|
@@ -35,11 +35,9 @@
|
|
|
#include <linux/clk.h>
|
|
|
#include <linux/cpufreq.h>
|
|
|
|
|
|
-#include <mach/hardware.h>
|
|
|
#include <asm/irq.h>
|
|
|
#include <asm/io.h>
|
|
|
|
|
|
-#include <mach/regs-gpio.h>
|
|
|
#include <asm/plat-s3c/regs-iic.h>
|
|
|
#include <asm/plat-s3c/iic.h>
|
|
|
|
|
@@ -63,6 +61,7 @@ struct s3c24xx_i2c {
|
|
|
unsigned int msg_ptr;
|
|
|
|
|
|
unsigned int tx_setup;
|
|
|
+ unsigned int irq;
|
|
|
|
|
|
enum s3c24xx_i2c_state state;
|
|
|
unsigned long clkrate;
|
|
@@ -70,7 +69,6 @@ struct s3c24xx_i2c {
|
|
|
void __iomem *regs;
|
|
|
struct clk *clk;
|
|
|
struct device *dev;
|
|
|
- struct resource *irq;
|
|
|
struct resource *ioarea;
|
|
|
struct i2c_adapter adap;
|
|
|
|
|
@@ -79,16 +77,7 @@ struct s3c24xx_i2c {
|
|
|
#endif
|
|
|
};
|
|
|
|
|
|
-/* default platform data to use if not supplied in the platform_device
|
|
|
-*/
|
|
|
-
|
|
|
-static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = {
|
|
|
- .flags = 0,
|
|
|
- .slave_addr = 0x10,
|
|
|
- .bus_freq = 100*1000,
|
|
|
- .max_freq = 400*1000,
|
|
|
- .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
|
|
|
-};
|
|
|
+/* default platform data removed, dev should always carry data. */
|
|
|
|
|
|
/* s3c24xx_i2c_is2440()
|
|
|
*
|
|
@@ -102,21 +91,6 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c)
|
|
|
return !strcmp(pdev->name, "s3c2440-i2c");
|
|
|
}
|
|
|
|
|
|
-
|
|
|
-/* s3c24xx_i2c_get_platformdata
|
|
|
- *
|
|
|
- * get the platform data associated with the given device, or return
|
|
|
- * the default if there is none
|
|
|
-*/
|
|
|
-
|
|
|
-static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev)
|
|
|
-{
|
|
|
- if (dev->platform_data != NULL)
|
|
|
- return (struct s3c2410_platform_i2c *)dev->platform_data;
|
|
|
-
|
|
|
- return &s3c24xx_i2c_default_platform;
|
|
|
-}
|
|
|
-
|
|
|
/* s3c24xx_i2c_master_complete
|
|
|
*
|
|
|
* complete the message and wake up the caller, using the given return code,
|
|
@@ -129,7 +103,7 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
|
|
|
|
|
|
i2c->msg_ptr = 0;
|
|
|
i2c->msg = NULL;
|
|
|
- i2c->msg_idx ++;
|
|
|
+ i2c->msg_idx++;
|
|
|
i2c->msg_num = 0;
|
|
|
if (ret)
|
|
|
i2c->msg_idx = ret;
|
|
@@ -140,19 +114,17 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
|
|
|
static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
|
|
|
{
|
|
|
unsigned long tmp;
|
|
|
-
|
|
|
+
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
|
|
|
-
|
|
|
}
|
|
|
|
|
|
static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
|
|
|
{
|
|
|
unsigned long tmp;
|
|
|
-
|
|
|
+
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
|
|
|
-
|
|
|
}
|
|
|
|
|
|
/* irq enable/disable functions */
|
|
@@ -160,7 +132,7 @@ static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
|
|
|
static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
|
|
|
{
|
|
|
unsigned long tmp;
|
|
|
-
|
|
|
+
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
|
|
|
}
|
|
@@ -168,7 +140,7 @@ static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
|
|
|
static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
|
|
|
{
|
|
|
unsigned long tmp;
|
|
|
-
|
|
|
+
|
|
|
tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
|
|
|
}
|
|
@@ -176,10 +148,10 @@ static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
|
|
|
|
|
|
/* s3c24xx_i2c_message_start
|
|
|
*
|
|
|
- * put the start of a message onto the bus
|
|
|
+ * put the start of a message onto the bus
|
|
|
*/
|
|
|
|
|
|
-static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
|
|
|
+static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
|
|
|
struct i2c_msg *msg)
|
|
|
{
|
|
|
unsigned int addr = (msg->addr & 0x7f) << 1;
|
|
@@ -198,15 +170,15 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
|
|
|
if (msg->flags & I2C_M_REV_DIR_ADDR)
|
|
|
addr ^= 1;
|
|
|
|
|
|
- // todo - check for wether ack wanted or not
|
|
|
+ /* todo - check for wether ack wanted or not */
|
|
|
s3c24xx_i2c_enable_ack(i2c);
|
|
|
|
|
|
iiccon = readl(i2c->regs + S3C2410_IICCON);
|
|
|
writel(stat, i2c->regs + S3C2410_IICSTAT);
|
|
|
-
|
|
|
+
|
|
|
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
|
|
|
writeb(addr, i2c->regs + S3C2410_IICDS);
|
|
|
-
|
|
|
+
|
|
|
/* delay here to ensure the data byte has gotten onto the bus
|
|
|
* before the transaction is started */
|
|
|
|
|
@@ -214,8 +186,8 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
|
|
|
|
|
|
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
|
|
|
writel(iiccon, i2c->regs + S3C2410_IICCON);
|
|
|
-
|
|
|
- stat |= S3C2410_IICSTAT_START;
|
|
|
+
|
|
|
+ stat |= S3C2410_IICSTAT_START;
|
|
|
writel(stat, i2c->regs + S3C2410_IICSTAT);
|
|
|
}
|
|
|
|
|
@@ -226,11 +198,11 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
|
|
|
dev_dbg(i2c->dev, "STOP\n");
|
|
|
|
|
|
/* stop the transfer */
|
|
|
- iicstat &= ~ S3C2410_IICSTAT_START;
|
|
|
+ iicstat &= ~S3C2410_IICSTAT_START;
|
|
|
writel(iicstat, i2c->regs + S3C2410_IICSTAT);
|
|
|
-
|
|
|
+
|
|
|
i2c->state = STATE_STOP;
|
|
|
-
|
|
|
+
|
|
|
s3c24xx_i2c_master_complete(i2c, ret);
|
|
|
s3c24xx_i2c_disable_irq(i2c);
|
|
|
}
|
|
@@ -240,7 +212,7 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
|
|
|
|
|
|
/* is_lastmsg()
|
|
|
*
|
|
|
- * returns TRUE if the current message is the last in the set
|
|
|
+ * returns TRUE if the current message is the last in the set
|
|
|
*/
|
|
|
|
|
|
static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
|
|
@@ -288,14 +260,14 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
|
|
|
case STATE_STOP:
|
|
|
dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
|
|
|
- s3c24xx_i2c_disable_irq(i2c);
|
|
|
+ s3c24xx_i2c_disable_irq(i2c);
|
|
|
goto out_ack;
|
|
|
|
|
|
case STATE_START:
|
|
|
/* last thing we did was send a start condition on the
|
|
|
* bus, or started a new i2c message
|
|
|
*/
|
|
|
-
|
|
|
+
|
|
|
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
|
|
|
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
|
|
|
/* ack was not received... */
|
|
@@ -321,7 +293,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
if (i2c->state == STATE_READ)
|
|
|
goto prepare_read;
|
|
|
|
|
|
- /* fall through to the write state, as we will need to
|
|
|
+ /* fall through to the write state, as we will need to
|
|
|
* send a byte as well */
|
|
|
|
|
|
case STATE_WRITE:
|
|
@@ -338,7 +310,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
}
|
|
|
}
|
|
|
|
|
|
- retry_write:
|
|
|
+ retry_write:
|
|
|
|
|
|
if (!is_msgend(i2c)) {
|
|
|
byte = i2c->msg->buf[i2c->msg_ptr++];
|
|
@@ -358,9 +330,9 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
dev_dbg(i2c->dev, "WRITE: Next Message\n");
|
|
|
|
|
|
i2c->msg_ptr = 0;
|
|
|
- i2c->msg_idx ++;
|
|
|
+ i2c->msg_idx++;
|
|
|
i2c->msg++;
|
|
|
-
|
|
|
+
|
|
|
/* check to see if we need to do another message */
|
|
|
if (i2c->msg->flags & I2C_M_NOSTART) {
|
|
|
|
|
@@ -374,7 +346,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
|
|
|
goto retry_write;
|
|
|
} else {
|
|
|
-
|
|
|
/* send the new start */
|
|
|
s3c24xx_i2c_message_start(i2c, i2c->msg);
|
|
|
i2c->state = STATE_START;
|
|
@@ -388,7 +359,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
break;
|
|
|
|
|
|
case STATE_READ:
|
|
|
- /* we have a byte of data in the data register, do
|
|
|
+ /* we have a byte of data in the data register, do
|
|
|
* something with it, and then work out wether we are
|
|
|
* going to do any more read/write
|
|
|
*/
|
|
@@ -396,13 +367,13 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
byte = readb(i2c->regs + S3C2410_IICDS);
|
|
|
i2c->msg->buf[i2c->msg_ptr++] = byte;
|
|
|
|
|
|
- prepare_read:
|
|
|
+ prepare_read:
|
|
|
if (is_msglast(i2c)) {
|
|
|
/* last byte of buffer */
|
|
|
|
|
|
if (is_lastmsg(i2c))
|
|
|
s3c24xx_i2c_disable_ack(i2c);
|
|
|
-
|
|
|
+
|
|
|
} else if (is_msgend(i2c)) {
|
|
|
/* ok, we've read the entire buffer, see if there
|
|
|
* is anything else we need to do */
|
|
@@ -428,7 +399,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
|
|
|
/* acknowlegde the IRQ and get back on with the work */
|
|
|
|
|
|
out_ack:
|
|
|
- tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
+ tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
tmp &= ~S3C2410_IICCON_IRQPEND;
|
|
|
writel(tmp, i2c->regs + S3C2410_IICCON);
|
|
|
out:
|
|
@@ -449,19 +420,19 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
|
|
|
status = readl(i2c->regs + S3C2410_IICSTAT);
|
|
|
|
|
|
if (status & S3C2410_IICSTAT_ARBITR) {
|
|
|
- // deal with arbitration loss
|
|
|
+ /* deal with arbitration loss */
|
|
|
dev_err(i2c->dev, "deal with arbitration loss\n");
|
|
|
}
|
|
|
|
|
|
if (i2c->state == STATE_IDLE) {
|
|
|
dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
|
|
|
|
|
|
- tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
+ tmp = readl(i2c->regs + S3C2410_IICCON);
|
|
|
tmp &= ~S3C2410_IICCON_IRQPEND;
|
|
|
writel(tmp, i2c->regs + S3C2410_IICCON);
|
|
|
goto out;
|
|
|
}
|
|
|
-
|
|
|
+
|
|
|
/* pretty much this leaves us with the fact that we've
|
|
|
* transmitted or received whatever byte we last sent */
|
|
|
|
|
@@ -484,16 +455,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
|
|
|
|
|
|
while (timeout-- > 0) {
|
|
|
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
|
|
|
-
|
|
|
+
|
|
|
if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
|
|
|
return 0;
|
|
|
|
|
|
msleep(1);
|
|
|
}
|
|
|
|
|
|
- dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n",
|
|
|
- __raw_readl(S3C2410_GPEDAT));
|
|
|
-
|
|
|
return -ETIMEDOUT;
|
|
|
}
|
|
|
|
|
@@ -502,7 +470,8 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
|
|
|
* this starts an i2c transfer
|
|
|
*/
|
|
|
|
|
|
-static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num)
|
|
|
+static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
|
|
|
+ struct i2c_msg *msgs, int num)
|
|
|
{
|
|
|
unsigned long timeout;
|
|
|
int ret;
|
|
@@ -528,12 +497,12 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int
|
|
|
s3c24xx_i2c_enable_irq(i2c);
|
|
|
s3c24xx_i2c_message_start(i2c, msgs);
|
|
|
spin_unlock_irq(&i2c->lock);
|
|
|
-
|
|
|
+
|
|
|
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
|
|
|
|
|
|
ret = i2c->msg_idx;
|
|
|
|
|
|
- /* having these next two as dev_err() makes life very
|
|
|
+ /* having these next two as dev_err() makes life very
|
|
|
* noisy when doing an i2cdetect */
|
|
|
|
|
|
if (timeout == 0)
|
|
@@ -590,19 +559,6 @@ static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
|
|
|
.functionality = s3c24xx_i2c_func,
|
|
|
};
|
|
|
|
|
|
-static struct s3c24xx_i2c s3c24xx_i2c = {
|
|
|
- .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock),
|
|
|
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait),
|
|
|
- .tx_setup = 50,
|
|
|
- .adap = {
|
|
|
- .name = "s3c2410-i2c",
|
|
|
- .owner = THIS_MODULE,
|
|
|
- .algo = &s3c24xx_i2c_algorithm,
|
|
|
- .retries = 2,
|
|
|
- .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
|
|
|
- },
|
|
|
-};
|
|
|
-
|
|
|
/* s3c24xx_i2c_calcdivisor
|
|
|
*
|
|
|
* return the divisor settings for a given frequency
|
|
@@ -642,7 +598,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
|
|
|
{
|
|
|
int diff = freq - wanted;
|
|
|
|
|
|
- return (diff >= -2 && diff <= 2);
|
|
|
+ return diff >= -2 && diff <= 2;
|
|
|
}
|
|
|
|
|
|
/* s3c24xx_i2c_clockrate
|
|
@@ -654,7 +610,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted)
|
|
|
|
|
|
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
|
|
|
{
|
|
|
- struct s3c2410_platform_i2c *pdata;
|
|
|
+ struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data;
|
|
|
unsigned long clkin = clk_get_rate(i2c->clk);
|
|
|
unsigned int divs, div1;
|
|
|
u32 iiccon;
|
|
@@ -662,10 +618,8 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
|
|
|
int start, end;
|
|
|
|
|
|
i2c->clkrate = clkin;
|
|
|
-
|
|
|
- pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
|
|
|
clkin /= 1000; /* clkin now in KHz */
|
|
|
-
|
|
|
+
|
|
|
dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n",
|
|
|
pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq);
|
|
|
|
|
@@ -773,7 +727,7 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c)
|
|
|
|
|
|
/* s3c24xx_i2c_init
|
|
|
*
|
|
|
- * initialise the controller, set the IO lines and frequency
|
|
|
+ * initialise the controller, set the IO lines and frequency
|
|
|
*/
|
|
|
|
|
|
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|
@@ -784,15 +738,15 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|
|
|
|
|
/* get the plafrom data */
|
|
|
|
|
|
- pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent);
|
|
|
+ pdata = i2c->dev->platform_data;
|
|
|
|
|
|
/* inititalise the gpio */
|
|
|
|
|
|
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
|
|
|
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
|
|
|
+ if (pdata->cfg_gpio)
|
|
|
+ pdata->cfg_gpio(to_platform_device(i2c->dev));
|
|
|
|
|
|
/* write slave address */
|
|
|
-
|
|
|
+
|
|
|
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
|
|
|
|
|
|
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
|
|
@@ -830,12 +784,32 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
|
|
|
|
|
|
static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|
|
{
|
|
|
- struct s3c24xx_i2c *i2c = &s3c24xx_i2c;
|
|
|
+ struct s3c24xx_i2c *i2c;
|
|
|
struct s3c2410_platform_i2c *pdata;
|
|
|
struct resource *res;
|
|
|
int ret;
|
|
|
|
|
|
- pdata = s3c24xx_i2c_get_platformdata(&pdev->dev);
|
|
|
+ pdata = pdev->dev.platform_data;
|
|
|
+ if (!pdata) {
|
|
|
+ dev_err(&pdev->dev, "no platform data\n");
|
|
|
+ return -EINVAL;
|
|
|
+ }
|
|
|
+
|
|
|
+ i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL);
|
|
|
+ if (!i2c) {
|
|
|
+ dev_err(&pdev->dev, "no memory for state\n");
|
|
|
+ return -ENOMEM;
|
|
|
+ }
|
|
|
+
|
|
|
+ strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
|
|
|
+ i2c->adap.owner = THIS_MODULE;
|
|
|
+ i2c->adap.algo = &s3c24xx_i2c_algorithm;
|
|
|
+ i2c->adap.retries = 2;
|
|
|
+ i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
|
|
|
+ i2c->tx_setup = 50;
|
|
|
+
|
|
|
+ spin_lock_init(&i2c->lock);
|
|
|
+ init_waitqueue_head(&i2c->wait);
|
|
|
|
|
|
/* find the clock and enable it */
|
|
|
|
|
@@ -877,7 +851,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|
|
goto err_ioarea;
|
|
|
}
|
|
|
|
|
|
- dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res);
|
|
|
+ dev_dbg(&pdev->dev, "registers %p (%p, %p)\n",
|
|
|
+ i2c->regs, i2c->ioarea, res);
|
|
|
|
|
|
/* setup info block for the i2c core */
|
|
|
|
|
@@ -891,29 +866,23 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|
|
goto err_iomap;
|
|
|
|
|
|
/* find the IRQ for this unit (note, this relies on the init call to
|
|
|
- * ensure no current IRQs pending
|
|
|
+ * ensure no current IRQs pending
|
|
|
*/
|
|
|
|
|
|
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
|
- if (res == NULL) {
|
|
|
+ i2c->irq = ret = platform_get_irq(pdev, 0);
|
|
|
+ if (ret <= 0) {
|
|
|
dev_err(&pdev->dev, "cannot find IRQ\n");
|
|
|
- ret = -ENOENT;
|
|
|
goto err_iomap;
|
|
|
}
|
|
|
|
|
|
- ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED,
|
|
|
- pdev->name, i2c);
|
|
|
+ ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED,
|
|
|
+ dev_name(&pdev->dev), i2c);
|
|
|
|
|
|
if (ret != 0) {
|
|
|
- dev_err(&pdev->dev, "cannot claim IRQ\n");
|
|
|
+ dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
|
|
|
goto err_iomap;
|
|
|
}
|
|
|
|
|
|
- i2c->irq = res;
|
|
|
-
|
|
|
- dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res,
|
|
|
- (unsigned long)res->start);
|
|
|
-
|
|
|
ret = s3c24xx_i2c_register_cpufreq(i2c);
|
|
|
if (ret < 0) {
|
|
|
dev_err(&pdev->dev, "failed to register cpufreq notifier\n");
|
|
@@ -943,7 +912,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|
|
s3c24xx_i2c_deregister_cpufreq(i2c);
|
|
|
|
|
|
err_irq:
|
|
|
- free_irq(i2c->irq->start, i2c);
|
|
|
+ free_irq(i2c->irq, i2c);
|
|
|
|
|
|
err_iomap:
|
|
|
iounmap(i2c->regs);
|
|
@@ -957,6 +926,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
|
|
|
clk_put(i2c->clk);
|
|
|
|
|
|
err_noclk:
|
|
|
+ kfree(i2c);
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
@@ -972,7 +942,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
|
|
|
s3c24xx_i2c_deregister_cpufreq(i2c);
|
|
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
- free_irq(i2c->irq->start, i2c);
|
|
|
+ free_irq(i2c->irq, i2c);
|
|
|
|
|
|
clk_disable(i2c->clk);
|
|
|
clk_put(i2c->clk);
|
|
@@ -981,6 +951,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
|
|
|
|
|
|
release_resource(i2c->ioarea);
|
|
|
kfree(i2c->ioarea);
|
|
|
+ kfree(i2c);
|
|
|
|
|
|
return 0;
|
|
|
}
|