浏览代码

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6

Conflicts:
	drivers/net/ucc_geth.c
David S. Miller 16 年之前
父节点
当前提交
8be7cdccac

+ 21 - 0
drivers/dca/dca-sysfs.c

@@ -1,3 +1,24 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>

+ 1 - 1
drivers/net/Kconfig

@@ -1051,7 +1051,7 @@ config NI65
 
 config DNET
 	tristate "Dave ethernet support (DNET)"
-	depends on NET_ETHERNET
+	depends on NET_ETHERNET && HAS_IOMEM
 	select PHYLIB
 	help
 	  The Dave ethernet interface (DNET) is found on Qong Board FPGA.

+ 1 - 0
drivers/net/benet/be.h

@@ -194,6 +194,7 @@ struct be_adapter {
 	struct be_eq_obj rx_eq;
 	struct be_rx_obj rx_obj;
 	u32 big_page_size;	/* Compounded page size shared by rx wrbs */
+	bool rx_post_starved;	/* Zero rx frags have been posted to BE */
 
 	struct vlan_group *vlan_grp;
 	u16 num_vlans;

+ 34 - 26
drivers/net/benet/be_main.c

@@ -273,26 +273,6 @@ static void be_rx_eqd_update(struct be_adapter *adapter)
 	rx_eq->cur_eqd = eqd;
 }
 
-static void be_worker(struct work_struct *work)
-{
-	struct be_adapter *adapter =
-		container_of(work, struct be_adapter, work.work);
-	int status;
-
-	/* Check link */
-	be_link_status_update(adapter);
-
-	/* Get Stats */
-	status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
-	if (!status)
-		netdev_stats_update(adapter);
-
-	/* Set EQ delay */
-	be_rx_eqd_update(adapter);
-
-	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
-}
-
 static struct net_device_stats *be_get_stats(struct net_device *dev)
 {
 	struct be_adapter *adapter = netdev_priv(dev);
@@ -493,7 +473,7 @@ static int be_change_mtu(struct net_device *netdev, int new_mtu)
  * program them in BE.  If more than BE_NUM_VLANS_SUPPORTED are configured,
  * set the BE in promiscuous VLAN mode.
  */
-static void be_vids_config(struct net_device *netdev)
+static void be_vid_config(struct net_device *netdev)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	u16 vtag[BE_NUM_VLANS_SUPPORTED];
@@ -536,7 +516,7 @@ static void be_vlan_add_vid(struct net_device *netdev, u16 vid)
 	adapter->num_vlans++;
 	adapter->vlan_tag[vid] = 1;
 
-	be_vids_config(netdev);
+	be_vid_config(netdev);
 }
 
 static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
@@ -547,7 +527,7 @@ static void be_vlan_rem_vid(struct net_device *netdev, u16 vid)
 	adapter->vlan_tag[vid] = 0;
 
 	vlan_group_set_device(adapter->vlan_grp, vid, NULL);
-	be_vids_config(netdev);
+	be_vid_config(netdev);
 }
 
 static void be_set_multicast_filter(struct net_device *netdev)
@@ -900,8 +880,11 @@ static void be_post_rx_frags(struct be_adapter *adapter)
 		page_info->last_page_user = true;
 
 	if (posted) {
-		be_rxq_notify(&adapter->ctrl, rxq->id, posted);
 		atomic_add(posted, &rxq->used);
+		be_rxq_notify(&adapter->ctrl, rxq->id, posted);
+	} else if (atomic_read(&rxq->used) == 0) {
+		/* Let be_worker replenish when memory is available */
+		adapter->rx_post_starved = true;
 	}
 
 	return;
@@ -1305,6 +1288,31 @@ int be_poll_tx(struct napi_struct *napi, int budget)
 	return 1;
 }
 
+static void be_worker(struct work_struct *work)
+{
+	struct be_adapter *adapter =
+		container_of(work, struct be_adapter, work.work);
+	int status;
+
+	/* Check link */
+	be_link_status_update(adapter);
+
+	/* Get Stats */
+	status = be_cmd_get_stats(&adapter->ctrl, &adapter->stats.cmd);
+	if (!status)
+		netdev_stats_update(adapter);
+
+	/* Set EQ delay */
+	be_rx_eqd_update(adapter);
+
+	if (adapter->rx_post_starved) {
+		adapter->rx_post_starved = false;
+		be_post_rx_frags(adapter);
+	}
+
+	schedule_delayed_work(&adapter->work, msecs_to_jiffies(1000));
+}
+
 static void be_msix_enable(struct be_adapter *adapter)
 {
 	int i, status;
@@ -1422,6 +1430,8 @@ static int be_open(struct net_device *netdev)
 	if (status != 0)
 		goto do_none;
 
+	be_vid_config(netdev);
+
 	status = be_cmd_set_flow_control(ctrl, true, true);
 	if (status != 0)
 		goto if_destroy;
@@ -1856,8 +1866,6 @@ static int be_resume(struct pci_dev *pdev)
 	pci_set_power_state(pdev, 0);
 	pci_restore_state(pdev);
 
-	be_vids_config(netdev);
-
 	if (netif_running(netdev)) {
 		rtnl_lock();
 		be_open(netdev);

+ 4 - 2
drivers/net/dm9000.c

@@ -930,13 +930,15 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
 	struct net_device *dev = dev_id;
 	board_info_t *db = netdev_priv(dev);
 	int int_status;
+	unsigned long flags;
 	u8 reg_save;
 
 	dm9000_dbg(db, 3, "entering %s\n", __func__);
 
 	/* A real interrupt coming */
 
-	spin_lock(&db->lock);
+	/* holders of db->lock must always block IRQs */
+	spin_lock_irqsave(&db->lock, flags);
 
 	/* Save previous register address */
 	reg_save = readb(db->io_addr);
@@ -972,7 +974,7 @@ static irqreturn_t dm9000_interrupt(int irq, void *dev_id)
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
 
-	spin_unlock(&db->lock);
+	spin_unlock_irqrestore(&db->lock, flags);
 
 	return IRQ_HANDLED;
 }

+ 3 - 3
drivers/net/dnet.c

@@ -279,11 +279,11 @@ static int dnet_mii_probe(struct net_device *dev)
 
 	/* attach the mac to the phy */
 	if (bp->capabilities & DNET_HAS_RMII) {
-		phydev = phy_connect(dev, phydev->dev.bus_id,
+		phydev = phy_connect(dev, dev_name(&phydev->dev),
 				     &dnet_handle_link_change, 0,
 				     PHY_INTERFACE_MODE_RMII);
 	} else {
-		phydev = phy_connect(dev, phydev->dev.bus_id,
+		phydev = phy_connect(dev, dev_name(&phydev->dev),
 				     &dnet_handle_link_change, 0,
 				     PHY_INTERFACE_MODE_MII);
 	}
@@ -926,7 +926,7 @@ static int __devinit dnet_probe(struct platform_device *pdev)
 	phydev = bp->phy_dev;
 	dev_info(&pdev->dev, "attached PHY driver [%s] "
 	       "(mii_bus:phy_addr=%s, irq=%d)\n",
-	       phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+	       phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
 
 	return 0;
 

+ 4 - 5
drivers/net/sungem.c

@@ -2998,8 +2998,11 @@ static const struct net_device_ops gem_netdev_ops = {
 	.ndo_do_ioctl		= gem_ioctl,
 	.ndo_tx_timeout		= gem_tx_timeout,
 	.ndo_change_mtu		= gem_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address    = gem_set_mac_address,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller    = gem_poll_controller,
+#endif
 };
 
 static int __devinit gem_init_one(struct pci_dev *pdev,
@@ -3161,10 +3164,6 @@ static int __devinit gem_init_one(struct pci_dev *pdev,
 	dev->watchdog_timeo = 5 * HZ;
 	dev->irq = pdev->irq;
 	dev->dma = 0;
-	dev->set_mac_address = gem_set_mac_address;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = gem_poll_controller;
-#endif
 
 	/* Set that now, in case PM kicks in now */
 	pci_set_drvdata(pdev, dev);

+ 13 - 23
drivers/net/ucc_geth.c

@@ -1536,32 +1536,15 @@ static void adjust_link(struct net_device *dev)
 static int init_phy(struct net_device *dev)
 {
 	struct ucc_geth_private *priv = netdev_priv(dev);
-	struct device_node *np = priv->node;
-	struct device_node *phy, *mdio;
-	const phandle *ph;
-	char bus_name[MII_BUS_ID_SIZE];
-	const unsigned int *id;
+	struct ucc_geth_info *ug_info = priv->ug_info;
 	struct phy_device *phydev;
-	char phy_id[BUS_ID_SIZE];
 
 	priv->oldlink = 0;
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	ph = of_get_property(np, "phy-handle", NULL);
-	phy = of_find_node_by_phandle(*ph);
-	mdio = of_get_parent(phy);
-
-	id = of_get_property(phy, "reg", NULL);
-
-	of_node_put(phy);
-	of_node_put(mdio);
-
-	fsl_pq_mdio_bus_name(bus_name, mdio);
-	snprintf(phy_id, sizeof(phy_id), "%s:%02x",
-                                bus_name, *id);
-
-	phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
+	phydev = phy_connect(dev, ug_info->phy_bus_id, &adjust_link, 0,
+			     priv->phy_interface);
 
 	if (IS_ERR(phydev)) {
 		printk("%s: Could not attach to PHY\n", dev->name);
@@ -3629,10 +3612,12 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
 	fixed_link = of_get_property(np, "fixed-link", NULL);
 	if (fixed_link) {
-		snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
-		ug_info->phy_address = fixed_link[0];
+		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+			 PHY_ID_FMT, "0", fixed_link[0]);
 		phy = NULL;
 	} else {
+		char bus_name[MII_BUS_ID_SIZE];
+
 		ph = of_get_property(np, "phy-handle", NULL);
 		phy = of_find_node_by_phandle(*ph);
 
@@ -3643,7 +3628,6 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		prop = of_get_property(phy, "reg", NULL);
 		if (prop == NULL)
 			return -1;
-		ug_info->phy_address = *prop;
 
 		/* Set the bus id */
 		mdio = of_get_parent(phy);
@@ -3657,8 +3641,14 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		if (err)
 			return -1;
 
+<<<<<<< HEAD:drivers/net/ucc_geth.c
 		snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "%x",
 				res.start&0xfffff);
+=======
+		uec_mdio_bus_name(bus_name, mdio);
+		snprintf(ug_info->phy_bus_id, sizeof(ug_info->phy_bus_id),
+			"%s:%02x", bus_name, *prop);
+>>>>>>> 61fa9dcf9329cb92c220f7b656410fbe5e72f933:drivers/net/ucc_geth.c
 	}
 
 	/* get the phy interface type, or default to MII */

+ 1 - 2
drivers/net/ucc_geth.h

@@ -1101,8 +1101,7 @@ struct ucc_geth_info {
 	u32 eventRegMask;
 	u16 pausePeriod;
 	u16 extensionField;
-	u8 phy_address;
-	char mdio_bus[MII_BUS_ID_SIZE];
+	char phy_bus_id[BUS_ID_SIZE];
 	u8 weightfactor[NUM_TX_QUEUES];
 	u8 interruptcoalescingmaxvalue[NUM_RX_QUEUES];
 	u8 l2qt[UCC_GETH_VLAN_PRIORITY_MAX];

+ 20 - 0
include/linux/dca.h

@@ -1,3 +1,23 @@
+/*
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
 #ifndef DCA_H
 #define DCA_H
 /* DCA Provider API */

+ 11 - 0
net/wireless/nl80211.c

@@ -1950,6 +1950,11 @@ static int nl80211_get_mesh_params(struct sk_buff *skb,
 	if (err)
 		return err;
 
+	if (!drv->ops->get_mesh_params) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
 	/* Get the mesh params */
 	rtnl_lock();
 	err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
@@ -2059,6 +2064,11 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 	if (err)
 		return err;
 
+	if (!drv->ops->set_mesh_params) {
+		err = -EOPNOTSUPP;
+		goto out;
+	}
+
 	/* This makes sure that there aren't more than 32 mesh config
 	 * parameters (otherwise our bitfield scheme would not work.) */
 	BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
@@ -2103,6 +2113,7 @@ static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
 	err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
 	rtnl_unlock();
 
+ out:
 	/* cleanup */
 	cfg80211_put_dev(drv);
 	dev_put(dev);