Merge tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers

drivers/usb/class/cdc-wdm.c

@@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb)
 	spin_lock(&desc->iuspin);
 	desc->werr = urb->status;
 	spin_unlock(&desc->iuspin);
-	clear_bit(WDM_IN_USE, &desc->flags);
 	kfree(desc->outbuf);
+	desc->outbuf = NULL;
+	clear_bit(WDM_IN_USE, &desc->flags);
 	wake_up(&desc->wait);
 }
 
@@ -338,7 +339,7 @@ static ssize_t wdm_write
 	if (we < 0)
 		return -EIO;
 
-	desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+	buf = kmalloc(count, GFP_KERNEL);
 	if (!buf) {
 		rv = -ENOMEM;
 		goto outnl;
@@ -406,10 +407,12 @@ static ssize_t wdm_write
 	req->wIndex = desc->inum;
 	req->wLength = cpu_to_le16(count);
 	set_bit(WDM_IN_USE, &desc->flags);
+	desc->outbuf = buf;
 
 	rv = usb_submit_urb(desc->command, GFP_KERNEL);
 	if (rv < 0) {
 		kfree(buf);
+		desc->outbuf = NULL;
 		clear_bit(WDM_IN_USE, &desc->flags);
 		dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv);
 	} else {

drivers/usb/core/hcd-pci.c

@@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev)
 
 	pci_save_state(pci_dev);
 
+	/*
+	 * Some systems crash if an EHCI controller is in D3 during
+	 * a sleep transition.  We have to leave such controllers in D0.
+	 */
+	if (hcd->broken_pci_sleep) {
+		dev_dbg(dev, "Staying in PCI D0\n");
+		return retval;
+	}
+
 	/* If the root hub is dead rather than suspended, disallow remote
 	 * wakeup.  usb_hc_died() should ensure that both hosts are marked as
 	 * dying, so we only need to check the primary roothub.

drivers/usb/gadget/dummy_hcd.c

@@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g,
 
 	dum->driver = NULL;
 
-	dummy_pullup(&dum->gadget, 0);
 	return 0;
 }
 

drivers/usb/gadget/f_mass_storage.c

@@ -2189,7 +2189,7 @@ unknown_cmnd:
 		common->data_size_from_cmnd = 0;
 		sprintf(unknown, "Unknown x%02x", common->cmnd[0]);
 		reply = check_command(common, common->cmnd_size,
-				      DATA_DIR_UNKNOWN, 0xff, 0, unknown);
+				      DATA_DIR_UNKNOWN, ~0, 0, unknown);
 		if (reply == 0) {
 			common->curlun->sense_data = SS_INVALID_COMMAND;
 			reply = -EINVAL;

drivers/usb/gadget/file_storage.c

@@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg)
 		fsg->data_size_from_cmnd = 0;
 		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
 		if ((reply = check_command(fsg, fsg->cmnd_size,
-				DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) {
+				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
 			fsg->curlun->sense_data = SS_INVALID_COMMAND;
 			reply = -EINVAL;
 		}

drivers/usb/gadget/udc-core.c

@@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc)
 
 	if (udc_is_newstyle(udc)) {
 		udc->driver->disconnect(udc->gadget);
-		udc->driver->unbind(udc->gadget);
 		usb_gadget_disconnect(udc->gadget);
+		udc->driver->unbind(udc->gadget);
 		usb_gadget_udc_stop(udc->gadget, udc->driver);
 	} else {
 		usb_gadget_stop(udc->gadget, udc->driver);
@@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev,
 			usb_gadget_udc_start(udc->gadget, udc->driver);
 		usb_gadget_connect(udc->gadget);
 	} else if (sysfs_streq(buf, "disconnect")) {
+		usb_gadget_disconnect(udc->gadget);
 		if (udc_is_newstyle(udc))
 			usb_gadget_udc_stop(udc->gadget, udc->driver);
-		usb_gadget_disconnect(udc->gadget);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);
 		return -EINVAL;

drivers/usb/gadget/uvc.h

@@ -28,7 +28,7 @@
 
 struct uvc_request_data
 {
-	unsigned int length;
+	__s32 length;
 	__u8 data[60];
 };
 

drivers/usb/gadget/uvc_v4l2.c

@@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data)
 	if (data->length < 0)
 		return usb_ep_set_halt(cdev->gadget->ep0);
 
-	req->length = min(uvc->event_length, data->length);
+	req->length = min_t(unsigned int, uvc->event_length, data->length);
 	req->zero = data->length < uvc->event_length;
 	req->dma = DMA_ADDR_INVALID;
 

drivers/usb/host/ehci-pci.c

@@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 			hcd->has_tt = 1;
 			tdi_reset(ehci);
 		}
+		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) {
+			/* EHCI #1 or #2 on 6 Series/C200 Series chipset */
+			if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) {
+				ehci_info(ehci, "broken D3 during system sleep on ASUS\n");
+				hcd->broken_pci_sleep = 1;
+				device_set_wakeup_capable(&pdev->dev, false);
+			}
+		}
 		break;
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {

drivers/usb/musb/davinci.c

@@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb)
 	usb_nop_xceiv_register();
 	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv)
-		return -ENODEV;
+		goto unregister;
 
 	musb->mregs += DAVINCI_BASE_OFFSET;
 
@@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb)
 
 fail:
 	usb_put_transceiver(musb->xceiv);
+unregister:
 	usb_nop_xceiv_unregister();
 	return -ENODEV;
 }

drivers/usb/musb/musb_core.h

@@ -449,7 +449,7 @@ struct musb {
 	 * We added this flag to forcefully disable double
 	 * buffering until we get it working.
 	 */
-	unsigned                double_buffer_not_ok:1 __deprecated;
+	unsigned                double_buffer_not_ok:1;
 
 	struct musb_hdrc_config	*config;
 

drivers/usb/otg/gpio_vbus.c

@@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work)
 	struct gpio_vbus_data *gpio_vbus =
 		container_of(work, struct gpio_vbus_data, work);
 	struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
-	int gpio;
+	int gpio, status;
 
 	if (!gpio_vbus->phy.otg->gadget)
 		return;
@@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work)
 	 */
 	gpio = pdata->gpio_pullup;
 	if (is_vbus_powered(pdata)) {
+		status = USB_EVENT_VBUS;
 		gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+		gpio_vbus->phy.last_event = status;
 		usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
 
 		/* drawing a "unit load" is *always* OK, except for OTG */
@@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work)
 		/* optionally enable D+ pullup */
 		if (gpio_is_valid(gpio))
 			gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+
+		atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+					   status, gpio_vbus->phy.otg->gadget);
 	} else {
 		/* optionally disable D+ pullup */
 		if (gpio_is_valid(gpio))
@@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work)
 		set_vbus_draw(gpio_vbus, 0);
 
 		usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+		status = USB_EVENT_NONE;
 		gpio_vbus->phy.state = OTG_STATE_B_IDLE;
+		gpio_vbus->phy.last_event = status;
+
+		atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
+					   status, gpio_vbus->phy.otg->gadget);
 	}
 }
 
@@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
 			irq, err);
 		goto err_irq;
 	}
+
+	ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier);
+
 	INIT_WORK(&gpio_vbus->work, gpio_vbus_work);
 
 	gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw");

include/linux/usb/hcd.h

@@ -126,6 +126,8 @@ struct usb_hcd {
 	unsigned		wireless:1;	/* Wireless USB HCD */
 	unsigned		authorized_default:1;
 	unsigned		has_tt:1;	/* Integrated TT in root hub */
+	unsigned		broken_pci_sleep:1;	/* Don't put the
+			controller in PCI-D3 for system sleep */
 
 	unsigned int		irq;		/* irq allocated */
 	void __iomem		*regs;		/* device memory/io */