = CGU_PLL2_CFG_INPUT_DIV + 1;
+
+	return (ltq_get_pll0_fosc() + (div >> 1)) / div;
+}
+
+unsigned int ltq_get_io_region_clock(void)
+{
+	unsigned int ret = ltq_get_pll0_fosc();
+
+	switch (ltq_cgu_r32(LTQ_CGU_PLL2_CFG) & CGU_SYS_DDR_SEL) {
+	default:
+	case 0:
+		return (ret + 1) / 2;
+	case 1:
+		return (ret * 2 + 2) / 5;
+	case 2:
+		return (ret + 1) / 3;
+	case 3:
+		return (ret + 2) / 4;
+	}
+}
+EXPORT_SYMBOL(ltq_get_io_region_clock);
+
+unsigned int ltq_get_fpi_bus_clock(int fpi)
+{
+	unsigned int ret = ltq_get_io_region_clock();
+
+	if ((fpi == 2) && (ltq_cgu_r32(LTQ_CGU_SYS) & CGU_SYS_FPI_SEL))
+		ret >>= 1;
+	return ret;
+}
+EXPORT_SYMBOL(ltq_get_fpi_bus_clock);
+
+unsigned int ltq_get_cpu_hz(void)
+{
+	switch (ltq_cgu_r32(LTQ_CGU_SYS) & 0xc) {
+	case 0:
+		return CLOCK_333M;
+	case 4:
+		return DDR_HZ;
+	case 8:
+		return DDR_HZ << 1;
+	default:
+		return DDR_HZ >> 1;
+	}
+}
+EXPORT_SYMBOL(ltq_get_cpu_hz);
+
+unsigned int ltq_get_fpi_hz(void)
+{
+	unsigned int ddr_clock = DDR_HZ;
+
+	if (ltq_cgu_r32(LTQ_CGU_SYS) & 0x40)
+		return ddr_clock >> 1;
+	return ddr_clock;
+}
+EXPORT_SYMBOL(ltq_get_fpi_hz);

arch/mips/lantiq/xway/ebu.c

@@ -0,0 +1,53 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  EBU - the external bus unit attaches PCI, NOR and NAND
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* all access to the ebu must be locked */
+DEFINE_SPINLOCK(ebu_lock);
+EXPORT_SYMBOL_GPL(ebu_lock);
+
+static struct resource ltq_ebu_resource = {
+	.name	= "ebu",
+	.start	= LTQ_EBU_BASE_ADDR,
+	.end	= LTQ_EBU_BASE_ADDR + LTQ_EBU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+/* remapped base addr of the clock unit and external bus unit */
+void __iomem *ltq_ebu_membase;
+
+static int __init lantiq_ebu_init(void)
+{
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_ebu_resource) < 0)
+		panic("Failed to insert ebu memory\n");
+
+	if (request_mem_region(ltq_ebu_resource.start,
+			resource_size(&ltq_ebu_resource), "ebu") < 0)
+		panic("Failed to request ebu memory\n");
+
+	/* remap ebu register range */
+	ltq_ebu_membase = ioremap_nocache(ltq_ebu_resource.start,
+				resource_size(&ltq_ebu_resource));
+	if (!ltq_ebu_membase)
+		panic("Failed to remap ebu memory\n");
+
+	/* make sure to unprotect the memory region where flash is located */
+	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);
+	return 0;
+}
+
+postcore_initcall(lantiq_ebu_init);

arch/mips/lantiq/xway/gpio.c

@@ -0,0 +1,195 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+
+#include <lantiq_soc.h>
+
+#define LTQ_GPIO_OUT		0x00
+#define LTQ_GPIO_IN		0x04
+#define LTQ_GPIO_DIR		0x08
+#define LTQ_GPIO_ALTSEL0	0x0C
+#define LTQ_GPIO_ALTSEL1	0x10
+#define LTQ_GPIO_OD		0x14
+
+#define PINS_PER_PORT		16
+#define MAX_PORTS		3
+
+#define ltq_gpio_getbit(m, r, p)	(!!(ltq_r32(m + r) & (1 << p)))
+#define ltq_gpio_setbit(m, r, p)	ltq_w32_mask(0, (1 << p), m + r)
+#define ltq_gpio_clearbit(m, r, p)	ltq_w32_mask((1 << p), 0, m + r)
+
+struct ltq_gpio {
+	void __iomem *membase;
+	struct gpio_chip chip;
+};
+
+static struct ltq_gpio ltq_gpio_port[MAX_PORTS];
+
+int gpio_to_irq(unsigned int gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned int gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+
+int ltq_gpio_request(unsigned int pin, unsigned int alt0,
+	unsigned int alt1, unsigned int dir, const char *name)
+{
+	int id = 0;
+
+	if (pin >= (MAX_PORTS * PINS_PER_PORT))
+		return -EINVAL;
+	if (gpio_request(pin, name)) {
+		pr_err("failed to setup lantiq gpio: %s\n", name);
+		return -EBUSY;
+	}
+	if (dir)
+		gpio_direction_output(pin, 1);
+	else
+		gpio_direction_input(pin);
+	while (pin >= PINS_PER_PORT) {
+		pin -= PINS_PER_PORT;
+		id++;
+	}
+	if (alt0)
+		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL0, pin);
+	else
+		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL0, pin);
+	if (alt1)
+		ltq_gpio_setbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL1, pin);
+	else
+		ltq_gpio_clearbit(ltq_gpio_port[id].membase,
+			LTQ_GPIO_ALTSEL1, pin);
+	return 0;
+}
+EXPORT_SYMBOL(ltq_gpio_request);
+
+static void ltq_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	if (value)
+		ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+	else
+		ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OUT, offset);
+}
+
+static int ltq_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	return ltq_gpio_getbit(ltq_gpio->membase, LTQ_GPIO_IN, offset);
+}
+
+static int ltq_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+
+	return 0;
+}
+
+static int ltq_gpio_direction_output(struct gpio_chip *chip,
+	unsigned int offset, int value)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_OD, offset);
+	ltq_gpio_setbit(ltq_gpio->membase, LTQ_GPIO_DIR, offset);
+	ltq_gpio_set(chip, offset, value);
+
+	return 0;
+}
+
+static int ltq_gpio_req(struct gpio_chip *chip, unsigned offset)
+{
+	struct ltq_gpio *ltq_gpio = container_of(chip, struct ltq_gpio, chip);
+
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL0, offset);
+	ltq_gpio_clearbit(ltq_gpio->membase, LTQ_GPIO_ALTSEL1, offset);
+	return 0;
+}
+
+static int ltq_gpio_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	if (pdev->id >= MAX_PORTS) {
+		dev_err(&pdev->dev, "invalid gpio port %d\n",
+			pdev->id);
+		return -EINVAL;
+	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get memory for gpio port %d\n",
+			pdev->id);
+		return -ENOENT;
+	}
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev,
+			"failed to request memory for gpio port %d\n",
+			pdev->id);
+		return -EBUSY;
+	}
+	ltq_gpio_port[pdev->id].membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_gpio_port[pdev->id].membase) {
+		dev_err(&pdev->dev, "failed to remap memory for gpio port %d\n",
+			pdev->id);
+		return -ENOMEM;
+	}
+	ltq_gpio_port[pdev->id].chip.label = "ltq_gpio";
+	ltq_gpio_port[pdev->id].chip.direction_input = ltq_gpio_direction_input;
+	ltq_gpio_port[pdev->id].chip.direction_output =
+		ltq_gpio_direction_output;
+	ltq_gpio_port[pdev->id].chip.get = ltq_gpio_get;
+	ltq_gpio_port[pdev->id].chip.set = ltq_gpio_set;
+	ltq_gpio_port[pdev->id].chip.request = ltq_gpio_req;
+	ltq_gpio_port[pdev->id].chip.base = PINS_PER_PORT * pdev->id;
+	ltq_gpio_port[pdev->id].chip.ngpio = PINS_PER_PORT;
+	platform_set_drvdata(pdev, &ltq_gpio_port[pdev->id]);
+	return gpiochip_add(&ltq_gpio_port[pdev->id].chip);
+}
+
+static struct platform_driver
+ltq_gpio_driver = {
+	.probe = ltq_gpio_probe,
+	.driver = {
+		.name = "ltq_gpio",
+		.owner = THIS_MODULE,
+	},
+};
+
+int __init ltq_gpio_init(void)
+{
+	int ret = platform_driver_register(&ltq_gpio_driver);
+
+	if (ret)
+		pr_info("ltq_gpio : Error registering platfom driver!");
+	return ret;
+}
+
+postcore_initcall(ltq_gpio_init);

arch/mips/lantiq/xway/pmu.c

@@ -0,0 +1,70 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/ioport.h>
+
+#include <lantiq_soc.h>
+
+/* PMU - the power management unit allows us to turn part of the core
+ * on and off
+ */
+
+/* the enable / disable registers */
+#define LTQ_PMU_PWDCR	0x1C
+#define LTQ_PMU_PWDSR	0x20
+
+#define ltq_pmu_w32(x, y)	ltq_w32((x), ltq_pmu_membase + (y))
+#define ltq_pmu_r32(x)		ltq_r32(ltq_pmu_membase + (x))
+
+static struct resource ltq_pmu_resource = {
+	.name	= "pmu",
+	.start	= LTQ_PMU_BASE_ADDR,
+	.end	= LTQ_PMU_BASE_ADDR + LTQ_PMU_SIZE - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static void __iomem *ltq_pmu_membase;
+
+void ltq_pmu_enable(unsigned int module)
+{
+	int err = 1000000;
+
+	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) & ~module, LTQ_PMU_PWDCR);
+	do {} while (--err && (ltq_pmu_r32(LTQ_PMU_PWDSR) & module));
+
+	if (!err)
+		panic("activating PMU module failed!\n");
+}
+EXPORT_SYMBOL(ltq_pmu_enable);
+
+void ltq_pmu_disable(unsigned int module)
+{
+	ltq_pmu_w32(ltq_pmu_r32(LTQ_PMU_PWDCR) | module, LTQ_PMU_PWDCR);
+}
+EXPORT_SYMBOL(ltq_pmu_disable);
+
+int __init ltq_pmu_init(void)
+{
+	if (insert_resource(&iomem_resource, &ltq_pmu_resource) < 0)
+		panic("Failed to insert pmu memory\n");
+
+	if (request_mem_region(ltq_pmu_resource.start,
+			resource_size(&ltq_pmu_resource), "pmu") < 0)
+		panic("Failed to request pmu memory\n");
+
+	ltq_pmu_membase = ioremap_nocache(ltq_pmu_resource.start,
+				resource_size(&ltq_pmu_resource));
+	if (!ltq_pmu_membase)
+		panic("Failed to remap pmu memory\n");
+	return 0;
+}
+
+core_initcall(ltq_pmu_init);

arch/mips/lantiq/xway/prom-ase.c

@@ -0,0 +1,39 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_AMAZON_SE	"Amazon_SE"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	switch (i->partnum) {
+	case SOC_ID_AMAZON_SE:
+		i->name = SOC_AMAZON_SE;
+		i->type = SOC_TYPE_AMAZON_SE;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}

arch/mips/lantiq/xway/prom-xway.c

@@ -0,0 +1,54 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <lantiq_soc.h>
+
+#include "../prom.h"
+
+#define SOC_DANUBE	"Danube"
+#define SOC_TWINPASS	"Twinpass"
+#define SOC_AR9		"AR9"
+
+#define PART_SHIFT	12
+#define PART_MASK	0x0FFFFFFF
+#define REV_SHIFT	28
+#define REV_MASK	0xF0000000
+
+void __init ltq_soc_detect(struct ltq_soc_info *i)
+{
+	i->partnum = (ltq_r32(LTQ_MPS_CHIPID) & PART_MASK) >> PART_SHIFT;
+	i->rev = (ltq_r32(LTQ_MPS_CHIPID) & REV_MASK) >> REV_SHIFT;
+	switch (i->partnum) {
+	case SOC_ID_DANUBE1:
+	case SOC_ID_DANUBE2:
+		i->name = SOC_DANUBE;
+		i->type = SOC_TYPE_DANUBE;
+		break;
+
+	case SOC_ID_TWINPASS:
+		i->name = SOC_TWINPASS;
+		i->type = SOC_TYPE_DANUBE;
+		break;
+
+	case SOC_ID_ARX188:
+	case SOC_ID_ARX168:
+	case SOC_ID_ARX182:
+		i->name = SOC_AR9;
+		i->type = SOC_TYPE_AR9;
+		break;
+
+	default:
+		unreachable();
+		break;
+	}
+}

arch/mips/lantiq/xway/reset.c

@@ -0,0 +1,91 @@
+/*
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ *  Copyright (C) 2010 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/pm.h>
+#include <linux/module.h>
+#include <asm/reboot.h>
+
+#include <lantiq_soc.h>
+
+#define ltq_rcu_w32(x, y)	ltq_w32((x), ltq_rcu_membase + (y))
+#define ltq_rcu_r32(x)		ltq_r32(ltq_rcu_membase + (x))
+
+/* register definitions */
+#define LTQ_RCU_RST		0x0010
+#define LTQ_RCU_RST_ALL		0x40000000
+
+#define LTQ_RCU_RST_STAT	0x0014
+#define LTQ_RCU_STAT_SHIFT	26
+
+static struct resource ltq_rcu_resource = {
+	.name   = "rcu",
+	.start  = LTQ_RCU_BASE_ADDR,
+	.end    = LTQ_RCU_BASE_ADDR + LTQ_RCU_SIZE - 1,
+	.flags  = IORESOURCE_MEM,
+};
+
+/* remapped base addr of the reset control unit */
+static void __iomem *ltq_rcu_membase;
+
+/* This function is used by the watchdog driver */
+int ltq_reset_cause(void)
+{
+	u32 val = ltq_rcu_r32(LTQ_RCU_RST_STAT);
+	return val >> LTQ_RCU_STAT_SHIFT;
+}
+EXPORT_SYMBOL_GPL(ltq_reset_cause);
+
+static void ltq_machine_restart(char *command)
+{
+	pr_notice("System restart\n");
+	local_irq_disable();
+	ltq_rcu_w32(ltq_rcu_r32(LTQ_RCU_RST) | LTQ_RCU_RST_ALL, LTQ_RCU_RST);
+	unreachable();
+}
+
+static void ltq_machine_halt(void)
+{
+	pr_notice("System halted.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static void ltq_machine_power_off(void)
+{
+	pr_notice("Please turn off the power now.\n");
+	local_irq_disable();
+	unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	/* insert and request the memory region */
+	if (insert_resource(&iomem_resource, &ltq_rcu_resource) < 0)
+		panic("Failed to insert rcu memory\n");
+
+	if (request_mem_region(ltq_rcu_resource.start,
+			resource_size(&ltq_rcu_resource), "rcu") < 0)
+		panic("Failed to request rcu memory\n");
+
+	/* remap rcu register range */
+	ltq_rcu_membase = ioremap_nocache(ltq_rcu_resource.start,
+				resource_size(&ltq_rcu_resource));
+	if (!ltq_rcu_membase)
+		panic("Failed to remap rcu memory\n");
+
+	_machine_restart = ltq_machine_restart;
+	_machine_halt = ltq_machine_halt;
+	pm_power_off = ltq_machine_power_off;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);