Merge tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A fairly quiet release again, a couple of relatively small new
  features and a bunch of driver specific work including yet more code
  elimination and fixes from Axel Lin.

   - Addidion of linear_min_sel for offsetting linear selectors in the
     helpers.
   - Support for continuous voltage ranges for regulators with extremely
     high resolution.
   - Drivers for AS3711, DA9055, MAX9873, TPS51632, TPS80031 and ARM
     vexpress."

Fix up trivial conflict (due to typo fix) in palmas-regulator.c

* tag 'regulator-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (80 commits)
  regulator: core: Fix logic to determinate if regulator can change voltage
  regulator: s5m8767: Fix to work even if no DVS gpio present
  regulator: s5m8767: Fix to read the first DVS register.
  regulator: s5m8767: Fix to work when platform registers less regulators
  regulator: gpio-regulator: gpio_set_value should use cansleep
  regulator: gpio-regulator: Fix logical error in for() loop
  regulator: anatop: Use regulator_[get|set]_voltage_sel_regmap
  regulator: anatop: Use linear_min_sel with linear mapping
  regulator: max1586: Implement get_voltage_sel callback
  regulator: lp8788-buck: Kill _gpio_request function
  regulator: tps80031: Convert tps80031_ldo_ops to linear_min_sel and list_voltage_linear
  regulator: lp8788-ldo: Remove val array in lp8788_config_ldo_enable_mode
  regulator: gpio-regulator: Add ifdef CONFIG_OF guard for regulator_gpio_of_match
  regulator: palmas: Convert palmas_ops_smps to regulator_[get|set]_voltage_sel_regmap
  regulator: palmas: Return raw register values as the selectors in [get|set]_voltage_sel
  regulators: add regulator_can_change_voltage() function
  regulator: tps51632: Ensure [base|max]_voltage_uV pdata settings are valid
  regulator: wm831x-dcdc: Add MODULE_ALIAS for wm831x-boostp
  regulator: wm831x-dcdc: Ensure selected voltage falls within requested range
  regulator: tps51632: Use linear_min_sel and regulator_[map|list]_voltage_linear
  ...

Documentation/devicetree/bindings/regulator/gpio-regulator.txt

@@ -0,0 +1,37 @@
+GPIO controlled regulators
+
+Required properties:
+- compatible		: Must be "regulator-gpio".
+- states		: Selection of available voltages and GPIO configs.
+                          if there are no states, then use a fixed regulator
+
+Optional properties:
+- enable-gpio		: GPIO to use to enable/disable the regulator.
+- gpios			: GPIO group used to control voltage.
+- startup-delay-us	: Startup time in microseconds.
+- enable-active-high	: Polarity of GPIO is active high (default is low).
+
+Any property defined as part of the core regulator binding defined in
+regulator.txt can also be used.
+
+Example:
+
+	mmciv: gpio-regulator {
+		compatible = "regulator-gpio";
+
+		regulator-name = "mmci-gpio-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2600000>;
+		regulator-boot-on;
+
+		enable-gpio = <&gpio0 23 0x4>;
+		gpios = <&gpio0 24 0x4
+			 &gpio0 25 0x4>;
+		states = <1800000 0x3
+			  2200000 0x2
+			  2600000 0x1
+			  2900000 0x0>;
+
+		startup-delay-us = <100000>;
+		enable-active-high;
+	};

Documentation/devicetree/bindings/regulator/max8925-regulator.txt

@@ -0,0 +1,40 @@
+Max8925 Voltage regulators
+
+Required nodes:
+-nodes:
+  - SDV1 for SDV SDV1
+  - SDV2 for SDV SDV2
+  - SDV3 for SDV SDV3
+  - LDO1 for LDO LDO1
+  - LDO2 for LDO LDO2
+  - LDO3 for LDO LDO3
+  - LDO4 for LDO LDO4
+  - LDO5 for LDO LDO5
+  - LDO6 for LDO LDO6
+  - LDO7 for LDO LDO7
+  - LDO8 for LDO LDO8
+  - LDO9 for LDO LDO9
+  - LDO10 for LDO LDO10
+  - LDO11 for LDO LDO11
+  - LDO12 for LDO LDO12
+  - LDO13 for LDO LDO13
+  - LDO14 for LDO LDO14
+  - LDO15 for LDO LDO15
+  - LDO16 for LDO LDO16
+  - LDO17 for LDO LDO17
+  - LDO18 for LDO LDO18
+  - LDO19 for LDO LDO19
+  - LDO20 for LDO LDO20
+
+Optional properties:
+- Any optional property defined in bindings/regulator/regulator.txt
+
+Example:
+
+	SDV1 {
+		regulator-min-microvolt = <637500>;
+		regulator-max-microvolt = <1425000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+

Documentation/devicetree/bindings/regulator/max8997-regulator.txt

@@ -0,0 +1,146 @@
+* Maxim MAX8997 Voltage and Current Regulator
+
+The Maxim MAX8997 is a multi-function device which includes volatage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of max8997.
+
+Required properties:
+- compatible: Should be "maxim,max8997-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- max8997,pmic-buck1-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck1 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+- max8997,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+- max8997,pmic-buck5-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+  units for buck5 when changing voltage using gpio dvs. Refer to [1] below
+  for additional information.
+
+[1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+    property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage'
+    property should specify atleast one voltage level (which would be a
+    safe operating voltage).
+
+    If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional
+    property is specified, then all the eigth voltage values for the
+    'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+  the interrupts from max8997 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+  - First interrupt specifier is for 'irq1' interrupt.
+  - Second interrupt specifier is for 'alert' interrupt.
+- max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
+- max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+- max8997,pmic-ignore-gpiodvs-side-effect: When GPIO-DVS mode is used for
+  multiple bucks, changing the voltage value of one of the bucks may affect
+  that of another buck, which is the side effect of the change (set_voltage).
+  Use this property to ignore such side effects and change the voltage.
+
+- max8997,pmic-buck125-default-dvs-idx: Default voltage setting selected from
+  the possible 8 options selectable by the dvs gpios. The value of this
+  property should be between 0 and 7. If not specified or if out of range, the
+  default value of this property is set to 0.
+
+- max8997,pmic-buck125-dvs-gpios: GPIO specifiers for three host gpio's used
+  for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of max8997 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+	regulator_name {
+		standard regulator bindings here
+	};
+
+The following are the names of the regulators that the max8997 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of max8997.
+
+	- LDOn
+		  - valid values for n are 1 to 18 and 21
+		  - Example: LDO0, LD01, LDO2, LDO21
+	- BUCKn
+		  - valid values for n are 1 to 7.
+		  - Example: BUCK1, BUCK2, BUCK3, BUCK7
+
+	- ENVICHG: Battery Charging Current Monitor Output. This is a fixed
+		   voltage type regulator
+
+	- ESAFEOUT1: (ldo19)
+	- ESAFEOUT2: (ld020)
+
+	- CHARGER_CV: main battery charger voltage control
+	- CHARGER: main battery charger current control
+	- CHARGER_TOPOFF: end of charge current threshold level
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		interrupt-parent = <&wakeup_eint>;
+		reg = <0x66>;
+		interrupts = <4 0>, <3 0>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
+						 <&gpx0 1 1 0 0>, /* SET2 */
+						 <&gpx0 2 1 0 0>; /* SET3 */
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1000000>, <1000000>,
+						 <1000000>, <1000000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_ARM_1.2V";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};

Documentation/devicetree/bindings/regulator/vexpress.txt

@@ -0,0 +1,32 @@
+Versatile Express voltage regulators
+------------------------------------
+
+Requires node properties:
+- "compatible" value: "arm,vexpress-volt"
+- "arm,vexpress-sysreg,func" when controlled via vexpress-sysreg
+  (see Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+  for more details)
+
+Required regulator properties:
+- "regulator-name"
+- "regulator-always-on"
+
+Optional regulator properties:
+- "regulator-min-microvolt"
+- "regulator-max-microvolt"
+
+See Documentation/devicetree/bindings/regulator/regulator.txt
+for more details about the regulator properties.
+
+When no "regulator-[min|max]-microvolt" properties are defined,
+the device is treated as fixed (or rather "read-only") regulator.
+
+Example:
+	volt@0 {
+		compatible = "arm,vexpress-volt";
+		arm,vexpress-sysreg,func = <2 0>;
+		regulator-name = "Cores";
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-always-on;
+	};

drivers/mfd/Kconfig

@@ -211,7 +211,6 @@ config MFD_TPS6586X
 	depends on I2C=y && GENERIC_HARDIRQS
 	select MFD_CORE
 	select REGMAP_I2C
-	depends on REGULATOR
 	help
 	  If you say yes here you get support for the TPS6586X series of
 	  Power Management chips.

drivers/mfd/max8997.c

@@ -21,8 +21,10 @@
  * This driver is based on max8998.c
  */
 
+#include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/of_irq.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>
 #include <linux/module.h>
@@ -47,6 +49,13 @@ static struct mfd_cell max8997_devs[] = {
 	{ .name = "max8997-led", .id = 2 },
 };
 
+#ifdef CONFIG_OF
+static struct of_device_id __devinitdata max8997_pmic_dt_match[] = {
+	{ .compatible = "maxim,max8997-pmic", .data = TYPE_MAX8997 },
+	{},
+};
+#endif
+
 int max8997_read_reg(struct i2c_client *i2c, u8 reg, u8 *dest)
 {
 	struct max8997_dev *max8997 = i2c_get_clientdata(i2c);
@@ -123,6 +132,58 @@ int max8997_update_reg(struct i2c_client *i2c, u8 reg, u8 val, u8 mask)
 }
 EXPORT_SYMBOL_GPL(max8997_update_reg);
 
+#ifdef CONFIG_OF
+/*
+ * Only the common platform data elements for max8997 are parsed here from the
+ * device tree. Other sub-modules of max8997 such as pmic, rtc and others have
+ * to parse their own platform data elements from device tree.
+ *
+ * The max8997 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
+					struct device *dev)
+{
+	struct max8997_platform_data *pd;
+
+	pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd) {
+		dev_err(dev, "could not allocate memory for pdata\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pd->ono = irq_of_parse_and_map(dev->of_node, 1);
+
+	/*
+	 * ToDo: the 'wakeup' member in the platform data is more of a linux
+	 * specfic information. Hence, there is no binding for that yet and
+	 * not parsed here.
+	 */
+
+	return pd;
+}
+#else
+static struct max8997_platform_data *max8997_i2c_parse_dt_pdata(
+					struct device *dev)
+{
+	return 0;
+}
+#endif
+
+static inline int max8997_i2c_get_driver_data(struct i2c_client *i2c,
+						const struct i2c_device_id *id)
+{
+#ifdef CONFIG_OF
+	if (i2c->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(max8997_pmic_dt_match, i2c->dev.of_node);
+		return (int)match->data;
+	}
+#endif
+	return (int)id->driver_data;
+}
+
 static int max8997_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -137,12 +198,21 @@ static int max8997_i2c_probe(struct i2c_client *i2c,
 	i2c_set_clientdata(i2c, max8997);
 	max8997->dev = &i2c->dev;
 	max8997->i2c = i2c;
-	max8997->type = id->driver_data;
+	max8997->type = max8997_i2c_get_driver_data(i2c, id);
 	max8997->irq = i2c->irq;
 
+	if (max8997->dev->of_node) {
+		pdata = max8997_i2c_parse_dt_pdata(max8997->dev);
+		if (IS_ERR(pdata)) {
+			ret = PTR_ERR(pdata);
+			goto err;
+		}
+	}
+
 	if (!pdata)
 		goto err;
 
+	max8997->pdata = pdata;
 	max8997->ono = pdata->ono;
 
 	mutex_init(&max8997->iolock);
@@ -434,6 +504,7 @@ static struct i2c_driver max8997_i2c_driver = {
 		   .name = "max8997",
 		   .owner = THIS_MODULE,
 		   .pm = &max8997_pm,
+		   .of_match_table = of_match_ptr(max8997_pmic_dt_match),
 	},
 	.probe = max8997_i2c_probe,
 	.remove = max8997_i2c_remove,

drivers/mfd/tps6586x.c

@@ -24,8 +24,6 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/regmap.h>
-#include <linux/regulator/of_regulator.h>
-#include <linux/regulator/machine.h>
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
@@ -98,6 +96,9 @@ static struct mfd_cell tps6586x_cell[] = {
 	{
 		.name = "tps6586x-gpio",
 	},
+	{
+		.name = "tps6586x-pmic",
+	},
 	{
 		.name = "tps6586x-rtc",
 	},
@@ -350,80 +351,19 @@ failed:
 }
 
 #ifdef CONFIG_OF
-static struct of_regulator_match tps6586x_matches[] = {
-	{ .name = "sys",     .driver_data = (void *)TPS6586X_ID_SYS     },
-	{ .name = "sm0",     .driver_data = (void *)TPS6586X_ID_SM_0    },
-	{ .name = "sm1",     .driver_data = (void *)TPS6586X_ID_SM_1    },
-	{ .name = "sm2",     .driver_data = (void *)TPS6586X_ID_SM_2    },
-	{ .name = "ldo0",    .driver_data = (void *)TPS6586X_ID_LDO_0   },
-	{ .name = "ldo1",    .driver_data = (void *)TPS6586X_ID_LDO_1   },
-	{ .name = "ldo2",    .driver_data = (void *)TPS6586X_ID_LDO_2   },
-	{ .name = "ldo3",    .driver_data = (void *)TPS6586X_ID_LDO_3   },
-	{ .name = "ldo4",    .driver_data = (void *)TPS6586X_ID_LDO_4   },
-	{ .name = "ldo5",    .driver_data = (void *)TPS6586X_ID_LDO_5   },
-	{ .name = "ldo6",    .driver_data = (void *)TPS6586X_ID_LDO_6   },
-	{ .name = "ldo7",    .driver_data = (void *)TPS6586X_ID_LDO_7   },
-	{ .name = "ldo8",    .driver_data = (void *)TPS6586X_ID_LDO_8   },
-	{ .name = "ldo9",    .driver_data = (void *)TPS6586X_ID_LDO_9   },
-	{ .name = "ldo_rtc", .driver_data = (void *)TPS6586X_ID_LDO_RTC },
-};
-
 static struct tps6586x_platform_data *tps6586x_parse_dt(struct i2c_client *client)
 {
-	const unsigned int num = ARRAY_SIZE(tps6586x_matches);
 	struct device_node *np = client->dev.of_node;
 	struct tps6586x_platform_data *pdata;
-	struct tps6586x_subdev_info *devs;
-	struct device_node *regs;
-	const char *sys_rail_name = NULL;
-	unsigned int count;
-	unsigned int i, j;
-	int err;
-
-	regs = of_find_node_by_name(np, "regulators");
-	if (!regs)
-		return NULL;
-
-	err = of_regulator_match(&client->dev, regs, tps6586x_matches, num);
-	if (err < 0) {
-		of_node_put(regs);
-		return NULL;
-	}
-
-	of_node_put(regs);
-	count = err;
-
-	devs = devm_kzalloc(&client->dev, count * sizeof(*devs), GFP_KERNEL);
-	if (!devs)
-		return NULL;
-
-	for (i = 0, j = 0; i < num && j < count; i++) {
-		struct regulator_init_data *reg_idata;
-
-		if (!tps6586x_matches[i].init_data)
-			continue;
-
-		reg_idata  = tps6586x_matches[i].init_data;
-		devs[j].name = "tps6586x-regulator";
-		devs[j].platform_data = tps6586x_matches[i].init_data;
-		devs[j].id = (int)tps6586x_matches[i].driver_data;
-		if (devs[j].id == TPS6586X_ID_SYS)
-			sys_rail_name = reg_idata->constraints.name;
-
-		if ((devs[j].id == TPS6586X_ID_LDO_5) ||
-			(devs[j].id == TPS6586X_ID_LDO_RTC))
-			reg_idata->supply_regulator = sys_rail_name;
-
-		devs[j].of_node = tps6586x_matches[i].of_node;
-		j++;
-	}
 
 	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
+	if (!pdata) {
+		dev_err(&client->dev, "Memory allocation failed\n");
 		return NULL;
+	}
 
-	pdata->num_subdevs = count;
-	pdata->subdevs = devs;
+	pdata->num_subdevs = 0;
+	pdata->subdevs = NULL;
 	pdata->gpio_base = -1;
 	pdata->irq_base = -1;
 	pdata->pm_off = of_property_read_bool(np, "ti,system-power-controller");

drivers/mfd/wm5102-tables.c

@@ -258,6 +258,7 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000154, 0x0000 },   /* R340   - Rate Estimator 3 */ 
 	{ 0x00000155, 0x0000 },   /* R341   - Rate Estimator 4 */ 
 	{ 0x00000156, 0x0000 },   /* R342   - Rate Estimator 5 */ 
+	{ 0x00000161, 0x0000 },   /* R353   - Dynamic Frequency Scaling 1 */ 
 	{ 0x00000171, 0x0000 },   /* R369   - FLL1 Control 1 */ 
 	{ 0x00000172, 0x0008 },   /* R370   - FLL1 Control 2 */ 
 	{ 0x00000173, 0x0018 },   /* R371   - FLL1 Control 3 */ 
@@ -1047,6 +1048,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_RATE_ESTIMATOR_3:
 	case ARIZONA_RATE_ESTIMATOR_4:
 	case ARIZONA_RATE_ESTIMATOR_5:
+	case ARIZONA_DYNAMIC_FREQUENCY_SCALING_1:
 	case ARIZONA_FLL1_CONTROL_1:
 	case ARIZONA_FLL1_CONTROL_2:
 	case ARIZONA_FLL1_CONTROL_3:
@@ -1079,6 +1081,7 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_FLL2_GPIO_CLOCK:
 	case ARIZONA_MIC_CHARGE_PUMP_1:
 	case ARIZONA_LDO1_CONTROL_1:
+	case ARIZONA_LDO1_CONTROL_2:
 	case ARIZONA_LDO2_CONTROL_1:
 	case ARIZONA_MIC_BIAS_CTRL_1:
 	case ARIZONA_MIC_BIAS_CTRL_2:

drivers/regulator/88pm8607.c

@@ -394,7 +394,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev,
 #define pm8607_regulator_dt_init(x, y, z)	(-1)
 #endif
 
-static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
+static int pm8607_regulator_probe(struct platform_device *pdev)
 {
 	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct pm8607_regulator_info *info = NULL;
@@ -454,7 +454,7 @@ static int __devinit pm8607_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit pm8607_regulator_remove(struct platform_device *pdev)
+static int pm8607_regulator_remove(struct platform_device *pdev)
 {
 	struct pm8607_regulator_info *info = platform_get_drvdata(pdev);
 
@@ -481,7 +481,7 @@ static struct platform_driver pm8607_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= pm8607_regulator_probe,
-	.remove		= __devexit_p(pm8607_regulator_remove),
+	.remove		= pm8607_regulator_remove,
 	.id_table	= pm8607_regulator_driver_ids,
 };
 

drivers/regulator/Kconfig

@@ -109,6 +109,16 @@ config REGULATOR_DA9052
 	  This driver supports the voltage regulators of DA9052-BC and
 	  DA9053-AA/Bx PMIC.
 
+config REGULATOR_DA9055
+	tristate "Dialog Semiconductor DA9055 regulators"
+	depends on MFD_DA9055
+	help
+	  Say y here to support the BUCKs and LDOs regulators found on
+	  Dialog Semiconductor DA9055 PMIC.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called da9055-regulator.
+
 config REGULATOR_FAN53555
 	tristate "Fairchild FAN53555 Regulator"
 	depends on I2C
@@ -204,6 +214,16 @@ config REGULATOR_MAX8952
 	  via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
 	  modes ranging from 0.77V to 1.40V by 0.01V steps.
 
+config REGULATOR_MAX8973
+	tristate "Maxim MAX8973 voltage regulator "
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
+	  switching regulator delievers up to 9A of output current. Each
+	  phase operates at a 2MHz fixed frequency with a 120 deg shift
+	  from the adjacent phase, allowing the use of small magnetic component.
+
 config REGULATOR_MAX8997
 	tristate "Maxim 8997/8966 regulator"
 	depends on MFD_MAX8997
@@ -335,6 +355,17 @@ config REGULATOR_PALMAS
 	  on the muxing. This is handled automatically in the driver by
 	  reading the mux info from OTP.
 
+config REGULATOR_TPS51632
+	tristate "TI TPS51632 Power Regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  This driver supports TPS51632 voltage regulator chip.
+	  The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
+	  with Serial VID control and DVFS.
+	  The voltage output can be configure through I2C interface or PWM
+	  interface.
+
 config REGULATOR_TPS6105X
 	tristate "TI TPS6105X Power regulators"
 	depends on TPS6105X
@@ -415,6 +446,15 @@ config REGULATOR_TPS65912
 	help
 	    This driver supports TPS65912 voltage regulator chip.
 
+config REGULATOR_TPS80031
+	tristate "TI TPS80031/TPS80032 power regualtor driver"
+	depends on MFD_TPS80031
+	help
+	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
+	  Path and Battery Charger. It has 5 configurable step-down
+	  converters, 11 general purpose LDOs, VBUS generator and digital
+	  output to control regulators.
+
 config REGULATOR_TWL4030
 	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
 	depends on TWL4030_CORE
@@ -422,6 +462,13 @@ config REGULATOR_TWL4030
 	  This driver supports the voltage regulators provided by
 	  this family of companion chips.
 
+config REGULATOR_VEXPRESS
+	tristate "Versatile Express regulators"
+	depends on VEXPRESS_CONFIG
+	help
+	  This driver provides support for voltage regulators available
+	  on the ARM Ltd's Versatile Express platform.
+
 config REGULATOR_WM831X
 	tristate "Wolfson Microelectronics WM831x PMIC regulators"
 	depends on MFD_WM831X
@@ -450,5 +497,12 @@ config REGULATOR_WM8994
 	  This driver provides support for the voltage regulators on the
 	  WM8994 CODEC.
 
+config REGULATOR_AS3711
+	tristate "AS3711 PMIC"
+	depends on MFD_AS3711
+	help
+	  This driver provides support for the voltage regulators on the
+	  AS3711 PMIC
+
 endif
 

drivers/regulator/Makefile

@@ -16,8 +16,10 @@ obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500.o
 obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
 obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
 obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
+obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
+obj-$(CONFIG_REGULATOR_DA9055)	+= da9055-regulator.o
 obj-$(CONFIG_REGULATOR_DBX500_PRCMU) += dbx500-prcmu.o
 obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o
 obj-$(CONFIG_REGULATOR_FAN53555) += fan53555.o
@@ -34,6 +36,7 @@ obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
 obj-$(CONFIG_REGULATOR_MAX8907) += max8907-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o
+obj-$(CONFIG_REGULATOR_MAX8973) += max8973-regulator.o
 obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o
 obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o
 obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o
@@ -41,6 +44,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
+obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PCAP) += pcap-regulator.o
 obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 obj-$(CONFIG_REGULATOR_RC5T583)  += rc5t583-regulator.o
@@ -56,7 +60,9 @@ obj-$(CONFIG_REGULATOR_TPS6524X) += tps6524x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6586X) += tps6586x-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o
 obj-$(CONFIG_REGULATOR_TPS65912) += tps65912-regulator.o
+obj-$(CONFIG_REGULATOR_TPS80031) += tps80031-regulator.o
 obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
+obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o

drivers/regulator/aat2870-regulator.c

@@ -187,7 +187,7 @@ static int aat2870_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit aat2870_regulator_remove(struct platform_device *pdev)
+static int aat2870_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
@@ -201,7 +201,7 @@ static struct platform_driver aat2870_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe	= aat2870_regulator_probe,
-	.remove	= __devexit_p(aat2870_regulator_remove),
+	.remove	= aat2870_regulator_remove,
 };
 
 static int __init aat2870_regulator_init(void)

drivers/regulator/ab3100.c

@@ -494,7 +494,7 @@ ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
  * for all the different regulators.
  */
 
-static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
+static int ab3100_regulators_probe(struct platform_device *pdev)
 {
 	struct ab3100_platform_data *plfdata = pdev->dev.platform_data;
 	struct regulator_config config = { };
@@ -571,7 +571,7 @@ static int __devinit ab3100_regulators_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit ab3100_regulators_remove(struct platform_device *pdev)
+static int ab3100_regulators_remove(struct platform_device *pdev)
 {
 	int i;
 
@@ -589,7 +589,7 @@ static struct platform_driver ab3100_regulators_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = ab3100_regulators_probe,
-	.remove = __devexit_p(ab3100_regulators_remove),
+	.remove = ab3100_regulators_remove,
 };
 
 static __init int ab3100_regulators_init(void)

drivers/regulator/ab8500.c

@@ -641,7 +641,7 @@ static struct ab8500_reg_init ab8500_reg_init[] = {
 	REG_INIT(AB8500_REGUCTRLDISCH2,		0x04, 0x44, 0x16),
 };
 
-static __devinit int
+static int
 ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value)
 {
 	int err;
@@ -676,7 +676,7 @@ ab8500_regulator_init_registers(struct platform_device *pdev, int id, int value)
 	return 0;
 }
 
-static __devinit int ab8500_regulator_register(struct platform_device *pdev,
+static int ab8500_regulator_register(struct platform_device *pdev,
 					struct regulator_init_data *init_data,
 					int id,
 					struct device_node *np)
@@ -735,7 +735,7 @@ static struct of_regulator_match ab8500_regulator_matches[] = {
 	{ .name	= "ab8500_ldo_ana",     .driver_data = (void *) AB8500_LDO_ANA, },
 };
 
-static __devinit int
+static int
 ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
 {
 	int err, i;
@@ -751,7 +751,7 @@ ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
 	return 0;
 }
 
-static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
+static int ab8500_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
 	struct ab8500_platform_data *pdata;
@@ -817,7 +817,7 @@ static __devinit int ab8500_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
+static int ab8500_regulator_remove(struct platform_device *pdev)
 {
 	int i;
 
@@ -836,7 +836,7 @@ static __devexit int ab8500_regulator_remove(struct platform_device *pdev)
 
 static struct platform_driver ab8500_regulator_driver = {
 	.probe = ab8500_regulator_probe,
-	.remove = __devexit_p(ab8500_regulator_remove),
+	.remove = ab8500_regulator_remove,
 	.driver         = {
 		.name   = "ab8500-regulator",
 		.owner  = THIS_MODULE,

drivers/regulator/ad5398.c

@@ -211,7 +211,7 @@ static const struct i2c_device_id ad5398_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ad5398_id);
 
-static int __devinit ad5398_probe(struct i2c_client *client,
+static int ad5398_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct regulator_init_data *init_data = client->dev.platform_data;
@@ -256,7 +256,7 @@ err:
 	return ret;
 }
 
-static int __devexit ad5398_remove(struct i2c_client *client)
+static int ad5398_remove(struct i2c_client *client)
 {
 	struct ad5398_chip_info *chip = i2c_get_clientdata(client);
 
@@ -266,7 +266,7 @@ static int __devexit ad5398_remove(struct i2c_client *client)
 
 static struct i2c_driver ad5398_driver = {
 	.probe = ad5398_probe,
-	.remove = __devexit_p(ad5398_remove),
+	.remove = ad5398_remove,
 	.driver		= {
 		.name	= "ad5398",
 	},

drivers/regulator/anatop-regulator.c

@@ -48,36 +48,21 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg,
 					unsigned selector)
 {
 	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-	u32 val, mask;
 
 	if (!anatop_reg->control_reg)
 		return -ENOTSUPP;
 
-	val = anatop_reg->min_bit_val + selector;
-	dev_dbg(&reg->dev, "%s: calculated val %d\n", __func__, val);
-	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
-		anatop_reg->vol_bit_shift;
-	val <<= anatop_reg->vol_bit_shift;
-	regmap_update_bits(anatop_reg->anatop, anatop_reg->control_reg,
-				mask, val);
-
-	return 0;
+	return regulator_set_voltage_sel_regmap(reg, selector);
 }
 
 static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg)
 {
 	struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg);
-	u32 val, mask;
 
 	if (!anatop_reg->control_reg)
 		return -ENOTSUPP;
 
-	regmap_read(anatop_reg->anatop, anatop_reg->control_reg, &val);
-	mask = ((1 << anatop_reg->vol_bit_width) - 1) <<
-		anatop_reg->vol_bit_shift;
-	val = (val & mask) >> anatop_reg->vol_bit_shift;
-
-	return val - anatop_reg->min_bit_val;
+	return regulator_get_voltage_sel_regmap(reg);
 }
 
 static struct regulator_ops anatop_rops = {
@@ -87,7 +72,7 @@ static struct regulator_ops anatop_rops = {
 	.map_voltage = regulator_map_voltage_linear,
 };
 
-static int __devinit anatop_regulator_probe(struct platform_device *pdev)
+static int anatop_regulator_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
@@ -158,15 +143,20 @@ static int __devinit anatop_regulator_probe(struct platform_device *pdev)
 		goto anatop_probe_end;
 	}
 
-	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage)
-		/ 25000 + 1;
+	rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1
+			    + sreg->min_bit_val;
 	rdesc->min_uV = sreg->min_voltage;
 	rdesc->uV_step = 25000;
+	rdesc->linear_min_sel = sreg->min_bit_val;
+	rdesc->vsel_reg = sreg->control_reg;
+	rdesc->vsel_mask = ((1 << sreg->vol_bit_width) - 1) <<
+			   sreg->vol_bit_shift;
 
 	config.dev = &pdev->dev;
 	config.init_data = initdata;
 	config.driver_data = sreg;
 	config.of_node = pdev->dev.of_node;
+	config.regmap = sreg->anatop;
 
 	/* register regulator */
 	rdev = regulator_register(rdesc, &config);
@@ -186,7 +176,7 @@ anatop_probe_end:
 	return ret;
 }
 
-static int __devexit anatop_regulator_remove(struct platform_device *pdev)
+static int anatop_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 	struct anatop_regulator *sreg = rdev_get_drvdata(rdev);
@@ -210,7 +200,7 @@ static struct platform_driver anatop_regulator_driver = {
 		.of_match_table = of_anatop_regulator_match_tbl,
 	},
 	.probe	= anatop_regulator_probe,
-	.remove	= __devexit_p(anatop_regulator_remove),
+	.remove	= anatop_regulator_remove,
 };
 
 static int __init anatop_regulator_init(void)

drivers/regulator/arizona-ldo1.c

@@ -34,6 +34,108 @@ struct arizona_ldo1 {
 	struct regulator_init_data init_data;
 };
 
+static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
+					unsigned int selector)
+{
+	if (selector >= rdev->desc->n_voltages)
+		return -EINVAL;
+
+	if (selector == rdev->desc->n_voltages - 1)
+		return 1800000;
+	else
+		return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
+}
+
+static int arizona_ldo1_hc_map_voltage(struct regulator_dev *rdev,
+				       int min_uV, int max_uV)
+{
+	int sel;
+
+	sel = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
+	if (sel >= rdev->desc->n_voltages)
+		sel = rdev->desc->n_voltages - 1;
+
+	return sel;
+}
+
+static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
+					   unsigned sel)
+{
+	struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
+	struct regmap *regmap = ldo->arizona->regmap;
+	unsigned int val;
+	int ret;
+
+	if (sel == rdev->desc->n_voltages - 1)
+		val = ARIZONA_LDO1_HI_PWR;
+	else
+		val = 0;
+
+	ret = regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_2,
+				 ARIZONA_LDO1_HI_PWR, val);
+	if (ret != 0)
+		return ret;
+
+	ret = regmap_update_bits(regmap, ARIZONA_DYNAMIC_FREQUENCY_SCALING_1,
+				 ARIZONA_SUBSYS_MAX_FREQ, val);
+	if (ret != 0)
+		return ret;
+
+	if (val)
+		return 0;
+
+	val = sel << ARIZONA_LDO1_VSEL_SHIFT;
+
+	return regmap_update_bits(regmap, ARIZONA_LDO1_CONTROL_1,
+				  ARIZONA_LDO1_VSEL_MASK, val);
+}
+
+static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct arizona_ldo1 *ldo = rdev_get_drvdata(rdev);
+	struct regmap *regmap = ldo->arizona->regmap;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_2, &val);
+	if (ret != 0)
+		return ret;
+
+	if (val & ARIZONA_LDO1_HI_PWR)
+		return rdev->desc->n_voltages - 1;
+
+	ret = regmap_read(regmap, ARIZONA_LDO1_CONTROL_1, &val);
+	if (ret != 0)
+		return ret;
+
+	return (val & ARIZONA_LDO1_VSEL_MASK) >> ARIZONA_LDO1_VSEL_SHIFT;
+}
+
+static struct regulator_ops arizona_ldo1_hc_ops = {
+	.list_voltage = arizona_ldo1_hc_list_voltage,
+	.map_voltage = arizona_ldo1_hc_map_voltage,
+	.get_voltage_sel = arizona_ldo1_hc_get_voltage_sel,
+	.set_voltage_sel = arizona_ldo1_hc_set_voltage_sel,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+};
+
+static const struct regulator_desc arizona_ldo1_hc = {
+	.name = "LDO1",
+	.supply_name = "LDOVDD",
+	.type = REGULATOR_VOLTAGE,
+	.ops = &arizona_ldo1_hc_ops,
+
+	.bypass_reg = ARIZONA_LDO1_CONTROL_1,
+	.bypass_mask = ARIZONA_LDO1_BYPASS,
+	.min_uV = 900000,
+	.uV_step = 50000,
+	.n_voltages = 8,
+	.enable_time = 500,
+
+	.owner = THIS_MODULE,
+};
+
 static struct regulator_ops arizona_ldo1_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
@@ -55,11 +157,22 @@ static const struct regulator_desc arizona_ldo1 = {
 	.bypass_mask = ARIZONA_LDO1_BYPASS,
 	.min_uV = 900000,
 	.uV_step = 50000,
-	.n_voltages = 6,
+	.n_voltages = 7,
+	.enable_time = 500,
 
 	.owner = THIS_MODULE,
 };
 
+static const struct regulator_init_data arizona_ldo1_dvfs = {
+	.constraints = {
+		.min_uV = 1200000,
+		.max_uV = 1800000,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
+				  REGULATOR_CHANGE_VOLTAGE,
+	},
+	.num_consumer_supplies = 1,
+};
+
 static const struct regulator_init_data arizona_ldo1_default = {
 	.constraints = {
 		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -67,9 +180,10 @@ static const struct regulator_init_data arizona_ldo1_default = {
 	.num_consumer_supplies = 1,
 };
 
-static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
+static int arizona_ldo1_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
+	const struct regulator_desc *desc;
 	struct regulator_config config = { };
 	struct arizona_ldo1 *ldo1;
 	int ret;
@@ -87,7 +201,17 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
 	 * default init_data for it.  This will be overridden with
 	 * platform data if provided.
 	 */
-	ldo1->init_data = arizona_ldo1_default;
+	switch (arizona->type) {
+	case WM5102:
+		desc = &arizona_ldo1_hc;
+		ldo1->init_data = arizona_ldo1_dvfs;
+		break;
+	default:
+		desc = &arizona_ldo1;
+		ldo1->init_data = arizona_ldo1_default;
+		break;
+	}
+
 	ldo1->init_data.consumer_supplies = &ldo1->supply;
 	ldo1->supply.supply = "DCVDD";
 	ldo1->supply.dev_name = dev_name(arizona->dev);
@@ -102,7 +226,7 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
 	else
 		config.init_data = &ldo1->init_data;
 
-	ldo1->regulator = regulator_register(&arizona_ldo1, &config);
+	ldo1->regulator = regulator_register(desc, &config);
 	if (IS_ERR(ldo1->regulator)) {
 		ret = PTR_ERR(ldo1->regulator);
 		dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
@@ -115,7 +239,7 @@ static __devinit int arizona_ldo1_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static __devexit int arizona_ldo1_remove(struct platform_device *pdev)
+static int arizona_ldo1_remove(struct platform_device *pdev)
 {
 	struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
 
@@ -126,7 +250,7 @@ static __devexit int arizona_ldo1_remove(struct platform_device *pdev)
 
 static struct platform_driver arizona_ldo1_driver = {
 	.probe = arizona_ldo1_probe,
-	.remove = __devexit_p(arizona_ldo1_remove),
+	.remove = arizona_ldo1_remove,
 	.driver		= {
 		.name	= "arizona-ldo1",
 		.owner	= THIS_MODULE,

drivers/regulator/arizona-micsupp.c

@@ -101,6 +101,8 @@ static const struct regulator_desc arizona_micsupp = {
 	.bypass_reg = ARIZONA_MIC_CHARGE_PUMP_1,
 	.bypass_mask = ARIZONA_CPMIC_BYPASS,
 
+	.enable_time = 3000,
+
 	.owner = THIS_MODULE,
 };
 
@@ -115,7 +117,7 @@ static const struct regulator_init_data arizona_micsupp_default = {
 	.num_consumer_supplies = 1,
 };
 
-static __devinit int arizona_micsupp_probe(struct platform_device *pdev)
+static int arizona_micsupp_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
@@ -166,7 +168,7 @@ static __devinit int arizona_micsupp_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static __devexit int arizona_micsupp_remove(struct platform_device *pdev)
+static int arizona_micsupp_remove(struct platform_device *pdev)
 {
 	struct arizona_micsupp *micsupp = platform_get_drvdata(pdev);
 
@@ -177,7 +179,7 @@ static __devexit int arizona_micsupp_remove(struct platform_device *pdev)
 
 static struct platform_driver arizona_micsupp_driver = {
 	.probe = arizona_micsupp_probe,
-	.remove = __devexit_p(arizona_micsupp_remove),
+	.remove = arizona_micsupp_remove,
 	.driver		= {
 		.name	= "arizona-micsupp",
 		.owner	= THIS_MODULE,

drivers/regulator/as3711-regulator.c

@@ -0,0 +1,369 @@
+/*
+ * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies
+ *
+ * Copyright (C) 2012 Renesas Electronics Corporation
+ * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the version 2 of the GNU General Public License as
+ * published by the Free Software Foundation
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/as3711.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/slab.h>
+
+struct as3711_regulator_info {
+	struct regulator_desc	desc;
+	unsigned int		max_uV;
+};
+
+struct as3711_regulator {
+	struct as3711_regulator_info *reg_info;
+	struct regulator_dev *rdev;
+};
+
+static int as3711_list_voltage_sd(struct regulator_dev *rdev,
+				  unsigned int selector)
+{
+	if (selector >= rdev->desc->n_voltages)
+		return -EINVAL;
+
+	if (!selector)
+		return 0;
+	if (selector < 0x41)
+		return 600000 + selector * 12500;
+	if (selector < 0x71)
+		return 1400000 + (selector - 0x40) * 25000;
+	return 2600000 + (selector - 0x70) * 50000;
+}
+
+static int as3711_list_voltage_aldo(struct regulator_dev *rdev,
+				    unsigned int selector)
+{
+	if (selector >= rdev->desc->n_voltages)
+		return -EINVAL;
+
+	if (selector < 0x10)
+		return 1200000 + selector * 50000;
+	return 1800000 + (selector - 0x10) * 100000;
+}
+
+static int as3711_list_voltage_dldo(struct regulator_dev *rdev,
+				    unsigned int selector)
+{
+	if (selector >= rdev->desc->n_voltages ||
+	    (selector > 0x10 && selector < 0x20))
+		return -EINVAL;
+
+	if (selector < 0x11)
+		return 900000 + selector * 50000;
+	return 1750000 + (selector - 0x20) * 50000;
+}
+
+static int as3711_bound_check(struct regulator_dev *rdev,
+			      int *min_uV, int *max_uV)
+{
+	struct as3711_regulator *reg = rdev_get_drvdata(rdev);
+	struct as3711_regulator_info *info = reg->reg_info;
+
+	dev_dbg(&rdev->dev, "%s(), %d, %d, %d\n", __func__,
+		*min_uV, rdev->desc->min_uV, info->max_uV);
+
+	if (*max_uV < *min_uV ||
+	    *min_uV > info->max_uV || rdev->desc->min_uV > *max_uV)
+		return -EINVAL;
+
+	if (rdev->desc->n_voltages == 1)
+		return 0;
+
+	if (*max_uV > info->max_uV)
+		*max_uV = info->max_uV;
+
+	if (*min_uV < rdev->desc->min_uV)
+		*min_uV = rdev->desc->min_uV;
+
+	return *min_uV;
+}
+
+static int as3711_sel_check(int min, int max, int bottom, int step)
+{
+	int sel, voltage;
+
+	/* Round up min, when dividing: keeps us within the range */
+	sel = DIV_ROUND_UP(min - bottom, step);
+	voltage = sel * step + bottom;
+	pr_debug("%s(): select %d..%d in %d+N*%d: %d\n", __func__,
+	       min, max, bottom, step, sel);
+	if (voltage > max)
+		return -EINVAL;
+
+	return sel;
+}
+
+static int as3711_map_voltage_sd(struct regulator_dev *rdev,
+				 int min_uV, int max_uV)
+{
+	int ret;
+
+	ret = as3711_bound_check(rdev, &min_uV, &max_uV);
+	if (ret <= 0)
+		return ret;
+
+	if (min_uV <= 1400000)
+		return as3711_sel_check(min_uV, max_uV, 600000, 12500);
+
+	if (min_uV <= 2600000)
+		return as3711_sel_check(min_uV, max_uV, 1400000, 25000) + 0x40;
+
+	return as3711_sel_check(min_uV, max_uV, 2600000, 50000) + 0x70;
+}
+
+/*
+ * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and
+ * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes:
+ * FAST:	sdX_fast=1
+ * NORMAL:	low_noise=1
+ * IDLE:	low_noise=0
+ */
+
+static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode)
+{
+	unsigned int fast_bit = rdev->desc->enable_mask,
+		low_noise_bit = fast_bit << 4;
+	u8 val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = fast_bit | low_noise_bit;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = low_noise_bit;
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1,
+				  low_noise_bit | fast_bit, val);
+}
+
+static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev)
+{
+	unsigned int fast_bit = rdev->desc->enable_mask,
+		low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit;
+	unsigned int val;
+	int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val);
+
+	if (ret < 0)
+		return ret;
+
+	if ((val & mask) == mask)
+		return REGULATOR_MODE_FAST;
+
+	if ((val & mask) == low_noise_bit)
+		return REGULATOR_MODE_NORMAL;
+
+	if (!(val & mask))
+		return REGULATOR_MODE_IDLE;
+
+	return -EINVAL;
+}
+
+static int as3711_map_voltage_aldo(struct regulator_dev *rdev,
+				  int min_uV, int max_uV)
+{
+	int ret;
+
+	ret = as3711_bound_check(rdev, &min_uV, &max_uV);
+	if (ret <= 0)
+		return ret;
+
+	if (min_uV <= 1800000)
+		return as3711_sel_check(min_uV, max_uV, 1200000, 50000);
+
+	return as3711_sel_check(min_uV, max_uV, 1800000, 100000) + 0x10;
+}
+
+static int as3711_map_voltage_dldo(struct regulator_dev *rdev,
+				  int min_uV, int max_uV)
+{
+	int ret;
+
+	ret = as3711_bound_check(rdev, &min_uV, &max_uV);
+	if (ret <= 0)
+		return ret;
+
+	if (min_uV <= 1700000)
+		return as3711_sel_check(min_uV, max_uV, 900000, 50000);
+
+	return as3711_sel_check(min_uV, max_uV, 1750000, 50000) + 0x20;
+}
+
+static struct regulator_ops as3711_sd_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= as3711_list_voltage_sd,
+	.map_voltage		= as3711_map_voltage_sd,
+	.get_mode		= as3711_get_mode_sd,
+	.set_mode		= as3711_set_mode_sd,
+};
+
+static struct regulator_ops as3711_aldo_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= as3711_list_voltage_aldo,
+	.map_voltage		= as3711_map_voltage_aldo,
+};
+
+static struct regulator_ops as3711_dldo_ops = {
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= as3711_list_voltage_dldo,
+	.map_voltage		= as3711_map_voltage_dldo,
+};
+
+#define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx)	\
+	[AS3711_REGULATOR_ ## _id] = {							\
+	.desc = {									\
+		.name = "as3711-regulator-" # _id,					\
+		.id = AS3711_REGULATOR_ ## _id,						\
+		.n_voltages = (_vmask + 1),						\
+		.ops = &as3711_ ## _sfx ## _ops,					\
+		.type = REGULATOR_VOLTAGE,						\
+		.owner = THIS_MODULE,							\
+		.vsel_reg = AS3711_ ## _id ## _VOLTAGE,					\
+		.vsel_mask = _vmask << _vshift,						\
+		.enable_reg = AS3711_ ## _en_reg,					\
+		.enable_mask = BIT(_en_bit),						\
+		.min_uV	= _min_uV,							\
+	},										\
+	.max_uV = _max_uV,								\
+}
+
+static struct as3711_regulator_info as3711_reg_info[] = {
+	AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd),
+	AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd),
+	AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd),
+	AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd),
+	AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
+	AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo),
+	AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo),
+	/* StepUp output voltage depends on supplying regulator */
+};
+
+#define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
+
+static int as3711_regulator_probe(struct platform_device *pdev)
+{
+	struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_init_data *reg_data;
+	struct regulator_config config = {.dev = &pdev->dev,};
+	struct as3711_regulator *reg = NULL;
+	struct as3711_regulator *regs;
+	struct regulator_dev *rdev;
+	struct as3711_regulator_info *ri;
+	int ret;
+	int id;
+
+	if (!pdata)
+		dev_dbg(&pdev->dev, "No platform data...\n");
+
+	regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM *
+			sizeof(struct as3711_regulator), GFP_KERNEL);
+	if (!regs) {
+		dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
+		return -ENOMEM;
+	}
+
+	for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) {
+		reg_data = pdata ? pdata->init_data[id] : NULL;
+
+		/* No need to register if there is no regulator data */
+		if (!ri->desc.name)
+			continue;
+
+		reg = &regs[id];
+		reg->reg_info = ri;
+
+		config.init_data = reg_data;
+		config.driver_data = reg;
+		config.regmap = as3711->regmap;
+
+		rdev = regulator_register(&ri->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register regulator %s\n",
+				ri->desc.name);
+			ret = PTR_ERR(rdev);
+			goto eregreg;
+		}
+		reg->rdev = rdev;
+	}
+	platform_set_drvdata(pdev, regs);
+	return 0;
+
+eregreg:
+	while (--id >= 0)
+		regulator_unregister(regs[id].rdev);
+
+	return ret;
+}
+
+static int as3711_regulator_remove(struct platform_device *pdev)
+{
+	struct as3711_regulator *regs = platform_get_drvdata(pdev);
+	int id;
+
+	for (id = 0; id < AS3711_REGULATOR_NUM; ++id)
+		regulator_unregister(regs[id].rdev);
+	return 0;
+}
+
+static struct platform_driver as3711_regulator_driver = {
+	.driver	= {
+		.name	= "as3711-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= as3711_regulator_probe,
+	.remove		= as3711_regulator_remove,
+};
+
+static int __init as3711_regulator_init(void)
+{
+	return platform_driver_register(&as3711_regulator_driver);
+}
+subsys_initcall(as3711_regulator_init);
+
+static void __exit as3711_regulator_exit(void)
+{
+	platform_driver_unregister(&as3711_regulator_driver);
+}
+module_exit(as3711_regulator_exit);
+
+MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
+MODULE_DESCRIPTION("AS3711 regulator driver");
+MODULE_ALIAS("platform:as3711-regulator");
+MODULE_LICENSE("GPL v2");

drivers/regulator/core.c

@@ -199,8 +199,11 @@ static int regulator_check_consumers(struct regulator_dev *rdev,
 			*min_uV = regulator->min_uV;
 	}
 
-	if (*min_uV > *max_uV)
+	if (*min_uV > *max_uV) {
+		dev_err(regulator->dev, "Restricting voltage, %u-%uuV\n",
+			regulator->min_uV, regulator->max_uV);
 		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -880,7 +883,9 @@ static int machine_constraints_voltage(struct regulator_dev *rdev,
 
 		/* final: [min_uV..max_uV] valid iff constraints valid */
 		if (max_uV < min_uV) {
-			rdev_err(rdev, "unsupportable voltage constraints\n");
+			rdev_err(rdev,
+				 "unsupportable voltage constraints %u-%uuV\n",
+				 min_uV, max_uV);
 			return -EINVAL;
 		}
 
@@ -1866,6 +1871,28 @@ int regulator_is_enabled(struct regulator *regulator)
 }
 EXPORT_SYMBOL_GPL(regulator_is_enabled);
 
+/**
+ * regulator_can_change_voltage - check if regulator can change voltage
+ * @regulator: regulator source
+ *
+ * Returns positive if the regulator driver backing the source/client
+ * can change its voltage, false otherwise. Usefull for detecting fixed
+ * or dummy regulators and disabling voltage change logic in the client
+ * driver.
+ */
+int regulator_can_change_voltage(struct regulator *regulator)
+{
+	struct regulator_dev	*rdev = regulator->rdev;
+
+	if (rdev->constraints &&
+	    rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE &&
+	    (rdev->desc->n_voltages - rdev->desc->linear_min_sel) > 1)
+		return 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_can_change_voltage);
+
 /**
  * regulator_count_voltages - count regulator_list_voltage() selectors
  * @regulator: regulator source
@@ -1897,6 +1924,10 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev,
 {
 	if (selector >= rdev->desc->n_voltages)
 		return -EINVAL;
+	if (selector < rdev->desc->linear_min_sel)
+		return 0;
+
+	selector -= rdev->desc->linear_min_sel;
 
 	return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
 }
@@ -1985,6 +2016,11 @@ int regulator_is_supported_voltage(struct regulator *regulator,
 			return ret;
 	}
 
+	/* Any voltage within constrains range is fine? */
+	if (rdev->desc->continuous_voltage_range)
+		return min_uV >= rdev->constraints->min_uV &&
+				max_uV <= rdev->constraints->max_uV;
+
 	ret = regulator_count_voltages(regulator);
 	if (ret < 0)
 		return ret;
@@ -2120,6 +2156,8 @@ int regulator_map_voltage_linear(struct regulator_dev *rdev,
 	if (ret < 0)
 		return ret;
 
+	ret += rdev->desc->linear_min_sel;
+
 	/* Map back into a voltage to verify we're still in bounds */
 	voltage = rdev->desc->ops->list_voltage(rdev, ret);
 	if (voltage < min_uV || voltage > max_uV)

drivers/regulator/da903x.c

@@ -460,7 +460,7 @@ static inline struct da903x_regulator_info *find_regulator_info(int id)
 	return NULL;
 }
 
-static int __devinit da903x_regulator_probe(struct platform_device *pdev)
+static int da903x_regulator_probe(struct platform_device *pdev)
 {
 	struct da903x_regulator_info *ri = NULL;
 	struct regulator_dev *rdev;
@@ -499,7 +499,7 @@ static int __devinit da903x_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit da903x_regulator_remove(struct platform_device *pdev)
+static int da903x_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
@@ -513,7 +513,7 @@ static struct platform_driver da903x_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= da903x_regulator_probe,
-	.remove		= __devexit_p(da903x_regulator_remove),
+	.remove		= da903x_regulator_remove,
 };
 
 static int __init da903x_regulator_init(void)

drivers/regulator/da9052-regulator.c

@@ -129,17 +129,17 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA,
 	else if (offset == 0)
 		row = 1;
 
-	if (min_uA > da9052_current_limits[row][DA9052_MAX_UA] ||
-	    max_uA < da9052_current_limits[row][DA9052_MIN_UA])
-		return -EINVAL;
-
 	for (i = DA9052_CURRENT_RANGE - 1; i >= 0; i--) {
-		if (da9052_current_limits[row][i] <= max_uA) {
+		if ((min_uA <= da9052_current_limits[row][i]) &&
+		    (da9052_current_limits[row][i] <= max_uA)) {
 			reg_val = i;
 			break;
 		}
 	}
 
+	if (i < 0)
+		return -EINVAL;
+
 	/* Determine the even or odd position of the buck current limit
 	 * register field
 	*/
@@ -365,7 +365,7 @@ static inline struct da9052_regulator_info *find_regulator_info(u8 chip_id,
 	return NULL;
 }
 
-static int __devinit da9052_regulator_probe(struct platform_device *pdev)
+static int da9052_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_config config = { };
 	struct da9052_regulator *regulator;
@@ -430,7 +430,7 @@ static int __devinit da9052_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit da9052_regulator_remove(struct platform_device *pdev)
+static int da9052_regulator_remove(struct platform_device *pdev)
 {
 	struct da9052_regulator *regulator = platform_get_drvdata(pdev);
 
@@ -440,7 +440,7 @@ static int __devexit da9052_regulator_remove(struct platform_device *pdev)
 
 static struct platform_driver da9052_regulator_driver = {
 	.probe = da9052_regulator_probe,
-	.remove = __devexit_p(da9052_regulator_remove),
+	.remove = da9052_regulator_remove,
 	.driver = {
 		.name = "da9052-regulator",
 		.owner = THIS_MODULE,

drivers/regulator/da9055-regulator.c

@@ -0,0 +1,641 @@
+/*
+* Regulator driver for DA9055 PMIC
+*
+* Copyright(c) 2012 Dialog Semiconductor Ltd.
+*
+* Author: David Dajun Chen <dchen@diasemi.com>
+*
+* This program is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License as published by
+* the Free Software Foundation; either version 2 of the License, or
+* (at your option) any later version.
+*
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+
+#include <linux/mfd/da9055/core.h>
+#include <linux/mfd/da9055/reg.h>
+#include <linux/mfd/da9055/pdata.h>
+
+#define DA9055_MIN_UA		0
+#define DA9055_MAX_UA		3
+
+#define DA9055_LDO_MODE_SYNC	0
+#define DA9055_LDO_MODE_SLEEP	1
+
+#define DA9055_BUCK_MODE_SLEEP	1
+#define DA9055_BUCK_MODE_SYNC	2
+#define DA9055_BUCK_MODE_AUTO	3
+
+/* DA9055 REGULATOR IDs */
+#define DA9055_ID_BUCK1	0
+#define DA9055_ID_BUCK2	1
+#define DA9055_ID_LDO1		2
+#define DA9055_ID_LDO2		3
+#define DA9055_ID_LDO3		4
+#define DA9055_ID_LDO4		5
+#define DA9055_ID_LDO5		6
+#define DA9055_ID_LDO6		7
+
+/* DA9055 BUCK current limit */
+static const int da9055_current_limits[] = { 500000, 600000, 700000, 800000 };
+
+struct da9055_conf_reg {
+	int reg;
+	int sel_mask;
+	int en_mask;
+};
+
+struct da9055_volt_reg {
+	int reg_a;
+	int reg_b;
+	int sl_shift;
+	int v_mask;
+	int v_shift;
+};
+
+struct da9055_mode_reg {
+	int reg;
+	int mask;
+	int shift;
+};
+
+struct da9055_regulator_info {
+	struct regulator_desc reg_desc;
+	struct da9055_conf_reg conf;
+	struct da9055_volt_reg volt;
+	struct da9055_mode_reg mode;
+};
+
+struct da9055_regulator {
+	struct da9055 *da9055;
+	struct da9055_regulator_info *info;
+	struct regulator_dev *rdev;
+	enum gpio_select reg_rselect;
+};
+
+static unsigned int da9055_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret, mode = 0;
+
+	ret = da9055_reg_read(regulator->da9055, info->mode.reg);
+	if (ret < 0)
+		return ret;
+
+	switch ((ret & info->mode.mask) >> info->mode.shift) {
+	case DA9055_BUCK_MODE_SYNC:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case DA9055_BUCK_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case DA9055_BUCK_MODE_SLEEP:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	}
+
+	return mode;
+}
+
+static int da9055_buck_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = DA9055_BUCK_MODE_SYNC << info->mode.shift;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = DA9055_BUCK_MODE_AUTO << info->mode.shift;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = DA9055_BUCK_MODE_SLEEP << info->mode.shift;
+		break;
+	}
+
+	return da9055_reg_update(regulator->da9055, info->mode.reg,
+				 info->mode.mask, val);
+}
+
+static unsigned int da9055_ldo_get_mode(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	ret = da9055_reg_read(regulator->da9055, info->volt.reg_b);
+	if (ret < 0)
+		return ret;
+
+	if (ret >> info->volt.sl_shift)
+		return REGULATOR_MODE_STANDBY;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int da9055_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	struct da9055_volt_reg volt = info->volt;
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+	case REGULATOR_MODE_FAST:
+		val = DA9055_LDO_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = DA9055_LDO_MODE_SLEEP;
+		break;
+	}
+
+	return da9055_reg_update(regulator->da9055, volt.reg_b,
+				 1 << volt.sl_shift,
+				 val << volt.sl_shift);
+}
+
+static int da9055_buck_get_current_limit(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	ret = da9055_reg_read(regulator->da9055, DA9055_REG_BUCK_LIM);
+	if (ret < 0)
+		return ret;
+
+	ret &= info->mode.mask;
+	return da9055_current_limits[ret >> info->mode.shift];
+}
+
+static int da9055_buck_set_current_limit(struct regulator_dev *rdev, int min_uA,
+					 int max_uA)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int i;
+
+	for (i = ARRAY_SIZE(da9055_current_limits) - 1; i >= 0; i--) {
+		if ((min_uA <= da9055_current_limits[i]) &&
+		    (da9055_current_limits[i] <= max_uA))
+			return da9055_reg_update(regulator->da9055,
+						 DA9055_REG_BUCK_LIM,
+						 info->mode.mask,
+						 i << info->mode.shift);
+	}
+
+	return -EINVAL;
+}
+
+static int da9055_regulator_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	struct da9055_volt_reg volt = info->volt;
+	int ret, sel;
+
+	/*
+	 * There are two voltage register set A & B for voltage ramping but
+	 * either one of then can be active therefore we first determine
+	 * the active register set.
+	 */
+	ret = da9055_reg_read(regulator->da9055, info->conf.reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= info->conf.sel_mask;
+
+	/* Get the voltage for the active register set A/B */
+	if (ret == DA9055_REGUALTOR_SET_A)
+		ret = da9055_reg_read(regulator->da9055, volt.reg_a);
+	else
+		ret = da9055_reg_read(regulator->da9055, volt.reg_b);
+
+	if (ret < 0)
+		return ret;
+
+	sel = (ret & volt.v_mask);
+	return sel;
+}
+
+static int da9055_regulator_set_voltage_sel(struct regulator_dev *rdev,
+					    unsigned int selector)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	/*
+	 * Regulator register set A/B is not selected through GPIO therefore
+	 * we use default register set A for voltage ramping.
+	 */
+	if (regulator->reg_rselect == NO_GPIO) {
+		/* Select register set A */
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_A);
+		if (ret < 0)
+			return ret;
+
+		/* Set the voltage */
+		return da9055_reg_update(regulator->da9055, info->volt.reg_a,
+					 info->volt.v_mask, selector);
+	}
+
+	/*
+	 * Here regulator register set A/B is selected through GPIO.
+	 * Therefore we first determine the selected register set A/B and
+	 * then set the desired voltage for that register set A/B.
+	 */
+	ret = da9055_reg_read(regulator->da9055, info->conf.reg);
+	if (ret < 0)
+		return ret;
+
+	ret &= info->conf.sel_mask;
+
+	/* Set the voltage */
+	if (ret == DA9055_REGUALTOR_SET_A)
+		return da9055_reg_update(regulator->da9055, info->volt.reg_a,
+					 info->volt.v_mask, selector);
+	else
+		return da9055_reg_update(regulator->da9055, info->volt.reg_b,
+					 info->volt.v_mask, selector);
+}
+
+static int da9055_regulator_set_suspend_voltage(struct regulator_dev *rdev,
+						int uV)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+	int ret;
+
+	/* Select register set B for suspend voltage ramping. */
+	if (regulator->reg_rselect == NO_GPIO) {
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_B);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = regulator_map_voltage_linear(rdev, uV, uV);
+	if (ret < 0)
+		return ret;
+
+	return da9055_reg_update(regulator->da9055, info->volt.reg_b,
+				 info->volt.v_mask, ret);
+}
+
+static int da9055_suspend_enable(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+
+	/* Select register set B for voltage ramping. */
+	if (regulator->reg_rselect == NO_GPIO)
+		return da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_B);
+	else
+		return 0;
+}
+
+static int da9055_suspend_disable(struct regulator_dev *rdev)
+{
+	struct da9055_regulator *regulator = rdev_get_drvdata(rdev);
+	struct da9055_regulator_info *info = regulator->info;
+
+	/* Diselect register set B. */
+	if (regulator->reg_rselect == NO_GPIO)
+		return da9055_reg_update(regulator->da9055, info->conf.reg,
+					info->conf.sel_mask, DA9055_SEL_REG_A);
+	else
+		return 0;
+}
+
+static struct regulator_ops da9055_buck_ops = {
+	.get_mode = da9055_buck_get_mode,
+	.set_mode = da9055_buck_set_mode,
+
+	.get_current_limit = da9055_buck_get_current_limit,
+	.set_current_limit = da9055_buck_set_current_limit,
+
+	.get_voltage_sel = da9055_regulator_get_voltage_sel,
+	.set_voltage_sel = da9055_regulator_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+
+	.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
+	.set_suspend_enable = da9055_suspend_enable,
+	.set_suspend_disable = da9055_suspend_disable,
+	.set_suspend_mode = da9055_buck_set_mode,
+};
+
+static struct regulator_ops da9055_ldo_ops = {
+	.get_mode = da9055_ldo_get_mode,
+	.set_mode = da9055_ldo_set_mode,
+
+	.get_voltage_sel = da9055_regulator_get_voltage_sel,
+	.set_voltage_sel = da9055_regulator_set_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+
+	.set_suspend_voltage = da9055_regulator_set_suspend_voltage,
+	.set_suspend_enable = da9055_suspend_enable,
+	.set_suspend_disable = da9055_suspend_disable,
+	.set_suspend_mode = da9055_ldo_set_mode,
+
+};
+
+#define DA9055_LDO(_id, step, min, max, vbits, voffset) \
+{\
+	.reg_desc = {\
+		.name = #_id,\
+		.ops = &da9055_ldo_ops,\
+		.type = REGULATOR_VOLTAGE,\
+		.id = DA9055_ID_##_id,\
+		.n_voltages = (max - min) / step + 1 + (voffset), \
+		.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.enable_mask = 1, \
+		.min_uV = (min) * 1000,\
+		.uV_step = (step) * 1000,\
+		.linear_min_sel = (voffset),\
+		.owner = THIS_MODULE,\
+	},\
+	.conf = {\
+		.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.sel_mask = (1 << 4),\
+		.en_mask = 1,\
+	},\
+	.volt = {\
+		.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
+		.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
+		.sl_shift = 7,\
+		.v_mask = (1 << (vbits)) - 1,\
+		.v_shift = (vbits),\
+	},\
+}
+
+#define DA9055_BUCK(_id, step, min, max, vbits, voffset, mbits, sbits) \
+{\
+	.reg_desc = {\
+		.name = #_id,\
+		.ops = &da9055_buck_ops,\
+		.type = REGULATOR_VOLTAGE,\
+		.id = DA9055_ID_##_id,\
+		.n_voltages = (max - min) / step + 1 + (voffset), \
+		.enable_reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.enable_mask = 1,\
+		.min_uV = (min) * 1000,\
+		.uV_step = (step) * 1000,\
+		.linear_min_sel = (voffset),\
+		.owner = THIS_MODULE,\
+	},\
+	.conf = {\
+		.reg = DA9055_REG_BCORE_CONT + DA9055_ID_##_id, \
+		.sel_mask = (1 << 4),\
+		.en_mask = 1,\
+	},\
+	.volt = {\
+		.reg_a = DA9055_REG_VBCORE_A + DA9055_ID_##_id, \
+		.reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \
+		.sl_shift = 7,\
+		.v_mask = (1 << (vbits)) - 1,\
+		.v_shift = (vbits),\
+	},\
+	.mode = {\
+		.reg = DA9055_REG_BCORE_MODE,\
+		.mask = (mbits),\
+		.shift = (sbits),\
+	},\
+}
+
+static struct da9055_regulator_info da9055_regulator_info[] = {
+	DA9055_BUCK(BUCK1, 25, 725, 2075, 6, 9, 0xc, 2),
+	DA9055_BUCK(BUCK2, 25, 925, 2500, 6, 0, 3, 0),
+	DA9055_LDO(LDO1, 50, 900, 3300, 6, 2),
+	DA9055_LDO(LDO2, 50, 900, 3300, 6, 3),
+	DA9055_LDO(LDO3, 50, 900, 3300, 6, 2),
+	DA9055_LDO(LDO4, 50, 900, 3300, 6, 2),
+	DA9055_LDO(LDO5, 50, 900, 2750, 6, 2),
+	DA9055_LDO(LDO6, 20, 900, 3300, 7, 0),
+};
+
+/*
+ * Configures regulator to be controlled either through GPIO 1 or 2.
+ * GPIO can control regulator state and/or select the regulator register
+ * set A/B for voltage ramping.
+ */
+static __devinit int da9055_gpio_init(struct da9055_regulator *regulator,
+				      struct regulator_config *config,
+				      struct da9055_pdata *pdata, int id)
+{
+	struct da9055_regulator_info *info = regulator->info;
+	int ret = 0;
+
+	if (pdata->gpio_ren && pdata->gpio_ren[id]) {
+		char name[18];
+		int gpio_mux = pdata->gpio_ren[id];
+
+		config->ena_gpio = pdata->ena_gpio[id];
+		config->ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+		config->ena_gpio_invert = 1;
+
+		/*
+		 * GPI pin is muxed with regulator to control the
+		 * regulator state.
+		 */
+		sprintf(name, "DA9055 GPI %d", gpio_mux);
+		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
+					    name);
+		if (ret < 0)
+			goto err;
+
+		/*
+		 * Let the regulator know that its state is controlled
+		 * through GPI.
+		 */
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					DA9055_E_GPI_MASK,
+					pdata->reg_ren[id]
+					<< DA9055_E_GPI_SHIFT);
+		if (ret < 0)
+			goto err;
+	}
+
+	if (pdata->gpio_rsel && pdata->gpio_rsel[id]) {
+		char name[18];
+		int gpio_mux = pdata->gpio_rsel[id];
+
+		regulator->reg_rselect = pdata->reg_rsel[id];
+
+		/*
+		 * GPI pin is muxed with regulator to select the
+		 * regulator register set A/B for voltage ramping.
+		 */
+		sprintf(name, "DA9055 GPI %d", gpio_mux);
+		ret = devm_gpio_request_one(config->dev, gpio_mux, GPIOF_DIR_IN,
+					    name);
+		if (ret < 0)
+			goto err;
+
+		/*
+		 * Let the regulator know that its register set A/B
+		 * will be selected through GPI for voltage ramping.
+		 */
+		ret = da9055_reg_update(regulator->da9055, info->conf.reg,
+					DA9055_V_GPI_MASK,
+					pdata->reg_rsel[id]
+					<< DA9055_V_GPI_SHIFT);
+	}
+
+err:
+	return ret;
+}
+
+static irqreturn_t da9055_ldo5_6_oc_irq(int irq, void *data)
+{
+	struct da9055_regulator *regulator = data;
+
+	regulator_notifier_call_chain(regulator->rdev,
+				      REGULATOR_EVENT_OVER_CURRENT, NULL);
+
+	return IRQ_HANDLED;
+}
+
+static inline struct da9055_regulator_info *find_regulator_info(int id)
+{
+	struct da9055_regulator_info *info;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da9055_regulator_info); i++) {
+		info = &da9055_regulator_info[i];
+		if (info->reg_desc.id == id)
+			return info;
+	}
+
+	return NULL;
+}
+
+static int __devinit da9055_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_config config = { };
+	struct da9055_regulator *regulator;
+	struct da9055 *da9055 = dev_get_drvdata(pdev->dev.parent);
+	struct da9055_pdata *pdata = da9055->dev->platform_data;
+	int ret, irq;
+
+	if (pdata == NULL || pdata->regulators[pdev->id] == NULL)
+		return -ENODEV;
+
+	regulator = devm_kzalloc(&pdev->dev, sizeof(struct da9055_regulator),
+				 GFP_KERNEL);
+	if (!regulator)
+		return -ENOMEM;
+
+	regulator->info = find_regulator_info(pdev->id);
+	if (regulator->info == NULL) {
+		dev_err(&pdev->dev, "invalid regulator ID specified\n");
+		return -EINVAL;
+	}
+
+	regulator->da9055 = da9055;
+	config.dev = &pdev->dev;
+	config.driver_data = regulator;
+	config.regmap = da9055->regmap;
+
+	if (pdata && pdata->regulators)
+		config.init_data = pdata->regulators[pdev->id];
+
+	ret = da9055_gpio_init(regulator, &config, pdata, pdev->id);
+	if (ret < 0)
+		return ret;
+
+	regulator->rdev = regulator_register(&regulator->info->reg_desc,
+					     &config);
+	if (IS_ERR(regulator->rdev)) {
+		dev_err(&pdev->dev, "Failed to register regulator %s\n",
+			regulator->info->reg_desc.name);
+		ret = PTR_ERR(regulator->rdev);
+		return ret;
+	}
+
+	/* Only LDO 5 and 6 has got the over current interrupt */
+	if (pdev->id == DA9055_ID_LDO5 || pdev->id ==  DA9055_ID_LDO6) {
+		irq = platform_get_irq_byname(pdev, "REGULATOR");
+		irq = regmap_irq_get_virq(da9055->irq_data, irq);
+		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+						da9055_ldo5_6_oc_irq,
+						IRQF_TRIGGER_HIGH |
+						IRQF_ONESHOT |
+						IRQF_PROBE_SHARED,
+						pdev->name, regulator);
+		if (ret != 0) {
+			if (ret != -EBUSY) {
+				dev_err(&pdev->dev,
+				"Failed to request Regulator IRQ %d: %d\n",
+				irq, ret);
+				goto err_regulator;
+			}
+		}
+	}
+
+	platform_set_drvdata(pdev, regulator);
+
+	return 0;
+
+err_regulator:
+	regulator_unregister(regulator->rdev);
+	return ret;
+}
+
+static int __devexit da9055_regulator_remove(struct platform_device *pdev)
+{
+	struct da9055_regulator *regulator = platform_get_drvdata(pdev);
+
+	regulator_unregister(regulator->rdev);
+
+	return 0;
+}
+
+static struct platform_driver da9055_regulator_driver = {
+	.probe = da9055_regulator_probe,
+	.remove = __devexit_p(da9055_regulator_remove),
+	.driver = {
+		.name = "da9055-regulator",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init da9055_regulator_init(void)
+{
+	return platform_driver_register(&da9055_regulator_driver);
+}
+subsys_initcall(da9055_regulator_init);
+
+static void __exit da9055_regulator_exit(void)
+{
+	platform_driver_unregister(&da9055_regulator_driver);
+}
+module_exit(da9055_regulator_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Power Regulator driver for Dialog DA9055 PMIC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9055-regulator");

drivers/regulator/db8500-prcmu.c

@@ -412,7 +412,7 @@ dbx500_regulator_info[DB8500_NUM_REGULATORS] = {
 	},
 };
 
-static __devinit int db8500_regulator_register(struct platform_device *pdev,
+static int db8500_regulator_register(struct platform_device *pdev,
 					struct regulator_init_data *init_data,
 					int id,
 					struct device_node *np)
@@ -474,7 +474,7 @@ static struct of_regulator_match db8500_regulator_matches[] = {
 	{ .name	= "db8500_esram34_ret",   .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
 };
 
-static __devinit int
+static int
 db8500_regulator_of_probe(struct platform_device *pdev,
 			struct device_node *np)
 {
@@ -491,7 +491,7 @@ db8500_regulator_of_probe(struct platform_device *pdev,
 	return 0;
 }
 
-static int __devinit db8500_regulator_probe(struct platform_device *pdev)
+static int db8500_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_init_data *db8500_init_data =
 					dev_get_platdata(&pdev->dev);

drivers/regulator/dbx500-prcmu.c

@@ -173,7 +173,7 @@ int __attribute__((weak)) dbx500_regulator_testcase(
 	return 0;
 }
 
-int __devinit
+int
 ux500_regulator_debug_init(struct platform_device *pdev,
 	struct dbx500_regulator_info *regulator_info,
 	int num_regulators)
@@ -230,7 +230,7 @@ exit_no_debugfs:
 	return -ENOMEM;
 }
 
-int __devexit ux500_regulator_debug_exit(void)
+int ux500_regulator_debug_exit(void)
 {
 	debugfs_remove_recursive(rdebug.dir);
 	kfree(rdebug.state_after_suspend);

drivers/regulator/dummy.c

@@ -37,7 +37,7 @@ static struct regulator_desc dummy_desc = {
 	.ops = &dummy_ops,
 };
 
-static int __devinit dummy_regulator_probe(struct platform_device *pdev)
+static int dummy_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_config config = { };
 	int ret;

drivers/regulator/fan53555.c

@@ -230,7 +230,7 @@ static struct regmap_config fan53555_regmap_config = {
 	.val_bits = 8,
 };
 
-static int __devinit fan53555_regulator_probe(struct i2c_client *client,
+static int fan53555_regulator_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct fan53555_device_info *di;
@@ -293,7 +293,7 @@ static int __devinit fan53555_regulator_probe(struct i2c_client *client,
 
 }
 
-static int __devexit fan53555_regulator_remove(struct i2c_client *client)
+static int fan53555_regulator_remove(struct i2c_client *client)
 {
 	struct fan53555_device_info *di = i2c_get_clientdata(client);
 
@@ -311,7 +311,7 @@ static struct i2c_driver fan53555_regulator_driver = {
 		.name = "fan53555-regulator",
 	},
 	.probe = fan53555_regulator_probe,
-	.remove = __devexit_p(fan53555_regulator_remove),
+	.remove = fan53555_regulator_remove,
 	.id_table = fan53555_id,
 };
 

drivers/regulator/fixed.c

@@ -134,7 +134,7 @@ static struct regulator_ops fixed_voltage_ops = {
 	.list_voltage = fixed_voltage_list_voltage,
 };
 
-static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
+static int reg_fixed_voltage_probe(struct platform_device *pdev)
 {
 	struct fixed_voltage_config *config;
 	struct fixed_voltage_data *drvdata;
@@ -234,7 +234,7 @@ err:
 	return ret;
 }
 
-static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
+static int reg_fixed_voltage_remove(struct platform_device *pdev)
 {
 	struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev);
 
@@ -255,7 +255,7 @@ MODULE_DEVICE_TABLE(of, fixed_of_match);
 
 static struct platform_driver regulator_fixed_voltage_driver = {
 	.probe		= reg_fixed_voltage_probe,
-	.remove		= __devexit_p(reg_fixed_voltage_remove),
+	.remove		= reg_fixed_voltage_remove,
 	.driver		= {
 		.name		= "reg-fixed-voltage",
 		.owner		= THIS_MODULE,

drivers/regulator/gpio-regulator.c

@@ -28,9 +28,12 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/regulator/gpio-regulator.h>
 #include <linux/gpio.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
 
 struct gpio_regulator_data {
 	struct regulator_desc desc;
@@ -79,7 +82,7 @@ static int gpio_regulator_set_voltage(struct regulator_dev *dev,
 
 	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
 		state = (target & (1 << ptr)) >> ptr;
-		gpio_set_value(data->gpios[ptr].gpio, state);
+		gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
 	}
 	data->state = target;
 
@@ -116,7 +119,7 @@ static int gpio_regulator_set_current_limit(struct regulator_dev *dev,
 
 	for (ptr = 0; ptr < data->nr_gpios; ptr++) {
 		state = (target & (1 << ptr)) >> ptr;
-		gpio_set_value(data->gpios[ptr].gpio, state);
+		gpio_set_value_cansleep(data->gpios[ptr].gpio, state);
 	}
 	data->state = target;
 
@@ -129,18 +132,108 @@ static struct regulator_ops gpio_regulator_voltage_ops = {
 	.list_voltage = gpio_regulator_list_voltage,
 };
 
+struct gpio_regulator_config *
+of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
+{
+	struct gpio_regulator_config *config;
+	struct property *prop;
+	const char *regtype;
+	int proplen, gpio, i;
+
+	config = devm_kzalloc(dev,
+			sizeof(struct gpio_regulator_config),
+			GFP_KERNEL);
+	if (!config)
+		return ERR_PTR(-ENOMEM);
+
+	config->init_data = of_get_regulator_init_data(dev, np);
+	if (!config->init_data)
+		return ERR_PTR(-EINVAL);
+
+	config->supply_name = config->init_data->constraints.name;
+
+	if (of_property_read_bool(np, "enable-active-high"))
+		config->enable_high = true;
+
+	if (of_property_read_bool(np, "enable-at-boot"))
+		config->enabled_at_boot = true;
+
+	of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
+
+	config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
+
+	/* Fetch GPIOs. */
+	for (i = 0; ; i++)
+		if (of_get_named_gpio(np, "gpios", i) < 0)
+			break;
+	config->nr_gpios = i;
+
+	config->gpios = devm_kzalloc(dev,
+				sizeof(struct gpio) * config->nr_gpios,
+				GFP_KERNEL);
+	if (!config->gpios)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < config->nr_gpios; i++) {
+		gpio = of_get_named_gpio(np, "gpios", i);
+		if (gpio < 0)
+			break;
+		config->gpios[i].gpio = gpio;
+	}
+
+	/* Fetch states. */
+	prop = of_find_property(np, "states", NULL);
+	if (!prop) {
+		dev_err(dev, "No 'states' property found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	proplen = prop->length / sizeof(int);
+
+	config->states = devm_kzalloc(dev,
+				sizeof(struct gpio_regulator_state)
+				* (proplen / 2),
+				GFP_KERNEL);
+	if (!config->states)
+		return ERR_PTR(-ENOMEM);
+
+	for (i = 0; i < proplen / 2; i++) {
+		config->states[i].value =
+			be32_to_cpup((int *)prop->value + (i * 2));
+		config->states[i].gpios =
+			be32_to_cpup((int *)prop->value + (i * 2 + 1));
+	}
+	config->nr_states = i;
+
+	of_property_read_string(np, "regulator-type", &regtype);
+
+	if (!strncmp("voltage", regtype, 7))
+		config->type = REGULATOR_VOLTAGE;
+	else if (!strncmp("current", regtype, 7))
+		config->type = REGULATOR_CURRENT;
+
+	return config;
+}
+
 static struct regulator_ops gpio_regulator_current_ops = {
 	.get_current_limit = gpio_regulator_get_value,
 	.set_current_limit = gpio_regulator_set_current_limit,
 };
 
-static int __devinit gpio_regulator_probe(struct platform_device *pdev)
+static int gpio_regulator_probe(struct platform_device *pdev)
 {
 	struct gpio_regulator_config *config = pdev->dev.platform_data;
+	struct device_node *np = pdev->dev.of_node;
 	struct gpio_regulator_data *drvdata;
 	struct regulator_config cfg = { };
 	int ptr, ret, state;
 
+	if (np) {
+		config = of_get_gpio_regulator_config(&pdev->dev, np);
+		if (IS_ERR(config))
+			return PTR_ERR(config);
+	}
+
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
 			       GFP_KERNEL);
 	if (drvdata == NULL) {
@@ -215,6 +308,7 @@ static int __devinit gpio_regulator_probe(struct platform_device *pdev)
 	cfg.dev = &pdev->dev;
 	cfg.init_data = config->init_data;
 	cfg.driver_data = drvdata;
+	cfg.of_node = np;
 
 	if (config->enable_gpio >= 0)
 		cfg.ena_gpio = config->enable_gpio;
@@ -254,7 +348,7 @@ err:
 	return ret;
 }
 
-static int __devexit gpio_regulator_remove(struct platform_device *pdev)
+static int gpio_regulator_remove(struct platform_device *pdev)
 {
 	struct gpio_regulator_data *drvdata = platform_get_drvdata(pdev);
 
@@ -270,12 +364,20 @@ static int __devexit gpio_regulator_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#if defined(CONFIG_OF)
+static const struct of_device_id regulator_gpio_of_match[] __devinitconst = {
+	{ .compatible = "regulator-gpio", },
+	{},
+};
+#endif
+
 static struct platform_driver gpio_regulator_driver = {
 	.probe		= gpio_regulator_probe,
-	.remove		= __devexit_p(gpio_regulator_remove),
+	.remove		= gpio_regulator_remove,
 	.driver		= {
 		.name		= "gpio-regulator",
 		.owner		= THIS_MODULE,
+		.of_match_table = of_match_ptr(regulator_gpio_of_match),
 	},
 };
 

drivers/regulator/isl6271a-regulator.c

@@ -106,7 +106,7 @@ static const struct regulator_desc isl_rd[] = {
 	},
 };
 
-static int __devinit isl6271a_probe(struct i2c_client *i2c,
+static int isl6271a_probe(struct i2c_client *i2c,
 				     const struct i2c_device_id *id)
 {
 	struct regulator_config config = { };
@@ -151,7 +151,7 @@ error:
 	return err;
 }
 
-static int __devexit isl6271a_remove(struct i2c_client *i2c)
+static int isl6271a_remove(struct i2c_client *i2c)
 {
 	struct isl_pmic *pmic = i2c_get_clientdata(i2c);
 	int i;
@@ -174,7 +174,7 @@ static struct i2c_driver isl6271a_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = isl6271a_probe,
-	.remove = __devexit_p(isl6271a_remove),
+	.remove = isl6271a_remove,
 	.id_table = isl6271a_id,
 };
 

drivers/regulator/lp3971.c

@@ -386,7 +386,7 @@ static int lp3971_set_bits(struct lp3971 *lp3971, u8 reg, u16 mask, u16 val)
 	return ret;
 }
 
-static int __devinit setup_regulators(struct lp3971 *lp3971,
+static int setup_regulators(struct lp3971 *lp3971,
 				      struct lp3971_platform_data *pdata)
 {
 	int i, err;
@@ -429,7 +429,7 @@ err_nomem:
 	return err;
 }
 
-static int __devinit lp3971_i2c_probe(struct i2c_client *i2c,
+static int lp3971_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct lp3971 *lp3971;
@@ -472,7 +472,7 @@ err_detect:
 	return ret;
 }
 
-static int __devexit lp3971_i2c_remove(struct i2c_client *i2c)
+static int lp3971_i2c_remove(struct i2c_client *i2c)
 {
 	struct lp3971 *lp3971 = i2c_get_clientdata(i2c);
 	int i;
@@ -498,7 +498,7 @@ static struct i2c_driver lp3971_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe    = lp3971_i2c_probe,
-	.remove   = __devexit_p(lp3971_i2c_remove),
+	.remove   = lp3971_i2c_remove,
 	.id_table = lp3971_i2c_id,
 };
 

drivers/regulator/lp3972.c

@@ -481,7 +481,7 @@ static const struct regulator_desc regulators[] = {
 	},
 };
 
-static int __devinit setup_regulators(struct lp3972 *lp3972,
+static int setup_regulators(struct lp3972 *lp3972,
 	struct lp3972_platform_data *pdata)
 {
 	int i, err;
@@ -523,7 +523,7 @@ err_nomem:
 	return err;
 }
 
-static int __devinit lp3972_i2c_probe(struct i2c_client *i2c,
+static int lp3972_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
 	struct lp3972 *lp3972;
@@ -569,7 +569,7 @@ err_detect:
 	return ret;
 }
 
-static int __devexit lp3972_i2c_remove(struct i2c_client *i2c)
+static int lp3972_i2c_remove(struct i2c_client *i2c)
 {
 	struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
 	int i;
@@ -594,7 +594,7 @@ static struct i2c_driver lp3972_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe    = lp3972_i2c_probe,
-	.remove   = __devexit_p(lp3972_i2c_remove),
+	.remove   = lp3972_i2c_remove,
 	.id_table = lp3972_i2c_id,
 };
 

drivers/regulator/lp872x.c

@@ -893,7 +893,7 @@ err_dev:
 	return ret;
 }
 
-static int __devexit lp872x_remove(struct i2c_client *cl)
+static int lp872x_remove(struct i2c_client *cl)
 {
 	struct lp872x *lp = i2c_get_clientdata(cl);
 
@@ -914,7 +914,7 @@ static struct i2c_driver lp872x_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = lp872x_probe,
-	.remove = __devexit_p(lp872x_remove),
+	.remove = lp872x_remove,
 	.id_table = lp872x_ids,
 };
 

drivers/regulator/lp8788-buck.c

@@ -429,18 +429,6 @@ static struct regulator_desc lp8788_buck_desc[] = {
 	},
 };
 
-static int _gpio_request(struct lp8788_buck *buck, int gpio, char *name)
-{
-	struct device *dev = buck->lp->dev;
-
-	if (!gpio_is_valid(gpio)) {
-		dev_err(dev, "invalid gpio: %d\n", gpio);
-		return -EINVAL;
-	}
-
-	return devm_gpio_request_one(dev, gpio, DVS_LOW, name);
-}
-
 static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
 				enum lp8788_buck_id id)
 {
@@ -452,7 +440,8 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
 	switch (id) {
 	case BUCK1:
 		gpio = pdata->buck1_dvs->gpio;
-		ret = _gpio_request(buck, gpio, b1_name);
+		ret = devm_gpio_request_one(buck->lp->dev, gpio, DVS_LOW,
+					    b1_name);
 		if (ret)
 			return ret;
 
@@ -461,7 +450,8 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck,
 	case BUCK2:
 		for (i = 0 ; i < LP8788_NUM_BUCK2_DVS ; i++) {
 			gpio = pdata->buck2_dvs->gpio[i];
-			ret = _gpio_request(buck, gpio, b2_name[i]);
+			ret = devm_gpio_request_one(buck->lp->dev, gpio,
+						    DVS_LOW, b2_name[i]);
 			if (ret)
 				return ret;
 		}
@@ -504,7 +494,7 @@ set_default_dvs_mode:
 				  default_dvs_mode[id]);
 }
 
-static __devinit int lp8788_buck_probe(struct platform_device *pdev)
+static int lp8788_buck_probe(struct platform_device *pdev)
 {
 	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 	int id = pdev->id;
@@ -542,7 +532,7 @@ static __devinit int lp8788_buck_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit lp8788_buck_remove(struct platform_device *pdev)
+static int lp8788_buck_remove(struct platform_device *pdev)
 {
 	struct lp8788_buck *buck = platform_get_drvdata(pdev);
 
@@ -554,7 +544,7 @@ static int __devexit lp8788_buck_remove(struct platform_device *pdev)
 
 static struct platform_driver lp8788_buck_driver = {
 	.probe = lp8788_buck_probe,
-	.remove = __devexit_p(lp8788_buck_remove),
+	.remove = lp8788_buck_remove,
 	.driver = {
 		.name = LP8788_DEV_BUCK,
 		.owner = THIS_MODULE,

drivers/regulator/lp8788-ldo.c

@@ -126,7 +126,7 @@ struct lp8788_ldo {
 };
 
 /* DLDO 1, 2, 3, 9 voltage table */
-const int lp8788_dldo1239_vtbl[] = {
+static const int lp8788_dldo1239_vtbl[] = {
 	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
 	2600000, 2700000, 2800000, 2900000, 3000000, 2850000, 2850000, 2850000,
 	2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000, 2850000,
@@ -662,14 +662,6 @@ static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
 		[EN_DLDO7]   = LP8788_EN_SEL_DLDO7_M,
 		[EN_DLDO911] = LP8788_EN_SEL_DLDO911_M,
 	};
-	u8 val[] = {
-		[EN_ALDO1]   = 0 << 5,
-		[EN_ALDO234] = 0 << 4,
-		[EN_ALDO5]   = 0 << 3,
-		[EN_ALDO7]   = 0 << 2,
-		[EN_DLDO7]   = 0 << 1,
-		[EN_DLDO911] = 0 << 0,
-	};
 
 	switch (id) {
 	case DLDO7:
@@ -708,11 +700,10 @@ static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo,
 	return ret;
 
 set_default_ldo_enable_mode:
-	return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id],
-				val[enable_id]);
+	return lp8788_update_bits(lp, LP8788_EN_SEL, en_mask[enable_id], 0);
 }
 
-static __devinit int lp8788_dldo_probe(struct platform_device *pdev)
+static int lp8788_dldo_probe(struct platform_device *pdev)
 {
 	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 	int id = pdev->id;
@@ -749,7 +740,7 @@ static __devinit int lp8788_dldo_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit lp8788_dldo_remove(struct platform_device *pdev)
+static int lp8788_dldo_remove(struct platform_device *pdev)
 {
 	struct lp8788_ldo *ldo = platform_get_drvdata(pdev);
 
@@ -761,14 +752,14 @@ static int __devexit lp8788_dldo_remove(struct platform_device *pdev)
 
 static struct platform_driver lp8788_dldo_driver = {
 	.probe = lp8788_dldo_probe,
-	.remove = __devexit_p(lp8788_dldo_remove),
+	.remove = lp8788_dldo_remove,
 	.driver = {
 		.name = LP8788_DEV_DLDO,
 		.owner = THIS_MODULE,
 	},
 };
 
-static __devinit int lp8788_aldo_probe(struct platform_device *pdev)
+static int lp8788_aldo_probe(struct platform_device *pdev)
 {
 	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
 	int id = pdev->id;
@@ -805,7 +796,7 @@ static __devinit int lp8788_aldo_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit lp8788_aldo_remove(struct platform_device *pdev)
+static int lp8788_aldo_remove(struct platform_device *pdev)
 {
 	struct lp8788_ldo *ldo = platform_get_drvdata(pdev);
 
@@ -817,7 +808,7 @@ static int __devexit lp8788_aldo_remove(struct platform_device *pdev)
 
 static struct platform_driver lp8788_aldo_driver = {
 	.probe = lp8788_aldo_probe,
-	.remove = __devexit_p(lp8788_aldo_remove),
+	.remove = lp8788_aldo_remove,
 	.driver = {
 		.name = LP8788_DEV_ALDO,
 		.owner = THIS_MODULE,

drivers/regulator/max1586.c

@@ -44,6 +44,9 @@ struct max1586_data {
 	unsigned int min_uV;
 	unsigned int max_uV;
 
+	unsigned int v3_curr_sel;
+	unsigned int v6_curr_sel;
+
 	struct regulator_dev *rdev[0];
 };
 
@@ -63,31 +66,60 @@ static int v6_voltages_uv[] = { 1, 1800000, 2500000, 3000000 };
  * R24 and R25=100kOhm as described in the data sheet.
  * The gain is approximately: 1 + R24/R25 + R24/185.5kOhm
  */
+static int max1586_v3_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+	return max1586->v3_curr_sel;
+}
+
 static int max1586_v3_set_voltage_sel(struct regulator_dev *rdev,
 				      unsigned selector)
 {
 	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
 	struct i2c_client *client = max1586->client;
+	int ret;
 	u8 v3_prog;
 
 	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
 		regulator_list_voltage_linear(rdev, selector) / 1000);
 
 	v3_prog = I2C_V3_SELECT | (u8) selector;
-	return i2c_smbus_write_byte(client, v3_prog);
+	ret = i2c_smbus_write_byte(client, v3_prog);
+	if (ret)
+		return ret;
+
+	max1586->v3_curr_sel = selector;
+
+	return 0;
+}
+
+static int max1586_v6_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
+	return max1586->v6_curr_sel;
 }
 
 static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
 				      unsigned int selector)
 {
-	struct i2c_client *client = rdev_get_drvdata(rdev);
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+	struct i2c_client *client = max1586->client;
 	u8 v6_prog;
+	int ret;
 
 	dev_dbg(&client->dev, "changing voltage v6 to %dmv\n",
 		rdev->desc->volt_table[selector] / 1000);
 
 	v6_prog = I2C_V6_SELECT | (u8) selector;
-	return i2c_smbus_write_byte(client, v6_prog);
+	ret = i2c_smbus_write_byte(client, v6_prog);
+	if (ret)
+		return ret;
+
+	max1586->v6_curr_sel = selector;
+
+	return 0;
 }
 
 /*
@@ -95,12 +127,14 @@ static int max1586_v6_set_voltage_sel(struct regulator_dev *rdev,
  * the set up value.
  */
 static struct regulator_ops max1586_v3_ops = {
+	.get_voltage_sel = max1586_v3_get_voltage_sel,
 	.set_voltage_sel = max1586_v3_set_voltage_sel,
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 };
 
 static struct regulator_ops max1586_v6_ops = {
+	.get_voltage_sel = max1586_v6_get_voltage_sel,
 	.set_voltage_sel = max1586_v6_set_voltage_sel,
 	.list_voltage = regulator_list_voltage_table,
 };
@@ -125,7 +159,7 @@ static struct regulator_desc max1586_reg[] = {
 	},
 };
 
-static int __devinit max1586_pmic_probe(struct i2c_client *client,
+static int max1586_pmic_probe(struct i2c_client *client,
 					const struct i2c_device_id *i2c_id)
 {
 	struct regulator_dev **rdev;
@@ -148,6 +182,10 @@ static int __devinit max1586_pmic_probe(struct i2c_client *client,
 	max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
 	max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
 
+	/* Set curr_sel to default voltage on power-up */
+	max1586->v3_curr_sel = 24; /* 1.3V */
+	max1586->v6_curr_sel = 0;
+
 	rdev = max1586->rdev;
 	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
 		id = pdata->subdevs[i].id;
@@ -188,7 +226,7 @@ err:
 	return ret;
 }
 
-static int __devexit max1586_pmic_remove(struct i2c_client *client)
+static int max1586_pmic_remove(struct i2c_client *client)
 {
 	struct max1586_data *max1586 = i2c_get_clientdata(client);
 	int i;
@@ -207,7 +245,7 @@ MODULE_DEVICE_TABLE(i2c, max1586_id);
 
 static struct i2c_driver max1586_pmic_driver = {
 	.probe = max1586_pmic_probe,
-	.remove = __devexit_p(max1586_pmic_remove),
+	.remove = max1586_pmic_remove,
 	.driver		= {
 		.name	= "max1586",
 		.owner	= THIS_MODULE,

drivers/regulator/max77686.c

@@ -67,8 +67,94 @@ enum max77686_ramp_rate {
 
 struct max77686_data {
 	struct regulator_dev *rdev[MAX77686_REGULATORS];
+	unsigned int opmode[MAX77686_REGULATORS];
 };
 
+/* Some BUCKS supports Normal[ON/OFF] mode during suspend */
+static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+
+	if (rdev->desc->id == MAX77686_BUCK1)
+		val = 0x1;
+	else
+		val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
+
+	max77686->opmode[rdev->desc->id] = val;
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  rdev->desc->enable_mask,
+				  val);
+}
+
+/* Some LDOs supports [LPM/Normal]ON mode during suspend state */
+static int max77686_set_suspend_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+	unsigned int val;
+
+	/* BUCK[5-9] doesn't support this feature */
+	if (rdev->desc->id >= MAX77686_BUCK5)
+		return 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_IDLE:			/* ON in LP Mode */
+		val = 0x2 << MAX77686_OPMODE_SHIFT;
+		break;
+	case REGULATOR_MODE_NORMAL:			/* ON in Normal Mode */
+		val = 0x3 << MAX77686_OPMODE_SHIFT;
+		break;
+	default:
+		pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
+			rdev->desc->name, mode);
+		return -EINVAL;
+	}
+
+	max77686->opmode[rdev->desc->id] = val;
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  rdev->desc->enable_mask,
+				  val);
+}
+
+/* Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state */
+static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	unsigned int val;
+	struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:			/* switch off */
+		val = 0x1 << MAX77686_OPMODE_SHIFT;
+		break;
+	case REGULATOR_MODE_IDLE:			/* ON in LP Mode */
+		val = 0x2 << MAX77686_OPMODE_SHIFT;
+		break;
+	case REGULATOR_MODE_NORMAL:			/* ON in Normal Mode */
+		val = 0x3 << MAX77686_OPMODE_SHIFT;
+		break;
+	default:
+		pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
+			rdev->desc->name, mode);
+		return -EINVAL;
+	}
+
+	max77686->opmode[rdev->desc->id] = val;
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  rdev->desc->enable_mask,
+				  val);
+}
+
+static int max77686_enable(struct regulator_dev *rdev)
+{
+	struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  rdev->desc->enable_mask,
+				  max77686->opmode[rdev->desc->id]);
+}
+
 static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
 {
 	unsigned int ramp_value = RAMP_RATE_NO_CTRL;
@@ -98,23 +184,49 @@ static struct regulator_ops max77686_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
-	.enable			= regulator_enable_regmap,
+	.enable			= max77686_enable,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_mode	= max77686_set_suspend_mode,
+};
+
+static struct regulator_ops max77686_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= max77686_enable,
 	.disable		= regulator_disable_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_mode	= max77686_ldo_set_suspend_mode,
+};
+
+static struct regulator_ops max77686_buck1_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.enable			= max77686_enable,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_disable	= max77686_buck_set_suspend_disable,
 };
 
 static struct regulator_ops max77686_buck_dvs_ops = {
 	.list_voltage		= regulator_list_voltage_linear,
 	.map_voltage		= regulator_map_voltage_linear,
 	.is_enabled		= regulator_is_enabled_regmap,
-	.enable			= regulator_enable_regmap,
+	.enable			= max77686_enable,
 	.disable		= regulator_disable_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 	.set_ramp_delay		= max77686_set_ramp_delay,
+	.set_suspend_disable	= max77686_buck_set_suspend_disable,
 };
 
 #define regulator_desc_ldo(num)		{				\
@@ -133,7 +245,39 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 	.enable_mask	= MAX77686_OPMODE_MASK				\
 			<< MAX77686_OPMODE_SHIFT,			\
 }
+#define regulator_desc_lpm_ldo(num)	{				\
+	.name		= "LDO"#num,					\
+	.id		= MAX77686_LDO##num,				\
+	.ops		= &max77686_ldo_ops,				\
+	.type		= REGULATOR_VOLTAGE,				\
+	.owner		= THIS_MODULE,					\
+	.min_uV		= MAX77686_LDO_MINUV,				\
+	.uV_step	= MAX77686_LDO_UVSTEP,				\
+	.ramp_delay	= MAX77686_RAMP_DELAY,				\
+	.n_voltages	= MAX77686_VSEL_MASK + 1,			\
+	.vsel_reg	= MAX77686_REG_LDO1CTRL1 + num - 1,		\
+	.vsel_mask	= MAX77686_VSEL_MASK,				\
+	.enable_reg	= MAX77686_REG_LDO1CTRL1 + num - 1,		\
+	.enable_mask	= MAX77686_OPMODE_MASK				\
+			<< MAX77686_OPMODE_SHIFT,			\
+}
 #define regulator_desc_ldo_low(num)		{			\
+	.name		= "LDO"#num,					\
+	.id		= MAX77686_LDO##num,				\
+	.ops		= &max77686_ldo_ops,				\
+	.type		= REGULATOR_VOLTAGE,				\
+	.owner		= THIS_MODULE,					\
+	.min_uV		= MAX77686_LDO_LOW_MINUV,			\
+	.uV_step	= MAX77686_LDO_LOW_UVSTEP,			\
+	.ramp_delay	= MAX77686_RAMP_DELAY,				\
+	.n_voltages	= MAX77686_VSEL_MASK + 1,			\
+	.vsel_reg	= MAX77686_REG_LDO1CTRL1 + num - 1,		\
+	.vsel_mask	= MAX77686_VSEL_MASK,				\
+	.enable_reg	= MAX77686_REG_LDO1CTRL1 + num - 1,		\
+	.enable_mask	= MAX77686_OPMODE_MASK				\
+			<< MAX77686_OPMODE_SHIFT,			\
+}
+#define regulator_desc_ldo1_low(num)		{			\
 	.name		= "LDO"#num,					\
 	.id		= MAX77686_LDO##num,				\
 	.ops		= &max77686_ops,				\
@@ -167,7 +311,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 #define regulator_desc_buck1(num)		{			\
 	.name		= "BUCK"#num,					\
 	.id		= MAX77686_BUCK##num,				\
-	.ops		= &max77686_ops,				\
+	.ops		= &max77686_buck1_ops,				\
 	.type		= REGULATOR_VOLTAGE,				\
 	.owner		= THIS_MODULE,					\
 	.min_uV		= MAX77686_BUCK_MINUV,				\
@@ -197,7 +341,7 @@ static struct regulator_ops max77686_buck_dvs_ops = {
 }
 
 static struct regulator_desc regulators[] = {
-	regulator_desc_ldo_low(1),
+	regulator_desc_ldo1_low(1),
 	regulator_desc_ldo_low(2),
 	regulator_desc_ldo(3),
 	regulator_desc_ldo(4),
@@ -206,13 +350,13 @@ static struct regulator_desc regulators[] = {
 	regulator_desc_ldo_low(7),
 	regulator_desc_ldo_low(8),
 	regulator_desc_ldo(9),
-	regulator_desc_ldo(10),
-	regulator_desc_ldo(11),
-	regulator_desc_ldo(12),
+	regulator_desc_lpm_ldo(10),
+	regulator_desc_lpm_ldo(11),
+	regulator_desc_lpm_ldo(12),
 	regulator_desc_ldo(13),
-	regulator_desc_ldo(14),
+	regulator_desc_lpm_ldo(14),
 	regulator_desc_ldo_low(15),
-	regulator_desc_ldo(16),
+	regulator_desc_lpm_ldo(16),
 	regulator_desc_ldo(17),
 	regulator_desc_ldo(18),
 	regulator_desc_ldo(19),
@@ -280,7 +424,7 @@ static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev,
 }
 #endif /* CONFIG_OF */
 
-static __devinit int max77686_pmic_probe(struct platform_device *pdev)
+static int max77686_pmic_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
@@ -314,12 +458,14 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev)
 
 	config.dev = &pdev->dev;
 	config.regmap = iodev->regmap;
+	config.driver_data = max77686;
 	platform_set_drvdata(pdev, max77686);
 
 	for (i = 0; i < MAX77686_REGULATORS; i++) {
 		config.init_data = pdata->regulators[i].initdata;
 		config.of_node = pdata->regulators[i].of_node;
 
+		max77686->opmode[i] = regulators[i].enable_mask;
 		max77686->rdev[i] = regulator_register(&regulators[i], &config);
 		if (IS_ERR(max77686->rdev[i])) {
 			ret = PTR_ERR(max77686->rdev[i]);
@@ -337,7 +483,7 @@ err:
 	return ret;
 }
 
-static int __devexit max77686_pmic_remove(struct platform_device *pdev)
+static int max77686_pmic_remove(struct platform_device *pdev)
 {
 	struct max77686_data *max77686 = platform_get_drvdata(pdev);
 	int i;
@@ -360,7 +506,7 @@ static struct platform_driver max77686_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = max77686_pmic_probe,
-	.remove = __devexit_p(max77686_pmic_remove),
+	.remove = max77686_pmic_remove,
 	.id_table = max77686_pmic_id,
 };
 

drivers/regulator/max8649.c

@@ -176,7 +176,7 @@ static struct regmap_config max8649_regmap_config = {
 	.val_bits = 8,
 };
 
-static int __devinit max8649_regulator_probe(struct i2c_client *client,
+static int max8649_regulator_probe(struct i2c_client *client,
 					     const struct i2c_device_id *id)
 {
 	struct max8649_platform_data *pdata = client->dev.platform_data;
@@ -271,7 +271,7 @@ static int __devinit max8649_regulator_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit max8649_regulator_remove(struct i2c_client *client)
+static int max8649_regulator_remove(struct i2c_client *client)
 {
 	struct max8649_regulator_info *info = i2c_get_clientdata(client);
 
@@ -291,7 +291,7 @@ MODULE_DEVICE_TABLE(i2c, max8649_id);
 
 static struct i2c_driver max8649_driver = {
 	.probe		= max8649_regulator_probe,
-	.remove		= __devexit_p(max8649_regulator_remove),
+	.remove		= max8649_regulator_remove,
 	.driver		= {
 		.name	= "max8649",
 	},

drivers/regulator/max8660.c

@@ -305,7 +305,7 @@ static const struct regulator_desc max8660_reg[] = {
 	},
 };
 
-static int __devinit max8660_probe(struct i2c_client *client,
+static int max8660_probe(struct i2c_client *client,
 				   const struct i2c_device_id *i2c_id)
 {
 	struct regulator_dev **rdev;
@@ -420,7 +420,7 @@ err_out:
 	return ret;
 }
 
-static int __devexit max8660_remove(struct i2c_client *client)
+static int max8660_remove(struct i2c_client *client)
 {
 	struct max8660 *max8660 = i2c_get_clientdata(client);
 	int i;
@@ -440,7 +440,7 @@ MODULE_DEVICE_TABLE(i2c, max8660_id);
 
 static struct i2c_driver max8660_driver = {
 	.probe = max8660_probe,
-	.remove = __devexit_p(max8660_remove),
+	.remove = max8660_remove,
 	.driver		= {
 		.name	= "max8660",
 		.owner	= THIS_MODULE,

drivers/regulator/max8907-regulator.c

@@ -275,7 +275,7 @@ static inline struct device_node *match_of_node(int index)
 }
 #endif
 
-static __devinit int max8907_regulator_probe(struct platform_device *pdev)
+static int max8907_regulator_probe(struct platform_device *pdev)
 {
 	struct max8907 *max8907 = dev_get_drvdata(pdev->dev.parent);
 	struct max8907_platform_data *pdata = dev_get_platdata(max8907->dev);
@@ -368,7 +368,7 @@ err_unregister_regulator:
 	return ret;
 }
 
-static __devexit int max8907_regulator_remove(struct platform_device *pdev)
+static int max8907_regulator_remove(struct platform_device *pdev)
 {
 	struct max8907_regulator *pmic = platform_get_drvdata(pdev);
 	int i;
@@ -385,7 +385,7 @@ static struct platform_driver max8907_regulator_driver = {
 		   .owner = THIS_MODULE,
 		   },
 	.probe = max8907_regulator_probe,
-	.remove = __devexit_p(max8907_regulator_remove),
+	.remove = max8907_regulator_remove,
 };
 
 static int __init max8907_regulator_init(void)

drivers/regulator/max8925-regulator.c

@@ -17,6 +17,8 @@
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8925.h>
+#include <linux/of.h>
+#include <linux/regulator/of_regulator.h>
 
 #define SD1_DVM_VMIN		850000
 #define SD1_DVM_VMAX		1000000
@@ -187,6 +189,34 @@ static struct regulator_ops max8925_regulator_ldo_ops = {
 	.enable_reg	= MAX8925_LDOCTL##_id,			\
 }
 
+#ifdef CONFIG_OF
+static struct of_regulator_match max8925_regulator_matches[] = {
+	{ .name	= "SDV1",},
+	{ .name = "SDV2",},
+	{ .name = "SDV3",},
+	{ .name = "LDO1",},
+	{ .name = "LDO2",},
+	{ .name = "LDO3",},
+	{ .name = "LDO4",},
+	{ .name = "LDO5",},
+	{ .name = "LDO6",},
+	{ .name = "LDO7",},
+	{ .name = "LDO8",},
+	{ .name = "LDO9",},
+	{ .name = "LDO10",},
+	{ .name = "LDO11",},
+	{ .name = "LDO12",},
+	{ .name = "LDO13",},
+	{ .name = "LDO14",},
+	{ .name = "LDO15",},
+	{ .name = "LDO16",},
+	{ .name = "LDO17",},
+	{ .name = "LDO18",},
+	{ .name = "LDO19",},
+	{ .name = "LDO20",},
+};
+#endif
+
 static struct max8925_regulator_info max8925_regulator_info[] = {
 	MAX8925_SDV(1, 637.5, 1425, 12.5),
 	MAX8925_SDV(2,   650, 2225,   25),
@@ -214,7 +244,37 @@ static struct max8925_regulator_info max8925_regulator_info[] = {
 	MAX8925_LDO(20, 750, 3900, 50),
 };
 
-static int __devinit max8925_regulator_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static int max8925_regulator_dt_init(struct platform_device *pdev,
+				    struct max8925_regulator_info *info,
+				    struct regulator_config *config,
+				    int ridx)
+{
+	struct device_node *nproot, *np;
+	int rcount;
+	nproot = pdev->dev.parent->of_node;
+	if (!nproot)
+		return -ENODEV;
+	np = of_find_node_by_name(nproot, "regulators");
+	if (!np) {
+		dev_err(&pdev->dev, "failed to find regulators node\n");
+		return -ENODEV;
+	}
+
+	rcount = of_regulator_match(&pdev->dev, np,
+				&max8925_regulator_matches[ridx], 1);
+	if (rcount < 0)
+		return -ENODEV;
+	config->init_data =	max8925_regulator_matches[ridx].init_data;
+	config->of_node = max8925_regulator_matches[ridx].of_node;
+
+	return 0;
+}
+#else
+#define max8925_regulator_dt_init(w, x, y, z)	(-1)
+#endif
+
+static int max8925_regulator_probe(struct platform_device *pdev)
 {
 	struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_init_data *pdata = pdev->dev.platform_data;
@@ -222,7 +282,7 @@ static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 	struct max8925_regulator_info *ri;
 	struct resource *res;
 	struct regulator_dev *rdev;
-	int i;
+	int i, regulator_idx;
 
 	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
 	if (!res) {
@@ -231,9 +291,12 @@ static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 	}
 	for (i = 0; i < ARRAY_SIZE(max8925_regulator_info); i++) {
 		ri = &max8925_regulator_info[i];
-		if (ri->vol_reg == res->start)
+		if (ri->vol_reg == res->start) {
+			regulator_idx = i;
 			break;
+		}
 	}
+
 	if (i == ARRAY_SIZE(max8925_regulator_info)) {
 		dev_err(&pdev->dev, "Failed to find regulator %llu\n",
 			(unsigned long long)res->start);
@@ -243,9 +306,12 @@ static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 	ri->chip = chip;
 
 	config.dev = &pdev->dev;
-	config.init_data = pdata;
 	config.driver_data = ri;
 
+	if (max8925_regulator_dt_init(pdev, ri, &config, regulator_idx))
+		if (pdata)
+			config.init_data = pdata;
+
 	rdev = regulator_register(&ri->desc, &config);
 	if (IS_ERR(rdev)) {
 		dev_err(&pdev->dev, "failed to register regulator %s\n",
@@ -257,7 +323,7 @@ static int __devinit max8925_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit max8925_regulator_remove(struct platform_device *pdev)
+static int max8925_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
@@ -273,7 +339,7 @@ static struct platform_driver max8925_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= max8925_regulator_probe,
-	.remove		= __devexit_p(max8925_regulator_remove),
+	.remove		= max8925_regulator_remove,
 };
 
 static int __init max8925_regulator_init(void)

drivers/regulator/max8952.c

@@ -126,7 +126,7 @@ static const struct regulator_desc regulator = {
 	.owner		= THIS_MODULE,
 };
 
-static int __devinit max8952_pmic_probe(struct i2c_client *client,
+static int max8952_pmic_probe(struct i2c_client *client,
 		const struct i2c_device_id *i2c_id)
 {
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
@@ -247,7 +247,7 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int __devexit max8952_pmic_remove(struct i2c_client *client)
+static int max8952_pmic_remove(struct i2c_client *client)
 {
 	struct max8952_data *max8952 = i2c_get_clientdata(client);
 	struct max8952_platform_data *pdata = max8952->pdata;
@@ -268,7 +268,7 @@ MODULE_DEVICE_TABLE(i2c, max8952_ids);
 
 static struct i2c_driver max8952_pmic_driver = {
 	.probe		= max8952_pmic_probe,
-	.remove		= __devexit_p(max8952_pmic_remove),
+	.remove		= max8952_pmic_remove,
 	.driver		= {
 		.name	= "max8952",
 	},

drivers/regulator/max8973-regulator.c

@@ -0,0 +1,505 @@
+/*
+ * max8973-regulator.c -- Maxim max8973
+ *
+ * Regulator driver for MAXIM 8973 DC-DC step-down switching regulator.
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/max8973-regulator.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+/* Register definitions */
+#define MAX8973_VOUT					0x0
+#define MAX8973_VOUT_DVS				0x1
+#define MAX8973_CONTROL1				0x2
+#define MAX8973_CONTROL2				0x3
+#define MAX8973_CHIPID1					0x4
+#define MAX8973_CHIPID2					0x5
+
+#define MAX8973_MAX_VOUT_REG				2
+
+/* MAX8973_VOUT */
+#define MAX8973_VOUT_ENABLE				BIT(7)
+#define MAX8973_VOUT_MASK				0x7F
+
+/* MAX8973_VOUT_DVS */
+#define MAX8973_DVS_VOUT_MASK				0x7F
+
+/* MAX8973_CONTROL1 */
+#define MAX8973_SNS_ENABLE				BIT(7)
+#define MAX8973_FPWM_EN_M				BIT(6)
+#define MAX8973_NFSR_ENABLE				BIT(5)
+#define MAX8973_AD_ENABLE				BIT(4)
+#define MAX8973_BIAS_ENABLE				BIT(3)
+#define MAX8973_FREQSHIFT_9PER				BIT(2)
+
+#define MAX8973_RAMP_12mV_PER_US			0x0
+#define MAX8973_RAMP_25mV_PER_US			0x1
+#define MAX8973_RAMP_50mV_PER_US			0x2
+#define MAX8973_RAMP_200mV_PER_US			0x3
+
+/* MAX8973_CONTROL2 */
+#define MAX8973_WDTMR_ENABLE				BIT(6)
+#define MAX8973_DISCH_ENBABLE				BIT(5)
+#define MAX8973_FT_ENABLE				BIT(4)
+
+#define MAX8973_CKKADV_TRIP_DISABLE			0xC
+#define MAX8973_CKKADV_TRIP_75mV_PER_US			0x0
+#define MAX8973_CKKADV_TRIP_150mV_PER_US		0x4
+#define MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS	0x8
+#define MAX8973_CONTROL_CLKADV_TRIP_MASK		0x00030000
+
+#define MAX8973_INDUCTOR_MIN_30_PER			0x0
+#define MAX8973_INDUCTOR_NOMINAL			0x1
+#define MAX8973_INDUCTOR_PLUS_30_PER			0x2
+#define MAX8973_INDUCTOR_PLUS_60_PER			0x3
+#define MAX8973_CONTROL_INDUCTOR_VALUE_MASK		0x00300000
+
+#define MAX8973_MIN_VOLATGE				606250
+#define MAX8973_MAX_VOLATGE				1400000
+#define MAX8973_VOLATGE_STEP				6250
+#define MAX8973_BUCK_N_VOLTAGE				0x80
+
+/* Maxim 8973 chip information */
+struct max8973_chip {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	bool enable_external_control;
+	int dvs_gpio;
+	int lru_index[MAX8973_MAX_VOUT_REG];
+	int curr_vout_val[MAX8973_MAX_VOUT_REG];
+	int curr_vout_reg;
+	int curr_gpio_val;
+	bool valid_dvs_gpio;
+};
+
+/*
+ * find_voltage_set_register: Find new voltage configuration register (VOUT).
+ * The finding of the new VOUT register will be based on the LRU mechanism.
+ * Each VOUT register will have different voltage configured . This
+ * Function will look if any of the VOUT register have requested voltage set
+ * or not.
+ *     - If it is already there then it will make that register as most
+ *       recently used and return as found so that caller need not to set
+ *       the VOUT register but need to set the proper gpios to select this
+ *       VOUT register.
+ *     - If requested voltage is not found then it will use the least
+ *       recently mechanism to get new VOUT register for new configuration
+ *       and will return not_found so that caller need to set new VOUT
+ *       register and then gpios (both).
+ */
+static bool find_voltage_set_register(struct max8973_chip *tps,
+		int req_vsel, int *vout_reg, int *gpio_val)
+{
+	int i;
+	bool found = false;
+	int new_vout_reg = tps->lru_index[MAX8973_MAX_VOUT_REG - 1];
+	int found_index = MAX8973_MAX_VOUT_REG - 1;
+
+	for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i) {
+		if (tps->curr_vout_val[tps->lru_index[i]] == req_vsel) {
+			new_vout_reg = tps->lru_index[i];
+			found_index = i;
+			found = true;
+			goto update_lru_index;
+		}
+	}
+
+update_lru_index:
+	for (i = found_index; i > 0; i--)
+		tps->lru_index[i] = tps->lru_index[i - 1];
+
+	tps->lru_index[0] = new_vout_reg;
+	*gpio_val = new_vout_reg;
+	*vout_reg = MAX8973_VOUT + new_vout_reg;
+	return found;
+}
+
+static int max8973_dcdc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(max->regmap, max->curr_vout_reg, &data);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d read failed, err = %d\n",
+			max->curr_vout_reg, ret);
+		return ret;
+	}
+	return data & MAX8973_VOUT_MASK;
+}
+
+static int max8973_dcdc_set_voltage_sel(struct regulator_dev *rdev,
+	     unsigned vsel)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	int ret;
+	bool found = false;
+	int vout_reg = max->curr_vout_reg;
+	int gpio_val = max->curr_gpio_val;
+
+	/*
+	 * If gpios are available to select the VOUT register then least
+	 * recently used register for new configuration.
+	 */
+	if (max->valid_dvs_gpio)
+		found = find_voltage_set_register(max, vsel,
+					&vout_reg, &gpio_val);
+
+	if (!found) {
+		ret = regmap_update_bits(max->regmap, vout_reg,
+					MAX8973_VOUT_MASK, vsel);
+		if (ret < 0) {
+			dev_err(max->dev, "register %d update failed, err %d\n",
+				 vout_reg, ret);
+			return ret;
+		}
+		max->curr_vout_reg = vout_reg;
+		max->curr_vout_val[gpio_val] = vsel;
+	}
+
+	/* Select proper VOUT register vio gpios */
+	if (max->valid_dvs_gpio) {
+		gpio_set_value_cansleep(max->dvs_gpio, gpio_val & 0x1);
+		max->curr_gpio_val = gpio_val;
+	}
+	return 0;
+}
+
+static int max8973_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	int ret;
+	int pwm;
+
+	/* Enable force PWM mode in FAST mode only. */
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		pwm = MAX8973_FPWM_EN_M;
+		break;
+
+	case REGULATOR_MODE_NORMAL:
+		pwm = 0;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
+				MAX8973_FPWM_EN_M, pwm);
+	if (ret < 0)
+		dev_err(max->dev, "register %d update failed, err %d\n",
+				MAX8973_CONTROL1, ret);
+	return ret;
+}
+
+static unsigned int max8973_dcdc_get_mode(struct regulator_dev *rdev)
+{
+	struct max8973_chip *max = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(max->regmap, MAX8973_CONTROL1, &data);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d read failed, err %d\n",
+				MAX8973_CONTROL1, ret);
+		return ret;
+	}
+	return (data & MAX8973_FPWM_EN_M) ?
+		REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+}
+
+static struct regulator_ops max8973_dcdc_ops = {
+	.get_voltage_sel	= max8973_dcdc_get_voltage_sel,
+	.set_voltage_sel	= max8973_dcdc_set_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_mode		= max8973_dcdc_set_mode,
+	.get_mode		= max8973_dcdc_get_mode,
+};
+
+static int __devinit max8973_init_dcdc(struct max8973_chip *max,
+		struct max8973_regulator_platform_data *pdata)
+{
+	int ret;
+	uint8_t	control1 = 0;
+	uint8_t control2 = 0;
+
+	if (pdata->control_flags & MAX8973_CONTROL_REMOTE_SENSE_ENABLE)
+		control1 |= MAX8973_SNS_ENABLE;
+
+	if (!(pdata->control_flags & MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE))
+		control1 |= MAX8973_NFSR_ENABLE;
+
+	if (pdata->control_flags & MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE)
+		control1 |= MAX8973_AD_ENABLE;
+
+	if (pdata->control_flags & MAX8973_CONTROL_BIAS_ENABLE)
+		control1 |= MAX8973_BIAS_ENABLE;
+
+	if (pdata->control_flags & MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE)
+		control1 |= MAX8973_FREQSHIFT_9PER;
+
+	/* Set ramp delay */
+	if (pdata->reg_init_data &&
+			pdata->reg_init_data->constraints.ramp_delay) {
+		if (pdata->reg_init_data->constraints.ramp_delay < 25000)
+			control1 = MAX8973_RAMP_12mV_PER_US;
+		else if (pdata->reg_init_data->constraints.ramp_delay < 50000)
+			control1 = MAX8973_RAMP_25mV_PER_US;
+		else if (pdata->reg_init_data->constraints.ramp_delay < 200000)
+			control1 = MAX8973_RAMP_50mV_PER_US;
+		else
+			control1 = MAX8973_RAMP_200mV_PER_US;
+	} else {
+		control1 = MAX8973_RAMP_12mV_PER_US;
+		max->desc.ramp_delay = 12500;
+	}
+
+	if (!(pdata->control_flags & MAX8973_CONTROL_PULL_DOWN_ENABLE))
+		control2 |= MAX8973_DISCH_ENBABLE;
+
+	/*  Clock advance trip configuration */
+	switch (pdata->control_flags & MAX8973_CONTROL_CLKADV_TRIP_MASK) {
+	case MAX8973_CONTROL_CLKADV_TRIP_DISABLED:
+		control2 |= MAX8973_CKKADV_TRIP_DISABLE;
+		break;
+
+	case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US:
+		control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US;
+		break;
+
+	case MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US:
+		control2 |= MAX8973_CKKADV_TRIP_150mV_PER_US;
+		break;
+
+	case MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS:
+		control2 |= MAX8973_CKKADV_TRIP_75mV_PER_US_HIST_DIS;
+		break;
+	}
+
+	/* Configure inductor value */
+	switch (pdata->control_flags & MAX8973_CONTROL_INDUCTOR_VALUE_MASK) {
+	case MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL:
+		control2 |= MAX8973_INDUCTOR_NOMINAL;
+		break;
+
+	case MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER:
+		control2 |= MAX8973_INDUCTOR_MIN_30_PER;
+		break;
+
+	case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER:
+		control2 |= MAX8973_INDUCTOR_PLUS_30_PER;
+		break;
+
+	case MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER:
+		control2 |= MAX8973_INDUCTOR_PLUS_60_PER;
+		break;
+	}
+
+	ret = regmap_write(max->regmap, MAX8973_CONTROL1, control1);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d write failed, err = %d",
+				MAX8973_CONTROL1, ret);
+		return ret;
+	}
+
+	ret = regmap_write(max->regmap, MAX8973_CONTROL2, control2);
+	if (ret < 0) {
+		dev_err(max->dev, "register %d write failed, err = %d",
+				MAX8973_CONTROL2, ret);
+		return ret;
+	}
+
+	/* If external control is enabled then disable EN bit */
+	if (max->enable_external_control) {
+		ret = regmap_update_bits(max->regmap, MAX8973_VOUT,
+						MAX8973_VOUT_ENABLE, 0);
+		if (ret < 0)
+			dev_err(max->dev, "register %d update failed, err = %d",
+				MAX8973_VOUT, ret);
+	}
+	return ret;
+}
+
+static const struct regmap_config max8973_regmap_config = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.max_register		= MAX8973_CHIPID2,
+	.cache_type		= REGCACHE_RBTREE,
+};
+
+static int __devinit max8973_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct max8973_regulator_platform_data *pdata;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	struct max8973_chip *max;
+	int ret;
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "No Platform data");
+		return -EIO;
+	}
+
+	max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
+	if (!max) {
+		dev_err(&client->dev, "Memory allocation for max failed\n");
+		return -ENOMEM;
+	}
+
+	max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
+	if (IS_ERR(max->regmap)) {
+		ret = PTR_ERR(max->regmap);
+		dev_err(&client->dev, "regmap init failed, err %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, max);
+	max->dev = &client->dev;
+	max->desc.name = id->name;
+	max->desc.id = 0;
+	max->desc.ops = &max8973_dcdc_ops;
+	max->desc.type = REGULATOR_VOLTAGE;
+	max->desc.owner = THIS_MODULE;
+	max->desc.min_uV = MAX8973_MIN_VOLATGE;
+	max->desc.uV_step = MAX8973_VOLATGE_STEP;
+	max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
+
+	if (!pdata->enable_ext_control) {
+		max->desc.enable_reg = MAX8973_VOUT;
+		max->desc.enable_mask = MAX8973_VOUT_ENABLE;
+		max8973_dcdc_ops.enable = regulator_enable_regmap;
+		max8973_dcdc_ops.disable = regulator_disable_regmap;
+		max8973_dcdc_ops.is_enabled = regulator_is_enabled_regmap;
+	}
+
+	max->enable_external_control = pdata->enable_ext_control;
+	max->dvs_gpio = pdata->dvs_gpio;
+	max->curr_gpio_val = pdata->dvs_def_state;
+	max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
+	max->lru_index[0] = max->curr_vout_reg;
+	max->valid_dvs_gpio = false;
+
+	if (gpio_is_valid(max->dvs_gpio)) {
+		int gpio_flags;
+		int i;
+
+		gpio_flags = (pdata->dvs_def_state) ?
+				GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
+		ret = devm_gpio_request_one(&client->dev, max->dvs_gpio,
+				gpio_flags, "max8973-dvs");
+		if (ret) {
+			dev_err(&client->dev,
+				"gpio_request for gpio %d failed, err = %d\n",
+				max->dvs_gpio, ret);
+			return ret;
+		}
+		max->valid_dvs_gpio = true;
+
+		/*
+		 * Initialize the lru index with vout_reg id
+		 * The index 0 will be most recently used and
+		 * set with the max->curr_vout_reg */
+		for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i)
+			max->lru_index[i] = i;
+		max->lru_index[0] = max->curr_vout_reg;
+		max->lru_index[max->curr_vout_reg] = 0;
+	}
+
+	ret = max8973_init_dcdc(max, pdata);
+	if (ret < 0) {
+		dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
+		return ret;
+	}
+
+	config.dev = &client->dev;
+	config.init_data = pdata->reg_init_data;
+	config.driver_data = max;
+	config.of_node = client->dev.of_node;
+	config.regmap = max->regmap;
+
+	/* Register the regulators */
+	rdev = regulator_register(&max->desc, &config);
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(max->dev, "regulator register failed, err %d\n", ret);
+		return ret;
+	}
+
+	max->rdev = rdev;
+	return 0;
+}
+
+static int __devexit max8973_remove(struct i2c_client *client)
+{
+	struct max8973_chip *max = i2c_get_clientdata(client);
+
+	regulator_unregister(max->rdev);
+	return 0;
+}
+
+static const struct i2c_device_id max8973_id[] = {
+	{.name = "max8973",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, max8973_id);
+
+static struct i2c_driver max8973_i2c_driver = {
+	.driver = {
+		.name = "max8973",
+		.owner = THIS_MODULE,
+	},
+	.probe = max8973_probe,
+	.remove = __devexit_p(max8973_remove),
+	.id_table = max8973_id,
+};
+
+static int __init max8973_init(void)
+{
+	return i2c_add_driver(&max8973_i2c_driver);
+}
+subsys_initcall(max8973_init);
+
+static void __exit max8973_cleanup(void)
+{
+	i2c_del_driver(&max8973_i2c_driver);
+}
+module_exit(max8973_cleanup);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("MAX8973 voltage regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/max8997.c

@@ -24,6 +24,7 @@
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
+#include <linux/of_gpio.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -31,6 +32,7 @@
 #include <linux/regulator/machine.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mfd/max8997-private.h>
+#include <linux/regulator/of_regulator.h>
 
 struct max8997_data {
 	struct device *dev;
@@ -933,22 +935,163 @@ static struct regulator_desc regulators[] = {
 				  max8997_charger_fixedstate_ops),
 };
 
-static __devinit int max8997_pmic_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static int max8997_pmic_dt_parse_dvs_gpio(struct max8997_dev *iodev,
+			struct max8997_platform_data *pdata,
+			struct device_node *pmic_np)
+{
+	int i, gpio;
+
+	for (i = 0; i < 3; i++) {
+		gpio = of_get_named_gpio(pmic_np,
+					"max8997,pmic-buck125-dvs-gpios", i);
+		if (!gpio_is_valid(gpio)) {
+			dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+			return -EINVAL;
+		}
+		pdata->buck125_gpios[i] = gpio;
+	}
+	return 0;
+}
+
+static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
+					struct max8997_platform_data *pdata)
+{
+	struct device_node *pmic_np, *regulators_np, *reg_np;
+	struct max8997_regulator_data *rdata;
+	unsigned int i, dvs_voltage_nr = 1, ret;
+
+	pmic_np = iodev->dev->of_node;
+	if (!pmic_np) {
+		dev_err(iodev->dev, "could not find pmic sub-node\n");
+		return -ENODEV;
+	}
+
+	regulators_np = of_find_node_by_name(pmic_np, "regulators");
+	if (!regulators_np) {
+		dev_err(iodev->dev, "could not find regulators sub-node\n");
+		return -EINVAL;
+	}
+
+	/* count the number of regulators to be supported in pmic */
+	pdata->num_regulators = 0;
+	for_each_child_of_node(regulators_np, reg_np)
+		pdata->num_regulators++;
+
+	rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+				pdata->num_regulators, GFP_KERNEL);
+	if (!rdata) {
+		dev_err(iodev->dev, "could not allocate memory for "
+						"regulator data\n");
+		return -ENOMEM;
+	}
+
+	pdata->regulators = rdata;
+	for_each_child_of_node(regulators_np, reg_np) {
+		for (i = 0; i < ARRAY_SIZE(regulators); i++)
+			if (!of_node_cmp(reg_np->name, regulators[i].name))
+				break;
+
+		if (i == ARRAY_SIZE(regulators)) {
+			dev_warn(iodev->dev, "don't know how to configure "
+				"regulator %s\n", reg_np->name);
+			continue;
+		}
+
+		rdata->id = i;
+		rdata->initdata = of_get_regulator_init_data(
+						iodev->dev, reg_np);
+		rdata->reg_node = reg_np;
+		rdata++;
+	}
+
+	if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL))
+		pdata->buck1_gpiodvs = true;
+
+	if (of_get_property(pmic_np, "max8997,pmic-buck2-uses-gpio-dvs", NULL))
+		pdata->buck2_gpiodvs = true;
+
+	if (of_get_property(pmic_np, "max8997,pmic-buck5-uses-gpio-dvs", NULL))
+		pdata->buck5_gpiodvs = true;
+
+	if (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
+						pdata->buck5_gpiodvs) {
+		ret = max8997_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+		if (ret)
+			return -EINVAL;
+
+		if (of_property_read_u32(pmic_np,
+				"max8997,pmic-buck125-default-dvs-idx",
+				&pdata->buck125_default_idx)) {
+			pdata->buck125_default_idx = 0;
+		} else {
+			if (pdata->buck125_default_idx >= 8) {
+				pdata->buck125_default_idx = 0;
+				dev_info(iodev->dev, "invalid value for "
+				"default dvs index, using 0 instead\n");
+			}
+		}
+
+		if (of_get_property(pmic_np,
+			"max8997,pmic-ignore-gpiodvs-side-effect", NULL))
+			pdata->ignore_gpiodvs_side_effect = true;
+
+		dvs_voltage_nr = 8;
+	}
+
+	if (of_property_read_u32_array(pmic_np,
+				"max8997,pmic-buck1-dvs-voltage",
+				pdata->buck1_voltage, dvs_voltage_nr)) {
+		dev_err(iodev->dev, "buck1 voltages not specified\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_array(pmic_np,
+				"max8997,pmic-buck2-dvs-voltage",
+				pdata->buck2_voltage, dvs_voltage_nr)) {
+		dev_err(iodev->dev, "buck2 voltages not specified\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_u32_array(pmic_np,
+				"max8997,pmic-buck5-dvs-voltage",
+				pdata->buck5_voltage, dvs_voltage_nr)) {
+		dev_err(iodev->dev, "buck5 voltages not specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+#else
+static int max8997_pmic_dt_parse_pdata(struct max8997_dev *iodev,
+					struct max8997_platform_data *pdata)
+{
+	return 0;
+}
+#endif /* CONFIG_OF */
+
+static int max8997_pmic_probe(struct platform_device *pdev)
 {
 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+	struct max8997_platform_data *pdata = iodev->pdata;
 	struct regulator_config config = { };
 	struct regulator_dev **rdev;
 	struct max8997_data *max8997;
 	struct i2c_client *i2c;
-	int i, ret, size;
+	int i, ret, size, nr_dvs;
 	u8 max_buck1 = 0, max_buck2 = 0, max_buck5 = 0;
 
-	if (!pdata) {
+	if (IS_ERR_OR_NULL(pdata)) {
 		dev_err(pdev->dev.parent, "No platform init data supplied.\n");
 		return -ENODEV;
 	}
 
+	if (iodev->dev->of_node) {
+		ret = max8997_pmic_dt_parse_pdata(iodev, pdata);
+		if (ret)
+			return ret;
+	}
+
 	max8997 = devm_kzalloc(&pdev->dev, sizeof(struct max8997_data),
 			       GFP_KERNEL);
 	if (!max8997)
@@ -973,7 +1116,10 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 	memcpy(max8997->buck125_gpios, pdata->buck125_gpios, sizeof(int) * 3);
 	max8997->ignore_gpiodvs_side_effect = pdata->ignore_gpiodvs_side_effect;
 
-	for (i = 0; i < 8; i++) {
+	nr_dvs = (pdata->buck1_gpiodvs || pdata->buck2_gpiodvs ||
+			pdata->buck5_gpiodvs) ? 8 : 1;
+
+	for (i = 0; i < nr_dvs; i++) {
 		max8997->buck1_vol[i] = ret =
 			max8997_get_voltage_proper_val(
 					&buck1245_voltage_map_desc,
@@ -1019,6 +1165,19 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 				max_buck5, 0x3f);
 	}
 
+	/* Initialize all the DVS related BUCK registers */
+	for (i = 0; i < nr_dvs; i++) {
+		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
+				max8997->buck1_vol[i],
+				0x3f);
+		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
+				max8997->buck2_vol[i],
+				0x3f);
+		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
+				max8997->buck5_vol[i],
+				0x3f);
+	}
+
 	/*
 	 * If buck 1, 2, and 5 do not care DVS GPIO settings, ignore them.
 	 * If at least one of them cares, set gpios.
@@ -1068,19 +1227,6 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 	max8997_update_reg(i2c, MAX8997_REG_BUCK5CTRL, (pdata->buck5_gpiodvs) ?
 			(1 << 1) : (0 << 1), 1 << 1);
 
-	/* Initialize all the DVS related BUCK registers */
-	for (i = 0; i < 8; i++) {
-		max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i,
-				max8997->buck1_vol[i],
-				0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i,
-				max8997->buck2_vol[i],
-				0x3f);
-		max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i,
-				max8997->buck5_vol[i],
-				0x3f);
-	}
-
 	/* Misc Settings */
 	max8997->ramp_delay = 10; /* set 10mV/us, which is the default */
 	max8997_write_reg(i2c, MAX8997_REG_BUCKRAMP, (0xf << 4) | 0x9);
@@ -1101,6 +1247,7 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev)
 		config.dev = max8997->dev;
 		config.init_data = pdata->regulators[i].initdata;
 		config.driver_data = max8997;
+		config.of_node = pdata->regulators[i].reg_node;
 
 		rdev[i] = regulator_register(&regulators[id], &config);
 		if (IS_ERR(rdev[i])) {
@@ -1120,7 +1267,7 @@ err_out:
 	return ret;
 }
 
-static int __devexit max8997_pmic_remove(struct platform_device *pdev)
+static int max8997_pmic_remove(struct platform_device *pdev)
 {
 	struct max8997_data *max8997 = platform_get_drvdata(pdev);
 	struct regulator_dev **rdev = max8997->rdev;
@@ -1143,7 +1290,7 @@ static struct platform_driver max8997_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = max8997_pmic_probe,
-	.remove = __devexit_p(max8997_pmic_remove),
+	.remove = max8997_pmic_remove,
 	.id_table = max8997_pmic_id,
 };
 

drivers/regulator/max8998.c

@@ -633,7 +633,7 @@ static struct regulator_desc regulators[] = {
 	}
 };
 
-static __devinit int max8998_pmic_probe(struct platform_device *pdev)
+static int max8998_pmic_probe(struct platform_device *pdev)
 {
 	struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct max8998_platform_data *pdata = dev_get_platdata(iodev->dev);
@@ -818,7 +818,7 @@ err_out:
 	return ret;
 }
 
-static int __devexit max8998_pmic_remove(struct platform_device *pdev)
+static int max8998_pmic_remove(struct platform_device *pdev)
 {
 	struct max8998_data *max8998 = platform_get_drvdata(pdev);
 	struct regulator_dev **rdev = max8998->rdev;
@@ -842,7 +842,7 @@ static struct platform_driver max8998_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = max8998_pmic_probe,
-	.remove = __devexit_p(max8998_pmic_remove),
+	.remove = max8998_pmic_remove,
 	.id_table = max8998_pmic_id,
 };
 

drivers/regulator/mc13783-regulator.c

@@ -392,7 +392,7 @@ static struct regulator_ops mc13783_gpo_regulator_ops = {
 	.set_voltage = mc13xxx_fixed_regulator_set_voltage,
 };
 
-static int __devinit mc13783_regulator_probe(struct platform_device *pdev)
+static int mc13783_regulator_probe(struct platform_device *pdev)
 {
 	struct mc13xxx_regulator_priv *priv;
 	struct mc13xxx *mc13783 = dev_get_drvdata(pdev->dev.parent);
@@ -445,7 +445,7 @@ err:
 	return ret;
 }
 
-static int __devexit mc13783_regulator_remove(struct platform_device *pdev)
+static int mc13783_regulator_remove(struct platform_device *pdev)
 {
 	struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
 	struct mc13xxx_regulator_platform_data *pdata =
@@ -465,7 +465,7 @@ static struct platform_driver mc13783_regulator_driver = {
 		.name	= "mc13783-regulator",
 		.owner	= THIS_MODULE,
 	},
-	.remove		= __devexit_p(mc13783_regulator_remove),
+	.remove		= mc13783_regulator_remove,
 	.probe		= mc13783_regulator_probe,
 };
 

drivers/regulator/mc13892-regulator.c

@@ -486,7 +486,7 @@ static unsigned int mc13892_vcam_get_mode(struct regulator_dev *rdev)
 }
 
 
-static int __devinit mc13892_regulator_probe(struct platform_device *pdev)
+static int mc13892_regulator_probe(struct platform_device *pdev)
 {
 	struct mc13xxx_regulator_priv *priv;
 	struct mc13xxx *mc13892 = dev_get_drvdata(pdev->dev.parent);
@@ -588,7 +588,7 @@ err_unlock:
 	return ret;
 }
 
-static int __devexit mc13892_regulator_remove(struct platform_device *pdev)
+static int mc13892_regulator_remove(struct platform_device *pdev)
 {
 	struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev);
 	int i;
@@ -606,7 +606,7 @@ static struct platform_driver mc13892_regulator_driver = {
 		.name	= "mc13892-regulator",
 		.owner	= THIS_MODULE,
 	},
-	.remove	= __devexit_p(mc13892_regulator_remove),
+	.remove	= mc13892_regulator_remove,
 	.probe	= mc13892_regulator_probe,
 };
 

drivers/regulator/mc13xxx-regulator-core.c

@@ -162,7 +162,7 @@ struct regulator_ops mc13xxx_fixed_regulator_ops = {
 EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops);
 
 #ifdef CONFIG_OF
-int __devinit mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
+int mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
 {
 	struct device_node *parent, *child;
 	int num = 0;
@@ -179,7 +179,7 @@ int __devinit mc13xxx_get_num_regulators_dt(struct platform_device *pdev)
 }
 EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt);
 
-struct mc13xxx_regulator_init_data * __devinit mc13xxx_parse_regulators_dt(
+struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
 	struct platform_device *pdev, struct mc13xxx_regulator *regulators,
 	int num_regulators)
 {

drivers/regulator/palmas-regulator.c

@@ -309,68 +309,22 @@ static int palmas_list_voltage_smps(struct regulator_dev *dev,
 	int id = rdev_get_id(dev);
 	int mult = 1;
 
-	if (!selector)
-		return 0;
-
 	/* Read the multiplier set in VSEL register to return
 	 * the correct voltage.
 	 */
 	if (pmic->range[id])
 		mult = 2;
 
-	/* Voltage is (0.49V + (selector * 0.01V)) * RANGE
-	 * as defined in data sheet. RANGE is either x1 or x2
-	 */
-	return  (490000 + (selector * 10000)) * mult;
-}
-
-static int palmas_get_voltage_smps_sel(struct regulator_dev *dev)
-{
-	struct palmas_pmic *pmic = rdev_get_drvdata(dev);
-	int id = rdev_get_id(dev);
-	int selector;
-	unsigned int reg;
-	unsigned int addr;
-
-	addr = palmas_regs_info[id].vsel_addr;
-
-	palmas_smps_read(pmic->palmas, addr, &reg);
-
-	selector = reg & PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
-
-	/* Adjust selector to match list_voltage ranges */
-	if ((selector > 0) && (selector < 6))
-		selector = 6;
-	if (!selector)
-		selector = 5;
-	if (selector > 121)
-		selector = 121;
-	selector -= 5;
-
-	return selector;
-}
-
-static int palmas_set_voltage_smps_sel(struct regulator_dev *dev,
-		unsigned selector)
-{
-	struct palmas_pmic *pmic = rdev_get_drvdata(dev);
-	int id = rdev_get_id(dev);
-	unsigned int reg = 0;
-	unsigned int addr;
-
-	addr = palmas_regs_info[id].vsel_addr;
-
-	/* Make sure we don't change the value of RANGE */
-	if (pmic->range[id])
-		reg |= PALMAS_SMPS12_VOLTAGE_RANGE;
-
-	/* Adjust the linux selector into range used in VSEL register */
-	if (selector)
-		reg |= selector + 5;
-
-	palmas_smps_write(pmic->palmas, addr, reg);
-
-	return 0;
+	if (selector == 0)
+		return 0;
+	else if (selector < 6)
+		return 500000 * mult;
+	else
+		/* Voltage is linear mapping starting from selector 6,
+		 * volt = (0.49V + ((selector - 5) * 0.01V)) * RANGE
+		 * RANGE is either x1 or x2
+		 */
+		return (490000 + ((selector - 5) * 10000)) * mult;
 }
 
 static int palmas_map_voltage_smps(struct regulator_dev *rdev,
@@ -386,11 +340,11 @@ static int palmas_map_voltage_smps(struct regulator_dev *rdev,
 	if (pmic->range[id]) { /* RANGE is x2 */
 		if (min_uV < 1000000)
 			min_uV = 1000000;
-		ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1;
+		ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 6;
 	} else {		/* RANGE is x1 */
 		if (min_uV < 500000)
 			min_uV = 500000;
-		ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1;
+		ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 6;
 	}
 
 	/* Map back into a voltage to verify we're still in bounds */
@@ -407,8 +361,8 @@ static struct regulator_ops palmas_ops_smps = {
 	.disable		= palmas_disable_smps,
 	.set_mode		= palmas_set_mode_smps,
 	.get_mode		= palmas_get_mode_smps,
-	.get_voltage_sel	= palmas_get_voltage_smps_sel,
-	.set_voltage_sel	= palmas_set_voltage_smps_sel,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
 	.list_voltage		= palmas_list_voltage_smps,
 	.map_voltage		= palmas_map_voltage_smps,
 };
@@ -436,44 +390,14 @@ static int palmas_is_enabled_ldo(struct regulator_dev *dev)
 	return !!(reg);
 }
 
-static int palmas_list_voltage_ldo(struct regulator_dev *dev,
-					unsigned selector)
-{
-	if (!selector)
-		return 0;
-
-	/* voltage is 0.85V + (selector * 0.05v) */
-	return  850000 + (selector * 50000);
-}
-
-static int palmas_map_voltage_ldo(struct regulator_dev *rdev,
-		int min_uV, int max_uV)
-{
-	int ret, voltage;
-
-	if (min_uV == 0)
-		return 0;
-
-	if (min_uV < 900000)
-		min_uV = 900000;
-	ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1;
-
-	/* Map back into a voltage to verify we're still in bounds */
-	voltage = palmas_list_voltage_ldo(rdev, ret);
-	if (voltage < min_uV || voltage > max_uV)
-		return -EINVAL;
-
-	return ret;
-}
-
 static struct regulator_ops palmas_ops_ldo = {
 	.is_enabled		= palmas_is_enabled_ldo,
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
-	.list_voltage		= palmas_list_voltage_ldo,
-	.map_voltage		= palmas_map_voltage_ldo,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
 };
 
 /*
@@ -595,7 +519,7 @@ static struct of_regulator_match palmas_matches[] = {
 	{ .name = "ldousb", },
 };
 
-static void __devinit palmas_dt_to_pdata(struct device *dev,
+static void palmas_dt_to_pdata(struct device *dev,
 		struct device_node *node,
 		struct palmas_pmic_platform_data *pdata)
 {
@@ -663,7 +587,7 @@ static void __devinit palmas_dt_to_pdata(struct device *dev,
 }
 
 
-static __devinit int palmas_probe(struct platform_device *pdev)
+static int palmas_probe(struct platform_device *pdev)
 {
 	struct palmas *palmas = dev_get_drvdata(pdev->dev.parent);
 	struct palmas_pmic_platform_data *pdata = pdev->dev.platform_data;
@@ -733,6 +657,14 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 				continue;
 		}
 
+		/* Initialise sleep/init values from platform data */
+		if (pdata && pdata->reg_init[id]) {
+			reg_init = pdata->reg_init[id];
+			ret = palmas_smps_init(palmas, id, reg_init);
+			if (ret)
+				goto err_unregister_regulator;
+		}
+
 		/* Register the regulators */
 		pmic->desc[id].name = palmas_regs_info[id].name;
 		pmic->desc[id].id = id;
@@ -753,29 +685,11 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 			pmic->desc[id].uV_step = 1250000;
 			break;
 		default:
-			pmic->desc[id].ops = &palmas_ops_smps;
-			pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
-		}
-
-		pmic->desc[id].type = REGULATOR_VOLTAGE;
-		pmic->desc[id].owner = THIS_MODULE;
-
-		/* Initialise sleep/init values from platform data */
-		if (pdata) {
-			reg_init = pdata->reg_init[id];
-			if (reg_init) {
-				ret = palmas_smps_init(palmas, id, reg_init);
-				if (ret)
-					goto err_unregister_regulator;
-			}
-		}
-
-		/*
-		 * read and store the RANGE bit for later use
-		 * This must be done before regulator is probed otherwise
-		 * we error in probe with unsupportable ranges.
-		 */
-		if (id != PALMAS_REG_SMPS10) {
+			/*
+			 * Read and store the RANGE bit for later use
+			 * This must be done before regulator is probed,
+			 * otherwise we error in probe with unsupportable ranges.
+			 */
 			addr = palmas_regs_info[id].vsel_addr;
 
 			ret = palmas_smps_read(pmic->palmas, addr, &reg);
@@ -783,8 +697,19 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 				goto err_unregister_regulator;
 			if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)
 				pmic->range[id] = 1;
+
+			pmic->desc[id].ops = &palmas_ops_smps;
+			pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
+			pmic->desc[id].vsel_reg =
+					PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+						palmas_regs_info[id].vsel_addr);
+			pmic->desc[id].vsel_mask =
+					PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
 		}
 
+		pmic->desc[id].type = REGULATOR_VOLTAGE;
+		pmic->desc[id].owner = THIS_MODULE;
+
 		if (pdata)
 			config.init_data = pdata->reg_data[id];
 		else
@@ -821,6 +746,9 @@ static __devinit int palmas_probe(struct platform_device *pdev)
 
 		pmic->desc[id].type = REGULATOR_VOLTAGE;
 		pmic->desc[id].owner = THIS_MODULE;
+		pmic->desc[id].min_uV = 900000;
+		pmic->desc[id].uV_step = 50000;
+		pmic->desc[id].linear_min_sel = 1;
 		pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
 						palmas_regs_info[id].vsel_addr);
 		pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
@@ -868,7 +796,7 @@ err_unregister_regulator:
 	return ret;
 }
 
-static int __devexit palmas_remove(struct platform_device *pdev)
+static int palmas_remove(struct platform_device *pdev)
 {
 	struct palmas_pmic *pmic = platform_get_drvdata(pdev);
 	int id;
@@ -890,7 +818,7 @@ static struct platform_driver palmas_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = palmas_probe,
-	.remove = __devexit_p(palmas_remove),
+	.remove = palmas_remove,
 };
 
 static int __init palmas_init(void)

drivers/regulator/pcap-regulator.c

@@ -236,7 +236,7 @@ static const struct regulator_desc pcap_regulators[] = {
 	VREG(VAUX4), VREG(VSIM), VREG(VSIM2), VREG(VVIB), VREG(SW1), VREG(SW2),
 };
 
-static int __devinit pcap_regulator_probe(struct platform_device *pdev)
+static int pcap_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 	void *pcap = dev_get_drvdata(pdev->dev.parent);
@@ -255,7 +255,7 @@ static int __devinit pcap_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit pcap_regulator_remove(struct platform_device *pdev)
+static int pcap_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
@@ -271,7 +271,7 @@ static struct platform_driver pcap_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe	= pcap_regulator_probe,
-	.remove	= __devexit_p(pcap_regulator_remove),
+	.remove	= pcap_regulator_remove,
 };
 
 static int __init pcap_regulator_init(void)

drivers/regulator/pcf50633-regulator.c

@@ -24,12 +24,15 @@
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/pmic.h>
 
-#define PCF50633_REGULATOR(_name, _id, _n)			\
+#define PCF50633_REGULATOR(_name, _id, _min_uV, _uV_step, _min_sel, _n) \
 	{							\
 		.name = _name,					\
 		.id = PCF50633_REGULATOR_##_id,			\
 		.ops = &pcf50633_regulator_ops,			\
 		.n_voltages = _n,				\
+		.min_uV = _min_uV,				\
+		.uV_step = _uV_step,				\
+		.linear_min_sel = _min_sel,			\
 		.type = REGULATOR_VOLTAGE,			\
 		.owner = THIS_MODULE,				\
 		.vsel_reg = PCF50633_REG_##_id##OUT,		\
@@ -38,165 +41,42 @@
 		.enable_mask = PCF50633_REGULATOR_ON,		\
 	}
 
-/* Bits from voltage value */
-static u8 auto_voltage_bits(unsigned int millivolts)
-{
-	if (millivolts < 1800)
-		return 0x2f;
-	if (millivolts > 3800)
-		return 0xff;
-
-	millivolts -= 625;
-
-	return millivolts / 25;
-}
-
-static u8 down_voltage_bits(unsigned int millivolts)
-{
-	if (millivolts < 625)
-		return 0;
-	else if (millivolts > 3000)
-		return 0xff;
-
-	millivolts -= 625;
-
-	return millivolts / 25;
-}
-
-static u8 ldo_voltage_bits(unsigned int millivolts)
-{
-	if (millivolts < 900)
-		return 0;
-	else if (millivolts > 3600)
-		return 0x1f;
-
-	millivolts -= 900;
-	return millivolts / 100;
-}
-
-/* Obtain voltage value from bits */
-static unsigned int auto_voltage_value(u8 bits)
-{
-	/* AUTOOUT: 00000000 to 00101110 are reserved.
-	 * Return 0 for bits in reserved range, which means this selector code
-	 * can't be used on this system */
-	if (bits < 0x2f)
-		return 0;
-
-	return 625 + (bits * 25);
-}
-
-
-static unsigned int down_voltage_value(u8 bits)
-{
-	return 625 + (bits * 25);
-}
-
-
-static unsigned int ldo_voltage_value(u8 bits)
-{
-	bits &= 0x1f;
-
-	return 900 + (bits * 100);
-}
-
-static int pcf50633_regulator_map_voltage(struct regulator_dev *rdev,
-					  int min_uV, int max_uV)
-{
-	struct pcf50633 *pcf;
-	int regulator_id, millivolts;
-	u8 volt_bits;
-
-	pcf = rdev_get_drvdata(rdev);
-
-	regulator_id = rdev_get_id(rdev);
-	if (regulator_id >= PCF50633_NUM_REGULATORS)
-		return -EINVAL;
-
-	millivolts = min_uV / 1000;
-
-	switch (regulator_id) {
-	case PCF50633_REGULATOR_AUTO:
-		volt_bits = auto_voltage_bits(millivolts);
-		break;
-	case PCF50633_REGULATOR_DOWN1:
-	case PCF50633_REGULATOR_DOWN2:
-		volt_bits = down_voltage_bits(millivolts);
-		break;
-	case PCF50633_REGULATOR_LDO1:
-	case PCF50633_REGULATOR_LDO2:
-	case PCF50633_REGULATOR_LDO3:
-	case PCF50633_REGULATOR_LDO4:
-	case PCF50633_REGULATOR_LDO5:
-	case PCF50633_REGULATOR_LDO6:
-	case PCF50633_REGULATOR_HCLDO:
-	case PCF50633_REGULATOR_MEMLDO:
-		volt_bits = ldo_voltage_bits(millivolts);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return volt_bits;
-}
-
-static int pcf50633_regulator_list_voltage(struct regulator_dev *rdev,
-						unsigned int index)
-{
-	int regulator_id = rdev_get_id(rdev);
-
-	int millivolts;
-
-	switch (regulator_id) {
-	case PCF50633_REGULATOR_AUTO:
-		millivolts = auto_voltage_value(index);
-		break;
-	case PCF50633_REGULATOR_DOWN1:
-	case PCF50633_REGULATOR_DOWN2:
-		millivolts = down_voltage_value(index);
-		break;
-	case PCF50633_REGULATOR_LDO1:
-	case PCF50633_REGULATOR_LDO2:
-	case PCF50633_REGULATOR_LDO3:
-	case PCF50633_REGULATOR_LDO4:
-	case PCF50633_REGULATOR_LDO5:
-	case PCF50633_REGULATOR_LDO6:
-	case PCF50633_REGULATOR_HCLDO:
-	case PCF50633_REGULATOR_MEMLDO:
-		millivolts = ldo_voltage_value(index);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return millivolts * 1000;
-}
-
 static struct regulator_ops pcf50633_regulator_ops = {
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.list_voltage = pcf50633_regulator_list_voltage,
-	.map_voltage = pcf50633_regulator_map_voltage,
+	.list_voltage = regulator_list_voltage_linear,
+	.map_voltage = regulator_map_voltage_linear,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 };
 
 static const struct regulator_desc regulators[] = {
-	[PCF50633_REGULATOR_AUTO] = PCF50633_REGULATOR("auto", AUTO, 128),
-	[PCF50633_REGULATOR_DOWN1] = PCF50633_REGULATOR("down1", DOWN1, 96),
-	[PCF50633_REGULATOR_DOWN2] = PCF50633_REGULATOR("down2", DOWN2, 96),
-	[PCF50633_REGULATOR_LDO1] = PCF50633_REGULATOR("ldo1", LDO1, 28),
-	[PCF50633_REGULATOR_LDO2] = PCF50633_REGULATOR("ldo2", LDO2, 28),
-	[PCF50633_REGULATOR_LDO3] = PCF50633_REGULATOR("ldo3", LDO3, 28),
-	[PCF50633_REGULATOR_LDO4] = PCF50633_REGULATOR("ldo4", LDO4, 28),
-	[PCF50633_REGULATOR_LDO5] = PCF50633_REGULATOR("ldo5", LDO5, 28),
-	[PCF50633_REGULATOR_LDO6] = PCF50633_REGULATOR("ldo6", LDO6, 28),
-	[PCF50633_REGULATOR_HCLDO] = PCF50633_REGULATOR("hcldo", HCLDO, 28),
-	[PCF50633_REGULATOR_MEMLDO] = PCF50633_REGULATOR("memldo", MEMLDO, 28),
+	[PCF50633_REGULATOR_AUTO] =
+		PCF50633_REGULATOR("auto", AUTO, 1800000, 25000, 0x2f, 128),
+	[PCF50633_REGULATOR_DOWN1] =
+		PCF50633_REGULATOR("down1", DOWN1, 625000, 25000, 0, 96),
+	[PCF50633_REGULATOR_DOWN2] =
+		PCF50633_REGULATOR("down2", DOWN2, 625000, 25000, 0, 96),
+	[PCF50633_REGULATOR_LDO1] =
+		PCF50633_REGULATOR("ldo1", LDO1, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO2] =
+		PCF50633_REGULATOR("ldo2", LDO2, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO3] =
+		PCF50633_REGULATOR("ldo3", LDO3, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO4] =
+		PCF50633_REGULATOR("ldo4", LDO4, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO5] =
+		PCF50633_REGULATOR("ldo5", LDO5, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_LDO6] =
+		PCF50633_REGULATOR("ldo6", LDO6, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_HCLDO] =
+		PCF50633_REGULATOR("hcldo", HCLDO, 900000, 100000, 0, 28),
+	[PCF50633_REGULATOR_MEMLDO] =
+		PCF50633_REGULATOR("memldo", MEMLDO, 900000, 100000, 0, 28),
 };
 
-static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
+static int pcf50633_regulator_probe(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev;
 	struct pcf50633 *pcf;
@@ -222,7 +102,7 @@ static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit pcf50633_regulator_remove(struct platform_device *pdev)
+static int pcf50633_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
@@ -237,7 +117,7 @@ static struct platform_driver pcf50633_regulator_driver = {
 		.name = "pcf50633-regltr",
 	},
 	.probe = pcf50633_regulator_probe,
-	.remove = __devexit_p(pcf50633_regulator_remove),
+	.remove = pcf50633_regulator_remove,
 };
 
 static int __init pcf50633_regulator_init(void)

drivers/regulator/rc5t583-regulator.c

@@ -119,7 +119,7 @@ static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
 	RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133),
 };
 
-static int __devinit rc5t583_regulator_probe(struct platform_device *pdev)
+static int rc5t583_regulator_probe(struct platform_device *pdev)
 {
 	struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
 	struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
@@ -198,7 +198,7 @@ clean_exit:
 	return ret;
 }
 
-static int __devexit rc5t583_regulator_remove(struct platform_device *pdev)
+static int rc5t583_regulator_remove(struct platform_device *pdev)
 {
 	struct rc5t583_regulator *regs = platform_get_drvdata(pdev);
 	int id;
@@ -214,7 +214,7 @@ static struct platform_driver rc5t583_regulator_driver = {
 		.owner	= THIS_MODULE,
 	},
 	.probe		= rc5t583_regulator_probe,
-	.remove		= __devexit_p(rc5t583_regulator_remove),
+	.remove		= rc5t583_regulator_remove,
 };
 
 static int __init rc5t583_regulator_init(void)

drivers/regulator/s2mps11.c

@@ -231,7 +231,7 @@ static struct regulator_desc regulators[] = {
 	regulator_desc_buck10,
 };
 
-static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
+static int s2mps11_pmic_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
@@ -269,16 +269,16 @@ static __devinit int s2mps11_pmic_probe(struct platform_device *pdev)
 
 	if (ramp_enable) {
 		if (s2mps11->buck2_ramp)
-			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay2) >> 6;
+			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay2) << 6;
 		if (s2mps11->buck3_ramp || s2mps11->buck4_ramp)
-			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay34) >> 4;
+			ramp_reg |= get_ramp_delay(s2mps11->ramp_delay34) << 4;
 		sec_reg_write(iodev, S2MPS11_REG_RAMP, ramp_reg | ramp_enable);
 	}
 
 	ramp_reg &= 0x00;
-	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay5) >> 6;
-	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay16) >> 4;
-	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay7810) >> 2;
+	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay5) << 6;
+	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay16) << 4;
+	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay7810) << 2;
 	ramp_reg |= get_ramp_delay(s2mps11->ramp_delay9);
 	sec_reg_write(iodev, S2MPS11_REG_RAMP_BUCK, ramp_reg);
 
@@ -307,7 +307,7 @@ err:
 	return ret;
 }
 
-static int __devexit s2mps11_pmic_remove(struct platform_device *pdev)
+static int s2mps11_pmic_remove(struct platform_device *pdev)
 {
 	struct s2mps11_info *s2mps11 = platform_get_drvdata(pdev);
 	int i;
@@ -330,7 +330,7 @@ static struct platform_driver s2mps11_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = s2mps11_pmic_probe,
-	.remove = __devexit_p(s2mps11_pmic_remove),
+	.remove = s2mps11_pmic_remove,
 	.id_table = s2mps11_pmic_id,
 };
 

drivers/regulator/s5m8767.c

@@ -168,7 +168,7 @@ static unsigned int s5m8767_opmode_reg[][4] = {
 static int s5m8767_get_register(struct regulator_dev *rdev, int *reg,
 				int *enable_ctrl)
 {
-	int reg_id = rdev_get_id(rdev);
+	int i, reg_id = rdev_get_id(rdev);
 	unsigned int mode;
 	struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
 
@@ -195,8 +195,17 @@ static int s5m8767_get_register(struct regulator_dev *rdev, int *reg,
 		return -EINVAL;
 	}
 
-	mode = s5m8767->opmode[reg_id].mode;
-	*enable_ctrl = s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT;
+	for (i = 0; i < s5m8767->num_regulators; i++) {
+		if (s5m8767->opmode[i].id == reg_id) {
+			mode = s5m8767->opmode[i].mode;
+			break;
+		}
+	}
+
+	if (i < s5m8767->num_regulators)
+		*enable_ctrl =
+		s5m8767_opmode_reg[reg_id][mode] << S5M8767_ENCTRL_SHIFT;
+
 	return 0;
 }
 
@@ -263,17 +272,17 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
 		reg = S5M8767_REG_BUCK1CTRL2;
 		break;
 	case S5M8767_BUCK2:
-		reg = S5M8767_REG_BUCK2DVS2;
+		reg = S5M8767_REG_BUCK2DVS1;
 		if (s5m8767->buck2_gpiodvs)
 			reg += s5m8767->buck_gpioindex;
 		break;
 	case S5M8767_BUCK3:
-		reg = S5M8767_REG_BUCK3DVS2;
+		reg = S5M8767_REG_BUCK3DVS1;
 		if (s5m8767->buck3_gpiodvs)
 			reg += s5m8767->buck_gpioindex;
 		break;
 	case S5M8767_BUCK4:
-		reg = S5M8767_REG_BUCK4DVS2;
+		reg = S5M8767_REG_BUCK4DVS1;
 		if (s5m8767->buck4_gpiodvs)
 			reg += s5m8767->buck_gpioindex;
 		break;
@@ -499,7 +508,7 @@ static struct regulator_desc regulators[] = {
 	s5m8767_regulator_desc(BUCK9),
 };
 
-static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
+static int s5m8767_pmic_probe(struct platform_device *pdev)
 {
 	struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
 	struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
@@ -547,7 +556,7 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
 	rdev = s5m8767->rdev;
 	s5m8767->dev = &pdev->dev;
 	s5m8767->iodev = iodev;
-	s5m8767->num_regulators = S5M8767_REG_MAX - 2;
+	s5m8767->num_regulators = pdata->num_regulators;
 	platform_set_drvdata(pdev, s5m8767);
 
 	s5m8767->buck_gpioindex = pdata->buck_default_idx;
@@ -617,9 +626,16 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (gpio_is_valid(pdata->buck_gpios[0]) &&
-		gpio_is_valid(pdata->buck_gpios[1]) &&
-		gpio_is_valid(pdata->buck_gpios[2])) {
+	if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+						pdata->buck4_gpiodvs) {
+
+		if (!gpio_is_valid(pdata->buck_gpios[0]) ||
+			!gpio_is_valid(pdata->buck_gpios[1]) ||
+			!gpio_is_valid(pdata->buck_gpios[2])) {
+			dev_err(&pdev->dev, "GPIO NOT VALID\n");
+			return -EINVAL;
+		}
+
 		ret = devm_gpio_request(&pdev->dev, pdata->buck_gpios[0],
 					"S5M8767 SET1");
 		if (ret)
@@ -644,10 +660,6 @@ static __devinit int s5m8767_pmic_probe(struct platform_device *pdev)
 		/* SET3 GPIO */
 		gpio_direction_output(pdata->buck_gpios[2],
 				(s5m8767->buck_gpioindex >> 0) & 0x1);
-	} else {
-		dev_err(&pdev->dev, "GPIO NOT VALID\n");
-		ret = -EINVAL;
-		return ret;
 	}
 
 	ret = devm_gpio_request(&pdev->dev, pdata->buck_ds[0], "S5M8767 DS2");
@@ -773,7 +785,7 @@ err:
 	return ret;
 }
 
-static int __devexit s5m8767_pmic_remove(struct platform_device *pdev)
+static int s5m8767_pmic_remove(struct platform_device *pdev)
 {
 	struct s5m8767_info *s5m8767 = platform_get_drvdata(pdev);
 	struct regulator_dev **rdev = s5m8767->rdev;
@@ -798,7 +810,7 @@ static struct platform_driver s5m8767_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = s5m8767_pmic_probe,
-	.remove = __devexit_p(s5m8767_pmic_remove),
+	.remove = s5m8767_pmic_remove,
 	.id_table = s5m8767_pmic_id,
 };
 

drivers/regulator/tps51632-regulator.c

@@ -0,0 +1,342 @@
+/*
+ * tps51632-regulator.c -- TI TPS51632
+ *
+ * Regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down Driverless
+ * Controller with serial VID control and DVFS.
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/tps51632-regulator.h>
+#include <linux/slab.h>
+
+/* Register definitions */
+#define TPS51632_VOLTAGE_SELECT_REG		0x0
+#define TPS51632_VOLTAGE_BASE_REG		0x1
+#define TPS51632_OFFSET_REG			0x2
+#define TPS51632_IMON_REG			0x3
+#define TPS51632_VMAX_REG			0x4
+#define TPS51632_DVFS_CONTROL_REG		0x5
+#define TPS51632_POWER_STATE_REG		0x6
+#define TPS51632_SLEW_REGS			0x7
+#define TPS51632_FAULT_REG			0x14
+
+#define TPS51632_MAX_REG			0x15
+
+#define TPS51632_VOUT_MASK			0x7F
+#define TPS51632_VOUT_OFFSET_MASK		0x1F
+#define TPS51632_VMAX_MASK			0x7F
+#define TPS51632_VMAX_LOCK			0x80
+
+/* TPS51632_DVFS_CONTROL_REG */
+#define TPS51632_DVFS_PWMEN			0x1
+#define TPS51632_DVFS_STEP_20			0x2
+#define TPS51632_DVFS_VMAX_PG			0x4
+#define TPS51632_DVFS_PWMRST			0x8
+#define TPS51632_DVFS_OCA_EN			0x10
+#define TPS51632_DVFS_FCCM			0x20
+
+/* TPS51632_POWER_STATE_REG */
+#define TPS51632_POWER_STATE_MASK		0x03
+#define TPS51632_POWER_STATE_MULTI_PHASE_CCM	0x0
+#define TPS51632_POWER_STATE_SINGLE_PHASE_CCM	0x1
+#define TPS51632_POWER_STATE_SINGLE_PHASE_DCM	0x2
+
+#define TPS51632_MIN_VOLATGE			500000
+#define TPS51632_MAX_VOLATGE			1520000
+#define TPS51632_VOLATGE_STEP_10mV		10000
+#define TPS51632_VOLATGE_STEP_20mV		20000
+#define TPS51632_MAX_VSEL			0x7F
+#define TPS51632_MIN_VSEL			0x19
+#define TPS51632_DEFAULT_RAMP_DELAY		6000
+#define TPS51632_VOLT_VSEL(uV)					\
+		(DIV_ROUND_UP(uV - TPS51632_MIN_VOLATGE,	\
+			TPS51632_VOLATGE_STEP_10mV) +		\
+			TPS51632_MIN_VSEL)
+
+/* TPS51632 chip information */
+struct tps51632_chip {
+	struct device *dev;
+	struct regulator_desc desc;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	bool enable_pwm_dvfs;
+};
+
+static int tps51632_dcdc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+	unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
+	int vsel;
+
+	if (tps->enable_pwm_dvfs)
+		reg = TPS51632_VOLTAGE_BASE_REG;
+
+	ret = regmap_read(tps->regmap, reg, &data);
+	if (ret < 0) {
+		dev_err(tps->dev, "reg read failed, err %d\n", ret);
+		return ret;
+	}
+
+	vsel = data & TPS51632_VOUT_MASK;
+	return vsel;
+}
+
+static int tps51632_dcdc_set_voltage_sel(struct regulator_dev *rdev,
+		unsigned selector)
+{
+	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
+	int ret;
+	unsigned int reg = TPS51632_VOLTAGE_SELECT_REG;
+
+	if (tps->enable_pwm_dvfs)
+		reg = TPS51632_VOLTAGE_BASE_REG;
+
+	if (selector > TPS51632_MAX_VSEL)
+		return -EINVAL;
+
+	ret = regmap_write(tps->regmap, reg, selector);
+	if (ret < 0)
+		dev_err(tps->dev, "reg write failed, err %d\n", ret);
+	return ret;
+}
+
+static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
+		int ramp_delay)
+{
+	struct tps51632_chip *tps = rdev_get_drvdata(rdev);
+	int bit = ramp_delay/6000;
+	int ret;
+
+	if (bit)
+		bit--;
+	ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
+	if (ret < 0)
+		dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);
+	return ret;
+}
+
+static struct regulator_ops tps51632_dcdc_ops = {
+	.get_voltage_sel	= tps51632_dcdc_get_voltage_sel,
+	.set_voltage_sel	= tps51632_dcdc_set_voltage_sel,
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_ramp_delay		= tps51632_dcdc_set_ramp_delay,
+};
+
+static int tps51632_init_dcdc(struct tps51632_chip *tps,
+		struct tps51632_regulator_platform_data *pdata)
+{
+	int ret;
+	uint8_t	control = 0;
+	int vsel;
+
+	if (!pdata->enable_pwm_dvfs)
+		goto skip_pwm_config;
+
+	control |= TPS51632_DVFS_PWMEN;
+	tps->enable_pwm_dvfs = pdata->enable_pwm_dvfs;
+	vsel = TPS51632_VOLT_VSEL(pdata->base_voltage_uV);
+	ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_BASE_REG, vsel);
+	if (ret < 0) {
+		dev_err(tps->dev, "BASE reg write failed, err %d\n", ret);
+		return ret;
+	}
+
+	if (pdata->dvfs_step_20mV)
+		control |= TPS51632_DVFS_STEP_20;
+
+	if (pdata->max_voltage_uV) {
+		unsigned int vmax;
+		/**
+		 * TPS51632 hw behavior: VMAX register can be write only
+		 * once as it get locked after first write. The lock get
+		 * reset only when device is power-reset.
+		 * Write register only when lock bit is not enabled.
+		 */
+		ret = regmap_read(tps->regmap, TPS51632_VMAX_REG, &vmax);
+		if (ret < 0) {
+			dev_err(tps->dev, "VMAX read failed, err %d\n", ret);
+			return ret;
+		}
+		if (!(vmax & TPS51632_VMAX_LOCK)) {
+			vsel = TPS51632_VOLT_VSEL(pdata->max_voltage_uV);
+			ret = regmap_write(tps->regmap, TPS51632_VMAX_REG,
+					vsel);
+			if (ret < 0) {
+				dev_err(tps->dev,
+					"VMAX write failed, err %d\n", ret);
+				return ret;
+			}
+		}
+	}
+
+skip_pwm_config:
+	ret = regmap_write(tps->regmap, TPS51632_DVFS_CONTROL_REG, control);
+	if (ret < 0)
+		dev_err(tps->dev, "DVFS reg write failed, err %d\n", ret);
+	return ret;
+}
+
+static bool rd_wr_reg(struct device *dev, unsigned int reg)
+{
+	if ((reg >= 0x8) && (reg <= 0x10))
+		return false;
+	return true;
+}
+
+static const struct regmap_config tps51632_regmap_config = {
+	.reg_bits		= 8,
+	.val_bits		= 8,
+	.writeable_reg		= rd_wr_reg,
+	.readable_reg		= rd_wr_reg,
+	.max_register		= TPS51632_MAX_REG - 1,
+	.cache_type		= REGCACHE_RBTREE,
+};
+
+static int tps51632_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct tps51632_regulator_platform_data *pdata;
+	struct regulator_dev *rdev;
+	struct tps51632_chip *tps;
+	int ret;
+	struct regulator_config config = { };
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "No Platform data\n");
+		return -EINVAL;
+	}
+
+	if (pdata->enable_pwm_dvfs) {
+		if ((pdata->base_voltage_uV < TPS51632_MIN_VOLATGE) ||
+		    (pdata->base_voltage_uV > TPS51632_MAX_VOLATGE)) {
+			dev_err(&client->dev, "Invalid base_voltage_uV setting\n");
+			return -EINVAL;
+		}
+
+		if ((pdata->max_voltage_uV) &&
+		    ((pdata->max_voltage_uV < TPS51632_MIN_VOLATGE) ||
+		     (pdata->max_voltage_uV > TPS51632_MAX_VOLATGE))) {
+			dev_err(&client->dev, "Invalid max_voltage_uV setting\n");
+			return -EINVAL;
+		}
+	}
+
+	tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+	if (!tps) {
+		dev_err(&client->dev, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	tps->dev = &client->dev;
+	tps->desc.name = id->name;
+	tps->desc.id = 0;
+	tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
+	tps->desc.min_uV = TPS51632_MIN_VOLATGE;
+	tps->desc.uV_step = TPS51632_VOLATGE_STEP_10mV;
+	tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
+	tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
+	tps->desc.ops = &tps51632_dcdc_ops;
+	tps->desc.type = REGULATOR_VOLTAGE;
+	tps->desc.owner = THIS_MODULE;
+
+	tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config);
+	if (IS_ERR(tps->regmap)) {
+		ret = PTR_ERR(tps->regmap);
+		dev_err(&client->dev, "regmap init failed, err %d\n", ret);
+		return ret;
+	}
+	i2c_set_clientdata(client, tps);
+
+	ret = tps51632_init_dcdc(tps, pdata);
+	if (ret < 0) {
+		dev_err(tps->dev, "Init failed, err = %d\n", ret);
+		return ret;
+	}
+
+	/* Register the regulators */
+	config.dev = &client->dev;
+	config.init_data = pdata->reg_init_data;
+	config.driver_data = tps;
+	config.regmap = tps->regmap;
+	config.of_node = client->dev.of_node;
+
+	rdev = regulator_register(&tps->desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(tps->dev, "regulator register failed\n");
+		return PTR_ERR(rdev);
+	}
+
+	tps->rdev = rdev;
+	return 0;
+}
+
+static int tps51632_remove(struct i2c_client *client)
+{
+	struct tps51632_chip *tps = i2c_get_clientdata(client);
+
+	regulator_unregister(tps->rdev);
+	return 0;
+}
+
+static const struct i2c_device_id tps51632_id[] = {
+	{.name = "tps51632",},
+	{},
+};
+
+MODULE_DEVICE_TABLE(i2c, tps51632_id);
+
+static struct i2c_driver tps51632_i2c_driver = {
+	.driver = {
+		.name = "tps51632",
+		.owner = THIS_MODULE,
+	},
+	.probe = tps51632_probe,
+	.remove = tps51632_remove,
+	.id_table = tps51632_id,
+};
+
+static int __init tps51632_init(void)
+{
+	return i2c_add_driver(&tps51632_i2c_driver);
+}
+subsys_initcall(tps51632_init);
+
+static void __exit tps51632_cleanup(void)
+{
+	i2c_del_driver(&tps51632_i2c_driver);
+}
+module_exit(tps51632_cleanup);
+
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_DESCRIPTION("TPS51632 voltage regulator driver");
+MODULE_LICENSE("GPL v2");

drivers/regulator/tps6105x-regulator.c

@@ -127,7 +127,7 @@ static const struct regulator_desc tps6105x_regulator_desc = {
 /*
  * Registers the chip as a voltage regulator
  */
-static int __devinit tps6105x_regulator_probe(struct platform_device *pdev)
+static int tps6105x_regulator_probe(struct platform_device *pdev)
 {
 	struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev);
 	struct tps6105x_platform_data *pdata = tps6105x->pdata;
@@ -159,7 +159,7 @@ static int __devinit tps6105x_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit tps6105x_regulator_remove(struct platform_device *pdev)
+static int tps6105x_regulator_remove(struct platform_device *pdev)
 {
 	struct tps6105x *tps6105x = dev_get_platdata(&pdev->dev);
 	regulator_unregister(tps6105x->regulator);
@@ -172,7 +172,7 @@ static struct platform_driver tps6105x_regulator_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = tps6105x_regulator_probe,
-	.remove = __devexit_p(tps6105x_regulator_remove),
+	.remove = tps6105x_regulator_remove,
 };
 
 static __init int tps6105x_regulator_init(void)

drivers/regulator/tps62360-regulator.c

@@ -243,7 +243,7 @@ static struct regulator_ops tps62360_dcdc_ops = {
 	.get_mode		= tps62360_get_mode,
 };
 
-static int __devinit tps62360_init_dcdc(struct tps62360_chip *tps,
+static int tps62360_init_dcdc(struct tps62360_chip *tps,
 		struct tps62360_regulator_platform_data *pdata)
 {
 	int ret;
@@ -339,7 +339,7 @@ static const struct of_device_id tps62360_of_match[] = {
 MODULE_DEVICE_TABLE(of, tps62360_of_match);
 #endif
 
-static int __devinit tps62360_probe(struct i2c_client *client,
+static int tps62360_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
 	struct regulator_config config = { };
@@ -490,7 +490,7 @@ static int __devinit tps62360_probe(struct i2c_client *client,
  *
  * Unregister TPS driver as an i2c client device driver
  */
-static int __devexit tps62360_remove(struct i2c_client *client)
+static int tps62360_remove(struct i2c_client *client)
 {
 	struct tps62360_chip *tps = i2c_get_clientdata(client);
 
@@ -531,7 +531,7 @@ static struct i2c_driver tps62360_i2c_driver = {
 		.of_match_table = of_match_ptr(tps62360_of_match),
 	},
 	.probe = tps62360_probe,
-	.remove = __devexit_p(tps62360_remove),
+	.remove = tps62360_remove,
 	.shutdown = tps62360_shutdown,
 	.id_table = tps62360_id,
 };

drivers/regulator/tps65023-regulator.c

@@ -219,7 +219,7 @@ static struct regmap_config tps65023_regmap_config = {
 	.val_bits = 8,
 };
 
-static int __devinit tps_65023_probe(struct i2c_client *client,
+static int tps_65023_probe(struct i2c_client *client,
 				     const struct i2c_device_id *id)
 {
 	const struct tps_driver_data *drv_data = (void *)id->driver_data;
@@ -319,7 +319,7 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
 	return error;
 }
 
-static int __devexit tps_65023_remove(struct i2c_client *client)
+static int tps_65023_remove(struct i2c_client *client)
 {
 	struct tps_pmic *tps = i2c_get_clientdata(client);
 	int i;
@@ -446,7 +446,7 @@ static struct i2c_driver tps_65023_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = tps_65023_probe,
-	.remove = __devexit_p(tps_65023_remove),
+	.remove = tps_65023_remove,
 	.id_table = tps_65023_id,
 };
 

drivers/regulator/tps6507x-regulator.c

@@ -356,7 +356,7 @@ static struct regulator_ops tps6507x_pmic_ops = {
 	.list_voltage = regulator_list_voltage_table,
 };
 
-static __devinit int tps6507x_pmic_probe(struct platform_device *pdev)
+static int tps6507x_pmic_probe(struct platform_device *pdev)
 {
 	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
 	struct tps_info *info = &tps6507x_pmic_regs[0];
@@ -439,7 +439,7 @@ fail:
 	return error;
 }
 
-static int __devexit tps6507x_pmic_remove(struct platform_device *pdev)
+static int tps6507x_pmic_remove(struct platform_device *pdev)
 {
 	struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
 	struct tps6507x_pmic *tps = tps6507x_dev->pmic;
@@ -456,7 +456,7 @@ static struct platform_driver tps6507x_pmic_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = tps6507x_pmic_probe,
-	.remove = __devexit_p(tps6507x_pmic_remove),
+	.remove = tps6507x_pmic_remove,
 };
 
 static int __init tps6507x_pmic_init(void)

drivers/regulator/tps65090-regulator.c

@@ -18,119 +18,240 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/mfd/tps65090.h>
-#include <linux/regulator/tps65090-regulator.h>
 
 struct tps65090_regulator {
-	int		id;
-	/* used by regulator core */
-	struct regulator_desc	desc;
-
-	/* Device */
 	struct device		*dev;
+	struct regulator_desc	*desc;
+	struct regulator_dev	*rdev;
+};
+
+static struct regulator_ops tps65090_ext_control_ops = {
+};
+
+static struct regulator_ops tps65090_reg_contol_ops = {
+	.enable		= regulator_enable_regmap,
+	.disable	= regulator_disable_regmap,
+	.is_enabled	= regulator_is_enabled_regmap,
 };
 
-static struct regulator_ops tps65090_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
+static struct regulator_ops tps65090_ldo_ops = {
 };
 
-#define tps65090_REG(_id)				\
+#define tps65090_REG_DESC(_id, _sname, _en_reg, _ops)	\
 {							\
-	.id		= TPS65090_ID_##_id,		\
-	.desc = {					\
-		.name = tps65090_rails(_id),		\
-		.id = TPS65090_ID_##_id,		\
-		.ops = &tps65090_ops,			\
-		.type = REGULATOR_VOLTAGE,		\
-		.owner = THIS_MODULE,			\
-		.enable_reg = (TPS65090_ID_##_id) + 12,	\
-		.enable_mask = BIT(0),			\
-	},						\
+	.name = "TPS65090_RAILS"#_id,			\
+	.supply_name = _sname,				\
+	.id = TPS65090_REGULATOR_##_id,			\
+	.ops = &_ops,					\
+	.enable_reg = _en_reg,				\
+	.enable_mask = BIT(0),				\
+	.type = REGULATOR_VOLTAGE,			\
+	.owner = THIS_MODULE,				\
 }
 
-static struct tps65090_regulator TPS65090_regulator[] = {
-	tps65090_REG(DCDC1),
-	tps65090_REG(DCDC2),
-	tps65090_REG(DCDC3),
-	tps65090_REG(FET1),
-	tps65090_REG(FET2),
-	tps65090_REG(FET3),
-	tps65090_REG(FET4),
-	tps65090_REG(FET5),
-	tps65090_REG(FET6),
-	tps65090_REG(FET7),
+static struct regulator_desc tps65090_regulator_desc[] = {
+	tps65090_REG_DESC(DCDC1, "vsys1",   0x0C, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(DCDC2, "vsys2",   0x0D, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(DCDC3, "vsys3",   0x0E, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET1,  "infet1",  0x0F, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET2,  "infet2",  0x10, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET3,  "infet3",  0x11, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET4,  "infet4",  0x12, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET5,  "infet5",  0x13, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET6,  "infet6",  0x14, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(FET7,  "infet7",  0x15, tps65090_reg_contol_ops),
+	tps65090_REG_DESC(LDO1,  "vsys_l1", 0,    tps65090_ldo_ops),
+	tps65090_REG_DESC(LDO2,  "vsys_l2", 0,    tps65090_ldo_ops),
 };
 
-static inline struct tps65090_regulator *find_regulator_info(int id)
+static inline bool is_dcdc(int id)
 {
-	struct tps65090_regulator *ri;
-	int i;
+	switch (id) {
+	case TPS65090_REGULATOR_DCDC1:
+	case TPS65090_REGULATOR_DCDC2:
+	case TPS65090_REGULATOR_DCDC3:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int tps65090_config_ext_control(
+	struct tps65090_regulator *ri, bool enable)
+{
+	int ret;
+	struct device *parent = ri->dev->parent;
+	unsigned int reg_en_reg = ri->desc->enable_reg;
+
+	if (enable)
+		ret = tps65090_set_bits(parent, reg_en_reg, 1);
+	else
+		ret =  tps65090_clr_bits(parent, reg_en_reg, 1);
+	if (ret < 0)
+		dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
+	return ret;
+}
+
+static int tps65090_regulator_disable_ext_control(
+		struct tps65090_regulator *ri,
+		struct tps65090_regulator_plat_data *tps_pdata)
+{
+	int ret = 0;
+	struct device *parent = ri->dev->parent;
+	unsigned int reg_en_reg = ri->desc->enable_reg;
+
+	/*
+	 * First enable output for internal control if require.
+	 * And then disable external control.
+	 */
+	if (tps_pdata->reg_init_data->constraints.always_on ||
+			tps_pdata->reg_init_data->constraints.boot_on) {
+		ret =  tps65090_set_bits(parent, reg_en_reg, 0);
+		if (ret < 0) {
+			dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg);
+			return ret;
+		}
+	}
+	return tps65090_config_ext_control(ri, false);
+}
+
+static void tps65090_configure_regulator_config(
+		struct tps65090_regulator_plat_data *tps_pdata,
+		struct regulator_config *config)
+{
+	if (gpio_is_valid(tps_pdata->gpio)) {
+		int gpio_flag = GPIOF_OUT_INIT_LOW;
+
+		if (tps_pdata->reg_init_data->constraints.always_on ||
+				tps_pdata->reg_init_data->constraints.boot_on)
+			gpio_flag = GPIOF_OUT_INIT_HIGH;
 
-	for (i = 0; i < ARRAY_SIZE(TPS65090_regulator); i++) {
-		ri = &TPS65090_regulator[i];
-		if (ri->desc.id == id)
-			return ri;
+		config->ena_gpio = tps_pdata->gpio;
+		config->ena_gpio_flags = gpio_flag;
 	}
-	return NULL;
 }
 
-static int __devinit tps65090_regulator_probe(struct platform_device *pdev)
+static int tps65090_regulator_probe(struct platform_device *pdev)
 {
 	struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
 	struct tps65090_regulator *ri = NULL;
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
-	struct tps65090_regulator_platform_data *tps_pdata;
-	int id = pdev->id;
+	struct tps65090_regulator_plat_data *tps_pdata;
+	struct tps65090_regulator *pmic;
+	struct tps65090_platform_data *tps65090_pdata;
+	int num;
+	int ret;
 
-	dev_dbg(&pdev->dev, "Probing regulator %d\n", id);
+	dev_dbg(&pdev->dev, "Probing regulator\n");
 
-	ri = find_regulator_info(id);
-	if (ri == NULL) {
-		dev_err(&pdev->dev, "invalid regulator ID specified\n");
+	tps65090_pdata = dev_get_platdata(pdev->dev.parent);
+	if (!tps65090_pdata) {
+		dev_err(&pdev->dev, "Platform data missing\n");
 		return -EINVAL;
 	}
-	tps_pdata = pdev->dev.platform_data;
-	ri->dev = &pdev->dev;
-
-	config.dev = &pdev->dev;
-	config.init_data = &tps_pdata->regulator;
-	config.driver_data = ri;
-	config.regmap = tps65090_mfd->rmap;
-
-	rdev = regulator_register(&ri->desc, &config);
-	if (IS_ERR(rdev)) {
-		dev_err(&pdev->dev, "failed to register regulator %s\n",
-				ri->desc.name);
-		return PTR_ERR(rdev);
+
+	pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic),
+			GFP_KERNEL);
+	if (!pmic) {
+		dev_err(&pdev->dev, "mem alloc for pmic failed\n");
+		return -ENOMEM;
+	}
+
+	for (num = 0; num < TPS65090_REGULATOR_MAX; num++) {
+		tps_pdata = tps65090_pdata->reg_pdata[num];
+
+		ri = &pmic[num];
+		ri->dev = &pdev->dev;
+		ri->desc = &tps65090_regulator_desc[num];
+
+		/*
+		 * TPS5090 DCDC support the control from external digital input.
+		 * Configure it as per platform data.
+		 */
+		if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
+			if (tps_pdata->enable_ext_control) {
+				tps65090_configure_regulator_config(
+						tps_pdata, &config);
+				ri->desc->ops = &tps65090_ext_control_ops;
+			} else {
+				ret = tps65090_regulator_disable_ext_control(
+						ri, tps_pdata);
+				if (ret < 0) {
+					dev_err(&pdev->dev,
+						"failed disable ext control\n");
+					goto scrub;
+				}
+			}
+		}
+
+		config.dev = &pdev->dev;
+		config.driver_data = ri;
+		config.regmap = tps65090_mfd->rmap;
+		if (tps_pdata)
+			config.init_data = tps_pdata->reg_init_data;
+		else
+			config.init_data = NULL;
+
+		rdev = regulator_register(ri->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+				ri->desc->name);
+			ret = PTR_ERR(rdev);
+			goto scrub;
+		}
+		ri->rdev = rdev;
+
+		/* Enable external control if it is require */
+		if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
+				tps_pdata->enable_ext_control) {
+			ret = tps65090_config_ext_control(ri, true);
+			if (ret < 0) {
+				/* Increment num to get unregister rdev */
+				num++;
+				goto scrub;
+			}
+		}
 	}
 
-	platform_set_drvdata(pdev, rdev);
+	platform_set_drvdata(pdev, pmic);
 	return 0;
+
+scrub:
+	while (--num >= 0) {
+		ri = &pmic[num];
+		regulator_unregister(ri->rdev);
+	}
+	return ret;
 }
 
-static int __devexit tps65090_regulator_remove(struct platform_device *pdev)
+static int tps65090_regulator_remove(struct platform_device *pdev)
 {
-	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+	struct tps65090_regulator *pmic = platform_get_drvdata(pdev);
+	struct tps65090_regulator *ri;
+	int num;
 
-	regulator_unregister(rdev);
+	for (num = 0; num < TPS65090_REGULATOR_MAX; ++num) {
+		ri = &pmic[num];
+		regulator_unregister(ri->rdev);
+	}
 	return 0;
 }
 
 static struct platform_driver tps65090_regulator_driver = {
 	.driver	= {
-		.name	= "tps65090-regulator",
+		.name	= "tps65090-pmic",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= tps65090_regulator_probe,
-	.remove		= __devexit_p(tps65090_regulator_remove),
+	.remove		= tps65090_regulator_remove,
 };
 
 static int __init tps65090_regulator_init(void)
@@ -148,3 +269,4 @@ module_exit(tps65090_regulator_exit);
 MODULE_DESCRIPTION("tps65090 regulator driver");
 MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps65090-pmic");

drivers/regulator/tps65217-regulator.c

@@ -332,7 +332,7 @@ static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev)
 }
 #endif
 
-static int __devinit tps65217_regulator_probe(struct platform_device *pdev)
+static int tps65217_regulator_probe(struct platform_device *pdev)
 {
 	struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
 	struct tps65217_board *pdata = dev_get_platdata(tps->dev);
@@ -397,7 +397,7 @@ err_unregister_regulator:
 	return ret;
 }
 
-static int __devexit tps65217_regulator_remove(struct platform_device *pdev)
+static int tps65217_regulator_remove(struct platform_device *pdev)
 {
 	struct tps65217 *tps = platform_get_drvdata(pdev);
 	unsigned int i;
@@ -415,7 +415,7 @@ static struct platform_driver tps65217_regulator_driver = {
 		.name = "tps65217-pmic",
 	},
 	.probe = tps65217_regulator_probe,
-	.remove = __devexit_p(tps65217_regulator_remove),
+	.remove = tps65217_regulator_remove,
 };
 
 static int __init tps65217_regulator_init(void)

drivers/regulator/tps6524x-regulator.c

@@ -592,7 +592,7 @@ static int pmic_remove(struct spi_device *spi)
 	return 0;
 }
 
-static int __devinit pmic_probe(struct spi_device *spi)
+static int pmic_probe(struct spi_device *spi)
 {
 	struct tps6524x *hw;
 	struct device *dev = &spi->dev;
@@ -649,7 +649,7 @@ fail:
 
 static struct spi_driver pmic_driver = {
 	.probe		= pmic_probe,
-	.remove		= __devexit_p(pmic_remove),
+	.remove		= pmic_remove,
 	.driver		= {
 		.name	= "tps6524x",
 		.owner	= THIS_MODULE,

drivers/regulator/tps6586x-regulator.c

@@ -17,10 +17,12 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 #include <linux/mfd/tps6586x.h>
 
 /* supply control and voltage setting  */
@@ -255,10 +257,10 @@ static inline int tps6586x_regulator_preinit(struct device *parent,
 				 1 << ri->enable_bit[1]);
 }
 
-static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev)
+static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev,
+			int id, struct regulator_init_data *p)
 {
 	struct device *parent = pdev->dev.parent;
-	struct regulator_init_data *p = pdev->dev.platform_data;
 	struct tps6586x_settings *setting = p->driver_data;
 	uint8_t reg;
 
@@ -269,7 +271,7 @@ static int tps6586x_regulator_set_slew_rate(struct platform_device *pdev)
 		return 0;
 
 	/* only SM0 and SM1 can have the slew rate settings */
-	switch (pdev->id) {
+	switch (id) {
 	case TPS6586X_ID_SM_0:
 		reg = TPS6586X_SM0SL;
 		break;
@@ -298,58 +300,185 @@ static inline struct tps6586x_regulator *find_regulator_info(int id)
 	return NULL;
 }
 
-static int __devinit tps6586x_regulator_probe(struct platform_device *pdev)
+#ifdef CONFIG_OF
+static struct of_regulator_match tps6586x_matches[] = {
+	{ .name = "sys",     .driver_data = (void *)TPS6586X_ID_SYS     },
+	{ .name = "sm0",     .driver_data = (void *)TPS6586X_ID_SM_0    },
+	{ .name = "sm1",     .driver_data = (void *)TPS6586X_ID_SM_1    },
+	{ .name = "sm2",     .driver_data = (void *)TPS6586X_ID_SM_2    },
+	{ .name = "ldo0",    .driver_data = (void *)TPS6586X_ID_LDO_0   },
+	{ .name = "ldo1",    .driver_data = (void *)TPS6586X_ID_LDO_1   },
+	{ .name = "ldo2",    .driver_data = (void *)TPS6586X_ID_LDO_2   },
+	{ .name = "ldo3",    .driver_data = (void *)TPS6586X_ID_LDO_3   },
+	{ .name = "ldo4",    .driver_data = (void *)TPS6586X_ID_LDO_4   },
+	{ .name = "ldo5",    .driver_data = (void *)TPS6586X_ID_LDO_5   },
+	{ .name = "ldo6",    .driver_data = (void *)TPS6586X_ID_LDO_6   },
+	{ .name = "ldo7",    .driver_data = (void *)TPS6586X_ID_LDO_7   },
+	{ .name = "ldo8",    .driver_data = (void *)TPS6586X_ID_LDO_8   },
+	{ .name = "ldo9",    .driver_data = (void *)TPS6586X_ID_LDO_9   },
+	{ .name = "ldo_rtc", .driver_data = (void *)TPS6586X_ID_LDO_RTC },
+};
+
+static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(
+		struct platform_device *pdev,
+		struct of_regulator_match **tps6586x_reg_matches)
+{
+	const unsigned int num = ARRAY_SIZE(tps6586x_matches);
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct device_node *regs;
+	const char *sys_rail = NULL;
+	unsigned int i;
+	struct tps6586x_platform_data *pdata;
+	int err;
+
+	regs = of_find_node_by_name(np, "regulators");
+	if (!regs) {
+		dev_err(&pdev->dev, "regulator node not found\n");
+		return NULL;
+	}
+
+	err = of_regulator_match(&pdev->dev, regs, tps6586x_matches, num);
+	if (err < 0) {
+		dev_err(&pdev->dev, "Regulator match failed, e %d\n", err);
+		of_node_put(regs);
+		return NULL;
+	}
+
+	of_node_put(regs);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(&pdev->dev, "Memory alloction failed\n");
+		return NULL;
+	}
+
+	for (i = 0; i < num; i++) {
+		int id;
+		if (!tps6586x_matches[i].init_data)
+			continue;
+
+		pdata->reg_init_data[i] = tps6586x_matches[i].init_data;
+		id = (int)tps6586x_matches[i].driver_data;
+		if (id == TPS6586X_ID_SYS)
+			sys_rail = pdata->reg_init_data[i]->constraints.name;
+
+		if ((id == TPS6586X_ID_LDO_5) || (id == TPS6586X_ID_LDO_RTC))
+			pdata->reg_init_data[i]->supply_regulator = sys_rail;
+	}
+	*tps6586x_reg_matches = tps6586x_matches;
+	return pdata;
+}
+#else
+static struct tps6586x_platform_data *tps6586x_parse_regulator_dt(
+		struct platform_device *pdev,
+		struct of_regulator_match **tps6586x_reg_matches)
+{
+	*tps6586x_reg_matches = NULL;
+	return NULL;
+}
+#endif
+
+static int tps6586x_regulator_probe(struct platform_device *pdev)
 {
 	struct tps6586x_regulator *ri = NULL;
 	struct regulator_config config = { };
-	struct regulator_dev *rdev;
-	int id = pdev->id;
+	struct regulator_dev **rdev;
+	struct regulator_init_data *reg_data;
+	struct tps6586x_platform_data *pdata;
+	struct of_regulator_match *tps6586x_reg_matches = NULL;
+	int id;
 	int err;
 
-	dev_dbg(&pdev->dev, "Probing regulator %d\n", id);
+	dev_dbg(&pdev->dev, "Probing regulator\n");
 
-	ri = find_regulator_info(id);
-	if (ri == NULL) {
-		dev_err(&pdev->dev, "invalid regulator ID specified\n");
-		return -EINVAL;
-	}
+	pdata = dev_get_platdata(pdev->dev.parent);
+	if ((!pdata) && (pdev->dev.parent->of_node))
+		pdata = tps6586x_parse_regulator_dt(pdev,
+					&tps6586x_reg_matches);
 
-	err = tps6586x_regulator_preinit(pdev->dev.parent, ri);
-	if (err)
-		return err;
+	if (!pdata) {
+		dev_err(&pdev->dev, "Platform data not available, exiting\n");
+		return -ENODEV;
+	}
 
-	config.dev = pdev->dev.parent;
-	config.of_node = pdev->dev.of_node;
-	config.init_data = pdev->dev.platform_data;
-	config.driver_data = ri;
+	rdev = devm_kzalloc(&pdev->dev, TPS6586X_ID_MAX_REGULATOR *
+				sizeof(*rdev), GFP_KERNEL);
+	if (!rdev) {
+		dev_err(&pdev->dev, "Mmemory alloc failed\n");
+		return -ENOMEM;
+	}
 
-	rdev = regulator_register(&ri->desc, &config);
-	if (IS_ERR(rdev)) {
-		dev_err(&pdev->dev, "failed to register regulator %s\n",
-				ri->desc.name);
-		return PTR_ERR(rdev);
+	for (id = 0; id < TPS6586X_ID_MAX_REGULATOR; ++id) {
+		reg_data = pdata->reg_init_data[id];
+
+		ri = find_regulator_info(id);
+		if (!ri) {
+			dev_err(&pdev->dev, "invalid regulator ID specified\n");
+			err = -EINVAL;
+			goto fail;
+		}
+
+		err = tps6586x_regulator_preinit(pdev->dev.parent, ri);
+		if (err) {
+			dev_err(&pdev->dev,
+				"regulator %d preinit failed, e %d\n", id, err);
+			goto fail;
+		}
+
+		config.dev = pdev->dev.parent;
+		config.init_data = reg_data;
+		config.driver_data = ri;
+
+		if (tps6586x_reg_matches)
+			config.of_node = tps6586x_reg_matches[id].of_node;
+
+		rdev[id] = regulator_register(&ri->desc, &config);
+		if (IS_ERR(rdev[id])) {
+			dev_err(&pdev->dev, "failed to register regulator %s\n",
+					ri->desc.name);
+			err = PTR_ERR(rdev[id]);
+			goto fail;
+		}
+
+		if (reg_data) {
+			err = tps6586x_regulator_set_slew_rate(pdev, id,
+					reg_data);
+			if (err < 0) {
+				dev_err(&pdev->dev,
+					"Slew rate config failed, e %d\n", err);
+				regulator_unregister(rdev[id]);
+				goto fail;
+			}
+		}
 	}
 
 	platform_set_drvdata(pdev, rdev);
+	return 0;
 
-	return tps6586x_regulator_set_slew_rate(pdev);
+fail:
+	while (--id >= 0)
+		regulator_unregister(rdev[id]);
+	return err;
 }
 
-static int __devexit tps6586x_regulator_remove(struct platform_device *pdev)
+static int tps6586x_regulator_remove(struct platform_device *pdev)
 {
-	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+	struct regulator_dev **rdev = platform_get_drvdata(pdev);
+	int id = TPS6586X_ID_MAX_REGULATOR;
+
+	while (--id >= 0)
+		regulator_unregister(rdev[id]);
 
-	regulator_unregister(rdev);
 	return 0;
 }
 
 static struct platform_driver tps6586x_regulator_driver = {
 	.driver	= {
-		.name	= "tps6586x-regulator",
+		.name	= "tps6586x-pmic",
 		.owner	= THIS_MODULE,
 	},
 	.probe		= tps6586x_regulator_probe,
-	.remove		= __devexit_p(tps6586x_regulator_remove),
+	.remove		= tps6586x_regulator_remove,
 };
 
 static int __init tps6586x_regulator_init(void)

drivers/regulator/tps65910-regulator.c

@@ -38,6 +38,11 @@ static const unsigned int VIO_VSEL_table[] = {
 
 /* VSEL tables for TPS65910 specific LDOs and dcdc's */
 
+/* supported VRTC voltages in microvolts */
+static const unsigned int VRTC_VSEL_table[] = {
+	1800000,
+};
+
 /* supported VDD3 voltages in microvolts */
 static const unsigned int VDD3_VSEL_table[] = {
 	5000000,
@@ -95,6 +100,8 @@ static struct tps_info tps65910_regs[] = {
 	{
 		.name = "vrtc",
 		.vin_name = "vcc7",
+		.n_voltages = ARRAY_SIZE(VRTC_VSEL_table),
+		.voltage_table = VRTC_VSEL_table,
 		.enable_time_us = 2200,
 	},
 	{
@@ -1026,7 +1033,7 @@ static inline struct tps65910_board *tps65910_parse_dt_reg_data(
 }
 #endif
 
-static __devinit int tps65910_probe(struct platform_device *pdev)
+static int tps65910_probe(struct platform_device *pdev)
 {
 	struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
@@ -1184,7 +1191,7 @@ err_unregister_regulator:
 	return err;
 }
 
-static int __devexit tps65910_remove(struct platform_device *pdev)
+static int tps65910_remove(struct platform_device *pdev)
 {
 	struct tps65910_reg *pmic = platform_get_drvdata(pdev);
 	int i;
@@ -1231,7 +1238,7 @@ static struct platform_driver tps65910_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = tps65910_probe,
-	.remove = __devexit_p(tps65910_remove),
+	.remove = tps65910_remove,
 	.shutdown = tps65910_shutdown,
 };
 

drivers/regulator/tps65912-regulator.c

@@ -459,7 +459,7 @@ static struct regulator_ops tps65912_ops_ldo = {
 	.list_voltage = tps65912_list_voltage,
 };
 
-static __devinit int tps65912_probe(struct platform_device *pdev)
+static int tps65912_probe(struct platform_device *pdev)
 {
 	struct tps65912 *tps65912 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
@@ -525,7 +525,7 @@ err:
 	return err;
 }
 
-static int __devexit tps65912_remove(struct platform_device *pdev)
+static int tps65912_remove(struct platform_device *pdev)
 {
 	struct tps65912_reg *tps65912_reg = platform_get_drvdata(pdev);
 	int i;
@@ -541,7 +541,7 @@ static struct platform_driver tps65912_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe = tps65912_probe,
-	.remove = __devexit_p(tps65912_remove),
+	.remove = tps65912_remove,
 };
 
 static int __init tps65912_init(void)

drivers/regulator/tps80031-regulator.c

@@ -0,0 +1,788 @@
+/*
+ * tps80031-regulator.c -- TI TPS80031 regulator driver.
+ *
+ * Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power
+ * Management with Power Path and Battery Charger.
+ *
+ * Copyright (c) 2012, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ * 02111-1307, USA
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/tps80031.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/slab.h>
+
+/* Flags for DCDC Voltage reading */
+#define DCDC_OFFSET_EN		BIT(0)
+#define DCDC_EXTENDED_EN	BIT(1)
+#define TRACK_MODE_ENABLE	BIT(2)
+
+#define SMPS_MULTOFFSET_VIO	BIT(1)
+#define SMPS_MULTOFFSET_SMPS1	BIT(3)
+#define SMPS_MULTOFFSET_SMPS2	BIT(4)
+#define SMPS_MULTOFFSET_SMPS3	BIT(6)
+#define SMPS_MULTOFFSET_SMPS4	BIT(0)
+
+#define SMPS_CMD_MASK		0xC0
+#define SMPS_VSEL_MASK		0x3F
+#define LDO_VSEL_MASK		0x1F
+#define LDO_TRACK_VSEL_MASK	0x3F
+
+#define MISC2_LDOUSB_IN_VSYS	BIT(4)
+#define MISC2_LDOUSB_IN_PMID	BIT(3)
+#define MISC2_LDOUSB_IN_MASK	0x18
+
+#define MISC2_LDO3_SEL_VIB_VAL	BIT(0)
+#define MISC2_LDO3_SEL_VIB_MASK	0x1
+
+#define BOOST_HW_PWR_EN		BIT(5)
+#define BOOST_HW_PWR_EN_MASK	BIT(5)
+
+#define OPA_MODE_EN		BIT(6)
+#define OPA_MODE_EN_MASK	BIT(6)
+
+#define USB_VBUS_CTRL_SET	0x04
+#define USB_VBUS_CTRL_CLR	0x05
+#define VBUS_DISCHRG		0x20
+
+struct tps80031_regulator_info {
+	/* Regulator register address.*/
+	u8		trans_reg;
+	u8		state_reg;
+	u8		force_reg;
+	u8		volt_reg;
+	u8		volt_id;
+
+	/*Power request bits */
+	int		preq_bit;
+
+	/* used by regulator core */
+	struct regulator_desc	desc;
+
+};
+
+struct tps80031_regulator {
+	struct device			*dev;
+	struct regulator_dev		*rdev;
+	struct tps80031_regulator_info	*rinfo;
+
+	u8				device_flags;
+	unsigned int			config_flags;
+	unsigned int			ext_ctrl_flag;
+};
+
+static inline struct device *to_tps80031_dev(struct regulator_dev *rdev)
+{
+	return rdev_get_dev(rdev)->parent->parent;
+}
+
+static int tps80031_reg_is_enabled(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	u8 reg_val;
+	int ret;
+
+	if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
+		return true;
+
+	ret = tps80031_read(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
+				&reg_val);
+	if (ret < 0) {
+		dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n",
+			ri->rinfo->state_reg, ret);
+		return ret;
+	}
+	return ((reg_val & TPS80031_STATE_MASK) == TPS80031_STATE_ON);
+}
+
+static int tps80031_reg_enable(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret;
+
+	if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
+		return 0;
+
+	ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
+			TPS80031_STATE_ON, TPS80031_STATE_MASK);
+	if (ret < 0) {
+		dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
+			ri->rinfo->state_reg, ret);
+		return ret;
+	}
+	return ret;
+}
+
+static int tps80031_reg_disable(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret;
+
+	if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
+		return 0;
+
+	ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
+			TPS80031_STATE_OFF, TPS80031_STATE_MASK);
+	if (ret < 0)
+		dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
+			ri->rinfo->state_reg, ret);
+	return ret;
+}
+
+/* DCDC voltages for the selector of 58 to 63 */
+static int tps80031_dcdc_voltages[4][5] = {
+	{ 1350, 1500, 1800, 1900, 2100},
+	{ 1350, 1500, 1800, 1900, 2100},
+	{ 2084, 2315, 2778, 2932, 3241},
+	{ 4167, 2315, 2778, 2932, 3241},
+};
+
+static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	int volt_index = ri->device_flags & 0x3;
+
+	if (sel == 0)
+		return 0;
+	else if (sel < 58)
+		return regulator_list_voltage_linear(rdev, sel - 1);
+	else
+		return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000;
+}
+
+static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev,
+		unsigned vsel)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret;
+	u8 reg_val;
+
+	if (ri->rinfo->force_reg) {
+		ret = tps80031_read(parent, ri->rinfo->volt_id,
+						ri->rinfo->force_reg, &reg_val);
+		if (ret < 0) {
+			dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+				ri->rinfo->force_reg, ret);
+			return ret;
+		}
+		if (!(reg_val & SMPS_CMD_MASK)) {
+			ret = tps80031_update(parent, ri->rinfo->volt_id,
+				ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK);
+			if (ret < 0)
+				dev_err(ri->dev,
+					"reg 0x%02x update failed, e = %d\n",
+					ri->rinfo->force_reg, ret);
+			return ret;
+		}
+	}
+	ret = tps80031_update(parent, ri->rinfo->volt_id,
+			ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK);
+	if (ret < 0)
+		dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n",
+			ri->rinfo->volt_reg, ret);
+	return ret;
+}
+
+static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	uint8_t vsel = 0;
+	int ret;
+
+	if (ri->rinfo->force_reg) {
+		ret = tps80031_read(parent, ri->rinfo->volt_id,
+						ri->rinfo->force_reg, &vsel);
+		if (ret < 0) {
+			dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+					ri->rinfo->force_reg, ret);
+			return ret;
+		}
+
+		if (!(vsel & SMPS_CMD_MASK))
+			return vsel & SMPS_VSEL_MASK;
+	}
+	ret = tps80031_read(parent, ri->rinfo->volt_id,
+				ri->rinfo->volt_reg, &vsel);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+			ri->rinfo->volt_reg, ret);
+		return ret;
+	}
+	return vsel & SMPS_VSEL_MASK;
+}
+
+static int tps80031_ldo_set_voltage_sel(struct regulator_dev *rdev,
+		unsigned sel)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret;
+
+	/* Check for valid setting for TPS80031 or TPS80032-ES1.0 */
+	if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) &&
+			(ri->device_flags & TRACK_MODE_ENABLE)) {
+		unsigned nvsel = (sel) & 0x1F;
+		if (((tps80031_get_chip_info(parent) == TPS80031) ||
+			((tps80031_get_chip_info(parent) == TPS80032) &&
+			(tps80031_get_pmu_version(parent) == 0x0))) &&
+			((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) {
+				dev_err(ri->dev,
+					"Invalid sel %d in track mode LDO2\n",
+					nvsel);
+				return -EINVAL;
+		}
+	}
+
+	ret = tps80031_write(parent, ri->rinfo->volt_id,
+			ri->rinfo->volt_reg, sel);
+	if (ret < 0)
+		dev_err(ri->dev, "Error in writing reg 0x%02x, e = %d\n",
+			ri->rinfo->volt_reg, ret);
+	return ret;
+}
+
+static int tps80031_ldo_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	uint8_t vsel;
+	int ret;
+
+	ret = tps80031_read(parent, ri->rinfo->volt_id,
+				ri->rinfo->volt_reg, &vsel);
+	if (ret < 0) {
+		dev_err(ri->dev, "Error in writing the Voltage register\n");
+		return ret;
+	}
+	return vsel & rdev->desc->vsel_mask;
+}
+
+static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret = -EIO;
+	uint8_t ctrl1 = 0;
+	uint8_t ctrl3 = 0;
+
+	ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
+			TPS80031_CHARGERUSB_CTRL1, &ctrl1);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+			TPS80031_CHARGERUSB_CTRL1, ret);
+		return ret;
+	}
+	ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
+				TPS80031_CHARGERUSB_CTRL3, &ctrl3);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+			TPS80031_CHARGERUSB_CTRL3, ret);
+		return ret;
+	}
+	if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN))
+		return 1;
+	return ret;
+}
+
+static int tps80031_vbus_enable(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret;
+
+	ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
+				TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+					TPS80031_CHARGERUSB_CTRL1, ret);
+		return ret;
+	}
+
+	ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
+				TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
+			TPS80031_CHARGERUSB_CTRL3, ret);
+		return ret;
+	}
+	return ret;
+}
+
+static int tps80031_vbus_disable(struct regulator_dev *rdev)
+{
+	struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps80031_dev(rdev);
+	int ret = 0;
+
+	if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
+		ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
+			USB_VBUS_CTRL_SET, VBUS_DISCHRG);
+		if (ret < 0) {
+			dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
+				USB_VBUS_CTRL_SET, ret);
+			return ret;
+		}
+	}
+
+	ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
+			TPS80031_CHARGERUSB_CTRL1,  OPA_MODE_EN);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
+				TPS80031_CHARGERUSB_CTRL1, ret);
+		return ret;
+	}
+
+	ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
+				TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
+	if (ret < 0) {
+		dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
+				TPS80031_CHARGERUSB_CTRL3, ret);
+		return ret;
+	}
+
+	mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000));
+	if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
+		ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
+			USB_VBUS_CTRL_CLR, VBUS_DISCHRG);
+		if (ret < 0) {
+			dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
+					USB_VBUS_CTRL_CLR, ret);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+static struct regulator_ops tps80031_dcdc_ops = {
+	.list_voltage		= tps80031_dcdc_list_voltage,
+	.set_voltage_sel	= tps80031_dcdc_set_voltage_sel,
+	.get_voltage_sel	= tps80031_dcdc_get_voltage_sel,
+	.enable		= tps80031_reg_enable,
+	.disable	= tps80031_reg_disable,
+	.is_enabled	= tps80031_reg_is_enabled,
+};
+
+static struct regulator_ops tps80031_ldo_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.set_voltage_sel	= tps80031_ldo_set_voltage_sel,
+	.get_voltage_sel	= tps80031_ldo_get_voltage_sel,
+	.enable			= tps80031_reg_enable,
+	.disable		= tps80031_reg_disable,
+	.is_enabled		= tps80031_reg_is_enabled,
+};
+
+static struct regulator_ops tps80031_vbus_sw_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
+	.enable		= tps80031_vbus_enable,
+	.disable	= tps80031_vbus_disable,
+	.is_enabled	= tps80031_vbus_is_enabled,
+};
+
+static struct regulator_ops tps80031_vbus_hw_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
+};
+
+static struct regulator_ops tps80031_ext_reg_ops = {
+	.list_voltage	= regulator_list_voltage_linear,
+	.enable		= tps80031_reg_enable,
+	.disable	= tps80031_reg_disable,
+	.is_enabled	= tps80031_reg_is_enabled,
+};
+
+/* Non-exiting default definition for some register */
+#define TPS80031_SMPS3_CFG_FORCE	0
+#define TPS80031_SMPS4_CFG_FORCE	0
+
+#define TPS80031_VBUS_CFG_TRANS		0
+#define TPS80031_VBUS_CFG_STATE		0
+
+#define TPS80031_REG_SMPS(_id, _volt_id, _pbit)	\
+{								\
+	.trans_reg = TPS80031_##_id##_CFG_TRANS,		\
+	.state_reg = TPS80031_##_id##_CFG_STATE,		\
+	.force_reg = TPS80031_##_id##_CFG_FORCE,		\
+	.volt_reg = TPS80031_##_id##_CFG_VOLTAGE,		\
+	.volt_id = TPS80031_SLAVE_##_volt_id,			\
+	.preq_bit = _pbit,					\
+	.desc = {						\
+		.name = "tps80031_"#_id,			\
+		.id = TPS80031_REGULATOR_##_id,			\
+		.n_voltages = 63,				\
+		.ops = &tps80031_dcdc_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.owner = THIS_MODULE,				\
+		.enable_time = 500,				\
+	},							\
+}
+
+#define TPS80031_REG_LDO(_id, _preq_bit)			\
+{								\
+	.trans_reg = TPS80031_##_id##_CFG_TRANS,		\
+	.state_reg = TPS80031_##_id##_CFG_STATE,		\
+	.volt_reg = TPS80031_##_id##_CFG_VOLTAGE,		\
+	.volt_id = TPS80031_SLAVE_ID1,				\
+	.preq_bit = _preq_bit,					\
+	.desc = {						\
+		.owner = THIS_MODULE,				\
+		.name = "tps80031_"#_id,			\
+		.id = TPS80031_REGULATOR_##_id,			\
+		.ops = &tps80031_ldo_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.min_uV = 1000000,				\
+		.uV_step = 100000,				\
+		.linear_min_sel = 1,				\
+		.n_voltages = 25,				\
+		.vsel_mask = LDO_VSEL_MASK,			\
+		.enable_time = 500,				\
+	},							\
+}
+
+#define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit)	\
+{								\
+	.trans_reg = TPS80031_##_id##_CFG_TRANS,		\
+	.state_reg = TPS80031_##_id##_CFG_STATE,		\
+	.volt_id = TPS80031_SLAVE_ID1,				\
+	.preq_bit = _pbit,					\
+	.desc = {						\
+		.name = "tps80031_"#_id,			\
+		.id = TPS80031_REGULATOR_##_id,			\
+		.min_uV = max_mV * 1000,			\
+		.n_voltages = 1,				\
+		.ops = &_ops,					\
+		.type = REGULATOR_VOLTAGE,			\
+		.owner = THIS_MODULE,				\
+		.enable_time = _delay,				\
+	},							\
+}
+
+static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = {
+	TPS80031_REG_SMPS(VIO,   ID0, 4),
+	TPS80031_REG_SMPS(SMPS1, ID0, 0),
+	TPS80031_REG_SMPS(SMPS2, ID0, 1),
+	TPS80031_REG_SMPS(SMPS3, ID1, 2),
+	TPS80031_REG_SMPS(SMPS4, ID1, 3),
+	TPS80031_REG_LDO(VANA,   -1),
+	TPS80031_REG_LDO(LDO1,   8),
+	TPS80031_REG_LDO(LDO2,   9),
+	TPS80031_REG_LDO(LDO3,   10),
+	TPS80031_REG_LDO(LDO4,   11),
+	TPS80031_REG_LDO(LDO5,   12),
+	TPS80031_REG_LDO(LDO6,   13),
+	TPS80031_REG_LDO(LDO7,   14),
+	TPS80031_REG_LDO(LDOLN,  15),
+	TPS80031_REG_LDO(LDOUSB, 5),
+	TPS80031_REG_FIXED(VBUS,   5000, tps80031_vbus_hw_ops, 100000, -1),
+	TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16),
+	TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17),
+	TPS80031_REG_FIXED(SYSEN,  3300, tps80031_ext_reg_ops, 0, 18),
+};
+
+static int tps80031_power_req_config(struct device *parent,
+		struct tps80031_regulator *ri,
+		struct tps80031_regulator_platform_data *tps80031_pdata)
+{
+	int ret = 0;
+
+	if (ri->rinfo->preq_bit < 0)
+		goto skip_pwr_req_config;
+
+	ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag,
+			ri->rinfo->preq_bit, ri->rinfo->state_reg,
+			ri->rinfo->trans_reg);
+	if (ret < 0) {
+		dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret);
+		return ret;
+	}
+
+skip_pwr_req_config:
+	if (tps80031_pdata->ext_ctrl_flag & TPS80031_PWR_ON_ON_SLEEP) {
+		ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
+				ri->rinfo->trans_reg, TPS80031_TRANS_SLEEP_ON,
+				TPS80031_TRANS_SLEEP_MASK);
+		if (ret < 0) {
+			dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n",
+					ri->rinfo->trans_reg, ret);
+			return ret;
+		}
+	}
+	return ret;
+}
+
+static int tps80031_regulator_config(struct device *parent,
+		struct tps80031_regulator *ri,
+		struct tps80031_regulator_platform_data *tps80031_pdata)
+{
+	int ret = 0;
+
+	switch (ri->rinfo->desc.id) {
+	case TPS80031_REGULATOR_LDOUSB:
+		if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS |
+			TPS80031_USBLDO_INPUT_PMID)) {
+			unsigned val = 0;
+			if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS)
+				val = MISC2_LDOUSB_IN_VSYS;
+			else
+				val = MISC2_LDOUSB_IN_PMID;
+
+			ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
+				TPS80031_MISC2, val,
+				MISC2_LDOUSB_IN_MASK);
+			if (ret < 0) {
+				dev_err(ri->dev,
+					"LDOUSB config failed, e= %d\n", ret);
+				return ret;
+			}
+		}
+		break;
+
+	case TPS80031_REGULATOR_LDO3:
+		if (ri->config_flags & TPS80031_LDO3_OUTPUT_VIB) {
+			ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
+				TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL,
+				MISC2_LDO3_SEL_VIB_MASK);
+			if (ret < 0) {
+				dev_err(ri->dev,
+					"LDO3 config failed, e = %d\n", ret);
+				return ret;
+			}
+		}
+		break;
+
+	case TPS80031_REGULATOR_VBUS:
+		/* Provide SW control Ops if VBUS is SW control */
+		if (!(ri->config_flags & TPS80031_VBUS_SW_ONLY))
+			ri->rinfo->desc.ops = &tps80031_vbus_sw_ops;
+		break;
+	default:
+		break;
+	}
+
+	/* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */
+	ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->trans_reg,
+		TPS80031_TRANS_ACTIVE_ON | TPS80031_TRANS_SLEEP_OFF |
+		TPS80031_TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_MASK |
+		TPS80031_TRANS_SLEEP_MASK | TPS80031_TRANS_OFF_MASK);
+	if (ret < 0) {
+		dev_err(ri->dev, "trans reg update failed, e %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int check_smps_mode_mult(struct device *parent,
+	struct tps80031_regulator *ri)
+{
+	int mult_offset;
+	int ret;
+	u8 smps_offset;
+	u8 smps_mult;
+
+	ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
+			TPS80031_SMPS_OFFSET, &smps_offset);
+	if (ret < 0) {
+		dev_err(parent, "Error in reading smps offset register\n");
+		return ret;
+	}
+
+	ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
+			TPS80031_SMPS_MULT, &smps_mult);
+	if (ret < 0) {
+		dev_err(parent, "Error in reading smps mult register\n");
+		return ret;
+	}
+
+	switch (ri->rinfo->desc.id) {
+	case TPS80031_REGULATOR_VIO:
+		mult_offset = SMPS_MULTOFFSET_VIO;
+		break;
+	case TPS80031_REGULATOR_SMPS1:
+		mult_offset = SMPS_MULTOFFSET_SMPS1;
+		break;
+	case TPS80031_REGULATOR_SMPS2:
+		mult_offset = SMPS_MULTOFFSET_SMPS2;
+		break;
+	case TPS80031_REGULATOR_SMPS3:
+		mult_offset = SMPS_MULTOFFSET_SMPS3;
+		break;
+	case TPS80031_REGULATOR_SMPS4:
+		mult_offset = SMPS_MULTOFFSET_SMPS4;
+		break;
+	case TPS80031_REGULATOR_LDO2:
+		ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0;
+		/* TRACK mode the ldo2 varies from 600mV to 1300mV */
+		if (ri->device_flags & TRACK_MODE_ENABLE) {
+			ri->rinfo->desc.min_uV = 600000;
+			ri->rinfo->desc.uV_step = 12500;
+			ri->rinfo->desc.n_voltages = 57;
+			ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK;
+		}
+		return 0;
+	default:
+		return 0;
+	}
+
+	ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0;
+	ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0;
+	switch (ri->device_flags) {
+	case 0:
+		ri->rinfo->desc.min_uV = 607700;
+		ri->rinfo->desc.uV_step = 12660;
+		break;
+	case DCDC_OFFSET_EN:
+		ri->rinfo->desc.min_uV = 700000;
+		ri->rinfo->desc.uV_step = 12500;
+		break;
+	case DCDC_EXTENDED_EN:
+		ri->rinfo->desc.min_uV = 1852000;
+		ri->rinfo->desc.uV_step = 38600;
+		break;
+	case DCDC_OFFSET_EN | DCDC_EXTENDED_EN:
+		ri->rinfo->desc.min_uV = 2161000;
+		ri->rinfo->desc.uV_step = 38600;
+		break;
+	}
+	return 0;
+}
+
+static int tps80031_regulator_probe(struct platform_device *pdev)
+{
+	struct tps80031_platform_data *pdata;
+	struct tps80031_regulator_platform_data *tps_pdata;
+	struct tps80031_regulator *ri;
+	struct tps80031_regulator *pmic;
+	struct regulator_dev *rdev;
+	struct regulator_config config = { };
+	int ret;
+	int num;
+
+	pdata = dev_get_platdata(pdev->dev.parent);
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data\n");
+		return -EINVAL;
+	}
+
+	pmic = devm_kzalloc(&pdev->dev,
+			TPS80031_REGULATOR_MAX * sizeof(*pmic), GFP_KERNEL);
+	if (!pmic) {
+		dev_err(&pdev->dev, "mem alloc for pmic failed\n");
+		return -ENOMEM;
+	}
+
+	for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) {
+		tps_pdata = pdata->regulator_pdata[num];
+		ri = &pmic[num];
+		ri->rinfo = &tps80031_rinfo[num];
+		ri->dev = &pdev->dev;
+
+		check_smps_mode_mult(pdev->dev.parent, ri);
+		config.dev = &pdev->dev;
+		config.init_data = NULL;
+		config.driver_data = ri;
+		if (tps_pdata) {
+			config.init_data = tps_pdata->reg_init_data;
+			ri->config_flags = tps_pdata->config_flags;
+			ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag;
+			ret = tps80031_regulator_config(pdev->dev.parent,
+					ri, tps_pdata);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"regulator config failed, e %d\n", ret);
+				goto fail;
+			}
+
+			ret = tps80031_power_req_config(pdev->dev.parent,
+					ri, tps_pdata);
+			if (ret < 0) {
+				dev_err(&pdev->dev,
+					"pwr_req config failed, err %d\n", ret);
+				goto fail;
+			}
+		}
+		rdev = regulator_register(&ri->rinfo->desc, &config);
+		if (IS_ERR_OR_NULL(rdev)) {
+			dev_err(&pdev->dev,
+				"register regulator failed %s\n",
+					ri->rinfo->desc.name);
+			ret = PTR_ERR(rdev);
+			goto fail;
+		}
+		ri->rdev = rdev;
+	}
+
+	platform_set_drvdata(pdev, pmic);
+	return 0;
+fail:
+	while (--num >= 0) {
+		ri = &pmic[num];
+		regulator_unregister(ri->rdev);
+	}
+	return ret;
+}
+
+static int tps80031_regulator_remove(struct platform_device *pdev)
+{
+	struct tps80031_regulator *pmic = platform_get_drvdata(pdev);
+	struct tps80031_regulator *ri = NULL;
+	int num;
+
+	for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) {
+		ri = &pmic[num];
+		regulator_unregister(ri->rdev);
+	}
+	return 0;
+}
+
+static struct platform_driver tps80031_regulator_driver = {
+	.driver	= {
+		.name	= "tps80031-pmic",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= tps80031_regulator_probe,
+	.remove		= tps80031_regulator_remove,
+};
+
+static int __init tps80031_regulator_init(void)
+{
+	return platform_driver_register(&tps80031_regulator_driver);
+}
+subsys_initcall(tps80031_regulator_init);
+
+static void __exit tps80031_regulator_exit(void)
+{
+	platform_driver_unregister(&tps80031_regulator_driver);
+}
+module_exit(tps80031_regulator_exit);
+
+MODULE_ALIAS("platform:tps80031-regulator");
+MODULE_DESCRIPTION("Regulator Driver for TI TPS80031/TPS80032 PMIC");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");

drivers/regulator/twl-regulator.c

@@ -1116,7 +1116,7 @@ static const struct of_device_id twl_of_match[] __devinitconst = {
 };
 MODULE_DEVICE_TABLE(of, twl_of_match);
 
-static int __devinit twlreg_probe(struct platform_device *pdev)
+static int twlreg_probe(struct platform_device *pdev)
 {
 	int				i, id;
 	struct twlreg_info		*info;
@@ -1241,7 +1241,7 @@ static int __devinit twlreg_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit twlreg_remove(struct platform_device *pdev)
+static int twlreg_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 	struct twlreg_info *info = rdev->reg_data;
@@ -1255,7 +1255,7 @@ MODULE_ALIAS("platform:twl_reg");
 
 static struct platform_driver twlreg_driver = {
 	.probe		= twlreg_probe,
-	.remove		= __devexit_p(twlreg_remove),
+	.remove		= twlreg_remove,
 	/* NOTE: short name, to work around driver model truncation of
 	 * "twl_regulator.12" (and friends) to "twl_regulator.1".
 	 */

drivers/regulator/vexpress.c

@@ -0,0 +1,147 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#define DRVNAME "vexpress-regulator"
+#define pr_fmt(fmt) DRVNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/vexpress.h>
+
+struct vexpress_regulator {
+	struct regulator_desc desc;
+	struct regulator_dev *regdev;
+	struct vexpress_config_func *func;
+};
+
+static int vexpress_regulator_get_voltage(struct regulator_dev *regdev)
+{
+	struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
+	u32 uV;
+	int err = vexpress_config_read(reg->func, 0, &uV);
+
+	return err ? err : uV;
+}
+
+static int vexpress_regulator_set_voltage(struct regulator_dev *regdev,
+		int min_uV, int max_uV, unsigned *selector)
+{
+	struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
+
+	return vexpress_config_write(reg->func, 0, min_uV);
+}
+
+static struct regulator_ops vexpress_regulator_ops_ro = {
+	.get_voltage = vexpress_regulator_get_voltage,
+};
+
+static struct regulator_ops vexpress_regulator_ops = {
+	.get_voltage = vexpress_regulator_get_voltage,
+	.set_voltage = vexpress_regulator_set_voltage,
+};
+
+static int vexpress_regulator_probe(struct platform_device *pdev)
+{
+	int err;
+	struct vexpress_regulator *reg;
+	struct regulator_init_data *init_data;
+	struct regulator_config config = { };
+
+	reg = devm_kzalloc(&pdev->dev, sizeof(*reg), GFP_KERNEL);
+	if (!reg) {
+		err = -ENOMEM;
+		goto error_kzalloc;
+	}
+
+	reg->func = vexpress_config_func_get_by_dev(&pdev->dev);
+	if (!reg->func) {
+		err = -ENXIO;
+		goto error_get_func;
+	}
+
+	reg->desc.name = dev_name(&pdev->dev);
+	reg->desc.type = REGULATOR_VOLTAGE;
+	reg->desc.owner = THIS_MODULE;
+	reg->desc.continuous_voltage_range = true;
+
+	init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+	if (!init_data) {
+		err = -EINVAL;
+		goto error_get_regulator_init_data;
+	}
+
+	init_data->constraints.apply_uV = 0;
+	if (init_data->constraints.min_uV && init_data->constraints.max_uV)
+		reg->desc.ops = &vexpress_regulator_ops;
+	else
+		reg->desc.ops = &vexpress_regulator_ops_ro;
+
+	config.dev = &pdev->dev;
+	config.init_data = init_data;
+	config.driver_data = reg;
+	config.of_node = pdev->dev.of_node;
+
+	reg->regdev = regulator_register(&reg->desc, &config);
+	if (IS_ERR(reg->regdev)) {
+		err = PTR_ERR(reg->regdev);
+		goto error_regulator_register;
+	}
+
+	platform_set_drvdata(pdev, reg);
+
+	return 0;
+
+error_regulator_register:
+error_get_regulator_init_data:
+	vexpress_config_func_put(reg->func);
+error_get_func:
+error_kzalloc:
+	return err;
+}
+
+static int vexpress_regulator_remove(struct platform_device *pdev)
+{
+	struct vexpress_regulator *reg = platform_get_drvdata(pdev);
+
+	vexpress_config_func_put(reg->func);
+	regulator_unregister(reg->regdev);
+
+	return 0;
+}
+
+static struct of_device_id vexpress_regulator_of_match[] = {
+	{ .compatible = "arm,vexpress-volt", },
+	{ }
+};
+
+static struct platform_driver vexpress_regulator_driver = {
+	.probe = vexpress_regulator_probe,
+	.remove = vexpress_regulator_remove,
+	.driver	= {
+		.name = DRVNAME,
+		.owner = THIS_MODULE,
+		.of_match_table = vexpress_regulator_of_match,
+	},
+};
+
+module_platform_driver(vexpress_regulator_driver);
+
+MODULE_AUTHOR("Pawel Moll <pawel.moll@arm.com>");
+MODULE_DESCRIPTION("Versatile Express regulator");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:vexpress-regulator");

drivers/regulator/virtual.c

@@ -285,7 +285,7 @@ static const struct attribute_group regulator_virtual_attr_group = {
 	.attrs	= regulator_virtual_attributes,
 };
 
-static int __devinit regulator_virtual_probe(struct platform_device *pdev)
+static int regulator_virtual_probe(struct platform_device *pdev)
 {
 	char *reg_id = pdev->dev.platform_data;
 	struct virtual_consumer_data *drvdata;
@@ -321,7 +321,7 @@ static int __devinit regulator_virtual_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit regulator_virtual_remove(struct platform_device *pdev)
+static int regulator_virtual_remove(struct platform_device *pdev)
 {
 	struct virtual_consumer_data *drvdata = platform_get_drvdata(pdev);
 
@@ -337,7 +337,7 @@ static int __devexit regulator_virtual_remove(struct platform_device *pdev)
 
 static struct platform_driver regulator_virtual_consumer_driver = {
 	.probe		= regulator_virtual_probe,
-	.remove		= __devexit_p(regulator_virtual_remove),
+	.remove		= regulator_virtual_remove,
 	.driver		= {
 		.name		= "reg-virt-consumer",
 		.owner		= THIS_MODULE,

drivers/regulator/wm831x-dcdc.c

@@ -223,7 +223,7 @@ static int wm831x_buckv_map_voltage(struct regulator_dev *rdev,
 	if (min_uV < 600000)
 		vsel = 0;
 	else if (min_uV <= 1800000)
-		vsel = ((min_uV - 600000) / 12500) + 8;
+		vsel = DIV_ROUND_UP(min_uV - 600000, 12500) + 8;
 	else
 		return -EINVAL;
 
@@ -290,7 +290,7 @@ static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev,
 	if (vsel > dcdc->dvs_vsel) {
 		ret = wm831x_set_bits(wm831x, dvs_reg,
 				      WM831X_DC1_DVS_VSEL_MASK,
-				      dcdc->dvs_vsel);
+				      vsel);
 		if (ret == 0)
 			dcdc->dvs_vsel = vsel;
 		else
@@ -387,7 +387,7 @@ static struct regulator_ops wm831x_buckv_ops = {
  * Set up DVS control.  We just log errors since we can still run
  * (with reduced performance) if we fail.
  */
-static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
+static void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
 					    struct wm831x_buckv_pdata *pdata)
 {
 	struct wm831x *wm831x = dcdc->wm831x;
@@ -448,7 +448,7 @@ static __devinit void wm831x_buckv_dvs_init(struct wm831x_dcdc *dcdc,
 	}
 }
 
-static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
+static int wm831x_buckv_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -562,7 +562,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
+static int wm831x_buckv_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 	struct wm831x *wm831x = dcdc->wm831x;
@@ -582,7 +582,7 @@ static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_buckv_driver = {
 	.probe = wm831x_buckv_probe,
-	.remove = __devexit_p(wm831x_buckv_remove),
+	.remove = wm831x_buckv_remove,
 	.driver		= {
 		.name	= "wm831x-buckv",
 		.owner	= THIS_MODULE,
@@ -623,7 +623,7 @@ static struct regulator_ops wm831x_buckp_ops = {
 	.set_suspend_mode = wm831x_dcdc_set_suspend_mode,
 };
 
-static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
+static int wm831x_buckp_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -710,7 +710,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
+static int wm831x_buckp_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 
@@ -725,7 +725,7 @@ static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_buckp_driver = {
 	.probe = wm831x_buckp_probe,
-	.remove = __devexit_p(wm831x_buckp_remove),
+	.remove = wm831x_buckp_remove,
 	.driver		= {
 		.name	= "wm831x-buckp",
 		.owner	= THIS_MODULE,
@@ -771,7 +771,7 @@ static struct regulator_ops wm831x_boostp_ops = {
 	.disable = regulator_disable_regmap,
 };
 
-static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
+static int wm831x_boostp_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -845,7 +845,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
+static int wm831x_boostp_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 
@@ -860,7 +860,7 @@ static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_boostp_driver = {
 	.probe = wm831x_boostp_probe,
-	.remove = __devexit_p(wm831x_boostp_remove),
+	.remove = wm831x_boostp_remove,
 	.driver		= {
 		.name	= "wm831x-boostp",
 		.owner	= THIS_MODULE,
@@ -883,7 +883,7 @@ static struct regulator_ops wm831x_epe_ops = {
 	.get_status = wm831x_dcdc_get_status,
 };
 
-static __devinit int wm831x_epe_probe(struct platform_device *pdev)
+static int wm831x_epe_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -936,7 +936,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_epe_remove(struct platform_device *pdev)
+static int wm831x_epe_remove(struct platform_device *pdev)
 {
 	struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
 
@@ -948,7 +948,7 @@ static __devexit int wm831x_epe_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_epe_driver = {
 	.probe = wm831x_epe_probe,
-	.remove = __devexit_p(wm831x_epe_remove),
+	.remove = wm831x_epe_remove,
 	.driver		= {
 		.name	= "wm831x-epe",
 		.owner	= THIS_MODULE,
@@ -993,4 +993,5 @@ MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:wm831x-buckv");
 MODULE_ALIAS("platform:wm831x-buckp");
+MODULE_ALIAS("platform:wm831x-boostp");
 MODULE_ALIAS("platform:wm831x-epe");

drivers/regulator/wm831x-isink.c

@@ -148,7 +148,7 @@ static irqreturn_t wm831x_isink_irq(int irq, void *data)
 }
 
 
-static __devinit int wm831x_isink_probe(struct platform_device *pdev)
+static int wm831x_isink_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -221,7 +221,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_isink_remove(struct platform_device *pdev)
+static int wm831x_isink_remove(struct platform_device *pdev)
 {
 	struct wm831x_isink *isink = platform_get_drvdata(pdev);
 
@@ -236,7 +236,7 @@ static __devexit int wm831x_isink_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_isink_driver = {
 	.probe = wm831x_isink_probe,
-	.remove = __devexit_p(wm831x_isink_remove),
+	.remove = wm831x_isink_remove,
 	.driver		= {
 		.name	= "wm831x-isink",
 		.owner	= THIS_MODULE,

drivers/regulator/wm831x-ldo.c

@@ -247,7 +247,7 @@ static struct regulator_ops wm831x_gp_ldo_ops = {
 	.disable = regulator_disable_regmap,
 };
 
-static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
+static int wm831x_gp_ldo_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -334,7 +334,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
+static int wm831x_gp_ldo_remove(struct platform_device *pdev)
 {
 	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
 
@@ -349,7 +349,7 @@ static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_gp_ldo_driver = {
 	.probe = wm831x_gp_ldo_probe,
-	.remove = __devexit_p(wm831x_gp_ldo_remove),
+	.remove = wm831x_gp_ldo_remove,
 	.driver		= {
 		.name	= "wm831x-ldo",
 		.owner	= THIS_MODULE,
@@ -504,7 +504,7 @@ static struct regulator_ops wm831x_aldo_ops = {
 	.disable = regulator_disable_regmap,
 };
 
-static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
+static int wm831x_aldo_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -590,7 +590,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
+static int wm831x_aldo_remove(struct platform_device *pdev)
 {
 	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
 
@@ -603,7 +603,7 @@ static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_aldo_driver = {
 	.probe = wm831x_aldo_probe,
-	.remove = __devexit_p(wm831x_aldo_remove),
+	.remove = wm831x_aldo_remove,
 	.driver		= {
 		.name	= "wm831x-aldo",
 		.owner	= THIS_MODULE,
@@ -660,7 +660,7 @@ static struct regulator_ops wm831x_alive_ldo_ops = {
 	.disable = regulator_disable_regmap,
 };
 
-static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
+static int wm831x_alive_ldo_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
 	struct wm831x_pdata *pdata = wm831x->dev->platform_data;
@@ -737,7 +737,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
+static int wm831x_alive_ldo_remove(struct platform_device *pdev)
 {
 	struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
 
@@ -748,7 +748,7 @@ static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
 
 static struct platform_driver wm831x_alive_ldo_driver = {
 	.probe = wm831x_alive_ldo_probe,
-	.remove = __devexit_p(wm831x_alive_ldo_remove),
+	.remove = wm831x_alive_ldo_remove,
 	.driver		= {
 		.name	= "wm831x-alive-ldo",
 		.owner	= THIS_MODULE,

drivers/regulator/wm8400-regulator.c

@@ -226,7 +226,7 @@ static struct regulator_desc regulators[] = {
 	},
 };
 
-static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
+static int wm8400_regulator_probe(struct platform_device *pdev)
 {
 	struct wm8400 *wm8400 = container_of(pdev, struct wm8400, regulators[pdev->id]);
 	struct regulator_config config = { };
@@ -246,7 +246,7 @@ static int __devinit wm8400_regulator_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devexit wm8400_regulator_remove(struct platform_device *pdev)
+static int wm8400_regulator_remove(struct platform_device *pdev)
 {
 	struct regulator_dev *rdev = platform_get_drvdata(pdev);
 
@@ -261,7 +261,7 @@ static struct platform_driver wm8400_regulator_driver = {
 		.name = "wm8400-regulator",
 	},
 	.probe = wm8400_regulator_probe,
-	.remove = __devexit_p(wm8400_regulator_remove),
+	.remove = wm8400_regulator_remove,
 };
 
 /**

drivers/regulator/wm8994-regulator.c

@@ -99,7 +99,7 @@ static const struct regulator_desc wm8994_ldo_desc[] = {
 	},
 };
 
-static __devinit int wm8994_ldo_probe(struct platform_device *pdev)
+static int wm8994_ldo_probe(struct platform_device *pdev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(pdev->dev.parent);
 	struct wm8994_pdata *pdata = wm8994->dev->platform_data;
@@ -142,7 +142,7 @@ err:
 	return ret;
 }
 
-static __devexit int wm8994_ldo_remove(struct platform_device *pdev)
+static int wm8994_ldo_remove(struct platform_device *pdev)
 {
 	struct wm8994_ldo *ldo = platform_get_drvdata(pdev);
 
@@ -155,7 +155,7 @@ static __devexit int wm8994_ldo_remove(struct platform_device *pdev)
 
 static struct platform_driver wm8994_ldo_driver = {
 	.probe = wm8994_ldo_probe,
-	.remove = __devexit_p(wm8994_ldo_remove),
+	.remove = wm8994_ldo_remove,
 	.driver		= {
 		.name	= "wm8994-ldo",
 		.owner	= THIS_MODULE,

include/linux/mfd/arizona/registers.h

@@ -76,6 +76,7 @@
 #define ARIZONA_RATE_ESTIMATOR_3                 0x154
 #define ARIZONA_RATE_ESTIMATOR_4                 0x155
 #define ARIZONA_RATE_ESTIMATOR_5                 0x156
+#define ARIZONA_DYNAMIC_FREQUENCY_SCALING_1      0x161
 #define ARIZONA_FLL1_CONTROL_1                   0x171
 #define ARIZONA_FLL1_CONTROL_2                   0x172
 #define ARIZONA_FLL1_CONTROL_3                   0x173
@@ -110,6 +111,7 @@
 #define ARIZONA_FLL2_GPIO_CLOCK                  0x1AA
 #define ARIZONA_MIC_CHARGE_PUMP_1                0x200
 #define ARIZONA_LDO1_CONTROL_1                   0x210
+#define ARIZONA_LDO1_CONTROL_2                   0x212
 #define ARIZONA_LDO2_CONTROL_1                   0x213
 #define ARIZONA_MIC_BIAS_CTRL_1                  0x218
 #define ARIZONA_MIC_BIAS_CTRL_2                  0x219
@@ -1573,6 +1575,13 @@
 #define ARIZONA_SAMPLE_RATE_DETECT_D_SHIFT            0  /* SAMPLE_RATE_DETECT_D - [4:0] */
 #define ARIZONA_SAMPLE_RATE_DETECT_D_WIDTH            5  /* SAMPLE_RATE_DETECT_D - [4:0] */
 
+/*
+ * R353 (0x161) - Dynamic Frequency Scaling 1
+ */
+#define ARIZONA_SUBSYS_MAX_FREQ                  0x0001  /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_SHIFT                 0  /* SUBSYS_MAX_FREQ */
+#define ARIZONA_SUBSYS_MAX_FREQ_WIDTH                 1  /* SUBSYS_MAX_FREQ */
+
 /*
  * R369 (0x171) - FLL1 Control 1
  */
@@ -1888,6 +1897,13 @@
 #define ARIZONA_LDO1_ENA_SHIFT                        0  /* LDO1_ENA */
 #define ARIZONA_LDO1_ENA_WIDTH                        1  /* LDO1_ENA */
 
+/*
+ * R530 (0x212) - LDO1 Control 2
+ */
+#define ARIZONA_LDO1_HI_PWR                      0x0001  /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_SHIFT                     0  /* LDO1_HI_PWR */
+#define ARIZONA_LDO1_HI_PWR_WIDTH                     1  /* LDO1_HI_PWR */
+
 /*
  * R531 (0x213) - LDO2 Control 1
  */

include/linux/mfd/da9055/pdata.h

@@ -25,8 +25,29 @@ struct da9055_pdata {
 	int gpio_base;
 
 	struct regulator_init_data *regulators[DA9055_MAX_REGULATORS];
-	bool reset_enable;		/* Enable RTC in RESET Mode */
-	enum gpio_select *gpio_rsel;	/* Select regulator set thru GPIO 1/2 */
-	enum gpio_select *gpio_ren;	/* Enable regulator thru GPIO 1/2 */
+	/* Enable RTC in RESET Mode */
+	bool reset_enable;
+	/*
+	 * GPI muxed pin to control
+	 * regulator state A/B, 0 if not available.
+	 */
+	int *gpio_ren;
+	/*
+	 * GPI muxed pin to control
+	 * regulator set, 0 if not available.
+	 */
+	int *gpio_rsel;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * that controls the regulator state, 0 if not available.
+	 */
+	enum gpio_select *reg_ren;
+	/*
+	 * Regulator mode control bits value (GPI offset) that
+	 * controls the regulator set A/B, 0 if  not available.
+	 */
+	enum gpio_select *reg_rsel;
+	/* GPIOs to enable regulator, 0 if not available */
+	int *ena_gpio;
 };
 #endif /* __DA9055_PDATA_H */

include/linux/mfd/max8997-private.h

@@ -316,6 +316,7 @@ enum max8997_irq {
 #define MAX8997_NUM_GPIO	12
 struct max8997_dev {
 	struct device *dev;
+	struct max8997_platform_data *pdata;
 	struct i2c_client *i2c; /* 0xcc / PMIC, Battery Control, and FLASH */
 	struct i2c_client *rtc; /* slave addr 0x0c */
 	struct i2c_client *haptic; /* slave addr 0x90 */

include/linux/mfd/max8997.h

@@ -75,6 +75,7 @@ enum max8998_regulators {
 struct max8997_regulator_data {
 	int id;
 	struct regulator_init_data *initdata;
+	struct device_node *reg_node;
 };
 
 enum max8997_muic_usb_type {

include/linux/mfd/tps65090.h

@@ -24,6 +24,25 @@
 
 #include <linux/irq.h>
 
+/* TPS65090 Regulator ID */
+enum {
+	TPS65090_REGULATOR_DCDC1,
+	TPS65090_REGULATOR_DCDC2,
+	TPS65090_REGULATOR_DCDC3,
+	TPS65090_REGULATOR_FET1,
+	TPS65090_REGULATOR_FET2,
+	TPS65090_REGULATOR_FET3,
+	TPS65090_REGULATOR_FET4,
+	TPS65090_REGULATOR_FET5,
+	TPS65090_REGULATOR_FET6,
+	TPS65090_REGULATOR_FET7,
+	TPS65090_REGULATOR_LDO1,
+	TPS65090_REGULATOR_LDO2,
+
+	/* Last entry for maximum ID */
+	TPS65090_REGULATOR_MAX,
+};
+
 struct tps65090 {
 	struct mutex		lock;
 	struct device		*dev;
@@ -41,10 +60,26 @@ struct tps65090_subdev_info {
 	void		*platform_data;
 };
 
+/*
+ * struct tps65090_regulator_plat_data
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_ext_control: Enable extrenal control or not. Only available for
+ *     DCDC1, DCDC2 and DCDC3.
+ * @gpio: Gpio number if external control is enabled and controlled through
+ *     gpio.
+ */
+struct tps65090_regulator_plat_data {
+	struct regulator_init_data *reg_init_data;
+	bool enable_ext_control;
+	int gpio;
+};
+
 struct tps65090_platform_data {
 	int irq_base;
 	int num_subdevs;
 	struct tps65090_subdev_info *subdevs;
+	struct tps65090_regulator_plat_data *reg_pdata[TPS65090_REGULATOR_MAX];
 };
 
 /*

include/linux/mfd/tps6586x.h

@@ -29,6 +29,7 @@ enum {
 	TPS6586X_ID_LDO_8,
 	TPS6586X_ID_LDO_9,
 	TPS6586X_ID_LDO_RTC,
+	TPS6586X_ID_MAX_REGULATOR,
 };
 
 enum {
@@ -79,6 +80,8 @@ struct tps6586x_platform_data {
 	int gpio_base;
 	int irq_base;
 	bool pm_off;
+
+	struct regulator_init_data *reg_init_data[TPS6586X_ID_MAX_REGULATOR];
 };
 
 /*

include/linux/regulator/consumer.h

@@ -160,6 +160,7 @@ int regulator_bulk_force_disable(int num_consumers,
 void regulator_bulk_free(int num_consumers,
 			 struct regulator_bulk_data *consumers);
 
+int regulator_can_change_voltage(struct regulator *regulator);
 int regulator_count_voltages(struct regulator *regulator);
 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_is_supported_voltage(struct regulator *regulator,
@@ -358,6 +359,10 @@ static inline void regulator_set_drvdata(struct regulator *regulator,
 {
 }
 
+static inline int regulator_count_voltages(struct regulator *regulator)
+{
+	return 0;
+}
 #endif
 
 static inline int regulator_set_voltage_tol(struct regulator *regulator,
@@ -367,4 +372,12 @@ static inline int regulator_set_voltage_tol(struct regulator *regulator,
 				     new_uV - tol_uV, new_uV + tol_uV);
 }
 
+static inline int regulator_is_supported_voltage_tol(struct regulator *regulator,
+						     int target_uV, int tol_uV)
+{
+	return regulator_is_supported_voltage(regulator,
+					      target_uV - tol_uV,
+					      target_uV + tol_uV);
+}
+
 #endif

include/linux/regulator/driver.h

@@ -181,10 +181,13 @@ enum regulator_type {
  * @type: Indicates if the regulator is a voltage or current regulator.
  * @owner: Module providing the regulator, used for refcounting.
  *
+ * @continuous_voltage_range: Indicates if the regulator can set any
+ *                            voltage within constrains range.
  * @n_voltages: Number of selectors available for ops.list_voltage().
  *
  * @min_uV: Voltage given by the lowest selector (if linear mapping)
  * @uV_step: Voltage increase with each selector (if linear mapping)
+ * @linear_min_sel: Minimal selector for starting linear mapping
  * @ramp_delay: Time to settle down after voltage change (unit: uV/us)
  * @volt_table: Voltage mapping table (if table based mapping)
  *
@@ -199,6 +202,7 @@ struct regulator_desc {
 	const char *name;
 	const char *supply_name;
 	int id;
+	bool continuous_voltage_range;
 	unsigned n_voltages;
 	struct regulator_ops *ops;
 	int irq;
@@ -207,6 +211,7 @@ struct regulator_desc {
 
 	unsigned int min_uV;
 	unsigned int uV_step;
+	unsigned int linear_min_sel;
 	unsigned int ramp_delay;
 
 	const unsigned int *volt_table;

include/linux/regulator/max8973-regulator.h

@@ -0,0 +1,72 @@
+/*
+ * max8973-regulator.h -- MAXIM 8973 regulator
+ *
+ * Interface for regulator driver for MAXIM 8973 DC-DC step-down
+ * switching regulator.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_MAX8973_H
+#define __LINUX_REGULATOR_MAX8973_H
+
+/*
+ * Control flags for configuration of the device.
+ * Client need to pass this information with ORed
+ */
+#define MAX8973_CONTROL_REMOTE_SENSE_ENABLE			0x00000001
+#define MAX8973_CONTROL_FALLING_SLEW_RATE_ENABLE		0x00000002
+#define MAX8973_CONTROL_OUTPUT_ACTIVE_DISCH_ENABLE		0x00000004
+#define MAX8973_CONTROL_BIAS_ENABLE				0x00000008
+#define MAX8973_CONTROL_PULL_DOWN_ENABLE			0x00000010
+#define MAX8973_CONTROL_FREQ_SHIFT_9PER_ENABLE			0x00000020
+
+#define MAX8973_CONTROL_CLKADV_TRIP_DISABLED			0x00000000
+#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US			0x00010000
+#define MAX8973_CONTROL_CLKADV_TRIP_150mV_PER_US		0x00020000
+#define MAX8973_CONTROL_CLKADV_TRIP_75mV_PER_US_HIST_DIS	0x00030000
+
+#define MAX8973_CONTROL_INDUCTOR_VALUE_NOMINAL			0x00000000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_MINUS_30_PER		0x00100000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_30_PER		0x00200000
+#define MAX8973_CONTROL_INDUCTOR_VALUE_PLUS_60_PER		0x00300000
+
+/*
+ * struct max8973_regulator_platform_data - max8973 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @control_flags: Control flags which are ORed value of above flags to
+ *		configure device.
+ * @enable_ext_control: Enable the voltage enable/disable through external
+ *		control signal from EN input pin. If it is false then
+ *		voltage output will be enabled/disabled through EN bit of
+ *		device register.
+ * @dvs_gpio: GPIO for dvs. It should be -1 if this is tied with fixed logic.
+ * @dvs_def_state: Default state of dvs. 1 if it is high else 0.
+ */
+struct max8973_regulator_platform_data {
+	struct regulator_init_data *reg_init_data;
+	unsigned long control_flags;
+	bool enable_ext_control;
+	int dvs_gpio;
+	unsigned dvs_def_state:1;
+};
+
+#endif /* __LINUX_REGULATOR_MAX8973_H */

include/linux/regulator/tps51632-regulator.h

@@ -0,0 +1,47 @@
+/*
+ * tps51632-regulator.h -- TPS51632 regulator
+ *
+ * Interface for regulator driver for TPS51632 3-2-1 Phase D-Cap Step Down
+ * Driverless Controller with serial VID control and DVFS.
+ *
+ * Copyright (C) 2012 NVIDIA Corporation
+
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA	02110-1301, USA.
+ *
+ */
+
+#ifndef __LINUX_REGULATOR_TPS51632_H
+#define __LINUX_REGULATOR_TPS51632_H
+
+/*
+ * struct tps51632_regulator_platform_data - tps51632 regulator platform data.
+ *
+ * @reg_init_data: The regulator init data.
+ * @enable_pwm_dvfs: Enable PWM DVFS or not.
+ * @dvfs_step_20mV: Step for DVFS is 20mV or 10mV.
+ * @max_voltage_uV: Maximum possible voltage in PWM-DVFS mode.
+ * @base_voltage_uV: Base voltage when PWM-DVFS enabled.
+ */
+struct tps51632_regulator_platform_data {
+	struct regulator_init_data *reg_init_data;
+	bool enable_pwm_dvfs;
+	bool dvfs_step_20mV;
+	int max_voltage_uV;
+	int base_voltage_uV;
+};
+
+#endif /* __LINUX_REGULATOR_TPS51632_H */

include/linux/regulator/tps65090-regulator.h

@@ -1,50 +0,0 @@
-/*
- * Regulator driver interface for TI TPS65090 PMIC family
- *
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
-
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef __REGULATOR_TPS65090_H
-#define __REGULATOR_TPS65090_H
-
-#include <linux/regulator/machine.h>
-
-#define tps65090_rails(_name) "tps65090_"#_name
-
-enum {
-	TPS65090_ID_DCDC1,
-	TPS65090_ID_DCDC2,
-	TPS65090_ID_DCDC3,
-	TPS65090_ID_FET1,
-	TPS65090_ID_FET2,
-	TPS65090_ID_FET3,
-	TPS65090_ID_FET4,
-	TPS65090_ID_FET5,
-	TPS65090_ID_FET6,
-	TPS65090_ID_FET7,
-};
-
-/*
- * struct tps65090_regulator_platform_data
- *
- * @regulator: The regulator init data.
- * @slew_rate_uV_per_us: Slew rate microvolt per microsec.
- */
-
-struct tps65090_regulator_platform_data {
-	struct regulator_init_data regulator;
-};
-
-#endif	/* __REGULATOR_TPS65090_H */