ath5k: trivial spelling fixes

Fix some comments:
    s/transmition/transmission/
    s/puting/putting/

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath5k/pcu.c

@@ -137,11 +137,11 @@ void ath5k_hw_update_mib_counters(struct ath5k_hw *ah)
  * ath5k_hw_set_ack_bitrate - set bitrate for ACKs
  *
  * @ah: The &struct ath5k_hw
- * @high: Flag to determine if we want to use high transmition rate
+ * @high: Flag to determine if we want to use high transmission rate
  * for ACKs or not
  *
  * If high flag is set, we tell hw to use a set of control rates based on
- * the current transmition rate (check out control_rates array inside reset.c).
+ * the current transmission rate (check out control_rates array inside reset.c).
  * If not hw just uses the lowest rate available for the current modulation
  * scheme being used (1Mbit for CCK and 6Mbits for OFDM).
  */

drivers/net/wireless/ath/ath5k/phy.c

@@ -2987,7 +2987,7 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
 
 
 /*
- * Set transmition power
+ * Set transmission power
  */
 int
 ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,

drivers/net/wireless/ath/ath5k/reset.c

@@ -326,7 +326,7 @@ commit:
  * register). After this MAC and Baseband are
  * disabled and a full reset is needed to come
  * back. This way we save as much power as possible
- * without puting the card on full sleep.
+ * without putting the card on full sleep.
  */
 int ath5k_hw_on_hold(struct ath5k_hw *ah)
 {
@@ -344,7 +344,7 @@ int ath5k_hw_on_hold(struct ath5k_hw *ah)
 	/*
 	 * Put chipset on warm reset...
 	 *
-	 * Note: puting PCI core on warm reset on PCI-E cards
+	 * Note: putting PCI core on warm reset on PCI-E cards
 	 * results card to hang and always return 0xffff... so
 	 * we ingore that flag for PCI-E cards. On PCI cards
 	 * this flag gets cleared after 64 PCI clocks.
@@ -400,7 +400,7 @@ int ath5k_hw_nic_wakeup(struct ath5k_hw *ah, int flags, bool initial)
 	/*
 	 * Put chipset on warm reset...
 	 *
-	 * Note: puting PCI core on warm reset on PCI-E cards
+	 * Note: putting PCI core on warm reset on PCI-E cards
 	 * results card to hang and always return 0xffff... so
 	 * we ingore that flag for PCI-E cards. On PCI cards
 	 * this flag gets cleared after 64 PCI clocks.