[PATCH] lindent rio drivers

Run all rio files through indent -kr -i8 -bri0 -l255, as requested by Alan.

rioboot.c and rioinit.c were skipped due to worrisome lindent warnings.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/char/rio/board.h

@@ -52,63 +52,57 @@ static char *_board_h_sccs_ = "@(#)board.h	1.2";
 /*
 **	The shape of the Host Control area, at offset 0x7C00, Write Only
 */
-struct s_Ctrl
-{
-	BYTE	DpCtl;				/* 7C00 */
-	BYTE	Dp_Unused2_[127];
-	BYTE	DpIntSet;			/* 7C80 */
-	BYTE	Dp_Unused3_[127];
-	BYTE	DpTpuReset;			/* 7D00 */
-	BYTE	Dp_Unused4_[127];
-	BYTE	DpIntReset;			/* 7D80 */
-	BYTE	Dp_Unused5_[127];
+struct s_Ctrl {
+	BYTE DpCtl;		/* 7C00 */
+	BYTE Dp_Unused2_[127];
+	BYTE DpIntSet;		/* 7C80 */
+	BYTE Dp_Unused3_[127];
+	BYTE DpTpuReset;	/* 7D00 */
+	BYTE Dp_Unused4_[127];
+	BYTE DpIntReset;	/* 7D80 */
+	BYTE Dp_Unused5_[127];
 };
 
 /*
 ** The PROM data area on the host (0x7C00), Read Only
 */
-struct s_Prom
-{
-	WORD	DpSlxCode[2];
-	WORD	DpRev;
-	WORD	Dp_Unused6_;
-	WORD	DpUniq[4];
-	WORD	DpJahre;
-	WORD	DpWoche;
-	WORD	DpHwFeature[5];
-	WORD	DpOemId;
-	WORD	DpSiggy[16];
+struct s_Prom {
+	WORD DpSlxCode[2];
+	WORD DpRev;
+	WORD Dp_Unused6_;
+	WORD DpUniq[4];
+	WORD DpJahre;
+	WORD DpWoche;
+	WORD DpHwFeature[5];
+	WORD DpOemId;
+	WORD DpSiggy[16];
 };
 
 /*
 ** Union of the Ctrl and Prom areas
 */
-union u_CtrlProm	/* This is the control/PROM area (0x7C00) */
-{
-	struct s_Ctrl	DpCtrl;
-	struct s_Prom	DpProm;
+union u_CtrlProm {		/* This is the control/PROM area (0x7C00) */
+	struct s_Ctrl DpCtrl;
+	struct s_Prom DpProm;
 };
 
 /*
 ** The top end of memory!
 */
-struct s_ParmMapS		/* Area containing Parm Map Pointer */
-{
-	BYTE	Dp_Unused8_[DP_PARMMAP_ADDR];
-	WORD	DpParmMapAd;
+struct s_ParmMapS {		/* Area containing Parm Map Pointer */
+	BYTE Dp_Unused8_[DP_PARMMAP_ADDR];
+	WORD DpParmMapAd;
 };
 
-struct s_StartUpS
-{
-	BYTE    Dp_Unused9_[DP_STARTUP_ADDR];
-	BYTE	Dp_LongJump[0x4];
-	BYTE	Dp_Unused10_[2];
-	BYTE	Dp_ShortJump[0x2];
+struct s_StartUpS {
+	BYTE Dp_Unused9_[DP_STARTUP_ADDR];
+	BYTE Dp_LongJump[0x4];
+	BYTE Dp_Unused10_[2];
+	BYTE Dp_ShortJump[0x2];
 };
 
-union u_Sram2ParmMap	/* This is the top of memory (0x7E00-0x7FFF) */
-{
-	BYTE	DpSramMem[DP_SRAM2_SIZE];
+union u_Sram2ParmMap {		/* This is the top of memory (0x7E00-0x7FFF) */
+	BYTE DpSramMem[DP_SRAM2_SIZE];
 	struct s_ParmMapS DpParmMapS;
 	struct s_StartUpS DpStartUpS;
 };
@@ -116,13 +110,12 @@ union u_Sram2ParmMap	/* This is the top of memory (0x7E00-0x7FFF) */
 /*
 **	This is the DP RAM overlay.
 */
-struct DpRam
-{
-    BYTE 		 DpSram1[DP_SRAM1_SIZE];     /* 0000 - 7BFF */
-    union u_CtrlProm     DpCtrlProm;                 /* 7C00 - 7DFF */
-    union u_Sram2ParmMap DpSram2ParmMap;             /* 7E00 - 7FFF */
-    BYTE		 DpScratch[DP_SCRATCH_SIZE]; /* 8000 - 8FFF */
-    BYTE		 DpSram3[DP_SRAM3_SIZE];     /* 9000 - FFFF */
+struct DpRam {
+	BYTE DpSram1[DP_SRAM1_SIZE];	/* 0000 - 7BFF */
+	union u_CtrlProm DpCtrlProm;	/* 7C00 - 7DFF */
+	union u_Sram2ParmMap DpSram2ParmMap;	/* 7E00 - 7FFF */
+	BYTE DpScratch[DP_SCRATCH_SIZE];	/* 8000 - 8FFF */
+	BYTE DpSram3[DP_SRAM3_SIZE];	/* 9000 - FFFF */
 };
 
 #define	DpControl	DpCtrlProm.DpCtrl.DpCtl

drivers/char/rio/bootpkt.h

@@ -41,7 +41,7 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_bootpkt_h_sccs = "@(#)bootpkt.h	1.1" ;
+static char *_rio_bootpkt_h_sccs = "@(#)bootpkt.h	1.1";
 #endif
 #endif
 
@@ -49,14 +49,13 @@ static char *_rio_bootpkt_h_sccs = "@(#)bootpkt.h	1.1" ;
      * Overlayed onto the Data fields of a regular
      * Packet
      ************************************************/
-typedef struct BOOT_PKT BOOT_PKT ;
+typedef struct BOOT_PKT BOOT_PKT;
 struct BOOT_PKT {
-                    short     seq_num ;
-                    char      data[10] ;
-                } ;
+	short seq_num;
+	char data[10];
+};
 
 
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/brates.h

@@ -97,11 +97,10 @@
 
 #define MAX_RATE B2000
 
-struct    baud_rate            /* Tag for baud rates */
-{
-     /* short    host_rate,*/        /* As passed by the driver */
-     short    divisor,          /* The divisor */
-              prescaler;        /* The pre-scaler */
+struct baud_rate {		/* Tag for baud rates */
+	/* short    host_rate, *//* As passed by the driver */
+	short divisor,		/* The divisor */
+	 prescaler;		/* The pre-scaler */
 };
 
 #endif

drivers/char/rio/chan.h

@@ -21,7 +21,7 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_chan_h_sccs = "@(#)chan.h	1.1" ;
+static char *_rio_chan_h_sccs = "@(#)chan.h	1.1";
 #endif
 #endif
 

drivers/char/rio/cirrus.h

@@ -73,20 +73,20 @@
 #define	TIMER_TICK	0x82
 #define STOP_BREAK	0x83
 #define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
-#define txack1	((short *)0x7104) 
-#define rxack1	((short *)0x7102) 
+#define txack1	((short *)0x7104)
+#define rxack1	((short *)0x7102)
 #define mdack1  ((short *)0x7106)
-#define txack2  ((short *)0x7006) 
-#define rxack2	((short *)0x7004) 
-#define mdack2  ((short *)0x7100) 
+#define txack2  ((short *)0x7006)
+#define rxack2	((short *)0x7004)
+#define mdack2  ((short *)0x7100)
 #define int_latch       ((short *) 0x7800)
-#define int_status      ((short *) 0x7c00) 
-#define tx1_pending     0x20 
-#define rx1_pending     0x10 
-#define md1_pending     0x40 
-#define tx2_pending     0x02 
-#define rx2_pending     0x01 
-#define md2_pending     0x40 
+#define int_status      ((short *) 0x7c00)
+#define tx1_pending     0x20
+#define rx1_pending     0x10
+#define md1_pending     0x40
+#define tx2_pending     0x02
+#define rx2_pending     0x01
+#define md2_pending     0x40
 #define module1_bits	0x07
 #define module1_modern	0x08
 #define module2_bits	0x70
@@ -113,65 +113,65 @@
    NB. These registers are relative values on 8 bit boundaries whereas
    on the RTA's the CIRRUS registers are on word boundaries. Use pointer
    arithmetic (short *) to obtain the real addresses required */
-#define ccr	0x05	/* Channel Command Register     */
-#define ier	0x06	/* Interrupt Enable Register    */
-#define cor1	0x08	/* Channel Option Register 1    */
-#define cor2	0x09	/* Channel Option Register 2    */
-#define cor3	0x0a	/* Channel Option Register 3    */
-#define cor4	0x1e	/* Channel Option Register 4    */
-#define	cor5	0x1f	/* Channel Option Register 5	*/
-
-#define ccsr	0x0b	/* Channel Control Status Register */
-#define rdcr	0x0e	/* Receive Data Count Register  */
-#define tdcr	0x12	/* Transmit Data Count Register */
-#define mcor1	0x15	/* Modem Change Option Register 1 */
-#define mcor2	0x16	/* Modem Change Option Regsiter 2 */
-
-#define livr	0x18	/* Local Interrupt Vector Register */
-#define schr1	0x1a	/* Special Character Register 1 */
-#define schr2	0x1b	/* Special Character Register 2 */
-#define schr3	0x1c	/* Special Character Register 3 */
-#define schr4	0x1d	/* Special Character Register 4 */
-
-#define rtr	0x20    /* Receive Timer Register */
-#define rtpr	0x21	/* Receive Timeout Period Register */
-#define lnc	0x24	/* Lnext character */
-
-#define rivr	0x43	/* Receive Interrupt Vector Register    */
-#define tivr	0x42	/* Transmit Interrupt Vector Register   */
-#define mivr	0x41	/* Modem Interrupt Vector Register      */
-#define gfrcr	0x40	/* Global Firmware Revision code Reg    */
-#define ricr	0x44	/* Receive Interrupting Channel Reg     */
-#define ticr	0x45	/* Transmit Interrupting Channel Reg    */
-#define micr	0x46	/* Modem Interrupting Channel Register  */
-
-#define gcr	0x4b	/* Global configuration register*/
-#define misr    0x4c    /* Modem interrupt status register */
+#define ccr	0x05		/* Channel Command Register     */
+#define ier	0x06		/* Interrupt Enable Register    */
+#define cor1	0x08		/* Channel Option Register 1    */
+#define cor2	0x09		/* Channel Option Register 2    */
+#define cor3	0x0a		/* Channel Option Register 3    */
+#define cor4	0x1e		/* Channel Option Register 4    */
+#define	cor5	0x1f		/* Channel Option Register 5    */
+
+#define ccsr	0x0b		/* Channel Control Status Register */
+#define rdcr	0x0e		/* Receive Data Count Register  */
+#define tdcr	0x12		/* Transmit Data Count Register */
+#define mcor1	0x15		/* Modem Change Option Register 1 */
+#define mcor2	0x16		/* Modem Change Option Regsiter 2 */
+
+#define livr	0x18		/* Local Interrupt Vector Register */
+#define schr1	0x1a		/* Special Character Register 1 */
+#define schr2	0x1b		/* Special Character Register 2 */
+#define schr3	0x1c		/* Special Character Register 3 */
+#define schr4	0x1d		/* Special Character Register 4 */
+
+#define rtr	0x20		/* Receive Timer Register */
+#define rtpr	0x21		/* Receive Timeout Period Register */
+#define lnc	0x24		/* Lnext character */
+
+#define rivr	0x43		/* Receive Interrupt Vector Register    */
+#define tivr	0x42		/* Transmit Interrupt Vector Register   */
+#define mivr	0x41		/* Modem Interrupt Vector Register      */
+#define gfrcr	0x40		/* Global Firmware Revision code Reg    */
+#define ricr	0x44		/* Receive Interrupting Channel Reg     */
+#define ticr	0x45		/* Transmit Interrupting Channel Reg    */
+#define micr	0x46		/* Modem Interrupting Channel Register  */
+
+#define gcr	0x4b		/* Global configuration register */
+#define misr    0x4c		/* Modem interrupt status register */
 
 #define rbusr	0x59
 #define tbusr	0x5a
 #define mbusr	0x5b
 
-#define eoir	0x60	/* End Of Interrupt Register */
-#define rdsr	0x62	/* Receive Data / Status Register */
-#define tdr	0x63	/* Transmit Data Register */
-#define svrr	0x67	/* Service Request Register */
+#define eoir	0x60		/* End Of Interrupt Register */
+#define rdsr	0x62		/* Receive Data / Status Register */
+#define tdr	0x63		/* Transmit Data Register */
+#define svrr	0x67		/* Service Request Register */
 
-#define car	0x68	/* Channel Access Register */
-#define mir	0x69	/* Modem Interrupt Register */
-#define tir	0x6a	/* Transmit Interrupt Register */
-#define rir	0x6b	/* Receive Interrupt Register */
-#define msvr1	0x6c	/* Modem Signal Value Register 1 */
-#define msvr2	0x6d	/* Modem Signal Value Register 2*/
-#define psvr	0x6f	/* Printer Signal Value Register*/
+#define car	0x68		/* Channel Access Register */
+#define mir	0x69		/* Modem Interrupt Register */
+#define tir	0x6a		/* Transmit Interrupt Register */
+#define rir	0x6b		/* Receive Interrupt Register */
+#define msvr1	0x6c		/* Modem Signal Value Register 1 */
+#define msvr2	0x6d		/* Modem Signal Value Register 2 */
+#define psvr	0x6f		/* Printer Signal Value Register */
 
-#define tbpr	0x72	/* Transmit Baud Rate Period Register */
-#define tcor	0x76	/* Transmit Clock Option Register */
+#define tbpr	0x72		/* Transmit Baud Rate Period Register */
+#define tcor	0x76		/* Transmit Clock Option Register */
 
-#define rbpr	0x78	/* Receive Baud Rate Period Register */
-#define rber	0x7a	/* Receive Baud Rate Extension Register */
-#define rcor	0x7c	/* Receive Clock Option Register*/
-#define ppr	0x7e	/* Prescalar Period Register    */
+#define rbpr	0x78		/* Receive Baud Rate Period Register */
+#define rber	0x7a		/* Receive Baud Rate Extension Register */
+#define rcor	0x7c		/* Receive Clock Option Register */
+#define ppr	0x7e		/* Prescalar Period Register    */
 
 /* Misc registers used for forcing the 1400 out of its reset woes */
 #define airl	0x6d
@@ -192,10 +192,10 @@
 
 /* RDSR - when status read from FIFO */
 #define	RDSR_BREAK		0x08	/* Break received */
-#define RDSR_TIMEOUT    	0x80    /* No new data timeout */
-#define RDSR_SC1  	  	0x10    /* Special char 1 (tx XON) matched */
-#define RDSR_SC2  	  	0x20    /* Special char 2 (tx XOFF) matched */
-#define RDSR_SC12_MASK	  	0x30    /* Mask for special chars 1 and 2 */
+#define RDSR_TIMEOUT    	0x80	/* No new data timeout */
+#define RDSR_SC1  	  	0x10	/* Special char 1 (tx XON) matched */
+#define RDSR_SC2  	  	0x20	/* Special char 2 (tx XOFF) matched */
+#define RDSR_SC12_MASK	  	0x30	/* Mask for special chars 1 and 2 */
 
 /* PPR */
 #define PPR_DEFAULT	0x31	/* Default value - for a 25Mhz clock gives
@@ -244,7 +244,7 @@
 #define IER_TIMEOUT	0x01	/* Timeout on no data */
 
 #define	IER_DEFAULT	0x94	/* Default values */
-#define IER_PARALLEL    0x84    /* Default for Parallel */
+#define IER_PARALLEL    0x84	/* Default for Parallel */
 #define	IER_EMPTY	0x92	/* Transmitter empty rather than ready */
 
 /* COR1 - Driver only */
@@ -264,11 +264,11 @@
 #define	COR1_7BITS	0x02	/* 7 data bits */
 #define	COR1_8BITS	0x03	/* 8 data bits */
 
-#define COR1_HOST       0xef    /* Safe host bits */
+#define COR1_HOST       0xef	/* Safe host bits */
 
 /* RTA only */
-#define COR1_CINPCK     0x00    /* Check parity of received characters */
-#define COR1_CNINPCK    0x10    /* Don't check parity */
+#define COR1_CINPCK     0x00	/* Check parity of received characters */
+#define COR1_CNINPCK    0x10	/* Don't check parity */
 
 /* COR2 bits for both RTA and driver use */
 #define	COR2_IXANY	0x80	/* IXANY - any character is XON */
@@ -293,9 +293,9 @@
 #define	COR3_FCT	0x20	/* Flow control transparency */
 #define	COR3_SCD12	0x10	/* Special character detect for SCHR's 1 + 2 */
 #define	COR3_FIFO12	0x0c	/* 12 chars for receive FIFO threshold */
-#define COR3_FIFO10     0x0a    /* 10 chars for receive FIFO threshold */
-#define COR3_FIFO8      0x08    /* 8 chars for receive FIFO threshold */
-#define COR3_FIFO6      0x06    /* 6 chars for receive FIFO threshold */
+#define COR3_FIFO10     0x0a	/* 10 chars for receive FIFO threshold */
+#define COR3_FIFO8      0x08	/* 8 chars for receive FIFO threshold */
+#define COR3_FIFO6      0x06	/* 6 chars for receive FIFO threshold */
 
 #define COR3_THRESHOLD  COR3_FIFO8	/* MUST BE LESS THAN MCOR_THRESHOLD */
 
@@ -386,7 +386,7 @@
 
 #define	MCOR_THRESHBITS 0x0F	/* mask for ANDing out the above */
 
-#define	MCOR_THRESHOLD	MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */
+#define	MCOR_THRESHOLD	MCOR_THRESH9	/* MUST BE GREATER THAN COR3_THRESHOLD */
 
 
 /* RTPR */
@@ -429,25 +429,25 @@
 #define CONFIG		0x01	/* Configure a port */
 #define	MOPEN		0x02	/* Modem open (block for DCD) */
 #define	CLOSE		0x03	/* Close a port */
-#define	WFLUSH		(0x04 | PRE_EMPTIVE) /* Write flush */
-#define	RFLUSH		(0x05 | PRE_EMPTIVE) /* Read flush */
-#define	RESUME		(0x06 | PRE_EMPTIVE) /* Resume if xoffed */
-#define	SBREAK		0x07 	/* Start break */
+#define	WFLUSH		(0x04 | PRE_EMPTIVE)	/* Write flush */
+#define	RFLUSH		(0x05 | PRE_EMPTIVE)	/* Read flush */
+#define	RESUME		(0x06 | PRE_EMPTIVE)	/* Resume if xoffed */
+#define	SBREAK		0x07	/* Start break */
 #define	EBREAK		0x08	/* End break */
-#define	SUSPEND		(0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
-#define FCLOSE          (0x0a | PRE_EMPTIVE) /* Force close */
-#define XPRINT          0x0b    /* Xprint packet */
-#define MBIS		(0x0c | PRE_EMPTIVE) /* Set modem lines */
-#define MBIC		(0x0d | PRE_EMPTIVE) /* Clear modem lines */
-#define MSET		(0x0e | PRE_EMPTIVE) /* Set modem lines */
+#define	SUSPEND		(0x09 | PRE_EMPTIVE)	/* Susp op (behave as tho xoffed) */
+#define FCLOSE          (0x0a | PRE_EMPTIVE)	/* Force close */
+#define XPRINT          0x0b	/* Xprint packet */
+#define MBIS		(0x0c | PRE_EMPTIVE)	/* Set modem lines */
+#define MBIC		(0x0d | PRE_EMPTIVE)	/* Clear modem lines */
+#define MSET		(0x0e | PRE_EMPTIVE)	/* Set modem lines */
 #define PCLOSE		0x0f	/* Pseudo close - Leaves rx/tx enabled */
-#define MGET		(0x10 | PRE_EMPTIVE) /* Force update of modem status */
-#define MEMDUMP		(0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
-#define	READ_REGISTER	(0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */
+#define MGET		(0x10 | PRE_EMPTIVE)	/* Force update of modem status */
+#define MEMDUMP		(0x11 | PRE_EMPTIVE)	/* Send back mem from addr supplied */
+#define	READ_REGISTER	(0x12 | PRE_EMPTIVE)	/* Read CD1400 register (debug) */
 
 /* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
    use data[4] / data[3] to indicate current state and modem status respectively
-*/ 
+*/
 
 #define	COMPLETE	(0x20 | PRE_EMPTIVE)
 				/* Command complete */

drivers/char/rio/cmd.h

@@ -42,7 +42,7 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_cmd_h_sccs = "@(#)cmd.h	1.1" ;
+static char *_rio_cmd_h_sccs = "@(#)cmd.h	1.1";
 #endif
 #endif
 
@@ -52,7 +52,7 @@ static char *_rio_cmd_h_sccs = "@(#)cmd.h	1.1" ;
 
 #define CMD_IGNORE_PKT          ( (ushort) 0)
 #define CMD_STATUS_REQ          ( (ushort) 1)
-#define CMD_UNIT_STATUS_REQ     ( (ushort) 2)     /* Is this needed ??? */
+#define CMD_UNIT_STATUS_REQ     ( (ushort) 2)	/* Is this needed ??? */
 #define CMD_CONF_PORT           ( (ushort) 3)
 #define CMD_CONF_UNIT           ( (ushort) 4)
 #define CMD_ROUTE_MAP_REQ       ( (ushort) 5)
@@ -81,4 +81,3 @@ static char *_rio_cmd_h_sccs = "@(#)cmd.h	1.1" ;
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/cmdblk.h

@@ -44,16 +44,15 @@ static char *_cmdblk_h_sccs_ = "@(#)cmdblk.h	1.2";
 ** a rup.
 */
 
-struct CmdBlk
-{
- struct CmdBlk *NextP;          /* Pointer to next command block */
- struct	PKT     Packet;         /* A packet, to copy to the rup */
-    	                        /* The func to call to check if OK */
-    	int     (*PreFuncP)(int, struct CmdBlk *);
-    	int     PreArg;         /* The arg for the func */
-    	                        /* The func to call when completed */
-    	int     (*PostFuncP)(int, struct CmdBlk *);
-    	int     PostArg;        /* The arg for the func */
+struct CmdBlk {
+	struct CmdBlk *NextP;	/* Pointer to next command block */
+	struct PKT Packet;	/* A packet, to copy to the rup */
+	/* The func to call to check if OK */
+	int (*PreFuncP) (int, struct CmdBlk *);
+	int PreArg;		/* The arg for the func */
+	/* The func to call when completed */
+	int (*PostFuncP) (int, struct CmdBlk *);
+	int PostArg;		/* The arg for the func */
 };
 
 #define NUM_RIO_CMD_BLKS (3 * (MAX_RUP * 4 + LINKS_PER_UNIT * 4))

drivers/char/rio/cmdpkt.h

@@ -54,135 +54,112 @@ static char *_cmdpkt_h_sccs_ = "@(#)cmdpkt.h	1.2";
 ** This structure overlays a PktCmd->CmdData structure, and so starts
 ** at Data[2] in the actual pkt!
 */
-struct BootSequence
-{
-    WORD	NumPackets;
-    WORD	LoadBase;
-    WORD	CodeSize;
+struct BootSequence {
+	WORD NumPackets;
+	WORD LoadBase;
+	WORD CodeSize;
 };
 
 #define	BOOT_SEQUENCE_LEN	8
 
-struct SamTop
-{
-    BYTE Unit;
-    BYTE Link;
+struct SamTop {
+	BYTE Unit;
+	BYTE Link;
 };
 
-struct CmdHdr
-{
-    BYTE PcCommand;
-    union
-    {
-    BYTE PcPhbNum;
-    BYTE PcLinkNum;
-    BYTE PcIDNum;
-    } U0;
+struct CmdHdr {
+	BYTE PcCommand;
+	union {
+		BYTE PcPhbNum;
+		BYTE PcLinkNum;
+		BYTE PcIDNum;
+	} U0;
 };
 
 
-struct PktCmd
-{
-    union
-    {
-	struct 
-	{
-	    struct CmdHdr CmdHdr;
-	    struct BootSequence PcBootSequence;
-	} S1;
-	struct
-	{
-	    WORD PcSequence;
-	    BYTE PcBootData[RTA_BOOT_DATA_SIZE];
-	} S2;
-	struct
-	{
-	    WORD  __crud__;
-	    BYTE  PcUniqNum[4];	        /* this is really a uint. */
-	    BYTE  PcModuleTypes;  	/* what modules are fitted */
-	} S3;
-	struct
-	{
-	    struct CmdHdr CmdHdr;
-	    BYTE   __undefined__;
-	    BYTE   PcModemStatus;
-	    BYTE   PcPortStatus;
-	    BYTE   PcSubCommand;	/* commands like mem or register dump */
-	    WORD   PcSubAddr;		/* Address for command */
-	    BYTE   PcSubData[64];	/* Date area for command */
-	} S4;
-	struct
-	{
-	    struct CmdHdr CmdHdr;
-	    BYTE   PcCommandText[1];
-	    BYTE   __crud__[20];
-	    BYTE   PcIDNum2;		/* It had to go somewhere! */
-	} S5;
-	struct
-	{
-	    struct CmdHdr CmdHdr;
-	    struct SamTop    Topology[LINKS_PER_UNIT];
-	} S6;
-    } U1;
+struct PktCmd {
+	union {
+		struct {
+			struct CmdHdr CmdHdr;
+			struct BootSequence PcBootSequence;
+		} S1;
+		struct {
+			WORD PcSequence;
+			BYTE PcBootData[RTA_BOOT_DATA_SIZE];
+		} S2;
+		struct {
+			WORD __crud__;
+			BYTE PcUniqNum[4];	/* this is really a uint. */
+			BYTE PcModuleTypes;	/* what modules are fitted */
+		} S3;
+		struct {
+			struct CmdHdr CmdHdr;
+			BYTE __undefined__;
+			BYTE PcModemStatus;
+			BYTE PcPortStatus;
+			BYTE PcSubCommand;	/* commands like mem or register dump */
+			WORD PcSubAddr;	/* Address for command */
+			BYTE PcSubData[64];	/* Date area for command */
+		} S4;
+		struct {
+			struct CmdHdr CmdHdr;
+			BYTE PcCommandText[1];
+			BYTE __crud__[20];
+			BYTE PcIDNum2;	/* It had to go somewhere! */
+		} S5;
+		struct {
+			struct CmdHdr CmdHdr;
+			struct SamTop Topology[LINKS_PER_UNIT];
+		} S6;
+	} U1;
 };
 
-struct PktCmd_M
-{
-    union
-    {
-	struct 
-	{
-	    struct
-	    {
-    		uchar PcCommand;
-    		union
-    		{
-    		    uchar PcPhbNum;
-    		    uchar PcLinkNum;
-    		    uchar PcIDNum;
-    		} U0;
-	    } CmdHdr;
-	    struct
-	    {
-                ushort	NumPackets;
-                ushort	LoadBase;
-                ushort	CodeSize;
-            } PcBootSequence;
-	} S1;
-	struct
-	{
-	    ushort PcSequence;
-	    uchar PcBootData[RTA_BOOT_DATA_SIZE];
-	} S2;
-	struct
-	{
-	    ushort  __crud__;
-	    uchar  PcUniqNum[4];	        /* this is really a uint. */
-	    uchar  PcModuleTypes;  	/* what modules are fitted */
-	} S3;
-	struct
-	{
-	    ushort  __cmd_hdr__;
-	    uchar   __undefined__;
-	    uchar   PcModemStatus;
-	    uchar   PcPortStatus;
-	    uchar   PcSubCommand;
-	    ushort  PcSubAddr;
-	    uchar   PcSubData[64];
-	} S4;
-	struct
-	{
-	    ushort  __cmd_hdr__;
-	    uchar   PcCommandText[1];
-	    uchar   __crud__[20];
-	    uchar   PcIDNum2;		/* Tacked on end */
-	} S5;
-	struct
-	{
-	    ushort  __cmd_hdr__;
-	    struct Top Topology[LINKS_PER_UNIT];
-	} S6;
-    } U1;
+struct PktCmd_M {
+	union {
+		struct {
+			struct {
+				uchar PcCommand;
+				union {
+					uchar PcPhbNum;
+					uchar PcLinkNum;
+					uchar PcIDNum;
+				} U0;
+			} CmdHdr;
+			struct {
+				ushort NumPackets;
+				ushort LoadBase;
+				ushort CodeSize;
+			} PcBootSequence;
+		} S1;
+		struct {
+			ushort PcSequence;
+			uchar PcBootData[RTA_BOOT_DATA_SIZE];
+		} S2;
+		struct {
+			ushort __crud__;
+			uchar PcUniqNum[4];	/* this is really a uint. */
+			uchar PcModuleTypes;	/* what modules are fitted */
+		} S3;
+		struct {
+			ushort __cmd_hdr__;
+			uchar __undefined__;
+			uchar PcModemStatus;
+			uchar PcPortStatus;
+			uchar PcSubCommand;
+			ushort PcSubAddr;
+			uchar PcSubData[64];
+		} S4;
+		struct {
+			ushort __cmd_hdr__;
+			uchar PcCommandText[1];
+			uchar __crud__[20];
+			uchar PcIDNum2;	/* Tacked on end */
+		} S5;
+		struct {
+			ushort __cmd_hdr__;
+			struct Top Topology[LINKS_PER_UNIT];
+		} S6;
+	} U1;
 };
 
 #define Command		U1.S1.CmdHdr.PcCommand

drivers/char/rio/control.h

@@ -51,12 +51,11 @@
 #define	UFOAD		( CONTROL + 4 )
 #define IWAIT		( CONTROL + 5 )
 
-#define	IFOAD_MAGIC	0xF0AD		/* of course */
+#define	IFOAD_MAGIC	0xF0AD	/* of course */
 #define	ZOMBIE_MAGIC	(~0xDEAD)	/* not dead -> zombie */
-#define	UFOAD_MAGIC	0xD1E		/* kill-your-neighbour */
-#define	IWAIT_MAGIC	0xB1DE		/* Bide your time */
+#define	UFOAD_MAGIC	0xD1E	/* kill-your-neighbour */
+#define	IWAIT_MAGIC	0xB1DE	/* Bide your time */
 
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/daemon.h

@@ -44,18 +44,16 @@ static char *_daemon_h_sccs_ = "@(#)daemon.h	1.3";
 ** structures used on /dev/rio
 */
 
-struct Error
-{
-	uint	Error;
-	uint	Entry;
-	uint	Other;
+struct Error {
+	uint Error;
+	uint Entry;
+	uint Other;
 };
 
-struct DownLoad
-{
-	char	*DataP;
-	uint	Count;
-	uint	ProductCode;
+struct DownLoad {
+	char *DataP;
+	uint Count;
+	uint ProductCode;
 };
 
 /*
@@ -66,46 +64,41 @@ struct DownLoad
 #endif
 
 #ifndef MAX_XP_CTRL_LEN
-#define	MAX_XP_CTRL_LEN 16		/* ALSO IN PORT.H */
+#define	MAX_XP_CTRL_LEN 16	/* ALSO IN PORT.H */
 #endif
 
-struct	PortSetup
-{
-	uint	From;	/* Set/Clear XP & IXANY Control from this port.... */
-	uint	To;	/* .... to this port */
-	uint	XpCps;			/* at this speed */
-	char	XpOn[MAX_XP_CTRL_LEN];	/* this is the start string */
-	char	XpOff[MAX_XP_CTRL_LEN];	/* this is the stop string */
-	uchar	IxAny;			/* enable/disable IXANY */
-	uchar	IxOn;			/* enable/disable IXON */
-	uchar	Lock;			/* lock port params */
-	uchar	Store;			/* store params across closes */
-	uchar	Drain;			/* close only when drained */
+struct PortSetup {
+	uint From;		/* Set/Clear XP & IXANY Control from this port.... */
+	uint To;		/* .... to this port */
+	uint XpCps;		/* at this speed */
+	char XpOn[MAX_XP_CTRL_LEN];	/* this is the start string */
+	char XpOff[MAX_XP_CTRL_LEN];	/* this is the stop string */
+	uchar IxAny;		/* enable/disable IXANY */
+	uchar IxOn;		/* enable/disable IXON */
+	uchar Lock;		/* lock port params */
+	uchar Store;		/* store params across closes */
+	uchar Drain;		/* close only when drained */
 };
 
-struct	LpbReq
-{
-	uint	Host;
-	uint	Link;
-	struct  LPB     *LpbP;
+struct LpbReq {
+	uint Host;
+	uint Link;
+	struct LPB *LpbP;
 };
 
-struct	RupReq
-{
-	uint	HostNum;
-	uint	RupNum;
-	struct  RUP 	*RupP;
+struct RupReq {
+	uint HostNum;
+	uint RupNum;
+	struct RUP *RupP;
 };
 
-struct	PortReq
-{
-	uint	SysPort;
-	struct  Port 	*PortP;
+struct PortReq {
+	uint SysPort;
+	struct Port *PortP;
 };
 
-struct  StreamInfo
-{
-	uint	SysPort;
+struct StreamInfo {
+	uint SysPort;
 #if 0
 	queue_t RQueue;
 	queue_t WQueue;
@@ -115,68 +108,59 @@ struct  StreamInfo
 #endif
 };
 
-struct	HostReq
-{
-	uint	HostNum;
-	struct  Host 	*HostP;
+struct HostReq {
+	uint HostNum;
+	struct Host *HostP;
 };
 
-struct	HostDpRam
-{
-	uint	HostNum;
-	struct	DpRam	*DpRamP;
+struct HostDpRam {
+	uint HostNum;
+	struct DpRam *DpRamP;
 };
 
-struct	DebugCtrl
-{
-	uint	SysPort;
-	uint	Debug;
-	uint	Wait;
+struct DebugCtrl {
+	uint SysPort;
+	uint Debug;
+	uint Wait;
 };
 
-struct	MapInfo
-{
-	uint	FirstPort;	/* 8 ports, starting from this (tty) number */
-	uint	RtaUnique;	/* reside on this RTA (unique number) */
+struct MapInfo {
+	uint FirstPort;		/* 8 ports, starting from this (tty) number */
+	uint RtaUnique;		/* reside on this RTA (unique number) */
 };
 
-struct	MapIn
-{
-	uint	NumEntries;		/* How many port sets are we mapping? */
-	struct  MapInfo	*MapInfoP;	/* Pointer to (user space) info */
+struct MapIn {
+	uint NumEntries;	/* How many port sets are we mapping? */
+	struct MapInfo *MapInfoP;	/* Pointer to (user space) info */
 };
 
-struct  SendPack
-{
-        unsigned int	PortNum;
-	unsigned char	Len;
-	unsigned char	Data[PKT_MAX_DATA_LEN];
+struct SendPack {
+	unsigned int PortNum;
+	unsigned char Len;
+	unsigned char Data[PKT_MAX_DATA_LEN];
 };
 
-struct SpecialRupCmd
-{
-	struct	PKT		Packet;
-	unsigned short	Host;
-	unsigned short	RupNum;
+struct SpecialRupCmd {
+	struct PKT Packet;
+	unsigned short Host;
+	unsigned short RupNum;
 };
 
-struct	IdentifyRta
-{
-	ulong	RtaUnique;
-	uchar	ID;
+struct IdentifyRta {
+	ulong RtaUnique;
+	uchar ID;
 };
 
-struct	KillNeighbour
-{
-	ulong	UniqueNum;
-	uchar	Link;
+struct KillNeighbour {
+	ulong UniqueNum;
+	uchar Link;
 };
 
 struct rioVersion {
-    char        version[MAX_VERSION_LEN];
-    char        relid[MAX_VERSION_LEN];
-    int         buildLevel;
-    char        buildDate[MAX_VERSION_LEN];
+	char version[MAX_VERSION_LEN];
+	char relid[MAX_VERSION_LEN];
+	int buildLevel;
+	char buildDate[MAX_VERSION_LEN];
 };
 
 
@@ -316,16 +300,16 @@ struct rioVersion {
 #define	RIO_SET_XP_CPS    rIOCW(155,int)
 #define RIO_GET_IXANY     rIOCR(156,int)	/* ixany allowed? */
 #define RIO_SET_IXANY     rIOCW(157,int)
-#define RIO_SET_IXANY_ON  rIOCN(158)		/* allow ixany */
-#define RIO_SET_IXANY_OFF rIOCN(159)		/* disallow ixany */
+#define RIO_SET_IXANY_ON  rIOCN(158)	/* allow ixany */
+#define RIO_SET_IXANY_OFF rIOCN(159)	/* disallow ixany */
 #define RIO_GET_MODEM     rIOCR(160,int)	/* port is modem/direct line? */
 #define RIO_SET_MODEM     rIOCW(161,int)
-#define RIO_SET_MODEM_ON  rIOCN(162)		/* port is a modem */
-#define RIO_SET_MODEM_OFF rIOCN(163)		/* port is direct */
+#define RIO_SET_MODEM_ON  rIOCN(162)	/* port is a modem */
+#define RIO_SET_MODEM_OFF rIOCN(163)	/* port is direct */
 #define RIO_GET_IXON      rIOCR(164,int)	/* ixon allowed? */
 #define RIO_SET_IXON      rIOCW(165,int)
-#define RIO_SET_IXON_ON   rIOCN(166)		/* allow ixon */
-#define RIO_SET_IXON_OFF  rIOCN(167)		/* disallow ixon */
+#define RIO_SET_IXON_ON   rIOCN(166)	/* allow ixon */
+#define RIO_SET_IXON_OFF  rIOCN(167)	/* disallow ixon */
 
 #define RIO_GET_SIVIEW	  ((('s')<<8) | 106)	/* backwards compatible with SI */
 

drivers/char/rio/debug.h

@@ -33,7 +33,7 @@
 #define	DBPACKET(pkt, opt, str, chn) 	debug_packet((pkt), (opt), (str), (chn))
 #else
 #define	DBPACKET(pkt, opt, str, c)
-#endif	/* DCIRRUS */
+#endif				/* DCIRRUS */
 
 
-#endif	/* _debug_h_ */
+#endif				/* _debug_h_ */

drivers/char/rio/defaults.h

@@ -37,13 +37,13 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_defaults_h_sccs = "@(#)defaults.h	1.1" ;
+static char *_rio_defaults_h_sccs = "@(#)defaults.h	1.1";
 #endif
 #endif
 
 
-#define MILLISECOND           (int) (1000/64)   /* 15.625 low ticks */
-#define SECOND                (int) 15625       /* Low priority ticks */
+#define MILLISECOND           (int) (1000/64)	/* 15.625 low ticks */
+#define SECOND                (int) 15625	/* Low priority ticks */
 
 #ifdef RTA
 #define RX_LIMIT       (ushort) 3
@@ -56,4 +56,3 @@ static char *_rio_defaults_h_sccs = "@(#)defaults.h	1.1" ;
 
 
 /*********** end of file ***********/
-

drivers/char/rio/eisa.h

@@ -60,7 +60,7 @@ static char *_eisa_h_sccs_ = "@(#)eisa.h	1.2";
 
 #define	EISA_PRODUCT_IDENT_LO		0xC80	/* where RIO_EISA_IDENT is */
 #define	EISA_PRODUCT_IDENT_HI		0xC81
-#define	EISA_PRODUCT_NUMBER		0xC82   /* where PROD_CODE is */
+#define	EISA_PRODUCT_NUMBER		0xC82	/* where PROD_CODE is */
 #define	EISA_REVISION_NUMBER		0xC83	/* revision (1dp) */
 #define	EISA_ENABLE			0xC84	/* set LSB to enable card */
 #define	EISA_UNIQUE_NUM_0		0xC88	/* vomit */
@@ -101,4 +101,4 @@ static char *_eisa_h_sccs_ = "@(#)eisa.h	1.2";
 #define	INBZ(z,x)	inb(((z)<<12) | (x))
 #define	OUTBZ(z,x,y)	outb((((z)<<12) | (x)), y)
 
-#endif /* __rio_eisa_h__ */
+#endif				/* __rio_eisa_h__ */

drivers/char/rio/enable.h

@@ -36,7 +36,7 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_enable_h_sccs = "@(#)enable.h	1.1" ;
+static char *_rio_enable_h_sccs = "@(#)enable.h	1.1";
 #endif
 #endif
 
@@ -46,5 +46,3 @@ static char *_rio_enable_h_sccs = "@(#)enable.h	1.1" ;
 
 
 /*********** end of file ***********/
-
-

drivers/char/rio/error.h

@@ -80,6 +80,3 @@
 
 
 /*********** end of file ***********/
-
-
-

drivers/char/rio/errors.h

@@ -101,4 +101,4 @@ static char *_errors_h_sccs_ = "@(#)errors.h	1.2";
 #define	NOT_ENOUGH_CORE_FOR_PCI_COPY	53
 
 
-#endif /* __rio_errors_h__ */
+#endif				/* __rio_errors_h__ */

drivers/char/rio/formpkt.h

@@ -41,114 +41,113 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_formpkt_h_sccs = "@(#)formpkt.h	1.1" ;
+static char *_rio_formpkt_h_sccs = "@(#)formpkt.h	1.1";
 #endif
 #endif
 
-typedef struct FORM_BOOT_PKT_1 FORM_BOOT_PKT_1 ;
+typedef struct FORM_BOOT_PKT_1 FORM_BOOT_PKT_1;
 struct FORM_BOOT_PKT_1 {
-                           ushort pkt_number ;
-                           ushort pkt_total ;
-                           ushort boot_top ;
-                       } ;
+	ushort pkt_number;
+	ushort pkt_total;
+	ushort boot_top;
+};
 
-typedef struct FORM_BOOT_PKT_2 FORM_BOOT_PKT_2 ;
+typedef struct FORM_BOOT_PKT_2 FORM_BOOT_PKT_2;
 struct FORM_BOOT_PKT_2 {
-                           ushort pkt_number ;
-                           char   boot_data[10] ;
-                       } ;
+	ushort pkt_number;
+	char boot_data[10];
+};
 
 
-typedef struct FORM_ATTACH_RTA   FORM_ATTACH_RTA ;
-struct FORM_ATTACH_RTA  {
-                       char    cmd_code ;
-                       char    booter_serial[4] ;
-                       char    booter_link ;
-                       char    bootee_serial[4] ;
-                       char    bootee_link ;
-                   } ;
+typedef struct FORM_ATTACH_RTA FORM_ATTACH_RTA;
+struct FORM_ATTACH_RTA {
+	char cmd_code;
+	char booter_serial[4];
+	char booter_link;
+	char bootee_serial[4];
+	char bootee_link;
+};
 
 
-typedef struct FORM_BOOT_ID   FORM_BOOT_ID ;
-struct FORM_BOOT_ID  {
-                       char    cmd_code ;
-                       char    bootee_serial[4] ;
-                       char    bootee_prod_id ;
-                       char    bootee_link ;
-                   } ;
+typedef struct FORM_BOOT_ID FORM_BOOT_ID;
+struct FORM_BOOT_ID {
+	char cmd_code;
+	char bootee_serial[4];
+	char bootee_prod_id;
+	char bootee_link;
+};
 
 
 
-typedef struct FORM_ROUTE_1   FORM_ROUTE_1 ;
+typedef struct FORM_ROUTE_1 FORM_ROUTE_1;
 struct FORM_ROUTE_1 {
-                        char     cmd_code ;
-                        char     pkt_number ;
-                        char     total_in_sequence ;
-                        char     unit_id ;
-                        char     host_unit_id ;
-                    } ;
-
-typedef struct FORM_ROUTE_2   FORM_ROUTE_2 ;
+	char cmd_code;
+	char pkt_number;
+	char total_in_sequence;
+	char unit_id;
+	char host_unit_id;
+};
+
+typedef struct FORM_ROUTE_2 FORM_ROUTE_2;
 struct FORM_ROUTE_2 {
-                        char   cmd_code ;
-                        char   pkt_number ;
-                        char   total_in_sequence ;
-                        char   route_data[9] ;
-                    } ;
+	char cmd_code;
+	char pkt_number;
+	char total_in_sequence;
+	char route_data[9];
+};
 
-typedef struct FORM_ROUTE_REQ   FORM_ROUTE_REQ ;
+typedef struct FORM_ROUTE_REQ FORM_ROUTE_REQ;
 struct FORM_ROUTE_REQ {
-                          char   cmd_code ;
-                          char   pkt_number ;
-                          char   total_in_sequence ;
-                          char   route_data[10] ;
-                      } ;
+	char cmd_code;
+	char pkt_number;
+	char total_in_sequence;
+	char route_data[10];
+};
 
 
-typedef struct FORM_ERROR   FORM_ERROR ;
+typedef struct FORM_ERROR FORM_ERROR;
 struct FORM_ERROR {
-                        char   cmd_code ;
-                        char   error_code ;
+	char cmd_code;
+	char error_code;
 
-                    } ;
+};
 
-typedef struct FORM_STATUS   FORM_STATUS ;
+typedef struct FORM_STATUS FORM_STATUS;
 struct FORM_STATUS {
-                        char   cmd_code ;
-                        char   status_code ;
-                        char   last_packet_valid ;
-                        char   tx_buffer ;
-                        char   rx_buffer ;
-                        char   port_status ;
-                        char   phb_status ;
-                    } ;
+	char cmd_code;
+	char status_code;
+	char last_packet_valid;
+	char tx_buffer;
+	char rx_buffer;
+	char port_status;
+	char phb_status;
+};
 
 
-typedef struct FORM_LINK_STATUS   FORM_LINK_STATUS ;
+typedef struct FORM_LINK_STATUS FORM_LINK_STATUS;
 struct FORM_LINK_STATUS {
-                        char    cmd_code ;
-                        char    status_code ;
-                        char    link_number ;
-                        ushort  rx_errors ;
-                        ushort  tx_errors ;
-                        ushort  csum_errors ;
-                        ushort  disconnects ;
-                    } ;
+	char cmd_code;
+	char status_code;
+	char link_number;
+	ushort rx_errors;
+	ushort tx_errors;
+	ushort csum_errors;
+	ushort disconnects;
+};
 
 
 
-typedef struct FORM_PARTITION FORM_PARTITION ;
+typedef struct FORM_PARTITION FORM_PARTITION;
 struct FORM_PARTITION {
-                        char    cmd_code ;
-                        char    status_code ;
-                        char    port_number ;
-                        char    tx_max ;
-                        char    rx_max ;
-                        char    rx_limit ;
-                      } ;
+	char cmd_code;
+	char status_code;
+	char port_number;
+	char tx_max;
+	char rx_max;
+	char rx_limit;
+};
 
 
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/func.h

@@ -47,20 +47,19 @@ int RIOBootCodeHOST(struct rio_info *, register struct DownLoad *);
 int RIOBootCodeUNKNOWN(struct rio_info *, struct DownLoad *);
 void msec_timeout(struct Host *);
 int RIOBootRup(struct rio_info *, uint, struct Host *, struct PKT *);
-int RIOBootOk(struct rio_info *,struct Host *, ulong);
-int RIORtaBound(struct rio_info *, uint); 
+int RIOBootOk(struct rio_info *, struct Host *, ulong);
+int RIORtaBound(struct rio_info *, uint);
 void FillSlot(int, int, uint, struct Host *);
 
 /* riocmd.c */
 int RIOFoadRta(struct Host *, struct Map *);
 int RIOZombieRta(struct Host *, struct Map *);
-int RIOCommandRta(struct rio_info *, uint, int (* func)( struct Host *, 
-								struct Map *));
-int RIOIdentifyRta(struct rio_info *, caddr_t); 
+int RIOCommandRta(struct rio_info *, uint, int (*func) (struct Host *, struct Map *));
+int RIOIdentifyRta(struct rio_info *, caddr_t);
 int RIOKillNeighbour(struct rio_info *, caddr_t);
 int RIOSuspendBootRta(struct Host *, int, int);
 int RIOFoadWakeup(struct rio_info *);
-struct CmdBlk * RIOGetCmdBlk(void);
+struct CmdBlk *RIOGetCmdBlk(void);
 void RIOFreeCmdBlk(struct CmdBlk *);
 int RIOQueueCmdBlk(struct Host *, uint, struct CmdBlk *);
 void RIOPollHostCommands(struct rio_info *, struct Host *);
@@ -71,13 +70,13 @@ void ShowPacket(uint, struct PKT *);
 
 /* rioctrl.c */
 int copyin(int, caddr_t, int);
-int riocontrol(struct rio_info *, dev_t,int,caddr_t,int); 
-int RIOPreemptiveCmd(struct rio_info *,struct Port *,uchar);
+int riocontrol(struct rio_info *, dev_t, int, caddr_t, int);
+int RIOPreemptiveCmd(struct rio_info *, struct Port *, uchar);
 
 /* rioinit.c */
 void rioinit(struct rio_info *, struct RioHostInfo *);
 void RIOInitHosts(struct rio_info *, struct RioHostInfo *);
-void RIOISAinit(struct rio_info *,int);
+void RIOISAinit(struct rio_info *, int);
 int RIODoAT(struct rio_info *, int, int);
 caddr_t RIOCheckForATCard(int);
 int RIOAssignAT(struct rio_info *, int, caddr_t, int);
@@ -85,7 +84,7 @@ int RIOBoardTest(paddr_t, caddr_t, uchar, int);
 void RIOAllocDataStructs(struct rio_info *);
 void RIOSetupDataStructs(struct rio_info *);
 int RIODefaultName(struct rio_info *, struct Host *, uint);
-struct rioVersion * RIOVersid(void);
+struct rioVersion *RIOVersid(void);
 int RIOMapin(paddr_t, int, caddr_t *);
 void RIOMapout(paddr_t, long, caddr_t);
 void RIOHostReset(uint, volatile struct DpRam *, uint);
@@ -108,7 +107,7 @@ void remove_receive(struct Port *);
 
 /* rioroute.c */
 int RIORouteRup(struct rio_info *, uint, struct Host *, struct PKT *);
-void RIOFixPhbs(struct rio_info *, struct Host *, uint); 
+void RIOFixPhbs(struct rio_info *, struct Host *, uint);
 uint GetUnitType(uint);
 int RIOSetChange(struct rio_info *);
 int RIOFindFreeID(struct rio_info *, struct Host *, uint *, uint *);
@@ -116,9 +115,9 @@ int RIOFindFreeID(struct rio_info *, struct Host *, uint *, uint *);
 
 /* riotty.c */
 
-int riotopen(struct tty_struct * tty, struct file * filp);
-int riotclose(void  *ptr);
-int riotioctl(struct rio_info *, struct tty_struct *, register int, register caddr_t); 
+int riotopen(struct tty_struct *tty, struct file *filp);
+int riotclose(void *ptr);
+int riotioctl(struct rio_info *, struct tty_struct *, register int, register caddr_t);
 void ttyseth(struct Port *, struct ttystatics *, struct old_sgttyb *sg);
 
 /* riotable.c */
@@ -127,27 +126,27 @@ int RIOApel(struct rio_info *);
 int RIODeleteRta(struct rio_info *, struct Map *);
 int RIOAssignRta(struct rio_info *, struct Map *);
 int RIOReMapPorts(struct rio_info *, struct Host *, struct Map *);
-int RIOChangeName(struct rio_info *, struct Map*);
+int RIOChangeName(struct rio_info *, struct Map *);
 
 #if 0
 /* riodrvr.c */
-struct rio_info * rio_install(struct RioHostInfo *);
+struct rio_info *rio_install(struct RioHostInfo *);
 int rio_uninstall(register struct rio_info *);
 int rio_open(struct rio_info *, int, struct file *);
 int rio_close(struct rio_info *, struct file *);
 int rio_read(struct rio_info *, struct file *, char *, int);
-int rio_write(struct rio_info *, struct file *	f, char *, int);
+int rio_write(struct rio_info *, struct file *f, char *, int);
 int rio_ioctl(struct rio_info *, struct file *, int, char *);
-int rio_select(struct rio_info *, struct file *	f, int, struct sel *);
-int	rio_intr(char *);
-int rio_isr_thread(char  *);
-struct rio_info * rio_info_store( int cmd, struct rio_info * p);
+int rio_select(struct rio_info *, struct file *f, int, struct sel *);
+int rio_intr(char *);
+int rio_isr_thread(char *);
+struct rio_info *rio_info_store(int cmd, struct rio_info *p);
 #endif
 
-extern int    rio_pcicopy(char *src, char *dst, int n);
-extern int rio_minor (struct tty_struct *tty);
-extern int rio_ismodem (struct tty_struct *tty);
+extern int rio_pcicopy(char *src, char *dst, int n);
+extern int rio_minor(struct tty_struct *tty);
+extern int rio_ismodem(struct tty_struct *tty);
 
-extern void rio_start_card_running (struct Host * HostP);
+extern void rio_start_card_running(struct Host *HostP);
 
-#endif	/* __func_h_def */
+#endif				/* __func_h_def */

drivers/char/rio/host.h

@@ -49,33 +49,32 @@ static char *_host_h_sccs_ = "@(#)host.h	1.2";
 **    Host data structure. This is used for the software equiv. of
 **    the host.
 */
-struct    Host
-{
-    uchar             	    Type;      /* RIO_EISA, RIO_MCA, ... */
-    uchar             	    Ivec;      /* POLLED or ivec number */
-    uchar             	    Mode;      /* Control stuff */
-    uchar                   Slot;      /* Slot */
-    volatile caddr_t        Caddr;     /* KV address of DPRAM */
-    volatile struct DpRam  *CardP;     /* KV address of DPRAM, with overlay */
-    paddr_t          	    PaddrP;    /* Phys. address of DPRAM */
-    char                    Name[MAX_NAME_LEN];  /* The name of the host */
-    uint            	    UniqueNum; /* host unique number */
-    spinlock_t	            HostLock;  /* Lock structure for MPX */
-    /*struct pci_devinfo    PciDevInfo; *//* PCI Bus/Device/Function stuff */
-    /*struct lockb	    HostLock;  *//* Lock structure for MPX */
-    uint                    WorkToBeDone; /* set to true each interrupt */
-    uint                    InIntr;    /* Being serviced? */
-    uint                    IntSrvDone;/* host's interrupt has been serviced */
-    int			    (*Copy)( caddr_t, caddr_t, int ); /* copy func */
-    struct timer_list timer;
-    /*
-    **               I M P O R T A N T !
-    **
-    ** The rest of this data structure is cleared to zero after
-    ** a RIO_HOST_FOAD command.
-    */
-    
-    ulong                   Flags;     /* Whats going down */
+struct Host {
+	uchar Type;		/* RIO_EISA, RIO_MCA, ... */
+	uchar Ivec;		/* POLLED or ivec number */
+	uchar Mode;		/* Control stuff */
+	uchar Slot;		/* Slot */
+	volatile caddr_t Caddr;	/* KV address of DPRAM */
+	volatile struct DpRam *CardP;	/* KV address of DPRAM, with overlay */
+	paddr_t PaddrP;		/* Phys. address of DPRAM */
+	char Name[MAX_NAME_LEN];	/* The name of the host */
+	uint UniqueNum;		/* host unique number */
+	spinlock_t HostLock;	/* Lock structure for MPX */
+	/*struct pci_devinfo    PciDevInfo; *//* PCI Bus/Device/Function stuff */
+	/*struct lockb          HostLock;  *//* Lock structure for MPX */
+	uint WorkToBeDone;	/* set to true each interrupt */
+	uint InIntr;		/* Being serviced? */
+	uint IntSrvDone;	/* host's interrupt has been serviced */
+	int (*Copy) (caddr_t, caddr_t, int);	/* copy func */
+	struct timer_list timer;
+	/*
+	 **               I M P O R T A N T !
+	 **
+	 ** The rest of this data structure is cleared to zero after
+	 ** a RIO_HOST_FOAD command.
+	 */
+
+	ulong Flags;		/* Whats going down */
 #define RC_WAITING            0
 #define RC_STARTUP            1
 #define RC_RUNNING            2
@@ -93,25 +92,25 @@ struct    Host
 #define RC_BOOT_OWN           0x10	/* Only boot RTAs bound to this system */
 #define RC_BOOT_NONE          0x20	/* Don't boot any RTAs (slave mode) */
 
-    struct Top		    Topology[LINKS_PER_UNIT]; /* one per link */
-    struct Map              Mapping[MAX_RUP];     /* Mappings for host */
-    struct PHB		    *PhbP;                /* Pointer to the PHB array */
-    ushort           	    *PhbNumP;             /* Ptr to Number of PHB's */
-    struct LPB 	            *LinkStrP ;           /* Link Structure Array */
-    struct RUP       	    *RupP;                /* Sixteen real rups here */
-    struct PARM_MAP  	    *ParmMapP;            /* points to the parmmap */
-    uint                    ExtraUnits[MAX_EXTRA_UNITS]; /* unknown things */
-    uint                    NumExtraBooted;       /* how many of the above */
-    /*
-    ** Twenty logical rups.
-    ** The first sixteen are the real Rup entries (above), the last four
-    ** are the link RUPs.
-    */
-    struct UnixRup	    UnixRups[MAX_RUP+LINKS_PER_UNIT];
-	int				timeout_id;	/* For calling 100 ms delays */
-	int				timeout_sem;/* For calling 100 ms delays */
-    long locks; /* long req'd for set_bit --RR */
-    char             	    ____end_marker____;
+	struct Top Topology[LINKS_PER_UNIT];	/* one per link */
+	struct Map Mapping[MAX_RUP];	/* Mappings for host */
+	struct PHB *PhbP;	/* Pointer to the PHB array */
+	ushort *PhbNumP;	/* Ptr to Number of PHB's */
+	struct LPB *LinkStrP;	/* Link Structure Array */
+	struct RUP *RupP;	/* Sixteen real rups here */
+	struct PARM_MAP *ParmMapP;	/* points to the parmmap */
+	uint ExtraUnits[MAX_EXTRA_UNITS];	/* unknown things */
+	uint NumExtraBooted;	/* how many of the above */
+	/*
+	 ** Twenty logical rups.
+	 ** The first sixteen are the real Rup entries (above), the last four
+	 ** are the link RUPs.
+	 */
+	struct UnixRup UnixRups[MAX_RUP + LINKS_PER_UNIT];
+	int timeout_id;		/* For calling 100 ms delays */
+	int timeout_sem;	/* For calling 100 ms delays */
+	long locks;		/* long req'd for set_bit --RR */
+	char ____end_marker____;
 };
 #define Control      CardP->DpControl
 #define SetInt       CardP->DpSetInt
@@ -129,6 +128,6 @@ struct    Host
 #define Year         CardP->DpYear
 #define Week         CardP->DpWeek
 
-#define RIO_DUMBPARM 0x0860    /* what not to expect */
+#define RIO_DUMBPARM 0x0860	/* what not to expect */
 
 #endif

drivers/char/rio/hosthw.h

@@ -37,7 +37,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_hosthw_h_sccs = "@(#)hosthw.h	1.2" ;
+static char *_rio_hosthw_h_sccs = "@(#)hosthw.h	1.2";
 #endif
 #endif
 
@@ -53,5 +53,3 @@ static char *_rio_hosthw_h_sccs = "@(#)hosthw.h	1.2" ;
 
 
 /*********** end of file ***********/
-
-

drivers/char/rio/link.h

@@ -70,27 +70,27 @@
 #define  DIE_NOW		(ushort) 0x0200
 
 /* Boot request stuff */
-#define BOOT_REQUEST       ((ushort) 0)    /* Request for a boot */
-#define BOOT_ABORT         ((ushort) 1)    /* Abort a boot */
-#define BOOT_SEQUENCE      ((ushort) 2)    /* Packet with the number of packets
-                                              and load address */
-#define BOOT_COMPLETED     ((ushort) 3)    /* Boot completed */
+#define BOOT_REQUEST       ((ushort) 0)	/* Request for a boot */
+#define BOOT_ABORT         ((ushort) 1)	/* Abort a boot */
+#define BOOT_SEQUENCE      ((ushort) 2)	/* Packet with the number of packets
+					   and load address */
+#define BOOT_COMPLETED     ((ushort) 3)	/* Boot completed */
 
 /* States that a link can be in */
-#define	LINK_DISCONNECTED  ((ushort) 0)    /* Disconnected */
-#define LINK_BOOT1         ((ushort) 1)    /* Trying to send 1st stage boot */
-#define LINK_BOOT2         ((ushort) 2)    /* Trying to send 2nd stage boot */
-#define LINK_BOOT2WAIT     ((ushort) 3)    /* Waiting for selftest results */
-#define LINK_BOOT3         ((ushort) 4)    /* Trying to send 3rd stage boots */
-#define LINK_SYNC          ((ushort) 5)    /* Syncing */
+#define	LINK_DISCONNECTED  ((ushort) 0)	/* Disconnected */
+#define LINK_BOOT1         ((ushort) 1)	/* Trying to send 1st stage boot */
+#define LINK_BOOT2         ((ushort) 2)	/* Trying to send 2nd stage boot */
+#define LINK_BOOT2WAIT     ((ushort) 3)	/* Waiting for selftest results */
+#define LINK_BOOT3         ((ushort) 4)	/* Trying to send 3rd stage boots */
+#define LINK_SYNC          ((ushort) 5)	/* Syncing */
 
-#define LINK_INTRO         ((ushort) 10)    /* Introductory packet */
-#define LINK_SUPPLYID      ((ushort) 11)    /* Trying to supply an ID */
-#define LINK_TOPOLOGY      ((ushort) 12)    /* Send a topology update */
-#define LINK_REQUESTID     ((ushort) 13)    /* Waiting for an ID */
-#define LINK_CONNECTED     ((ushort) 14)    /* Connected */
+#define LINK_INTRO         ((ushort) 10)	/* Introductory packet */
+#define LINK_SUPPLYID      ((ushort) 11)	/* Trying to supply an ID */
+#define LINK_TOPOLOGY      ((ushort) 12)	/* Send a topology update */
+#define LINK_REQUESTID     ((ushort) 13)	/* Waiting for an ID */
+#define LINK_CONNECTED     ((ushort) 14)	/* Connected */
 
-#define LINK_INTERCONNECT  ((ushort) 20)   /* Subnets interconnected */
+#define LINK_INTERCONNECT  ((ushort) 20)	/* Subnets interconnected */
 
 #define LINK_SPARE	   ((ushort) 40)
 
@@ -103,12 +103,12 @@
 ** LED stuff
 */
 #if defined(RTA)
-#define LED_OFF            ((ushort) 0)    /* LED off */
-#define LED_RED            ((ushort) 1)    /* LED Red */
-#define LED_GREEN          ((ushort) 2)    /* LED Green */
-#define LED_ORANGE         ((ushort) 4)    /* LED Orange */
-#define LED_1TO8_OPEN      ((ushort) 1)    /* Port 1->8 LED on */
-#define LED_9TO16_OPEN     ((ushort) 2)    /* Port 9->16 LED on */
+#define LED_OFF            ((ushort) 0)	/* LED off */
+#define LED_RED            ((ushort) 1)	/* LED Red */
+#define LED_GREEN          ((ushort) 2)	/* LED Green */
+#define LED_ORANGE         ((ushort) 4)	/* LED Orange */
+#define LED_1TO8_OPEN      ((ushort) 1)	/* Port 1->8 LED on */
+#define LED_9TO16_OPEN     ((ushort) 2)	/* Port 9->16 LED on */
 #define LED_SET_COLOUR(colour)	(link->led = (colour))
 #define LED_OR_COLOUR(colour)	(link->led |= (colour))
 #define LED_TIMEOUT(time)    (link->led_timeout = RioTimePlus(RioTime(),(time)))
@@ -116,72 +116,72 @@
 #define LED_SET_COLOUR(colour)
 #define LED_OR_COLOUR(colour)
 #define LED_TIMEOUT(time)
-#endif /* RTA */
+#endif				/* RTA */
 
 struct LPB {
-               WORD          link_number ;       /* Link Number */
-               Channel_ptr   in_ch ;             /* Link In Channel */
-               Channel_ptr   out_ch ;            /* Link Out Channel */
+	WORD link_number;	/* Link Number */
+	Channel_ptr in_ch;	/* Link In Channel */
+	Channel_ptr out_ch;	/* Link Out Channel */
 #ifdef RTA
-               uchar        stat_led ;          /* Port open leds */
-               uchar        led ;               /* True, light led! */
+	uchar stat_led;		/* Port open leds */
+	uchar led;		/* True, light led! */
 #endif
-               BYTE attached_serial[4]; /* Attached serial number */
-               BYTE attached_host_serial[4];
-                                                 /* Serial number of Host who
-                                                    booted the other end */
-               WORD          descheduled ;       /* Currently Descheduled */
-               WORD          state;              /* Current state */
-               WORD          send_poll ;         /* Send a Poll Packet */
-               Process_ptr   ltt_p ;             /* Process Descriptor */
-               Process_ptr   lrt_p ;             /* Process Descriptor */
-               WORD          lrt_status ;        /* Current lrt status */
-               WORD          ltt_status ;        /* Current ltt status */
-               WORD          timeout ;           /* Timeout value */
-               WORD          topology;           /* Topology bits */
-               WORD          mon_ltt ;
-               WORD          mon_lrt ;
-               WORD          WaitNoBoot ;	 /* Secs to hold off booting */
-               PKT_ptr       add_packet_list;    /* Add packets to here */
-               PKT_ptr       remove_packet_list; /* Send packets from here */
+	BYTE attached_serial[4];	/* Attached serial number */
+	BYTE attached_host_serial[4];
+	/* Serial number of Host who
+	   booted the other end */
+	WORD descheduled;	/* Currently Descheduled */
+	WORD state;		/* Current state */
+	WORD send_poll;		/* Send a Poll Packet */
+	Process_ptr ltt_p;	/* Process Descriptor */
+	Process_ptr lrt_p;	/* Process Descriptor */
+	WORD lrt_status;	/* Current lrt status */
+	WORD ltt_status;	/* Current ltt status */
+	WORD timeout;		/* Timeout value */
+	WORD topology;		/* Topology bits */
+	WORD mon_ltt;
+	WORD mon_lrt;
+	WORD WaitNoBoot;	/* Secs to hold off booting */
+	PKT_ptr add_packet_list;	/* Add packets to here */
+	PKT_ptr remove_packet_list;	/* Send packets from here */
 #ifdef RTA
 #ifdef DCIRRUS
-#define    QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1) 
+#define    QBUFS_PER_REDIRECT (4 / PKTS_PER_BUFFER + 1)
 #else
-#define    QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1) 
+#define    QBUFS_PER_REDIRECT (8 / PKTS_PER_BUFFER + 1)
 #endif
-               PKT_ptr_ptr   rd_add ;            /* Add a new Packet here */
-               Q_BUF_ptr     rd_add_qb;          /* Pointer to the add Q buf */
-               PKT_ptr_ptr   rd_add_st_qbb ;     /* Pointer to start of the Q's buf */
-               PKT_ptr_ptr   rd_add_end_qbb ;    /* Pointer to the end of the Q's buf */
-               PKT_ptr_ptr   rd_remove ;         /* Remove a Packet here */
-               Q_BUF_ptr     rd_remove_qb ;      /* Pointer to the remove Q buf */
-               PKT_ptr_ptr   rd_remove_st_qbb ;  /* Pointer to the start of the Q buf */
-               PKT_ptr_ptr   rd_remove_end_qbb ; /* Pointer to the end of the Q buf */
-               ushort        pkts_in_q ;         /* Packets in queue */
+	PKT_ptr_ptr rd_add;	/* Add a new Packet here */
+	Q_BUF_ptr rd_add_qb;	/* Pointer to the add Q buf */
+	PKT_ptr_ptr rd_add_st_qbb;	/* Pointer to start of the Q's buf */
+	PKT_ptr_ptr rd_add_end_qbb;	/* Pointer to the end of the Q's buf */
+	PKT_ptr_ptr rd_remove;	/* Remove a Packet here */
+	Q_BUF_ptr rd_remove_qb;	/* Pointer to the remove Q buf */
+	PKT_ptr_ptr rd_remove_st_qbb;	/* Pointer to the start of the Q buf */
+	PKT_ptr_ptr rd_remove_end_qbb;	/* Pointer to the end of the Q buf */
+	ushort pkts_in_q;	/* Packets in queue */
 #endif
 
-               Channel_ptr   lrt_fail_chan ;     /* Lrt's failure channel */
-               Channel_ptr   ltt_fail_chan ;     /* Ltt's failure channel */
+	Channel_ptr lrt_fail_chan;	/* Lrt's failure channel */
+	Channel_ptr ltt_fail_chan;	/* Ltt's failure channel */
 
 #if defined (HOST) || defined (INKERNEL)
- /* RUP structure for HOST to driver communications */
-               struct RUP           rup ;              
+	/* RUP structure for HOST to driver communications */
+	struct RUP rup;
 #endif
-               struct RUP           link_rup;           /* RUP for the link (POLL,
-                                                    topology etc.) */
-               WORD          attached_link ;     /* Number of attached link */
-               WORD          csum_errors ;       /* csum errors */
-               WORD          num_disconnects ;   /* number of disconnects */
-               WORD          num_sync_rcvd ;     /* # sync's received */
-               WORD          num_sync_rqst ;     /* # sync requests */
-               WORD          num_tx ;            /* Num pkts sent */
-               WORD          num_rx ;            /* Num pkts received */
-               WORD          module_attached;    /* Module tpyes of attached */
-               WORD          led_timeout;        /* LED timeout */
-               WORD          first_port;         /* First port to service */
-               WORD          last_port;          /* Last port to service */
-           } ;
+	struct RUP link_rup;	/* RUP for the link (POLL,
+				   topology etc.) */
+	WORD attached_link;	/* Number of attached link */
+	WORD csum_errors;	/* csum errors */
+	WORD num_disconnects;	/* number of disconnects */
+	WORD num_sync_rcvd;	/* # sync's received */
+	WORD num_sync_rqst;	/* # sync requests */
+	WORD num_tx;		/* Num pkts sent */
+	WORD num_rx;		/* Num pkts received */
+	WORD module_attached;	/* Module tpyes of attached */
+	WORD led_timeout;	/* LED timeout */
+	WORD first_port;	/* First port to service */
+	WORD last_port;		/* Last port to service */
+};
 
 #endif
 

drivers/char/rio/linux_compat.h

@@ -41,7 +41,7 @@
 #endif
 
 struct ttystatics {
-  struct termios tm;
+	struct termios tm;
 };
 
 #define bzero(d, n)         memset((d), 0, (n))
@@ -97,26 +97,24 @@ the older driver. The older driver includes "brates.h" which shadows
 the definitions from Linux, and is incompatible... */
 
 /* RxBaud and TxBaud definitions... */
-#define	RIO_B0			0x00			/* RTS / DTR signals dropped */
-#define	RIO_B50			0x01			/* 50 baud */
-#define	RIO_B75			0x02			/* 75 baud */
-#define	RIO_B110		0x03			/* 110 baud */
-#define	RIO_B134		0x04			/* 134.5 baud */
-#define	RIO_B150		0x05			/* 150 baud */
-#define	RIO_B200		0x06			/* 200 baud */
-#define	RIO_B300		0x07			/* 300 baud */
-#define	RIO_B600		0x08			/* 600 baud */
-#define	RIO_B1200		0x09			/* 1200 baud */
-#define	RIO_B1800		0x0A			/* 1800 baud */
-#define	RIO_B2400		0x0B			/* 2400 baud */
-#define	RIO_B4800		0x0C			/* 4800 baud */
-#define	RIO_B9600		0x0D			/* 9600 baud */
-#define	RIO_B19200		0x0E			/* 19200 baud */
-#define	RIO_B38400		0x0F			/* 38400 baud */
-#define	RIO_B56000		0x10			/* 56000 baud */
-#define	RIO_B57600		0x11			/* 57600 baud */
-#define	RIO_B64000		0x12			/* 64000 baud */
-#define	RIO_B115200		0x13			/* 115200 baud */
-#define	RIO_B2000		0x14			/* 2000 baud */
-
-
+#define	RIO_B0			0x00	/* RTS / DTR signals dropped */
+#define	RIO_B50			0x01	/* 50 baud */
+#define	RIO_B75			0x02	/* 75 baud */
+#define	RIO_B110		0x03	/* 110 baud */
+#define	RIO_B134		0x04	/* 134.5 baud */
+#define	RIO_B150		0x05	/* 150 baud */
+#define	RIO_B200		0x06	/* 200 baud */
+#define	RIO_B300		0x07	/* 300 baud */
+#define	RIO_B600		0x08	/* 600 baud */
+#define	RIO_B1200		0x09	/* 1200 baud */
+#define	RIO_B1800		0x0A	/* 1800 baud */
+#define	RIO_B2400		0x0B	/* 2400 baud */
+#define	RIO_B4800		0x0C	/* 4800 baud */
+#define	RIO_B9600		0x0D	/* 9600 baud */
+#define	RIO_B19200		0x0E	/* 19200 baud */
+#define	RIO_B38400		0x0F	/* 38400 baud */
+#define	RIO_B56000		0x10	/* 56000 baud */
+#define	RIO_B57600		0x11	/* 57600 baud */
+#define	RIO_B64000		0x12	/* 64000 baud */
+#define	RIO_B115200		0x13	/* 115200 baud */
+#define	RIO_B2000		0x14	/* 2000 baud */

drivers/char/rio/list.h

@@ -38,7 +38,7 @@
 
 #ifdef SCCS_LABELS
 #ifndef lint
-static char *_rio_list_h_sccs = "@(#)list.h	1.9" ;
+static char *_rio_list_h_sccs = "@(#)list.h	1.9";
 #endif
 #endif
 
@@ -166,7 +166,7 @@ static char *_rio_list_h_sccs = "@(#)list.h	1.9" ;
 #endif
 
 
-#else /* !IN_KERNEL */
+#else				/* !IN_KERNEL */
 
 #define ZERO_PTR NULL
 
@@ -192,5 +192,5 @@ static char *_rio_list_h_sccs = "@(#)list.h	1.9" ;
 #define splx(oldspl)    if ((oldspl) == 0) spl0()
 #endif
 
-#endif /* ifndef _list.h */
+#endif				/* ifndef _list.h */
 /*********** end of file ***********/

drivers/char/rio/lrt.h

@@ -36,7 +36,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_lrt_h_sccs = "@(#)lrt.h	1.1" ;
+static char *_rio_lrt_h_sccs = "@(#)lrt.h	1.1";
 #endif
 #endif
 
@@ -50,6 +50,3 @@ static char *_rio_lrt_h_sccs = "@(#)lrt.h	1.1" ;
 
 
 /*********** end of file ***********/
-
-
-

drivers/char/rio/ltt.h

@@ -36,7 +36,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_ltt_h_sccs = "@(#)ltt.h	1.1" ;
+static char *_rio_ltt_h_sccs = "@(#)ltt.h	1.1";
 #endif
 #endif
 
@@ -45,11 +45,8 @@ static char *_rio_ltt_h_sccs = "@(#)ltt.h	1.1" ;
 #else
 #define LTT_STACK       (ushort) 200
 #endif
- 
 
 
 
-/*********** end of file ***********/
-
-
 
+/*********** end of file ***********/

drivers/char/rio/lttwake.h

@@ -39,7 +39,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_lttwake_h_sccs = "@(#)lttwake.h	1.1" ;
+static char *_rio_lttwake_h_sccs = "@(#)lttwake.h	1.1";
 #endif
 #endif
 
@@ -48,6 +48,3 @@ static char *_rio_lttwake_h_sccs = "@(#)lttwake.h	1.1" ;
 
 
 /*********** end of file ***********/
-
-
-

drivers/char/rio/map.h

@@ -46,21 +46,20 @@ static char *_map_h_sccs_ = "@(#)map.h	1.2";
 #define	TOTAL_MAP_ENTRIES (MAX_MAP_ENTRY*RIO_SLOTS)
 #define	MAX_NAME_LEN 32
 
-struct Map
-{
-	uint	HostUniqueNum;	        /* Supporting hosts unique number */
-	uint	RtaUniqueNum;	        /* Unique number */
+struct Map {
+	uint HostUniqueNum;	/* Supporting hosts unique number */
+	uint RtaUniqueNum;	/* Unique number */
 	/*
-	** The next two IDs must be swapped on big-endian architectures
-	** when using a v2.04 /etc/rio/config with a v3.00 driver (when
-	** upgrading for example).
-	*/
-	ushort	ID;			/* ID used in the subnet */
-	ushort	ID2;			/* ID of 2nd block of 8 for 16 port */
-	ulong	Flags;			/* Booted, ID Given, Disconnected */
-	ulong	SysPort;		/* First tty mapped to this port */
-	struct Top   Topology[LINKS_PER_UNIT];	/* ID connected to each link */
-	char	Name[MAX_NAME_LEN];        /* Cute name by which RTA is known */
+	 ** The next two IDs must be swapped on big-endian architectures
+	 ** when using a v2.04 /etc/rio/config with a v3.00 driver (when
+	 ** upgrading for example).
+	 */
+	ushort ID;		/* ID used in the subnet */
+	ushort ID2;		/* ID of 2nd block of 8 for 16 port */
+	ulong Flags;		/* Booted, ID Given, Disconnected */
+	ulong SysPort;		/* First tty mapped to this port */
+	struct Top Topology[LINKS_PER_UNIT];	/* ID connected to each link */
+	char Name[MAX_NAME_LEN];	/* Cute name by which RTA is known */
 };
 
 /*

drivers/char/rio/mca.h

@@ -70,4 +70,4 @@ static char *_mca_h_sccs_ = "@(#)mca.h	1.2";
 
 #define	RIO_MCA_DEFAULT_MODE	SLOW_LINKS
 
-#endif	/* __rio_mca_h__ */
+#endif				/* __rio_mca_h__ */

drivers/char/rio/mesg.h

@@ -38,4 +38,4 @@ static char *_mesg_h_sccs_ = "@(#)mesg.h	1.2";
 #endif
 
 
-#endif /* __rio_mesg_h__ */
+#endif				/* __rio_mesg_h__ */

drivers/char/rio/param.h

@@ -42,20 +42,19 @@ static char *_param_h_sccs_ = "@(#)param.h	1.2";
 ** the param command block, as used in OPEN and PARAM calls.
 */
 
-struct phb_param
-{
-    BYTE    Cmd;        /* It is very important that these line up */
-    BYTE    Cor1;       /* with what is expected at the other end. */
-    BYTE    Cor2;       /* to confirm that you've got it right,    */
-    BYTE    Cor4;       /* check with cirrus/cirrus.h              */
-    BYTE    Cor5;
-    BYTE    TxXon;	/* Transmit X-On character */
-    BYTE    TxXoff;	/* Transmit X-Off character */
-    BYTE    RxXon;	/* Receive X-On character */
-    BYTE    RxXoff;	/* Receive X-Off character */
-    BYTE    LNext;	/* Literal-next character */
-    BYTE    TxBaud;	/* Transmit baudrate */
-    BYTE    RxBaud;	/* Receive baudrate */
+struct phb_param {
+	BYTE Cmd;		/* It is very important that these line up */
+	BYTE Cor1;		/* with what is expected at the other end. */
+	BYTE Cor2;		/* to confirm that you've got it right,    */
+	BYTE Cor4;		/* check with cirrus/cirrus.h              */
+	BYTE Cor5;
+	BYTE TxXon;		/* Transmit X-On character */
+	BYTE TxXoff;		/* Transmit X-Off character */
+	BYTE RxXon;		/* Receive X-On character */
+	BYTE RxXoff;		/* Receive X-Off character */
+	BYTE LNext;		/* Literal-next character */
+	BYTE TxBaud;		/* Transmit baudrate */
+	BYTE RxBaud;		/* Receive baudrate */
 };
 
 #endif

drivers/char/rio/parmmap.h

@@ -44,53 +44,50 @@
 #endif
 #endif
 
-typedef struct PARM_MAP PARM_MAP ;
+typedef struct PARM_MAP PARM_MAP;
 
-struct PARM_MAP
-{
-PHB_ptr           phb_ptr ;              /* Pointer to the PHB array */
-WORD_ptr          phb_num_ptr ;          /* Ptr to Number of PHB's */
-FREE_LIST_ptr     free_list;             /* Free List pointer */
-FREE_LIST_ptr     free_list_end;         /* Free List End pointer */
-Q_BUF_ptr_ptr     q_free_list_ptr ;      /* Ptr to Q_BUF variable */
-BYTE_ptr          unit_id_ptr ;          /* Unit Id */
-LPB_ptr           link_str_ptr ;         /* Link Structure Array */
-BYTE_ptr          bootloader_1 ;         /* 1st Stage Boot Loader */
-BYTE_ptr          bootloader_2 ;         /* 2nd Stage Boot Loader */
-WORD_ptr          port_route_map_ptr ;   /* Port Route Map */
-ROUTE_STR_ptr     route_ptr ;            /* Unit Route Map */
-NUMBER_ptr        map_present ;          /* Route Map present */
-NUMBER            pkt_num ;               /* Total number of packets */
-NUMBER            q_num ;                 /* Total number of Q packets */
-WORD              buffers_per_port ;      /* Number of buffers per port */
-WORD              heap_size ;             /* Initial size of heap */
-WORD              heap_left ;             /* Current Heap left */
-WORD              error ;                 /* Error code */
-WORD              tx_max;                 /* Max number of tx pkts per phb */
-WORD              rx_max;                 /* Max number of rx pkts per phb */
-WORD              rx_limit;               /* For high / low watermarks */
-NUMBER            links ;                 /* Links to use */
-NUMBER            timer ;                 /* Interrupts per second */
-RUP_ptr           rups ;                 /* Pointer to the RUPs */
-WORD              max_phb ;              /* Mostly for debugging */
-WORD              living ;               /* Just increments!! */
-WORD              init_done ;            /* Initialisation over */
-WORD              booting_link ;
-WORD              idle_count ;           /* Idle time counter */
-WORD              busy_count ;           /* Busy counter */
-WORD              idle_control ;         /* Control Idle Process */
+struct PARM_MAP {
+	PHB_ptr phb_ptr;	/* Pointer to the PHB array */
+	WORD_ptr phb_num_ptr;	/* Ptr to Number of PHB's */
+	FREE_LIST_ptr free_list;	/* Free List pointer */
+	FREE_LIST_ptr free_list_end;	/* Free List End pointer */
+	Q_BUF_ptr_ptr q_free_list_ptr;	/* Ptr to Q_BUF variable */
+	BYTE_ptr unit_id_ptr;	/* Unit Id */
+	LPB_ptr link_str_ptr;	/* Link Structure Array */
+	BYTE_ptr bootloader_1;	/* 1st Stage Boot Loader */
+	BYTE_ptr bootloader_2;	/* 2nd Stage Boot Loader */
+	WORD_ptr port_route_map_ptr;	/* Port Route Map */
+	ROUTE_STR_ptr route_ptr;	/* Unit Route Map */
+	NUMBER_ptr map_present;	/* Route Map present */
+	NUMBER pkt_num;		/* Total number of packets */
+	NUMBER q_num;		/* Total number of Q packets */
+	WORD buffers_per_port;	/* Number of buffers per port */
+	WORD heap_size;		/* Initial size of heap */
+	WORD heap_left;		/* Current Heap left */
+	WORD error;		/* Error code */
+	WORD tx_max;		/* Max number of tx pkts per phb */
+	WORD rx_max;		/* Max number of rx pkts per phb */
+	WORD rx_limit;		/* For high / low watermarks */
+	NUMBER links;		/* Links to use */
+	NUMBER timer;		/* Interrupts per second */
+	RUP_ptr rups;		/* Pointer to the RUPs */
+	WORD max_phb;		/* Mostly for debugging */
+	WORD living;		/* Just increments!! */
+	WORD init_done;		/* Initialisation over */
+	WORD booting_link;
+	WORD idle_count;	/* Idle time counter */
+	WORD busy_count;	/* Busy counter */
+	WORD idle_control;	/* Control Idle Process */
 #if defined(HOST) || defined(INKERNEL)
-WORD              tx_intr;               /* TX interrupt pending */
-WORD              rx_intr;               /* RX interrupt pending */
-WORD              rup_intr;              /* RUP interrupt pending */
+	WORD tx_intr;		/* TX interrupt pending */
+	WORD rx_intr;		/* RX interrupt pending */
+	WORD rup_intr;		/* RUP interrupt pending */
 #endif
 #if defined(RTA)
-WORD		  dying_count;		/* Count of processes dead */
+	WORD dying_count;	/* Count of processes dead */
 #endif
-} ;
+};
 
 #endif
 
 /*********** end of file ***********/
-
-

drivers/char/rio/pci.h

@@ -73,4 +73,4 @@ static char *_pci_h_sccs_ = "@(#)pci.h	1.2";
 
 #define	RIO_PCI_DEFAULT_MODE	0x05
 
-#endif	/* __rio_pci_h__ */
+#endif				/* __rio_pci_h__ */

drivers/char/rio/phb.h

@@ -58,37 +58,37 @@
 /*************************************************
  * Handshake asserted. Deasserted by the LTT(s)
  ************************************************/
-#define PHB_HANDSHAKE_SET      ((ushort) 0x001) /* Set by LRT */
+#define PHB_HANDSHAKE_SET      ((ushort) 0x001)	/* Set by LRT */
 
-#define PHB_HANDSHAKE_RESET     ((ushort) 0x002) /* Set by ISR / driver */
+#define PHB_HANDSHAKE_RESET     ((ushort) 0x002)	/* Set by ISR / driver */
 
 #define PHB_HANDSHAKE_FLAGS     (PHB_HANDSHAKE_RESET | PHB_HANDSHAKE_SET)
-                                                /* Reset by ltt */
+						/* Reset by ltt */
 
 
 /*************************************************
  * Maximum number of PHB's
  ************************************************/
 #if defined (HOST) || defined (INKERNEL)
-#define MAX_PHB               ((ushort) 128)  /* range 0-127 */
+#define MAX_PHB               ((ushort) 128)	/* range 0-127 */
 #else
-#define MAX_PHB               ((ushort) 8)    /* range 0-7 */
+#define MAX_PHB               ((ushort) 8)	/* range 0-7 */
 #endif
 
 /*************************************************
  * Defines for the mode fields
  ************************************************/
-#define TXPKT_INCOMPLETE        0x0001  /* Previous tx packet not completed */
-#define TXINTR_ENABLED          0x0002  /* Tx interrupt is enabled */
-#define TX_TAB3                 0x0004  /* TAB3 mode */
-#define TX_OCRNL                0x0008  /* OCRNL mode */
-#define TX_ONLCR                0x0010  /* ONLCR mode */
-#define TX_SENDSPACES           0x0020  /* Send n spaces command needs 
-                                           completing */
-#define TX_SENDNULL             0x0040  /* Escaping NULL needs completing */
-#define TX_SENDLF               0x0080  /* LF -> CR LF needs completing */
-#define TX_PARALLELBUG          0x0100  /* CD1400 LF -> CR LF bug on parallel
-                                           port */
+#define TXPKT_INCOMPLETE        0x0001	/* Previous tx packet not completed */
+#define TXINTR_ENABLED          0x0002	/* Tx interrupt is enabled */
+#define TX_TAB3                 0x0004	/* TAB3 mode */
+#define TX_OCRNL                0x0008	/* OCRNL mode */
+#define TX_ONLCR                0x0010	/* ONLCR mode */
+#define TX_SENDSPACES           0x0020	/* Send n spaces command needs
+					   completing */
+#define TX_SENDNULL             0x0040	/* Escaping NULL needs completing */
+#define TX_SENDLF               0x0080	/* LF -> CR LF needs completing */
+#define TX_PARALLELBUG          0x0100	/* CD1400 LF -> CR LF bug on parallel
+					   port */
 #define TX_HANGOVER             (TX_SENDSPACES | TX_SENDLF | TX_SENDNULL)
 #define TX_DTRFLOW		0x0200	/* DTR tx flow control */
 #define	TX_DTRFLOWED		0x0400	/* DTR is low - don't allow more data
@@ -96,34 +96,34 @@
 #define	TX_DATAINFIFO		0x0800	/* There is data in the FIFO */
 #define	TX_BUSY			0x1000	/* Data in FIFO, shift or holding regs */
 
-#define RX_SPARE	        0x0001   /* SPARE */
-#define RXINTR_ENABLED          0x0002   /* Rx interrupt enabled */
-#define RX_ICRNL                0x0008   /* ICRNL mode */
-#define RX_INLCR                0x0010   /* INLCR mode */
-#define RX_IGNCR                0x0020   /* IGNCR mode */
-#define RX_CTSFLOW              0x0040   /* CTSFLOW enabled */
-#define RX_IXOFF                0x0080   /* IXOFF enabled */
-#define RX_CTSFLOWED            0x0100   /* CTSFLOW and CTS dropped */
-#define RX_IXOFFED              0x0200   /* IXOFF and xoff sent */
-#define RX_BUFFERED		0x0400	 /* Try and pass on complete packets */
+#define RX_SPARE	        0x0001	/* SPARE */
+#define RXINTR_ENABLED          0x0002	/* Rx interrupt enabled */
+#define RX_ICRNL                0x0008	/* ICRNL mode */
+#define RX_INLCR                0x0010	/* INLCR mode */
+#define RX_IGNCR                0x0020	/* IGNCR mode */
+#define RX_CTSFLOW              0x0040	/* CTSFLOW enabled */
+#define RX_IXOFF                0x0080	/* IXOFF enabled */
+#define RX_CTSFLOWED            0x0100	/* CTSFLOW and CTS dropped */
+#define RX_IXOFFED              0x0200	/* IXOFF and xoff sent */
+#define RX_BUFFERED		0x0400	/* Try and pass on complete packets */
 
-#define PORT_ISOPEN             0x0001  /* Port open? */
-#define PORT_HUPCL              0x0002  /* Hangup on close? */
-#define PORT_MOPENPEND          0x0004  /* Modem open pending */
-#define PORT_ISPARALLEL         0x0008  /* Parallel port */
-#define PORT_BREAK              0x0010  /* Port on break */
-#define PORT_STATUSPEND		0x0020  /* Status packet pending */
-#define PORT_BREAKPEND          0x0040  /* Break packet pending */
-#define PORT_MODEMPEND          0x0080  /* Modem status packet pending */
-#define PORT_PARALLELBUG        0x0100  /* CD1400 LF -> CR LF bug on parallel
-                                           port */
-#define PORT_FULLMODEM          0x0200  /* Full modem signals */
-#define PORT_RJ45               0x0400  /* RJ45 connector - no RI signal */
-#define PORT_RESTRICTED         0x0600  /* Restricted connector - no RI / DTR */
+#define PORT_ISOPEN             0x0001	/* Port open? */
+#define PORT_HUPCL              0x0002	/* Hangup on close? */
+#define PORT_MOPENPEND          0x0004	/* Modem open pending */
+#define PORT_ISPARALLEL         0x0008	/* Parallel port */
+#define PORT_BREAK              0x0010	/* Port on break */
+#define PORT_STATUSPEND		0x0020	/* Status packet pending */
+#define PORT_BREAKPEND          0x0040	/* Break packet pending */
+#define PORT_MODEMPEND          0x0080	/* Modem status packet pending */
+#define PORT_PARALLELBUG        0x0100	/* CD1400 LF -> CR LF bug on parallel
+					   port */
+#define PORT_FULLMODEM          0x0200	/* Full modem signals */
+#define PORT_RJ45               0x0400	/* RJ45 connector - no RI signal */
+#define PORT_RESTRICTED         0x0600	/* Restricted connector - no RI / DTR */
 
-#define PORT_MODEMBITS          0x0600  /* Mask for modem fields */
+#define PORT_MODEMBITS          0x0600	/* Mask for modem fields */
 
-#define PORT_WCLOSE             0x0800  /* Waiting for close */
+#define PORT_WCLOSE             0x0800	/* Waiting for close */
 #define	PORT_HANDSHAKEFIX	0x1000	/* Port has H/W flow control fix */
 #define	PORT_WASPCLOSED		0x2000	/* Port closed with PCLOSE */
 #define	DUMPMODE		0x4000	/* Dump RTA mem */
@@ -155,139 +155,128 @@
 #define rx_end       u4.s1.rx_end_ptr_ptr
 #define rx_remove    u4.s1.rx_remove_ptr_ptr
 #endif
-typedef struct PHB PHB ;
+typedef struct PHB PHB;
 struct PHB {
 #ifdef RTA
-        ushort      port;
+	ushort port;
 #endif
 #ifdef INKERNEL
-        WORD      source;
+	WORD source;
 #else
-        union       
-        {
-            ushort source;              /* Complete source */
-            struct
-            {
-                unsigned char unit;     /* Source unit */
-                unsigned char port;     /* Source port */
-            } s2;
-        } u2;
+	union {
+		ushort source;	/* Complete source */
+		struct {
+			unsigned char unit;	/* Source unit */
+			unsigned char port;	/* Source port */
+		} s2;
+	} u2;
 #endif
-        WORD      handshake ;
-        WORD      status ;
-        NUMBER       timeout ;           /* Maximum of 1.9 seconds */
-        WORD      link ;              /* Send down this link */
+	WORD handshake;
+	WORD status;
+	NUMBER timeout;		/* Maximum of 1.9 seconds */
+	WORD link;		/* Send down this link */
 #ifdef INKERNEL
-        WORD      destination;
+	WORD destination;
 #else
-        union       
-        {
-            ushort destination;         /* Complete destination */
-            struct
-            {
-                unsigned char unit;     /* Destination unit */
-                unsigned char port;     /* Destination port */
-            } s1;
-        } u1;
+	union {
+		ushort destination;	/* Complete destination */
+		struct {
+			unsigned char unit;	/* Destination unit */
+			unsigned char port;	/* Destination port */
+		} s1;
+	} u1;
 #endif
 #ifdef RTA
-        ushort      tx_pkts_added;
-        ushort      tx_pkts_removed;
-        Q_BUF_ptr   tx_q_start ;        /* Start of the Q list chain */
-        short       num_tx_q_bufs ;     /* Number of Q buffers in the chain */
-        PKT_ptr_ptr tx_add ;            /* Add a new Packet here */
-        Q_BUF_ptr   tx_add_qb;          /* Pointer to the add Q buf */
-        PKT_ptr_ptr tx_add_st_qbb ;     /* Pointer to start of the Q's buf */
-        PKT_ptr_ptr tx_add_end_qbb ;    /* Pointer to the end of the Q's buf */
-        PKT_ptr_ptr tx_remove ;         /* Remove a Packet here */
-        Q_BUF_ptr   tx_remove_qb ;      /* Pointer to the remove Q buf */
-        PKT_ptr_ptr tx_remove_st_qbb ;  /* Pointer to the start of the Q buf */
-        PKT_ptr_ptr tx_remove_end_qbb ; /* Pointer to the end of the Q buf */
+	ushort tx_pkts_added;
+	ushort tx_pkts_removed;
+	Q_BUF_ptr tx_q_start;	/* Start of the Q list chain */
+	short num_tx_q_bufs;	/* Number of Q buffers in the chain */
+	PKT_ptr_ptr tx_add;	/* Add a new Packet here */
+	Q_BUF_ptr tx_add_qb;	/* Pointer to the add Q buf */
+	PKT_ptr_ptr tx_add_st_qbb;	/* Pointer to start of the Q's buf */
+	PKT_ptr_ptr tx_add_end_qbb;	/* Pointer to the end of the Q's buf */
+	PKT_ptr_ptr tx_remove;	/* Remove a Packet here */
+	Q_BUF_ptr tx_remove_qb;	/* Pointer to the remove Q buf */
+	PKT_ptr_ptr tx_remove_st_qbb;	/* Pointer to the start of the Q buf */
+	PKT_ptr_ptr tx_remove_end_qbb;	/* Pointer to the end of the Q buf */
 #endif
 #ifdef INKERNEL
-        PKT_ptr_ptr tx_start ;
-        PKT_ptr_ptr tx_end ;
-        PKT_ptr_ptr tx_add ;
-        PKT_ptr_ptr tx_remove ;
+	PKT_ptr_ptr tx_start;
+	PKT_ptr_ptr tx_end;
+	PKT_ptr_ptr tx_add;
+	PKT_ptr_ptr tx_remove;
 #endif
 #ifdef HOST
-        union
-        {
-            struct
-            {
-                PKT_ptr_ptr tx_start_ptr_ptr;
-                PKT_ptr_ptr tx_end_ptr_ptr;
-                PKT_ptr_ptr tx_add_ptr_ptr;
-                PKT_ptr_ptr tx_remove_ptr_ptr;
-            } s1;
-            struct
-            {
-                ushort * tx_start_ptr;
-                ushort * tx_end_ptr;
-                ushort * tx_add_ptr;
-                ushort * tx_remove_ptr;
-            } s2;
-        } u3;
+	union {
+		struct {
+			PKT_ptr_ptr tx_start_ptr_ptr;
+			PKT_ptr_ptr tx_end_ptr_ptr;
+			PKT_ptr_ptr tx_add_ptr_ptr;
+			PKT_ptr_ptr tx_remove_ptr_ptr;
+		} s1;
+		struct {
+			ushort *tx_start_ptr;
+			ushort *tx_end_ptr;
+			ushort *tx_add_ptr;
+			ushort *tx_remove_ptr;
+		} s2;
+	} u3;
 #endif
 
 #ifdef  RTA
-        ushort      rx_pkts_added;
-        ushort      rx_pkts_removed;
-        Q_BUF_ptr   rx_q_start ;        /* Start of the Q list chain */
-        short       num_rx_q_bufs ;     /* Number of Q buffers in the chain */
-        PKT_ptr_ptr rx_add ;            /* Add a new Packet here */
-        Q_BUF_ptr   rx_add_qb ;         /* Pointer to the add Q buf */
-        PKT_ptr_ptr rx_add_st_qbb ;     /* Pointer to start of the Q's buf */
-        PKT_ptr_ptr rx_add_end_qbb ;    /* Pointer to the end of the Q's buf */
-        PKT_ptr_ptr rx_remove ;         /* Remove a Packet here */
-        Q_BUF_ptr   rx_remove_qb ;      /* Pointer to the remove Q buf */
-        PKT_ptr_ptr rx_remove_st_qbb ;  /* Pointer to the start of the Q buf */
-        PKT_ptr_ptr rx_remove_end_qbb ; /* Pointer to the end of the Q buf */
+	ushort rx_pkts_added;
+	ushort rx_pkts_removed;
+	Q_BUF_ptr rx_q_start;	/* Start of the Q list chain */
+	short num_rx_q_bufs;	/* Number of Q buffers in the chain */
+	PKT_ptr_ptr rx_add;	/* Add a new Packet here */
+	Q_BUF_ptr rx_add_qb;	/* Pointer to the add Q buf */
+	PKT_ptr_ptr rx_add_st_qbb;	/* Pointer to start of the Q's buf */
+	PKT_ptr_ptr rx_add_end_qbb;	/* Pointer to the end of the Q's buf */
+	PKT_ptr_ptr rx_remove;	/* Remove a Packet here */
+	Q_BUF_ptr rx_remove_qb;	/* Pointer to the remove Q buf */
+	PKT_ptr_ptr rx_remove_st_qbb;	/* Pointer to the start of the Q buf */
+	PKT_ptr_ptr rx_remove_end_qbb;	/* Pointer to the end of the Q buf */
 #endif
 #ifdef INKERNEL
-        PKT_ptr_ptr rx_start ;
-        PKT_ptr_ptr rx_end ;
-        PKT_ptr_ptr rx_add ;
-        PKT_ptr_ptr rx_remove ;
+	PKT_ptr_ptr rx_start;
+	PKT_ptr_ptr rx_end;
+	PKT_ptr_ptr rx_add;
+	PKT_ptr_ptr rx_remove;
 #endif
 #ifdef HOST
-        union
-        {
-            struct
-            {
-                PKT_ptr_ptr rx_start_ptr_ptr;
-                PKT_ptr_ptr rx_end_ptr_ptr;
-                PKT_ptr_ptr rx_add_ptr_ptr;
-                PKT_ptr_ptr rx_remove_ptr_ptr;
-            } s1;
-            struct
-            {
-                ushort * rx_start_ptr;
-                ushort * rx_end_ptr;
-                ushort * rx_add_ptr;
-                ushort * rx_remove_ptr;
-            } s2;
-        } u4;
+	union {
+		struct {
+			PKT_ptr_ptr rx_start_ptr_ptr;
+			PKT_ptr_ptr rx_end_ptr_ptr;
+			PKT_ptr_ptr rx_add_ptr_ptr;
+			PKT_ptr_ptr rx_remove_ptr_ptr;
+		} s1;
+		struct {
+			ushort *rx_start_ptr;
+			ushort *rx_end_ptr;
+			ushort *rx_add_ptr;
+			ushort *rx_remove_ptr;
+		} s2;
+	} u4;
 #endif
 
-#ifdef RTA                              /* some fields for the remotes */
-        ushort     flush_count;		/* Count of write flushes */
-        ushort     txmode;		/* Modes for tx */
-        ushort     rxmode;		/* Modes for rx */
-        ushort     portmode;		/* Generic modes */
-        ushort     column;		/* TAB3 column count */
-        ushort     tx_subscript;	/* (TX) Subscript into data field */
-        ushort     rx_subscript;	/* (RX) Subscript into data field */
-        PKT_ptr    rx_incomplete;	/* Hold an incomplete packet here */
-        ushort     modem_bits;		/* Modem bits to mask */
-	ushort	   lastModem;		/* Modem control lines. */
-        ushort     addr;		/* Address for sub commands */
-        ushort     MonitorTstate;	/* TRUE if monitoring tstop */
+#ifdef RTA			/* some fields for the remotes */
+	ushort flush_count;	/* Count of write flushes */
+	ushort txmode;		/* Modes for tx */
+	ushort rxmode;		/* Modes for rx */
+	ushort portmode;	/* Generic modes */
+	ushort column;		/* TAB3 column count */
+	ushort tx_subscript;	/* (TX) Subscript into data field */
+	ushort rx_subscript;	/* (RX) Subscript into data field */
+	PKT_ptr rx_incomplete;	/* Hold an incomplete packet here */
+	ushort modem_bits;	/* Modem bits to mask */
+	ushort lastModem;	/* Modem control lines. */
+	ushort addr;		/* Address for sub commands */
+	ushort MonitorTstate;	/* TRUE if monitoring tstop */
 #endif
 
-        } ;
+};
 
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/pkt.h

@@ -69,52 +69,44 @@
 #define CONTROL_PKT_TTL_MASK (PKT_TTL_MASK << 8)
 #define CONTROL_DATA_WNDW  (DATA_WNDW << 8)
 
-struct PKT    {
+struct PKT {
 #ifdef INKERNEL
-                   BYTE    dest_unit ;    /* Destination Unit Id */
-                   BYTE    dest_port ;    /* Destination POrt */
-                   BYTE    src_unit ;     /* Source Unit Id */
-                   BYTE    src_port ;     /* Source POrt */
+	BYTE dest_unit;		/* Destination Unit Id */
+	BYTE dest_port;		/* Destination POrt */
+	BYTE src_unit;		/* Source Unit Id */
+	BYTE src_port;		/* Source POrt */
 #else
-                   union       
-                   {
-                       ushort destination;         /* Complete destination */
-                       struct
-                       {
-                           unsigned char unit;     /* Destination unit */
-                           unsigned char port;     /* Destination port */
-                       } s1;
-                   } u1;
-                   union       
-                   {
-                       ushort source;              /* Complete source */
-                       struct
-                       {
-                           unsigned char unit;     /* Source unit */
-                           unsigned char port;     /* Source port */
-                       } s2;
-                   } u2;
+	union {
+		ushort destination;	/* Complete destination */
+		struct {
+			unsigned char unit;	/* Destination unit */
+			unsigned char port;	/* Destination port */
+		} s1;
+	} u1;
+	union {
+		ushort source;	/* Complete source */
+		struct {
+			unsigned char unit;	/* Source unit */
+			unsigned char port;	/* Source port */
+		} s2;
+	} u2;
 #endif
 #ifdef INKERNEL
-                   BYTE len ;
-                   BYTE control;
+	BYTE len;
+	BYTE control;
 #else
-                   union
-                   {
-                        ushort      control;
-                        struct
-                        {
-                            unsigned char len;
-                            unsigned char control;
-                        } s3;
-                    } u3;
+	union {
+		ushort control;
+		struct {
+			unsigned char len;
+			unsigned char control;
+		} s3;
+	} u3;
 #endif
-                   BYTE    data[PKT_MAX_DATA_LEN] ;     
-                                                   /* Actual data :-) */
-                   WORD  csum ;                  /* C-SUM */
-               } ;
+	BYTE data[PKT_MAX_DATA_LEN];
+	/* Actual data :-) */
+	WORD csum;		/* C-SUM */
+};
 #endif
 
 /*********** end of file ***********/
-
-

drivers/char/rio/poll.h

@@ -39,7 +39,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_poll_h_sccs = "@(#)poll.h	1.2" ;
+static char *_rio_poll_h_sccs = "@(#)poll.h	1.2";
 #endif
 #endif
 
@@ -54,23 +54,20 @@ static char *_rio_poll_h_sccs = "@(#)poll.h	1.2" ;
 #define POLL_PERIOD           (int) SECOND
 
 /* The various poll commands */
-#define POLL_POLL             0            /* We are connected and happy.. */
-#define POLL_INTRO            1            /* Introduction packet */
-#define POLL_TOPOLOGY         2            /* Topology update */
-#define POLL_ASSIGN           3            /* ID assign */
-#define POLL_FOAD             4            /* F*** Off And Die */
-#define POLL_LMD	      5		   /* Let Me Die */
-#define POLL_DYB	      6		   /* Die You Ba***** */
+#define POLL_POLL             0	/* We are connected and happy.. */
+#define POLL_INTRO            1	/* Introduction packet */
+#define POLL_TOPOLOGY         2	/* Topology update */
+#define POLL_ASSIGN           3	/* ID assign */
+#define POLL_FOAD             4	/* F*** Off And Die */
+#define POLL_LMD	      5	/* Let Me Die */
+#define POLL_DYB	      6	/* Die You Ba***** */
 
 /* The way data fields are split up for POLL packets */
-#define POLL_HOST_SERIAL      2            /* Host who booted me */
-#define POLL_MY_SERIAL        6            /* My serial number */
-#define POLL_YOUR_ID          1            /* Your ID number */
-#define POLL_TOPOLOGY_FIELDS  2            /* Topology maps */
+#define POLL_HOST_SERIAL      2	/* Host who booted me */
+#define POLL_MY_SERIAL        6	/* My serial number */
+#define POLL_YOUR_ID          1	/* Your ID number */
+#define POLL_TOPOLOGY_FIELDS  2	/* Topology maps */
 
 #endif
 
 /*********** end of file ***********/
-
-
-

drivers/char/rio/port.h

@@ -46,96 +46,94 @@ static char *_port_h_sccs_ = "@(#)port.h	1.3";
 */
 
 #ifdef STATS
-struct RIOStats
-{
+struct RIOStats {
 	/*
-	** interrupt statistics
-	*/
-	uint	BreakIntCnt;
-	uint	ModemOffCnt;
-	uint	ModemOnCnt;
-	uint	RxIntCnt;
-	uint	TxIntCnt;
+	 ** interrupt statistics
+	 */
+	uint BreakIntCnt;
+	uint ModemOffCnt;
+	uint ModemOnCnt;
+	uint RxIntCnt;
+	uint TxIntCnt;
 	/*
-	** throughput statistics
-	*/
-	uint	RxCharCnt;
-	uint	RxPktCnt;
-	uint	RxSaveCnt;
-	uint	TxCharCnt;
-	uint	TxPktCnt;
+	 ** throughput statistics
+	 */
+	uint RxCharCnt;
+	uint RxPktCnt;
+	uint RxSaveCnt;
+	uint TxCharCnt;
+	uint TxPktCnt;
 	/*
-	** driver entry statistics
-	*/
-	uint	CloseCnt;
-	uint	IoctlCnt;
-	uint	OpenCnt;
-	uint	ReadCnt;
-	uint	WriteCnt;
+	 ** driver entry statistics
+	 */
+	uint CloseCnt;
+	uint IoctlCnt;
+	uint OpenCnt;
+	uint ReadCnt;
+	uint WriteCnt;
 	/*
-	** proc statistics
-	*/
-	uint	BlockCnt;
-	uint	OutputCnt;
-	uint	ResumeCnt;
-	uint	RflushCnt;
-	uint	SuspendCnt;
-	uint	TbreakCnt;
-	uint	TimeoutCnt;
-	uint	UnblockCnt;
-	uint	WflushCnt;
-	uint	WFBodgeCnt;
+	 ** proc statistics
+	 */
+	uint BlockCnt;
+	uint OutputCnt;
+	uint ResumeCnt;
+	uint RflushCnt;
+	uint SuspendCnt;
+	uint TbreakCnt;
+	uint TimeoutCnt;
+	uint UnblockCnt;
+	uint WflushCnt;
+	uint WFBodgeCnt;
 };
 #endif
 
 /*
 **	Port data structure
 */
-struct	Port
-{
-  struct gs_port gs; 
-  int				PortNum;	/* RIO port no., 0-511 */
-  struct Host	*HostP;
-  volatile caddr_t		Caddr;
-  ushort			HostPort;  /* Port number on host card */
-  uchar			RupNum;	/* Number of RUP for port */
-  uchar			ID2;	/* Second ID of RTA for port */
-  ulong			State;	/* FLAGS for open & xopen */
-#define	RIO_LOPEN	0x00001		/* Local open */
-#define	RIO_MOPEN	0x00002		/* Modem open */
-#define	RIO_WOPEN	0x00004		/* Waiting for open */
-#define	RIO_CLOSING	0x00008		/* The port is being close */
-#define	RIO_XPBUSY	0x00010		/* Transparent printer busy */
-#define	RIO_BREAKING	0x00020		/* Break in progress */
-#define	RIO_DIRECT	0x00040		/* Doing Direct output */
-#define	RIO_EXCLUSIVE	0x00080		/* Stream open for exclusive use */
-#define	RIO_NDELAY	0x00100		/* Stream is open FNDELAY */
-#define	RIO_CARR_ON	0x00200		/* Stream has carrier present */
-#define	RIO_XPWANTR	0x00400		/* Stream wanted by Xprint */
-#define	RIO_RBLK	0x00800		/* Stream is read-blocked */
-#define	RIO_BUSY	0x01000		/* Stream is BUSY for write */
-#define	RIO_TIMEOUT	0x02000		/* Stream timeout in progress */
-#define	RIO_TXSTOP	0x04000		/* Stream output is stopped */
-#define	RIO_WAITFLUSH	0x08000		/* Stream waiting for flush */
-#define	RIO_DYNOROD	0x10000		/* Drain failed */
-#define	RIO_DELETED	0x20000		/* RTA has been deleted */
-#define RIO_ISSCANCODE	0x40000		/* This line is in scancode mode */
+struct Port {
+	struct gs_port gs;
+	int PortNum;		/* RIO port no., 0-511 */
+	struct Host *HostP;
+	volatile caddr_t Caddr;
+	ushort HostPort;	/* Port number on host card */
+	uchar RupNum;		/* Number of RUP for port */
+	uchar ID2;		/* Second ID of RTA for port */
+	ulong State;		/* FLAGS for open & xopen */
+#define	RIO_LOPEN	0x00001	/* Local open */
+#define	RIO_MOPEN	0x00002	/* Modem open */
+#define	RIO_WOPEN	0x00004	/* Waiting for open */
+#define	RIO_CLOSING	0x00008	/* The port is being close */
+#define	RIO_XPBUSY	0x00010	/* Transparent printer busy */
+#define	RIO_BREAKING	0x00020	/* Break in progress */
+#define	RIO_DIRECT	0x00040	/* Doing Direct output */
+#define	RIO_EXCLUSIVE	0x00080	/* Stream open for exclusive use */
+#define	RIO_NDELAY	0x00100	/* Stream is open FNDELAY */
+#define	RIO_CARR_ON	0x00200	/* Stream has carrier present */
+#define	RIO_XPWANTR	0x00400	/* Stream wanted by Xprint */
+#define	RIO_RBLK	0x00800	/* Stream is read-blocked */
+#define	RIO_BUSY	0x01000	/* Stream is BUSY for write */
+#define	RIO_TIMEOUT	0x02000	/* Stream timeout in progress */
+#define	RIO_TXSTOP	0x04000	/* Stream output is stopped */
+#define	RIO_WAITFLUSH	0x08000	/* Stream waiting for flush */
+#define	RIO_DYNOROD	0x10000	/* Drain failed */
+#define	RIO_DELETED	0x20000	/* RTA has been deleted */
+#define RIO_ISSCANCODE	0x40000	/* This line is in scancode mode */
 #define	RIO_USING_EUC	0x100000	/* Using extended Unix chars */
 #define	RIO_CAN_COOK	0x200000	/* This line can do cooking */
-#define RIO_TRIAD_MODE  0x400000        /* Enable TRIAD special ops. */
-#define RIO_TRIAD_BLOCK 0x800000        /* Next read will block */
-#define RIO_TRIAD_FUNC  0x1000000       /* Seen a function key coming in */
-#define RIO_THROTTLE_RX 0x2000000       /* RX needs to be throttled. */
+#define RIO_TRIAD_MODE  0x400000	/* Enable TRIAD special ops. */
+#define RIO_TRIAD_BLOCK 0x800000	/* Next read will block */
+#define RIO_TRIAD_FUNC  0x1000000	/* Seen a function key coming in */
+#define RIO_THROTTLE_RX 0x2000000	/* RX needs to be throttled. */
 
-    ulong			Config;	/* FLAGS for NOREAD.... */
-#define	RIO_NOREAD	0x0001		/* Are not allowed to read port */
-#define	RIO_NOWRITE	0x0002		/* Are not allowed to write port */
-#define	RIO_NOXPRINT	0x0004		/* Are not allowed to xprint port */
-#define	RIO_NOMASK	0x0007		/* All not allowed things */
-#define RIO_IXANY	0x0008          /* Port is allowed ixany */
-#define	RIO_MODEM	0x0010		/* Stream is a modem device */
-#define	RIO_IXON	0x0020		/* Port is allowed ixon */
-#define RIO_WAITDRAIN	0x0040		/* Wait for port to completely drain */
+	ulong Config;		/* FLAGS for NOREAD.... */
+#define	RIO_NOREAD	0x0001	/* Are not allowed to read port */
+#define	RIO_NOWRITE	0x0002	/* Are not allowed to write port */
+#define	RIO_NOXPRINT	0x0004	/* Are not allowed to xprint port */
+#define	RIO_NOMASK	0x0007	/* All not allowed things */
+#define RIO_IXANY	0x0008	/* Port is allowed ixany */
+#define	RIO_MODEM	0x0010	/* Stream is a modem device */
+#define	RIO_IXON	0x0020	/* Port is allowed ixon */
+#define RIO_WAITDRAIN	0x0040	/* Wait for port to completely drain */
 #define RIO_MAP_50_TO_50	0x0080	/* Map 50 baud to 50 baud */
 #define RIO_MAP_110_TO_110	0x0100	/* Map 110 baud to 110 baud */
 
@@ -144,92 +142,90 @@ struct	Port
 ** As LynxOS does not appear to support Hardware Flow Control .....
 ** Define our own flow control flags in 'Config'.
 */
-#define RIO_CTSFLOW	0x0200		/* RIO's own CTSFLOW flag */
-#define RIO_RTSFLOW	0x0400		/* RIO's own RTSFLOW flag */
+#define RIO_CTSFLOW	0x0200	/* RIO's own CTSFLOW flag */
+#define RIO_RTSFLOW	0x0400	/* RIO's own RTSFLOW flag */
 
 
-    struct PHB			*PhbP;	  /* pointer to PHB for port */
-    WORD                        *TxAdd;   /* Add packets here */
-    WORD                        *TxStart; /* Start of add array */
-    WORD                        *TxEnd;         /* End of add array */
-    WORD                        *RxRemove;      /* Remove packets here */
-    WORD                        *RxStart;       /* Start of remove array */
-    WORD                        *RxEnd;         /* End of remove array */
-    uint			RtaUniqueNum;	/* Unique number of RTA */
-    ushort			PortState;	/* status of port */
-    ushort			ModemState;	/* status of modem lines */
-    ulong			ModemLines;	/* Modem bits sent to RTA */
-    uchar			CookMode;	/* who expands CR/LF? */
-    uchar			ParamSem;	/* Prevent write during param */
-    uchar			Mapped;		/* if port mapped onto host */
-    uchar			SecondBlock;	/* if port belongs to 2nd block
-						   of 16 port RTA */
-    uchar			InUse;		/* how many pre-emptive cmds */
-    uchar			Lock;		/* if params locked */
-    uchar			Store;	/* if params stored across closes */
-    uchar			FirstOpen; /* TRUE if first time port opened */
-    uchar			FlushCmdBodge;	/* if doing a (non)flush */
-    uchar			MagicFlags;	/* require intr processing */
+	struct PHB *PhbP;	/* pointer to PHB for port */
+	WORD *TxAdd;		/* Add packets here */
+	WORD *TxStart;		/* Start of add array */
+	WORD *TxEnd;		/* End of add array */
+	WORD *RxRemove;		/* Remove packets here */
+	WORD *RxStart;		/* Start of remove array */
+	WORD *RxEnd;		/* End of remove array */
+	uint RtaUniqueNum;	/* Unique number of RTA */
+	ushort PortState;	/* status of port */
+	ushort ModemState;	/* status of modem lines */
+	ulong ModemLines;	/* Modem bits sent to RTA */
+	uchar CookMode;		/* who expands CR/LF? */
+	uchar ParamSem;		/* Prevent write during param */
+	uchar Mapped;		/* if port mapped onto host */
+	uchar SecondBlock;	/* if port belongs to 2nd block
+				   of 16 port RTA */
+	uchar InUse;		/* how many pre-emptive cmds */
+	uchar Lock;		/* if params locked */
+	uchar Store;		/* if params stored across closes */
+	uchar FirstOpen;	/* TRUE if first time port opened */
+	uchar FlushCmdBodge;	/* if doing a (non)flush */
+	uchar MagicFlags;	/* require intr processing */
 #define	MAGIC_FLUSH	0x01	/* mirror of WflushFlag */
 #define	MAGIC_REBOOT	0x02	/* RTA re-booted, re-open ports */
 #define	MORE_OUTPUT_EYGOR 0x04	/* riotproc failed to empty clists */
-    uchar			WflushFlag;	/* 1 How many WFLUSHs active */
+	uchar WflushFlag;	/* 1 How many WFLUSHs active */
 /*
 ** Transparent print stuff
 */
-    struct Xprint
-    {
+	struct Xprint {
 #ifndef MAX_XP_CTRL_LEN
-#define MAX_XP_CTRL_LEN		16		/* ALSO IN DAEMON.H */
+#define MAX_XP_CTRL_LEN		16	/* ALSO IN DAEMON.H */
 #endif
-	uint			XpCps;
-	char			XpOn[MAX_XP_CTRL_LEN];
-	char			XpOff[MAX_XP_CTRL_LEN];
-	ushort			XpLen;		/* strlen(XpOn)+strlen(XpOff) */
-	uchar			XpActive;
-	uchar			XpLastTickOk;	/* TRUE if we can process */
+		uint XpCps;
+		char XpOn[MAX_XP_CTRL_LEN];
+		char XpOff[MAX_XP_CTRL_LEN];
+		ushort XpLen;	/* strlen(XpOn)+strlen(XpOff) */
+		uchar XpActive;
+		uchar XpLastTickOk;	/* TRUE if we can process */
 #define	XP_OPEN		00001
 #define	XP_RUNABLE	00002
-	struct ttystatics 		*XttyP;
-    } Xprint;
+		struct ttystatics *XttyP;
+	} Xprint;
 #ifdef VPIX
-    v86_t			*StashP;
-    uint			IntMask;
-    struct termss 		VpixSs;
-    uchar			ModemStatusReg;	/* Modem status register */
+	v86_t *StashP;
+	uint IntMask;
+	struct termss VpixSs;
+	uchar ModemStatusReg;	/* Modem status register */
 #endif
-    uchar			RxDataStart;
-    uchar			Cor2Copy;	/* copy of COR2 */
-    char			*Name;		/* points to the Rta's name */
+	uchar RxDataStart;
+	uchar Cor2Copy;		/* copy of COR2 */
+	char *Name;		/* points to the Rta's name */
 #ifdef STATS
-    struct RIOStats 		Stat;		/* ports statistics */
+	struct RIOStats Stat;	/* ports statistics */
 #endif
-    char			*TxRingBuffer;
-    ushort			TxBufferIn;	/* New data arrives here */
-    ushort			TxBufferOut;	/* Intr removes data here */
-    ushort			OldTxBufferOut;	/* Indicates if draining */
-    int				TimeoutId;	/* Timeout ID */
-    uint			Debug;
-    uchar			WaitUntilBooted; /* True if open should block */
-    uint			statsGather;	/* True if gathering stats */
-    ulong			txchars;	/* Chars transmitted */
-    ulong			rxchars;	/* Chars received */
-    ulong			opens;		/* port open count */
-    ulong			closes;		/* port close count */
-    ulong			ioctls;		/* ioctl count */
-    uchar			LastRxTgl;	/* Last state of rx toggle bit */
-  spinlock_t				portSem;	/* Lock using this sem */
-	int				MonitorTstate;	/* Monitoring ? */
-	int				timeout_id;	/* For calling 100 ms delays */
-	int				timeout_sem;/* For calling 100 ms delays */
-	int				firstOpen;	/* First time open ? */
-	char *			p;			/* save the global struc here .. */
+	char *TxRingBuffer;
+	ushort TxBufferIn;	/* New data arrives here */
+	ushort TxBufferOut;	/* Intr removes data here */
+	ushort OldTxBufferOut;	/* Indicates if draining */
+	int TimeoutId;		/* Timeout ID */
+	uint Debug;
+	uchar WaitUntilBooted;	/* True if open should block */
+	uint statsGather;	/* True if gathering stats */
+	ulong txchars;		/* Chars transmitted */
+	ulong rxchars;		/* Chars received */
+	ulong opens;		/* port open count */
+	ulong closes;		/* port close count */
+	ulong ioctls;		/* ioctl count */
+	uchar LastRxTgl;	/* Last state of rx toggle bit */
+	spinlock_t portSem;	/* Lock using this sem */
+	int MonitorTstate;	/* Monitoring ? */
+	int timeout_id;		/* For calling 100 ms delays */
+	int timeout_sem;	/* For calling 100 ms delays */
+	int firstOpen;		/* First time open ? */
+	char *p;		/* save the global struc here .. */
 };
 
-struct ModuleInfo
-{
-	char	*Name;
-	uint	Flags[4];	/* one per port on a module */
+struct ModuleInfo {
+	char *Name;
+	uint Flags[4];		/* one per port on a module */
 };
 #endif
 
@@ -238,8 +234,8 @@ struct ModuleInfo
 ** runs into problems with differing struct sizes between driver and config.
 */
 struct PortParams {
-	uint	Port;
-	ulong	Config;
-	ulong	State;
-	struct ttystatics	*TtyP;
+	uint Port;
+	ulong Config;
+	ulong State;
+	struct ttystatics *TtyP;
 };

drivers/char/rio/proto.h

@@ -23,15 +23,15 @@
 /*
 ** boot.c
 */
-void init_boot( char *p, short stage);
+void init_boot(char *p, short stage);
 
 /*
 ** disconct.c
 */
-void kill_boot ( LPB *link );
-void disconnected( LPB *link );
-short boot_3( LPB *link, PKT *pkt );
-short send_3_pkt( LPB *link, PKT *pkt);
+void kill_boot(LPB * link);
+void disconnected(LPB * link);
+short boot_3(LPB * link, PKT * pkt);
+short send_3_pkt(LPB * link, PKT * pkt);
 
 /*
 ** error.c
@@ -41,116 +41,116 @@ void du_error(void);
 /*
 ** formpkt.c
 */
-ushort sum_it( PKT *pkt ) ;
-void form_rup_pkt( RUP *form_rup, PKT *pkt );
-void form_poll_pkt ( int type, LPB *link, int node );
-void form_route_pkt ( int type, PKT *pkt, LPB *link );
+ushort sum_it(PKT * pkt);
+void form_rup_pkt(RUP * form_rup, PKT * pkt);
+void form_poll_pkt(int type, LPB * link, int node);
+void form_route_pkt(int type, PKT * pkt, LPB * link);
 
 /*
 ** idle.c
 */
-void idle( Process *idle_p );
+void idle(Process * idle_p);
 
 /*
 ** init.c
 */
 void general_init(void);
-void mem_halt( int error);
+void mem_halt(int error);
 
 /*
 ** linkinit.c
 */
-void initlink( u_short number, LPB *link);
-void runlink( LPB *link);
+void initlink(u_short number, LPB * link);
+void runlink(LPB * link);
 
 /*
 ** list.c
 */
 PKT *get_free_start(void);
-void put_free_start( PKT *pkt);
+void put_free_start(PKT * pkt);
 
 #ifdef HOST
-int can_remove_transmit ( PKT **pkt, PKT *pointer );
+int can_remove_transmit(PKT ** pkt, PKT * pointer);
 #endif
 
 #ifdef RTA
-int spl7 ( void );
-int spl0 ( void );
-Q_BUF *get_free_q( void );
+int spl7(void);
+int spl0(void);
+Q_BUF *get_free_q(void);
 PKT *get_free_end(void);
-int add_end( PKT *pkt, PHB *phb, int type);
-unsigned short free_packets( PHB *phb, int type);
-int can_remove_start( PKT **pkt, PHB *phb, int type);
-int can_add_start( PHB *phb, int type);
-int can_add_end( PHB *phb, int type);
-void put_free_end( PKT *pkt);
-int remove_start( PKT **pkt, PHB *phb, int type);
+int add_end(PKT * pkt, PHB * phb, int type);
+unsigned short free_packets(PHB * phb, int type);
+int can_remove_start(PKT ** pkt, PHB * phb, int type);
+int can_add_start(PHB * phb, int type);
+int can_add_end(PHB * phb, int type);
+void put_free_end(PKT * pkt);
+int remove_start(PKT ** pkt, PHB * phb, int type);
 #endif
 
 /*
 ** Lrt.c
 */
-void lrt( Process *lrt_p, LPB *link );
+void lrt(Process * lrt_p, LPB * link);
 
 #ifdef RTA
-void set_led_red ( LPB *link );
+void set_led_red(LPB * link);
 #endif
 
 /*
 ** ltt.c
 */
-void ltt( Process *ltt_p, LPB *link, PHB *phb_ptr[] );
-void send_poll ( LPB *link );
-void request_id ( LPB *link );
-void send_topology_update ( LPB *link );
-void send_topology ( LPB *link );
-void supply_id ( LPB *link );
+void ltt(Process * ltt_p, LPB * link, PHB * phb_ptr[]);
+void send_poll(LPB * link);
+void request_id(LPB * link);
+void send_topology_update(LPB * link);
+void send_topology(LPB * link);
+void supply_id(LPB * link);
 
 #ifdef RTA
-void redirect_queue ( LPB *link, ushort flush );
-int obtain_rup ( int rup_number, PKT **pkt_address, LPB *link );
+void redirect_queue(LPB * link, ushort flush);
+int obtain_rup(int rup_number, PKT ** pkt_address, LPB * link);
 #endif
 
 #ifdef TESTING_PERF
-int consume_cpu( void );
+int consume_cpu(void);
 #endif
 
 /*
 ** lttwake.c
 */
 #ifdef HOST
-void ltt_wakeup( Process *ltt_wakeup_p );
+void ltt_wakeup(Process * ltt_wakeup_p);
 #endif
 
 /*
 ** mapgen.c
 */
-void generate_id_map( short mapping, ROUTE_STR route[] );
-void gen_map( int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl );
-void adjust_ttl( int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl);
+void generate_id_map(short mapping, ROUTE_STR route[]);
+void gen_map(int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl);
+void adjust_ttl(int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl);
 void init_sys_map(void);
 
 /*
 ** mmu.c
 */
-char *rio_malloc( unsigned int amount);
-char *rio_calloc( unsigned int num, unsigned int size);
-ERROR rio_mmu_init( uint total_mem );
+char *rio_malloc(unsigned int amount);
+char *rio_calloc(unsigned int num, unsigned int size);
+ERROR rio_mmu_init(uint total_mem);
 
 /*
 ** partn.c
 */
-void partition_tx( struct PHB *phb, u_short tx_size, u_short rx_size, u_short rx_limit);
+void partition_tx(struct PHB *phb, u_short tx_size, u_short rx_size, u_short rx_limit);
 
 /*
 ** poll.c
 */
-void tx_poll( Process *tx_poll_p);
+void tx_poll(Process * tx_poll_p);
 
 /*
 ** process.c
 */
-int  get_proc_space( Process **pd, int **pws, int wssize);
+int get_proc_space(Process ** pd, int **pws, int wssize);
 
 /*
 ** readrom.c
@@ -160,85 +160,85 @@ void read_serial_number(char *buf);
 /*
 ** rio.c
 */
-int main( void );
+int main(void);
 
 /*
 ** route.c
 */
-void route_update ( PKT *pkt, LPB *link);
+void route_update(PKT * pkt, LPB * link);
 
 /*
 ** rtainit.c
 */
 #if defined(RTA)
 void rta_init(ushort RtaType);
-#endif /* defined(RTA) */
+#endif				/* defined(RTA) */
 
 /*
 ** rupboot.c
 */
-void rup_boot( PKT *pkt, RUP *this_rup, LPB *link);
+void rup_boot(PKT * pkt, RUP * this_rup, LPB * link);
 
 #ifdef RTA
-void kill_your_neighbour( int link_to_kill );
+void kill_your_neighbour(int link_to_kill);
 #endif
 
 /*
 ** rupcmd.c
 */
-void rup_command( PKT *pkt, struct RUP *this_rup, LPB *link);
+void rup_command(PKT * pkt, struct RUP *this_rup, LPB * link);
 
 /*
 ** ruperr.c
 */
-void rup_error( PKT *pkt, RUP *this_rup, LPB *link );
-void illegal_cmd( PKT *src_pkt );
+void rup_error(PKT * pkt, RUP * this_rup, LPB * link);
+void illegal_cmd(PKT * src_pkt);
 
 /*
 ** ruppoll.c
 */
-void rup_poll( PKT *pkt, RUP *this_rup, LPB *link );
+void rup_poll(PKT * pkt, RUP * this_rup, LPB * link);
 
 /*
 ** ruppower.c
 */
-void rup_power( PKT *pkt, RUP *this_rup, LPB *link );
+void rup_power(PKT * pkt, RUP * this_rup, LPB * link);
 
 /*
 ** ruprm.c
 */
-void rup_route_map( PKT *pkt, RUP *this_rup, LPB *link);
+void rup_route_map(PKT * pkt, RUP * this_rup, LPB * link);
 
 /*
 ** rupstat.c
 */
-void rup_status( PKT *pkt, RUP *this_rup, LPB *link);
+void rup_status(PKT * pkt, RUP * this_rup, LPB * link);
 
 /*
 ** rupsync.c
 */
-void rup_sync( PKT *pkt);
+void rup_sync(PKT * pkt);
 
 /*
 ** rxpkt.c
 */
-ERROR  rx_pkt( PKT_ptr_ptr pkt_address, LPB *link);
+ERROR rx_pkt(PKT_ptr_ptr pkt_address, LPB * link);
 
 /*
 ** sendsts.c
 */
-void send_status( PKT *requesting_pkt, RUP *this_rup);
+void send_status(PKT * requesting_pkt, RUP * this_rup);
 
 /*
 ** serial.c
 */
-void assign_serial ( char *ser_in, char *ser_out);
-int cmp_serial ( char *ser_1, char *ser_2);
+void assign_serial(char *ser_in, char *ser_out);
+int cmp_serial(char *ser_1, char *ser_2);
 
 /*
 ** txpkt.c
 */
-ERROR  tx_pkt( PKT *pkt, LPB *link);
-short send_sync( LPB *link);
+ERROR tx_pkt(PKT * pkt, LPB * link);
+short send_sync(LPB * link);
 
-#endif	/* _prototypes_h */
+#endif				/* _prototypes_h */

drivers/char/rio/protsts.h

@@ -115,5 +115,3 @@
 #endif
 
 /*********** end of file ***********/
-
-

drivers/char/rio/qbuf.h

@@ -40,7 +40,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_qbuf_h_sccs = "@(#)qbuf.h	1.1" ;
+static char *_rio_qbuf_h_sccs = "@(#)qbuf.h	1.1";
 #endif
 #endif
 
@@ -52,16 +52,15 @@ static char *_rio_qbuf_h_sccs = "@(#)qbuf.h	1.1" ;
 #define PKTS_PER_BUFFER    (220 / PKT_LENGTH)
 #endif
 
-typedef struct Q_BUF Q_BUF ;
-struct Q_BUF  {
-                  Q_BUF_ptr next ;
-                  Q_BUF_ptr prev ;
-                  PKT_ptr buf[PKTS_PER_BUFFER] ;
-              } ;
+typedef struct Q_BUF Q_BUF;
+struct Q_BUF {
+	Q_BUF_ptr next;
+	Q_BUF_ptr prev;
+	PKT_ptr buf[PKTS_PER_BUFFER];
+};
 
 
 #endif
 
 
 /*********** end of file ***********/
-

drivers/char/rio/rio.h

@@ -72,8 +72,8 @@ static char *_rio_h_sccs_ = "@(#)rio.h	1.3";
 #define	RIO_HOSTS	4	/* number of hosts that can be found */
 #define	PORTS_PER_HOST	128	/* number of ports per host */
 #define	LINKS_PER_UNIT	4	/* number of links from a host */
-#define	RIO_PORTS	(PORTS_PER_HOST * RIO_HOSTS) /* max. no. of ports */
-#define	RTAS_PER_HOST	(MAX_RUP) /* number of RTAs per host */
+#define	RIO_PORTS	(PORTS_PER_HOST * RIO_HOSTS)	/* max. no. of ports */
+#define	RTAS_PER_HOST	(MAX_RUP)	/* number of RTAs per host */
 #define	PORTS_PER_RTA	(PORTS_PER_HOST/RTAS_PER_HOST)	/* ports on a rta */
 #define	PORTS_PER_MODULE 4	/* number of ports on a plug-in module */
 				/* number of modules on an RTA */
@@ -216,10 +216,9 @@ static char *_rio_h_sccs_ = "@(#)rio.h	1.3";
 #define	RIO_PRI	(PZERO+10)
 #define RIO_CLOSE_PRI	PZERO-1	/* uninterruptible sleeps for close */
 
-typedef struct DbInf
-{
-	uint	Flag;
-	char	Name[8];
+typedef struct DbInf {
+	uint Flag;
+	char Name[8];
 } DbInf;
 
 #ifndef TRUE
@@ -251,7 +250,7 @@ typedef struct DbInf
 	*((uint *)PK)    = PP->PacketInfo; \
 }
 
-#define	RIO_LINK_ENABLE	0x80FF /* FF is a hack, mainly for Mips, to        */
+#define	RIO_LINK_ENABLE	0x80FF	/* FF is a hack, mainly for Mips, to        */
 			       /* prevent a really stupid race condition.  */
 
 #define	NOT_INITIALISED	0
@@ -291,4 +290,4 @@ typedef struct DbInf
 #define DIST_LINESW_OUTPUT	0x40
 #define DIST_LINESW_MDMINT	0x80
 
-#endif /* __rio_h__ */
+#endif				/* __rio_h__ */

drivers/char/rio/rio_linux.h

@@ -37,15 +37,15 @@
 
 
 struct vpd_prom {
-  unsigned short id;
-  char hwrev;
-  char hwass;
-  int uniqid;
-  char myear;
-  char mweek;
-  char hw_feature[5];
-  char oem_id;
-  char identifier[16];
+	unsigned short id;
+	char hwrev;
+	char hwass;
+	int uniqid;
+	char myear;
+	char mweek;
+	char hw_feature[5];
+	char oem_id;
+	char identifier[16];
 };
 
 
@@ -75,13 +75,13 @@ struct vpd_prom {
       (L_ISIG(tty)))
 
 
-#endif /* __KERNEL__ */
+#endif				/* __KERNEL__ */
 
 
 #define RIO_BOARD_INTR_LOCK  1
 
 
-#ifndef RIOCTL_MISC_MINOR 
+#ifndef RIOCTL_MISC_MINOR
 /* Allow others to gather this into "major.h" or something like that */
 #define RIOCTL_MISC_MINOR    169
 #endif
@@ -121,39 +121,39 @@ struct vpd_prom {
             spin_unlock_irqrestore(sem, flags)
 
 #define rio_spin_lock(sem) \
-            spin_lock(sem) 
+            spin_lock(sem)
 
 #define rio_spin_unlock(sem) \
-            spin_unlock(sem) 
+            spin_unlock(sem)
 
 #endif
 
 
 
 #ifdef CONFIG_RIO_OLDPCI
-static inline void *rio_memcpy_toio (void *dummy, void *dest, void *source, int n)
+static inline void *rio_memcpy_toio(void *dummy, void *dest, void *source, int n)
 {
-  char *dst = dest;
-  char *src = source;
+	char *dst = dest;
+	char *src = source;
 
-  while (n--) {
-    writeb (*src++, dst++);
-    (void) readb (dummy);
-  }
+	while (n--) {
+		writeb(*src++, dst++);
+		(void) readb(dummy);
+	}
 
-  return dest;
+	return dest;
 }
 
 
-static inline void *rio_memcpy_fromio (void *dest, void *source, int n)
+static inline void *rio_memcpy_fromio(void *dest, void *source, int n)
 {
-  char *dst = dest;
-  char *src = source;
+	char *dst = dest;
+	char *src = source;
 
-  while (n--) 
-    *dst++ = readb (src++);
+	while (n--)
+		*dst++ = readb(src++);
 
-  return dest;
+	return dest;
 }
 
 #else
@@ -179,9 +179,8 @@ static inline void *rio_memcpy_fromio (void *dest, void *source, int n)
 #define func_exit()  rio_dprintk (RIO_DEBUG_FLOW, "rio: exit  %s\n", __FUNCTION__)
 #define func_enter2() rio_dprintk (RIO_DEBUG_FLOW, "rio: enter %s (port %d)\n",__FUNCTION__, port->line)
 #else
-#define rio_dprintk(f, str...) /* nothing */
+#define rio_dprintk(f, str...)	/* nothing */
 #define func_enter()
 #define func_exit()
 #define func_enter2()
 #endif
-

drivers/char/rio/rioboard.h

@@ -35,7 +35,7 @@
 
 */
 
-#ifndef	_rioboard_h				/* If RIOBOARD.H not already defined */
+#ifndef	_rioboard_h		/* If RIOBOARD.H not already defined */
 #define	_rioboard_h    1
 
 /*****************************************************************************
@@ -46,7 +46,7 @@
 
 /* Hardware Registers... */
 
-#define	RIO_REG_BASE	0x7C00			/* Base of control registers */
+#define	RIO_REG_BASE	0x7C00	/* Base of control registers */
 
 #define	RIO_CONFIG	RIO_REG_BASE + 0x0000	/* WRITE: Configuration Register */
 #define	RIO_INTSET	RIO_REG_BASE + 0x0080	/* WRITE: Interrupt Set */
@@ -58,30 +58,30 @@
 #define	RIO_RESETSTAT	RIO_REG_BASE + 0x0100	/* READ: Reset Status (Jet boards only) */
 
 /* RIO_VPD_ROM definitions... */
-#define	VPD_SLX_ID1	0x00			/* READ: Specialix Identifier #1 */
-#define	VPD_SLX_ID2	0x01			/* READ: Specialix Identifier #2 */
-#define	VPD_HW_REV	0x02			/* READ: Hardware Revision */
-#define	VPD_HW_ASSEM	0x03			/* READ: Hardware Assembly Level */
-#define	VPD_UNIQUEID4	0x04			/* READ: Unique Identifier #4 */
-#define	VPD_UNIQUEID3	0x05			/* READ: Unique Identifier #3 */
-#define	VPD_UNIQUEID2	0x06			/* READ: Unique Identifier #2 */
-#define	VPD_UNIQUEID1	0x07			/* READ: Unique Identifier #1 */
-#define	VPD_MANU_YEAR	0x08			/* READ: Year Of Manufacture (0 = 1970) */
-#define	VPD_MANU_WEEK	0x09			/* READ: Week Of Manufacture (0 = week 1 Jan) */
-#define	VPD_HWFEATURE1	0x0A			/* READ: Hardware Feature Byte 1 */
-#define	VPD_HWFEATURE2	0x0B			/* READ: Hardware Feature Byte 2 */
-#define	VPD_HWFEATURE3	0x0C			/* READ: Hardware Feature Byte 3 */
-#define	VPD_HWFEATURE4	0x0D			/* READ: Hardware Feature Byte 4 */
-#define	VPD_HWFEATURE5	0x0E			/* READ: Hardware Feature Byte 5 */
-#define	VPD_OEMID	0x0F			/* READ: OEM Identifier */
-#define	VPD_IDENT	0x10			/* READ: Identifier string (16 bytes) */
+#define	VPD_SLX_ID1	0x00	/* READ: Specialix Identifier #1 */
+#define	VPD_SLX_ID2	0x01	/* READ: Specialix Identifier #2 */
+#define	VPD_HW_REV	0x02	/* READ: Hardware Revision */
+#define	VPD_HW_ASSEM	0x03	/* READ: Hardware Assembly Level */
+#define	VPD_UNIQUEID4	0x04	/* READ: Unique Identifier #4 */
+#define	VPD_UNIQUEID3	0x05	/* READ: Unique Identifier #3 */
+#define	VPD_UNIQUEID2	0x06	/* READ: Unique Identifier #2 */
+#define	VPD_UNIQUEID1	0x07	/* READ: Unique Identifier #1 */
+#define	VPD_MANU_YEAR	0x08	/* READ: Year Of Manufacture (0 = 1970) */
+#define	VPD_MANU_WEEK	0x09	/* READ: Week Of Manufacture (0 = week 1 Jan) */
+#define	VPD_HWFEATURE1	0x0A	/* READ: Hardware Feature Byte 1 */
+#define	VPD_HWFEATURE2	0x0B	/* READ: Hardware Feature Byte 2 */
+#define	VPD_HWFEATURE3	0x0C	/* READ: Hardware Feature Byte 3 */
+#define	VPD_HWFEATURE4	0x0D	/* READ: Hardware Feature Byte 4 */
+#define	VPD_HWFEATURE5	0x0E	/* READ: Hardware Feature Byte 5 */
+#define	VPD_OEMID	0x0F	/* READ: OEM Identifier */
+#define	VPD_IDENT	0x10	/* READ: Identifier string (16 bytes) */
 #define	VPD_IDENT_LEN	0x10
 
 /* VPD ROM Definitions... */
 #define	SLX_ID1		0x4D
 #define	SLX_ID2		0x98
 
-#define	PRODUCT_ID(a)	((a>>4)&0xF)		/* Use to obtain Product ID from VPD_UNIQUEID1 */
+#define	PRODUCT_ID(a)	((a>>4)&0xF)	/* Use to obtain Product ID from VPD_UNIQUEID1 */
 
 #define	ID_SX_ISA	0x2
 #define	ID_RIO_EISA	0x3
@@ -101,7 +101,7 @@
 
 /* Firmware load position... */
 
-#define	FIRMWARELOADADDR	0x7C00		/* Firmware is loaded _before_ this address */
+#define	FIRMWARELOADADDR	0x7C00	/* Firmware is loaded _before_ this address */
 
 /*****************************************************************************
 *****************************                    *****************************
@@ -112,14 +112,14 @@
 /* Control Register Definitions... */
 #define	RIO_ISA_IDENT	"JBJGPGGHINSMJPJR"
 
-#define	RIO_ISA_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
-#define	RIO_ISA_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_ISA_CFG_IRQMASK	0x30		/* Interrupt mask */
-#define	  RIO_ISA_CFG_IRQ12	0x10		/* Interrupt Level 12 */
-#define	  RIO_ISA_CFG_IRQ11	0x20		/* Interrupt Level 11 */
-#define	  RIO_ISA_CFG_IRQ9	0x30		/* Interrupt Level 9 */
-#define	RIO_ISA_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
-#define	RIO_ISA_CFG_WAITSTATE0	0x80		/* 0 waitstates, else 1 */
+#define	RIO_ISA_CFG_BOOTRAM	0x01	/* Boot from RAM, else Link */
+#define	RIO_ISA_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_ISA_CFG_IRQMASK	0x30	/* Interrupt mask */
+#define	  RIO_ISA_CFG_IRQ12	0x10	/* Interrupt Level 12 */
+#define	  RIO_ISA_CFG_IRQ11	0x20	/* Interrupt Level 11 */
+#define	  RIO_ISA_CFG_IRQ9	0x30	/* Interrupt Level 9 */
+#define	RIO_ISA_CFG_LINK20	0x40	/* 20Mbps link, else 10Mbps */
+#define	RIO_ISA_CFG_WAITSTATE0	0x80	/* 0 waitstates, else 1 */
 
 /*****************************************************************************
 *****************************                    *****************************
@@ -130,17 +130,17 @@
 /* Control Register Definitions... */
 #define	RIO_ISA2_IDENT	"JBJGPGGHINSMJPJR"
 
-#define	RIO_ISA2_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
-#define	RIO_ISA2_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_ISA2_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
-#define	RIO_ISA2_CFG_16BIT	0x08		/* 16bit mode, else 8bit */
-#define	RIO_ISA2_CFG_IRQMASK	0x30		/* Interrupt mask */
-#define	  RIO_ISA2_CFG_IRQ15	0x00		/* Interrupt Level 15 */
-#define	  RIO_ISA2_CFG_IRQ12	0x10		/* Interrupt Level 12 */
-#define	  RIO_ISA2_CFG_IRQ11	0x20		/* Interrupt Level 11 */
-#define	  RIO_ISA2_CFG_IRQ9	0x30		/* Interrupt Level 9 */
-#define	RIO_ISA2_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
-#define	RIO_ISA2_CFG_WAITSTATE0	0x80		/* 0 waitstates, else 1 */
+#define	RIO_ISA2_CFG_BOOTRAM	0x01	/* Boot from RAM, else Link */
+#define	RIO_ISA2_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_ISA2_CFG_INTENABLE	0x04	/* Interrupt enable, else disable */
+#define	RIO_ISA2_CFG_16BIT	0x08	/* 16bit mode, else 8bit */
+#define	RIO_ISA2_CFG_IRQMASK	0x30	/* Interrupt mask */
+#define	  RIO_ISA2_CFG_IRQ15	0x00	/* Interrupt Level 15 */
+#define	  RIO_ISA2_CFG_IRQ12	0x10	/* Interrupt Level 12 */
+#define	  RIO_ISA2_CFG_IRQ11	0x20	/* Interrupt Level 11 */
+#define	  RIO_ISA2_CFG_IRQ9	0x30	/* Interrupt Level 9 */
+#define	RIO_ISA2_CFG_LINK20	0x40	/* 20Mbps link, else 10Mbps */
+#define	RIO_ISA2_CFG_WAITSTATE0	0x80	/* 0 waitstates, else 1 */
 
 /*****************************************************************************
 *****************************                   ******************************
@@ -151,14 +151,14 @@
 /* Control Register Definitions... */
 #define	RIO_ISA3_IDENT	"JET HOST BY KEV#"
 
-#define	RIO_ISA3_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_ISA3_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
-#define	RIO_ISA32_CFG_IRQMASK	0xF30		/* Interrupt mask */
-#define	  RIO_ISA3_CFG_IRQ15	0xF0		/* Interrupt Level 15 */
-#define	  RIO_ISA3_CFG_IRQ12	0xC0		/* Interrupt Level 12 */
-#define	  RIO_ISA3_CFG_IRQ11	0xB0		/* Interrupt Level 11 */
-#define	  RIO_ISA3_CFG_IRQ10	0xA0		/* Interrupt Level 10 */
-#define	  RIO_ISA3_CFG_IRQ9	0x90		/* Interrupt Level 9 */
+#define	RIO_ISA3_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_ISA3_CFG_INTENABLE	0x04	/* Interrupt enable, else disable */
+#define	RIO_ISA32_CFG_IRQMASK	0xF30	/* Interrupt mask */
+#define	  RIO_ISA3_CFG_IRQ15	0xF0	/* Interrupt Level 15 */
+#define	  RIO_ISA3_CFG_IRQ12	0xC0	/* Interrupt Level 12 */
+#define	  RIO_ISA3_CFG_IRQ11	0xB0	/* Interrupt Level 11 */
+#define	  RIO_ISA3_CFG_IRQ10	0xA0	/* Interrupt Level 10 */
+#define	  RIO_ISA3_CFG_IRQ9	0x90	/* Interrupt Level 9 */
 
 /*****************************************************************************
 *********************************             ********************************
@@ -169,9 +169,9 @@
 /* Control Register Definitions... */
 #define	RIO_MCA_IDENT	"JBJGPGGHINSMJPJR"
 
-#define	RIO_MCA_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
-#define	RIO_MCA_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_MCA_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
+#define	RIO_MCA_CFG_BOOTRAM	0x01	/* Boot from RAM, else Link */
+#define	RIO_MCA_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_MCA_CFG_LINK20	0x40	/* 20Mbps link, else 10Mbps */
 
 /*****************************************************************************
 ********************************              ********************************
@@ -185,35 +185,35 @@
 #define	EISA_PRODUCT_NUMBER	0xC82
 #define	EISA_REVISION_NUMBER	0xC83
 #define	EISA_CARD_ENABLE	0xC84
-#define	EISA_VPD_UNIQUEID4	0xC88		/* READ: Unique Identifier #4 */
-#define	EISA_VPD_UNIQUEID3	0xC8A		/* READ: Unique Identifier #3 */
-#define	EISA_VPD_UNIQUEID2	0xC90		/* READ: Unique Identifier #2 */
-#define	EISA_VPD_UNIQUEID1	0xC92		/* READ: Unique Identifier #1 */
-#define	EISA_VPD_MANU_YEAR	0xC98		/* READ: Year Of Manufacture (0 = 1970) */
-#define	EISA_VPD_MANU_WEEK	0xC9A		/* READ: Week Of Manufacture (0 = week 1 Jan) */
+#define	EISA_VPD_UNIQUEID4	0xC88	/* READ: Unique Identifier #4 */
+#define	EISA_VPD_UNIQUEID3	0xC8A	/* READ: Unique Identifier #3 */
+#define	EISA_VPD_UNIQUEID2	0xC90	/* READ: Unique Identifier #2 */
+#define	EISA_VPD_UNIQUEID1	0xC92	/* READ: Unique Identifier #1 */
+#define	EISA_VPD_MANU_YEAR	0xC98	/* READ: Year Of Manufacture (0 = 1970) */
+#define	EISA_VPD_MANU_WEEK	0xC9A	/* READ: Week Of Manufacture (0 = week 1 Jan) */
 #define	EISA_MEM_ADDR_23_16	0xC00
 #define	EISA_MEM_ADDR_31_24	0xC01
-#define	EISA_RIO_CONFIG		0xC02		/* WRITE: Configuration Register */
-#define	EISA_RIO_INTSET		0xC03		/* WRITE: Interrupt Set */
-#define	EISA_RIO_INTRESET	0xC03		/* READ:  Interrupt Reset */
+#define	EISA_RIO_CONFIG		0xC02	/* WRITE: Configuration Register */
+#define	EISA_RIO_INTSET		0xC03	/* WRITE: Interrupt Set */
+#define	EISA_RIO_INTRESET	0xC03	/* READ:  Interrupt Reset */
 
 /* Control Register Definitions... */
-#define	RIO_EISA_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
-#define	RIO_EISA_CFG_LINK20	0x02		/* 20Mbps link, else 10Mbps */
-#define	RIO_EISA_CFG_BUSENABLE	0x04		/* Enable processor bus */
-#define	RIO_EISA_CFG_PROCRUN	0x08		/* Processor running, else reset */
-#define	RIO_EISA_CFG_IRQMASK	0xF0		/* Interrupt mask */
-#define	  RIO_EISA_CFG_IRQ15	0xF0		/* Interrupt Level 15 */
-#define	  RIO_EISA_CFG_IRQ14	0xE0		/* Interrupt Level 14 */
-#define	  RIO_EISA_CFG_IRQ12	0xC0		/* Interrupt Level 12 */
-#define	  RIO_EISA_CFG_IRQ11	0xB0		/* Interrupt Level 11 */
-#define	  RIO_EISA_CFG_IRQ10	0xA0		/* Interrupt Level 10 */
-#define	  RIO_EISA_CFG_IRQ9	0x90		/* Interrupt Level 9 */
-#define	  RIO_EISA_CFG_IRQ7	0x70		/* Interrupt Level 7 */
-#define	  RIO_EISA_CFG_IRQ6	0x60		/* Interrupt Level 6 */
-#define	  RIO_EISA_CFG_IRQ5	0x50		/* Interrupt Level 5 */
-#define	  RIO_EISA_CFG_IRQ4	0x40		/* Interrupt Level 4 */
-#define	  RIO_EISA_CFG_IRQ3	0x30		/* Interrupt Level 3 */
+#define	RIO_EISA_CFG_BOOTRAM	0x01	/* Boot from RAM, else Link */
+#define	RIO_EISA_CFG_LINK20	0x02	/* 20Mbps link, else 10Mbps */
+#define	RIO_EISA_CFG_BUSENABLE	0x04	/* Enable processor bus */
+#define	RIO_EISA_CFG_PROCRUN	0x08	/* Processor running, else reset */
+#define	RIO_EISA_CFG_IRQMASK	0xF0	/* Interrupt mask */
+#define	  RIO_EISA_CFG_IRQ15	0xF0	/* Interrupt Level 15 */
+#define	  RIO_EISA_CFG_IRQ14	0xE0	/* Interrupt Level 14 */
+#define	  RIO_EISA_CFG_IRQ12	0xC0	/* Interrupt Level 12 */
+#define	  RIO_EISA_CFG_IRQ11	0xB0	/* Interrupt Level 11 */
+#define	  RIO_EISA_CFG_IRQ10	0xA0	/* Interrupt Level 10 */
+#define	  RIO_EISA_CFG_IRQ9	0x90	/* Interrupt Level 9 */
+#define	  RIO_EISA_CFG_IRQ7	0x70	/* Interrupt Level 7 */
+#define	  RIO_EISA_CFG_IRQ6	0x60	/* Interrupt Level 6 */
+#define	  RIO_EISA_CFG_IRQ5	0x50	/* Interrupt Level 5 */
+#define	  RIO_EISA_CFG_IRQ4	0x40	/* Interrupt Level 4 */
+#define	  RIO_EISA_CFG_IRQ3	0x30	/* Interrupt Level 3 */
 
 /*****************************************************************************
 ********************************              ********************************
@@ -224,20 +224,20 @@
 /* Control Register Definitions... */
 #define	RIO_SBUS_IDENT	"JBPGK#\0\0\0\0\0\0\0\0\0\0"
 
-#define	RIO_SBUS_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
-#define	RIO_SBUS_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_SBUS_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
-#define	RIO_SBUS_CFG_IRQMASK	0x38		/* Interrupt mask */
-#define	  RIO_SBUS_CFG_IRQNONE	0x00		/* No Interrupt */
-#define	  RIO_SBUS_CFG_IRQ7	0x38		/* Interrupt Level 7 */
-#define	  RIO_SBUS_CFG_IRQ6	0x30		/* Interrupt Level 6 */
-#define	  RIO_SBUS_CFG_IRQ5	0x28		/* Interrupt Level 5 */
-#define	  RIO_SBUS_CFG_IRQ4	0x20		/* Interrupt Level 4 */
-#define	  RIO_SBUS_CFG_IRQ3	0x18		/* Interrupt Level 3 */
-#define	  RIO_SBUS_CFG_IRQ2	0x10		/* Interrupt Level 2 */
-#define	  RIO_SBUS_CFG_IRQ1	0x08		/* Interrupt Level 1 */
-#define	RIO_SBUS_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
-#define	RIO_SBUS_CFG_PROC25	0x80		/* 25Mhz processor clock, else 20Mhz */
+#define	RIO_SBUS_CFG_BOOTRAM	0x01	/* Boot from RAM, else Link */
+#define	RIO_SBUS_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_SBUS_CFG_INTENABLE	0x04	/* Interrupt enable, else disable */
+#define	RIO_SBUS_CFG_IRQMASK	0x38	/* Interrupt mask */
+#define	  RIO_SBUS_CFG_IRQNONE	0x00	/* No Interrupt */
+#define	  RIO_SBUS_CFG_IRQ7	0x38	/* Interrupt Level 7 */
+#define	  RIO_SBUS_CFG_IRQ6	0x30	/* Interrupt Level 6 */
+#define	  RIO_SBUS_CFG_IRQ5	0x28	/* Interrupt Level 5 */
+#define	  RIO_SBUS_CFG_IRQ4	0x20	/* Interrupt Level 4 */
+#define	  RIO_SBUS_CFG_IRQ3	0x18	/* Interrupt Level 3 */
+#define	  RIO_SBUS_CFG_IRQ2	0x10	/* Interrupt Level 2 */
+#define	  RIO_SBUS_CFG_IRQ1	0x08	/* Interrupt Level 1 */
+#define	RIO_SBUS_CFG_LINK20	0x40	/* 20Mbps link, else 10Mbps */
+#define	RIO_SBUS_CFG_PROC25	0x80	/* 25Mhz processor clock, else 20Mhz */
 
 /*****************************************************************************
 *********************************             ********************************
@@ -248,18 +248,18 @@
 /* Control Register Definitions... */
 #define	RIO_PCI_IDENT	"ECDDPGJGJHJRGSK#"
 
-#define	RIO_PCI_CFG_BOOTRAM	0x01		/* Boot from RAM, else Link */
-#define	RIO_PCI_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_PCI_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
-#define	RIO_PCI_CFG_LINK20	0x40		/* 20Mbps link, else 10Mbps */
-#define	RIO_PCI_CFG_PROC25	0x80		/* 25Mhz processor clock, else 20Mhz */
+#define	RIO_PCI_CFG_BOOTRAM	0x01	/* Boot from RAM, else Link */
+#define	RIO_PCI_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_PCI_CFG_INTENABLE	0x04	/* Interrupt enable, else disable */
+#define	RIO_PCI_CFG_LINK20	0x40	/* 20Mbps link, else 10Mbps */
+#define	RIO_PCI_CFG_PROC25	0x80	/* 25Mhz processor clock, else 20Mhz */
 
 /* PCI Definitions... */
-#define	SPX_VENDOR_ID		0x11CB		/* Assigned by the PCI SIG */
-#define	SPX_DEVICE_ID		0x8000		/* RIO bridge boards */
-#define	SPX_PLXDEVICE_ID	0x2000		/* PLX bridge boards */
+#define	SPX_VENDOR_ID		0x11CB	/* Assigned by the PCI SIG */
+#define	SPX_DEVICE_ID		0x8000	/* RIO bridge boards */
+#define	SPX_PLXDEVICE_ID	0x2000	/* PLX bridge boards */
 #define	SPX_SUB_VENDOR_ID	SPX_VENDOR_ID	/* Same as vendor id */
-#define	RIO_SUB_SYS_ID		0x0800		/* RIO PCI board */
+#define	RIO_SUB_SYS_ID		0x0800	/* RIO PCI board */
 
 /*****************************************************************************
 *****************************                   ******************************
@@ -270,11 +270,11 @@
 /* Control Register Definitions... */
 #define	RIO_PCI2_IDENT	"JET HOST BY KEV#"
 
-#define	RIO_PCI2_CFG_BUSENABLE	0x02		/* Enable processor bus */
-#define	RIO_PCI2_CFG_INTENABLE	0x04		/* Interrupt enable, else disable */
+#define	RIO_PCI2_CFG_BUSENABLE	0x02	/* Enable processor bus */
+#define	RIO_PCI2_CFG_INTENABLE	0x04	/* Interrupt enable, else disable */
 
 /* PCI Definitions... */
-#define	RIO2_SUB_SYS_ID		0x0100		/* RIO (Jet) PCI board */
+#define	RIO2_SUB_SYS_ID		0x0100	/* RIO (Jet) PCI board */
 
 #endif						/*_rioboard_h */
 

drivers/char/rio/riocmd.c

@@ -83,102 +83,98 @@ static char *_riocmd_c_sccs_ = "@(#)riocmd.c	1.2";
 static struct IdentifyRta IdRta;
 static struct KillNeighbour KillUnit;
 
-int
-RIOFoadRta(struct Host *HostP, struct Map *MapP)
+int RIOFoadRta(struct Host *HostP, struct Map *MapP)
 {
 	struct CmdBlk *CmdBlkP;
 
-	rio_dprintk (RIO_DEBUG_CMD, "FOAD RTA\n");
+	rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA\n");
 
 	CmdBlkP = RIOGetCmdBlk();
 
-	if ( !CmdBlkP ) {
-		rio_dprintk (RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n");
+	if (!CmdBlkP) {
+		rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: GetCmdBlk failed\n");
 		return -ENXIO;
 	}
 
 	CmdBlkP->Packet.dest_unit = MapP->ID;
 	CmdBlkP->Packet.dest_port = BOOT_RUP;
-	CmdBlkP->Packet.src_unit  = 0;
-	CmdBlkP->Packet.src_port  = BOOT_RUP;
-	CmdBlkP->Packet.len	   = 0x84;
-	CmdBlkP->Packet.data[0]   = IFOAD;
-	CmdBlkP->Packet.data[1]   = 0;
-	CmdBlkP->Packet.data[2]   = IFOAD_MAGIC & 0xFF;
-	CmdBlkP->Packet.data[3]   = (IFOAD_MAGIC >> 8) & 0xFF;
-
-	if ( RIOQueueCmdBlk( HostP, MapP->ID-1, CmdBlkP) == RIO_FAIL ) {
-		rio_dprintk (RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n");
+	CmdBlkP->Packet.src_unit = 0;
+	CmdBlkP->Packet.src_port = BOOT_RUP;
+	CmdBlkP->Packet.len = 0x84;
+	CmdBlkP->Packet.data[0] = IFOAD;
+	CmdBlkP->Packet.data[1] = 0;
+	CmdBlkP->Packet.data[2] = IFOAD_MAGIC & 0xFF;
+	CmdBlkP->Packet.data[3] = (IFOAD_MAGIC >> 8) & 0xFF;
+
+	if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
+		rio_dprintk(RIO_DEBUG_CMD, "FOAD RTA: Failed to queue foad command\n");
 		return -EIO;
 	}
 	return 0;
 }
 
-int
-RIOZombieRta(struct Host *HostP, struct Map *MapP)
+int RIOZombieRta(struct Host *HostP, struct Map *MapP)
 {
 	struct CmdBlk *CmdBlkP;
 
-	rio_dprintk (RIO_DEBUG_CMD, "ZOMBIE RTA\n");
+	rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA\n");
 
 	CmdBlkP = RIOGetCmdBlk();
 
-	if ( !CmdBlkP ) {
-		rio_dprintk (RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n");
+	if (!CmdBlkP) {
+		rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: GetCmdBlk failed\n");
 		return -ENXIO;
 	}
 
 	CmdBlkP->Packet.dest_unit = MapP->ID;
 	CmdBlkP->Packet.dest_port = BOOT_RUP;
-	CmdBlkP->Packet.src_unit  = 0;
-	CmdBlkP->Packet.src_port  = BOOT_RUP;
-	CmdBlkP->Packet.len	   = 0x84;
-	CmdBlkP->Packet.data[0]   = ZOMBIE;
-	CmdBlkP->Packet.data[1]   = 0;
-	CmdBlkP->Packet.data[2]   = ZOMBIE_MAGIC & 0xFF;
-	CmdBlkP->Packet.data[3]   = (ZOMBIE_MAGIC >> 8) & 0xFF;
-
-	if ( RIOQueueCmdBlk( HostP, MapP->ID-1, CmdBlkP) == RIO_FAIL ) {
-		rio_dprintk (RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n");
+	CmdBlkP->Packet.src_unit = 0;
+	CmdBlkP->Packet.src_port = BOOT_RUP;
+	CmdBlkP->Packet.len = 0x84;
+	CmdBlkP->Packet.data[0] = ZOMBIE;
+	CmdBlkP->Packet.data[1] = 0;
+	CmdBlkP->Packet.data[2] = ZOMBIE_MAGIC & 0xFF;
+	CmdBlkP->Packet.data[3] = (ZOMBIE_MAGIC >> 8) & 0xFF;
+
+	if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
+		rio_dprintk(RIO_DEBUG_CMD, "ZOMBIE RTA: Failed to queue zombie command\n");
 		return -EIO;
 	}
 	return 0;
 }
 
-int
-RIOCommandRta(struct rio_info *p, uint RtaUnique,
-	int (* func)(struct Host *HostP, struct Map *MapP))
+int RIOCommandRta(struct rio_info *p, uint RtaUnique, int (*func) (struct Host * HostP, struct Map * MapP))
 {
 	uint Host;
 
-	rio_dprintk (RIO_DEBUG_CMD, "Command RTA 0x%x func 0x%x\n", RtaUnique, (int)func);
+	rio_dprintk(RIO_DEBUG_CMD, "Command RTA 0x%x func 0x%x\n", RtaUnique, (int) func);
 
-	if ( !RtaUnique )
-		return(0);
+	if (!RtaUnique)
+		return (0);
 
-	for ( Host = 0; Host < p->RIONumHosts; Host++ ) {
+	for (Host = 0; Host < p->RIONumHosts; Host++) {
 		uint Rta;
 		struct Host *HostP = &p->RIOHosts[Host];
 
-		for ( Rta = 0; Rta < RTAS_PER_HOST; Rta++ ) {
+		for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) {
 			struct Map *MapP = &HostP->Mapping[Rta];
 
-			if ( MapP->RtaUniqueNum == RtaUnique ) {
+			if (MapP->RtaUniqueNum == RtaUnique) {
 				uint Link;
 
 				/*
-				** now, lets just check we have a route to it...
-				** IF the routing stuff is working, then one of the
-				** topology entries for this unit will have a legit
-				** route *somewhere*. We care not where - if its got
-				** any connections, we can get to it.
-				*/
-				for ( Link = 0; Link < LINKS_PER_UNIT; Link++ ) {
-					if ( MapP->Topology[Link].Unit <= (uchar)MAX_RUP ) {
+				 ** now, lets just check we have a route to it...
+				 ** IF the routing stuff is working, then one of the
+				 ** topology entries for this unit will have a legit
+				 ** route *somewhere*. We care not where - if its got
+				 ** any connections, we can get to it.
+				 */
+				for (Link = 0; Link < LINKS_PER_UNIT; Link++) {
+					if (MapP->Topology[Link].Unit <= (uchar) MAX_RUP) {
 						/*
-						** Its worth trying the operation...
-						*/
-						return (*func)( HostP, MapP );
+						 ** Its worth trying the operation...
+						 */
+						return (*func) (HostP, MapP);
 					}
 				}
 			}
@@ -188,60 +184,59 @@ RIOCommandRta(struct rio_info *p, uint RtaUnique,
 }
 
 
-int
-RIOIdentifyRta(struct rio_info *p, caddr_t arg)
+int RIOIdentifyRta(struct rio_info *p, caddr_t arg)
 {
 	uint Host;
 
-	if ( copyin( (int)arg, (caddr_t)&IdRta, sizeof(IdRta) ) == COPYFAIL ) {
-		rio_dprintk (RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n");
+	if (copyin((int) arg, (caddr_t) & IdRta, sizeof(IdRta)) == COPYFAIL) {
+		rio_dprintk(RIO_DEBUG_CMD, "RIO_IDENTIFY_RTA copy failed\n");
 		p->RIOError.Error = COPYIN_FAILED;
 		return -EFAULT;
 	}
 
-	for ( Host = 0 ; Host < p->RIONumHosts; Host++ ) {
+	for (Host = 0; Host < p->RIONumHosts; Host++) {
 		uint Rta;
 		struct Host *HostP = &p->RIOHosts[Host];
 
-		for ( Rta = 0; Rta < RTAS_PER_HOST; Rta++ ) {
+		for (Rta = 0; Rta < RTAS_PER_HOST; Rta++) {
 			struct Map *MapP = &HostP->Mapping[Rta];
 
-			if ( MapP->RtaUniqueNum == IdRta.RtaUnique ) {
+			if (MapP->RtaUniqueNum == IdRta.RtaUnique) {
 				uint Link;
 				/*
-				** now, lets just check we have a route to it...
-				** IF the routing stuff is working, then one of the
-				** topology entries for this unit will have a legit
-				** route *somewhere*. We care not where - if its got
-				** any connections, we can get to it.
-				*/
-				for ( Link = 0; Link < LINKS_PER_UNIT; Link++ ) {
-					if ( MapP->Topology[Link].Unit <= (uchar)MAX_RUP ) {
+				 ** now, lets just check we have a route to it...
+				 ** IF the routing stuff is working, then one of the
+				 ** topology entries for this unit will have a legit
+				 ** route *somewhere*. We care not where - if its got
+				 ** any connections, we can get to it.
+				 */
+				for (Link = 0; Link < LINKS_PER_UNIT; Link++) {
+					if (MapP->Topology[Link].Unit <= (uchar) MAX_RUP) {
 						/*
-						** Its worth trying the operation...
-						*/
+						 ** Its worth trying the operation...
+						 */
 						struct CmdBlk *CmdBlkP;
 
-						rio_dprintk (RIO_DEBUG_CMD, "IDENTIFY RTA\n");
+						rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA\n");
 
 						CmdBlkP = RIOGetCmdBlk();
 
-						if ( !CmdBlkP ) {
-							rio_dprintk (RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n");
+						if (!CmdBlkP) {
+							rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: GetCmdBlk failed\n");
 							return -ENXIO;
 						}
-		
+
 						CmdBlkP->Packet.dest_unit = MapP->ID;
 						CmdBlkP->Packet.dest_port = BOOT_RUP;
-						CmdBlkP->Packet.src_unit  = 0;
-						CmdBlkP->Packet.src_port  = BOOT_RUP;
-						CmdBlkP->Packet.len	   = 0x84;
-						CmdBlkP->Packet.data[0]   = IDENTIFY;
-						CmdBlkP->Packet.data[1]   = 0;
-						CmdBlkP->Packet.data[2]   = IdRta.ID;
-		
-						if ( RIOQueueCmdBlk( HostP, MapP->ID-1, CmdBlkP) == RIO_FAIL ) {
-							rio_dprintk (RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n");
+						CmdBlkP->Packet.src_unit = 0;
+						CmdBlkP->Packet.src_port = BOOT_RUP;
+						CmdBlkP->Packet.len = 0x84;
+						CmdBlkP->Packet.data[0] = IDENTIFY;
+						CmdBlkP->Packet.data[1] = 0;
+						CmdBlkP->Packet.data[2] = IdRta.ID;
+
+						if (RIOQueueCmdBlk(HostP, MapP->ID - 1, CmdBlkP) == RIO_FAIL) {
+							rio_dprintk(RIO_DEBUG_CMD, "IDENTIFY RTA: Failed to queue command\n");
 							return -EIO;
 						}
 						return 0;
@@ -249,114 +244,110 @@ RIOIdentifyRta(struct rio_info *p, caddr_t arg)
 				}
 			}
 		}
-	} 
+	}
 	return -ENOENT;
 }
 
 
-int
-RIOKillNeighbour(struct rio_info *p, caddr_t arg)
+int RIOKillNeighbour(struct rio_info *p, caddr_t arg)
 {
 	uint Host;
 	uint ID;
 	struct Host *HostP;
 	struct CmdBlk *CmdBlkP;
 
-	rio_dprintk (RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n");
+	rio_dprintk(RIO_DEBUG_CMD, "KILL HOST NEIGHBOUR\n");
 
-	if ( copyin( (int)arg, (caddr_t)&KillUnit, sizeof(KillUnit) ) == COPYFAIL ) {
-		rio_dprintk (RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n");
+	if (copyin((int) arg, (caddr_t) & KillUnit, sizeof(KillUnit)) == COPYFAIL) {
+		rio_dprintk(RIO_DEBUG_CMD, "RIO_KILL_NEIGHBOUR copy failed\n");
 		p->RIOError.Error = COPYIN_FAILED;
 		return -EFAULT;
 	}
 
-	if ( KillUnit.Link > 3 )
+	if (KillUnit.Link > 3)
 		return -ENXIO;
- 
+
 	CmdBlkP = RIOGetCmdBlk();
 
-	if ( !CmdBlkP ) {
-		rio_dprintk (RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n");
+	if (!CmdBlkP) {
+		rio_dprintk(RIO_DEBUG_CMD, "UFOAD: GetCmdBlk failed\n");
 		return -ENXIO;
 	}
 
 	CmdBlkP->Packet.dest_unit = 0;
-	CmdBlkP->Packet.src_unit  = 0;
+	CmdBlkP->Packet.src_unit = 0;
 	CmdBlkP->Packet.dest_port = BOOT_RUP;
-	CmdBlkP->Packet.src_port  = BOOT_RUP;
-	CmdBlkP->Packet.len	   = 0x84;
-	CmdBlkP->Packet.data[0]   = UFOAD;
-	CmdBlkP->Packet.data[1]   = KillUnit.Link;
-	CmdBlkP->Packet.data[2]   = UFOAD_MAGIC & 0xFF;
-	CmdBlkP->Packet.data[3]   = (UFOAD_MAGIC >> 8) & 0xFF;
-
-	for ( Host = 0; Host < p->RIONumHosts; Host++ ) {
+	CmdBlkP->Packet.src_port = BOOT_RUP;
+	CmdBlkP->Packet.len = 0x84;
+	CmdBlkP->Packet.data[0] = UFOAD;
+	CmdBlkP->Packet.data[1] = KillUnit.Link;
+	CmdBlkP->Packet.data[2] = UFOAD_MAGIC & 0xFF;
+	CmdBlkP->Packet.data[3] = (UFOAD_MAGIC >> 8) & 0xFF;
+
+	for (Host = 0; Host < p->RIONumHosts; Host++) {
 		ID = 0;
 		HostP = &p->RIOHosts[Host];
 
-		if ( HostP->UniqueNum == KillUnit.UniqueNum ) {
-			if ( RIOQueueCmdBlk( HostP, RTAS_PER_HOST+KillUnit.Link,
-							CmdBlkP) == RIO_FAIL ) {
-				rio_dprintk (RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
+		if (HostP->UniqueNum == KillUnit.UniqueNum) {
+			if (RIOQueueCmdBlk(HostP, RTAS_PER_HOST + KillUnit.Link, CmdBlkP) == RIO_FAIL) {
+				rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
 				return -EIO;
 			}
 			return 0;
 		}
 
-		for ( ID=0; ID < RTAS_PER_HOST; ID++ ) {
-			if ( HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum ) {
-				CmdBlkP->Packet.dest_unit = ID+1;
-				if ( RIOQueueCmdBlk( HostP, ID, CmdBlkP) == RIO_FAIL ) {
-					rio_dprintk (RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
+		for (ID = 0; ID < RTAS_PER_HOST; ID++) {
+			if (HostP->Mapping[ID].RtaUniqueNum == KillUnit.UniqueNum) {
+				CmdBlkP->Packet.dest_unit = ID + 1;
+				if (RIOQueueCmdBlk(HostP, ID, CmdBlkP) == RIO_FAIL) {
+					rio_dprintk(RIO_DEBUG_CMD, "UFOAD: Failed queue command\n");
 					return -EIO;
 				}
 				return 0;
 			}
 		}
 	}
-	RIOFreeCmdBlk( CmdBlkP );
+	RIOFreeCmdBlk(CmdBlkP);
 	return -ENXIO;
 }
 
-int
-RIOSuspendBootRta(struct Host *HostP, int ID, int Link)
+int RIOSuspendBootRta(struct Host *HostP, int ID, int Link)
 {
 	struct CmdBlk *CmdBlkP;
 
-	rio_dprintk (RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link);
+	rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA ID %d, link %c\n", ID, 'A' + Link);
 
 	CmdBlkP = RIOGetCmdBlk();
 
-	if ( !CmdBlkP ) {
-		rio_dprintk (RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n");
+	if (!CmdBlkP) {
+		rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: GetCmdBlk failed\n");
 		return -ENXIO;
 	}
 
 	CmdBlkP->Packet.dest_unit = ID;
 	CmdBlkP->Packet.dest_port = BOOT_RUP;
-	CmdBlkP->Packet.src_unit  = 0;
-	CmdBlkP->Packet.src_port  = BOOT_RUP;
-	CmdBlkP->Packet.len	   = 0x84;
-	CmdBlkP->Packet.data[0]   = IWAIT;
-	CmdBlkP->Packet.data[1]   = Link;
-	CmdBlkP->Packet.data[2]   = IWAIT_MAGIC & 0xFF;
-	CmdBlkP->Packet.data[3]   = (IWAIT_MAGIC >> 8) & 0xFF;
-
-	if ( RIOQueueCmdBlk( HostP, ID - 1, CmdBlkP) == RIO_FAIL ) {
-		rio_dprintk (RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n");
+	CmdBlkP->Packet.src_unit = 0;
+	CmdBlkP->Packet.src_port = BOOT_RUP;
+	CmdBlkP->Packet.len = 0x84;
+	CmdBlkP->Packet.data[0] = IWAIT;
+	CmdBlkP->Packet.data[1] = Link;
+	CmdBlkP->Packet.data[2] = IWAIT_MAGIC & 0xFF;
+	CmdBlkP->Packet.data[3] = (IWAIT_MAGIC >> 8) & 0xFF;
+
+	if (RIOQueueCmdBlk(HostP, ID - 1, CmdBlkP) == RIO_FAIL) {
+		rio_dprintk(RIO_DEBUG_CMD, "SUSPEND BOOT ON RTA: Failed to queue iwait command\n");
 		return -EIO;
 	}
 	return 0;
 }
 
-int
-RIOFoadWakeup(struct rio_info *p)
+int RIOFoadWakeup(struct rio_info *p)
 {
 	int port;
 	register struct Port *PortP;
 	unsigned long flags;
 
-	for ( port=0; port<RIO_PORTS; port++) {
+	for (port = 0; port < RIO_PORTS; port++) {
 		PortP = p->RIOPortp[port];
 
 		rio_spin_lock_irqsave(&PortP->portSem, flags);
@@ -377,16 +368,15 @@ RIOFoadWakeup(struct rio_info *p)
 		PortP->TxBufferOut = 0;
 		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 	}
-	return(0);
+	return (0);
 }
 
 /*
 ** Incoming command on the COMMAND_RUP to be processed.
 */
-static int
-RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *PacketP)
+static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * PacketP)
 {
-	struct PktCmd *PktCmdP = (struct PktCmd *)PacketP->data;
+	struct PktCmd *PktCmdP = (struct PktCmd *) PacketP->data;
 	struct Port *PortP;
 	struct UnixRup *UnixRupP;
 	ushort SysPort;
@@ -395,128 +385,114 @@ RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *PacketP)
 	ushort subCommand;
 	unsigned long flags;
 
-	func_enter ();
+	func_enter();
 
 #ifdef CHECK
-	CheckHost( Host );
-	CheckHostP( HostP );
-	CheckPacketP( PacketP );
+	CheckHost(Host);
+	CheckHostP(HostP);
+	CheckPacketP(PacketP);
 #endif
 
 	/*
-	** 16 port RTA note:
-	** Command rup packets coming from the RTA will have pkt->data[1] (which
-	** translates to PktCmdP->PhbNum) set to the host port number for the
-	** particular unit. To access the correct BaseSysPort for a 16 port RTA,
-	** we can use PhbNum to get the rup number for the appropriate 8 port
-	** block (for the first block, this should be equal to 'Rup').
-	*/
-	rup = RBYTE(PktCmdP->PhbNum) / (ushort)PORTS_PER_RTA;
+	 ** 16 port RTA note:
+	 ** Command rup packets coming from the RTA will have pkt->data[1] (which
+	 ** translates to PktCmdP->PhbNum) set to the host port number for the
+	 ** particular unit. To access the correct BaseSysPort for a 16 port RTA,
+	 ** we can use PhbNum to get the rup number for the appropriate 8 port
+	 ** block (for the first block, this should be equal to 'Rup').
+	 */
+	rup = RBYTE(PktCmdP->PhbNum) / (ushort) PORTS_PER_RTA;
 	UnixRupP = &HostP->UnixRups[rup];
-	SysPort = UnixRupP->BaseSysPort + 
-			(RBYTE(PktCmdP->PhbNum) % (ushort)PORTS_PER_RTA);
-	rio_dprintk (RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort);
+	SysPort = UnixRupP->BaseSysPort + (RBYTE(PktCmdP->PhbNum) % (ushort) PORTS_PER_RTA);
+	rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort);
 
 #ifdef CHECK
-	CheckRup( rup );
-	CheckUnixRupP( UnixRupP );
+	CheckRup(rup);
+	CheckUnixRupP(UnixRupP);
 #endif
-	if ( UnixRupP->BaseSysPort == NO_PORT ) {
-		rio_dprintk (RIO_DEBUG_CMD, "OBSCURE ERROR!\n");
-		rio_dprintk (RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n");
-		rio_dprintk (RIO_DEBUG_CMD, "CONTROL information: Host number %d, name ``%s''\n", 
-			     HostP-p->RIOHosts, HostP->Name );
-		rio_dprintk (RIO_DEBUG_CMD, "CONTROL information: Rup number  0x%x\n", rup);
-
-		if ( Rup >= (ushort)MAX_RUP ) {
-			rio_dprintk (RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n",
-				     HostP->Mapping[Rup].Name);
+	if (UnixRupP->BaseSysPort == NO_PORT) {
+		rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n");
+		rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n");
+		rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Host number %d, name ``%s''\n", HostP - p->RIOHosts, HostP->Name);
+		rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: Rup number  0x%x\n", rup);
+
+		if (Rup >= (ushort) MAX_RUP) {
+			rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for RTA ``%s''\n", HostP->Mapping[Rup].Name);
 		} else
-			rio_dprintk (RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", 
-				     ('A' + Rup - MAX_RUP), HostP->Name);
-
-		rio_dprintk (RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n",
-			     PacketP->dest_unit, PacketP->dest_port );
-		rio_dprintk (RIO_DEBUG_CMD, "PACKET information: Source	  0x%x:0x%x\n",
-			     PacketP->src_unit, PacketP->src_port );
-		rio_dprintk (RIO_DEBUG_CMD, "PACKET information: Length	  0x%x (%d)\n", PacketP->len,PacketP->len );
-		rio_dprintk (RIO_DEBUG_CMD, "PACKET information: Control	 0x%x (%d)\n", PacketP->control, PacketP->control);
-		rio_dprintk (RIO_DEBUG_CMD, "PACKET information: Check	   0x%x (%d)\n", PacketP->csum, PacketP->csum );
-		rio_dprintk (RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, "
-					"Command Code 0x%x\n", PktCmdP->PhbNum, PktCmdP->Command );
+			rio_dprintk(RIO_DEBUG_CMD, "CONTROL information: This is the RUP for link ``%c'' of host ``%s''\n", ('A' + Rup - MAX_RUP), HostP->Name);
+
+		rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Destination 0x%x:0x%x\n", PacketP->dest_unit, PacketP->dest_port);
+		rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Source	  0x%x:0x%x\n", PacketP->src_unit, PacketP->src_port);
+		rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Length	  0x%x (%d)\n", PacketP->len, PacketP->len);
+		rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Control	 0x%x (%d)\n", PacketP->control, PacketP->control);
+		rio_dprintk(RIO_DEBUG_CMD, "PACKET information: Check	   0x%x (%d)\n", PacketP->csum, PacketP->csum);
+		rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", PktCmdP->PhbNum, PktCmdP->Command);
 		return TRUE;
 	}
-
 #ifdef CHECK
-	CheckSysPort( SysPort );
+	CheckSysPort(SysPort);
 #endif
-	PortP = p->RIOPortp[ SysPort ];
+	PortP = p->RIOPortp[SysPort];
 	rio_spin_lock_irqsave(&PortP->portSem, flags);
-	switch( RBYTE(PktCmdP->Command) ) {
-		case BREAK_RECEIVED:
-			rio_dprintk (RIO_DEBUG_CMD, "Received a break!\n");
-			/* If the current line disc. is not multi-threading and
-	   			the current processor is not the default, reset rup_intr
-	   			and return FALSE to ensure that the command packet is
-	   			not freed. */
-			/* Call tmgr HANGUP HERE */
-			/* Fix this later when every thing works !!!! RAMRAJ */
-			gs_got_break (&PortP->gs);
+	switch (RBYTE(PktCmdP->Command)) {
+	case BREAK_RECEIVED:
+		rio_dprintk(RIO_DEBUG_CMD, "Received a break!\n");
+		/* If the current line disc. is not multi-threading and
+		   the current processor is not the default, reset rup_intr
+		   and return FALSE to ensure that the command packet is
+		   not freed. */
+		/* Call tmgr HANGUP HERE */
+		/* Fix this later when every thing works !!!! RAMRAJ */
+		gs_got_break(&PortP->gs);
+		break;
+
+	case COMPLETE:
+		rio_dprintk(RIO_DEBUG_CMD, "Command complete on phb %d host %d\n", RBYTE(PktCmdP->PhbNum), HostP - p->RIOHosts);
+		subCommand = 1;
+		switch (RBYTE(PktCmdP->SubCommand)) {
+		case MEMDUMP:
+			rio_dprintk(RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n", RBYTE(PktCmdP->SubCommand), RWORD(PktCmdP->SubAddr));
 			break;
+		case READ_REGISTER:
+			rio_dprintk(RIO_DEBUG_CMD, "Read register (0x%x)\n", RWORD(PktCmdP->SubAddr));
+			p->CdRegister = (RBYTE(PktCmdP->ModemStatus) & MSVR1_HOST);
+			break;
+		default:
+			subCommand = 0;
+			break;
+		}
+		if (subCommand)
+			break;
+		rio_dprintk(RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n", RBYTE(PktCmdP->PortStatus), PortP->PortState);
+		if (PortP->PortState != RBYTE(PktCmdP->PortStatus)) {
+			rio_dprintk(RIO_DEBUG_CMD, "Mark status & wakeup\n");
+			PortP->PortState = RBYTE(PktCmdP->PortStatus);
+			/* What should we do here ...
+			   wakeup( &PortP->PortState );
+			 */
+		} else
+			rio_dprintk(RIO_DEBUG_CMD, "No change\n");
 
-		case COMPLETE:
-			rio_dprintk (RIO_DEBUG_CMD, "Command complete on phb %d host %d\n",
-			     RBYTE(PktCmdP->PhbNum), HostP-p->RIOHosts);
-			subCommand = 1;
-			switch (RBYTE(PktCmdP->SubCommand)) {
-				case MEMDUMP :
-			rio_dprintk (RIO_DEBUG_CMD, "Memory dump cmd (0x%x) from addr 0x%x\n",
-				     RBYTE(PktCmdP->SubCommand), RWORD(PktCmdP->SubAddr));
-					break;
-				case READ_REGISTER :
-			rio_dprintk (RIO_DEBUG_CMD, "Read register (0x%x)\n", RWORD(PktCmdP->SubAddr));
-					p->CdRegister = (RBYTE(PktCmdP->ModemStatus) & MSVR1_HOST);
-					break;
-				default :
-					subCommand = 0;
-				break;
-			}
-			if (subCommand)
-				break;
-			rio_dprintk (RIO_DEBUG_CMD, "New status is 0x%x was 0x%x\n",
-				     RBYTE(PktCmdP->PortStatus),PortP->PortState);
-			if (PortP->PortState != RBYTE(PktCmdP->PortStatus)) {
-				rio_dprintk (RIO_DEBUG_CMD, "Mark status & wakeup\n");
-				PortP->PortState = RBYTE(PktCmdP->PortStatus);
-				/* What should we do here ...
-				wakeup( &PortP->PortState );
-				*/
-		} else 
-			rio_dprintk (RIO_DEBUG_CMD, "No change\n");
-
-			/* FALLTHROUGH */
-		case MODEM_STATUS:
+		/* FALLTHROUGH */
+	case MODEM_STATUS:
+		/*
+		 ** Knock out the tbusy and tstop bits, as these are not relevant
+		 ** to the check for modem status change (they're just there because
+		 ** it's a convenient place to put them!).
+		 */
+		ReportedModemStatus = RBYTE(PktCmdP->ModemStatus);
+		if ((PortP->ModemState & MSVR1_HOST) == (ReportedModemStatus & MSVR1_HOST)) {
+			rio_dprintk(RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState);
 			/*
-			** Knock out the tbusy and tstop bits, as these are not relevant
-			** to the check for modem status change (they're just there because
-			** it's a convenient place to put them!).
-			*/
-			ReportedModemStatus = RBYTE(PktCmdP->ModemStatus);
-			if ((PortP->ModemState & MSVR1_HOST) ==
-					(ReportedModemStatus & MSVR1_HOST)) {
-				rio_dprintk (RIO_DEBUG_CMD, "Modem status unchanged 0x%x\n", PortP->ModemState);
-				/*
-				** Update ModemState just in case tbusy or tstop states have
-				** changed.
-				*/
-				PortP->ModemState = ReportedModemStatus;
-			}
-			else {
-				rio_dprintk (RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n",
-				     PortP->ModemState, ReportedModemStatus);
-				PortP->ModemState = ReportedModemStatus;
+			 ** Update ModemState just in case tbusy or tstop states have
+			 ** changed.
+			 */
+			PortP->ModemState = ReportedModemStatus;
+		} else {
+			rio_dprintk(RIO_DEBUG_CMD, "Modem status change from 0x%x to 0x%x\n", PortP->ModemState, ReportedModemStatus);
+			PortP->ModemState = ReportedModemStatus;
 #ifdef MODEM_SUPPORT
-				if ( PortP->Mapped ) {
+			if (PortP->Mapped) {
 				/***********************************************************\
 				*************************************************************
 				***													   ***
@@ -525,68 +501,67 @@ RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *PacketP)
 				*************************************************************
 				\***********************************************************/
 				/*
-				** If the device is a modem, then check the modem
-				** carrier.
-				*/
+				 ** If the device is a modem, then check the modem
+				 ** carrier.
+				 */
 				if (PortP->gs.tty == NULL)
 					break;
 				if (PortP->gs.tty->termios == NULL)
 					break;
-			  
-				if (!(PortP->gs.tty->termios->c_cflag & CLOCAL) &&
-				((PortP->State & (RIO_MOPEN|RIO_WOPEN)))) {
 
-					rio_dprintk (RIO_DEBUG_CMD, "Is there a Carrier?\n");
-			/*
-			** Is there a carrier?
-			*/
-					if ( PortP->ModemState & MSVR1_CD ) {
-			/*
-			** Has carrier just appeared?
-			*/
+				if (!(PortP->gs.tty->termios->c_cflag & CLOCAL) && ((PortP->State & (RIO_MOPEN | RIO_WOPEN)))) {
+
+					rio_dprintk(RIO_DEBUG_CMD, "Is there a Carrier?\n");
+					/*
+					 ** Is there a carrier?
+					 */
+					if (PortP->ModemState & MSVR1_CD) {
+						/*
+						 ** Has carrier just appeared?
+						 */
 						if (!(PortP->State & RIO_CARR_ON)) {
-							rio_dprintk (RIO_DEBUG_CMD, "Carrier just came up.\n");
+							rio_dprintk(RIO_DEBUG_CMD, "Carrier just came up.\n");
 							PortP->State |= RIO_CARR_ON;
-				/*
-				** wakeup anyone in WOPEN
-				*/
-							if (PortP->State & (PORT_ISOPEN | RIO_WOPEN) )
-								wake_up_interruptible (&PortP->gs.open_wait);
+							/*
+							 ** wakeup anyone in WOPEN
+							 */
+							if (PortP->State & (PORT_ISOPEN | RIO_WOPEN))
+								wake_up_interruptible(&PortP->gs.open_wait);
 #ifdef STATS
-				PortP->Stat.ModemOnCnt++;
+							PortP->Stat.ModemOnCnt++;
 #endif
-			}
+						}
 					} else {
-			/*
-			** Has carrier just dropped?
-			*/
+						/*
+						 ** Has carrier just dropped?
+						 */
 						if (PortP->State & RIO_CARR_ON) {
-							if (PortP->State & (PORT_ISOPEN|RIO_WOPEN|RIO_MOPEN))
-								tty_hangup (PortP->gs.tty);
+							if (PortP->State & (PORT_ISOPEN | RIO_WOPEN | RIO_MOPEN))
+								tty_hangup(PortP->gs.tty);
 							PortP->State &= ~RIO_CARR_ON;
-							rio_dprintk (RIO_DEBUG_CMD, "Carrirer just went down\n");
+							rio_dprintk(RIO_DEBUG_CMD, "Carrirer just went down\n");
 #ifdef STATS
-				PortP->Stat.ModemOffCnt++;
+							PortP->Stat.ModemOffCnt++;
 #endif
+						}
+					}
+				}
 			}
-			}
-		}
-		}
 #endif
-			}
-			break;
+		}
+		break;
 
-		default:
-			rio_dprintk (RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %d\n",
-			     RBYTE(PktCmdP->Command),HostP-p->RIOHosts);
-			break;
+	default:
+		rio_dprintk(RIO_DEBUG_CMD, "Unknown command %d on CMD_RUP of host %d\n", RBYTE(PktCmdP->Command), HostP - p->RIOHosts);
+		break;
 	}
 	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 
-	func_exit ();
+	func_exit();
 
 	return TRUE;
 }
+
 /*
 ** The command mechanism:
 **	Each rup has a chain of commands associated with it.
@@ -600,12 +575,11 @@ RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *PacketP)
 /*
 ** Allocate an empty command block.
 */
-struct CmdBlk *
-RIOGetCmdBlk(void)
+struct CmdBlk *RIOGetCmdBlk(void)
 {
 	struct CmdBlk *CmdBlkP;
 
-	CmdBlkP = (struct CmdBlk *)sysbrk(sizeof(struct CmdBlk));
+	CmdBlkP = (struct CmdBlk *) sysbrk(sizeof(struct CmdBlk));
 	if (CmdBlkP)
 		bzero(CmdBlkP, sizeof(struct CmdBlk));
 
@@ -615,31 +589,29 @@ RIOGetCmdBlk(void)
 /*
 ** Return a block to the head of the free list.
 */
-void
-RIOFreeCmdBlk(struct CmdBlk *CmdBlkP)
+void RIOFreeCmdBlk(struct CmdBlk *CmdBlkP)
 {
-	sysfree((void *)CmdBlkP, sizeof(struct CmdBlk));
+	sysfree((void *) CmdBlkP, sizeof(struct CmdBlk));
 }
 
 /*
 ** attach a command block to the list of commands to be performed for
 ** a given rup.
 */
-int
-RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
+int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
 {
 	struct CmdBlk **Base;
 	struct UnixRup *UnixRupP;
 	unsigned long flags;
 
 #ifdef CHECK
-	CheckHostP( HostP );
-	CheckRup( Rup );
-	CheckCmdBlkP( CmdBlkP );
+	CheckHostP(HostP);
+	CheckRup(Rup);
+	CheckCmdBlkP(CmdBlkP);
 #endif
-	if ( Rup >= (ushort)(MAX_RUP+LINKS_PER_UNIT) ) {
-		rio_dprintk (RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n",Rup);
-		RIOFreeCmdBlk( CmdBlkP );
+	if (Rup >= (ushort) (MAX_RUP + LINKS_PER_UNIT)) {
+		rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup);
+		RIOFreeCmdBlk(CmdBlkP);
 		return RIO_FAIL;
 	}
 
@@ -648,57 +620,52 @@ RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
 	rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 
 	/*
-	** If the RUP is currently inactive, then put the request
-	** straight on the RUP....
-	*/
-	if ( (UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && 
-	     (RWORD(UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE ) &&
-		(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP)(CmdBlkP->PreArg,CmdBlkP)
-							:TRUE)) {
-		rio_dprintk (RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n",
-					     CmdBlkP->Packet.data[0]);
+	 ** If the RUP is currently inactive, then put the request
+	 ** straight on the RUP....
+	 */
+	if ((UnixRupP->CmdsWaitingP == NULL) && (UnixRupP->CmdPendingP == NULL) && (RWORD(UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE) && (CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP)
+																	     : TRUE)) {
+		rio_dprintk(RIO_DEBUG_CMD, "RUP inactive-placing command straight on. Cmd byte is 0x%x\n", CmdBlkP->Packet.data[0]);
 
 		/*
-		** Whammy! blat that pack!
-		*/
-		HostP->Copy( (caddr_t)&CmdBlkP->Packet, 
-			RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt ), sizeof(PKT) );
+		 ** Whammy! blat that pack!
+		 */
+		HostP->Copy((caddr_t) & CmdBlkP->Packet, RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt), sizeof(PKT));
 
 		/*
-		** place command packet on the pending position.
-		*/
+		 ** place command packet on the pending position.
+		 */
 		UnixRupP->CmdPendingP = CmdBlkP;
 
 		/*
-		** set the command register
-		*/
-		WWORD(UnixRupP->RupP->txcontrol , TX_PACKET_READY);
+		 ** set the command register
+		 */
+		WWORD(UnixRupP->RupP->txcontrol, TX_PACKET_READY);
 
 		rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
 
 		return RIO_SUCCESS;
 	}
-	rio_dprintk (RIO_DEBUG_CMD, "RUP active - en-queing\n");
+	rio_dprintk(RIO_DEBUG_CMD, "RUP active - en-queing\n");
 
-	if ( UnixRupP->CmdsWaitingP != NULL)
-		rio_dprintk (RIO_DEBUG_CMD, "Rup active - command waiting\n");
-	if ( UnixRupP->CmdPendingP != NULL )
-		rio_dprintk (RIO_DEBUG_CMD, "Rup active - command pending\n");
-	if ( RWORD(UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE )
-		rio_dprintk (RIO_DEBUG_CMD, "Rup active - command rup not ready\n");
+	if (UnixRupP->CmdsWaitingP != NULL)
+		rio_dprintk(RIO_DEBUG_CMD, "Rup active - command waiting\n");
+	if (UnixRupP->CmdPendingP != NULL)
+		rio_dprintk(RIO_DEBUG_CMD, "Rup active - command pending\n");
+	if (RWORD(UnixRupP->RupP->txcontrol) != TX_RUP_INACTIVE)
+		rio_dprintk(RIO_DEBUG_CMD, "Rup active - command rup not ready\n");
 
 	Base = &UnixRupP->CmdsWaitingP;
 
-	rio_dprintk (RIO_DEBUG_CMD, "First try to queue cmdblk 0x%x at 0x%x\n", (int)CmdBlkP,(int)Base);
+	rio_dprintk(RIO_DEBUG_CMD, "First try to queue cmdblk 0x%x at 0x%x\n", (int) CmdBlkP, (int) Base);
 
-	while ( *Base ) {
-		rio_dprintk (RIO_DEBUG_CMD, "Command cmdblk 0x%x here\n", (int)(*Base));
+	while (*Base) {
+		rio_dprintk(RIO_DEBUG_CMD, "Command cmdblk 0x%x here\n", (int) (*Base));
 		Base = &((*Base)->NextP);
-		rio_dprintk (RIO_DEBUG_CMD, "Now try to queue cmd cmdblk 0x%x at 0x%x\n",
-					     (int)CmdBlkP,(int)Base);
+		rio_dprintk(RIO_DEBUG_CMD, "Now try to queue cmd cmdblk 0x%x at 0x%x\n", (int) CmdBlkP, (int) Base);
 	}
 
-	rio_dprintk (RIO_DEBUG_CMD, "Will queue cmdblk 0x%x at 0x%x\n",(int)CmdBlkP,(int)Base);
+	rio_dprintk(RIO_DEBUG_CMD, "Will queue cmdblk 0x%x at 0x%x\n", (int) CmdBlkP, (int) Base);
 
 	*Base = CmdBlkP;
 
@@ -713,8 +680,7 @@ RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
 ** Here we go - if there is an empty rup, fill it!
 ** must be called at splrio() or higher.
 */
-void
-RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
+void RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
 {
 	register struct CmdBlk *CmdBlkP;
 	register struct UnixRup *UnixRupP;
@@ -723,262 +689,246 @@ RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
 	unsigned long flags;
 
 
-	Rup = MAX_RUP+LINKS_PER_UNIT;
+	Rup = MAX_RUP + LINKS_PER_UNIT;
 
-	do {	/* do this loop for each RUP */
+	do {			/* do this loop for each RUP */
 		/*
-		** locate the rup we are processing & lock it
-		*/
+		 ** locate the rup we are processing & lock it
+		 */
 		UnixRupP = &HostP->UnixRups[--Rup];
 
 		spin_lock_irqsave(&UnixRupP->RupLock, flags);
 
 		/*
-		** First check for incoming commands:
-		*/
-		if ( RWORD(UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE ) {
+		 ** First check for incoming commands:
+		 */
+		if (RWORD(UnixRupP->RupP->rxcontrol) != RX_RUP_INACTIVE) {
 			int FreeMe;
 
-			PacketP =(PKT *)RIO_PTR(HostP->Caddr,RWORD(UnixRupP->RupP->rxpkt));
+			PacketP = (PKT *) RIO_PTR(HostP->Caddr, RWORD(UnixRupP->RupP->rxpkt));
 
-			ShowPacket( DBG_CMD, PacketP );
+			ShowPacket(DBG_CMD, PacketP);
 
-			switch ( RBYTE(PacketP->dest_port) ) {
-				case BOOT_RUP:
-					rio_dprintk (RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", 
-						RBYTE(PacketP->len) & 0x80 ? "Command":"Data", 
-							     RBYTE(PacketP->data[0])); 
-					rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
-					FreeMe= RIOBootRup(p, Rup,HostP,PacketP);
-					rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
-					break;
+			switch (RBYTE(PacketP->dest_port)) {
+			case BOOT_RUP:
+				rio_dprintk(RIO_DEBUG_CMD, "Incoming Boot %s packet '%x'\n", RBYTE(PacketP->len) & 0x80 ? "Command" : "Data", RBYTE(PacketP->data[0]));
+				rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
+				FreeMe = RIOBootRup(p, Rup, HostP, PacketP);
+				rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
+				break;
 
-				case COMMAND_RUP:
-					/*
-					** Free the RUP lock as loss of carrier causes a
-					** ttyflush which will (eventually) call another
-					** routine that uses the RUP lock.
-					*/
-					rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
-					FreeMe= RIOCommandRup(p, Rup,HostP,PacketP);
-					if (PacketP->data[5] == MEMDUMP) {
-						rio_dprintk (RIO_DEBUG_CMD, "Memdump from 0x%x complete\n",
-								     *(ushort *) &(PacketP->data[6]));
-						HostP->Copy( (caddr_t)&(PacketP->data[8]), 
-								(caddr_t)p->RIOMemDump, 32 );
-					}
-					rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
-					break;
+			case COMMAND_RUP:
+				/*
+				 ** Free the RUP lock as loss of carrier causes a
+				 ** ttyflush which will (eventually) call another
+				 ** routine that uses the RUP lock.
+				 */
+				rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
+				FreeMe = RIOCommandRup(p, Rup, HostP, PacketP);
+				if (PacketP->data[5] == MEMDUMP) {
+					rio_dprintk(RIO_DEBUG_CMD, "Memdump from 0x%x complete\n", *(ushort *) & (PacketP->data[6]));
+					HostP->Copy((caddr_t) & (PacketP->data[8]), (caddr_t) p->RIOMemDump, 32);
+				}
+				rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
+				break;
 
-				case ROUTE_RUP:
-					rio_spin_unlock_irqrestore( &UnixRupP->RupLock, flags);
-					FreeMe = RIORouteRup(p, Rup, HostP, PacketP );
-					rio_spin_lock_irqsave( &UnixRupP->RupLock, flags );
-					break;
+			case ROUTE_RUP:
+				rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
+				FreeMe = RIORouteRup(p, Rup, HostP, PacketP);
+				rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
+				break;
 
-				default:
-					rio_dprintk (RIO_DEBUG_CMD, "Unknown RUP %d\n", RBYTE(PacketP->dest_port));
-					FreeMe = 1;
-					break;
+			default:
+				rio_dprintk(RIO_DEBUG_CMD, "Unknown RUP %d\n", RBYTE(PacketP->dest_port));
+				FreeMe = 1;
+				break;
 			}
 
-			if ( FreeMe ) {
-				rio_dprintk (RIO_DEBUG_CMD, "Free processed incoming command packet\n");
-				put_free_end(HostP,PacketP);
+			if (FreeMe) {
+				rio_dprintk(RIO_DEBUG_CMD, "Free processed incoming command packet\n");
+				put_free_end(HostP, PacketP);
 
-				WWORD(UnixRupP->RupP->rxcontrol , RX_RUP_INACTIVE);
+				WWORD(UnixRupP->RupP->rxcontrol, RX_RUP_INACTIVE);
 
-				if ( RWORD(UnixRupP->RupP->handshake)==PHB_HANDSHAKE_SET ) {
-					rio_dprintk (RIO_DEBUG_CMD, "Handshake rup %d\n",Rup);
-					WWORD(UnixRupP->RupP->handshake,
-						PHB_HANDSHAKE_SET|PHB_HANDSHAKE_RESET);
+				if (RWORD(UnixRupP->RupP->handshake) == PHB_HANDSHAKE_SET) {
+					rio_dprintk(RIO_DEBUG_CMD, "Handshake rup %d\n", Rup);
+					WWORD(UnixRupP->RupP->handshake, PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET);
 				}
 			}
 		}
 
 		/*
-		** IF a command was running on the port, 
-		** and it has completed, then tidy it up.
-		*/
-		if ( (CmdBlkP = UnixRupP->CmdPendingP) && /* ASSIGN! */
-		     (RWORD(UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
+		 ** IF a command was running on the port,
+		 ** and it has completed, then tidy it up.
+		 */
+		if ((CmdBlkP = UnixRupP->CmdPendingP) &&	/* ASSIGN! */
+		    (RWORD(UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
 			/*
-			** we are idle.
-			** there is a command in pending.
-			** Therefore, this command has finished.
-			** So, wakeup whoever is waiting for it (and tell them
-			** what happened).
-			*/
-			if ( CmdBlkP->Packet.dest_port == BOOT_RUP )
-				rio_dprintk (RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", 
-						CmdBlkP->Packet.len & 0x80 ? "Command":"Data", 
-							     CmdBlkP->Packet.data[0]);
-
-			rio_dprintk (RIO_DEBUG_CMD, "Command 0x%x completed\n",(int)CmdBlkP);
+			 ** we are idle.
+			 ** there is a command in pending.
+			 ** Therefore, this command has finished.
+			 ** So, wakeup whoever is waiting for it (and tell them
+			 ** what happened).
+			 */
+			if (CmdBlkP->Packet.dest_port == BOOT_RUP)
+				rio_dprintk(RIO_DEBUG_CMD, "Free Boot %s Command Block '%x'\n", CmdBlkP->Packet.len & 0x80 ? "Command" : "Data", CmdBlkP->Packet.data[0]);
+
+			rio_dprintk(RIO_DEBUG_CMD, "Command 0x%x completed\n", (int) CmdBlkP);
 
 			/*
-			** Clear the Rup lock to prevent mutual exclusion.
-			*/
-			if ( CmdBlkP->PostFuncP ) {
+			 ** Clear the Rup lock to prevent mutual exclusion.
+			 */
+			if (CmdBlkP->PostFuncP) {
 				rio_spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
-				(*CmdBlkP->PostFuncP) (CmdBlkP->PostArg,CmdBlkP);
+				(*CmdBlkP->PostFuncP) (CmdBlkP->PostArg, CmdBlkP);
 				rio_spin_lock_irqsave(&UnixRupP->RupLock, flags);
 			}
 
 			/*
-			** ....clear the pending flag....
-			*/
+			 ** ....clear the pending flag....
+			 */
 			UnixRupP->CmdPendingP = NULL;
 
 			/*
-			** ....and return the command block to the freelist.
-			*/
-			RIOFreeCmdBlk( CmdBlkP );
+			 ** ....and return the command block to the freelist.
+			 */
+			RIOFreeCmdBlk(CmdBlkP);
 		}
 
 		/*
-		** If there is a command for this rup, and the rup
-		** is idle, then process the command
-		*/
-		if ( (CmdBlkP = UnixRupP->CmdsWaitingP) && /* ASSIGN! */
-			(UnixRupP->CmdPendingP == NULL) &&
-		     (RWORD(UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
+		 ** If there is a command for this rup, and the rup
+		 ** is idle, then process the command
+		 */
+		if ((CmdBlkP = UnixRupP->CmdsWaitingP) &&	/* ASSIGN! */
+		    (UnixRupP->CmdPendingP == NULL) && (RWORD(UnixRupP->RupP->txcontrol) == TX_RUP_INACTIVE)) {
 			/*
-			** if the pre-function is non-zero, call it.
-			** If it returns RIO_FAIL then don't
-			** send this command yet!
-			*/
+			 ** if the pre-function is non-zero, call it.
+			 ** If it returns RIO_FAIL then don't
+			 ** send this command yet!
+			 */
 #ifdef CHECK
-			CheckCmdBlkP (CmdBlkP);
+			CheckCmdBlkP(CmdBlkP);
 #endif
-			if ( !(CmdBlkP->PreFuncP ?
-				(*CmdBlkP->PreFuncP)(CmdBlkP->PreArg, CmdBlkP) : TRUE)) {
-				rio_dprintk (RIO_DEBUG_CMD, "Not ready to start command 0x%x\n",(int)CmdBlkP);
-			}
-			else {
-				rio_dprintk (RIO_DEBUG_CMD, "Start new command 0x%x Cmd byte is 0x%x\n",
-							     (int)CmdBlkP, CmdBlkP->Packet.data[0]);
+			if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : TRUE)) {
+				rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command 0x%x\n", (int) CmdBlkP);
+			} else {
+				rio_dprintk(RIO_DEBUG_CMD, "Start new command 0x%x Cmd byte is 0x%x\n", (int) CmdBlkP, CmdBlkP->Packet.data[0]);
 				/*
-				** Whammy! blat that pack!
-				*/
+				 ** Whammy! blat that pack!
+				 */
 #ifdef CHECK
-				CheckPacketP ((PKT *)RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt));
+				CheckPacketP((PKT *) RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt));
 #endif
-				HostP->Copy( (caddr_t)&CmdBlkP->Packet, 
-					RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt), sizeof(PKT));
+				HostP->Copy((caddr_t) & CmdBlkP->Packet, RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt), sizeof(PKT));
 
 				/*
-				** remove the command from the rup command queue...
-				*/
+				 ** remove the command from the rup command queue...
+				 */
 				UnixRupP->CmdsWaitingP = CmdBlkP->NextP;
 
 				/*
-				** ...and place it on the pending position.
-				*/
+				 ** ...and place it on the pending position.
+				 */
 				UnixRupP->CmdPendingP = CmdBlkP;
 
 				/*
-				** set the command register
-				*/
-				WWORD(UnixRupP->RupP->txcontrol,TX_PACKET_READY);
+				 ** set the command register
+				 */
+				WWORD(UnixRupP->RupP->txcontrol, TX_PACKET_READY);
 
 				/*
-				** the command block will be freed
-				** when the command has been processed.
-				*/
+				 ** the command block will be freed
+				 ** when the command has been processed.
+				 */
 			}
 		}
 		spin_unlock_irqrestore(&UnixRupP->RupLock, flags);
-	} while ( Rup );
+	} while (Rup);
 }
 
-int
-RIOWFlushMark(int iPortP, struct CmdBlk *CmdBlkP)
+int RIOWFlushMark(int iPortP, struct CmdBlk *CmdBlkP)
 {
-	struct Port *	PortP = (struct Port *)iPortP;
+	struct Port *PortP = (struct Port *) iPortP;
 	unsigned long flags;
 
 	rio_spin_lock_irqsave(&PortP->portSem, flags);
 #ifdef CHECK
-	CheckPortP( PortP );
+	CheckPortP(PortP);
 #endif
 	PortP->WflushFlag++;
 	PortP->MagicFlags |= MAGIC_FLUSH;
 	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-	return RIOUnUse( iPortP, CmdBlkP );
+	return RIOUnUse(iPortP, CmdBlkP);
 }
 
-int
-RIORFlushEnable(int iPortP, struct CmdBlk *CmdBlkP)
+int RIORFlushEnable(int iPortP, struct CmdBlk *CmdBlkP)
 {
-	struct Port *	PortP = (struct Port *)iPortP;
+	struct Port *PortP = (struct Port *) iPortP;
 	PKT *PacketP;
 	unsigned long flags;
 
 	rio_spin_lock_irqsave(&PortP->portSem, flags);
 
-	while ( can_remove_receive(&PacketP, PortP) ) {
+	while (can_remove_receive(&PacketP, PortP)) {
 		remove_receive(PortP);
-		ShowPacket(DBG_PROC, PacketP );
-		put_free_end( PortP->HostP, PacketP );
+		ShowPacket(DBG_PROC, PacketP);
+		put_free_end(PortP->HostP, PacketP);
 	}
 
-	if ( RWORD(PortP->PhbP->handshake)==PHB_HANDSHAKE_SET ) {
+	if (RWORD(PortP->PhbP->handshake) == PHB_HANDSHAKE_SET) {
 		/*
-		** MAGIC! (Basically, handshake the RX buffer, so that
-		** the RTAs upstream can be re-enabled.)
-		*/
-		rio_dprintk (RIO_DEBUG_CMD, "Util: Set RX handshake bit\n");
-		WWORD(PortP->PhbP->handshake, PHB_HANDSHAKE_SET|PHB_HANDSHAKE_RESET);
+		 ** MAGIC! (Basically, handshake the RX buffer, so that
+		 ** the RTAs upstream can be re-enabled.)
+		 */
+		rio_dprintk(RIO_DEBUG_CMD, "Util: Set RX handshake bit\n");
+		WWORD(PortP->PhbP->handshake, PHB_HANDSHAKE_SET | PHB_HANDSHAKE_RESET);
 	}
 	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-	return RIOUnUse( iPortP, CmdBlkP );
+	return RIOUnUse(iPortP, CmdBlkP);
 }
 
-int
-RIOUnUse(int iPortP, struct CmdBlk *CmdBlkP)
+int RIOUnUse(int iPortP, struct CmdBlk *CmdBlkP)
 {
-	struct Port *	PortP = (struct Port *)iPortP;
+	struct Port *PortP = (struct Port *) iPortP;
 	unsigned long flags;
 
 	rio_spin_lock_irqsave(&PortP->portSem, flags);
 
 #ifdef CHECK
-	CheckPortP( PortP );
+	CheckPortP(PortP);
 #endif
-	rio_dprintk (RIO_DEBUG_CMD, "Decrement in use count for port\n");
+	rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n");
 
 	if (PortP->InUse) {
-		if ( --PortP->InUse != NOT_INUSE ) {
+		if (--PortP->InUse != NOT_INUSE) {
 			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			return 0;
 		}
 	}
 	/*
-	** While PortP->InUse is set (i.e. a preemptive command has been sent to
-	** the RTA and is awaiting completion), any transmit data is prevented from
-	** being transferred from the write queue into the transmit packets
-	** (add_transmit) and no furthur transmit interrupt will be sent for that
-	** data. The next interrupt will occur up to 500ms later (RIOIntr is called
-	** twice a second as a saftey measure). This was the case when kermit was
-	** used to send data into a RIO port. After each packet was sent, TCFLSH
-	** was called to flush the read queue preemptively. PortP->InUse was
-	** incremented, thereby blocking the 6 byte acknowledgement packet
-	** transmitted back. This acknowledgment hung around for 500ms before
-	** being sent, thus reducing input performance substantially!.
-	** When PortP->InUse becomes NOT_INUSE, we must ensure that any data
-	** hanging around in the transmit buffer is sent immediately.
-	*/
+	 ** While PortP->InUse is set (i.e. a preemptive command has been sent to
+	 ** the RTA and is awaiting completion), any transmit data is prevented from
+	 ** being transferred from the write queue into the transmit packets
+	 ** (add_transmit) and no furthur transmit interrupt will be sent for that
+	 ** data. The next interrupt will occur up to 500ms later (RIOIntr is called
+	 ** twice a second as a saftey measure). This was the case when kermit was
+	 ** used to send data into a RIO port. After each packet was sent, TCFLSH
+	 ** was called to flush the read queue preemptively. PortP->InUse was
+	 ** incremented, thereby blocking the 6 byte acknowledgement packet
+	 ** transmitted back. This acknowledgment hung around for 500ms before
+	 ** being sent, thus reducing input performance substantially!.
+	 ** When PortP->InUse becomes NOT_INUSE, we must ensure that any data
+	 ** hanging around in the transmit buffer is sent immediately.
+	 */
 	WWORD(PortP->HostP->ParmMapP->tx_intr, 1);
 	/* What to do here ..
-	wakeup( (caddr_t)&(PortP->InUse) );
-	*/
+	   wakeup( (caddr_t)&(PortP->InUse) );
+	 */
 	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 	return 0;
 }
 
-void
-ShowPacket(uint Flags, struct PKT *PacketP)
+void ShowPacket(uint Flags, struct PKT *PacketP)
 {
 }
 

drivers/char/rio/riodrvr.h

@@ -33,7 +33,7 @@
 #ifndef __riodrvr_h
 #define __riodrvr_h
 
-#include <asm/param.h>	/* for HZ */
+#include <asm/param.h>		/* for HZ */
 
 #ifdef SCCS_LABELS
 static char *_riodrvr_h_sccs_ = "@(#)riodrvr.h	1.3";
@@ -44,15 +44,15 @@ static char *_riodrvr_h_sccs_ = "@(#)riodrvr.h	1.3";
 
 
 struct rio_info {
-	int			mode;			/* Intr or polled, word/byte */
-	spinlock_t		RIOIntrSem;		/* Interrupt thread sem */
-	int			current_chan;		/* current channel */
-	int			RIOFailed;		/* Not initialised ? */
-	int			RIOInstallAttempts;	/* no. of rio-install() calls */
-	int			RIOLastPCISearch;	/* status of last search */
-	int			RIONumHosts;		/* Number of RIO Hosts */
-	struct Host		* RIOHosts;		/* RIO Host values */
-	struct Port		**RIOPortp;		/* RIO port values */
+	int mode;		/* Intr or polled, word/byte */
+	spinlock_t RIOIntrSem;	/* Interrupt thread sem */
+	int current_chan;	/* current channel */
+	int RIOFailed;		/* Not initialised ? */
+	int RIOInstallAttempts;	/* no. of rio-install() calls */
+	int RIOLastPCISearch;	/* status of last search */
+	int RIONumHosts;	/* Number of RIO Hosts */
+	struct Host *RIOHosts;	/* RIO Host values */
+	struct Port **RIOPortp;	/* RIO port values */
 /*
 ** 02.03.1999 ARG - ESIL 0820 fix
 ** We no longer use RIOBootMode
@@ -60,9 +60,9 @@ struct rio_info {
 	int			RIOBootMode;		* RIO boot mode *
 **
 */
-	int			RIOPrintDisabled;	/* RIO printing disabled ? */
-	int			RIOPrintLogState;	/* RIO printing state ? */
-	int			RIOPolling;		/* Polling ? */
+	int RIOPrintDisabled;	/* RIO printing disabled ? */
+	int RIOPrintLogState;	/* RIO printing state ? */
+	int RIOPolling;		/* Polling ? */
 /*
 ** 09.12.1998 ARG - ESIL 0776 part fix
 ** The 'RIO_QUICK_CHECK' ioctl was using RIOHalted.
@@ -70,61 +70,61 @@ struct rio_info {
 ** updated in RIOConCon() - to keep track of RTA connections/disconnections.
 ** 'RIO_QUICK_CHECK' now returns the value of RIORtaDisCons.
 */
-	int			RIOHalted;		/* halted ? */
-	int			RIORtaDisCons;		/* RTA connections/disconnections */
-	uint			RIOReadCheck;		/* Rio read check */
-	uint			RIONoMessage;		/* To display message or not */
-	uint			RIONumBootPkts;		/* how many packets for an RTA */
-	uint			RIOBootCount; 		/* size of RTA code */
-	uint			RIOBooting;		/* count of outstanding boots */
-	uint			RIOSystemUp;		/* Booted ?? */
-	uint			RIOCounting;		/* for counting interrupts */
-	uint			RIOIntCount;		/* # of intr since last check */
-	uint			RIOTxCount;		/* number of xmit intrs  */
-	uint			RIORxCount;		/* number of rx intrs */
-	uint			RIORupCount;		/* number of rup intrs */
-	int			RIXTimer; 
-	int			RIOBufferSize;		/* Buffersize */
-	int			RIOBufferMask;		/* Buffersize */
-
-	int			RIOFirstMajor;		/* First host card's major no */
-
-	uint			RIOLastPortsMapped;	/* highest port number known */
-	uint			RIOFirstPortsMapped;	/* lowest port number known */
-
-	uint			RIOLastPortsBooted;	/* highest port number running */
-	uint			RIOFirstPortsBooted;	/* lowest port number running */
-
-	uint			RIOLastPortsOpened;	/* highest port number running */
-	uint			RIOFirstPortsOpened;	/* lowest port number running */
+	int RIOHalted;		/* halted ? */
+	int RIORtaDisCons;	/* RTA connections/disconnections */
+	uint RIOReadCheck;	/* Rio read check */
+	uint RIONoMessage;	/* To display message or not */
+	uint RIONumBootPkts;	/* how many packets for an RTA */
+	uint RIOBootCount;	/* size of RTA code */
+	uint RIOBooting;	/* count of outstanding boots */
+	uint RIOSystemUp;	/* Booted ?? */
+	uint RIOCounting;	/* for counting interrupts */
+	uint RIOIntCount;	/* # of intr since last check */
+	uint RIOTxCount;	/* number of xmit intrs  */
+	uint RIORxCount;	/* number of rx intrs */
+	uint RIORupCount;	/* number of rup intrs */
+	int RIXTimer;
+	int RIOBufferSize;	/* Buffersize */
+	int RIOBufferMask;	/* Buffersize */
+
+	int RIOFirstMajor;	/* First host card's major no */
+
+	uint RIOLastPortsMapped;	/* highest port number known */
+	uint RIOFirstPortsMapped;	/* lowest port number known */
+
+	uint RIOLastPortsBooted;	/* highest port number running */
+	uint RIOFirstPortsBooted;	/* lowest port number running */
+
+	uint RIOLastPortsOpened;	/* highest port number running */
+	uint RIOFirstPortsOpened;	/* lowest port number running */
 
 	/* Flag to say that the topology information has been changed. */
-	uint			RIOQuickCheck; 
-	uint			CdRegister;		/* ??? */
-	int			RIOSignalProcess;	/* Signalling process */
-	int			rio_debug;		/* To debug ... */
-	int			RIODebugWait;		/* For what ??? */
-	int			tpri;			/* Thread prio */
-	int			tid;			/* Thread id */
-	uint			_RIO_Polled;		/* Counter for polling */
-	uint			_RIO_Interrupted;	/* Counter for interrupt */
-	int			intr_tid;		/* iointset return value */
-	int			TxEnSem;		/* TxEnable Semaphore */
-
-
-	struct Error		RIOError;		/* to Identify what went wrong */ 
-	struct Conf		RIOConf;		/* Configuration ??? */
-	struct ttystatics	channel[RIO_PORTS];	/* channel information */
-	char			RIOBootPackets[1+(SIXTY_FOUR_K/RTA_BOOT_DATA_SIZE)]
-								[RTA_BOOT_DATA_SIZE];
-	struct Map		RIOConnectTable[TOTAL_MAP_ENTRIES];
-	struct Map		RIOSavedTable[TOTAL_MAP_ENTRIES];
+	uint RIOQuickCheck;
+	uint CdRegister;	/* ??? */
+	int RIOSignalProcess;	/* Signalling process */
+	int rio_debug;		/* To debug ... */
+	int RIODebugWait;	/* For what ??? */
+	int tpri;		/* Thread prio */
+	int tid;		/* Thread id */
+	uint _RIO_Polled;	/* Counter for polling */
+	uint _RIO_Interrupted;	/* Counter for interrupt */
+	int intr_tid;		/* iointset return value */
+	int TxEnSem;		/* TxEnable Semaphore */
+
+
+	struct Error RIOError;	/* to Identify what went wrong */
+	struct Conf RIOConf;	/* Configuration ??? */
+	struct ttystatics channel[RIO_PORTS];	/* channel information */
+	char RIOBootPackets[1 + (SIXTY_FOUR_K / RTA_BOOT_DATA_SIZE)]
+	    [RTA_BOOT_DATA_SIZE];
+	struct Map RIOConnectTable[TOTAL_MAP_ENTRIES];
+	struct Map RIOSavedTable[TOTAL_MAP_ENTRIES];
 
 	/* RTA to host binding table for master/slave operation */
-	ulong			RIOBindTab[MAX_RTA_BINDINGS];
+	ulong RIOBindTab[MAX_RTA_BINDINGS];
 	/* RTA memory dump variable */
-	uchar			RIOMemDump[MEMDUMP_SIZE]; 
-	struct ModuleInfo 	RIOModuleTypes[MAX_MODULE_TYPES];
+	uchar RIOMemDump[MEMDUMP_SIZE];
+	struct ModuleInfo RIOModuleTypes[MAX_MODULE_TYPES];
 
 };
 
@@ -141,4 +141,4 @@ struct rio_info {
 #define WRBYTE(x,y)		*(volatile unsigned char *)((x)) = \
 					(unsigned char)(y)
 
-#endif	/* __riodrvr.h */
+#endif				/* __riodrvr.h */

drivers/char/rio/rioinfo.h

@@ -41,29 +41,29 @@ static char *_rioinfo_h_sccs_ = "@(#)rioinfo.h	1.2";
 ** Host card data structure
 */
 struct RioHostInfo {
-	long	location;	/* RIO Card Base I/O address */
-	long	vector;		/* RIO Card IRQ vector */
-	int	bus;		/* ISA/EISA/MCA/PCI */
-	int	mode;		/* pointer to host mode - INTERRUPT / POLLED */
+	long location;		/* RIO Card Base I/O address */
+	long vector;		/* RIO Card IRQ vector */
+	int bus;		/* ISA/EISA/MCA/PCI */
+	int mode;		/* pointer to host mode - INTERRUPT / POLLED */
 	struct old_sgttyb
-		* Sg;		/* pointer to default term characteristics */
+	*Sg;			/* pointer to default term characteristics */
 };
 
 
 /* Mode in rio device info */
-#define INTERRUPTED_MODE	0x01		/* Interrupt is generated */
-#define POLLED_MODE		0x02		/* No interrupt */
-#define AUTO_MODE		0x03		/* Auto mode */
+#define INTERRUPTED_MODE	0x01	/* Interrupt is generated */
+#define POLLED_MODE		0x02	/* No interrupt */
+#define AUTO_MODE		0x03	/* Auto mode */
 
-#define WORD_ACCESS_MODE	0x10		/* Word Access Mode */
-#define BYTE_ACCESS_MODE	0x20		/* Byte Access Mode */
+#define WORD_ACCESS_MODE	0x10	/* Word Access Mode */
+#define BYTE_ACCESS_MODE	0x20	/* Byte Access Mode */
 
 
 /* Bus type that RIO supports */
-#define ISA_BUS			0x01		/* The card is ISA */
-#define EISA_BUS		0x02		/* The card is EISA */
-#define MCA_BUS			0x04		/* The card is MCA */
-#define PCI_BUS			0x08		/* The card is PCI */
+#define ISA_BUS			0x01	/* The card is ISA */
+#define EISA_BUS		0x02	/* The card is EISA */
+#define MCA_BUS			0x04	/* The card is MCA */
+#define PCI_BUS			0x08	/* The card is PCI */
 
 /*
 ** 11.11.1998 ARG - ESIL ???? part fix
@@ -93,4 +93,4 @@ struct RioHostInfo {
 	'V' - '@'				/* literal next char */ \
 }
 
-#endif /* __rioinfo_h */
+#endif				/* __rioinfo_h */

drivers/char/rio/rioioctl.h

@@ -42,14 +42,14 @@ static char *_rioioctl_h_sccs_ = "@(#)rioioctl.h	1.2";
 */
 
 struct portStats {
-	int	port;
-	int	gather;
-	ulong	txchars;
-	ulong	rxchars;
-	ulong	opens;
-	ulong	closes;
-	ulong	ioctls;
-}; 
+	int port;
+	int gather;
+	ulong txchars;
+	ulong rxchars;
+	ulong opens;
+	ulong closes;
+	ulong ioctls;
+};
 
 
 #define rIOC	('r'<<8)
@@ -100,4 +100,4 @@ struct portStats {
 #define RIO_RESET_PORT_STATS	(RIOC | 194)
 #define RIO_GET_PORT_STATS	(RIOC | 195)
 
-#endif	/* __rioioctl_h__ */
+#endif				/* __rioioctl_h__ */

drivers/char/rio/rioparam.c

@@ -157,46 +157,44 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c	1.3";
 ** NB. for MPX
 **	tty lock must NOT have been previously acquired.
 */
-int
-RIOParam(PortP, cmd, Modem, SleepFlag)
+int RIOParam(PortP, cmd, Modem, SleepFlag)
 struct Port *PortP;
 int cmd;
 int Modem;
-int SleepFlag; 
+int SleepFlag;
 {
 	register struct tty_struct *TtyP;
-	int	retval;
+	int retval;
 	register struct phb_param *phb_param_ptr;
 	PKT *PacketP;
 	int res;
-	uchar Cor1=0, Cor2=0, Cor4=0, Cor5=0;
-	uchar TxXon=0, TxXoff=0, RxXon=0, RxXoff=0;
-	uchar LNext=0, TxBaud=0, RxBaud=0;
-	int		retries = 0xff;
+	uchar Cor1 = 0, Cor2 = 0, Cor4 = 0, Cor5 = 0;
+	uchar TxXon = 0, TxXoff = 0, RxXon = 0, RxXoff = 0;
+	uchar LNext = 0, TxBaud = 0, RxBaud = 0;
+	int retries = 0xff;
 	unsigned long flags;
 
-	func_enter ();
+	func_enter();
 
 	TtyP = PortP->gs.tty;
 
-	rio_dprintk (RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n",
-	    PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);
+	rio_dprintk(RIO_DEBUG_PARAM, "RIOParam: Port:%d cmd:%d Modem:%d SleepFlag:%d Mapped: %d, tty=%p\n", PortP->PortNum, cmd, Modem, SleepFlag, PortP->Mapped, TtyP);
 
 	if (!TtyP) {
-	  rio_dprintk (RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n");
+		rio_dprintk(RIO_DEBUG_PARAM, "Can't call rioparam with null tty.\n");
 
-	  func_exit ();
+		func_exit();
 
-	  return RIO_FAIL;
+		return RIO_FAIL;
 	}
-	rio_spin_lock_irqsave(&PortP->portSem, flags );
+	rio_spin_lock_irqsave(&PortP->portSem, flags);
 
 	if (cmd == OPEN) {
 		/*
-		** If the port is set to store or lock the parameters, and it is
-		** paramed with OPEN, we want to restore the saved port termio, but
-		** only if StoredTermio has been saved, i.e. NOT 1st open after reboot.
-		*/
+		 ** If the port is set to store or lock the parameters, and it is
+		 ** paramed with OPEN, we want to restore the saved port termio, but
+		 ** only if StoredTermio has been saved, i.e. NOT 1st open after reboot.
+		 */
 #if 0
 		if (PortP->FirstOpen) {
 			PortP->StoredTty.iflag = TtyP->tm.c_iflag;
@@ -207,9 +205,8 @@ int SleepFlag;
 			for (i = 0; i < NCC + 5; i++)
 				PortP->StoredTty.cc[i] = TtyP->tm.c_cc[i];
 			PortP->FirstOpen = 0;
-		}
-		else if (PortP->Store || PortP->Lock) {
-			rio_dprintk (RIO_DEBUG_PARAM, "OPEN: Restoring stored/locked params\n");
+		} else if (PortP->Store || PortP->Lock) {
+			rio_dprintk(RIO_DEBUG_PARAM, "OPEN: Restoring stored/locked params\n");
 			TtyP->tm.c_iflag = PortP->StoredTty.iflag;
 			TtyP->tm.c_oflag = PortP->StoredTty.oflag;
 			TtyP->tm.c_cflag = PortP->StoredTty.cflag;
@@ -222,230 +219,222 @@ int SleepFlag;
 	}
 
 	/*
-	** wait for space
-	*/
-	while ( !(res=can_add_transmit(&PacketP,PortP)) || 
-			(PortP->InUse != NOT_INUSE) ) {
-		if (retries -- <= 0) {
+	 ** wait for space
+	 */
+	while (!(res = can_add_transmit(&PacketP, PortP)) || (PortP->InUse != NOT_INUSE)) {
+		if (retries-- <= 0) {
 			break;
 		}
-		if ( PortP->InUse != NOT_INUSE ) {
-			rio_dprintk (RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n");
+		if (PortP->InUse != NOT_INUSE) {
+			rio_dprintk(RIO_DEBUG_PARAM, "Port IN_USE for pre-emptive command\n");
 		}
 
-		if ( !res ) {
-			rio_dprintk (RIO_DEBUG_PARAM, "Port has no space on transmit queue\n");
+		if (!res) {
+			rio_dprintk(RIO_DEBUG_PARAM, "Port has no space on transmit queue\n");
 		}
 
-		if ( SleepFlag != OK_TO_SLEEP ) {
-			rio_spin_unlock_irqrestore( &PortP->portSem, flags);
+		if (SleepFlag != OK_TO_SLEEP) {
+			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			func_exit();
-			
+
 			return RIO_FAIL;
 		}
 
-		rio_dprintk (RIO_DEBUG_PARAM, "wait for can_add_transmit\n");
-		rio_spin_unlock_irqrestore( &PortP->portSem, flags);
+		rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit\n");
+		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 		retval = RIODelay(PortP, HUNDRED_MS);
-		rio_spin_lock_irqsave( &PortP->portSem, flags);
+		rio_spin_lock_irqsave(&PortP->portSem, flags);
 		if (retval == RIO_FAIL) {
-			rio_dprintk (RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n");
-			rio_spin_unlock_irqrestore( &PortP->portSem, flags);
+			rio_dprintk(RIO_DEBUG_PARAM, "wait for can_add_transmit broken by signal\n");
+			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 			pseterr(EINTR);
 			func_exit();
 
 			return RIO_FAIL;
 		}
-		if ( PortP->State & RIO_DELETED ) {
-			rio_spin_unlock_irqrestore( &PortP->portSem, flags);
-			func_exit ();
+		if (PortP->State & RIO_DELETED) {
+			rio_spin_unlock_irqrestore(&PortP->portSem, flags);
+			func_exit();
 
 			return RIO_SUCCESS;
 		}
 	}
 
 	if (!res) {
-		rio_spin_unlock_irqrestore( &PortP->portSem, flags);
-		func_exit ();
+		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
+		func_exit();
 
 		return RIO_FAIL;
 	}
 
-	rio_dprintk (RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n",res);
-	rio_dprintk (RIO_DEBUG_PARAM, "Packet is 0x%x\n",(int) PacketP);
+	rio_dprintk(RIO_DEBUG_PARAM, "can_add_transmit() returns %x\n", res);
+	rio_dprintk(RIO_DEBUG_PARAM, "Packet is 0x%x\n", (int) PacketP);
 
-	phb_param_ptr = (struct phb_param *)PacketP->data;
+	phb_param_ptr = (struct phb_param *) PacketP->data;
 
 
 #if 0
 	/*
-	** COR 1
-	*/
-	if ( TtyP->tm.c_iflag & INPCK ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Parity checking on input enabled\n");
+	 ** COR 1
+	 */
+	if (TtyP->tm.c_iflag & INPCK) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Parity checking on input enabled\n");
 		Cor1 |= COR1_INPCK;
 	}
 #endif
 
-	switch ( TtyP->termios->c_cflag & CSIZE ) {
-		case CS5:
+	switch (TtyP->termios->c_cflag & CSIZE) {
+	case CS5:
 		{
-			rio_dprintk (RIO_DEBUG_PARAM, "5 bit data\n");
+			rio_dprintk(RIO_DEBUG_PARAM, "5 bit data\n");
 			Cor1 |= COR1_5BITS;
 			break;
 		}
-		case CS6:
+	case CS6:
 		{
-			rio_dprintk (RIO_DEBUG_PARAM, "6 bit data\n");
+			rio_dprintk(RIO_DEBUG_PARAM, "6 bit data\n");
 			Cor1 |= COR1_6BITS;
 			break;
 		}
-		case CS7:
+	case CS7:
 		{
-			rio_dprintk (RIO_DEBUG_PARAM, "7 bit data\n");
+			rio_dprintk(RIO_DEBUG_PARAM, "7 bit data\n");
 			Cor1 |= COR1_7BITS;
 			break;
 		}
-		case CS8:
+	case CS8:
 		{
-			rio_dprintk (RIO_DEBUG_PARAM, "8 bit data\n");
+			rio_dprintk(RIO_DEBUG_PARAM, "8 bit data\n");
 			Cor1 |= COR1_8BITS;
 			break;
 		}
 	}
 
-	if ( TtyP->termios->c_cflag & CSTOPB ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "2 stop bits\n");
+	if (TtyP->termios->c_cflag & CSTOPB) {
+		rio_dprintk(RIO_DEBUG_PARAM, "2 stop bits\n");
 		Cor1 |= COR1_2STOP;
-	}
-	else {
-		rio_dprintk (RIO_DEBUG_PARAM, "1 stop bit\n");
+	} else {
+		rio_dprintk(RIO_DEBUG_PARAM, "1 stop bit\n");
 		Cor1 |= COR1_1STOP;
 	}
 
-	if ( TtyP->termios->c_cflag & PARENB ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable parity\n");
+	if (TtyP->termios->c_cflag & PARENB) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable parity\n");
 		Cor1 |= COR1_NORMAL;
-	}
-	else {
-		rio_dprintk (RIO_DEBUG_PARAM, "Disable parity\n");
+	} else {
+		rio_dprintk(RIO_DEBUG_PARAM, "Disable parity\n");
 		Cor1 |= COR1_NOP;
 	}
-	if ( TtyP->termios->c_cflag & PARODD ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Odd parity\n");
+	if (TtyP->termios->c_cflag & PARODD) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Odd parity\n");
 		Cor1 |= COR1_ODD;
-	}
-	else {
-		rio_dprintk (RIO_DEBUG_PARAM, "Even parity\n");
-		Cor1 |= COR1_EVEN; 
+	} else {
+		rio_dprintk(RIO_DEBUG_PARAM, "Even parity\n");
+		Cor1 |= COR1_EVEN;
 	}
 
 	/*
-	** COR 2
-	*/
-	if ( TtyP->termios->c_iflag & IXON ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable start/stop output control\n");
+	 ** COR 2
+	 */
+	if (TtyP->termios->c_iflag & IXON) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop output control\n");
 		Cor2 |= COR2_IXON;
-	}
-	else {
-		if ( PortP->Config & RIO_IXON ) {
-			rio_dprintk (RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
+	} else {
+		if (PortP->Config & RIO_IXON) {
+			rio_dprintk(RIO_DEBUG_PARAM, "Force enable start/stop output control\n");
 			Cor2 |= COR2_IXON;
-		}
-		else
-			rio_dprintk (RIO_DEBUG_PARAM, "IXON has been disabled.\n");
+		} else
+			rio_dprintk(RIO_DEBUG_PARAM, "IXON has been disabled.\n");
 	}
 
 	if (TtyP->termios->c_iflag & IXANY) {
-		if ( PortP->Config & RIO_IXANY ) {
-			rio_dprintk (RIO_DEBUG_PARAM, "Enable any key to restart output\n");
+		if (PortP->Config & RIO_IXANY) {
+			rio_dprintk(RIO_DEBUG_PARAM, "Enable any key to restart output\n");
 			Cor2 |= COR2_IXANY;
-		}
-		else
-			rio_dprintk (RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
+		} else
+			rio_dprintk(RIO_DEBUG_PARAM, "IXANY has been disabled due to sanity reasons.\n");
 	}
 
-	if ( TtyP->termios->c_iflag & IXOFF ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
+	if (TtyP->termios->c_iflag & IXOFF) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable start/stop input control 2\n");
 		Cor2 |= COR2_IXOFF;
 	}
 
-	if ( TtyP->termios->c_cflag & HUPCL ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Hangup on last close\n");
+	if (TtyP->termios->c_cflag & HUPCL) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Hangup on last close\n");
 		Cor2 |= COR2_HUPCL;
 	}
 
-	if ( C_CRTSCTS (TtyP)) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
+	if (C_CRTSCTS(TtyP)) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control enabled\n");
 		Cor2 |= COR2_CTSFLOW;
 		Cor2 |= COR2_RTSFLOW;
 	} else {
-		rio_dprintk (RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
+		rio_dprintk(RIO_DEBUG_PARAM, "Rx hardware flow control disabled\n");
 		Cor2 &= ~COR2_CTSFLOW;
 		Cor2 &= ~COR2_RTSFLOW;
 	}
 
 
-	if ( TtyP->termios->c_cflag & CLOCAL ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Local line\n");
-	}
-	else {
-		rio_dprintk (RIO_DEBUG_PARAM, "Possible Modem line\n");
+	if (TtyP->termios->c_cflag & CLOCAL) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Local line\n");
+	} else {
+		rio_dprintk(RIO_DEBUG_PARAM, "Possible Modem line\n");
 	}
 
 	/*
-	** COR 4 (there is no COR 3)
-	*/
-	if ( TtyP->termios->c_iflag & IGNBRK ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Ignore break condition\n");
+	 ** COR 4 (there is no COR 3)
+	 */
+	if (TtyP->termios->c_iflag & IGNBRK) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Ignore break condition\n");
 		Cor4 |= COR4_IGNBRK;
 	}
-	if ( !(TtyP->termios->c_iflag & BRKINT) ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Break generates NULL condition\n");
+	if (!(TtyP->termios->c_iflag & BRKINT)) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Break generates NULL condition\n");
 		Cor4 |= COR4_NBRKINT;
 	} else {
-		rio_dprintk (RIO_DEBUG_PARAM, "Interrupt on	break condition\n");
+		rio_dprintk(RIO_DEBUG_PARAM, "Interrupt on	break condition\n");
 	}
 
-	if ( TtyP->termios->c_iflag & INLCR ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
+	if (TtyP->termios->c_iflag & INLCR) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage return on input\n");
 		Cor4 |= COR4_INLCR;
 	}
 
-	if ( TtyP->termios->c_iflag & IGNCR ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
+	if (TtyP->termios->c_iflag & IGNCR) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Ignore carriage return on input\n");
 		Cor4 |= COR4_IGNCR;
 	}
 
-	if ( TtyP->termios->c_iflag & ICRNL ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
+	if (TtyP->termios->c_iflag & ICRNL) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on input\n");
 		Cor4 |= COR4_ICRNL;
 	}
-	if ( TtyP->termios->c_iflag & IGNPAR ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
+	if (TtyP->termios->c_iflag & IGNPAR) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Ignore characters with parity errors\n");
 		Cor4 |= COR4_IGNPAR;
 	}
-	if ( TtyP->termios->c_iflag & PARMRK ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Mark parity errors\n");
+	if (TtyP->termios->c_iflag & PARMRK) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Mark parity errors\n");
 		Cor4 |= COR4_PARMRK;
 	}
 
 	/*
-	** Set the RAISEMOD flag to ensure that the modem lines are raised
-	** on reception of a config packet.
-	** The download code handles the zero baud condition.
-	*/
+	 ** Set the RAISEMOD flag to ensure that the modem lines are raised
+	 ** on reception of a config packet.
+	 ** The download code handles the zero baud condition.
+	 */
 	Cor4 |= COR4_RAISEMOD;
 
 	/*
-	** COR 5
-	*/
+	 ** COR 5
+	 */
 
 	Cor5 = COR5_CMOE;
 
 	/*
-	** Set to monitor tbusy/tstop (or not).
-	*/
+	 ** Set to monitor tbusy/tstop (or not).
+	 */
 
 	if (PortP->MonitorTstate)
 		Cor5 |= COR5_TSTATE_ON;
@@ -453,182 +442,195 @@ int SleepFlag;
 		Cor5 |= COR5_TSTATE_OFF;
 
 	/*
-	** Could set LNE here if you wanted LNext processing. SVR4 will use it.
-	*/
-	if ( TtyP->termios->c_iflag & ISTRIP ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Strip input characters\n");
-		if (! (PortP->State & RIO_TRIAD_MODE)) {
+	 ** Could set LNE here if you wanted LNext processing. SVR4 will use it.
+	 */
+	if (TtyP->termios->c_iflag & ISTRIP) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Strip input characters\n");
+		if (!(PortP->State & RIO_TRIAD_MODE)) {
 			Cor5 |= COR5_ISTRIP;
 		}
 	}
 
-	if ( TtyP->termios->c_oflag & ONLCR ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
-		if ( PortP->CookMode == COOK_MEDIUM )
+	if (TtyP->termios->c_oflag & ONLCR) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Map newline to carriage-return, newline on output\n");
+		if (PortP->CookMode == COOK_MEDIUM)
 			Cor5 |= COR5_ONLCR;
 	}
-	if ( TtyP->termios->c_oflag & OCRNL ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
-		if ( PortP->CookMode == COOK_MEDIUM )
+	if (TtyP->termios->c_oflag & OCRNL) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Map carriage return to newline on output\n");
+		if (PortP->CookMode == COOK_MEDIUM)
 			Cor5 |= COR5_OCRNL;
 	}
-	if ( ( TtyP->termios->c_oflag & TABDLY) == TAB3 ) {
-		rio_dprintk (RIO_DEBUG_PARAM, "Tab delay 3 set\n");
-		if ( PortP->CookMode == COOK_MEDIUM )
+	if ((TtyP->termios->c_oflag & TABDLY) == TAB3) {
+		rio_dprintk(RIO_DEBUG_PARAM, "Tab delay 3 set\n");
+		if (PortP->CookMode == COOK_MEDIUM)
 			Cor5 |= COR5_TAB3;
 	}
 
 	/*
-	** Flow control bytes.
-	*/
+	 ** Flow control bytes.
+	 */
 	TxXon = TtyP->termios->c_cc[VSTART];
 	TxXoff = TtyP->termios->c_cc[VSTOP];
 	RxXon = TtyP->termios->c_cc[VSTART];
 	RxXoff = TtyP->termios->c_cc[VSTOP];
 	/*
-	** LNEXT byte
-	*/
+	 ** LNEXT byte
+	 */
 	LNext = 0;
 
 	/*
-	** Baud rate bytes
-	*/
-	rio_dprintk (RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", 
-				     TtyP->termios->c_cflag, CBAUD);
+	 ** Baud rate bytes
+	 */
+	rio_dprintk(RIO_DEBUG_PARAM, "Mapping of rx/tx baud %x (%x)\n", TtyP->termios->c_cflag, CBAUD);
 
 	switch (TtyP->termios->c_cflag & CBAUD) {
 #define e(b) case B ## b : RxBaud = TxBaud = RIO_B ## b ;break
-	  e(50);e(75);e(110);e(134);e(150);e(200);e(300);e(600);e(1200);
-	  e(1800);e(2400);e(4800);e(9600);e(19200);e(38400);e(57600);
-	  e(115200); /* e(230400);e(460800); e(921600);  */
+		e(50);
+		e(75);
+		e(110);
+		e(134);
+		e(150);
+		e(200);
+		e(300);
+		e(600);
+		e(1200);
+		e(1800);
+		e(2400);
+		e(4800);
+		e(9600);
+		e(19200);
+		e(38400);
+		e(57600);
+		e(115200);	/* e(230400);e(460800); e(921600);  */
 	}
 
 	/* XXX MIssing conversion table. XXX */
-	/* 	 (TtyP->termios->c_cflag & V_CBAUD); */
+	/*       (TtyP->termios->c_cflag & V_CBAUD); */
 
-	rio_dprintk (RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud);
+	rio_dprintk(RIO_DEBUG_PARAM, "tx baud 0x%x, rx baud 0x%x\n", TxBaud, RxBaud);
 
 
 	/*
-	** Leftovers
-	*/
-	if ( TtyP->termios->c_cflag & CREAD )
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable receiver\n");
+	 ** Leftovers
+	 */
+	if (TtyP->termios->c_cflag & CREAD)
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable receiver\n");
 #ifdef RCV1EN
-	if ( TtyP->termios->c_cflag & RCV1EN )
-		rio_dprintk (RIO_DEBUG_PARAM, "RCV1EN (?)\n");
+	if (TtyP->termios->c_cflag & RCV1EN)
+		rio_dprintk(RIO_DEBUG_PARAM, "RCV1EN (?)\n");
 #endif
 #ifdef XMT1EN
-	if ( TtyP->termios->c_cflag & XMT1EN )
-		rio_dprintk (RIO_DEBUG_PARAM, "XMT1EN (?)\n");
+	if (TtyP->termios->c_cflag & XMT1EN)
+		rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n");
 #endif
 #if 0
-	if ( TtyP->termios->c_cflag & LOBLK )
-		rio_dprintk (RIO_DEBUG_PARAM, "LOBLK - JCL output blocks when not current\n");
+	if (TtyP->termios->c_cflag & LOBLK)
+		rio_dprintk(RIO_DEBUG_PARAM, "LOBLK - JCL output blocks when not current\n");
 #endif
-	if ( TtyP->termios->c_lflag & ISIG )
-		rio_dprintk (RIO_DEBUG_PARAM, "Input character signal generating enabled\n");
-	if ( TtyP->termios->c_lflag & ICANON )
-		rio_dprintk (RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n");
-	if ( TtyP->termios->c_lflag & XCASE )
-		rio_dprintk (RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n");
-	if ( TtyP->termios->c_lflag & ECHO )
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable input echo\n");
-	if ( TtyP->termios->c_lflag & ECHOE )
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable echo erase\n");
-	if ( TtyP->termios->c_lflag & ECHOK )
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable echo kill\n");
-	if ( TtyP->termios->c_lflag & ECHONL )
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable echo newline\n");
-	if ( TtyP->termios->c_lflag & NOFLSH )
-		rio_dprintk (RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n");
+	if (TtyP->termios->c_lflag & ISIG)
+		rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n");
+	if (TtyP->termios->c_lflag & ICANON)
+		rio_dprintk(RIO_DEBUG_PARAM, "Canonical input: erase and kill enabled\n");
+	if (TtyP->termios->c_lflag & XCASE)
+		rio_dprintk(RIO_DEBUG_PARAM, "Canonical upper/lower presentation\n");
+	if (TtyP->termios->c_lflag & ECHO)
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable input echo\n");
+	if (TtyP->termios->c_lflag & ECHOE)
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable echo erase\n");
+	if (TtyP->termios->c_lflag & ECHOK)
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable echo kill\n");
+	if (TtyP->termios->c_lflag & ECHONL)
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable echo newline\n");
+	if (TtyP->termios->c_lflag & NOFLSH)
+		rio_dprintk(RIO_DEBUG_PARAM, "Disable flush after interrupt or quit\n");
 #ifdef TOSTOP
-	if ( TtyP->termios->c_lflag & TOSTOP )
-		rio_dprintk (RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n");
+	if (TtyP->termios->c_lflag & TOSTOP)
+		rio_dprintk(RIO_DEBUG_PARAM, "Send SIGTTOU for background output\n");
 #endif
 #ifdef XCLUDE
-	if ( TtyP->termios->c_lflag & XCLUDE )
-		rio_dprintk (RIO_DEBUG_PARAM, "Exclusive use of this line\n");
+	if (TtyP->termios->c_lflag & XCLUDE)
+		rio_dprintk(RIO_DEBUG_PARAM, "Exclusive use of this line\n");
 #endif
-	if ( TtyP->termios->c_iflag & IUCLC )
-		rio_dprintk (RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n");
-	if ( TtyP->termios->c_oflag & OPOST )
-		rio_dprintk (RIO_DEBUG_PARAM, "Enable output post-processing\n");
-	if ( TtyP->termios->c_oflag & OLCUC )
-		rio_dprintk (RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n");
-	if ( TtyP->termios->c_oflag & ONOCR )
-		rio_dprintk (RIO_DEBUG_PARAM, "No carriage return output at column 0\n");
-	if ( TtyP->termios->c_oflag & ONLRET )
-		rio_dprintk (RIO_DEBUG_PARAM, "Newline performs carriage return function\n");
-	if ( TtyP->termios->c_oflag & OFILL )
-		rio_dprintk (RIO_DEBUG_PARAM, "Use fill characters for delay\n");
-	if ( TtyP->termios->c_oflag & OFDEL )
-		rio_dprintk (RIO_DEBUG_PARAM, "Fill character is DEL\n");
-	if ( TtyP->termios->c_oflag & NLDLY )
-		rio_dprintk (RIO_DEBUG_PARAM, "Newline delay set\n");
-	if ( TtyP->termios->c_oflag & CRDLY )
-		rio_dprintk (RIO_DEBUG_PARAM, "Carriage return delay set\n");
-	if ( TtyP->termios->c_oflag & TABDLY )
-		rio_dprintk (RIO_DEBUG_PARAM, "Tab delay set\n");
+	if (TtyP->termios->c_iflag & IUCLC)
+		rio_dprintk(RIO_DEBUG_PARAM, "Map uppercase to lowercase on input\n");
+	if (TtyP->termios->c_oflag & OPOST)
+		rio_dprintk(RIO_DEBUG_PARAM, "Enable output post-processing\n");
+	if (TtyP->termios->c_oflag & OLCUC)
+		rio_dprintk(RIO_DEBUG_PARAM, "Map lowercase to uppercase on output\n");
+	if (TtyP->termios->c_oflag & ONOCR)
+		rio_dprintk(RIO_DEBUG_PARAM, "No carriage return output at column 0\n");
+	if (TtyP->termios->c_oflag & ONLRET)
+		rio_dprintk(RIO_DEBUG_PARAM, "Newline performs carriage return function\n");
+	if (TtyP->termios->c_oflag & OFILL)
+		rio_dprintk(RIO_DEBUG_PARAM, "Use fill characters for delay\n");
+	if (TtyP->termios->c_oflag & OFDEL)
+		rio_dprintk(RIO_DEBUG_PARAM, "Fill character is DEL\n");
+	if (TtyP->termios->c_oflag & NLDLY)
+		rio_dprintk(RIO_DEBUG_PARAM, "Newline delay set\n");
+	if (TtyP->termios->c_oflag & CRDLY)
+		rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n");
+	if (TtyP->termios->c_oflag & TABDLY)
+		rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n");
 #if 0
-	if ( TtyP->termios->c_oflag & BSDLY )
-		rio_dprintk (RIO_DEBUG_PARAM, "Back-space delay set\n");
-	if ( TtyP->termios->c_oflag & VTDLY )
-		rio_dprintk (RIO_DEBUG_PARAM, "Vertical tab delay set\n");
-	if ( TtyP->termios->c_oflag & FFDLY )
-		rio_dprintk (RIO_DEBUG_PARAM, "Form-feed delay set\n");
+	if (TtyP->termios->c_oflag & BSDLY)
+		rio_dprintk(RIO_DEBUG_PARAM, "Back-space delay set\n");
+	if (TtyP->termios->c_oflag & VTDLY)
+		rio_dprintk(RIO_DEBUG_PARAM, "Vertical tab delay set\n");
+	if (TtyP->termios->c_oflag & FFDLY)
+		rio_dprintk(RIO_DEBUG_PARAM, "Form-feed delay set\n");
 #endif
 	/*
-	** These things are kind of useful in a later life!
-	*/
+	 ** These things are kind of useful in a later life!
+	 */
 	PortP->Cor2Copy = Cor2;
 
-	if ( PortP->State & RIO_DELETED ) {
-		rio_spin_unlock_irqrestore( &PortP->portSem, flags);
-		func_exit ();
+	if (PortP->State & RIO_DELETED) {
+		rio_spin_unlock_irqrestore(&PortP->portSem, flags);
+		func_exit();
 
 		return RIO_FAIL;
 	}
 
 	/*
-	** Actually write the info into the packet to be sent
-	*/
-	WBYTE(phb_param_ptr->Cmd,	cmd);
-	WBYTE(phb_param_ptr->Cor1,	 Cor1);
-	WBYTE(phb_param_ptr->Cor2,	 Cor2);
-	WBYTE(phb_param_ptr->Cor4,	 Cor4);
-	WBYTE(phb_param_ptr->Cor5,	 Cor5);
-	WBYTE(phb_param_ptr->TxXon,	TxXon);
-	WBYTE(phb_param_ptr->RxXon,	RxXon);
+	 ** Actually write the info into the packet to be sent
+	 */
+	WBYTE(phb_param_ptr->Cmd, cmd);
+	WBYTE(phb_param_ptr->Cor1, Cor1);
+	WBYTE(phb_param_ptr->Cor2, Cor2);
+	WBYTE(phb_param_ptr->Cor4, Cor4);
+	WBYTE(phb_param_ptr->Cor5, Cor5);
+	WBYTE(phb_param_ptr->TxXon, TxXon);
+	WBYTE(phb_param_ptr->RxXon, RxXon);
 	WBYTE(phb_param_ptr->TxXoff, TxXoff);
 	WBYTE(phb_param_ptr->RxXoff, RxXoff);
-	WBYTE(phb_param_ptr->LNext,	LNext);
+	WBYTE(phb_param_ptr->LNext, LNext);
 	WBYTE(phb_param_ptr->TxBaud, TxBaud);
 	WBYTE(phb_param_ptr->RxBaud, RxBaud);
 
 	/*
-	** Set the length/command field
-	*/
-	WBYTE(PacketP->len , 12 | PKT_CMD_BIT);
+	 ** Set the length/command field
+	 */
+	WBYTE(PacketP->len, 12 | PKT_CMD_BIT);
 
 	/*
-	** The packet is formed - now, whack it off
-	** to its final destination:
-	*/
+	 ** The packet is formed - now, whack it off
+	 ** to its final destination:
+	 */
 	add_transmit(PortP);
 	/*
-	** Count characters transmitted for port statistics reporting
-	*/
+	 ** Count characters transmitted for port statistics reporting
+	 */
 	if (PortP->statsGather)
 		PortP->txchars += 12;
 
-	rio_spin_unlock_irqrestore( &PortP->portSem, flags);
+	rio_spin_unlock_irqrestore(&PortP->portSem, flags);
 
-	rio_dprintk (RIO_DEBUG_PARAM, "add_transmit returned.\n");
+	rio_dprintk(RIO_DEBUG_PARAM, "add_transmit returned.\n");
 	/*
-	** job done.
-	*/
-	func_exit ();
+	 ** job done.
+	 */
+	func_exit();
 
 	return RIO_SUCCESS;
 }
@@ -638,16 +640,15 @@ int SleepFlag;
 ** We can add another packet to a transmit queue if the packet pointer pointed
 ** to by the TxAdd pointer has PKT_IN_USE clear in its address.
 */
-int
-can_add_transmit(PktP, PortP)
+int can_add_transmit(PktP, PortP)
 PKT **PktP;
-struct Port *PortP; 
+struct Port *PortP;
 {
 	register PKT *tp;
 
-	*PktP = tp = (PKT *)RIO_PTR(PortP->Caddr,RWORD(*PortP->TxAdd));
+	*PktP = tp = (PKT *) RIO_PTR(PortP->Caddr, RWORD(*PortP->TxAdd));
 
-	return !((uint)tp & PKT_IN_USE);
+	return !((uint) tp & PKT_IN_USE);
 }
 
 /*
@@ -655,25 +656,22 @@ struct Port *PortP;
 ** and then move the TxAdd pointer along one position to point to the next
 ** packet pointer. You must wrap the pointer from the end back to the start.
 */
-void
-add_transmit(PortP)
-struct Port *PortP; 
+void add_transmit(PortP)
+struct Port *PortP;
 {
-  if (RWORD(*PortP->TxAdd) & PKT_IN_USE) {
-    rio_dprintk (RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!");
-  }
-	WWORD( *(ushort *)PortP->TxAdd, RWORD(*PortP->TxAdd) | PKT_IN_USE);
-	PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : 
-					PortP->TxAdd + 1;
-	WWORD( PortP->PhbP->tx_add , RIO_OFF(PortP->Caddr,PortP->TxAdd) );
+	if (RWORD(*PortP->TxAdd) & PKT_IN_USE) {
+		rio_dprintk(RIO_DEBUG_PARAM, "add_transmit: Packet has been stolen!");
+	}
+	WWORD(*(ushort *) PortP->TxAdd, RWORD(*PortP->TxAdd) | PKT_IN_USE);
+	PortP->TxAdd = (PortP->TxAdd == PortP->TxEnd) ? PortP->TxStart : PortP->TxAdd + 1;
+	WWORD(PortP->PhbP->tx_add, RIO_OFF(PortP->Caddr, PortP->TxAdd));
 }
 
 /****************************************
  * Put a packet onto the end of the
  * free list
  ****************************************/
-void
-put_free_end(HostP, PktP)
+void put_free_end(HostP, PktP)
 struct Host *HostP;
 PKT *PktP;
 {
@@ -688,24 +686,23 @@ PKT *PktP;
 	*
 	************************************************/
 
-	rio_dprintk (RIO_DEBUG_PFE,  "put_free_end(PktP=%x)\n",(int)PktP);
+	rio_dprintk(RIO_DEBUG_PFE, "put_free_end(PktP=%x)\n", (int) PktP);
 
-	if ((old_end=RWORD(HostP->ParmMapP->free_list_end)) != TPNULL) {
-		new_end = RIO_OFF(HostP->Caddr,PktP);
-		tmp_pointer = (FREE_LIST *)RIO_PTR(HostP->Caddr,old_end);
-		WWORD(tmp_pointer->next , new_end );
-		WWORD(((FREE_LIST *)PktP)->prev , old_end);
-		WWORD(((FREE_LIST *)PktP)->next , TPNULL);
+	if ((old_end = RWORD(HostP->ParmMapP->free_list_end)) != TPNULL) {
+		new_end = RIO_OFF(HostP->Caddr, PktP);
+		tmp_pointer = (FREE_LIST *) RIO_PTR(HostP->Caddr, old_end);
+		WWORD(tmp_pointer->next, new_end);
+		WWORD(((FREE_LIST *) PktP)->prev, old_end);
+		WWORD(((FREE_LIST *) PktP)->next, TPNULL);
 		WWORD(HostP->ParmMapP->free_list_end, new_end);
-	}
-	else {	/* First packet on the free list this should never happen! */
-		rio_dprintk (RIO_DEBUG_PFE, "put_free_end(): This should never happen\n");
-		WWORD(HostP->ParmMapP->free_list_end , RIO_OFF(HostP->Caddr,PktP));
-		tmp_pointer = (FREE_LIST *)PktP;
-		WWORD(tmp_pointer->prev , TPNULL);
-		WWORD(tmp_pointer->next , TPNULL);
-	}
-	rio_dprintk (RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock);
+	} else {		/* First packet on the free list this should never happen! */
+		rio_dprintk(RIO_DEBUG_PFE, "put_free_end(): This should never happen\n");
+		WWORD(HostP->ParmMapP->free_list_end, RIO_OFF(HostP->Caddr, PktP));
+		tmp_pointer = (FREE_LIST *) PktP;
+		WWORD(tmp_pointer->prev, TPNULL);
+		WWORD(tmp_pointer->next, TPNULL);
+	}
+	rio_dprintk(RIO_DEBUG_CMD, "Before unlock: %p\n", &HostP->HostLock);
 	rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
 }
 
@@ -715,14 +712,12 @@ PKT *PktP;
 ** relevant packet, [having cleared the PKT_IN_USE bit]. If PKT_IN_USE is clear,
 ** then can_remove_receive() returns 0.
 */
-int
-can_remove_receive(PktP, PortP)
+int can_remove_receive(PktP, PortP)
 PKT **PktP;
 struct Port *PortP;
 {
-	if ( RWORD(*PortP->RxRemove) & PKT_IN_USE) {
-		*PktP = (PKT *)RIO_PTR(PortP->Caddr,
-					RWORD(*PortP->RxRemove) & ~PKT_IN_USE);
+	if (RWORD(*PortP->RxRemove) & PKT_IN_USE) {
+		*PktP = (PKT *) RIO_PTR(PortP->Caddr, RWORD(*PortP->RxRemove) & ~PKT_IN_USE);
 		return 1;
 	}
 	return 0;
@@ -733,12 +728,10 @@ struct Port *PortP;
 ** and then bump the pointers. Once the pointers get to the end, they must
 ** be wrapped back to the start.
 */
-void
-remove_receive(PortP)
-struct Port *PortP; 
+void remove_receive(PortP)
+struct Port *PortP;
 {
-	WWORD( *PortP->RxRemove, RWORD(*PortP->RxRemove) & ~PKT_IN_USE );
-	PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : 
-								PortP->RxRemove + 1;
-	WWORD( PortP->PhbP->rx_remove , RIO_OFF(PortP->Caddr, PortP->RxRemove) );
+	WWORD(*PortP->RxRemove, RWORD(*PortP->RxRemove) & ~PKT_IN_USE);
+	PortP->RxRemove = (PortP->RxRemove == PortP->RxEnd) ? PortP->RxStart : PortP->RxRemove + 1;
+	WWORD(PortP->PhbP->rx_remove, RIO_OFF(PortP->Caddr, PortP->RxRemove));
 }

drivers/char/rio/riopcicopy.c

@@ -1,8 +1,8 @@
 
 /* Yeah. We have copyright on this one. Sure. */
 
-void rio_pcicopy( char *from, char *to, int amount)
+void rio_pcicopy(char *from, char *to, int amount)
 {
-  while ( amount-- )
-    *to++ = *from++;
+	while (amount--)
+		*to++ = *from++;
 }

drivers/char/rio/riospace.h

@@ -47,9 +47,8 @@ static char *_riospace_h_sccs_ = "@(#)riospace.h	1.2";
 ** In particular, it won't be able to see changes to RIO_SLOTS
 */
 
-struct Conf
-{
-	char         Locator[24];
+struct Conf {
+	char Locator[24];
 	unsigned int StartupTime;
 	unsigned int SlowCook;
 	unsigned int IntrPollTime;
@@ -59,8 +58,8 @@ struct Conf
 	unsigned int HostLoadBase;
 	unsigned int XpHz;
 	unsigned int XpCps;
-	char         *XpOn;
-	char         *XpOff;
+	char *XpOn;
+	char *XpOff;
 	unsigned int MaxXpCps;
 	unsigned int MinXpCps;
 	unsigned int SpinCmds;
@@ -74,7 +73,7 @@ struct Conf
 
 /*
 **	Board types - these MUST correspond to product codes!
-*/ 
+*/
 #define	RIO_EMPTY	0x0
 #define	RIO_EISA	0x3
 #define	RIO_RTA_16	0x9
@@ -86,18 +85,16 @@ struct Conf
 /*
 **	Board data structure. This is used for configuration info
 */
-struct	Brd
-{
-    unsigned char Type;	/* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */
-    unsigned char Ivec;	/* POLLED or ivec number */
-    unsigned char Mode;	/* Control stuff, see below */
+struct Brd {
+	unsigned char Type;	/* RIO_EISA, RIO_MCA, RIO_AT, RIO_EMPTY... */
+	unsigned char Ivec;	/* POLLED or ivec number */
+	unsigned char Mode;	/* Control stuff, see below */
 };
 
-struct	Board
-{
-    char       Locator[RIO_LOCATOR_LEN];
-    int        NumSlots;
-    struct Brd Boards[MAX_RIO_BOARDS];
+struct Board {
+	char Locator[RIO_LOCATOR_LEN];
+	int NumSlots;
+	struct Brd Boards[MAX_RIO_BOARDS];
 };
 
 #define	BOOT_FROM_LINK		0x00
@@ -158,4 +155,4 @@ struct	Board
 
 #define	DBG_ALWAYS	0x80000000
 
-#endif /* __rio_riospace_h__ */
+#endif				/* __rio_riospace_h__ */

drivers/char/rio/riotime.h

@@ -40,7 +40,7 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_riotime_h_sccs = "@(#)riotime.h	1.1" ;
+static char *_rio_riotime_h_sccs = "@(#)riotime.h	1.1";
 #endif
 #endif
 
@@ -52,7 +52,7 @@ static char *_rio_riotime_h_sccs = "@(#)riotime.h	1.1" ;
 /**************************************
  * Convert a RIO tick (1/10th second)
  * into transputer low priority ticks
- *************************************/ 
+ *************************************/
 #define RioTimeToLow(time) (time*(100000 / 64))
 #define RioLowToTime(time) ((time*64)/100000)
 

drivers/char/rio/riotypes.h

@@ -89,47 +89,46 @@ typedef RIO_POINTER u_short_ptr;
 typedef RIO_POINTER ushort_ptr;
 #endif
 
-#else /* not INKERNEL */
-typedef unsigned char   BYTE;
-typedef unsigned short  WORD;
-typedef unsigned long   DWORD;
-typedef short           NUMBER;
-typedef short           *NUMBER_ptr;
-typedef unsigned short  *WORD_ptr;
-typedef unsigned char   *BYTE_ptr;
-typedef unsigned char   uchar ;
-typedef unsigned short  ushort ;
-typedef unsigned int    uint ;
-typedef unsigned long   ulong ;
-typedef unsigned char   u_char ;
-typedef unsigned short  u_short ;
-typedef unsigned int    u_int ;
-typedef unsigned long   u_long ;
-typedef unsigned short  ERROR ;
-typedef unsigned long ID ;
-typedef char             *char_ptr;
-typedef Channel          *Channel_ptr;
+#else				/* not INKERNEL */
+typedef unsigned char BYTE;
+typedef unsigned short WORD;
+typedef unsigned long DWORD;
+typedef short NUMBER;
+typedef short *NUMBER_ptr;
+typedef unsigned short *WORD_ptr;
+typedef unsigned char *BYTE_ptr;
+typedef unsigned char uchar;
+typedef unsigned short ushort;
+typedef unsigned int uint;
+typedef unsigned long ulong;
+typedef unsigned char u_char;
+typedef unsigned short u_short;
+typedef unsigned int u_int;
+typedef unsigned long u_long;
+typedef unsigned short ERROR;
+typedef unsigned long ID;
+typedef char *char_ptr;
+typedef Channel *Channel_ptr;
 typedef struct FREE_LIST *FREE_LIST_ptr;
 typedef struct FREE_LIST **FREE_LIST_ptr_ptr;
-typedef struct LPB       *LPB_ptr;
-typedef struct Process   *Process_ptr;
-typedef struct PHB       *PHB_ptr;
-typedef struct PKT       *PKT_ptr;
-typedef struct PKT       **PKT_ptr_ptr;
-typedef struct Q_BUF     *Q_BUF_ptr;
-typedef struct Q_BUF     **Q_BUF_ptr_ptr;
+typedef struct LPB *LPB_ptr;
+typedef struct Process *Process_ptr;
+typedef struct PHB *PHB_ptr;
+typedef struct PKT *PKT_ptr;
+typedef struct PKT **PKT_ptr_ptr;
+typedef struct Q_BUF *Q_BUF_ptr;
+typedef struct Q_BUF **Q_BUF_ptr_ptr;
 typedef struct ROUTE_STR *ROUTE_STR_ptr;
-typedef struct RUP       *RUP_ptr;
-typedef short            *short_ptr;
-typedef u_short          *u_short_ptr;
-typedef ushort           *ushort_ptr;
-typedef struct PKT	 PKT;
-typedef struct LPB	 LPB;
-typedef struct RUP	 RUP;
+typedef struct RUP *RUP_ptr;
+typedef short *short_ptr;
+typedef u_short *u_short_ptr;
+typedef ushort *ushort_ptr;
+typedef struct PKT PKT;
+typedef struct LPB LPB;
+typedef struct RUP RUP;
 #endif
 
 
-#endif /* __riotypes__ */
+#endif				/* __riotypes__ */
 
 /*********** end of file ***********/
-

drivers/char/rio/riscos.h

@@ -60,4 +60,4 @@ static char *_riscos_h_sccs_ = "@(#)riscos.h	1.2";
 #define RINDW(A)	(*(ushort *)(A))
 #define WINDW(A,V)	(*(ushort *)(A)=(ushort)(V))
 
-#endif /* __rio_riscos_h__ */
+#endif				/* __rio_riscos_h__ */

drivers/char/rio/rom.h

@@ -39,19 +39,19 @@
 
 #ifndef lint
 #ifdef SCCS
-static char *_rio_rom_h_sccs = "@(#)rom.h	1.1" ;
+static char *_rio_rom_h_sccs = "@(#)rom.h	1.1";
 #endif
 #endif
 
-typedef struct  ROM  ROM ;
-struct  ROM  {
-                 u_short    slx ;
-                 char       pcb_letter_rev ;
-                 char       pcb_number_rev ;
-                 char       serial[4] ;
-                 char       year ;
-                 char       week ;
-             } ;
+typedef struct ROM ROM;
+struct ROM {
+	u_short slx;
+	char pcb_letter_rev;
+	char pcb_number_rev;
+	char serial[4];
+	char year;
+	char week;
+};
 
 #endif
 
@@ -60,5 +60,3 @@ struct  ROM  {
 #define ROM_LENGTH  0x20
 
 /*********** end of file ***********/
-
-

drivers/char/rio/route.h

@@ -44,26 +44,26 @@
 #endif
 
 #define MAX_LINKS 4
-#define MAX_NODES 17                          /* Maximum nodes in a subnet */
-#define NODE_BYTES ((MAX_NODES / 8) + 1)      /* Number of bytes needed for
-                                                 1 bit per node */
-#define ROUTE_DATA_SIZE  (NODE_BYTES + 2)     /* Number of bytes for complete 
-                                                 info about cost etc. */
+#define MAX_NODES 17		/* Maximum nodes in a subnet */
+#define NODE_BYTES ((MAX_NODES / 8) + 1)	/* Number of bytes needed for
+						   1 bit per node */
+#define ROUTE_DATA_SIZE  (NODE_BYTES + 2)	/* Number of bytes for complete
+						   info about cost etc. */
 #define ROUTES_PER_PACKET ((PKT_MAX_DATA_LEN -2)/ ROUTE_DATA_SIZE)
-                                              /* Number of nodes we can squeeze
-                                                 into one packet */
+					      /* Number of nodes we can squeeze
+					         into one packet */
 #define MAX_TOPOLOGY_PACKETS (MAX_NODES / ROUTES_PER_PACKET + 1)
 /************************************************
  * Define the types of command for the ROUTE RUP.
  ************************************************/
-#define ROUTE_REQUEST    0                    /* Request an ID */
-#define ROUTE_FOAD       1                    /* Kill the RTA */
-#define ROUTE_ALREADY    2                    /* ID given already */
-#define ROUTE_USED       3                    /* All ID's used */
-#define ROUTE_ALLOCATE   4                    /* Here it is */
-#define ROUTE_REQ_TOP    5                    /* I bet you didn't expect....
-                                                 the Topological Inquisition */
-#define ROUTE_TOPOLOGY   6                    /* Topology request answered FD */
+#define ROUTE_REQUEST    0	/* Request an ID */
+#define ROUTE_FOAD       1	/* Kill the RTA */
+#define ROUTE_ALREADY    2	/* ID given already */
+#define ROUTE_USED       3	/* All ID's used */
+#define ROUTE_ALLOCATE   4	/* Here it is */
+#define ROUTE_REQ_TOP    5	/* I bet you didn't expect....
+				   the Topological Inquisition */
+#define ROUTE_TOPOLOGY   6	/* Topology request answered FD */
 /*******************************************************************
  * Define the Route Map Structure
  *
@@ -72,22 +72,22 @@
  ******************************************************************/
 typedef struct COST_ROUTE COST_ROUTE;
 struct COST_ROUTE {
-                      unsigned char cost;        /* Cost down this link */
-                      unsigned char route[NODE_BYTES]; /* Nodes thorough this route */
-                  } ;
+	unsigned char cost;	/* Cost down this link */
+	unsigned char route[NODE_BYTES];	/* Nodes thorough this route */
+};
 
-typedef struct ROUTE_STR ROUTE_STR ;
-struct  ROUTE_STR {
-                      COST_ROUTE cost_route[MAX_LINKS];
-                                                /* cost / route for this link */
-                      ushort favoured;          /* favoured link */
-                  } ;
+typedef struct ROUTE_STR ROUTE_STR;
+struct ROUTE_STR {
+	COST_ROUTE cost_route[MAX_LINKS];
+	/* cost / route for this link */
+	ushort favoured;	/* favoured link */
+};
 
 
-#define NO_LINK            (short) 5      /* Link unattached */
-#define ROUTE_NO_ID        (short) 100    /* No Id */
-#define ROUTE_DISCONNECT   (ushort) 0xff  /* Not connected */
-#define ROUTE_INTERCONNECT (ushort) 0x40  /* Sub-net interconnect */
+#define NO_LINK            (short) 5	/* Link unattached */
+#define ROUTE_NO_ID        (short) 100	/* No Id */
+#define ROUTE_DISCONNECT   (ushort) 0xff	/* Not connected */
+#define ROUTE_INTERCONNECT (ushort) 0x40	/* Sub-net interconnect */
 
 
 #define SYNC_RUP         (ushort) 255
@@ -99,10 +99,9 @@ struct  ROUTE_STR {
 #define STATUS_RUP       (ushort) 249
 #define POWER_RUP        (ushort) 248
 
-#define HIGHEST_RUP      (ushort) 255   /* Set to Top one */
-#define LOWEST_RUP       (ushort) 248   /* Set to bottom one */
+#define HIGHEST_RUP      (ushort) 255	/* Set to Top one */
+#define LOWEST_RUP       (ushort) 248	/* Set to bottom one */
 
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/rtahw.h

@@ -37,7 +37,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_rtahw_h_sccs = "@(#)rtahw.h	1.5" ;
+static char *_rio_rtahw_h_sccs = "@(#)rtahw.h	1.5";
 #endif
 #endif
 
@@ -58,12 +58,12 @@ static char *_rio_rtahw_h_sccs = "@(#)rtahw.h	1.5" ;
 ** Define the different types of modules we can have
 */
 enum module {
-    MOD_BLANK		= 0x0f,		/* Blank plate attached */
-    MOD_RS232DB25	= 0x00,		/* RS232 DB25 connector */
-    MOD_RS232RJ45	= 0x01,		/* RS232 RJ45 connector */
-    MOD_RS422DB25	= 0x02,		/* RS422 DB25 connector */
-    MOD_RS485DB25	= 0x03,		/* RS485 DB25 connector */
-    MOD_PARALLEL	= 0x04		/* Centronics parallel */
+	MOD_BLANK = 0x0f,	/* Blank plate attached */
+	MOD_RS232DB25 = 0x00,	/* RS232 DB25 connector */
+	MOD_RS232RJ45 = 0x01,	/* RS232 RJ45 connector */
+	MOD_RS422DB25 = 0x02,	/* RS422 DB25 connector */
+	MOD_RS485DB25 = 0x03,	/* RS485 DB25 connector */
+	MOD_PARALLEL = 0x04	/* Centronics parallel */
 };
 
 #define TYPE_HOST	0

drivers/char/rio/rup.h

@@ -44,39 +44,38 @@
 #endif
 
 #if defined( HOST ) || defined( INKERNEL )
-#define MAX_RUP          ((short) 16) 
+#define MAX_RUP          ((short) 16)
 #endif
 #ifdef RTA
 #define MAX_RUP          ((short) 1)
 #endif
 
-#define PKTS_PER_RUP     ((short) 2)     /* They are always used in pairs */
+#define PKTS_PER_RUP     ((short) 2)	/* They are always used in pairs */
 
 /*************************************************
  * Define all the  packet request stuff
  ************************************************/
-#define TX_RUP_INACTIVE          0        /* Nothing to transmit */
-#define TX_PACKET_READY          1        /* Transmit packet ready */
-#define TX_LOCK_RUP              2        /* Transmit side locked */
+#define TX_RUP_INACTIVE          0	/* Nothing to transmit */
+#define TX_PACKET_READY          1	/* Transmit packet ready */
+#define TX_LOCK_RUP              2	/* Transmit side locked */
 
-#define RX_RUP_INACTIVE          0        /* Nothing received */
-#define RX_PACKET_READY          1        /* Packet received */
+#define RX_RUP_INACTIVE          0	/* Nothing received */
+#define RX_PACKET_READY          1	/* Packet received */
 
-#define RUP_NO_OWNER             0xff     /* RUP not owned by any process */
+#define RUP_NO_OWNER             0xff	/* RUP not owned by any process */
 
 struct RUP {
-             PKT_ptr    txpkt;            /* Outgoing packet */
-             PKT_ptr    rxpkt;            /* Incoming packet */
-             WORD       link;             /* Which link to send down? */
-             BYTE       rup_dest_unit[2]; /* Destination unit */
-             WORD       handshake;        /* For handshaking */
-             WORD       timeout;          /* Timeout */
-             WORD       status;           /* Status */
-             WORD       txcontrol;        /* Transmit control */
-             WORD       rxcontrol;        /* Receive control */
-           };
- 
+	PKT_ptr txpkt;		/* Outgoing packet */
+	PKT_ptr rxpkt;		/* Incoming packet */
+	WORD link;		/* Which link to send down? */
+	BYTE rup_dest_unit[2];	/* Destination unit */
+	WORD handshake;		/* For handshaking */
+	WORD timeout;		/* Timeout */
+	WORD status;		/* Status */
+	WORD txcontrol;		/* Transmit control */
+	WORD rxcontrol;		/* Receive control */
+};
+
 #endif
 
 /*********** end of file ***********/
-

drivers/char/rio/rupstat.h

@@ -39,7 +39,7 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_rupstat_h_sccs = "@(#)rupstat.h	1.1" ;
+static char *_rio_rupstat_h_sccs = "@(#)rupstat.h	1.1";
 #endif
 #endif
 
@@ -48,4 +48,3 @@ static char *_rio_rupstat_h_sccs = "@(#)rupstat.h	1.1" ;
 #define    STATUS_TOPOLOGY    2
 
 #endif
-

drivers/char/rio/sam.h

@@ -60,15 +60,12 @@
 #define RX    FALSE
 
 
-typedef struct FREE_LIST FREE_LIST ;
-struct FREE_LIST   {
-                       FREE_LIST_ptr next ;
-                       FREE_LIST_ptr prev ;
-                   } ;
+typedef struct FREE_LIST FREE_LIST;
+struct FREE_LIST {
+	FREE_LIST_ptr next;
+	FREE_LIST_ptr prev;
+};
 
 
 #endif
 /*********** end of file ***********/
-
-
-

drivers/char/rio/selftest.h

@@ -38,36 +38,36 @@
 ** selftest on a booting RTA.
 */
 typedef struct {
-    short		magic;			/* Identifies packet type */
-    int			test;			/* Test number, see below */
-    unsigned int	result;			/* Result value */
-    unsigned int	dataIn;
-    unsigned int	dataOut;
-}selftestStruct;
+	short magic;		/* Identifies packet type */
+	int test;		/* Test number, see below */
+	unsigned int result;	/* Result value */
+	unsigned int dataIn;
+	unsigned int dataOut;
+} selftestStruct;
 
 /*
 ** The different tests are identified by the following data values.
 */
 enum test {
-    TESTS_COMPLETE	= 0x00,
-    MEMTEST_ADDR	= 0x01,
-    MEMTEST_BIT		= 0x02,
-    MEMTEST_FILL	= 0x03,
-    MEMTEST_DATABUS	= 0x04,
-    MEMTEST_ADDRBUS	= 0x05,
-    CD1400_INIT		= 0x10,
-    CD1400_LOOP		= 0x11,
-    CD1400_INTERRUPT    = 0x12
+	TESTS_COMPLETE = 0x00,
+	MEMTEST_ADDR = 0x01,
+	MEMTEST_BIT = 0x02,
+	MEMTEST_FILL = 0x03,
+	MEMTEST_DATABUS = 0x04,
+	MEMTEST_ADDRBUS = 0x05,
+	CD1400_INIT = 0x10,
+	CD1400_LOOP = 0x11,
+	CD1400_INTERRUPT = 0x12
 };
 
 enum result {
-    E_PORT		= 0x10,
-    E_TX		= 0x11,
-    E_RX		= 0x12,
-    E_EXCEPT		= 0x13,
-    E_COMPARE		= 0x14,
-    E_MODEM		= 0x15,
-    E_TIMEOUT		= 0x16,
-    E_INTERRUPT         = 0x17
+	E_PORT = 0x10,
+	E_TX = 0x11,
+	E_RX = 0x12,
+	E_EXCEPT = 0x13,
+	E_COMPARE = 0x14,
+	E_MODEM = 0x15,
+	E_TIMEOUT = 0x16,
+	E_INTERRUPT = 0x17
 };
-#endif	/* _selftests_h_ */
+#endif				/* _selftests_h_ */

drivers/char/rio/space.h

@@ -42,4 +42,4 @@ extern int rio_bases[];
 extern int rio_limits[];
 extern int rio_vects[];
 
-#endif /* __rio_space_h__ */
+#endif				/* __rio_space_h__ */

drivers/char/rio/sysmap.h

@@ -37,27 +37,26 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_sysmap_h_sccs = "@(#)sysmap.h	1.1" ;
+static char *_rio_sysmap_h_sccs = "@(#)sysmap.h	1.1";
 #endif
 #endif
 
-#define SYSTEM_MAP_LEN     64           /* Len of System Map array */
+#define SYSTEM_MAP_LEN     64	/* Len of System Map array */
 
 
-typedef struct SYS_MAP        SYS_MAP ;
-typedef struct SYS_MAP_LINK   SYS_MAP_LINK ;
+typedef struct SYS_MAP SYS_MAP;
+typedef struct SYS_MAP_LINK SYS_MAP_LINK;
 
 struct SYS_MAP_LINK {
-                        short id ;          /* Unit Id */
-                        short link ;        /* Id's Link */
-                        short been_here ;   /* Used by map_gen */
-                    } ;
+	short id;		/* Unit Id */
+	short link;		/* Id's Link */
+	short been_here;	/* Used by map_gen */
+};
 
 struct SYS_MAP {
-                   char         serial_num[4] ;
-                   SYS_MAP_LINK link[4] ;
-               } ;
+	char serial_num[4];
+	SYS_MAP_LINK link[4];
+};
 
 
 /*********** end of file ***********/
-

drivers/char/rio/timeouts.h

@@ -37,15 +37,14 @@
 
 #ifndef lint
 #ifdef SCCS_LABELS
-static char *_rio_defaults_h_sccs = "@(#)timeouts.h	1.3" ;
+static char *_rio_defaults_h_sccs = "@(#)timeouts.h	1.3";
 #endif
 #endif
 
-#define MILLISECOND           (int) (1000/64)   /* 15.625 low ticks */
-#define SECOND                (int) 15625       /* Low priority ticks */
+#define MILLISECOND           (int) (1000/64)	/* 15.625 low ticks */
+#define SECOND                (int) 15625	/* Low priority ticks */
 
 #define TX_TIMEOUT          (int) (200 * MILLISECOND)
 
 
 /*********** end of file ***********/
-

drivers/char/rio/top.h

@@ -40,10 +40,9 @@ static char *_top_h_sccs_ = "@(#)top.h	1.2";
 /*
 ** Topology information
 */
-struct Top
-{
-    uchar Unit;
-    uchar Link;
+struct Top {
+	uchar Unit;
+	uchar Link;
 };
 
-#endif /* __rio_top_h__ */
+#endif				/* __rio_top_h__ */

drivers/char/rio/typdef.h

@@ -45,11 +45,11 @@ static char *_typdef_h_sccs_ = "@(#)typdef.h	1.2";
 ** These types are ONLY to be used for refering to data structures
 ** on the RIO Host card!
 */
-typedef	volatile unsigned char	BYTE;
-typedef volatile unsigned short	WORD;
-typedef volatile unsigned int	DWORD;
-typedef	volatile unsigned short RIOP;
-typedef	volatile short          NUMBER;
+typedef volatile unsigned char BYTE;
+typedef volatile unsigned short WORD;
+typedef volatile unsigned int DWORD;
+typedef volatile unsigned short RIOP;
+typedef volatile short NUMBER;
 
 
 /*
@@ -59,13 +59,13 @@ typedef	volatile short          NUMBER;
 ** are here only to make the source compile.
 */
 /* typedef unsigned int	uint; */
-typedef unsigned long	ulong_t;
-typedef unsigned short	ushort_t;
-typedef unsigned char	uchar_t;
-typedef unsigned char	queue_t;
-typedef unsigned char	mblk_t;
-typedef	unsigned int 	paddr_t;
-typedef unsigned char   uchar;
+typedef unsigned long ulong_t;
+typedef unsigned short ushort_t;
+typedef unsigned char uchar_t;
+typedef unsigned char queue_t;
+typedef unsigned char mblk_t;
+typedef unsigned int paddr_t;
+typedef unsigned char uchar;
 
 #define	TPNULL	((ushort)(0x8000))
 
@@ -73,10 +73,10 @@ typedef unsigned char   uchar;
 /*
 ** RIO structures defined in other include files.
 */
-typedef struct PKT	 	PKT;
-typedef struct LPB	 	LPB;
-typedef struct RUP	 	RUP;
-typedef struct Port		Port;
-typedef struct DpRam		DpRam;
+typedef struct PKT PKT;
+typedef struct LPB LPB;
+typedef struct RUP RUP;
+typedef struct Port Port;
+typedef struct DpRam DpRam;
 
-#endif /* __rio_typdef_h__ */
+#endif				/* __rio_typdef_h__ */

drivers/char/rio/unixrup.h

@@ -41,16 +41,15 @@ static char *_unixrup_h_sccs_ = "@(#)unixrup.h	1.2";
 **    UnixRup data structure. This contains pointers to actual RUPs on the
 **    host card, and all the command/boot control stuff.
 */
-struct    UnixRup
-{
-    struct CmdBlk    *CmdsWaitingP;	/* Commands waiting to be done */
-    struct CmdBlk    *CmdPendingP;	/* The command currently being sent */
-    struct RUP       *RupP;		/* the Rup to send it to */
-    uint             Id;		/* Id number */
-    uint             BaseSysPort;	/* SysPort of first tty on this RTA */
-    uint             ModTypes;		/* Modules on this RTA */
-    spinlock_t	     RupLock;		/* Lock structure for MPX */
-/*    struct lockb     RupLock;	*/	/* Lock structure for MPX */
+struct UnixRup {
+	struct CmdBlk *CmdsWaitingP;	/* Commands waiting to be done */
+	struct CmdBlk *CmdPendingP;	/* The command currently being sent */
+	struct RUP *RupP;	/* the Rup to send it to */
+	uint Id;		/* Id number */
+	uint BaseSysPort;	/* SysPort of first tty on this RTA */
+	uint ModTypes;		/* Modules on this RTA */
+	spinlock_t RupLock;	/* Lock structure for MPX */
+	/*    struct lockb     RupLock;	*//* Lock structure for MPX */
 };
 
-#endif /* __rio_unixrup_h__ */
+#endif				/* __rio_unixrup_h__ */