Merge branch 2.6.39-rc7 into usb-linus

This was needed to resolve a conflict in:
	drivers/usb/host/isp1760-hcd.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation/DocBook/media-entities.tmpl

@@ -294,6 +294,7 @@
 <!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml">
 <!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml">
 <!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml">
+<!ENTITY sub-y12 SYSTEM "v4l/pixfmt-y12.xml">
 <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml">
 <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml">
 <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml">

Documentation/DocBook/v4l/media-ioc-setup-link.xml

@@ -34,7 +34,7 @@
       <varlistentry>
 	<term><parameter>request</parameter></term>
 	<listitem>
-	  <para>MEDIA_IOC_ENUM_LINKS</para>
+	  <para>MEDIA_IOC_SETUP_LINK</para>
 	</listitem>
       </varlistentry>
       <varlistentry>

Documentation/DocBook/v4l/pixfmt-y12.xml

@@ -0,0 +1,79 @@
+<refentry id="V4L2-PIX-FMT-Y12">
+  <refmeta>
+    <refentrytitle>V4L2_PIX_FMT_Y12 ('Y12 ')</refentrytitle>
+    &manvol;
+  </refmeta>
+  <refnamediv>
+    <refname><constant>V4L2_PIX_FMT_Y12</constant></refname>
+    <refpurpose>Grey-scale image</refpurpose>
+  </refnamediv>
+  <refsect1>
+    <title>Description</title>
+
+    <para>This is a grey-scale image with a depth of 12 bits per pixel. Pixels
+are stored in 16-bit words with unused high bits padded with 0. The least
+significant byte is stored at lower memory addresses (little-endian).</para>
+
+    <example>
+      <title><constant>V4L2_PIX_FMT_Y12</constant> 4 &times; 4
+pixel image</title>
+
+      <formalpara>
+	<title>Byte Order.</title>
+	<para>Each cell is one byte.
+	  <informaltable frame="none">
+	    <tgroup cols="9" align="center">
+	      <colspec align="left" colwidth="2*" />
+	      <tbody valign="top">
+		<row>
+		  <entry>start&nbsp;+&nbsp;0:</entry>
+		  <entry>Y'<subscript>00low</subscript></entry>
+		  <entry>Y'<subscript>00high</subscript></entry>
+		  <entry>Y'<subscript>01low</subscript></entry>
+		  <entry>Y'<subscript>01high</subscript></entry>
+		  <entry>Y'<subscript>02low</subscript></entry>
+		  <entry>Y'<subscript>02high</subscript></entry>
+		  <entry>Y'<subscript>03low</subscript></entry>
+		  <entry>Y'<subscript>03high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;8:</entry>
+		  <entry>Y'<subscript>10low</subscript></entry>
+		  <entry>Y'<subscript>10high</subscript></entry>
+		  <entry>Y'<subscript>11low</subscript></entry>
+		  <entry>Y'<subscript>11high</subscript></entry>
+		  <entry>Y'<subscript>12low</subscript></entry>
+		  <entry>Y'<subscript>12high</subscript></entry>
+		  <entry>Y'<subscript>13low</subscript></entry>
+		  <entry>Y'<subscript>13high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;16:</entry>
+		  <entry>Y'<subscript>20low</subscript></entry>
+		  <entry>Y'<subscript>20high</subscript></entry>
+		  <entry>Y'<subscript>21low</subscript></entry>
+		  <entry>Y'<subscript>21high</subscript></entry>
+		  <entry>Y'<subscript>22low</subscript></entry>
+		  <entry>Y'<subscript>22high</subscript></entry>
+		  <entry>Y'<subscript>23low</subscript></entry>
+		  <entry>Y'<subscript>23high</subscript></entry>
+		</row>
+		<row>
+		  <entry>start&nbsp;+&nbsp;24:</entry>
+		  <entry>Y'<subscript>30low</subscript></entry>
+		  <entry>Y'<subscript>30high</subscript></entry>
+		  <entry>Y'<subscript>31low</subscript></entry>
+		  <entry>Y'<subscript>31high</subscript></entry>
+		  <entry>Y'<subscript>32low</subscript></entry>
+		  <entry>Y'<subscript>32high</subscript></entry>
+		  <entry>Y'<subscript>33low</subscript></entry>
+		  <entry>Y'<subscript>33high</subscript></entry>
+		</row>
+	      </tbody>
+	    </tgroup>
+	  </informaltable>
+	</para>
+      </formalpara>
+    </example>
+  </refsect1>
+</refentry>

Documentation/DocBook/v4l/pixfmt.xml

@@ -696,6 +696,7 @@ information.</para>
     &sub-packed-yuv;
     &sub-grey;
     &sub-y10;
+    &sub-y12;
     &sub-y16;
     &sub-yuyv;
     &sub-uyvy;

Documentation/DocBook/v4l/subdev-formats.xml

@@ -456,6 +456,23 @@
 	      <entry>b<subscript>1</subscript></entry>
 	      <entry>b<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SGBRG8-1X8">
+	      <entry>V4L2_MBUS_FMT_SGBRG8_1X8</entry>
+	      <entry>0x3013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>g<subscript>7</subscript></entry>
+	      <entry>g<subscript>6</subscript></entry>
+	      <entry>g<subscript>5</subscript></entry>
+	      <entry>g<subscript>4</subscript></entry>
+	      <entry>g<subscript>3</subscript></entry>
+	      <entry>g<subscript>2</subscript></entry>
+	      <entry>g<subscript>1</subscript></entry>
+	      <entry>g<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SGRBG8-1X8">
 	      <entry>V4L2_MBUS_FMT_SGRBG8_1X8</entry>
 	      <entry>0x3002</entry>
@@ -473,6 +490,23 @@
 	      <entry>g<subscript>1</subscript></entry>
 	      <entry>g<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-SRGGB8-1X8">
+	      <entry>V4L2_MBUS_FMT_SRGGB8_1X8</entry>
+	      <entry>0x3014</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>r<subscript>7</subscript></entry>
+	      <entry>r<subscript>6</subscript></entry>
+	      <entry>r<subscript>5</subscript></entry>
+	      <entry>r<subscript>4</subscript></entry>
+	      <entry>r<subscript>3</subscript></entry>
+	      <entry>r<subscript>2</subscript></entry>
+	      <entry>r<subscript>1</subscript></entry>
+	      <entry>r<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-SBGGR10-DPCM8-1X8">
 	      <entry>V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8</entry>
 	      <entry>0x300b</entry>
@@ -2159,6 +2193,31 @@
 	      <entry>u<subscript>1</subscript></entry>
 	      <entry>u<subscript>0</subscript></entry>
 	    </row>
+	    <row id="V4L2-MBUS-FMT-Y12-1X12">
+	      <entry>V4L2_MBUS_FMT_Y12_1X12</entry>
+	      <entry>0x2013</entry>
+	      <entry></entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>-</entry>
+	      <entry>y<subscript>11</subscript></entry>
+	      <entry>y<subscript>10</subscript></entry>
+	      <entry>y<subscript>9</subscript></entry>
+	      <entry>y<subscript>8</subscript></entry>
+	      <entry>y<subscript>7</subscript></entry>
+	      <entry>y<subscript>6</subscript></entry>
+	      <entry>y<subscript>5</subscript></entry>
+	      <entry>y<subscript>4</subscript></entry>
+	      <entry>y<subscript>3</subscript></entry>
+	      <entry>y<subscript>2</subscript></entry>
+	      <entry>y<subscript>1</subscript></entry>
+	      <entry>y<subscript>0</subscript></entry>
+	    </row>
 	    <row id="V4L2-MBUS-FMT-UYVY8-1X16">
 	      <entry>V4L2_MBUS_FMT_UYVY8_1X16</entry>
 	      <entry>0x200f</entry>

Documentation/cgroups/memory.txt

@@ -52,8 +52,10 @@ Brief summary of control files.
  tasks				 # attach a task(thread) and show list of threads
  cgroup.procs			 # show list of processes
  cgroup.event_control		 # an interface for event_fd()
- memory.usage_in_bytes		 # show current memory(RSS+Cache) usage.
- memory.memsw.usage_in_bytes	 # show current memory+Swap usage
+ memory.usage_in_bytes		 # show current res_counter usage for memory
+				 (See 5.5 for details)
+ memory.memsw.usage_in_bytes	 # show current res_counter usage for memory+Swap
+				 (See 5.5 for details)
  memory.limit_in_bytes		 # set/show limit of memory usage
  memory.memsw.limit_in_bytes	 # set/show limit of memory+Swap usage
  memory.failcnt			 # show the number of memory usage hits limits
@@ -453,6 +455,15 @@ memory under it will be reclaimed.
 You can reset failcnt by writing 0 to failcnt file.
 # echo 0 > .../memory.failcnt
 
+5.5 usage_in_bytes
+
+For efficiency, as other kernel components, memory cgroup uses some optimization
+to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the
+method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz
+value for efficient access. (Of course, when necessary, it's synchronized.)
+If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP)
+value in memory.stat(see 5.2).
+
 6. Hierarchy support
 
 The memory controller supports a deep hierarchy and hierarchical accounting.

Documentation/flexible-arrays.txt

@@ -66,10 +66,10 @@ trick is to ensure that any needed memory allocations are done before
 entering atomic context, using:
 
     int flex_array_prealloc(struct flex_array *array, unsigned int start,
-			    unsigned int end, gfp_t flags);
+			    unsigned int nr_elements, gfp_t flags);
 
 This function will ensure that memory for the elements indexed in the range
-defined by start and end has been allocated.  Thereafter, a
+defined by start and nr_elements has been allocated.  Thereafter, a
 flex_array_put() call on an element in that range is guaranteed not to
 block.
 

Documentation/hwmon/adm1021

@@ -14,10 +14,6 @@ Supported chips:
     Prefix: 'gl523sm'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
     Datasheet:
-  * Intel Xeon Processor
-    Prefix: - any other - may require 'force_adm1021' parameter
-    Addresses scanned: none
-    Datasheet: Publicly available at Intel website
   * Maxim MAX1617
     Prefix: 'max1617'
     Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
@@ -91,21 +87,27 @@ will do no harm, but will return 'old' values. It is possible to make
 ADM1021-clones do faster measurements, but there is really no good reason
 for that.
 
-Xeon support
-------------
 
-Some Xeon processors have real max1617, adm1021, or compatible chips
-within them, with two temperature sensors.
+Netburst-based Xeon support
+---------------------------
 
-Other Xeons have chips with only one sensor.
+Some Xeon processors based on the Netburst (early Pentium 4, from 2001 to
+2003) microarchitecture had real MAX1617, ADM1021, or compatible chips
+within them, with two temperature sensors. Other Xeon processors of this
+era (with 400 MHz FSB) had chips with only one temperature sensor.
 
-If you have a Xeon, and the adm1021 module loads, and both temperatures
-appear valid, then things are good.
+If you have such an old Xeon, and you get two valid temperatures when
+loading the adm1021 module, then things are good.
 
-If the adm1021 module doesn't load, you should try this:
-	modprobe adm1021 force_adm1021=BUS,ADDRESS
-	ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
+If nothing happens when loading the adm1021 module, and you are certain
+that your specific Xeon processor model includes compatible sensors, you
+will have to explicitly instantiate the sensor chips from user-space. See
+method 4 in Documentation/i2c/instantiating-devices. Possible slave
+addresses are 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e. It is likely that
+only temp2 will be correct and temp1 will have to be ignored.
 
-If you have dual Xeons you may have appear to have two separate
-adm1021-compatible chips, or two single-temperature sensors, at distinct
-addresses.
+Previous generations of the Xeon processor (based on Pentium II/III)
+didn't have these sensors. Next generations of Xeon processors (533 MHz
+FSB and faster) lost them, until the Core-based generation which
+introduced integrated digital thermal sensors. These are supported by
+the coretemp driver.

Documentation/hwmon/lm90

@@ -32,6 +32,16 @@ Supported chips:
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the ON Semiconductor website
                http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461
+  * Analog Devices ADT7461A
+    Prefix: 'adt7461a'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=ADT7461A
+  * ON Semiconductor NCT1008
+    Prefix: 'nct1008'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: Publicly available at the ON Semiconductor website
+               http://www.onsemi.com/PowerSolutions/product.do?id=NCT1008
   * Maxim MAX6646
     Prefix: 'max6646'
     Addresses scanned: I2C 0x4d
@@ -149,7 +159,7 @@ ADM1032:
   * ALERT is triggered by open remote sensor.
   * SMBus PEC support for Write Byte and Receive Byte transactions.
 
-ADT7461:
+ADT7461, ADT7461A, NCT1008:
   * Extended temperature range (breaks compatibility)
   * Lower resolution for remote temperature
 
@@ -195,9 +205,9 @@ are exported, one for each channel, but these values are of course linked.
 Only the local hysteresis can be set from user-space, and the same delta
 applies to the remote hysteresis.
 
-The lm90 driver will not update its values more frequently than every
-other second; reading them more often will do no harm, but will return
-'old' values.
+The lm90 driver will not update its values more frequently than configured with
+the update_interval attribute; reading them more often will do no harm, but will
+return 'old' values.
 
 SMBus Alert Support
 -------------------
@@ -205,11 +215,12 @@ SMBus Alert Support
 This driver has basic support for SMBus alert. When an alert is received,
 the status register is read and the faulty temperature channel is logged.
 
-The Analog Devices chips (ADM1032 and ADT7461) do not implement the SMBus
-alert protocol properly so additional care is needed: the ALERT output is
-disabled when an alert is received, and is re-enabled only when the alarm
-is gone. Otherwise the chip would block alerts from other chips in the bus
-as long as the alarm is active.
+The Analog Devices chips (ADM1032, ADT7461 and ADT7461A) and ON
+Semiconductor chips (NCT1008) do not implement the SMBus alert protocol
+properly so additional care is needed: the ALERT output is disabled when
+an alert is received, and is re-enabled only when the alarm is gone.
+Otherwise the chip would block alerts from other chips in the bus as long
+as the alarm is active.
 
 PEC Support
 -----------

Documentation/hwmon/max16064

@@ -0,0 +1,62 @@
+Kernel driver max16064
+======================
+
+Supported chips:
+  * Maxim MAX16064
+    Prefix: 'max16064'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply
+Controller with Active-Voltage Output Control and PMBus Interface.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-4]_label		"vout[1-4]"
+in[1-4]_input		Measured voltage. From READ_VOUT register.
+in[1-4]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-4]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-4]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-4]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-4]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-4]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+temp1_input		Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm		Chip temperature high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+			status is set.
+temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+			status is set.

Documentation/hwmon/max34440

@@ -0,0 +1,79 @@
+Kernel driver max34440
+======================
+
+Supported chips:
+  * Maxim MAX34440
+    Prefixes: 'max34440'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
+  * Maxim MAX34441
+    PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
+    Prefixes: 'max34441'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
+Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-6]_label		"vout[1-6]".
+in[1-6]_input		Measured voltage. From READ_VOUT register.
+in[1-6]_min		Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_max		Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-6]_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-6]_min_alarm	Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-6]_max_alarm	Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-6]_lcrit_alarm	Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-6]_crit_alarm	Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr[1-6]_label		"iout[1-6]".
+curr[1-6]_input		Measured current. From READ_IOUT register.
+curr[1-6]_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-6]_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[1-6]_max_alarm	Current high alarm. From IOUT_OC_WARNING status.
+curr[1-6]_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+			in6 and curr6 attributes only exist for MAX34440.
+
+temp[1-8]_input		Measured temperatures. From READ_TEMPERATURE_1 register.
+			temp1 is the chip's internal temperature. temp2..temp5
+			are remote I2C temperature sensors. For MAX34441, temp6
+			is a remote thermal-diode sensor. For MAX34440, temp6..8
+			are remote I2C temperature sensors.
+temp[1-8]_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-8]_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-8]_max_alarm	Temperature high alarm.
+temp[1-8]_crit_alarm	Temperature critical high alarm.
+
+			temp7 and temp8 attributes only exist for MAX34440.

Documentation/hwmon/max8688

@@ -0,0 +1,69 @@
+Kernel driver max8688
+=====================
+
+Supported chips:
+  * Maxim MAX8688
+    Prefix: 'max8688'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
+Controller/Monitor with PMBus Interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label		"vout1"
+in1_input		Measured voltage. From READ_VOUT register.
+in1_min			Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max			Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_lcrit		Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_crit		Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in1_min_alarm		Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm		Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in1_lcrit_alarm		Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in1_crit_alarm		Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label		"iout1"
+curr1_input		Measured current. From READ_IOUT register.
+curr1_max		Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit		Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr1_max_alarm		Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_crit_alarm	Current critical high alarm. From IOUT_OC_FAULT status.
+
+temp1_input		Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max		Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit		Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm		Chip temperature high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+			status is set.
+temp1_crit_alarm	Chip temperature critical high alarm. Set by comparing
+			READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+			status is set.

Documentation/hwmon/pmbus

@@ -13,26 +13,6 @@ Supported chips:
     Prefix: 'ltc2978'
     Addresses scanned: -
     Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
-  * Maxim MAX16064
-    Quad Power-Supply Controller
-    Prefix: 'max16064'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
-  * Maxim MAX34440
-    PMBus 6-Channel Power-Supply Manager
-    Prefixes: 'max34440'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
-  * Maxim MAX34441
-    PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
-    Prefixes: 'max34441'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
-  * Maxim MAX8688
-    Digital Power-Supply Controller/Monitor
-    Prefix: 'max8688'
-    Addresses scanned: -
-    Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
   * Generic PMBus devices
     Prefix: 'pmbus'
     Addresses scanned: -
@@ -175,11 +155,13 @@ currX_crit		Critical maximum current.
 			From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
 currX_alarm		Current high alarm.
 			From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm		Current high alarm.
+			From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
 currX_lcrit_alarm	Output current critical low alarm.
 			From IOUT_UC_FAULT status.
 currX_crit_alarm	Current critical high alarm.
 			From IIN_OC_FAULT or IOUT_OC_FAULT status.
-currX_label		"iin" or "vinY"
+currX_label		"iin" or "ioutY"
 
 powerX_input		Measured power. From READ_PIN or READ_POUT register.
 powerX_cap		Output power cap. From POUT_MAX register.
@@ -193,13 +175,13 @@ powerX_crit_alarm	Output power critical high alarm.
 			From POUT_OP_FAULT status.
 powerX_label		"pin" or "poutY"
 
-tempX_input		Measured tempererature.
+tempX_input		Measured temperature.
 			From READ_TEMPERATURE_X register.
-tempX_min		Mimimum tempererature. From UT_WARN_LIMIT register.
-tempX_max		Maximum tempererature. From OT_WARN_LIMIT register.
-tempX_lcrit		Critical low tempererature.
+tempX_min		Mimimum temperature. From UT_WARN_LIMIT register.
+tempX_max		Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit		Critical low temperature.
 			From UT_FAULT_LIMIT register.
-tempX_crit		Critical high tempererature.
+tempX_crit		Critical high temperature.
 			From OT_FAULT_LIMIT register.
 tempX_min_alarm		Chip temperature low alarm. Set by comparing
 			READ_TEMPERATURE_X with UT_WARN_LIMIT if

Documentation/hwmon/smm665

@@ -150,8 +150,8 @@ in8_crit_alarm		Channel F critical alarm
 in9_crit_alarm		AIN1 critical alarm
 in10_crit_alarm		AIN2 critical alarm
 
-temp1_input		Chip tempererature
-temp1_min		Mimimum chip tempererature
-temp1_max		Maximum chip tempererature
-temp1_crit		Critical chip tempererature
+temp1_input		Chip temperature
+temp1_min		Mimimum chip temperature
+temp1_max		Maximum chip temperature
+temp1_crit		Critical chip temperature
 temp1_crit_alarm	Temperature critical alarm

Documentation/hwmon/submitting-patches

@@ -0,0 +1,109 @@
+	How to Get Your Patch Accepted Into the Hwmon Subsystem
+	-------------------------------------------------------
+
+This text is is a collection of suggestions for people writing patches or
+drivers for the hwmon subsystem. Following these suggestions will greatly
+increase the chances of your change being accepted.
+
+
+1. General
+----------
+
+* It should be unnecessary to mention, but please read and follow
+    Documentation/SubmitChecklist
+    Documentation/SubmittingDrivers
+    Documentation/SubmittingPatches
+    Documentation/CodingStyle
+
+* If your patch generates checkpatch warnings, please refrain from explanations
+  such as "I don't like that coding style". Keep in mind that each unnecessary
+  warning helps hiding a real problem. If you don't like the kernel coding
+  style, don't write kernel drivers.
+
+* Please test your patch thoroughly. We are not your test group.
+  Sometimes a patch can not or not completely be tested because of missing
+  hardware. In such cases, you should test-build the code on at least one
+  architecture. If run-time testing was not achieved, it should be written
+  explicitly below the patch header.
+
+* If your patch (or the driver) is affected by configuration options such as
+  CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
+  variants.
+
+
+2. Adding functionality to existing drivers
+-------------------------------------------
+
+* Make sure the documentation in Documentation/hwmon/<driver_name> is up to
+  date.
+
+* Make sure the information in Kconfig is up to date.
+
+* If the added functionality requires some cleanup or structural changes, split
+  your patch into a cleanup part and the actual addition. This makes it easier
+  to review your changes, and to bisect any resulting problems.
+
+* Never mix bug fixes, cleanup, and functional enhancements in a single patch.
+
+
+3. New drivers
+--------------
+
+* Running your patch or driver file(s) through checkpatch does not mean its
+  formatting is clean. If unsure about formatting in your new driver, run it
+  through Lindent. Lindent is not perfect, and you may have to do some minor
+  cleanup, but it is a good start.
+
+* Consider adding yourself to MAINTAINERS.
+
+* Document the driver in Documentation/hwmon/<driver_name>.
+
+* Add the driver to Kconfig and Makefile in alphabetical order.
+
+* Make sure that all dependencies are listed in Kconfig. For new drivers, it
+  is most likely prudent to add a dependency on EXPERIMENTAL.
+
+* Avoid forward declarations if you can. Rearrange the code if necessary.
+
+* Avoid calculations in macros and macro-generated functions. While such macros
+  may save a line or so in the source, it obfuscates the code and makes code
+  review more difficult. It may also result in code which is more complicated
+  than necessary. Use inline functions or just regular functions instead.
+
+* If the driver has a detect function, make sure it is silent. Debug messages
+  and messages printed after a successful detection are acceptable, but it
+  must not print messages such as "Chip XXX not found/supported".
+
+  Keep in mind that the detect function will run for all drivers supporting an
+  address if a chip is detected on that address. Unnecessary messages will just
+  pollute the kernel log and not provide any value.
+
+* Provide a detect function if and only if a chip can be detected reliably.
+
+* Avoid writing to chip registers in the detect function. If you have to write,
+  only do it after you have already gathered enough data to be certain that the
+  detection is going to be successful.
+
+  Keep in mind that the chip might not be what your driver believes it is, and
+  writing to it might cause a bad misconfiguration.
+
+* Make sure there are no race conditions in the probe function. Specifically,
+  completely initialize your chip first, then create sysfs entries and register
+  with the hwmon subsystem.
+
+* Do not provide support for deprecated sysfs attributes.
+
+* Do not create non-standard attributes unless really needed. If you have to use
+  non-standard attributes, or you believe you do, discuss it on the mailing list
+  first. Either case, provide a detailed explanation why you need the
+  non-standard attribute(s).
+  Standard attributes are specified in Documentation/hwmon/sysfs-interface.
+
+* When deciding which sysfs attributes to support, look at the chip's
+  capabilities. While we do not expect your driver to support everything the
+  chip may offer, it should at least support all limits and alarms.
+
+* Last but not least, please check if a driver for your chip already exists
+  before starting to write a new driver. Especially for temperature sensors,
+  new chips are often variants of previously released chips. In some cases,
+  a presumably new chip may simply have been relabeled.

Documentation/md.txt

@@ -552,6 +552,16 @@ also have
      within the array where IO will be blocked.  This is currently
      only supported for raid4/5/6.
 
+   sync_min
+   sync_max
+     The two values, given as numbers of sectors, indicate a range
+     withing the array where 'check'/'repair' will operate. Must be
+     a multiple of chunk_size. When it reaches "sync_max" it will
+     pause, rather than complete.
+     You can use 'select' or 'poll' on "sync_completed" to wait for
+     that number to reach sync_max.  Then you can either increase
+     "sync_max", or can write 'idle' to "sync_action".
+
 
 Each active md device may also have attributes specific to the
 personality module that manages it.

Documentation/sound/alsa/SB-Live-mixer.txt

@@ -87,14 +87,14 @@ accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
 The result is forwarded to the ADC capture FIFO (thus to the standard capture
 PCM device).
 
-name='Music Playback Volume',index=0
+name='Synth Playback Volume',index=0
 
 This control is used to attenuate samples for left and right MIDI FX-bus
 accumulators. ALSA uses accumulators 4 and 5 for left and right MIDI samples.
 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
 
-name='Music Capture Volume',index=0
-name='Music Capture Switch',index=0
+name='Synth Capture Volume',index=0
+name='Synth Capture Switch',index=0
 
 These controls are used to attenuate samples for left and right MIDI FX-bus
 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.

Documentation/video4linux/sh_mobile_ceu_camera.txt

@@ -37,7 +37,7 @@ Generic scaling / cropping scheme
 -1'-
 
 In the above chart minuses and slashes represent "real" data amounts, points and
-accents represent "useful" data, basically, CEU scaled amd cropped output,
+accents represent "useful" data, basically, CEU scaled and cropped output,
 mapped back onto the client's source plane.
 
 Such a configuration can be produced by user requests:
@@ -65,7 +65,7 @@ Do not touch input rectangle - it is already optimal.
 
 1. Calculate current sensor scales:
 
-	scale_s = ((3') - (3)) / ((2') - (2))
+	scale_s = ((2') - (2)) / ((3') - (3))
 
 2. Calculate "effective" input crop (sensor subwindow) - CEU crop scaled back at
 current sensor scales onto input window - this is user S_CROP:
@@ -80,7 +80,7 @@ window:
 4. Calculate sensor output window by applying combined scales to real input
 window:
 
-	width_s_out = ((2') - (2)) / scale_comb
+	width_s_out = ((7') - (7)) = ((2') - (2)) / scale_comb
 
 5. Apply iterative sensor S_FMT for sensor output window.
 

Documentation/workqueue.txt

@@ -12,6 +12,7 @@ CONTENTS
 4. Application Programming Interface (API)
 5. Example Execution Scenarios
 6. Guidelines
+7. Debugging
 
 
 1. Introduction
@@ -379,3 +380,42 @@ If q1 has WQ_CPU_INTENSIVE set,
 * Unless work items are expected to consume a huge amount of CPU
   cycles, using a bound wq is usually beneficial due to the increased
   level of locality in wq operations and work item execution.
+
+
+7. Debugging
+
+Because the work functions are executed by generic worker threads
+there are a few tricks needed to shed some light on misbehaving
+workqueue users.
+
+Worker threads show up in the process list as:
+
+root      5671  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/0:1]
+root      5672  0.0  0.0      0     0 ?        S    12:07   0:00 [kworker/1:2]
+root      5673  0.0  0.0      0     0 ?        S    12:12   0:00 [kworker/0:0]
+root      5674  0.0  0.0      0     0 ?        S    12:13   0:00 [kworker/1:0]
+
+If kworkers are going crazy (using too much cpu), there are two types
+of possible problems:
+
+	1. Something beeing scheduled in rapid succession
+	2. A single work item that consumes lots of cpu cycles
+
+The first one can be tracked using tracing:
+
+	$ echo workqueue:workqueue_queue_work > /sys/kernel/debug/tracing/set_event
+	$ cat /sys/kernel/debug/tracing/trace_pipe > out.txt
+	(wait a few secs)
+	^C
+
+If something is busy looping on work queueing, it would be dominating
+the output and the offender can be determined with the work item
+function.
+
+For the second type of problems it should be possible to just check
+the stack trace of the offending worker thread.
+
+	$ cat /proc/THE_OFFENDING_KWORKER/stack
+
+The work item's function should be trivially visible in the stack
+trace.

MAINTAINERS

@@ -151,6 +151,7 @@ S:	Maintained
 F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
+M:	Realtek linux nic maintainers <nic_swsd@realtek.com>
 M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -1031,12 +1032,13 @@ W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c64xx/
 
-ARM/S5P ARM ARCHITECTURES
+ARM/S5P EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-s5p*/
+F:	arch/arm/mach-exynos*/
 
 ARM/SAMSUNG MOBILE MACHINE SUPPORT
 M:	Kyungmin Park <kyungmin.park@samsung.com>
@@ -2807,7 +2809,7 @@ GPIO SUBSYSTEM
 M:	Grant Likely <grant.likely@secretlab.ca>
 S:	Maintained
 T:	git git://git.secretlab.ca/git/linux-2.6.git
-F:	Documentation/gpio/gpio.txt
+F:	Documentation/gpio.txt
 F:	drivers/gpio/
 F:	include/linux/gpio*
 
@@ -5395,7 +5397,7 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassi.brar@samsung.com>
+M:	Jassi Brar <jassisinghbrar@gmail.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/samsung
@@ -6554,7 +6556,7 @@ S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-M:	David Brownell <dbrownell@users.sourceforge.net>
+M:	Oliver Neukum <oneukum@suse.de>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -6920,6 +6922,18 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.
 S:	Maintained
 F:	drivers/platform/x86
 
+XEN HYPERVISOR INTERFACE
+M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
+M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
+L:	virtualization@lists.linux-foundation.org
+S:	Supported
+F:	arch/x86/xen/
+F:	drivers/*/xen-*front.c
+F:	drivers/xen/
+F:	arch/x86/include/asm/xen/
+F:	include/xen/
+
 XEN NETWORK BACKEND DRIVER
 M:	Ian Campbell <ian.campbell@citrix.com>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
@@ -6941,18 +6955,6 @@ S:	Supported
 F:	arch/x86/xen/*swiotlb*
 F:	drivers/xen/*swiotlb*
 
-XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
-L:	virtualization@lists.linux-foundation.org
-S:	Supported
-F:	arch/x86/xen/
-F:	drivers/*/xen-*front.c
-F:	drivers/xen/
-F:	arch/x86/include/asm/xen/
-F:	include/xen/
-
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
 M:	Alex Elder <aelder@sgi.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 39
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc7
 NAME = Flesh-Eating Bats with Fangs
 
 # *DOCUMENTATION*

arch/arm/configs/at91x40_defconfig

@@ -0,0 +1,48 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_ELF_CORE is not set
+# CONFIG_FUTEX is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91X40=y
+CONFIG_MACH_AT91EB01=y
+CONFIG_AT91_EARLY_USART0=y
+CONFIG_CPU_ARM7TDMI=y
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0x01000000
+CONFIG_DRAM_SIZE=0x00400000
+CONFIG_FLASH_MEM_BASE=0x01400000
+CONFIG_PROCESSOR_ID=0x14000040
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_BINFMT_FLAT=y
+# CONFIG_SUSPEND is not set
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ENABLE_MUST_CHECK is not set

arch/arm/include/asm/cputype.h

@@ -2,6 +2,7 @@
 #define __ASM_ARM_CPUTYPE_H
 
 #include <linux/stringify.h>
+#include <linux/kernel.h>
 
 #define CPUID_ID	0
 #define CPUID_CACHETYPE	1

arch/arm/include/asm/kprobes.h

@@ -39,10 +39,13 @@ typedef u32 kprobe_opcode_t;
 struct kprobe;
 typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
 
+typedef unsigned long (kprobe_check_cc)(unsigned long);
+
 /* Architecture specific copy of original instruction. */
 struct arch_specific_insn {
 	kprobe_opcode_t		*insn;
 	kprobe_insn_handler_t	*insn_handler;
+	kprobe_check_cc		*insn_check_cc;
 };
 
 struct prev_kprobe {

arch/arm/include/asm/unistd.h

@@ -396,6 +396,10 @@
 #define __NR_fanotify_init		(__NR_SYSCALL_BASE+367)
 #define __NR_fanotify_mark		(__NR_SYSCALL_BASE+368)
 #define __NR_prlimit64			(__NR_SYSCALL_BASE+369)
+#define __NR_name_to_handle_at		(__NR_SYSCALL_BASE+370)
+#define __NR_open_by_handle_at		(__NR_SYSCALL_BASE+371)
+#define __NR_clock_adjtime		(__NR_SYSCALL_BASE+372)
+#define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/calls.S

@@ -379,6 +379,10 @@
 		CALL(sys_fanotify_init)
 		CALL(sys_fanotify_mark)
 		CALL(sys_prlimit64)
+/* 370 */	CALL(sys_name_to_handle_at)
+		CALL(sys_open_by_handle_at)
+		CALL(sys_clock_adjtime)
+		CALL(sys_syncfs)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/kprobes.c

@@ -134,7 +134,8 @@ static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
 				 struct kprobe_ctlblk *kcb)
 {
 	regs->ARM_pc += 4;
-	p->ainsn.insn_handler(p, regs);
+	if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
+		p->ainsn.insn_handler(p, regs);
 }
 
 /*

arch/arm/kernel/perf_event.c

@@ -746,7 +746,8 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
 
 	tail = (struct frame_tail __user *)regs->ARM_fp - 1;
 
-	while (tail && !((unsigned long)tail & 0x3))
+	while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+	       tail && !((unsigned long)tail & 0x3))
 		tail = user_backtrace(tail, entry);
 }
 

arch/arm/kernel/ptrace.c

@@ -767,12 +767,20 @@ long arch_ptrace(struct task_struct *child, long request,
 
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 		case PTRACE_GETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_gethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 		case PTRACE_SETHBPREGS:
+			if (ptrace_get_breakpoints(child) < 0)
+				return -ESRCH;
+
 			ret = ptrace_sethbpregs(child, addr,
 						(unsigned long __user *)data);
+			ptrace_put_breakpoints(child);
 			break;
 #endif
 

arch/arm/kernel/smp.c

@@ -479,7 +479,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void broadcast_timer_setup(struct clock_event_device *evt)
+static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |

arch/arm/kernel/sys_oabi-compat.c

@@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int semid,
 	long err;
 	int i;
 
-	if (nsops < 1)
+	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)

arch/arm/mach-at91/Kconfig

@@ -83,6 +83,7 @@ config ARCH_AT91CAP9
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
+	select HAVE_NET_MACB
 
 config ARCH_AT572D940HF
 	bool "AT572D940HF"

arch/arm/mach-at91/board-eb01.c

@@ -30,6 +30,11 @@
 #include <mach/board.h>
 #include "generic.h"
 
+static void __init at91eb01_init_irq(void)
+{
+	at91x40_init_interrupts(NULL);
+}
+
 static void __init at91eb01_map_io(void)
 {
 	at91x40_initialize(40000000);
@@ -38,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
-	.init_irq	= at91x40_init_interrupts,
+	.init_irq	= at91eb01_init_irq,
 	.map_io		= at91eb01_map_io,
 MACHINE_END
 

arch/arm/mach-at91/include/mach/cpu.h

@@ -27,6 +27,7 @@
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -55,6 +56,12 @@ static inline unsigned long at91_cpu_fully_identify(void)
 #define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
 static inline unsigned long at91_exid_identify(void)
 {
 	return at91_sys_read(AT91_DBGU_EXID);
@@ -143,6 +150,27 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9m11()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9X5
+#define cpu_is_at91sam9x5()	(at91_cpu_identify() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X35))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+				(at91_exid_identify() == ARCH_EXID_AT91SAM9X25))
+#else
+#define cpu_is_at91sam9x5()	(0)
+#define cpu_is_at91sam9g15()	(0)
+#define cpu_is_at91sam9g35()	(0)
+#define cpu_is_at91sam9x35()	(0)
+#define cpu_is_at91sam9g25()	(0)
+#define cpu_is_at91sam9x25()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91CAP9
 #define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
 #define cpu_is_at91cap9_revB()	(at91cap9_rev_identify() == ARCH_REVISION_CAP9_B)

arch/arm/mach-davinci/Kconfig

@@ -63,6 +63,7 @@ config MACH_DAVINCI_EVM
 	depends on ARCH_DAVINCI_DM644x
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
@@ -72,6 +73,7 @@ config MACH_SFFSDR
 	depends on ARCH_DAVINCI_DM644x
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
@@ -105,6 +107,7 @@ config MACH_DAVINCI_DM6467_EVM
 	select MACH_DAVINCI_DM6467TEVM
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -118,6 +121,7 @@ config MACH_DAVINCI_DM365_EVM
 	depends on ARCH_DAVINCI_DM365
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Configure this option to specify whether the board used
 	  for development is a DM365 EVM
@@ -129,6 +133,7 @@ config MACH_DAVINCI_DA830_EVM
 	select GPIO_PCF857X
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
 
@@ -205,6 +210,7 @@ config MACH_MITYOMAPL138
 	depends on ARCH_DAVINCI_DA850
 	select MISC_DEVICES
 	select EEPROM_AT24
+	select I2C
 	help
 	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
 	  System on Module.  Information on this SoM may be found at

arch/arm/mach-davinci/board-mityomapl138.c

@@ -29,7 +29,7 @@
 #include <mach/mux.h>
 #include <mach/spi.h>
 
-#define MITYOMAPL138_PHY_ID		"0:03"
+#define MITYOMAPL138_PHY_ID		""
 
 #define FACTORY_CONFIG_MAGIC	0x012C0138
 #define FACTORY_CONFIG_VERSION	0x00010001
@@ -414,7 +414,7 @@ static struct resource mityomapl138_nandflash_resource[] = {
 
 static struct platform_device mityomapl138_nandflash_device = {
 	.name		= "davinci_nand",
-	.id		= 0,
+	.id		= 1,
 	.dev		= {
 		.platform_data	= &mityomapl138_nandflash_data,
 	},

arch/arm/mach-davinci/devices-da8xx.c

@@ -39,7 +39,8 @@
 #define DA8XX_GPIO_BASE			0x01e26000
 #define DA8XX_I2C1_BASE			0x01e28000
 #define DA8XX_SPI0_BASE			0x01c41000
-#define DA8XX_SPI1_BASE			0x01f0e000
+#define DA830_SPI1_BASE			0x01e12000
+#define DA850_SPI1_BASE			0x01f0e000
 
 #define DA8XX_EMAC_CTRL_REG_OFFSET	0x3000
 #define DA8XX_EMAC_MOD_REG_OFFSET	0x2000
@@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
 
 static struct resource da8xx_spi1_resources[] = {
 	[0] = {
-		.start	= DA8XX_SPI1_BASE,
-		.end	= DA8XX_SPI1_BASE + SZ_4K - 1,
+		.start	= DA830_SPI1_BASE,
+		.end	= DA830_SPI1_BASE + SZ_4K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
 
 	da8xx_spi_pdata[instance].num_chipselect = len;
 
+	if (instance == 1 && cpu_is_davinci_da850()) {
+		da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
+		da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
+	}
+
 	return platform_device_register(&da8xx_spi_device[instance]);
 }

arch/arm/mach-davinci/dm355.c

@@ -314,7 +314,7 @@ static struct clk timer2_clk = {
 	.name = "timer2",
 	.parent = &pll1_aux_clk,
 	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why can't' this be disabled? */
+	.usecount = 1,              /* REVISIT: why can't this be disabled? */
 };
 
 static struct clk timer3_clk = {

arch/arm/mach-davinci/dm644x.c

@@ -274,7 +274,7 @@ static struct clk timer2_clk = {
 	.name = "timer2",
 	.parent = &pll1_aux_clk,
 	.lpsc = DAVINCI_LPSC_TIMER2,
-	.usecount = 1,              /* REVISIT: why can't' this be disabled? */
+	.usecount = 1,              /* REVISIT: why can't this be disabled? */
 };
 
 static struct clk_lookup dm644x_clks[] = {

arch/arm/mach-davinci/include/mach/debug-macro.S

@@ -24,6 +24,9 @@
 
 #define UART_SHIFT	2
 
+#define davinci_uart_v2p(x)	((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
+#define davinci_uart_p2v(x)	((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
+
 		.pushsection .data
 davinci_uart_phys:	.word	0
 davinci_uart_virt:	.word	0
@@ -34,7 +37,7 @@ davinci_uart_virt:	.word	0
 		/* Use davinci_uart_phys/virt if already configured */
 10:		mrc	p15, 0, \rp, c1, c0
 		tst	\rp, #1			@ MMU enabled?
-		ldreq	\rp, =__virt_to_phys(davinci_uart_phys)
+		ldreq	\rp, =davinci_uart_v2p(davinci_uart_phys)
 		ldrne	\rp, =davinci_uart_phys
 		add	\rv, \rp, #4		@ davinci_uart_virt
 		ldr	\rp, [\rp, #0]
@@ -48,18 +51,18 @@ davinci_uart_virt:	.word	0
 		tst	\rp, #1			@ MMU enabled?
 
 		/* Copy uart phys address from decompressor uart info */
-		ldreq	\rv, =__virt_to_phys(davinci_uart_phys)
+		ldreq	\rv, =davinci_uart_v2p(davinci_uart_phys)
 		ldrne	\rv, =davinci_uart_phys
 		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
 		ldr	\rp, [\rp, #0]
 		str	\rp, [\rv]
 
 		/* Copy uart virt address from decompressor uart info */
-		ldreq	\rv, =__virt_to_phys(davinci_uart_virt)
+		ldreq	\rv, =davinci_uart_v2p(davinci_uart_virt)
 		ldrne	\rv, =davinci_uart_virt
 		ldreq	\rp, =DAVINCI_UART_INFO
-		ldrne	\rp, =__phys_to_virt(DAVINCI_UART_INFO)
+		ldrne	\rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
 		ldr	\rp, [\rp, #4]
 		str	\rp, [\rv]
 

arch/arm/mach-davinci/include/mach/serial.h

@@ -22,7 +22,7 @@
  *
  * This area sits just below the page tables (see arch/arm/kernel/head.S).
  */
-#define DAVINCI_UART_INFO	(PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO	(PLAT_PHYS_OFFSET + 0x3ff8)
 
 #define DAVINCI_UART0_BASE	(IO_PHYS + 0x20000)
 #define DAVINCI_UART1_BASE	(IO_PHYS + 0x20400)

arch/arm/mach-mx3/mach-vpr200.c

@@ -257,11 +257,16 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.workaround	= FLS_USB2_WORKAROUND_ENGCM09152,
 };
 
+static int vpr200_usbh_init(struct platform_device *pdev)
+{
+	return mx35_initialize_usb_hw(pdev->id,
+			MXC_EHCI_INTERFACE_SINGLE_UNI | MXC_EHCI_INTERNAL_PHY);
+}
+
 /* USB HOST config */
 static const struct mxc_usbh_platform_data usb_host_pdata __initconst = {
-	.portsc		= MXC_EHCI_MODE_SERIAL,
-	.flags		= MXC_EHCI_INTERFACE_SINGLE_UNI |
-			  MXC_EHCI_INTERNAL_PHY,
+	.init = vpr200_usbh_init,
+	.portsc = MXC_EHCI_MODE_SERIAL,
 };
 
 static struct platform_device *devices[] __initdata = {

arch/arm/mach-mx5/board-mx53_loco.c

@@ -193,7 +193,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = {
 	.wakeup		= wake,					\
 }
 
-static const struct gpio_keys_button loco_buttons[] __initconst = {
+static struct gpio_keys_button loco_buttons[] = {
 	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
 	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
 	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),

arch/arm/mach-mxs/clock-mx28.c

@@ -295,11 +295,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	unsigned long diff, parent_rate, calc_rate;			\
 	int i;								\
 									\
-	parent_rate = clk_get_rate(clk->parent);			\
 	div_max = BM_CLKCTRL_##dr##_DIV >> BP_CLKCTRL_##dr##_DIV;	\
 	bm_busy = BM_CLKCTRL_##dr##_BUSY;				\
 									\
 	if (clk->parent == &ref_xtal_clk) {				\
+		parent_rate = clk_get_rate(clk->parent);		\
 		div = DIV_ROUND_UP(parent_rate, rate);			\
 		if (clk == &cpu_clk) {					\
 			div_max = BM_CLKCTRL_CPU_DIV_XTAL >>		\
@@ -309,6 +309,11 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 		if (div == 0 || div > div_max)				\
 			return -EINVAL;					\
 	} else {							\
+		/*							\
+		 * hack alert: this block modifies clk->parent, too,	\
+		 * so the base to use it the grand parent.		\
+		 */							\
+		parent_rate = clk_get_rate(clk->parent->parent);	\
 		rate >>= PARENT_RATE_SHIFT;				\
 		parent_rate >>= PARENT_RATE_SHIFT;			\
 		diff = parent_rate;					\

arch/arm/mach-omap2/Makefile

@@ -68,7 +68,7 @@ obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
 obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
-AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a
+AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)
 
 ifeq ($(CONFIG_PM_VERBOSE),y)
 CFLAGS_pm_bus.o				+= -DDEBUG

arch/arm/mach-omap2/board-rx51.c

@@ -141,14 +141,19 @@ static void __init rx51_init(void)
 static void __init rx51_map_io(void)
 {
 	omap2_set_globals_3xxx();
-	rx51_video_mem_init();
 	omap34xx_map_common_io();
 }
 
+static void __init rx51_reserve(void)
+{
+	rx51_video_mem_init();
+	omap_reserve();
+}
+
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.boot_params	= 0x80000100,
-	.reserve	= omap_reserve,
+	.reserve	= rx51_reserve,
 	.map_io		= rx51_map_io,
 	.init_early	= rx51_init_early,
 	.init_irq	= omap_init_irq,

arch/arm/mach-omap2/clock44xx_data.c

@@ -3116,14 +3116,9 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"dsp_fck",			&dsp_fck,	CK_443X),
 	CLK("omapdss_dss",	"sys_clk",			&dss_sys_clk,	CK_443X),
 	CLK("omapdss_dss",	"tv_clk",			&dss_tv_clk,	CK_443X),
-	CLK("omapdss_dss",	"dss_clk",			&dss_dss_clk,	CK_443X),
 	CLK("omapdss_dss",	"video_clk",			&dss_48mhz_clk,	CK_443X),
-	CLK("omapdss_dss",	"fck",				&dss_fck,	CK_443X),
-	/*
-	 * On OMAP4, DSS ick is a dummy clock; this is needed for compatibility
-	 * with OMAP2/3.
-	 */
-	CLK("omapdss_dss",	"ick",				&dummy_ck,	CK_443X),
+	CLK("omapdss_dss",	"fck",				&dss_dss_clk,	CK_443X),
+	CLK("omapdss_dss",	"ick",				&dss_fck,	CK_443X),
 	CLK(NULL,	"efuse_ctrl_cust_fck",		&efuse_ctrl_cust_fck,	CK_443X),
 	CLK(NULL,	"emif1_fck",			&emif1_fck,	CK_443X),
 	CLK(NULL,	"emif2_fck",			&emif2_fck,	CK_443X),

arch/arm/mach-omap2/cm2xxx_3xxx.c

@@ -247,6 +247,7 @@ struct omap3_cm_regs {
 	u32 per_cm_clksel;
 	u32 emu_cm_clksel;
 	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle;
 	u32 pll_cm_autoidle2;
 	u32 pll_cm_clksel4;
 	u32 pll_cm_clksel5;
@@ -319,6 +320,15 @@ void omap3_cm_save_context(void)
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
 	cm_context.emu_cm_clkstctrl =
 		omap2_cm_read_mod_reg(OMAP3430_EMU_MOD, OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, even though this register has been saved in
+	 * scratchpad contents, we need to restore AUTO_PERIPH_DPLL
+	 * by ourselves. So, we need to save it anyway.
+	 */
+	cm_context.pll_cm_autoidle =
+		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE);
 	cm_context.pll_cm_autoidle2 =
 		omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
 	cm_context.pll_cm_clksel4 =
@@ -441,6 +451,13 @@ void omap3_cm_restore_context(void)
 			       CM_CLKSEL1);
 	omap2_cm_write_mod_reg(cm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
 			       OMAP2_CM_CLKSTCTRL);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL.AUTO_PERIPH_DPLL == 1.
+	 * In this case, we need to restore AUTO_PERIPH_DPLL by ourselves.
+	 */
+	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle, PLL_MOD,
+			       CM_AUTOIDLE);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_autoidle2, PLL_MOD,
 			       CM_AUTOIDLE2);
 	omap2_cm_write_mod_reg(cm_context.pll_cm_clksel4, PLL_MOD,

arch/arm/mach-omap2/control.c

@@ -316,8 +316,14 @@ void omap3_save_scratchpad_contents(void)
 			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
 	prcm_block_contents.cm_clken_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	/*
+	 * As per erratum i671, ROM code does not respect the PER DPLL
+	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
+	 * Then,  in anycase, clear these bits to avoid extra latencies.
+	 */
 	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
+			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
 	prcm_block_contents.cm_clksel1_pll =
 			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
 	prcm_block_contents.cm_clksel2_pll =

arch/arm/mach-omap2/omap_hwmod_2420_data.c

@@ -1639,6 +1639,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1669,6 +1670,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1699,6 +1701,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1729,6 +1732,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2420_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap242x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap242x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1782,7 +1786,7 @@ static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_hwmod_2430_data.c

@@ -1742,6 +1742,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio1_irqs),
 	.main_clk	= "gpios_fck",
@@ -1772,6 +1773,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio2_irqs),
 	.main_clk	= "gpios_fck",
@@ -1802,6 +1804,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio3_irqs),
 	.main_clk	= "gpios_fck",
@@ -1832,6 +1835,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio4_irqs),
 	.main_clk	= "gpios_fck",
@@ -1862,6 +1866,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = {
 
 static struct omap_hwmod omap2430_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap243x_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap243x_gpio5_irqs),
 	.main_clk	= "gpio5_fck",
@@ -1915,7 +1920,7 @@ static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -2141,6 +2141,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio1_hwmod = {
 	.name		= "gpio1",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio1_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio1_irqs),
 	.main_clk	= "gpio1_ick",
@@ -2177,6 +2178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio2_hwmod = {
 	.name		= "gpio2",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio2_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio2_irqs),
 	.main_clk	= "gpio2_ick",
@@ -2213,6 +2215,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio3_hwmod = {
 	.name		= "gpio3",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio3_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio3_irqs),
 	.main_clk	= "gpio3_ick",
@@ -2249,6 +2252,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio4_hwmod = {
 	.name		= "gpio4",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio4_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio4_irqs),
 	.main_clk	= "gpio4_ick",
@@ -2285,6 +2289,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio5_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio5_hwmod = {
 	.name		= "gpio5",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio5_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio5_irqs),
 	.main_clk	= "gpio5_ick",
@@ -2321,6 +2326,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio6_slaves[] = {
 
 static struct omap_hwmod omap3xxx_gpio6_hwmod = {
 	.name		= "gpio6",
+	.flags		= HWMOD_CONTROL_OPT_CLKS_IN_RESET,
 	.mpu_irqs	= omap3xxx_gpio6_irqs,
 	.mpu_irqs_cnt	= ARRAY_SIZE(omap3xxx_gpio6_irqs),
 	.main_clk	= "gpio6_ick",
@@ -2386,7 +2392,7 @@ static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = {
 static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x48056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x48056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -885,7 +885,7 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_masters[] = {
 static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = {
 	{
 		.pa_start	= 0x4a056000,
-		.pa_end		= 0x4a0560ff,
+		.pa_end		= 0x4a056fff,
 		.flags		= ADDR_TYPE_RT
 	},
 };

arch/arm/mach-omap2/omap_l3_smx.c

@@ -196,11 +196,11 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3)
 		/* No timeout error for debug sources */
 	}
 
-	base = ((l3->rt) + (*(omap3_l3_bases[int_type] + err_source)));
-
 	/* identify the error source */
 	for (err_source = 0; !(status & (1 << err_source)); err_source++)
 									;
+
+	base = l3->rt + *(omap3_l3_bases[int_type] + err_source);
 	error = omap3_l3_readll(base, L3_ERROR_LOG);
 
 	if (error) {

arch/arm/mach-omap2/pm.c

@@ -89,6 +89,7 @@ static void omap2_init_processor_devices(void)
 	if (cpu_is_omap44xx()) {
 		_init_omap_device("l3_main_1", &l3_dev);
 		_init_omap_device("dsp", &dsp_dev);
+		_init_omap_device("iva", &iva_dev);
 	} else {
 		_init_omap_device("l3_main", &l3_dev);
 	}

arch/arm/mach-omap2/voltage.c

@@ -114,7 +114,6 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd)
 	sys_clk_speed /= 1000;
 
 	/* Generic voltage parameters */
-	vdd->curr_volt = 1200000;
 	vdd->volt_scale = vp_forceupdate_scale_voltage;
 	vdd->vp_enabled = false;
 

arch/arm/mach-pxa/hx4700.c

@@ -711,7 +711,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
 		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT|REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
 	.consumer_supplies      = bq24022_consumers,

arch/arm/mach-pxa/magician.c

@@ -599,7 +599,7 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
 static struct regulator_init_data bq24022_init_data = {
 	.constraints = {
 		.max_uA         = 500000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
+		.valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies  = ARRAY_SIZE(bq24022_consumers),
 	.consumer_supplies      = bq24022_consumers,

arch/arm/mach-s3c2440/mach-gta02.c

@@ -409,6 +409,10 @@ struct platform_device s3c24xx_pwm_device = {
 	.num_resources	= 0,
 };
 
+static struct platform_device gta02_dfbmcs320_device = {
+	.name = "dfbmcs320",
+};
+
 static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("pcf50633", 0x73),
@@ -523,6 +527,7 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c_device_iis,
 	&samsung_asoc_dma,
 	&s3c_device_i2c0,
+	&gta02_dfbmcs320_device,
 	&gta02_buttons_device,
 	&s3c_device_adc,
 	&s3c_device_ts,

arch/arm/mach-ux500/board-mop500.c

@@ -178,16 +178,15 @@ static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
 		.irq		= NOMADIK_GPIO_TO_IRQ(217),
 		.platform_data  = &mop500_tc35892_data,
 	},
-};
-
-/* I2C0 devices only available prior to HREFv60 */
-static struct i2c_board_info __initdata mop500_i2c0_old_devices[] = {
+	/* I2C0 devices only available prior to HREFv60 */
 	{
 		I2C_BOARD_INFO("tps61052", 0x33),
 		.platform_data  = &mop500_tps61052_data,
 	},
 };
 
+#define NUM_PRE_V60_I2C0_DEVICES 1
+
 static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	{
 		/* lp5521 LED driver, 1st device */
@@ -425,6 +424,8 @@ static void __init mop500_uart_init(void)
 
 static void __init mop500_init_machine(void)
 {
+	int i2c0_devs;
+
 	/*
 	 * The HREFv60 board removed a GPIO expander and routed
 	 * all these GPIO pins to the internal GPIO controller
@@ -448,11 +449,11 @@ static void __init mop500_init_machine(void)
 
 	platform_device_register(&ab8500_device);
 
-	i2c_register_board_info(0, mop500_i2c0_devices,
-				ARRAY_SIZE(mop500_i2c0_devices));
-	if (!machine_is_hrefv60())
-		i2c_register_board_info(0, mop500_i2c0_old_devices,
-					ARRAY_SIZE(mop500_i2c0_old_devices));
+	i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+	if (machine_is_hrefv60())
+		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+
+	i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 	i2c_register_board_info(2, mop500_i2c2_devices,
 				ARRAY_SIZE(mop500_i2c2_devices));
 }

arch/arm/mm/proc-xscale.S

@@ -395,7 +395,7 @@ ENTRY(xscale_dma_a0_map_area)
 	teq	r2, #DMA_TO_DEVICE
 	beq	xscale_dma_clean_range
 	b	xscale_dma_flush_range
-ENDPROC(xscsale_dma_a0_map_area)
+ENDPROC(xscale_dma_a0_map_area)
 
 /*
  *	dma_unmap_area(start, size, dir)

arch/arm/plat-mxc/gpio.c

@@ -295,6 +295,12 @@ static int mxc_gpio_direction_output(struct gpio_chip *chip,
 	return 0;
 }
 
+/*
+ * This lock class tells lockdep that GPIO irqs are in a different
+ * category than their parents, so it won't report false recursion.
+ */
+static struct lock_class_key gpio_lock_class;
+
 int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 {
 	int i, j;
@@ -311,6 +317,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		__raw_writel(~0, port[i].base + GPIO_ISR);
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
+			irq_set_lockdep_class(j, &gpio_lock_class);
 			irq_set_chip_and_handler(j, &gpio_irq_chip,
 						 handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);

arch/arm/plat-mxc/ssi-fiq.S

@@ -124,6 +124,8 @@ imx_ssi_fiq_start:
 1:
 		@ return from FIQ
 		subs	pc, lr, #4
+
+		.align
 imx_ssi_fiq_base:
 		.word 0x0
 imx_ssi_fiq_rx_buffer:

arch/m68k/mm/motorola.c

@@ -300,6 +300,8 @@ void __init paging_init(void)
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
 		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
+		if (node_present_pages(i))
+			node_set_state(i, N_NORMAL_MEMORY);
 	}
 }
 

arch/parisc/mm/init.c

@@ -266,8 +266,10 @@ static void __init setup_bootmem(void)
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
-	for (i = 0; i < npmem_ranges; i++)
+	for (i = 0; i < npmem_ranges; i++) {
+		node_set_state(i, N_NORMAL_MEMORY);
 		node_set_online(i);
+	}
 #endif
 
 	/*

arch/powerpc/include/asm/8xx_immap.h

@@ -393,8 +393,8 @@ typedef struct fec {
 	uint	fec_addr_low;		/* lower 32 bits of station address	*/
 	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
 	ushort	res1;			/* reserved				*/
-	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
-	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
+	uint	fec_grp_hash_table_high;	/* upper 32-bits of hash table		*/
+	uint	fec_grp_hash_table_low;	/* lower 32-bits of hash table		*/
 	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
 	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
 	uint	fec_r_buff_size;	/* Rx buffer size			*/

arch/powerpc/include/asm/uninorth.h

@@ -60,7 +60,7 @@
  *
  * Obviously, the GART is not cache coherent and so any change to it
  * must be flushed to memory (or maybe just make the GART space non
- * cachable). AGP memory itself does't seem to be cache coherent neither.
+ * cachable). AGP memory itself doesn't seem to be cache coherent neither.
  *
  * In order to invalidate the GART (which is probably necessary to inval
  * the bridge internal TLBs), the following sequence has to be written,

arch/powerpc/kernel/ptrace.c

@@ -933,12 +933,16 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
+	if (ptrace_get_breakpoints(task) < 0)
+		return -ESRCH;
+
 	bp = thread->ptrace_bps[0];
 	if ((!data) || !(data & (DABR_DATA_WRITE | DABR_DATA_READ))) {
 		if (bp) {
 			unregister_hw_breakpoint(bp);
 			thread->ptrace_bps[0] = NULL;
 		}
+		ptrace_put_breakpoints(task);
 		return 0;
 	}
 	if (bp) {
@@ -948,9 +952,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 					(DABR_DATA_WRITE | DABR_DATA_READ),
 							&attr.bp_type);
 		ret =  modify_user_hw_breakpoint(bp, &attr);
-		if (ret)
+		if (ret) {
+			ptrace_put_breakpoints(task);
 			return ret;
+		}
 		thread->ptrace_bps[0] = bp;
+		ptrace_put_breakpoints(task);
 		thread->dabr = data;
 		return 0;
 	}
@@ -965,9 +972,12 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 							ptrace_triggered, task);
 	if (IS_ERR(bp)) {
 		thread->ptrace_bps[0] = NULL;
+		ptrace_put_breakpoints(task);
 		return PTR_ERR(bp);
 	}
 
+	ptrace_put_breakpoints(task);
+
 #endif /* CONFIG_HAVE_HW_BREAKPOINT */
 
 	/* Move contents to the DABR register */

arch/s390/crypto/prng.c

@@ -76,7 +76,7 @@ static void prng_seed(int nbytes)
 
 	/* Add the entropy */
 	while (nbytes >= 8) {
-		*((__u64 *)parm_block) ^= *((__u64 *)buf+i*8);
+		*((__u64 *)parm_block) ^= *((__u64 *)(buf+i));
 		prng_add_entropy();
 		i += 8;
 		nbytes -= 8;

arch/s390/kvm/sie64a.S

@@ -48,10 +48,10 @@ sie_irq_handler:
 	tm	__TI_flags+7(%r2),_TIF_EXIT_SIE
 	jz	0f
 	larl	%r2,sie_exit			# work pending, leave sie
-	stg	%r2,__LC_RETURN_PSW+8
+	stg	%r2,SPI_PSW+8(0,%r15)
 	br	%r14
 0:	larl	%r2,sie_reenter			# re-enter with guest id
-	stg	%r2,__LC_RETURN_PSW+8
+	stg	%r2,SPI_PSW+8(0,%r15)
 1:	br	%r14
 
 /*

arch/s390/mm/fault.c

@@ -543,7 +543,6 @@ static void pfault_interrupt(unsigned int ext_int_code,
 	struct task_struct *tsk;
 	__u16 subcode;
 
-	kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
 	/*
 	 * Get the external interruption subcode & pfault
 	 * initial/completion signal bit. VM stores this 
@@ -553,14 +552,15 @@ static void pfault_interrupt(unsigned int ext_int_code,
 	subcode = ext_int_code >> 16;
 	if ((subcode & 0xff00) != __SUBCODE_MASK)
 		return;
+	kstat_cpu(smp_processor_id()).irqs[EXTINT_PFL]++;
 
 	/*
 	 * Get the token (= address of the task structure of the affected task).
 	 */
 #ifdef CONFIG_64BIT
-	tsk = *(struct task_struct **) param64;
+	tsk = (struct task_struct *) param64;
 #else
-	tsk = *(struct task_struct **) param32;
+	tsk = (struct task_struct *) param32;
 #endif
 
 	if (subcode & 0x0080) {

arch/s390/mm/pageattr.c

@@ -24,12 +24,13 @@ static void change_page_attr(unsigned long addr, int numpages,
 			WARN_ON_ONCE(1);
 			continue;
 		}
-		ptep = pte_offset_kernel(pmdp, addr + i * PAGE_SIZE);
+		ptep = pte_offset_kernel(pmdp, addr);
 
 		pte = *ptep;
 		pte = set(pte);
-		ptep_invalidate(&init_mm, addr + i * PAGE_SIZE, ptep);
+		ptep_invalidate(&init_mm, addr, ptep);
 		*ptep = pte;
+		addr += PAGE_SIZE;
 	}
 }
 

arch/sh/kernel/ptrace_32.c

@@ -117,7 +117,11 @@ void user_enable_single_step(struct task_struct *child)
 
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
+	if (ptrace_get_breakpoints(child) < 0)
+		return;
+
 	set_single_step(child, pc);
+	ptrace_put_breakpoints(child);
 }
 
 void user_disable_single_step(struct task_struct *child)

arch/um/Kconfig.um

@@ -47,7 +47,7 @@ config HOSTFS
 
 config HPPFS
 	tristate "HoneyPot ProcFS (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on EXPERIMENTAL && PROC_FS
 	help
 	  hppfs (HoneyPot ProcFS) is a filesystem which allows UML /proc
 	  entries to be overridden, removed, or fabricated from the host.

arch/um/include/asm/thread_info.h

@@ -49,7 +49,10 @@ static inline struct thread_info *current_thread_info(void)
 {
 	struct thread_info *ti;
 	unsigned long mask = THREAD_SIZE - 1;
-	ti = (struct thread_info *) (((unsigned long) &ti) & ~mask);
+	void *p;
+
+	asm volatile ("" : "=r" (p) : "0" (&ti));
+	ti = (struct thread_info *) (((unsigned long)p) & ~mask);
 	return ti;
 }
 

arch/um/sys-i386/Makefile

@@ -4,7 +4,7 @@
 
 obj-y = bug.o bugs.o checksum.o delay.o fault.o ksyms.o ldt.o ptrace.o \
 	ptrace_user.o setjmp.o signal.o stub.o stub_segv.o syscalls.o sysrq.o \
-	sys_call_table.o tls.o
+	sys_call_table.o tls.o atomic64_cx8_32.o
 
 obj-$(CONFIG_BINFMT_ELF) += elfcore.o
 

arch/um/sys-i386/atomic64_cx8_32.S

@@ -0,0 +1,225 @@
+/*
+ * atomic64_t for 586+
+ *
+ * Copied from arch/x86/lib/atomic64_cx8_32.S
+ *
+ * Copyright © 2010  Luca Barbieri
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/dwarf2.h>
+
+.macro SAVE reg
+	pushl_cfi %\reg
+	CFI_REL_OFFSET \reg, 0
+.endm
+
+.macro RESTORE reg
+	popl_cfi %\reg
+	CFI_RESTORE \reg
+.endm
+
+.macro read64 reg
+	movl %ebx, %eax
+	movl %ecx, %edx
+/* we need LOCK_PREFIX since otherwise cmpxchg8b always does the write */
+	LOCK_PREFIX
+	cmpxchg8b (\reg)
+.endm
+
+ENTRY(atomic64_read_cx8)
+	CFI_STARTPROC
+
+	read64 %ecx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_read_cx8)
+
+ENTRY(atomic64_set_cx8)
+	CFI_STARTPROC
+
+1:
+/* we don't need LOCK_PREFIX since aligned 64-bit writes
+ * are atomic on 586 and newer */
+	cmpxchg8b (%esi)
+	jne 1b
+
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_set_cx8)
+
+ENTRY(atomic64_xchg_cx8)
+	CFI_STARTPROC
+
+	movl %ebx, %eax
+	movl %ecx, %edx
+1:
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_xchg_cx8)
+
+.macro addsub_return func ins insc
+ENTRY(atomic64_\func\()_return_cx8)
+	CFI_STARTPROC
+	SAVE ebp
+	SAVE ebx
+	SAVE esi
+	SAVE edi
+
+	movl %eax, %esi
+	movl %edx, %edi
+	movl %ecx, %ebp
+
+	read64 %ebp
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	\ins\()l %esi, %ebx
+	\insc\()l %edi, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%ebp)
+	jne 1b
+
+10:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE edi
+	RESTORE esi
+	RESTORE ebx
+	RESTORE ebp
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_return_cx8)
+.endm
+
+addsub_return add add adc
+addsub_return sub sub sbb
+
+.macro incdec_return func ins insc
+ENTRY(atomic64_\func\()_return_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	\ins\()l $1, %ebx
+	\insc\()l $0, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+10:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE ebx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_\func\()_return_cx8)
+.endm
+
+incdec_return inc add adc
+incdec_return dec sub sbb
+
+ENTRY(atomic64_dec_if_positive_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	subl $1, %ebx
+	sbb $0, %ecx
+	js 2f
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+2:
+	movl %ebx, %eax
+	movl %ecx, %edx
+	RESTORE ebx
+	ret
+	CFI_ENDPROC
+ENDPROC(atomic64_dec_if_positive_cx8)
+
+ENTRY(atomic64_add_unless_cx8)
+	CFI_STARTPROC
+	SAVE ebp
+	SAVE ebx
+/* these just push these two parameters on the stack */
+	SAVE edi
+	SAVE esi
+
+	movl %ecx, %ebp
+	movl %eax, %esi
+	movl %edx, %edi
+
+	read64 %ebp
+1:
+	cmpl %eax, 0(%esp)
+	je 4f
+2:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	addl %esi, %ebx
+	adcl %edi, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%ebp)
+	jne 1b
+
+	movl $1, %eax
+3:
+	addl $8, %esp
+	CFI_ADJUST_CFA_OFFSET -8
+	RESTORE ebx
+	RESTORE ebp
+	ret
+4:
+	cmpl %edx, 4(%esp)
+	jne 2b
+	xorl %eax, %eax
+	jmp 3b
+	CFI_ENDPROC
+ENDPROC(atomic64_add_unless_cx8)
+
+ENTRY(atomic64_inc_not_zero_cx8)
+	CFI_STARTPROC
+	SAVE ebx
+
+	read64 %esi
+1:
+	testl %eax, %eax
+	je 4f
+2:
+	movl %eax, %ebx
+	movl %edx, %ecx
+	addl $1, %ebx
+	adcl $0, %ecx
+	LOCK_PREFIX
+	cmpxchg8b (%esi)
+	jne 1b
+
+	movl $1, %eax
+3:
+	RESTORE ebx
+	ret
+4:
+	testl %edx, %edx
+	jne 2b
+	jmp 3b
+	CFI_ENDPROC
+ENDPROC(atomic64_inc_not_zero_cx8)

arch/x86/boot/memory.c

@@ -91,7 +91,7 @@ static int detect_memory_e801(void)
 	if (oreg.ax > 15*1024) {
 		return -1;	/* Bogus! */
 	} else if (oreg.ax == 15*1024) {
-		boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax;
+		boot_params.alt_mem_k = (oreg.bx << 6) + oreg.ax;
 	} else {
 		/*
 		 * This ignores memory above 16MB if we have a memory

arch/x86/include/asm/gart.h

@@ -66,7 +66,7 @@ static inline void gart_set_size_and_enable(struct pci_dev *dev, u32 order)
 	 * Don't enable translation but enable GART IO and CPU accesses.
 	 * Also, set DISTLBWALKPRB since GART tables memory is UC.
 	 */
-	ctl = DISTLBWALKPRB | order << 1;
+	ctl = order << 1;
 
 	pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 }
@@ -75,17 +75,17 @@ static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
 {
 	u32 tmp, ctl;
 
-        /* address of the mappings table */
-        addr >>= 12;
-        tmp = (u32) addr<<4;
-        tmp &= ~0xf;
-        pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
-
-        /* Enable GART translation for this hammer. */
-        pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
-        ctl |= GARTEN;
-        ctl &= ~(DISGARTCPU | DISGARTIO);
-        pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
+	/* address of the mappings table */
+	addr >>= 12;
+	tmp = (u32) addr<<4;
+	tmp &= ~0xf;
+	pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
+
+	/* Enable GART translation for this hammer. */
+	pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
+	ctl |= GARTEN | DISTLBWALKPRB;
+	ctl &= ~(DISGARTCPU | DISGARTIO);
+	pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
 }
 
 static inline int aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)

arch/x86/include/asm/io_apic.h

@@ -150,7 +150,7 @@ void setup_IO_APIC_irq_extra(u32 gsi);
 extern void ioapic_and_gsi_init(void);
 extern void ioapic_insert_resources(void);
 
-int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr);
+int io_apic_setup_irq_pin_once(unsigned int irq, int node, struct io_apic_irq_attr *attr);
 
 extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
 extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);

arch/x86/include/asm/numa.h

@@ -51,7 +51,7 @@ static inline void numa_remove_cpu(int cpu)		{ }
 #endif	/* CONFIG_NUMA */
 
 #ifdef CONFIG_DEBUG_PER_CPU_MAPS
-struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable);
+void debug_cpumask_set_cpu(int cpu, int node, bool enable);
 #endif
 
 #endif	/* _ASM_X86_NUMA_H */

arch/x86/kernel/aperture_64.c

@@ -499,7 +499,7 @@ out:
 		 * Don't enable translation yet but enable GART IO and CPU
 		 * accesses and set DISTLBWALKPRB since GART table memory is UC.
 		 */
-		u32 ctl = DISTLBWALKPRB | aper_order << 1;
+		u32 ctl = aper_order << 1;
 
 		bus = amd_nb_bus_dev_ranges[i].bus;
 		dev_base = amd_nb_bus_dev_ranges[i].dev_base;

arch/x86/kernel/apic/io_apic.c

@@ -128,8 +128,8 @@ static int __init parse_noapic(char *str)
 }
 early_param("noapic", parse_noapic);
 
-static int io_apic_setup_irq_pin_once(unsigned int irq, int node,
-				      struct io_apic_irq_attr *attr);
+static int io_apic_setup_irq_pin(unsigned int irq, int node,
+				 struct io_apic_irq_attr *attr);
 
 /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */
 void mp_save_irq(struct mpc_intsrc *m)
@@ -3570,7 +3570,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev)
 }
 #endif /* CONFIG_HT_IRQ */
 
-int
+static int
 io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
 {
 	struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node);
@@ -3585,8 +3585,8 @@ io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr)
 	return ret;
 }
 
-static int io_apic_setup_irq_pin_once(unsigned int irq, int node,
-				      struct io_apic_irq_attr *attr)
+int io_apic_setup_irq_pin_once(unsigned int irq, int node,
+			       struct io_apic_irq_attr *attr)
 {
 	unsigned int id = attr->ioapic, pin = attr->ioapic_pin;
 	int ret;

arch/x86/kernel/apm_32.c

@@ -228,6 +228,7 @@
 #include <linux/kthread.h>
 #include <linux/jiffies.h>
 #include <linux/acpi.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -1238,6 +1239,7 @@ static int suspend(int vetoable)
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
+	syscore_suspend();
 
 	local_irq_enable();
 
@@ -1255,6 +1257,7 @@ static int suspend(int vetoable)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
 
+	syscore_resume();
 	sysdev_resume();
 	local_irq_enable();
 
@@ -1280,6 +1283,7 @@ static void standby(void)
 
 	local_irq_disable();
 	sysdev_suspend(PMSG_SUSPEND);
+	syscore_suspend();
 	local_irq_enable();
 
 	err = set_system_power_state(APM_STATE_STANDBY);
@@ -1287,6 +1291,7 @@ static void standby(void)
 		apm_error("standby", err);
 
 	local_irq_disable();
+	syscore_resume();
 	sysdev_resume();
 	local_irq_enable();
 

arch/x86/kernel/cpu/amd.c

@@ -698,7 +698,7 @@ cpu_dev_register(amd_cpu_dev);
  */
 
 const int amd_erratum_400[] =
-	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
+	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0x0f, 0x4, 0x2, 0xff, 0xf),
 			    AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
 EXPORT_SYMBOL_GPL(amd_erratum_400);
 

arch/x86/kernel/cpu/perf_event.c

@@ -586,8 +586,12 @@ static int x86_setup_perfctr(struct perf_event *event)
 			return -EOPNOTSUPP;
 	}
 
+	/*
+	 * Do not allow config1 (extended registers) to propagate,
+	 * there's no sane user-space generalization yet:
+	 */
 	if (attr->type == PERF_TYPE_RAW)
-		return x86_pmu_extra_regs(event->attr.config, event);
+		return 0;
 
 	if (attr->type == PERF_TYPE_HW_CACHE)
 		return set_ext_hw_attr(hwc, event);
@@ -609,8 +613,8 @@ static int x86_setup_perfctr(struct perf_event *event)
 	/*
 	 * Branch tracing:
 	 */
-	if ((attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS) &&
-	    (hwc->sample_period == 1)) {
+	if (attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS &&
+	    !attr->freq && hwc->sample_period == 1) {
 		/* BTS is not supported by this architecture. */
 		if (!x86_pmu.bts_active)
 			return -EOPNOTSUPP;
@@ -1284,6 +1288,16 @@ static int x86_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
+	/*
+	 * Some chipsets need to unmask the LVTPC in a particular spot
+	 * inside the nmi handler.  As a result, the unmasking was pushed
+	 * into all the nmi handlers.
+	 *
+	 * This generic handler doesn't seem to have any issues where the
+	 * unmasking occurs so it was left at the top.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	for (idx = 0; idx < x86_pmu.num_counters; idx++) {
 		if (!test_bit(idx, cpuc->active_mask)) {
 			/*
@@ -1370,8 +1384,6 @@ perf_event_nmi_handler(struct notifier_block *self,
 		return NOTIFY_DONE;
 	}
 
-	apic_write(APIC_LVTPC, APIC_DM_NMI);
-
 	handled = x86_pmu.handle_irq(args->regs);
 	if (!handled)
 		return NOTIFY_DONE;

arch/x86/kernel/cpu/perf_event_amd.c

@@ -8,7 +8,7 @@ static __initconst const u64 amd_hw_cache_event_ids
  [ C(L1D) ] = {
 	[ C(OP_READ) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0040, /* Data Cache Accesses        */
-		[ C(RESULT_MISS)   ] = 0x0041, /* Data Cache Misses          */
+		[ C(RESULT_MISS)   ] = 0x0141, /* Data Cache Misses          */
 	},
 	[ C(OP_WRITE) ] = {
 		[ C(RESULT_ACCESS) ] = 0x0142, /* Data Cache Refills :system */
@@ -427,7 +427,9 @@ static __initconst const struct x86_pmu amd_pmu = {
  *
  * Exceptions:
  *
+ * 0x000	FP	PERF_CTL[3], PERF_CTL[5:3] (*)
  * 0x003	FP	PERF_CTL[3]
+ * 0x004	FP	PERF_CTL[3], PERF_CTL[5:3] (*)
  * 0x00B	FP	PERF_CTL[3]
  * 0x00D	FP	PERF_CTL[3]
  * 0x023	DE	PERF_CTL[2:0]
@@ -448,6 +450,8 @@ static __initconst const struct x86_pmu amd_pmu = {
  * 0x0DF	LS	PERF_CTL[5:0]
  * 0x1D6	EX	PERF_CTL[5:0]
  * 0x1D8	EX	PERF_CTL[5:0]
+ *
+ * (*) depending on the umask all FPU counters may be used
  */
 
 static struct event_constraint amd_f15_PMC0  = EVENT_CONSTRAINT(0, 0x01, 0);
@@ -460,18 +464,28 @@ static struct event_constraint amd_f15_PMC53 = EVENT_CONSTRAINT(0, 0x38, 0);
 static struct event_constraint *
 amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, struct perf_event *event)
 {
-	unsigned int event_code = amd_get_event_code(&event->hw);
+	struct hw_perf_event *hwc = &event->hw;
+	unsigned int event_code = amd_get_event_code(hwc);
 
 	switch (event_code & AMD_EVENT_TYPE_MASK) {
 	case AMD_EVENT_FP:
 		switch (event_code) {
+		case 0x000:
+			if (!(hwc->config & 0x0000F000ULL))
+				break;
+			if (!(hwc->config & 0x00000F00ULL))
+				break;
+			return &amd_f15_PMC3;
+		case 0x004:
+			if (hweight_long(hwc->config & ARCH_PERFMON_EVENTSEL_UMASK) <= 1)
+				break;
+			return &amd_f15_PMC3;
 		case 0x003:
 		case 0x00B:
 		case 0x00D:
 			return &amd_f15_PMC3;
-		default:
-			return &amd_f15_PMC53;
 		}
+		return &amd_f15_PMC53;
 	case AMD_EVENT_LS:
 	case AMD_EVENT_DC:
 	case AMD_EVENT_EX_LS:

arch/x86/kernel/cpu/perf_event_intel.c

@@ -25,7 +25,7 @@ struct intel_percore {
 /*
  * Intel PerfMon, used on Core and later.
  */
-static const u64 intel_perfmon_event_map[] =
+static u64 intel_perfmon_event_map[PERF_COUNT_HW_MAX] __read_mostly =
 {
   [PERF_COUNT_HW_CPU_CYCLES]		= 0x003c,
   [PERF_COUNT_HW_INSTRUCTIONS]		= 0x00c0,
@@ -184,26 +184,23 @@ static __initconst const u64 snb_hw_cache_event_ids
 	},
  },
  [ C(LL  ) ] = {
-	/*
-	 * TBD: Need Off-core Response Performance Monitoring support
-	 */
 	[ C(OP_READ) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_WRITE) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_RFO.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_RFO.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_PREFETCH) ] = {
-		/* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
  },
  [ C(DTLB) ] = {
@@ -285,26 +282,26 @@ static __initconst const u64 westmere_hw_cache_event_ids
  },
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		/* OFFCORE_RESPONSE_0.ANY_DATA.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.ANY_DATA.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.ANY_DATA.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.ANY_DATA.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	/*
 	 * Use RFO, not WRITEBACK, because a write miss would typically occur
 	 * on RFO.
 	 */
 	[ C(OP_WRITE) ] = {
-		/* OFFCORE_RESPONSE_1.ANY_RFO.LOCAL_CACHE */
-		[ C(RESULT_ACCESS) ] = 0x01bb,
-		/* OFFCORE_RESPONSE_0.ANY_RFO.ANY_LLC_MISS */
+		/* OFFCORE_RESPONSE.ANY_RFO.LOCAL_CACHE */
+		[ C(RESULT_ACCESS) ] = 0x01b7,
+		/* OFFCORE_RESPONSE.ANY_RFO.ANY_LLC_MISS */
 		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
 	[ C(OP_PREFETCH) ] = {
-		/* OFFCORE_RESPONSE_0.PREFETCH.LOCAL_CACHE */
+		/* OFFCORE_RESPONSE.PREFETCH.LOCAL_CACHE */
 		[ C(RESULT_ACCESS) ] = 0x01b7,
-		/* OFFCORE_RESPONSE_1.PREFETCH.ANY_LLC_MISS */
-		[ C(RESULT_MISS)   ] = 0x01bb,
+		/* OFFCORE_RESPONSE.PREFETCH.ANY_LLC_MISS */
+		[ C(RESULT_MISS)   ] = 0x01b7,
 	},
  },
  [ C(DTLB) ] = {
@@ -352,16 +349,36 @@ static __initconst const u64 westmere_hw_cache_event_ids
 };
 
 /*
- * OFFCORE_RESPONSE MSR bits (subset), See IA32 SDM Vol 3 30.6.1.3
+ * Nehalem/Westmere MSR_OFFCORE_RESPONSE bits;
+ * See IA32 SDM Vol 3B 30.6.1.3
  */
 
-#define DMND_DATA_RD     (1 << 0)
-#define DMND_RFO         (1 << 1)
-#define DMND_WB          (1 << 3)
-#define PF_DATA_RD       (1 << 4)
-#define PF_DATA_RFO      (1 << 5)
-#define RESP_UNCORE_HIT  (1 << 8)
-#define RESP_MISS        (0xf600) /* non uncore hit */
+#define NHM_DMND_DATA_RD	(1 << 0)
+#define NHM_DMND_RFO		(1 << 1)
+#define NHM_DMND_IFETCH		(1 << 2)
+#define NHM_DMND_WB		(1 << 3)
+#define NHM_PF_DATA_RD		(1 << 4)
+#define NHM_PF_DATA_RFO		(1 << 5)
+#define NHM_PF_IFETCH		(1 << 6)
+#define NHM_OFFCORE_OTHER	(1 << 7)
+#define NHM_UNCORE_HIT		(1 << 8)
+#define NHM_OTHER_CORE_HIT_SNP	(1 << 9)
+#define NHM_OTHER_CORE_HITM	(1 << 10)
+        			/* reserved */
+#define NHM_REMOTE_CACHE_FWD	(1 << 12)
+#define NHM_REMOTE_DRAM		(1 << 13)
+#define NHM_LOCAL_DRAM		(1 << 14)
+#define NHM_NON_DRAM		(1 << 15)
+
+#define NHM_ALL_DRAM		(NHM_REMOTE_DRAM|NHM_LOCAL_DRAM)
+
+#define NHM_DMND_READ		(NHM_DMND_DATA_RD)
+#define NHM_DMND_WRITE		(NHM_DMND_RFO|NHM_DMND_WB)
+#define NHM_DMND_PREFETCH	(NHM_PF_DATA_RD|NHM_PF_DATA_RFO)
+
+#define NHM_L3_HIT	(NHM_UNCORE_HIT|NHM_OTHER_CORE_HIT_SNP|NHM_OTHER_CORE_HITM)
+#define NHM_L3_MISS	(NHM_NON_DRAM|NHM_ALL_DRAM|NHM_REMOTE_CACHE_FWD)
+#define NHM_L3_ACCESS	(NHM_L3_HIT|NHM_L3_MISS)
 
 static __initconst const u64 nehalem_hw_cache_extra_regs
 				[PERF_COUNT_HW_CACHE_MAX]
@@ -370,16 +387,16 @@ static __initconst const u64 nehalem_hw_cache_extra_regs
 {
  [ C(LL  ) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = DMND_DATA_RD|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = DMND_DATA_RD|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_READ|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_READ|NHM_L3_MISS,
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = DMND_RFO|DMND_WB|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = DMND_RFO|DMND_WB|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_WRITE|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_WRITE|NHM_L3_MISS,
 	},
 	[ C(OP_PREFETCH) ] = {
-		[ C(RESULT_ACCESS) ] = PF_DATA_RD|PF_DATA_RFO|RESP_UNCORE_HIT,
-		[ C(RESULT_MISS)   ] = PF_DATA_RD|PF_DATA_RFO|RESP_MISS,
+		[ C(RESULT_ACCESS) ] = NHM_DMND_PREFETCH|NHM_L3_ACCESS,
+		[ C(RESULT_MISS)   ] = NHM_DMND_PREFETCH|NHM_L3_MISS,
 	},
  }
 };
@@ -391,12 +408,12 @@ static __initconst const u64 nehalem_hw_cache_event_ids
 {
  [ C(L1D) ] = {
 	[ C(OP_READ) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f40, /* L1D_CACHE_LD.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0140, /* L1D_CACHE_LD.I_STATE         */
+		[ C(RESULT_ACCESS) ] = 0x010b, /* MEM_INST_RETIRED.LOADS       */
+		[ C(RESULT_MISS)   ] = 0x0151, /* L1D.REPL                     */
 	},
 	[ C(OP_WRITE) ] = {
-		[ C(RESULT_ACCESS) ] = 0x0f41, /* L1D_CACHE_ST.MESI            */
-		[ C(RESULT_MISS)   ] = 0x0141, /* L1D_CACHE_ST.I_STATE         */
+		[ C(RESULT_ACCESS) ] = 0x020b, /* MEM_INST_RETURED.STORES      */
+		[ C(RESULT_MISS)   ] = 0x0251, /* L1D.M_REPL                   */
 	},
 	[ C(OP_PREFETCH) ] = {
 		[ C(RESULT_ACCESS) ] = 0x014e, /* L1D_PREFETCH.REQUESTS        */
@@ -933,6 +950,16 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 
 	cpuc = &__get_cpu_var(cpu_hw_events);
 
+	/*
+	 * Some chipsets need to unmask the LVTPC in a particular spot
+	 * inside the nmi handler.  As a result, the unmasking was pushed
+	 * into all the nmi handlers.
+	 *
+	 * This handler doesn't seem to have any issues with the unmasking
+	 * so it was left at the top.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
+
 	intel_pmu_disable_all();
 	handled = intel_pmu_drain_bts_buffer();
 	status = intel_pmu_get_status();
@@ -998,6 +1025,9 @@ intel_bts_constraints(struct perf_event *event)
 	struct hw_perf_event *hwc = &event->hw;
 	unsigned int hw_event, bts_event;
 
+	if (event->attr.freq)
+		return NULL;
+
 	hw_event = hwc->config & INTEL_ARCH_EVENT_MASK;
 	bts_event = x86_pmu.event_map(PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
 
@@ -1305,7 +1335,7 @@ static void intel_clovertown_quirks(void)
 	 * AJ106 could possibly be worked around by not allowing LBR
 	 *       usage from PEBS, including the fixup.
 	 * AJ68  could possibly be worked around by always programming
-	 * 	 a pebs_event_reset[0] value and coping with the lost events.
+	 *	 a pebs_event_reset[0] value and coping with the lost events.
 	 *
 	 * But taken together it might just make sense to not enable PEBS on
 	 * these chips.
@@ -1409,6 +1439,18 @@ static __init int intel_pmu_init(void)
 		x86_pmu.percore_constraints = intel_nehalem_percore_constraints;
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.extra_regs = intel_nehalem_extra_regs;
+
+		if (ebx & 0x40) {
+			/*
+			 * Erratum AAJ80 detected, we work it around by using
+			 * the BR_MISP_EXEC.ANY event. This will over-count
+			 * branch-misses, but it's still much better than the
+			 * architectural event which is often completely bogus:
+			 */
+			intel_perfmon_event_map[PERF_COUNT_HW_BRANCH_MISSES] = 0x7f89;
+
+			pr_cont("erratum AAJ80 worked around, ");
+		}
 		pr_cont("Nehalem events, ");
 		break;
 
@@ -1425,6 +1467,7 @@ static __init int intel_pmu_init(void)
 
 	case 37: /* 32 nm nehalem, "Clarkdale" */
 	case 44: /* 32 nm nehalem, "Gulftown" */
+	case 47: /* 32 nm Xeon E7 */
 		memcpy(hw_cache_event_ids, westmere_hw_cache_event_ids,
 		       sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, nehalem_hw_cache_extra_regs,

arch/x86/kernel/cpu/perf_event_p4.c

@@ -947,14 +947,23 @@ static int p4_pmu_handle_irq(struct pt_regs *regs)
 		if (!x86_perf_event_set_period(event))
 			continue;
 		if (perf_event_overflow(event, 1, &data, regs))
-			p4_pmu_disable_event(event);
+			x86_pmu_stop(event, 0);
 	}
 
-	if (handled) {
-		/* p4 quirk: unmask it again */
-		apic_write(APIC_LVTPC, apic_read(APIC_LVTPC) & ~APIC_LVT_MASKED);
+	if (handled)
 		inc_irq_stat(apic_perf_irqs);
-	}
+
+	/*
+	 * When dealing with the unmasking of the LVTPC on P4 perf hw, it has
+	 * been observed that the OVF bit flag has to be cleared first _before_
+	 * the LVTPC can be unmasked.
+	 *
+	 * The reason is the NMI line will continue to be asserted while the OVF
+	 * bit is set.  This causes a second NMI to generate if the LVTPC is
+	 * unmasked before the OVF bit is cleared, leading to unknown NMI
+	 * messages.
+	 */
+	apic_write(APIC_LVTPC, APIC_DM_NMI);
 
 	return handled;
 }

arch/x86/kernel/devicetree.c

@@ -391,7 +391,7 @@ static int ioapic_xlate(struct irq_domain *id, const u32 *intspec, u32 intsize,
 
 	set_io_apic_irq_attr(&attr, idx, line, it->trigger, it->polarity);
 
-	return io_apic_setup_irq_pin(*out_hwirq, cpu_to_node(0), &attr);
+	return io_apic_setup_irq_pin_once(*out_hwirq, cpu_to_node(0), &attr);
 }
 
 static void __init ioapic_add_ofnode(struct device_node *np)

arch/x86/kernel/pci-gart_64.c

@@ -81,6 +81,9 @@ static u32 gart_unmapped_entry;
 #define AGPEXTERN
 #endif
 
+/* GART can only remap to physical addresses < 1TB */
+#define GART_MAX_PHYS_ADDR	(1ULL << 40)
+
 /* backdoor interface to AGP driver */
 AGPEXTERN int agp_memory_reserved;
 AGPEXTERN __u32 *agp_gatt_table;
@@ -212,9 +215,13 @@ static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 				size_t size, int dir, unsigned long align_mask)
 {
 	unsigned long npages = iommu_num_pages(phys_mem, size, PAGE_SIZE);
-	unsigned long iommu_page = alloc_iommu(dev, npages, align_mask);
+	unsigned long iommu_page;
 	int i;
 
+	if (unlikely(phys_mem + size > GART_MAX_PHYS_ADDR))
+		return bad_dma_addr;
+
+	iommu_page = alloc_iommu(dev, npages, align_mask);
 	if (iommu_page == -1) {
 		if (!nonforced_iommu(dev, phys_mem, size))
 			return phys_mem;

arch/x86/kernel/ptrace.c

@@ -608,6 +608,9 @@ static int ptrace_write_dr7(struct task_struct *tsk, unsigned long data)
 	unsigned len, type;
 	struct perf_event *bp;
 
+	if (ptrace_get_breakpoints(tsk) < 0)
+		return -ESRCH;
+
 	data &= ~DR_CONTROL_RESERVED;
 	old_dr7 = ptrace_get_dr7(thread->ptrace_bps);
 restore:
@@ -655,6 +658,9 @@ restore:
 		}
 		goto restore;
 	}
+
+	ptrace_put_breakpoints(tsk);
+
 	return ((orig_ret < 0) ? orig_ret : rc);
 }
 
@@ -668,10 +674,17 @@ static unsigned long ptrace_get_debugreg(struct task_struct *tsk, int n)
 
 	if (n < HBP_NUM) {
 		struct perf_event *bp;
+
+		if (ptrace_get_breakpoints(tsk) < 0)
+			return -ESRCH;
+
 		bp = thread->ptrace_bps[n];
 		if (!bp)
-			return 0;
-		val = bp->hw.info.address;
+			val = 0;
+		else
+			val = bp->hw.info.address;
+
+		ptrace_put_breakpoints(tsk);
 	} else if (n == 6) {
 		val = thread->debugreg6;
 	 } else if (n == 7) {
@@ -686,6 +699,10 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 	struct perf_event *bp;
 	struct thread_struct *t = &tsk->thread;
 	struct perf_event_attr attr;
+	int err = 0;
+
+	if (ptrace_get_breakpoints(tsk) < 0)
+		return -ESRCH;
 
 	if (!t->ptrace_bps[nr]) {
 		ptrace_breakpoint_init(&attr);
@@ -709,24 +726,23 @@ static int ptrace_set_breakpoint_addr(struct task_struct *tsk, int nr,
 		 * writing for the user. And anyway this is the previous
 		 * behaviour.
 		 */
-		if (IS_ERR(bp))
-			return PTR_ERR(bp);
+		if (IS_ERR(bp)) {
+			err = PTR_ERR(bp);
+			goto put;
+		}
 
 		t->ptrace_bps[nr] = bp;
 	} else {
-		int err;
-
 		bp = t->ptrace_bps[nr];
 
 		attr = bp->attr;
 		attr.bp_addr = addr;
 		err = modify_user_hw_breakpoint(bp, &attr);
-		if (err)
-			return err;
 	}
 
-
-	return 0;
+put:
+	ptrace_put_breakpoints(tsk);
+	return err;
 }
 
 /*

arch/x86/kernel/reboot_32.S

@@ -21,26 +21,26 @@ r_base = .
 	/* Get our own relocated address */
 	call	1f
 1:	popl	%ebx
-	subl	$1b, %ebx
+	subl	$(1b - r_base), %ebx
 
 	/* Compute the equivalent real-mode segment */
 	movl	%ebx, %ecx
 	shrl	$4, %ecx
 	
 	/* Patch post-real-mode segment jump */
-	movw	dispatch_table(%ebx,%eax,2),%ax
-	movw	%ax, 101f(%ebx)
-	movw	%cx, 102f(%ebx)
+	movw	(dispatch_table - r_base)(%ebx,%eax,2),%ax
+	movw	%ax, (101f - r_base)(%ebx)
+	movw	%cx, (102f - r_base)(%ebx)
 
 	/* Set up the IDT for real mode. */
-	lidtl	machine_real_restart_idt(%ebx)
+	lidtl	(machine_real_restart_idt - r_base)(%ebx)
 
 	/*
 	 * Set up a GDT from which we can load segment descriptors for real
 	 * mode.  The GDT is not used in real mode; it is just needed here to
 	 * prepare the descriptors.
 	 */
-	lgdtl	machine_real_restart_gdt(%ebx)
+	lgdtl	(machine_real_restart_gdt - r_base)(%ebx)
 
 	/*
 	 * Load the data segment registers with 16-bit compatible values

arch/x86/kernel/smpboot.c

@@ -312,26 +312,6 @@ void __cpuinit smp_store_cpu_info(int id)
 		identify_secondary_cpu(c);
 }
 
-static void __cpuinit check_cpu_siblings_on_same_node(int cpu1, int cpu2)
-{
-	int node1 = early_cpu_to_node(cpu1);
-	int node2 = early_cpu_to_node(cpu2);
-
-	/*
-	 * Our CPU scheduler assumes all logical cpus in the same physical cpu
-	 * share the same node. But, buggy ACPI or NUMA emulation might assign
-	 * them to different node. Fix it.
-	 */
-	if (node1 != node2) {
-		pr_warning("CPU %d in node %d and CPU %d in node %d are in the same physical CPU. forcing same node %d\n",
-			   cpu1, node1, cpu2, node2, node2);
-
-		numa_remove_cpu(cpu1);
-		numa_set_node(cpu1, node2);
-		numa_add_cpu(cpu1);
-	}
-}
-
 static void __cpuinit link_thread_siblings(int cpu1, int cpu2)
 {
 	cpumask_set_cpu(cpu1, cpu_sibling_mask(cpu2));
@@ -340,7 +320,6 @@ static void __cpuinit link_thread_siblings(int cpu1, int cpu2)
 	cpumask_set_cpu(cpu2, cpu_core_mask(cpu1));
 	cpumask_set_cpu(cpu1, cpu_llc_shared_mask(cpu2));
 	cpumask_set_cpu(cpu2, cpu_llc_shared_mask(cpu1));
-	check_cpu_siblings_on_same_node(cpu1, cpu2);
 }
 
 
@@ -382,12 +361,10 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
 			cpumask_set_cpu(i, cpu_llc_shared_mask(cpu));
 			cpumask_set_cpu(cpu, cpu_llc_shared_mask(i));
-			check_cpu_siblings_on_same_node(cpu, i);
 		}
 		if (c->phys_proc_id == cpu_data(i).phys_proc_id) {
 			cpumask_set_cpu(i, cpu_core_mask(cpu));
 			cpumask_set_cpu(cpu, cpu_core_mask(i));
-			check_cpu_siblings_on_same_node(cpu, i);
 			/*
 			 *  Does this new cpu bringup a new core?
 			 */

arch/x86/mm/numa.c

@@ -213,53 +213,48 @@ int early_cpu_to_node(int cpu)
 	return per_cpu(x86_cpu_to_node_map, cpu);
 }
 
-struct cpumask __cpuinit *debug_cpumask_set_cpu(int cpu, int enable)
+void debug_cpumask_set_cpu(int cpu, int node, bool enable)
 {
-	int node = early_cpu_to_node(cpu);
 	struct cpumask *mask;
 	char buf[64];
 
 	if (node == NUMA_NO_NODE) {
 		/* early_cpu_to_node() already emits a warning and trace */
-		return NULL;
+		return;
 	}
 	mask = node_to_cpumask_map[node];
 	if (!mask) {
 		pr_err("node_to_cpumask_map[%i] NULL\n", node);
 		dump_stack();
-		return NULL;
+		return;
 	}
 
+	if (enable)
+		cpumask_set_cpu(cpu, mask);
+	else
+		cpumask_clear_cpu(cpu, mask);
+
 	cpulist_scnprintf(buf, sizeof(buf), mask);
 	printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n",
 		enable ? "numa_add_cpu" : "numa_remove_cpu",
 		cpu, node, buf);
-	return mask;
+	return;
 }
 
 # ifndef CONFIG_NUMA_EMU
-static void __cpuinit numa_set_cpumask(int cpu, int enable)
+static void __cpuinit numa_set_cpumask(int cpu, bool enable)
 {
-	struct cpumask *mask;
-
-	mask = debug_cpumask_set_cpu(cpu, enable);
-	if (!mask)
-		return;
-
-	if (enable)
-		cpumask_set_cpu(cpu, mask);
-	else
-		cpumask_clear_cpu(cpu, mask);
+	debug_cpumask_set_cpu(cpu, early_cpu_to_node(cpu), enable);
 }
 
 void __cpuinit numa_add_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 1);
+	numa_set_cpumask(cpu, true);
 }
 
 void __cpuinit numa_remove_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 0);
+	numa_set_cpumask(cpu, false);
 }
 # endif	/* !CONFIG_NUMA_EMU */
 

arch/x86/mm/numa_64.c

@@ -306,7 +306,7 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi)
 		bi->end = min(bi->end, high);
 
 		/* and there's no empty block */
-		if (bi->start == bi->end) {
+		if (bi->start >= bi->end) {
 			numa_remove_memblk_from(i--, mi);
 			continue;
 		}

arch/x86/mm/numa_emulation.c

@@ -454,10 +454,9 @@ void __cpuinit numa_remove_cpu(int cpu)
 		cpumask_clear_cpu(cpu, node_to_cpumask_map[i]);
 }
 #else	/* !CONFIG_DEBUG_PER_CPU_MAPS */
-static void __cpuinit numa_set_cpumask(int cpu, int enable)
+static void __cpuinit numa_set_cpumask(int cpu, bool enable)
 {
-	struct cpumask *mask;
-	int nid, physnid, i;
+	int nid, physnid;
 
 	nid = early_cpu_to_node(cpu);
 	if (nid == NUMA_NO_NODE) {
@@ -467,28 +466,21 @@ static void __cpuinit numa_set_cpumask(int cpu, int enable)
 
 	physnid = emu_nid_to_phys[nid];
 
-	for_each_online_node(i) {
+	for_each_online_node(nid) {
 		if (emu_nid_to_phys[nid] != physnid)
 			continue;
 
-		mask = debug_cpumask_set_cpu(cpu, enable);
-		if (!mask)
-			return;
-
-		if (enable)
-			cpumask_set_cpu(cpu, mask);
-		else
-			cpumask_clear_cpu(cpu, mask);
+		debug_cpumask_set_cpu(cpu, nid, enable);
 	}
 }
 
 void __cpuinit numa_add_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 1);
+	numa_set_cpumask(cpu, true);
 }
 
 void __cpuinit numa_remove_cpu(int cpu)
 {
-	numa_set_cpumask(cpu, 0);
+	numa_set_cpumask(cpu, false);
 }
 #endif	/* !CONFIG_DEBUG_PER_CPU_MAPS */

arch/x86/platform/ce4100/falconfalls.dts

@@ -347,7 +347,7 @@
 						   "pciclass0c03";
 
 					reg = <0x16800 0x0 0x0 0x0 0x0>;
-					interrupts = <22 3>;
+					interrupts = <22 1>;
 				};
 
 				usb@d,1 {
@@ -357,7 +357,7 @@
 						   "pciclass0c03";
 
 					reg = <0x16900 0x0 0x0 0x0 0x0>;
-					interrupts = <22 3>;
+					interrupts = <22 1>;
 				};
 
 				sata@e,0 {
@@ -367,7 +367,7 @@
 						   "pciclass0106";
 
 					reg = <0x17000 0x0 0x0 0x0 0x0>;
-					interrupts = <23 3>;
+					interrupts = <23 1>;
 				};
 
 				flash@f,0 {

arch/x86/xen/mmu.c

@@ -1463,6 +1463,119 @@ static int xen_pgd_alloc(struct mm_struct *mm)
 	return ret;
 }
 
+#ifdef CONFIG_X86_64
+static __initdata u64 __last_pgt_set_rw = 0;
+static __initdata u64 __pgt_buf_start = 0;
+static __initdata u64 __pgt_buf_end = 0;
+static __initdata u64 __pgt_buf_top = 0;
+/*
+ * As a consequence of the commit:
+ * 
+ * commit 4b239f458c229de044d6905c2b0f9fe16ed9e01e
+ * Author: Yinghai Lu <yinghai@kernel.org>
+ * Date:   Fri Dec 17 16:58:28 2010 -0800
+ * 
+ *     x86-64, mm: Put early page table high
+ * 
+ * at some point init_memory_mapping is going to reach the pagetable pages
+ * area and map those pages too (mapping them as normal memory that falls
+ * in the range of addresses passed to init_memory_mapping as argument).
+ * Some of those pages are already pagetable pages (they are in the range
+ * pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and
+ * everything is fine.
+ * Some of these pages are not pagetable pages yet (they fall in the range
+ * pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
+ * are going to be mapped RW.  When these pages become pagetable pages and
+ * are hooked into the pagetable, xen will find that the guest has already
+ * a RW mapping of them somewhere and fail the operation.
+ * The reason Xen requires pagetables to be RO is that the hypervisor needs
+ * to verify that the pagetables are valid before using them. The validation
+ * operations are called "pinning".
+ * 
+ * In order to fix the issue we mark all the pages in the entire range
+ * pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
+ * is completed only the range pgt_buf_start-pgt_buf_end is reserved by
+ * init_memory_mapping. Hence the kernel is going to crash as soon as one
+ * of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
+ * ranges are RO).
+ * 
+ * For this reason, 'mark_rw_past_pgt' is introduced which is called _after_
+ * the init_memory_mapping has completed (in a perfect world we would
+ * call this function from init_memory_mapping, but lets ignore that).
+ * 
+ * Because we are called _after_ init_memory_mapping the pgt_buf_[start,
+ * end,top] have all changed to new values (b/c init_memory_mapping
+ * is called and setting up another new page-table). Hence, the first time
+ * we enter this function, we save away the pgt_buf_start value and update
+ * the pgt_buf_[end,top].
+ * 
+ * When we detect that the "old" pgt_buf_start through pgt_buf_end
+ * PFNs have been reserved (so memblock_x86_reserve_range has been called),
+ * we immediately set out to RW the "old" pgt_buf_end through pgt_buf_top.
+ * 
+ * And then we update those "old" pgt_buf_[end|top] with the new ones
+ * so that we can redo this on the next pagetable.
+ */
+static __init void mark_rw_past_pgt(void) {
+
+	if (pgt_buf_end > pgt_buf_start) {
+		u64 addr, size;
+
+		/* Save it away. */
+		if (!__pgt_buf_start) {
+			__pgt_buf_start = pgt_buf_start;
+			__pgt_buf_end = pgt_buf_end;
+			__pgt_buf_top = pgt_buf_top;
+			return;
+		}
+		/* If we get the range that starts at __pgt_buf_end that means
+		 * the range is reserved, and that in 'init_memory_mapping'
+		 * the 'memblock_x86_reserve_range' has been called with the
+		 * outdated __pgt_buf_start, __pgt_buf_end (the "new"
+		 * pgt_buf_[start|end|top] refer now to a new pagetable.
+		 * Note: we are called _after_ the pgt_buf_[..] have been
+		 * updated.*/
+
+		addr = memblock_x86_find_in_range_size(PFN_PHYS(__pgt_buf_start),
+						       &size, PAGE_SIZE);
+
+		/* Still not reserved, meaning 'memblock_x86_reserve_range'
+		 * hasn't been called yet. Update the _end and _top.*/
+		if (addr == PFN_PHYS(__pgt_buf_start)) {
+			__pgt_buf_end = pgt_buf_end;
+			__pgt_buf_top = pgt_buf_top;
+			return;
+		}
+
+		/* OK, the area is reserved, meaning it is time for us to
+		 * set RW for the old end->top PFNs. */
+
+		/* ..unless we had already done this. */
+		if (__pgt_buf_end == __last_pgt_set_rw)
+			return;
+
+		addr = PFN_PHYS(__pgt_buf_end);
+		
+		/* set as RW the rest */
+		printk(KERN_DEBUG "xen: setting RW the range %llx - %llx\n",
+			PFN_PHYS(__pgt_buf_end), PFN_PHYS(__pgt_buf_top));
+		
+		while (addr < PFN_PHYS(__pgt_buf_top)) {
+			make_lowmem_page_readwrite(__va(addr));
+			addr += PAGE_SIZE;
+		}
+		/* And update everything so that we are ready for the next
+		 * pagetable (the one created for regions past 4GB) */
+		__last_pgt_set_rw = __pgt_buf_end;
+		__pgt_buf_start = pgt_buf_start;
+		__pgt_buf_end = pgt_buf_end;
+		__pgt_buf_top = pgt_buf_top;
+	}
+	return;
+}
+#else
+static __init void mark_rw_past_pgt(void) { }
+#endif
 static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
 #ifdef CONFIG_X86_64
@@ -1473,17 +1586,29 @@ static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
 #endif
 }
 
+#ifdef CONFIG_X86_32
 static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 {
-	unsigned long pfn = pte_pfn(pte);
-
-#ifdef CONFIG_X86_32
 	/* If there's an existing pte, then don't allow _PAGE_RW to be set */
 	if (pte_val_ma(*ptep) & _PAGE_PRESENT)
 		pte = __pte_ma(((pte_val_ma(*ptep) & _PAGE_RW) | ~_PAGE_RW) &
 			       pte_val_ma(pte));
-#endif
+
+	return pte;
+}
+#else /* CONFIG_X86_64 */
+static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
+{
+	unsigned long pfn = pte_pfn(pte);
 
+	/*
+	 * A bit of optimization. We do not need to call the workaround
+	 * when xen_set_pte_init is called with a PTE with 0 as PFN.
+	 * That is b/c the pagetable at that point are just being populated
+	 * with empty values and we can save some cycles by not calling
+	 * the 'memblock' code.*/
+	if (pfn)
+		mark_rw_past_pgt();
 	/*
 	 * If the new pfn is within the range of the newly allocated
 	 * kernel pagetable, and it isn't being mapped into an
@@ -1491,12 +1616,13 @@ static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte)
 	 * it is RO.
 	 */
 	if (((!is_early_ioremap_ptep(ptep) &&
-			pfn >= pgt_buf_start && pfn < pgt_buf_end)) ||
+			pfn >= pgt_buf_start && pfn < pgt_buf_top)) ||
 			(is_early_ioremap_ptep(ptep) && pfn != (pgt_buf_end - 1)))
 		pte = pte_wrprotect(pte);
 
 	return pte;
 }
+#endif /* CONFIG_X86_64 */
 
 /* Init-time set_pte while constructing initial pagetables, which
    doesn't allow RO pagetable pages to be remapped RW */
@@ -1992,6 +2118,8 @@ __init void xen_ident_map_ISA(void)
 
 static __init void xen_post_allocator_init(void)
 {
+	mark_rw_past_pgt();
+
 #ifdef CONFIG_XEN_DEBUG
 	pv_mmu_ops.make_pte = PV_CALLEE_SAVE(xen_make_pte_debug);
 #endif