V4L/DVB (5169): Pvrusb2: Use macro names for FX2 commands

This is a maintainability cleanup; use nice names for all the FX2
commands instead of raw bytes.  This way we can easily find where we
issue FX commands.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mike Isely <isely@pobox.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/pvrusb2/pvrusb2-encoder.c

@@ -26,6 +26,7 @@
 #include "pvrusb2-encoder.h"
 #include "pvrusb2-hdw-internal.h"
 #include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
 
 
 
@@ -57,7 +58,7 @@ static int pvr2_encoder_write_words(struct pvr2_hdw *hdw,
 		chunkCnt = 8;
 		if (chunkCnt > dlen) chunkCnt = dlen;
 		memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
-		hdw->cmd_buffer[0] = 0x01;
+		hdw->cmd_buffer[0] = FX2CMD_MEM_WRITE_DWORD;
 		for (idx = 0; idx < chunkCnt; idx++) {
 			hdw->cmd_buffer[1+(idx*7)+6] = 0x44 + idx + offs;
 			PVR2_DECOMPOSE_LE(hdw->cmd_buffer, 1+(idx*7),
@@ -98,7 +99,8 @@ static int pvr2_encoder_read_words(struct pvr2_hdw *hdw,int statusFl,
 		chunkCnt = 16;
 		if (chunkCnt > dlen) chunkCnt = dlen;
 		memset(hdw->cmd_buffer,0,sizeof(hdw->cmd_buffer));
-		hdw->cmd_buffer[0] = statusFl ? 0x02 : 0x28;
+		hdw->cmd_buffer[0] =
+			(statusFl ? FX2CMD_MEM_READ_DWORD : FX2CMD_MEM_READ_64BYTES);
 		hdw->cmd_buffer[7] = 0x44 + offs;
 		ret = pvr2_send_request(hdw,
 					hdw->cmd_buffer,8,

drivers/media/video/pvrusb2/pvrusb2-fx2-cmd.h

@@ -0,0 +1,28 @@
+#ifndef _PVRUSB2_FX2_CMD_H_
+#define _PVRUSB2_FX2_CMD_H_
+
+#define FX2CMD_MEM_WRITE_DWORD  0x01
+#define FX2CMD_MEM_READ_DWORD   0x02
+
+#define FX2CMD_MEM_READ_64BYTES 0x28
+
+#define FX2CMD_REG_WRITE        0x04
+#define FX2CMD_REG_READ         0x05
+
+#define FX2CMD_I2C_WRITE        0x08
+#define FX2CMD_I2C_READ         0x09
+
+#define FX2CMD_GET_USB_SPEED    0x0b
+
+#define FX2CMD_STREAMING_ON     0x36
+#define FX2CMD_STREAMING_OFF    0x37
+
+#define FX2CMD_POWER_OFF        0xdc
+#define FX2CMD_POWER_ON         0xde
+
+#define FX2CMD_DEEP_RESET       0xdd
+
+#define FX2CMD_GET_EEPROM_ADDR  0xeb
+#define FX2CMD_GET_IR_CODE      0xec
+
+#endif /* _PVRUSB2_FX2_CMD_H_ */

drivers/media/video/pvrusb2/pvrusb2-hdw.c

@@ -36,6 +36,7 @@
 #include "pvrusb2-hdw-internal.h"
 #include "pvrusb2-encoder.h"
 #include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
 
 #define TV_MIN_FREQ     55250000L
 #define TV_MAX_FREQ    850000000L
@@ -1647,7 +1648,7 @@ static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw)
 	   firmware needs be loaded. */
 	int result;
 	LOCK_TAKE(hdw->ctl_lock); do {
-		hdw->cmd_buffer[0] = 0xeb;
+		hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
 		result = pvr2_send_request_ex(hdw,HZ*1,!0,
 					   hdw->cmd_buffer,1,
 					   hdw->cmd_buffer,1);
@@ -2526,7 +2527,7 @@ int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw)
 {
 	int result;
 	LOCK_TAKE(hdw->ctl_lock); do {
-		hdw->cmd_buffer[0] = 0x0b;
+		hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED;
 		result = pvr2_send_request(hdw,
 					   hdw->cmd_buffer,1,
 					   hdw->cmd_buffer,1);
@@ -2976,7 +2977,7 @@ int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data)
 
 	LOCK_TAKE(hdw->ctl_lock);
 
-	hdw->cmd_buffer[0] = 0x04;  /* write register prefix */
+	hdw->cmd_buffer[0] = FX2CMD_REG_WRITE;  /* write register prefix */
 	PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data);
 	hdw->cmd_buffer[5] = 0;
 	hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
@@ -2997,7 +2998,7 @@ static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data)
 
 	LOCK_TAKE(hdw->ctl_lock);
 
-	hdw->cmd_buffer[0] = 0x05;  /* read register prefix */
+	hdw->cmd_buffer[0] = FX2CMD_REG_READ;  /* read register prefix */
 	hdw->cmd_buffer[1] = 0;
 	hdw->cmd_buffer[2] = 0;
 	hdw->cmd_buffer[3] = 0;
@@ -3121,7 +3122,7 @@ int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw)
 	LOCK_TAKE(hdw->ctl_lock); do {
 		pvr2_trace(PVR2_TRACE_INIT,"Requesting uproc hard reset");
 		hdw->flag_ok = !0;
-		hdw->cmd_buffer[0] = 0xdd;
+		hdw->cmd_buffer[0] = FX2CMD_DEEP_RESET;
 		status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0);
 	} while (0); LOCK_GIVE(hdw->ctl_lock);
 	return status;
@@ -3133,7 +3134,7 @@ int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw)
 	int status;
 	LOCK_TAKE(hdw->ctl_lock); do {
 		pvr2_trace(PVR2_TRACE_INIT,"Requesting powerup");
-		hdw->cmd_buffer[0] = 0xde;
+		hdw->cmd_buffer[0] = FX2CMD_POWER_ON;
 		status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0);
 	} while (0); LOCK_GIVE(hdw->ctl_lock);
 	return status;
@@ -3166,7 +3167,8 @@ static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl)
 {
 	int status;
 	LOCK_TAKE(hdw->ctl_lock); do {
-		hdw->cmd_buffer[0] = (runFl ? 0x36 : 0x37);
+		hdw->cmd_buffer[0] =
+			(runFl ? FX2CMD_STREAMING_ON : FX2CMD_STREAMING_OFF);
 		status = pvr2_send_request(hdw,hdw->cmd_buffer,1,NULL,0);
 	} while (0); LOCK_GIVE(hdw->ctl_lock);
 	if (!status) {
@@ -3265,7 +3267,7 @@ static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw)
 {
 	int result;
 	LOCK_TAKE(hdw->ctl_lock); do {
-		hdw->cmd_buffer[0] = 0xeb;
+		hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
 		result = pvr2_send_request(hdw,
 					   hdw->cmd_buffer,1,
 					   hdw->cmd_buffer,1);

drivers/media/video/pvrusb2/pvrusb2-i2c-core.c

@@ -22,6 +22,7 @@
 #include "pvrusb2-i2c-core.h"
 #include "pvrusb2-hdw-internal.h"
 #include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
 
 #define trace_i2c(...) pvr2_trace(PVR2_TRACE_I2C,__VA_ARGS__)
 
@@ -66,7 +67,7 @@ static int pvr2_i2c_write(struct pvr2_hdw *hdw, /* Context */
 	memset(hdw->cmd_buffer, 0, sizeof(hdw->cmd_buffer));
 
 	/* Set up command buffer for an I2C write */
-	hdw->cmd_buffer[0] = 0x08;      /* write prefix */
+	hdw->cmd_buffer[0] = FX2CMD_I2C_WRITE;      /* write prefix */
 	hdw->cmd_buffer[1] = i2c_addr;  /* i2c addr of chip */
 	hdw->cmd_buffer[2] = length;    /* length of what follows */
 	if (length) memcpy(hdw->cmd_buffer + 3, data, length);
@@ -128,7 +129,7 @@ static int pvr2_i2c_read(struct pvr2_hdw *hdw, /* Context */
 	memset(hdw->cmd_buffer, 0, sizeof(hdw->cmd_buffer));
 
 	/* Set up command buffer for an I2C write followed by a read */
-	hdw->cmd_buffer[0] = 0x09;  /* read prefix */
+	hdw->cmd_buffer[0] = FX2CMD_I2C_READ;  /* read prefix */
 	hdw->cmd_buffer[1] = dlen;  /* arg length */
 	hdw->cmd_buffer[2] = rlen;  /* answer length. Device will send one
 				       more byte (status). */
@@ -221,7 +222,7 @@ static int i2c_24xxx_ir(struct pvr2_hdw *hdw,
 
 	/* Issue a command to the FX2 to read the IR receiver. */
 	LOCK_TAKE(hdw->ctl_lock); do {
-		hdw->cmd_buffer[0] = 0xec;
+		hdw->cmd_buffer[0] = FX2CMD_GET_IR_CODE;
 		stat = pvr2_send_request(hdw,
 					 hdw->cmd_buffer,1,
 					 hdw->cmd_buffer,4);

drivers/media/video/pvrusb2/pvrusb2-v4l2.c

@@ -366,8 +366,7 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file,
 	{
 		struct v4l2_tuner *vt = (struct v4l2_tuner *)arg;
 
-		if (vt->index != 0)
-			break;
+		if (vt->index != 0) break; /* Only answer for the 1st tuner */
 
 		pvr2_hdw_execute_tuner_poll(hdw);
 		ret = pvr2_hdw_get_tuner_status(hdw,vt);