|
@@ -34,9 +34,9 @@
|
|
|
IPG_AC_DMA | IPG_AC_FIFO | IPG_AC_NETWORK | IPG_AC_HOST | \
|
|
|
IPG_AC_AUTO_INIT)
|
|
|
|
|
|
-#define ipg_w32(val32,reg) iowrite32((val32), ioaddr + (reg))
|
|
|
-#define ipg_w16(val16,reg) iowrite16((val16), ioaddr + (reg))
|
|
|
-#define ipg_w8(val8,reg) iowrite8((val8), ioaddr + (reg))
|
|
|
+#define ipg_w32(val32, reg) iowrite32((val32), ioaddr + (reg))
|
|
|
+#define ipg_w16(val16, reg) iowrite16((val16), ioaddr + (reg))
|
|
|
+#define ipg_w8(val8, reg) iowrite8((val8), ioaddr + (reg))
|
|
|
|
|
|
#define ipg_r32(reg) ioread32(ioaddr + (reg))
|
|
|
#define ipg_r16(reg) ioread16(ioaddr + (reg))
|
|
@@ -54,20 +54,22 @@ MODULE_AUTHOR("IC Plus Corp. 2003");
|
|
|
MODULE_DESCRIPTION("IC Plus IP1000 Gigabit Ethernet Adapter Linux Driver");
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
-//variable record -- index by leading revision/length
|
|
|
-//Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
|
|
|
+/*
|
|
|
+ * Variable record -- index by leading revision/length
|
|
|
+ * Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
|
|
|
+ */
|
|
|
static unsigned short DefaultPhyParam[] = {
|
|
|
- // 11/12/03 IP1000A v1-3 rev=0x40
|
|
|
+ /* 11/12/03 IP1000A v1-3 rev=0x40 */
|
|
|
/*--------------------------------------------------------------------------
|
|
|
(0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
|
|
|
27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6,
|
|
|
31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700,
|
|
|
--------------------------------------------------------------------------*/
|
|
|
- // 12/17/03 IP1000A v1-4 rev=0x40
|
|
|
+ /* 12/17/03 IP1000A v1-4 rev=0x40 */
|
|
|
(0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
|
|
|
0x0000,
|
|
|
30, 0x005e, 9, 0x0700,
|
|
|
- // 01/09/04 IP1000A v1-5 rev=0x41
|
|
|
+ /* 01/09/04 IP1000A v1-5 rev=0x41 */
|
|
|
(0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
|
|
|
0x0000,
|
|
|
30, 0x005e, 9, 0x0700,
|
|
@@ -187,7 +189,7 @@ static void send_end(void __iomem *ioaddr, u8 phyctrlpolarity)
|
|
|
phyctrlpolarity) & IPG_PC_RSVD_MASK, PHY_CTRL);
|
|
|
}
|
|
|
|
|
|
-static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity)
|
|
|
+static u16 read_phy_bit(void __iomem *ioaddr, u8 phyctrlpolarity)
|
|
|
{
|
|
|
u16 bit_data;
|
|
|
|
|
@@ -204,7 +206,7 @@ static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity)
|
|
|
* Read a register from the Physical Layer device located
|
|
|
* on the IPG NIC, using the IPG PHYCTRL register.
|
|
|
*/
|
|
|
-static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
|
|
|
+static int mdio_read(struct net_device *dev, int phy_id, int phy_reg)
|
|
|
{
|
|
|
void __iomem *ioaddr = ipg_ioaddr(dev);
|
|
|
/*
|
|
@@ -548,7 +550,7 @@ static int ipg_config_autoneg(struct net_device *dev)
|
|
|
printk("\n");
|
|
|
} else {
|
|
|
/* Configure IPG for half duplex operation. */
|
|
|
- printk(KERN_INFO "%s: setting half duplex, "
|
|
|
+ printk(KERN_INFO "%s: setting half duplex, "
|
|
|
"no TX flow control, no RX flow control.\n", dev->name);
|
|
|
|
|
|
mac_ctrl_val &= ~IPG_MC_DUPLEX_SELECT_FD &
|
|
@@ -1080,12 +1082,12 @@ static int ipg_nic_rxrestore(struct net_device *dev)
|
|
|
#ifdef JUMBO_FRAME
|
|
|
|
|
|
/* use jumboindex and jumbosize to control jumbo frame status
|
|
|
- initial status is jumboindex=-1 and jumbosize=0
|
|
|
- 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
|
|
|
- 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
|
|
|
- 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
|
|
|
- previous receiving and need to continue dumping the current one
|
|
|
-*/
|
|
|
+ * initial status is jumboindex=-1 and jumbosize=0
|
|
|
+ * 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
|
|
|
+ * 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
|
|
|
+ * 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
|
|
|
+ * previous receiving and need to continue dumping the current one
|
|
|
+ */
|
|
|
enum {
|
|
|
NORMAL_PACKET,
|
|
|
ERROR_PACKET
|
|
@@ -1200,7 +1202,7 @@ static void ipg_nic_rx_with_start_and_end(struct net_device *dev,
|
|
|
jumbo->skb = NULL;
|
|
|
}
|
|
|
|
|
|
- // 1: found error, 0 no error
|
|
|
+ /* 1: found error, 0 no error */
|
|
|
if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
|
|
|
return;
|
|
|
|
|
@@ -1208,7 +1210,7 @@ static void ipg_nic_rx_with_start_and_end(struct net_device *dev,
|
|
|
if (!skb)
|
|
|
return;
|
|
|
|
|
|
- // accept this frame and send to upper layer
|
|
|
+ /* accept this frame and send to upper layer */
|
|
|
framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
|
|
|
if (framelen > IPG_RXFRAG_SIZE)
|
|
|
framelen = IPG_RXFRAG_SIZE;
|
|
@@ -1229,11 +1231,11 @@ static void ipg_nic_rx_with_start(struct net_device *dev,
|
|
|
struct pci_dev *pdev = sp->pdev;
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
- // 1: found error, 0 no error
|
|
|
+ /* 1: found error, 0 no error */
|
|
|
if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
|
|
|
return;
|
|
|
|
|
|
- // accept this frame and send to upper layer
|
|
|
+ /* accept this frame and send to upper layer */
|
|
|
skb = sp->rx_buff[entry];
|
|
|
if (!skb)
|
|
|
return;
|
|
@@ -1260,7 +1262,7 @@ static void ipg_nic_rx_with_end(struct net_device *dev,
|
|
|
{
|
|
|
struct ipg_jumbo *jumbo = &sp->jumbo;
|
|
|
|
|
|
- //1: found error, 0 no error
|
|
|
+ /* 1: found error, 0 no error */
|
|
|
if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
|
|
|
struct sk_buff *skb = sp->rx_buff[entry];
|
|
|
|
|
@@ -1311,7 +1313,7 @@ static void ipg_nic_rx_no_start_no_end(struct net_device *dev,
|
|
|
{
|
|
|
struct ipg_jumbo *jumbo = &sp->jumbo;
|
|
|
|
|
|
- //1: found error, 0 no error
|
|
|
+ /* 1: found error, 0 no error */
|
|
|
if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
|
|
|
struct sk_buff *skb = sp->rx_buff[entry];
|
|
|
|