|
@@ -0,0 +1,196 @@
|
|
|
+/* Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
|
|
|
+ *
|
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
|
+ * it under the terms of the GNU General Public License version 2 and
|
|
|
+ * only version 2 as published by the Free Software Foundation.
|
|
|
+ *
|
|
|
+ * This program is distributed in the hope that it will be useful,
|
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
+ * GNU General Public License for more details.
|
|
|
+ *
|
|
|
+ * You should have received a copy of the GNU General Public License
|
|
|
+ * along with this program; if not, write to the Free Software
|
|
|
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
|
+ * 02110-1301, USA.
|
|
|
+ */
|
|
|
+
|
|
|
+#include <linux/kernel.h>
|
|
|
+#include <linux/irq.h>
|
|
|
+#include <linux/gpio.h>
|
|
|
+#include <linux/platform_device.h>
|
|
|
+#include <linux/delay.h>
|
|
|
+#include <linux/bootmem.h>
|
|
|
+#include <linux/io.h>
|
|
|
+#include <linux/smsc911x.h>
|
|
|
+
|
|
|
+#include <asm/mach-types.h>
|
|
|
+#include <asm/mach/arch.h>
|
|
|
+#include <asm/setup.h>
|
|
|
+
|
|
|
+#include <mach/gpio.h>
|
|
|
+#include <mach/board.h>
|
|
|
+#include <mach/camera.h>
|
|
|
+#include <mach/memory.h>
|
|
|
+#include <mach/msm_iomap.h>
|
|
|
+#include <mach/msm_hsusb.h>
|
|
|
+#include <mach/dma.h>
|
|
|
+
|
|
|
+#include <mach/vreg.h>
|
|
|
+
|
|
|
+#include "devices.h"
|
|
|
+#include "timer.h"
|
|
|
+#include "socinfo.h"
|
|
|
+
|
|
|
+static struct resource smc91x_resources[] = {
|
|
|
+ [0] = {
|
|
|
+ .start = 0x8A000300,
|
|
|
+ .end = 0x8A0003ff,
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
+ },
|
|
|
+ [1] = {
|
|
|
+ .start = MSM_GPIO_TO_INT(156),
|
|
|
+ .end = MSM_GPIO_TO_INT(156),
|
|
|
+ .flags = IORESOURCE_IRQ,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device smc91x_device = {
|
|
|
+ .name = "smc91x",
|
|
|
+ .id = 0,
|
|
|
+ .num_resources = ARRAY_SIZE(smc91x_resources),
|
|
|
+ .resource = smc91x_resources,
|
|
|
+};
|
|
|
+
|
|
|
+static struct smsc911x_platform_config smsc911x_config = {
|
|
|
+ .phy_interface = PHY_INTERFACE_MODE_MII,
|
|
|
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
|
|
|
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
|
|
|
+ .flags = SMSC911X_USE_32BIT,
|
|
|
+};
|
|
|
+
|
|
|
+static struct resource smsc911x_resources[] = {
|
|
|
+ [0] = {
|
|
|
+ .start = 0x8D000000,
|
|
|
+ .end = 0x8D000100,
|
|
|
+ .flags = IORESOURCE_MEM,
|
|
|
+ },
|
|
|
+ [1] = {
|
|
|
+ .start = MSM_GPIO_TO_INT(88),
|
|
|
+ .end = MSM_GPIO_TO_INT(88),
|
|
|
+ .flags = IORESOURCE_IRQ,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static struct platform_device smsc911x_device = {
|
|
|
+ .name = "smsc911x",
|
|
|
+ .id = -1,
|
|
|
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
|
|
|
+ .resource = smsc911x_resources,
|
|
|
+ .dev = {
|
|
|
+ .platform_data = &smsc911x_config,
|
|
|
+ },
|
|
|
+};
|
|
|
+
|
|
|
+static struct msm_gpio smsc911x_gpios[] = {
|
|
|
+ { GPIO_CFG(172, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr6" },
|
|
|
+ { GPIO_CFG(173, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr5" },
|
|
|
+ { GPIO_CFG(174, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr4" },
|
|
|
+ { GPIO_CFG(175, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr3" },
|
|
|
+ { GPIO_CFG(176, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr2" },
|
|
|
+ { GPIO_CFG(177, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr1" },
|
|
|
+ { GPIO_CFG(178, 2, GPIO_OUTPUT, GPIO_PULL_DOWN, GPIO_2MA), "ebi2_addr0" },
|
|
|
+ { GPIO_CFG(88, 2, GPIO_INPUT, GPIO_PULL_UP, GPIO_2MA), "smsc911x_irq" },
|
|
|
+};
|
|
|
+
|
|
|
+static void msm7x30_cfg_smsc911x(void)
|
|
|
+{
|
|
|
+ int rc;
|
|
|
+
|
|
|
+ rc = msm_gpios_request_enable(smsc911x_gpios,
|
|
|
+ ARRAY_SIZE(smsc911x_gpios));
|
|
|
+ if (rc)
|
|
|
+ pr_err("%s: unable to enable gpios\n", __func__);
|
|
|
+}
|
|
|
+
|
|
|
+static struct platform_device *devices[] __initdata = {
|
|
|
+ &msm_device_smd,
|
|
|
+ &msm_device_dmov,
|
|
|
+ &smc91x_device,
|
|
|
+ &smsc911x_device,
|
|
|
+ &msm_device_nand,
|
|
|
+ &msm_device_uart_dm1,
|
|
|
+};
|
|
|
+
|
|
|
+static void __init msm7x30_init_irq(void)
|
|
|
+{
|
|
|
+ msm_init_irq();
|
|
|
+}
|
|
|
+
|
|
|
+static void __init msm_7x30_init_nand(void)
|
|
|
+{
|
|
|
+ int rc;
|
|
|
+ /* Enable GPIO 86 & 115 */
|
|
|
+ rc = msm_gpios_request_enable(msm_nand_ebi2_cfg_data,
|
|
|
+ ARRAY_SIZE(msm_nand_ebi2_cfg_data));
|
|
|
+ if (rc)
|
|
|
+ printk(KERN_ERR "%s: Failed to enable GPIO 86 & 115\n",
|
|
|
+ __func__);
|
|
|
+}
|
|
|
+
|
|
|
+static void __init msm7x30_init(void)
|
|
|
+{
|
|
|
+ if (socinfo_init() < 0)
|
|
|
+ printk(KERN_ERR "%s: socinfo_init() failed!\n",
|
|
|
+ __func__);
|
|
|
+ msm_acpu_clock_init(&msm7x30_clock_data);
|
|
|
+ if (machine_is_msm7x30_surf() || machine_is_msm7x30_fluid())
|
|
|
+ msm7x30_cfg_smsc911x();
|
|
|
+ platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
|
+ msm_7x30_init_nand();
|
|
|
+ buses_init();
|
|
|
+}
|
|
|
+
|
|
|
+static void __init msm7x30_map_io(void)
|
|
|
+{
|
|
|
+ msm_shared_ram_phys = 0x00000000;
|
|
|
+ msm_map_msm7x30_io();
|
|
|
+ msm7x30_allocate_memory_regions();
|
|
|
+ msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30);
|
|
|
+}
|
|
|
+
|
|
|
+MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
|
|
|
+#ifdef CONFIG_MSM_DEBUG_UART
|
|
|
+ .phys_io = MSM_DEBUG_UART_PHYS,
|
|
|
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
|
|
|
+#endif
|
|
|
+ .boot_params = PHYS_OFFSET + 0x100,
|
|
|
+ .map_io = msm7x30_map_io,
|
|
|
+ .init_irq = msm7x30_init_irq,
|
|
|
+ .init_machine = msm7x30_init,
|
|
|
+ .timer = &msm_timer,
|
|
|
+MACHINE_END
|
|
|
+
|
|
|
+MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
|
|
|
+#ifdef CONFIG_MSM_DEBUG_UART
|
|
|
+ .phys_io = MSM_DEBUG_UART_PHYS,
|
|
|
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
|
|
|
+#endif
|
|
|
+ .boot_params = PHYS_OFFSET + 0x100,
|
|
|
+ .map_io = msm7x30_map_io,
|
|
|
+ .init_irq = msm7x30_init_irq,
|
|
|
+ .init_machine = msm7x30_init,
|
|
|
+ .timer = &msm_timer,
|
|
|
+MACHINE_END
|
|
|
+
|
|
|
+MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
|
|
|
+#ifdef CONFIG_MSM_DEBUG_UART
|
|
|
+ .phys_io = MSM_DEBUG_UART_PHYS,
|
|
|
+ .io_pg_offst = ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
|
|
|
+#endif
|
|
|
+ .boot_params = PHYS_OFFSET + 0x100,
|
|
|
+ .map_io = msm7x30_map_io,
|
|
|
+ .init_irq = msm7x30_init_irq,
|
|
|
+ .init_machine = msm7x30_init,
|
|
|
+ .timer = &msm_timer,
|
|
|
+MACHINE_END
|